Woodturning Online Videos

Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Bracelets Videos (56)

Sort by

Or click here to: Search All Videos

Segmented Bracelet Made From 200 Pieces Of Wood
By: Kyle Toth
February 07, 2019 · 22,750 views

Its segmented bracelet is made of 200 pieces of ash, bocote and and ebony. The bracelet did end up fitting on to Hayleys wrist, the finish needed to dry a little bit longer. I took my segmented rings and attached them to a piece of plywood with hot melt glue and resawed them on the table saw to make multiple thin rings. Hope you enjoyed! - Toth If you would like to support my journey and help me make more videos like this check out my Patreon https://www.patreon.com/woodbytoth Formbys Tung Oil: https://amzn.to/2SOe5k9 Hot Melt Glue Gun: https://amzn.to/2HWLQPC Glue Sticks: https://amzn.to/2t


# 333 More bracelets
By: Eddie Castelin
January 02, 2019 · 2,031 views

A couple of basic tips and hints on tools for making wood art.


# 331 Bracelet
By: Eddie Castelin
December 30, 2018 · 3,748 views

A couple of basic tips and hints on tools for making bracelets, go for the points.


# 330 Bling II
By: Eddie Castelin
December 19, 2018 · 2,177 views

second part on bracelets, coming soon, bracelet with no hardware.


#329 Bling
By: Eddie Castelin
December 18, 2018 · 2,586 views

Making a bracelet, part one of two, or more.


Wood Turning at Home - Rainbow Stained Bangles
By: caitlan the cat
September 30, 2018 · 1,953 views

This weeks Wood Turning was to make some bangles which I coloured with Chestnut Rainbow Stains. I made a red, blue and green one then finished them by polishing and buffing them up to give a glass like finish to them. They were a really fun to make and kept me turning well into the night. I turn at home outside as I do not have a workshop or inside space so as you will see I have had to buy a light so I can keep going.


Making a Bracelet
By: Lee Burkholder
August 05, 2018 · 257 views

Cumberland Valley Wood Turners, lathe, wood turning, wood working, making a wooden bracelet, wooden bracelet, turning a bracelet


Making a Wooden Bracelet
By: BK Wood
July 06, 2018 · 72 views

Making a wooden bracelet Thank You Captain Awesome for recommending this video! Visit my Patreon: https://www.patreon.com/BKWOOD/overview Visit my site: https://bkwoodenterprises.wordpress.com Visit my Instagram: https://www.instagram.com/bk_wood_bre...


Dizzy Project - Part 4 - Production of a Bangle Bracelet
By: SIS Woodworking
May 13, 2018 · 522 views

This is part 4 of the series on Dizzy Projects produced with the Accu-Slice System. From the left over pieces from the Dizzy Bowl and Dizzy Egg Projects, I was able to produce a Dizzy Bangle Bracelet, two small Dizzy Bowls and 2 small Dizzy Thimbles. The Dizzy Bracelet contains 9 layers of the laminated discs. Each of the laminbaed discs was rotated 5 degrees to produce the dizzy pattern.


Beaded bracelet
By: Woodturning by Alan Scannell
April 10, 2018 · 171 views

A beaded bracelet i made for my dad. Made from mahogany and an old leather belt. Music by: Landras Dream by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com


Wood Bracelet / Wood Texturing / Wood Dying / Woodturning
By: Carl Jacobson
March 16, 2018 · 8,496 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg Don from Chroma Craft sent me some wood dye pens to try out. The bracelet is Maple and about 3'. I beaded it with a 3/16' D-Way beading tool and textured it with a Robert Sorby micro spiral/detail tool. The wood dye pens are made by Chroma Craft and come in a variety of colors. Chroma Craft: https://www.chroma-craft.com/ Nick Agar: http://www.turningintoart.com/index.php Carolina Shoe: https://www.carolinashoe.com/Products?page 1&gender Mens&sorting Popularity Use Carolina10 at checkout for a di


Beautiful Braclets from the lathe
By: Windy City Woodturners
January 15, 2018 · 399 views

Tim Voss, of the Illiana Woodturners, demonstrates the processes invovled in turning simple and more complexed brackets. Veneers, colored epoxy, glitter and inlays are discussed. Tim has taken classes at Mark Adams and with Binh Pho.


Segmented wood Bangle Restoration
By: Gabe Castro
June 14, 2017 · 57 views

Restoration project, Segmented Wood Bangle On Mini Lathe. Please Subscribe. Click link to buy 4 Jaw Chuck System: http://amzn.to/2xTgeon Click link for Mini Lathe: http://amzn.to/2yzlyMs


Motherrs Day Bracelet
By: AJY Wooden-Stuff
May 07, 2017 · 115 views

Gidgee and Milliput Bracelet happy Mothers day


Houn Pine Bracelet
By: AJY Wooden-Stuff
April 14, 2017 · 246 views

Houn Pine with Milliput Bracelet


Making a bangle from melted Lego blocks !!
By: Templeboy Turnings
April 09, 2017 · 3,575 views

In this video I melt some Lego blocks in an oven and make a wrist bangle for my 7 year old daughter. Using the melted block of Lego I put it on my wood lathe and turn the bangle on a live YouTube show. This is the fully edited version of that live show. For any information or to follow me on social media please click any of the following links..... Templeboy Turnings Web site and shop :- http://templeboyturnings.com/ Templeboy Turnings Facebook page :- https://www.facebook.com/TempleboyTur... Templeboy Turnings Twitter :- https://twitter.com/TempleboyTurnin Templeboy Turnings Instagram :- https://www.instagram.com/templeboytu... Templeboy Turnings patreon :- PLEASE SUPPORT MY CHANNEL HERE https://www.patreon.com/Templeboyturner My Webpage www.templeboyturnings.com Thank you for watching, Please like, share, comment and subscribe. Please Stay safe, Regards, Steve (AKA The Templeboy Turner)


How to turn Wood Bangle on mini lathe
By: Gabe Castro
March 09, 2017 · 1,782 views

Spalted Maple Bangle made on mini lathe using only 1/8 inch parting tool and 4 jaw chuck. Click link to buy 4 Jaw Chuck System: http://amzn.to/2xTgeon Click link to buy Mini Lathe: http://amzn.to/2yzlyMs


Brazalete de Nogal para Paula
By: Daniel Vilarino
December 29, 2016 · 4,404 views

Hola/Hi! ***This video is in Spanish. If you prefer to watch it in English, please click in the following link:*** https://youtu.be/qeOJHUGXV2U Este video está en Español. En este video realizo un brazalete de nogal para Paula, con un trocito de nogal que me había sobrado de otro proyecto. ***In this video I make a walnut bangle for Paula with a small piece of walnut remainder of another project.*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this video and if that was the case, pl


Walnut Bangle for Paula
By: Daniel Vilarino
December 29, 2016 · 1,074 views

Hola/Hi! Este video está en Inglés. Si prefieres verlo en Español, por favor, haz un click en el siguiente enlace: https://youtu.be/sDfiwbMw33k ***This video is in English*** En este video realizo un brazalete de nogal para Paula, con un trocito de nogal que me había sobrado de otro proyecto. ***In this video I make a walnut bangle for Paula with a small piece of walnut remainder of another project.*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this video and if that was the case,


szegmentált karkötő
By: Szabó Janó
November 06, 2016 · 1,995 views

segment bracelet


How to Make a Bent Wood Bangle Cuff
By: Zebrano Wood Craft
April 18, 2016 · 100,684 views

How to make a bent wood bangle cuff. In this video I show my process for making bent wood bangle bracelets by hand. To create the bangle I used American Walnut veneer and super glue. The finish I used was Tru Oil Gun Stock Finish. 'Danger Storm' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0


Woodturning A Compact Disc Bangle for my Daughter....and a serious question for my Subscribers?
By: Templeboy Turnings
April 05, 2016 · 7,022 views

In this video I Turn 18 compact discs into a bangle for my daughter, and I experiment with adding colour. I Also I have a very serious question to ask my subscribers to help me come to a decision about a video I have been asked to make....... Title music by Paul Mooney check out his Facebook page and feel fee to message him !! https://www.facebook.com/profile.php?id 100007379238948&fref ts Thank you for watching, please like, share and comment with some constructive feed back on my videos, so I can produce a channel to your liking. If you haven't already, I'd appreciate your subscribing. Thank you, and take care, Steve AKA The Templeboy turner !!


HDPE Bracelet
By: Peter Stewart
March 18, 2016 · 5,780 views

This week I turned down one of the HDPE blanks I made last in last week's video. See how I made the blanks: https://www.youtube.com/watch?v mjJsi8MAhEE ----------------------------------------­­­­---------- My website: www.peterturnswood.com ----------------------------------------­­­­­­- To see my vlog and follow-up channel, go to my main channel by clicking 'Peter Matthew' up above. On my main channel, look to the right side of the screen where it says 'Featured Channels'. Under 'Featured Channels' is 'Peter Matthew 2'. Click that and subscribe to that channel :) ---------------------------


Turning A Bracelet
By: Gord Rock
March 04, 2016 · 5,942 views

One of many ways to turn a bracelet.


Braccialetto 2 - Bracelet on the lathe 2
By: Mauro il tornitore
October 10, 2015 · 664 views

Un braccialetto multilegno al tornio. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro A manywood bracelet on the lathe. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro


Woodturning with Tim Yoder-Bracelet
By: woodturningwithtim1
September 29, 2015 · 3,491 views

Tim puts his lathe's step jaws to work to turn a bracelet. This project is actually part of a kit, but well machined and you can use unusual woods (and plastics) to create great looking jewelry. Almost as fun, the finish is cyanoacrylate (super glue)!


72 Pieces Bracelet
By: PeteTGIF
June 04, 2015 · 1,807 views

After two weeks of preparing, I finally managed to turn a bracelet. 72 Pieces segmented turning with an awesome result! Thanks to my supporters! ------------------------------------------------- Visit my website: http://www.thankgoditsfriday.de/html/en.html -- Under constant construction -- Find me on Facebook: https://www.facebook.com/tgif1608 ------------------------------------------------ Download free plans on my homepage: http://www.thankgoditsfriday.de/html/downloads_en.html ------------------------------------------------ If you like to support the project PeteTGIF you can send me some


Woodturning - bracelet
By: Thomas Anton Geurts
May 04, 2015 · 389,478 views

Turning a bracelet from padauk,maple and walnut. Etsy shop https://www.etsy.com/shop/TAGwoodworking?ref hdr_shop_menu https://www.facebook.com/pages/TAG-woodworking/139507322728920 My website https://www.tagwoodworking.com Music: 0.00 - 7:45 - Violeta Pivnkakkara, 2 forest mixtape 7.45 - 22:31 - Organic meditations one My other channel: https://www.youtube.com/channel/UCRHWBmZAmnfS2TghE79xciw


Turning a Wood Bracelet aka Bangle
By: Woodturners of Southwest Missouri
February 02, 2015 · 15,904 views

Rob Davis our chapter librarian, shares with us how he turns wood bracelets or “Bangles.” This project came as a result of a larger project where he makes candelabra’s and uses the left over wood to turn these bracelets. This is a great beginner or intermediate turning project and one that you can produce something as a gift or to sell. Information on ordering a custom smock can be found at: http://themakeoverseamstress.blogspot.com


Wood turning Bracelets
By: Hendrik van Taak
October 24, 2014 · 20,521 views

Description: How to turn many bracelets in a safe way


PeterTGIF - Bangle Bowl 2014 Entry
By: PeteTGIF
October 24, 2014 · 662 views

This is my entry for the Bangle Bowl 2014. Thanks to Dominic Bender, I managed to make the deadline on this, as I didn't realized in the first place, that all entries must have been done by October, 22nd until 23:59 PM. Lucky for me, that I could get my entry-picture done right in time, I think there had been only 2 hours left. ------------------------------------------------- Please check out the Bangle Bowl 2014 and vote for your favourite entry: http://www.thewoodwhisperer.com/bangle-contest/ Please vote for mine as well, although there are some really beautiful pieces over there. Place you


Segmented bangle bracelet
By: Braxton Wirthlin
October 20, 2014 · 1,244 views

This is my entry for the Bangle Bowl 2014. It's my first time doing any segmented turning, and my first time turning a bangle. I could definitely use a chuck for my lathe but I worked around it. The bangle is maple segments with rose wood bands. Finished with OB's shine juice. Thanks to Zac Higgins, and Kyle Toth for putting on the contest. I had a great time turning this, and can't wait to do more. Bangle bowl 2014 video http://youtu.be/tz3NIiweYqI Zac's bangle video http://youtu.be/BNZgt7JWV7I Kyle's segmented how to http://youtu.be/QzL3p5Mb_Mg - - - - - - Please watch: 'Olive Branch Bowl' https://www.youtube.com/watch?v iIp6QYBSU0c - - - - - -


Bamboo Bangle
By: WayneAvenueWoodshop
October 13, 2014 · 3,642 views

This is a Bamboo Bangle turned for the Bangle Bowl 2014. I made this using an Ikea cutting board. http://www.thewoodwhisperer.com/bangle-contest


drechseln eines Armreifes [HD]
By: Tiroler Drechsler
September 18, 2014 · 25,570 views

Heute drechseln wir einen Armreif aus Kirschholz, der einen Durchmesser von 70 mm, eine Dicke von 5mm und eine Breite von 35mm hat. _________________________________ Die Musik ist von KsTBeats https://www.youtube.com/user/KsTBeats _________________________________ camera: Sony Xperia Go Have fun! \( _ )


Braccialetto al tornio - Bracelet on the lathe
By: Mauro il tornitore
February 14, 2014 · 8,527 views

Come realizzare un originale braccialetto al tornio. Step by step guide to make a bracelet on the lathe.


Final sanding of a bracelet after parting
By: Solway Wood Turning
September 07, 2013 · 63 views

via YouTube Capture


Making Bangle Bracelets
By: DentonTurners
April 19, 2013 · 6,325 views

Joel Rubin returns to the Golden Triangle Woodturners' monthly club meeting. This time Joel shows us how he makes Bangle Bracelets. You can find out more about our club in Denton Texas by going to our club website at www.goldentrianglewoodturners.org We meet the first Monday of each month at the Center for the Visual Arts located at the corner of Hickory and Bell in Denton, Texas. All are welcome.


Bangle Video Part 9 - Finishing the Bangle and Photography
By: WildWood Design
March 18, 2013 · 9,106 views

In this video, we cover finishing the inside diameter of the bangle using a fine grit unitizing wheel and Renaissance Wax. We also cover photography and using a photo cube with a variegated backdrop for professional looking results. Purchase our bangle making products at www.bangleguy.com and follow along on our Facebook page at WildWood Design. Thanks for watching the WildWood Design Channel on YouTube!


Bangle Video Part 7 - Final Turning
By: WildWood Design
February 21, 2013 · 13,833 views

How to make a metal core, wood bangle using BangleGuy.com wood and metal products. Follow us on Facebook at Wildwood Design.


Bangle Video Part 6 - Gluing It All Up
By: WildWood Design
February 15, 2013 · 12,769 views

How to make a metal core, wood bangle using BangleGuy.com wood and metal products.


Bangle Video Part 5 - Sizing the Width
By: WildWood Design
February 14, 2013 · 11,959 views

How to make a metal core, wood bangle using BangleGuy.com wood and metal products. Follow us on Facebook at Wildwood Design.


Bangle Video Part 4 - Sizing the Inside Diameter
By: WildWood Design
February 14, 2013 · 18,980 views

How to make a metal core, wood bangle using BangleGuy.com wood and metal products. Follow us on Facebook at Wildwood Design. Use BangleGuy metal cores for Polymer Clay, glass slumping or mineral inlays.


Bangle Video Part 3 - Drying & Stabilization
By: WildWood Design
February 12, 2013 · 24,748 views

How to make a metal core, wood bangle using BangleGuy.com wood and metal products. Follow us on Facebook at Wildwood Design.


Bangle Video Part 2 - Cutting a Blank
By: WildWood Design
February 12, 2013 · 11,030 views

How to make a metal core wood bangle using BangleGuy.com wood and metal products.


Bangle Video Part I - Wood Selection
By: WildWood Design
February 10, 2013 · 8,850 views

How to make a metal core, wood bangle using BangleGuy.com wood and metal products.


Easy Bracelet Chuck for Woodturning
By: As Wood Turns
January 25, 2013 · 43,440 views

http://www.AsWoodTurns.com In my last video I turned a segmented bracelet using my new home made bracelet chuck. It is an expansion chuck using basic engineering principles with lathe components. It uses 2 tapered end plugs, 8 tapered side slats, 2 automotive band clamps, 4 latex tubing rings, and a little duct tape. One end plug is fitted to the lathe spindle. As originally designed, I would have drilled a hole in the plug sized to a spur drive center. However, I decided to thread it to hold it more firmly in place. This is especially nice when assembling a bracelet onto the chuck. I used a t


Woodturning A Segmented Bracelet
By: As Wood Turns
January 19, 2013 · 44,431 views

http://www.AsWoodTurns.com Last summer, I turned some wood bracelets for my granddaughters. Afterwards, a viewer send in a question about how to turn the outside of the bracelet without flipping the workpiece over. With that in mind, I designed an expansion chuck on which to turn bracelets. With the chuck, I can now turn bracelets more easily. This bracelet is made from tiny wood segments. Three closed segment rings have 12 segments each. Two open segment rings have 24 segments each for a total of 84 segments. Since the wood is left over from a previous project, I'm not sure what the redish wood is (Not Padauk). The light colored wood is maple. I'll describe the bracelet expansion chuck and the wood faceplates/chucks in additional videos.Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.


NEFWA May 2012 - Rings and Bracelets
By: North East Florida Woodturners Association
October 26, 2012 · 1,794 views

Turning Rings and Bracelets Demonstration of turning rings and bracelets by Lenny Myers at the May 2012 meeting of the Northeast Florida Woodturners Association.


How to Turn a Simple Bracelet
By: turnersgold
July 24, 2012 · 83,931 views

'A Turner's Gold, Wood Works and Arts' presents to you, the basic techniques to turning a simple wooden Bracelet.


Woodturning Wood Bracelets For My Girls Part 2
By: As Wood Turns
July 04, 2012 · 21,556 views

http://www.AsWoodTurns.com With the pending visit from my grandchildren, I decided to make a bracelet or bangle for each girl. In the last video, I made the first set of three. But with six granddaughters, 3 bracelets is not enough. I needed three more. With three under my belts, I changed them a little bit. In the first batch, I used four segments per layer. In this batch, I use eight segments per layer. There are two segmented layers with one layer of thick oak veneer between them. Woods are Purpleheart, Padauk, Honey Locust, Oak and Maple. with the practice from the previous batch, these


Woodturning Wood Bracelets For A Girl
By: As Wood Turns
June 22, 2012 · 35,209 views

http://www.AsWoodTurns.com Several years ago, I had a bright idea to make wooden ties. I made several which turned out very nice except they were not very comfortable to wear. They only bent in one direction. I did not make any more beyond the first batch but still had a lot of wood milled out. Now I'm using the wood for a wooden bracelet for a grand daughter using segmented turning techniques. For this first set, I'm using four segments in a layer. Two segmented layers are glued up witha thick piece of Oak veneer in between for added strength. Woods are honey locust, maple, walnut, a probabl


Making a Segmented Bracelet for my Little Princess Part 3
By: Lamar Sineath
March 16, 2012 · 2,895 views

Part 3 covers sanding, finishing, and discussion of mistakes, issues and questions about the process of making a segmented bracelet. This video contains royalty free music from Dynamedion and purchased from www.soundsnap.com The track used in my video is 'Children BL EVA goodbye love L1 The direct link to the music is http://www.soundsnap.com/node/56171 The link to soundsnap's TOS is http://www.soundsnap.com/tos


Making a Segmented Bracelet for my Little Princess Part 2
By: Lamar Sineath
March 14, 2012 · 9,583 views

This is the actual woodturning part of making a segmented wooden bracelet using red oak, padauk and purple heart wood.


Making a Segmented Bracelet for my Little Princess Part 1.wmv
By: Lamar Sineath
March 12, 2012 · 1,114 views

Watch me make my first segmented bracelet for my daughter's birthday. Gain new perspective to making segmented peices of art. I hope you enjoy it. This video contains royalty free music from Dynamedion and purchased from www.soundsnap.com The track used in my video is 'Children BL EVA goodbye love L1 The direct link to the music is http://www.soundsnap.com/node/56171 The link to soundsnap's TOS is http://www.soundsnap.com/tos


Tournage d'un bracelet
By: Laurent Cortot
February 01, 2012 · 20,818 views

Mon blog: http://lolotourneur.blogspot.com/ Bois vert de cerisier


Woodturning Turning A Bracelet On The Lathe
By: Carl Jacobson
February 22, 2010 · 42,438 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. How To Turning A Bracelet Using A Waste Block Jig - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -


Return to Turning Videos

Great Bargains
(ends April 25, 2019)

Square Mini Ergonomic Carbide Turning Tool

On Sale for only $49.99

Save $30.00

List price: $79.99

This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Click here for more information or to purchase


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase


Rockler Four-Piece Cheese Knife Turning Kit

7/8" On Sale for only $29.99

1 1/4" On Sale for only $39.99

Save $10.00

List Price: $39.99

The cheese cutters are made from food-grade 304 stainless steel and attached to the handles which you turn. The kit includes 1/4-20 threaded inserts. The cheese cutters themselves are dishwasher safe; the handles are easily removed for this purpose.

Click here for more information or to purchase

GVS Elipse P100 Half Mask Respirator with 2 Bonus Filters, Small/Medium

For only $25.99

Save $11.99

List Price: $37.98

These Elipse P100 Half-Mask Respirators from GVS are designed to protect against dust particles, metal fumes, mists, oil and water vapors, and even some micro-organisms. Each mask includes two low-profile filters, which permit a wide field of view, and won't interfere with safety glasses and sanding shields. The filters are easily interchangeable, and replacement filters are readily available.

Click here for more information or to purchase

Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat

For only $32.74

Save $13.70

List Price: $46.44

Shell offers built-in chin protection and extended top-of-head coverage. Highly adjustable headgear tilts visor nearer or farther from face depending on preference and application. Comfortable cell foam on back of headgear. Breathable, removable, washable headband. Comfortably worn with most goggles and respirators.

Click here for more information or to purchase

4-Piece Safety Kit

For only $19.99

Save $15.00

List Price: $34.99

Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Ideal for table saw and router table use. Angled push blocks feature ultra-grippy Bench Cookie pad material. They are great for jointer and router table applications. Table featherboard assists in holding stock against the fence while sawing or routing and helps to reduce kickback. It fits standard 3/4" x 3/8" miter slots found on table saws and router tables, and features expandable miter track bars for maximum holding power.

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Hunter Woodturning Tools
Arizona Carbide
From Walnut to Antlers

(Click any Ad to go to our Sponsor's Website)