I can't think of any time that napkins rings would not be welcome at formal occasions or even whenever you were using cloth napkins. Whether single or multiple woods, these round holders will turn out beautiful.
If you make napkin holders, be careful as you'll soon be asked for more!!
|Twisted Napkin Rings and Tea Light Holders |
By: Andy Kuby
This is a quick project with the “you TURNED that?” factor which is based upon information from Barbara Dill and others. Create a coordinated table setting with napkins rings and tea light holders turned from the same timber.
By: Al Hockenbery
In this project, you'll find Al's demonstration notes which explain how to make triangles. He explains how to use this technique to make napkin rings but shows that this technique can be used for many other types of turnings too.
Al also shows how to make 2-sided turnings.
These are very nice napkin rings and great for anyone's home.
|Turn your own Napkin Rings and Stand |
By: Paul Ross
These napkin rings and stand make an attractive table piece. They also fit nicely together for easy storage when not in use.
Depending on the look you want, you can do the entire set out of one type of wood, or use two contrasting woods. I chose to use walnut for the rings and stem, and boxwood (from France) for the stem's cap.
This is a relatively easy project requiring mostly spindle work, with some faceplate work for the base.
|Turning Napkin Rings|
By: Chas Jones
In this photo tutorial, Chas shows how to turn napkin rings including how he uses a jamb chuck to hold them while he finishes them.
New Project (usually within the last 30 days)
Project has a 3rd party fee.
(ends April 25, 2019)
Square Mini Ergonomic Carbide Turning Tool
On Sale for only $49.99
List price: $79.99
This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.
Starter Pen Turning Kit
On Sale for only $59.99
List Price: $69.99
This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.
Rockler Four-Piece Cheese Knife Turning Kit
7/8" On Sale for only $29.99
1 1/4" On Sale for only $39.99
List Price: $39.99
The cheese cutters are made from food-grade 304 stainless steel and attached to the handles which you turn. The kit includes 1/4-20 threaded inserts. The cheese cutters themselves are dishwasher safe; the handles are easily removed for this purpose.
GVS Elipse P100 Half Mask Respirator with 2 Bonus Filters, Small/Medium
For only $25.99
List Price: $37.98
These Elipse P100 Half-Mask Respirators from GVS are designed to protect against dust particles, metal fumes, mists, oil and water vapors, and even some micro-organisms. Each mask includes two low-profile filters, which permit a wide field of view, and won't interfere with safety glasses and sanding shields. The filters are easily interchangeable, and replacement filters are readily available.
Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat
For only $32.74
List Price: $46.44
Shell offers built-in chin protection and extended top-of-head coverage. Highly adjustable headgear tilts visor nearer or farther from face depending on preference and application. Comfortable cell foam on back of headgear. Breathable, removable, washable headband. Comfortably worn with most goggles and respirators.
4-Piece Safety Kit
For only $19.99
List Price: $34.99
Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Ideal for table saw and router table use. Angled push blocks feature ultra-grippy Bench Cookie pad material. They are great for jointer and router table applications. Table featherboard assists in holding stock against the fence while sawing or routing and helps to reduce kickback. It fits standard 3/4" x 3/8" miter slots found on table saws and router tables, and features expandable miter track bars for maximum holding power.
Woodturning Products of Interest
Powered by Google
Our Monthly Update
We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.
We hope you will try it out!