Most people would have to agree that magnets are pretty cool. And most of us would have owned several while growing up. But now I seem to seldom see or use them.
But there has to be a way to include magnets into our turnings. This section will explore different ways that turners can envision using magnets.
|Make Refrigerator Magnets|
By: John Wolf
In this short tutorial, John shows us how to use small pieces of beautiful wood to create something useful. Most of us have cut offs from cutting bowl blanks round or from end of pen blanks or other pieces of wood (or alternative materials) that we just don't want to discard. This is probably the best use of such small pieces.
John goes step-by-step in explaining how to make these refrigerator magnets. But be careful as they can be additive and before you know it, you whole shop will be clean!
|Fridge Magnets from Pen Blank Cuttoffs|
By: John Uteck
In this photo tutorial, John shows us a clever way of taking advantage of all those pen blank left overs that we all have. He also shows how he makes a custom screw chuck just for this project. It's very useful here and I expect for other projects too!
The fridge magnets are a just little project and not only makes use of those pen blank scraps but allows us to use magnets in our turning, cool!
New Project (usually within the last 30 days)
Project has a 3rd party fee.
(ends April 25, 2019)
Square Mini Ergonomic Carbide Turning Tool
On Sale for only $49.99
List price: $79.99
This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.
Starter Pen Turning Kit
On Sale for only $59.99
List Price: $69.99
This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.
Rockler Four-Piece Cheese Knife Turning Kit
7/8" On Sale for only $29.99
1 1/4" On Sale for only $39.99
List Price: $39.99
The cheese cutters are made from food-grade 304 stainless steel and attached to the handles which you turn. The kit includes 1/4-20 threaded inserts. The cheese cutters themselves are dishwasher safe; the handles are easily removed for this purpose.
GVS Elipse P100 Half Mask Respirator with 2 Bonus Filters, Small/Medium
For only $25.99
List Price: $37.98
These Elipse P100 Half-Mask Respirators from GVS are designed to protect against dust particles, metal fumes, mists, oil and water vapors, and even some micro-organisms. Each mask includes two low-profile filters, which permit a wide field of view, and won't interfere with safety glasses and sanding shields. The filters are easily interchangeable, and replacement filters are readily available.
Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat
For only $32.74
List Price: $46.44
Shell offers built-in chin protection and extended top-of-head coverage. Highly adjustable headgear tilts visor nearer or farther from face depending on preference and application. Comfortable cell foam on back of headgear. Breathable, removable, washable headband. Comfortably worn with most goggles and respirators.
4-Piece Safety Kit
For only $19.99
List Price: $34.99
Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Ideal for table saw and router table use. Angled push blocks feature ultra-grippy Bench Cookie pad material. They are great for jointer and router table applications. Table featherboard assists in holding stock against the fence while sawing or routing and helps to reduce kickback. It fits standard 3/4" x 3/8" miter slots found on table saws and router tables, and features expandable miter track bars for maximum holding power.
Woodturning Products of Interest
Powered by Google
Our Monthly Update
We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.
We hope you will try it out!