Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Segmented Projects Videos (346)

Sort by

Or click here to: Search All Videos


Walnut Segmented Vase With Chevron Feature Ring Part 1: Preparing the segments and Gluing Rings ·
By: Nathan Cumming
November 24, 2017 · 354 views

In this video I start a large segmented vase project. I designed this vase using software I purchased from Woodturnerpro.com (full link below) This software allows you to visualise what the segmented vase will look like once all the segments are cut and glued and makes the process far easier as you are able to print a cutting list for the bowl/vase you design. In this first part I use the printed summary sheet to mill the stock I have into strips the required width and thickness and then cut the individual segments. Once I have all the segments cut I glue them together into rings that will m

 

100 Segmented Vases And Bowl Series ·
By: Kyle Toth
November 16, 2017 · 13,688 views

There are a few vases in this series still available. Check out http://woodbytoth.bigcartel.com/ Finish I Used: http://amzn.to/2ylBxek Sand Paper: http://amzn.to/2ylkR6Z http://amzn.to/2AseYWV Camera Gear 80D- http://amzn.to/2zIBoW5 lense- http://amzn.to/2ip2rwj Mic- http://amzn.to/2zNcbYn GoPro- http://amzn.to/2imvjFm Other Tools I use: Buffing Wheels: http://amzn.to/2xWSCLz Chop Saw- http://amzn.to/2iZkNqG Saw Blade- http://amzn.to/2zvs0ps Lathe Tools- http://amzn.to/2xXoD6g Lathe Chuck- http://amzn.to/2zvQKx2 Drum Sander- http://amzn.to/2zaqSV9 Glue- http://amzn.to

 

Wood turning - Lets turn a segmented Goblet! (Bubinga & Ash) ·
By: CraftWithAfshin
November 04, 2017 · 6,184 views

My website: http://www.craftwithafshin.com My Patreon: https://www.patreon.com/TurnWithAfshin

 

Calm Before The Storm- My 100th Segmented Vase ·
By: Kyle Toth
November 03, 2017 · 75,753 views

Finish I use: http://amzn.to/2h026Pe Buffing Wheels: http://amzn.to/2xWSCLz Tools I use: Chop Saw- http://amzn.to/2iZkNqG Saw Blade- http://amzn.to/2zvs0ps Lathe Tools- http://amzn.to/2xXoD6g Drum Sander- http://amzn.to/2zaqSV9 Glue- http://amzn.to/2ytfS8f My 100th segmented vase is done! I started this series of 100 vases and bowls back in 2007. My neighbor let me borrow his mini lathe and said have fun, thats where it stared for me. This vase is called The Calm Before The Storm, it represents where I came from knowing nothing as a woodturner to me now as a woodturner and artist and to what

 

Schale drechseln aus Apfel und Ahorn | Projekt 73 ·
By: Andreas Achleitner
November 01, 2017 · 369 views

Ich dachte mir es liegt so schönes Apfelholz bei mir umher, sodass ich mich dazu entschloss eine Schale zu machen. Ich habe Apfel mit Ahorn kombiniert. Gefällt mir sehr gut. Was meint Ihr? Mein Name ist Andreas Achleitner und ich arbeite sehr gerne mit Holz. Wöchentlich gibt es auf meinem Kanal mindestens ein neues Video. Die Themenbereiche umfassen von der Theorie bis zur Praxis eine gute Mischung zum Thema Holzbearbeitung. Auf meinem Kanal sind diese Themen in folgenden Programmformaten gegliedert: Der Holzkurs Theorie und Praxisbeispiele aus der Welt des Holzes Drechseln-Tischlern In

 

Segmented & Celtic Knot Pens And More ·
By: Erik Anderson
October 30, 2017 · 1,244 views

A conglomerate of videos and stills of recent pens and a Pizza cutter I made recently.

 

Segmented Wood Eggs - Tornado Pattern - Part 3 - Turning the Segmented Egg on the Lathe ·
By: SIS Woodworking
October 13, 2017 · 712 views

This is part 3 of 3 videos describing the production of Segmented Wood Eggs - designed with the tornado pattern. This video-Part 3 - describes the final glue up of the segmented disc layers, turning the egg on the lathe and the final finishing of the segmented egg.

 

Segmented Wood Eggs - Tornado Pattern - Part 2 - Gluing the Segmented Ring Layers using Epoxy ·
By: SIS Woodworking
October 13, 2017 · 696 views

This is part 2 of 3 videos describing the production of Segmented Wood Eggs - designed with the tornado pattern. This video-Part 2 - describes the gluing up of the segmented disc layers using epoxy cement to produce the tornado pattern segmented discs.

 

Segmented Wood Eggs - Tornado Pattern - Part 1 - Design & Production of the Segmented Rings ·
By: SIS Woodworking
October 12, 2017 · 1,107 views

This is part 1 of 3 videos describing the production of Segmented Wood Eggs - designed with the tornado pattern. This video-Part 1 - describes the design of the segmented wood eggs, producing the segmented wedges, gluing the segmented discs and slicing the thin layers of the segmented discs which will be arranged to produce the tornado pattern.

 

A Woodturner's Dream ·
By: Malcolm Tibbetts
September 13, 2017 · 977,584 views

This video is about the making of a 2017 Burning Man art installation. It features many large scale segmenting techniques.

 

Two piece turning build ·
By: earl's small segment shop
September 07, 2017 · 895 views

segment turning made in two parts

 

Torneado segmentado "Proyectos realizados en Arte en Torno" ·
By: Arte en Torno
September 03, 2017 · 1,737 views

Con este vídeo queremos compartir con todos ustedes proyectos que hemos realizado en nuestro laboratorio y queda el desafío, hasta donde, la imaginación de cada uno de ustedes quiere llegar a crear. Esperamos que esta serie de vídeos relacionados con el torneado segmentado, un trabajo hecho por Cesar y por mi, con mucho amor y cariño nos haya permitido sembrar la semilla del segmentado en sus corazones y que cada uno haga germinar hasta recoger sus frutos. Un fuerte abrazo para todos y muchos éxitos.

 

Torneado segmentado "Torneado de la pieza" parte 6 de 6-Arte en Torno ·
By: Arte en Torno
September 03, 2017 · 1,983 views

Éste vídeo no tiene audio, queremos universalizar el conocimiento y sobrepasar las barreras idiomáticas. Cesar explica de manera práctica y sencilla, cuales son los procesos lógicos y como se tornea el proyecto que vamos a realizar.

 

Torneado segmentado "Torneado de la pieza" parte 5 de 6-Arte en Torno ·
By: Arte en Torno
September 03, 2017 · 1,463 views

Éste vídeo no tiene audio, queremos universalizar el conocimiento y sobrepasar las barreras idiomáticas. Cesar explica de manera práctica y sencilla, cuales son los procesos lógicos y como se tornea el proyecto que vamos a realizar.

 

Torneado segmentado "Torneado de la pieza" parte 4 de 6-Arte en Torno ·
By: Arte en Torno
September 03, 2017 · 1,766 views

Éste vídeo no tiene audio, queremos universalizar el conocimiento y sobrepasar las barreras idiomáticas. Cesar explica de manera práctica y sencilla, cuales son los procesos lógicos y como se tornea el proyecto que vamos a realizar.

 

Woodturning - Very Large Segmented Vase ·
By: Josh Bayer
September 03, 2017 · 8,019 views

In this video from Bayer's Sawdust Factory, I glue up a turn a large segmented vase. The finished vase measures approximately 30' tall and 19' in diameter at the widest section. Thanks for watching. Subscribe to my channel for more wood turning videos in the future.

 

Torneado segmentado "Torneado de la pieza" parte 3 de 6-Arte en Torno ·
By: Arte en Torno
August 27, 2017 · 2,209 views

Éste vídeo no tiene audio, queremos universalizar el conocimiento y sobrepasar las barreras idiomáticas. Cesar explica de manera práctica y sencilla, cuales son los procesos lógicos y como se tornea el proyecto que vamos a realizar.

 

Torneado segmentado "Torneado de la pieza" parte 2 de 6-Arte en Torno ·
By: Arte en Torno
August 27, 2017 · 1,855 views

Éste vídeo no tiene audio, queremos universalizar el conocimiento y sobrepasar las barreras idiomáticas. Cesar explica de manera práctica y sencilla, cuales son los procesos lógicos y como se tornea el proyecto que vamos a realizar.

 

Torneado segmentado "Torneado de la pieza" parte 1 de 6-Arte en Torno ·
By: Arte en Torno
August 27, 2017 · 2,386 views

Éste vídeo no tiene audio, queremos universalizar el conocimiento y sobrepasar las barreras idiomáticas. Cesar explica de manera práctica y sencilla, cuales son los procesos lógicos y como se tornea el proyecto que vamos a realizar.

 

Torneado segmentado "armado y pegado de aros" parte 1 de 1- Arte en Torno ·
By: Arte en Torno
August 26, 2017 · 2,433 views

Éste vídeo no tiene audio, queremos universalizar el conocimiento y sobrepasar las barreras idiomáticas. Víctor explica de manera práctica y sencilla, como se arman y se pegan los aros del proyecto que vamos a realizar, de manera práctica y sencilla.

 

Segment Vase drechseln "La Roma" - Teil 2 | Wood Turning a Segmented Vase | Projekt 56 ·
By: Andreas Achleitner
August 25, 2017 · 590 views

Salve Amici! Diese Woche habe ich wieder eine Segmentvase aus Amaranth und Esche gemacht. Ich habe ihr den Namen Roma gegeben weil mich die Farbe an die Purpurmäntel der Päpste bzw. an die römischen Kaiser erinnert. Da ich über 20 Arbeitstunden an der Vase gearbeitet habe kommt das Projekt in zwei Teilen. Mein Name ist Andreas Achleitner und ich arbeite sehr gerne mit Holz. Wöchentlich gibt es auf meinem Kanal mindestens ein neues Video. Die Themenbereiche umfassen von der Theorie bis zur Praxis eine gute Mischung zum Thema Holzbearbeitung. Auf meinem Kanal sind diese Themen in folgenden Pro

 

Segment Vase drechseln "La Roma" - Teil 1 | Wood Turning a Segmented Vase | Projekt 55 ·
By: Andreas Achleitner
August 25, 2017 · 555 views

Salve Amici! Diese Woche habe ich wieder eine Segmentvase aus Amaranth und Esche gemacht. Ich habe ihr den Namen Roma gegeben weil mich die Farbe an die Purpurmäntel der Päpste bzw. an die römischen Kaiser erinnert. Da ich über 20 Arbeitstunden an der Vase gearbeitet habe kommt das Projekt in zwei Teilen. Mein Name ist Andreas Achleitner und ich arbeite sehr gerne mit Holz. Wöchentlich gibt es auf meinem Kanal mindestens ein neues Video. Die Themenbereiche umfassen von der Theorie bis zur Praxis eine gute Mischung zum Thema Holzbearbeitung. Auf meinem Kanal sind diese Themen in folgenden Pro

 

Тарелка с секторами (A plate of sectors) ·
By: Аleksey Bek
August 23, 2017 · 438 views

Из брусков дуба и ясеня склеил заготовку. Обработал на токарном станке и получилась тарелка. From scraps of oak and ash, glued billet. Processed on a lathe turned bowl.

 

Segment Vase drechseln aus Esche und Nuss | Wood Turning a Segmented Vase | Projekt 54 ·
By: Andreas Achleitner
August 21, 2017 · 584 views

Salve! Heute habe ich eine Tischvase aus Esche und Nuss gemacht. Einen Eschenring habe ich mit einer Nusseinlage gemacht. Schade, dass ich keine dunklere Nuss zuhause hatte. Trotzdem ist sie sehr schön geworden. Mein Name ist Andreas Achleitner und ich arbeite sehr gerne mit Holz. Wöchentlich gibt es auf meinem Kanal mindestens ein neues Video. Die Themenbereiche umfassen von der Theorie bis zur Praxis eine gute Mischung zum Thema Holzbearbeitung. Auf meinem Kanal sind diese Themen in folgenden Programmformaten gegliedert: Der Holzkurs Theorie und Praxisbeispiele aus der Welt des Holzes

 

Segment Vase drechseln | Wood Turning a Segmented Vase | Projekt 53 ·
By: Andreas Achleitner
August 14, 2017 · 368 views

Salve! Heute habe ich mein neues Modell in die Tat umgesetzt. Die Vase ist kombiniert mit Esche, Zebrano und Amaranth. Dazu habe ich sehr viele Segmentringe verleimt ;) Mein Name ist Andreas Achleitner und ich arbeite sehr gerne mit Holz. Wöchentlich gibt es auf meinem Kanal mindestens ein neues Video. Die Themenbereiche umfassen von der Theorie bis zur Praxis eine gute Mischung zum Thema Holzbearbeitung. Auf meinem Kanal sind diese Themen in folgenden Programmformaten gegliedert: Der Holzkurs Theorie und Praxisbeispiele aus der Welt des Holzes Drechseln-Tischlern Interessante Projekte

 

Lampa av Bok | Beech Lamp | Woodturning ·
By: Elias Klingvall
July 12, 2017 · 354 views

Svarvad lampa gjord av överblivna trappsteg av Bok Gammelgarn Ängmans Snickeri Gotland Woodturned lamp made of leftover Beech stairway steps

 

Wood turning Gamelas Segmentadas ·
By: Silvio de Carvalho
June 25, 2017 · 226 views

Trabalho em tornearia segmentada, duas fruteiras em madeiras Marfim e Cedro com acabamento em verniz .

 

Segmented Hollowing with Keith Buxton ·
By: Show Me Woodturners
June 14, 2017 · 50 views

Hollowing a segmented vase with Keith's shop made hollowing rig.

 

Wood turning A star is born by Al Furtado ·
By: Rebel Turner
May 21, 2017 · 7,446 views

A star is born or in this case is imbedded In this video I show one way to add a star to a solid wood bowl and still be able to bring the base to proportion size. Thanks for watching https://www.facebook.com/TheRebelTurner

 

Wood turning Stars and rings by Al Furtado ·
By: Rebel Turner
May 17, 2017 · 6,189 views

Wood turning Stars and rings. I show how to make a star and a sure way to calculate the lengths for a segment ring of any size or any number of segments. https://www.facebook.com/TheRebelTurner https://twitter.com/AlbertFurtado57

 

Wood Turning With Naked Turner Segmented Sapele Saucer ·
By: Erik Anderson
May 14, 2017 · 1,469 views

Quick look at a little segmented saucer

 

Finishing the Foot on Tundra Flower ·
By: SegmentedTurner
May 09, 2017 · 875 views

I show step-by-step how I remove the turning from the faceplate and finish turn the foot.

 

Second Segmented Project - Episode 67 ·
By: Paul Lockwood
March 24, 2017 · 531 views

This is only the second segmented project I've made. When my wife found out what I was making she said it could be for her birthday, which is why it has not been posted until her birtday as she has not seen this. 195 pieces were cut and glued to make all the rings. 19 rings of 10 segments and 1 ring of 5 segments. The whole piece was made from pine which is seriously underated in woodturning as it has some wonderful grain. The other good thing of pine is that being a softwood the angles don't have to be quite so precise. Some electronics were also introduced with moving parts and lights to b

 

I've Waited 9 Years For This: The Knot ·
By: Kyle Toth
February 16, 2017 · 74,257 views

I made this Knot 9 years ago and finally had a base made for it. I say a lot of my pieces are my favorite but this piece truly is my favorite. I made it when I was 17 years old and I was just finding an outlet for my creativity. The Knot is made in domestic and exotic hardwoods from around the world. The base is made in metal and finished in a satin black. The piece stands 36 inches tall, 32 inches wide and 11 inches wide. If you would like to support me and help me make more videos check out https://www.patreon.com/woodbytoth I also post shop update videos of what i'm working on. All the s

 

Woodturning A Segmented Jeanie Bottle Part 2 ·
By: Colbe Pease Woodworking
February 06, 2017 · 1,951 views

In this video, I finish up the Jeanie bottle build. I finish turning it and add some finish to it.

 

Woodturning A Segmented Jeanie Bottle Part 1 ·
By: Colbe Pease Woodworking
February 01, 2017 · 2,465 views

I saw a picture of a Jeanie bottle that somebody made on the internet, and that got me wanting to make one of my own. mine is made from Oak and Figured Walnut that I had left over from the Walnut SG guitar build.

 

Wood turning - Guide on turning Square Segmented plate (Walnut/Ash) ·
By: CraftWithAfshin
January 27, 2017 · 3,902 views

Hey everyone today im turning a beautiful Walnut plate with 2 strips of Ash, I'm very pleased how it turned out and I'd love to hear what you think and if you have any suggestions please do share. I have set up Ebay shop since Im running out of space from all these turning so if your interested visit my shop and have a look, thank you all! http://www.ebay.co.uk/usr/afshincrafts Musics: http://www.bensound.com/royalty-free-music/track/acoustic-breeze http://www.bensound.com/royalty-free-music/track/memories Evening Fall Harp by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100236 Artist: http://incompetech.com/ 'Clear Air' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

Emergence of a Walnut/maple segmented vessel ·
By: phillywoodinSA
January 20, 2017 · 42 views

Here I show you how I learned to improvise a failed project to something adored by many of my friends. Most turners walk away from such project when encountering cracks like this one. As a matter of facts they discouraged me from continuing this project. I leave the rest to your judgment.

 

Segmented Wood Feature Rings - Design and Production ·
By: SIS Woodworking
January 15, 2017 · 30,444 views

Design and production of segmented wood feature rings, each with as many as 350 wood pieces. The techniques and equipment needed to produce intricate segmented wood feature rings is demonstrated. Starting with the slicing of the thin boards using the Accu-Slice band saw accessory, producing the laminated wood strips, cutting the wood segments with the table saw sled, gluing up the segment rings, and finishing the segmented wood feature rings. These feature rings will be used in future videos on the design and production of segmented wood bowls, segmented wood Pysanky Eggs, and the Christmas Tree Ornaments described in a previous video.

 

Segemented Wine Bottle ·
By: Kyle Toth
January 12, 2017 · 57,828 views

Here is a segmented wine bottle I turned on a wood lathe. The wood is Caribbean Rosewood and ebony. I modeled it after an actual bottle that I had. This is the 14th bottle that I have made over the past 6 years. It stands 12 inches tall and 3 inches round. The bottle is not meant to hold liquid, its just for decoration. This is a fairly easer woodturning project that would be a good start for any new woodturner. I found the song for this video through one of Jay Bates videos. I didn't use to film the smaller projects so let me know what you think. I will still be coming out with my larger more

 

First Segmented Work - Episode 50 ·
By: Paul Lockwood
January 08, 2017 · 1,251 views

This if my first attempt at proper segmented work. The whole project took 8 days to complete. I decided to use pine as my first attempt as I had that readily available and it's cheap if I mess the whole thing up. Lathe time was actually quite minimal. The first two days involved the initial cutting and gluing up. Day three a few minutes on the lathe before more gluing up was required. The finial finish was my mix of Shellac. Which was blonde de-waxed shellac flakes mixed with Methylated Spirits (denatured alcohol). Around 10 coats were applied to leave a really glossy finish. This was toppe

 

Segmented Walnut Vase ·
By: Stuart Nelson
January 05, 2017 · 357,674 views

16' tall 11' wide 600 pieces Top ring is made of Box Elder. Maple veneer between walnut segments. Music by my friend, Blake. Check out his SoundCloud http://SoundCloud.com/lackspoetic Check out my Instagram https://www.instagram.com/sutartmelson

 

Segmented wood bell gallery ·
By: SIS Woodworking
December 08, 2016 · 779 views

A collection of 25 segmented wood bells made by John Manura in 2016. This is a followup to a previous video demonstrating the actual process of producing these segmented wood bells. http://www.sisweb.com/wood/accu-slice.htm#3

 

Segmented Wood Turning My Slideshow ·
By: Chris Wilson
November 21, 2016 · 66 views

I created this video with the YouTube Slideshow Creator (http://www.youtube.com/upload)

 

Woodturning A Segmented Vessel Inspired By Steve Lindsley. Part 3, Finish Turning ·
By: Colbe Pease Woodworking
November 18, 2016 · 8,941 views

In this video, I finish the segmented vessel that I started a few videos together. I cut out African animals to put in the port holes on the main feature ring.

 

Segmented Double Torus: How It Was Done ·
By: Kyle Toth
November 17, 2016 · 18,168 views

This Segmented Double Torus is made in Bubinga. Its made of 2016 pieces. I turned two donut shaped rings on the lathe and then cut them in half with the table saw. The large torus has 112 segmented, with 12 pieces in each rings that are all tapered to 3.2º for a total of 1344 pieces. the smaller torus is a little less than half the size but I didn't want the size of the pieces to change so there are half as many segmented rings (56) that are all tapered to 6.4º. This makes for a total of 672 pieces in the smaller torus. In total there are 2016 pieces which represents the year that it was made.

 

Segmented Double Torus ·
By: Kyle Toth
November 10, 2016 · 627,595 views

Finish I use: http://amzn.to/2h026Pe Buffing Wheels: http://amzn.to/2xWSCLz Tools I use: Chop Saw- http://amzn.to/2iZkNqG Saw Blade- http://amzn.to/2zvs0ps Lathe Tools- http://amzn.to/2xXoD6g Thin Parting Tool- http://amzn.to/2jc4Xcd Drum Sander- http://amzn.to/2zaqSV9 Drum Sander Sand Paper- http://amzn.to/2zuUsqT Glue- http://amzn.to/2ytfS8f This Segmented Double Torus is made in Bubinga. Its made of 2016 pieces. I turned two donut shaped rings on the lathe and then cut them in half with the table saw. The large torus has 112 segmented, with 12 pieces in each rings that are all tapered to 3

 

Woodturning A Segmented Vase Inspired By Steve Lindsley. Part 2, Cutting And Assembling The Blank ·
By: Colbe Pease Woodworking
November 10, 2016 · 6,039 views

This is part 2, of a 3 part series. In this video, I cut and assemble all the ring I need to make the vessel.

 

Woodturning A Segmented Vessel Inspired By Steve Lindsley. Part 1, Feature Rings ·
By: Colbe Pease Woodworking
November 04, 2016 · 23,328 views

In this video,I start making a segmented vessel. I was inspired by Steve Lindsley, a fellow Youtube woodworker. This will be a 3 part series.

 

Baseball Bat made of 1283 Pieces!!! with Zig Zag Pattern ·
By: Fiaschetti Woodworking
October 30, 2016 · 32,858 views

This piece is available for purchase at http://www.fiaschettiwoodworking.com/ Go check out Frank Howarth's Bat: https://youtu.be/4cazESXWTic In this video I make my second baseball bat. It is made of walnut (the darkest wood) ash (the lightest wood) and yellow heart (the yellow wood). There are a total of 1283 pieces that make up this Bat. The length is 32' and the barrel size is 2 5/8'. This bat is for sale If you are interested in purchasing this piece or have any questions please email me at fiaschettiwoodworking@gmail.com

 

Segmented Chaos Vase ·
By: Kyle Toth
October 13, 2016 · 155,548 views

If you are interested in purchasing this vase check it out on my site.... http://woodbytoth.bigcartel.com This segmented vase is made of 30 different types of exotic and domestic wood. All of the rings are tapered. As you follow the rings around some will get larger and some will fade into fine points and disappear. It stands 7 inches tall and 5 inches wide. Subscribe to my channel https://www.youtube.com/channel/UCn_4... If you would like to support me and help me make more videos check out https://www.patreon.com/woodbytoth For inquiries and commissions contact woodbytoth@gmail.com

 

Wood Turning A Small Segmented Vase ·
By: Colbe Pease Woodworking
September 21, 2016 · 1,375 views

In this video, i take some Oak and Walnut strips and make them into a small segmented vase.

 

"V" Segmented Pen Blank - Epic Fail! ·
By: Lynn Lacey
September 16, 2016 · 2,501 views

In this video we will segment a pen blank in what I call the 'V' segmented blank technique. Instagram; @LL_woodworks www.LL-Woodworks.net Facebook; https://www.facebook.com/LL-Woodworks-397970183658553/ Disclaimer: My videos represent how I go about my woodworking. They are for your entertainment and not instruction. My safety is MY responsibility and YOUR safety is YOUR responsibility. Before beginning any woodworking be familiar with your equipment and always - always wear the the proper personal protective equipment. When performed safely, woodworking can be fun and rewarding. Keep it fun by working safe.

 

Segmented Miniature Vase ·
By: Kyle Toth
September 15, 2016 · 58,688 views

Subscribe to my channel https://www.youtube.com/channel/UCn_4... This is my 97th vase. It is made in Mahogany and Ebony. It stands 3 inches tall and 2 inches wide. This is part of my 100 vases and bowl series that I started back in 2007. This turning has 164 pieces of wood. This is my first miniature turning that I have done and I will be doing more! Subscribe to my channel https://www.youtube.com/channel/UCn_4... If you would like to support me and help me make more videos check out https://www.patreon.com/woodbytoth For inquiries and commissions contact woodbytoth@gmail.com To keep u

 

Segment Turning Part 3 (Foot, Finish and Port) ·
By: Maple-Crossing Woodworks
September 09, 2016 · 1,102 views

The last in this series, this video goes over turning the foot of the bowl, applying finish and cutting a port to make it a 'Yarn bowl'.

 

Segmented Pallet Bowl ·
By: Peter Matthew
August 31, 2016 · 2,138 views

I took the boards off of a pallet and made a bowl :) My website: http://www.peterturnswood.com ----------------------------------------­­---------- Music by Brock Berrigan: http://www.brockberrigan.com ----------------------------------------------------------------------------------------------- To see my vlog and follow-up channel, go to my main channel by clicking 'Peter Matthew' up above. On my main channel, look to the right side of the screen where it says 'Featured Channels'. Under 'Featured Channels' is 'Peter Matthew 2'. Click that and subscribe to that channel :) --------------------

 

Segment Turning Part 1 (Cutting and Gluing) ·
By: Maple-Crossing Woodworks
August 27, 2016 · 3,721 views

Here is the first step in a segment turning project I've been working on. After fighting with miters and blade angles, I found the 'Wedgie Sled' to be a great way to easily cut the right angle. I also used Cap'n Eddie's segment guide to determine my segment sizes. Part 2 will be the actual turning.

 

Designing & Building A Segmented Feature Ring ·
By: Gord Rock
August 16, 2016 · 10,050 views

A look at putting together a segmented feature ring for a future project. Gord's video on easier segmented rings: https://www.youtube.com/edit?o U&video_id 9dJd8LS3JV4 Jerry Bennett's channel: https://www.youtube.com/channel/UCd8Qkm6R7002yQSKu-o1Vog Making the Wedgie Sled: https://www.youtube.com/watch?v hpFNE1CHsc4 To order Wedgies: http://www.segeasy.com/toystore2.htm

 

Segmented POKEBALL ·
By: Peter Matthew
August 05, 2016 · 2,258 views

This week, I made a segmented pokeball! My website: http://www.peterturnswood.com ----------------------------------------­­---------- Music by Brock Berrigan: http://www.brockberrigan.com ----------------------------------------------------------------------------------------------- To see my vlog and follow-up channel, go to my main channel by clicking 'Peter Matthew' up above. On my main channel, look to the right side of the screen where it says 'Featured Channels'. Under 'Featured Channels' is 'Peter Matthew 2'. Click that and subscribe to that channel :) ----------------------------------------­­­­­­­­­­­­­­­­­------------------------­-­-­-­-­-­-­-­-­-­-­-­-­-­-­- Want to do a sticker swap? Send me an email: peterturnswood@gmail.com Want to send me stuff? Mailing address: Peter Matthew 6388 East Executive Drive Westland, MI 48185 Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080 Subscribe to my YouTube Channel! I post videos every Friday!

 

Wood Turning a Segmented Screw Driver ·
By: SP Wood Art
July 23, 2016 · 9,117 views

In this video, I will attempt to turn a segmented screw driver from a screw driver kit. Making your own tools are great projects, and the results are usually custom, comfortable, unique, and a good quality tool. I hope that you will enjoy this project and give it a try. If you would like see more of SP Wood Art visit us at: www.spwoodart.com Our Webpage www.facebook.com/spwoodart www.plus.google.com/ SPWoodArt1/about www.pinterest.com/spwoodart/ I strive to create handmade, high quality wood pieces (and sometimes, crafts using other mediums such as natural stone or acrylic) that connect to p

 

Woodturning Shop Leftover Day: Segmented Stacking Boxes ·
By: As Wood Turns
July 14, 2016 · 4,119 views

http://www.AsWoodTurns.com I glued up this red oak into a stave lamination some time ago when I turned a travel mug. At the time, I thought I'd be making another but then changed my mind. Since then this lamination has been in my shop, was part of moving to Utah, and is in the way. It is much like food left over from a sumptuous meal that is still in the refrigerator. But it's time to clean it out and enjoy it. Instead of another travel mug, I turned it into a set of stacking boxes finished with walnut oil. The set stands about nine inches tall and about 4 inches in diameter. Each box above t

 

Segmented Woodturning: My 96th Vase ·
By: Kyle Toth
July 11, 2016 · 389,452 views

Finish I use: http://amzn.to/2h026Pe Buffing Wheels: http://amzn.to/2xWSCLz Tools I use: Chop Saw- http://amzn.to/2iZkNqG Saw Blade- http://amzn.to/2zvs0ps Lathe Tools- http://amzn.to/2xXoD6g Thin Parting Tool- http://amzn.to/2jc4Xcd Drum Sander- http://amzn.to/2zaqSV9 Drum Sander Sand Paper- http://amzn.to/2zuUsqT Glue- http://amzn.to/2ytfS8f Subscribe to my channel This is the 96th Vase that I have turned in a series of 100 vases and bowls that I started back in 2007. Its made in Walnut and Ebony. 9 7.75 inches. If you are interested in this vase contact Woodbytoth@gmail.com If you would

 

Turning Fail ·
By: Turntastic Wood Designs
June 27, 2016 · 607 views

Nobody is perfect

 

2x4 segmented vase Fast and dirty edit ·
By: Rich McNatt
June 19, 2016 · 624 views

quick look at a large vase made with 2x4s

 

2x4s as a segmented vase? Can't hurt to try.. or can it? ·
By: Rich McNatt
June 16, 2016 · 2,165 views

I had a few pine 2x4s laying around and some time on my hands.. enjoy!

 

#114 Building a Segmented Vase Part 3-Turning and Finish ·
By: Stephen Ogle
May 30, 2016 · 59,928 views

Finishing up this series with turning the segmented vase and finish with Tung Oil and Paste Wax. My segmenting sled video.https://www.youtube.com/watch?v KCFgyYYjJeg&list PLGsnYf7PysCQVT7EYNfJCKXVZA8pWG0q8&index 3

 

#113 Building a Segmented Vase Part 2 ·
By: Stephen Ogle
May 29, 2016 · 102,986 views

Part 2 of this series starts by cutting and planing my stock. We then move into cutting the segments that will make up each ring in the vase and finish this video with the glue up. Enjoy!

 

The Serona Segmented Vase ·
By: Kyle Toth
May 26, 2016 · 279,244 views

Finish I use: http://amzn.to/2h026Pe Buffing Wheels: http://amzn.to/2xWSCLz Tools I use: Chop Saw- http://amzn.to/2iZkNqG Saw Blade- http://amzn.to/2zvs0ps Lathe Tools- http://amzn.to/2xXoD6g Thin Parting Tool- http://amzn.to/2jc4Xcd Drum Sander- http://amzn.to/2zaqSV9 Drum Sander Sand Paper- http://amzn.to/2zuUsqT Glue- http://amzn.to/2ytfS8f Subscribe to my channel https://www.youtube.com/channel/UCn_4fr5sKRorFuq479M7Kig?view_as subscriber This is the 95th Vase that I have turned in a series of 100 vases and bowls that I started back in 2007. If you are interested in this vase contact Wood

 

#112 Building a Segmented Vase Part 1 The Plan ·
By: Stephen Ogle
May 18, 2016 · 8,761 views

The first video in my next segmenting project. Covers designing a nine inch segmented vase and calculating our segment rings.

 

Segmented vase with a different shape ·
By: Rich McNatt
April 29, 2016 · 425 views

I make a segmented vase using Mahogany and Maple

 

Large Segmented Bowl and Platter ·
By: Bryan McMinn
April 26, 2016 · 251 views

See how to go from board to a large segmented bowl. This project features a 'lidded bowl within a bowl'

 

Turning A Small Segmented Poplar Bowl ·
By: Colbe Pease Woodworking
April 24, 2016 · 446 views

I had some scrap poplar laying around after a recent project. and i decided to turn them into a bowl. I tried to use the the green heartwood and the white sapwood together and make kind of a checkerboard pattern on the feature ring, as well on the bottom plug. you cant really see the difference in the video on the main ring, although in person it is much more visible.

 

#58 Woodturning a Staved Segmented Goblet - Big Catch Caught on Cam ·
By: M. Saban Smith Woodturning
April 12, 2016 · 4,537 views

Originally, this video was a mystery for my regular viewers, so if the beginning of the introduction doesn't make sense, this is why. This, my ever-supportive viewers chose the project...and it is (currently) a mystery to the first few who watch it...after 16th April, a proper thumbnail and description will be added....enjoy, and please Like, Share and Subscribe! Keep an eye out for the safety aspect of a text-book big woodturning catch accident... See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and

 

Ipe segmented bowl part 2 ·
By: Rebel Turner
March 29, 2016 · 6,381 views

Ipe segmented bowl part 2. On this part I show mounting it to a foot install the top rings (open Segment) and finish. I had made a special base but lost it during the sanding, I hope you still like it.

 

Ipe segmented bowl part 1 ·
By: Rebel Turner
March 27, 2016 · 2,417 views

Ipe segmented bowl part 1. I show the steps involved in making a compound segmented bowl out of Ipe. and show methods to be productive if you decide to make several without much loss glue time. Ipe is a wood of extremes: extremely dense and durable, as well as extremely difficult to work. Its incredible hardness and strength make it well suited for flooring applications, though it is referred to as “Brazilian Walnut” among flooring dealers—though it is not related to true Walnut in the Juglans genus.

 

R24 - Segmented Hollow Form - Bill Carley - 9MAR2010 ·
By: Waxhaw Woodturners
March 19, 2016 · 262 views

Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Rich Hansen.

 

woodturning - open segmented bowl (short edit) ·
By: TAGwoodworking
March 17, 2016 · 6,394 views

music by Kevin Macleod - ''Immersed'' and ''almost in F'' original video; https://www.youtube.com/watch?v YWmnFnCK68Y My facebook page https://www.facebook.com/TAG-woodwork... Etsy shop https://www.etsy.com/shop/TAGwoodworking?ref hdr_shop_menu My webshop/site https://www.tagwoodworking.com support me on patreon, https://www.patreon.com/user?u 235731...

 

Video #7 Four Segmented Insulated Coffee Travel Mugs Part 1 ·
By: AnkleBiter Woodworks
March 11, 2016 · 1,798 views

Four months in the making! This video is part 1 of a 2 part series on making segmented insulated travel mugs. I received some advice on improving my videos and am seeing how they go: shortening the video time and speaking less, so, let me know if I went too far in that direction. Comments and questions are always welcome. If you enjoy this video, please subscribe! Visit our website at: https://www.anklebiterwoodworks.com Like us on Facebook at: https://www.facebook.com/ https://www.facebook.com/anklebiterwoodworksyoutube/ Music Credits: Victory by Two Steps From Hell Infinite Legends by Two Steps From Hell Onward To Freedom by Trailerhead

 

Turning A Segmented Vase ·
By: Kyle Toth
March 10, 2016 · 23,105 views

Subscribe to my channel https://www.youtube.com/channel/UCn_4fr5sKRorFuq479M7Kig?view_as subscriber This is my 93rd vase. It is in a series of 100 vases and bowls. It is made in walnut, holly and ebony. If you interested email woodbytoth@gmail.com To keep up with my work throughout the week check out the links below. Thanks for watching! Love Tōth Also if you want to know why I love what I do check out my artist profile picture video done by Vigil Films. Its part of there Ardent Collection.... http://youtu.be/JjUzuECZN-0 Site: http://www.woodbytoth.com Facebook: https://facebook.com/woodbytoth Instagram: http://instagram.com/tothtoth Store: http://woodbytoth.bigcartel.com To support my videos and help me make more... https://www.patreon.com/woodbytoth Song: Blackmill-Love at Heart http://youtu.be/k1VlFvautrQ

 

Segmented Torus ·
By: Kyle Toth
February 26, 2016 · 1,065,380 views

Finish I use: http://amzn.to/2h026Pe Buffing Wheels: http://amzn.to/2xWSCLz Tools I use: Chop Saw- http://amzn.to/2iZkNqG Saw Blade- http://amzn.to/2zvs0ps Lathe Tools- http://amzn.to/2xXoD6g Drum Sander- http://amzn.to/2zaqSV9 Glue- http://amzn.to/2ytfS8f Subscribe to my Channel for more awesome projects. https://m.youtube.com/user/HomedepotKt This Segmented Donut is made in Bocote and ash. There are 2340 pieces. It will be on display and for sale at the Design In Wood In Del Mar California in June. If you are interested in purchasing it contact Woodbytoth@gmail.com To keep up with my work

 

Woodturning and Ebonising a Segmented Grecian Pot ·
By: M. Saban Smith Woodturning
February 23, 2016 · 2,580 views

This week, I look exclusively at the ebonising and staining process of oak in the second bowl from the segmented kit I started in last week's video. See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list! Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com Something else of interest: Read my FREE newspaper at http://www.turnersrest.com The UK & Ireland Woodt

 

A segmented pen ·
By: Woody Turner
February 18, 2016 · 5,393 views

Produced with CyberLink PowerDirector 14

 

Woodturning my First Segmented Bowl - From a Kit! ·
By: M. Saban Smith Woodturning
February 16, 2016 · 3,981 views

I've never put myself down as being a turner of segmented pieces. That is, not until my friend Leon showed me a segmented bowl kit, aimed at the beginner segmenter (and perhaps those with about as much patience for it as me). For more information and pictures of this project, read about it here: http://www.msabansmith.com/2016/02/16/the-joy-of-segs/ and keep an eye on Leon's site at http://www.wood-youbelieveit.co.uk. See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the pro

 

Torneado Segmentado de un bowl - Wood Turning Segmented Bowl ·
By: Marcelo Curti
February 16, 2016 · 1,603 views

Torneado segmentado de un bowl utilizando un torno chino BTA. El bowl tiene un diámetro de 28 cm y un alto de 12 cm.

 

Turning A Segmented Vase ·
By: Colbe Pease Woodworking
February 13, 2016 · 379 views

In this video, I take some turning blanks I purchased online, and I make a segmented vase for my mom for Valentines day. The woods I used were Bloodwood, Walnut, Maple, and Alder.

 

E27 - The Pantomime Episode and Segmented Bowl Kits ·
By: M. Saban Smith Woodturning
February 12, 2016 · 1,181 views

So this week is the week where you get to see yours truly up on stage in Pantomime at a local amateur theatre! You asked for it, so here it is! Also, take a look at the first segmented rings I've glued up from a bowl kit of nine rings. The whole process will be next week's video which will be out on Tuesday or Wednesday. The UK & Ireland Woodturning Symposium: http://www.ukiws.co.uk Keep up with my socially! Facebook: http://www.facebook.com/msabansmith Twitter: http://www.twitter.com/msabansmith Google : https://plus.google.com/ Msabansmith/ Instagram: https://instagram.com/msabansmith Small print and Disclaimer: This video is not intended to be a tutorial on how to turn wood like that shown in this video. The methods I employ may or may not be in best practice and you are responsible for your own safety and following all manufacturers guidelines etc. Please stay safe when wood turning or anything else you choose to do! Thanks.

 

Segmented Flowers ·
By: Carl Jacobson
February 12, 2016 · 12,143 views

I turned these segmented flower from Madrone, Walnut, and Spectraply. If you make this project please share, you can always share your project on my website too. I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robust dealer if you have any questions I'd

 

Ellen's Turning ·
By: Steve Lindsley
February 01, 2016 · 7,893 views

My friend and co-worker, Ellen, has decided to leave the company and see what the next phase in life has to offer. She will be missed but I wish her health and happiness in whatever it is she decides to do. I wanted to make her something special as a going away gift so I decided on the segmented turning that's featured in this video. The turning has some mahogany, bubinga, walnut, bloodwood and a few pieces of veneer to give it a little visual interest. I hope you enjoy watching the video. As always, questions and comments are always welcome. Music from the YouTube Audio Library: Intrac

 

Making a segmented bowl on the lathe - part 2 ·
By: Bryan McMinn
February 01, 2016 · 54 views

I created this video with the YouTube Video Editor (https://www.youtube.com/editor)

 

Making a segmented wood bowl on the lathe- part 1 ·
By: Bryan McMinn
February 01, 2016 · 126 views

I created this video with the YouTube Video Editor (https://www.youtube.com/editor)

 

Naked Turner Simple Segmented Poplar Plate ·
By: Erik Anderson
January 30, 2016 · 2,714 views

I turn a poplar plate and if you have the time I think you will like and learn from Cesar at https://www.youtube.com/user/victoracheagos hope you enjoy!

 

#162 Walnut box with segmented ring ·
By: Miguel Sanchez
January 25, 2016 · 1,624 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#162 Caja de nogal con anillo segmentado ·
By: Miguel Sanchez
January 25, 2016 · 8,012 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Segmented Genie Bottle ·
By: Carl Jacobson
January 22, 2016 · 25,868 views

This is my first real segmented piece! I used Walnut, Madrone, Purple Heart, and Myrtlewood. If segmenting is something you're interested in, do yourself a favor and make this sled. This is Jerry Bennett's design, and cost about 30 to build. If you try this project be sure to let me know! I would love to see some pictures. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon,

 

Segmented bowl fail by Al Furtado ·
By: Rebel Turner
January 04, 2016 · 954 views

They say 3rd time is a Charm, I put this bowl on the lathe 3 times for the grand finale.

 

#158 Sapele Vessel with segmented ring 2 ·
By: Miguel Sanchez
January 04, 2016 · 2,349 views

Grid of coefficients for segments: http://www.tornoartesano.es/files/corte-de-segmentos.jpg Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#158 Vasija de sapeli con anillo segmentado 2 ·
By: Miguel Sanchez
January 04, 2016 · 11,499 views

Tabla de corte de segmentos: http://www.tornoartesano.es/files/corte-de-segmentos.jpg Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#157 Sapele Vessel with segmented ring, 1 ·
By: Miguel Sanchez
January 04, 2016 · 1,434 views

Grid of coefficients for segments: http://www.tornoartesano.es/files/corte-de-segmentos.jpg Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#157 Vasija de sapeli con anillo segmentado 1 ·
By: Miguel Sanchez
January 04, 2016 · 14,545 views

Este video lo he dividido en 2 partes por su duracion, Espero que os guste. Tabla de corte de segmentos: http://www.tornoartesano.es/files/corte-de-segmentos.jpg Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Episode 20: USA, Segmented Bowl Kits and Festive Thanks ·
By: M. Saban Smith Woodturning
December 19, 2015 · 1,439 views

Wonderful to reach the end of 2015 on a high note! Thank you all for your support over the last 20 weeks - it has been a wonderful journey so far and more is planned for 2016. I'd like to wish you all the very best of the Festive Season and a creative and prosperous 2016. The next Turner's Journey will be on 2nd January 2016. Thank you all again. Here are some links I mentioned in the video: For Hampshire Sheen orders in the USA visit Jeff at The Walnut Log Studio at http://www.thewalnutlog.com and for Hampshire Sheen for the rest of the world visit: http://www.hampshiresheen.com I created this video with the YouTube Video Editor (https://www.youtube.com/editor)

 

Segmented Memorial For A Friend ·
By: Gord Rock
December 11, 2015 · 23,257 views

A segmented vessel turned as a tribute for the wife of a woodworking friend I lost to cancer recently. Link to Donut Chuck video: https://youtu.be/t-10dXclT_4 Link to Part 1 of 9 Part Series on turning a Segmented Vessel with a Diamond Feature Ring: https://youtu.be/l6D96f21eD0

 

Woodturning at 54a #47. Segmented Indian blanket design ·
By: Keith Barrow
December 04, 2015 · 3,259 views

My first successful attempt at this design. For a more detailed and much better video than mine,visit Gord Rock's channel. (Tell him I sent you!) Link to Gord Rock's channel; https://www.youtube.com/channel/UChd8tg-PwwvUj7vll4C9yKQ

 

Turning a Segmented Sphere (part 2) Woodturning by Sam Angelo ·
By: WYOMINGWOODTURNER
November 23, 2015 · 65,039 views

Sam Completes his segmented sphere project. This is Part 2 Part 1 was the glue-up.

 

Woodturning a Segmented Christmas Ornament #2 ·
By: Fiaschetti Woodworking
November 19, 2015 · 8,311 views

Please visit my new website http://www.fiaschettiwoodworking.com/ In this video I make a segmented Christmas ornament out of walnut, sapele, maple, and padauk. It consists of 507 pieces. The finish is 3 coats of 50/50 boiled linseed oil and poly, and 5 coats of poly and 1 with poly and mineral spirits. Thank you for watching Any questions please email me at fiaschettiwoodworking@gmail.com

 

Segmented Sphere: The Glue-up, woodturning (part 1) ·
By: WYOMINGWOODTURNER
November 18, 2015 · 9,725 views

In part 1, Sam glues up blanks for 8 inch spheres. He shows steps from milling to gluing up a 30 inch length of wood. In part 2 he will complete the assembly, design, and turn the sphere.

 

Woodturning an Ambrosia Maple with segmented ring bowl ·
By: R Humphrey
November 15, 2015 · 36,978 views

Turning a salvaged chunk of firewood into a pretty bowl

 

Woodturning Stave Segmented Pen Blank Christmas Ornament ·
By: As Wood Turns
November 05, 2015 · 10,087 views

http://www.AsWoodTurns.com This is another ornament for this year's Christmas Ornament Woodturning Challenge The ornament's body consists of eight 'exotic tropical hardwood' pen blanks cut in stave fashion with strips of padauk between each. Each pen blank was ripped at a 22.5 degree angle. The ornament's top and bottom are walnut. The ornament is finished with Myland's Friction Polish. See our challenge at https://youtu.be/KnPEz-X-T34 This year's Challenge Playlist for all ornament video submissions is at https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Prizes will

 

Segmented vase ·
By: Rich McNatt
November 05, 2015 · 5,750 views

 

Segmented Aggravation Travel Game ·
By: Gord Rock
November 03, 2015 · 3,867 views

Making a travel version of the popular game Aggravation. Thanks to Gil for the detailed drawings.

 

Frosty the snowman - Drechseln eines Schneemannes ·
By: Linden Drechsler
October 31, 2015 · 4,067 views

Herstellung eines Scheemanns Weitere Objekte auf meiner Homepage: www.linden-drechsler.de Musik: Julien Neel https://www.youtube.com/channel/UCRbIKMyRCDT-J47uJ26ehqw https://www.patreon.com/trudbol?ty h

 

Wood Turning a Bowl and Disguising Segmented Seams ·
By: SP Wood Art
October 27, 2015 · 5,077 views

In this weeks video, I turn a white oak wood bowl that was segmented. I touch on one turning technique that I sometimes use to disguise the outside or inside glue seams. If you would like see more of SP Wood Art visit us at: www.spwoodart.com www.facebook.com/spwoodart www.plus.google.com/ SPWoodArt1/about www.pinterest.com/spwoodart/ I strive to create handmade, high quality wood pieces (and sometimes, crafts using other mediums such as natural stone or acrylic) that connect to people on an emotional and functional level. Each piece is meticulously designed to look and feel like an art piec

 

Segmented Utility Bowl Using Low Tech Design Approach ·
By: As Wood Turns
October 16, 2015 · 8,131 views

http://www.AsWoodTurns.com Recently a viewer asked for the segment sizes for a lidded bowl. Normally, I'm willing to share details except that from the tone of the email, I thought that he wanted to make the project without any understanding of how to figure out segment sizes. I believe that anyone doing segmented work needs a basic understanding of how to design and calculate segment and ring sizes. Since not everyone is as comfortable with a computer as I am, I decided to take a low tech approach to designing this lidded bowl. Then anyone with or without a computer can easily figure out segm

 

Wood Turning a segmented urn #18 ·
By: Tommy Akridge Designs
October 12, 2015 · 8,530 views

Making a segmented urn to keep a memory

 

Woodturning at 54a. #37.Starting simple segmenting pt.2 ·
By: Keith Barrow
October 06, 2015 · 1,884 views

Description

 

Woodturning at 54a. #35. Starting simple segmenting pt.1 ·
By: Keith Barrow
October 04, 2015 · 1,662 views

A quick guide of the basics for starting segmenting

 

Segmented wood turning vases ·
By: Georgios Paschalias
October 03, 2015 · 121 views

jylotornow

 

Wood Turning Segmented Bowls part 2 ·
By: Wallace Currie
September 25, 2015 · 10,539 views

Here I go into detail on certain cuts and production methods to help you create these bowls more efficiently. If you missed my first video start here: https://www.youtube.com/watch?v aCZLMD3OhsQ

 

Drill Press Segmented Pen Long Version ·
By: RJBWoodTurner
September 22, 2015 · 6,585 views

Segmented Blank Made on a Drill Press The other day I had an idea. 'I wonder if I can make a segmented pen blank without a table or band saw?' This video chronicles my attempt at making that blank. I was pleasantly surprised when I finished turning it and saw the design because in my mind, I wasn't sure just how it would look when finished. Using my drill press, I think this could also be accomplished with a hand drill or a Jacobs chuck on the lathe, I created a beautiful segmented blank. I feel like I proved to myself that this technique works, I hope you feel the same way and I also hope that some of you will give this blank a try. I'd love to see your results. Regards, Bob Short version: https://youtu.be/3iU2oeXWx8c For shop stickers send a stamped self addressed envelope to: Bob Blanford P.O. Box 114 Newburgh, IN 47629-0114

 

Drill Press Segmented Pen Short Version ·
By: RJBWoodTurner
September 22, 2015 · 3,651 views

Segmented Blank Made on a Drill Press The other day I had an idea. 'I wonder if I can make a segmented pen blank without a table or band saw?' This video chronicles my attempt at making that blank. I was pleasantly surprised when I finished turning it and saw the design because in my mind, I wasn't sure just how it would look when finished. Using my drill press, I think this could also be accomplished with a hand drill or a Jacobs chuck on the lathe, I created a beautiful segmented blank. I feel like I proved to myself that this technique works, I hope you feel the same way and I also hope that some of you will give this blank a try. I'd love to see your results. Regards, Bob Long version: https://youtu.be/UHDKsce5O68 For shop stickers send a stamped self addressed envelope to: Bob Blanford P.O. Box 114 Newburgh, IN 47629-0114

 

Woodturners Journal: Turning a Segmented Mug ·
By: Woodturners Journal
September 02, 2015 · 17,719 views

Jerrod carves out a wood handle and cuts, assembles, and turns a wood mug.

 

Woodturning - Schrankfuß drechseln ·
By: Drechslerei Kummert
August 25, 2015 · 195 views

Hier sehen Sie wie ein Schrankfuß per Hand gedrechselt wird. Als Vorlage hatte ich vom Kunden ein ziemlich marodes Stück bekommen. Wenn man die Maße genau abnimmt kommt man ziemlich nah an das Original heran.

 

Woodturning - Holzkugel drechseln ·
By: Drechslerei Kummert
August 21, 2015 · 1,111 views

Kugeln drehen per Hand wie vor 100 Jahren ! Hier mal in ganz klein aber wir können auch ganz groß ! Wem s gefällt bitte Teilen, um altes Handwerk zu bewahren. http://drechslerei-kummert.de/shop-drechslerei-kummert

 

Woodturning a Segmented Fruit Bowl ·
By: Fiaschetti Woodworking
August 19, 2015 · 52,088 views

Please visit my new website http://www.fiaschettiwoodworking.com/ My Aunt and Uncle asked me to make them a fruit bowl. In my research I found that most fruit bowls are relatively shorter. This bowl is 11.5 inches in diameter and 4 inches high. The woods I used are Cherry, red marble wood, Wenge and Maple. For a food safe finish coated the bowl with mineral oil, and then buffed it with a home made cream beeswax. This is the 4th segmented bowl I have made. Instagram: justinfiaschetti Email: fiaschettiwoodworking@gmail.com

 

Woodturning a Segmented Vase ·
By: R Humphrey
August 17, 2015 · 42,484 views

About a week of work and wait, in a ten minute video. This is a sixteen ring vase, 15 rings of 16, 1 of 17, using mostly Cherry, and some Hickory. Segmented turning is a fun challenge, from planning to completion.

 

Woodturning a Segmented Purpleheart Bowl ·
By: R Humphrey
August 04, 2015 · 6,562 views

This is a segmented bowl, 69 segments total, 20, 10, 10, 10, 19 (rim to base) using Purpleheart wood, Hickory, and Maple. Purpleheart is an extremely hard wood so I had to sharpen my chisels quite frequently. Thanks for watching!

 

Kimula Segmented Vase ·
By: Kyle Toth
July 27, 2015 · 74,205 views

Subscribe to my channel https://www.youtube.com/channel/UCn_4fr5sKRorFuq479M7Kig?view_as subscriber The Kimula Vase is my 90th vase in my series of 100 vases and bowls. This vase took around 35 hours to make. It is currently still available. http://woodbytoth.bigcartel.com For questions and inquiries contact woodbytoth@gmail.com. Be sure to turn up the quality to 1080p To keep up with my work throughout the week check out the links below. Thanks for watching! Love Tōth Also if you want to know why I love what I do check out my artist profile video done by Vigil Films. Its part of there Ardent Collection.... http://youtu.be/JjUzuECZN-0 http://www.woodbytoth.com https://m.facebook.com/woodbytoth https://mobile.twitter.com/woodbytoth http://instagram.com/tothtoth Song: Horizon (instrumental) JFX http://youtu.be/TPkkMJOSZBg

 

Turning A Segmented Dizzy Bowl ·
By: Brayden Longstaffe
July 26, 2015 · 2,273 views

Fast motion wood turning.

 

Naked Turner Bangle From White Oak Segments ·
By: Erik Anderson
July 25, 2015 · 2,234 views

I turn a Bangle out of Whit Oak for a friend that wants to make it into a medical alert bracelet

 

Fluted Segmented Bowl #3 ·
By: Fiaschetti Woodworking
July 23, 2015 · 4,521 views

Please visit my new website http://www.fiaschettiwoodworking.com/ This is my 3rd segmented bowl. It is made up of 13 Curly Maple pieces and 48 Walnut pieces. The bowl is turned to a consistent thickness of 1/8th of an inch. email: fiaschettiwoodworking@gmail.com Instagram: justinfiaschetti

 

Segmented Yin Yang Platter ·
By: Carl Jacobson
July 17, 2015 · 252,885 views

I turned this classic Yin Yang design using Maple, Walnut. I segmented the Maple, and Walnut using a bandsaw. I recessed the two dots with a forsten bit, after turning then. It's 14' in diameter, and about 1 1/2' thick. If you make one of these I'd really like to see it, you can always share your project on my website. Tools and Supplies I use in my shop: ------------------------ Lathe Robust: http://www.turnrobust.com/ Easy Wood Tools: http://www.easywoodtools.com/ Thompson Lathe Tools: http://thompsonlathetools.com/ Howard beeswax: http://amzn.to/2zAv185 Band saw: http://amzn.to/2AlMUEP Sp

 

Naked Turner Segmented Fir and Sapele Bowl, Fail & Fix ·
By: Erik Anderson
July 05, 2015 · 11,221 views

Segmented bowl that requires a fix and it is made from douglas fir and sapele

 

SPSW 077 Turning Segmented Platters Pt 2 Russ Fairfield ·
By: SPSW Video Library
June 21, 2015 · 554 views

Russ Fairfield demonstrates turning a segmented platter

 

Woodturning a Segmented Oak Bowl for Warriors ·
By: R Humphrey
June 20, 2015 · 619 views

Number 11 in my Bowls for Warrior series. It is a seven ring bowl, 100% segmented with 16 pieces per ring, all Oak. This one is for The father of my friend and brother, who is a decorated veteran with two tours in Vietnam, and 26 honorable years of service. Thank you MSG E. Ray Austin (U. S. Army Ret.) For info, the rendered shoulder patch is the 1st Aviation Brigade.

 

Segmented, Scrolled and Turned Christmas Ornaments (part 3) by Dan Douthart ·
By: Gwinnett Woodworkers
June 10, 2015 · 5,370 views

This is part three of a series of videos on how to make 4 segment Christmas ornaments starting with scrolling the segments. Recorded and presented in HD. A handout is available from: http://gwinnettwoodworkers.com/images/Handouts/3D_Segmented_Scroll_Sawed_and_Turned_Ornaments.pdf Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Segmented, Scrolled and Turned Christmas Ornaments (part 4) by Dan Douthart - turning ·
By: Gwinnett Woodworkers
June 09, 2015 · 3,642 views

Part four covers several pattern types that look especially good with this technique. Dan demonstrates how he turns a prepared 4 segment scrolled ornament. A handout is available from: http://gwinnettwoodworkers.com/images/Handouts/3D_Segmented_Scroll_Sawed_and_Turned_Ornaments.pdf Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Segmented, Scrolled and Turned Christmas Ornaments (part 2) by Dan Douthart ·
By: Gwinnett Woodworkers
June 09, 2015 · 4,108 views

This is part two of a series of videos on how to make 4 segment Christmas ornaments covering how use your computer to make patterns for the 4 segment ornaments. Recorded and presented in HD. A handout is available from: http://gwinnettwoodworkers.com/images/Handouts/3D_Segmented_Scroll_Sawed_and_Turned_Ornaments.pdf Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Segmented, Scrolled and Turned Christmas Ornaments (part 1) by Dan Douthart - Intro ·
By: Gwinnett Woodworkers
June 09, 2015 · 6,158 views

This is part one of a series of videos on how to make 4 segment Christmas ornaments starting with scrolling the segments. Recorded and presented in HD. A handout is available from: http://gwinnettwoodworkers.com/images/Handouts/3D_Segmented_Scroll_Sawed_and_Turned_Ornaments.pdf Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Cocobolo Maple Gift Card Pen (Segmented Pen) ·
By: RJBWoodTurner
May 29, 2015 · 44,610 views

I had a little fun making this pen. I used Maple and Cocobolo cut offs from past pens and a used up J.C. Penny gift card. its not perfect but I learned quite a bit and the next one will be stellar. Regards, Bob

 

Segmented Bowl ·
By: Harry’s Woodcraft
May 29, 2015 · 18,522 views

This is my latest project a segmented bowl made from Beech mahogany and teak, All the wood that I use in this video has been reclaimed, I got some from a skip and some from a demolition site in Liverpool. 99% of what I make is with re claimed wood, I have made quite a few of these segmented bowls, and some friends have asked me how they are made, so I have made a Youtube video going through the process very quickly, this is not the correct way, this is just my way. thanks for looking, Harry Watts, The Little Garden Shed Workshop Mike Waldt Channel https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w Video one first YouTube video Segmented Bowl By Harry Watts The Little Garden Shed Workshop Music Wildwood Flowers Stanley Brothers Walking on the moon Paddy Kelly, Liverpool Oh, Nancy Charlie Lansborough Liverpool Please like share and follow Thank you for watching

 

Woodturning a Segmented Bowl with Leftover Wood ·
By: R Humphrey
May 26, 2015 · 1,171 views

Segmented Turning. I made this bowl with walnut, cherry, poplar, mahogany (light and red), and sycamore lumber. My first attempt at segmented turning, and I used various leftover pieces of wood from other projects, and also varied the segment counts on some rings. I learned a lot of what to do, and what not to do...and had fun doing it.

 

2 Segmented Vase ·
By: Eric Percival
May 23, 2015 · 112 views

After cutting segments to make each ring and gluing them together as half rings, sanding out the error in angle and gluing the rings together this is my process of turning the rings into a finished piece. This is my second segmented project, the first was a two ring bracelet I made for the wood whisperer sponsored contest last year and as such I am still very new to segmented work. To say the least it is time consuming as well as challenging, but at the same time there is plenty of repetition in the steps which means it is quite doable.

 

Woodturning at 54a #10. A segmented vessel ·
By: Keith Barrow
May 21, 2015 · 808 views

A segmented pot/vessel,made in 2 halves.

 

Tokar Art 23 Woodturning Mather's Day Segment Vase ·
By: Dipa Das
May 20, 2015 · 5,329 views

Beech and Walnut Together.. Special Gift for my Mom..

 

A Southwest Inspired Segmented Turning - Feature Rings ·
By: Steve Lindsley
May 09, 2015 · 68,441 views

I have 150 hours invested in making this vessel with a lot of video clips so I've broken the project into three videos. In this first video I show how I made the feature rings. The main ring is a porthole ring with applied inlaid figures. The secondary feature ring at the top is a sunrise ring. My inspiration for both came from books and articles written by Malcomb Tibbetts a segmented turner in South Lake Tahoe, CA. I thank Malcomb for the inspiration. I hope you enjoy these videos. Questions and comments are always welcome.

 

A Southwest Inspired Segmented Turning - Assembly ·
By: Steve Lindsley
May 09, 2015 · 36,332 views

This is the second of three videos needed to complete large segmented turning. I give an overview of how the segments are cut and glued into rings, installing a floating disk bottom and stacking the rings. I hope you enjoy this video. Please look for the other two videos - Feature Rings and Finish Turning - that go along with with this video. Questions and comments are always welcome.

 

A Southwest Inspired Segmented Turning - Finish Turning ·
By: Steve Lindsley
May 09, 2015 · 32,052 views

In this final video we get the vessel on the lathe for finished turning. I also talk about the finish and show pictures of the completed project. It was a big project and took a lot of effort but I'm very pleased with the final result. I hope you enjoyed watching this video and the other videos that are part of this project. Questions and comments are always welcome.

 

Woodturning at 54a #7 A segmented bowl ·
By: Keith Barrow
May 07, 2015 · 1,642 views

My first segmented bowl

 

Celtic Knot Soda Can Segmented Pen with a Cherry ·
By: RJBWoodTurner
April 24, 2015 · 33,582 views

After the Soda Can Segmented pen I made last week, I decided to attempt a more deliberate pattern. I went with a Celtic Knot design. I don't show the actual turning, the idea behind this video is to show how to make the blank. I was pleasantly surprised with the results. Regards, Bob

 

Soda Can Segmented Maple Pen ·
By: RJBWoodTurner
April 19, 2015 · 66,258 views

I decided to cut a soda can into strips and use it between segments of a Maple blank to create a very unique ink pen. I love how this pen turned and you can even see some of the cans color in areas of the blank. Regards, Bob

 

Custom Segmented Slimline Pen & Pencil Set ·
By: Alan Cann
March 23, 2015 · 348 views

The design for these pieces was provided by my friend and I made these for her upcoming wedding. African Ebony, English Holly, and Bloodwood. Finished in CA glue.

 

Open Segmented Hollow Vesel ·
By: Rebel Turner
March 21, 2015 · 27,141 views

I picked up a couple of pieces of Mahogany and decided to try to make something somewhat different and with a very different approach to the segments. This vessel evolved while I was turning it. Well I was looking and thinking it looked bottom heavy so I put it back on the lathe and turned a new base for it as you see on the thumbnail LOL

 

Woodturning A Segmented Bowl ·
By: Fiaschetti Woodworking
March 19, 2015 · 61,166 views

This piece is available for purchase at http://www.fiaschettiwoodworking.com/ This is a segmented bowl made out of Purpleheart, with a Chevron pattern made out of Maple, Walnut, and Jatoba. The bowl is 11.25 inches diameter, by 7.5 inches high. There are 130 pieces. The chevron patter is made with long grain. I started this project on January 26, 2015. This video is filmed and edited by me on my iPhone. This bowl is my second segmented turning and by far the most complicated turning I have made. It has only been 5 months sense I have started properly turning. look forward to more project films and more segmented turning. If you have any questions, suggestions, or comments please leave them in the comments and I will be sure to respond. Email: fiaschettiwoodworking@gmail.com Thanks for watching!

 

Naked Turner Oak Endgrain Segmented Stave Bowl ·
By: Erik Anderson
March 15, 2015 · 3,127 views

Here I turn a small endgrain Oak stave bowl.

 

Woodturn Segmented Hash Art From Leftovers ·
By: As Wood Turns
March 13, 2015 · 7,858 views

http://www.AsWoodTurns.com Leftover Time! I've accumulated some segment rings leftover from previous projects. Most are from my Crazy Droopy bowl that have a taper on the rings. Rather than make new rings, I'll make these into this project. The first two rings are flat and not very tall. These will make the base. The first is cherry with 12 segments; the second is oak with 24 segments. These I glued to a threaded wood faceplate. The next rings are 8 segment rings of walnut, padauk, oak and walnut. These total 69 segments including the walnut plug in the base. All of these rings have a taper. T

 

Slim vase with segment ring Wood turning by Al Furtado ·
By: Rebel Turner
March 02, 2015 · 3,262 views

Slim Melaleuca vase with segment ring I made this vase after having several attempts to get a good finish on the impossible Melaleuca wood. Really beautiful wood grain hard wood but almost impossible to get a good finish on it. this time I think I beat it. testing a new grind on my tool proved to be very effective too.

 

Making my first segmented pen from scratch. ·
By: Segmentedturning
March 01, 2015 · 4,098 views

Hello, I made this video as I made my first ever segmented pen blanks and pen. I'm sorry about the view of my derriere when I am clamping but I really had nowhere else to put the camera. Once again please feel free to use the fast forward button if my constant chat gets on your nerves. I hope you enjoy this one.

 

Woodturning Reclaimed Wood Segmented Bowl ·
By: Cory Tichenor
February 24, 2015 · 32,299 views

I turn a wood bowl made with reclaimed wood from the Pappy Van Winkle distillery. I didn't video any of the beginning of this bowl because it wasn't supposed to be a bowl. I was only making a test ring for another bowl and decided to follow through with this one. Thanks for watching!

 

#120 Cuenco Segmentado Facil 2 Easy Segmented Bowl 2 ·
By: Miguel Sanchez
February 23, 2015 · 15,026 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Ahi teneis la segunda parte, con un poco de Jazz de fondo para amenizar el video, espero que os guste. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#119 Cuenco Segmentado Facil 1- Easy Segmented Bowl 1 ·
By: Miguel Sanchez
February 23, 2015 · 22,324 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Agradecimiento a Denis Montville por mostrar la tecnica que os traigo hoy, espero que os guste. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Le PicBois #4 - Segmented Fountain Pen ·
By: Le PicBois
February 18, 2015 · 4,102 views

[ How to make a segmented fountain pen ] Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois ________________________________________________________ Special Thanks: Easy Wood Tools: https://www.youtube.com/user/EasyWoodTools Carl Jacobson: https://www.youtube.com/user/haydenHD ________________________________________________________ I work for free and I pay my director with cookies… Please help me to buy some flour by clicking on the link below: https://www.paypal.com/us/cgi-bin/webscr?cmd _flow&SESSION Eqxer72hzstD4emcu5OgZQyXm9I2ypT2k-PiYKNyeyKlNpjGC7vCQoHglh8&dispatch 5885d80a13c0db1f8e263663d3faee8d96f000117187ac9edec8a65b311f447e

 

Segmented Granadillo & Hackberry Bowl, Cuenco Segmentado Granadillo y Almez ·
By: Daniel Vilarino
February 13, 2015 · 5,162 views

Hi! / *Hola!* This video is dedicated to my son, Martin! ***Este video está dedicado a mi hijo, Martín!*** In this video I make a segmented bowl. The base is spalted hackberry and the top is a segmentation of 8 pieces of granadillo. ***En este video, hago un cuenco segmentado. La base es Almez Americano espaltado (pasmado) y la parte superior un segmentado de 8 piezas de granadillo.*** I use the Beall Buffing System for the finish, with a polishing with Tripoli, White Diamond and a finish of Carnauba Wax. ***Para la terminación, uso el sistema Beall de pulido, con Trípoli, Diamante Blanco

 

Le PicBois #3 - Segmented Bottle Stopper ·
By: Le PicBois
February 13, 2015 · 4,935 views

[ How to make a bottle stopper on the lathe ] Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois ________________________________________________________ Special Thanks: Easy Wood Tools: https://www.youtube.com/user/EasyWoodTools Carl Jacobson: https://www.youtube.com/user/haydenHD ________________________________________________________ I work for free and I pay my director with cookies… Please help me to buy some flour by clicking on the link below: https://www.paypal.com/us/cgi-bin/webscr?cmd _flow&SESSION Eqxer72hzstD4emcu5OgZQyXm9I2ypT2k-PiYKNyeyKlNpjGC7vCQoHglh8&dispatch 5885d80a13c0db1f8e263663d3faee8d96f000117187ac9edec8a65b311f447e

 

Woodturning Segmented Ring Jewlery Dish Holder ·
By: Cory Tichenor
February 06, 2015 · 43,419 views

In this video I make a couple of segmented ring holders. These don't have to be segmented or even with a different color wood, you could make them from a solid block just make sure to leave the center for the post. For the ones with a solid piece of wood I like to put a contrasting wood in for a center post. Please like, comment and subscribe. Thanks for watching!

 

Making a Simple Segmented Pen ·
By: RJBWoodTurner
January 26, 2015 · 71,613 views

I wanted to try making some segmenting pen blanks. You can get really intricate with making custom segmented blanks and it can get pretty overwhelming when you start researching just how to make them. I decided to keep it simple and this is what I came up with. You can build on this technique and the only limit to what you can do is your imagination. Regards, Bob

 

Basic Segmented Bowl Tutorial ·
By: Theodore Simpson
January 19, 2015 · 1,037 views

Learn how to make a beautiful, simple, segmented bowl with a few basic woodworking techniques. In this particular video, I use Butternut, Aspen, and Black Walnut for to make the segments. Take your lathe working/woodworking skills to the next level and design your own segmented bowl! Watch this video to get started!

 

Woodturning - Open segmented bowl ·
By: Thomas Anton Geurts
January 07, 2015 · 257,955 views

An ''Open'' style bowl. All songs by Kevin Macleod. www.incompetech.com Etsy shop https://www.etsy.com/shop/TAGwoodworking?ref hdr_shop_menu https://www.facebook.com/pages/TAG-wo... website https://www.tagwoodworking.com My other channel: https://www.youtube.com/channel/UCRHW... support me on patreon, https://www.patreon.com/user?u 2357319&ty h

 

Segmented Maple and Olive Fruit Bowl ·
By: Ridgeway Woodcraft
January 01, 2015 · 5,744 views

A step-by-step guide to making a segmented maple fruit bowl with olive insets. Please refer to the previous video named 'how to get tight segmented joints' for additional information

 

segmented wooden bottle with glasses ·
By: viktor klasič
December 28, 2014 · 75 views

sigmentirana lesena flaša z kelihi ,iz mojega hobi programa

 

segmented wood cup ·
By: viktor klasič
December 28, 2014 · 46 views

Hobi program

 

Construyendo un jarrón #1 | Torno | Segmentados ·
By: Segmentados Romero
December 19, 2014 · 7,955 views

Construyendo un jarrón de segmentado, todos los procesos. contacto: segmentadosromero@gmail.com

 

Woodturning - Poplar Segmented Vase ·
By: Kevin Krull
December 16, 2014 · 11,373 views

For my latest video, I'll be turning a rather tall segmented vase from Poplar stock. The vase is composed of 185 pieces (23 - eight piece rings and a bottom ring plug). The turning features the use of a steady rest that I built for my previous lathe and adapted for use on my current lathe. The vase is finished with two applications of Danish oil finish and buffed with Tripoli compound and carnauba wax.

 

Woodturning a Segmented slice Mahogany & Oak Vase Boston Woodturning ·
By: Boston Woodturning
December 06, 2014 · 104 views

Woodturning a Segmented slice Mahogany & Oak Vase Boston Woodturning

 

Christmas Ornament Segmented Challange ·
By: Glen Clark
November 26, 2014 · 284 views

Segmented Christmas Ornament for the Challenge giving by Carl Jacobson and Allan Stratton. Thanks for watching. Still learning my video editing software and self directing...

 

Alex Amoruso - Stave segmented bowl making ·
By: Ocean Woodturners
November 22, 2014 · 3,219 views

Alex Amoruso demonstrates stave segmented bowl making at the Ocean Woodturners November 2014 meeting in Providence, RI. For more information visit http://www.oceanwoodturners.com

 

Wood Turning Segmented Bowls ·
By: Wallace Currie
November 22, 2014 · 152,892 views

In this video I walk you through each step in making a beautiful wood-turned segmented bowl. Part 2: https://www.youtube.com/watch?v ZBNA47zae1U

 

Segmented Christmas Ornament ( Long version) ·
By: Carl Jacobson
November 17, 2014 · 4,504 views

Segmented Christmas ornament, I turned a little segmented ornament. It's Zebra wood, Padauk, and Maple. It's 7' tall. Christmas Ornament Playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Sponsors ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolworks.com/ Crabtree Tools http://toolsbycrabtree.com/ Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking car

 

#54 Woodturning a Segmented Christmas Ornament Part 2 of 2 ·
By: Stephen Ogle
November 17, 2014 · 7,475 views

This is the exact same video as #54 except for the music over voice problem. I apologize for the problems with the previous video. I will remove it shortly. Part 1 is at: https://www.youtube.com/watch?v AUS1IRk4Ens&list UUDVVYzYJ-0Ye0kJAx8SQAEw Vince's Wooden Wonders: http://vinceswoodnwonders.com

 

Segmented Christmas Ornament ·
By: Carl Jacobson
November 14, 2014 · 11,360 views

Segmented Christmas ornament, I turned a little segmented ornament. It's Zebra wood, Padauk, and Maple. It's 7' tall. Christmas Ornament Playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Sponsors ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolworks.com/ Crabtree Tools http://toolsbycrabtree.com/ Ways you can support the show ChefwareKits https://www.chefwarekits.com/?tracking carl Etsy https://www.etsy.com/shop/Thewoodshoptv?ref hdr_shop_men

 

#53 Woodturning a Segmented Christmas Ornament Part 1 of 2 ·
By: Stephen Ogle
November 11, 2014 · 7,950 views

This is the first part of a two part series. Featuring the building and turning of my entry into the 2014 Christmas Ornament Challenge. Sponsored by Carl Jacobsen and Alan Stratton. Part 2 is at: https://www.youtube.com/watch?v 4OT19KidiFs&feature gp-n-y&google_comment_id z13tidaonxyay5mql04cdbuh4mv2w5zqqac

 

Woodturning - Segmented Pine Vase ·
By: Kevin Krull
November 05, 2014 · 11,065 views

For this video I'll be turning a simple, elegant vase from humble pine construction stakes.

 

Woodturning Segmented Coffee Mug ·
By: Cory Tichenor
November 04, 2014 · 595,997 views

I take a couple of cheap plastic travel mugs from a discount store and turn them into an awesome set of segmented wooden travel / coffee mugs. The woods used are Canary wood and Wenge and finished with Tung oil varnish. Like, Share, Comment and Please subscribe Thanks for watching!

 

Turning a 441 piece segmented bowl with Easywood tools ·
By: Fosscreations
October 18, 2014 · 183 views

 

Segmented Tool Handle (sawdust rd. woodshop) ·
By: Johnny Boudreau
October 04, 2014 · 469 views

Because there is no reason our tools should not look as good as the things they create, I bring you... 'The Segmented Tool Handle' Our Tools are the bread winners of the shop, proper care and maintenance is due, but all in all should they not get a little bit of pampering as well, why not go the extra mile, make them look nice and inviting to use. For this piece, I started with a mystery piece of wood squaring it off on the jointer and table saw. Then Proceeded to segment two pieces of mahogany in an X pattern with one cut at 22.5 deg. and the other at 45. Turning this was easy enough, I qu

 

Woodturning My First Segmented Bowl ·
By: Custom Chris
October 03, 2014 · 19,858 views

.My First Segmented Bowl Come to my Amazon Store and find all your wood turning needs in one place. Easy to find products. http://astore.amazon.com/customchris-20 If you know a item that needs to be added to the store let me know. Profit go's towards the channel to make it better. For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Woodturning A Segmented Harvest Pumpkin ·
By: As Wood Turns
October 02, 2014 · 2,211 views

http://www.AsWoodTurns.com It's harvest time - pumpkins are showing up all around in preparation for Halloween and Thanksgiving. This pumpkin is a segmented turning from Honey Locust. The wood is mostly an orange color with lighter sap wood. The sap wood has worm holes and dark stains from insects. The stem is turned and carved from walnut. The segment rings are glued up from 12 segments each. There are 12 rings for a total of 146 pieces of wood. This pumpkin is finished with Clark's Cutting Board Finish, a two part finish consisting of mineral oil, citrus oils, beeswax and carnauba wax. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Segmented Pen Virage 3 ·
By: Alan Cann
September 08, 2014 · 2,120 views

Completed pens.

 

Segmented Pen Virage 2 ·
By: Alan Cann
September 08, 2014 · 1,944 views

Segmented blank trimmed and ready for the lathe.

 

Segmented Pen Virage 1 ·
By: Alan Cann
September 08, 2014 · 2,895 views

The rough prepared pen blank for a Virage pen, in what I am calling the Lazy S design.

 

Segmented Multi Axis Bottle (sawdust rd woodshop) ·
By: Johnny Boudreau
September 01, 2014 · 463 views

A piece of what I believe to be maple with a 1/4' strip of mahogany segmented off center. The body was turned with 3 off center axis on each side. The neck of the bottle was turned on center, then a 3/8' hole was drilled on top to hold a flower for extra points with the wife. I wanted to try a segmented multi axis turning. It ended up alright, not quite the effect I had anticipated, I think If I bring the strip of mahogany closer to the side I will carve a lot more off of it, or maybe if I wrap a piece of maple with mahogany on all four side's... My brain juice is flowin', I'll have to go ba

 

Revisit Mixed Open & Closed Segment Bowl ·
By: As Wood Turns
August 28, 2014 · 2,317 views

http://www.AsWoodTurns.com A few weeks ago I made this bowl for my neighbor who had moved away. But, before I could give it to him, segments in the base separated. Likely, the wood was not a dry as I had assumed. So, to fix this problem, I made a new segment ring. I planned to leave the very center open and fill it with casting resin. I could have cut the entire old ring off but decided to inset the new ring inside the old base rim. However, creating two tenons with a shoulder between was problematic. The joint inside the bowl was too wide for my tastes. So, I opened the top portion of the joi

 

Black & Gold ·
By: Dennis Edwards
August 28, 2014 · 124,302 views

Open Segmented Bowl

 

Segmented Bowls Part 13 - Petal Ring Design and Construction ·
By: The Hands-On Woodworker
August 15, 2014 · 4,743 views

 

Woodturning Open Segment Hollow Form Vase ·
By: As Wood Turns
August 14, 2014 · 9,226 views

http://www.AsWoodTurns.com I appreciate the form of classic vases and decided to turn one using open segmentation. This vase is walnut and cherry. Maple would have contrasted more but I think the tonal shades of the cherry blend nicely with the walnut. It is about 9 inches high and about 5 inches in diameter. This vase has 17 segment rings made up of 265 segments: 7 solid rings at 12 segments; 10 open rings at 18 segments; and one center base plug. The vase is finished with sanding sealer and wipe on polyurethane. I used an 18 segment SegEasy template to position the open segments and a Stomper Pro to assist in positioning and gluing up the rings. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Woodturn A Mixed Open & Closed Segmented Bowl ·
By: As Wood Turns
July 25, 2014 · 2,959 views

http://www.AsWoodTurns.com I made this segmented oak bowl for neighbors who recently moved away. The wood came from leftovers that they had stored in their crawlspace. I wanted them to have something from the house to remember their home and the neighborhood. The bowl is oak; 7 rings: 6 closed segment rings of 12 segments each, and 1 open segment ring of 18 segments for 91 pieces including one more in the base of the bowl. The bowl is finished with walnut oil. I could not bear the thought of filling the oak pores for a smooth shiny finish. I like the feel of oak with its pores. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Bau eines Fröbel-Kranes durch die Linden-Drechsler ·
By: Linden Drechsler
July 14, 2014 · 4,523 views

Der Fröbel-Kran, ein von dem berühmten Pädagogen Friedrich Fröbel entwickeltes Instrument zur Bildung und Stärkung von Teamgeist, Koordination und Sozialkompetenz. Obgleich dieses Spiel bereits an etlichen Schulen und anderen sozialen Einrichtungen erfolgreich verwendet wird, ist der Fröbel-Kran bisher nicht im Laden erhältlich. Die Linden-Drechsler fertigen dieses Geschicklichkeitsspiel in Handarbeit. Ob für den Einsatz im Bereich Schule, Verein oder Fortbildung, als auch als Tisch-Version für Alten- und Pflegeheime oder den privaten Rahmen -- der Fröbel-Kran bietet jeder Altersgruppe die Möglichkeit, gruppendynamisches Verhalten spielerisch zu trainieren. In diesem Video wollen wir Ihnen den Produktionsablauf des Fröbel-Krans zeigen. Doch zuvor einige Detailinformationen zum praktischen Gebrauch und dem pädagogisch-didaktischen Hintergrund. http.//www.linden-drechsler.de

 

Woodturning A Crazy Droopy Segmented Bowl ·
By: As Wood Turns
July 10, 2014 · 14,106 views

http://www.AsWoodTurns.com While at the Utah Woodturning Symposium I picked up a book about Ray Allen showing his segmented work. It was inspiring and inspired this project. Normally, segment rings must have perfectly parallel faces or else the bowl looks weird. In this case, I want the bowl to look weird -- the rings are deliberately not parallel. After gluing up the rings, I sawed them on the band saw in a somewhat diagonal manner. Then proceeded to glue up the rings to make a droopy bowl before turning it. There are 112 segments plus 1 plug in the bottom. It is 8 inches in diameter and 5 inches high. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/ AsWoodTurns

 

Segmented Spinning Top (sawdust rd. woodshop) ·
By: Johnny Boudreau
June 28, 2014 · 283 views

Made my first top, turned out to be a fun quick project. I had a piece of segmented maple with mahogany left over from the bottle video, I chucked it up and found a spinning top in there... I finished it with some mineral oil and buffed it up with some leather. Spins real nice. Thanks for watching. Music by Rusty Guitard: https://www.youtube.com/channel/UCdI608okmTH4hkw3b30MBsQ/videos Check him out awesome musician

 

Segmented Pen Blank Turned ·
By: Alan Cann
June 17, 2014 · 982 views

This is part 2 of the Segmented Pen Blank showing the finished pen.

 

Segmented Pen Blank ·
By: Alan Cann
June 17, 2014 · 4,205 views

Tulipwood/Purpleheart Segmented Pen Blank

 

Making A Segmented Vessel With Diamond Feature Ring Part 8 of 9 ·
By: Gord Rock
June 15, 2014 · 9,912 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #8 of 9 Episodes.

 

Making A Segmented Vessel With Diamond Feature Ring Part 9 of 9 ·
By: Gord Rock
June 15, 2014 · 9,145 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #9 of 9 Episodes.

 

Making A Segmented Vessel With Diamond Feature Ring Part 7 of 9 ·
By: Gord Rock
June 15, 2014 · 10,121 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #7 of 9 Episodes.

 

Making A Segmented Vessel With Diamond Feature Ring Part 5 of 9 ·
By: Gord Rock
June 15, 2014 · 23,418 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #5 of 9 Episodes.

 

Making A Segmented Vessel With Diamond Feature Ring Part 6 of 9 ·
By: Gord Rock
June 15, 2014 · 13,167 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #6 of 9 Episodes.

 

Making A Segmented Vessel With Diamond Feature Ring Part 4 of 9 ·
By: Gord Rock
June 15, 2014 · 12,645 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #4 of 9 Episodes.

 

Making A Segmented Vessel With Diamond Feature Ring Part 3 of 9 ·
By: Gord Rock
June 15, 2014 · 12,588 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #3 of 9 Episodes.

 

Making A Segmented Vessel With Diamond Feature Ring Part 2 of 9 ·
By: Gord Rock
June 15, 2014 · 16,852 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #2 of 9 Episodes.

 

Making A Segmented Vessel With Diamond Feature Ring Part 1 of 9 ·
By: Gord Rock
June 15, 2014 · 29,074 views

A series of videos showing step by step how to make a Segmented Vessel With Diamond Feature Ring. This is #1 of 9 Episodes.

 

Segmented Pen ·
By: Alan Cann
June 12, 2014 · 160 views

A Tulipwood Longwood 'click pen' with Purpleheart knot

 

Hollow form vase with segmented rings ·
By: Rebel Turner
June 06, 2014 · 1,468 views

Vase from log with segment rings added to it

 

Woodturning segmented goblet? ·
By: 3earring3
June 06, 2014 · 554 views

http://earring3.pixnet.net/blog/post/139406063

 

Segmented Bowl 1 of 3 Experimental Project ·
By: Cip's Wood Chips
May 20, 2014 · 13,042 views

For a long time I have been curious about segmented bowl turning. Rather than planning I decide to just try it. It turned out better than I expected. The Walnut wood can from a discarded dresser made in 1941 in Tennessee.

 

Segmented Bowl 2 of 3 Bowl Blank Assembly ·
By: Cip's Wood Chips
May 20, 2014 · 6,841 views

In this part I show you how I glued the rings together to form a bowl blank for turning.

 

Woodturning A Segmented Solar Spring Flower ·
By: As Wood Turns
April 18, 2014 · 1,942 views

http://www.AsWoodTurns.com It has been a tough winter for many people; and spring is having a tough time getting underway. Let's help it along with a solar powered dancing flower. The flower mechanism is purchased at a local dollar store. The project is to turn a nice wood cup to hide the awful plastic. I grabbed a hunk of segmented wood from another project and went to work. The wood could have been anything and almost any orientation. Mine is 24 segments of oak finished with beeswax and mineral oil. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready.

 

Disaster Stikes Woodturning A Segmented Bowl ·
By: As Wood Turns
April 11, 2014 · 4,446 views

http://www.AsWoodTurns.com I had grand plans for this project: a shallow bowl on a pedestal -- the pedestal having a hidden chamber. But things did not go my way. One thing after another and this project turned into a salvage operation. In the end I have a 56 segment oak bowl that looks great -- until you see the off center rings. Oh well. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready.

 

Woodworking - Making a segmented box ·
By: Thomas Anton Geurts
March 21, 2014 · 569,194 views

Making a segmented box, using the same method as with the box in the intro, hope you like it, enjoy!. Etsy shop https://www.etsy.com/shop/TAGwoodworking?ref hdr_shop_menu website https://www.tagwoodworking.com https://www.facebook.com/pages/TAG-woodworking/139507322728920 Music used; https://www.youtube.com/watch?v ehNGoyMf9kU support me on patreon, https://www.patreon.com/user?u 2357319&ty h My other channel: https://www.youtube.com/channel/UCRHWBmZAmnfS2TghE79xciw

 

Segmented Woodturning - Case For Reading Glasses ·
By: As Wood Turns
March 21, 2014 · 4,767 views

http://www.AsWoodTurns.com Sometimes I need reading glasses, but they're never where I need them. Sometimes they get squashed, bent and otherwise mangled. Here's a solution - a beautiful case. Make as many as you want to have one with a pair of reading glasses anywhere you may need one. This case consists of 11 rings: 10 of maple and padauk and one of only padauk. Each maple and padauk ring has 16 segments. Add in the end plugs for a total segment count of 170 pieces. It is finished with my mix of beeswax and mineral oil. Now I can see. Enjoy! Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready.

 

Woodturning segmented eccentric goblet ·
By: 3earring3
March 16, 2014 · 393 views

我是透過「YouTube 影片編輯器」(http://www.youtube.com/editor) 建立這部影片

 

Woodturning Segmented Bowl Featuring Narrow Lip ·
By: As Wood Turns
March 14, 2014 · 4,541 views

http://www.AsWoodTurns.com I've been 'on location' for some time. A neighbor, Roger Dokken, has helped me with my shortage of woodturning equipment such as a table saw and miter saw. He has also kept me and my wife supplied with lemons, grapefruit, and oranges. Before returning home, I want to give Roger something in return. I also want to experiment with a bowl with a convex profile, opening wide at the top to welcome anything. I also wanted a contrasting lip or edge. The problem with this concept is the wood for the lip. In most segmented turning the segments are glued up in a brick lay fash

 

Turning A Segmented Potpourri Box ·
By: Steve Lindsley
March 11, 2014 · 27,548 views

In this video I show how I make a segmented potpourri box. The box is made from scrap mahogany and sepele. I used a scroll saw to produce the center section of the lid. The pattern came from a book by Judy Gale Roberts titled 'The Great Outdoors'. I resized the pattern to fit on the lid of the box. It was a fun project and made a great gift for my daughter, Amanda. Questions and comments are always welcome.

 

Naked Turner Segmented Gear Bowl ·
By: Erik Anderson
March 10, 2014 · 96,975 views

Wood turning

 

Woodturning Hollow Vessel - Segmented For Safety ·
By: As Wood Turns
February 28, 2014 · 4,870 views

http://www.AsWoodTurns.com Hollow vessels (Hollow Forms) are fascinating. How do you go about removing all that wood through that tiny hole in the top. Once you understand how, then you also begin to understand the risks involved especially for larger projects. They then require specialized tools such as bent scrapers. Even then a high skill level is required to avoid serious catches that could destroy the project. A catch could also do physical damage to the woodturner's elbow or shoulder. I also like segmented vessels, they have a different look and appeal. So why not combine segmented and h

 

Wood Turning With Naked Turner%2C Segmented Nut Bowl ·
By: Erik Anderson
January 26, 2014 · 702 views

Segmented Nut Bowl

 

Woodturning Segmented Candy Bowl With Lid ·
By: As Wood Turns
January 24, 2014 · 14,249 views

http://www.AsWoodTurns.com With Valentine's day approaching, I made a segmented candy jar. This jar is cherry with accents in walnut. It uses 66 pieces of wood including the top and bottom finials. Since I want it to hold candy, it is finished with food safe mineral oil and beeswax. A bonus, I get to enjoy a chocolate kiss. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready.

 

Woodturning A Segmented Beveled Mirror Holder ·
By: As Wood Turns
January 17, 2014 · 3,943 views

http://www.AsWoodTurns.com A viewer, Johnny, asked me to demonstrate how to incorporate a beveled mirror into a woodturning project. This segmented turning accepts a 4 inch mirror beveled or non-beveled. It has 16 segments and a faceted faux jewel at the center. The wood is cherry finished with shellac friction polish. This is only one of many possible designs: solid or segmented wood; handled or non-handled; large or small; bowl shaped or platter shaped; etc. The possibilities are endless. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready.

 

Woodturning A Segmented Christmas Bell Ornament ·
By: As Wood Turns
December 12, 2013 · 6,048 views

http://www.AsWoodTurns.com Here's my next entry to the annual Christmas Ornament Challenge that Carl Jacobson and I are sponsoring. This is a segmented Christmas Bell to sound off at the birth of the baby Jesus. Its body is made of apricot with 5 rings of 8 segments each for 40 total segments. In addition, it has a handle and a knocker made from laburnum or golden Chain. It is finished with walnut oil. Simple Challenge Rules: 1. Make an Christmas ornament. 2. Make a video of you making the ornament. 3. Upload the video to YouTube 4. Let me know the link to add your video to the playlist. 5. Enjoy your ornament consistent with the season. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. View the complete challenge playlist at http://www.youtube.com/playlist?list PL4W9FE566kZg607Dx9qIPk0P1dto5obIJ

 

Segmented Bowls Part 5 - Sanding Bowl Halves ·
By: The Hands-On Woodworker
December 04, 2013 · 2,613 views

 

Segmented Bowls Part 4 - Gluing Segments ·
By: The Hands-On Woodworker
December 04, 2013 · 3,898 views

 

Segmented Bowls Part 8 - Turning Outside Of Bowl ·
By: The Hands-On Woodworker
December 04, 2013 · 2,370 views

 

Segmented Bowls Part 6 - Gluing Bowls Halves ·
By: The Hands-On Woodworker
December 04, 2013 · 2,291 views

 

Segmented Bowls Part 7 - Milling Top and Bottom of Bowl ·
By: The Hands-On Woodworker
December 04, 2013 · 2,590 views

 

Segmented Bowls Part 14 - How to Construct 8 Point Start Medallion ·
By: The Hands-On Woodworker
December 04, 2013 · 7,788 views

 

Segmented Bowls Part 1 - Designing ·
By: The Hands-On Woodworker
December 04, 2013 · 6,332 views

 

Segmented Bowls Part 3 - Cutting Veneer Strips ·
By: The Hands-On Woodworker
December 04, 2013 · 4,072 views

 

Segmented Bowls Part 12 - Turning Inside of Bowl ·
By: The Hands-On Woodworker
December 04, 2013 · 2,908 views

 

Segmented Bowls Part 11 - Turning Base Tenon ·
By: The Hands-On Woodworker
December 04, 2013 · 2,707 views

 

Segmented Bowls Part 10 - Creating Bottom Mortise ·
By: The Hands-On Woodworker
December 04, 2013 · 2,516 views

 

Segmented Bowls Part 9 - Flattening Bowl Bottom ·
By: The Hands-On Woodworker
December 04, 2013 · 2,261 views

 

Segmented Bowls Part 2 - Cutting Bowl Staves ·
By: The Hands-On Woodworker
December 04, 2013 · 6,509 views

 

Bowl in Birch and segmented Plum ·
By: HoscraWoodturner
November 13, 2013 · 915 views

Here I'm turning a food safe segmented Bowl from a blank consisting of one piece of Birch and twelve segmentes of Plum. More about this project here: http://hoscra.blogspot.no/2013/11/080-bowl-in-birch-and-segmented-plum.html In addition to Youtube and Google , you can find and follow me on http://hoscra.blogspot.no/ and https://www.facebook.com/HoscraWoodturner

 

Segmented Maple and Acrylic Fruit Bowl ·
By: Ridgeway Woodcraft
October 31, 2013 · 17,469 views

This video shows a step by step guide on how to make a fruit bowl from maple and acrylic. The size of the bowl is Ø330mm x 100mm high, which is Ø13' x 4' high for you non-metric folk.

 

#51 Segmentados 4, Acabando el proyecto (resubido) ·
By: Miguel Sanchez
October 25, 2013 · 41,340 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Llegamos al final de nuestro proyecto. Ha sido largo pero espero que os sea de utilidad. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#50 Segmentados 3, Encolando los discos (resubido) ·
By: Miguel Sanchez
October 25, 2013 · 44,515 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Aqui os dejo el siguiente video de la serie, despues de este ya queda el final. Mi cutrecamara me fastidio parte del video, lo siento. Saludos http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#49 Segmentados 2, corte y encolado (resubido) ·
By: Miguel Sanchez
October 25, 2013 · 138,504 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Vamos con la segunda entrega de segmentados, hoy cortaremos nuestros segementos y los encolaremos formando anillos, y por ultimo los prepararemos para el encolado final antes de pasar al torno. Espero que os guste, y como siempre digo, esta es mi manera de hacerlo, ni la unica ni la mejor, pero a mi me funciona. Saludos http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#48 Segmentados 1 El proyecto (resubido) ·
By: Miguel Sanchez
October 23, 2013 · 22,124 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Hola familia, Aqui empiezo una serie de videos en los que abordaremos el torneado segmentado, Comenzaremos por elaborar nuestro proyecto... http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Woodturning A Segmented Walnut Egg Box ·
By: As Wood Turns
September 20, 2013 · 6,723 views

http://www.AsWoodTurns.com An Australian viewer asked me to make a wood egg shaped box. The main difference is the shape and no base for it to stand on. I decided to not make a typical end grain box but instead take a segmented approach. I glued up twelve rings of eight segments each into two stacks. The top rings were plugged with walnut dowels. Each stack of rings was mounted to a threaded wood faceplate. BTW that totals 98 pieces. (8 segments x 12 rings 2 plugs) I used Titebond extend glue to minimize glue humps at joints. Then instead of starting with a solid spindle, I started with the

 

Function Versus Beauty - A Segmented Object Of Art ·
By: As Wood Turns
September 13, 2013 · 3,339 views

 

Segmented Woodturning. Making a Rosewood Bandsaw Bowl ·
By: Ridgeway Woodcraft
August 31, 2013 · 198,761 views

This video shows the steps of how to make a rosewood bowl with holly and purpleheart features. This is a form of segmented woodturning and utilises a bandsaw.

 

Woodturning With Naked Turner Segmented Fruit Bowl Part 2 ·
By: Erik Anderson
July 19, 2013 · 49,327 views

woodturning

 

Woodturning With Naked Turner Segmented Fruit Bowl Part 1 ·
By: Erik Anderson
July 18, 2013 · 77,498 views

Wood Turning

 

Segmented Tea Light - More Safe Than Eccentric ·
By: As Wood Turns
May 31, 2013 · 9,638 views

http://www.AsWoodTurns.com Rather than respond to the challenge of an eccentric tea light, I choose to turn a open segmented tea light with a bonus saucer to set it on. The style of segmentation is called open segment meaning that there are gaps between the segments making up the ring. However, nearly every open segment requires a couple of closed segment rings for a top and/or bottom. Closed segment is where there are no gaps between the segments. This tea light has a base of solid walnut; 6 open segment rings of walnut each containing 18 segments; and 1 closed segment ring of maple containing 12 segments. There is a total of 121 pieces. It is finished with walnut oil. The saucer has a base of solid walnut and 1 closed segment ring of 12 segments for a total of 13 pieces. Together there are 134 pieces. The saucer is finished with walnut oil. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

Wood Turning—Segmented, Dried Flowers Vase ·
By: Guy Bradbury
May 19, 2013 · 22,424 views

Small Segmented Vase. Walnut, Oak & Beech

 

The Segmented Clock ·
By: Ron Calverley
May 12, 2013 · 2,909 views

Making a segmented clock out of Mahogany & Aspin wood to match 'The Segmented Bowl' made earler.

 

A Segmented Turning - Part 3 ·
By: Steve Lindsley
May 11, 2013 · 23,837 views

In this video I do the finish turning and put a finish on the project. I hope you enjoyed watching me make this segmented turning. Comments are always welcome.

 

A Segmented Turning - Part 1 ·
By: Steve Lindsley
May 11, 2013 · 67,118 views

In this video I build the feature ring for a segmented turning. The material is maple and bloodwood in a simple zig zag pattern. There are two additional videos where I complete and finish the turning. I hope you enjoy the video. Comments are always welcome.

 

A Segmented Turning - Part 2 ·
By: Steve Lindsley
May 11, 2013 · 29,793 views

In this video I build the bowl to go with the feature ring. The primary wood is mesquite with maple and bloodwood accents. I hope you enjoy the video. Comments are always welcome.

 

Wood Turning—Segmented Jeannie Bottle with Lid ·
By: Guy Bradbury
April 27, 2013 · 40,949 views

Segmented Jeannie Bottle with Lid. Predominately Oak and Walnut.

 

Antonio De Gaetano - Project lamp in segmented ·
By: Anto Dega Wood
April 21, 2013 · 916 views

Legno: Carpino,Mogano Curupay

 

Turn A Common Wood Stud Into A Segmented Bowl ·
By: As Wood Turns
March 29, 2013 · 12,617 views

http://www.AsWoodTurns.com Summers Woodworking issued a challenge: Make something nice from an ordinary 2x4x8 stud. For me, that means it would have to be round. But how to turn a 2x4 into something both round and nice? Hmmm. So I decided to make a large segmented bowl, using almost all of the 2x4. I'm not sure what kind of wood it is except that is is some kind of softwood. I noticed this especially when fine short grain tips of segments would break away. I wanted the base to be a pinwheel design. So the segments tips are offset somewhat. But then with the tips breaking away, I had to inlay s

 

Turning a segmented bowl --- 2x speed ·
By: HoscraWoodturner
March 15, 2013 · 350 views

This is a typical bowl turning process. To avoid boring you it's severely speeded up. This is a new edition which shows you the turning in 2x speed instead of 4x. I remembered to 'keep it short', but forgott to 'make it sensible'. Much better now, I think :) More info on this project: http://hoscra.blogspot.no/2013/03/033-segmentet-birch-and-spaltet-rowan.html Follow my on facebook: https://www.facebook.com/HoscraWoodturner and blogspot: http://hoscra.blogspot.no/ :)

 

Turning a segmented bowl --- 4x speed ·
By: HoscraWoodturner
March 14, 2013 · 326 views

This is a typical bowl turning process. To avoid boring you it's severely speeded up. (Not to much I hope.) More info on this project: http://hoscra.blogspot.no/2013/03/033-segmentet-birch-and-spaltet-rowan.html Follow my on facebook: https://www.facebook.com/HoscraWoodturner and blogspot: http://hoscra.blogspot.no/ :)

 

Wood Turning—Segmented Vessel With Lid & Finial ·
By: Guy Bradbury
February 06, 2013 · 10,110 views

A Beautiful Teak Vessel With Spalted Accent Peices and Finial.

 

48 - Open Segmented Turning - Bill Carley - 8 Jan 2013 ·
By: Waxhaw Woodturners
February 03, 2013 · 22,283 views

Bill Smith and the book: http://www.segmentedwoodturners.org/bill-bio.php Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Daniel Brinneman.

 

A Simple Segmented Bowl Part 1 ·
By: Steve Lindsley
February 03, 2013 · 20,269 views

This is a 4 video series on how I make segmented bowls. In addition to the 'how to' moments there are a few 'how not to' tidbits as well. While I enjoy making segmented bowls and vessels it's not something I do very often. If you'd like to see segmented bowls and vessels done by those that really know what they are doing please visit www.segmentedwoodturners.org. Thanks for watching my videos. Comments are always welcome. Don't forget to subscribe!

 

A Simple Segmented Bowl Part 4 ·
By: Steve Lindsley
February 03, 2013 · 5,030 views

This is a 4 video series on how I make segmented bowls. In addition to the 'how to' moments there are a few 'how not to' tidbits as well. While I enjoy making segmented bowls and vessels it's not something I do very often. If you'd like to see segmented bowls and vessels done by those that really know what they are doing please visit www.segmentedwoodturners.org. Thanks for watching my videos. Comments are always welcome. Don't forget to subscribe!

 

A Simple Segmented Bowl Part 2 ·
By: Steve Lindsley
February 03, 2013 · 8,260 views

This is a 4 video series on how I make segmented bowls. In addition to the 'how to' moments there are a few 'how not to' tidbits as well. While I enjoy making segmented bowls and vessels it's not something I do very often. If you'd like to see segmented bowls and vessels done by those that really know what they are doing please visit www.segmentedwoodturners.org. Thanks for watching my videos. Comments are always welcome. Don't forget to subscribe!

 

A Simple Segmented Bowl Part 3 ·
By: Steve Lindsley
February 03, 2013 · 6,166 views

This is a 4 video series on how I make segmented bowls. In addition to the 'how to' moments there are a few 'how not to' tidbits as well. While I enjoy making segmented bowls and vessels it's not something I do very often. If you'd like to see segmented bowls and vessels done by those that really know what they are doing please visit www.segmentedwoodturners.org. Thanks for watching my videos. Comments are always welcome. Don't forget to subscribe!

 

An Open Segmented Bowl ·
By: tnturner22
January 29, 2013 · 27,241 views

This video describes the process that I used to build this open segmented bowl. The bowl consists of 17 open segmented layers, a solid base and a solid top ring. There is a total of 308 pieces of mahogany and maple in the bowl - enjoy.

 

Making a Segmented Bowl with Dick Koch ·
By: TexasWoodturner
January 23, 2013 · 736 views

This video goes through all of the steps in making a segmented bowl (except for showing the ripping of boards on a table saw) from start to finish, including applying an easy rub-on varnish finish.

 

Easy Method of Glueing Segments into a Ring for a Segmented Vessel ·
By: TexasWoodturner
January 23, 2013 · 922 views

This video shows an easy method of gluing together the segments for a ring for a segmented bowl that doesn't require use of clamps of any type. The glue used is TiteBond Original, which has a fast tack and setup time.

 

Woodturning A Segmented Bracelet ·
By: As Wood Turns
January 19, 2013 · 41,779 views

http://www.AsWoodTurns.com Last summer, I turned some wood bracelets for my granddaughters. Afterwards, a viewer send in a question about how to turn the outside of the bracelet without flipping the workpiece over. With that in mind, I designed an expansion chuck on which to turn bracelets. With the chuck, I can now turn bracelets more easily. This bracelet is made from tiny wood segments. Three closed segment rings have 12 segments each. Two open segment rings have 24 segments each for a total of 84 segments. Since the wood is left over from a previous project, I'm not sure what the redish wood is (Not Padauk). The light colored wood is maple. I'll describe the bracelet expansion chuck and the wood faceplates/chucks in additional videos.Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

Wood turning.... What not to do! ·
By: Fosscreations
December 03, 2012 · 397 views

Segmented wood turning.

 

How to make a Segmented Maple Vase Lining Part 2 ·
By: Ridgeway Woodcraft
November 18, 2012 · 7,513 views

This movie shows step by step instructions on how I made the maple segmented lining for the purpleheart and maple vase I made in part 1 on a metalworking lathe. This is part 2 of 2. The backing tune will be available for download soon, along with many others at: www.naughtysmarties.com

 

How to make a Segmented Lined Purpleheart Vase Part 1 ·
By: Ridgeway Woodcraft
November 18, 2012 · 12,457 views

This movie shows step by step instructions on how I made a segmented vase from purpleheart and maple on a metalworking lathe. This is part 1 of 2. The backing tune will be available for download soon, along with many others at: www.naughtysmarties.com

 

Woodturning A Segmented Vase / Vessel pt.4 ·
By: Mark Hammond
November 11, 2012 · 19,095 views

Turning a wood segmented vase / vessel pt 4.

 

Arte en Torno - Las genios de Mi Bella Genio ·
By: Arte en Torno
November 04, 2012 · 1,872 views

Altura: 224 cms. Diámetro mayor: 84 cms Cantidad de segmentos: 2608 Maderas: Sapán, Nazareno, Cedro y Pino

 

Woodturning A Segmented Vase / Vessel pt. 3 ·
By: Mark Hammond
November 03, 2012 · 23,752 views

Turning a wood segmented vase pt 3. The wood is maple and rosewood.

 

Woodturning A Segmented Vase / Vessel pt. 2 ·
By: Mark Hammond
October 14, 2012 · 11,885 views

Turning a wood segmented vase pt 2. The wood is maple and rosewood.

 

Woodturning A Segmented Vase / Vessel pt. 1 ·
By: Mark Hammond
October 08, 2012 · 9,693 views

Turning a wood segmented vase pt 1. The wood is maple and rosewood. Sorry about the late start but I was a little into the project before I decided to make a video. Please subscribe to get updates on when part 2 is up.

 

A Segmented Bowl Southwest Design ·
By: tnturner22
September 09, 2012 · 52,228 views

This video shows the steps that I used to build this Southwest Design Segments Bowl.

 

Wood Turning With Naked Turner Torodial Porthole Segmented Walnut and Maple Bowl ·
By: Erik Anderson
July 24, 2012 · 4,691 views

Reposting this video because somebody could not find it anymore.

 

Turning a Segmented bowl for Beads of Courage ·
By: DentonTurners
July 18, 2012 · 3,650 views

At the June 2012 meeting of the Golden Triangle Woodturners, Dick Koch showed us how to create a segmented bowl that he makes for the Beads of Courage (http://www.beadsofcourage.org/) program. Find out more about Wood Turning in Denton, Texas at http://www.goldentrianglewoodturners.org

 

Wood Turning With Naked Turner, Segmented Lotus Blossom Must Watch Early Piece ·
By: Erik Anderson
June 13, 2012 · 1,282 views

Wood Turning

 

Wood Turning With Naked Turner, Segmented Pine Bowl ·
By: Erik Anderson
May 28, 2012 · 11,249 views

Wood Turning

 

Woodturning projects, segmented ring holder (sugar maple, fire box elder) ·
By: 207 Made
May 28, 2012 · 1,240 views

https://www.facebook.com/pages/Spencers-Wooden-Creations/112917125483794

 

Woodturning A Segmented Vase ·
By: Mark Hammond
May 17, 2012 · 107,259 views

This segmented vase starts out as two pieces. Just like turning two wood segmented bowls and joining them together.

 

Arte en Torno- Procesos constructivos Mi Bella Genio Parte 3/4 ·
By: Arte en Torno
May 15, 2012 · 45,982 views

Estamos en la construcción del cuello y del coronamiento de Mi Bella Genio mediante la técnica del torneado segmentado. Esta obra posee una altura de 224 cms, un diámeto mayor de 84 cms y un total de 2608 segmentos. Para su construcción se emplearon 4 tipos de madera: Pino, edro, Sapán y Nazareno.

 

Wood Turning With Naked Turner, Segmented Nut Bowl ·
By: Erik Anderson
May 13, 2012 · 778 views

Wood Turning

 

Arte en Torno - Proceso Constructivo Mi Bella Genio Parte 4/4 ·
By: Arte en Torno
May 09, 2012 · 947,823 views

MI Bella Genio. Altura: 224 cms. Diámetro mayor: 84 cms Cantidad de segmentos: 2608 Maderas: Sapán, Nazareno, Cedro y Pino

 

Arte en Torno - Proceso Constructivo Mi Bella Genio Parte 2/4 ·
By: Arte en Torno
April 08, 2012 · 46,113 views

Torneado del cuerpo central de 'Mi bella genio - Colección tornado' Medidas: Altura 224cm : Diámetro 84cm : Número de segmentos 2.608 Maderas: Pino, Nazareno, Sapán y Cedro.

 

A Segmented Bowl (Part 2).mp4 ·
By: tnturner22
April 06, 2012 · 51,996 views

A Segmented Bowl (Part 2) This video shows the steps I used to to build the upper half of the bowl and join the 2 halfs together. The bowl is built using Walnut & Sassafras. The feature ring design is my verson of thunderbirds.

 

Segmented WoodTurning Vase ·
By: archturn
March 29, 2012 · 1,521 views

For more info visit http://www.archturnings.com This is what happens when I have too much time on my hands (slow January 2012). I saw so many fine segmented turnings on youtube that I thought I would try one myself. It involved more work that I expected. Not sure what I will do with it.

 

A Segmented Bowl .mp4 ·
By: tnturner22
March 28, 2012 · 17,190 views

A Segmented Bowl (Part 1) This video decsribes the steps that I used to build the lower half of this segmented bowl.

 

Making a Segmented Bracelet for my Little Princess Part 3 ·
By: Lamar Sineath
March 16, 2012 · 2,824 views

Part 3 covers sanding, finishing, and discussion of mistakes, issues and questions about the process of making a segmented bracelet. This video contains royalty free music from Dynamedion and purchased from www.soundsnap.com The track used in my video is 'Children BL EVA goodbye love L1 The direct link to the music is http://www.soundsnap.com/node/56171 The link to soundsnap's TOS is http://www.soundsnap.com/tos

 

Making a Segmented Bracelet for my Little Princess Part 2 ·
By: Lamar Sineath
March 14, 2012 · 9,383 views

This is the actual woodturning part of making a segmented wooden bracelet using red oak, padauk and purple heart wood.

 

How to make segmented vases ·
By: Ridgeway Woodcraft
March 14, 2012 · 5,907 views

Step by step run through of the making of a matching pair of segmented vases. The wood is primarily yew, but there is also layers of oak, mahogany and purpleheart too. The vases each stand aroud 165mm high and are 90mm in diameter at the widest point.

 

Making a Segmented Bracelet for my Little Princess Part 1.wmv ·
By: Lamar Sineath
March 12, 2012 · 1,076 views

Watch me make my first segmented bracelet for my daughter's birthday. Gain new perspective to making segmented peices of art. I hope you enjoy it. This video contains royalty free music from Dynamedion and purchased from www.soundsnap.com The track used in my video is 'Children BL EVA goodbye love L1 The direct link to the music is http://www.soundsnap.com/node/56171 The link to soundsnap's TOS is http://www.soundsnap.com/tos

 

Woodturning Segmented dish ·
By: 3earring3
March 01, 2012 · 525 views

 

Woodturning Segmented goblet ·
By: 3earring3
March 01, 2012 · 1,424 views

 

My Movie ·
By: Wood4turning
February 25, 2012 · 1,008 views

segmented bowl

 

Woodturning Segmented goblet ·
By: 3earring3
February 25, 2012 · 966 views

 

Segmented zigzag bowl ·
By: TheWood2saw
February 24, 2012 · 638 views

Segmented zig zag bowl

 

2nd part of segmented zigzag bowl ·
By: TheWood2saw
February 24, 2012 · 196 views

Segmented turnings

 

Segmented zig zag bowl ·
By: TheWood2saw
February 24, 2012 · 840 views

Fabrication of segments

 

A Segmented Bowl (Feature Ring).mp4 ·
By: tnturner22
February 23, 2012 · 9,908 views

This video shows the steps that I used to build a feature ring for a segmented bowl. This feature ring is made using sassafras & walnut, displaying a thunderbird design.

 

Wood Turning—Small, Lidded Vessel with Segmented Accents. ·
By: Guy Bradbury
February 16, 2012 · 149,172 views

Turning a uniquely designed small vessel with a 'bottle stopper' style lid. Experimenting with several wood combinations.

 

Segmented turning ·
By: TheWood2saw
February 11, 2012 · 203 views

Segmented turning glueing rings

 

Segmented bowl turning ·
By: TheWood2saw
February 04, 2012 · 195 views

Segmented bowl turning uncle first bowl

 

Segmented Mahogany and Oak Bowl and Lid ·
By: Ridgeway Woodcraft
January 31, 2012 · 122,373 views

Segmented bowl and lid made from oak and mahogany

 

Arte en Torno - "Mi bella genio" ·
By: Arte en Torno
January 24, 2012 · 8,229 views

Esta pieza fué elaborada mediante la técnica del torneado segmentado. Hecho totalmente a mano Está fabricada con un total de 170 piezas de madera pegadas una a una, de 5 especies diferentes: Pino radiata, Nazareno, Zapán, Roble y chapilla de Roble negro. Esta pieza fué elaborada con madera maciza, NO es chapilla o Taracea. El acabado es hecho con aceite cristal y su mantenimiento se hace cada 2 meses con un lustrador para madera y un paño seco. Respetamos el medio ambiente. Precio: (VASIJA VENDIDA) COP 310.000 (Pesos Colombianos) USD 170 (Dolar Estadounidense) 133

 

A Segmented Vase With A Twist.wmv ·
By: tnturner22
January 07, 2012 · 33,082 views

This segmented vase is made with 528 segments of mahogany & maple with a solid base.

 

Open Segmented Bowl.mov ·
By: Dennis Edwards
December 17, 2011 · 16,277 views

481 piece open segmented bowl using home made jig.

 

A Segmented Vase Part 7.mp4 ·
By: tnturner22
December 16, 2011 · 6,107 views

A Segmented Vase Part 7 - This video describes how I finish the vase using tongue oil.

 

A Segmented Vase Part 6.mp4 ·
By: tnturner22
December 11, 2011 · 4,345 views

In this video I will be truning the outside of the vase and sanding in preperation for the final finish.

 

A Segmented Vase Part 5.mp4 ·
By: tnturner22
December 08, 2011 · 8,687 views

A Segmented Vase Part 5. This video describes the method that I use to turn the inside of the the vase.

 

A Segmented Vase Part 4.mp4 ·
By: tnturner22
December 02, 2011 · 4,018 views

A Segmented Vase Part 4. This video describes the methods that I use to sand the segmented rings on a drum sander and glueing the rings together to form the vase.

 

A Segmented Vase Part 3.mp4 ·
By: tnturner22
November 30, 2011 · 3,926 views

A Segmented Vase Part 3. This video describes the method that I use to glue the segments into rings. This vase contains a total of 15 rings with 24 segments in each ring for a total of 360 segments..

 

A Segmented Vase Part 2.mp4 ·
By: tnturner22
November 29, 2011 · 7,034 views

Part 2 covers cutting the segments using a table saw sled.

 

A Segmented Vase Part 1.mp4 ·
By: tnturner22
November 27, 2011 · 5,641 views

A Segmented Vase Part 1. Made with 361 pieces of mohonany. This video discusses the 'plan' and cuting the lumber to the proper dimensions.

 

Woodturning A Segmented Lamp.wmv ·
By: tnturner22
November 03, 2011 · 115,467 views

A segmented lamp made from walnut and maple. This lamp contains a solid base and top with 21 segmented rings. A total of 506 pieces.

 

Part 2 - Making a segmented bowl ·
By: SegmentedTurner
October 21, 2011 · 182,705 views

This is where I show how to use my centering technique to get perfect alignment of a segmented assembly on the lathe.

 

Part 1 - Making a segmented bowl ·
By: SegmentedTurner
October 20, 2011 · 191,489 views

This covers much of the design and initial construction of a new segmented bowl. I am currently working on it and will post the next installment soon.

 

Segmented cherry bowl inlayed paduk diamonds ·
By: TheWood2saw
October 20, 2011 · 684 views

Wood turning bowl

 

Segmented diamond inlayed bowl ·
By: TheWood2saw
October 20, 2011 · 510 views

Turning bowl

 

Measuring and Cutting a Segmented Ring ·
By: SegmentedTurner
October 09, 2011 · 80,323 views

I describe how I measure and cut the segments for a top ring for a bowl.

 

Woodturning Simple segmented Bowl ·
By: ThisWoodwork
September 27, 2011 · 172,651 views

Show how to turn a simple segemented bowl on the woodturning lathe. Great project for learning how to turn a wooden bowl using a chuck and faceplate. This bowl was made out of ash and oak. alex harris woodworker woodworking project projects www.thiswoodwork.com woodturner teenwoodworker hollowing box woodwork bowl turning easy how to howto step by step beginer form

 

Making a Turbine Design Segmented Turning - Construction ·
By: SegmentedTurner
September 15, 2011 · 9,031 views

This is part 1 of a two part video showing the construction and turning of a special design segmented bowl.

 

Don Russell Segmented Vase Preview Part Two (2).mpg ·
By: Ron Brown
April 15, 2011 · 4,825 views

Don introduces his unique methods and processes for constructing these wonderful colorful vases. This is a preview of a video presentation to be released June 2011 edited and produced by Ron Brown.

 

Don Russell Segmented Vase Preview 001.mpg ·
By: Ron Brown
April 14, 2011 · 183,732 views

Segmented Vase DVD Preview. To be released June 2011. This sneak preview features the polychromatic segmented vases made popular by Don Russell of Georgia. This is the most comprehensive work ever released featuring Don's unique approach to this fascinating and complex style of segmented turning. It will be a multi disk release including many CAD drawn diagrams, tips, tricks, hints and sources.

 

Peppermills segmented turning by A.D.G. ·
By: Anto Dega Wood
February 13, 2011 · 56,519 views

 

Woodturning segmented Vase Sheggy by A.D.G..avi ·
By: Anto Dega Wood
February 04, 2011 · 2,838 views

 

Turning a Tall Segmented Cylindrical Vessel Part 2 of 2 ·
By: KochUSA
February 01, 2011 · 3,823 views

Created on February 1, 2011 using FlipShare.

 

Turning a Tall Segmented Cylindrical Vessel Part 1 of 2 ·
By: KochUSA
February 01, 2011 · 3,884 views

Created on February 1, 2011 using FlipShare.

 

Woodturning Projects Turning A Segmented Bowl ·
By: Carl Jacobson
January 21, 2011 · 43,048 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. Turning a segmented bowl on the lathe. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Segmented Bowl Two part 2.mov ·
By: Dennis Edwards
January 15, 2011 · 86,495 views

You can see more videos at http://dennyedwards.com

 

Segmented Bowl Two part 1.mov ·
By: Dennis Edwards
January 15, 2011 · 13,925 views

You can see more videos at http://dennyedwards.com

 

Making a Segmented Bowl with Dick Koch Part 5 of 5 ·
By: KochUSA
November 02, 2010 · 4,870 views

Dick takes you through the entire process from design to finishing of a small segmented yellowheart and walnut bowl in this video with five parts. This is Part 5 of 5..

 

Making a Segmented Bowl with Dick Koch Part 4 ·
By: KochUSA
November 02, 2010 · 6,010 views

Dick takes you through the entire process from design to finishing of a small segmented yellowheart and walnut bowl in this video with five parts. This is Part 4 of 5..

 

Making a Segmented Bowl with Dick Koch Part 3 ·
By: KochUSA
November 02, 2010 · 9,553 views

Dick takes you through the entire process from design to finishing of a small segmented yellowheart and walnut bowl in this video with five parts. This is Part 3 of 5..

 

Making a Segmented Bowl with Dick Koch Part 2 ·
By: KochUSA
November 02, 2010 · 5,376 views

Dick takes you through the entire process from design to finishing of a small segmented yellowheart and walnut bowl in this video with five parts. This is Part 2 of 5..

 

Making a Segmented Bowl with Dick Koch Part 1 ·
By: KochUSA
November 01, 2010 · 10,583 views

Dick takes you through the entire process from design to finishing of a small segmented yellowheart and walnut bowl in this video with five parts. This is Part 1 of 5..

 

Segmented Bowl 2.mov ·
By: Dennis Edwards
September 06, 2010 · 94,567 views

You can see more videos at http://dennyedwards.com

 

Segmented Bowl 1.mov ·
By: Dennis Edwards
September 06, 2010 · 18,899 views

You can see more videos at http://dennyedwards.com

 

Sagging segments on a bowl - Part 2 of 2 ·
By: SegmentedTurner
September 08, 2009 · 9,138 views

I complete the sagging segments bowl and show photos of the final piece. For more information about my work please visit my web site at http://www.DWMontville.com.

 

Sagging segments on a bowl - Part 1 of 2 ·
By: SegmentedTurner
September 07, 2009 · 41,093 views

I show how I prepared a segmented bowl for carving to simulate the segments sagging. For more information about my work please visit my web site at http://www.DWMontville.com.

 

Ornament Pendant Segment 1 ·
By: Bob Hamilton
April 06, 2009 · 8,089 views

This is Segment 1 of 4 of the Pendant section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Return to Turning Videos

Great Bargains


Heavy Duty Live Center

On Sale for only $16.53

List Price: $19.95

Click here for more information or to purchase

 


Dremel Rotary Tool Kit

On Sale for only $139.00

Save $60.99 (30%)

List price: $199.99

Click here for more information or to purchase


Roller Stand

On Sale for only $23.79

Save $6.11 (20%)

List Price: $29.90

Click here for more information or to purchase

 


Easy Wood Tools - Easy Start Rougher + Finisher + Detailer

On Sale for only $159.99

List price: $206.97

These tools have the smaller 9" maple handle and are 12.5" overall.

Click here for more information or to purchase


NOVA 48232 G3 Reversible Wood Turning Chuck

On Sale for only $99.00

Save $60.99 (38%)

List price: $159.99

Click here for more information or to purchase

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Flutemaster
Teknatool
Woodturning with Tim

(Click any Ad to go to our Sponsor's Website)