Rolling Pin

Rolling Pins are important kitchen tools. They are used to flatten dough for making pies. Most every kitchen has one. By turning your own, you can choose the woods and make a plain single wood or a fancy multiple wood rolling pin.

These rolling pins make wonderful gifts and also are great for new families.

 

Cherry Rolling PinCherry Rolling Pin
By: Bill Nosie
In this photo tutorial, Bill shows us how he turns a cherry rolling pin. He chose a plain style (perfectly uniform cylinder) that will work good for most types of baking.

 

Artisan Rolling PinArtisan Rolling Pin
By: Rick Campbell
In this tutorial, Rick shows us how to make a rolling pin with an offset laminated turning blank. He also shows us how to make handles that spin and wraps it up with a mounting rack.

 

Rockin' Rolling PinRockin' Rolling Pin
By: Nick Cook
In this tutorial, Nick explains how to make a rolling pin that has handles that rotate. He uses a steel rod through the center of the turning blank with handles epoxied to the steel rod. He explains everything that you need and then goes through a step-by-step explanation on how to turn them.

 

Making Laminated Rolling PinsMaking Laminated Rolling Pins
By: Joe Johnson
In this tutorial, Joe explains why to make your own rolling pin and then how. He shows examples of various types of rolling pins that you can make. If you're preparing to turn a rolling pin, this is the tutorial that you want read first.

 

Cherry Rolling PinCherry Rolling Pin
By: Bill Nosie
Bill turns a French-styled tapered rolling pin for his wife and shows us the steps along the way.

In addition, he uses a new Benjamin's Roughing Gouge and gives us a review on it too!

 

Tim's Rolling PinsTim's Rolling Pins
By: Tim Heil
In this photo tutorial, Tim shows us how he turns rolling pins on the lathe. The rolling pin uses the spinning handles which makes it a really useful kitchen accessory and a great gift for any bakers that you might know!

And just imagine what it would look like if you laminated some different colored woods together...

 

Turning a Wood Rolling PinTurning a Wood Rolling Pin
By: Larry Hancock
In this wonderful photo tutorial, Larry shows us how he makes a rolling pin with different wood for the handles. He turns the handles separate and glues them into the rolling pin body to enable the handles to spin. This creates a fantastic rolling pin where you can roll back and forth while holding the handles tightly. This is a great project and made simple by Larry's detailed descriptions and close-up photos.

 

Return to Turning Projects

Project Symbols
New Wood Turning P Project  Icon
New Project (usually within the last 30 days)
Wood Turning Video  Project
Video Project
Fee-based Wood Turning  Project
Project has a 3rd party fee.

Great Bargains
(ends April 25, 2019)


Square Mini Ergonomic Carbide Turning Tool

On Sale for only $49.99

Save $30.00

List price: $79.99

This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Click here for more information or to purchase

 


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase

 


Rockler Four-Piece Cheese Knife Turning Kit

7/8" On Sale for only $29.99

1 1/4" On Sale for only $39.99

Save $10.00

List Price: $39.99

The cheese cutters are made from food-grade 304 stainless steel and attached to the handles which you turn. The kit includes 1/4-20 threaded inserts. The cheese cutters themselves are dishwasher safe; the handles are easily removed for this purpose.

Click here for more information or to purchase


GVS Elipse P100 Half Mask Respirator with 2 Bonus Filters, Small/Medium

For only $25.99

Save $11.99

List Price: $37.98

These Elipse P100 Half-Mask Respirators from GVS are designed to protect against dust particles, metal fumes, mists, oil and water vapors, and even some micro-organisms. Each mask includes two low-profile filters, which permit a wide field of view, and won't interfere with safety glasses and sanding shields. The filters are easily interchangeable, and replacement filters are readily available.

Click here for more information or to purchase


Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat

For only $32.74

Save $13.70

List Price: $46.44

Shell offers built-in chin protection and extended top-of-head coverage. Highly adjustable headgear tilts visor nearer or farther from face depending on preference and application. Comfortable cell foam on back of headgear. Breathable, removable, washable headband. Comfortably worn with most goggles and respirators.

Click here for more information or to purchase


4-Piece Safety Kit

For only $19.99

Save $15.00

List Price: $34.99

Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Ideal for table saw and router table use. Angled push blocks feature ultra-grippy Bench Cookie pad material. They are great for jointer and router table applications. Table featherboard assists in holding stock against the fence while sawing or routing and helps to reduce kickback. It fits standard 3/4" x 3/8" miter slots found on table saws and router tables, and features expandable miter track bars for maximum holding power.

Click here for more information or to purchase


Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Robust Tools
Stainless Steel Bottle Stoppers
Arizona Carbide

(Click any Ad to go to our Sponsor's Website)