How do you put your coffee grounds into your coffee machine?
Well, a custom made coffee scoop is a wonderful way to start your day! These little wooden scoops are fun to make as the handle spins around the lathe. It's a fun and challenging project, take a peek!
|Elegant Coffee Scoops|
By: Mike Peace
In this tutorial, Mike shows us how he makes a two-piece coffee scoop in the style inspired by Ruth Niles. Mike shows each step along the way to turning this beautiful coffee scoop. We're really fans of the contrasting wood combinations that make this scoop stand out. You will want to have one of these in your home.
|Boutique Measuring Scoop|
By: Kurt Hertzog
In this tutorial, Kurt shows us how to make a unique, two-piece scoop. Instead of relying on a mortise and tenon joint in the thin scoop side wall, he uses a wire twisted around the body of the scoop and anchored into the handle. This is a very clever solution to the handle problem and you should check out the article to see how he did it.
|Coffee Scoop Kit|
By: Stephen Johnson
In this tutorial, Stephen uses a coffee scoop kit from Penn State Industries and shows us how he turns the wood handle for the kit. Everything is beautifully photographed so that you can follow step-by-step. After reading this tutorial, you should be ready to turn your own coffee scoop.
|Turn a 2-piece Coffee Scoop|
By: Ruth Niles
In this photo tutorial, Ruth Niles shows how she turns unique coffee scoops. They are 2 piece turnings, the main scoop body and a handle. The main body can actually be a glue-up to enable you to use multiple woods. When you do this, you can create a really nice contrasting band on the body which could then match the wood used in the handle.
This is a very attractive coffee scoop and one that most coffee makers would enjoy! I hope that you give it a try!
|Making a Coffee Scoop|
By: Phil Manzi
Phil Manzi shows his stuff turning this coffee scoop. It's a fun project and one that's great to imagine and then try. The handle spins around like a short propeller so it's a challenging project and one where knowing where your hands are at all times is critical!!
Phil's photo tutorial makes this project simple!
New Project (usually within the last 30 days)
Project has a 3rd party fee.
(ends April 25, 2019)
Square Mini Ergonomic Carbide Turning Tool
On Sale for only $49.99
List price: $79.99
This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.
Starter Pen Turning Kit
On Sale for only $59.99
List Price: $69.99
This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.
Rockler Four-Piece Cheese Knife Turning Kit
7/8" On Sale for only $29.99
1 1/4" On Sale for only $39.99
List Price: $39.99
The cheese cutters are made from food-grade 304 stainless steel and attached to the handles which you turn. The kit includes 1/4-20 threaded inserts. The cheese cutters themselves are dishwasher safe; the handles are easily removed for this purpose.
GVS Elipse P100 Half Mask Respirator with 2 Bonus Filters, Small/Medium
For only $25.99
List Price: $37.98
These Elipse P100 Half-Mask Respirators from GVS are designed to protect against dust particles, metal fumes, mists, oil and water vapors, and even some micro-organisms. Each mask includes two low-profile filters, which permit a wide field of view, and won't interfere with safety glasses and sanding shields. The filters are easily interchangeable, and replacement filters are readily available.
Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat
For only $32.74
List Price: $46.44
Shell offers built-in chin protection and extended top-of-head coverage. Highly adjustable headgear tilts visor nearer or farther from face depending on preference and application. Comfortable cell foam on back of headgear. Breathable, removable, washable headband. Comfortably worn with most goggles and respirators.
4-Piece Safety Kit
For only $19.99
List Price: $34.99
Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Ideal for table saw and router table use. Angled push blocks feature ultra-grippy Bench Cookie pad material. They are great for jointer and router table applications. Table featherboard assists in holding stock against the fence while sawing or routing and helps to reduce kickback. It fits standard 3/4" x 3/8" miter slots found on table saws and router tables, and features expandable miter track bars for maximum holding power.
Woodturning Products of Interest
Powered by Google
Our Monthly Update
We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.
We hope you will try it out!