New from Advanced Lathe Tools


Finial Tool Rest

Advanced Lathe Tools has just released a set of new finial tool rests. The tool rests were built after being requested by Joe Meirhaeghe.

There are two models, one for standard 1” banjos and one for mini and midi lathes with 5/8” banjos. When you order one of these tool rest, Steve Sinner will cut the standard posts to the length required for your particular brand of lathe before shipping. The mini/midi posts are all 4 7/8” tall, bottom of post to top of rest.

Each rest has a 3/8” case-hardened top rod bedded in and welded to a 5/8” support beam. The rests may be used either right or left on the banjo. Even the smallest hands will easily be able to wrap around the rod and beam to allow finger support of a delicate finial. The groove formed by the top rod bedded into the support beam makes an ideal prop for a gouge-stabilizing thumb.

The mini/midi rest is $50.00, and the standard size is $55.00.

These new finial tool rests are not yet on the Advanced Lathe Tool's web site but you can reach Steve Sinner at:

Phone: 563-340-2938
Email: ssinner@mchsi.com
Website: http://advancedlathetools.com/

 


Click here to see all the New and Hot Items from 2016

Click here to see all the New and Hot Items from 2017

Click here to see all the New and Hot Items from 2018

Previous "New and Hot" items:

Great Bargains
(ends April 25, 2019)


Square Mini Ergonomic Carbide Turning Tool

On Sale for only $49.99

Save $30.00

List price: $79.99

This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Click here for more information or to purchase

 


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase

 


Rockler Four-Piece Cheese Knife Turning Kit

7/8" On Sale for only $29.99

1 1/4" On Sale for only $39.99

Save $10.00

List Price: $39.99

The cheese cutters are made from food-grade 304 stainless steel and attached to the handles which you turn. The kit includes 1/4-20 threaded inserts. The cheese cutters themselves are dishwasher safe; the handles are easily removed for this purpose.

Click here for more information or to purchase


GVS Elipse P100 Half Mask Respirator with 2 Bonus Filters, Small/Medium

For only $25.99

Save $11.99

List Price: $37.98

These Elipse P100 Half-Mask Respirators from GVS are designed to protect against dust particles, metal fumes, mists, oil and water vapors, and even some micro-organisms. Each mask includes two low-profile filters, which permit a wide field of view, and won't interfere with safety glasses and sanding shields. The filters are easily interchangeable, and replacement filters are readily available.

Click here for more information or to purchase


Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat

For only $32.74

Save $13.70

List Price: $46.44

Shell offers built-in chin protection and extended top-of-head coverage. Highly adjustable headgear tilts visor nearer or farther from face depending on preference and application. Comfortable cell foam on back of headgear. Breathable, removable, washable headband. Comfortably worn with most goggles and respirators.

Click here for more information or to purchase


4-Piece Safety Kit

For only $19.99

Save $15.00

List Price: $34.99

Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Ideal for table saw and router table use. Angled push blocks feature ultra-grippy Bench Cookie pad material. They are great for jointer and router table applications. Table featherboard assists in holding stock against the fence while sawing or routing and helps to reduce kickback. It fits standard 3/4" x 3/8" miter slots found on table saws and router tables, and features expandable miter track bars for maximum holding power.

Click here for more information or to purchase


Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Woodpeckers
From Walnut to Antlers
Robust Tools

(Click any Ad to go to our Sponsor's Website)