Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Safety Videos (68)

Sort by

Or click here to: Search All Videos


Head Gear for Woodturning
By: Mike Peace Woodturning
February 12, 2019 · 2,782 views

I show various options to keep shavings out of your hair when woodturning. I also give some shoutouts and talk about recent events. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning.LInk to the Skull Caps shown in this video https://amzn.to/2WPMa5Q You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3/other-woodturning-resources

 

A RickTurns Cautionary Tale
By: RickTurns
December 22, 2018 · 8,214 views

Cautionary tale, as in 'don't do this!'. Oh yeah, and some small Christmas trees are turned to decorate a bowl. The music during the close of the video, 'Happy Little Elves' by Audionautix, is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Who Uses the Safety Guard on a Wood Lathe?
By: Mike Peace Woodturning
November 06, 2018 · 3,174 views

I demonstrate using the safety guard on my Powermatic 3520 that many woodturners scrap. I demonstrate how it has little impact on any aspect of turning a bowl as I turn the outside of a severely cracked rough turned cherry bowl. I sand the outside and texture and turn the inside without difficulty. If you have a safety cage on your lathe, you might try using it on a hazardous turning due to cracks, voids or an imbalance. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Turn Talk #5 - Shop Safety PSA
By: Billy Burt
November 05, 2018 · 127 views

I decided to call this particular series Turn Talk. Here I will discuss various turning topics that aren't really quick tips, not shop updates and not turning projects. In this episode I talk about shop safety. Failing to properly protect yourself is dangerous. You can lose appendages and worse by being careless and ignoring established safety procedures and practices. Safety should be a habit! If you have questions about anything you've seen me do, ask away. I have pretty thick skin and am not easily offended. I do my best to respond to every comment and question. Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug

 

Ron Gerton Safety Demonstration
By: American Association of Woodturners
February 08, 2018 · 94 views

This clip is from Ron Gerton's presentation at the AAW Tampa 2013 Symposium on safety. Ron is a retired mechanical engineer with more than 30 years of experience in nuclear field. Ron's messages in working safe and sharing safety tips.

 

Splinters?
By: Mike Peace Woodturning
December 19, 2017 · 1,588 views

I respond to some viewer comments including the importance of having tweezers handy for those splinters we wood turners tend to get sometimes! I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

First Aid for Wood Turners
By: Mike Peace Woodturning
December 05, 2017 · 1,979 views

I provide a few tips on how I prepare to provide first aid for a major or minor accident iin your wood turning shop. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Woodturning - protect yourself - I'm ok
By: Marc 's Oneway of turning
September 04, 2017 · 862 views

 

What's in your First Aid Kit?: Quick tip Tuesday On Shop Safety Sam Angelo
By: WYOMINGWOODTURNER
August 28, 2017 · 2,560 views

Sam asks an important question: Do you know what is in your first aid Kit? After looking in his own kit, Sam discovers items he did not know were there. He also reflects on a serious accident he had two years ago and offers some sound recommendations for your own shop safety. The message? What is needed in the First Aid Kit in YOUR shop? To see my work, visit samangelo.com or wyomingwoodturner.com

 

It Popped Right Off (and darn near hit me in the face)
By: Jerry Paul
July 14, 2017 · 991 views

I really need to get a proper face shield. Thanks to a couple of donations I received recently, I'll be able to get one soon. :) Thankfully I got myself out of the way this time. Next time I may not be so lucky. There were a few mistakes that I made that I can now see in hindsight, but hindsight won't keep you from getting wood in the face! ... It didn't hit me, but it came close. Play safe everyone! https://www.paypal.com/cgi-bin/webscr?cmd _donations&business RK3D9P3RLYDFU&lc CA&item_name Jerry%20Paul%20TreeCreations¤cy_code CAD&bn PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted Snail mail: Jerry Paul Box 233 Kamsack, Saskatchewan Canada S0A 1S0

 

Danger Zone! Bowl vs Face Shield! Woodturning Safety
By: Carl Jacobson
May 30, 2017 · 29,890 views

Face Shield: http://amzn.to/2zgROCF I had a little accident last night on twitch! I was working on a natural edge bowl, and it came off the lathe and hit me. This is why you should always wear your face shield :) My Etsy shop: https://www.etsy.com/shop/Thewoodshoptv Patreon: https://www.patreon.com/CarlJacobson Website http://www.thewoodshop.tv/ Instagram: https://www.instagram.com/carljacobson/ Facebook https://www.facebook.com/carljacobson68 I'm a Robust dealer if you have any questions I'd be more than happy to help. Robust Woodturning Tools-http://www.turnrobust.com/ Easy Wood Tools-ht

 

Sometimes bowl turning can be explosive.
By: Nick Rosato
April 13, 2017 · 313 views

I was making the last cut on a bowl when this happened. Sometimes things don't go as you hope.

 

# 266 Brief Safety Review
By: Cap'n Eddie Castelin
February 24, 2017 · 7,378 views

Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at capneddiecastelin@gmail.com or www.eddiecastelin.com

 

What happens when you rush in work - woodturning
By: Jake Gevorgian
February 02, 2017 · 5,218 views

The video shows how can a tool catch destroy the piece due to the wrong working phase. Conclusion The wood was a spalted beechwood that has hard and soft fibers due to spalting. The catch presented a very strong blow to the soft aspect of the wood and broke it. The correct way of shaping the opening of this lid would have been progressive light cuts with the use of smaller chisels. The thickness of the mortise walls are also a big factor—if the mortise walls were thicker, then it would withstand the blow shown in this catch. Dangers are unforeseeable, therefore wearing face and headtop shields are necessary while operating lathe machine.

 

Как делать нельзя (How to do the impossible)
By: Аleksey Bek
January 16, 2017 · 13,711 views

Внимание!!! Экстремальное видео! Прежде, чем ставить дизлайк, подумайте! Я не стал убирать осечку, а наоборот решил показать всем.Работа на токарном станке требует внимательности. Бывает, что заготовка или ее часть может разлететься по сторонам. Attention!!! Extreme video! Before you put dislike, think! I did not remove the misfire, but rather decided to show everyone.Work on a lathe requires care. It happens that the workpiece or part may fly around.

 

To Glove or Not # 61
By: The Wood Whirler
January 04, 2017 · 1,328 views

I wear gloves when I turn and here's why.

 

Wood Turning - Extraction and PPE - My kit and views.
By: Mike Waldt
October 16, 2016 · 13,274 views

In response to questions I've had, I go through what I have for extraction, and the PPE (Personal Protection Equipment) I use. Cambridge Mask - http://www.cambridgemask.com/pollution-masks Record Power UK - http://www.recordpower.co.uk/ Axminster Tools & Machinery - http://www.axminster.co.uk/ The Black Dog Workshop - http://www.blackdogworkshop.co.uk/ UKIWS - http://www.ukiws.co.uk

 

Shop Safety 2016
By: As The Wood Turned
April 25, 2016 · 50 views

Our thoughts on shop safety

 

The Perils of Outboard Turning
By: JW Woodturning
April 22, 2016 · 4,749 views

Even as I post this video I'm still a little rattled by it. I have done several large outboard turnings with no issues, but this one fought back. I really want a bigger lathe, partly so I can inboard turn these bigger pieces but also so I can run at a lower speed. The lathe was at its lowest setting which is still 700rpm. My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

#55 What Could Possibly Go Wrong?
By: Yuval Lahav Woodturning
April 15, 2016 · 9,338 views

Some changes are forthcoming, a change of intro and format, but before we go there, let's take a look at some of the things we don't always put on video, which are a whole lesson in itself! Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

What is a Safe Woodturning Lathe Speed?
By: Mike Peace Woodturning
March 23, 2016 · 4,905 views

I explain about safe lathe speed using specific examples from previous videos. I show a formula that can be helpful in determining a safe speed. I provide specific examples for when it is appropriate to go faster or slower for specific turning tasks such as thread chasing and texturing. Filmed and uploaded in HD Check out http://www.mikepeacewoodturning.com/resources-3/ for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers YouTube channel.

 

NOVA Galaxi DVR: Recommended Speeds for Projects
By: NOVA Woodworking
March 10, 2016 · 1,514 views

Take a sneak peek behind the scenes as the NOVA R&D team review various unique software features exclusive to the Galaxi DVR lathe. In this video, we see how easy it is to input project type (hard vs soft wood) project diameter etc and then a recommended speed is given.

 

Safety glasses & face shield is a must
By: Gary Barone woodturner
February 05, 2016 · 245 views

Wood turning safety

 

Î‘Ï„Ï…Ï‡Î·Î Î ÏƒÏ„Î¿Î ÎžÏ…Î»Î¿Ï„Î¿Ï Î Î¿ - Woodturning accident
By: Kostas Annikas Deftereos
January 22, 2016 · 3,755 views

Ατυχημα στον Ξυλοτορνο - καποιες φορες οταν τα πραγματα δεν πανε και τοσο καλα ...... Woodturning accident

 

Woodturning, Accidents Don't Just Happen
By: The Wood Whirler
January 20, 2016 · 2,618 views

I discuss all the areas where accidents can happen if the turner doesn't follow the recommended safety practices.

 

Shop Safety, Wood Turning Safety, Be Careful out there folks.
By: Turning Round
December 09, 2015 · 550 views

This week and for the next 6 weeks I have a lot of time to think about stuff, so I started thinking about shop safety. Proper use of tools, equipment, power tools, wood turning, and safety around the chemicals we use in our shop. I took the time to compile a list and so let's review it.

 

Lathe Safety.....Dust Collection
By: Carl Jacobson
November 09, 2015 · 10,073 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg I want to thank everyone who bid on the vase, I really appreciate your support. Reddit https://www.reddit.com/r/turning/ Tommy Akridge Designs https://www.youtube.com/channel/UCUNNCUn5c0p-GhDna3aK5wQ/feed JP Woodwork https://www.youtube.com/channel/UCw3hBDXx_L_EoSFqqmEuWJQ Christmas Ornament Challenge http://www.aswoodturns.com/challenges/ This year's Challenge Playlist for all ornament video submissions is at https://www.youtube.com/playlist?list... Sponsors - Craft Supplies USA –www.woodt

 

Safety for Woodturners
By: Peter Stewart
October 21, 2015 · 253 views

Hi guys! Today my dad and I will be talking about what we use to protect us from various dangers in the shop such as the standard dust and moving blades, but also some more specific dangers like loud tools and the chemicals in glues and finishes. --------------------------------------------- If you would like a 'Peter Matthew' shop sticker, send me an email! Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080

 

Episode 11: Bloodied Nose & Woodturning Workshop Safety
By: M. Saban Smith Woodturning
October 16, 2015 · 9,673 views

So this week I had an accident which becomes the theme of this week's episode: Workshop Safety. Also, I take a look over the week's work and announce a second demo date at Axminster Tools and Machinery in Basinstoke...plus, next week, Mike Waldt is coming to visit - an episode not to be missed! Here are the links I mention in the video: Sam Angelo's Safety Video: https://www.youtube.com/watch?v kJTC0heY9Q4 My Facebook Page: http://www.facebook.com/msabansmith Hampshire Sheen Channel: https://www.youtube.com/channel/UCZHbStaA0jvlYE25dAtobNQ Check out Hampshire Sheen for a great looking and

 

Turning at a Safe Speed on the Wood Lathe Sam Angelo
By: WYOMINGWOODTURNER
September 23, 2015 · 10,805 views

Sam covers just a few aspects of turning speed when using a wood lathe. With safety in mind, he offers some guidelines for setting the maximum, safest speed when turning.

 

Le PicBois - Fail #1 : I don't think I need a face shield!
By: Pat Lap - Le PicBois
September 19, 2015 · 7,390 views

[ OK, OK I'll buy one! ] ::: LE PICBOIS - AKA THE WOODPECKER ::: Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois Support me on Patreon: https://www.patreon.com/lepicbois I work for free and I pay my director with cookies… Please help me to buy some flour by clicking on the link below: https://www.paypal.com/us/cgi-bin/webscr?cmd _flow&SESSION Eqxer72hzstD4emcu5OgZQyXm9I2ypT2k-PiYKNyeyKlNpjGC7vCQoHglh8&dispatch 5885d80a13c0db1f8e263663d3faee8d96f000117187ac9edec8a65b311f447e - - - - - - Please watch: 'Le PicBois #17 - Beer Glass' https://www.youtube.com/watch?v SOTVj8aPruY - - - - - -

 

Wear Your Face Shield
By: BMac Woodturning
May 25, 2015 · 1,085 views

I got whacked in the mouth before I got the shield down.

 

Reed Gray aka Robo Hippy presents SAFETY TIPS
By: robohippy
May 11, 2015 · 2,871 views

Robo Hippy shares some beneficial safety tips for successful bowl turning on the lathe

 

Shop Safety
By: Roundabout Woodworks
April 18, 2015 · 902 views

A short, somewhat wide ranging talk about shop safety and my thoughts on criticisms. You can read my blog post here: http://roundaboutwoodworks.blogspot.com/2015/04/a-word-about-shop-safety.html

 

Woodturning - sand timer semi-disaster and conclusion
By: Marc 's Oneway of turning
February 12, 2015 · 285 views

You have to be careful with thin glass

 

Woodturning - Sand timer part 1
By: Marc 's Oneway of turning
February 06, 2015 · 363 views

My adventure with that sanding timer and what I did learn along the way. Please note that wearing a watch and a ring during turning activity is dangerous. I forgot to remove them because of the manipulation of the camera. Be safe

 

Safety First On the Lathe---Part 2 (2015)
By: WYOMINGWOODTURNER
January 06, 2015 · 3,397 views

Sam completes the two part series on Lath safety: he covers safe chucking methods, dust protection and other safety issues for the wood lathe. A safety update for 2015

 

Safety First on the Lathe---Part 1 (2015)
By: WYOMINGWOODTURNER
January 05, 2015 · 4,073 views

Sam revisits lathe safety. Part 1 of a 2 part video series.

 

Spindle safety!
By: JuniorTurner01
December 24, 2014 · 124 views

This is basically a summary of sipindle safety. Includes all the basics you need to know.

 

Dangers of Sculptural Woodturning
By: Derek Weidman
December 12, 2014 · 7,712 views

Just an early sneak peak at the crazy things I do to create. This piece had the chance to kill me if I was standing a bit to the left! Stay tuned :)

 

Woodturning Face Shield Steam Punk Style
By: Custom Chris
October 13, 2014 · 1,898 views

I liked Izzy Swan's Steam Punk Inspired Birdhouse So made my woodturning face shield steam punky Izzy's Birdhouse https://www.youtube.com/watch?v i32YRDCAw3M&list UUO39zTYpvWL5jx2q15Ma_Hw Come to my Amazon Store and find all your wood turning needs in one place. Easy to find products. http://astore.amazon.com/customchris-20 If you know a item that needs to be added to the store let me know. Profit go's towards the channel to make it better. For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Lathe Mishap
By: Steve Lindsley
August 10, 2014 · 2,921 views

In this short video I show how dangerous woodturning can be if you're not prepared. Fortunately I was wearing my face shield and was not injured. The only damage was to the bowl that now sits in the shop as a reminder to always expect the unexpected.

 

Danger Of Turning Square Pieces
By: PeteTGIF
July 09, 2014 · 5,820 views

After the successful turning of my square lid last week, I turned this beautiful bowl out of reclaimed dark red meranti with accents out of beech. During and after the turning I encountered some dangers involved with turning square pieces. Please leave a comment, like and subscribe to my channel. Music Funkorama by Kevin McLeod, http://www.incompetech.com Lizenz Creative Commons 3.0 http://creativecommons.org/licenses/by/3.0/deed.de

 

#39 A Word about Tealight Candle Safety
By: Stephen Ogle
June 11, 2014 · 5,563 views

Just a moment to answer some viewer comments and questions about the safety of Tealight candle holders with a shade such as these two recent projects. https://www.youtube.com/watch?v MSItA2iqG0U&list PLGsnYf7PysCQUtNfFEJe2NgkJ5BJ98GHm https://www.youtube.com/watch?v N4FXUxfIyj8&list UUDVVYzYJ-0Ye0kJAx8SQAEw

 

Woodturning Hollow Vessel - Segmented For Safety
By: As Wood Turns
February 28, 2014 · 5,624 views

http://www.AsWoodTurns.com Hollow vessels (Hollow Forms) are fascinating. How do you go about removing all that wood through that tiny hole in the top. Once you understand how, then you also begin to understand the risks involved especially for larger projects. They then require specialized tools such as bent scrapers. Even then a high skill level is required to avoid serious catches that could destroy the project. A catch could also do physical damage to the woodturner's elbow or shoulder. I also like segmented vessels, they have a different look and appeal. So why not combine segmented and h

 

Spindle Turning Safety for the Wood Lathe
By: WYOMINGWOODTURNER
December 03, 2013 · 108,424 views

Sam covers the importance of being safe when turning spindles on the lathe. He offers some tips on preventing injury and accidents while using the spindle roughing gouge as well as mounting wood between centers.

 

MORE SAFETY TIPS By Reed Gray aka robo hippy
By: robohippy
September 29, 2013 · 987 views

robo hippy shares some advice on essential safety tips

 

Lathe Belt and Pulleys
By: woodturningwithtim1
July 05, 2013 · 3,507 views

For the new turner it can be a challenge to understand how a lathe's pulleys and belt operate. Tim explains how the system works and in what situations you would use different configurations.

 

STAND OUT OF THE LINE OF FIRE by Reed Gray aka robo hippy
By: robohippy
June 25, 2013 · 8,794 views

 

Woodturning Q&A Safety and Jam Chucks
By: The Woodshop
January 29, 2013 · 15,135 views

In this video I talk about shop safety and how to make a jam chuck. Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

Very close call
By: Bob Hamilton
December 30, 2012 · 27,549 views

The first few minutes of this video shows what happened when the rotary adaptor bearing on my vacuum chucking system seized while I was working on the bottom of a bowl. The rest or the video shows how I replaced the bearing on the rotary adaptor. I was very fortunate to escape injury when the bowl exploded.

 

Woodturning for learners. Lathe safety Video4
By: Ian Robbo Robertson
November 15, 2012 · 5,279 views

This series of 4 videos are on safety when using the woodturning lathe and cover personal safety, Work environment safety, timber and finishes safety and lathe safety. I know it is a boring subject but probably one of the most important parts of enjoying your hobby. Remember: If you don't work safely you may not work at all.

 

Woodturning for learners. Workshop environment safety Video2.
By: Ian Robbo Robertson
November 15, 2012 · 2,620 views

This series of 4 videos are on safety when using the woodturning lathe and cover personal safety, Work environment safety, timber and finishes safety and lathe safety. I know it is a boring subject but probably one of the most important parts of enjoying your hobby. Remember: If you don't work safely you may not work at all.

 

Woodturning for learners. Personal safety Video1
By: Ian Robbo Robertson
November 15, 2012 · 4,876 views

This series of 4 videos are on safety when using the woodturning lathe and cover personal safety, Work environment safety, timber and finishes safety and lathe safety. I know it is a boring subject but probably one of the most important parts of enjoying your hobby. Remember: If you don't work safely you may not work at all.

 

Lyle on Always Wearing a Face Shield for Woodturning
By: Lyle Jamieson
September 10, 2012 · 3,044 views

Lyle Jamieson stresses the use of a face shield for SAFE woodturning.

 

Wood Lathe Safety: WYOMINGWOODTURNER
By: WYOMINGWOODTURNER
August 07, 2012 · 6,859 views

Sam Angelo shares a few tips for safely turning on a wood lathe. He also comments about wearing a glove while turning.

 

Jeepers Creepers..Safety Glasses!
By: woodturningwithtim1
August 02, 2012 · 4,182 views

Not only does getting old suck, but it seems to get fuzzier at the same time. Tim shows how he compensates for his lack of vision...and some tips on safety glasses.

 

Woodturning Disaster
By: As Wood Turns
August 02, 2012 · 76,110 views

http://www.aswoodturns.com Sometimes, we need a reminder of the risks involved in woodturning projects, particularly when turning a bowl harvested from random sources, sometimes called urban forestry. I harvest wood where ever I can, hoping for a big turning blank and fantastic grain and figure. This apricot wood blank was from the main trunk, one of the biggest pieces from the tree. I had grand hopes for it. But the bark inclusion that I was counting on to enhance the bowl actually extended thru almost the entire blank. Many years ago two limbs were growing almost parallel for many years. Mo

 

WORKSHOP SAFETY: WORKING SAFELY IN THE WOODWORKING SHOP: part 2
By: WYOMINGWOODTURNER
July 25, 2012 · 1,966 views

SAM CONTINUES :SAFETY IN THE WOODWORKING SHOP'. HE BEGINS BY LOOKING AT THE CHOPSAW AND CONTINUES WITH HIS IDEAS ON ACCIDENTS AND BEING SAFE IN THE SHOP.

 

WORKSHOP SAFETY: WORKING SAFELY IN THE WOODWORKING SHOP:PART 1
By: WYOMINGWOODTURNER
July 23, 2012 · 6,284 views

In the 1st part of a 2 part series on work shop safety, Sam covers several tools in his woodworking shop and how he has improved their function and safety.

 

Wood Turning - Parting Off and a Poem
By: Mike Waldt
June 30, 2012 · 3,276 views

A post regarding safety...and a poem as well....you've been warned :)

 

Wood Turning Accident
By: Mike Waldt
June 30, 2012 · 92,717 views

This clip shows how easy it is to have a Wood Turning accident if you let your guard down for one second. I was taking just 'one more cut', and didn't bother to put my full face shield back on, or my dust mask, as I was only going to make a couple of passes........... I was very very lucky. ALWAYS and I mean ALWAYS wear a full face shield, when working on a wood lathe.

 

Woodturning FUNdamentals - Safety Disclaimer
By: American Association of Woodturners
April 17, 2012 · 2,029 views

Woodturning FUNdamentals provides a source for basic woodturning skills and techniques. Learn more about the American Association of Woodturners at woodturner.org.

 

Woodturning FUNdamentals - Safety Disclaimer
By: American Association of Woodturners
March 12, 2012 · 3,968 views

Woodturning FUNdamentals provides a source for basic woodturning skills and techniques. Learn more about the American Association of Woodturners at woodturner.org.

 

MegaTurn Woodturning Lathe: Safety Demonstration
By: sbmmegaturn
February 11, 2012 · 5,249 views

This video demonstrates the safety features of the SBM MegaTurn Woodturning lathe. Learn more: http://megaturn.com

 

Wood lathe Machine Ultimate Safety Test
By: EdwardPoCheePing
February 03, 2012 · 3,180 views

Wood lathe

 

Why you don't use a Spindle Roughing Gouge on bowls.
By: Ian Robbo Robertson
October 11, 2011 · 239,273 views

DO NOT USE A SPINDLE ROUGHING GOUGE ON BOWLS. My name is Ian Robertson (Robbo) and I have been a production woodturner for 30 years. It is how I make my living turning everything from huge posts to tiny eave finials and everything between and my safety record is impeccable. Our business has never had a lost time incident and we still have all our fingers. This video was made because of a discussion about using a Spindle Roughing Gouge on a bowl on the Woodworking Forums in Australia. Most tool manufacturers and most experienced woodturners warn against using the Spindle Roughing Gouge for

 

Near Disaster in Wood Turning
By: archturn
December 14, 2010 · 5,705 views

This near disaster happened when I thought my lathe was set to rope twist when, in fact, it was set for high speed turning - about 1400 RPM's

 

Return to Turning Videos

Great Bargains
(ends October 24, 2019)


3M Professional Face Shield

On Sale for only $14.99

Save $3.00

List price: $17.99

Clear, 3/32" thick polycarbonate window provides an unobstructed, non-distorted view. Adjustable suspension headband fits head sizes from 6-1/2 to 8. Tips up and out of the way when not needed.

Click here for more information or to purchase

 


Rockler Carbide Pen Turning Tools

On Sale for only $109.99

Save $30.00

List Price: $139.99

This three piece set has comfortable rubber handles which provide excellent control and reduce fatigue—replaceable carbide tips require no sharpening.

Click here for more information or to purchase

 


Bar Tool Turning Kits

Get the 5 Piece Set for only $68.95

Save $15.00

Everything you need to turn out cocktails that friends will rave about—includes all five of their Bar Tool Turning Kits in one cost-saving package. Includes: bottle opener, double jigger, muddler bar, bar spoon, cocktail strainer and 5 threaded inserts.

Click here for more information or to purchase


Dust Right Lathe Dust Collection System

For only $44.99

Save $15.00

List Price: $59.99

This highly adjustable steel boom arm holds a semi-cylindrical dust scoop that closely cups your small turning projects, capturing nearly all dust!

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Woodturner's Tools
Rockler
Stainless Steel Bottle Stoppers

(Click any Ad to go to our Sponsor's Website)