Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Metal Spinning Videos (5)

Sort by

Or click here to: Search All Videos


James Thurman - Metal Spinning - Part 1
By: DentonTurners
February 08, 2019 · 925 views

James Thurman - Metal Spinning on the Lathe Part 1 - Introduction, tools, annealing, and basic technique Part 2 - More spinning techniques and metal finishing James Thurman is an Associate Professor at the University of North Texas’ College of Visual Arts & Design, where he is faculty in both 3D Foundations and Metalsmithing/Jewelry. A highly active studio artist for nearly twenty years, his work has been included in hundreds of national and international curated and juried exhibitions as well as ten solo exhibitions in the past ten years. James has been incorporating handspun metal compo

 

James Thurman - Metal Spinning - Part 2
By: DentonTurners
February 08, 2019 · 692 views

James Thurman - Metal Spinning on the Lathe Part 1 - Introduction, tools, annealing, and basic technique Part 2 - More spinning techniques and metal finishing James Thurman is an Associate Professor at the University of North Texas’ College of Visual Arts & Design, where he is faculty in both 3D Foundations and Metalsmithing/Jewelry. A highly active studio artist for nearly twenty years, his work has been included in hundreds of national and international curated and juried exhibitions as well as ten solo exhibitions in the past ten years. James has been incorporating handspun metal compo

 

Meatl Spinning with home made tools 1
By: DIY with Uncle Cy
December 26, 2016 · 31,642 views

At last Metal spinning. Not real successful at it but it does work. Could use some pointers from people with experience at this, so far everything I have made and done has been gleaned from watching videos.I have no teachers for this so it is all experimental and as it turns out the learning curve is pretty steep.

 

Making Metal Spinning Tools Pt2
By: DIY with Uncle Cy
December 17, 2016 · 4,718 views

Here we go with the trimming tool (cutter) and a beading tool. Plus I will make a form to shape the metal on. Next one we're spinning metal.

 

Making Metal Spinning tools Pt 1
By: DIY with Uncle Cy
December 10, 2016 · 11,474 views

For a long time now I have wanted to try my hand at metal spinning. So I have finally decided to attempt make myself the basic tools for the process and give it a shot.I have very limited machining experience and NO metal spinning experience so all of this is purely experimental. I hope you enjoy (and possibly learn along with me in) this new series of videos. In this Part 1 video I will make the roller former. Later will be a trimming tool and beading tool, and finally a form and a metal spinning project. Feel free to comment and post questions I will answer any that I can. Thanks for watching.

 

Return to Turning Videos

Great Bargains
(ends April 25, 2019)


Square Mini Ergonomic Carbide Turning Tool

On Sale for only $49.99

Save $30.00

List price: $79.99

This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Click here for more information or to purchase

 


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase

 


Rockler Four-Piece Cheese Knife Turning Kit

7/8" On Sale for only $29.99

1 1/4" On Sale for only $39.99

Save $10.00

List Price: $39.99

The cheese cutters are made from food-grade 304 stainless steel and attached to the handles which you turn. The kit includes 1/4-20 threaded inserts. The cheese cutters themselves are dishwasher safe; the handles are easily removed for this purpose.

Click here for more information or to purchase


GVS Elipse P100 Half Mask Respirator with 2 Bonus Filters, Small/Medium

For only $25.99

Save $11.99

List Price: $37.98

These Elipse P100 Half-Mask Respirators from GVS are designed to protect against dust particles, metal fumes, mists, oil and water vapors, and even some micro-organisms. Each mask includes two low-profile filters, which permit a wide field of view, and won't interfere with safety glasses and sanding shields. The filters are easily interchangeable, and replacement filters are readily available.

Click here for more information or to purchase


Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat

For only $32.74

Save $13.70

List Price: $46.44

Shell offers built-in chin protection and extended top-of-head coverage. Highly adjustable headgear tilts visor nearer or farther from face depending on preference and application. Comfortable cell foam on back of headgear. Breathable, removable, washable headband. Comfortably worn with most goggles and respirators.

Click here for more information or to purchase


4-Piece Safety Kit

For only $19.99

Save $15.00

List Price: $34.99

Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Ideal for table saw and router table use. Angled push blocks feature ultra-grippy Bench Cookie pad material. They are great for jointer and router table applications. Table featherboard assists in holding stock against the fence while sawing or routing and helps to reduce kickback. It fits standard 3/4" x 3/8" miter slots found on table saws and router tables, and features expandable miter track bars for maximum holding power.

Click here for more information or to purchase


Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Hunter Woodturning Tools
Stainless Steel Bottle Stoppers
Cindy Drozda

(Click any Ad to go to our Sponsor's Website)