Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Turning Jigs Videos (3)

Sort by

Or click here to: Search All Videos


Paul Howard Sphere Jig Unboxing and Setup
By: John Clothier
August 11, 2018 · 2,678 views

I recently purchased the Paul Howard Sphere jg and in this video I will unbox it and show you around setting it up. I then show you the basics of how to use it to turn a sphere. The jig can be purchased from https://www.paulhowardwoodturner.co.uk/ John Clothier is proudly supported by Hampshire Sheen - for finishing products https://www.hampshiresheen.com/ House of Resin - for Resin http://houseofresin.co.uk/ Yorkshire Grit - for Abrasive Paste http://yorkshire-grit.com/ Dont forget to visit my other social media: Website - https://www.johnclothier.co.uk Instagram - https://www.instagram.com/JohnClothierUK/ Facebook - https://www.facebook.com/JohnClothierUK/ Twitter - https://twitter.com/JohnClothierUK John Clothier is a proud member of Small Workshop YouTube Makers group on Facebook https://www.facebook.com/groups/109030066480071/ Makers Media Network http://makersmedianetwork.com/ The Association of Woodturners of Great Britain https://www.awgb.co.uk

 

Jig For Hand Cutting Spirals On The Lathe
By: Carl Jacobson
April 08, 2016 · 23,888 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg Spiral cutting Jig! This jig is used for hand cutting spirals on the lathe. Make your own ribbons, or barley twist. I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 Yuval Lahav https://www.youtube.com/watch?v VQQ7fSBhx9w I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule de

 

Review of the Iron Fire Indexing Jig for your lathe
By: H F Bowern Designs - Harold Bowern
September 24, 2015 · 1,442 views

Welcome back This week I am taking a look at a new indexing system I bought for my Delta 12' lathe. The index system built into my , is a 24 pinned stop system I had gotten an email from my local woodworking supply store about another type of indexing system that would add even more choices of stops. The jig is made by Iron Fire Innovations in the US. Their website is www.ironfirellc.com Check their website for all the jigs they make and other details. What you get when you buy the jig is a quality plastic disc, a metal pin to use as your new index pin and the instructions on how to use

 

Return to Turning Videos

Great Bargains
(ends April 25, 2019)


Square Mini Ergonomic Carbide Turning Tool

On Sale for only $49.99

Save $30.00

List price: $79.99

This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Click here for more information or to purchase

 


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase

 


Rockler Four-Piece Cheese Knife Turning Kit

7/8" On Sale for only $29.99

1 1/4" On Sale for only $39.99

Save $10.00

List Price: $39.99

The cheese cutters are made from food-grade 304 stainless steel and attached to the handles which you turn. The kit includes 1/4-20 threaded inserts. The cheese cutters themselves are dishwasher safe; the handles are easily removed for this purpose.

Click here for more information or to purchase


GVS Elipse P100 Half Mask Respirator with 2 Bonus Filters, Small/Medium

For only $25.99

Save $11.99

List Price: $37.98

These Elipse P100 Half-Mask Respirators from GVS are designed to protect against dust particles, metal fumes, mists, oil and water vapors, and even some micro-organisms. Each mask includes two low-profile filters, which permit a wide field of view, and won't interfere with safety glasses and sanding shields. The filters are easily interchangeable, and replacement filters are readily available.

Click here for more information or to purchase


Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat

For only $32.74

Save $13.70

List Price: $46.44

Shell offers built-in chin protection and extended top-of-head coverage. Highly adjustable headgear tilts visor nearer or farther from face depending on preference and application. Comfortable cell foam on back of headgear. Breathable, removable, washable headband. Comfortably worn with most goggles and respirators.

Click here for more information or to purchase


4-Piece Safety Kit

For only $19.99

Save $15.00

List Price: $34.99

Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Ideal for table saw and router table use. Angled push blocks feature ultra-grippy Bench Cookie pad material. They are great for jointer and router table applications. Table featherboard assists in holding stock against the fence while sawing or routing and helps to reduce kickback. It fits standard 3/4" x 3/8" miter slots found on table saws and router tables, and features expandable miter track bars for maximum holding power.

Click here for more information or to purchase


Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Arizona Carbide
Saburrtooth
Robust Tools

(Click any Ad to go to our Sponsor's Website)