Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Tool Handles Videos (49)

Sort by

Or click here to: Search All Videos


Tool Handle Length
By: Brian Havens
March 21, 2016 · 17,689 views

Long tool handles always look really cool, but are long handles necessary? or are short handles more appropriate? Is there some criteria for determining minimum tool handle length? If you have watched a few of my videos in the past, you probably noticed that some of my tool handles are quite long, while others (like the ones on my skews) are quite short. Find out how I decide how long a tool handle needs to be.

 

Making Tool Handles for Carbide Cutters
By: Peter Stewart
March 04, 2016 · 961 views

This video shows how I made tool handles for my bars and cutters that I bought. Jack Nelson: https://www.youtube.com/channel/UCGRk... Cap'n Eddie's cutters: http://www.eddiecastelin.com -------------------------------------------------- My website: www.peterturnswood.com ----------------------------------------­­- My vlog channel: https://www.youtube.com/channel/UCiST... ----------------------------------------­­--------------------------------------- If you would like a sticker, send me a stamped self addressed envelope or one of your own stickers with your address. Peter Matthew 6388 East Executive Drive Westland, MI 48185 Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080 Subscribe to my YouTube Channel! I post videos every Friday! Music: Lachaim by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...) Source: http://incompetech.com/music/royalty-... Artist: http://incompetech.com

 

How to make your own woodturning tool handle Part III
By: Jack Nelson
February 13, 2016 · 386 views

How to make your own woodturning tool handle Part III will show how to apply a color with dye, use paste wood and grain filler, and apply a high gloss lacquer finish.

 

How to make your own woodturning tool handles part II
By: Jack Nelson
February 13, 2016 · 300 views

How to make your own woodturning tool handle part II will show how to install brass inserts into the ferrule and turn the handle.

 

How to make your own woodturning tool handle Part I
By: Jack Nelson
February 13, 2016 · 503 views

Making a woodturning tool handle that allows the tools to be installed or removed as needed. Part 1 will show the components and installing the ferrule.

 

WoodTurning Tool Handle Fix
By: The Wood Whirler
January 08, 2016 · 1,120 views

Handles were hurting my hands, so I reworked them.

 

wood turning # 15 making a carbide tool handle
By: Woodslee Summercraft
November 22, 2015 · 867 views

a quick video making a handle for one of my carbide tools

 

Platter and Tool handles
By: Rich McNatt
June 26, 2015 · 313 views

 

Turning A Tool Handle With Adapter
By: Gord Rock
June 18, 2015 · 1,772 views

Turning a wooden handle to use with an adapter to fit a rectangular tang on a Cindy Drozda Signature Negative Rake Square Recess Scraper.

 

Woodturning Celtic Knot On Pigtail Barbecue Tool Handle
By: As Wood Turns
June 11, 2015 · 10,433 views

http://www.AsWoodTurns.com In this project, I'm making a handle for a barbecue turner. But not just any handle - this one has a Celtic knot. For the Celtic knot, I threw together a sliding cutting jig to ensure accuracy in the cuts that have to be just right. A Celtic knot is a series of four angled cuts with a new wood slice inserted and glued in. Meanwhile, I'm trying out a Jacobs chuck with which to hold drill bits while drilling on the lathe. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

The Blind Wood Turner - Episode 32 - Turning A New Tool Handle
By: Blind Woodturner
June 04, 2015 · 545 views

In this installment of The Blind Wood Turner, Chris gives an old screwdriver a new lease of life by turning a lovely new handle.

 

Woodturning Bowl Gouge Tool Handle
By: Cip's Wood Chips
May 28, 2015 · 4,710 views

I purchase the tip for this tool from the estate of a member of our woodturners club. The wood for the handle came from a table leg.

 

Woodturning Tool Handle in 4 mins
By: Custom Chris
May 10, 2015 · 2,760 views

Come to my Etsy Store and get a hand made Aluminum Tool Handle https://www.etsy.com/shop/CustomChrisWoodworks For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Woodturning Aluminum Tool Handle short video
By: Custom Chris
March 01, 2015 · 2,365 views

Short video for the new channel and a look at the new handles Build Video https://www.youtube.com/watch?v IiJDc9PQxsI Come to my Etsy Store and get a hand made Aluminum Tool Handle https://www.etsy.com/shop/CustomChrisWoodworks For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Machining Wood Turning Tool Handles
By: Custom Chris Off the Cuff
March 01, 2015 · 10,836 views

My 3rd tool handle made on my metal lathe Esty 1/2 tool handle https://www.etsy.com/listing/224582676/aluminum-wood-turning-tool-handle?ref shop_home_active_1 Email for tool handle Inquiry. cmwoodtools@gmail.com

 

A Handle for a Tenon Cutter
By: RickTurns
January 28, 2015 · 18,866 views

Woodturning: Turning a handle for a wrenched tenon cutter. Making a tenon cutter from a wrench is demonstrated in this video: https://www.youtube.com/watch?v BJDy3-hYf9w

 

Not so fancy tool handle.
By: Adze Woodturning
January 23, 2015 · 327 views

Woodturning a Walnut tool handle for a new bowl gouge.

 

#2 Turning a tool handle X 4
By: Yuval Lahav Woodturning
January 16, 2015 · 2,604 views

In this long long video I will show you steps of turning a tool handle, and I will be turning 4 handles for 4 new hollowing tools I just got in the mail, from 3 different types of wood, isn't it exciting??! Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ The hollowing tools shown in this video can be ordered from: http://fromthetree.co.uk/hollowing-tools.html Songs in this video are: 1. Wooden Ambulance - Hope Against Hope 2. On Tour - November Hits Hard 3. Josh Woodward - The Dreamers 4. Josh Woodward - Branches All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Turning a Tool Handle for a TURNING Tool 2 of 2
By: WYOMINGWOODTURNER
January 15, 2015 · 11,044 views

Making a Tool Handle: In part 2, Sam continues to drill the recess for his tool. He shapes the handle with a SRG and a skew chisel, sands and finishes the project with tung oil.

 

Turning a Tool Handle for a Turning Tool 1 of 2
By: WYOMINGWOODTURNER
January 15, 2015 · 18,292 views

Making a Tool Handle: In this first part--Sam Angelo shows some of his hand crafted handles and progresses to the point of drilling out the handle for the tool. The project continues in 2 of 2.

 

A New Tool Handle
By: Custom Chris
December 01, 2014 · 3,408 views

https://www.kickstarter.com/projects/2046422509/common-man-wood-turning-tools Think of the Kick Starter as a kinda as pre-ordering The side on the right of the Kick Starter is where you can give funds and the where you can see what rewards come with that funding amount. For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

How to make a Tool Handle on a Wood Lathe
By: Shawn Gano
November 25, 2014 · 21,728 views

Many quality tools these days come without a handle. This helps reduce the cost and allows you to make a handle that is customized for you; plus they are fun to make! This video demonstrates how to make your own wooden lathe tool handle.

 

Robo Hippy presents TOOL HANDLE DEMONSTRATION
By: robohippy
September 23, 2014 · 3,436 views

Reed Gray explains some of the various wood turning tool handle designs.

 

Woodturning a lathe tool handle using carbide tools
By: SJWoodworks
September 03, 2014 · 16,881 views

In which I turn a tool handle FOR a carbide tool, USING carbide tools.

 

Tool Handle Celtic Knot Inlay a la Erik Anderson
By: John Bare
June 23, 2014 · 297 views

Tool Handle Celtic Knot Inlay Inspired by Erik Anderson http://youtu.be/BdeU0K31hZI Thanks Erik

 

Tool Handle Inlaid Chevrons
By: John Bare
June 23, 2014 · 145 views

New tool handle with Ipe inlay.

 

WOODTURNERS TOOL HANDLE
By: Robbiethewoodturner
June 19, 2014 · 26,382 views

Erik Anderson https://www.youtube.com/user/KireOgerNosredna Here is my latest project a WOODTURNERS CHUCK TOOL HANDLE

 

#89 Empuà adura de aluminio - Aluminium tool handle
By: Miguel Sanchez
April 14, 2014 · 38,285 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Empuñadura para gubias en aluminio de aspecto y resultado totalmente profesional. Espero que os guste. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Make a Removable Wood Tool Handle for Woodturning Tools
By: Cindy Drozda
March 06, 2014 · 65,594 views

Using the Aluminum Handle Adapter, I show you how to make a removable wood tool handle for Woodturning Tools. The Adapter with set screws is perfect for scrapers with rectangular tangs. One handle can be used for several tools, and gouges can be reversed into the handle to protect the edge for travel. Please take a moment to visit my website, http://www.cindydrozda.com for more information about my life, Artwork, Instructional Woodturning DVDs, Signature Turning Tools, and Woodturning Supplies. Aluminum Handle Adapters are available for online ordering here: http://www.cindydrozda.com/html/Handle_Adapters.html Questions and Comments are invited. Happy turning, everyone!

 

Turning a Tool Handle for a wood turning scraper
By: Turning Round
February 27, 2014 · 1,653 views

In this video I turn a piece of ash into a nice tool handle for a scraper. Using my wood lathe I will show all the steps to turning a tool handle for use with my lathe. It is a simple process and can save you a lot of money buying only the tool tip. Or you cna easily replace the handle on an older tool and give it new life.

 

Turning Custom Tool Handles - Bob Bezanson
By: Woodturners of Southwest Missouri
October 01, 2013 · 38,293 views

Bob Bezanson of the Woodturners of SW MO demonstrates turning custom tool handles while adding a brass plumbing fixture turned down as the ferrule. He also offers several tips and tricks along with the demo. Downloadable PDF's are available on our club website with sources and further instructions. www.woodturnersofswmo.org The Woodturners of SW MO meeting in Springfield, MO the 4th Saturday each month. For more information visit our website at www.woodturnersofswmo.org

 

Hurricane Woodturning Tool Handle - The Woodturning Shop
By: The Woodturning Store
July 29, 2013 · 7,964 views

The HD video shows the Hurricane Woodturning Tool Handle. It is a modular turning tool handle system made in the USA from aircraft grade aluminum. It accepts 5/8' tools and inserts are available for 1/2', 3/8' and 1/4' tools. A rectangular insert will soon be available. Please subscribe to my channel and send me any comments or suggestions. Check out my website at: http://www.thewoodturningstore.com or http://www.woodturner.co. On my website you will find Hurricane Tools and Chucks, Projects Supplies and I am also an authorized dealer for Robust Lathes and tools

 

The Tool Handle Making Process
By: Jake Gevorgian
February 25, 2012 · 81,861 views

woodturning tool handle

 

75 tool handle.avi
By: Cap'n Eddie Castelin
April 05, 2011 · 28,240 views

A basic toolhandle, with some tips on how to prep, turn and finish.

 

Tool Handle, Drilling The Hole Revisited
By: gmertl
February 15, 2010 · 6,106 views

Trying to clarify the process I use for drilling a hole in a tool handle for mounting the tool.

 

Turning A Tool Handle, Episode 1
By: gmertl
February 08, 2010 · 23,626 views

My procedure for making a Tool Handle on the Lathe. Introduction and first steps.

 

Turning A Tool Handle, Episode 2
By: gmertl
February 08, 2010 · 15,645 views

Fitting the ferrule and starting to turn to shape.

 

Turning A Tool Handle, Episode 3
By: gmertl
February 08, 2010 · 14,449 views

Complete turning to final shape and drill the mounting hole for the tool.

 

Turning A Tool Handle, Episode 4
By: gmertl
February 08, 2010 · 13,400 views

Mounting the tool in the handle, filling the gaps and wrap up.

 

Drilling the mounting hole in a custom turning tool handle
By: SegmentedTurner
January 29, 2010 · 18,462 views

I show one way to drill the mounting hole in a turning tool handle using the lathe. This is about the easiest way to make sure the hole is centered and aligned with the handle. To see more of what I do and to learn about how you can make your own woodturning tool visit my web site at http://www.DWMontville.com.

 

Tool handle segment 5
By: Bob Hamilton
June 09, 2009 · 6,012 views

Turning a tool handle from a piece of dogwood. Apologies for forgetting to relocate the camera so much of the action is off screen in this segment.

 

Tool handle segment 4 of 5
By: Bob Hamilton
June 09, 2009 · 9,098 views

Turning a tool handle from a piece of dogwood.

 

Tool handle segment 3 of 5
By: Bob Hamilton
June 09, 2009 · 6,900 views

Turning a tool handle from a piece of dogwood.

 

Tool handle segment 2 of 5
By: Bob Hamilton
June 09, 2009 · 7,741 views

Turning a tool handle from a piece of dogwood.

 

Tool handle segment 1 of 5
By: Bob Hamilton
June 08, 2009 · 12,697 views

I needed a handle for a new 1/2' spindle gouge so I decided to run the camera while I was making it. The wood I used is dogwood.

 

Drilling tool handle hole on the lathe
By: SegmentedTurner
April 30, 2009 · 29,194 views

I show how to drill the tool body hole in your turned tool handle. Details about preparation and drilling are demonstrated. For more information about my work please visit my web site at http://www.DWMontville.com.

 

Finish on a Pyinma tool handle
By: SegmentedTurner
March 09, 2009 · 3,728 views

I let you watch as I put the first coat of finish on a curly Pyinma wood tool handle. Watching the figure 'pop' is fun. For more information about my work please visit my web site at http://www.DWMontville.com.

 

Finish on Ebony tool handle
By: SegmentedTurner
February 16, 2009 · 14,783 views

I first called this Rosewood. I now realize that it's Ebony. Enjoy it anyway. I'll be posting more interesting woods being finished in the future. For more information about my work please visit my web site at http://www.DWMontville.com.

 

Make an Aluminum Tool Handle
By: Cap'n Eddie Castelin
February 04, 2009 · 26,398 views

Make a tool handle for your hollowing turning tools, specialty tools, etc.

 

Return to Turning Videos

Great Bargains
(ends April 25, 2019)


Square Mini Ergonomic Carbide Turning Tool

On Sale for only $49.99

Save $30.00

List price: $79.99

This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Click here for more information or to purchase

 


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase

 


Rockler Four-Piece Cheese Knife Turning Kit

7/8" On Sale for only $29.99

1 1/4" On Sale for only $39.99

Save $10.00

List Price: $39.99

The cheese cutters are made from food-grade 304 stainless steel and attached to the handles which you turn. The kit includes 1/4-20 threaded inserts. The cheese cutters themselves are dishwasher safe; the handles are easily removed for this purpose.

Click here for more information or to purchase


GVS Elipse P100 Half Mask Respirator with 2 Bonus Filters, Small/Medium

For only $25.99

Save $11.99

List Price: $37.98

These Elipse P100 Half-Mask Respirators from GVS are designed to protect against dust particles, metal fumes, mists, oil and water vapors, and even some micro-organisms. Each mask includes two low-profile filters, which permit a wide field of view, and won't interfere with safety glasses and sanding shields. The filters are easily interchangeable, and replacement filters are readily available.

Click here for more information or to purchase


Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat

For only $32.74

Save $13.70

List Price: $46.44

Shell offers built-in chin protection and extended top-of-head coverage. Highly adjustable headgear tilts visor nearer or farther from face depending on preference and application. Comfortable cell foam on back of headgear. Breathable, removable, washable headband. Comfortably worn with most goggles and respirators.

Click here for more information or to purchase


4-Piece Safety Kit

For only $19.99

Save $15.00

List Price: $34.99

Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Ideal for table saw and router table use. Angled push blocks feature ultra-grippy Bench Cookie pad material. They are great for jointer and router table applications. Table featherboard assists in holding stock against the fence while sawing or routing and helps to reduce kickback. It fits standard 3/4" x 3/8" miter slots found on table saws and router tables, and features expandable miter track bars for maximum holding power.

Click here for more information or to purchase


Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Cindy Drozda
Hunter Woodturning Tools
Woodturning with Tim

(Click any Ad to go to our Sponsor's Website)