LARGE Rugged 30 inch diameter ring - 3/8 inch
thick steel construction - powder coated for a durable and beautiful
finish! 1.25 inch diameter radial arms are chrome-moly hardened.
4 inch diameter wheels use ABEC 5 bearings. Weight is over 70
pounds! Turn near the maximum diameter allowed by your lathe!!
Radial arms move to adjust from 1/2 inch to 23 inch diameter
spindles or bowls for final shaping, sanding or hollowing!
1/2 inch mounting plate with recessed attachment bolt.
Single Lathe Steady $375.00 (plus shipping)
See our website for other configurations and options
Woodturner Pro's new Lamination Pro software
makes it easy to design wood laminations with multi-generations.
However, there is precision needed to cut them properly. Woodturner
Pro has now released the tool to make this precision easy, the
Laminate Laser.
Laminate Laser has a very powerful magnetic
base. The gooseneck is flexible, but requires effort to bend
it. This means that it will stay in position once set and will
not move if bumped.
The Laminate Laser is delivered to you fully
assembled and ready to use. The price of the unit as shown is
$50 US dollars plus shipping.
click
here for more details
New from Alan
Lacer
Glaser and Lacer Skew Chisels
Top shelf heavy weights for greater stability and ease of use.
Made from high wear A-11 tool steel for exceptional edge holding
qualities. If bought in the handled form, they come sharpened
and hand-honed-ready to work. Comes in two sizes: 1-3/8" wide,
3/8" thick , 8" blade with a 3" tang, approximately 24" overall
length with handle; 5/8" wide and 3/8" thick , 7" blade with
a 3" tang, approximately 18" overall length with handle. Handles
are in exotic woods such as bubinga, cocobolo, blood wood, goncalo
alves. Prices are:
- 1-3/8" is $175 handled or $145 unhandled and unsharpened
- 5/8" is $125 handled or $100 unhandled and unsharpened.
Click
here for more details
New from Unique
Tool
(click image for larger size)
Carbide Tipped Lathe Chisels
These fine lathe chisels come with changable carbide tips which
can be rotated as they dull to expose new cutting surfaces.
Tips are 86 Rockwell hardness and finely ground and lapped for
a smooth, long lasting and fine cutting edge. They can be resharpened
with diamond files or ecomonicaly replaced when (and if) they
ever become dull. Rubber grips insulate the user from shock
and discomfort and allow a non-slip grip on the chisel.
There are 6 different tools, each with a different tip; round,
square or triangular. The price is only $34.00 plus shipping.
Click
here for more details!
New from Woodturner
PRO
3D Design PRO
(click image for larger size)
We officially released our new design software entitled 3D
Design PRO. 3DP allows you to simply create a wall profile by
drawing curve points which then shows you the vessel rendered
in 3D. A recent addition to the software allows you to import
a photograph or scanned image of a vessel. You can then create
your wall profile by tracing the profile of the imported object.
Once complete, you can hide the photo and modify your drawing
as you wish.
Download
the free trial version here.
Click
here for more detail
New from Best
Wood Tools
Tool Post Chuck Adapters
Mount your lathe chuck or face plate on your lathes banjo to
securly hold your workpiece for sanding, finishing, or carving.
Click
here for more details
New from Teknatool
International
Dovetail Chisel
The Oneway Wolverine Precision Balancing System
Drastically reduce grinder vibration with
our Precision Balancing System.
Your grinding wheels can now be accurately balanced by you
in your own workshop!
Easy to setup and use, our new balancing
system will quickly and easily allow you to balance your grinding
wheels for life.
Nova Cole Jaw Sets for Nova Mercury Lathe
The Cole Jaws are a versatile set designed primarily for
the re-chucking of bowls to remove the chuck marks or to
re-shape the bottoms of bowls that have already been turned.
The 'mini' version, suitable for use on lathes with a swing
up to 10" (Nova Mercury).
3-on Lathe Mandrel
Finally - a device that allows you to run three buffs simultaneously.
On one end of this 18" mandrel is a machined #2 Morse
taper to fit in the head stock of your lathe; on the other
a center to accept the tail stock. The shaft is 3/4"
in diameter with buff spacing 4" apart. The 3-On Mandrel
lets you quickly and efficiently run small items through
the complete wood buffing process without the distraction
of changing wheels between steps. It may be purchased separately
or in a kit form with buffs, compounds and wax included.
Nova Faceplate Rings
The Nova faceplate rings are designed for use with the
Nova and SuperNova accessories, for when you want to ensure
an extra solid work holding method. The Faceplate Rings
come in three sizes for use on the following popular accessory
jaws:
50mm (std jaws with chuck)
100mm and 130mm.
VL100 Mini Lathe
The all new VL100 lathe has been designed
specifically to suit woodturners' requirements with features
such as higher centre height, extra length between centres
and bolt on extension facility (extensions available in 500mmlengths).
The Vicmarc mini lathe is made of cast iron
for added strength and durability.
Features include . . . Improved Design; Bolt on Extension
Facility; handy draw for storage; Electronic Variable Speed
optional Extra; Taper Roller Bearings available on request
The new Kel McNaugton Hollowing Rig
Designed in response to the need for a superior
torque arrester for hollow form turning, the Kel McNaugton
Hollowing Rig offers real benefits to woodturners.
1.) Allows rake angle of cutting tip to be varied.
2.) Length of exposed cutting bar can be varied to suit
specific requirements.
3.) Accepts all sizes of Kelton Hollowers.
4.) Can be used with Laser wall thickness guide (see below).
5.) Can be used with Kel McNaughton Shear Scrapers to give
fine finishing in deep vessels.
6.) Suitable for large and small lathes.
7.) Available in 2 sizes. Standard for 1/2", 5/8"
and 3/4" hollowers - suitable for small to large vessels
- and Large for 3/4" and 1+1/4" diameter straight
hollowers.
8.) Rig is fitted with the large straight hollower.
9.) Extension boring bar is available.
