Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Pen Turning Videos (215)

Sort by

Or click here to: Search All Videos


So you want to turn pens... Part 4... Pen blanks
By: Billy Burt
February 02, 2018 · 12 views

In this fourth episode I talk about and show what I consider to be the three common varieties of pen blanks available to the pen turner... wood, synthetics and specialty blanks. International Association of Penturners (IAP) http://www.penturners.org Wood identification http://hobbithouseinc.com/personal/woodpics/ lacewood/leopardwood discussion http://hobbithouseinc.com/personal/woodpics/_discussion_sycamore.htm Alumilite source https://www.turntex.com/ Eugene Soto http://www.muttblanks.com/ ----------------------------- Stabilizing You can stabilize blanks yourself by using Cactus Juice https://www.turntex.com/ Or you can send your blanks to River Ridge http://rrpwhite.com/wood-stabilizing/ ----------------------------- Craft Supplies USA https://www.woodturnerscatalog.com Arizona Silhouette http://www.arizonasilhouette.com/ Bear Tooth Woods http://www.beartoothwoods.com/catalog/ Exotic Blanks https://www.exoticblanks.com/ Woodturningz http://www.woodturningz.com

 

So you want to turn pens... Part 3... Pen kits
By: Billy Burt
January 29, 2018 · 12 views

In this third episode I talk about and show some of the pen kits you may see, some places to get them and I discuss some of the platings the kits come in. Berea Hardwoods https://www.bereahardwoods.com/pen-kit/supplies/pen-kits.html Craft Supplies USA https://www.woodturnerscatalog.com/c/1/Pen-Kits Penn State Industries (PSI) https://www.pennstateind.com/store/pen-kits.html International Association of Penturners (IAP) http://www.penturners.org Arizona Silhouette http://www.arizonasilhouette.com/ Bear Tooth Woods http://www.beartoothwoods.com/catalog/ Exotic Blanks https://www.exoticblanks.com/ Woodturningz http://www.woodturningz.com

 

Pen Turning 101 Part 8
By: Four Oaks Crafts
January 27, 2018 · 46 views

In this video I will cover pen turning safety. Wood turning is a relatively safe hobby, but with any hobby there are some hazards you need to be aware of. One of the keys is getting educated and learning about the craft of pen turning as much as you can. Then learn about your personal tools, so crack own your owner's manuals and do a little reading. Then also wear the right PPE as you're turning, incase something gets out of control. I talk about all this and more in the Pen Turning 101 Part 8 video. Check out my website at the link below and if you subscribe, I automatically will send you the Home Shop Safety & Tool Checklist. It's a comprehensive list of things to consider as you design your shop to be more efficient and safe. http://www.fouroakscrafts.com

 

So you want to turn pens... Part 2... Tools
By: Billy Burt
January 22, 2018 · 11 views

In this second episode I talk about and show some of the tools you will need and some that may come in handy. (My apologies to those who may have viewed this already. I initially uploaded the wrong file and had to delete and reload.) The following links provide information on sharpening your turning tools: Sam Angelo https://www.youtube.com/user/WYOMINGWOODTURNER/search?query sharpening Gwinnett Woodworkers https://www.youtube.com/user/gwinnettwoodworkers/search?query sharpening Mike Peace https://www.youtube.com/watch?v PphTuysq5GY Eddie Castelin https://www.youtube.com/user/capneddie/search?query sharpening A good source of information for pen turning is the International Association of Penturners (IAP). It is a forum where pen turners share their work and information. http://www.penturners.org

 

So you want to turn pens... Part 1... Lathes
By: Billy Burt
January 19, 2018 · 33 views

This is the first episode of several involving pen turning where I will attempt to answer some of the many questions I've frequently seen on the various social media. In this episode I talk about lathes... specifically those that will serve you well and those to stay away from. Holly Denney - http://www.hollydenney.com/ Carl's Robust Scout video - https://www.youtube.com/watch?v aveJ6QCTXkE&t 3s

 

Pen Turning 101 Part 6
By: Four Oaks Crafts
January 15, 2018 · 45 views

This video covers how to turn a pen on the lathe. I'll discuss tools and techniques you need to know for turning your first pen.

 

Pen Turning 101 Part 5
By: Four Oaks Crafts
January 14, 2018 · 57 views

This video covers pen blank preparation. I cover measuring your pen barrels, cutting them, drilling the hole, and barrel trimming. These are all the steps you need to perform before putting the blank on the lathe to turn. I'll be using the cigar pen kit for this demo.

 

How to make a Clear Steampunk Pen Part 5
By: Gabe Castro
January 10, 2018 · 72 views

How to make a Clear Steampunk Pen Part 5, final turning. (Epic Failure)

 

How to make Clear Steampunk Pen Part 4
By: Gabe Castro
January 10, 2018 · 71 views

How to make a Clear Steampunk Pen Part 4

 

How to Make Clear Steampunk Pen Part 3
By: Gabe Castro
January 10, 2018 · 55 views

How to make a Clear Steampunk Pen Part 3, cutting channels in blank and Piston Filler system.

 

How to make Clear Steampunk Pen Part 2
By: Gabe Castro
January 09, 2018 · 85 views

Drilling and Tap and Die Blank For Clear Steampunk Pen

 

How to make Clear Steampunk pen Part 1
By: Gabe Castro
January 08, 2018 · 91 views

How to make / cast the blanks for the Clear Steampunk pen.

 

Recycling Steampunk pens
By: Gabe Castro
January 06, 2018 · 111 views

How to recycle Steampunk pens with Acetone.

 

Pen blank drilling, two methods
By: Gabe Castro
January 04, 2018 · 109 views

How to drill pen blanks with two different methods.

 

Paint the Tube or the Blank?
By: Lynn Lacey
January 03, 2018 · 1,082 views

There are times when penturners encounter transparent blanks. When this happens, what do you do?? Do you paint the tube or the blank? In this video we compare painting the tube , or the blank or both while gluing tubes in with CA and 2 part epoxy. Instagram; @LL_woodworks www.LL-Woodworks.net Testors Model Paint http://amzn.to/2CNgiW5 Stickfast Medium CA http://amzn.to/2ENRZbf Locktite epoxy http://amzn.to/2Ahup2S Disclaimer: My videos represent how I go about my woodworking. They are for your entertainment and not instruction. My safety is MY responsibility and YOUR safety is YOUR responsibility. Before beginning any woodworking be familiar with your equipment and always - always wear the proper personal protective equipment. When performed safely, woodworking be fun and rewarding. Keep it fun by working safe.

 

Bespoke Tool Listing: Here's Everything You'll Need To Turn Kitless Pens
By: RJBWoodTurner
December 31, 2017 · 3,976 views

I'm kicking off my Bespoke pen turning adventure with a quick video on the tools you'll need to get started. Regards, Bob Bespoke Tool Listing Document: https://drive.google.com/drive/folders/1wMrznNd2OKRvOp6BCc2DAb_LdoiqeZYi?usp sharing Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Using Acetone To Clean Resin Off Tubes
By: RJBWoodTurner
December 26, 2017 · 1,634 views

Experimenting with a way to clean off tubes for reuse. Regards, Bob Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Pen Blank Corner Trimming Jig
By: RJBWoodTurner
December 23, 2017 · 3,126 views

This is a jig for trimming the corners off pen blanks Regards, Bob Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Slimline Pens XR3i....
By: CL Woodturning
December 20, 2017 · 63 views

 

How to use 14MM Double Start Tap and Die on Alumalite pen blank.
By: Gabe Castro
December 06, 2017 · 91 views

How to use 14MM Double Start Tap and Die on Alumalite pen blank.

 

Montage Of Pens For Inspiration
By: Erik Anderson
December 02, 2017 · 1,502 views

A look at the pens and pencils I have been turning!

 

Saving The Kit
By: Ron Calverley
November 27, 2017 · 369 views

Adjusting a pen part to fit.

 

Cigar Pen/Pencil Pressing Made Easier
By: Ron Calverley
November 26, 2017 · 538 views

I was doing this step the hard way. This new way is so much easier, faster and less chance of pressing the part in too far.

 

Pen turning Gonçalo Alves
By: Assis Ribeiro
November 23, 2017 · 6 views

Woody turning pen

 

Pen Turning 101 Part 4
By: Four Oaks Crafts
November 20, 2017 · 192 views

In this video, I'll be discussing pen kits. How to unpack a pen kit, metal platings, anatomy of a pen, and I'll cover pen kit instructions. Sit back and enjoy the video! Leave comments and ask questions. Pen Kit Suppliers List: http://www.fouroakscrafts.com/list-of-pen-kit-suppliers/ Pen Turning Resource Guide: http://www.fouroakscrafts.com/pen-turning

 

Mandrel Saver & Nut Too - Part 2
By: Ron Calverley
November 19, 2017 · 425 views

I forgot to mention an important aspect in part 1 regarding this issue.

 

Pen castiing & molding Part 2 of 2
By: BowersCraft Woodturning
November 19, 2017 · 67 views

Pen Turning & polishing through to final assembly Polish 3M FAST CUT https://www.ebay.co.uk/itm/Fast-Cut-Compound-3M-Perfect-It-III-POLISHING-CAR-BODY-SHOP-1kg-09375/221628188602?epid 1609344691&hash item339a11c7ba:g:Mr8AAOSwg3FUg6PN Polish G10 https://www.ebay.co.uk/itm/Farecla-G10-Rubbing-Compound-500ml-Car-Bodyshop-Finishing-Liquid-Polish/382277114277?epid 1742149553&hash item59017dd9a5:g:FeEAAOSwC81ThxV5 Polish G3 https://www.ebay.co.uk/itm/Farecla-G3-Advanced-Liquid-Compound-1-Litre-Car-Polishing-Paint-Restorer/382259425767?epid 1505795489&hash item59006ff1e7:g:pawAAOxyUI1TIY-e Pen Kit http://pencrafts.co.uk/store/index.php?route product/product&product_id 906&search celtic

 

Mandrel Saver & Nut Too ???
By: Ron Calverley
November 18, 2017 · 435 views

This is why I often have a nut on my mandrel even though I'm using a mandrel saver.

 

Pen Turning 101 Part 3
By: Four Oaks Crafts
November 18, 2017 · 212 views

This video covers pen blank selection and some tips on making your own pen blanks. We'll talk about exotic hardwoods and alternative materials like acrylic and deer antler. Here is a comprehensive pen turning resource: http://www.fouroakscrafts.com/pen-turning/ Pen Kit Suppliers List: http://www.fouroakscrafts.com/list-of-pen-kit-suppliers

 

Pen Turning 101 Part 2
By: Four Oaks Crafts
November 11, 2017 · 306 views

This is Part 2 of my Pen Turning 101 Series. In this video, I'm talking about pen mandrels and how to hold your pen blanks on the wood lathe. My Comprehensive Pen Turning Resource: http://www.fouroakscrafts.com/pen-turning/ Pen Kit Suppliers List: http://www.fouroakscrafts.com/list-of-pen-kit-suppliers

 

Pen Turning 101 Part 1
By: Four Oaks Crafts
November 11, 2017 · 303 views

This video is part 1 of my series Pen Turning 101. In Part 1, I talk about wood lathes. I'll talk about lathe terminology, setup, and cost. My Comprehensive Pen Turning Resource: http://www.fouroakscrafts.com/pen-turning/ Pen Kit Suppliers List: http://www.fouroakscrafts.com/list-of-pen-kit-suppliers

 

Turning On Centers
By: Ron Calverley
October 18, 2017 · 622 views

Attempting to drill a tapered end in a brass rod that could be later turned down into a bushing for turning a pen blank on centers. (make my own bushing) 'FAIL'

 

Homemade Bespoke pen clip
By: Gabe Castro
October 12, 2017 · 307 views

Homemade Bespoke pen clip from 50 Caliber cartridge. Click link to buy 4 Jaw Chuck System: http://amzn.to/2xTgeon Click link for Buffing Wheel: http://amzn.to/2yzMZWn Click link for Mini Lathe: http://amzn.to/2yzlyMs

 

Simple guide on turning pen and Pen press (English Yew)
By: CraftWithAfshin
October 03, 2017 · 257 views

I have setup a patreon account for those that wish to directly support me it is obviously not necessary since every project will also be uploaded here for free :) https://www.patreon.com/TurnWithAfshin

 

Pen Turning - Getting Started
By: Ron Calverley
October 01, 2017 · 7,152 views

This is most of the stuff needed to get into pen turning.

 

SPECTRAPLY SHAVINGS IN RESIN! / PURPLE CHINA
By: Nick Zammeti NZ WoodTurning
September 29, 2017 · 20,064 views

VON HANKE (BRANDING IRON) https://www.etsy.com/uk/shop/vonHanke?ref profile_shopicon MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM

 

Test. Resin & Aluminium
By: SCCFORUM
September 24, 2017 · 183 views

Just a test to see if the resin adheres to the aluminium.

 

Steampunk blank clean out
By: Gabe Castro
September 15, 2017 · 32 views

Using drill press to clean out Sierra Steampunk brass tube blank. Click link to buy Casting Craft Resin: http://amzn.to/2gQf4Q2

 

023-01-01 WWRJF - A Better Drilling Method 9min
By: Richard Ford
September 13, 2017 · 73 views

023-01-01 WWRJF - A Better Drilling Method 9 min Originally Uploaded 2016-03-13 908 Views

 

Thread & Resin.
By: SCCFORUM
September 11, 2017 · 320 views

Mouline thread from DMC. Wrapped around 7mm tube, cast in Opti cast 100 resin.

 

Imbedded object pen blanks-avoiding mistakes!!
By: Ed Brown
September 11, 2017 · 395 views

Ed shows a new approach to turning hand-made blanks. Eliminate the pen mill and minimize the chances of separation of the resin from the brass tube. Also minimize the chance of 'chipping out' the resin, by using the 'turn between centers' technique. Demonstrated using new 'opal' blanks from JackieU!!

 

click pen assembly
By: Jon Whateley
September 02, 2017 · 540 views

See how to assemble the Prokraft slimline click pen kit. Turn a slimline click pen kit with standard slimline pen bushings.

 

Acrylic Pen Buffing System Q&A
By: RJBWoodTurner
August 27, 2017 · 5,732 views

 

Pen Making
By: Lee Burkholder
August 24, 2017 · 234 views

Cumberland Valley Wood Turners, lathe, wood turning, pen making, turning a pen, making a pen, pens, wooden pens, learning pen turning

 

018-01-01 WWRJF - One Pen-Mill For All Tubes 17 Min 2014
By: Richard Ford
August 23, 2017 · 18 views

This video documents a method for using a standard pin-mill for many of the kits that use a tube glued inside the turned material Originally Uploaded:- Dec 2, 2014 780 views

 

Alex's WoodTurning How to Make a Pen
By: Alex's WoodTurning
August 19, 2017 · 141 views

Hello everyone my name is Alex and I'm 13 years old , I'm a beginner WoodTurner I love looking at a piece of wood and thinking it can be a useful house hold item.Such as a Cheese Knives, Pens and Many more don't forget to like and subscribe if you want more content like this Enjoy! Mike Waldt's Channel: https://www.youtube.com/user/TheCymruBoy TimberBits: www.timberbits.com

 

How to Make a Pen Bump Video Experiment Love it or Hate it?
By: OG Timbercraft
August 12, 2017 · 47 views

This is a remake of a previous video. I edited the original content and experimented with the Bump feature in the video editor. Comment whether you like it or hate it. How to make a Wood Centering tool & Channel Spotlight https://youtu.be/Ji5rjfBanj0 Mortise and Tenon Stool & Channel Spotlight https://youtu.be/WHg2rU7djCY How to make Cherry Pen Blanks & Channel Spotlight https://youtu.be/1k0eZ1YCR44 2016 Pen Turning Challenge by James Green Stress Free Woodworks https://youtu.be/JCAzZrTFik8 How to Green Screen Chroma Key https://youtu.be/GP14WB70i00 How to make a Mortise and Tenon Table

 

13 Essential Tools and Supplies for Making Pens
By: PennStateIndustries
August 10, 2017 · 802 views

Here are the 13 essentials tools and supplies you'll need to start making pens For this video, the essential tools an supplies are below. Click the links to shop for these items at https://www.pennstateind.com 1. Pen Kits - http://bit.ly/2urTgD8 2. Pen Blanks - http://bit.ly/2vICDmB 3. Mini Lathe - http://bit.ly/2vSi32V 4. Cutting (or any tool that will cut) - http://bit.ly/2uJvuhm 5. Drilling (or any tool that will drill)- http://bit.ly/2vSdplk 6. Glue - http://bit.ly/2ut06UR 7. Pen Tube Insertion Tool - http://bit.ly/2wxoKFn 8. Barrel Trimmer - http://bit.ly/2uJBZk0 9. Pen Mandrel - http://bit.ly/2vqh0oB 10. Chisels - http://bit.ly/2wLPDVu 11. Sandpaper - http://bit.ly/2vqh5Zr 12. Finishes - http://bit.ly/2wLCdIX 13. Pen Press - http://bit.ly/2vSpeIo To learn more get our FREE 45 minute instructional Pen Making DVD. It provides provides a wealth of information for those considering getting involved in this rewarding hobby. Get your FREE DVD by clicking here: http://bit.ly/2vITOVb

 

Press Pens On Your Lathe
By: RJBWoodTurner
August 01, 2017 · 3,312 views

Using a rod of Derlin, I made a couple bushings for assembling pens right on the lathe. Regards, Bob My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Thoughts on Ordering Pen Kits from China
By: Lisburn Wood Works
July 31, 2017 · 495 views

Several US pen suppliers sell kits that are manufactured in China. There are a couple of options for us to buy kits directly from the manufacturer. This video covers some of my experience with that. The sources I reference in the video: http://www.penkitsmall.com/ http://www.acemetalpen.com

 

How I Paint Tubes and Pen Blanks
By: Lynn Lacey
July 28, 2017 · 1,700 views

Sometimes Pen blanks are very transparent. To avoid seeing the brass tube thru the blank one must paint the pen tube and sometimes the pen blank. I this video I show how I paint pen tubes and pen blanks. Instagram; @LL_woodworks www.LL-Woodworks.net Facebook; https://www.facebook.com/LL-Woodworks-397970183658553/ Pen Making Playlist https://www.youtube.com/watch?v TO3P_otYxJE&list PLqhhB9PS87ya7CF3iNVel-Wjj6G7OQ0fh In My Shop; Transfer Punch Set http://amzn.to/2oyKQmj Letter Drill Bit Set: http://amzn.to/2pS4RWj Number Drill Bit Set: http://amzn.to/2pRZpCu Forstner Drill Bit Set: http

 

Sanding & Finishing Between Centers - Quick Tip
By: Lisburn Wood Works
July 28, 2017 · 166 views

Quick Tip: sand and finish your pens between centers even if you use a mandrel to turn. Make sure you choose the correct centers for your particular lathe: MT2 is most common but some are MT1 as well. Here's an example of dead center (shop around for best prices)https://www.amazon.com/Carbide-Tipped-Lathe-Center-03016A/dp/B008B0Y1BK/ref sr_1_1?ie UTF8&qid 1501361699&sr 8-1-spons&keywords mt2 dead center&psc 1 Example of Live center. Again, shop around for good reviews, best price etc. https://www.amazon.com/PSI-LCENTLT2-Heavy-Tailstock-Center/dp/B000KIEPSA/ref sr_1_3?s industrial&ie UTF8&qid 1501361869&sr 1-3&keywords mt2 live center

 

Pen Turning
By: Roger Scott
July 16, 2017 · 68 views

A FACTUR member's pen turning party and workshop. Fun fun fun.

 

How To: Prepare a Pen Blank For Turning
By: Nathan Cumming
July 15, 2017 · 202 views

The first of my instructional videos. In this video I demonstrate how to prepare a pen blank for woodturning on the lathe. First, the measurements for the tubes are marked on the blank with marks to identify grain direction and separate sides. The blank is then halved prior to boring the centre holes. I bore the holes through the blanks using a drill bit mounted in a drill chuck on the tail stock while the blanks are held in the pen jaws of my SC4 scroll chuck. Once the holes are bored the brass tubes are keyed and glued in place using medium CA ensuring the tubes are aligned in the correct

 

Sharpening Barrel Trimmers Woodturning How-to
By: Craft Supplies USA
July 13, 2017 · 7,663 views

Learn how-to sharpen your dull barrel trimmer heads. Sharpening supplies: https://www.woodturnerscatalog.com/t/96/Honing?utm_source youtube&utm_medium description&utm_content barreltrimm&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodturning tools and supplies in the industry.Sharpening and Honing supplies are available at https://www.woodturnerscatalog.com, 1-800-551-8876 Subscribe to our email list: https://www.woodturnerscatalog.com/Email-Specials-Sign-Up Visi

 

006 5 5 WWRJF Pen Making Assembly 9min
By: Richard Ford
July 06, 2017 · 10 views

Step 5 Assembling the Pen with a pen-press.

 

006 4 5 WWRJF Pen Making Turning 21
By: Richard Ford
July 06, 2017 · 7 views

Step 4 - Turn and finish the pen body on a mandrel.

 

006 3 5 WWRJF Pen Making Glueing 17min
By: Richard Ford
July 06, 2017 · 11 views

Step 3 - Gluing the tubes in the pen bodies.

 

006 2 5 WWRJF Pen Making Drilling 7min
By: Richard Ford
July 06, 2017 · 9 views

Step 2 - Drilling the blanks for the tubes.

 

006 1 5 WWRJF Pen Making Cutting the Blank 14min
By: Richard Ford
July 06, 2017 · 18 views

Step 1 - Cutting the Blank to size on the bandsaw.

 

What Tools Do I Need For Turning Pens
By: RJBWoodTurner
July 03, 2017 · 3,113 views

This video will give an overview of the tools needed for turning pens. I also talk about nice to have verses need to have tools and give alternatives where possible. Regards, Bob My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

The Reamer Handle - Part 3 (conclusion)
By: Ron Calverley
July 01, 2017 · 562 views

Making a handle for my brass tube reamer.

 

The Reamer Handle - Part 1
By: Ron Calverley
June 28, 2017 · 616 views

Making a handle for my brass tube reamer.

 

Turning Pens - Gary Bobenhausen - Part 3
By: DentonTurners
June 22, 2017 · 463 views

Gary Bobenhausen has been wood working for about 35 years. He started out making wood toys for his two sons because he did not like the quality of the toys on the market. About 25 years ago Gary started wood turning, mainly making pens. After self-teaching and taking some formal classes, Gary expanded his wood turning abilities. In this demonstration, Gary will talk about how to turn pens and other small items. He discusses some of the Do’s and Don’ts of turning items. He also talks about the materials needed to turn the small items and how to finish them. Part 1 - Tools, materials and pr

 

Turning Pens - Gary Bobenhausen - Part 2
By: DentonTurners
June 22, 2017 · 500 views

Gary Bobenhausen has been wood working for about 35 years. He started out making wood toys for his two sons because he did not like the quality of the toys on the market. About 25 years ago Gary started wood turning, mainly making pens. After self-teaching and taking some formal classes, Gary expanded his wood turning abilities. In this demonstration, Gary will talk about how to turn pens and other small items. He discusses some of the Do’s and Don’ts of turning items. He also talks about the materials needed to turn the small items and how to finish them. Part 1 - Tools, materials and pr

 

Turning Pens - Gary Bobenhausen - Part 1
By: DentonTurners
June 22, 2017 · 757 views

Gary Bobenhausen has been wood working for about 35 years. He started out making wood toys for his two sons because he did not like the quality of the toys on the market. About 25 years ago Gary started wood turning, mainly making pens. After self-teaching and taking some formal classes, Gary expanded his wood turning abilities. In this demonstration, Gary will talk about how to turn pens and other small items. He discusses some of the Do’s and Don’ts of turning items. He also talks about the materials needed to turn the small items and how to finish them. Part 1 - Tools, materials and pr

 

First Proper Pyro Project - Episode 81
By: Paul Lockwood
June 10, 2017 · 505 views

I've only used the Pyro machine a couple of times for putting names on pens. This is the first proper project, all be it a small project using the Peter Childs Pryo Machine. Music The Handymans Lament (Instrumental) By Josh Woodward http://freemusicarchive.org/music/Jos... From The Free Music Archive http://freemusicarchive.org CC Attribution 4.0 International https://creativecommons.org/licenses/... Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Pen Swap Announcement & Shop Update
By: Lynn Lacey
June 09, 2017 · 637 views

Today we will discuss this year's Pen Swap Announcement, answer some questions concerning some past projects and look at some future projects. Instagram; @LL_woodworks www.LL-Woodworks.net Facebook; https://www.facebook.com/LL-Woodworks-397970183658553/ Brick Blank Blunder https://youtu.be/RYL2mfruWYU Snake Eyed Blank https://youtu.be/byLRoUn6OkU Pen Display Stand Video https://youtu.be/Eynz6Hmh-h0 Pen Stand PDF https://www.dropbox.com/s/46dz62kx738ozt4/Pen%20Display%20Stand.pdf?dl 0 Tips With Cy https://youtu.be/cITxA3qVua0 Shoe Carousel https://youtu.be/AASUgjT7AUg Tool Carousel

 

My first acrylic pen trying out Acrylic pen paste!
By: CraftWithAfshin
May 27, 2017 · 298 views

Hey guys today im turning my first Acrylic pen I never turned resin before so im very excited, I didnt make the pen blank but hopefully one day I will when i get pressure tank. I hope you guys enjoy it and if you have please like and subscribe it helps the channel massively! love you all. Music: Inspired Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0/ Angel Share Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

Making pens
By: Brad c
May 20, 2017 · 6 views

Learning more and more about making these pens

 

MAKING TWO WOODEN PENS!
By: Nick Zammeti NZ WoodTurning
May 11, 2017 · 8,207 views

My new Robert Sorby Pen Turning Kit http://www.robert-sorby.co.uk/woodturning/woodturning-sets/micro-woodturning-tool-sets/a36hs3t-pen-turning-set UKIWS http://www.ukiws.co.uk/ AAW WOODTURNING KANSAS CITY http://www.woodturner.org/?page 2017KC MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw MY NZ WOODTURNING EMBLEMS (round brass logo makers mark) http://www.williams-eng.co.uk/ THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com

 

Special tool with pencil sharpener for making dowels and small flag sticks - 2017
By: Gabor Aron Fetyko
May 10, 2017 · 4,628 views

some works of my father see more on: http://www.facebook.com/feticogaboraron

 

Part 3 Ebonite fountain pen cap
By: Gabe Castro
May 08, 2017 · 335 views

Ebonite fountain pen cap on mini lathe. Click link to buy Mini Lathe: http://amzn.to/2yzlyMs Click link to buy 4 Jaw Chuck System: http://amzn.to/2xTgeon

 

Home made Segmented Kitless pen Mandrel
By: Gabe Castro
May 08, 2017 · 568 views

How to make a inexpensive kitless segmented pen mandrel that will stay straight. Click link to buy 4 Jaw Chuck System: http://amzn.to/2xTgeon Click link to buy Mini Lathe: http://amzn.to/2yzlyMs

 

Turning snakeskin blanks, using turn between centers bushings
By: Ed Brown
May 07, 2017 · 849 views

Turning snakeskin blanks between centers. Avoiding separation at ends.

 

African Blackwood Stylus Pen - Episode 76
By: Paul Lockwood
May 06, 2017 · 356 views

I've made a few pens now and also uploaded a few videos. This is a different video format to what I usually do just showing how this pen was made. There were a few issues which I talk about at the end. Music Release (Instrumental) and My Favorite Regret (Instrumental) By Josh Woodward http://freemusicarchive.org/music/Jos... From The Free Music Archive http://freemusicarchive.org CC Attribution 4.0 International https://creativecommons.org/licenses/... Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Part 2 of 3 Ebonite Kitless fountain pen body
By: Gabe Castro
May 06, 2017 · 630 views

First Kitless fountain pen body in Ebonite. Click link to buy Mini Lathe: http://amzn.to/2yzlyMs

 

Pen Turning 101: Turning a Pen Inserting Tool Handle
By: Turning Round
May 03, 2017 · 309 views

This an instructional video on how to turn a walnut handle for a tool used in pen turning. In this video I turn a nice walnut handle for a pen inserting tool. This tool is used to help insert the brass tube in a pen blanks when assembling a pen for turning on the wood lathe. Check out my Etsy Store: https://www.etsy.com/shop/TurningRound Check out my Website: http://turninground.biz/ Or support me on Patreon: https://www.patreon.com/TurningRound Or Find me in Instagram as: TruningRound https://www.instagram.com/turninground/ Thanks for watching.

 

Part 1 of 3 Ebonite pen section
By: Gabe Castro
May 03, 2017 · 482 views

How I made my first pen section for kitless fountain pen. Ebonite section remade for pen in 3 part series. Click link to buy 4 Jaw Chuck System: http://amzn.to/2xTgeon Click link to buy Mini Lathe: http://amzn.to/2yzlyMs

 

CA Glue used in pen segmenting
By: Gabe Castro
April 27, 2017 · 1,442 views

How are use CA glue to stabilize a pen blank during turning and as a CA glue finish. Click link to buy CA Glue:http://amzn.to/2xR4Nxu Clink Link to buy Mini Lathe: http://amzn.to/2yzlyMs

 

Apprentice Pen Tube Insertion Tool
By: Craft Supplies USA
April 24, 2017 · 2,959 views

Avoid the mess of prepping glue-covered pen tubes by hand with the Apprentice Pen Tube Insertion Tool. Learn more: https://www.woodturnerscatalog.com/p/16/4491/Apprentice-Pen-Tube-Insertion-Tool?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA The tapered design of the tool easily fits inside most pen tubes holding it securely in place, so you can apply the glue evenly around the pen barrel and inside the blank while keeping your fingers away from the mess. Craft Supplies USA (The Woodturners Catalog) ca

 

How I Drill An Antler Pen Blank
By: Lynn Lacey
April 23, 2017 · 1,355 views

In this video I'll show How to drill a piece of deer antler for pen turning. There are many ways to accomplish this task and this is MY method for doing this. Please take all safety precautions in drilling any pen blank. Instagram; @LL_woodworks www.LL-Woodworks.net Facebook; https://www.facebook.com/LL-Woodworks-397970183658553/ In My Shop; Transfer Punch Set http://amzn.to/2oyKQmj Letter Drill Bit Set: http://amzn.to/2pS4RWj Number Drill Bit Set: http://amzn.to/2pRZpCu Forstner Drill Bit Set: http://amzn.to/2oVxumL Ryobi 18v Drill http://amzn.to/2q3E4FP Ryobi 18v Palm Router; ht

 

Turning the 'stars' blank
By: Ed Brown
April 23, 2017 · 887 views

Turning a resin blank that is a little 'chippy'. The noise of the lathe and the tool are not removed in this video so you can hear what it sounds like when you are 'just making ribbons'--successfully turning plastic.

 

TBC Bushings Explained, Pen making bushings
By: Chad Schimmel
April 08, 2017 · 1,815 views

This video goes over bushing options for making pens. My supply site is www.turnerwarehouse.com please check us out. TBC Bushings https://turnerswarehouse.com/search?q tbc TBC Adaptors http://goo.gl/Om3jg7 Here are the tools and equipment I use, I have included these amazon links because I get a commsion if these items are purchased. I only ask if you are going to buy them anyway please use these links and that will help the show and the shop. Thank you Jet 1221 lathe, http://amzn.to/2sUR5mF Jet 1015 lathe, a little cheaper price, http://amzn.to/2ue7Ld1 Drill Press, http://amzn.to/2udYm4Y Rikon Band saw, http://amzn.to/2tjgoON For Casting I use molds found here, https://goo.gl/rjbGti I use this scale for measure my resin, http://amzn.to/2eLFBzJ Dont forget your safety gear!!! Cheap safety glasses, http://amzn.to/2uUVcn8 Awesome safety glasses, http://amzn.to/2uVwcw0 Full face mask, http://amzn.to/2eMfUPu

 

Pen turning
By: SCCFORUM
April 08, 2017 · 231 views

 

Turn a Wooden Pen
By: Four Oaks Crafts
March 29, 2017 · 452 views

Learn step-by-step how to make a wooden pen on the lathe. In this video, I show you how I made a Cigar Pen, using Spalted Tiger Oak. Learn more about pen making on my website: http://www.fouroakscrafts.com/make-slimline-pen/ http://www.fouroakscrafts.com/make-american-patriot-bolt-action-pen/ http://www.fouroakscrafts.com/deer-antler-pen-make

 

Turning Pens // WOODTURNING
By: Peter Matthew
March 20, 2017 · 1,292 views

I made two slimline pens out of purple heart and leopard wood. Thanks for liking, commenting, and subscribing! Dust collection system: http://www.rockler.com/dust-right-lathe-dust-collection-system For more of my pen turning videos, check out this playlist: https://www.youtube.com/playlist?list PLE2bcZVXSO84v4QYhuPqfAFvnP6hPvZXc MUSIC CREDS Brock Berrigan: https://soundcloud.com/brockberrigan http://www.brockberrigan.com STICKER SWAP with your address peterturnswood@gmail.com Send mail here Peter Matthew 1580 S. Commerce Rd, Walled

 

'The Emperor' Pen - Part 8
By: Ron Calverley
March 11, 2017 · 578 views

Turning “The Emperor” pen kit from William Wood-Write. This will be my first high quality/expensive kit. Fingers crossed :)

 

'The Emperor' Pen - Part 7 UpDate
By: Ron Calverley
March 10, 2017 · 368 views

Turning “The Emperor” pen kit from William Wood-Write. This will be my first high quality/expensive kit. Fingers crossed :)

 

'The Emperor' Pen - Part 7
By: Ron Calverley
March 10, 2017 · 426 views

Turning “The Emperor” pen kit from William Wood-Write. This will be my first high quality/expensive kit. Fingers crossed :)

 

'The Emperor Pen' - Part 6
By: Ron Calverley
March 09, 2017 · 520 views

Turning “The Emperor” pen kit from William Wood-Write. This will be my first high quality/expensive kit. Fingers crossed :)

 

'The Emperor' Pen - Part 5
By: Ron Calverley
March 08, 2017 · 596 views

Turning “The Emperor” pen kit from William Wood-Write. This will be my first high quality/expensive kit. Fingers crossed :)

 

'The Emperor' Pen - Part 4
By: Ron Calverley
March 07, 2017 · 675 views

Turning “The Emperor” pen kit from William Wood-Write. This will be my first high quality/expensive kit. Fingers crossed :)

 

'The Emperor' Pen - Part 3
By: Ron Calverley
March 06, 2017 · 585 views

Turning “The Emperor” pen kit from William Wood-Write. This will be my first high quality/expensive kit. Fingers crossed :)

 

Pens from trash
By: George Fotinakes
March 06, 2017 · 437 views

I found that a 54 year old door that I just trashed had fine tight grain...excellent for turning Bic pen holders. I also display super glue wood finishing and propane torch wood finishing.

 

'The Emperor' Pen - Part 2
By: Ron Calverley
March 03, 2017 · 804 views

Turning “The Emperor” pen kit from William Wood-Write. This will be my first high quality/expensive kit. Fingers crossed :)

 

'The Emperor' Pen - Part 1
By: Ron Calverley
March 02, 2017 · 871 views

Turning “The Emperor” pen kit from William Wood-Write. This will be my first high quality/expensive kit. Fingers crossed :)

 

The Cannon Stick Pen
By: Ron Calverley
March 01, 2017 · 527 views

Just for fun, turning a miniature of the cannon that was made in 'The Log' series, and making a 'stick pen'.

 

Make Your Own Pen Nib, Cap, and Trim Ring from Corian
By: RJBWoodTurner
February 20, 2017 · 6,429 views

I was sent some Corian so I decided to turn the components of a Slimline Pen. In this video, I make the Nib, Trim Ring, and Cap for a Sapele Ink Pen. Regards, Bob My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

click drop test
By: Ed Brown
February 12, 2017 · 564 views

'Drop test' on the LeRoi click pen, now available at Exoticblanks.com

 

Putting a pen together
By: The AZ Viking
February 07, 2017 · 1 views

 

Sanding pen blanks after you turn it
By: The AZ Viking
February 07, 2017 · 11 views

 

Drilling a blank for a pen
By: The AZ Viking
February 05, 2017 · 7 views

 

The Cedar Projects - Part 6
By: Ron Calverley
February 01, 2017 · 776 views

Turning a few projects from a piece of cedar wood.

 

Pen Disassember Tool - Episode 53
By: Paul Lockwood
January 25, 2017 · 394 views

I've recently purchased a pen disassember tool after I have a few pens that need to be worked on. Here I go through the process of how easy or how hard it is to get the pen apart with a few little issues that I came across on the way. Was supposed to be a short video, sorry for the length. Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Turning A Sweet Gum Pod and Alumilite Fountain Pen
By: Casey Martin
January 15, 2017 · 10,286 views

SONG: Quinn XCII - Another Day In Paradise (Prod. ayokay) This is the third and final video in my little Sweet Gum Pod series where I turn a fountain pen from one of my pen blanks. My websites: winecountrywoodworks.com winecountrypens.com My email: casey@winecountrypens.com

 

Pen turning acrylic
By: Joan Busby
January 10, 2017 · 66 views

Acrylic blanks from PR resins

 

Pen turning Celtic knot
By: Joan Busby
January 10, 2017 · 97 views

Pen turning Celtic knot

 

How To Make A Pen With Recycled Skateboards
By: Zebrano Wood Craft
January 08, 2017 · 8,251 views

In this video I'll show you how I made a pen with recycled skateboards. This is a great woodturning project and I hope it inspires you to make something with old or broken skateboards! The end result was a very swish pen with a unique story and it made a great gift for my friends brother! I won't be in a hurry to make another of these but welcome you guys to try! If you're feeling inspired by this video and you'd like to try woodturning, recycling skateboards or general wood wizardry then please find a list of tools and materials I used to make this project... *I am a member of the Ebay

 

DIY - How to sharpen your barrel trimmer
By: Chapman Crafters
January 05, 2017 · 801 views

How to sharpen your barrel trimmer to keep it sharp! - - - - - - Please watch: 'DYI - Silicone Mold for Pen Blanks' https://www.youtube.com/watch?v _engdA0K-wQ - - - - - -

 

Pen turning and a thx!
By: yak branson
January 02, 2017 · 247 views

Blue acrylic with acorn tops pen blank! Only my 3rd pen so i use several tools to figure out what worked best.

 

Wood Pen Fastmo
By: Havewood Willturn
December 04, 2016 · 51 views

How a Wooden Pen is Turned

 

Polymer Clay Pen Making - How to Make a Clay Pen
By: PennStateIndustries
November 29, 2016 · 25,646 views

Creating a beautiful handmade Polymer Clay pen is fun and easy. This video shows you how to create a Polymer Clay pen, step by step using kits from Penn State Industries. We have everything you need to get started. Learn more at: http://bit.ly/2gGoTxz

 

How To Repair the PSI Vertex Clicker PLus - Rockler Goodies!
By: Lynn Lacey
November 22, 2016 · 761 views

Today I'll show you how to prevent the breakage of and repair the plastic piece of the PSI Vertex Click Pen mechanism. Vertex Click Pen - https://www.pennstateind.com/store/PKFP4010.html Instagram; @LL_woodworks www.LL-Woodworks.net Facebook; https://www.facebook.com/LL-Woodworks-397970183658553/ Disclaimer: My videos represent how I go about my woodworking. They are for your entertainment and not instruction. My safety is MY responsibility and YOUR safety is YOUR responsibility. Before beginning any woodworking be familiar with your equipment and always - always wear the proper personal protective equipment. When performed safely, woodworking can be fun and rewarding. Keep it fun by working safe.

 

pen making without a mandrel
By: Woody Turner
November 21, 2016 · 2,381 views

Produced with CyberLink PowerDirector 15

 

Pens By Jesse - Turning A Click Pen
By: Jesse DiMura
November 16, 2016 · 28 views

A video on how I turned a click pen.

 

How To Use Multiple Materials in Pen Segmentation
By: Lynn Lacey
November 15, 2016 · 4,408 views

Today we explore how to use multiple materials in making a segmented pen blank. We'll use an Alumilite blank, aluminum strips and spalted maple. http://www.toymakingplans.com/website/PlanSets/scrollsawmagic-commando-helicopter.html Instagram; @LL_woodworks www.LL-Woodworks.net Facebook; https://www.facebook.com/LL-Woodworks-397970183658553/ Disclaimer: My videos represent how I go about my woodworking. They are for your entertainment and not instruction. My safety is MY responsibility and YOUR safety is YOUR responsibility. Before beginning any woodworking be familiar with your equipment and always - always wear the proper personal protective equipment. When performed safely, woodworking can be fun and rewarding. Keep it fun by working safe.

 

Le PicBois - How To Make A Pen
By: Le PicBois
November 13, 2016 · 2,681 views

[ Here's how to make a slimline pen with ash wood scrap ] Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois Thanks to ALL my supporters on Patreon: Luis Gonzales, Ento Hamelin, Carl Jacobson, Olivier Coursol, Elaine Go, Brandon C., Corey Neuman, Tony Dew, Benoit Pelletier, Make Something, Get Hands Dirty, Jamie Page, Jackman Works, Scott Haun, Francis LaBrie, Alain Lebarbé & Jayson Nuckolls. You really make a difference! Thank you so much! I work for free and I pay my director with cookies… Please help me to buy some flour by clicking on the link below: https://www.paypal.me/lepicbois

 

WTF Pen Mandrel?
By: R4X Woodturning
November 12, 2016 · 465 views

Something is up with my pen mandrel that I just bought to replace another one that was doing the exact same thing.

 

How I Square a Pen Blank
By: Lynn Lacey
November 10, 2016 · 8,236 views

In this video I show you How I square or trim a pen blank in preparation for turning. Transfer Punches - http://amzn.to/2eFfBQY 60 Grit Adhesive Back - http://amzn.to/2eFbdRN RJB Woodturner - https://www.youtube.com/channel/UCmmCqkA0iEdwVsaS7kVwGLw Instagram; @LL_woodworks www.LL-Woodworks.net Facebook; https://www.facebook.com/LL-Woodworks-397970183658553/ Disclaimer: My videos represent how I go about my woodworking. They are for your entertainment and not instruction. My safety is MY responsibility and YOUR safety is YOUR responsibility. Before beginning any woodworking be familiar with your equipment and always - always wear the proper personal protective equipment. When performed safely, woodworking can be fun and rewarding. Keep it fun by working safe.

 

Designer Twist Pen - Gun Metal and Zebra Wood
By: Chapman Crafters
November 10, 2016 · 258 views

Designer Twist Pen - Gun Metal and Zebra Wood - - - - - - Please watch: 'DYI - Silicone Mold for Pen Blanks' https://www.youtube.com/watch?v _engdA0K-wQ - - - - - -

 

Gluing Pen Tubes with Epoxy
By: Lisburn Wood Works
October 30, 2016 · 930 views

Correction: At one point I said '5 part epoxy.' I meant 5 minute epoxy. Note: I do not sand or use any cleaning product on tubes before glueing. With epoxy I find these steps unnecessary. The tube I used it this video was pre-sanded from the factory. Link to 30 min epoxy I used: https://www.amazon.com/Bob-Smith-Industries-BSI-205H-Minute/dp/B0166FFFS4/ref sr_1_1?ie UTF8&qid 1477824543&sr 8-1&keywords 30 minute epoxy

 

Pen Blank Fixes - Version 5 Filling Worm Holes With Silver Powder
By: RJBWoodTurner
October 23, 2016 · 2,315 views

I was turning a Pecan blank and found several work holes in the blank. One of the guys in my turners club gave me some silver powder so I decided to fill the holes with it. I think it looks amazing. Regards, Bob Silver Powder Information From The Jar: #663 Silver Jacquard Products by Rupert, Gibbon & Spider Inc. Healdburg, GA 95488 USA Contents: 3 gm Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Hut Ultra Gloss vs PlastX
By: RJBWoodTurner
October 22, 2016 · 2,065 views

People keep telling me about PlastX polish for polishing pens. I have used Hut Ultra Gloss for a long time and really like the product. Curiosity got the best of me so I purchased a bottle of PlastX and decided to try it next to Hut. Personally I cant tell a difference, both performed extremely well and gave me the result I look for in a pen. I plan to use the PlastX exclusively for a period of time to see if my opinion changes but for now, I say they are equal and I'd buy the cheaper of the two products. Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Pen Press Upgrade - How I Improved My Pen Press
By: RJBWoodTurner
October 22, 2016 · 4,316 views

For a long time now I have wanted to make this simple improvement to my press. Now that I have done it, I couldn't be happier. Adjustments are lightning fast and easier than ever. Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Pen Blank Fixes - Video 4
By: RJBWoodTurner
October 16, 2016 · 1,692 views

Another installment in the Pen Blank Fixes series. I had a Purple Heart Seam Ripper that had a hazy area in it. I also had several blanks that the tubes did not fully insert before the glue grabbed. I fixed and sized them to turn the blanks. Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Pen Making: Sanding Process
By: Pen Turners Corner
October 13, 2016 · 26 views

I show you what it takes to sand a pen and buff it before assembly. Follow My Tumblr: penturnerscorner.tumblr.com Join My Facebook Group: https://www.facebook.com/groups/1046220935497756

 

Around The Shop Episode 8 - Trimming Brass Tubes
By: RJBWoodTurner
October 11, 2016 · 1,180 views

Occasionally when I trim a 7mm blank, I get a little overhang. This video explains why and how to avoid it. Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Around The Shop Episode 7 - Correcting Custom Cut Brass Tubes
By: RJBWoodTurner
October 10, 2016 · 1,930 views

When cutting brass tubes to make custom pens, sometimes the ends of the tubes become deformed. In this video I demonstrate my method for correcting that deformity. Bob Modified Slimline Mechanical Pencil: https://youtu.be/nZSbJhl_xTk Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

DYI - Personalized Sequin/Allumilite and Birds Eye Maple Pen Turning
By: Chapman Crafters
October 07, 2016 · 1,313 views

This is a pen that I made out of some birds eye maple and a allumilite blank that my wife made from sequins . RJB Woodturner Bead Blank Video - https://youtu.be/sK8OnOWmPKE - - - - - - Please watch: 'DYI - Silicone Mold for Pen Blanks' https://www.youtube.com/watch?v _engdA0K-wQ - - - - - -

 

Making a Laser cut pen blank, assembly and gluing to finishing, Pen making
By: Chad Schimmel
October 04, 2016 · 14,484 views

In this video I'll show you how to assemble, glue, and finish a laser cut pen blank, This is a pen making video. Blanks used are Here-- http://goo.gl/svWDvM Mercury CA Glue can be found here -- http://goo.gl/UETgUW For more pen making and turning info visit www.turnerswarehouse.com Please subscribe and thanks for watching!! Here are the tools and equipment I use, I have included these amazon links because I get a commsion if these items are purchased. I only ask if you are going to buy them anyway please use these links and that will help the show and the shop. Thank you Jet 12

 

DYI - Turning Allumilite Rubber Band Pen
By: Chapman Crafters
October 03, 2016 · 1,064 views

This is a pen blank that my wife has made with Allumilite Clear and colorful rubber bands from the craft section. - - - - - - Please watch: 'DYI - Silicone Mold for Pen Blanks' https://www.youtube.com/watch?v _engdA0K-wQ - - - - - -

 

DIY - Laser Personalized Breast Cancer Ribbon Pen
By: Chapman Crafters
September 30, 2016 · 665 views

Laser Personalized Breast Cancer Ribbon - This is a pen that my wife requested for her aunt that is a breast cancer survivor. I used my laser engraver that I got from gearbest.com NEJE DK-8 Pro-5 500mW Laser Engraver Printer - 500MW BLACK http://www.gearbest.com/3d-printers-3d-printer-kits/pp_242560.html 7mm Slim Style Breast Cancer Awareness Pen Kit Chrome - See more at: http://www.woodcraft.com/product/158714/7mm-slim-style-breast-cancer-awareness-pen-kit-chrome.aspx#sthash.7V6JIwfP.dpuf - - - - - - Please watch: 'DYI - Silicone Mold for Pen Blanks' https://www.youtube.com/watch?v _engdA0K-wQ - - - - - -

 

Repairing Pen Blanks - Video 3
By: RJBWoodTurner
September 22, 2016 · 2,047 views

This is the third in a series of pen fix videos. Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

penpress
By: Jürgen Glaser
September 21, 2016 · 1,107 views

Heute zeige ich Euch, wie ich meine Schreibgerätepresse gebaut habe.

 

Fixing the threads on a JR Series pen Kit. Pen Making
By: Chad Schimmel
September 17, 2016 · 1,357 views

This problem was common on the original cheaper jr 1 pens but has become less of a problem. That being said it still happens from time to time to most capped pens. IF you like the video please give me a thumbs up and subscribe to the channel. To make pens visit www.turnerswarehouse.com for kits, blanks and supplies. Thanks for watching Here are the tools and equipment I use, I have included these amazon links because I get a commsion if these items are purchased. I only ask if you are going to buy them anyway please use these links and that will help the show and the shop. Tha

 

If You Don't Try How will you know
By: dc9apu
September 15, 2016 · 594 views

This video is about If You Don't Try How will you know if it will work For Cholla cactus and other woods contact Sam Beam at chollawood@icloud.com Sams E Bay page http://www.ebay.com/itm/Large-RAW-Juniper-Live-Edge-Burled-Duck-Call-Blanks-Woodworking-Rare-Woods-/222412196276?hash item33c8ccc9b4:g:Kw4AAOSw4CFYphCJ

 

Repairing Pen Blanks - Video 2
By: RJBWoodTurner
September 14, 2016 · 2,697 views

This is the second video covering some of the fixes I need to make to the pen blanks I'm preparing for a craft show. Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Repairing Pen Blanks - Video 1
By: RJBWoodTurner
September 13, 2016 · 2,793 views

I am preparing 59 pens, mechanical pencils, and seam rippers for a craft show. When preparing this many items at once there are always issues, some small and some not so small. I decided to make a video of my issues and what I did to repair my blanks. This is the first video demonstrating some of the initial fixes. There are quite a few more blanks needing attention and there will be additional videos addressing each and every repair. Regards, Bob Steve Twydell - Templeboy Turnings: https://www.youtube.com/user/stevo15771 RJBWoodturner: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Preparing A Large Number Of Pen Blanks For A Craft Show
By: RJBWoodTurner
September 10, 2016 · 10,186 views

This is the second video I've made about preparing pens for my craft show. I cover the preparation process and show each step I go through. At the end of this video, all my blanks are fully prepped and ready to turn. Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Crown Jewel Promo Video
By: 1st Class Pen Company
September 10, 2016 · 59 views

Here is how the infamous Crushed Pink Pearl Crown Jewel Pen came to be! And many more just like it!!! Please visit our Etsy shop to see this and all of our other exciting pens : https://www.etsy.com/shop/1stClassPenCo Follow us on FaceBook at: https://www.facebook.com/1stClassPenCo/ And Don't forget about Instagram!!! https://www.instagram.com/1stclasspenco/ Music: Claire de Lune by Claude Debussy

 

Around The Shop Episode 4 - Making Custom Pen Tubes
By: RJBWoodTurner
September 05, 2016 · 1,784 views

I was disassembling some pens to remake them for an upcoming show. Once a tube has been used, I don't like to reuse it because the brass stretches and it doesn't hold the pen parts as well. I like making my own tubes because its more economical. I also use this method to make custom length tubes for modified pens. Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Apollo Infinity in Leopardwood
By: 1st Class Pen Company
August 29, 2016 · 1,810 views

1st Class Pen Co would like to introduce our 1st video and the Apollo Infinity Rollerball pen in Leopardwood. We are sure that some of you are curious about what goes into creating the pens in our shop. This video is meant to give you an idea!!! Here is this listing: https://www.etsy.com/listing/462136524/hand-made-rollerball-pen-custom-olympian Please visit our Esty shop at: https://www.etsy.com/shop/1stClassPenCo?ref hdr_shop_menu And our Facebook page at: https://www.facebook.com/1stClassPenCo/ And you can follow us on Instagram at: https://www.instagram.com/1stclasspenco/ Music: 'Rhapsody in Blue' by George Gershwin and 101 String Orchestra

 

European & Slim line pens
By: Pen Turners Corner
August 21, 2016 · 22 views

I turn pens and I like to make videos and show my work. What do you think?

 

Segmenting Pen Video Part 1
By: Gabe Castro
August 14, 2016 · 521 views

Part 1 Pen segmenting video download (3.6 G) MP4 format available at exoticwoodpen.com, over 3 hours of step by step process and jigs used to make these two pens. 10.00 via PayPal under the Segmented video on demand tab.

 

High Gloss Finish of European Style Pen
By: Pen Turners Corner
August 14, 2016 · 67 views

Shining up a to be european style

 

Hold Fast Live Center and Pen Mandrel
By: TMIProducts1
August 12, 2016 · 1,050 views

Highest precision live center pen mandrel system available to create superior pens. Updated video!

 

HowTo Make A Pen ( Acrylic ) Alex's WoodTurning
By: Alex's WoodTurning
July 04, 2016 · 729 views

Hello everyone my name is Alex and I'm 12 years old , I'm a beginner WoodTurner I love looking at a piece of wood and thinking it can be a useful house hold item.Such as a Cheese Knives, Pens and Many more don't forget to like and subscribe if you want more content like this Enjoy! Mike Waldt's Channel: https://www.youtube.com/user/TheCymruBoy TimberBits: www.timberbits.com Carl Jacobson's Channel: http://www.youtube.com/user/haydenHD Previous Video: http://www.youtube.com/watch?v 1P-L6xH9Y9o

 

Turning a pen 'between centers'
By: Ed Brown
June 15, 2016 · 2,167 views

Ed turns the blank for the new Motorcycle pen, from Berea. Bushings were not yet available, so the 'between centers' method was helpful.

 

How to make a slimline pen that you can sell or gift
By: Chad Schimmel
June 09, 2016 · 6,464 views

This video shows you how to make a slimline pen kit. Dont over look this kit its a great pen! IF you like the video give it a thumbs up and don't forget to subscribe to the channel. Kits and Blanks used Antique Brass Fancy Slimline https://goo.gl/5B2b9G Curly Koa wood blank https://goo.gl/enJmsn See you next time!!!! Here are the tools and equipment I use, I have included these amazon links because I get a commission if these items are purchased. I only ask if you are going to buy them anyway please use these links and that will help the show and the shop. Thank you Jet 1221 lathe

 

Perfect Fit pen assembly instructions
By: Ed Brown
May 18, 2016 · 904 views

How to assemble the perfect fit pen. Comments encouraged, since I am planning a series of these vids for assembly instructions.

 

Perfect fit pen in alt briar--measuring & cutting tenon
By: Ed Brown
May 13, 2016 · 494 views

Perfect fit pen is turned and the 'tenon' is measured and cut.

 

Pen Segmenting
By: Gabe Castro
May 08, 2016 · 945 views

Part 1 and 2 , Segmenting with Basic Tools and jigs available for download at my Website at exoticwoodpen.com for 10.00, over three hours of step by step instructions, (3.6 G) MP4 file download for part 1, and almost 3 hours of video in part 2 (3.1 G) MP4 file download. 10.00.

 

turning hand-made blanks-grouse feather ellipse
By: Ed Brown
May 01, 2016 · 884 views

Turning hand-made blanks--some 'do's and don'ts' that will enhance your success ratio

 

Pen trouble--how to fix 'kit pens' #1
By: Ed Brown
April 28, 2016 · 1,719 views

Troubleshoot your pen, if it does not work!!

 

Casting, turning and assembling a pen for our friend Kali
By: As The Wood Turned
April 27, 2016 · 56 views

Casting, turning and assembling a pen from Alumilite

 

Patriotic Pen
By: Make Crazydays
March 24, 2016 · 656 views

This is our entry for the Stress Free Woodworks Patriotic Pen Challenge. We had a couple false starts and complete redesign of what we attempted, but in the end we managed to pull through and make a few nice pens for James Green to send to our soldiers. Homepage: http://make.crazydays.org Shop: https://make.crazydays.org/shop/ Instagram: https://www.instagram.com/makecrazydays

 

Turning Alumilite Pen Blanks with Various Tools, Wood Turning 101
By: Turning Round
February 29, 2016 · 1,074 views

In this video I am Turning Alumilite Pen Blanks with various Tools. This is part of my wood turning 101 series. I do the same pen over and over and show different turning techniques and examples of turning with all of my turning tools.

 

A Pen Maker's Canvas Part 1 - Design, Cutting, Glue up Segmented Blank
By: Lynn Lacey
February 06, 2016 · 3,954 views

How to Make a segmented pen blank. In this first of a three parts series titled 'A Pen Maker's Canvas' We look at design considerations, cutting the pieces and gluing up of a Segmented Pen Blank. Contact Texas Wood House at - texaswoodhouse2@gmail.com

 

Home made pen tool, how to take apart pens.
By: Gabe Castro
January 02, 2016 · 941 views

For less that a buck, you can make this simple tool to take apart wood pens. exoticwoodpen.com

 

Cigar pen assembly using drill press
By: Gabe Castro
October 09, 2015 · 329 views

How to use drill press to assemble cigar pen

 

Sierra Click pen assembly using drill press
By: Gabe Castro
October 09, 2015 · 382 views

Easy pen assembly using drill press with simple to make jig.

 

Pen milling
By: Gabe Castro
September 29, 2015 · 57 views

Using a tapered drill bit to clean up brass pen tube after using pen mill

 

mosaic CE--turning methods
By: Ed Brown
September 14, 2015 · 2,551 views

Ed turns the alumilite with mosaic chips. Using different tools, to show possible problems and solution.

 

How to make real wood ink pens
By: Abston Wood Crafts
September 07, 2015 · 2,401 views

Making real wood ink pens is a fun hobby and a great way to learn about wood turning. I've made several of these that I have sold and others that I've given as gifts. Here's a short video of me making the pens I sell. Click the link to see the current pens I have available. https://www.etsy.com/shop/AbstonWoodCrafts

 

Spalted Maple Bolt Action Bullet Pen
By: Make Crazydays
September 03, 2015 · 10,499 views

While browsing at a local Woodcraft with my wife I came across this great bolt action bullet pen kit. So I picked one up to turn a pen for the local gun shop owner in town. Originally I started with some leopard wood, but when drilling it out I split the end. Then I tried a zebra wood blank, which I shattered an end when using the barrel trimmer. So in the end I went back to the spalted maple and wound up with a pretty decent looking pen. Gun Shop: http://www.palladiumgunshop.com/ Homepage: http://make.crazydays.org Shop: https://make.crazydays.org/shop/ Instagram: https://www.instagram.com/makecrazydays/ Music: Josh Woodward - DD Groove: http://freemusicarchive.org/music/Josh_Woodward

 

Lever Action
By: Berea Hardwoods
August 27, 2015 · 3,257 views

 

fountain pen nib disassembly Exoticblanks and Baron front section and
By: Ed Brown
August 20, 2015 · 667 views

QUICK vid on taking apart Berea 'kit' fountain pen nibs. No sound, just an unedited video.

 

Pen Blank Drilling Jig
By: Jerry Brown
August 12, 2015 · 1,256 views

I had an opportunity to get this one used online and it works great. I was going to make a nice Pen out of the Lacewood however I hit a couple of knots and I tell you it is always a risk with pen blanks of an unknown origin but it is still sad. So no pen tonight! I have plans drawn up for the dust collection to get mounted under the bench so I am going to get to starting that.

 

Desk Sized Pen Display
By: Jerry Brown
August 07, 2015 · 788 views

A custom order was placed and hopefully the customer will like it, got some scrollsaw work soon if I get some tape ... and tons of other projects too many I say and still working on a ton of other stuff along with that dreaded work!

 

 

Lever action assembly and troubleshooting.
By: Ed Brown
July 25, 2015 · 1,378 views

Assembling the lever action pen, and solving the 'clicker doesn't work' problem

 

Pen Display Stand
By: Jerry Brown
July 09, 2015 · 4,639 views

I have a show on Saturday and needed something better than just setting these things on the table. A nice stand for the pens this is the first try and it actually worked! Sorry a 13 hour day and heat stroke yesterday pushed the shop time to almost nothing the last couple days but I am getting back to things!

 

Pen Turning Tools
By: Jamie Coyle
June 17, 2015 · 70 views

Check this link http://www.timberturners.com/TurningProjectKits-s/25.htm right here for more information on Timber Turners pen turning blanks. Making wooden pens in not only an enjoyable hobby, it can also put a few extra dollars in your pocket. Today many people appreciate a fine writing instrument, and what better way to show style than with an elegant, environmentally friendly pen or pencil. Therefore choose the best Timber Turners pen turning blanks. Follow Us: http://penmakingsupplies.tumblr.com/PenTurningKits

 

Timber Turners LLC
By: Jamie Coyle
March 12, 2015 · 55 views

Visit this site http://www.timberturners.com/default.asp for more information on Timber Turners LLC. The ideal project for a wood turner of any level is to create a beautiful writing instrument with inlaid wood accents. Handmade pens make beautiful gifts, and do a great job of displaying the quality of figured wood as well as the expertise and creativity of the woodworker. Pen and turning blanks are available on Timber Turners LLC.

 

Pen Drilling Chuck
By: Jerry Brown
February 14, 2015 · 1,970 views

Project #45 of Polly Wants A Crafters 365 in 2015 - a Pen Drilling Chuck for my Harbor Freight lathe. It is not too bad for a first test, the pen blank is drilled fairly straight a bit loose but usable. This is to inspire all the guys out here to not rely on spending hundreds of dollars on crazy tools but to make what you have help you.

 

pen turning making sanding disk
By: Ed Brown
January 19, 2015 · 3,839 views

Instead of the pen mill, we 'square' the blank after it is mostly turned to shape. This is done on a samding disk, made for the lathe.

 

Pen Blanks Using the Speed Gouge
By: Ron Brown
December 19, 2014 · 1,868 views

Ron turns some difficult wooden pen blanks using a 2' spindle roughing gouge and the 'Speed Gouge'. More info at www.ronbrownsbest.com

 

Steampunk by MIK
By: Ed Brown
October 12, 2014 · 3,514 views

Turning the Steampunk penblank. Some suggestions to help turn polyresin, cast in the 'D' shaped mold. May help you to improve YOUR turning skills.

 

Perfect Fit ballpoint video1
By: Ed Brown
July 27, 2014 · 572 views

Choose a blank, cut and drill on the lathe for a Perfect Fit ballpoint pen.

 

Pen Turning Video: Step-by-Step Pen Making Instructions
By: Pen Turning Texan
July 24, 2014 · 5,055 views

View the full pen turning tutorial here: http://penturningtexan.com/pen-turning-tutorial/ If you're looking for a pen turning video that walks you through the basic steps of pen turning (and links you to highly detailed, external resources for more information) then you've come to the right place! In this video I walk you through every step of the pen making process, and also link you to more detailed, step-by-step tutorials wherever necessary to make sure that you have all of the resources that you need to turn a pen from start to finish.

 

Drill press aligning--getting perpendicular, straight holes
By: Ed Brown
June 24, 2014 · 33,194 views

Drilling straight holes on the drill press

 

Pen Making, Making a pen from Alaskan Whale Bone at the Schimmel Shop
By: Chad Schimmel
June 20, 2014 · 8,648 views

In this video I make a pen from some whale bone that I got in Alaska. IF you like the video give it a thumbs up and don't forget to subscribe to the channel. Featured Vendor, Fastcap. Everything you need. Www.fastcap.com I use molds from Fred Wissen at http://www.ptownsubbie.com If you are looking for custom pen blanks that I made please check out my ebay store at http://www.ebay.com/sch/schimmelsdust/m.html?item 201012656910&rt nc&_trksid p2047675.l2562 For finished pens made by Chad Schimmel visit www.impeccablepen.com Be sure and subscribe for new videos every Friday. Music By Call to Adventure Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/ For other questions on pen making please post a comment or email chadschimmel@gmail.com For business inquires please email chadschimmel@gmail.com

 

Making a Pen from Colored pencils. Blanks and molds with alumilite
By: Chad Schimmel
June 18, 2014 · 8,419 views

Here is how I made pen blanks from colored pencils and resin. IF you like the video give it a thumbs up and don't forget to subscribe to the channel. Featured Vendor, Fastcap. Everything you need. Www.fastcap.com I use molds from Fred Wissen at http://www.ptownsubbie.com If you are looking for custom pen blanks that I made please check out my ebay store at http://www.ebay.com/sch/schimmelsdust/m.html?item 201012656910&rt nc&_trksid p2047675.l2562 For finished pens may by Chad Schimmel visit www.impeccablepen.com Be sure and subscribe for new videos every Friday. For other questions on pen making please post a comment or email chadschimmel@gmail.com For business inquires please email chadschimmel@gmail.com

 

Pen Turning Made Easy Pt2
By: Woodcraft of Spokane
June 09, 2014 · 5,325 views

This is part 2 of 2, where Joel walks us through the steps in turning and finishing a pen. Sit back and relax while you observe how easy it is to turn a pen. Remember, pens are great for holiday gifts or special occasions. Add a laser engraved name to customize and you have the Ahh Gift.

 

Pen Turning Made Easy
By: Woodcraft of Spokane
June 09, 2014 · 12,066 views

This is part 1 of 2, where Joel walks us through the steps in turning and finishing a pen. Sit back and relax while you observe how easy it is to turn a pen. Remember, pens are great for holiday gifts or special occasions. Add a laser engraved name to customize and you have the Ah Ha Gift.

 

Tornadic Twists Atrax pen
By: Ed Brown
May 26, 2014 · 4,640 views

Making a pen from new 'TornadicTwists' pen blanks from ExoticBlanks.com How to locate center, drill properly, 'reverse paint' and even fill air bubbles you might encounter on this or any other resin blank.

 

atrax or triton ftn pen
By: Ed Brown
May 01, 2014 · 1,067 views

Turning the fountain pen from Fantastic Feather blanks. Also we do 'facing' on the lathe. This is part one--part two will have polishing the blanks with Novus and assembling the Atrax fountain pen.

 

cebloplast drill-turning tips#1
By: Ed Brown
March 09, 2014 · 637 views

How to drill cebloplast for a pen

 

Pen Making Review of Dr Kirks finishing Wax for acyrlic and CA finished pens.
By: Chad Schimmel
January 17, 2014 · 2,127 views

This is a video to show first use of Dr Kirks Finishing Wax IF you like the video give it a thumbs up and don't forget to subscribe to the channel. My preferred place to buy my pen parts is Exotic Blanks, www.exoticblanks.com I use molds from Fred Wissen at http://www.ptownsubbie.com If you are looking for custom pen blanks that I made please check out my ebay store at http://www.ebay.com/sch/schimmelsdust/m.html?item 201012656910&rt nc&_trksid p2047675.l2562 For finished pens may by Chad Schimmel visit www.impeccablepen.com Be sure and subscribe for new videos every Friday. Music By Call to Adventure Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/ For other questions on pen making please post a comment or email chadschimmel@gmail.com For business inquires please email chadschimmel@gmail.com

 

Acrylic pen--beginning tutorial
By: Ed Brown
December 29, 2013 · 17,365 views

Translating the principles of wood turning to apply to plastic.

 

stylus replacement on sierra
By: Ed Brown
December 15, 2013 · 536 views

Replacing the stylus on the sierra stylus pen.

 

Sunday night movie--12-1-13--reinforcing wood blanks and turning a pen
By: Ed Brown
December 01, 2013 · 2,365 views

Turning a pen from very dry wood blanks--in this case , black palm. Using CA glue to reinforce and turn to pen size.

 

pen-turning without brass tubes, making bushings at home!!
By: Ed Brown
November 17, 2013 · 20,422 views

We make bushings and turn 2 pen blanks without the brass tubes. Useful to determine the best color to 'reverse paint' or for making 'demonstrator pens.

 

Sunday night2--Why and what color to paint tube or backpaint
By: Ed Brown
November 03, 2013 · 919 views

We determine what color tube or 'backpainting' will look good with this pen

 

Turning plastic poorly
By: Ed Brown
October 20, 2013 · 2,507 views

How you can improve your technique on turning plastic pen blanks

 

Pen turning-facing on the lathe with sandpaper
By: Ed Brown
August 18, 2013 · 1,532 views

Shows how to face a blank on the lathe, using sandpaper. This method puts much less stress on the blank, so it is especially good for wood burls or resins that could easily be cracked with a 'pen mill'. In addition this never needs to be sharpened!! The material used is the new Maj'K blanks from ExoticBlanks.com

 

fountain pen assembly baron or sedona
By: Ed Brown
June 25, 2013 · 5,317 views

Fountain pen assembly--using the Baron from ExoticBlanks.com

 

Pen Blank Truing Jig for your Lathe using a Router
By: Jerry Brown
May 08, 2013 · 1,342 views

I made a quick jig after spending time roughing blanks all morning and resharpening the chisels. Snap on the jig, fire up the palm router and make some better roughed out blanks.

 

Pen Turning Finishes Pt4
By: Woodcraft of Spokane
February 28, 2013 · 2,840 views

This is the last segment of our 4 part series on applying Finishes and Polishes to lathe projects such as pens . . .This was intended to be a short 15 minute demonstration, however, as I began the editing process I found that John simply provided so much valuable information it would be a disservice to cut anything out. So, we are providing a four part video series to ensure you don't miss a thing. John demonstrates one more technique for applying a CA glue finish to achieve that high gloss look along with it's characteristic of a very hard, long lasting, finish. He discusses various types of liquid finishes and explains the difference between polishes and finishes.

 

Pen Turning Finishes Pt3
By: Woodcraft of Spokane
February 26, 2013 · 3,820 views

This is part 3 of our 4 part series on applying Finishes and Polishes to lathe projects such as pens . . .

 

Pen Turning Finishes Pt2
By: Woodcraft of Spokane
February 25, 2013 · 5,689 views

This is part 2 of our 4 part series on applying Finishes and Polishes to lathe projects such as pens . . .

 

Pen Turning - Applying Finishes and Polishes Part 1
By: Woodcraft of Spokane
February 25, 2013 · 11,928 views

This was intended to be a short 15 minute demonstration, however, as I began the editing process I found that John simply provided so much valuable information it would be a disservice to cut anything out. So, we are providing a four part video series to ensure you don't miss a thing. John demonstrates one more technique for applying a CA glue finish to achieve that high gloss look along with it's characteristic of a very hard, long lasting, finish. He discusses various types of liquid finishes and explains the difference between polishes and finishes. So let's get started . . .

 

Record Power's Basic Pen Making Tutorial with Alan Holtham
By: Record Power
February 11, 2013 · 39,194 views

Alan guides you through the entire process of pen making, from preparing the blank to finishing on the lathe.

 

CA Finishing and Pen DVD Preview with Ron Brown
By: Ron Brown
October 04, 2012 · 2,404 views

Ron's CA finishing method and preview of new pen turning DVD released Oct, 2012.

 

Beginning Pen Making Part 1, Pen Styles, Tools, and Getting Started. Basic Pen Turning explained
By: Chad Schimmel
August 29, 2012 · 79,111 views

Beginning Pen Making Part 1, Pen Styles, Tools, and Getting Started. In this part one of Beginning Pen making I will review the types of pens you can make and what you will need to get started. Next Episode, Making a Slimline Pen. New starter sets added to Turners Warehouse. Check under the Tools section! If you are looking for great custom pen blanks and pen kits and parts please check out my supply site at www.turnerswarehouse.com Be sure and subscribe to the channel for future episodes.

 

Custom Pen Press Demonstration
By: TheHobbyHutt
August 05, 2012 · 775 views

A lacquer finish on a wood pen.

 

Prepping the Wood and Kit
By: Lance Baldwin
April 11, 2012 · 74 views

Explains to students how to get their kits ready to cut and glue.

 

Pen Making Video 1
By: Feeney Pens
March 05, 2012 · 543 views

 

PEN MAKING TIP: BARREL TRIMMING on the Drill Press
By: WYOMINGWOODTURNER
February 17, 2012 · 13,566 views

This short demonstration shows how to trim a pen blank barrel on the drill press

 

Penturning with ProVac Micro
By: ProVacInfo
November 12, 2011 · 372 views

Useful for penturning and smaller jobs.

 

Pen Wizard Tips - Part 3
By: penturners
March 02, 2009 · 10,467 views

More Beall Pen Wizard tips from Ed Davidson (YoYoSpin)

 

Ed's Poly Resin 'Bucks' - Part 1: Blank Prep
By: penturners
December 31, 2008 · 9,605 views

Ed's Poly Resin 'Bucks' (Shredded U.S. Currency Pen Blanks) - by Ed Davidson (YoYoSpin)

 

Pen Wizard Tips - Part 2
By: penturners
December 29, 2008 · 20,313 views

More tips from Ed Davidson (YoYoSpin) on using the Beall Pen Wizard

 

Pen Wizard Tips - Part 1
By: penturners
December 29, 2008 · 13,432 views

Ed Davidson (YoYoSpin) shows us some tips on using the Beall Pen Wizard.

 

Return to Turning Videos

Powered by Google

Great Bargains


Free Shipping on All Rockler Orders $35+ every day in February and March, just click here


Rockler Full-Size Ergonomic Carbide Turning Tools

On Sale for only $79.99 each

Save $30.00 each


List price: $109.99

Available with Square Cutter
Click here for more information or to purchase

Available with Square Radius Cutter
Click here for more information or to purchase

Available with Round Cutter
Click here for more information or to purchase

Available with Diamond Cutter
Click here for more information or to purchase


Nova G3 Comet II Reversible Chuck

On Sale for only $125.99 each

Save $64.00 each


List price: $189.99

Click here for more information or to purchase


Excelsior 5-Speed Mini Lathe With Free Bed Extension

On Sale for only $299.99 each

Save $75.59 each


List price: $375.58

Click here for more information or to purchase

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

The Studios' of Bradley R.M.
Rubber Chucky Products
Imaginlay

(Click any Ad to go to our Sponsor's Website)