Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Spindle Turning Videos (101)

Sort by

Or click here to: Search All Videos


Jim Rodgers, Lesson 01, Intro and Spindle Roughing Gouge
By: Jim Rodgers
August 31, 2019 · 15 views

The first video of a series on woodturning basics - The Spindle Roughing Gouge.

 

Spindel turnering, timelaps - Baluster
By: B.W. Woodturning
August 30, 2019 · 383 views

I'm still new to this kind of details, so I'm using gauges to help me achieve a perfect result.

 

Spindle gouge wood turning
By: Christian Noël
May 25, 2019 · 97 views

40/40 bowl gouge, detail gouge, vortex gouge

 

Skew chisel - spindle turning
By: Christian Noël
May 22, 2019 · 44 views

Érable / Maple

 

Woodturning Tip - Mounting a jacked up spindle blank using the Elio-DR drive center
By: Tod Raines
December 21, 2018 · 291 views

Produced by Tod Raines of Woodturning Tool Store on December 21, 2018 A real short video tip on how the Elio-DR drive center solves the problem of uneven mounting points. Find the Elio-DR drive center at woodturningtoolstore.com Visit Woodturning Tool Store https://woodturningtoolstore.com Social media links Facebook: https://www.facebook.com/woodturningtoolstore Google : https://plus.google.com/ TodRaines Instagram: https://www.instagram.com/traines64

 

The Spindle - Part 13 (conclusion)
By: Ron Calverley
November 16, 2018 · 514 views

My neighbor asked me to duplicate a couple of large spindles for him. The original came from their old homestead farm house. I just couldn't say no.

 

The Spindle - Part 12
By: Ron Calverley
November 15, 2018 · 407 views

My neighbor asked me to duplicate a couple of large spindles for him. The original came from their old homestead farm house. I just couldn't say no.

 

The Spindle - Part 11
By: Ron Calverley
November 14, 2018 · 468 views

My neighbor asked me to duplicate a couple of large spindles for him. The original came from their old homestead farm house. I just couldn't say no.

 

The Spindle - Part 10
By: Ron Calverley
November 13, 2018 · 453 views

My neighbor asked me to duplicate a couple of large spindles for him. The original came from their old homestead farm house. I just couldn't say no.

 

The Spindle - Part 9
By: Ron Calverley
November 12, 2018 · 508 views

My neighbor asked me to duplicate a couple of large spindles for him. The original came from their old homestead farm house. I just couldn't say no.

 

The Spindle - Part 8
By: Ron Calverley
November 10, 2018 · 551 views

My neighbor asked me to duplicate a couple of large spindles for him. The original came from their old homestead farm house. I just couldn't say no.

 

The Spindle - Part 7
By: Ron Calverley
November 09, 2018 · 464 views

My neighbor asked me to duplicate a couple of large spindles for him. The original came from their old homestead farm house. I just couldn't say no.

 

The Spindle - Part 6
By: Ron Calverley
November 08, 2018 · 386 views

My neighbor asked me to duplicate a couple of large spindles for him. The original came from their old homestead farm house. I just couldn't say no.

 

The Spindle - Part 5
By: Ron Calverley
November 07, 2018 · 500 views

My neighbor asked me to duplicate a couple of large spindles for him. The original came from their old homestead farm house. I just couldn't say no.

 

The Spindle - Part 4
By: Ron Calverley
November 06, 2018 · 605 views

My neighbor asked me to duplicate a couple of large spindles for him. The original came from their old homestead farm house. I just couldn't say no.

 

The Spindle - Part 3
By: Ron Calverley
November 05, 2018 · 490 views

My neighbor asked me to duplicate a couple of large spindles for him. The original came from their old homestead farm house. I just couldn't say no.

 

Jim Rodgers, Lesson 3, The Shallow Fluted Spindle Gouge
By: David Bentley
October 20, 2018 · 338 views

This video is about Jim Rodgers, Lesson 3, The Shallow Fluted Spindle Gouge, Jim Rodgers Woodturner, Jim Rodgers Woodturning Teacher, The detail gouge, Woodturning Tools, Lesson 3, The Bowl Gouge, The detail gouge,

 

Turning Spindles
By: Lee Burkholder
September 17, 2018 · 225 views

Cumberland Valley Wood Turners, wood working, lathe, wood turning, spindle turning, milk stool, making a wooden stool

 

The Spindle - Part 2 (quick update)
By: Ron Calverley
September 11, 2018 · 361 views

My neighbor asked me to duplicate a couple of large spindles for him. The original came from their old homestead farm house. I just couldn't say no.

 

The Spindle - Part 1
By: Ron Calverley
September 10, 2018 · 532 views

My neighbor asked me to duplicate a couple of large spindles for him. The original came from their old homestead farm house. I just couldn't say no.

 

Jim Rodgers Intro and Spindle Gouge
By: David Bentley
September 06, 2018 · 3,400 views

This video is about Jim Rodgers Intro to the Spindle Gouge, BAWA, The Bay Area Woodturners Association, Woodturning Tool Usage, The Spindle Roughing Gouge, How to use the Spindle Roughing Gouge, How to sharpen the spindle roughing gouge, Ways to use the Spindle Roughing Gouge, Jim Rodgers Woodturner, Jim Rodgers.

 

using basic woodturning tools/ spindle roughing gouge
By: Geiserwoodturner
August 28, 2018 · 405 views

In this video tutorial I show how to use a spindle roughing gouge to make a wood blank round. This video is part of a series on how to use beginning woodturning tools on your wood lathe. I show how to make a maple blank into a cylinder as we prepare to move on to our next video in the series. This is the part where we let shavings fly and make messes while working on a foot massager project. Join us next time when I use a parting tool. Standard YouTube license Videos by Geiserwoodturner are intended for entertainment purposes. It is your responsibility to learn and understand how to safely operate your tools. Use good sense and be safe!

 

Using basic woodturning tools/ between centers
By: Geiserwoodturner
August 20, 2018 · 360 views

How to use basic wooturning tools. In this video tutorial I show how to mark the centers on a wood blank and mount it between centers on a wood lathe. This is part 1 in a series of how to use traditional woodturning tools. We are starting a project making a foot massage roller from maple. We'll have lots of fun and teach about the very basics of woodturning. Disclaimer: This video and description contains affiliate links. This means if you click on these links and make a purchase I will receive a small commission. Thank you for your support! Here are some basic tools for making mounting

 

Making Shavings / Spindle Practice Session
By: Yuval Lahav Woodturning
July 13, 2018 · 3,372 views

I had to make some black shavings to fill up some cracks in an Olive bowl I'm working on, so I chucked up a spindle piece of African Blackwood and started chipping away. Since it was already set up, I never miss a chance to practice my spindle turning, so I give you 17 minutes, non stop, no edits and no time lapse, of one of these practice sessions. Patreon: https://www.patreon.com/YuvalLahav Twitter: https://twitter.com/YL_Woodturning Instagram: https://www.instagram.com/yuval_lahav_woodturning/ Facebook: https://www.facebook.com/yuval.lahav.16 Instructables: http://www.instructables.com/mem

 

Ruedas para Carretilla Parte 3
By: Daniel Vilarino
June 04, 2018 · 3,692 views

Hola/Hi! ***This video is in Spanish, if you prefer to watch it in English, please click on the following link:*** https://youtu.be/H0f0NRjQXrU Este video está enEspañol. Esta es la tercera parte de una serie de videos para realizar unas ruedas de madera para una carretilla estilo antiguo para mis amigos, Ariel y Jacqueline. En este tercer episodio, realizo el torneado de todos los elementos que requieren perfilado, incluyendo los rayos de las ruedas, el eje que conecta ambas ruedas, las patas y el asa de la carretilla. ***This is the third part in a series of videos to make wooden wheels fo

 

'Skate Into Catch' : EL-1207 (from Part II)
By: Eric Lofstrom
June 03, 2018 · 42 views

2017 Eric Lofstrom, https://www.EricLofstrom.com/ Music: Track 11) What It Is: Lynn Patrick's 'Fire Mountain' album, 2012 Lynn Patrick, BMI, https://www.LynnPatrick.com/ YouTube: Lynn Patrick Music - - - - - - Executive Producer - Eric Lofstrom Associate Producer - Walt Lofstrom : Photography, Sound and Production Studio Lighting - Rich Lofstrom Lighting Consultant - JC Adamson - - - - - - To purchase videos or arrange woodturning instruction, Contact: Eric@EricLofstrom.com

 

'Catch' : EL-1206 (from Part II)
By: Eric Lofstrom
June 02, 2018 · 32 views

2017 Eric Lofstrom, https://www.EricLofstrom.com/ Music: Track 08) Cowgirl's Day Off: Lynn Patrick's 'Fire Mountain' album, 2012 Lynn Patrick, BMI, https://www.LynnPatrick.com/ YouTube: Lynn Patrick Music - - - - - - Executive Producer - Eric Lofstrom Associate Producer - Walt Lofstrom : Photography, Sound and Production Studio Lighting - Rich Lofstrom Lighting Consultant - JC Adamson - - - - - - To purchase videos or arrange woodturning instruction, Contact: Eric@EricLofstrom.com

 

'Skate' : EL-1205 (from Part II)
By: Eric Lofstrom
June 02, 2018 · 38 views

2017 Eric Lofstrom, https://www.EricLofstrom.com/ Music: Track 01) Snow Dunes: Lynn Patrick's 'Fire Mountain' album, 2012 Lynn Patrick, BMI, https://www.LynnPatrick.com/ YouTube: Lynn Patrick Music - - - - - - Executive Producer - Eric Lofstrom Associate Producer - Walt Lofstrom : Photography, Sound and Production Studio Lighting - Rich Lofstrom Lighting Consultant - JC Adamson - - - - - - To purchase videos or arrange woodturning instruction, Contact: Eric@EricLofstrom.com

 

Spindle turning how I hand turn accurate copies.
By: woodturner21
February 03, 2018 · 86,333 views

This video is another stair spindle but a large section and I explain what I am doing while I turn.

 

Fastest wooden turning
By: wooden Turner
December 16, 2017 · 55 views

One of the fastest turning [lattu]

 

Making a Shaving Stand and Spindle Practice
By: Tony Walters
December 05, 2017 · 107 views

 

Turning Between Centres Masterclass with Record Power's Stuart Pickering
By: Record Power
March 09, 2017 · 4,656 views

This masterclass gives a comprehensive introduction to turning spindles between centres.

 

Turning a Spindle
By: Steve Lindsley
March 06, 2017 · 1,197 views

I needed a few spindles for a gift project so I decided to turn my own. The original project, from the October 2003 issue of WOOD Magazine, used 3/8' dowels. I thought the project would look better with a turned spindle. As shown in the video I dyed the spindle and the other parts of the project. The walnut I used was kilned dried which, from my experience, tends to get lighter over time. I wanted the project to maintain a nice walnut color over time. The dye was a combination of 1 part Medium Brown, 1 part Light Brown and 1 part Vintage Cherry. All dyes I used were from General Finishes. The projects turned out very nice and were well received by the recipients. If you have any questions or comments please leave them below. Thanks for watching!

 

Replicating Spindle Turnings
By: Windy City Woodturners
March 03, 2017 · 188 views

Don Johnston demos replcating spindles using calipers, story sticks, and features to make similar spindles.

 

Hand woodturning copy turning by eye of short Oak spindles
By: woodturner21
February 25, 2017 · 591,739 views

This shows the skills of quick and accurate turning needed for production work this was the first ever of this pattern and done by eye watch to the end to see how accurate they are.

 

Spindle turning thin spindles - Beads and Coves
By: Walter Wager
February 21, 2017 · 10,996 views

Video demonstrates turning beads and coves on a thin spindle between centers.

 

Woodturning Spindle Gouge Practice
By: Rock Springs Woodturner
April 04, 2016 · 8,512 views

Just a little video on spindle gouge practice. In this video I share a simple way to practice spindle gouge control and making coves. Cutting side and end grain.

 

Beginning WoodTurning: Turning a Square Blank into a Cylinder
By: Barry's Woodturning
February 21, 2016 · 5,124 views

In this video, I show how to turn a Square spindle blank into a Cylinder. I focus on the need to cut 'downhill' and to incorporate bevel supported cuts using the 'ABC' method. I'd love to read your questions in the comments section, and if you have any suggestions for future videos, please let me know.

 

Baluster - Spindle Turning
By: Century Porch Post
January 11, 2016 · 1,514 views

Our workshop continually turns out quality. Watch our team at work.

 

Turning a long Spindle-just for practice by Sam Angelo
By: WYOMINGWOODTURNER
December 22, 2015 · 4,087 views

Sam practices some detail work on a thin spindle.He highlights the detail gouge as well as a small skew chisel.

 

Cutting Backwards On Spindles
By: BMac Woodturning
December 11, 2015 · 553 views

Erik Anderson, The Naked Turner, was making knitting needles recently and I mentioned cutting backwards on a think piece to reduce forcing the cut and bending the wood. Erik's channel - https://www.youtube.com/channel/UCfdxhrmOgVlW4le9B3T34JQ

 

Douglas Fir stair spindle hand woodturning
By: woodturner21
October 12, 2015 · 8,378 views

A demonstation of turning a Douglas fir stair spindle by hand to match a pattern. All coments are welcome.

 

Log spindle turner
By: WoodenNicol
September 30, 2015 · 6,698 views

A Woodennicol creation for turning log spindles for deck rails, furniture and any project that logs may be used for!

 

Turning long thin spindles, Part2.
By: Ian Robbo Robertson
August 05, 2015 · 1,760 views

The second and final part of turning long skinny stuff.

 

Turning long thin spindles. Part1.
By: Ian Robbo Robertson
July 13, 2015 · 3,356 views

Turning long thin spindles can be a challenge. I hope this video gives you some hints.

 

Hand woodturning stair spindles
By: woodturner21
April 29, 2015 · 4,700 views

I have had requests for a closer view of me turning a spindle. The quality is not brilliant as I filmed it with my phone taped to my chest

 

Spindle Work: Cutting Side Grain and End Grain
By: Brian Havens
March 13, 2015 · 10,017 views

See how to cut side grain and end grain effectively in spindle work, and how the same cuts that work for each grain orientation in spindle work are essentially the same cuts that we used in facework. Cover tool: Crown 1/2' shallow gouge with a traditional grind Woods: Callery Pear and Black Walnut Prerequisites: 'Facework: Cutting End Grain' 'Facework: Cutting Side Grain'

 

Turning simple mushrooms on spindle
By: JuniorTurner01
December 12, 2014 · 164 views

My first low quality video. My way of turning mushrooms.

 

End Grain Cutting On Spindle Work
By: RickTurns
November 09, 2014 · 2,439 views

Woodturning: Take a look at various methods of cutting across the end grain of spindle projects, and see which method produces the best surface. Music courtesy of Audionautix.com

 

Trimming Technique for Laminated Spindle Turning Blanks 2
By: SegmentedTurner
October 02, 2014 · 4,298 views

This is another technique you can use to trim the overlap layers of a laminated spindle turning blank using your table saw. This is best suited to blanks larger than 1 1/2 inches square.

 

Turning a 1 1/2 x 30 interior maple stair spindle
By: Century Porch Post
August 19, 2014 · 573 views

Very top is cut off with the band saw once spindle is turned. Top is exactly 3/4' diameter to it can be inserted into the bottom of the handrail.

 

Decorative Porch Corbel Spindle
By: Century Porch Post
August 12, 2014 · 296 views

These small decorative turnings are used in porch brackets. Turned from clear pine material.

 

woodturning stair spindle
By: Matthew Richardson
July 14, 2014 · 288 views

hand turning one of a batch of 25 stair spindles

 

A Gluing Fixture for Spindle Blanks
By: SegmentedTurner
February 23, 2014 · 3,833 views

This is a simple gluing fixture that makes clamping the end caps and waste blocks for spindle turning blanks quick and easy.

 

Wood Turning With Naked Turner%2C Redwood Spindle Form
By: Erik Anderson
January 26, 2014 · 826 views

 

Woodturning a Spindle
By: Jake Gevorgian
January 08, 2014 · 1,078 views

This is for a historic house in Anaheim. Sorry for the pneumatic air noise. It's coming from the panel saw which is situated not too far from me in the cabinet shop.

 

Spindle Turning Safety for the Wood Lathe
By: WYOMINGWOODTURNER
December 03, 2013 · 109,166 views

Sam covers the importance of being safe when turning spindles on the lathe. He offers some tips on preventing injury and accidents while using the spindle roughing gouge as well as mounting wood between centers.

 

Multi Axis Spindle Turning With Barbara Dill Video1
By: Barbara Dill
November 26, 2013 · 33,089 views

This video was taken in2010 in my shop. Every time I teach this, I learn something new about the information or the way I want to present it, so I have make a book that contains this information. I can add to the book and change things as I need to. I can't change the video. To order my book, go to my web site and it is on the Teaching page. www.bararadill.com

 

Stances-Spindle Gouge
By: woodturningwithtim1
February 09, 2013 · 4,245 views

Your feet are just as important as your hands when it comes to turning. Their placement determines the direction and smoothness of your cuts. Spindle gouges demand a lot of foot adjusting to make even simple shapes. This clip shows the correct stances for using a spindle gouge to make a bead.

 

Lyle on Spindle Turning-Coves
By: Lyle Jamieson
October 03, 2012 · 3,290 views

Lyle Jamieson stresses bevel-supported techniqes for turning concave surfaces on a spindle.

 

Lyle On Spindle Turning-Beads
By: Lyle Jamieson
October 03, 2012 · 12,955 views

Lyle Jamieson stresses bevel-supported tool control and demonstrates 2 methods of rolling a bead.

 

How to turn a very long wooden pole or spindle
By: WoodTurningUK
August 09, 2012 · 30,606 views

Sometimes your stock is too long for your lathe- i.e. the tailstock cannot hold it. Or, the piece can be held by the tailstock, but it vibrates too much for you to turn it properly. In both situations, a steady rest solves the problem. Please visit the new website for the new TriSpin steady rest www.kengarner.co.uk

 

Cours de tournage sur bois avec Eddy Noel - Spindle turning
By: Eddy Noel
July 27, 2012 · 73,468 views

Inscrivez-vous à un cours de tournage sur bois avec Eddy Noel: http://eddynoel.com/fr/cours-de-tournage-sur-bois/ COURS D'INITIATION ET COURS AVANCÉS 1) COURS D'INITIATION AU TOURNAGE SUR BOIS: Cours de huit heures (cours bilingue) Les sujets suivants sont abordés: • Description et origine du tour à bois • Equipement nécessaire et complémentaire • Description et aiguisage des ciseaux et gouges • Protection, sécurité et traitement de la poussière de bois • Genre de tournage et manière de monter la pièce • Bois sec et bois vert • Ponçage et finition • Révision des points

 

Turning a Support Spindle
By: DentonTurners
July 18, 2012 · 8,413 views

This is the demonstration from the July 2012 meeting of the Golden Triangle Woodturners in Denton, Texas. Neal Brand shows us how to turn a Support Spindle that is used to spin raw material such as wool into thread for use in weaving. Find more at http://www.goldentrianglewoodturners.org

 

Minis 2 - Two Long Radii Curves (Onion Neck) with Sanding Trick
By: charlieb1946
July 13, 2012 · 1,405 views

This video ( 2 of 2 on cuts) shows you how I to turn the neck of a Drozda-esque 'onion' finial. Though shown turned with a 1/4' spindle / detail gouge, a curved edge skew could also be used - more as a scraper than a cutter. I've also done videos using these basic cuts to turn a miniature plate, bowl, hollow form, hollow form with finial and a Sphere with Finial & Icicle on a Pedestal.. I've also done Illustrated Step by Step HOW TOs you can print, add notes to while watching one of these videos - and take to your lathe to try out what I've showed you. Miniatures are quick and fun to turn. Try it, you'll probably like it! http://web.hypersurf.com/ charlie2/Turning/Miniatures/Miniatures1.html If you have any questions you can post them here or e-mail them to me at charlieb@accesscom.co

 

Turning a Wooden Bead
By: David Smith
June 20, 2012 · 13,180 views

Turning a Wooden Bead using a tapered mandrel. Companion to the article on my web site: http://www.davidreedsmith.com/Articles/Necklace/Necklace.htm

 

Spiral Catches
By: joelarese
April 28, 2012 · 479 views

Woodturner Joe Larese shows why spiral catches occur and offers strategies on ways to avoid them.

 

Wood Turning With Naked Turner, Redwood Spindle Form
By: Erik Anderson
March 17, 2012 · 1,097 views

Wood Turning Video

 

Spindle Turning, Using Skew Chisel as a Primary Tool
By: Jake Gevorgian
January 31, 2012 · 23,998 views

This spindle is a part of previously shown spindles. This is an experimental work. The purpose of this video is to show how I use the skew chisel in a better camera view. The video has been recorded using iPhone 4S. The tripod had been modified---that is, a wood board, with a 1/4'-8 threaded nut insertion is attached to the tripod, a clamp is attached to the wooden board, the iPhone is inserted to the lightly squeezing clamp.

 

Just some Spindle turning
By: Jake Gevorgian
January 28, 2012 · 2,943 views

at this stage these are just spindles. if things go well, and if time is enough, i've to manage to make a moroccan panel, called mosharabia

 

A video guide to the Robert Sorby Spindlemaster - YouTube.flv
By: ian metheringham
January 22, 2012 · 1,152 views

A video guide to the Robert Sorby Spindlemaster Buy online now at ....http://www.turnerscabin.co.uk/index.php?main_page product_info&cPath 66_99_142&products_id 416

 

Spindle Master
By: Levier Fine writing Instruments
December 25, 2011 · 5,479 views

Sharpening Proces of the Robert Sorby Spindle Master This Video will show the 3 basic Sharpening procedures for the Spindle Master: 1) Combination Sharpening Stone 2 Diamond File combo 3 Diamond File combo Plus the Levier Sharpening Method using The slow Speed Water Cooled Grinder

 

Crude spindle steady
By: Bob Hamilton
November 16, 2011 · 55,904 views

This is the crude spindle steady I made a few years ago and it works well enough that I have never bothered to change it. I don't use a steady very often and this one seems to do the job when I need it. These clips are excerpted from my tall, thin stemmed goblet video where they were edited out due to the length of the video.

 

robo hippy Bowl Finish Cuts with a Spindle Roughing Gouge
By: robohippy
October 12, 2011 · 5,239 views

robo hippy demonstrates proper and safe use of a spindle roughing gouge on a bowl. film clip by eden z films

 

Cindy Drozda - How to use the Drozda Spindle Gouge for Woodturning
By: Cindy Drozda
September 04, 2011 · 55,779 views

How to use my signature spindle gouge to make finely detailed spindles, like the elegant finials that I'm known for. In my other videos, I show how I use my other signature tools, and how to sharpen them. Please visit my website, http://www.cindydrozda.com for more information about me, my Artwork and Woodturning Instruction. Instructional Woodturning DVDs, Signature Woodturning Tools, Supplies and Accessories for Woodturning are now available for online ordering! Questions and comments are invited.

 

Cindy Drozda - How to use the Drozda Spindle Gouge for Woodturning
By: Cindy Drozda
September 01, 2011 · 43,796 views

How to use my signature spindle gouge to make finely detailed spindles, like the elegant finials that I'm known for. In my other videos, I show how I use my other signature tools, and how to sharpen them. Please visit my website, http://www.cindydrozda.com for more information about me, my Artwork and Woodturning Instruction. Instructional Woodturning DVDs, Signature Woodturning Tools, Supplies and Accessories for Woodturning are now available for online ordering! Questions and Comments are invited.

 

Finding the center on a spindle waste block
By: SegmentedTurner
August 31, 2011 · 2,126 views

I show how to use a center drill in the hole saw when making spindle waste blocks to mark the center at the same time you make the block.

 

NEFWA April 2011 - Spindle Design and Turning - Part 3 of 3
By: North East Florida Woodturners Association
May 01, 2011 · 230 views

Spindle Design and Turning Part 3 of 3 Demonstration by Ed Malesky and Emory Mclaughlin at the April 2011 meeting of the Northeast Florida Woodturners Association.

 

NEFWA April 2011 - Spindle Design and Turning - Part 2 of 3
By: North East Florida Woodturners Association
May 01, 2011 · 294 views

Spindle Design and Turning Part 2 of 3 Demonstration by Ed Malesky and Emory Mclaughlin at the April 2011 meeting of the Northeast Florida Woodturners Association.

 

NEFWA April 2011 - Spindle Design and Turning - Part 1 of 3
By: North East Florida Woodturners Association
May 01, 2011 · 500 views

Spindle Design and Turning Part 1 of 3 Demonstration by Ed Malesky and Emory Mclaughlin at the April 2011 meeting of the Northeast Florida Woodturners Association.

 

coveturning
By: WoodturningFYP2011
March 22, 2011 · 358 views

 

Parallel / Taper Turning
By: WoodturningFYP2011
March 21, 2011 · 3,713 views

Parallel and Taper Turning a Spindle using the Skew chisel

 

woodturning stair spindle
By: woodturner21
February 18, 2011 · 6,109 views

This is a video of me turning one of 50 simple 900mm lg. stair spindles to match the originals. Check out my web site www.thewoodturners.com Sorry about the quality it was done on a phone.

 

Bead turning Test Video
By: WoodturningFYP2011
January 17, 2011 · 529 views

Simple quality test video; spindle gouge bead turning on wood lathe

 

Torneado longitudinal - Ejercicio Práctico - Arte en torno
By: Arte en Torno
November 27, 2010 · 941 views

 

Turning a spindle
By: GJJoinery
August 13, 2010 · 739 views

Gjjoinery turning a spindle

 

JoHannes Michelsen--Hand Turning Balusters
By: JoHannes Michelsen
July 10, 2010 · 4,419 views

joHannes has 100 balusters to turn by hand and he is trying to get it up to speed, should be able to get these fairly easy tool finish balusters down to five minutes each. Using HannesTool Gouges a pair of calipers and a fluted parting tool speed is attainable.

 

hand turned spindle.wmv
By: davedalbywoodturning
May 02, 2010 · 1,055 views

Here I am doing what I do best, standing at a lathe making round stuff. This is a spindle sent to us by a client and we had to make 3 copies. Not worth setting up a copy lathe for so I hand turned it. The whole job takes about 8 minutes so no big deal.

 

Arte en Torno - Torneado de columna en madera Parte 1/12
By: Arte en Torno
March 18, 2010 · 7,516 views

Torneado de una columna en madera por el maestro Cesar Perez (tornero profesional)

 

Turning a face grain spindle Segment 3 of 3
By: Bob Hamilton
February 11, 2010 · 4,914 views

This is the third of 3 segments of a video exploring different gouge cutting techniques when used on a spindle turning that has the grain oriented perpendicular to the lathe bed rather than parallel. The question arose when a fellow was having trouble getting a clean cut on a blank he had laminated for a hand plane knob.

 

Turning a face grain spindle 2 of 3
By: Bob Hamilton
February 11, 2010 · 5,880 views

This is the second of 3 segments of a video exploring different gouge cutting techniques when used on a spindle turning that has the grain oriented perpendicular to the lathe bed rather than parallel. The question arose when a fellow was having trouble getting a clean cut on a blank he had laminated for a hand plane knob.

 

Turning a face grain spindle Segment 1 of 3
By: Bob Hamilton
February 11, 2010 · 521,645 views

This is the first of 3 segments of a video exploring different gouge cutting techniques when used on a spindle turning that has the grain oriented perpendicular to the lathe bed rather than parallel. The question arose when a fellow was having trouble getting a clean cut on a blank he had laminated for a hand plane knob.

 

Entertaining Woodturning Video - Spindle Turning Basics - Century Porch Post Inc.
By: Century Porch Post
February 07, 2010 · 37,225 views

14' long Porch Post / wood column turned by Master Wood turner at Century Porch Post. Entire post made from kiln dried, eastern white pine. Lathe capacity is 20'.

 

Berger scoop segment 4 of 7 - Finishing the spindle turning
By: Bob Hamilton
December 29, 2009 · 6,102 views

This is my attempt at turning a scoop like the one Soren Berger demonstrates in the video under the AAW tab at: http://www.woodworkingchannel.com/dolphin/vidego_video_library.php My main purpose in making this was to demonstrate an alternative chucking method for hollowing the scoop.

 

End grain hollowing with a 1/2 spindle gouge
By: Bob Hamilton
May 01, 2009 · 66,655 views

This is a different angle and closer view of the cut I use for hollowing the cup on the ball & cup toy. I also use if for hollowing goblets or end grain boxes.

 

Stretcher Turning
By: Peter Galbert
December 25, 2008 · 8,557 views

Peter Galbert demonstrates measuring and turning stretchers for the undercarraige of a perch

 

High Speed Staircase Baluster
By: Peter Galbert
September 23, 2008 · 41,498 views

Turning a staircase baluster on a lathe, shown highspeed to demonstrate the importance of process planning

 

Double Bobbin Leg Turning
By: Peter Galbert
April 27, 2008 · 9,243 views

Turning a leg for a Windsor chair

 

entre pointe
By: tournar
March 31, 2008 · 6,186 views

mise en forme

 

tournage entre pointes
By: tournar
February 25, 2008 · 1,560 views

je dégrossi

 

A video guide to the Robert Sorby Spindlemaster
By: Robert Sorby
February 14, 2008 · 48,784 views

A video guide to the Robert Sorby Spindlemaster. The Spindlemaster is ideal for small projects like boxes and rattles, and works just as effectively on large pieces like bedposts and staircase spindles. If you have reservations about using a skew chisel, the Spindlemaster is the answer. It is also available in micro size for those miniature or small projects like finials, pens, lace bobbins.

 

Return to Turning Videos

Great Bargains
(ends November 27, 2019)


Customized Electric Branding Iron

On Sale for only $99.99

Save $20.00

List price: $119.99

This customized, 110V electric branding iron will let you imprint your woodturnings in way that will never fade away. You will be able to order from fifteen different standard-size design choices, enter your custom text and proof the final design. The delivery of your custom burning head will take 2 - 3 weeks.

Click here for more information or to purchase

 


Rockler Mini Carbide Pen Turning Tools

On Sale for only $149.99

Save $70.00

List Price: $219.99

This three piece set has comfortable rubber handles which provide excellent control and reduce fatigue—replaceable carbide tips require no sharpening. The 3-piece sets comes with diamond, square and round carbide tipped tools.

Click here for more information or to purchase

 


Bar Tool Turning Kits

Get the 5 Piece Set for only $68.95

Save $15.00

Everything you need to turn out cocktails that friends will rave about—includes all five of their Bar Tool Turning Kits in one cost-saving package. Includes: bottle opener, double jigger, muddler bar, bar spoon, cocktail strainer and 5 threaded inserts.

Click here for more information or to purchase


Pen Press/Drilling Jig

For only $89.99

Save $10.00

List Price: $99.99

Drill and assemble your pens perfectly with flush fittings and a smoothly-operating mechanism! This dual-purpose jig takes care of both prep work and assembly. It holds your blank firmly in position for drilling, creating a precise, perfectly centered hole the entire length of the pen. Later, it smoothly presses your parts together without any bowing or misalignment. Notched jaws automatically center the blank for drilling, while two countersunk holes center the parts during assembly. Large clamping wheel provides slow, controlled pressure so you'll never crack a casing again.

Click here for more information or to purchase


Trend® Air Circulating Airshield Pro

For only $369.99

Save $30.00

List Price: $399.99

Protect your lungs, face and eyes during virtually any woodworking task with the air-circulating Trend® Airshield Pro. Its built-in fan circulates filtered air to prevent fogging, provide cooling and protect users from dust particulates down to 0.6 microns in size at a 98% efficiency rate. This model also meets ANSI Z87+ standards for eye-protection. It features an improved headband with a ratchet suspension and pivoting nape back strap for enhanced comfort, fit and durability. The nickel metal hydride battery allows for up to eight hours of operation on a full charge, twice the length of previous models. Includes a charger, airflow indicator and pre-installed plastic film overlay to prevent buildup of sap after heavy turning jobs, and to prevent scratching.

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Hunter Woodturning Tools
Stainless Steel Bottle Stoppers
Rockler

(Click any Ad to go to our Sponsor's Website)