Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

UFOs Videos (7)

Sort by

Or click here to: Search All Videos


Wood Turning #120 Texted Makers Care UFO Plane
By: The Tiny Trailer Workshop
October 30, 2015 · 1,141 views

http://www.makerscare.org/ if you have a plane to submit or you just want to make a donation. https://www.youtube.com/channel/UCBB7sYb14uBtk8UqSQYc9-w?spfreload 10 Steve Ramsay Wood Working for Mere Mortals https://www.youtube.com/watch?v GSjIrrbdYWw Cedric's next video... NOW! Well here we are again! As you can probably tell from the last few shots, that I have come in contact with a little shot of conjunctivitis! And hey! As near as I can tell it was grapes that I should have washed first! Ah well! It has led to some interesting photo ops that you wouldn't normally get! And if there was a

 

Wood Turning #120 Makers Care UFO Plane
By: The Tiny Trailer Workshop
October 30, 2015 · 445 views

http://www.makerscare.org/ if you have a plane to submit or you just want to make a donation. https://www.youtube.com/channel/UCBB7sYb14uBtk8UqSQYc9-w?spfreload 10 Steve Ramsay Wood Working for Mere Mortals https://www.youtube.com/watch?v GSjIrrbdYWw Cedric's next video... NOW! Well here we are again! As you can probably tell from the last few shots, that I have come in contact with a little shot of conjunctivitis! And hey! As near as I can tell it was grapes that I should have washed first! Ah well! It has led to some interesting photo ops that you wouldn't normally get! And if there was

 

Wooturning Flying Saucer UFO
By: Peter Stewart
June 05, 2015 · 556 views

Check out my eBay store: http://www.ebay.com/usr/dste6080 This week I turned a Flying Saucer! I made the biggest piece out of Maple. The legs and the dome I made out of Cherry wood. I used a couple coats of an aerosol spar urethane for a finish. If you guys liked the video, share it and subscribe! Check back next Friday for a new video!

 

22 1/2 Myrtle Wood and Walnut UFO
By: Carl Jacobson
May 01, 2015 · 5,853 views

22 1/2' Myrtle Wood and Walnut UFO. I used the LED lights Tom sent me. DarbinOrvar Finishes http://youtube.com/darbinorvar I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits https://www.chefwarekits.com/?tracking carl Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.co

 

Wood Turning #100 An Intentional UFO
By: The Tiny Trailer Workshop
March 17, 2015 · 734 views

100 already! Seems like only a couple of months ago that I put my first T T W video up! And I think I am even more impressed that there were a hundred different things you could make on the lathe! I know there has been some overlapping of projects that are probably similar and I would imagine that will happen in the next 100 as well! Like I said in the video ... UFOs are a pretty common thing in my shop, so it was nice to be able to work on one that stayed put for a little bit. I’m not sure which is going to be best... if I left more of the plastic tea light housing in place I could probably

 

Wood Turning #100 Texted An Intentional UFO
By: The Tiny Trailer Workshop
March 17, 2015 · 859 views

100 already! Seems like only a couple of months ago that I put my first T T W video up! And I think I am even more impressed that there were a hundred different things you could make on the lathe! I know there has been some overlapping of projects that are probably similar and I would imagine that will happen in the next 100 as well! Like I said in the video ... UFOs are a pretty common thing in my shop, so it was nice to be able to work on one that stayed put for a little bit. I’m not sure which is going to be best... if I left more of the plastic tea light housing in place I could probably

 

Hollow Form UFO Spaceship For My Old Friend ET
By: As Wood Turns
August 22, 2014 · 2,688 views

http://www.AsWoodTurns.com I worked for Atari, the video game company, when the movie ET came out. The movie was a blockbuster. Our CEO immediately purchased the video game rights and shoved it thru design and production in record time to have the game in stores for Christmas. We made millions of the ET game. Alas, ET the game was a dog, the biggest video game flop of all time. Christmas sales were fantastic. But, customer returns in January were incredible. What were we to do with all those games? We tried everything we could think of: dis-assembly, recycling, crushing, and landfills. Theft

 

Return to Turning Videos

Great Bargains
(ends April 25, 2019)


Square Mini Ergonomic Carbide Turning Tool

On Sale for only $49.99

Save $30.00

List price: $79.99

This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Click here for more information or to purchase

 


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase

 


Rockler Four-Piece Cheese Knife Turning Kit

7/8" On Sale for only $29.99

1 1/4" On Sale for only $39.99

Save $10.00

List Price: $39.99

The cheese cutters are made from food-grade 304 stainless steel and attached to the handles which you turn. The kit includes 1/4-20 threaded inserts. The cheese cutters themselves are dishwasher safe; the handles are easily removed for this purpose.

Click here for more information or to purchase


GVS Elipse P100 Half Mask Respirator with 2 Bonus Filters, Small/Medium

For only $25.99

Save $11.99

List Price: $37.98

These Elipse P100 Half-Mask Respirators from GVS are designed to protect against dust particles, metal fumes, mists, oil and water vapors, and even some micro-organisms. Each mask includes two low-profile filters, which permit a wide field of view, and won't interfere with safety glasses and sanding shields. The filters are easily interchangeable, and replacement filters are readily available.

Click here for more information or to purchase


Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat

For only $32.74

Save $13.70

List Price: $46.44

Shell offers built-in chin protection and extended top-of-head coverage. Highly adjustable headgear tilts visor nearer or farther from face depending on preference and application. Comfortable cell foam on back of headgear. Breathable, removable, washable headband. Comfortably worn with most goggles and respirators.

Click here for more information or to purchase


4-Piece Safety Kit

For only $19.99

Save $15.00

List Price: $34.99

Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Ideal for table saw and router table use. Angled push blocks feature ultra-grippy Bench Cookie pad material. They are great for jointer and router table applications. Table featherboard assists in holding stock against the fence while sawing or routing and helps to reduce kickback. It fits standard 3/4" x 3/8" miter slots found on table saws and router tables, and features expandable miter track bars for maximum holding power.

Click here for more information or to purchase


Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Rubber Chucky Products
Arizona Carbide
Robust Tools

(Click any Ad to go to our Sponsor's Website)