Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Workshop Videos (129)

Sort by

Or click here to: Search All Videos


Sam's new Montana Shop an Update with Sam Angelo
By: WYOMINGWOODTURNER
October 03, 2019 · 5,056 views

In this video Sam will review what has been done to date on construction of his new shop: rough-electrical wiring, insulation, sheetrock delivered and ready to hang. The 'move in' date could be days away. Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions

 

ACK'S GIVEAWAY and Shop update
By: Kim Tippin Wood Turning
September 24, 2019 · 2,828 views

Type 'ACK'S' In the comment section below for your entry to WIN ACK's ABRASIVE PASTE AND RESTORING POLISH!!! Sorry, this is for US residents only. Thank you EVERYONE for your support and encouragement! ETSY STORE LINK: https://www.etsy.com/shop/TippinWoodturnings INSTAGRAM: @ktwoodturningnphoto FACEBOOK: https://www.facebook.com/kimtippinwoodturning My Email: 2COR517KT@gmail.com Products I use. Starbond: https://www.starbond.com/?rfsn 3108589.69aa8a Total boat: http://www.totalboat.com/ https://www.youtube.com/channel/UCbTMPp5eIyEt2pFJcMLrUDA Supplies for resin: https://amzn.to/2MGOp

 

Shop Remodel
By: Carl Jacobson
September 21, 2019 · 8,385 views

Shop Remodel We remodeled the mobile shop in time for our next road trip. I under coated the floor, and built a mobile cart for a new Harvey lathe and Kodiak sharpening system. I also installed a Harvey Champion bandsaw. Harvey Woodworking https://www.harveywoodworking.com/ Wood Turners Wonders https://woodturnerswonders.com/ Stuart Kent https://stuartkent.com/ YOU CAN ALSO FIND ME: https://www.etsy.com/shop/Thewoodshoptv http://www.thewoodshop.tv/ https://www.instagram.com/thewoodshop.tv/?hl en https://www.facebook.com/thewoodshoptv/ I put together a list of some of the tools

 

Sam's New Montana Shop: Phase 3 the Framing Sam Angelo
By: WYOMINGWOODTURNER
September 14, 2019 · 4,849 views

In this video Sam shows the framing of his new shop from setting the walls to lifting trusses up with a crane....Phase 3 ends with a quick tour of the shop layout-the rough wiring is complete and the walls are ready for insulation and sheetrock. In phase 4 asphalt shingles will cover the roof and the outside walls will be sided. Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions

 

My New Shop Tour
By: Woodturning Arts
September 08, 2019 · 2,094 views

Like/Share/Comment/Subscribe and Thanks for Watching! Important Links: About This Channel: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/about?view_as subscriber Channel Discussion Page: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/discussion?view_as subscriber My Playlists: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/playlists?view_as subscriber Audio Information:

 

Sam's New Shop: Phase 2-Concrete work Sam Angelo
By: WYOMINGWOODTURNER
August 22, 2019 · 4,382 views

In this video Sam will show all the concrete work done on his new shop-build which includes forming and pouring the footers, 4' walls, and finally pouring the 40' x 40' slab. The next video will be covering the rough framing: Phase 3. Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com

 

Woodturning a garage into a workshop (I hope)
By: RickTurns
August 17, 2019 · 5,582 views

Five months ago, I moved from Georgia to Maryland, and haven't published any actual woodturning videos since then. Today, that changes!!!!!! The music during the close of the video, 'Happy Little Elves' by Audionautix, is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

New shop update/shop tour
By: Thomas Anton Geurts
August 14, 2019 · 3,297 views

 

Sam's New Shop: Phase 1 Diggin' in the Dirt Sam Angelo
By: WYOMINGWOODTURNER
July 23, 2019 · 3,480 views

Finally settled into a new home in Montana Sam Angelo shows off the early stages of his workshop construction. In this short video Sam begins a series that will eventually culminate with his finished shop. Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom

 

Naked Turner Shop Update
By: Erik Anderson
July 10, 2019 · 1,329 views

Super Quick Update!

 

My Garage Shop in Montana Sam Angelo the Wyomingwoodturner
By: WYOMINGWOODTURNER
June 28, 2019 · 6,159 views

Sam sets up a 'temporary' garage shop in Billings, Montana. A BIG shout out to the Worland Wyoming Woodturners for their help in moving us to Montana and their support over the years. In my next video I WILL turn a box elder burl bowl....Stay tuned, Sam Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom

 

Shop update with cool stuff
By: Rons Woodturning shop
June 27, 2019 · 221 views

Guys gave me some cool pipeline stuff instead of throwing it away. Going to have fun with your help on how to re-purpose it into something cool

 

Shop Update #14 -- And a depth gauge hack for DC
By: Billy Burt
June 27, 2019 · 125 views

June has been an incredibly crazy and busy month. With two grandkids graduating high school, a wedding and the wife's retirement party it's been quite hectic around here. Not to mention that it has been raining a lot and the resulting necessary yard work has kept me out of the shop. And we have our family vacation coming up the first week in July. I also show you how I added a depth gauge to my dust collector bin. Thanks for watching and come back to see what we're up to. Music provided by The Wood Yogi: The Wood Yogi - Workshop Jig T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ https://acdcreations.com Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com #dustcollectorbindepthgauge #depthgaugedustcollectorbin #DIYdepthguage

 

Workshop Update
By: Miss Tee's Woodturning
May 17, 2019 · 139 views

Just a quick update on my workshop. It's full of almost 30 years of junk and it's taken a while to even get this far. Now summer's here I hope to get a lot more clearing done.

 

Workshop Update - Makers Central 2019
By: John Clothier
May 08, 2019 · 739 views

A quick workshop update video about Makers Central 2019. John Clothier is proudly supported by Record Power - Woodworking machines and tools https://www.recordpower.co.uk/ Hampshire Sheen - for finishing products https://www.hampshiresheen.com/ House of Resin - for Resin http://houseofresin.co.uk/ Yorkshire Grit - for Abrasive Paste http://yorkshire-grit.com/ Dont forget to visit my other social media: Website - https://www.johnclothier.co.uk Instagram - https://www.instagram.com/JohnClothierUK/ Facebook - https://www.facebook.com/JohnClothierUK/ Twitter - https://twitter.com/JohnClothierUK John Clothier is a proud member of Small Workshop YouTube Makers group on Facebook https://www.facebook.com/groups/109030066480071/ Makers Media Network http://makersmedianetwork.com/ The Association of Woodturners of Great Britain https://www.awgb.co.uk

 

Shop Update #12 -- Why I haven't posted lately
By: Billy Burt
April 26, 2019 · 163 views

This video is a short explanation of why I have not posted anything lately. Come back and see the finished turnings. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com Music provided by The Wood Yogi: The Wood Yogi - Workshop Jig

 

STICKERS ! Shout out, shop update.
By: The Pohl Barn Productions
March 05, 2019 · 2,282 views

Huey LionsHeart https://www.youtube.com/channel/UCHIWp6WhijK6TUQdjGifrtg Jordan Woodwerx https://www.youtube.com/channel/UCyMIfEdQovchHDFILeRGhnA PF Woodturning https://www.youtube.com/feed/subscriptions/UCYjEuaj4FyoZiZxfsrAfitA TearEm's Turnings https://www.facebook.com/T.E.Turnings/ MG MAKES https://www.youtube.com/channel/UCdVdb0Vmg9I1ZWO8p-w8lhQ Sponsored by Total Boat and Jamestown Distributors Find them here. use PROMO CODE POHLBARN for 20% off totalboat.com or jamestowndistributors.com resin I use www.alumilite.com www.resin4art.com totalboat.com or jamestowndistributors.com Y

 

My Workshop and Channel Update 2019
By: Twisted Crafts UK
March 03, 2019 · 763 views

In this week’s video I show you where I am at with the workshop upgrade and go through some of the equipment I use. I have put links in to where I got most of the equipment I use and also links to my other social media pages. …………………………………………………………………………………………………………………. https://www.instagram.com/twistedcraftsuk/ …………………………………………………………………………………………………………………. https://www.facebook.com/twistedcraftsuk/ …………………………………………………………………………………………………………………. All music from: https://www.epidemicsound.com/ …………………………………………………………………………………………………………………. Here are some links for some of the equipment I use. Eas

 

Woodturner's Workbench: Introduction... Sam Angelo Wyomingwoodturner
By: WYOMINGWOODTURNER
February 19, 2019 · 2,448 views

In this video Sam introduces his 'Woodturner's Workbench' The link to the playlist below holds 5 process videos showing how he put this bench together---- This video is a a grand tour of the bench showing dovetails and should vice. Please share with other folks who work with wood. Link to “Woodturner’s Work Bench” Playlist by Sam Angelo https://goo.gl/hcig9j Lake Erie Tool Works https://www.lakeerietoolworks.com Domidrewno (Website) Videos on building the “Demo Bench” Scroll down to- Workbench Building Video Series https://www.lakeerietoolworks.com/pages/woodworker-info Please find my work on the following sites wyomingwoodturner http://www.wyomingwoodturner.com Sam’s Artwork at samangelo.com http://www.samangelo.com/1/index.php/home/art-by-sam Ron Brown’s Tools and Accessories http://www.samangelo.com/1/index.php/home/tools-and-supplies ETSY https://www.etsy.com/shop/wyomingwoodturnercom

 

Woodturner's Workbench: Part 5 Assembling the Base Sam Angelo Wyomingwoodturner
By: WYOMINGWOODTURNER
February 19, 2019 · 1,736 views

Part 5 the Woodturner's work bench In this video Sam will put the finishing touches on his work bench by assembling the base by joining the legs together with stretchers. He will create mortise and tenon joints with his router and bandsaw. Link to “Woodturner’s Work Bench” Playlist by Sam Angelo https://goo.gl/hcig9j The Work Bench Book-- https://goo.gl/uvTjCQ Lake Erie Tool Works https://www.lakeerietoolworks.com Domidrewno Videos on building the “Demo Bench” Scroll down to- Workbench Building Video Series https://www.lakeerietoolworks.com/pages/woodworker-info Please find my work on the following sites wyomingwoodturner http://www.wyomingwoodturner.com Sam’s Artwork at samangelo.com http://www.samangelo.com/1/index.php/home/art-by-sam Ron Brown’s Tools and Accessories http://www.samangelo.com/1/index.php/home/tools-and-supplies ETSY https://www.etsy.com/shop/wyomingwoodturnercom

 

Woodturner's Workbench; Part 4 Assembling the Shoulder Vice Sam Angelo Wyomingwoodturner
By: WYOMINGWOODTURNER
February 19, 2019 · 1,911 views

Woodturner's Workbench Part 4-- Sam assembles the shoulder vice on his workbench. He shows in detail how to build a traditional shoulder vice for his workbench. Link to “Woodturner’s Work Bench” Playlist by Sam Angelo https://goo.gl/hcig9j Lake Erie Tool Works https://www.lakeerietoolworks.com Domidrewno Videos on building the “Demo Bench” Scroll down to- Workbench Building Video Series https://www.lakeerietoolworks.com/pages/woodworker-info Please find my work on the following sites wyomingwoodturner http://www.wyomingwoodturner.com Sam’s Artwork at samangelo.com http://www.samangelo.com/1/index.php/home/art-by-sam Ron Brown’s Tools and Accessories http://www.samangelo.com/1/index.php/home/tools-and-supplies ETSY https://www.etsy.com/shop/wyomingwoodturnercom

 

WOODTURNERS WORKBENCH: Part 3 DOVETAILING the Corners Sam Angelo the Wyomingwoodturner
By: WYOMINGWOODTURNER
February 19, 2019 · 1,650 views

Woodturner's Workbench Part 3 Dovetailing the Corners Sam Angelo, the Wyomingwoodturner, continues a woodworking project in which he builds a 'Woodturner's Workbench.' This will be a series of videos starting with (Part 1) milling and design: (part 2) gluing the top. And in this video (part 3) Sam spends time cutting dovetails in the corners in preparation for assembling the Shoulder Vice. If you know anyone who may need a workbench in his or her shop, please share this project. Link to “Woodturner’s Work Bench” Playlist by Sam Angelo https://goo.gl/hcig9j Lake Erie Tool Works http

 

Woodturner's Workbench -PART 2 Gluing the Top Sam Angelo Wyomingwoodturner
By: WYOMINGWOODTURNER
February 19, 2019 · 1,919 views

Woodturner's Workbench Part 2 Gluing the top ---Sam Angelo, the Wyomingwoodturner continues a woodworking project in which he will build a 'Woodturner's Workbench.' This will be a series of videos starting with (Part 1) milling and design. Then in this video (part 2) Sam glues together the top of his bench top and introduces the holdfasts. If you know anyone who may need a workbench in his or her shop, please share this project. Link to “Woodturner’s Work Bench” Playlist by Sam Angelo https://goo.gl/hcig9j Lake Erie Tool Works https://www.lakeerietoolworks.com Domidrewno Videos on

 

Woodturners Workbench: PART 1 Milling and Design Top Sam Angelo
By: WYOMINGWOODTURNER
February 19, 2019 · 2,251 views

Sam Angelo, the Wyomingwoodturner begins an ambitious woodworking project in which he will build a 'Woodturner's Workbench.' This will be a series of videos starting with assembling the top then joinery in the frame, building the shoulder vice and assembling the base. If you know anyone who may need a workbench in his or her shop, share this project. Link to “Woodturner’s Work Bench” Playlist by Sam Angelo https://goo.gl/hcig9j Lake Erie Tool Works https://www.lakeerietoolworks.com Domidrewno Videos on building the “Demo Bench” Scroll down to- Workbench Building Video Series https://www.lakeerietoolworks.com/pages/woodworker-info Please find my work on the following sites wyomingwoodturner http://www.wyomingwoodturner.com Sam’s Artwork at samangelo.com http://www.samangelo.com/1/index.php/home/art-by-sam Ron Brown’s Tools and Accessories http://www.samangelo.com/1/index.php/home/tools-and-supplies ETSY https://www.etsy.com/shop/wyomingwoodturnercom

 

Woodturning Shop Tour with Michael Gibson
By: Mike Peace Woodturning
February 15, 2019 · 3,667 views

I visit the shop of noted woodturner and wood artist Michael Gibson. Michael has demonstrated woodturning all over the world and may be best known for his beautiful wood teapots. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3/other-woodturning-resources/ See more of Michael Gibson's work at his homepage http://www.michaelgibsonwoodturner.com

 

My New Workshop Is Almost Ready
By: Woodturning Live With Steve Twydell
February 13, 2019 · 382 views

A live show where I make and create projects live from from my workshop in Ireland. Come join in with the live chat and watch as I continue with a project I started last Wednesday !! If you would like to help with the running costs of my channel please click and tip :-) Thank you xx TIP HERE https://youtube.streamlabs.com/templeboyturnings MY MEDIA INFO Templeboy Turnings Web site and shop :- http://templeboyturnings.com/ Templeboy Turnings Facebook page :- https://www.facebook.com/TempleboyTur... Templeboy Turnings Twitter :- https://twitter.com/TempleboyTurnin Templeboy Turnings Instagram :- https://www.instagram.com/templeboytu... Templeboy Turnings patreon :- PLEASE SUPPORT MY CHANNEL HERE https://www.patreon.com/Templeboyturner My Webpage www.templeboyturnings.com

 

Shop Update #11 -- I've been ill
By: Billy Burt
February 04, 2019 · 138 views

This video is a short explanation of why I have not posted anything lately. Come back and see the finished bowl. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com Music provided by The Wood Yogi: The Wood Yogi - Workshop Jig

 

woodturning Shop Tour
By: Woodslee Summercraft
February 04, 2019 · 848 views

just a quick tour of my shop, maybe a few ideas for your shop or if you have any suggestions for my shop id love to hear about them.

 

2019 Shop Tour
By: Myers Woodshop
January 31, 2019 · 14,086 views

This is the first ever Myers Woodshop Shop Tour. Since I've began my woodworking journey, this shop has seen a lot of changes. In 2018 I blew out a wall and expanded to twice the size. 16x20. It's still not big enough, but I'm blessed to have a dedicated shop space to call my own. You can find a lot of the tools in my shop on my amazon page here: https://www.amazon.com/shop/myerswoodshop Become a Patreon Member! https://www.patreon.com/myerswoodshop FILMING GEAR Panasonic Lumix (main camera) : http://amzn.to/2BVA9nH Rode Microphone : http://amzn.to/2HQxdcv GoPro Hero 5 Black : htt

 

one lathe moved over
By: Rons Woodturning shop
January 30, 2019 · 351 views

Managed to move my small Turncrafter lathe into my new shop. Worked on an epoxy project and made my neighbor a simple pen.

 

Shop Update #10 -- 2018 in Review
By: Billy Burt
January 07, 2019 · 130 views

This video is a short (for me) review of 2018 and bit of what is coming in this new year. My goal is to do more turning videos in 2019. Come back and see what happens next. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com Music provided by The Wood Yogi: The Wood Yogi - Workshop Jig

 

Shoptime
By: Dry Creek Woodturning
January 01, 2019 · 46 views

Some time in the shop

 

Making Woodturning French Cleat Tool Holders
By: Pat Lap - Le PicBois
December 29, 2018 · 4,452 views

I recently made a storage wall with French cleats. Now It's time to build some woodturning tool holders to put on! : https://www.patreon.com/lepicbois : https://teespring.com/stores/lepicbois : https://www.youtube.com/jackmanworks ______________________________________ : http://lepicbois.net/ : https://www.youtube.com/lepicbois : https://www.facebook.com/AtelierLePicBois : http://instagram.com/atelierlepicbois

 

Sam's Shop Tour December 2018 Sam Angelo wyomingwoodturner
By: WYOMINGWOODTURNER
December 29, 2018 · 3,936 views

Sam tours his shop to show current work and projects he is working on at the end of 2018. He begins by showing another Beads of Courage container. The shop----What a mess! Time to clean..... Please find my work on the following sites wyomingwoodturner http://www.wyomingwoodturner.com Sam’s Artwork at samangelo.com http://www.samangelo.com/1/index.php/home/art-by-sam Ron Brown’s Tools and Accessories http://www.samangelo.com/1/index.php/home/tools-and-supplies ETSY https://www.etsy.com/shop/wyomingwoodturnercom

 

Shop Secrets and Tour
By: Phil Anderson - Shady Acres Woodshop
December 20, 2018 · 5,972 views

Just a really busy time here at Shady Acres so I thought I would do a quick shop tour and answer some viewer questions. I'll try really hard to do a turning video next week! Picture is of my shop. Shop Page: https://www.facebook.com/Phils-Woodshop-1470648929819551

 

Shop Update #9
By: Billy Burt
December 06, 2018 · 129 views

I've not done any project videos since the guitar because I've been busy doing other things. Hopefully I'll have a couple of turning videos out soon. I still have quite a bit of shop things to finish and this is taking time as well. Come back and see what happens next. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com Music provided by The Wood Yogi: The Wood Yogi - Workshop Jig

 

Workshop tour
By: Ian Robbo Robertson
November 29, 2018 · 416 views

In answer to some requests on what my workshop looks like.

 

birthday at the ranch with update on shop
By: Rons Woodturning shop
October 01, 2018 · 162 views

Short update on my new shop

 

Glyn's Workshop
By: Wayne the Woodturner
September 28, 2018 · 446 views

A quick tour of Yorkshire Grit HQ and Glyn's new lathe

 

Shop Update #8
By: Billy Burt
September 13, 2018 · 38 views

I put up some new stickers and show a litte more organization as well some new stuff I got on sale. As you may have seen, the shop is finally functional and I've begun completing projects again. Come back and see what happens next. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com Music provided by The Wood Yogi: The Wood Yogi - Workshop Jig

 

Shop update number 3
By: Rons Woodturning shop
August 20, 2018 · 184 views

Latest update on the shop build for retirement. Pardon the hiccups this is my first voice over. The copper looks fantastic and I may polish it one time and then let it age, maybe not. Still thinking about an epoxy river top for it and there is a place close that will slab out a tree for me. First thought is cedar because of the color will match close to the copper. and a turquois river down the middle.

 

Workshop Upgrade Part 2 - The bad sequel?
By: Fatso's Workshop
August 13, 2018 · 76 views

Finished up the majority of the workshop upgrades, still a few things to finish and tidy up but I'm looking forward to doing some things that aren't built for the workshop rather than in the workshop

 

The village woodturners workshop
By: The Village Woodturners
August 12, 2018 · 64 views

Wood turning

 

Shop Update #7
By: Billy Burt
August 02, 2018 · 56 views

Finally got everything moved over, but had some work to do on the old place to get it ready to sell. As a result of this and other life things, the shop still isn't ready for projects. But I should be getting back in the flow soon. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com

 

New LED Shop Lighting - How To
By: Lynn Lacey
July 16, 2018 · 882 views

In this weeks video I give a brief look at how I installed LED lighting in my new shop. Instagram @LL_Woodworks Web Site: www.LL-Woodworks.net Link to my Caps - http://ll-woodworks.net/store/apparel/ Amazon Affiliate Link : https://amzn.to/2lIrE62 In My Shop: https://www.amazon.com/shop/lynnlaceyllww Disclaimer: My videos represent how I go about my woodworking. They are for your entertainment and not instruction. My safety is MY responsibility and YOUR safety is YOUR responsibility. Before beginning any woodworking be familiar with your equipment and always - always wear the proper personal protective equipment. When performed safely, woodworking be fun and rewarding. Keep it fun by working safe.

 

Shop Update #6
By: Billy Burt
July 10, 2018 · 62 views

We got moved, but the shop still isn't ready for projects. Still quite a bit to do in the house and a few more things to move over. Plus we have to get the old place ready to sell. But this gives you an idea of whats going on. Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com

 

Sort of a workshop tour: doing some shed upgrades
By: Fatso's Workshop
July 08, 2018 · 181 views

Finally starting to try to do some workshop upgrades, lining the tin shed with some insulation and plywood, this will help make the temperature a bit more even and keep the noise down for the neighbours. I'm using the plywood so I can screw straight into it when fixing things to the wall, whether it's french cleats or other stuff. Music: A Stranger's Map of Texas by Michael Chapman & The Woodpiles is licensed under a Attribution-NonCommercial 3.0 International License.

 

ranch shop 2
By: Rons Woodturning shop
July 08, 2018 · 247 views

Just a short update on my shop progress

 

Workshop Update #18
By: John Clothier
June 19, 2018 · 580 views

In this workshop update I talk about a year in the new workshop, talk about some of the recent projects I have been working on and give a special mention to two new channels The Emporium https://www.facebook.com/nenecourtemporium/ House Of Resin https://www.youtube.com/channel/UC4HTXoGFztAdmbyE0zqLAng Chris Parker https://www.youtube.com/channel/UCUloWVMwU-J0jTDI4hGXktw John Clothier is proudly supported by Hampshire Sheen - for finishing products https://www.hampshiresheen.com/ House of Resin - for Resin http://houseofresin.co.uk/ Yorkshire Grit - for Abrasive Paste http://yorkshire-

 

Shop Update #5
By: Billy Burt
June 17, 2018 · 91 views

No more projects for a few weeks. Packing for the move and looking forward to getting into the new place/shop. Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com

 

Closet Shop Tour 2018
By: Pat Lap - Le PicBois
June 06, 2018 · 1,707 views

Obviously this video is a gag but it's just to show you that you can make something everywhere you want, even if you don't have that much space. Here's a proof: https://youtu.be/MuWGq0YgOD8 I put together a list of some of the tools I use in my shop in case you might be interested: https://www.amazon.com/shop/lepicbois _______________________________________________ Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicb

 

Welcome to my workshop ! Shop tour #1
By: Kostas Annikas Deftereos
June 02, 2018 · 1,527 views

Today i welcome you to my shop ! we do together a shop tour ! You have ask a lot of ties for something like this ! and i just found the time and a clean shop for making it lol !!! i hope you enjoy it !!

 

shop update 2
By: Rons Woodturning shop
May 30, 2018 · 262 views

Slowly coming along. Utilities next, then I can build stuff

 

Workshop Update #17
By: John Clothier
May 29, 2018 · 738 views

In this workshop update I talk a bit about new equipment in the workshop, my new lathe, new channel supporters and I finish a mini workshop tour. Vacuum Pump and Vacuum Chamber Overview video: https://www.youtube.com/watch?v 8_CgIRvn2JM&t 1s John Clothier is proudly supported by Hampshire Sheen - for finishing products https://www.hampshiresheen.com/ House of Resin - for Resin http://houseofresin.co.uk/ Yorkshire Grit - for Abrasive Paste http://yorkshire-grit.com/ Dont forget to visit my other social media: Website - https://www.johnclothier.co.uk Instagram - https://www.instagram.com/JohnClothierUK/ Facebook - https://www.facebook.com/JohnClothierUK/ Twitter - https://twitter.com/JohnClothierUK John Clothier is a proud member of Small Workshop YouTube Makers group on Facebook https://www.facebook.com/groups/109030066480071/ Makers Media Network http://makersmedianetwork.com/ The Association of Woodturners of Great Britain https://www.awgb.co.uk

 

My Shop 2018 # 133
By: The Wood Whirler
May 25, 2018 · 1,683 views

Several people have asked to see my shop, so here you go.

 

Shop Update #4
By: Billy Burt
May 19, 2018 · 51 views

It's been a crazy week and the next month or so looks to be the same. In this update I explain why and what's going on in the near future. Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com https://www.youtube.com/channel/UC2hWlsf15z-7-smBhGdZvNg/videos

 

Workshop Update #16
By: John Clothier
May 15, 2018 · 509 views

In this workshop update I talk a bit about Makers Central 2018 and show you some of the projects I have been working on. KK Make https://www.youtube.com/user/polishedwoodworking Pam Harris - Highland Boxes https://www.youtube.com/user/pamharris101 Dont forget to visit my other social media: ____________________________________ Website - https://www.johnclothier.co.uk Instagram - https://www.instagram.com/JohnClothierUK/ Facebook - https://www.facebook.com/JohnClothierUK/ Twitter - https://twitter.com/JohnClothierUK John Clothier is a proud member of ____________________________________ Small Workshop YouTube Makers group on Facebook https://www.facebook.com/groups/109030066480071/ Makers Media Network http://makersmedianetwork.com/ The Association of Woodturners of Great Britain https://www.awgb.co.uk

 

Behind the scenes of the workshop
By: The Riggs workshop
May 15, 2018 · 97 views

In this video i take a look at the restoration of my workshop tools and how and what i use to film .

 

My workshop
By: The Apartment Woodturner
March 28, 2018 · 90 views

Showing off my little apartment shop. Feel free to follow me on twitter https://twitter.com/jetgreensharpie?s 09 Also check out my Etsy www.etsy.com/shop/KelliePink

 

Rons Woodturning Shop update
By: Rons Woodturning shop
March 26, 2018 · 534 views

Went to the ranch to see my new shop. Everybody in my family has seen it but me so I was excited! Worked my tail off getting it sorted out but it is taking shape.

 

Shop Update #3
By: Billy Burt
March 26, 2018 · 37 views

After my last two project debacles I decided to take a short break and start some reorganizing of the studio that I've been putting off. One must have his or her priorities and making a few changes is necessary. Plus it will give me permanent access to two more pieces of equipment. Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com

 

H F Bowern Designs Workshop update March 2018
By: H F Bowern Designs - Harold Bowern
March 06, 2018 · 153 views

Welcome Back! Well it has been a while since I made any videos and I want to let you know what is going to happen in 2018 in the workshop. I hope to be back some sort of bi-weekly or weekly video release starting later this month or next. People I mention in this video. Please take some time and visit and subscribe to their channels if you have not done so already. Stabilizing/Casting: Pam Harris – Highland Boxes https://www.youtube.com/channel/UCkg4kARmfFOfrlWDGUHzHqQ Zac Higgins – NVWoodwerks https://www.youtube.com/channel/UCaiEQvv5CgXjk1qN7qevQUQ Heath Knuckles https://www.youtube.com

 

Cleaning Up
By: Roper Woodturning
February 02, 2018 · 11 views

When its time to clean up the shop, its time for a fire. Burning old turnings on a beautiful Colorado night.

 

Shop Update 2
By: Billy Burt
January 11, 2018 · 60 views

Just a quick update on things going on since my last update. The P&N lathe tools mentioned in the update can be found from a few US vendors including Packard Woodworks, Lee Valley and Timberbits. Packard seems to have the best prices. http://www.packardwoodworks.com/Merchant2/merchant.mvc?Screen CTGY&Store_Code packard&Category_Code tools-pn I got my Jimmy Clewes Mate from Tod Raines at the Woodturning Tool Store. https://woodturningtoolstore.com/product-category/turning-tools/handles-and-adapters

 

102 - Shop Tour 2018
By: Roweville Retro
January 10, 2018 · 311 views

A quick look around my shop. Enjoy! Music from http://www.gosoundtrack.com, under Creative Commons Attribution License: https://creativecommons.org/licenses/by/4.0

 

Shop Update
By: Billy Burt
December 21, 2017 · 40 views

Just a quick thank you and update with what I'll be up to through at least the end of January. Y'all have a very Merry Christmas and a safe and prosperous New Year!

 

#92 New Shop Update
By: Yuval Lahav Woodturning
December 18, 2017 · 2,121 views

And sometimes you just need a change. So you take it out on your shop!! When my wife told me they are throwing away some shelves and a table from a shop she was hired to design, I had to get in on the action!! Patreon: https://www.patreon.com/YuvalLahav Twitter: https://twitter.com/YL_Woodturning Instagram: https://www.instagram.com/yuval_lahav_woodturning/ Facebook: https://www.facebook.com/yuval.lahav.16 Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Reddit: https://www.reddit.com/user/aforeignitalian/ Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: TOMTURNS.COM, Michael L. Kent, Tina Minahan,

 

Shopisode Vlog Series #2 (Lighting A Shop)
By: Casey Martin
December 14, 2017 · 1,050 views

Let me know what you guys think and please leave any suggestions or questions down below! Tools I Use: https://winecountrywoodworks.com/tools-i-use/ The light bulbs: https://goo.gl/V1J3Jc Discount Code: LABALABA My pen blanks: https://www.etsy.com/shop/WineCountryWoodwork OR https://winecountrywoodworks.com/ My pens: https://www.winecountrypens.com My email for questions or business inquiries: casey@winecountrypens.com

 

Fatso's Workshop - Shop update
By: Fatso's Workshop
December 01, 2017 · 72 views

Just a quick update about what's happening or rather not happening in the workshop. It's finally the end of Movember so the mo goes, much the the delight of my wife. If you'd like to donate to the movember foundation: https://mobro.co/fatsosworkshop?mc 1

 

20171114_143405.mp4
By: Knottie_gurl Deanna Morris
November 27, 2017 · 32 views

My makeshift work space.

 

BCC Woodturning Workshop Class Winter/Spring 2018
By: Carl Ford
November 26, 2017 · 245 views

Carl Ford's Winter/Spring 2018 'Woodturning Workshop' Class at the Brookfield Craft Center. Instructor: Carl Ford - Studio Woodturner - www.carlford.us Level: All Skill Levels (Novice, Intermediate or Expert) Dates: Any 10 out of 12 Tuesdays between January 23 to April 10th, 2018 (Jan 23, 30, Feb 6, 13, 20, 27, Mar 6, 13, 20, 27, Apr 3, 10, 2018) Time: 9am - 3:30pm Tuition 700.00 ( 700 / 10 days 70 per day / 6 hrs per day 12 per hour, A really good deal! ) Location: At The Brookfield Craft Center in Brookfield CT (10 minutes north of Danbury CT) Sign Up At: www.brookfieldcraft.org -------------------------------------------------------------------- Try it before you buy! Check out Carl Ford's 'Brookfield Craft Center Woodturning Studio Tour 2017' video on YouTube.

 

Brookfield Craft Center Woodturning Studio Tour 2017
By: Carl Ford
November 25, 2017 · 281 views

A quick tour of the Brookfield Craft Center Woodturning Studio on November 15th, 2017

 

A quick trip around my little studio
By: Miss Tee's Woodturning
November 24, 2017 · 89 views

 

Happy Thanksgiving Day Shop Update
By: Lynn Lacey
November 23, 2017 · 725 views

Happy Thanksgiving Day Shop update and introduction to a new shop tool. Seyco Scroll Saw Dust Collection http://seyco.com/dv-10a-cyclonic-action-scroll-saw-dust-collector/ Instagram; @LL_woodworks www.LL-Woodworks.net Facebook Disclaimer: My videos represent how I go about my woodworking. They are for your entertainment and not instruction. My safety is MY responsibility and YOUR safety is YOUR responsibility. Before beginning any woodworking be familiar with your equipment and always - always wear the proper personal protective equipment. When performed safely, woodworking be fun and rewarding. Keep it fun by working safe.

 

RJBWoodturner Shop Announcement
By: RJBWoodTurner
November 18, 2017 · 5,897 views

 

Time in the shop
By: Dry Creek Woodturning
November 18, 2017 · 167 views

A time lapse in the shop

 

Shop Tour 2017
By: The Russian Woodworker
October 02, 2017 · 1,098 views

This video is a tour of my shop and of everything that I own right now, in October 2017. Enjoy the video!

 

Future shop
By: Rons Woodturning shop
September 22, 2017 · 101 views

Just a quick tour of my future shop will be and a lifetime supply of wood.

 

Wood Turning - Shop Facelift
By: Mike Waldt
August 10, 2017 · 7,683 views

Harrogate Show Website: http://www.skpromotions.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk/ Makers Central YouTube Channel: https://www.youtube.com/channel/UCJSr... Makers Central website: http://www.makerscentral.co.uk/ NZ Woodturning: https://www.youtube.com/channel/UC3-0... Kostas' YouTube Channel: https://www.youtube.com/user/annikas88 Paul Critchley: https://www.THEWOODKING.co.uk Greg Dykes: https://facebook.com/createdbygregdykes Fosters Wood Crafts: Facebook - Oliver Foster

 

August 2017 Update
By: Austringer Creations
July 27, 2017 · 124 views

An update video, outlining my goals for the shop in August, 2017. More changes to the shop: a new workbench, a kiln for drying turning blanks, a pen give away drawing, part 3 of the guitar build and BOWLS! Stephen Ogle's YouTube channel - https://www.youtube.com/user/stvnogle

 

Shop Update #5
By: Peter Stewart
July 25, 2017 · 1,122 views

Hi everyone! I know its been quite a while since my last video and I don't have any project videos ready right now, so I figured I would share with you guys my current projects and a few other things going on. Thanks for sticking with me and my channel and I hope to see you next time! EMAIL FOR BUSINESS INQUIRIES OR QUESITONS: peterturnswood@gmail.com AWESOME WOODTURNING PLAYLISTS https://www.youtube.com/playlist?list PLE2bcZVXSO84px9YMPMvQhkK_KezJUcWR https://www.youtube.com/playlist?list PLE2bcZVXSO84v4QYhuPqfAFvnP6hPvZXc

 

Behind the scenes !
By: Kostas Annikas Deftereos
July 20, 2017 · 761 views

As i work my friend Elias pass by my workshop find me and Spiros working on the table lamp from the last weeks video ! today bring me this video for editing ! so here it is a crazy day working with friends !! you can find Elias on the links bellow !: https://www.instagram.com/ili_kal/ you can find me also ! facebook : https://www.facebook.com/annikas8 instagram : https://www.instagram.com/kostas_annikas_deftereos/ google : https://plus.google.com/u/0/ KostasAnnikasDeftereos the music is an offer waylightcreations you can go to their page and download music for free : http://waylightcreations.com or you can see their creations on youtube : https://www.youtube.com/channel/UC38CQXaEkI4k_sQCIZOJJ0Q

 

Wood Turning Workshop Tour
By: Bostin Bowls
July 16, 2017 · 345 views

A quick look at the tools being used. Biven Machinery and Tooling www.bivenmachinerysales.co.uk

 

New Workshop Build - Part 3: Workshop Tour
By: John Clothier
July 11, 2017 · 9,039 views

In this final video in the new workshop build series I wrap things up with a workshop tour. Highlighting the key areas within the (Still small) workshop.

 

New Workshop - Part 2: The Build
By: John Clothier
May 27, 2017 · 26,761 views

Part 2 of a series on my new workshop build. In this video we build the workshop.

 

Woodshop Tour 11 DIY Carbide Tools for Woodturning
By: Dipa Das
May 26, 2017 · 14,052 views

 

New Workshop - Part 1: The Base
By: John Clothier
May 11, 2017 · 33,557 views

Part 1 of a series on my new workshop build. In this video we cleared the garden and got it ready and the concrete base laid.

 

Shop Update #4
By: Peter Stewart
May 01, 2017 · 557 views

THANKS FOR WATCHING! :) Please subscribe and check out my other videos! -Peter

 

New Shop Update Number 2
By: Turning Round
April 21, 2017 · 261 views

This is a second look at my new Wood Shop space. I spend some energy putting up a nice big tarp to help keep the wood shaving and saw dust out of the cars. This is one of many videos about the shop space as I get it put together. Take a look around and help me figure out how to make this space happen. I am now on Patreon like all the other cool kids. If you think this is cool and want to help out. https://www.patreon.com/TurningRound Otherwise check out my Etsy Store. https://www.etsy.com/shop/TurningRound?ref hdr_shop_menu

 

2 Guys, 2 Shops – Part 1 of 3: Tools
By: Mike Peace Woodturning
April 14, 2017 · 3,044 views

Two experienced woodturners, Mike Peace and Rick Morris, collaborate in this video series about setting up a woodturning shop. They discuss many key considerations of shop setup with part one focusing on common and essential tools, part 2 deals with storage and part 3 dealing with electrical power and lighting. They show specific examples from both of their shops to illustrate their points. Click here to watch Part 2 on Rick’s channel, RickTurns: https://youtu.be/5_cdV2X0Ry4M Click here to watch Part 3 on Mike’s channel: https://youtu.be/pJc7013hiOY You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

2 Guys, 2 Shops - Pt 3 of 3: Electrical and Lighting
By: Mike Peace Woodturning
April 14, 2017 · 2,145 views

Two experienced woodturners, Mike Peace and Rick Morris, collaborate in this video series about setting up a woodturning shop. They discuss many key considerations of shop setup with part one focusing on common and essential tools, part 2 deals with storage and part 3 dealing with electrical power and lighting. They show specific examples from both of their shops to illustrate their points. Click here to watch Part 1 on Mike’s channel: https://youtu.be/JSsijh724rk Click here to watch Part 2 on Rick’s channel, RickTurns; https://youtu.be/5_cdV2X0Ry4M You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Tour of workshop ( Shed )
By: AJY Wooden-Stuff
April 14, 2017 · 114 views

It doesn't need to be big to work for you .......

 

Physical limits turning
By: Lyle Jamieson
April 13, 2017 · 3,188 views

I have helped many disabled vets and others with physical challenges continue to enjoy turning. This shows my process of turning from a seated position with one hand. I have booked some live demonstrations around the country and Europe from my shop, with my tools, my cameras. If you are interested give me a call. 231-947-2348 lylejamieson.com Welcome to my channel. I have been turning all my life and want to share the techniques I discovered over the years. The first 40 videos on my channel were technique oriented showing different parts of the process. Lately, I have been doing project ori

 

Two Guys, Two Shops - Part 2: Storage in the Workshop
By: RickTurns
April 12, 2017 · 2,777 views

This video is the second of a three part series about woodturning shops: tools, storage, power and lighting. Mike Peace and Rick Morris, two woodturners in Georgia, discuss how their woodturning shops are both different and similar. Part 1 of this series discusses tools and tool placement in the shop. Part 2, this video, discusses various storage options in the workshop. Part 3 of this series discusses power and lighting in the workshop. Click here to watch Part 1 on Mike’s channel, Mike Peace Woodturning: https://youtu.be/JSsijh724rk Click here to watch Part 3 on Mike’s channel: https://youtu.be/pJc7013hiOY

 

Improved Shop Lighting
By: Gord Rock
April 08, 2017 · 1,269 views

A very quick look at improving your shop lighting if you have fluorescent lights.

 

Shop Update #3
By: Peter Stewart
March 15, 2017 · 653 views

This is the third shop update! Thanks for liking, commenting, and subscribing :) STICKER SWAP with your address peterturnswood@gmail.com Send mail here Peter Matthew 1580 S. Commerce Rd, Walled Lake, MI 48390 Check out my WEBSITE http://www.peterturnswood.com EBAY STORE http://www.ebay.com/usr/dste6080 MUSIC CREDS Brock Berrigan: https://soundcloud.com/brockberrigan http://www.brockberrigan.com EMAIL FOR BUSINESS INQUIRIES OR QUESITONS: peterturnswood@gmail.com AWESOME

 

My New Shop! (Full Tour)
By: Casey Martin
February 26, 2017 · 15,997 views

In this video I show everyone my new shop in my two car garage. I was previously in my basement and this is a huge upgrade and improvement for me. Let me know what you think! Tools I Use: https://winecountrywoodworks.com/tools-i-use/ My websites: winecountrypens.com winecountrywoodworks.com My email: casey@winecountrypens.com

 

Wood shop tour 2017
By: Kuffys Woodwork
February 26, 2017 · 2,847 views

Come and take a look around my woodworking woodshop to see where all of the magic and possibly trauma occurs :D Thanks for watching. Be sure to subscribe to my channel for more awesome woodworking videos. #woodwork #woodworker #woodworking #woodturning https://www.instagram.com/kuffyswoodwork/ https://www.facebook.com/kuffyswoodwork/ https://twitter.com/kuffyswoodwork - - - - - - Check out one of my best videos: 'Wooden Jewellery Box' https://www.youtube.com/watch?v Mp3soxzdmis Remember to subscribe to keep up to date with my latest and greatest builds. Thanks - - - - - -

 

MY NEW WOODTURNING WORKSHOP! & GIVEAWAY RESULTS!
By: Nick Zammeti
February 15, 2017 · 9,988 views

Here is the build of my new Woodturning Workshop. Also I announce the 2 winners. Richwood Oak (Workshop Builders) http://www.richwoodoak.co.uk/ Music By https://soundcloud.com/officialjupe/tracks MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ ………………………………………………………………………………………………………………………………………………………. PLEASE NOTE: IF YOU ARE SENDING ME A GIFT, PLEASE COULD YOU PLACE A LOW VALUE ON THE PACKAGE YOU ARE SENDING. THANK YOU. ………………………………………………………………………………………………………………………………………………………. SEND ME STUFF FAO NICK NZ WOODT

 

#170 Shop update, air hooses and more
By: Miguel Sanchez
January 06, 2017 · 3,051 views

Este video tambien esta en Español sigue el enlace mas abajo. This video is also in English, click the link below. https://www.youtube.com/channel/UCyOE_zdEBv4UcK5a_a3Z6hA Hablemos de torneado / Lets talk about woodturning: https://www.youtube.com/channel/UC2JiORNXY4uz2wg3hL1oLHA Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez http://www.tornoartesano.es mailto:miguel@tornoartesano.es

 

#170 Actualizacion del taller, mangueras de aire
By: Miguel Sanchez
January 06, 2017 · 8,316 views

Este video tambien esta en Español sigue el enlace mas abajo. This video is also in English, click the link below. https://www.youtube.com/channel/UCyOE_zdEBv4UcK5a_a3Z6hA Hablemos de torneado / Lets talk about woodturning: https://www.youtube.com/channel/UC2JiORNXY4uz2wg3hL1oLHA Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez http://www.tornoartesano.es mailto:miguel@tornoartesano.es

 

a quick look in the shop
By: Bram the Wadesmill woodturner
January 02, 2017 · 691 views

The 'Gord Rock' safe cutting jig for a band saw. a small stock jig for table saw and a bit or roughing out a natural edged bowl. Gords channel https://www.youtube.com/user/GordRocks1 Music . Bensound royalty free music. 'Trees to stone'

 

Wood Turning - Black Dog Workshop Visit (Time lapse)
By: Mike Waldt
December 08, 2016 · 5,470 views

I visited Martin Saban-Smith at his Black Dog Workshop, thanks Martin for a wonderful day...must get together again soon :) Martins Video (real time): https://www.youtube.com/watch?v T0J0d4KYU6c UKIWS: http://www.ukiws.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk

 

Le PicBois - Making In Small Spaces
By: Pat Lap - Le PicBois
November 11, 2016 · 1,780 views

[ How to make something when you have no space? JUST DO IT!!! ] Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois ///////////////////////////////////////////////////////// Thanks to ALL my supporters on Patreon: Luis Gonzales, Ento Hamelin, Carl Jacobson, Olivier Coursol, Elaine Go, Brandon C., Corey Neuman, Tony Dew, Benoit Pelletier, Make Something, Get Hands Dirty, Jamie Page, Jackman Works, Scott Haun, Francis LaBrie, Alain Lebarbé & Jayson Nuckolls. You really make a difference! Thank you so much! ///////////////////////////////////////////////////////// I work for free and I pay my director with cookies… Please help me to buy some flour by clicking on the link below: https://www.paypal.me/lepicbois

 

Wood Turning - New Series, Lights and a Fix!
By: Mike Waldt
November 04, 2016 · 6,750 views

I'm starting a new seies on Eccentric Goblets, a great light I've found, and a fix for a problem I had with my Wolverine Jig UKIWS - http://www.ukiws.co.uk/ The Black Dog Workshop - http://www.blackdogworkshop.co.uk/ Hampshire Sheen - http://www.hampshiresheen.com/ Yorkshire Grit - http://yorkshire-grit.com

 

LatheCraft workshop v01
By: William Hunt
November 03, 2016 · 195 views

The development of my new workshop in three minutes.

 

New Workshop Enhancements
By: RickTurns
September 29, 2016 · 21,050 views

Here are some very useful items to enhance a woodturning workshop. And here are links to various things mentioned in the video: WallPeg Peg Hook Kit http://amzn.to/2dyZsRL DuraHook Pegboard Hook, 10-pack http://amzn.to/2cFbubC Automatic Motion-sensing Light Switch http://amzn.to/2doVOJ7 Downtoearthwoodworks - Better Hardware Storage video http://bit.ly/2cFc0pK Quantum Tip Out Bin System http://amzn.to/2dbvd49 Perfect Tear Wall Mount Paper Towel Holder http://amzn.to/2df7Lie

 

Woodturners Journal: The New Shop
By: Woodturners Journal
July 26, 2016 · 1,837 views

Jerrod explains where he has been for the past 2 months and a little of what to expect in the future.

 

Shop Update July 15
By: Custom Chris
July 15, 2016 · 1,633 views

http://yorkshire-grit.com/ Shogun Jimi https://www.youtube.com/user/shogun21jimi Merzke Custom woodworking https://www.youtube.com/user/MerzkeCustom Rob's Workshop https://www.youtube.com/channel/UCaozoIoGs6fKrElnwXHicPA TabLeft Workshop https://www.youtube.com/user/TabLeft Fabian's Tiny Workshop https://www.youtube.com/user/swingguitar1950 (music) By Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

shop update two
By: Bram the Wadesmill woodturner
July 08, 2016 · 377 views

At last, apart from a tweak or two here and there my workshop is now ready .Any one that has seen my earlier videos would have noticed the clutter in there with garden tools ,beekeeping bits and bobs and sometimes even a rotavator, now all those things have a shed of their own . Gord rocks channel https://www.youtube.com/c/gordonrock1

 

Around The Shop - Episode 2 - Some of my Tools
By: RJBWoodTurner
July 04, 2016 · 2,346 views

Whenever I use these tools in one of my videos, I always get questions about them. I wanted to take a few minutes and go over the tools to give you as much information about them as I can. If you have any questions, please leave them in the comments and I'll answer them. Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

A new start! In the workshop. Talking about UKIWS.
By: Blind Woodturner
July 03, 2016 · 1,109 views

Chris talks about the new workshop and a great couple of days at UKIWS.

 

Shop Loft Build - How to Increase the Storage Space in Your Shop
By: RJBWoodTurner
June 22, 2016 · 90,142 views

The ceilings in my shop are 12 foot high, and that's a lot of wasted space. I decided to add a loft above the work area for storage and to house my dust collector and compressor. I was able to build a space roughly 8' by 12' with a ladder for easy access. This video chronicles that build. Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Lathe Chisel Pull Out
By: Phil Anderson - Shady Acres Woodshop
June 14, 2016 · 709 views

Very short video showing my storage idea for lathe chisels.

 

My Workshop, Machines & Tools I Use.
By: Nick Zammeti
May 04, 2016 · 15,806 views

I thought I would put together a short video of some of the equipment I use and some links to where to where I purchased these items. I hope its of some use to a few of my viewers and helps it some way. I don't have a great deal of knowledge of these items and I would recommend seeking professional advise before purchasing anything for your workshop. I had this advise before I purchased all of these items from John Davis a professional wood turner for many years. All the best http://johndaviswoodturning.com/ http://www.recordpower.co.uk/ https://www.oliverswoodturning.co.uk

 

Woodturning with a low budget and a walk through my story of lathes.
By: Woodturning Live With Steve Twydell
April 03, 2016 · 6,282 views

In this episode I take you on a walk through my journey so far as a wood turner. I show you the lathes I have used on the way, including my homemade drill lathe right up to my brand new pro lathe. I also show that you don't need a huge budget to wood turn. Mike Waldt woodturning channel https://www.youtube.com/user/TheCymruBoy Carl Jackobson woodturning channel https://www.youtube.com/user/haydenHD Sam Angelo (Wyoming wood turner) channel https://www.youtube.com/user/WYOMINGWOODTURNER Al Furtado Wood turning channel https://www.youtube.com/user/Alfurtado1 Robbie the woodturner channel htt

 

2016 Shop Tour - As the Wood Turned
By: As The Wood Turned
March 24, 2016 · 1,552 views

Description

 

workshop update
By: Bram the Wadesmill woodturner
February 21, 2016 · 498 views

Cattails - Thatched Villagers by Kevin MacLeod is licensed under a Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100743 Artist: http://incompetech.com

 

RJBWoodturner Shop Update 1
By: RJBWoodTurner
January 03, 2016 · 2,512 views

This is a short update on what's going on in my new shop. My first update may not be all that exciting but its a start on my new working shop and I'm excited at the prospect of having a shop to work in again. Regards, Bob

 

Shop seat top rebuild
By: Rich McNatt
October 29, 2015 · 297 views

 

New Workshop and Lathe Station Tour
By: Martin's Bazaar
October 16, 2014 · 1,799 views

Having moved workshops recently, I thought I would share my humble workplace with you. It is quite small and fairly basic, but it does the job and as money and time allows, it will get better. Thanks for watching. Do you like what you see? Some of the items you may have seen being made in this video could be available for purchase on my website at http://www.martinsbazaar.co.uk. Check out the blog too...there might be something of interest there...Also, get exclusive hand made items at my Etsy shop: http://www.etsy.com/shop/martinsbazaar Keep up with what goes on in the workshop by follow

 

ShopTour
By: Rick Hutcheson
April 06, 2014 · 150 views

Just a short video of the turning part of my shop.

 

My Workshop
By: Benjamin Kovach
November 24, 2013 · 62 views

Starting a u tube station dedicated to woodturning

 

The New Workshop
By: Bill Thomas
October 23, 2013 · 350 views

My new workshop, No more cramped conditions

 

OZWorkshop tour
By: OzWorkshop
November 23, 2012 · 955 views

Just thought I would show you my surroundings and where I create my brand of mayhem.

 

Lyle on Woodturning Workspace
By: Lyle Jamieson
October 03, 2012 · 14,597 views

Lyle Jamieson stresses efficiency in workspace. He shows lathe set up and tool storage.

 

WOODWORKING SHOP TOUR
By: WYOMINGWOODTURNER
July 10, 2012 · 69,701 views

Sam takes you on a tour of his woodworking and woodturning shop. He shows you around his well-equipped 1650 square foot shop, as well as a proper floor plan and how wood should 'flow' from the first cut to the finished project.

 

Lighting your shop
By: woodturningwithtim1
July 16, 2011 · 5,080 views

While trying to make the perfect turning, perfect lighting can be a turner's worst friend.

 

Woodshop Tour
By: onewaytoturn
January 20, 2009 · 95,676 views

My Woodshop

 

Return to Turning Videos

Great Bargains
(ends November 27, 2019)


Customized Electric Branding Iron

On Sale for only $99.99

Save $20.00

List price: $119.99

This customized, 110V electric branding iron will let you imprint your woodturnings in way that will never fade away. You will be able to order from fifteen different standard-size design choices, enter your custom text and proof the final design. The delivery of your custom burning head will take 2 - 3 weeks.

Click here for more information or to purchase

 


Rockler Mini Carbide Pen Turning Tools

On Sale for only $149.99

Save $70.00

List Price: $219.99

This three piece set has comfortable rubber handles which provide excellent control and reduce fatigue—replaceable carbide tips require no sharpening. The 3-piece sets comes with diamond, square and round carbide tipped tools.

Click here for more information or to purchase

 


Bar Tool Turning Kits

Get the 5 Piece Set for only $68.95

Save $15.00

Everything you need to turn out cocktails that friends will rave about—includes all five of their Bar Tool Turning Kits in one cost-saving package. Includes: bottle opener, double jigger, muddler bar, bar spoon, cocktail strainer and 5 threaded inserts.

Click here for more information or to purchase


Pen Press/Drilling Jig

For only $89.99

Save $10.00

List Price: $99.99

Drill and assemble your pens perfectly with flush fittings and a smoothly-operating mechanism! This dual-purpose jig takes care of both prep work and assembly. It holds your blank firmly in position for drilling, creating a precise, perfectly centered hole the entire length of the pen. Later, it smoothly presses your parts together without any bowing or misalignment. Notched jaws automatically center the blank for drilling, while two countersunk holes center the parts during assembly. Large clamping wheel provides slow, controlled pressure so you'll never crack a casing again.

Click here for more information or to purchase


Trend® Air Circulating Airshield Pro

For only $369.99

Save $30.00

List Price: $399.99

Protect your lungs, face and eyes during virtually any woodworking task with the air-circulating Trend® Airshield Pro. Its built-in fan circulates filtered air to prevent fogging, provide cooling and protect users from dust particulates down to 0.6 microns in size at a 98% efficiency rate. This model also meets ANSI Z87+ standards for eye-protection. It features an improved headband with a ratchet suspension and pivoting nape back strap for enhanced comfort, fit and durability. The nickel metal hydride battery allows for up to eight hours of operation on a full charge, twice the length of previous models. Includes a charger, airflow indicator and pre-installed plastic film overlay to prevent buildup of sap after heavy turning jobs, and to prevent scratching.

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Saburrtooth
Woodpeckers
Hunter Woodturning Tools

(Click any Ad to go to our Sponsor's Website)