Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Sharpening Videos (307)

Sort by

Or click here to: Search All Videos


Spindle Tools for Woodturning: cutting and sharpening by Sam Angelo ·
By: WYOMINGWOODTURNER
November 19, 2017 · 5,078 views

Sam first shows proper cutting techniques for: Spindle Roughing Gouge, Spindle Gouge, Detail Gouge, Vortex tool, and parting tools. And he ends by sharpening each. The turners listed below will offer further information on using spindle tools: Alan Lacer woodturning store: http://stores.alanswoodturningstore.com/dvds/ Eric Lofstrom website: https://tinyurl.com/yao4kvjr (found under teaching resources-skew) Mike Darlow website: http://www.mikedarlow.com/MJD%20pages/Index.html Stuart Batty: Here is only one of many videos by Stuart https://www.youtube.com/watch?v QMVGankeK0I

 

Highlights from woodturner Glenn Lucas's demonstration at Tormek ·
By: Tormek Sharpening Innovation
November 14, 2017 · 3,444 views

Highlights from woodturner Glenn Lucas’s demonstration at Tormek Sharpening Studio in Lindesberg, Sweden. At the event, Glenn Lucas demonstrated how he turns his classic handmade bowls, how he sharpens his woodturning tools with Tormek and he also gave his best advice when woodturning. Read this article on Tormek's website: https://www.tormek.com/international/en/about-tormek/news-archive/glenn-lucas-showed-master-woodturning-at-tormek

 

Conditioning and Sharpening of Woodturning Tools ·
By: Daniel Vilarino
November 04, 2017 · 1,650 views

Hola/Hi! Este video está en Inglés, si prefieres verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/TeiYHOSKEHs ***This video is in English*** En este video, realizo el acondicionamiento y afilado de varias herramientas para el torneado de madera, que fueron donadas por la Asociación Norteamericana de Torneros de Madera (AAW de su sigla en Inglés, American Association of Woodturners) para un par de escuelas en Mendoza, Argentina. ***In this video, I perform the conditioning and sharpening of several woodturning tools, donated by the American Association of Wood

 

Acondicionamiento y Afilado de Herramientas de Tornería de Madera ·
By: Daniel Vilarino
November 04, 2017 · 6,137 views

Hola/Hi! ***This video is in Spanish, if you prefer to watch it in English, please click on the following link:*** https://youtu.be/rBE046orcak Este video está en Español En este video, realizo el acondicionamiento y afilado de varias herramientas para el torneado de madera, que fueron donadas por la Asociación Norteamericana de Torneros de Madera (AAW de su sigla en Inglés, American Association of Woodturners) para un par de escuelas en Mendoza, Argentina. ***In this video, I perform the conditioning and sharpening of several woodturning tools, donated by the American Association of Woodtur

 

Switch from sharpening to honing with Tormek's Rotating Base RB-180 ·
By: Tormek Sharpening Innovation
November 03, 2017 · 2,274 views

The Rotating Base from Tormek helps you to easily rotate your machine 180 and lock it with complete stability. For more info about the Rotating Base, please see https://www.tormek.com/international/en/accessories/other-accessories/rb-180-rotating-base

 

#33 Creating a Detail Gouge Profile ·
By: Andrew Whale
October 05, 2017 · 573 views

Creating a Detail Gouge Profile I have several spindle gouges and I've been wondering how to create a detail gouge profile on a couple of these. I'm not sure if it is recommended to create a detail gouge profile on a spindle gouge, but I think that the main criteria is to make sure the gouge has a shallow flute (though I could be wrong!). It would be interesting to get feedback as to whether the method I used is considered acceptable. Ah - and don't forget to hone before using! I hope you find this video interesting. I always like to try new things out if possible. If you have any question

 

Bowl Gouge grinding ·
By: Tod Raines
September 20, 2017 · 273 views

Produced by Tod Raines of Woodturning Tool Store on September 20, 2017 This video shows how I create a swept back grind a new Carter and Son bowl gouge. Visit Woodturning Tool Store https://woodturningtoolstore.com Social media links Facebook: https://www.facebook.com/woodturningtoolstore Google : https://plus.google.com/ TodRaines Instagram: https://www.instagram.com/traines64

 

Sharpening Carbide Cutters - Quick Tip ·
By: Gord Rock
September 15, 2017 · 1,313 views

A quick, easy way to sharpen those carbide cutters that the manufacturers want you to believe cannot be sharpened. Thanks to Dick for turning on the light!!!

 

Maintaining the Oneway Wolverine Sharpening System w/ Glenn Lucas ·
By: Craft Supplies USA
August 16, 2017 · 3,129 views

Glenn Lucas shows you how to maintain the Oneway Wolverine Sharpening System. Oneway sharpening supplies: https://www.woodturnerscatalog.com/t/93/Sharpening-Systems?utm_source youtube&utm_medium description&utm_campaign videos Glenn's Signature Tools and DVD's: https://www.woodturnerscatalog.com/Sales/23/Glenn-Lucas-Signature-Tools?utm_source youtube&utm_medium description&utm_campaign videos 'As I traveled around the USA, I noticed that many woodturning clubs and woodturners own the Oneway Wolverine Jig. Many of them are not working correctly and either loosen very easily or won't lock up

 

Sharpening and Using the Microbevel with Jimmy Clewes ·
By: jimmy clewes
August 15, 2017 · 1,992 views

 

Sharpening Carbide Cutters | Woodturning How-to ·
By: Craft Supplies USA
August 14, 2017 · 19,075 views

Quickly and easily re-sharpen the carbide tipped cutters on your turning tools. Sharpening supplies: https://www.woodturnerscatalog.com/t/96/Honing?utm_source youtube&utm_medium description&utm_content carbide&utm_campaign videos Blog article: http://blog.woodturnerscatalog.com/2017/08/sharpening-carbide-cutters/ Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodturning tools and supplies in the industry. Sharpening supplies are available at https://www.woodturnerscatalog.com, 1-800-551

 

Maintaining the Oneway Wolverine sharpening system ·
By: Glenn Lucas
July 20, 2017 · 3,236 views

As I travel around the USA I noticed that many woodturning clubs and woodturners own the oneway Wolverine jig. Many of them are not working correctly and either loosen very easily or won't lock up at all. This video will show you how to resolve this problem.

 

Sharpening Glenn Lucas Signature Tools ·
By: Craft Supplies USA
July 11, 2017 · 1,877 views

Glenn Lucas shows you how to sharpen his signature turning tools with a variety of sharpeners and jigs. Signature tools and DVD's: https://www.woodturnerscatalog.com/Sales/23/Glenn-Lucas-Signature-Tools?utm_source youtube&utm_medium description&utm_campaign videos Visit Glenn Lucas: Glenn Lucas DVD's: http://www.glennlucaswoodturning.com/ Study Centre in Ireland: http://glennlucaswoodturning.com/ Sharpen your Hamlet Glenn Lucas Signature Tools with ease. Glenn Lucas shows you how from a variety of common grinders, sharpeners and jigs. Glenn Lucas Social Media: Facebook: https://www.facebook.com/glenn.lucas.9 Instagram: https://www.instagram.com/lucaswoodturning/ YouTube: https://www.youtube.com/user/GlennLucasWoodTurner Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodturning tools and supplies in the industry. Glenn Lucas Signature Tools, DVD's and USA Classes are available at https://www.woodturnerscatalog.com, 1-800-551-8876

 

How to Sharpen a Bowl Gouge ·
By: Dave's Woodshop
May 15, 2017 · 5,105 views

This video demonstrates how to sharpen a Bowl Gouge. The video shows the proper tools and techniques required to sharpen a Bowl Gouge.

 

How to Sharpen a Skew Chisel ·
By: Dave's Woodshop
May 15, 2017 · 992 views

This video demonstrates how to properly sharpen a skew chisel. The video shows the proper tools and techniques needed for sharpening both a standard and oval skew chisel.

 

Woodturning techniques ·
By: Woodturning with Kim
March 29, 2017 · 370 views

In this video I show my method of sharpening and turning a green wood bowl. Want to see more of me? Instagram: Woodturning with Kim My tools and equipment! Camera: Sony a5000 Lathe: Luna BWL 406 (record power 305) Turning tools: Crown 3/8 bowl gouge Editing software: Movavi video editor

 

Sharpening a roughing gouge ·
By: Tormek Sharpening Innovation
March 27, 2017 · 3,290 views

Woodturning artist Nick Agar shows how to sharpen a roughing gouge with the Tormek Wet Sharpening System. In this film, Nick uses the following products: Woodturning artist Nick Agar shows how to get your desired shape on your gouges. In this film, Nick uses the following products: TTS-100 Turning Tool Setter: https://www.tormek.com/international/en/accessories/other-accessories/tts-100-turning-tool-setter/ SVS-50 Multi Jig: https://www.tormek.com/international/en/grinding-jigs/svs-50-multi-jig/ PA-70 Honing Compound: https://www.tormek.com/international/en/accessories/other-accessories/pa-70-honing-compound/ LA-120 Profiled Leather Honing Wheels: https://www.tormek.com/international/en/accessories/other-accessories/la-120-profiled-leather-honing-wheel/ Tormek T-8: https://www.tormek.com/international/en/machine-models/tormek-t-8

 

Gouge sharpening - From factory grind to a superior sharpness ·
By: Tormek Sharpening Innovation
March 27, 2017 · 4,108 views

Woodturning artist Nick Agar shows how to get your desired shape on your gouges. In this film, Nick uses the following products: TTS-100 Turning Tool Setter: https://www.tormek.com/international/en/accessories/other-accessories/tts-100-turning-tool-setter/ BGM-100 Bench Grinder Mounting Set: https://www.tormek.com/international/en/accessories/other-accessories/bgm-100-bench-grinder-mounting-set/ OWC-1 Tormek Converter: https://www.tormek.com/international/en/accessories/other-accessories/owc-1-tormek-converter/ SVD-186 Gouge Jig: https://www.tormek.com/international/en/grinding-jigs/svd-186-gouge-jig-svd-185/ LA-120 Profiled Leather Honing Wheels: https://www.tormek.com/international/en/accessories/other-accessories/la-120-profiled-leather-honing-wheel/ Tormek T-8: https://www.tormek.com/international/en/machine-models/tormek-t-8

 

How long will it take to sharpen a gouge? 10 seconds ·
By: Tormek Sharpening Innovation
March 27, 2017 · 2,122 views

Woodturning artist Nick Agar shows us how to sharpen a gouge within a couple of seconds. In this video, Nick uses the following products: Tormek's Turning Tool Setter TTS-100: https://www.tormek.com/international/en/accessories/other-accessories/tts-100-turning-tool-setter/ Tormek's Gouge Jig SVD-186: https://www.tormek.com/international/en/grinding-jigs/svd-186-gouge-jig-svd-185/ Tormek T-8: https://www.tormek.com/international/en/machine-models/tormek-t-8

 

Sharpening, quick, easy, and accurate ·
By: Lyle Jamieson
March 23, 2017 · 3,277 views

This is a new quick review on how to fine tune your sharpening techniques. A simple bench grinder is the best way to sharpen turning tools. I have booked some live demonstrations around the country and Europe from my shop, with my tools, my cameras. If you are interested give me a call. 231-947-2348 lylejamieson.com Welcome to my channel. I have been turning all my life and want to share the techniques I discovered over the years. The first 40 videos on my channel were technique oriented showing different parts of the process. Lately, I have been doing project oriented videos. I still hope o

 

Diamond Sharpening Card Review ·
By: Jake Webb
March 23, 2017 · 531 views

A few thoughts on using Trend diamond sharpening cards with my woodturning tools. My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

To Burr Or Not To Burr ·
By: Ron Calverley
March 21, 2017 · 358 views

Is a burr on my scraper such a good idea? For me, I'm not so sure!

 

Sharpening Lathe Chisels ·
By: Turntastic Wood Designs
March 05, 2017 · 391 views

Resources for making sure you have sharp tools.

 

Sharpening the Negative Rake Scraper ·
By: Brendan Stemp
February 24, 2017 · 9,271 views

Using either a bench grinder and a diamond paddle I show haw I sharpen one of my favourite tools. Here is a link to the 'Using a Negative Rake Scraper' video: https://youtu.be/gHMfBmAZRKk

 

I Really Need To Sharpen My Tools... (quick version with music) ·
By: Jerry Paul
February 22, 2017 · 1,005 views

This is just a copy of my last video, sped up and with music added... I'm curious to see which gets more views/attention.

 

I Really Need To Sharpen My Tools... (long, boring, no music version) ·
By: Jerry Paul
February 22, 2017 · 697 views

ALL of my gouges are dull. AND my parting tool. AND my skew. I guess, after making this video, I should head out to the garage and sharpen them all up. I finally found a sharp skew and turned a spinning top. Its just one of those days. lol Shortly after I finish uploading this video, I'll be uploading a copy of it that has been sped up with music added. I'd like to see which one gets more views.

 

woodturning how to set up a oneway wolverine sharpening jig ·
By: Woodslee Summercraft
February 10, 2017 · 16,340 views

finally a sharpening system that works. I am so happy that I spent the cash and invested in this set up. Easy to use and very repeatable

 

Sharpening Turning Tools // WOODTURNING ·
By: Peter Matthew
February 02, 2017 · 5,333 views

Finally! I've had more requests to make a video on sharpening than any other subject ever. So, here goes ;) Skips! :) Bowl gouge 1:34 Spindle gouge 3:19 Roughing gouge 4:20 Parting tool 5:41 Skew 6:50 Scraper 8:31 TOOLS USED Grinder: http://woodturnerswonders.com/collections/rikon-grinders/products/rikon-grinder Wolverine Jig: https://www.amazon.com/Oneway-2291-Wolverine-Grinding-Jig/dp/B000CSQONC/ref pd_sim_469_1?_encoding UTF8&pd_rd_i B000CSQONC&pd_rd_r 56KBGZXA3JRK1241HN8J&pd_rd_w 67SEA&pd_rd_wg ucHPr&psc 1&refRID 56KBGZXA3JRK1241HN8J Varigrind

 

DIY - How to sharpen your barrel trimmer ·
By: Chapman Crafters
January 05, 2017 · 644 views

How to sharpen your barrel trimmer to keep it sharp! - - - - - - Please watch: 'DYI - Silicone Mold for Pen Blanks' https://www.youtube.com/watch?v _engdA0K-wQ - - - - - -

 

Lathe tool sharpening ·
By: Rich McNatt
December 18, 2016 · 783 views

I am doing some lathe tool sharpening this evening stop in if you have any questions or just want to see my process

 

Sharp is what sharp does ·
By: Theo the Woodturner
December 04, 2016 · 233 views

The sharper your tool, the finer the cut you can take, the more control you have of the result, the less time you spend sanding and your enjoyment goes to another level. Isn't that what it's all about?

 

Bowl Gouge sharpening with JoHannes Michelsen ·
By: Havewood Willturn
November 19, 2016 · 122 views

Had the great pleasure to meet up with the Hat Man himself. Here he shows how to grind sharpen bowl gouges.

 

Shaping and sharpening a fingernail grind spindle gouge. ·
By: Theo the Woodturner
September 29, 2016 · 1,844 views

As a follow up to my video on using the lady fingernail grind spindle gouge this video shows how I obtain that shape and sharpen it.

 

Sharpening station and reflexions on hollowing system ·
By: Marc 's Oneway of turning
September 19, 2016 · 618 views

New setup at the sharpening station and some reflexions about a system for hollowing. Constructive comments are very welcome. Marc

 

Quick and Easy Sharpening Woodturning Tools ·
By: Carter and Son Toolworks
July 28, 2016 · 2,591 views

With 40 years of sharpening experience at hand, David Carter guides you through a simple method for sharpening all your woodturning tools with minimal fixtures. Questions for David? Simply comment below. Explore Carter and Son Toolworks woodturning tools at: http://www.carterandsontoolworks.com. Find out more about the Toycen grinder and CBN wheels at: http://www.cuttermasters.com. In this video David uses the Oneway Wolverine system.

 

#66 - Sharpening My Woodturning Bowl Gouges and Scrapers ·
By: M. Saban Smith Woodturning
July 12, 2016 · 8,213 views

I've been talked into how I sharpen my woodturning bowl gouges and scraper tools on my bench grinder using a fingernail jig. There are many other videos out there on sharpening, and this is my method. Like the jig I use in the video? It's made in the UK and is available on eBay here: http://goo.gl/BPWiiO See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list! Hampshire Sheen: Fi

 

Sharp tools, When and why to sharpen your Lathe tools, ·
By: Rich McNatt
May 20, 2016 · 1,436 views

This video is for new turners to help in understanding how a tool should cut. A look at a cut from a sharp tool v. a butter knife

 

Flatland Woodturners Tool Sharpening Demo ·
By: Flatland Woodturners
May 15, 2016 · 283 views

Jerry Sievers demonstrates to the club how to sharpen your turning tools. This demonstration is from our April 2016 meeting. I apologize about the 'popping' sound in the video. A cheap tripod is the cause and makes a pop every time I go to adjust it.

 

Sharpening a Carbide Cutter ·
By: The Wood Whirler
April 17, 2016 · 7,045 views

Easy way of sharpening carbide cutters.

 

Wood Turning Sharpening Carbide Tool Tips ·
By: Turning Round
April 15, 2016 · 1,596 views

In this video I use a 1000 grit diamond hone to sharpen my carbide tips on my wood turning tools. With a diamond hone is is quick and simple to get a nice new edge on your turning tools. I didn't want this to sound like an add, I just use stuff that works I don't sell it or have any business relationship with these companies. https://www.woodturnerscatalog.com/p/96/5879/Trend-Double-Sided-Carvers-Stone https://www.woodturnerscatalog.com/p/96/5819/Trend-Diamond-Lapping-Fluid

 

Sharpening my carbide turning tool and my Skew, My goto lathe tools ·
By: Chad Schimmel
April 09, 2016 · 6,558 views

My main two tools are a carbide tip tool and a skew. Here is how I sharpen them. IF you like the video give it a thumbs up and don't forget to subscribe to the channel. If you want to make pens and need great supplies please visit www.turnerswarehouse.com by shopping here you help support the channel. Here are the items used in the video, If you are going to purchase them using this link helps support the channel, thank you Trend sharpening fluid, http://amzn.to/2tXAEZT Trend Stone, http://amzn.to/2tgmUuz Tormek T4, http://amzn.to/2tu4P7u Tormek skew attachment, http://amzn.to

 

Sharpening An Irish Grind Gouge ·
By: Roundabout Woodworks
March 03, 2016 · 7,582 views

Since I used an Irish grind gouge in my last video, I wanted to show how I sharpen the gouge. I use a Oneway Wolverine to do all my sharpening, so I suppose this video is demo of the Wolverine. http://oneway.ca/products-category/sharpening-grinding-jigs http://www.woodcraft.com/product/125676/oneway-wolverine-grinding-jig.aspx http://www.woodcraft.com/product/125677/varigrind-fingernailside-grinding-jig.aspx http://www.rockler.com/oneway-wolverine-grinding-jig http://www.rockler.com/oneway-vari-grind-jig

 

Sharpening the Parting Tool: woodturning with Sam Angelo ·
By: WYOMINGWOODTURNER
February 28, 2016 · 10,310 views

In this follow-up video on parting tools--- (The Ultimate guide..) Thttps://www.youtube.com/watch?v d-qugZiMQyM Sam shows his methods for sharpening various parting tool. Visit Chagrin Valley Soap and Salve.......Natural soap and more. http://www.chagrinvalleysoapandsalve.com

 

Sharpens Chisels and Shows Some Recent Projects ·
By: Erik Anderson
February 15, 2016 · 2,402 views

A few new turnings and I sharpen a set of old Sandvik Chisels that I got for 25 bucks at a garage sale and they are worth over 180.00

 

5 - Coolest Woodturning Montage EVER! Installing CBN Wheels Follow Up ·
By: Peter Matthew 2
February 10, 2016 · 326 views

This is the follow up for the previous video on installing CBN Wheels. Note: This is my vlog channel. I only upload videos where I talk and open stickers. If you want woodworking, go to my other channel: https://www.youtube.com/channel/UCMCV... ----------------------------------------­----------------------------------------­---------------------- If you would like a sticker, send me a stamped self addressed envelope or one of your own stickers with your address. Peter Matthew 6388 East Executive Drive Westland, MI 48185 Website: www.peterturnswood.com Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080

 

How to Sharpen a Detail/Spindle Gouge ·
By: Dave's Woodshop
February 06, 2016 · 26,402 views

This video explains and demonstrates the proper way to sharpen a spindle gouge. The spindle gouge has a compound shape, a combination of roll as well as sweep. Using the Wolverine Vari-Grind jig we are able to maintain this shape while sharpening.

 

How to Sharpen a Parting Tool ·
By: Dave's Woodshop
February 03, 2016 · 945 views

A demonstration on how to sharpen a lathe parting tool.

 

Talking, Turning & Tea - Episode 4 ·
By: Blind Wood Turner
January 30, 2016 · 726 views

In this episode of TT&T, Chris shows you his new wet stone sharpening system and an upcoming turning project.

 

How to sharpen a Roughing Gouge ·
By: Dave's Woodshop
January 25, 2016 · 516 views

This video demonstrates how to sharpen a roughing gouge with a grinder wheel.

 

My method of sharpening the Bowl Gouge. ·
By: Jim Ballard
January 15, 2016 · 56,163 views

How I sharpen/repeat the grind on my bowl gouge.

 

How to Sharpen a Woodturning Bowl Gouge ·
By: Carter and Son Toolworks
December 19, 2015 · 4,821 views

Follow this step-by-step tutorial and learn to sharpen your woodturning bowl gouge. Sharpening expert David Carter is sharpening a 5/8' bowl gouge using a slow-running grinder. Leave questions for David below! To learn more about the Carter and Son Toolworks, please visit: www.carterandsontoolworks.com. Thank you for watching, please like and subscribe for more woodturning videos. Happy turning!

 

Setting the Vari Grind Jig ·
By: Peter Matthew
December 14, 2015 · 4,388 views

A viewer requested that I make a video on how to set the angle on the Vari-grind jig from Oneway. The angle should always be set 23 degrees otherwise it will be very difficult to sharpen and use woodturning tools. --------------------------------------------------- If you would like a sticker, send me a stamped self addressed envelope or one of your own stickers with your address. Peter Matthew 6388 East Executive Drive Westland, MI 48185 Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080 Subscribe to my YouTube Channel! I post videos every Friday! Music: Clap Along by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

 

 

 

DMT Honing Tools Sharpening a Bedan Part 2 ·
By: Vinces WoodNWonders
December 10, 2015 · 482 views

Taking a look at Sharpening your woodturning tools with DMT products while positioned at the lathe.

 

DMT Turns 40 ·
By: Conover Workshops
December 07, 2015 · 125 views

This video is about the advantages DMT Diamond Plates to sharpen tools on the occasion of the Company's 40 Anniversary.

 

DMT Tools Honing a Bedan Woodturning Tool ·
By: Vinces WoodNWonders
December 07, 2015 · 3,231 views

Honing a Bedan using DMT Sharpening Tools!

 

Fabrication d'un manche d'outil + Affûtage - Manufacturing of a handle of tool + Sharpening ·
By: J'M Le Bois
December 01, 2015 · 13,077 views

Voici comment remplacer le manche d'un outil , j'espère que cette vidéo vous plaira. Si c'est le cas n'oubliez pas de laissez un pouce bleu , ça fait toujours plaisir :) et abonnez vous :) Lien pour les dons : https://www.paypal.com/fr/cgi-bin/webscr?cmd _flow&SESSION QP3UcMl9FGBLy_jwfeZpBQLaysT0aMCDtYh0qN11ck_aCU1kVFi7k0na6Dy&dispatch 5885d80a13c0db1f8e263663d3faee8dcce3e160f5b9538489e17951d2c62172

 

DMT Honing Kit for Woodturners ·
By: Vinces WoodNWonders
November 20, 2015 · 1,129 views

This is a brief video showing the new DMT Honing Woodturners Kit.

 

NUEVO sistema de afilamiento. ·
By: Segmentados Romero
November 19, 2015 · 1,967 views

NUEVO SISTEMA DE AFILAMIENTO PARA GUBIAS Y FORMONES. Utensilios: -Disco de lija de grano 180 -Disco de cuero para el asentamiento -Anillo de madera para tope (min. 5 cm) GRACIAS POR VERLO.

 

Sharpening Wood turning Tools ·
By: Levier Fine writing Instruments
October 24, 2015 · 533 views

Sharpen tools are a must for any turning project this video shows the use of a slow speed grinder and the jigs for a Maximum performance of your tools and projects

 

Freehand Sharpening Off the Bevel - a Monday Lunch Discussion 10-20-15 ·
By: wortheffort
October 21, 2015 · 2,387 views

This weeks lunch discussion covers selling techniques when working art/farmers markets, freehand sharpening of blades off the back bevel, new projects coming up, and this weeks project video. In market news we discuss our past three weeks results and how outside forces affect sales.

 

The Skew Chisel, Part 1: Types, Shapes, Sharpening ·
By: Daniel Vilarino
October 19, 2015 · 2,219 views

Hola/Hi! Este video está en Inglés, si prefieres ver la versión en Español del mismo, por favor haz un click en el siguiente enlace: https://youtu.be/Nu-YkhJqMbg *** This video is in English*** En este video, hago una presentación de las características principales del Formón Oblicuo, sus formas y tipos, diferentes ángulos a tener en cuenta y también cómo afilar esta herramienta. ***In this video, I make a presentation about the skew chisel characteristics, their shapes and types, different angles to take into account and also how to sharpen the tool.*** Este es el primero de una serie de d

 

#92 My Sharpener Upgrade Cooling the Motor ·
By: Stephen Ogle
September 14, 2015 · 21,460 views

After overheating my original motor I have designed an impeller and shroud to pull air through my sharpener to keep the motor cooler. If you would like a set of these plans please send 12.00 USD through Paypal to my email address: stvnogl@gmail.com Diamond disks are found on ebay at: http://www.ebay.com/itm/Grit-500-Diamond-coated-6-inch-Flat-Lap-wheel-Lapidary-grinding-polishing-wheel/121084916883?_trksid p2054897.c100204.m3164&_trkparms aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140407115239%26meid%3D13790dbc4506479fbd5f6af9b0b14bbf%26pid%3D100204%26rk%3D1%26rkt%3D20%26sd%3D130930389557

 

#91 My Shopmade Sharpening System ·
By: Stephen Ogle
September 04, 2015 · 21,450 views

Answering overwhelming requests for a build video and plans on my sharpening system. Here it is. This sharpener cost me around 50.00 USD to build and will sharpen almost every tool in my shop. Even Tablesaw and Bandsaw blades. I hope you enjoy this project. A PDF copy of the plans are now available for 12.00 USD using Paypal. Just send 12.00 to stvnogl@gmail.com through Paypal and as soon as I get the email I will reply back to you with the plans. Upgrading the motor for cooling is part 2: https://www.youtube.com/watch?v CUbcoOWJkiw The motor does not have a part number that I could fin

 

#90 Sharpening Part 1 Woodturning Tools ·
By: Stephen Ogle
August 30, 2015 · 137,763 views

After having viewer requests on the subject of Sharpening I decided to do a video of sharpening tools. Part 1 is for Woodturning tools and Part 2 will include other woodworking tools. Hope you enjoy this video and thanks for watching. Eddie Castelin's Blackhawk Plans http://eddiecastelin.com/sharing_information

 

Setting Up The Wolverine One Way Jig ·
By: Jerry Brown
August 07, 2015 · 7,230 views

I have had the grinder for a couple of months a few weeks back I got a Wolverine One Way Jig and I have finally gotten to setting this up. I set it up and sharpened my first tool in seconds. I Love this thing. Yes there are guys that can make the jig but I have too many projects already and this works perfectly. Let me know how the voice over works I have that newish feeling like when I started doing Videos and I am sure I can get more comfortable with a microphone too....

 

Sharpening Woodturning Tools - Doug Thompson ·
By: Thompson Lathe Tools
July 24, 2015 · 47,119 views

Doug Thompson of Thompson Lathe Tools demonstrates how he sharpens Bowl Gouges, Spindle Gouges, Detail Gouges and Scrapers. Along with showing how he sharpens, Doug explains what he believes woodturners should be using for grinders and jigs. He also offers tips for correcting improperly ground gouges and how to go to a friends house and sharpen your tools without offending your host and their grinding setup. For more information on Thompson Lathe Tools, visit http://www.thompsonlathetools.com

 

Woodturning - New Diamond Hone from James Barry Sharpening ·
By: Mike Waldt
June 22, 2015 · 6,103 views

James Barry/Trend have added a 180/300 grit Diamond Credit Card Hone to their range, and the 180 grit is superb for getting a really efficient burr on your scrapers. Part no. DWS/CC/CX UK STOCKIST http://www.beaverbushcraft.co.uk/ourshop/cat_846219-Razor-Shark-Diamond-Sharpening.html James Barry's Channel: https://www.youtube.com/channel/UC2aXGfjPDQkNQSD1T3n2h8Q Cyrus Fillmore's Channel: https://www.youtube.com/channel/UCfyJ8r_ArJb5oQI4TdmdTVw

 

SPSW 043 Sharpening for Woodturning ·
By: SPSW Video Library
June 20, 2015 · 138 views

Granite State Woodturners do a presentation on Sharpening using several methods

 

Sharp Fast Gouge Sharpening Video with Dave Hout ·
By: TMIProducts1
June 16, 2015 · 856 views

Sharp Fast Gouge Sharpening Guide 2015 by Dave Hout New Updated Video on how to sharpen gouges

 

Naked Turner How To Honing Wheel Update and Use ·
By: Erik Anderson
May 31, 2015 · 1,465 views

Follow up on the Honing Wheel Video

 

Large Bowl Turning, Part 2 the bowl on the lathe. Also sharpening and safety tips ·
By: Chad Schimmel
May 28, 2015 · 2,635 views

This is part 2 of our Large Bowl series. In this video Dave takes the blank down to the rough bowl for drying. Full of great info and safety and sharping tips. Dave Crawford from Artisan Woodturning LLC https://www.facebook.com/pages/Artisan-Woodturning-LLC/ IF you like the video give it a thumbs up and don't forget to subscribe to the channel. Featured Vendor, Fastcap. Everything you need. Www.fastcap.com Be sure and subscribe for new videos every Friday. For other questions on pen making please post a comment or email chadschimmel@gmail.com For business inquires please email chadschimmel@gmail.com

 

Wood turners sharping. Sorby sharpening system ·
By: Chad Schimmel
May 28, 2015 · 1,101 views

This is an excerpt of Dave Crawford using the Sorby Sharping System. Taken from my video Large Bowl turning Part 2. https://www.facebook.com/pages/Artisan-Woodturning-LLC/ IF you like the video give it a thumbs up and don't forget to subscribe to the channel. Featured Vendor, Fastcap. Everything you need. Www.fastcap.com If you are looking for custom pen blanks that I made please check out my ebay store at http://www.ebay.com/sch/schimmelsdust/m.html?item 201012656910&rt nc&_trksid p2047675.l2562 For finished pens made by Chad Schimmel visit www.impeccablepen.com Be sure and subscribe for new videos every Friday. For other questions on pen making please post a comment or email chadschimmel@gmail.com For business inquires please email chadschimmel@gmail.com

 

Ed Oliver demonstrates how to change belts on the Robert Sorby Pro Edge ·
By: Olivers Woodturning
May 05, 2015 · 345 views

Ed Oliver from Olivers Woodturning demonstrates how to change the belt on the Robert Sorby Pro Edge

 

Ed Oliver talks about the different belts for the Robert Sorby Pro Edge ·
By: Olivers Woodturning
May 05, 2015 · 1,643 views

Ed Oliver from Olivers Woodturning talks about the various types of belts available for the Robert Sorby Pro Edge Sharpening System.

 

Ed Oliver demonstrates the Robert Sorby Pro Edge ·
By: Olivers Woodturning
May 05, 2015 · 4,740 views

Ed Oliver from Olivers Woodturning demonstrates how easy it is to sharpen woodturning tools using the Robert Sorby Pro Edge system. Th Robert Sorby ProEdge sharpening system make sharpening your woodturning tools as simple as 1,2,3

 

Woodturning Tool Sharpening Station ·
By: Ed Krystosek
March 30, 2015 · 859 views

My New sharpening station. Visit the links below to learn how to sharpen and to build the sharpening jigs I made. Marius Hornberger - Plans for the Jig https://youtu.be/sfmIv0iXjis?list PL3TLzJ7anofhdOBZzHqGcpB163RrmsPt0 Brendan Stemp - https://youtu.be/shXPHpquMzk - https://youtu.be/pnRgCOl0_ss Mike Waldt - https://youtu.be/Xl_G1QUSXkM Carl Jacobson - https://youtu.be/OPhRk8g1iuA Robbie the Woodturner - https://youtu.be/b4SQV6U3CWI Lyle Jamison - https://youtu.be/0zUph9zEjck Cap'n Eddie - https://youtu.be/5i9RDnJHz9g

 

Sharpening Carbide Cutters ·
By: Daniel Vilarino
March 25, 2015 · 28,087 views

Hi my friends! ***Hay una versión en Español de este video*** In this video I talk a bit about replaceable carbide cutters for woodturning and how to sharpen them. Also I make a sharpening demonstration and a comparison between a new cutter and one freshly sharpened. As you will see there is not a major difference between both. Considering that the set of diamond sharpening stones costs 75 dollars, and each cutter insert go for about 15, 16 dollars each, with just 5 sharpenings you recover the investment in the stones and I am sure they can provide many more sharpenings. I hope you enjoyed this episode and if that was the case, please make comments, give it a 'like' and subscribe to my channel. If for any reason you did not like it, or there is anything that I could do better, please let me know. There is always room for improvement! The music was obtained from a royalty free sites that allows its use in videos. Thank you so much!! Cheers!! Daniel

 

FUNdamentals of Woodturning: Sharpen a Scraper ·
By: WYOMINGWOODTURNER
March 23, 2015 · 4,749 views

In this video Sam will sharpen a scraper and look at options for the bevel angel.

 

Glenn Lucas Mastering Woodturning: Sharpening Techniques (DVD preview) ·
By: Craft Supplies USA
March 20, 2015 · 3,350 views

Watch a woodturning preview of Glenn Lucas's DVD on woodturning sharpening techniques. Buy DVD: https://www.woodturnerscatalog.com/p/99/6379/Glenn-Lucas-Woodturning-Mastering-Woodturning-Sharpening-Techniques-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Glenn Lucas is well known as a top production turner; he has analyzed every process he uses in his production and has refined each aspect in an effort to maximize efficiency and minimize wasted time and effort. This DVD includes Glenn’s tech

 

5 grind hone ·
By: ONEWAY MANUFACTURING
March 17, 2015 · 1,223 views

Description

 

6 vari grind ·
By: ONEWAY MANUFACTURING
March 17, 2015 · 1,852 views

Description

 

2 vari grind ·
By: ONEWAY MANUFACTURING
March 17, 2015 · 6,186 views

Description

 

4 dressing jig ·
By: ONEWAY MANUFACTURING
March 17, 2015 · 1,182 views

Description

 

The Blind Wood Turner - Episode 21 - Sharpening My Turning Tools ·
By: Blind Wood Turner
February 11, 2015 · 1,267 views

In this installment, The Blind Wood Turner shows how he is able to put a keen edge on a selection of tools using a sharpening jig. Sorry for any blurriness !!

 

How to Sharpen Wood Turning Tools ·
By: Carter and Son Toolworks
January 02, 2015 · 123,046 views

With 40 years of sharpening experience at hand, David Carter guides you through sharpening all your woodturning tools. Questions or for David? Simply comments below. Find out more about Carter and Son Toolworks wood turning tools at: http://www.carterandsontoolworks.com. Find out more about the Toycen grinder and CBN wheels at: http://www.cuttermasters.com.

 

Sharpening the flat on a Scraper or Bench Chisel ·
By: WYOMINGWOODTURNER
December 20, 2014 · 3,407 views

Sharpening the flat part of a scraper is not easily done on a round grinding wheel. Sam shows a cheap, simple way to do it.

 

Sharpening Techniques DVD with Glenn Lucas Woodturner ·
By: Glenn Lucas
November 20, 2014 · 78,304 views

http://glennlucaswoodturning.com Video clip from the new Sharpening Techniques DVD by Glenn Lucas Woodturner, released 20th November 2014 3rd DVD in his series 'Mastering Woodturning'. In this DVD Glenn shows in simple steps, how to use woodturning tools on a range of sharpening systems common on the market - Tormek, Oneway Wolverine, Sorby Pro-Edge, Woodcut Tru-Grind. For turners considering investing in one, this DVD will show each system put though its paces. Each is fairly presented by Glenn who gets the very best results from all. If you own one of these jigs already, Glenn plainly s

 

Sharpening A Point Tool: Woodturning ·
By: WYOMINGWOODTURNER
November 11, 2014 · 6,161 views

Sam explains a simple process for sharpening a point tool. A tool usually associated with thread chasing, the point tool is very versatile.

 

#101 Sistema de afilado casero - homemade sharpening system ·
By: Miguel Sanchez
November 11, 2014 · 15,278 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez El soporte para las gubias: https://www.youtube.com/watch?v sfmIv0iXjis Los Planos:https://www.dropbox.com/s/fki47vwcusgdgq4/Sharpening%20jig%20plans%20for%20woodturning%20tools.pdf?dl 0 Mirad su canal, esta genial. Saludos http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Sharpening Woodturning Tools ·
By: Peter Matthew
October 31, 2014 · 623 views

 

Tormek visit woodturning artist Nick Agar ·
By: Tormek Sharpening Innovation
October 31, 2014 · 281,841 views

With large scale, multi-textured turned wood sculptures, Nick has earned a reputation for producing highly individual, beautifully crafted art combining woodturning with other artistic techniques. He is exhibiting widely and appearing at international conferences both as a demonstrator and a judge. His work has also featured on the BBC and ITV lifestyle television programmes. Join us on our visit to his workshop in Devon, UK. Read more about the Tormek Sharpening System at https://www.tormek.com

 

Tormek visit ice-sculptor Tjåsa at the Ice Hotel in Jukkasjärvi ·
By: Tormek Sharpening Innovation
October 22, 2014 · 7,795 views

Follow us to the Ice Hotel in Jukkasjärvi, northen Sweden! We meet ice sculptor Tjåsa, one of the many artists who create this amazing project. Every year a whole new hotel is built -- fully made of naturally frozen ice. Of course, we also talk sharpening and sharp tools! Read more about the Tormek Sharpening System at https://www.tormek.com

 

How to Sharpen a Woodturning Scraper ·
By: Craft Supplies USA
October 10, 2014 · 13,176 views

Learn the same basic scraper sharpening techniques as taught by our top professionals. Visit us: https://www.woodturnerscatalog.com?utm_source youtube&utm_medium description&utm_campaign videos At Craft Supplies USA, we believe that properly ground sharp tools are fundamental to successful and enjoyable woodturning. Getting consistent, repeatable results when you sharpen doesn’t need to be expensive or complicated... Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodturning t

 

How to Sharpen a Spindle Roughing Gouge ·
By: Craft Supplies USA
October 10, 2014 · 6,683 views

Learn the same basic spindle roughing gouge sharpening techniques as taught by our top professionals. Visit us: https://www.woodturnerscatalog.com?utm_source youtube&utm_medium description&utm_campaign videos At Craft Supplies USA, we believe that properly ground sharp tools are fundamental to successful and enjoyable woodturning. Getting consistent, repeatable results when you sharpen doesn’t need to be expensive or complicated... Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Craft Supplies USA (The Woodturners Catalog) carries the largest selection o

 

How to Sharpen a Spindle Gouge ·
By: Craft Supplies USA
October 10, 2014 · 6,860 views

Learn the same basic spindle gouge sharpening techniques as taught by our top professionals. Visit us: https://www.woodturnerscatalog.com?utm_source youtube&utm_medium description&utm_campaign videos At Craft Supplies USA, we believe that properly ground sharp tools are fundamental to successful and enjoyable woodturning. Getting consistent, repeatable results when you sharpen doesn’t need to be expensive or complicated... Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodtur

 

How to Sharpen a Skew Chisel ·
By: Craft Supplies USA
October 09, 2014 · 20,736 views

Learn the same basic skew chisel sharpening techniques as taught by our top professionals. Visit us: https://www.woodturnerscatalog.com?utm_source youtube&utm_medium description&utm_campaign videos At Craft Supplies USA, we believe that properly ground sharp tools are fundamental to successful and enjoyable woodturning. Getting consistent, repeatable results when you sharpen doesn’t need to be expensive or complicated... Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodturni

 

How to Sharpen a Parting Tool ·
By: Craft Supplies USA
October 09, 2014 · 20,746 views

Learn the same basic parting tool sharpening techniques as taught by our top professionals. Visit us: https://www.woodturnerscatalog.com?utm_source youtube&utm_medium description&utm_campaign videos At Craft Supplies USA, we believe that properly ground sharp tools are fundamental to successful and enjoyable woodturning. Getting consistent, repeatable results when you sharpen doesn’t need to be expensive or complicated... Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodturn

 

How to Sharpen a Bowl Gouge ·
By: Craft Supplies USA
October 09, 2014 · 16,103 views

Learn the same basic bowl gouge sharpening techniques as taught by our top professionals. Visit us: https://www.woodturnerscatalog.com?utm_source youtube&utm_medium description&utm_campaign videos At Craft Supplies USA, we believe that properly ground sharp tools are fundamental to successful and enjoyable woodturning. Getting consistent, repeatable results when you sharpen doesn’t need to be expensive or complicated... Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodturnin

 

How to Sharpen Woodturning Tools ·
By: Craft Supplies USA
October 09, 2014 · 183,276 views

Learn the same basic woodturning tool sharpening techniques as taught by our top professionals. Visit us: https://www.woodturnerscatalog.com?utm_source youtube&utm_medium description&utm_campaign videos At Craft Supplies USA, we believe that properly ground sharp tools are fundamental to successful and enjoyable woodturning. Getting consistent, repeatable results when you sharpen doesn’t need to be expensive or complicated... We'll teach you how to sharpen your basic bowl gouge, skew chisel, parting tool, spindle gouge, spindle roughing gouge and scraper. Please subscribe to our chann

 

Sharpening a Skew Chisel Freehand: woodturning ·
By: WYOMINGWOODTURNER
August 31, 2014 · 32,644 views

Sam continues the series on sharpening tools. He sharpens a skew chisel freehand: one tool with a straight cutting edge and one has a convex edge.

 

Sharpening a Bowl Gouge with a traditional Grind: woodturning with Sam ·
By: WYOMINGWOODTURNER
August 29, 2014 · 42,509 views

Sam gives a lesson on sharpening a bowl gouge with a 'straight-across' grind or often called a traditional grind. In this video Sam finally gets tough with shop dog Coco for bad behavior. It gets ugly...

 

Introduction film to the Tormek system ·
By: PeachtreeWoodworks
August 29, 2014 · 855 views

With the T-3 you get access to the Tormek high quality sharpening system at a favourable price and it is ideal for sharpening woodworking hand tools, knives and scissors. See moe @ http://www.ptreeusa.com/tormec_landing_page.htm

 

Sharpening a Bowl gouge with Swept-back Wings: Woodturning and Sharpening ·
By: WYOMINGWOODTURNER
August 28, 2014 · 17,604 views

Sam grinds and sharpens a bowl gouge with swept-back wings. He free-hand sharpens a gouge with a grind straight from the factory.

 

Sharp Fast gouge sharpening system discussion ·
By: TMIProducts1
August 18, 2014 · 252 views

Discussion about how to use the Sharp Fast gouge sharpening system by Dave Hout

 

D.I.Y Simple Sharpening System ·
By: 3earring3
July 15, 2014 · 310 views

http://earring3.pixnet.net/blog/post/149209606

 

Sharpening - Speed Gouge ·
By: Ron Brown
July 02, 2014 · 2,018 views

Sharpening instructions for Ron Brown's Best Speed Gouge, a specialty lathe tool used in making small thin spindles such as Spin Top stems, Christmas Ornament Icicled, delicate Finials, etc.

 

Wood Turning With Naked Turner Segmented Goblet and Sharpening Scraper and Bowl Gouge ·
By: Erik Anderson
June 08, 2014 · 212,419 views

Segmented goblet inspired by Mike Waldt with Sharpening of scraper and bowl gouge inspired by Cindy Drozda

 

Attaching the Grinding Wheel & Sharpening Jig ·
By: Teknatool NOVA
June 05, 2014 · 2,352 views

This video shows you how to attach the NOVA Grinding Wheel and Sharpening center to the NOVA Comet II Midi-Lathe.

 

sharpening jooltool ·
By: Adam Woodturner
June 04, 2014 · 165 views

- Captured Live on Ustream at http://www.ustream.tv/channel/woodturningwood

 

sharpening my turning gouges ·
By: Adam Woodturner
June 04, 2014 · 606 views

showing how I sharpen my gouges with my Rikon slow speed grinder and SB tools sharpening system, combined with the Vari Grind from Oneway - Captured Live on Ustream at http://www.ustream.tv/channel/woodturningwood

 

Woodturning: Sharpening a skew ·
By: Roundabout Woodworks
May 29, 2014 · 2,262 views

Short video of skew chisel sharpening process.

 

Vicmarc Sharpening & Grinding System ·
By: Brendan Stemp
May 26, 2014 · 10,141 views

A close look at the new sharpening system from Vicmarc. For more information: http://www.vicmarc.com/default.asp?contentID 596

 

Sharpening methods for Wood lathe tools ·
By: Jack Nelson
May 24, 2014 · 1,460 views

Covers using 8' conventional grinder with Wolverine sharpening system to sharpen gouges and parting tools. Shows using the Tormac sharpening system and a jig to sharpen skews and double edge chisels.

 

Tormek visit Dala horse making factory in Nusnäs, Sweden ·
By: Tormek Sharpening Innovation
May 20, 2014 · 29,343 views

Learn the story of the original Dala horse from Dalarna, Sweden and see how the woodcarvers keep their knives sharp. These guys sharpen 50-60 knives a day! Each horse is a true hand craft, carved and painted by hand since generations. Read more about the Tormek Sharpening System at https://www.tormek.com

 

Sharpening your wood turning tools ·
By: DentonTurners
May 06, 2014 · 8,876 views

John Solberg and Sam Slovak discuss various types of tools used in woodturning and the characteristics of each. They also discuss methods, tools, and jigs that may be used to sharpen you turning tools and demonstrate both the Oneway Wolverine jig and the Tormek sharpening system. This was recorded at the May 2014 club meeting of the Golden Triangle Woodturners in Denton, Texas. Find more about our club at http://www.goldentrianglewoodturners.org

 

Easy Parting Tool Cutter Change ·
By: EasyWoodTools
May 01, 2014 · 8,186 views

This video shows how to install and remove the Wedge Lock Insert in the new Easy Parting Tool.

 

Sharpening ·
By: WoodturningTools by JE
April 05, 2014 · 253 views

Gerald demonstrating how to sharpen the cutters used in the JE Hollowing tools with the provided Jig. Quick And Easy Sharpening. To view Tools go to www.woodturningtools.com.au

 

SHARPENING: Grinders, Wheels, Jigs, Etc. by Reed Gray aka RoboHippy ·
By: robohippy
March 24, 2014 · 11,885 views

 

Tool Sharpening Set-up on the Wood Lathe ·
By: WYOMINGWOODTURNER
March 04, 2014 · 27,106 views

Sam shows an inventive way to sharpen tools using a grinding wheel chucked up on a wood lathe. Credit is due John Berkeley of the UK for this idea: Screwples, DVD # 1

 

Tormek visit Per Fritzell ·
By: Tormek Sharpening Innovation
February 25, 2014 · 8,393 views

Join us as we go fishing with Per Fritzell at one of his favourite places outside Lindesberg, Sweden. Back home, his Tormek get the work done sharpening up the filleting knife before preparing dinner. His son Nils with friend Rasmus give us a good hand in the kitchen (thanks guys). To Swedes, Per is a well known and appreciated actor, comedian and musician, famous from 'Galenskaparna' -- But who knew he also makes wooden knives. He's sharp! Read more about the Tormek Sharpening System at https://www.tormek.com

 

Band Saw blade Sharpening ·
By: Mike Waldt
February 20, 2014 · 12,441 views

A quick tip on how I found that I could sharpen my 'dull' band saw blade with the Trend (James Barry) small diamond file - part # DWS/TF3M/F - and here's the link : http://www.trend-uk.com/en/UK/product/DWS_TF3M_F/3/282/tapered_file_mini_3_inch_fine_.html

 

How to Sharpen a Skew Chisel--with Sam Angelo ·
By: WYOMINGWOODTURNER
February 05, 2014 · 17,186 views

Sam shows his process for sharpening a skew chisel. He uses a Wolverine system.

 

Wood Turning Honing your Turning Tools ·
By: PeachtreeWoodworks
February 04, 2014 · 624 views

A video Featuring Mike Waldt. In this video Mike talks about and shows you how to hone your turning tools to not only save time, but to also save money using some of Trends sharpening tools and devices. http://www.ptreeusa.com/sharpening.htm#10430

 

Wood Turning - Honing your Turning Tools ·
By: Mike Waldt
February 01, 2014 · 11,985 views

I show the way I maintain a keen edge on my turning tools, with James Barry's Diamond Hones, available from Trend. Link to a couple of James's videos: http://www.youtube.com/watch?v u7_3gLozERk http://www.youtube.com/watch?v O0HUr4w5rlU Robbies sharpening video: http://www.youtube.com/watch?v b4SQV6U3CWI

 

HOW TO SHARPENING WOODTURNING TOOLS ·
By: Robbiethewoodturner
January 27, 2014 · 129,789 views

I have benign asked many times to put back up my old video on sharpeing tools. well i made a new one so here it is a video about how i sharpening my woodturning tools. I hope it will give woodturners some tips on how to sharpeing gouges. sorry i could not fit in everything in as the video would go on for two hours Here is a link to my new web blog site i hope to up date with more photo http://robbiethewoodturner.net This video was produced and made by Robbie power Copyright All Rights Reserved

 

Raptor Grinding Jig Guide (woodturning sharpening accessory) ·
By: Craft Supplies USA
January 06, 2014 · 36,921 views

Upgrade your sharpening system with the Raptor Grinding Jig Guide! Buy now: https://www.woodturnerscatalog.com/p/94/6008/Raptor-Grinding-Jig-Guide?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Laser cut from 1/8' steel and built to last a lifetime, the Raptor grinding jig guide features a symmetrical design that allows for easy mounting on any work surface and is available in 3 sizes. Instructions included. Made in USA Craft Supplies USA (The Woodturners Catalog) carries the largest selection o

 

Sharpening With Larry Karlin ·
By: robohippy
December 30, 2013 · 2,097 views

This video is about Sharpening With Larry Karlin

 

How to Sharpen a Carbide Wood Lathe Tool Bit ·
By: Ken Rizza
December 30, 2013 · 6,657 views

Here is a fast and easy way to sharpen your Easy Wood Tool Bits or other Carbide Wood Tool Bits in seconds!

 

Sharpening Woodturning Tools Freehand ·
By: Brendan Stemp
December 22, 2013 · 153,510 views

Using 5 simple tips I show how to master sharpening wood turning tools freehand, without the use of any jigs.

 

2013-06-13 Sharpening Turning Tools by Dan Douthart (1h30m19s) ·
By: Gwinnett Woodworkers
November 30, 2013 · 2,527 views

GWA Turning SIG 06-13-13 Dan Douthart discusses the various methods and equipment used to successfully grind, shape and sharpen turning tools for the lathe. Working between several types of grinders and jigs, Dan puts the edges on several turning tool profiles with finesse and useful instruction. Full Video (1:30:19) Filmed and uploaded in HD.

 

Sharpening On The Road - Portability Revisited ·
By: As Wood Turns
November 15, 2013 · 2,963 views

http://www.AsWoodTurns.com This is a followup to my previous video concerning sharpening tools while away from home base. With that video, I was not happy with that solution due to significant runout of my home built mandrel. I ask for suggestions and received a lot. This video covers the two main categories of suggestions and my current 'Plan C' solution. Actually, 'Plan C' is two different alternatives so I can pick and choose whichever will work best for the tool at hand. Plus, several suggestions centered on honing my tools. So as a bonus, I made a faceplate for honing also. Grinding Whee

 

Glenn Lucas' Tormek Tips ·
By: Tormek Sharpening Innovation
November 07, 2013 · 26,227 views

Thanks Glenn for sharing your tips on how you use the Tormek SVD-185 jig! Please note: This jig has now been repleaced with the SVD-186 Gouge Jig. For more information, please see https://www.tormek.com/international/en/grinding-jigs/svd-186-gouge-jig-svd-185/ Read more about the Tormek Sharpening System at https://www.tormek.com

 

How to Sharpen A Spindle Gouge ·
By: Michael Roper
November 07, 2013 · 2,341 views

A short video on how to sharpen a spindle gouge, one of the fundamental tools of woodturning. This basic video shows you the proper angles and technique to sharpen or grind a spindle gouge. Michael Roper is a third-generation carpenter with a passion for woodturning and helping others become better woodturners

 

How to Sharpen a Bowl Gouge - Woodturning Tutorial ·
By: Michael Roper
November 07, 2013 · 1,431 views

A short video on how to sharpen a bowl gouge, one of the fundamental tools of woodturning faceplates. This basic video shows you the proper angles, jigs, and technique to sharpen or grind a bowl gouge. Michael Roper is a third-generation carpenter with a passion for woodturning and helping others become better woodturners

 

How to Sharpen a Roughing Gouge - Woodturning Tutorial ·
By: Michael Roper
November 07, 2013 · 1,429 views

A short video about how to sharpen a roughing gouge, one of the fundamental tools of woodturning spindles. This basic video shows you the proper angles and technique for sharpening a roughing gouge. Michael Roper from RoperWoodturning.com is a third-generation carpenter with a passion for woodturning and helping others become better woodturners

 

Tormek Visit Woodturner Glenn Lucas ·
By: Tormek Sharpening Innovation
November 06, 2013 · 40,021 views

Join us to visit woodturner Glenn Lucas in Ireland! As an experienced and well-respected teacher and demonstrator, Glenn is a sought after name for international woodworking conventions and training programs. His classic bowls, turned by hand from Irish native wood, can be found in quality outlets all over the world. Read more about the Tormek Sharpening System at https://www.tormek.com

 

Tormek Visit Woodturner Kurt Johansson ·
By: Tormek Sharpening Innovation
November 06, 2013 · 11,292 views

As one of Sweden's most experienced and skilled professional woodturners, Kurt Johansson knows the importance of sharp tools! Join us to visit his workshop and check out how he can get those really fine shavings. If you visit Stockholm, you will find his bowls at the Skansen shop. Read more about the Tormek Sharpening System at https://www.tormek.com

 

Wood Turning sharpening jig. Home made! ·
By: Making shavings
November 05, 2013 · 8,128 views

via YouTube Capture

 

# 201 Let's Talk Sharp ·
By: Cap'n Eddie Castelin
October 29, 2013 · 25,372 views

A few notes about sharpening tools, in particular deep fluted bowl gouges. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

Wolverine Sharpening System Pt3 ·
By: Woodcraft of Spokane
October 20, 2013 · 4,981 views

This is the final segment (of 3) where Bob describes various aspects of the Oneway Wolverine Grinding Jig and its operation for sharpening wood lathe tools. The Wolverine is also known as a Sharpening Jig. It is used on : • gouges • chisels • scrapers • parting tools • skews • carving tools • Plane Irons and more. For more information go to Oneway.ca

 

Wolverine Sharpening System Pt2 ·
By: Woodcraft of Spokane
October 20, 2013 · 9,055 views

This is Part 2 (of 3). Bob describes various aspects of the Oneway Wolverine Grinding Jig and its operation for sharpening wood lathe tools. The Wolverine is also known as a Sharpening Jig. It is used on : • gouges • chisels • scrapers • parting tools • skews • carving tools • Plane Irons and more. For more information go to Oneway.ca

 

Sharpening On The Road - Portable Tool Sharpening Station ·
By: As Wood Turns
October 19, 2013 · 2,980 views

http://www.AsWoodTurns.com When I use my portable mini lathe 'On Location' I sharpen my lathe tools before I leave. The problem is that all these tools get dull as I use them. My grinder is nice but not portable. So what can I do? Keep using dull tools? Use my diamond hone more? Try some way to use a flat wetstone. While at a workshop, I brainstormed this problem with Kirk DeHeer. Plan A was to mount a 6 inch grinding wheel (80 grit) on a 5/8' bolt that is mounted to a four jaw chuck. This worked except that there was a lot of runout. Plan B was to mount the grinding wheel with the bolt to a wooden faceplate. A hole was bored to the size of the bolt. The bolt then is epoxied into the hole. There is still a little runout but usable at slow speed. So I'm searching for a Plan C to eliminate the run out. What is your idea? Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

Rikon slow speed 8" grinder 80-805 ·
By: Adam Woodturner
October 02, 2013 · 5,698 views

Testing new grinder from rikon

 

Tormek T-7 Limited Graphite Anniversary Edition ·
By: Tormek Sharpening Innovation
September 04, 2013 · 26,222 views

Please note that this model isn't manufactured anymore. Tormek celebrates the 40th anniversary of the very first Tormek machine! The Tormek T-7 anniversary edition is specially coated in a graphite grey metallic. In addition to all the standard T-7 accessories that are included with the machine, you also get the appreciated Rotating Base RB-180 free of charge (and an exclusive Tormek cap!). Made in a strictly limited edition and will sell as long as stock last. Available from September 2013. More information: www.tormek.com Since 1973, Tormek has set a new standard for the sharpening of edge tools through its unique design and a number of innovative jigs and attachments. More informationa: https://www.tormek.com/international/en/about-tormek/news-archive/tormek-t-7-anniversary-edition

 

FUNdamentals sharpening ·
By: Walter Wager
August 27, 2013 · 1,780 views

This is the first of what I hope will be about 5 videos on woodturning fundamentals. Comments and constructive criticism are welcome.

 

HOMEMADE WOODTURNING TOOLS:PART3, SHARPENING CARBIDE SCRAPERS, DRILL SHANK DETAIL TOOLS ·
By: sjm2inok
August 21, 2013 · 18,016 views

In this video I'll show you how you CAN resharpen carbide shear scrapers...you can resharpen carbide shear cutters as well by using the diamond disk on the bevel only. I will also show how you can make two-in-one detail scrapers/cutters using 1/8', 3/16' and 1/4' extended drill bit shanks and these tools will fit in the homemade tool handle adapters and handles shown previously. In the next video, uploaded soon, I'll show how I grind the drill shank bits to use as scrapers and I will demo them on a piece of hardwood. I hope my ideas will inspire others to stop spending a fortune on commercial tools and enjoy the benefits of making tools tailored to your specific needs.

 

Sharpening Woodturning Lathe Chisels - ACCURATE SHARPENING BED ·
By: WoodChipsCC
August 09, 2013 · 847 views

Unable to make the following captions appear on the video; So far I've learned that: a- slow speed grinding works best. b-Heat is bad. c-Free hand grinding can be a waste. d- 60 spent is better than 400. e-Fixed nests are best. f- Fine honing should follow grinding. g-Stropping is significant. Sharp turning chisels are important for both safety and project results. Put some time into your sharpening setup.

 

Trend Diamond Sharpening ·
By: Craft Supplies USA
August 08, 2013 · 3,971 views

Having sharp tools has never been easier. Trend offers a full line of Diamond Sharpening Products. Buy now: https://www.woodturnerscatalog.com/Sales/22/Trend?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Benefits of using Trend Diamond Products: • Fast: diamond works 98% faster than traditional honing stones • Saves time: refresh the edge on blades in place • Saves money: light honing of tools extends the life of tools and cutters by eliminating the need for frequent grinding • Convenient: many T

 

Trend Diamond Credit Card and Carvers Stone ·
By: Craft Supplies USA
August 08, 2013 · 4,276 views

These Trend Credit Card Stones fit conveniently in your pocket and make touch-up's a breeze. Buy now: https://www.woodturnerscatalog.com/p/96/5815/Trend-Double-Sided-Diamond-Credit-Card-Stone?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA • Double-sided File for both fine (600 grit) and coarse (340 grit) sharpening • Ideal for fast sharpening of turning tools, router bits, cutters, chisels, carving tools and more • Retractable design ideal for carrying in your pocket • Manufacturer 5 year warranty

 

Trend Diamond Machinist File ·
By: Craft Supplies USA
August 08, 2013 · 2,247 views

This file features a double-sided flat profile that's ideal for sharpening a wide range of woodturning tools. Buy now: https://www.woodturnerscatalog.com/p/96/5818/Trend-Diamond-Machinist-File?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA • Ideal for sharpening gouge interior and exterior bevels, skews, carving tools, router bits, saw blades, chisels, knives and more. • Solid handle • File length: 2-3/8' • File width: 17/8' • Overall length: 7' Benefits of using Trend Diamond Products: • Diamond

 

Trend Diamond Tapered Files ·
By: Craft Supplies USA
August 08, 2013 · 2,046 views

These tapered files feature a half round/half flat profile that's ideal for sharpening a wide range of woodturning tools. Buy now: https://www.woodturnerscatalog.com/p/96/5817/Trend-Diamond-File-Tapered?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA • Ideal for sharpening gouge interior and exterior bevels, skews, carving tools, router bits, saw blades, chisels, knives and more. • Precision quality taper file • 3' File features fine 400 grit (nom. 40 micron) • 6' File features fine 600 grit (nom.

 

Trend Diamond Bench Whetstones ·
By: Craft Supplies USA
August 08, 2013 · 9,361 views

Create a razor sharp edge on your woodturning tools in seconds with the Trend Diamond Bench Whetstones. Buy now: https://www.woodturnerscatalog.com/p/96/5814/Trend-6%22-Diamond-Bench-Whetstone?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Ideal for honing the cutting edge after shaping on a grinder, the double-sided Trend Diamond Whetstone can go with you anywhere and makes fine sharpening quick and easy. 8' Whetstone • Ideal for sharpening scrapers, skews, parting tools, carbide cutters, chise

 

Trend Diamond Lapping Fluid ·
By: Craft Supplies USA
August 08, 2013 · 3,334 views

Trend Lapping Fluid lubricates the surface of your diamond hone, improving performance and preventing clogging and rust. Buy now: https://www.woodturnerscatalog.com/p/96/5819/Trend-Diamond-Lapping-Fluid?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Designed solely for use with diamond abrasives and used for more than 30 years in the engineering industry. • Suitable for use with all quality diamond abrasive products • Use Trend lapping fluid instead of water to reduce threat of rusting by 95% • R

 

Trend Diamond Cleaning Block ·
By: Craft Supplies USA
August 08, 2013 · 1,552 views

Designed for cleaning build-up from your Trend diamond hones. Buy now: https://www.woodturnerscatalog.com/p/96/5820/Trend-Diamond-Stone-Cleaning-Block?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA The Trend Diamond Stone Cleaning Block gently removes excess waste from the surface of your diamond stone without damaging the diamond. Benefits of using Trend Diamond Products: • Diamond works 98% faster than traditional honing stones • Saves time: refresh the edge on blades in place • Less frequent

 

Sharpen Your Lathe Tools Like An Expert ·
By: Ron Brown
August 03, 2013 · 7,953 views

Brief excerpt from Ron Brown's new How-To vieo on sharpening lathe tools.

 

Sharpening Chisels with the Trend Credit Card ·
By: PeachtreeWoodworks
July 01, 2013 · 430 views

A video detailing how to sharpen chisels using Trends Credit Card Hone.Get the Trend Credit Card Hone here... http://www.ptreeusa.com/sharpening.htm#10420

 

Sharpen Turning Tools using Trends 6" Tapered File ·
By: PeachtreeWoodworks
July 01, 2013 · 401 views

Sharpen turning tools using Trends 6' Tapered File Get the Diamond Tapered File here... http://www.ptreeusa.com/sharpening.htm#10419

 

Sharpen Turning Tools using the Trend Credit Card Hone ·
By: PeachtreeWoodworks
July 01, 2013 · 635 views

Learn How to sharpen turning tools with the Trend Credit Card Hone. Get the Trend Credit Card Hone here... http://www.ptreeusa.com/sharpening.htm#10420

 

Trend Lapping Fluid ·
By: PeachtreeWoodworks
July 01, 2013 · 296 views

Get Trend Sharpening tools and Accessories Here... http://www.ptreeusa.com/sharpening.htm#10419

 

Trend Honing Guide ·
By: PeachtreeWoodworks
July 01, 2013 · 2,850 views

Get Trend Sharpening tools and Accessories Here... http://www.ptreeusa.com/sharpening.htm#10419

 

Sharpening Forstner Bits using Trend Sharpening Tools ·
By: PeachtreeWoodworks
July 01, 2013 · 959 views

A video detailing How to sharpen Forstner Bits using Trend Tools. Get Trend Sharpening tools and Accessories Here... http://www.ptreeusa.com/sharpening.htm#10419

 

Sharpening Carbide Tips for Turning Tools using Trend Sharpening Tools ·
By: PeachtreeWoodworks
July 01, 2013 · 2,257 views

Learn how to sharpen those 'disposable' carbide cutters on your expensive turning tools using Trend Sharpening Tools & Accessories. Get Trend Sharpening tools and Accessories Here... http://www.ptreeusa.com/sharpening.htm#10419

 

How to use the Trend Cleaning Block ·
By: PeachtreeWoodworks
July 01, 2013 · 456 views

It kinda looks and reminds me of the pink eraser I used in grade school. Turns out, it works pretty much the same way. Get Trend Sharpening Tools & Accessories here.... http://www.ptreeusa.com/sharpening.htm#10424

 

Tormek Turning Tool Setter TTS100 ·
By: PeachtreeWoodworks
May 16, 2013 · 869 views

For instant replication of the geometries on turning gouges and skews when using the SVD-185 Gouge Jig and the SVS-50 Multi Jig. Get More info here... http://www.ptreeusa.com/tormek_sharpening_accessories.htm#21084

 

Tormek Gouge Jig SVD185 ·
By: PeachtreeWoodworks
May 16, 2013 · 1,529 views

For an exact replication of the shape on fingernail shaped turning gouges. Can be set for various lengths of the side bevel.Get more info here! http://www.ptreeusa.com/tormek_sharpening_jigs.htm#21075

 

Tormek Company Presentation ·
By: Tormek Sharpening Innovation
April 26, 2013 · 23,155 views

Well grounded in the Swedish tradition for innovation, functionality and quality, Tormek has developed a unique sharpening system that has come to set the standard in modern edge tool sharpening.

 

Sharpening Woodturning Tools ·
By: Robert Sorby
April 26, 2013 · 58,522 views

How to sharpen woodturning tools with the Robert Sorby ProEdge sharpening system is the most reliable and efficient method to sharpen all your tools. In this film Robert Sorby demonstrator Clive Brooks shows us how easy it is to get a factory finish every time.

 

Wood Turning - Tool Sharpening ·
By: Mike Waldt
March 31, 2013 · 59,013 views

My method of sharpening my Woodturning tools.

 

Sharpening a Scraper - Woodturning How-to Tutorial ·
By: The Woodturning Store
March 31, 2013 · 20,696 views

In HD. In this video I discuss how to sharpen woodturning scrapers on a bench grinder with CBN Wheels and a Oneway Wolverine system. Thanks for watching and please subscribe to my channel to keep up with my latest videos.

 

Sharpening a Roughing Gouge - Woodturning Tools - How-to Video ·
By: The Woodturning Store
March 31, 2013 · 50,923 views

This HD video Talks about the Woodturning Spindle Roughing gouge and how to sharpen them. This is part of my woodturning sharpening series of videos. Please checkout my Playlists for more videos like this. Thanks!

 

Sharpening a Swept Back Grind or Irish Grind on a Bowl Gouge - How To ·
By: The Woodturning Store
March 30, 2013 · 168,359 views

This HD video shows you how to grind and sharpen a Swept Back, Irish or Ellsworth grind on a woodturning bowl gouge. My setup uses the Oneway Wolverine Sharpening system with Don Geiger's vertical solution. It also uses CBN grinding wheels. This shape is one of the most popular grinds for a bowl gouge popularized by Master turner David Ellsworth. Every turner should own David Ellsworth's videos and take a class from him. Thanks for watching!!

 

Freshly sharpened square head scraper ·
By: HoscraWoodturner
March 24, 2013 · 177 views

Here I am testing my new square head scraper on a segmented project. It is going to be a tray made of solid Beech and freagmented Birch. (More about this here: http://hoscra.blogspot.no/2013/03/036-segmented-tray-part-1-planning-and.html) I am really happy with the finsish it is leavin behind. Not much sanding will be neaded :) Follow me at Blogspot: http://hoscra.blogspot.no/ Facebook: https://www.facebook.com/HoscraWoodturner

 

Sharpening-Spindle Gouge ·
By: woodturningwithtim1
March 23, 2013 · 14,713 views

Spindle gouges are very versatile tools that benefit from different grind shapes. This video shows how to use a sharpening jig system to create a 'standard' grind and a 'fingernail' grind.

 

Tormek Small Knife Holder SVM-00 ·
By: Tormek Sharpening Innovation
March 19, 2013 · 38,704 views

The SVM-00 Small Knife Holder works in conjunction with the Tormek Knife Jig SVM-45 and opens up the ability to work with complete control on a much wider range of small knives. Learn more on our website: SVM-00 Small Knife Holder: https://www.tormek.com/international/en/grinding-jigs/svm-00-small-knife-holder/ SVM-45 Knife Jig: https://www.tormek.com/international/en/grinding-jigs/svm-45-knife-jig

 

Sharpening a Bowl Gouge - Part 2 - A Detailed Look - Woodturning Tips ·
By: The Woodturning Store
March 18, 2013 · 9,555 views

This HD video shows give a detailed look at how I sharpen my woodturning bowl gouges on the Oneway Wolverine system with the Geiger Vertical Solution. Please take at look at my other videos and subscribe to my channel for more How-to and instructional woodturning videos. Thanks for watching! Sponsored by www.thewoodturningstore.com

 

Tormek Truing Tool TT-50 ·
By: Tormek Sharpening Innovation
March 14, 2013 · 28,344 views

Trues the grindstone exactly round and flat. Guided by the Universal Support, which also guides the jigs. Screw feed with dual knobs for smooth feed across the stone. The cutting depth can be set within 0,25 mm (0,01'). Learn more on our website: TT-50 Truing Tool: https://www.tormek.com/international/en/accessories/other-accessories/tt-50-truing-tool

 

Sharpening a Bowl Gouge - Part1 - Woodturning Tutorial ·
By: The Woodturning Store
March 12, 2013 · 12,509 views

In HD - This is an introductory video on how to sharpen a woodturning bowl gouge with a swept back grind using a Oneway Wolverine Sharpening system. Thanks for watching!

 

Tormek Turning Tool Setter TTS-100 ·
By: Tormek Sharpening Innovation
March 12, 2013 · 21,496 views

For instant replication of the geometries on turning gouges and skews when using the SVD-185 Gouge Jig and the SVS-50 Multi Jig. With built in edge geometries. Works on any stone diameter. Learn more on our website: Turning Tool Setter TTS-100: https://www.tormek.com/international/en/accessories/other-accessories/tts-100-turning-tool-setter

 

Sharpening-Roughing Gouge ·
By: woodturningwithtim1
March 10, 2013 · 12,714 views

Most turners are weekend warriors who find it challenging enough to keep up their turning skills. So how can we demand them to achieve the incredible accuracy and touch freehand sharpening demands? Jig sharpening systems allow any turner to make incredibly sharp and accurate cutting edges every time.

 

Sharpening-Parting Tool ·
By: woodturningwithtim1
March 02, 2013 · 15,426 views

Though a parting tool is one of the easiest tools to sharpen, just the smallest mistake will ruin the edge and waste your precious steel. A sharpening jig system provides you with a steady platform to tough up your tool.

 

Sharpening-Scrapers ·
By: woodturningwithtim1
February 23, 2013 · 7,865 views

A correctly sharpened bowl scraper can clean up the roughest of surfaces. This clip shows how to create the perfect burr for creating silky shavings.

 

Sharpening-Bowl Gouge ·
By: woodturningwithtim1
February 16, 2013 · 28,418 views

Bowl gouges are one of the most difficult tools to sharpen because of their unique shape. This video shows how to use a sharpening system to easily create those complicated grinds.

 

Wood Turning Q&A Sharpening Turning Tools ·
By: Carl Jacobson
February 05, 2013 · 34,705 views

Learn the basics woodturning tool sharpening techniques. In this video I show you how to sharpen your woodturning tools. The bowl gouge, spindle gouge, scraper, and the parting tool. I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robust dealer if you ha

 

Raptor CBN Sharpening Wheel (cubic boron nitride) ·
By: Craft Supplies USA
January 30, 2013 · 26,652 views

The Raptor CBN Sharpening Wheel renders traditional aluminum oxide grinding wheels obsolete. Buy now: https://www.woodturnerscatalog.com/p/97/5784/Raptor-8'-CBN-Fine-Sharpening-Wheel-with-Arbor-Bushing?utm_source youtube&utm_medium description&utm_campaign videos Please Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Machined from solid steel and bonded with Cubic Boron Nitride, the Raptor CBN Sharpening Wheel cuts fast, stays cool and never requires dressing or shaping unlike traditional grinding wheels. With the Raptor CBN wheel, you get a superbly sharp edge

 

D-WayTools Bowl Gouge Sharpening ·
By: Larry Hauch
January 01, 2013 · 12,766 views

Dave demonstrates his technique for sharpening D-WayTools bowl gouges. Wolverine setup: Stick out: 1 7/8' Pivot point to wheel - 7 1/4' Wing somewhere between the first & second notches

 

How to sharpen a damaged chisel on Tormek ·
By: Tormek Sharpening Innovation
December 21, 2012 · 154,279 views

Here is how easy it is to sharpen a damaged chisel. Demo by Jeff Farris for Charles Brook from The Highland Woodworker, Woodworking in America conference WIA 2012, Cincinnati. Now that's one sharp tool! Learn more about how to sharpen your chisels with Tormek: https://www.tormek.com/international/en/grinding-jigs/se-77-square-edge-jig

 

Sharpening D-WayTools Spindle & Roughing Gouges, Skews, Scrapers, Beading & Parting Tools ·
By: Larry Hauch
December 14, 2012 · 13,506 views

Dave demonstrates his method for sharpening D-WayTools Spindle Gouges using the Oneway* Wolverine and then uses a Robo Rest* platform to sharpen skew chisels, scrapers, Beading & Parting Tools. He also demonstrates the how to use the D-WayTools sharpening widget for hollowing tool scraper bits.

 

Sharpening D-WayTools Bowl Gouges ·
By: Larry Hauch
December 14, 2012 · 6,198 views

Dave shows how he shapes and sharpens D-WayTools Bowl Gouges using the Oneway* Wolverine system.

 

Platform Sharpening with The Robo Rest by Reed Gray aka robo hippy ·
By: robohippy
November 23, 2012 · 13,460 views

 

NOVA Sharpening Centre Instruction Video ·
By: Teknatool NOVA
November 20, 2012 · 15,686 views

The Nova Sharpening Centre attachment will transform your standard bench grinder into a precision grinding machine, but without the cost. The NOVA Sharpening Centre combines the slideway grinding jig and the powerful finger grind jig into one versatile sharpening tool. It utilizes a sturdy platform and a unique sliding base to achieve the ultimate in sharpening. This system turns your standard bench grinder into a precision sharpening machine. The slideway is also used to precision dress the grinding wheel essential for perfect grinding results. Find out more info here: http://teknatool.com/products/Other/Sharpening_Centre/Sharpening_centre.htm

 

#148 Forstner Bit Touch-up ·
By: Cap'n Eddie Castelin
November 18, 2012 · 82,421 views

Forstner Bit Touch-up

 

Tormek Rotating Base RB-180 ·
By: Tormek Sharpening Innovation
November 06, 2012 · 12,322 views

Enables you to easily rotate the machine 180 and lock it with complete stability. It makes it easy to alternate between sharpening and honing or sharpening towards or away from the edge. The RB-180 fits Tormek T-8, Tormek T-7, Tormek T-4, T-3, the 2000 and 1200 Series, plus the SA-250 and N-1500. Learn more about the Rotating Base on our website: https://www.tormek.com/international/en/accessories/other-accessories/rb-180-rotating-base

 

Tormek Profiled Leather Honing Wheel LA-120 ·
By: Tormek Sharpening Innovation
November 06, 2012 · 23,386 views

For the inside honing and polishing of turning gouges, carving gouges and V-tools. With ex­change­able profiles. Mounts outside the standard honing wheel. Learn more on our website: https://www.tormek.com/international/en/accessories/other-accessories/la-120-profiled-leather-honing-wheel

 

Tormek Japanese Waterstone SJ-250 ·
By: Tormek Sharpening Innovation
November 06, 2012 · 53,315 views

The Tormek Japanese Waterstone is 4000 grit and delivers a mirror finish with hardly any visible marks. Learn more on our website: https://www.tormek.com/international/en/accessories/grindstones/sj-250-tormek-japanese-waterstone

 

Tormek Blackstone Silicon SB-250 ·
By: Tormek Sharpening Innovation
November 06, 2012 · 25,615 views

Tormek Blackstone Silicon has been developed for shaping and sharpening HSS and other exotic alloyed steels. Learn more on our website: https://www.tormek.com/international/en/accessories/grindstones/sb-250-tormek-blackstone-silicon

 

Tormek AngleMaster WM-200 ·
By: Tormek Sharpening Innovation
November 06, 2012 · 54,732 views

Sets and measures the edge angle. Adjustable to any stone diameter from Ø 250 mm or 10' down to Ø 150 mm or 6'. Measures from 10 to 75 . Magnets keeps it in place. Learn more on our website: https://www.tormek.com/international/en/accessories/other-accessories/wm-200-anglemaster

 

Tormek Stone Grader SP-650 ·
By: Tormek Sharpening Innovation
November 06, 2012 · 20,267 views

For changing the function of the grindstone. The fine side grades the stone for a 1000 grit finish. The coarse side of the grader reverses the stone to normal fast grinding. Activates a glazed stone. Learn more on our website: https://www.tormek.com/international/en/accessories/other-accessories/sp-650-stone-grader

 

Tormek Square Edge Jig SE-76 ·
By: Tormek Sharpening Innovation
November 06, 2012 · 36,881 views

UPDATE: As from 2016, this jig has been replaced with the SE-77 Square Edge Jig. Learn more here: https://www.tormek.com/international/en/grinding-jigs/se-77-square-edge-jig/ Patented design. For plane irons and wood chisels. Aligns a wood chisel automatically parallel to the Universal Support. Safety stops prevent the tool from slipping off the stone and hurt your knuckles. Max tool width 76 mm (3').

 

Tormek Moulding Knife Attachment SVP-80 ·
By: Tormek Sharpening Innovation
November 06, 2012 · 33,506 views

For all shapes and makes of moulding knives with 24, 30 or 38 mm distance between guide holes. Sharpens the face of the blade and therefore any shapes can be done. Max width of blades 100 mm (4'). Read more on our website: https://www.tormek.com/international/en/grinding-jigs/svp-80-moulding-knife-attachment

 

Tormek Planer Blade Attachment SVH-320 ·
By: Tormek Sharpening Innovation
November 06, 2012 · 48,464 views

For blades of any length. Blades longer than 270 mm (10 ') are relocated in the blade holder and ground in two steps. The grinding depth can be set within 0,1 mm (0,004'). Min width of blade 13 mm ( '). Read more on our website: https://www.tormek.com/international/en/grinding-jigs/svh-320-planer-blade-attachment

 

Tormek Tool Rest SVD-110 ·
By: Tormek Sharpening Innovation
November 06, 2012 · 33,679 views

For turning scrapers, hollowing tools and thin parting tools. Also for cabinet scrapers, screw drivers and spoke shave blades. Fast and secure locking on the Universal Support thanks to the patented design, which increases the locking force by 250%. Read more on our website: https://www.tormek.com/international/en/grinding-jigs/svd-110-tool-rest

 

Tormek Multi jig SVS-50 ·
By: Tormek Sharpening Innovation
November 06, 2012 · 44,213 views

For an exact replication of the shape on turning skew chisels with a straight or curved edge. Thanks to a unique design the jig also copes with oval section skews. Also for parting and beading tools and roughing gouges. Straight carving gouges up to 50 mm (2') wide. Max width of skews 32 mm (1 '). Learn more on our website: https://www.tormek.com/international/en/grinding-jigs/svd-110-tool-rest

 

Tormek Gouge Jig SVD-185 ·
By: Tormek Sharpening Innovation
November 06, 2012 · 88,627 views

UPDATE: As from 2016, this jig has been replaced with the SVD-186 Gouge Jig. Learn more here:https://www.tormek.com/international/en/grinding-jigs/svd-186-gouge-jig-svd-185/ For an exact replication of the shape on fingernail shaped turning gouges. Can be set for various lengths of the side bevel. Plus shaft for turning cutters. Also for bent carving gouges and V-tools. Max tool width 25 mm (1').

 

Tormek Short Tool Jig SVS-32 ·
By: Tormek Sharpening Innovation
November 06, 2012 · 29,572 views

UPDATE: This jig can now handle slightly wider tools with a max. width of 38 mm. Learn more here: https://www.tormek.com/international/en/grinding-jigs/svs-38-short-tool-jig-svs-32/ For straight shanked tools, such as wood chisels, carving gouges and tools for power carvers. Flanges ensure a 90 positioning of the tools towards the grindstone. Copes with tools down to 45 mm (1 ') length and max width 32 mm (1 ').

 

Tormek Axe jig SVA-170 ·
By: Tormek Sharpening Innovation
November 06, 2012 · 42,512 views

For carving and carpenter's axes. The head of the axe supports freely on the rubber lined stop so you can follow the shape of an individual edge, straight or curved. Learn more: https://www.tormek.com/international/en/grinding-jigs/sva-170-axe-jig

 

Tormek Scissors Jig SVX-150 ·
By: Tormek Sharpening Innovation
November 06, 2012 · 66,526 views

For scissors and shears. The scissors is mounted in a holder, which supports freely on a support plate so you can follow the individual convex shape of the scissors. Also for portable electric hand planer blades. Learn more: https://www.tormek.com/international/en/grinding-jigs/svx-150-scissors-jig

 

Tormek Long Knife Jig SVM-140 ·
By: Tormek Sharpening Innovation
November 06, 2012 · 221,887 views

This knife jig is developed especially for long and flexible knives, e.g. filleting knives. Its larger width, 140 mm (5 '), stabilizes a long and thin blade and the jig copes with blades longer than 160 mm (6 '). Learn more: https://www.tormek.com/international/en/grinding-jigs/svm-140-knife-jig

 

Tormek Knife Jig SVM-45 ·
By: Tormek Sharpening Innovation
November 05, 2012 · 100,227 views

For most knives. Width 45 mm (1 '). Long knives need to be stiff. Min. blade length 60 mm (2 3/8'). Also for carvers draw knives. The jig rests freely on the Universal Support so you can follow the curve of the blade. Learn more: https://www.tormek.com/international/en/grinding-jigs/svm-45-knife-jig

 

Lyle on Sharpening Lathe Tools ·
By: Lyle Jamieson
October 04, 2012 · 78,636 views

Lyle Jamieson shows the use of grinders and gringing jigs to sharpen woodturning tools.

 

Lyle on Sharpening High Speed Steel Cutters for Boring Bar ·
By: Lyle Jamieson
October 03, 2012 · 6,132 views

Lyle Jamieson demonstrates both handheld and jig sharpening of the 3/16 th HSS cutter.

 

Disc Sander Sharpenihg ·
By: john60lucas
September 17, 2012 · 11,259 views

This video shows how I sharpen on a disc sander

 

Wolverine Sharpening System (woodturning sharpening system) ·
By: Craft Supplies USA
September 12, 2012 · 128,378 views

Sharpen your woodturning tools accurately with the Wolverine Sharpening System. Learn more: https://www.woodturnerscatalog.com/p/93/817/Oneway-Wolverine-Sharpening-System-4-Piece-Set?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA The Basic System consists of two bases, V-arm support and the platform. The two bases allow a base to be installed at each wheel on your grinder, so the accessories can be used at either wheel. The V-arm Support supports the handle end of the woodturning or carving tool wh

 

Wood Turning For Beginners - Tool Sharpening ·
By: Mike Waldt
June 26, 2012 · 23,040 views

A video on my thoughts regarding tool sharpening when you start out woodturning. Not a definitive guide, just my personal views and observations.

 

Tormek visits luthier David Sundberg ·
By: Tormek Sharpening Innovation
June 21, 2012 · 24,111 views

Ever wondered how a luthier works? We visited David Sundberg in his workshop. Skilled guy with sharp chisels! Under the name Sundberg Guitars, David has delivered handmade guitars of the highest quality to many of Sweden's most talented artists, such as Lars Winnerbäck, Ane Brun and Ulf Wakenius. You will also find Sundberg Guitars outside Sweden. Ryan Adams, Mark Olson, Sivert Høyem and Frode Alnæs are just some of David's international customers. Each guitar is unique and is made specifically to meet each customer's specific requirements. Read more about the Tormek Sharpening System at https://www.tormek.com

 

Robert Sorby ProEdge Sharpening System ·
By: ThisWoodwork
June 20, 2012 · 97,416 views

A quick look at the Robert Sorby ProEdge sharpening system which Robert Sorby were kind enough to lend me for this review. Less of a review really, I simply take a look at its main features and demonstrate the sharpening of woodworking chisels as well as shapening skews and a fingernail grind on a bowl gouge, two jobs which can be particuarly difficult for woodturners. alex harris thiswoodwork teenwoodworker teen woodworker

 

Sharp knife by Tormek ·
By: Tormek Sharpening Innovation
May 25, 2012 · 19,949 views

A knife sharpened with The Tormek Wet Sharpening System. Learn more at https://www.tormek.com

 

Tormek TNT Sharpening System ·
By: Tormek Sharpening Innovation
May 02, 2012 · 10,617 views

The Tormek Instruction box, which contains a 1 hour 20 minutes DVD film and a handbook shows you how to shape and sharpen all your turning tools. Learn more at https://www.tormek.com/international/en/accessories/other-accessories/tnt-300-woodturners-instruction-box

 

How I Sharpen an Asymmetric Grind Bowl Gouge ·
By: Jake Gevorgian
April 14, 2012 · 5,934 views

Sharpening an asymmetric bevel grind bowl gouge. The idea is to have a 60 degree angle on one side and 45 degrees on the other. This is not too accurate, because it's done free hand. Also, this is quite different to turn. You've couple of gouges in one tool, so each angle will work differently. This tool has an accent, just like yours truly. My accent comes from knowledge and daily use of three different languages. Therefore, having multiple angles, this tool has a getting used to.

 

SHARPENING SYSTEM FOR GOUGE AND PLANE HOMEMADE ·
By: Jacques Fortin
April 11, 2012 · 824 views

SYSTEM SHARPENING HOMEMADE FOR PLANE , GOUGE AND SCRAPER

 

# 122A belt sander sharpening ·
By: Cap'n Eddie Castelin
March 25, 2012 · 73,262 views

A rig to mimick one of the new 'super sharpeners' on the market, on the cheap

 

Sharpening Spindle gouges ·
By: john60lucas
March 11, 2012 · 26,950 views

This video shows how I sharpen my spindle gouges

 

Skew Sharpening ·
By: john60lucas
February 19, 2012 · 16,526 views

This video shows my method for sharpening a skew and discusses other methods.

 

sharpening parting tool on 8 inch grinder ·
By: 207 Made
February 15, 2012 · 733 views

https://www.facebook.com/pages/Spencers-Wooden-Creations/112917125483794

 

Woodworking Tips & Techniques: Lathe - Sharpening Lathe Chisels ·
By: WoodWorkers Guild Of America
February 13, 2012 · 57,037 views

https://www.youtube.com/user/wwgoaeditor Woodworking Tips & Techniques: Lathe - George Vondriska shows us how to sharpen lathe chisels. A WoodWorkers Guild of America (WWGOA) original video. For woodworking videos, project plans & more, visit http://www.wwgoa.com!

 

skew.mpg ·
By: Darrell Feltmate
February 13, 2012 · 3,192 views

sharpening a skew. I do this free hand because it is just a straight line. For a sharpening jig to make, see http://aroundthewoods.com

 

THREAD CHASING in WOOD: TOOLS and SHARPENING ·
By: WYOMINGWOODTURNER
February 06, 2012 · 3,058 views

Thread chasing tools are sharpened. Tools of the turning trade are described and sharpened.

 

Sharpening your Easy Wood Tools ·
By: fool4peppers
February 02, 2012 · 8,579 views

Sharpening your Easy Wood Tool bit

 

Free hand sharpening-1.02 ·
By: Nakajima Shintaro
January 31, 2012 · 260 views

Supplementary explanation.

 

Free hand sharpening-1(治具無しでフィンガーネイル研ぎ) ·
By: Nakajima Shintaro
January 31, 2012 · 969 views

Free hand sharpening a spindle gouge by wet grinder. 湿式グラインダーを使ってフィンガーネイル形状の スピンドルガウジをフリーハンドで研いでいます。 治具を使うのがメンドクサイ人向け(笑

 

Robert Sorby Deluxe Universal Sharpening System ·
By: ian metheringham
January 22, 2012 · 4,171 views

Robert Sorby Deluxe Universal Sharpening System 447 Buy online now at ......http://www.turnerscabin.co.uk/index.php?main_page product_info&cPath 68_117&products_id 207

 

ProEdge Ultimate sharpening system ·
By: ian metheringham
January 22, 2012 · 479 views

A look at the Robert Sorby ProEdge Ultimate sharpening system Buy online now at .... www.turnerscabin.co.uk

 

Tormek TTS-100 Turning tool setter ·
By: ian metheringham
January 18, 2012 · 925 views

Tormek TTS-100 Turning tool setter This unique turning tool setter enables exact replication of the edge on bowl and spindle gouges as well as on flat and oval skews with a straight or a curved edge. The setter works with the articulated Gouge Jig SVD-185 and the Multi Jig SVS-50. The strength of the setter is that it works irrespective of the stone diameter and always produces the same edge angle. Built-in settings give pre-determined edge geometries as recommended by experienced turners. Buy on line at.......www.turnerscabin.co.uk

 

Tormek SVD-110 Tool rest ·
By: ian metheringham
January 18, 2012 · 368 views

Tormek SVD-110 Tool rest A universal toolrest that is easy to adjust and stays just where you set it. The wide plate is just the job for the sharpening of turning scrapers, carving scorps, inshaves, screwdrivers and re-truing of cabinet scrapers.

 

The Tormek T7 sharpening Water Cooled Sharpening System ·
By: ian metheringham
January 18, 2012 · 559 views

The Tormek T7 sharpening Water Cooled Sharpening System. An intro

 

Tormek T.N.T sharpening system ·
By: ian metheringham
January 18, 2012 · 943 views

A guide in to the T.N.T or touch and turn sharpening system from Tormek A comprehensive kit of jigs for those using wood turning tools - this kit offers Tormek accessories at great value for money. Spend less time sharpening and more time turning Buy on line at...http://www.turnerscabin.co.uk/index.php?main_page index&cPath 68

 

Sharpening the Tormek way ·
By: ian metheringham
January 18, 2012 · 275 views

A brief description in to the world of the Tormek sharpening world.... BUY ONLINE NOW...http://www.turnerscabin.co.uk/index.php?main_page index&cPath 68_115

 

THREAD CHASING in wood: TOOLS AND SHARPENING ·
By: WYOMINGWOODTURNER
January 06, 2012 · 3,436 views

Show tools used for chasing wooden threads by hand and sharpening

 

Scraper And Parting Tool Sharpening ·
By: Levier Fine writing Instruments
December 30, 2011 · 5,540 views

The Sharpening Process of 4 Turning Tool: 1/8 and 1/4 Parting Tool Round Nose Scraper and Square Nose Scraper Using the Jet Water Cooled Slow Speed Grinder In Combination with The Grinding Platform

 

Spindle Master ·
By: Levier Fine writing Instruments
December 25, 2011 · 4,417 views

Sharpening Proces of the Robert Sorby Spindle Master This Video will show the 3 basic Sharpening procedures for the Spindle Master: 1) Combination Sharpening Stone 2 Diamond File combo 3 Diamond File combo Plus the Levier Sharpening Method using The slow Speed Water Cooled Grinder

 

Skew(2).mov ·
By: Levier Fine writing Instruments
December 22, 2011 · 1,567 views

Video #4 for the Sharpening Series: 'Sharpening a 1 Inch and ,5 Inch Skew Chisel' Using the Jet Water Cooled Slow Speed Grinder in Combination With Tormek Jigs and the Kreg Multi-Mark The Levier Sharpening Process is no available to you

 

Robert Sorby MRG4 ·
By: Levier Fine writing Instruments
December 21, 2011 · 1,697 views

Video ·3 From the Sharpening Series of Levier Fine Writhing Instruments Sharpening Process of a Robert Sorby Micro Roughing Gouge using the Jet SSG (Slow Speed Grinding) in combination with Tormek Jigs and the Kreg Multi Mark

 

WR RG 3 ·
By: Levier Fine writing Instruments
December 20, 2011 · 1,379 views

Sharpening Process for a 1 inch Woodriver Rouging Gouge This tool has been Re-shaped or Transformed into a David Ellsworth Gouge Sharpening Process made by the Jet Water Cooled Grinder and several other jigs

 

RG1 ·
By: Levier Fine writing Instruments
December 15, 2011 · 434 views

Sharpening Process of a Roughing Gouge using a Low Speed Water Cooled Grinder

 

#102 Sharpening fine points ·
By: Cap'n Eddie Castelin
October 14, 2011 · 9,459 views

Better photos help explain some grinds

 

#101D Woodturning 101 Sharpen up ·
By: Cap'n Eddie Castelin
October 07, 2011 · 5,819 views

The wrap up in the sharpening series. I respond to questions and comments sent in during the series.

 

How I Sharpen the Alan Lacer Skew - Woodturning ·
By: Jake Gevorgian
October 06, 2011 · 8,309 views

Blog entry at http://paloarte.wordpress.com/2011/11/07/how-i-sharpen-the-skew-chisel/ In this video I'm showing the method that I use to sharpen the Alan Lacer woodturning skew. Basically, I mount a sticky back 220 grit abrasive; sandpaper; and move the bevel of the lightly, letting the bevel to rub against the sandpaper. A little darker (burned) colour on the sharpest edge of the skew indicates that it's ready to flip the tool over and work on the other side. This method can be dangerous, that is, sandpaper may come off the disk and the tool will catch. However, I think if you're an advanced woodturner or you know how and will a tool can break off, kick back or fly away, then you may be able to prevent this fatal accident. Anyhow, I don't recommend using this method, unless you're aware of circumstances.

 

101C Woodturning 101 sharpening chapter Three ·
By: Cap'n Eddie Castelin
October 02, 2011 · 12,372 views

The third chapter in sharpening tools. One more to wrap up the series.

 

#101B Woodturning 101 Sharpening chapter two ·
By: Cap'n Eddie Castelin
September 30, 2011 · 13,002 views

Sharpening tools. Multi tool and skew covered in this segment

 

101 makin shavings sharpening one ·
By: Cap'n Eddie Castelin
September 29, 2011 · 22,821 views

 

Using my double-ended sharpening block ·
By: SegmentedTurner
August 01, 2011 · 2,665 views

I give some pointers on how to get the best out of my sharpening block for woodturning tool bits.

 

Sharpening Problems 16May11 ·
By: john60lucas
May 16, 2011 · 12,330 views

This video will show how to correct grinding problems with the bowl gouge using the Wolverine jig. It also shows how I sharpen my hollowing scrapers and a dovetail scraper.

 

Knife Sharpening jig for the ProEdge from Robert Sorby ·
By: Robert Sorby
April 20, 2011 · 23,635 views

Sharpening all your household knives has never been easier than when using the Robert Sorby ProEdge sharpening system. Using the specially designed knife sharpening jig, this accessory is equally adept at sharpening hunting knives, kitchen knives and pocket knives.

 

Sharpening tips ·
By: john60lucas
April 10, 2011 · 36,750 views

This video shows some sharpening tips using the Oneway sharpening system and the wolverine Jig. It also shows sharpening the Stewart Batty Grind using the Oneway sharpening platform.

 

Sharp Fast wood tool sharpening system ·
By: TMIProducts1
April 09, 2011 · 9,715 views

Sharp Fast woodturning gouge sharpening guide and platform jig system for woodturning and woodworking tools. Sharpen bowl gouges, spindle gouges, roughing gouges, skews, chisels

 

06-12-10 (Part 6 of 6) Sharpening Turning Tools by Gary Gardner ·
By: Gwinnett Woodworkers
February 19, 2011 · 15,552 views

Original Gwinnett Woodworkers Association Class Date 06-12-10 Woodturning professional Gary Gardner talks about sharpening wood turning tools, grinders and the geometry necessary for getting the proper angle grind; and the physics involved in establishing the right cutting surface on your gouges to turn bowls. This is part 6 of 6 parts each about 15 minutes in length. Filmed and uploaded in HD.

 

06-12-10 (Part 5 of 6) Sharpening Turning Tools by Gary Gardner ·
By: Gwinnett Woodworkers
February 18, 2011 · 21,476 views

Original Gwinnett Woodworkers Association Class Date 06-12-10 Woodturning professional Gary Gardner talks about sharpening wood turning tools, grinders and the geometry necessary for getting the proper angle grind; and the physics involved in establishing the right cutting surface on your gouges to turn bowls. This is part 5 of 6 parts each about 15 minutes in length. Filmed and uploaded in HD.

 

06-12-10 (Part 4 of 6) Sharpening Turning Tools by Gary Gardner ·
By: Gwinnett Woodworkers
February 17, 2011 · 20,462 views

Original Gwinnett Woodworkers Association Class Date 06-12-10 Woodturning professional Gary Gardner talks about sharpening wood turning tools, grinders and the geometry necessary for getting the proper angle grind; and the physics involved in establishing the right cutting surface on your gouges to turn bowls. This is part 4 of 6 parts each about 15 minutes in length. Filmed and uploaded in HD.

 

06-12-10 ( Part 3 of 6) Sharpening Turning Tools by Gary Gardner ·
By: Gwinnett Woodworkers
February 17, 2011 · 18,491 views

Original Gwinnett Woodworkers Association Class Date 06-12-10 Woodturning professional Gary Gardner talks about sharpening wood turning tools, grinders and the geometry necessary for getting the proper angle grind; and the physics involved in establishing the right cutting surface on your gouges to turn bowls. This is part 3 of 6 parts each about 15 minutes in length. Filmed and uploaded in HD.

 

06-12-10 (Part 2 of 6) Sharpening Turning Tools by Gary Gardner ·
By: Gwinnett Woodworkers
February 16, 2011 · 21,174 views

Original Gwinnett Woodworkers Association Class Date 06-12-10 Woodturning professional Gary Gardner talks about sharpening wood turning tools, grinders and the geometry necessary for getting the proper angle grind; and the physics involved in establishing the right cutting surface on your gouges to turn bowls. This is part 2 of 6 parts each about 15 minutes in length. Filmed and uploaded in HD.

 

06-12-10 (Part 1 of 6) Sharpening Turning Tools by Gary Gardner ·
By: Gwinnett Woodworkers
February 16, 2011 · 32,052 views

Original Gwinnett Woodworkers Association Class Date 06-12-10 Woodturning professional Gary Gardner talks about sharpening wood turning tools, grinders and the geometry necessary for getting the proper angle grind; and the physics involved in establishing the right cutting surface on your gouges to turn bowls. This is part 1 of 6 parts each about 15 minutes in length. Filmed and uploaded in HD.

 

Sharpening and Using A Skew Chisel ·
By: ThisWoodwork
February 12, 2011 · 50,096 views

Sharpening and Using a skew chisel. In woodturning the skew chisel is a very versetile tool but requires the correct sharpening and use. woodturning woodturner woodwork wood turning project projects skills tricks skill tips sharpen how to lathe grinder jig tool gouge scew technique teenwoodworker alex harris teenager teenage woodworker workshop woodshop sharpening shavings

 

Sharpening Wood Turning Tools ·
By: Carl Jacobson
January 13, 2011 · 446,212 views

Learn the basics woodturning tool sharpening techniques. In this video I go over sharpening turning tools. What you need to get started turning. Basic set of turning tools. Tools and Supplies I use in my shop: ------------------------ Lathe Robust: http://www.turnrobust.com/ Easy Wood Tools: http://www.easywoodtools.com/ Thompson Lathe Tools: http://thompsonlathetools.com/ Howard beeswax: http://amzn.to/2zAv185 Band saw: http://amzn.to/2AlMUEP Spindle sander: http://amzn.to/2zjIf6e Air saw: http://amzn.to/2hJIMGP DA Sander: http://amzn.to/2zzEmN9 Face Shield: http://amzn.to/2y5gDQx sandpaper:

 

Woodturning: Sharpening Lacer Skew ·
By: theturnguy
December 25, 2010 · 10,156 views

Alan Lacer takes you through the shaping, sharpening and honing of two sizes of skew chisels. The skews being sharpened are part of the Hamlet Signature Tool line, made in England.

 

Little Buddy Bit Holder (how to sharpen small bits) ·
By: Craft Supplies USA
December 13, 2010 · 4,110 views

Sharpen small bits safely with the Little Buddy Bit Holder. Buy now: https://www.woodturnerscatalog.com/p/94/5191/Little-Buddy-Bit-Holder?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA This simple little sharpening jig keeps your fingers safely away from the grinding wheel while you sharpen small cutter bits. The double-ended design allows you to hold square cutter bits from 1/8' through 5/16'. Measures 1 3/4' x 1' x 5/8'. Allen wrench and instructions included. Made in USA. Craft Supplies USA (

 

sharpening a parting tool.avi ·
By: Cap'n Eddie Castelin
December 06, 2010 · 27,967 views

How to best sharpen your thin parting tool. I even show some very close ups of the edge.

 

Cindy Drozda - Sharpening the Hooked Box Scraper for Woodturning ·
By: Cindy Drozda
September 26, 2010 · 9,034 views

This is a description of my grinder setup, and how I sharpen my signature Negative Rake Hooked Box Scraper. Please visit my website, http://www.cindydrozda.com for more information about me, my Artwork and Woodturning Instruction. Instructional Woodturning DVDs, Signature Woodturning Tools, Supplies and Accessories for Woodturning are now available for online ordering! Questions and Comments are invited.

 

Cindy Drozda - Sharpening the Square Recess Scraper for Woodturning ·
By: Cindy Drozda
September 06, 2010 · 8,696 views

In this video, I will describe and sharpen my signature Negative Rake Square Recess Scraper. Please visit my website, http://www.cindydrozda.com for more information about me, my Artwork and Woodturning Instruction. Instructional Woodturning DVDs, Signature Woodturning Tools, Supplies and Accessories for Woodturning are now available for online ordering! Questions and Comments are invited.

 

Cindy Drozda - Sharpening the Vortex Tool for Woodturning ·
By: Cindy Drozda
September 03, 2010 · 10,950 views

Here is a description of how I sharpen my Signature Vortex Tool for Woodturning. Please visit my website, http://www.cindydrozda.com for more information about me, my Artwork and Woodturning Instruction. Instructional Woodturning DVDs, Signature Woodturning Tools, Supplies and Accessories for Woodturning are now available for online ordering! Questions and Comments are invited.

 

Cindy Drozda - Sharpening Gouges for Woodturning ·
By: Cindy Drozda
August 16, 2010 · 244,202 views

Here is the method that I use to sharpen my gouges. I'll be sharpening a spindle roughing gouge, bowl gouge, and my Cindy Drozda Signature Spindle Gouge that I use to turn my fine finials. I sharpen gouges on a Wolverine platform. This video footage is excerpted from my DVD 'Finial Star'. Please visit my website, http://www.cindydrozda.com for more information about me, my Artwork and Woodturning Instruction. Instructional Woodturning DVDs, Signature Woodturning Tools, Supplies and Accessories for Woodturning are now available for online ordering! Questions and Comments are invited.

 

Cindy Drozda - Sharpening the Arc Tool for Woodturning ·
By: Cindy Drozda
August 16, 2010 · 8,355 views

In this video, I show you how I sharpen my Cindy Drozda Signature Negative Rake Arc Scraper. This tool is used for making fine finishing cuts on turned wood. You can see it in action on my Instructional Woodturning DVDs 'Fabulous Finial Box' and 'Finial Star'. Please visit my website, http://www.cindydrozda.com for more information about me, my Artwork and Woodturning Instruction. Instructional Woodturning DVDs, Signature Woodturning Tools, Supplies and Accessories for Woodturning are now available for online ordering! Questions and Comments are invited.

 

Quick and Easy ways to Sharpen Turning Tools Sharpening a bead tool ·
By: Carl Jacobson
March 22, 2010 · 12,196 views

http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects with Carl Jacobson. Wood turning basics on a Lathe with basic wood turning tools. Taking you from start to finish To Sharpen turning tools Bead Tool.Quick and Easy Tool Sharpening Put a razor-sharp edge on your chisels - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Sharpening Demystified with Kirk DeHeer (woodturning DVD preview) ·
By: Craft Supplies USA
March 12, 2010 · 5,641 views

A preview of Kirk DeHeer's woodturning video 'Sharpening Demystified'. Buy now: https://www.woodturnerscatalog.com/p/99/4332/Kirk-Deheer-Sharpening-Demystified-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA This video offers a thorough explanation of the process of sharpening basic turning tools including jigs and freehand sharpening. In addition, Kirk covers advanced sharpening techniques and provides valuable information on grinders and various types of grinding wheels. Includes a quick-start

 

Sharpening my way Segment 3 of 3 ·
By: Bob Hamilton
January 28, 2010 · 8,809 views

This is segment 3 of 3 of a video showing the way I grind and hone my turning tools.

 

Sharpening my way Segment 2 of 3 ·
By: Bob Hamilton
January 28, 2010 · 16,379 views

This is segment 2 of 3 of a video showing the way I grind and hone my turning tools.

 

Sharpening my way Segment 1 of 3 ·
By: Bob Hamilton
January 28, 2010 · 74,855 views

This is segment 1 of 3 of a video showing the way I grind and hone my turning tools.

 

Free blackhawk Sharpening Template ·
By: Cap'n Eddie Castelin
June 18, 2009 · 26,733 views

Cap'n Eddie shares a great way to remember the settings for sharpening your favorite gouges. Have a particular setting for your ellsworth, fingernail or spindle gouge? This rig will remember that exact bar setting and get you there everytime. And it's yours free. Want a copy? Send an e-mail to eddiecastelin@cox.net and I'll send you the pdf, FREE!

 

Skew Sharpening tactics ·
By: Cap'n Eddie Castelin
May 25, 2009 · 16,448 views

Sharpen your skew the easy way. Make an edge that will eliminate most catches and create a great surface

 

Tormek Stone Grader SP-650 ·
By: Tormek Sharpening Innovation
May 20, 2009 · 21,856 views

This video has been replaced with http://youtu.be/eYNkEKS5-KY. For changing the function of the grindstone. The fine side grades the stone for a 1000 grit finish. The coarse side of the grader reverses the stone to normal fast grinding. Activates a glazed stone.

 

Tormek AngleMaster WM-200 ·
By: Tormek Sharpening Innovation
May 19, 2009 · 28,285 views

This video has been replaced with http://youtu.be/zFmGfDULpiQ. Sets and measures the edge angle. Adjustable to any stone diameter from 250 mm or 10' down to 150 mm or 6'. Measures from 10 to 75 . Magnets keeps it in place.

 

Tormek Turning Tool Setter TTS-100 ·
By: Tormek Sharpening Innovation
May 19, 2009 · 23,753 views

This video has been replaced with http://youtu.be/nOK3J7DgQOQ. For instant replication of the geometries on turning gouges and skews when using the SVD-185 Gouge Jig and the SVS-50 Multi Jig. With built in edge geometries. Works on any stone diameter.

 

Tormek Truing Tool TT-50 ·
By: Tormek Sharpening Innovation
May 19, 2009 · 41,976 views

This video has been replaced with http://youtu.be/MWZMJVFMx30. Trues the grindstone exactly round and flat. Guided by the Universal Support, which also guides the jigs. Screw feed with dual knobs for smooth feed across the stone. The cutting depth can be set within 0,25 mm (0,01').

 

Tormek Scissors Jig SVX-150 ·
By: Tormek Sharpening Innovation
May 19, 2009 · 25,342 views

This video has been replaced with http://youtu.be/IVl8lTiMlAA. For scissors and shears. The scissors is mounted in a holder, which supports freely on a support plate so you can follow the individual convex shape of the scissors. Also for portable electric hand planer blades.

 

Tormek Multi Jig SVS-50 ·
By: Tormek Sharpening Innovation
May 19, 2009 · 46,640 views

This video has been replaced with http://youtu.be/lO0aOUIvPf4. For an exact replication of the shape on turning skew chisels with a straight or curved edge. Thanks to a unique design the jig also copes with oval section skews. Also for parting and beading tools and roughing gouges. Straight carving gouges up to 50 mm (2') wide. Max width of skews 32 mm (1 ').

 

Tormek Knife Jig SVM-45 ·
By: Tormek Sharpening Innovation
May 19, 2009 · 33,869 views

This video has been replaced with http://youtu.be/4k5VAW3qOu4. For most knives. Width 45 mm (1 '). Long knives need to be stiff. Min. blade length 60 mm (2 3/8'). Also for carvers draw knives. The jig rests freely on the Universal Support so you can follow the curve of the blade.

 

Tormek Planer Blade Attachment SVH-320 ·
By: Tormek Sharpening Innovation
May 19, 2009 · 61,579 views

This video has been replaced with http://youtu.be/MfBH5vtVVdU. For blades of any length. Blades longer than 270 mm (10 ') are relocated in the blade holder and ground in two steps. The grinding depth can be set within 0,1 mm (0,004'). Min width of blade 13 mm ( ').

 

Tormek Gouge Jig SVD-185 ·
By: Tormek Sharpening Innovation
May 19, 2009 · 115,962 views

This video has been replaced with http://youtu.be/v7V4bjePKkM. For an exact replication of the shape on fingernail shaped turning gouges. Can be set for various lengths of the side bevel. Plus shaft for turning cutters. Also for bent carving gouges and V-tools. Max tool width 25 mm (1').

 

Tormek Tool Rest SVD-110 ·
By: Tormek Sharpening Innovation
May 19, 2009 · 20,899 views

This video has been replaced with http://youtu.be/Os6bYD-zIIs. For turning scrapers, hollowing tools and thin parting tools. Also for cabinet scrapers, screw drivers and spoke shave blades. Fast and secure locking on the Universal Support due to the patented design, which increases the locking force by 250%.

 

Tormek Axe Jig SVA-170 ·
By: Tormek Sharpening Innovation
May 19, 2009 · 14,834 views

This video has been replaced with http://youtu.be/KXRysXAUwTw. For carving and carpenters axes. The head of the axe supports freely on the rubber lined stop so you can follow the shape of an individual edge, straight or curved.

 

Tormek Square Edge Jig SE-76 ·
By: Tormek Sharpening Innovation
May 19, 2009 · 20,062 views

This video has been replaced with http://youtu.be/KZ07gPtB6pg. For plane irons and wood chisels. Aligns a wood chisel automatically parallel to the Universal Support. Safety stops prevent the tool from slipping off the stone and hurt your knuckles. Max tool width 76 mm (3').

 

Introduction film to the Tormek system ·
By: Tormek Sharpening Innovation
May 18, 2009 · 102,262 views

Edge tool sharpening the Tormek way

 

Using the sharpening block with my tools ·
By: SegmentedTurner
March 23, 2009 · 2,169 views

This gives a quick demonstration on using the sharpening block to hold the tool bit while sharpening it on a standard bench grinder. For more information about my work please visit my web site at http://www.DWMontville.com.

 

AAW's Fundamentals of Sharpening ·
By: American Association of Woodturners
March 11, 2009 · 4,384 views

This is a brief snippet from the 1 hour, 30 minute DVD - Woodturning: Fundamentals of Sharpening. Click on this link to purchase a copy: http://www.woodturner.org/shop/Products.asp

 

Sharpening a Sorby Scraper Blade ·
By: Cap'n Eddie Castelin
December 31, 2008 · 18,269 views

A quick and easy way to sharpen a Sorby scraper blade of any size. A quick and easy jig costing under 5.00 and taking only minutes to make.

 

Sharpening Woodturning Tools using Tormek ·
By: bestsharpening
October 10, 2008 · 165,248 views

How to sharpen a bowl gouge, spindle gouge and a skew chisel. The Tormek TNT Sharpening system delivers a superior edge on your woodturning gouges and woodturning skews faster and easier than any method available today. The gouge jig and skew jig are easy to set by using the TTS-100 turning tool setter. The finer edge obtained with the Tormek method and the water cooling, which eliminates overheating, make the edge stay sharp longer. You sharpen less and turn more. View more at www.tormek.com.

 

fingernail grind Gouge ·
By: Cap'n Eddie Castelin
August 21, 2008 · 63,021 views

Grinding a detail gouge to a double bevel grind.

 

How to use the Lifetime Diamond Wheel Dresser ·
By: Craft Supplies USA
June 16, 2008 · 46,581 views

Sharpen your grinding wheel with the Lifetime Diamond Wheel Dresser from Craft Supplies USA. Buy now: https://www.woodturnerscatalog.com/p/94/5189/Turners-Select-Lifetime-Diamond-Wheel-Dresser?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA This is the best value diamond dresser on the market. The 1' width produces a flat surface on the face of the wheel while removing embedded particles . The newly exposed cutting surface sharpens faster with less heat buildup. When dressing the wheel, the Diamond

 

Robert Sorby Deluxe Universal Sharpening System ·
By: Robert Sorby
February 27, 2008 · 46,604 views

Sharpen your tools with the Robert Sorby Deluxe Universal Sharpening System

 

Ultimate sharpening system by ProEdge from Robert Sorby ·
By: Robert Sorby
January 17, 2008 · 28,680 views

ProEdge is a revolutionary sharpening system introduced by Robert Sorby. In fact, the concept is far from new as the ProEdge largely replicates the tool sharpening system which has evolved in the Robert Sorby factory over many, many years. This compact system is now available to woodworkers whether operating in a large workshop or small shed.

 

Sharpening Oland Woodturning Tools ·
By: Darrell Feltmate
September 12, 2007 · 3,607 views

Sharpening the Oland tool with a home made jig from aroundthewoods.com !express# !metadata#!version#v1.0.r291!/version#!format#1.001!/format#!totalTime#36087!/totalTime#!width#400!/width#!height#300!/height#!maxSceneSize#104230!/maxSceneSize#!clientPublishTime#Wed Sep 12 14:30:42 GMT-0300 2007!/clientPublishTime# !/metadata# !scenes#!scene# !asset path 'http://www.youtube.com/remixer/assets/graphics/black_background.png' type 'ImageContent'#!stamp time '0'# !display#true!/display# !volume#0.75!/volume# !render#!b#0!/b#!ty#30!/ty#!tx#40!/tx#!c#0!/c#!a#1!/a#!d#1!/d# !/render# !mute#fals

 

sharpening spindle gouges: aroundthewoods.com ·
By: Darrell Feltmate
May 10, 2007 · 35,384 views

Sharpening wood turning spindle gouge on a home made jig. http://aroundthewoods.com

 

sharpening wood turning tools: aroundthewoods.com ·
By: Darrell Feltmate
May 10, 2007 · 49,574 views

Sharpening a roughing tool and an Oland tool on a home made jig. http://aroundthewoods.com

 

sharpening roughing gouges: aroundthewoods.com ·
By: Darrell Feltmate
May 10, 2007 · 15,154 views

Sharpening wood turning roughing gouges with home made jig. http://aroundthewoods.com

 

sharpening Oland wood turning tools: aroundthewoods.com ·
By: Darrell Feltmate
May 10, 2007 · 11,670 views

Sharpening Oland wood turning tools with a home made jig. http://aroundthewoods.com

 

sharpening bowl gouges: aroundthewoods.com ·
By: Darrell Feltmate
May 10, 2007 · 10,788 views

sharpening a wood turning bowl gouge with long wings, home made jig http://aroundthewoods.com

 

Return to Turning Videos

Great Bargains


Heavy Duty Live Center

On Sale for only $16.53

List Price: $19.95

Click here for more information or to purchase

 


Dremel Rotary Tool Kit

On Sale for only $139.00

Save $60.99 (30%)

List price: $199.99

Click here for more information or to purchase


Roller Stand

On Sale for only $23.79

Save $6.11 (20%)

List Price: $29.90

Click here for more information or to purchase

 


Easy Wood Tools - Easy Start Rougher + Finisher + Detailer

On Sale for only $159.99

List price: $206.97

These tools have the smaller 9" maple handle and are 12.5" overall.

Click here for more information or to purchase


NOVA 48232 G3 Reversible Wood Turning Chuck

On Sale for only $99.00

Save $60.99 (38%)

List price: $159.99

Click here for more information or to purchase

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Sheffield Woodturning
Woodchux
Arizona Carbide

(Click any Ad to go to our Sponsor's Website)