Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Demonstrations Videos (104)

Sort by

Or click here to: Search All Videos


IKI September 8th 2017 Demonstration ·
By: IKI Woodturners
November 02, 2017 · 108 views

Brian Hart demonstrates turning Polyester Resin for the club.

 

fboct15 ·
By: The Studios of Bradley R.M. Woodturning
October 15, 2017 · 19 views

60 Seconds with the Easy Wood Tools Finisher

 

1 Minute Of Woodturning ·
By: The Studios of Bradley R.M. Woodturning
October 15, 2017 · 36 views

A short 60 sec clip . Enjoy!

 

Spindle Turning with Steve Promo ·
By: Hiawatha Woodturning Club
October 15, 2017 · 34 views

Steve Promo demonstrates his workflow for turning multiple spindles. Steve goes through blank prep, marking out detail locations, and then turns a spindle. Demonstrating tuning coves and beads on a spindle for a stair railing.

 

Live Q&A Woodturning / Bottle Stopper ·
By: Carl Jacobson
October 09, 2017 · 3,437 views

Live Q&A woodturning show! In this live stream I made a Maple bottle stopper. Ruth Niles http://nilesbottlestoppers.com/ Howard Beeswax http://amzn.to/2xvcVij Yorkshire Grit http://yorkshire-grit.com/ Hampshire Sheen http://www.hampshiresheen.com/ Makers Central http://www.makerscentral.co.uk/ RZ Mask: https://rzmask.com/ Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order TOOLS I USED IN THIS VIDEO: Lathe: http://www.turnrobust.com/ Turning tools: http://www.easywoodtools

 

Nick of NZ Woodturning entertaining the crowd at Woodworking Live 2017! ·
By: Record Power
October 08, 2017 · 191 views

 

David Lowe Giving a Woodturning Demonstration at Woodworking Live! ·
By: Record Power
October 06, 2017 · 131 views

 

GRWG Demo 2017 06 SteveLoarCollaboration ·
By: Grand River Wood Turners
October 03, 2017 · 107 views

Steve Loar discusses collaboration and art, with a focus on woodturning.

 

Boring Using The Lathe ·
By: Lee Burkholder
September 12, 2017 · 172 views

Cumberland Valley Wood Turners, wood turning, wood boring, lathe, drilling wood, boring

 

POV - Dallas Area Woodturners Bowl demo 17Aug2017 ·
By: Tod Raines
August 18, 2017 · 248 views

Produced by Tod Raines on Aug 18, 2017 Dallas Area Woodturners demo at club meeting August 17, 2017. I gave a demo at our club meeting on bowl turning techniques. This video is my POV of the demo. I used a home made iPhone camera mount that hangs around my neck to give this view. I use a wide angle lens and a lav mic. Our turning club records and posts most all the demos to the club YouTube channel here: https://www.youtube.com/channel/UCBZiNA6AU3QrBRX47k4GDAg/feed The club recording of this video can be found here. https://youtu.be/BMNTisXmf0Q Link to Dallas Area Woodturners club website: http://www.dallaswoodturners.com/ Link to bandsaw circle cutting jig plans: https://sawg.org.nz/tipsnjigs/ Visit Woodturning Tool Store to shop for the Elio-DR, DVDs and hollowing cutters. https://woodturningtoolstore.com/prod... Social media links Facebook: https://www.facebook.com/woodturningt... Google : https://plus.google.com/ TodRaines

 

June Demo with Tom Ferrell ·
By: Southplains Woodturners
June 26, 2017 · 58 views

Tom Ferrell show how to thread a box.

 

June 2017 IKI Meeting - Greg Unfried Demonstrated Turning a Natural Edge Bowl ·
By: IKI Woodturners
June 22, 2017 · 297 views

June 2017 IKI Meeting - Greg Unfried Demonstrated Turning a Natural Edge Bowl

 

Practical Turning Part 3 - Episode 84 ·
By: Paul Lockwood
June 21, 2017 · 446 views

A 3 part mini series on Practical Turning using scrap softwood, This is part 3 where I use several scrap pieces of shiplap board to create pot to be used in my workshop. Part 1 - Draw / Door knobs https://youtu.be/9l9d2pFhBl4 Part 2 - A mini bowl for the workshop https://youtu.be/aCdpYfOJgcc Part 3 - This Video A small pot to hold Sandpaper, just like a pen pot Music Stars Collide (Instrumental) By Josh Woodward http://freemusicarchive.org/music/Jos... From The Free Music Archive http://freemusicarchive.org CC Attribution 4.0 International https://creativecommons.org/licenses/... Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

DON JOHNSTON TALKING DESIGN AND TURNING PLATES AND PLATTERS ·
By: Windy City Woodturners
June 14, 2017 · 22 views

ILLIANA WOODTURNERS DEMO WITH DON JOHNSTON TALKING ABOUT HOW HE DESIGNS AND TURNS HIS BEAUTIFUL PLATES AND PLATTERS.

 

KCWT 2017 5 May Liam ONeill D2 ·
By: KCWoodturners1
May 18, 2017 · 603 views

Liam O'Neill slideshow and chainsaw woodturning video demonstration. At KC Woodturner Clubhouse on 5/8/2017.

 

Gary Weiermiller Finial Demo ·
By: Hiawatha Woodturning Club
May 10, 2017 · 43 views

A Hiawatha Woodturners Club Live Demo. How to turn a finial with Gary Weiermiller.

 

Turning Between Centres Masterclass with Record Power's Stuart Pickering ·
By: Record Power
March 09, 2017 · 859 views

This masterclass gives a comprehensive introduction to turning spindles between centres.

 

Wood Coloring Techniques with Ted Laffey - LLWT Demo from January 19, 2017. ·
By: Lincoln Land Woodturners
March 06, 2017 · 38 views

LLWT Member Ted Laffey demonstrates the use of colorants and burning during the club's monthly meeting on January 19, 2017.

 

KCWTStuartShanker1 ·
By: KCWoodturners1
February 15, 2017 · 400 views

KC Woodturner member Stuart Shanker demonstrates turning a cheese platter at the KC Woodturner's Clubhouse on 2/13/2017.

 

Turn It Up Event ·
By: Axminster Tools & Machinery
February 10, 2017 · 801 views

‘Turn It Up’ With Mark Sanger And Richard Findley (Saturday 4th March 2017). The long awaited and much anticipated showdown between Mark Sanger and Richard Findley (both champions in their own right) at our Nuneaton store is just around the corner and, for all turning enthusiasts, it is an event not to be missed. We have put together an action-packed schedule for our two protagonists and we will be asking the audience to vote for their favourite at the end of each round. As an added bonus, the event will be hosted and kept on track by none other than our own international woodturning professi

 

Clase de roscado en General Alvear ·
By: brunogausa
February 05, 2017 · 568 views

Clase de roscado en el primer encuentro latinoamericano de torneros, en General Alvear, Mendoza

 

EWT Green Short No Overhead Shot 1 ·
By: The Studios of Bradley R.M. Woodturning
February 01, 2017 · 37 views

A new short video clip from last weekend in Columbus OH at The Woodworking Shows. It;s always something seems like. This one, the overhead camera was not recording ( you can see that shot in my stage monitor screen) and I have an electrical hum that I don't have time to find the right filter to make it go away. Will take care of that in Indianapolis this weekend. Enjoy 20 min at The Woodworking Shows with me

 

Talking Woodturning Weekends and Axminster demo (Warrington) ·
By: Blind Wood Turner
January 23, 2017 · 452 views

Find out more about the Woodturning Weekends: http://warwickfisher.com/product/woodturning-weekend

 

January Demo ·
By: Southplains Woodturners
January 20, 2017 · 69 views

 

December Demo ·
By: Southplains Woodturners
December 21, 2016 · 640 views

 

November Demo ·
By: Southplains Woodturners
December 03, 2016 · 145 views

With Larry Rogers

 

Simple Swan Neck Hollower Demo in a Hollow Form - Simple Woodturning - 2 ·
By: Kerry Harrison
November 11, 2016 · 3,283 views

Demonstration of the Simple Swan Neck Hollower tool in a hollow from with the Simple Hollowing System. - Simple Woodturning Video #2 Tools used: Simple Swan Neck Hollower (SSNH) - https://harrisonspecialties.com/simple-swan-neck-hollower-carbide-tipped-woodturning-lathe-vessel-hollowing-tool/ Simple Shear Cutting Finisher (SSCF) - https://harrisonspecialties.com/simple-shear-cutting-finisher-round-carbide-tipped-woodturning-hollowing-lathe-tool/ Simple Hollowing System (SHS) - https://harrisonspecialties.com/simple-hollowing-system/ Full line of Simple Woodturning Tools & accessories - https://harrisonspecialties.com/simple-woodturning-tools-accessories

 

September Demo ·
By: Southplains Woodturners
September 30, 2016 · 266 views

This is the September demonstration by Christian Jensen

 

sandcarved painted disk ·
By: Al Hockenbery
September 27, 2016 · 76 views

This is part of a demo given to the Tri-County Woodturners in September 2025. this demo shows sand carving a seahorse and a petroglyph sun on painted turned disk.

 

Alex Amoruso - Tangential Woodturning #2 ·
By: Ocean Woodturners
August 30, 2016 · 1,342 views

Alex Amoruso gives another tangential woodturning demonstration at the Ocean Woodturners August 2016 meeting in Rumford, RI. For more information visit http://www.oceanwoodturners.com

 

2016 July Demonstration ·
By: Southplains Woodturners
July 08, 2016 · 99 views

This is the Demonstration segment of our July meeting. Jim Bob Burgoon is the Demonstrator.

 

Spindle Turning with Jerry Sievers - LLWT Demo from April 21, 2016. ·
By: Lincoln Land Woodturners
July 04, 2016 · 66 views

 

Oneway termite end grain hollower demonstration ·
By: Boston Woodturning
June 21, 2016 · 1,622 views

Oneway termite end grain hollower demonstration, first time used!

 

Northwest Washington Woodturners Club Demo. ·
By: Carl Jacobson
June 20, 2016 · 1,652 views

Thanks for all the help finding the right sand for the pendulum. I wanted to thank the NWW for having me up for a club demo and class Thursday, and Friday. Then it was off to Woodcraft for a box turning class Saturday. Northwest Washington Woodturners http://www.nwwwt.org/ Northwest Woodturners https://nwwt.wildapricot.org/ Josh's Channel https://www.youtube.com/channel/UCM4H4M4vCHPv12FLP9qgwBw/featured Replacement Sand for Pendulum http://astore.amazon.com/thewood0c-20/detail/B009P8BACA I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c

 

Woodturning Cryptex Club Demo ·
By: Carl Jacobson
June 13, 2016 · 1,881 views

I have a club demo Thursday for the NWWW in Mt Vernon Wa. I'm demonstrating how to make a cryptex. I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robust dealer if you have any questions I'd be more than happy to help. jacobson68@yahoo.com Robust Wood

 

Jimmy Clewes Demo ·
By: Carl Jacobson
March 21, 2016 · 6,796 views

Jimmy's Website http://www.jimmyclewes.com/ Woodchuckers https://www.facebook.com/groups/harri.woodchuckers/ Sterling Davis https://www.youtube.com/user/SterlingsWoodcrafts Dominic Bender tree chanllange https://www.youtube.com/user/DominicsWoodworks Pen Challenge https://www.youtube.com/channel/UCUj031ZU63AF_pJEBiRkROQ UKIWS Symposium http://www.ukiws.co.uk/ Mike Waldt https://www.youtube.com/user/TheCymruBoy Martin Saban-Smith https://www.youtube.com/user/workingimage Steve Twydell https://www.youtube.com/user/stevo15771/featured Video WoodWorkers http://videowoodworkers.com/ I up

 

Ray Cole demonstrates techniques learned at David Ellsworth class ·
By: Rocky Mountain Woodturners
November 14, 2015 · 3,641 views

Ray Cole demonstrates bowl turning techniques learned at a David Ellsworth class conducted at the Anderson Ranch to the Rocky Mountain Woodturners on November 5, 2015.

 

Demonstration of one handed woodturning ( not a tutorial ·
By: woodturner21
September 25, 2015 · 2,880 views

DO NOT TRY THIS AT HOME IT CAN BE DANGEROUS This is a demonstration of how you can turn one handed. In response to a customers comments. I have been turning for many years and it will take a lot of practice to master but It goes to show if you have a handicap it does not mean you can not participate in the craft of woodturning. If you would like to try woodturning and have a disability it is always advisable to seek professional advise. There are many turners who have overcome disabilities of all shapes and sizes, I admire them all. So get out there and try this most rewarding of crafts.

 

Using the Golden Ratio (1.618) in Woodturning ·
By: M. Saban Smith Woodturning
September 23, 2015 · 6,922 views

The Golden Ratio of 1.618 has been used for thousands of years by humans to create beautiful objects and art, and even longer by nature. In this video, I put it to a little test to see if you can successfully apply the ratio to wood turning. ...and before anyone mentions it, yes, I did leave off the height of the bowl in proportion to the diameter. I'll have to do a another one! Carls's Channel: http://www.youtube.com/user/HaydenHD See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly downloa

 

Episode 7: This Week's Production and Some Proportional Maths Stuff ·
By: M. Saban Smith Woodturning
September 18, 2015 · 1,822 views

It's been a productive week this week, which is great. I turned a sister piece to Golden Fire, Beech and Cedar of Lebanon bowls, plus a couple of other bits. We take a look at the Cherry bowl again and I also give an overview of the stains used in Golden Fire, plus the airbrush kit I used. And...I briefly examine the maths behind aesthetics and proportions before the main video next week. Some Useful Links: Hampshire Sheen: http://www.msabansmith.com/shop/finishes/hampshire-sheen/ Read Turner's Rest Free Turner's Magazine: http://www.turnersrest.com. You can read more about Turner's Jour

 

Les Brandt 8 8 15 ·
By: Stateline Woodturners
September 13, 2015 · 108 views

Les Brandt demonstrates at the Stateline Woodturners Meeting in August of 2015.

 

Beth Ireland Demo ·
By: Upper Valley Woodturners
September 05, 2015 · 269 views

Description

 

Ken Ness June 2015 ·
By: Stateline Woodturners
August 10, 2015 · 34 views

Ken Ness demonstrates how to use pewter to enhance woodturnings.

 

Alex Amoruso - Tangential Woodturning ·
By: Ocean Woodturners
July 28, 2015 · 980 views

Alex Amoruso demonstrates tangential woodturning at the Ocean Woodturners July 2015 meeting in Providence, RI. For more information visit http://www.oceanwoodturners.com

 

Sgraffito for Woodturning - Les Brandt ·
By: Woodturners of Southwest Missouri
July 21, 2015 · 22,814 views

Les Brandt from Eureka Springs, AR demonstrates how to turn a platter and then use carving tools to cut through Black Gesso applied to the piece to create the Sgraffito appearance much like that is used in pottery. Les has many of his turnings displayed on his website: http://www.lesbrandtstudios.com/ The Woodturners of SW MO meet monthly in Springfield, MO. http://www.woodturnersofswmo.org/ For a complete list of resources that Les mentions in the video: http://www.woodturnersofswmo.org/wp-content/uploads/2015/07/Sources-for-Sgraffito-Platter-materials.pdf

 

SPSW 061 Soren Berger Demo partial ·
By: SPSW Video Library
June 20, 2015 · 184 views

This is only part of Soren's demonstration at a Woodturning Club.

 

Walnut Candelabra Demonstration - Rob Davis ·
By: Woodturners of Southwest Missouri
February 09, 2015 · 3,926 views

The Woodturners of SW MO have a bi-monthly turning challenge. One of those in 2014 was a “candle stand.” Rob Davis took it to the next level with his Candelabra with all turned pieces. Some thought it was bent wood but everything was turned. In this video he shares the process along with jigs he built along the way. He uses the left over wood from the candle stand to turn bracelets or bangles. Be sure to check it out at: http://youtu.be/p_hM1zadJQg. Visit us at: www.woodturnersofswmo.org

 

#58 Woodturning Duplicating without a Duplicator ·
By: Stephen Ogle
January 18, 2015 · 12,073 views

A revisit to my very first woodturning video. Hopefully showing more clearly a good method for duplicating parts on the lathe without using an actual duplicator. Works for all spindle turned projects.

 

The Blind Wood Turner - Episode 11 Axminster Demonstration ·
By: Blind Wood Turner
November 23, 2014 · 912 views

In this video Dean and I head off to Axminster Warrington to listen to a master wood turner called Andy Rounthwaite.

 

Easy Wood Tools Demo Pt2 ·
By: Woodcraft of Spokane
August 18, 2014 · 1,785 views

Joel demonstrates the Easy Wood Tools product line, , , including the just introduced Parting Tool. He discusses and shows the simple, proper, techniques for using these great tools. Easy Finisher Easy Rougher Easy Detailer Easy Chuck (also available, but not shown, are the Easy Hollowers - maybe another video)

 

Easy Wood Tools Demo Pt1 1 ·
By: Woodcraft of Spokane
August 18, 2014 · 5,594 views

Joel demonstrates the Easy Wood Tools product line, , , including the just introduced Parting Tool. He discusses and shows the simple, proper, techniques for using these great tools. Easy Finisher Easy Rougher Easy Detailer Easy Chuck (also available, but not shown, are the Easy Hollowers - maybe another video)

 

Mick Hutchison ·
By: Stateline Woodturners
May 17, 2014 · 82 views

Mick Hutchison, a member of the Stateline woodturners club, demonstrates turning a segmented vase.

 

Liam ONeill on Chainsaw Woodturning ·
By: Mid-Maryland Woodturners Club
May 07, 2014 · 29,357 views

Liam O'Neill demonstration covering his chainsaw turning techniques and lidded boxes at the April 2014 meeting of the Mid-Maryland Woodturners Club meeting in Frederick, MD.

 

Art of Woodturning - Mark Supik, video by Carlin Leslie ·
By: marksupikco
April 12, 2014 · 427 views

Carlin Leslie visited our woodturning shop in Baltimore, MD to talk with Mark about the art of woodturning. Thanks for sharing your video project with us.

 

Cylinder with SideGround gouge Push & Pull cuts ·
By: Al Hockenbery
April 05, 2014 · 402 views

A clip from a multi-center napkin ring demonstration at Tri-County Woodturners, Video by Jan Brown. Shows using the bowl gouge bevel riding push cut and the pull cut (slicing cut) to turned a cylinder and how those cuts relate to bowl turning

 

Use of a Historic Woodturning Tool ·
By: Jake Gevorgian
March 07, 2014 · 1,864 views

via YouTube Capture

 

Woodturning - one handed turning presentation (uncut footage) ·
By: Jake Gevorgian
January 28, 2014 · 2,588 views

Labor improbus omnia vincit. This is to my friends out there who had accident and lost an arm. I am using just one arm to demonstrate how woodturning can be done even with one hand. Just don't lose the spirit, passion. Hard work can succeed all. Sorry there's no audio in this video due to the noise in the shop.

 

Trent at the lathe ·
By: marksupikco
December 06, 2013 · 58 views

 

Ebonizing Wood 3 Ways ·
By: Woodturners of Southwest Missouri
October 30, 2013 · 57,198 views

Les Casteel a member of the Woodturners of Southwest Missouri demonstrates how he Ebonizes wood. He explains three different ways to do this and throws in a little science just to make it fun! To find out more about the Woodturners of SW MO visit our website at http://www.woodturnersofswmo.org/. You can find Les Casteel's website at: http://www.woodthatrocks.com

 

Cross Axis Turning ·
By: DentonTurners
June 05, 2013 · 3,805 views

Sam Slovak demonstrates a technique for cross-axis turning. This results in a spiral pattern along the length of the spindle. Sam is our current Vice President of our wood turning club www.goldentrianglewoodturners.org

 

Ice Skater 1 ·
By: charlieb1946
May 31, 2013 · 122 views

Turning on a lathe, on just one axis, creates a single, symetric about that axis, sculpture - a spindle, a finial, a plate, a bowl, a christmas ornament, a lidded box, a hollow form / vase, etc.. You can color the outside surface, burn or carve patterns in it, or pierce it - but you still have but one profile. When you play with only PART of a single axis turning, you have a LOT more possibilities to play with ( or, for the English Majors - you have a lot more possibilities with which to play). Rather than just an Outside, you have a front, back and sides - that curve. You can use diffe

 

woodturning virus inoculated to kids ·
By: Truciolara
January 15, 2013 · 1,079 views

This movie, done By FAARM, illustrates how kids can be fascinated by wood turning. Instinctively they want to touch and smell what they believe to be an art miracle. Enjoy the vision

 

Dale Bonertz demonstrates the McNaughton Center Saver ·
By: Rocky Mountain Woodturners
May 14, 2012 · 46,794 views

Dale Bonertz gives a detailed demonstration of the use of the McNaughton Center Saver for coring bowl sets. Presented to the Rocky Mountain Woodturners on January 5, 2012

 

There Are Times When A Copier Can't Turn The Wood! Here Is The Case. ·
By: Jake Gevorgian
December 14, 2011 · 1,297 views

I was turning 22 pieces of these, all 99% the same in dimensions, and the reason why a copier can't turn this shape, (Actually I know how but I won't tell to those CNC lathe operators, let them be one level low;) I had to manually turn these pieces. Whew, my legs are killing me!

 

RayKeyDemoIntrob.mov ·
By: weekendturner.com
July 02, 2011 · 1,911 views

British master woodturner Ray Key demonstrates his bowl technique for the Woodturners Guild of North Carolina on June 30, 2011. This is the introductory comments from both WGNC President Glen Theiss and Ray Key's opening remarks about the state of woodturning in Great Britain. After this, there are 8 more clips from the demo. UPDATED: Fixing audio synch

 

RayKeyDemo1of8b.mov ·
By: weekendturner.com
July 01, 2011 · 6,364 views

British master woodturner Ray Key demonstrates his bowl technique for the Woodturners Guild of North Carolina on June 30, 2011. Clip 1 of 8. UPDATED: To fix audio synch

 

RayKeyDemo3of8b.mov ·
By: weekendturner.com
July 01, 2011 · 3,433 views

British master woodturner Ray Key demonstrates his bowl technique for the Woodturners Guild of North Carolina on June 30, 2011. Clip 3 of 8. UPDATED: To fix audio synch

 

RayKeyDemo8of8b.mov ·
By: weekendturner.com
July 01, 2011 · 2,516 views

British master woodturner Ray Key demonstrates his bowl technique for the Woodturners Guild of North Carolina on June 30, 2011. Clip 8 of 8.

 

RayKeyDemo2of8b.mov ·
By: weekendturner.com
July 01, 2011 · 3,706 views

British master woodturner Ray Key demonstrates his bowl technique for the Woodturners Guild of North Carolina on June 30, 2011. Clip 2 of 8.

 

RayKeyDemo4of8b.mov ·
By: weekendturner.com
July 01, 2011 · 3,436 views

British master woodturner Ray Key demonstrates his bowl technique for the Woodturners Guild of North Carolina on June 30, 2011. Clip 4 of 8.

 

RayKeyDemo7of8.MOV ·
By: weekendturner.com
July 01, 2011 · 2,039 views

British master woodturner Ray Key demonstrates his bowl technique for the Woodturners Guild of North Carolina on June 30, 2011. Clip 7 of 8.

 

RayKeyDemo6of8.MOV ·
By: weekendturner.com
July 01, 2011 · 2,266 views

British master woodturner Ray Key demonstrates his bowl technique for the Woodturners Guild of North Carolina on June 30, 2011. Clip 6 of 8.

 

RayKeyDemo5of8.MOV ·
By: weekendturner.com
July 01, 2011 · 2,347 views

British master woodturner Ray Key demonstrates his bowl technique for the Woodturners Guild of North Carolina on June 30, 2011. Clip 5 of 8.

 

Alan_Leland_Sharpenning6.mov ·
By: weekendturner.com
June 11, 2011 · 388 views

Professional woodturner Alan Leland demonstrates tool sharpening and basic tool techniques at the June 2011 meeting of the Woodturners Guild of North Carolina. Clip 6 of 6.

 

Alan_Leland_Sharpenning5.mov ·
By: weekendturner.com
June 11, 2011 · 194 views

Professional woodturner Alan Leland demonstrates tool sharpening and basic tool techniques at the June 2011 meeting of the Woodturners Guild of North Carolina. Clip 5 of 6.

 

Alan_Leland_Sharpenning4.mov ·
By: weekendturner.com
June 11, 2011 · 292 views

Professional woodturner Alan Leland demonstrates tool sharpening and basic tool techniques at the June 2011 meeting of the Woodturners Guild of North Carolina. Clip 4 of 6.

 

Alan_Leland_Sharpenning3.mov ·
By: weekendturner.com
June 11, 2011 · 361 views

Professional woodturner Alan Leland demonstrates tool sharpening and basic tool techniques at the June 2011 meeting of the Woodturners Guild of North Carolina. Clip 3 of 6.

 

Alan_Leland_Sharpenning2.mov ·
By: weekendturner.com
June 10, 2011 · 522 views

Professional woodturner Alan Leland demonstrates tool sharpening and basic tool techniques at the June 2011 meeting of the Woodturners Guild of North Carolina. Clip 2 of 6.

 

Alan_Leland_Sharpenning1.mov ·
By: weekendturner.com
June 10, 2011 · 1,184 views

Professional woodturner Alan Leland demonstrates tool sharpening and basic tool techniques at the June 2011 meeting of the Woodturners Guild of North Carolina. Clip 1 of 6.

 

Joe & John Supik Woodturning ·
By: marksupikco
December 12, 2010 · 994 views

Joe & John Supik Woodturning

 

Xermade_2009 ·
By: torneiro09
September 12, 2009 · 348 views

 

Xermade_2009 ·
By: torneiro09
September 12, 2009 · 2,798 views

 

Xermade_2009 ·
By: torneiro09
September 12, 2009 · 1,048 views

 

Xermade_2009 ·
By: torneiro09
September 12, 2009 · 284 views

 

Xermade_2009 ·
By: torneiro09
September 12, 2009 · 398 views

O Mestre Lolo, das Pontes de García Rodríguez, impartindo unha clase maxistral co torno

 

Xermade_2009 ·
By: torneiro09
September 12, 2009 · 177 views

O Mestre Lolo

 

Xermade_2009 ·
By: torneiro09
September 12, 2009 · 488 views

 

Xermade_2009 ·
By: torneiro09
September 12, 2009 · 121 views

 

Xermade_2009 ·
By: torneiro09
September 12, 2009 · 265 views

Trompo feito por Lolo e que vira nas dúas posicións

 

Xermade_2009 ·
By: torneiro09
September 12, 2009 · 297 views

O Mestre Lolo facendo un trompiño

 

Xermade_2009 ·
By: torneiro09
September 12, 2009 · 428 views

 

Xermade_2009 ·
By: torneiro09
September 12, 2009 · 69 views

 

Mark Supik & Co Woodturning ·
By: marksupikco
August 17, 2009 · 10,514 views

Yolanda Vazquez of Maryland Public Television tours Mark Supik & Co. Woodturning in Baltimore, Maryland. Mark demonstrates spindle turning. Joe & John Supik demonstrate face plate turning and copy lathe work. Danielle Craven-Slaski finishes custom beer taphandles. Mark talks about the history of his business, producing beer tap handles for microbreweries, turning custom architectural pieces, woodturned art bowls and the woodturning workshops he offers for beginners. Great views of vintage lathes in operation. www.marksupikco.com

 

Torneiros de Xermade - 2008 ·
By: torneiro09
August 07, 2009 · 457 views

VIII Encontro de torneiros en Xermade. Un dos mellores 'atopamentos' entre torneiros de calquera galaxia.

 

Torneiros de Xermade - 2008 ·
By: torneiro09
August 07, 2009 · 477 views

VIII Encontro de torneiros en Xermade. Un dos mellores 'atopamentos' entre torneiros de calquera galaxia.

 

Torneiros de Xermade - 2008 ·
By: torneiro09
August 07, 2009 · 625 views

VIII Encontro de torneiros en Xermade. Un dos mellores 'atopamentos' entre torneiros de calquera galaxia.

 

Torneiros de Xermade - 2008 ·
By: torneiro09
August 07, 2009 · 1,089 views

VIII Encontro de torneiros en Xermade. Un dos mellores 'atopamentos' entre torneiros de calquera galaxia.

 

Torneiros de Xermade - 2008 ·
By: torneiro09
August 07, 2009 · 781 views

VIII Encontro de torneiros en Xermade. Un dos mellores 'atopamentos' entre torneiros de calquera galaxia.

 

Torneiros de Xermade - 2008 ·
By: torneiro09
August 07, 2009 · 2,005 views

VIII Encontro de torneiros en Xermade. Un dos mellores 'atopamentos' entre torneiros de calquera galaxia.

 

Torneiros de Xermade - 2008 ·
By: torneiro09
August 07, 2009 · 725 views

VIII Encontro de torneiros en Xermade. Un dos mellores 'atopamentos' entre torneiros de calquera galaxia.

 

Torneiros de Xermade - 2008 ·
By: torneiro09
August 07, 2009 · 1,019 views

VIII Encontro de torneiros en Xermade. Un dos mellores 'atopamentos' entre torneiros de calquera galaxia.

 

Torneiros de Xermade - 2008 ·
By: torneiro09
August 07, 2009 · 531 views

VIII Encontro de torneiros en Xermade. Un dos mellores 'atopamentos' entre torneiros de calquera galaxia.

 

Torneiros de Xermade - 2008 ·
By: torneiro09
August 07, 2009 · 1,519 views

VIII Encontro de torneiros en Xermade. Un dos mellores 'atopamentos' entre torneiros de calquera galaxia.

 

Torneiros de Xermade - 2008 ·
By: torneiro09
August 07, 2009 · 647 views

VII Encontro de torneiros en Xermade. Un dos mellores 'atopamentos' entre torneiros de calquera galaxia.

 

Return to Turning Videos

Great Bargains


Heavy Duty Live Center

On Sale for only $16.53

List Price: $19.95

Click here for more information or to purchase

 


Dremel Rotary Tool Kit

On Sale for only $139.00

Save $60.99 (30%)

List price: $199.99

Click here for more information or to purchase


Roller Stand

On Sale for only $23.79

Save $6.11 (20%)

List Price: $29.90

Click here for more information or to purchase

 


Easy Wood Tools - Easy Start Rougher + Finisher + Detailer

On Sale for only $159.99

List price: $206.97

These tools have the smaller 9" maple handle and are 12.5" overall.

Click here for more information or to purchase


NOVA 48232 G3 Reversible Wood Turning Chuck

On Sale for only $99.00

Save $60.99 (38%)

List price: $159.99

Click here for more information or to purchase

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Rubber Chucky Products
Imaginlay
Stainless Steel Bottle Stoppers

(Click any Ad to go to our Sponsor's Website)