Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Embellishment Videos (352)

Sort by

Or click here to: Search All Videos


Blue Silver Gold Rim
By: Stewart Furini
July 22, 2018 · 613 views

A base coat of Chestnut Spirt Stains followed by Jo Sonja acrylic paints with Kleister medium. Finished with Hycote lacquer. Getting very close to 2000 subs now - will this video get me there?? Please be aware that woodturning is a hazardous activity. These videos are only intended to show you what I do - they are not tutorials. Thank you to Chestnut Products for their support.

 

Easy Airbrushing With Stencils / Myrtlewood Platter
By: Carl Jacobson
July 20, 2018 · 5,779 views

Check out my gear on Kit: https://kit.com/CarlJacobson I turned this Myrtlewood platter on the lathe, and put some detail on the rim with my new Easy Wood Micro Detailer. After turning and sanding it up to 600 grit. I painted a Maple leaf using a airbrush and stencil from Chroma Craft. I finished the piece off with three coats of high gloss lacquer Chroma Craft: https://www.chroma-craft.com/ I put together a list of some of the tools I use in my shop (affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link: https://www.amazon.com/shop/thewoodshoptv

 

Turning with Glow Inlay Powder Woodturning How-to
By: Craft Supplies USA
July 12, 2018 · 3,042 views

Today we'll cover how to add Glow Inlay Powder to a Comfort Ring Core. Shop: https://www.woodturnerscatalog.com/p/47/7065/Turners-Select-Glow-Inlay-Powder?utm_source youtube&utm_medium description&utm_campaign videos Inlay is a fun way to add a unique look to your turnings. Our Glow Inlay Powder looks good on it's own, but it also glows for up to ten hours. We'll show you how to add it into your next project using our simple instructions. PRODUCTS USED: Glow Inlay Powder - https://www.woodturnerscatalog.com/p/47/7065/Turners-Select-Glow-Inlay-Powder?utm_source youtube&utm_medium supplies-ke

 

Blending Embellishments/Decorative Display piece by Sam Angelo
By: WYOMINGWOODTURNER
July 09, 2018 · 2,335 views

In this video Sam Angelo begins to develop a topic for a demonstration. He works on 2 ash pieces, 8 inches square. He scorches, colors, applies texture, and adds a bit of metal leaf along with some other decorative elements. For more information on Sam's work, visit the following sites: http://www.wyomingwoodturner.com https://goo.gl/FLDCCB Sam Angelo.com ETSY shop https://goo.gl/RJsS5T

 

Woodturners Journal: Quick Mesquite Bowl with Blue Sand Filler
By: Woodturners Journal
July 09, 2018 · 1,133 views

Facebook Group: https://www.facebook.com/groups/1437251519906713/ Colored Sand: https://amzn.to/2J5BuId Assorted Sanding Pads: https://amzn.to/2L251o8 Bulk CA Glue: https://amzn.to/2uion0X

 

spaltedvase ulnes walton crafts
By: Chris Parker
July 08, 2018 · 167 views

Essentially a exercise in form ,shape and flow For me always learning .The piece of maple i used for this was exetremly dry and needed an awful lot of prep to be able to take the colour and finish properly .hope you ejoy the video if you do like the vid and want to see more please like share and subscribe . !!!THIS NOT A TUTORIAL !!!

 

127 Woodturning - Sandblasted Elm Bowl
By: Roweville Retro
June 30, 2018 · 60 views

This week, I create a cool effect by sandblasting a large elm bowl. Music from http://www.gosoundtrack.com, under Creative Commons Attribution License: https://creativecommons.org/licenses/by/4.0

 

Woodturning, Burning, Coloring A Different Box Style
By: As Wood Turns
June 29, 2018 · 2,130 views

http://www.AsWoodTurns.com Our club challenged us to turn a box according to the style of Benoit Averly who demonstrated at the Utah Woodturning Symposium. His style included boxes with tall tapered lid bxtured and stained with a finial. But I still like to put my own stamp on a project. Instead of texturing the entire surface with carving, I used my pyrography gear. Instead of staining the entire surface, I opted for a variegated red, orange, yellow surface. My box is about 9 inches tall including the finial and about 2 1/2 inches in diameter. Colors are red, yellow, and black alcohol dyes

 

Stencilled Platter Rim
By: Stewart Furini
June 24, 2018 · 904 views

In this video I have a go with a commercially available stencil with airbrushed spirit stains and a textured inner rim on a 12 inch beech blank which I make another platter from - how many platters does the world need! TBH I'm not sure about this one, so let me know what you think. Comments always welcome....and I'm getting close to 2000 subs so watch out for a giveaway if I get to 2K! Please be aware that woodturning is a hazardous activity. These videos are only intended to show you what I do - they are not tutorials.

 

Woodturning Dye Practice - A Juicy Apple
By: As Wood Turns
June 22, 2018 · 1,836 views

http://www.AsWoodTurns.com Part of my childhood was spend on a fruit farm. We grew a lot of apples - mostly red ones. For this project, I decided to turn an apple. Too bad it is from maple wood. One tool that makes it easier is a screw chuck provided by Bert Desilse of Alberta, Canada. It is a metal piece that it held in place by standard chuck jaws. It contains a replaceable square drive screw that is held in place by a square drive bit. A very nice design. For color, I used alcohol based red, green, and yellow dyes applied with cue tips and a Richeson atomizer. I sanded back much of the dye to blend it together and allow a mottled final color. When completed, I sprayed it with rattle can lacquer. Enjoy! Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Traumerei by Shumann performed by Becky Schlappi. Used with permission.

 

Multi layered Paint Effect
By: Stewart Furini
June 16, 2018 · 815 views

Stand by for thinking 'yuck!'....colours might not be to everyone's taste! Just a bit of fun trying out a new technique - multiple layers of acrylic paint which are then sanded back to reveal the lower colours. This is my first go at this - room for learning and doing better in future. Finished with Chestnut acrylic gloss lacquer. Stickers: Wood 'n Metal Shoppe https://www.youtube.com/channel/UCKjZDEgeBqpUx2NvBdCckzg Martin Cotilliard https://www.facebook.com/martin.cotillard.15 Please be aware that woodturning is a hazardous activity. These videos are only intended to show you what I do - they are not tutorials.

 

Yorkshire Grit Microfine - The Milliput Test
By: Jim Overton - Jimson's Stuff
June 03, 2018 · 2,493 views

In this video I will be testing the new product from Yorkshire Grit. It is called Microfine and gives a higher polish than the original Yorkshire. Yorkshire Grit Microfine will be launched at UKIWS on June 30th 2018 at the Hilton Double Tree Hotel in Coventry. I am using a yellow Milliput, which is just a sample colour and not currently available. New Colours will be available in time and I will keep you informed. I will also be trying out the Easy Wood Tools No. 2 Easy Hollower. I got the idea for the depth gauge from Sam Angelo, The Wyoming Woodturner https://youtu.be/WU2PLmoLIR0 Milliput

 

New Milliput Colours - Robert Sorby Turnmaster and Big Easy Jaws
By: Jim Overton - Jimson's Stuff
May 27, 2018 · 4,547 views

In this video I will be using some new test colours from Milliput. These colours are not available at the moment and Milliput would like some feedback on colours people would like to see. I will also be trying out the Robert Sorby Turnmaster and using my Easy Wood Tools Big Easy Jaws on my Easy chuck. Milliput https://www.milliput.com/ Yorkshire Grit woodturner's abrasive paste http://yorkshire-grit.com/ Robert Sorby https://www.robert-sorby.co.uk/ Easy Wood Tools http://www.easywoodtools.com/ Mould making and casting materials from MBFG http://www.mbfg.co.uk/ My name is Jim Overton, wel

 

Paint Pouring Bowl #2 'Dirty Pour'
By: Carl Jacobson
May 25, 2018 · 7,955 views

Check out my gear on Kit: https://kit.com/CarlJacobson This is our second attempt at paint pouring. I turned a natural edge bowl on the lathe before painting it. We tried a technique called dirty pour, it's when you mix all the paint in one cup. TOOLS I USED IN THE VIDEO///// Robust Lathe http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.com/ Thompson Lathe Tools http://thompsonlathetools.com/ Starbond CA Glue https://www.starbond.com/ Air Sander http://woodturnerswonders.com/ Vacuum Chuck https://www.chefwarekits.com/?trackin... Howard Beeswax https://www.woodcraft.com

 

Transferring Inkjet Image to Wood
By: woodturningwithtim1
May 25, 2018 · 22,890 views

Using an inkjet printer and discarded shipping label paper Tim shows you how to apply images to your turned items. Shipping labels: https://www.amazon.com/gp/product/B0069RY9BY/ref oh_aui_search_detailpage?ie UTF8&psc 1 You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Wood turning - Garnet gems inlay on Yew bowl
By: CraftWithAfshin
May 24, 2018 · 819 views

---Please also check out these wonderful wood turners--- Mike Waldt : https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w RickTurns : https://www.youtube.com/channel/UCghK0Pjzr5YaZK2SlC2Dftw Carl Jacobson : https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Stuart Arts : https://www.youtube.com/channel/UCrux70rjZflDA6-ypvaH8DQ Heath Knuckles:https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ Aleksey Bek : https://www.youtube.com/channel/UCz-hSlcLGBOfzw9RKs7m_5g M. Saban Smith Woodturning: https://www.youtube.com/channel/UCpHZv5j6vdMmFjXHDBxPLxw Andy Phillip : https://ww

 

Textured Iridescent Platter
By: Stewart Furini
May 24, 2018 · 1,168 views

Another go with Chestnut Products Iridescent Paints, perhaps a bit subtler than some other ways of using them. The platter rim was textured with a Robert Sorby texturing tool, then sealed and sprayed with ebonising lacquer before the iridescent paints were added. The rim was finished with Hycote acrylic lacquer and the middle of the platter with Chestnut Cut 'n' Polish. Please be aware that woodturning is a hazardous activity. These videos are only intended to show you what I do - they are not tutorials.

 

Woodturning at 54a. #136 Marble-ous Milliput
By: Keith Barrow
May 17, 2018 · 2,250 views

Here's my first half decent attempt at using Milliput,on a Padauk bowl blank.It's not very good,but I'll keep experimenting with it! It will take me a long time to get up to Jim Overton's standard! (Jimsons stuff) For information on Milliput,please go to: www.milliput.com For Seggys and Centre Finders,please go to: www.woodturningat54a.com

 

#88 Fixing the Turaco Damage
By: M. Saban Smith Woodturning
May 17, 2018 · 2,049 views

Here's a short video about I repaired the damage in the Turaco sycamore piece in video #87 Here's the link to the main video for this piece: https://www.youtube.com/watch?v KgZzB13432A ********************************** Visit my website for Hampshire Sheen, Intrinsic Colours, Witty Turner's Clothing and Gifts, Hints and Tips: http://www.msabansmith.com ********************************** Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com ********************************** Find Me on Other Social Media Facebook: http://www.facebook.com/msabansmith Twitter: http://www.t

 

Iridescent Paint Platter Rim
By: Stewart Furini
May 15, 2018 · 1,388 views

A first play with Chestnut Products' new iridescent paints, and I mean play...no finished platter this time, just seeing how these paints perform and what they look like when dry. Stay tuned till the end for a look at all the nine colours that are available. Many thanks to Terry from Chestnut for giving me a set of the colours to try at Makers Central 2018. I have to say that Nick Zametti did a fanatastic job with his team laying on Makers Central. It was a great show and it was amazing to meet so many other YouTube Makers and viewers. Sorry if I met you and didn't get to name you in this vid

 

Acrylic Pour Painting on Pet Urn
By: DeadTreeWoodWorks
May 05, 2018 · 292 views

This video is how I do a pour painting on the pet urns that I sell on Etsy. Though this item will be listed for sale later, check out our shop for similar and not so similar items: https://etsy.me/2HScgBA Products used in this video: *I could not find a link online for the Black Acrylic Primer that I used as a base but you should be able to find it at your local hardware store. -Carbon Black http://www.guerrapaint.com/index.php?main_page product_info&cPath 145_123_124&products_id 633 -Super Shine Silver http://www.guerrapaint.com/index.php?main_page product_info&cPath 145_99&products_id 699 -Ultramarine Blue & Quinacridone Magenta http://www.novacolorpaint.com/orderform.htm -Acrylic #65 Binder http://www.guerrapaint.com/index.php?main_page product_info&cPath 8&products_id 505 -Liquitex Pouring Medium https://www.dickblick.com/products/liquitex-pouring-medium/?gclid Cj0KCQjwrLXXBRCXARIsAIttmRMQzoSbdxU9Ysq-duAKoetDr1qmvMcPjeGjWXt0Yi3gNJinNLZoNnQaAhEoEALw_wcB

 

Coloring a Hollow Form: Woodturning with Sam Angelo
By: WYOMINGWOODTURNER
April 25, 2018 · 3,565 views

Sam shows his process for coloring a Box Elder Burl hollow form. A fairly thin wall allows for adding dye or stain to the inside of the vessel. The 'color' will wick through to the outside-following the grain and burl figure which results in a striking appearance. Please find my work on these sites: www.wyomingwoodturner.com www.samangelo.com https://www.etsy.com/shop/wyomingwoodturnercom

 

Woodturning - Building the Jig
By: Blind Woodturner
April 20, 2018 · 514 views

In this video, I build the jig and try it out for the first time! *** Proudly sponsored by Axminster Tools & Machinery. Axminster Tools & Machinery offer an extensive range of quality, value for money tools and machinery. https://www.axminster.co.uk/ *** Join me, Chris Fisher, the Blind Wood Turner, in my workshop. I started out in life as a regular guy, working in auto body repair at BMW, until one day, completely out of the blue, a rare virus (Toxoplasmosis) reared its ugly head and caused me to lose my sight in a matter of weeks. Despite the challenges of coming to terms with losing

 

2 coloured bowls hand turned from Ash
By: Wayne the Woodturner
April 15, 2018 · 1,019 views

2 10' Ash bowls using different colouring techniques

 

Polka Dots
By: Northcoast Woodturners
April 11, 2018 · 405 views

Pete Wade demonstrates how he creates woodturnings decorated with polka dots and also explains what got him into pro turning.

 

Woodturning - Experimenting with Colour
By: Blind Woodturner
April 06, 2018 · 409 views

In this video I experiment with some colour on a sycamore bowl. *** Join me, Chris Fisher, the Blind Wood Turner, in my workshop. I started out in life as a regular guy, working in auto body repair at BMW, until one day, completely out of the blue, a rare virus (Toxoplasmosis) reared its ugly head and caused me to lose my sight in a matter of weeks. Despite the challenges of coming to terms with losing my sight, I refused to give up and, after four years I decided to take up woodturning so that I could make myself a vampire stake – I’m a huge horror film fan! While every day is still a ch

 

Woodturning texture and colour on an Ash bowl
By: H F Bowern Designs - Harold Bowern
April 04, 2018 · 1,494 views

Welcome Back! In this video I am texturing and colouring an 8 ” by 2 ” Ash bowl. The process includes shaping the bottom of the bowl into a slight dome, slightly concave the rim area away from the bowl area and defining a designated area on the rim for texturing using my skew chisel. The designated rim area was defined by two grooves made with my skew chisel. The texturing was done using my large Crown Texturing tool with a spiral texturing wheel. After the texture I turn away the bowl section and sand the outside and bowl area. Then I take the bowl, still mounted to the chuck, to my

 

Hot Pink Crackle Rim
By: Stewart Furini
April 02, 2018 · 909 views

First play with Jo Sonja Crackle Medium....mixed results with some ugly splodgy bare bits! Still, others may learn from my failings...I certainly have! Uploaded in the spirit of sharing... Stickers.... Stephen's 8x6 Workshop - https://www.youtube.com/channel/UC8SLw_zYEappZL5rROwvZ1w Make it Soph - https://www.youtube.com/channel/UCy2WZ1h9A_qKMR_zVXSeTug Harold Bowern - https://www.youtube.com/channel/UCUjh0T6dqU4UQKeVlJGaR2A Materials used in this video: Jo Sonja Crackle Medium - https://www.josonjas-ukshop.co.uk/ourshop/prod_6092554-CRACKLE-MEDIUM-JO-SONJA-MEDIUM-237ml-BOTTLES.html Pebeo ac

 

The Quest For The Perfect Shine - 'Toothpaste' UpDate
By: Ron Calverley
March 31, 2018 · 525 views

Can I improve on my shine? Will toothpaste work as a polish?

 

Colouring, Gilding, burning, and texturing an off center designed bowl
By: Templeboy Turnings
March 29, 2018 · 544 views

This is the second part of the off center design bowl I turned. In this video I colour, texture, scorch, guilt and pyro the bowl to completion. I pretty much do everything that can be done to it :-) Thank you to my sponsors Yorkshire Grit and Crown hand tools. All woodturning tools used in this video were Crown hand tools :- http://www.crownhandtools.ltd.uk/ Yorkshire Grit woodturners abrasive paste :- http://yorkshire-grit.com/ The Lathe I use is a SIP Pro lathe :- http://www.sip-group.com/store/category/210/product/01940.aspx If you would like to help with the running costs of my cha

 

Preview: Epoxy resin and Cherry wood bowl
By: The Apartment Woodturner
March 25, 2018 · 35 views

Using epoxy resin slightly tinted with color and cherry wood to make a stunning bowl.

 

How to Silver foil an olive wood bowl !
By: Kostas Annikas Deftereos
March 24, 2018 · 2,403 views

in this video i try to saw you the simplest way to foil an woodturning creation ! I think is thousands ways to work with this meterial and i have make before some great crafts ! So was the time to share it with all f you !! i hope you find it interesting !!! If you like you can find me on the links bellow ! facebook : https://www.facebook.com/annikas8 instagram : https://www.instagram.com/kostas_annikas_deftereos google : https://plus.google.com/u/0/ KostasAnnikasDeftereos web : www.annikas.gr

 

GRWG Demo Metallic Embellishment
By: Grand River Wood Turners
March 19, 2018 · 44 views

Ray VanDermei demonstrates adding Metallic Looking Embellishments to woodturnings.

 

Blue Wave
By: Stewart Furini
March 17, 2018 · 1,384 views

Sorry for the wait! My latest effort, combining different texturing techniques on a platter rim and colouring with spirit stains. Not entirely happy with it, but it was fun to do....and I got to take the still images of it outsie in the snow! Please be aware that woodturning is a hazardous activity. These videos are only intended to show you what I do - they are not tutorials. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Ancient Copper Bowl
By: John Clothier
March 17, 2018 · 1,171 views

In this project I show you how I made this bowl. It is turned, coloured and textured. I will show you how I used the dremel to do the texturing then colour and finish with the dry brush technique. The main bowl is finished with Rub N Buff Antique Copper wax. Dont forget to visit my other social media: Website - https://www.johnclothier.co.uk Instagram - https://www.instagram.com/JohnClothierUK/ Facebook - https://www.facebook.com/JohnClothierUK/ Twitter - https://www.twitter.com/JohnClothierUK John Clothier is a proud member of the Makers Media Network http://makersmedianetwork.com

 

H F Bowern Designs Ash bowl resin and powders
By: H F Bowern Designs - Harold Bowern
March 17, 2018 · 685 views

Welcome Back! This piece was inspired by Martin Saban- Smith use of cogwheels in his Steampunk work and a local Ontario woodturner Dave Bell who combines wood with resins to create not only fabulous pieces of wood art, but blanks for peppermills, bottle stoppers and pens. Yes, I have started down the very slippery slop of adding resin to woodturning. ……Beam me up Scotty!! In this video I have a small bowl blank, 8 1 /4” in diameter and approx. 2 inches thick, of Ash, which I turned and cut a recess to fill with a combination of ArtResin and Pearl Ex pigment powders. This is my first e

 

#2 Release the Crackle... Paint
By: Tony Walters
March 08, 2018 · 52 views

So I decided to have a rummage through my wife's craft drawer to see what I could put on a bowl. I came across some crackle paint. My last adventure with a bowl and crackle paint was fairly unsuccessful with minimal cracking after several attempts. The crackle varnish suggests that any paint can be used, however I think the acrylic paint I used was too stretchy and so this time I used chalk paint. Chalk paint is fairly brittle so cracked very nicely but was very matte. Upon addition of a varnish topcoat the black chalk paint became very glossy so overall I'm really pleased. In these videos I

 

Parting of the Cosmic Clouds
By: woodturningwithtim1
March 07, 2018 · 4,722 views

A while back Tim turned a platter and then painted it with iridescent paints. During the project the wood that was revealed was so beautiful that it pained Tim (and thousands of viewers) to cover it with paint. Well now the Cosmic Cloud platter get returned (pun intended) to its original beauty. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

The Iroko and milliput bowl
By: The Blackwood Turner
March 05, 2018 · 162 views

In today’s episode we use milliput to make our fancy Iroko bowl even fancier.

 

gilding fail, spalted win
By: Rons Woodturning shop
March 04, 2018 · 341 views

Tried to use gold gilding, learned a little but need a little practice. Good thing the wood was awesome!

 

Using the mother-of-pearl inlay- & burning wood techniques!
By: Nick Zammeti NZ WoodTurning
March 02, 2018 · 21,803 views

MAKERS CENTRAL WEBSITE https://goo.gl/x3yVjm MY WEBSITE http://www.nzwoodturning.co.uk/ FOLLOW ME ON INSTARGRAM https://www.instagram.com/nickzammeti/?hl en EASY INLAY BY SCOTT GROVE https://www.easyinlay.com/imaginlay-products MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-g

 

rim treatment on a natural edge bowl
By: Lyle Jamieson
February 27, 2018 · 943 views

Lyle Shows how he changes the look of any vessel by using rim treatment. Please visit my web site for tools and a huge resource for turning skills and techniques. lylejamieson.com Sleeveless drum sanders can be found in Peachtree supply 3/4 x 3' drum # 177

 

two easy inlays
By: earl's small segment shop
February 26, 2018 · 1,212 views

Two easy ways to do inlay

 

Bloodbath Bowl!
By: Turning Works
February 24, 2018 · 1,003 views

This bowl looks like it was witness to a bloodbath! Watch to see how I got this effect! Chestnut cellulose sanding sealer; https://chestnutproducts.co.uk/product/cellulose-sanding-sealer Rustoleum Cardinal Red gloss and white spray gloss; https://www.rustoleum.com Facebook; www.facebook.com/turningworks Instagram; www.Instagram.com/turningworks

 

Drilling for Gold!
By: Stewart Furini
February 24, 2018 · 1,461 views

My first foray into piercing - and lots of hand sanding! A black and gold pierced textured platter rim in beech. Please be aware that woodturning is a hazardous activity. These videos are only intended to show you what I do - they are not tutorials. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Turning a inlay in a inlay in a inlay
By: Windy City Woodturners
February 22, 2018 · 1,018 views

Dick Sing, world reconized woodturner. demos precession turning to place accent rings on jar lids with various woods. He has authored multiple books on the subject along with books and videos on clocks, mirror backs. many other marketable items.

 

Ash Bowl with Bark Inclusion and Copper Inlay
By: Tony Walters
February 21, 2018 · 76 views

In this video I started turning a piece of ash with a nice looking bark inclusion. Due to the texture of the bark I decided to use some copper powder to create a unique texture

 

Clean up cambium layer with a wire wheel
By: Lyle Jamieson
February 20, 2018 · 1,168 views

When I take the bark off a natural edge, the cambium layer will remain discolored and spotty. A fine wire wheel used in a Dremel or other rotary tool makes quick your of the clean up.

 

Black Splatter Effect Bowl
By: Turning Works
February 18, 2018 · 660 views

I've tried radial splatter before but this idea was inspired by graffiti artists who use their sprays with different techniques. Please comment and let me know what you think of the new intro and style! Come and meet me and other at the YouTube stand at the NEC in Birmingham, Uk! Maker's central - May 5th/6th 2018; http://www.makerscentral.co.uk/ In this project I used; Any aerosol gloss spray paint Chestnut Cellulose sanding sealer; https://chestnutproducts.co.uk/product/cellulose-sanding-sealer/ Chestnut black Ebonising spray; https://chestnutproducts.co.uk/product/ebonising-lacquer/ Big shout out to Martin and Natalja, who have just got married - CONGRATULATIONS! All my best wishes guys!

 

Going Dotty!
By: Stewart Furini
February 17, 2018 · 1,156 views

Another idea for adding decorative colour to platter rims....I use metal discs for this one, but other things could be used - nuts, bolts, lentils, grains of rice, kidney beans.....I'm sure I'll try it out with nuts as the hexagon patterning it'll make is very appealing. The colours are Intrinsic Colours from Martin Saban-Smith. Please be aware that woodturning is a hazardous activity. These videos are only intended to show you what I do - they are not tutorials. When spraying, a respirator should be worn at all times. Stiles and Bates - https://www.stilesandbates.co.uk/product.php/section/6260/sn/BEEBB_MST Intrinsic colours - http://www.msabansmith.com/product-category/intrinsic-colours/ Cut 'n' Polish - https://chestnutproducts.co.uk/product/cutnpolish/ Airbrush Cleaner - https://www.amazon.co.uk/gp/product/B01JRON3UI/ref oh_aui_detailpage_o07_s00?ie UTF8&psc 1 - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

One Year Update - Maintaining Wood Colors
By: Gord Rock
February 14, 2018 · 978 views

One year since releasing the video on using sunscreen to maintain the color of Padauk. Here are the results in a very quick video. Link to original video: https://youtu.be/6FwFajgsosY

 

Wood turning - Lets practice Spiralling texturing tool together!
By: CraftWithAfshin
January 30, 2018 · 580 views

---Please also check out these wonderful wood turners--- Mike Waldt : https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w RickTurns : https://www.youtube.com/channel/UCghK0Pjzr5YaZK2SlC2Dftw Carl Jacobson : https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Stuart Arts : https://www.youtube.com/channel/UCrux70rjZflDA6-ypvaH8DQ Heath Knuckles:https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ Аleksey Bek : https://www.youtube.com/channel/UCz-hSlcLGBOfzw9RKs7m_5g M. Saban Smith Woodturning: https://www.youtube.com/channel/UCpHZv5j6vdMmFjXHDBxPLxw Andy Phillip : https://ww

 

Paint Brush vs Power Tool
By: Stewart Furini
January 28, 2018 · 1,360 views

The gulf between my vision and talent was very evident with this effort! However, I got to try out a different idea and ended up with something I was reasonably pleased with! Hope you enjoy it! Please be aware that woodturning is a hazardous activity. These videos are only intended to show you what I do - they are not tutorials. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Comb Over plus 1K Giveaway
By: Stewart Furini
January 21, 2018 · 1,508 views

How not to use a comb! And as a thank you for reaching a 1000 subscribers, it's a giveaway! Watch to the end to see what you win and how to enter. Custom Patches from https://www.custompatch.co.uk/ Please be aware that woodturning is a hazardous activity. These videos are only intended to show you what I do - they are not tutorials. I - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

6 pack of mardi gras bowls
By: Rons Woodturning shop
January 20, 2018 · 369 views

Made one and a customer wanted 6! Got busy and cranked them out. These were cypress and poplar with pyrography and color using permanent markers finished with poly. Lots of fun but tedious!

 

Ancient Platter
By: Maple-Crossing Woodworks
January 20, 2018 · 340 views

A simple cherry platter finished with the Modern Masters Metal Effects copper paint. This was the first larger project I got to finish on my new Powermatic lathe. I hope you enjoy!

 

Coloring A Handmade Wooden Hollow Form With Alcohol Inks
By: DeadTreeWoodWorks
January 17, 2018 · 1,288 views

In this video I paint an ash wood hollow form with alcohol inks. Link To Finished Piece - https://www.etsy.com/listing/587406361/ My Etsy Shop - https://www.etsy.com/shop/deadtreewoodworks Links To Inks/Finish - https://www.woodturnerscatalog.com/p/148/6187/Artisan-Premium-Coloring-Dye?0&term artisan dye http://www.joann.com/alcohol-ink-blending-solution-2-oz/8591356.html#prefn1 prod_type&prefn2 brand&prefv1 Product&prefv2 Tim%20Holtz&start 1 http://www.joann.com/tim-holtz-adirondack-alcohol-ink-mixative/prd35645.html http://www.joann.com/tim-holtz-adirondack-alcohol-ink/prd53032.html https://www.homedepot.com/p/Rust-Oleum-Painter-s-Touch-2X-12-oz-Gloss-Clear-General-Purpose-Spray-Paint-249117/100670438

 

Masked Angles and Colours
By: Stewart Furini
January 14, 2018 · 1,440 views

A return to colour - hurrah! Mucking about with masking tape, angled shapes and colour. Chestnut Spirit Stains applied with an airbrush. Like the last video, this is just a bit of playing around with ideas...this is on the back of a blank and it'll be turned off eventually... Please be aware that woodturning is a hazardous activity. These videos are only intended to show you what I do - they are not tutorials. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Mesh Stencil Experiment
By: Stewart Furini
January 11, 2018 · 1,343 views

Not too sure about this one...end result wasn't really what I was aiming for, but the process is certainly something I'll continue to work on. Comments always welcome. Feel free to share and subscribe! - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Gold Leaf and Patterned Bowl
By: John Clothier
January 06, 2018 · 2,021 views

In this project video I show you how I made a bowl from pear. This bowl is gold leafed on the outside and a patina/pattern applied using Intrinsic colour from Hampshire Sheen. The inside is then finished with Yorkshire Grit and Hampshire Sheen high gloss wax. MY WEBSITE https://www.johnclothier.co.uk FOLLOW ME ON FACEBOOK https://www.facebook.com/JohnClothierUK/ FOLLOW ME ON INSTAGRAM https://www.instagram.com/JohnClothierUK/ FOLLOW ME ON PINTEREST http://pinterest.com/JohnClothierUK --------------------------------------------------------------------------------- MY EQUIPMENT --------

 

3D Acrylic Paint Pouring On Wooden Bowls
By: DeadTreeWoodWorks
January 06, 2018 · 13,436 views

In this video I use some 3D pouring methods with acrylic paints and floetrol to paint some flame box elder wood bowls that I turned earlier. Finished Bowls - https://www.etsy.com/listing/587207981/ https://www.etsy.com/listing/587210925/ My Etsy Shop - https://www.etsy.com/shop/deadtreewoodworks Here are some links to a few of the products I used to paint the bowls. Floetrol - https://www.amazon.com/FLOOD-PPG-FLD6-04-Floetrol-Additive/dp/B000C029PM/ref sr_1_1?ie UTF8&qid 1515295653&sr 8-1&keywords floetrol Pearlecent Medium - https://www.amazon.com/Liquitex-Professional-Iridescent-Effects-Medium/dp/B001US4S68/ref sr_1_1?s arts-crafts&ie UTF8&qid 1515295741&sr 1-1&keywords pearlescent medium

 

Cypress Mardi Gras
By: Rons Woodturning shop
January 05, 2018 · 235 views

Had fun with a piece of cypress and some color. Mardi Gras mask with pyrography and dye.

 

Textured Walnut Bowl Last Turning Of 2017 Sorby Texture Tool In Use
By: Erik Anderson
January 01, 2018 · 2,217 views

This is a followup to my last walnut bowl platter, more video of the texturing and turning process.

 

Crackle Glaze Effect
By: Stewart Furini
January 01, 2018 · 3,640 views

A 12 inch Ash platter with a crackle glaze effect rim. Pyrography and Chestnut Products Spirit Stains. Sealed and lacquered. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Red Rim with Gold and Black
By: Stewart Furini
December 23, 2017 · 1,900 views

Back to a larger bowl - coloured with Intrinsic Colours and finished with Hycote lacquer and Chestnut Products Microcrystalline Wax. Thank you to everyone who has subscribed and commented on my videos this year. Have a great New Year! Links Mike Waldt: https://www.youtube.com/user/TheCymruBoy/videos Chestnut Products: https://chestnutproducts.co.uk/ Martin Saban-Smith: http://www.msabansmith.com/ Wayne Clasper: https://www.youtube.com/user/clas1rw Dave Capper Sandon: https://www.youtube.com/channel/UCHoefXGGzyZvtIsj0t_-9wg Roper Woodturning: https://roperwoodturning.com/ - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Metallic Effect Ash Bowl
By: Stewart Furini
December 17, 2017 · 5,911 views

A small snack or sweet bowl coloured with Martin Saban-Smith's Intrinsic Colours and metallic silver acrylic paint. Finished with Chestnut acrylic sanding sealer and gloss lacquer. https://www.youtube.com/user/workingimage/featured https://www.instagram.com/msabansmith/ https://chestnutproducts.co.uk/ https://www.youtube.com/user/ChestnutProducts - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Wood turning - Complete step by step guide on brass powder inlay bowl
By: CraftWithAfshin
December 12, 2017 · 3,845 views

Hey guys as you know recently i did a aluminum powder inlay into a engraved bowl but this time i decided to use a blank that had hundreds of worm hole, I wanted to prove that woods like this can still be used and we should always try and find a way to preserve them and in doing so we can come up with exciting new ways to keep wood turning fun :) Thank you all wonderful people for watching!

 

Molly Winton Design and Embellishment Part 1
By: Olympic Peninsula Woodturners
December 11, 2017 · 289 views

Molly Winton demonstrated the design concepts she uses to create nationally recognized artistic woodturning during OPCAAW's October 2017 meeting. Part 1 of 3.

 

Molly Winton Design and Embellishment Part 2
By: Olympic Peninsula Woodturners
December 11, 2017 · 135 views

Molly Winton demonstrated the design concepts she uses to create nationally recognized artistic woodturning during OPCAAW's October 2017 meeting. Part 2 of 3.

 

Molly Winton Design and Embellishment, Part 3
By: Olympic Peninsula Woodturners
December 11, 2017 · 127 views

Molly Winton demonstrated the design concepts she uses to create nationally recognized artistic woodturning during OPCAAW's October 2017 meeting. Part 3 of 3.

 

Shades of Grey
By: Stewart Furini
December 10, 2017 · 711 views

After a comment asking for a black and white rim, I've been mulling over some ideas. This one is more greys, though. White spirit stain doesn't stain light wood white - it just makes other stains lighter. There might be a black and white painted rim some other time. But for now, here's what I've managed with spirt stains. Chestnut Products - spirit stains, cut n polish, acrylic sanding sealer. Hycote car lacquer. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Faux Lapis Lazuli Effect
By: Stewart Furini
December 06, 2017 · 1,947 views

Another tealight holder...black, blue and gold this time...sort of like lapis lazuli...plenty of mistakes and retries on this one! Too much gold paint, bad texturing idea, but got there in the end! Chestnut spirit stains, acrylic paint and gloss lacquer finished with Chestnut burnishing cream. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Gradient Texture and Dabbing
By: Stewart Furini
November 23, 2017 · 1,347 views

A combination of techniques - texturing, airbrushing a gradient, then dabbing on contrasting, or perhaps clashing (!) colours. Finished with Chestnut Acrylic Sanding Sealer. Filmed with webcams using OBS software. Chestnut Products - spirit stains, sealer and cut 'n' polish. https://chestnutproducts.co.uk/ Stickers - Annikas https://www.youtube.com/channel/UCYGlGOiYoojmrOEF6BK8lUw OBS https://obsproject.com/ - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Burr Elm Platter
By: Stewart Furini
November 18, 2017 · 1,051 views

Another video without any colouring! Well, without any colouring I've added...as this piece of wood is just gorgeous as it is. It's a piece of elm burr from Jon Dempsey - thanks, Jon! The challenge was the piece was quite thin to begin with and had a rather large crack running through it. Sanded to 400 grit and finished with several coats of Chestnut Finishing Oil. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Blue Stripes
By: Stewart Furini
November 11, 2017 · 423 views

Trying out my new mini-compressor and airbrushes...some practice with my airbrush technique still needed! However, the compressor was great... - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Hot Melt Glue Stencil - Platter Rim
By: Stewart Furini
November 05, 2017 · 1,876 views

Multiple applications of hot melt glue added between spirit stains. Yellow, orange, red and black Chestnut Spirit Stains, Chestnut Acrylic Sanding Sealer, Chestnut Acrylic Gloss Lacquer. Colour applied with an airbrush. Sticker swap - Mike Waldt! https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Secondhand Bowl
By: RickTurns
October 31, 2017 · 4,963 views

In this video, I'm starting with a rough-turned bowl that was given to me by a friend. I turn it to shape, dye the inside, and then dye two decorative stripes on the outside. The music during the close of the video, Happy Little Elves by Audionautix, is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Multi-coloured Pebbles...or Blobs!
By: Stewart Furini
October 29, 2017 · 2,049 views

Experimenting with masking and airbrushing. Blutack, Chestnut spirit stains and a piece of ash...oh, and also looking at the effect of sealing the wood before applying the stain... Sticker swaps with: John Clothier - The Woodworking Shed https://www.youtube.com/channel/UC2hWlsf15z-7-smBhGdZvNg Andrew Whale - Made in Yorkshire https://www.youtube.com/user/tiddlerfromtad/feed Ed Oliver - Olivers Woodturning https://www.youtube.com/channel/UC9JcDpYqFEYozU99o_4PodQ - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Ebonizing a Laminated Oak Bowl
By: Bryce Roebel
October 22, 2017 · 585 views

Applying a vinegar and steel wool solution to the outside of a turned bowl. The vinegar solution reacts with the tannins in the oak and turns black.

 

My little experiment with Staining bowl! Beautiful fiery sunset color achieved!
By: CraftWithAfshin
October 17, 2017 · 800 views

Woodturning - My way Christian https://www.youtube.com/user/paracordbraider?&ab_channel Woodturning-MyWay I have setup a patreon account for those that wish to directly support me it is obviously not necessary, every project will also be uploaded here for free :) https://www.patreon.com/TurnWithAfshin

 

Naked Turner Maple Textured Bowl
By: Erik Anderson
October 15, 2017 · 1,888 views

I turn a maple textured bowl using Robert Sorby Texturing tool.

 

Maple Bowl & OSMO Coloring Test
By: Gord Rock
October 14, 2017 · 1,844 views

Experimenting with OSMO for coloring a turning. OSMO information at: www.osmo.com

 

Blue Whirlpool Spiral
By: Stewart Furini
October 13, 2017 · 562 views

A variation of the spiralling technique from my last video, trying to build up different colours in the texture by texturing the blank several times. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Black Spiral
By: Stewart Furini
October 06, 2017 · 2,657 views

Textured and coloured platter rim - texture made with a Robert Sorby texturing tool - Chestnut spirit stains - Chestnut sanding sealer, lacquer and cut 'n' polish. This one was partly inspired by a platter made by Ed Oliver - thanks, Ed! Ed used Golden Artist Colours on his platter, which he sells in his shop, not Jo Sonya colours as I say in the video. Like, share and subscribe! Comments always welcome. https://chestnutproducts.co.uk/ I use Chestnut's spirit stains, acrylic sanding sealer, Cut 'n' Polish abrasive wax, and abrasive pads. I buy their supplies from a variety of online retailers. I've used Axminster and Stiles and Bates. http://www.axminster.co.uk/ https://www.stilesandbates.co.uk Olivers Woodturning also supply their products https://www.oliverswoodturning.co.uk/ The kitchen roll is from Poundland... - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Woodturning Cosmic Cloud Painting
By: Al Dunlop
October 04, 2017 · 393 views

In this episode of Turn Time with Al we Cosmic Cloud paint a wood turned coffee cup. See howto add a bit of bling to your wood turning & coffee cups.

 

Decorative Additions
By: Lee Burkholder
October 02, 2017 · 571 views

Cumberland Valley Wood Turners, turning, lathe, wood turning, decorative turning, wood working, crafts

 

Blues and Yellow Platter
By: Stewart Furini
October 01, 2017 · 704 views

Another full colour platter video, but a longer, more detailed video this time, hopefully covering most of the questions I've been asked by several people. There is a list of supplies I used in this video below. Feel free to leave comments, to click the like button and to subscribe! https://chestnutproducts.co.uk/ I use Chestnut's spirit stains, acrylic sanding sealer, Cut 'n' Polish abrasive wax, and abrasive pads. I buy their supplies from a variety of online retailers. I've used Axminster and Stiles and Bates. http://www.axminster.co.uk/ https://www.stilesandbates.co.uk Olivers Woodturnin

 

E96 Pouring Colours and a Day with George Foweraker
By: M. Saban Smith Woodturning
September 26, 2017 · 3,277 views

Monday and Tuesday have been great, with the latter outshining the former by far. Monday was mostly consumed with pouring colour bottles and then admin (yawn!), but today was spent with George Foweraker RPT and a load of colour experimentation! Had a thoroughly enjoyable day....so thank you for coming today, and for your company, George. I look forward to seeing how you continue to use the colours. ********************************** Visit my website for Hampshire Sheen, Intrinsic Colours, Witty Turner's Clothing and Gifts, Hints and Tips: http://www.msabansmith.com ************************

 

Simple Blue Beech Grain
By: Stewart Furini
September 26, 2017 · 1,324 views

The simplest way to add colour - several coats of spirit stain wiped on with paper towels, sanding between coats, and then sealing and finishing with lacquer and microcrystalline wax. No special equipment needed! No frills! No artistic skills necessary! - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

#31 Basket Weave Illusion Effect
By: Andrew Whale
September 22, 2017 · 29,962 views

The Basket Weave Illusion Effect Hi This is my first attempt at trying out the basket weave illusion effect - applied to a small platter. As a regular reader of Woodturning magazine, I was intrigued and inspired to have a go at this after seeing an article featuring Michael Alguire, who uses this technique. This is by far the most complex and time-consuming project I have undertaken so far. I am really pleased I gave it a try and I am extremely happy with the result. I will definitely apply this technique on other projects but I am not sure I would undertake such a lengthy project again! M

 

Multi coloured Texture Experiment
By: Stewart Furini
September 22, 2017 · 565 views

An experimental piece looking at adding multiple layers of texture and colour. Finish not as good as I would like - I need to sand between the layers of texture, without disturbing the previous layers of colour! - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

My First Video For MAKE (behind the scenes)
By: Le PicBois
September 21, 2017 · 1,806 views

This video is a behind the scenes of the first video I made for MAKE: https://youtu.be/cefHK9gtpCE • MAKE Channel: https://www.youtube.com/user/makemagazine • My Camera Guy: https://www.youtube.com/user/JGABPOTHIER ---------------------------------------------------------------------- Support me on Patreon: https://www.patreon.com/lepicbois • Website: http://lepicbois.net/ • YouTube: https://www.youtube.com/lepicbois • Facebook: https://www.facebook.com/AtelierLePicBois • Instagram: http://instagram.com/atelierlepicbois • Twitter: https://twitter.com/atelierpicbois -------------------------

 

Sycamore, Milliput and Colour
By: Jim Overton - Jimson's Stuff
September 16, 2017 · 5,662 views

In this video I am turning a deep enclosed bowl out of sycamore and embellishing it with a Milliput inlay and a coloured design.I am using Chestnut Products Spirit stain and their Aerosol cellulose sanding sealer for the first time. I have long been a fan of their cellulose sanding sealer in liquid form and other fine finishes they produce. Milliput supplied by Milliput https://www.milliput.com/ Yorkshire Grit supplied by Yorkshire Grit http://yorkshire-grit.com/ Record Power http://www.recordpower.co.uk/ Record Power Woodworking live at the D and M Toolshow, Kempton Park 6-8th October 2017

 

Rusty Iron Cauldron
By: John Clothier
September 10, 2017 · 454 views

In this project video I created a small cauldron from beech. It was then painted with reactive paints to make it look like an old rusty vessel. I then contrasted this with gold leaf on the inside.

 

Orange Splodge and Splatter Platter
By: Stewart Furini
September 10, 2017 · 423 views

A full colour platter this time! Chestnut Spirit Stains put on with an airbrush. The advantage of colouring the whole platter is that I don't need to cut out the centre after the rim has been done. It also means I can make a larger usable area inside the platter. The footage of the decoration comes from a demo I did at West Sussex Woodturners. Bonus footage of my camera and sound set-up at the end too! West Sussex Woodturners: http://www.westsussexwoodturners.co.uk/ Jimson's Stuff: https://www.youtube.com/channel/UC6h82LH3PtdiSHaj_7f09Fg NZWoodturning: https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Relic Shield With Reactive Paints
By: John Clothier
September 03, 2017 · 333 views

In this project I made a Relic Shield using Reactive paints. My original idea didn't work out as I would of liked so I changed it as I went along. Reactive Paints available from http://www.msabansmith.com/shop/embellishments/verday-metal-reactive-paints/ Martin's Ancient Shield https://www.youtube.com/watch?v osUv7DHV98s&t 1303s

 

Fractal Burning & Inca Gold
By: dc9apu
August 25, 2017 · 30,020 views

This video is about Fractal Burning & Inca Gold

 

How to: Home made Tannin concentrate for ebonising with Vinegar and Wire Wool
By: Nathan Cumming
August 24, 2017 · 1,416 views

In this video I explain the process of ebonising with wire wool, how using additional tannin can help with that and how to make your own tannin concentrate cheaply. This is to follow on from my video series where I turn and ebonies a Beech and Sapele Urn. First, I explain about how to make your own Iron Acetate solution, (wire wool dissolved in vinegar) and demonstrate its effect on woods already high in tannin. The species I use to demonstrate is Oak. Next, I reveal the secret ingredient that produces my tannin concentrate and show my method of producing it. The process involves boiling

 

Woodturning - Centrifugal Painting
By: Al Dunlop
August 21, 2017 · 1,744 views

A short video explaining how I created my centrifugal painted sheoak bowl.

 

Decorating a Maple Bowl with Wood Burning
By: Le PicBois
August 20, 2017 · 3,380 views

I made some pyrography on a bowl for the first time. I will try to paufinate this technique soon! :) See the Part 1 of this build here: https://youtu.be/NXe7LZ82cco Pyrography Kit Courtesy of GoChange: • http://www.gochanges.com/ • Buy this kit here: http://amzn.to/2fM5wrF _____________________________________________ Music: Land on the Golden Gate by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://chriszabriskie.com/stuntisland/ Artist: http://chriszabriskie.com/ _________________________________________

 

Cactus Juice Dyeing Baltic Birch
By: dc9apu
August 19, 2017 · 1,857 views

This video is about Dyeing baltic birch

 

Wide (?) Rim Elm Bowl with Colored Inserts
By: Gord Rock
August 10, 2017 · 1,668 views

A bowl or candy dish with slots cut across the face to add inserts of contrasting wood species.

 

Jerry's filler for larger voids
By: Nubsnstubs
August 10, 2017 · 122 views

I'm just pointing out how I use branches to fill in larger voids instead of just putting in coffee grounds, wood chips, real and fake turquoise or all the other fillers on the market. In this case, the tree this blank came from was alive last week, turned and cored 4 days later. When when it has dried enough in 3 months, I will take it out of the bag and go ahead and do what I was trying to explain in this video. Mainly, glue the branch or branches in place and look for cracks and glue them with powdered fillers and CA.... Jerry www.woodturnerstools.com

 

Rainbow
By: OzWorkshop
August 09, 2017 · 317 views

Here is my new project.. Resin rainbow ring.

 

Cactus Juice Go Big
By: dc9apu
August 08, 2017 · 761 views

This video is about Cactus Juice Go Big

 

Cactus Juice Rotten Wood Lamp
By: dc9apu
August 08, 2017 · 300 views

This video is about Cactus Juice Rotten Wood Lamp

 

Alumilite & Pine Knot
By: dc9apu
August 07, 2017 · 469 views

This video is about Alumilite & Pine Knot Cactus Sam E-mail: Chollawoods@icloud.com Cactus Sam eBay page: eBay :505farm

 

Fractal Burning Acrylic Sheet
By: dc9apu
August 07, 2017 · 3,109 views

This video is about Fractal Burning Acrylic Sheet Lichtenberg Mirror Image https://www.youtube.com/watch?v 8Kt2LKoEFV8

 

Blue Sycamore Bowl
By: John Clothier
August 06, 2017 · 1,406 views

In this project video I go through the complete process of turning a bowl from sycamore then coloured the rim blue.

 

My Piercing Setup
By: Steve Krumanaker
August 05, 2017 · 575 views

The parts I bought for piercing thin turnings. On Ebay NSK Pana Max 4 hole dental hand piece, about 10-15 dollars Inline air regulator, about 15 dollars. At the local Hardware 6' by 3/16' I.D. plastic line 1/8' X 1/8' hose barb. 3/8' X 1/8' brass bushing, about 7 dollars total. Online http://bursforcarving.com/ Air compressor with tank and necessary connections, Minimum 2cfm@40psi or capacity.

 

woodturning # 75 Eye of Jupiter bowl
By: Woodslee Summercraft
August 04, 2017 · 3,263 views

this maple bowl is turned with a crotch feature that has an inclusion that I filled with glow in the dark epoxy. the natural figure in the wood reminds me of the eye of Jupiter I hope you like it.

 

Time for colour
By: Blind Woodturner
August 02, 2017 · 249 views

In this part of the project I add some ebonizing liquid and an American Walnut stain.Join me tomorrow at 1 PM BST to watch me hollow out the Lutherie hoop.

 

Beautiful Elm burr bowl with Garnet gems inlay into clear resin
By: CraftWithAfshin
August 02, 2017 · 2,070 views

Hey guys first of all I'd like to apologise I haven't been able to upload for past 2 weeks I've been very busy real life I just didn't have time to film. but today I got longer video than usual we going to turn bowl that has a inlay of gems! its my first time doing this so its good experience for me as well. I have setup a patreon account for those that wish to directly support me it is obviously not necessary since every project will also be uploaded here for free :) https://www.patreon.com/TurnWithAfshin

 

Woodturning at 54a #123. Old bowl,new colour
By: Keith Barrow
July 31, 2017 · 2,537 views

Here I take the iridescent bowl I did last year,and change the colour on it,using Intrinsic colours. For seggys and centre finder,please go to: http://www.woodturningat54a.com

 

Nigel Howe - Surface Embellishments
By: Ocean Woodturners
July 29, 2017 · 622 views

Nigel Howe gives an overview of surface embellishment techniques at the Ocean Woodturners July 2017 meeting. For more information visit http://www.oceanwoodturners.com

 

Coloured Glass Effect Rim
By: Stewart Furini
July 25, 2017 · 757 views

A new technique inspired by a photograph of a piece of coloured glass work - a combination of a rough radial pattern, splodging and splattering. The sealer used on the first example was applied a bit too soon and washed out a bit of the colour so it would have been better to have waited a while before applying it. Please feel free to like, share and comment! - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Spalted maple with yellow dye
By: Rons Woodturning shop
July 23, 2017 · 892 views

Having fun using this alcohol wood dye. This one is spalted maple dyed yellow with and orange highlighted rim. Hope you enjoy!

 

The Making of 'Goldie'
By: OzWorkshop
July 22, 2017 · 1,116 views

another decorated platter... inspiration from Stewart Furini Check out his channel https://www.youtube.com/channel/UCImOAiKvAcBdt8O02CdIpXg

 

Blue Etched Rim
By: Stewart Furini
July 08, 2017 · 560 views

A triple etched rim - with a large oops moment when the main spraying wasn't filmed! This was an experiment with colouring the etched areas with different colours - I'll definitely be doing some more of this in future... - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Spanish cedar platter with wood dye and pyrography
By: Rons Woodturning shop
July 07, 2017 · 54 views

 

Holly and Milliput Inlay Bowl
By: Jim Overton - Jimson's Stuff
July 06, 2017 · 14,772 views

In this video I create a bowl using a holly branch and Milliput epoxy putty as an inlay. You can now follow me on Instagram www.instagram.com/jimsonsstuff/ Milliput supplied by Milliput https://www.milliput.com/ Yorkshire Grit http://yorkshire-grit.com/ UK and Ireland woodturning symposium UKIWS http://www.ukiws.co.uk/ Makers Central www.makerscentral.co.uk My name is Jim Overton, welcome to my channel. Thanks for watching. Please like, share and subscribe. Disclaimer Woodturning is potentially dangerous! My videos are designed to give viewers creative ideas. The way I work is not necessarily the best or safest way to work! Your safety is your own responsibility not mine. Please follow all safety procedures and wear personal protective equipment. Wear a visor and a respirator dust mask at all times. Be safe, be creative and enjoy your turning.

 

Coloring a Box Elder Pot with Cheryle: the wyomingwoodturner
By: WYOMINGWOODTURNER
July 05, 2017 · 4,026 views

This may be the most detailed video showing the process of coloring a vessel from the inside. There is a great deal of information in this video---including clips of spraying lacquer. Bonus footage of Cheryle begins at the 35 minute mark. Link to Cheryle's 'leaf' video: https://www.youtube.com/watch?v A8d3RCyIV7c&t 467s My Lacquer and sealer at stewmac.com

 

Tiger Textured Platter
By: Stewart Furini
July 02, 2017 · 1,208 views

http://www.stewartfuriniwoodturning.co.uk Another idea for decorating a platter rim - I went with yellow, orange, red and black...hence Tiger Texture! A Proxxon long-neck grinder, Chestnut Spirit Stains, acrylic paint and acrylic lacquer. Check out my website and blog. Comments, likes and subscription always welcome! Thanks. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Hot Red Etched Rim
By: Stewart Furini
June 23, 2017 · 832 views

A textured and coloured 12 inch beech platter. Texture applied with a Proxxon long-neck grinder. Chestnut spirit stains applied with an airbrush. Sealed and finished with Chestnut Acrylic Gloss Lacquer. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Midnight Black and Blue
By: Stewart Furini
June 20, 2017 · 1,424 views

Wipe on spirit stains for a background for adding centrifugal effect with metallic silver, black and acrylic paint. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Blue Sycamore Platter
By: Stewart Furini
June 20, 2017 · 477 views

Combining use of stencil and free-hand airbrushing with Chestnut spirit stains. A base coat of white stain was put down, then a light covering of blue, followed by a piece of router mat used as a stencil and then free-hand work. Finished with acrylic lacquer and microcrystalline wax. Comments always welcome! - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

ResinPlatter - Deep Dive
By: OzWorkshop
June 16, 2017 · 440 views

A new platter . 'Deep Dive'. The resin gives depth to the sea like paint

 

Woodturning : How to Epoxy a Bowl
By: SG Art Turning
June 12, 2017 · 36,638 views

Patreon : https://www.patreon.com/sgartturning Email : simgadoury@gmail.com You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg Web Site : https://sg-art-turning.com Facebook : https://www.facebook.com/SGTurning

 

Aerosol & Marker Dye Demonstration
By: The Studios of Bradley R.M. Woodturning
June 12, 2017 · 166 views

Applying Chroma-Craft aerosol dye, dye marker and clear lacquer during a live seminar at The Woodworking Shows 2017. Now available at The Studios Store. https://ecom.bradleyrm.com/product-category/chroma-craft

 

Sun Moon Tiger
By: Stewart Furini
June 12, 2017 · 534 views

A combination of techniques on a twelve inch beech platter - spirit stains, acrylic paint and acrylic lacquer... - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Lines and Circles
By: Stewart Furini
June 11, 2017 · 622 views

Using spirit stains with an airbrush and templates. I think the finish needs some more work - it would be better to have some more contrast with the colours...I'm leaving it for a while before I turn the bowl out. Any suggestions for improvements? - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Dyed, Diet Bowl - aka Experimental Whoops
By: As Wood Turns
June 02, 2017 · 2,538 views

http://www.AsWoodTurns.com With all the ideas from the Utah Woodturning Symposium, it's time to implement some of them with this project. The wood is the remaining pine slab from a previous project. However, it has a crack where the rim would be and several knots. Why not try to fill the cracks with lead free solder? And, why not try some color blending to liven up the top sided. And why not an oversized rim to emphasize the color. Well, my soldering abilities were sorely tested by the cracks. But the color turned out nicely despite having to waste off that beautiful wide rim. The biggest

 

Splatter
By: OzWorkshop
May 29, 2017 · 2,500 views

A platter decorated using the flow paint method.

 

Fire Edge - Red Gum and Resin Bowl
By: TGL Woodturning
May 28, 2017 · 209 views

A short timelapse showing off the process of turning this beautiful Red Gum and Resin bowl. This was a mother's day gift for my mum and I'm really happy with the result. The resin used was Diggers brand casting and embedding resin, colouring achieved with using a small amount of model paint. Follow me on Facebook https://www.facebook.com/TGLWoodturning/ Support me on Patreon https://www.patreon.com/TGL Music: 'Cool Intro' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

drechseln einer Schale mit Milliput Verzierung, woodturning a Bowl with Milliput Inlay DIY
By: Woodturning F-Z
May 26, 2017 · 2,021 views

drechseln einer Pappel Schüssel die ich mit Milliput Epoxidharzkit verziert habe gibts Hier https://www.amazon.de/Milliput-Epoxy-Putty-superfein-wei%C3%9F/dp/B002CNEWAM/ref sr_1_2?ie UTF8&qid 1495827537&sr 8-2&keywords milliput verwendet wurde schwarz yellow grey und weiß woodturning a Bowl with decoration from Milliput in black,yellow grey, and white

 

#23 Pewter Rimmed Spalted Beech Bowl
By: Andrew Whale
May 21, 2017 · 1,708 views

Hi This is my first attempt at turning a pewter rimmed bowl. I was inspired to have a go at this after watching a video by Bram the Wadesmill Woodturner. He created a great looking pewter rimmed bowl. His YouTube channel is: https://www.youtube.com/channel/UCEHcSv7-eoRVkyyksXsnrBA My video focusses on the method and making of the pewter rim, rather that the turning of the bowl. During the making of the pewter rim I suffered a really bad catch. I then used a glove on my left hand which, in hindsight, wasn't good practice. As such, please do not copy me. I hope you like the bowl and find this

 

MILLIPUT RESTORATION PROJECT!
By: Nick Zammeti NZ WoodTurning
May 19, 2017 · 20,231 views

Here I'm restoring a little bowl using Milliput Putty Resin. UKIWS http://www.ukiws.co.uk/ AAW Woodturning (Kansas City) http://www.woodturner.org/?page 2017KC MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw MY NZ WOODTURNING EMBLEMS (round brass logo makers mark) http://www.williams-eng.co.uk/ THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RE

 

Autumn Blossom
By: Stewart Furini
May 19, 2017 · 1,456 views

Aribrushing with Chestnut spirit stains through paper packaging and router mat. The finished effect reminded me of blossom petals, but in autumnal colours....hence the name! Thanks to all of you who have subscribed and commented on my videos - especial thanks to Mike Waldt whose shout-out a week ago has increased my views and subscribers dramatically! I'd love to know your thoughts about this technique. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Blue Green Bubble Rim
By: Stewart Furini
May 14, 2017 · 768 views

A bubble effect texture using spirit stains with an airbrush in blue and green. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Phantom Baskets Demo
By: Hiawatha Woodturning Club
May 12, 2017 · 377 views

Jim Rutledge shows how he does his Phantom baskets. A Hiawatha Woodturning Club live demonstration. Real woodturners, not actors were used in this video.

 

Carved Milliput Pattern and Hope Carving Jig Review
By: Jim Overton - Jimson's Stuff
May 07, 2017 · 8,432 views

In this video I show how I created a carved Milliput inlay pattern in a shallow bowl or dish that I turned from a sycamore blank. I also show my review of the Hope Carving Jig that I bought from Olivers Woodturning. Originally this video was also planned to be about colouring Millliput but after making the video I discovered that the pigment I used was toxic. I have deleted those scenes from the video and request that people do not ask me any more details on the process or materials that I used. I do not want anyone being misled and putting themselves in danger. This pattern would have worke

 

Blue Sea Bowl
By: Stewart Furini
May 04, 2017 · 3,387 views

A more in depth, longer video than usual, showing how I used spirit stains to decorate a beech platter rim. The stain is applied with kitchen roll and also by airbrush. As always, comments welcome! Check out my website http://www.stewartfuriniwoodturning.co.uk - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

#21 Enclosed Bowl with Aluminium & Acrylic Inlay
By: Andrew Whale
May 01, 2017 · 714 views

Hi This is my first attempt at making a bowl with an Aluminium & Acrylic inlay. Watching Jim Overton's YouTube channel inspired me to have a go. Check out Jim's channel (Jimson's Stuff) at: https://www.youtube.com/channel/UC6h82LH3PtdiSHaj_7f09Fg The aluminium material was created by mixing epoxy resin with aluminium powder. I encountered numerous air holes in the aluminium when sanding, and it took ages to fill and re-sand. I will think twice before using this method again and any advice on alternative methods would be welcome. For the coloured pattern I used 3mm opaque acrylic. Next time I w

 

Red and Gold Centrifuge
By: Stewart Furini
April 30, 2017 · 2,944 views

Beech platter with decorated rim - acrylic paints and metallic paints, acrylic lacquer and wax finish. Heavily edited and speeded up in parts. Comments always welcome. Check out http://www.stewartfuriniwoodturning.co.uk - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Hydro Dip painting
By: Tommy Akridge Designs
April 27, 2017 · 5,126 views

This video is about showing how to do hydro dip painting. My name is Tommy Akridge, I am a small town wood turner working on wooden bowls, segmented bowls and vases. some of my work could be considered art and also consist of Urns, vases and boxes. I have been turning for just a few years and I have found that I love it. I get lost in my work and that helps me cope with my the day to day work life. Showing my work on YOUTUBE has changed the way I turn, I enjoy showing others what i'm doing and maybe them be better turners. Thank You For Watching Tommy

 

Pink Black Centrifuge
By: Stewart Furini
April 25, 2017 · 6,695 views

A new technique for me - using acrylic paints and centrifugal force to decorate a sycamore platter rim. The colours are lovely and vibrant and the black inner and outer rim frame the platter nicely. Comments welcome! http://www.stewartfuriniwoodturning.co.uk - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Robert Sorby Spiralling & Texturing Set
By: Mike Waldt
April 16, 2017 · 10,983 views

An introduction to the basic set up and use of the Robert Sorby Texturing and Spiralling Set. Olivers Woodturning: https://www.oliverswoodturning.co.uk/ UKIWS: http://www.ukiws.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk

 

Hydro Dip Painting wood turned Platter
By: Tommy Akridge Designs
April 14, 2017 · 9,221 views

D-Way Tools www.d-waytools.com Smooth Sailing (with Guitar) by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ My name is Tommy Akridge, I am a small town wood turner working on wooden bowls, segmented bowls and vases. some of my work could be considered art and also consist of Urns, vases and boxes. I have been turning for just a few years and I have found that I love it. I get lost in my work and that helps me cope with my the day to day work life. Showing my work on YOUTUBE has changed the way I turn, I enjoy showing others what i'm doing and maybe them be better turners. Thank You For Watching Tommy

 

Spirit Stain Multi-Colour 1
By: Stewart Furini
April 12, 2017 · 1,202 views

Playing with spirit stains and getting a great effect I'll probably never get again! I think it looks a bit like stone or rusted metal... http://stewartfuriniwoodturning.co.uk - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Wood Tuning Cedar bowl with hydro dip paint design.
By: Tommy Akridge Designs
April 09, 2017 · 23,742 views

This video is about turning a cedar bowl and dipping it into old paints for a specal look. Check out Nick Video of Atlanta https://youtu.be/YGHFNN1N-6Ahttp://www.thewoodworkingshows.com/atlanta.html Check out my website@ TommyAkridgeDesigns.com My name is Tommy Akridge, I am a small town wood turner working on wooden bowls, segmented bowls and vases. some of my work could be considered art and also consist of Urns, vases and boxes. I have been turning for just a few years and I have found that I love it. I get lost in my work and that helps me cope with my the day to day work life. Showing my work on YOUTUBE has changed the way I turn, I enjoy showing others what i'm doing and maybe them be better turners. Thank You For Watching Tommy

 

Textured Blue Sycamore Bowl
By: Stewart Furini
April 09, 2017 · 2,350 views

http://stewartfuriniwoodturning.co.uk Turning, texturing and colouring a sycamore bowl blank using a proxxon grinder, Chestnut spirit stains and an airbrush. This is a demonstration of how I work. If you want to do something similar, make sure you follow all safety instructions that come with your tools. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Decorative Bowl Rim Ideas1
By: Stewart Furini
April 02, 2017 · 2,380 views

Two decorative ideas for bowl rims - one using black lacquer and spirit stains over a textured surface, the other using metal leaf and dry brushing with acrylic paint. Check out my website http://www.stewartfuriniwoodturning.co.uk - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Carved Double Coloured Rim
By: Stewart Furini
March 26, 2017 · 1,178 views

http://stewartfuriniwoodturning.co.uk Coloured and carved rim platter demonstration using Chestnut spirit stains applied with an airbrush and a Proxxon long neck angle grinder with Arbortech mini saw blade - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

Thank You Cactus Sam
By: dc9apu
March 25, 2017 · 510 views

This video is about Thank You Cactus Sam e mail curmudgeoncalls@gmail.com Cactus Sam E-mail: Chollawoods@icloud.com Cactus Sam eBay page: eBay :505farm

 

Airbrushed Platter Rim
By: Stewart Furini
March 19, 2017 · 1,414 views

http://stewartfuriniwoodturning.co.uk An airbrushing technique to decorate a platter rim using spirit stains and a basic template. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

#17 A textured Milliput bowl
By: Andrew Whale
March 09, 2017 · 1,926 views

Hi I hope you like my new video. I was wanting to produce something using both texturing and Milliput techniques - so I made this bowl. At one stage I thought it would turn out to be a total disaster, but I'm now very pleased with the result. However it's not really practical as a bowl! I'm starting to gain a lot of confidence with the bowl gouge and I love it when the wood comes off in streams. Apart from lots of practice, I've learned that it is vital to have sharp tools. I've found that spending just 5 minutes sharpening my tools before starting on the lathe can make a huge difference in te

 

Cactus Juice And A PID Controller
By: dc9apu
February 26, 2017 · 556 views

This video is about Cactus Juce And A PID Controller E-mail: curmudgeoncalls@gmail.com Link how to set a PID controller for heat. https://www.youtube.com/watch?v KFVcrtQ_pdQ&t 33s

 

Wood turning - First time turning Milliput epoxy bowl (American black Walnut)
By: CraftWithAfshin
February 21, 2017 · 13,774 views

Hi everyone today i decided to try out Milliput epoxy for side of bowl, please let me know what you think and I hope you enjoy it!

 

Lathe Painting With My Daughter
By: Jerry Paul
February 19, 2017 · 746 views

I had to do some more of these. I did one on Friday for my TV show on Access 7 Yorkton, and when my daughter came to visit, I wanted to do one with her too. We had a lot of fun with this. I just ran the lathe and I let her do all the painting. I may make the Sunday lathe painting a thing....

 

How To Ebonize Wood Fast
By: SG Art Turning
February 16, 2017 · 18,829 views

Patreon : https://www.patreon.com/sgartturning You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg Email : simgadoury@gmail.com Web Site : https://sg-art-turning.com Facebook : https://www.facebook.com/SGTurning

 

WIN!*NEW* Intrinsic Colours and Hampshire Sheen in Martin's Marvelous Giveaway
By: M. Saban Smith Woodturning
February 15, 2017 · 2,406 views

I said it was coming, and here it is! The giveaway for the new stuff! Watch the video to find out how you can be in with a chance of winning a fabulous prize. Here's what's up for grabs in the giveaway: 1 x Full Set of 250ml bottles of the new Intrinsic Colours (UK); 4 x Four sets of the Intrinsic 15ml Sample Sets (Global); 4 x 95g tins of New Hampshire Sheen BeeLine Wax (UK); 1 x 'Partners in Shine' Hampshire Sheen and Yorkshire Grit combo set (UK) 4 x copies of The Woodturners Journal (Global) PLUS Everyone who enters will receive a 10% discount code for use on http://www.msabansmith.com For full details and terms and conditions, visit: http://www.msabansmith.com/product/giveaway Good Luck! 15th Feb @ 1.40pm: *** The 16 pots of BeeLine Wax have SOLD OUT ***

 

Alumilite Infusing Bodark & Double Dyeing
By: dc9apu
February 14, 2017 · 965 views

This video is about Alumilite Infusing Bodark & Double Dyeing E-mail: curmudgeoncalls@gmail.com

 

Texturing Demonstration
By: Ron Brown
February 13, 2017 · 3,092 views

A typical Texturing Demonstration at The Woodworking Shows by Ron Brown. He uses Knurling Tools, a Chatter Tool, and artist's markers for color. More info at www.ronbrownsbest.com

 

Alumilite Infusing Pine
By: dc9apu
February 10, 2017 · 865 views

This video is about Alumilite Infusing Pine E-mail: curmudgeoncalls@gmail.com

 

Floating Disc Explained
By: Gord Rock
February 08, 2017 · 7,277 views

Gary asked me to better explain how to insert a floating disc. I hope this works for him!

 

Double dying burls compared to plain / simple woods.
By: Ethan Cook
February 06, 2017 · 1,966 views

This is a quick informational video I did to show what happens when you Double Dye and stabilize in cactus nice Burl wood compared to non burl wood. Lots of people getting chambers and dyes and I don't want you to waste your money trying to get amazing results on plain / simple wood. Ive been doing tests like a mad scientist. Fancy double dyes start with Fancy wood. Enjoy. #CookCraftedWorkshop #doubleDye #PenTurning #BurlsRock

 

Drying Bodark With Alcohol
By: dc9apu
February 04, 2017 · 1,686 views

This video is about Drying Bodark With Alcohol E-mail: curmudgeoncalls@gmail.com

 

Alumilite Infusing Bodark / Osage Orange
By: dc9apu
February 04, 2017 · 2,219 views

This video is about Alumilite Infusing Bodark / Osage Orange E-mail: curmudgeoncalls@gmail.com

 

Dyeing Duck Call Blanks with Aniline dye
By: dc9apu
January 22, 2017 · 1,062 views

This video is about Dyeing Duck Call Blanks with Aniline dye E-mail: curmudgeoncalls@gmail.com

 

Stabilizing & Triple Dyeing Buckeye Burl
By: dc9apu
January 22, 2017 · 3,424 views

This video is about Stabilizing & Triple Dyeing Buckeye Burl E-mail: curmudgeoncalls@gmail.com

 

SCORCHING WOOD?! Accenting Your Pieces
By: Peter Matthew
January 16, 2017 · 771 views

Check this out! I used a blowtorch to scorch a couple of bowls! Send Mail Here Peter Matthew 6388 East Executive Drive Westland, MI 48185 Check out my WEBSITE http://www.peterturnswood.com EBAY STORE http://www.ebay.com/usr/dste6080 EMAIL FOR BUSINESS INQUIRIES OR QUESITONS: peterturnswood@gmail.com AWESOME WOODTURNING PLAYLISTS https://www.youtube.com/playlist?list PLE2bcZVXSO84px9YMPMvQhkK_KezJUcWR https://www.youtube.com/playlist?list PLE2bcZVXSO84v4QYhuPqfAFvnP6hPvZXc https://www.yo

 

Wood turning - trying out Acrylic colors on bowl! (cherry)
By: CraftWithAfshin
January 13, 2017 · 597 views

Hey guys today i thought i do something different im mixing up few Acrylic colors together to see how it turns out it turned out better then i expected! Music: Facile by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100858 Artist: http://incompetech.com/ Aretes by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100325 Artist: http://incompetech.com

 

Sorby texture tool test by Al Furtado
By: Al Furtado
December 31, 2016 · 3,093 views

Sorby texture tool test I turn a slim Brazilian Pepper tree vase, I must say the tool works great but in this case the wood had enough character to stand on it's own. I have to admit Pepper tree has some amazing character

 

Turning And Coloring An Ash Bowl With Alcohol Inks
By: DeadTreeWoodWorks
December 28, 2016 · 8,893 views

Turning an ash bowl from blank to finish and then coloring it with alcohol inks in a marbled pattern. Link To Bowl - https://www.etsy.com/listing/501709477/ Etsy Shop Link - https://www.etsy.com/shop/deadtreewoodworks

 

Double Dyeing Maple Burl
By: dc9apu
December 25, 2016 · 2,794 views

This video is about Double Dyeing Maple Burl E-mail: curmudgeoncalls@gmail.com Etsy page......... RecycleNature

 

#76 Wood Turning and Embellishing an Ancient Shield with Metal Reactive Paints
By: M. Saban Smith Woodturning
December 24, 2016 · 7,098 views

For this week'a wood turning project I hark back to ancient times and turn a shield from sycamore and embellish it with Modern Masters Reactive Paints - you know, the ones that tarnish. It was nice to get back to some artistic wood turning to make this piece on the lathe. *Keep up with my socially!* Facebook: http://www.facebook.com/msabansmith Twitter: http://www.twitter.com/msabansmith Google : https://plus.google.com/ Msabansmith/ Instagram: https://instagram.com/msabansmith At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the

 

Double Dyeing Buckeye Burl
By: dc9apu
December 04, 2016 · 4,516 views

This video is about Double Dyeing Buckeye Burl E-mail: curmudgeoncalls@gmail.com

 

Le PicBois - Laser Engraving
By: Le PicBois
December 03, 2016 · 1,325 views

[ This is my first time with laser engraving ] Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois ____________________________________ Thanks to ALL my supporters on Patreon: Luis Gonzales, Ento Hamelin, Carl Jacobson, Olivier Coursol, Elaine Go, Brandon Connors, Corey Neuman, Tony Dew, Benoit Pelletier, Make Something, Get Hands Dirty, Jamie Page, Jackman Works, Scott Haun, Francis LaBrie, Alain Lebarbé, Jayson Nuckolls & Matt Jones. You really make a difference! Thank you so much! ____________________________________ I work for free and I pay my director with cookies… Please help me to buy some flour by clicking on the link below: https://www.paypal.me/lepicbois

 

Teller drechseln mit FIMO Knetmasse Wood Turning with FIMO Modelling Clay Projekt 5
By: Andreas Achleitner
December 03, 2016 · 873 views

Heute habe ich eine Schüssel aus Lind gemacht und die Risse mit blauer Knetmasse gefüllt.Wenn du mehr von meinen Projekten sehen möchtest, dann schau einmal auf meinem Kanal vorbei https://goo.gl/qbGsjv FIMO Knetmasse https://amzn.to/2KR4aHd Mein Name ist Andreas Achleitner und ich arbeite sehr gerne mit Holz. Die Themenbereiche umfassen von der Theorie bis zur Praxis eine gute Mischung zum Thema Holzbearbeitung. Mehr Informationen über meine Maschinen und Werkzeuge findest du auf meiner Webseite. Facebook - https://www.facebook.com/achleitnerandreas Instagram - https://www.facebook.com/achleitnerandreas Webseite - https://www.handgemachtes.at Musik: lizenzfrei von YouTube Alle Links mit * sind Amazon Affiliate Links *Amazon https://amzn.to/2qSYoeN

 

Bottom treatment Part 2, bowl with carved feet
By: Lyle Jamieson
November 30, 2016 · 2,060 views

I have booked some live demonstrations around the country and Europe from my shop, with my tools, my cameras. If you are interested give me a call. 231-947-2348 lylejamieson.com Woodworkers Supply, Sleeveless drum sanders, part #815-895 Welcome to my channel. I have been turning all my life and want to share the techniques I discovered over the years. The first 40 videos on my channel were technique oriented showing different parts of the process. Lately, I have been doing project oriented videos. I still hope over the long haul to cover all the techniques over multiple videos. This project

 

Painting on a lathe
By: The AZ Viking
November 27, 2016 · 40 views

Short vid

 

#73 Colouring a Spalted Beech Wood turning Project Using Crimson Guitar Stains
By: M. Saban Smith Woodturning
November 26, 2016 · 12,000 views

It's been a while since I posted a wood turning project video, but I'm really pleased to be back...and this time at the lathe from the new 'Black Dog Workshop'. This is a brave project that uses Crimson Guitar colouring stains on a 13.5' spalted beech bowl, finished with acrylic sanding sealer and Hampshire Sheen High Gloss. For more information about Crimson Guitars Stains, please visit http://www.crimsonguitars.com and tell them Martin Saban-Smith sent you! See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see i

 

Bottom treatment part one, hollow form reverse chucking
By: Lyle Jamieson
November 23, 2016 · 2,134 views

I have booked some live demonstrations around the country and Europe from my shop, with my tools, my cameras. If you are interested give me a call. 231-947-2348 lylejamieson.com Welcome to my channel. I have been turning all my life and want to share the techniques I discovered over the years. The first 40 videos on my channel were technique oriented showing different parts of the process. Lately, I have been doing project oriented videos. I still hope over the long haul to cover all the techniques over multiple videos. This project format is much better at showing the entire turning sequenc

 

Segmented Turning1
By: Northcoast Woodturners
November 23, 2016 · 3,506 views

Tim Niewiadomski adds plugs to a segmented turning to add to its appearance.

 

Etching a celtic pattern in a decorative lid
By: Steve Krumanaker
November 19, 2016 · 811 views

Short video showing a cheap laser engraver, engraving a pattern onto a decorative mason jar lid. If anyone is interested I have a blog on the patriot woodworker at this url http://thepatriotwoodworker.com/blogs/entry/30-you-just-never-know

 

Embellishments that effect pricing on turned art, Sam Angelo
By: WYOMINGWOODTURNER
November 10, 2016 · 14,131 views

When selling turned pieces Sam factors in when to add embellishments to his work. It is all about selling and how to make that happen. Link to Ver Day metal reactive paint http://www.tensecondsstudio.com

 

#15 Woodturning - Colouring another spalted beech bowl with gloss finish
By: Greenvill Woodturning
October 26, 2016 · 5,644 views

After turning and colouring a spalted beech bowl yesterday I have turned another with a different colour scheme This is the gloss finish I used: http://amzn.to/2dKFzBS

 

#14 Woodturning - Colouring a spalted beech bowl with gloss finish
By: Greenvill Woodturning
October 24, 2016 · 3,365 views

Today I turn a spalted beech bowl and apply colours and finish the piece off with a high gloss The Gloss is Plasti-Kote http://amzn.to/2eyKiLJ

 

Off centre Sycamore bowl
By: Turning Works
October 24, 2016 · 1,001 views

This is an off centre sycamore bowl inspired by Gary lowe, his link is below. After a very challenging week I finally have it finished! I thought the Trailblazer bowl was complex, but this took things to another level! Over two hours of clips ended up on the floor - a lot of it swearing at the things that happened! Watch now to see how it turned out! Gary Lowe https://www.youtube.com/channel/UCgdG-Vh5Uj2GNdVgnsDEMtA

 

Fractal burning
By: Rich McNatt
October 23, 2016 · 753 views

Just a little Sunday morning fun

 

Truth about Fractal wood burning
By: Rich McNatt
October 13, 2016 · 10,042 views

How NOT to DIE!!!!! Still not SAFE and you need to use extreme caution when using.

 

corian polishing video by Prokraft
By: Jon Whateley
October 08, 2016 · 482 views

See how quick, clean and easy polishing corian pens can be with the Prokraft Acrylic Paste. This product is available here: http://www.prokraft.co.uk/other-kits.html

 

Colors of the Rainbow - Woodturning
By: David K
October 06, 2016 · 2,966 views

This is my first attempt using stain for coloring a bowl. The bowl is turned out of Cherry and wasn't in good condition. I left the rotten wood and cracks on purpose instead of filling them up. For the finish, i sprayed multiple layers of clear laqucer. Please enjoy, and a comment would be very appreciated! https://www.facebook.com/davidkholz/ If you want to see more, click here: https://www.youtube.com/davidkholz?sub_confirmation 1 Um meinen Kanal zu abonnieren, klicke bitte hier: https://www.youtube.com/davidkholz?sub_confirmation 1 ------------------------------------------ Music: Triangle - Audionautix Camagüey - Silent Partner

 

Coloring a Box Elder Hollow Form with Sam Angelo
By: WYOMINGWOODTURNER
October 06, 2016 · 7,191 views

Sam shows his process for coloring a Box Elder hollow form. He begins the process by injecting dye 'inside' the vessel. A procedure he credits to Chris Pytlic. This video also contains some basic airbrushing.

 

Acrylic Polishing Paste from Prokraft
By: Jon Whateley
October 06, 2016 · 359 views

See how quick, easy and clean it is to polish your acrylic pens and turnings in minutes. A unique product formulated by Prokraft and available here: http://www.prokraft.co.uk/other-kits.html

 

Stressed Out Bowl
By: Jeremy Edwards
September 30, 2016 · 4,929 views

I believe this is maple. It could be myrtle wood. This chunk was given to me by my dear friend Andy Libecki. Enjoy!

 

Woodworking Project Filling Lichtenberg Figures With Acrylic Paint
By: The Woodshop
September 19, 2016 · 8,873 views

Lichtenberg figures are branching tree-like patterns that are created by the passage of a high voltage discharge along the surface. I filled some of the figures in with acrylic paint, and finished it with lacquer. Conestoga Works- http://www.conestogaworks.com Kansas City Woodturners http://kcwoodturners.org/ Jimson's Stuff https://www.youtube.com/channel/UC6h82LH3PtdiSHaj_7f09Fg/featured Ozzy Woodwerx https://www.facebook.com/ozzywoodwerx/ Disclaimer: I'm NOT an expert in anything!! Especially Electricity! It is your responsibility to read and understand how to properly use this system.

 

How To Burn Wood With Electricity - Lichtenberg Figures!
By: Carl Jacobson
September 16, 2016 · 66,803 views

Lichtenberg figures are branching tree-like patterns that are created by the passage of a high voltage discharge along the surface, or through, electrically insulating materials. In this video I burn Lichtenberg Figures into wood using Charles Waggoner's wood burning system. Conestoga Works- http://www.conestogaworks.com Disclaimer: I'm NOT an expert in anything!! Especially Electricity! It is your responsibility to read and understand how to properly use this system. Safety notice: The output voltage and current (12,000 volts @ 35 mA) from this burner can cause serious burn, injury, or

 

Burnmaster Hawk and Eagle Woodburners
By: Craft Supplies USA
September 13, 2016 · 17,825 views

Burnmaster Woodburners are Mastercarver's top of the line woodburning systems. Learn more: https://www.woodturnerscatalog.com/p/142/6700/Burnmaster-Hawk-Pyrographic-Burner?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA The Burnmaster Hawk and Eagle are both manufactured with the finest components, so you can enjoy maximum performance and convenience. With 130 watts of power and precision variable heat adjustment, you have lots of power for stamping, texturing and more. Craft Supplies USA (The Woodturne

 

Woodturning - Walnut bowl with gold carved detail
By: Turning Works
September 04, 2016 · 627 views

This was meant to be a test piece to try out a new abrasive paste, but the bottom finished so well I decided to finish the bowl and see what it wanted to be! A big THANK YOU to everyone who has subscribed to this channel - it is much appreciated! Also thanks to everyone who has commented - it all helps to make my turning and this channel better - if you have any suggestions, please let me know! Yorkshire Grit is available from Glyn Senior at; http://www.yorkshire-grit.com Please LIKE, SUBSCRIBE and leave a comment! :D Whatdafunk by Audionautix is licensed under a Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ Pop Metal by Audionautix is licensed under a Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Making and painting a bowl
By: Harry’s Woodcraft
August 31, 2016 · 9,693 views

Harry’s Woodcraft at the Little Garden Shed Workshop Making and painting a bowl Inspired by Gary Lowe Cosmic clouds Bowl https://www.youtube.com/watch?v _tMdQ3p5dqs Music: Humidity silent partner Thank you for watching Please like, share and subscribe You can also follow me on: facebook: https://www.facebook.com/harrybrian.watts Instagram https://instagram.com/harrys_woodcraft/ twitter: https://twitter.com/HarrysWoodcraft

 

Woodturning A Cosmic Platter
By: Colbe Pease Woodworking
August 30, 2016 · 11,548 views

In this video, I turn a platter and paint a Cosmic design on it. I saw this technique on Gary Lowes Channel

 

Woodturning a colourful Sycamore Hot Glue bowl!
By: Turning Works
August 29, 2016 · 1,703 views

Starting with a 10' x 2' Sycamore blank you can see the in-depth, multiple processes that create the final piece! I would like to thank; Martin Saban-Smith - https://www.youtube.com/channel/UCpHZv5j6vdMmFjXHDBxPLxw and Mike Waldt - https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w for helping me to learn this wonderful craft. Martin and Mike were the first two YouTube channels I watched when I started last November and I owe them a LOT! THANKS GUYS! I answer all comments - don't forget to LIKE and SUBSCRIBE! P.S. ...I wore the Despicable Me Tee shirt as a nod to Steve Twydell at Templeboy Turnings to acknowledge his 50 hour journey to Canada to see his friend Rob Summerlin (Woodslee Summercraft)! I watched the whole epic episode unfold - well done Steve! Whatdafunk by Audionautix is licensed under a Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Woodturning at 54a. #95. First impressions of Hampshire Sheen
By: Keith Barrow
August 28, 2016 · 2,534 views

Here is a short video giving you my first impressions of Hampshire Sheen Original.Please note that this is only MY opinion.I have not been asked to do this,it is purely my decision.Over the coming weeks I will be trying out the complete range of Hampshire Sheen products,which will be as add-ons to my videos. For more information and stockists of this product,please go to http://www.hampshiresheen.com https://www.etsy.com/shop/Woodturningat54a

 

THE MILIPUT STAR BOWL
By: Nick Zammeti NZ WoodTurning
August 28, 2016 · 12,582 views

This is a woodturning project, woodturning idea. Here I made a star bowl using the Miliputs Putty Resin. this project took some time to complete. The wood used is Goncalo Alves wood. Woodturning this was ok but the resin part was hard work and I had to do this twice. MY EMBLEMS http://www.beerbranding.co.uk/ MUSIC BY BEN MURRAY-SMITH https://soundcloud.com/ben-murray-smith SUBSCRIBE TO ME ON YOUTUBE https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA FOLLOW ME ON TWITTER https://twitter.com/NZWoodturning HERE IS MY FACEBOOK PAGE https://www.facebook.com/nzwoodturning/ INSTERGRAM https://www.instagram.com/nickzammeti/?hl en MY NEW CHANNEL https://www.youtube.com/channel/UCAQsI9pUgViHsOOya-J3sTQ

 

Woodturning Milliput and Bowls for Good
By: The Woodshop
August 22, 2016 · 2,495 views

I got to hangout with another local woodturner Todd Halleman this weekend. Todd is working with Ben Farrell from 'Bowls for good'. Bowls for good is a organization that works with at risk kids through woodturning. Todd Halleman-Bowls For Good challenge results https://www.youtube.com/user/tohall18 Charlie Hamilton-https://www.youtube.com/channel/UC5olventSXvx4Ln8HSnMG5w Anthony-https://www.youtube.com/channel/UClVmRHyW7Gu_6C74SCjQ47Q/featured Pat AKA Le PicBois-https://www.youtube.com/channel/UCcM_SykaFqrxVnq52MjI6UA/featured Average Joes Joinery-https://www.youtube.com/user/AverageJoesJoiner

 

Making the Leather Logo Discs
By: Jim Overton - Jimson's Stuff
August 22, 2016 · 2,393 views

My name is Jim Overton, welcome to my channel. Thanks for watching. Please like, share and subscribe. Disclaimer Woodturning is potentially dangerous! My videos are designed to give viewers creative ideas. The way I work is not necessarily the best or safest way to work! Your safety is your own responsibility not mine. Please follow all safety procedures and wear personal protective equipment. Wear a visor and a respirator dust mask at all times. Be safe, be creative and enjoy your turning.

 

Milliput Epoxy Inlay- Lidded Boxes
By: Carl Jacobson
August 19, 2016 · 17,423 views

Milliput is a two part epoxy putty that can be molded into any shape you want. It's great for inlaying into turned bowls and boxes. I turner the lid, base, and body for these boxes out of Maple. Jimson's Stuff https://www.youtube.com/channel/UC6h82LH3PtdiSHaj_7f09Fg Bill Livolis-https://www.youtube.com/user/johnnyatropos Supplies and tools used: Milliput Black: http://astore.amazon.com/thewood0c-20/detail/B002CSX7Z8 Milliput Terra: http://astore.amazon.com/thewood0c-20/detail/B01H2S2MJO Robust Lathe: http://thewoodshop.tv/robust-lathe/ Roughing Gouge: http://astore.amazon.com/thewood0c-2

 

#11 Woodturning - Hydro Dip Bowl (inspired by Gary Lowe)
By: PolishWoodturner
August 18, 2016 · 10,695 views

Inspired by Mr. Gary Lowe, I decided to make a bowl and color it using popular hydro dipping technique. I was curiour if that works for wooden objects as well. That bowl can be called prototype. I made a lot of mistakes during making it but also I learnt a lot! If you haven't seen Gary Lowe channel yet, here's the link: http://bit.ly/2bAbpCP I hope you like my idea. Please like, share and subscribe!:)

 

#10 Woodturning - Making a Dyed Bowl [Ash]
By: PolishWoodturner
August 15, 2016 · 1,304 views

That bowl has a long story. It all started on June. Ash tree next to our house collapsed. It damaged power line. We had no electrocity for over two days. Easy? No way. Without the eletricity, we had no warm water, no light, no heat and after two days we got some issues with water (pump didn't work). That clearly shows how addicted to electricity we are. One old tree and 3 broken wires were enough to freeze our everyday life... ...but that really doesn't matter because now I have a lot of ash wood for woodturning!!! Ash is not my favourite but still very nice kind of wood. I decided to make a

 

Woodturning at 54a. #92. 'The Complete Fruit Bowl'
By: Keith Barrow
August 13, 2016 · 2,301 views

The final bowl rescued from last weeks disasters,I decided to try something a bit different!

 

CONNLA part 3
By: Robert O Connor The Woodturning Studio
August 12, 2016 · 135 views

Short video of Robert using arbortech disc to add texture and design to Connla and also using a sanding disc before final finishes applied. Hours of work is put into getting the finish right.

 

Woodturning at 54a. #91. 'A Coloured Lidded Ash Bowl'
By: Keith Barrow
August 11, 2016 · 4,194 views

One of last weeks disasters turns into this weeks success!

 

Woodturning at 54a. #90. A Coloured Bowl.
By: Keith Barrow
August 08, 2016 · 2,495 views

A coloured bowl to match a goblet I did a few weeks ago. Link to Brendan's channel: https://www.youtube.com/channel/UCk6YkskO3CfgrerYjHNityg Yorkshire Grit: http://yorkshire-grit.com

 

CONNLA
By: Robert O Connor The Woodturning Studio
August 05, 2016 · 164 views

Video part 2 of CONNLA in the making, here I am using an arbortech disc to add design to the inner spear.

 

MVI 6074
By: Robert O Connor The Woodturning Studio
August 03, 2016 · 696 views

Part 1 of a video of the making of CONNLA which can be seen on exhibition at the Gorey Library. CONNAL is made from a LARGE piece of bur elm, the timber started at 40' x 40'

 

Orange peel texturing on a turning
By: Jim Meier
July 24, 2016 · 928 views

Adding a decorative orange peel textured effect to the outside of a turned wooden bowl!

 

Woodturning With The Naked Turner Quick Copper Patina Video
By: Erik Anderson
July 23, 2016 · 1,556 views

In this video I put a vinegar and salt patina on a copper table

 

Kids and Woodturning: wyomingwoodturner and granddaughters
By: WYOMINGWOODTURNER
July 16, 2016 · 3,192 views

Sam shows a good way to get kids into the shop and interested in working with wood. Eva, Sofia, and Grace help with another VerDay paint project. Coloring wood with metal reactive paint.

 

Dave Landers - Telsa Bowls
By: Rocky Mountain Woodturners
July 15, 2016 · 18,345 views

Dave Landers demonstrates how to decorate turnings with Lichtenberg figures generated by high voltage. Presented to the Rocky Mountain Woodturners on July 7, 2016.

 

#66 Dye on Olive Experiment
By: Yuval Lahav Woodturning
July 14, 2016 · 5,478 views

I was told that Olive is so pretty it should never be dyed, but I can never listen to anyone but myself!! In this video I'm testing to see if some dye on Olive adds or detract from the beautiful grain. Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe!

 

Woodturning Q&A Wood Piercing
By: The Woodshop
July 11, 2016 · 3,089 views

Wood piercing is a great way to add detail to a piece. Rotary tool http://astore.amazon.com/thewood0c-20/detail/B006SJJUU8 Yorkshire Grit UK http://yorkshire-grit.com/ US http://www.thewalnutlog.com/ CA rasummerlin70@gmail.com Mike Urquhart Yin Yang Tempate http://simplyamazingwood.com/index.php/other-items I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon http

 

Live Edge Elm Coloured Resin Bowl
By: Nick Zammeti NZ WoodTurning
July 07, 2016 · 32,405 views

This is a piece of Elm. I turned this and added lots of different coloured resin to the middle to form a coloured pattern . I purchased the coloured dust here http://www.ebay.co.uk/itm/metallic-epoxy-resin-pigments-sample-pack-/112047393634? I got the shellawax friction polish here:- http://www.toolpost.co.uk/pages/Finishes/Shellawax/shellawax.html Yorkshire Grit from here http://yorkshire-grit.com/product-page/ Music provided by Bensound Music: http://www.bensound.com

 

Gold Dust Bowl
By: Nick Zammeti NZ WoodTurning
July 02, 2016 · 8,916 views

so here I made a bowl using some resin and I mixed some gold dust with it. the dust really works well. In this video I also had an accident, which was scary. Music provided by Bensound Music: http://www.bensound.com Gold dust bought from here http://www.ebay.co.uk/itm/100g-metallic-epoxy-resin-pigments-gold-/112034501273?

 

Adding Pizzazz to Woodturning with Texturing Episode 3
By: Mike Peace Woodturning
July 01, 2016 · 2,672 views

A Wagner style woodturning texturing tool can increase the tactile and visual appeal of wood turning. I explain and demonstrate the differences between the different size Wagner style knurling tools. Click here to watch Adding Pizzazz with Texturing Tools Episode 1 https://youtu.be/GJ5xgEHSuJU Click here to watch Adding Pizzazz with Texturing Tools Episode 2 https://youtu.be/4KDgVQyhd8I The original Wagner tool is available from: Craft Supplies WWW.woodturnerscatalog.com Get Ron Brown’s Best Texturizing Tool at www.PtreeUSA.com

 

Add Pizzazz to Woodturning with Texturing - Part 2
By: Mike Peace Woodturning
June 24, 2016 · 5,359 views

I show how to texture wood. A Rotary Texturing Tool similar to the Taylor Decorating Elf tool can increase the tactile and visual appeal of woodturning. I demonstrate how to add embellishments to turning projects using a shop made rotary texturing tool using a Dremel burr. I also show how to use a cove tool, a point tool and metallic wax to emphasize the texturing. The primary strength of this tool is its simplicity in adding a small feature to a box or bowl bottom. Click here to watch Adding Pizzazz with Texturing Episode 1 https://youtu.be/GJ5xgEHSuJU Click here to watch Adding Pizzazz with Texturing Episode 3 https://youtu.be/ynJU_Zu9904 You can download an article on how to make one from my website at: www.MikePeaceWoodturning.blogspot.com You can also buy a kit from www.HighlandWoodworking.com

 

#116 Lichtenburg Fractal Woodburing Followup
By: Stephen Ogle
June 23, 2016 · 25,186 views

Thanks to viewer's comments and personal research into Lichtenburg Fractal Woodburning. This video is a followup of my last video where my results were not as expected. This video covers everything I have learned to get really good results from this technique of woodburning.

 

Adding Pizzazz to Woodturning with Texturing - Part 1
By: Mike Peace Woodturning
June 17, 2016 · 6,121 views

Texturing can increase the tactile and visual appeal of woodturnings. I compare and contrast the large and micro Sorby Spiraling and Texturing tools and demonstrate how to quickly add embellishments to various turning projects such as bowls and boxes and more. I end with a slide show of textured projects. Click here to watch Part 2 https://youtu.be/4KDgVQyhd8I Click here for Part 3 https://www.youtube.com/cards?video_referrer watch&v ynJU_Zu9904 Download Spiraling and Texturing references mentioned in this video from my website http://mikepeacewoodturning.blogspot.com

 

Brian Humbel demonstrates the Lichtenberg effect
By: Mid-Maryland Woodturners Club
June 14, 2016 · 14,164 views

Brian Humbel demonstrates the Lichtenberg effect for decorating wood with lightning bolt patterns at the June 2016 meeting of the Mid-Maryland Wood Turners Club.

 

Woodturning With The Naked Turner Colorized Golden State Warriors Bowl
By: Erik Anderson
June 13, 2016 · 2,192 views

I turn a Maple bowl and show how I colorize it using printer ink on a Golden State Warriors inspired bowl.

 

Clear coloring a woodturning!
By: Jim Meier
June 12, 2016 · 2,517 views

Color Finishing a woodturning with a clear color finish.

 

Double Dyeing Update No Vacuum Necessary
By: dc9apu
June 08, 2016 · 9,762 views

This video is about Cactus Juice Double Dyeing Update My Etsy Store https://www.etsy.com/shop/RecycleNature?ref hdr_shop_menu

 

#115 Poplar Bowl with Lichtenburg Woodburning
By: Stephen Ogle
June 07, 2016 · 22,977 views

Truly 'Turning and Burning'. In this video we will turn a natural edged Poplar bowl and use the Lichtenburg Fractal Woodburning methods to produce a one of a kind piece. Tim Yoder's Lichtenburg project: https://www.youtube.com/watch?v b__z2apE7dA Building a Lichtenburg Wood Burner: https://www.youtube.com/watch?v CbNZ7NBXAMA

 

BayLake Woodturners May 2016
By: BayLake Woodturners
May 22, 2016 · 191 views

Embelishing demo by Werner Witek. Werner took us through his design process, the tools and materials he uses, then showed us how he embellishes a turned platter. He uses pyrography, carvimg and paint to enhance his turnings. He is a true artist and craftsman.

 

Inlay with InLace Pt2
By: Woodcraft of Spokane
May 11, 2016 · 783 views

This is Part 2 of 2 , , , Join Larry for a demonstration of a really unique product called Inlace. Take your inlays to a whole new level with Inlace. Larry will show you just how easy it is to use. InLace Kits are available in ten pre-mixed custom colors. For artisans that want to control every aspect of color and texture in their InLace 'recipes', a Clear kit is also available. The kit is the heart of the InLace inlay system. Additives can be used to customize the premixed color kits, and create unique Inlace 'recipes'.

 

Inlay with InLace
By: Woodcraft of Spokane
May 10, 2016 · 2,940 views

Join Larry for a demonstration of a really unique product called Inlace. Take your inlays to a whole new level with Inlace. Larry will show you just how easy it is to use. InLace Kits are available in ten pre-mixed custom colors. For artisans that want to control every aspect of color and texture in their InLace 'recipes', a Clear kit is also available. The kit is the heart of the InLace inlay system. Additives can be used to customize the premixed color kits, and create unique Inlace 'recipes'.

 

#61 Airbrush Overview and Spirit Stains for Woodturning
By: M. Saban Smith Woodturning
May 04, 2016 · 7,759 views

This week, take a look around my main artistic tools in the workshop: My airbrush and compressor kit, together with the two brands of spirit stain I use to colour my woodturning projects. If you are interested in expressing your artistic flare on your own with and airbrush, see below for useful links to stuff shown in this video: The links will take you to your local Amazon store. Airbrush and Compressor: http://geni.us/3zfB Spirit Stain: http://geni.us/7G2 For eBay links, visit the blog post for this video here: http://goo.gl/9vZLru At http://www.msabansmith

 

#110 Turning Glasslike Finish on Acrylic
By: Stephen Ogle
April 29, 2016 · 6,888 views

This video is a demonstration of how to get a high luster finish on acrylic cast in my last video. This project also talks about the different types of molds I have used and where to get the materials for making them. Here is a link to Alumilite's product page. http://www.alumilite.com/store/pg/19-Products-Alumilite-Mold-Making-Casting-Materials.aspx

 

#60 - Woodturning Burr Burl Oak Winged Bowl with Copper Inlay
By: M. Saban Smith Woodturning
April 26, 2016 · 96,748 views

In this week's woodturning project, I go kinda longways rather than completely round with a winged burr oak bowl with copper powder infill. Find out more about Copper and Caramel on my website here: http://goo.gl/LbF6Kj See Below for useful links to stuff used in this project (see the website for eBay links). Thank you to Mike Waldt for giving me the piece of wood way back in October. https://www.youtube.com/user/TheCymruBoy At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free v

 

Woodburning With Lightning! Making Lichtenberg Figures!
By: The Russian Woodworker
April 25, 2016 · 437,057 views

In this video I show you how to reuse an old microwave transformer and make amazing looking woodburned figures! Stay Tuned through the video to figure out how I turned an old transformer into an awesome woodburner! I did this all on cement but it's conductive and I could've gotten shocked. Do this on a non inductive top like wood and also stand farther away from this than the distance inward from it. Disclaimer: I am doing this at my own risk and I take no responsibility for any harm that anyone does to themselves trying this. If someone hurts/ kills themselves doing this I take no responsibility. You have been warned, and try this at your own risk!

 

Wood Turning - How to Decorate an Ash Bowl with Hot Melt Glue
By: Mike Waldt
April 23, 2016 · 20,288 views

A different method of decorating your finished piece! Alex's Channel: https://www.youtube.com/channel/UClI5lRSijMGmYyfwepxcUUg UKIWS - http://www.ukiws.co.uk

 

Jimmy Clewes Coloring and Embellishing a Bowl Rim
By: jimmy clewes
April 23, 2016 · 8,365 views

 

Jimmy Clewes Scorching and Embellishing a Handle
By: jimmy clewes
April 23, 2016 · 32,051 views

 

Jimmy Clewes Embellishment Products - Turning a Handle
By: jimmy clewes
April 23, 2016 · 9,893 views

 

Jimmy Clewes Embellishment Products
By: jimmy clewes
April 23, 2016 · 6,983 views

 

Scorching bowl
By: Robert O Connor The Woodturning Studio
April 20, 2016 · 261 views

Short video showing Robert scorching a bowl before adding colour.

 

METAL REACTIVE PAINTS: Review, and a comment
By: WYOMINGWOODTURNER
April 18, 2016 · 9,498 views

Sam reviews metal reactive paints offered by Tensecondsstudio. He also comments on an important safety issue. Please listen and share. (Re: recent hollowing videos have been removed)

 

Concealing screw holes in a turned burl cap
By: Jim Meier
April 17, 2016 · 520 views

A step by step to concealing the screw holes in a burl cap after it has been turned.

 

Double Dyeing With Cactus Juice #3
By: dc9apu
April 15, 2016 · 5,072 views

This video is about Cactus Juice & Double Dyeing #3 My Etsy Store https://www.etsy.com/shop/RecycleNature?ref hdr_shop_menu

 

Woodturning with Tim Yoder- Lichtenberg Fractal Burned Vessel
By: woodturningwithtim1
March 31, 2016 · 881,277 views

Lichtenburg fractal burning or Lichtenburg pyrography is growing in popularity. In this episode Tim turns a southwestern style hollow vessel from green wood. He demonstrates how to shape and hollow the wood. Then he visits a professional Lichtenburg artist who explains the process and demonstrates how to use electricity to etch Tim's turned vessel. For more information on the Elbo Tool visit www.woodturningwithtim.com For more information on Arc Works Design www.arcworkdesign.com

 

Double Dyeing With Cactus Juice #2
By: dc9apu
March 31, 2016 · 6,638 views

This video is about Cactus Juice & Double Dyeing #2 My Etsy Store https://www.etsy.com/shop/RecycleNature?ref hdr_shop_menu

 

#52 Woodturning Mineral Inlay Followup and Shop Update
By: Yuval Lahav Woodturning
March 25, 2016 · 4,313 views

After getting so much advice from friends on Facebook and in the last video comments section, I had to finish up the second test blank I had left. I also talk about the two pen presses and cyclon separator I've built for the shop in the last couple of weeks, among other things. Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Double Dyeing and Stabilizing Wood
By: dc9apu
March 21, 2016 · 21,411 views

Double Dying and Stabilizing Wood Order brass tubing http://www.onlinemetals.com/merchant.cfm?id 84&step 2 Order rivets and aluminum tubing Wicks aircraft http://www.wicksaircraft.com/index.html Order rivets and aluminum tubing Aircraft Spruce http://www.aircraftspruce.com My Etsy Store https://www.etsy.com/shop/RecycleNature?ref hdr_shop_menu

 

#51 Woodturning Mineral Inlay Experiment
By: Yuval Lahav Woodturning
March 12, 2016 · 6,409 views

Inlays are one subject I've not had the pleasure to try my hands at, so before I go and ruin a piece I've turned, here is a quick test I've made. Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Kelly Latimore - Mt Princeton The Mind Orchestra - Moonlight All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Woodturning, Scorching, Colouring and Copper Binding 'Bound #2'
By: M. Saban Smith Woodturning
March 08, 2016 · 6,470 views

So this week woodturning project video, seeing as Bound #1 created a split of likes and not-likes, I go to town with making a perfectly good blank of sycamore look like it's hundreds of years old and bind a burnt/scorched false split with copper wire. See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list! Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com S

 

#59 Carving Tutorial Pt1 Pattern making
By: DIY with Uncle Cy
February 08, 2016 · 1,271 views

So you want to start carving? First you will need a pattern. This is one way to make a pattern from a photo. A panto-graph will simplify and enlarge a photo to be used as a pattern. I have posted a picture of the plans I used on my FaceBook fan page, https://scontent-dfw1-1.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/12662542_1079539825410619_7276168798353769462_n.jpg?oh cfbfe7c119fe6a3376cb55dfa26611c0&oe 572C9897

 

Woodturning at 54a. #61 Oak platter with epoxy and metal powder inlays.
By: Keith Barrow
February 06, 2016 · 6,976 views

Just trying out something new to me.What an enjoyable hobby this is!!

 

Woodturning and Air Brushing 'Dot Matrix' Sycamore Bowl
By: M. Saban Smith Woodturning
January 26, 2016 · 6,293 views

This week, I go back to colouring, but this time with a patten in the creation of 'Dot Matrix'. In this video, I mention @woodbug1 on Instagram as the inspiration for this piece - take a look at his work at http://www.instagram.com/woodbug1 See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list! Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com Something e

 

Woodturning a Banksia Pod with Bronze Infill
By: M. Saban Smith Woodturning
January 12, 2016 · 110,684 views

This week, I turn my attention to the Banksia Pod kindly sent too me weeks ago by Paul Relf. Those with trypophobia may not like this! After mulling over what to make of it, I decided on a box, which ended up as an objet d'art. Sadly not my finest work, but a good exercise in making metal paste with epoxy resin, spindle gouge work and sanding. See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a fr

 

Woodturning with Tim Yoder-Sandblasting
By: woodturningwithtim1
January 10, 2016 · 4,711 views

Turn a simple bowl to see the effects you can get with a sandblasting cabinet to add depth and grooves to your pieces. Tim also walks you through what woods work (and do not) for sandblasting.

 

Airbrush Acrylic Finish To Enhance Plain Wood Plate
By: As Wood Turns
January 01, 2016 · 3,731 views

http://www.AsWoodTurns.com Happy New Year. I started work on this poplar dish to prepare for a airbrush workshop taught by Jay Shepherd at Williamette Valley Woodturners. The poplar is approximately 9' diameter and 2' tall. Initially, I finished it with shellac friction polish to seal the wood. Then at Jay Shepherd's workshop, he recommended that I paint only the interior of the dish with an iridescent brown acrylic paint with my airbrush. That part was easy. The harder part then is to apply a rattle can clear lacquer and wet sand between every 6 to 10 coats. I've made it thru 220 grit wet

 

Marbeling inks
By: Gary Lowe Woodturner
January 01, 2016 · 30,926 views

Description

 

All done with the dyeing
By: yak branson
January 01, 2016 · 79 views

Finished dyed bowl. Green and blue dyes were used in this process.

 

Dyed bowl process
By: yak branson
December 28, 2015 · 2,572 views

Blue and green dyes on a lovely piece of figured wood.

 

I dyed... a figured bowl!
By: yak branson
December 22, 2015 · 315 views

Not the first time to dye and not the last. I am gettig into dyeing more so keep a look out for more like this from me.

 

Platter with stone inlay
By: Mauro il tornitore
December 11, 2015 · 690 views

A chestnut platter with a inlay of Jasper powder. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Un piatto di castagno con un inserto di polvere di diaspro. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro

 

Coloring Markers for the Wood Lathe: Woodturning with Sam
By: WYOMINGWOODTURNER
December 02, 2015 · 7,908 views

Sam shows some of his coloring markers used for decorating wood on the lathe. He focuses on 3 markers he gets from www.dickblick.com but there are many other sources.

 

Colouring No 4
By: Gary Lowe Woodturner
November 10, 2015 · 25,783 views

Description

 

Gary Lowe, Colouring Number 3
By: Gary Lowe Woodturner
October 29, 2015 · 6,699 views

Description

 

Colouring by Gary Lowe
By: Gary Lowe Woodturner
October 18, 2015 · 117,565 views

Description

 

Colouring Number 2
By: Gary Lowe Woodturner
October 17, 2015 · 6,625 views

Colouring by Gary Lowe

 

Airbrushing Round Two
By: Carl Jacobson
September 21, 2015 · 6,039 views

I'm really enjoying playing around with the airbrush. WIA http://videowoodworkers.com/ Ohio Valley Woodturners Guild http://www.ovwg.org/ Pat's beer glass video https://www.youtube.com/watch?v SOTVj8aPruY Shane's hobby shop https://www.youtube.com/channel/UCP8FfY7yOI98s_OInV_oopw I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.co

 

Woodturning Golden Fire Sycamore Platter and First Airbrush Use
By: M. Saban Smith Woodturning
September 14, 2015 · 145,779 views

This week, I show how I created my Nick Agar inspired 'Golden Fire' small platter from sycamore using a dremel, airbrush (which was my first attempt) and gold gilt. See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list! Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com Something else of interest: Read my FREE newspaper at http://www.turnersrest.com The UK

 

Jimmy Clewes Metallic Cream Filler
By: jimmy clewes
September 07, 2015 · 2,496 views

Description

 

Woodturning with TIm Yoder- Banksia Pod Weed Pot with Inlay
By: woodturningwithtim1
September 03, 2015 · 6,231 views

Tim turns a pod from an Australian Banksia Pod Tree. This ornamental project is a great way to learn how to use inlay and add color to your piece.

 

Woodturning at 54a. #29 An Inlay box
By: Keith Barrow
August 24, 2015 · 2,085 views

 

Permanent Markers and India Ink on a Wood Turned Plate
By: SP Wood Art
August 19, 2015 · 7,589 views

The basic steps involved in wood turning a plate. Additionally, adding color to wood turnings using permanent markers and India ink.

 

How To Turn Wood White
By: Fiaschetti Woodworking
August 11, 2015 · 19,255 views

Please visit my new website http://www.fiaschettiwoodworking.com/ In this video I show how I take a wenge bowl and some bleach and turn the brown streaks to white to make the wenge have black and white pinstripes. fiaschettiwoodworking@gmail.com

 

Updated - Embellishing your Woodturning - Piercing on the Cheap
By: DentonTurners
August 08, 2015 · 3,163 views

This is a re-post with the audio, hopefully corrected. There was an issue in the right audio channel on the first posting... This demonstration, Piercing On The Cheap, by Glynn Cox is not about actual piercing, which is like watching paint dry, it rather details a method of getting started in piercing for about 100 dollars. This is assuming you have an adequate air compressor. Glynn discusses the various types of piercing tools, their associated uses and drawbacks. Very high speed low cost dental type handpieces will be introduced illustrating their advantages and disadvantages. He builds a

 

Embellishing your Woodturning - Piercing on the Cheap
By: DentonTurners
August 05, 2015 · 11,816 views

This demonstration, Piercing On The Cheap, by Glynn Cox is not about actual piercing, which is like watching paint dry, it rather details a method of getting started in piercing for about 100 dollars. This is assuming you have an adequate air compressor. Glynn discusses the various types of piercing tools, their associated uses and drawbacks. Very high speed low cost dental type handpieces will be introduced illustrating their advantages and disadvantages. He builds a filter-regulator assembly, including tubing, gauge and valve options. This regulator can be used for introductory or profession

 

Banksia Seed Pod Inlay Project WOODTURNING with Sam Angelo
By: WYOMINGWOODTURNER
July 25, 2015 · 11,830 views

Sam Angelo turns a sphere from a Banksia Seed pod. He then inlays the surface voids with turquoise. The sphere sits on top of a turned base.

 

Marbling on Woodturned items
By: Walter Wager
July 23, 2015 · 22,267 views

Video shows how to marble on small woodturned ring boxes. This was my experience after watching Alan Lacer video https://www.youtube.com/watch?v 5m43OCJdjIo . I welcome advice from others who have tried marbling on wood.

 

Airbrushing a Winged Bowl ---Woodturning with Sam Angelo
By: WYOMINGWOODTURNER
July 22, 2015 · 7,996 views

Sam applies stain to a winged bowl- with an airbrush. He goes through the process of deciding which colors to use and where to apply each. (GREX compressor and airbrush in the spotlight).

 

#18 inlay bowl
By: Keith Barrow
July 07, 2015 · 3,580 views

A plain bowl with a bit extra

 

Cabachons and Conchos: Inlays for woodurning
By: WYOMINGWOODTURNER
June 26, 2015 · 8,815 views

Sam presents a unique turning approach for a clear cabochon inlay. He first turns a recess then textures and colors the wood so it is seen through the clear glass cabochon.

 

Carving on a bowl Part 3, Adding the final touches
By: H F Bowern Designs - Harold Bowern
May 05, 2015 · 589 views

Well finally I have finished the mahogany bowl. I added a walnut inlay to the top and then sand it up and with several coats of Doctor's Workshop - Walnut Oil and wax. This was a humbling experience to try and figure out carving and then how to incorporate it on a bowl. What I have learned is I have a long way to go to becoming a carver and also one who can add carvings to turnings. Life is about new experiences and the learning will never stop. In my travels on researching carving on turnings, I found a great turner who also does carving. His name is Cyrus Fillmore. If you are interested in

 

#128 Purpurina - Glitter
By: Miguel Sanchez
April 28, 2015 · 10,517 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Un nuevo proyecto sencillo para añadirle algo mas a nuestras piezas, como siempre con materiales basicos y faciles de encontrar y con resultados bien aparentes. Espero que os guste http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Playing around with colored epoxy
By: Carl Jacobson
April 24, 2015 · 244,360 views

In this video I cover dyeing epoxy with food coloring, and answer questions about the camera boom. Sarah & Charley @ Slowvanah Farms https://www.youtube.com/channel/UCI8ZXD9_g7DmkVnLh6yyLKw Almost one million views https://www.youtube.com/watch?v rR68KuJq4t8 Tools and Supplies I use in my shop: ------------------------ Lathe Robust: http://www.turnrobust.com/ Easy Wood Tools: http://www.easywoodtools.com/ Thompson Lathe Tools: http://thompsonlathetools.com/ Howard beeswax: http://amzn.to/2zAv185 Band saw: http://amzn.to/2AlMUEP Spindle sander: http://amzn.to/2zjIf6e Air saw: http://amzn.to

 

DAW Spiral Carving
By: Roger Meeker
April 20, 2015 · 381 views

Detroit Area Woodturners presents Jim Scarsella and Alfred Schembri demonstrating tips and techniques on spiral carving.

 

#126 Negro y Oro - Black and Gold
By: Miguel Sanchez
April 14, 2015 · 13,415 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez A veces sentimos la necesidad de añadirle algo a una pieza, quizas esto os sirva de inspiracion. Espero que os guste http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Carving on a bowl, Part 2 Carving and texturing
By: H F Bowern Designs - Harold Bowern
April 08, 2015 · 1,511 views

In this episode of carving on a bowl, I take the bowl from where we had left it and do some addition carving and texturing to the bottom and top sections of the spaceship like bowl. I discuss some good resources for anyone interested in taking up carving or that are interested in just see what it is all about. Also, I show the use of a 'Lathe Chuck/Face-Plate Adapter' that allows you to mount your woodturning onto a carving vise or, as in my case, directly to the banjo of the lathe. This device allows you to carve your turning without taking the turning off the chuck. I got mine from Lee Va

 

Made-By Medallions
By: Ron Brown
April 04, 2015 · 1,845 views

New Product Introduction. Ron announces the availability of wooden laser engraved medallions to identify your hand crafted items containing your contact information.

 

Milk Paint on a Maple Bowl Video 2
By: Adze Woodturning
March 27, 2015 · 2,117 views

In this second video I prep two bowls for the second coat of milk paint and finish one bowl with Danish OIl and the other with Captain Eddie's Shine Juice. I think with more experimentation I could get some nice effects with Milk paint. Thanks for watching.

 

Carving on a bowl, Part 1 Bowl preparation
By: H F Bowern Designs - Harold Bowern
March 27, 2015 · 1,028 views

Well it's been longer than a week, but after 2 1//2 months I am going back to the workshop. This week I am going to get a bowl ready for some carving. I have a great book by Chris Pye entitled ' Carving on Turning' which shows you how to add a carving element to your turning. Also in the March 2015 'Woodturning' magazine from the UK, Neil Scobie has an article on 'Making Texture Rim Bowls' from which I took the shape of my project. So off we go, using a 9' round x 2 7/8' deep Mahogany bowl blank to make the bowl. As sometimes happens, a design change enters the picture, but I manage to ge

 

Milk Paint on a Maple Bowl; Video 1
By: Adze Woodturning
March 19, 2015 · 714 views

Experimenting with carving and milk paint on an Ambrosia Maple bowl. Video 1

 

Woodturning - Colouring a Bowl
By: Kim Gowney
March 09, 2015 · 10,010 views

Colouring the inside of an Ash bowl Two images of the bowl coloured but not lacquered can be seen at the link below http://kimswoodart.blogspot.co.uk/2015/03/colour-demo-video.html New images of the completed bowl: http://kimswoodart.blogspot.co.uk/2015/03/colour-complete.html

 

Wood turned Art-preparing the canvas (part 1)
By: WYOMINGWOODTURNER
January 29, 2015 · 5,170 views

In part 1 Sam prepares the front of a display piece with some good close-up shots. He creates some turned sculpture that will be colored, textured, and embellished with metal leaf. Part 2 will follow

 

Decorative Element for your Project: woodturning
By: WYOMINGWOODTURNER
January 01, 2015 · 4,442 views

Sam shows the steps and process for adding a decorative center band to a lidded box. Happy New Year 2015

 

Seasonal Turning and Carving Part 2 - Les Casteel
By: Woodturners of Southwest Missouri
November 26, 2014 · 1,038 views

In part two of this two part video Les shares with us the tools that he uses and also uses them through carving, coloring and finishing. He shares which tools he likes best and where to start inexpensively with Flexcut carving tools as well as how to sharpen them without spending a ton of money. Les is one of our members of the Woodturners of Southwest Missouri. Visit us at www.woodturnersofswmo.org Check out his website at Woodthatrocks.com

 

Seasonal Turning and Carving Part 1 - Les Casteel
By: Woodturners of Southwest Missouri
November 26, 2014 · 1,449 views

In part one of this two part video Les shares with us how he approaches the holiday season by preparing many of his items earlier in the year. By planning this way, he has blanks ready for carving during the cooler months and reduces the dust while still having plenty to do in the shop. He demonstrates in part 1 how he turns and preps the other blanks. Part 2 is where Les shows us his carving tools and demonstrates the carving and discusses more in depth the coloring and finishing of these pieces. Les is one of our members of the Woodturners of Southwest Missouri. Visit us at www.woodturnersofswmo.org Check out Les' website at Woodthatrocks.com

 

Wood Turning a Christmas Bauble Decoration
By: Martin's Bazaar
October 17, 2014 · 1,824 views

In this week's video, in the new workshop, I produce a jolly little Christmas Bauble that would look gorgeous on anyone's tree this year. I know it is early, but you've got to be prepared for the season of jollity and good will. The item you saw made in this video may well be available fir purchase on my website http://www.martinsbazaar.co.uk or my Etsy shop at http://www.etsy.com/shop/martinsbazaar. Enjoy the video! Big Thanks to My Top 3 Fans This Week: #1 - Jenni 'Purple' Kenyon Jenni is an avid supporter, commenter and liker of my Facebook page and is a cracking accountant to go with

 

Preparing an inlay for a Lidded Box: woodturning
By: WYOMINGWOODTURNER
September 27, 2014 · 2,459 views

Sam demonstrates how to cut an inlay or insert for a lidded box. He shows how considering grain orientation will result two different types of 'figure.'

 

Wood turning, Spiralling and decorating with Nick Agar by Robert Sorby
By: Robert Sorby
September 26, 2014 · 106,110 views

Welcome to the new decorating video from Robert Sorby. These beautifully decorated items were produced by guest presenter the renown wood turning artist Nick Agar using the original high quality full size and micro Spiralling and Texturing tools from Robert Sorby. If you would like to produce your own version of Nicks stunning Viking sunset bowl or just decorate your own turned pieces then watch this video to learn the various techniques that he uses.

 

Inlay for a Lidded box: Woodturning
By: WYOMINGWOODTURNER
September 25, 2014 · 20,930 views

Sam Angelo demonstrates the process for inlaying a contrasting wood into the lid of a turned box. A cocobolo inlay is used in a Big Leaf Maple box.

 

Knurling Sampler With Ron Brown
By: Ron Brown
September 22, 2014 · 2,515 views

Texturing turned items with a woodturning Knurling tool; tops, acorn boxes, lidded boxes, etc. A sampler of a few items easily decorated with this type of tool. More info: www.ronbrownsbest.com

 

Bowl Tinted Epoxy Repair Part 3/3
By: John Bare
September 10, 2014 · 171 views

Final Video of repair of a hole through the side of the bowl with Tinted Epoxy

 

Bowl Tinted Epoxy Repair Part 2/3
By: John Bare
September 08, 2014 · 664 views

Part two of filling a void in a cherry bowl with two part epoxy and dye

 

Bowl Repair Tinted Epoxy Part 1/3
By: John Bare
September 07, 2014 · 218 views

Repair of a natural hole in the side of a Cherry Bowl with 2 part Epoxy

 

Applying Copper Leaf to a Wood Vase Turned on the Lath
By: Roger Scott
August 11, 2014 · 36,366 views

This video gives you step by step instructions on how to apply metal leaf to an item made on the wood lathe. Please subscribe to help me get to 1000 subscribers. Thanks.

 

Woodturning Metal Inlay Experiment
By: Custom Chris
August 04, 2014 · 19,223 views

I had idea on how to do a metal inlay in any wood project I changed my mine on the plate after I shaped it

 

The Twist Inlay Experiment (sawdust rd. woodshop)
By: Johnny Boudreau
July 02, 2014 · 299 views

Maple bottle with Mahogany inlay. I wanted to try the twisted inlay that OzWorkshop had posted a while ago. Didn't get it as perfect as his, but good enough for my first attempt. I might try doing the lines a little fatter next time tho, get a less subtle look. Thanks for watching. OzWorkshop : A twisted design pen http://youtu.be/d4RuZp97w3Q Rusty Guitar: https://www.youtube.com/channel/UCdI608okmTH4hkw3b30MBsQ/videos

 

# 226 Disc decoration
By: Cap'n Eddie Castelin
May 27, 2014 · 8,553 views

This video is about the disc we turned last week, this is how I finished it.

 

Gold Filled Engraving on Wood by Cindy Drozda
By: Cindy Drozda
May 01, 2014 · 9,352 views

Here is my method for Gold Filled Engraving on wood. This is how I sign my turnings. This technique can also be used for many other types of decoration on wood or metal. You can find the Gold Engraving Filler sticks on my website at http://www.cindydrozda.com, where you will also find my Artwork, Instructional DVDs, Signature Woodturning Tools, and other Woodturning supplies. Comments are always welcome!

 

Turquoise Inlay Part 2
By: WildWood Design
March 18, 2014 · 60,027 views

How to inlay crushed turquoise in your wood working projects.

 

Crushed Turquoise Inlay Part 1
By: WildWood Design
March 16, 2014 · 112,778 views

How to inlay crushed turquoise in your wood working projects.

 

Neil Turner Artisan..embellishing Coral Bowl
By: Neil Turner Artisan
February 12, 2014 · 929 views

Neil Turner Artisan..woodturner, sculptor, bespoke furniture maker, starting on the long process to embellish with coral texture a she oak platter... this process has taken 24 hours to draw top and bottom of the platter. Hundreds of hours will be taken on this piece for the second art work for an exhibition at Linton & Kay Galleries Perth.

 

#71 Insertos en nacar - band inlay
By: Miguel Sanchez
January 14, 2014 · 12,376 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Un proyecto sencillo para insertar bandas de simil nacar en nuestras piezas torneadas Espero que os guste. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

The Art of Zentangle and its use in Embellishing Wood Turning
By: DentonTurners
January 07, 2014 · 24,319 views

The Zentangle Method is an easy-to-learn, relaxing, and fun way to create beautiful images by drawing structured patterns. Susan Thillen discusses the art of Zentangle. Susan is a certified Zentangle instructor and walks us through a description of Zentangle and some of the basic figures and patterns. We, as wood turners, have been doing more and more embellishment of our turnings after they come off the lathe. This is another technique that can be applied to enhance and beautify our craft. This was recorded January 6, 2014 at the monthly meeting of the Golden Triangle Woodturners in Denton, Texas. We meet the first Monday of each month at the Center for the Visual Arts located at Hickory and Bell streets in Denton, Texas. Meetings start at 7PM and all are welcome to attend. http://www.goldentrianglewoodturners.org http://www.zentangle.com

 

Woodturning & Paint Madera en Torno & Pintura! Carmen De La Paz
By: carmendelapaz
January 06, 2014 · 393 views

Carmen De La Paz shares 'the making of' process of a piece from inception by woodturning on a lathe and the decorative paint application. www.carmendelapaz.com Made using Flipagram

 

Crushing Turquoise---a better way
By: WYOMINGWOODTURNER
December 09, 2013 · 29,124 views

With a good idea from a viewer, Sam shows a better way to crush Turquoise stone.

 

TURQUOISE Stone INLAY for Wood Projects
By: WYOMINGWOODTURNER
December 02, 2013 · 108,410 views

Sam Angelo demonstrates his procedure for inlaying turquoise stone into a turned art piece. This is the second part of two videos dealing with processing turquoise stone and integrating it into a project.

 

TURQUOISE PROCESSING Stone for Inlay work
By: WYOMINGWOODTURNER
December 02, 2013 · 10,295 views

Sam covers his process for breaking up turquoise stone and separating it into various sizes. He shows different strainers and techniques for processing turquoise bought off the internet as well as jewelry which contains the stone.

 

WGNC Demo: Trent Bosch (2 of 2) carves up a platter Oct. 10, 2013
By: weekendturner.com
October 23, 2013 · 11,395 views

WGNC brought in Colorado artist Trent Bosch to demonstrate his turning and carving techniques at the Oct. 10, 2013 meeting of the Woodturners Guild of North Carolina at the NC State Crafts Center in Raleigh. The free public demo was followed by three days of paid private workshops for some of our members. This shorter segment shows him demonstrating his on his sunburst carved platter. There is also a bonus clip where Trent describes in detail the secret behind his famous 'Vessels of Illusion.' The event ran too long for one YouTube clip, so a separate 2-hour segment covers his hollow-form presentation as 'Part 1.'

 

WGNC Demo: Trent Bosch (1of 2) carves it up Oct. 10, 2013
By: weekendturner.com
October 23, 2013 · 25,961 views

WGNC brought in Colorado artist Trent Bosch to demonstrate his turning and carving techniques at the Oct. 10, 2013 meeting of the Woodturners Guild of North Carolina at the NC State Crafts Center in Raleigh. The free public demo was followed by three days of paid private workshops for some of our members. This event ran too long for one YouTube clip, so this 2-hour segment covers his hollow-form presentation. Another shorter segment will focus on his sunburst carved platter. Trent really put our cameraman through his paces for this event, and the camera itself was suffering from some auto-focus issues so I apologize in advance for the 'fuzzy' sections.

 

# 198 Surface Enhancements
By: Cap'n Eddie Castelin
October 21, 2013 · 11,160 views

Small things that make big differences in the appearance of your work. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

Texturing Made Easy DVD Preview
By: Ron Brown
September 13, 2013 · 1,190 views

Preview of Ron Brown's new DVD release, Texturing side grain with burr type cutters, knurling type cutters and new chatter tool methods for endgrain. Not the whole video, just a preview.

 

Stone Inlay
By: Carl Jacobson
August 16, 2013 · 21,886 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. I made a frame and inlaid a stone in it. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

SPP Usage 10 Mosaic Decorations
By: William Kandler
June 01, 2013 · 2,368 views

How to create/modify mosaic designs in your segmented turning project with the Segmented Project Planner

 

SPP Usage 9 You Create a Decoration
By: William Kandler
June 01, 2013 · 2,011 views

How to use some other kind of complex segment in your segmented turning project with the Segmented Project Planner

 

Metal Inlay Techniques for Woodturning and Woodworking by Ted Sokolowski (woodturning DVD preview)
By: Craft Supplies USA
March 28, 2013 · 23,580 views

Learn how to add value and beauty to your woodturnings with Ted Sokolowski's DVD. Buy now: https://www.woodturnerscatalog.com/p/99/5824/Sokolowski-Studios-Metal-Inlay-Techniques-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA This entertaining DVD teaches you how to successfully inlay metal powders in your custom woodturnings to create a one-of-a-kind piece that's sure to draw attention. Ted shares his best secrets for success with his signature techniques and clear concise instruction. DVD 69

 

Millefoglie
By: Livio Maritati
February 16, 2013 · 75,895 views

Come decorare una ciotola con inserti a forma di foglia

 

Paints in Woodturning pieces
By: Paolo Ceresi
February 09, 2013 · 165 views

What Wood Could Show us. BossoWood Olive Wood Elm Yew Box Elder Sugar maple Cupressus Arizonica Italian Walnut

 

DIY LED Lights For Woodturning
By: As Wood Turns
January 04, 2013 · 16,743 views

http://www.AsWoodTurns.com Specifics on the light: JANSJÖ LED work lamp, black 9.99 Article Number: 201.696.58 Per IKEA.com Harbor Freight 50mm magnet Item # 96651 3.99 A DIY project to provide LED light to my wood lathe. The LED's were purchased from Ikea; The magnet was purchased from Harbor Freight. I woodturned small bases to hold the light and the magnet. Both were turned from scrap offcuts: one is russian olive, the other is aspen. Before turning, I drilled holes to match the bottom of the LED light. Then the bottoms were turned first to make a recess for the magnet and recess to use to remount onto a chuck. They are finished with a mix of mineral oil and beeswax. Tools used were a bowl gouge and a bedan. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

Metal InlayTechniques for Woodturning & Woodworking with Ted Sokolowski - DVD Trailer
By: Ted Sokolowski
January 02, 2013 · 30,489 views

Trailer for Ted Sokolowski's DVD on Metal Inlay Techniques for Woodturning & Woodworking. Inlay copper, brass, bronze, aluminum or tin into wood projects for a unique look on what otherwise may be considered blemished wood.

 

WGNC Demo: Al Stirt carved square platters
By: weekendturner.com
October 17, 2012 · 21,547 views

Premier woodturning artist Al Sirt of Vermont demonstrates his techniques for creating square and carved platters at the October 11, 2012 meeting of WoodturnersGuild.com of North Carolina.

 

Painting with Stone
By: turnersgold
October 16, 2012 · 4,428 views

A Turner's Gold, Wood Works and Arts presents, all the techniques used in creating highly decorative wall paintings using Stone Inlay and Ink Wash. Music was courtesy of Tristan Harvey of 'Harvey\Kolter/& Moseley. check them out on Facebook by following the link below. http://www.facebook.com/theillestcosby?ref ts&fref ts

 

Chatter Tool Methods Update
By: Ron Brown
August 14, 2012 · 5,888 views

I have updated my very successful video 'Chatter Tool Methods - A Complete Course'. Here is the update.

 

The Basics of Stone Inlay
By: turnersgold
July 24, 2012 · 132,841 views

'A Turner's Gold, Wood Works and Arts' presents to you, the basic techniques for inlaying stone bands into wood working. In this video, I will show you how I go about inlaying basic stone bands into a Black walnut bracelet on the wood lathe.

 

Using a rotary table on woodturnings-Introduction
By: SegmentedTurner
March 29, 2012 · 10,690 views

I describe the use of a rotary table to produce detail carving on a woodturning.

 

Water Colors
By: Cap'n Eddie Castelin
February 18, 2012 · 6,829 views

Adding some color to your work, right from the kitchen.

 

Brian McEvoy's Secrets to Woodburning, Airbrushing, Texturing and Piercing Embellishment
By: Craft Supplies USA
December 05, 2011 · 8,383 views

A preview of Brian McEvoy's Woodturning DVD. Buy now: https://www.woodturnerscatalog.com/p/99/4821/Brian-McEvoy-Secrets-to-Woodburning-Airbrushing-Texturing-%26-Piercing-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Brian McEvoy takes you step-by-step through four different embellishing techniques including woodburning, airbrushing, texturing, and piercing. With Brian's detailed instructions, you'll be decorating your woodturnings in no time. 2 Disc set. 240 minutes. Craft Supplies USA (The

 

Woodturning Inlay Turning shapes on the lathe to inlay
By: Carl Jacobson
November 02, 2011 · 9,488 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. In this video I use the spindle gouge and a thin parting to create shapes to inlay. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Adding a special detail to a turned wood bowl with my small tool
By: SegmentedTurner
August 02, 2011 · 9,891 views

I show how I add a thin-walled recess to a turning using my small tool.

 

How to color wood (Woodturning Tips and Techniques)
By: Craft Supplies USA
March 11, 2011 · 98,172 views

In this woodturning tutorial, learn how to color your woodturning projects with dye. Buy now: https://www.woodturnerscatalog.com/p/148/6187/Artisan-Premium-Coloring-Dye?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Coloring woodturnings is becoming very popular and is found frequently on all levels of woodturning. Our Artisan dyes are pre-mixed alcohol based aniline dyes that offer limitless possibilities for changing the color of a turned piece. Adding color to your work can produce dramatic res

 

Wood Turning - Chattering Techniques
By: Brendan Stemp
February 16, 2011 · 47,704 views

Award winning Wood Turner Brendan Stemp shows you several simple effective chattering techniques with purchased and home made tools. Join my Facebook http://www.facebook.com/#!/pages/Brendan-Stemp-Wood-Turni... www.brendanstemp.com.au Check out my website for examples and purchasing my work.

 

Woodturning Copper Inlay Maple Box
By: Carl Jacobson
January 27, 2011 · 40,769 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. In this video I did some copper inlay on the lid of a Maple box. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Woodturning - decoration post
By: teksu313
December 08, 2010 · 3,401 views

Sorry, sounds is messed up and video quality is bad. I'm turning decoration post for a little chest of drawers. Ends is left square so I could saw 1/4 off to fit the post to the corner of the chest. Ends are then cut off.

 

Stone Inlay in Woodturning
By: popsshed
August 15, 2010 · 355,345 views

A Pop's Shed video on Stone Inlay in Woodturning

 

Woodturning Projects Turning a Captured Ring
By: Carl Jacobson
July 16, 2010 · 13,826 views

http://theturningshop.blogspot.com/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects with Carl Jacobson. Wood turning basics on a Lathe with basic wood turning tools. Taking you from start to finish with a ruff piece of wood to your sanded and finished project with paste wax and mineral oil for a superb finish. Turning a captured ring on the lathe. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Excerpt Chatter Work Complete Course Fancy Tops 4710.mpg
By: Ron Brown
April 07, 2010 · 10,206 views

An excerpt showing beautiful chatter work spinning tops in the Bonnie Klein Style. Taken from a newly released DVD, you will be inspired to create these beautiful small tops. Mainly a video photo album, you won't see techniques in this clip. You will see a great collection of inspired easy to make tops universally loved by kids of all ages from 3 to 103. Enjoy.

 

wireburning.avi
By: Cap'n Eddie Castelin
February 23, 2010 · 7,642 views

Add some lines of distinction to your work with an EC wire burner you make yourself. It's Easy- Watch!

 

Surface Enhancements Part One - Preparation
By: SegmentedTurner
December 31, 2009 · 4,266 views

This shows the preparation necessary for adding acrylics to a carved and burned section of a woodturning. Part two will show the final steps. For more information about my work please visit my web site at http://www.DWMontville.com.

 

Return to Turning Videos

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Hunter Woodturning Tools
The Studios' of Bradley R.M.
Woodturning Tool Store

(Click any Ad to go to our Sponsor's Website)