Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Buffing Videos (29)

Sort by

Or click here to: Search All Videos


10,000 Pots of Hampshire Sheen Made in 2019 - A Sneaky Peek into How its Made.
By: Hampshire Sheen
September 03, 2019 · 195 views

September 2nd 2019 - Wow! I can scarcely begin to say thank you for your custom and support over the last 4 years as I cruise towards pouring the 10,000th pot of Hampshire Sheen finishing wax wood polishes in 2019! In this video, I give you a little peak into the manufacturing process because every pot is STILL made entirely by hand in the UK using UK sourced materials and containers. To find your nearest supplier, check out the website at www.hampshiresheen.com/buy

 

Wood buffing grit DIY
By: smallathe
July 21, 2019 · 23 views

Yorkshire grit is not expensive, it is highly recommended in many channels... but delivery to my location (IL) is horrific. So I chose to try and make my own buffing grit... Here is my first attempt. I opted for self-thinning (i.e. the more you buff the finer the media gets so you can start 'rough' buffing and get to a very fine finish effect using the same material in seconds due to the grinding media grinding itself as well :). I thought of two compounds that may do that - sodium bicarbonate, or plain baking soda and Diatomaceous earth (google that... :). I had to buy the second from Ebay as

 

031 03 03 WWRJF Buffing a Bowl 2018 12 04 17min
By: Richard Ford
December 14, 2018 · 51 views

This is how I Buff my Bowls using my Buffing Table.

 

Beall Buffing System # 132
By: The Wood Whirler
May 21, 2018 · 1,155 views

I take a look at the Beall Buffing System.

 

030 03 03 WWRJF Buffing Acrylics 11min 2017 12 20
By: Richard Ford
January 19, 2018 · 143 views

030-03-03 WWRJF - Buffing Acrylics 2017-12-20 12min 3rd Op - Buffing an Acrylic Handle, Buffing Table,Blue Rouge. Originally Uploaded:- 2017-12-21

 

Tripple Beal Buffing system modification.
By: Woodturning - My Way
November 19, 2017 · 106 views

This is the fifth in my series of videos for my Grandchilren I wanted a tripple buffing system but I didn't like the idea of using a Morse taper. Please be sure to Like and Subscribe to my Channel. Music Dragon and Toast Hall of the Mountain King from YouTube free collection. For more information on how to use a buffing system check out the following Channels WyomingWoodturner https://www.youtube.com/channel/UCRZxyT3UUS8spkIZDAsaFnA Mike Peace Woodturning https://www.youtube.com/channel/UCdIka2H34Kh-9mPhWGLwg_g You can also check out the Southplains Woodturners of Lubbock Texas https://www.youtube.com/channel/UC2rESbdPP2O684iHfwhlLEg

 

001-1 WWRJF Woodturners Buffing Mops 32min
By: Richard Ford
June 21, 2017 · 225 views

This Video details the process I use to make my Woodturners Buffing mops and the support hardware. First Uploaded Feb 26, 2011, Re-Posted 2017-06-20.

 

BUFFING: Woodturning with Sam Angelo
By: WYOMINGWOODTURNER
October 31, 2016 · 14,814 views

Sam covers the various buffing methods he uses in his shop which utilizes not only the lathe but the drill press. Stewart MacDonald link: stewmac.com (buffing supplies)

 

Shop made Buffing System for Woodturning with Sam Angelo
By: WYOMINGWOODTURNER
October 12, 2016 · 12,137 views

Sam shows how he put together a buffing system for under 10. An application that is designed for woodturning but useful for any project that would benefit from buffing. Finishing and buffing supplies at..... Link to Stewart MacDonald http://www.stewmac.com

 

How I apply finish with the beall buffing system
By: Todd Halleman
May 01, 2016 · 894 views

In this video I will show how I apply finish with the Beall buffing system. I have been learning more how to edit these videos, so I will be posting a lot more to be practicing my editing. I got the wood from nwfiguredwoods.com

 

Cheezy Platter: Final buffing
By: Don Kleinschnitz Jr.
December 23, 2015 · 47 views

 

Woodturning Tool Review Buffing System Update
By: As Wood Turns
October 09, 2015 · 5,241 views

http://www.AsWoodTurns.com After I reviewed my Beall buffing system, I received several great suggestions mainly to take it apart and mounts the buffing wheels directly to my lathe. Since the triple buff system has some utility as is, I decided to keep it as is but purchase three new buff wheels to use on my lathe. Each mount consists of: 1. 3/8 inch by 2 inch bolt 2. Lock washer 3. 2' diameter washer with 3/8 inch hole 4. 3/4 inch wood spacer with 3/8 inch hole and about 1/4 inch thick. This helps the buffing wheel center on the bolt. I turned mine from scrap wood. 5. Another 2' diameter wash

 

Woodturning Tool Review: Beall Buffing System
By: As Wood Turns
September 03, 2015 · 11,265 views

http://www.AsWoodTurns.com In this video, I review my experience with the Beall Buffing System to help you avoid my purchasing mistake. I like the results but feel my initial configuration was a mistake. Here's what I would recommend: Hold Fast Long Buffing Adapter - 31.50 Beall 4' Bowl Buff 3 Piece Set - 36.50 Beall 8' Buffing Wheel Tripoli - 16.75 Beall 8' Buffing Wheel White Diamond - 16.75 Beall 8' Buffing Wheel Wax - 16.75 Beall Buffing Compound Tripoli - 5.50 Beall Buffing Compound White Diamond - 5.75 Beall Buffing Compound Carnauba Wax 6.75 ------------------------

 

Modifying A Beall Buffing System
By: Gord Rock
July 17, 2015 · 2,359 views

I find there is not enough room between the wheels on the Beall 3-wheel buffing system so I wanted to use just 1 wheel. This is how I did it but it's not the ONLY way it could be done!

 

Carnuba Buffing
By: James Walt
July 12, 2015 · 3,473 views

How and why I finish my bowls with Carnuba wax. If you want wood to pop and show it's features you can't beat a buffed look.

 

#137 Buffing system....success!!!
By: Miguel Sanchez
July 06, 2015 · 1,819 views

This time was a success, thank you all for your help and comments. I wish you like it. Kind regards Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#136 Buffing System...Total failure
By: Miguel Sanchez
June 30, 2015 · 2,075 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez English version of this week project, end in failure but was a learning source for me, I hope for you as well. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Buffing for Woodturners
By: Mike Peace Woodturning
January 29, 2015 · 25,910 views

Mike demonstrates the ins and outs of buffing with the Beall buffing system in order to apply a smooth, tactile feel and a high gloss shine to your woodturnings. Want to support my channel? Buy your Beall Buff through my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support!

 

Woodturning: Three Stage Beall Buffing System Demonstration
By: SJWoodworks
September 17, 2014 · 14,249 views

A demonstration of how I use the three stage Beall Buffing System, on my lathe, to buff and wax the bowl I made a few weeks ago. If you do anything differently with your Beall buffer, please let me know in the comments! I'm open to learning, for sure. The video where I made this bowl: https://www.youtube.com/watch?v NJG3OzeMGxg

 

Woodturning - Buffing a Danish Oil Finish
By: Kevin Krull
April 01, 2014 · 55,065 views

For this Tips and Techniques segment I'll be demonstrating how I buff a cured Danish Oil Finish.

 

Beall Buffing System
By: IKI Woodturners
March 12, 2014 · 4,050 views

March 9th, 2014 IKI Turners Club Meeting Roger Domina gives a brief demonstration of the Beall buffing system.

 

Lathe Buffer Wheel
By: Cip's Wood Chips
July 10, 2013 · 5,132 views

I made a mesquite nature bowl. As it dryed it started to show small cracks, so I gave it a coat of tung oil. The cracks stopped but the finish was dull and foggy. I decided to build my own wheel buffer that I could power on my lathe using my Nova chuck.

 

Woodturning - Using the Chestnut Buffing Wheel System
By: Kim Gowney
January 25, 2013 · 4,485 views

A demonstration of the Chestnut Buffing wheels

 

Buffing Lacquer on Lathe-turned Art
By: WYOMINGWOODTURNER
November 20, 2012 · 42,917 views

Sam Angelo addresses important steps in 'buffing' lathe-turned pieces. He demonstrates the importance of wood preperation: applying the correct number of coats of sprayed lacquer, the method of wet sanding lacquer, and finally buffing to a mirror finish.

 

Lyle Illustrates Buffing Turned Vessels.mp4
By: Lyle Jamieson
October 01, 2012 · 5,406 views

Lyle Jamieson illustrates buffing with the 3 wheels: rouge, white diamond, and wax on turned objects.

 

Wood Buff How To Part 3 You Tube
By: J.R. Beall
April 15, 2009 · 23,267 views

The Beall Tool Company Wood Buff demo part 3

 

Wood Buff How To Part 2 You Tube
By: J.R. Beall
April 15, 2009 · 27,234 views

The Beall Tool Company Wood Buff demo part 2

 

Wood Buff How To Part 1 You Tube
By: J.R. Beall
April 15, 2009 · 49,462 views

The Beall Tool Company Wood Buff demo part 1

 

The Beall Wood Buff
By: J.R. Beall
November 25, 2008 · 19,018 views

How the buffing system works and what it will do.

 

Return to Turning Videos

Great Bargains
(ends October 24, 2019)


3M Professional Face Shield

On Sale for only $14.99

Save $3.00

List price: $17.99

Clear, 3/32" thick polycarbonate window provides an unobstructed, non-distorted view. Adjustable suspension headband fits head sizes from 6-1/2 to 8. Tips up and out of the way when not needed.

Click here for more information or to purchase

 


Rockler Carbide Pen Turning Tools

On Sale for only $109.99

Save $30.00

List Price: $139.99

This three piece set has comfortable rubber handles which provide excellent control and reduce fatigue—replaceable carbide tips require no sharpening.

Click here for more information or to purchase

 


Bar Tool Turning Kits

Get the 5 Piece Set for only $68.95

Save $15.00

Everything you need to turn out cocktails that friends will rave about—includes all five of their Bar Tool Turning Kits in one cost-saving package. Includes: bottle opener, double jigger, muddler bar, bar spoon, cocktail strainer and 5 threaded inserts.

Click here for more information or to purchase


Dust Right Lathe Dust Collection System

For only $44.99

Save $15.00

List Price: $59.99

This highly adjustable steel boom arm holds a semi-cylindrical dust scoop that closely cups your small turning projects, capturing nearly all dust!

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Flutemaster
Rockler
Stainless Steel Bottle Stoppers

(Click any Ad to go to our Sponsor's Website)