Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Wood Videos (142)

Sort by

Or click here to: Search All Videos


how to spalt wood part 3 of 3 ·
By: Woodslee Summercraft
November 16, 2017 · 996 views

here is part 3 of 3, although spalting is minimal it is happening, the wood is all still solid and not rotten, some didnt spalt. i am continuing the process with some of it, and some i will start to dry. Part 1 of this series https://youtu.be/laEmgBRvJ0o Part 2 of this series https://youtu.be/Co8lvPR_Yik please check out Seri Robinson on facebook here https://www.facebook.com/profile.php?id 100009652922107 she knows all about spalting and her book is available on Amazon.ca here https://www.amazon.ca/Spalted-Wood-History-Science-Material/dp/0764350382/ref sr_1_1?ie UTF8&qid 1510876406&sr 8-1&keywords spalted wood&dpID 51amx4huU8L&preST _SX258_BO1,204,203,200_QL70_&dpSrc srch

 

Exotic Hardwoods- Visiting Rare Woods USA (Maine) ·
By: 207 Made
November 13, 2017 · 41 views

207made on Instagram and facebook

 

Amazing wood find by Al Furtado ·
By: Rebel Turner
November 12, 2017 · 10,564 views

I found this amazing piece of Oak on the side of the road. It literally had grown around a cut limb creating and amazing effect. Please Like, comment and share,

 

oak crotch adventure ·
By: Rons Woodturning shop
November 09, 2017 · 495 views

You almost never know what wood will reveal. This one kept me changing my plans until the end!

 

Beauty in there... Just find it ·
By: Colin Laughton
October 28, 2017 · 6 views

 

Haul of Fresh Cherry and Elm with Massive Elm Burl ·
By: Nathan Cumming
August 29, 2017 · 826 views

In this quick video I'll show you the haul of freshly cut Elm that I was able to acquire. Not only was I able to save a large amount of sizeable pieces of Elm from being firewood, I was also able to rescue an enormous burl that had grown around almost the entire trunk of the tree! Any comments as far as sealing the large burl would be greatly appreciated as I don't want it to crack while drying like my last pieces of Elm burl did. At this point i don't know if i should mill it into smaller pieces now to seal or seal as it. Please leave me a comment with your thoughts. I also show some piece

 

woodworking # 79 how to spalt wood 2, part 2 of 3 ·
By: Woodslee Summercraft
August 13, 2017 · 2,366 views

This is my second attempt at spalting wood blanks, go big or go home, maple, oak, red oak, hack berry and poplar. this video is part 2 of 3 of the process i shall use to hopefully create stunning zone lines and colours through spalting in a somewhat controlled enviroment. my contacts for spalting on facebook Steve Crawford https://www.facebook.com/groups/CrawfordStudio/ Seri Robinson https://www.facebook.com/profile.php?id 100009652922107 music from youtube Brandenburg Concerto No4-1 BWV1049 - Classical Whimsical by Kevin MacLeod is licensed under a Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100303 Artist: http://incompetech.com/ I am no expert as this is my second attempt. wish me luck i love spalted wood.. dont you?

 

woodworking # 77 how to spalt wood 2, part 1 of 3 ·
By: Woodslee Summercraft
August 12, 2017 · 2,713 views

This is my second attempt at spalting wood blanks, go big or go home, maple oak,red oak, hack berry and poplar. this video is part 1 of 3 of the process i shall use to hopefully create stunning zone lines and colours though spalting in a somewhat controlled environment my contacts for spalting are on facebook Steve Crawford https://www.facebook.com/groups/CrawfordStudio/ Seri Robinson https://www.facebook.com/profile.php?id 100009652922107 please visit my website http://www.woodsleesummercraft.ca

 

Crepe Myrtle for Woodturning? ·
By: Mike Peace Woodturning
August 11, 2017 · 6,690 views

I turn a crotch blank of crepe myrtle into a small bowl on my wood lathe. I have never woodturned crepe myrtle which may be considered a shrub and is popular in the South. I upload a new wood turning tip every Wednesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Baumfällung- Baumsteigen , Treeclimbing- Treecutting DIY ·
By: Woodturning F-Z
August 04, 2017 · 652 views

Heute möchte ich euch zeigen woher ich mein Holz zum drechseln bekomme darum habe ich dieses mal die Kamera mit genommen. zum Baumschneiden. war aber nur Brennholz viel zu viele Äste Twoday i wanna show you from where my wood comes for woodturning and so i show you how i work by treeclimbing

 

Seri Robinson - Everything you need to know about fungi and spalting ·
By: nwfiguredwoods
July 27, 2017 · 358 views

Seri Robinson's talk - 07/08/17 For more information visit Seri's website: http://www.northernspalting.com

 

EZ Log Loader for Woodturners ·
By: Mike Peace Woodturning
June 23, 2017 · 2,962 views

I demonstrate how to make and use an EZ log loader to make it possible for one person to easily load heavy logs into their truck or SUV by using a little leverage. This makes it childs play for a woodturner to load a heavy log alone as they prepare wood for woodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

#131 My review of Spectraply ·
By: Stephen Ogle
June 07, 2017 · 4,225 views

After being given a few blanks of Spectraply from Cousineau Wood Product I wanted to do a video review of this product to introduce my viewers to an alternate turning material I thought they would like. Spectraply can be purchased directly from Cousineau Wood Products also from Woodcraft and Rockler. Here are some links to help you find it. Cousineau Wood Products: http://www.cwp-usa.com/ Don't forget the discount code (Ogle10) for a 10% discount. Woodcraft: https://www.woodcraft.com/search?q spectraply wood blanks Rockler: https://www.rockler.com/search/go?w spectraply&asug &sli_uuid &sli_sid

 

34 - A Different Look At Wood: Giant Sequoias ·
By: Bill Rockwood
May 30, 2017 · 240 views

A short video on my visit to see some of the largest, most beautiful trees in the world - the Giant Sequoias of Kings Canyon National Park

 

Log holder for Milling Wood with a Chainsaw Sam Angelo, wyomingwoodturner ·
By: WYOMINGWOODTURNER
April 20, 2017 · 4,164 views

Because of many questions and requests to see my log holder and how I made it, I made this short video showing how it was put together. This is not a 'how to' video that shows how to make this log holder. Operating a chainsaw can be dangerous and may require the operator to take lessons from an experienced person. If you are NOT sure about using a chainsaw DON'T.

 

Wood Grain? Who Cares? ·
By: Mike Peace Woodturning
March 17, 2017 · 4,505 views

Why Woodturners Care About Wood Grain. I explain the basics of wood grain and why it is important in woodturning. Wood Grain affects: 1. choice of wood 2. our choice of tool, 3. our cutting techniques, 4. our finishing techniques 5. and more. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Aging Wood Pt2 ·
By: Woodcraft of Spokane
February 22, 2017 · 160 views

Part 2, Have you ever needed some old or reclaimed barn wood for a special project but couldn't find it? Or if you did find it, didn't want to pay the exorbitant price for it? Well, let us show you how easy it can be to create your own 'aged' barn wood lumber in this sure to be interesting demonstration.

 

Aging Wood ·
By: Woodcraft of Spokane
February 21, 2017 · 226 views

Have you ever needed some old or reclaimed barn wood for a special project but couldn't find it? Or if you did find it, didn't want to pay the exorbitant price for it? Well, let us show you how easy it can be to create your own 'aged' barn wood lumber in this sure to be interesting demonstration.

 

Maintaining Wood Colors & Answering a Question ·
By: Gord Rock
February 15, 2017 · 1,697 views

A possible way to maintain the color of Padauk & Purpleheart after exposure to sunlight. Also, answering a subscriber's question.

 

wood species - Choosing the right wood for your woodturning project - Part 1 ·
By: DentonTurners
February 07, 2017 · 921 views

George Freeman has been owner of Creative Concepts in Landscaping in Dallas for several years, which was a complete landscape/irrigation/stone laying business. He also had a companion nursery growing operation for trees and shrubs in East Texas at the same time. George spends a lot of the time in the woods gathering trees for the saw mill and logs to turn into turning blanks. This is a very in depth look into 47 local Texas woods we use for turning. With an emphasize on the wood choices you have and the way you make your selection of wood for your next bowl, vase or other turned object. This was recorded September 2016 at the monthly club meeting of the Golden Triangle Woodturners in Denton, Texas. Club website: http://www.goldentrianglewoodturners.org

 

wood species - Choosing the right wood for your woodturning project - Part 3 ·
By: DentonTurners
February 07, 2017 · 334 views

George Freeman has been owner of Creative Concepts in Landscaping in Dallas for several years, which was a complete landscape/irrigation/stone laying business. He also had a companion nursery growing operation for trees and shrubs in East Texas at the same time. George spends a lot of the time in the woods gathering trees for the saw mill and logs to turn into turning blanks. This is a very in depth look into 47 local Texas woods we use for turning. With an emphasize on the wood choices you have and the way you make your selection of wood for your next bowl, vase or other turned object. This was recorded September 2016 at the monthly club meeting of the Golden Triangle Woodturners in Denton, Texas. Club website: http://www.goldentrianglewoodturners.org

 

wood species - Choosing the right wood for your woodturning project - Part 2 ·
By: DentonTurners
February 07, 2017 · 548 views

George Freeman has been owner of Creative Concepts in Landscaping in Dallas for several years, which was a complete landscape/irrigation/stone laying business. He also had a companion nursery growing operation for trees and shrubs in East Texas at the same time. George spends a lot of the time in the woods gathering trees for the saw mill and logs to turn into turning blanks. This is a very in depth look into 47 local Texas woods we use for turning. With an emphasize on the wood choices you have and the way you make your selection of wood for your next bowl, vase or other turned object. This was recorded September 2016 at the monthly club meeting of the Golden Triangle Woodturners in Denton, Texas. Club website: http://www.goldentrianglewoodturners.org

 

Milling Maple Blanks ·
By: Jerry Paul
February 05, 2017 · 1,561 views

WARNING! This is just me showing how I do this... It is NOT an 'instructional' video. My tools are limited, and I use what I have at hand.

 

Poplar Burl ·
By: SCCFORUM
February 05, 2017 · 252 views

Stabilised a piece of Poplar burl and wanted to see what is hiding below the surface of this fantastic piece of wood.

 

Wood & Resin test piece ·
By: SCCFORUM
February 04, 2017 · 158 views

This is a few small pieces of stabilised wood in Amazing clear resin. I am very happy with the results. The Burl wood can be very fragile towards the end of the pen tube, but with it being stabilised it makes the wood very tough.

 

Blow water out of wood pores ·
By: Lyle Jamieson
January 31, 2017 · 1,345 views

Another Tuesday tip video. See the 'maple syrup' in the wood. I always use wet wood. My business Facebook page https://www.facebook.com/lylejamieson46 is the place to go for your questions. I always have an opinion.

 

Holzvorbereitung für Drechseln | Preparing Wood for Turning | Projekt 8 ·
By: Andreas Achleitner
December 16, 2016 · 3,750 views

In diesem Video bereite ich Holz zur Lagerung vor. Ich verwende einen normalen Holzleim um die Rissbildung damit zu stoppen. Man kann es auch mit Wachs oder Lack machen. Es gibt aber auch spezielle Mittel dafür. Am Günstigsten ist immer noch der gute alte Holzleim. Der ist auch in jeder Werkstatt verfügbar. Es ist aber auch keine Garantie, das sich nicht doch noch Risse bilden können. Aber das hilft schon viel. Mein Name ist Andreas Achleitner und ich arbeite sehr gerne mit Holz. Wöchentlich gibt es auf meinem Kanal mindestens ein neues Video. Die Themenbereiche umfassen von der Theorie bis z

 

Cracked Oak ·
By: Rich McNatt
December 15, 2016 · 2,343 views

This chunk of Oak was just steps away from being dust but it had a cool look and I just had to try and turn it, nothing a little epoxy, ca glue and some Wood hardener could not fix. about 8'w X 5' t http://etsy.com/shop/woodworksbyrich

 

First specimens for turning ·
By: R4X Woodturning
November 12, 2016 · 47 views

Choosing the right word is very important when you are turning. This would was purchased at Woodcraft and was extremely inexpensive so if they get messed up it's no big deal , but if they turn out nice they're going to look spectacular because it's really good looking wood.

 

Update On Roughed Yew Blanks 2016 ·
By: BMac Woodturning
November 01, 2016 · 700 views

This is an update on some wet Yew branch wood I roughed into cylinders a couple of years ago.

 

Milling A Log Into Spindle Blanks ·
By: 207 Made
October 29, 2016 · 106 views

https://www.facebook.com/207-Made-112917125483794

 

Don't Throw Those Cedar Shavings Away ·
By: RJBWoodTurner
October 20, 2016 · 2,636 views

Don't throw those cedar shavings away. Pick up some Organza bags and make aromatic Cedar bags for closets and cloths drawers. Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Bradford Pear - Who Knew? ·
By: Mike Peace Woodturning
October 01, 2016 · 5,058 views

I explain a bit about the Bradford Pear tree and illustrate with my woodturnings why it is one of my favorite woods to turn on the lathe. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

The Maple Saga...Part 1 ·
By: Peter Matthew
September 26, 2016 · 745 views

A friend gave me a section of a Maple tree. Over the course of three videos, I'll be showing how I took this log and made it into stuff...yeah. My website: http://www.peterturnswood.com ----------------------------------------------------------------------------------------------- To see my vlog and follow-up channel, go to my main channel by clicking 'Peter Matthew' up above. On my main channel, look to the right side of the screen where it says 'Featured Channels'. Under 'Featured Channels' is 'Peter Matthew 2'. Click that and subscribe to that channel :) ----------------------------------------­­­­­­­­­­­­­­­­­------------------------­-­-­-­-­-­-­-­-­-­-­-­-­-­-­- Want to do a sticker swap? Send me an email: peterturnswood@gmail.com Want to send me stuff? Mailing address: Peter Matthew 6388 East Executive Drive Westland, MI 48185 Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080 Subscribe to my YouTube Channel! I post videos every Friday!

 

Drying wet bowls with a wood sealer ·
By: Tommy Akridge Designs
September 16, 2016 · 2,855 views

This video is about drying wet bowls with a wood sealer. My name is Tommy Akridge, I am a small town wood turner working on wooden bowls, segmented bowls and vases. some of my work could be considered art and also consist of Urns, vases and boxes. I have been turning for just a few years and I have found that I love it. I get lost in my work and that helps me cope with my the day to day work life. Showing my work on YOUTUBE has changed the way I turn, I enjoy showing others what i'm doing and maybe them be better turners. Thank You For Watching Tommy

 

Dealing with Mold in Wooden Bowls: woodturning with Sam Angelo ·
By: WYOMINGWOODTURNER
August 18, 2016 · 5,265 views

In this video Sam addresses the issue of mold growth in rough-turned bowls. He covers: 1) how mold grows on wood and 2) how to get rid of it. An important video. Please share.

 

Wood question ·
By: MARK Baid
July 23, 2016 · 191 views

 

The First Cut is....Important when Milling a Burl: wyomingwoodturner ·
By: WYOMINGWOODTURNER
July 19, 2016 · 12,204 views

Sam cuts into a Box Elder burl with a chainsaw. His goal is to harvest 2 blocks of wood that will later be 'turned' into hollow forms. This video will lead the way to 2 more videos highlighting the Stabilizer hollowing device designed and made by Trent Bosch.

 

Wood turning # 47 failed to spalt wood and who to go to ·
By: Woodslee Summercraft
July 05, 2016 · 1,560 views

my failed attempt to splat wood leads me to www.spaltworkz.com Steve Crawford

 

Wood turning Queen Palm test by Al Furtado ·
By: Rebel Turner
June 26, 2016 · 5,300 views

I had to do a Queen Palm test to see how queen palm would turn. I than switch over to a piece of Cheery and started a vase without having enough time to finish I might make that a part 2 in the near future http://www.biddingowl.com/Auction/item-detail.cfm?auctionID 8523&ItemID 291898&viewType 1&style 54&font 0&catName Antiques%20and%20Art

 

Status Update and Reclaiming Timber ·
By: Cip's Wood Chips
June 17, 2016 · 1,610 views

I am trying to get back into the rhythm of making videos on a regular basis. It's been difficult but I am trying. I am working on making a 'Beads of Courage' box, so , I first need to gather the timber. Here is how I go about the task.

 

Boxelder Maple ·
By: Trent Thornton
June 13, 2016 · 14 views

 

wood turning # 44 learning to spalt wood ·
By: Woodslee Summercraft
May 03, 2016 · 3,086 views

spalting is a process of decay, i attempt here to create interesting zone lines by introducing decaying matter to assist wood spalting

 

A Trip To The Lumber Yard ·
By: Carl Jacobson
April 25, 2016 · 3,525 views

Kim's email kghardwood@msn.com Pat Lap https://www.youtube.com/channel/UCcM_SykaFqrxVnq52MjI6UA/featured Todd's Channel https://www.youtube.com/channel/UCwkzX3bDamsuGj6bJGBDnzw Linn-Darbin Orvar https://www.youtube.com/user/darbinorvar I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www

 

Cutting Logs into Turning Blanks ~ Part 1 ·
By: Peter Matthew
April 16, 2016 · 17,067 views

Hi everyone! This video covers my methods for slabbing logs into turning blanks. I use my chainsaw and perform the cuts shown in this video to cut my bowl blanks. Part 2 will cover the sealing and drying of wood as well as different grain orientation options for turning. ----------------------------------------­----------------------------- My website: www.peterturnswood.com ----------------------------------------­­­­­­­­­­­­- To see my vlog and follow-up channel, go to my main channel by clicking 'Peter Matthew' up above. On my main channel, look to the right side of the screen where it sa

 

Dissecting a Tree ·
By: Brian Havens
March 07, 2016 · 17,331 views

I recently acquired a small Apple tree that I cut into a bunch of bowl blanks. When I get green wood, I like to cut it into blanks as soon as possible, so I could not afford to stop and setup the cameras right then. Once I had the blanks cut and sealed, however, I reassembled the thee on my workbench so that I could share my process of dissecting the tree into blanks. If you have never cut logs into blanks before or you just what to see my though process as I divide up the parts of the tree, then take a look.

 

Turning wood(soucer of a wood residue) ·
By: Geomobila
February 24, 2016 · 133 views

I found the workshop a piece of fossilized oak, a'd found in a river, I had a workshop about 5 years. I managed to pull a saucer, or candle holder or ashtray ... eventually it came out something. Like what came out? Do not forget to subscribe. Thank you!

 

walnut root ball ·
By: Jim Meier
February 23, 2016 · 15,229 views

A section of walnut root ball / burl that is heavily laden with silica and minerals throughout the wood. Making it very hard and dense and difficult to turn.

 

Affordable WoodTurning Practice Blanks ·
By: Barry's Woodturning
February 17, 2016 · 772 views

In this video, I show you how I made A BUNCH of woodturning blanks which I will use for spindle turning practice. I used salvaged 2x6's but I could have purchased lumber at the home center for very little cost. 'Carefree' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0

 

Purpleheart Wood ·
By: Ron Calverley
December 29, 2015 · 731 views

I was describing how Purple-heart will look as a pen blank.

 

Finding wood to turn ·
By: Tommy Akridge Designs
December 20, 2015 · 1,386 views

Finding wood / where to look

 

stabilizing wood ·
By: Dallasarea Woodturners
November 23, 2015 · 452 views

Wood Stabilization

 

The difference it makes in the choices we make Wood turning by Al Furtado ·
By: Rebel Turner
November 01, 2015 · 4,841 views

The difference it makes in the choices we make Wood turning. I decided to turn the 2cond half of the bottle washer as a non natural edge

 

The decisions we make in wood turning by Al Furtado ·
By: Rebel Turner
October 31, 2015 · 1,567 views

Sometimes we get a unique piece of wood that has many options on what to turn out of it. Is this case I had a very nice piece of Ficus and the decision I made is one that we can't go back and change our minds and makes us wonder. was the decision I made the best possible one? We'll never know the answer to that we can only guess. just do the best you can with whatever you decide.

 

Harvesting Some Hazelnut -- The Woodturners Way ·
By: PeteTGIF
October 03, 2015 · 596 views

In today's video I show you how to harvest some Hazelnut -- The Woodturner's way. Enjoy :-) ------------------------------------------------ You find me on Facebook: https://www.facebook.com/TGIFWood My private Facebook Page https://www.facebook.com/tgif1608 ------------------------------------------------ If you like to support the project PeteTGIF you can send me some stuff for the shop or donate some money. Contact information and PayPal-Link via my homepage: http://www.thankgoditsfriday.de/html/donations.html Music: Funkorama by Kevin McLeod, http://www.incompetech.com License Creative Commons 3.0 http://creativecommons.org/licenses/by/3.0/deed.de

 

Cutting a monster Maple with a Stihl 441 ·
By: Adze Woodturning
September 08, 2015 · 1,116 views

Jan cut a huge maple down and we spent the day cutting it up, and loading it on the truck. I drove the logs over to the shop with a heavy duty trailer and offloaded by hand. Tons of fun...I have some serious work ahead. I hope you enjoy the vid.

 

Naked Turner Repurposing Of Old Wood ·
By: Erik Anderson
August 23, 2015 · 1,663 views

In this video I repurpose an old piece of wood from some early 19th century furniture that was trashed.

 

Box Elder Burl ·
By: Brayden Longstaffe
August 04, 2015 · 1,189 views

Fast motion woodturning

 

Milling Spalted Firewood ·
By: Make Crazydays
July 16, 2015 · 3,619 views

This video covers how to mill up firewood into useful pieces for woodworking. He has made everything beautiful in its time. Also, he has put eternity into man’s heart, yet so that he cannot find out what God has done from the beginning to the end. – Ecclesiastes 3:11 http://make.crazydays.org/2015/07/milling-firewood/ I was inspired by some spalted maple firewood I spotted while at a tool sale. While I did pick up a grinder I also was that odd guy who asked to buy a couple handfuls of their firewood. The next day I milled up a piece of the firewood into a few usable pieces. This video outlines the process I used to turn the firewood into blanks for turning and a couple small boards. Homepage: http://make.crazydays.org Shop: https://make.crazydays.org/shop/ Instagram: https://www.instagram.com/makecrazydays

 

Burl Hunting in the Urban Jungle for some SalvageTrees and Burls ·
By: Turning Round
June 27, 2015 · 30,919 views

I heard the sound of backhoes and tractors and my ears perked up. I wondered what is going on. So when I drove by I saw the most amazing thing, a huge and mean huge pile of Burl. One so big I am not sure I can even get it. This is the adventure of the first time I headed to the burl pile with my toys. Burl Wood is amazing and has great wood figure and is really fun to work with.

 

Video 3 Wood identification And small projects ·
By: Harry’s Woodcraft
June 17, 2015 · 1,065 views

Video 3 Wood identification And small projects I've got four of these pieces of timber, They where the legs on a bench in a old garage. Thank you for watching Harry Watts The Little Garden Shed Workshop The blind woodturner Christopher Fisher https://www.youtube.com/channel/UCkkxNOUNP8kNT7Gvpc1MjJg Pen making Tony Oaksho https://www.youtube.com/user/oaksho Pen making Bob RJB WoodTurner https://www.youtube.com/channel/UCmmCqkA0iEdwVsaS7kVwGLw

 

#75 Where can I find Woodturning Wood? ·
By: Stephen Ogle
May 03, 2015 · 244,292 views

Just thought I would make a video about acquiring wood for turning after a posting I had read. I hope you find this production helpful. Just remember that wood is cheap. If you know where to look.

 

David Ellsworth ·
By: Beyond Wood
April 30, 2015 · 12,464 views

Full Length - Enjoy! Bernard

 

Wood hunting season is in BIG time :) ·
By: LivingArtsCo
April 17, 2015 · 31 views

Helping my friend Jason and collecting lots of wood for my projects, both on the lathe and rustic furniture. In Ashe and neighboring counties, Call Jason Miller' All Around Tree Service' 828-773-2331

 

Woodturning - Converting an Alder Log ·
By: Kim Gowney
March 06, 2015 · 569 views

A short demo of my sawing trestle in use

 

Found Paper Bark Tree Wood turning by Al Furtado ·
By: Rebel Turner
February 17, 2015 · 2,286 views

Beautiful wood grain hard wood and yet is considered to be a nuisance tree in Florida All excited when I picked it up and did a Google search on what type of wood it was by the bark. how funny it is known as Paper Bark Tree also Melaleuca Tree Originally from Australia and used in Florida's wetlands but it became very invasive and took over all other local vegetation.Beautiful color and wood grain I wonder why it's not harvested for hobbies and other wood projects

 

#16 Update and Making Laminates - Wood Turning - Acolyte Turner ·
By: Tom Stratton
February 15, 2015 · 12,232 views

A short channel update followed by a method of creating laminated blanks for wood turning. Further projects, turnings and information can be found at http://tomturns.com Mention of trade names or commercial products does not constitute endorsement by The Acolyte Turner (Tom Stratton) except where explicitly stated. All brand and product names are trademarks or registered trademarks of their respective companies and are hereby acknowledged. CHANNEL TAGS Acolyte Turner, Acolyte, Wood, Turner, Turning, Project, Working, Ossett, West, Yorkshire, UK, Nova, Record, Power, DVR, XP, BS350, Lathe, Bandsaw, Sanding, Sandpaper, wood turning TAGS Acolyte Turner, Wood Turning, Turning, Project, Ossett, West Yorkshire, UK, Nova, Record Power, DVR XP, BS350, Lathe, Bandsaw, Sanding, Sandpaper, Ruth Niles, Off Centre Jig, Off Center Jig, help, tips, training, learning, how to, Tip, Tom Stratton, Turning Tools, Carbide Tools, Bowl Gouge, Spindle Gouge, Roughing Gouge, Tool Sharpening, Sharpening,

 

#3 Unboxing wood ·
By: Yuval Lahav Woodturning
February 08, 2015 · 999 views

Welcome back to my small shop! In this video we will be unboxing some wood I had ordered from the UK, and also an envelop from Carl Jacobson, my prize as a runner up in the 2014 Christmas ornament challenge! Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Josh Woodward - She Lost Her Wings (Instrumental Version) Josh Woodward - Evolution (Instrumental Version) Josh Woodward - California Lullabye (Instrumental Version) All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Gem In the Woodpile: Shout out to Custom Chris ·
By: Adze Woodturning
February 04, 2015 · 294 views

I was cutting firewood today and found an awesome piece of spalted wood.

 

Loading a Giant ·
By: Brendan Stemp
January 25, 2015 · 151,715 views

I was given a huge Redgum that had fallen in a paddock. This is the full story of how we loaded the logs onto the tray of a truck to transport them to a mill. There is also footage of the logs being sawn at the mill and the final stack of timber.

 

Turning Wood Harvested After A Forest Fire ·
By: Gord Rock
December 09, 2014 · 4,582 views

Testing how softwood turns after it's been exposed to a forest fire. I was quite surprised at how hard the wood became due to its exposure to the high heat. Mike Waldt's Channel: https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w

 

Wood By Kyle Toth ·
By: Kyle Toth
September 12, 2014 · 5,218 views

A little behind the scenes that Colton Brandt at http://www.newlegacyproductions.squarespace.com shot and edited for me. To keep up with my work throughout the week check out the links below. Thanks for watching! When you think of wood think of Toth. Toth like Both. http://www.woodbykyletoth.com https://m.facebook.com/woodbytoth https://mobile.twitter.com/woodbytoth http://instagram.com/tothtoth

 

How Best to Use a Small Olive Log: Woodturning ·
By: WYOMINGWOODTURNER
September 08, 2014 · 81,557 views

Sam Angelo analyzes an olive log to decide how to use it: bowls? lidded boxes? or hollow forms. Watch and find out what happens to this wood.

 

Finding Turning Wood ·
By: Roundabout Woodworks
August 23, 2014 · 2,917,042 views

Where to find turning wood and what to do with it. Processing logs into turning stock and roughing a bowl (red oak) from the stock. (The bowl will be finished in this video - http://youtu.be/JcCfencr73c ).

 

Barking the peach Log ·
By: Desmond Shore
August 06, 2014 · 252 views

Removing Bark from a Peach Log

 

Reading the Bark on Burl Wood: woodturning ·
By: WYOMINGWOODTURNER
July 29, 2014 · 45,070 views

Sam Angelo discusses milling burl logs by reading the bark on the large Box Elder logs.

 

Milling Box Elder Burl ·
By: WYOMINGWOODTURNER
July 27, 2014 · 5,430 views

Sam shows off some large Box elder burl logs from Casper Mountain-Casper, Wyoming. He discusses his plans for milling and sealing the wood.

 

"What Goes around Comes Around" ·
By: Beyond Wood
July 22, 2014 · 1,565 views

Featuring Art from Graeme Priddle -- Derek Bencomo and Clay Foster Extracted Art pieces from the 1500 masterworks of the 'Beyond Wood collection' from over 120 worldwide renowned Artists. I hope you will enjoy this little clip. Bernard

 

Not a Minute Lost ·
By: Beyond Wood
June 15, 2014 · 2,434 views

'Not a Minute Lost' Featuring Art from Gianfranco Angelino (R.I.P.) -- Virginia Dotson -- Ron Fleming and Stephen Hogbin Extracted Art pieces from the 1500 masterworks of the 'Beyond Wood collection' from over 120 worldwide renowned Artists. I hope you will enjoy this little clip. Bernard

 

53 Wood turning spalted timber ·
By: Roger Webb
May 24, 2014 · 3,467 views

Turning a square Spalted timber platter ; By Australian Inventor Roger Clyde Webb. An Australian Inventors Workshop. Disclaimer: These videos are intended for entertainment and inspiration. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw it in one of my videos.

 

51 Woodturning recycled oak ·
By: Roger Webb
May 15, 2014 · 1,602 views

51; Wood Turning a Long stem Art Décor goblet from recycled oak Dunnage demonstration and basic tutorial. By Roger Clyde Webb An Australian Inventors Workshop. Disclaimer: These videos are intended for entertainment and inspiration. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw it in one of my videos.

 

Large Jarrah Burl ·
By: Neil Turner Artisan
May 07, 2014 · 124 views

Bowl saving a jarrah burl

 

Jarrah Burl ·
By: Neil Turner Artisan
May 05, 2014 · 209 views

Large dry Jarrah burl turning for Linton and Kay Galleries Exhibition. This burl weighed 53kg when first on the lathe..

 

Large Jarrah Burl ·
By: Neil Turner Artisan
May 04, 2014 · 200 views

Jarrah Burl ..750mm x 270mm for Linton & Kay Galleries exhibition. Starting off slow....Always wanted to turn a piece this large....

 

34"37'4°N by 117"50'1°W ·
By: Beyond Wood
April 30, 2014 · 1,205 views

Featuring Art from Michael Peterson -- John Jordan - Todd Hoyer -- Mark Sfirri and Hugh McKay Extracted Art pieces from the 1500 masterworks of the 'Beyond Wood collection' from over 120 worldwide renowned Artists. I hope you will enjoy this little clip. Bernard - www.beyondwood.com

 

Repair a Punky Turning | Woodworker's Guild of America ·
By: WoodWorkers Guild Of America
April 24, 2014 · 7,112 views

George Vondriska teaches you how to use CA glue to salvage any turning project that has a rotted or punky patch. He demonstrates this simple woodworking tip on a piece of spalted maple that he's turning into a bowl. By applying multiple coats of medium viscosity CA glue while the piece is on the lathe, you can fill in any voids and even bring out some extra dark to make it extra aesthetically pleasing.

 

The Intricacies Of Spalting: A Master Overview By Spalt Expert Sara Robinson Ph.D ·
By: nwfiguredwoods
April 11, 2014 · 18,632 views

Ph.D Sara Robinson talks about the the state of custom fungi inoculation, and using specifically curated fungi to induce brilliant spalting in different types of wood commonly used by turners. A professor at Oregon State University, Sara leads a team of researchers at the forefront of spalting study, and having written more than 30 articles on the subject spanning academic journals to books, Northwoods Figured Woods was very lucky to have her on site to talk about her work, and answer some of the more common questions raised about this fascinating subject. For more information, you can visit her website: www.northernspalting.com To see more, please subscribe, or like our channel, or visit www.nwfiguredwoods.com for more information.

 

"For Your Eyes Only" ·
By: Beyond Wood
February 07, 2014 · 4,128 views

Featuring Art from Jean-Francois Escoulen (France), Gianfranco Angelino (Italy), Hans Weissflog (Germany), Christian Burchard & Todd Hoyer Extracted Art pieces from the 1500 masterworks of the Beyond Wood collection ....over 120 worldwide renowned Artists. I hope you will enjoy this little clip. Bernard

 

Bring Out The Purple In Your Purple Heart (Update) ·
By: RJBWoodTurner
January 20, 2014 · 15,189 views

After the first 'Bring Out The Purple In Your Purple Heart' video, I discovered that sanding right after applying the heat helped to bring out more of the purple color and gave an overall better looking pen blank. The heat was raising the grain giving a rougher less refined look. This second video talks about that issue and demonstrates the fix.

 

Bring Out The Purple In Your Purpleheart ·
By: RJBWoodTurner
January 13, 2014 · 35,369 views

This is a quick tip video describing what I do to bring out the color in my Purpleheart pen blanks. By using a torch, I can quickly oxidize the wood maximizing the color. A quick note: Don't hold the heat on the piece to long, it will burn, and I have found that I get the best results if I sand first then after burning I re-sand with the finer grits to remove any grain that raised during the process. You will notice some small specks of wood that come off on the paper towel as I am polishing, Sanding would have taken care of those and made a much smoother finished product. Regards, Bob

 

"Time of a Song" ·
By: Beyond Wood
November 05, 2013 · 1,120 views

Featuring Art from Bud Latven, William Hunter, Frank E Cummings III & Giles Gilson Extracted Art pieces from the 1500 masterworks of the Beyond Wood collection... over 120 worldwide renowned Artists. I hope you will enjoy this little clip. Bernard Blain

 

Beyond Wood - David Ellsworth ·
By: Beyond Wood
September 24, 2013 · 9,067 views

David Ellsworth is credited by a generation of woodturners for taking the hollow vessel beyond the accepted limitations. Influenced by ceramics and the fine arts, Ellsworth is known for his technical ability and understanding of form, as well as his exploration of the vessel as sculptural statement. From the exclusive 'Beyond Wood... Portrait of an Artist' This video explore the work and passion of a master and one of the earliest wood sculptors of our generation: David Ellsworth. Produced on Location by Bernard Blain and hosted by Ray Leier. Visit: http://www.beyondwoo.com

 

Cutting Up A Burl ·
By: Brian Markham-Woodturner
September 15, 2013 · 852 views

Brian Markham's burl bowls and platters begin in the forest. This maple burl was examined carefully to find the best angles for cuts with the chainsaw. The distinctive figuring and colouration of maple will make a beautiful raw edge bowl.

 

Frank Cummings III ·
By: Beyond Wood
September 12, 2013 · 765 views

' My work is as much about ideas and emotions as it is about materials and process. It is based on a spiritual attitude which reveres nature, and is grounded in truth to materials with the belief that to make a thing well is in itself an act of prayer.' by: Kevin Wallace The elegant vessels of Frank Cummings are vastly different from the work of any other artist working in the field of turned wood. Combining exotic woods or exceptional examples of domestic woods with gem stones and gold, he creates work which transcends utilitarian function and attempts a contribution to the spiritual and emotional well being of the human condition.

 

Spalted beech for upcoming projects ·
By: Tom F
June 13, 2013 · 622 views

No description available.

 

Pentacryl Wood Stabilizer ·
By: Ron Calverley
June 08, 2013 · 67,980 views

Treating green wood with 'Pentacryl Wood Stabilizer' to prevent cracking. It really works!

 

Oak Burls ·
By: 207 Made
April 07, 2013 · 329 views

Oak Burls

 

Woodturning Cocobolo Wood ·
By: Lamar Sineath
March 28, 2013 · 8,875 views

Cocobolo was very hard to find but I finally found one lumber mill in Lakeland that had 1.8 board feet left. After working with Cocobolo, I'm dying to find more!

 

Turning Different Wood Types - A Comprehensive Guide To Better Understanding How Your Wood Turns ·
By: nwfiguredwoods
February 22, 2013 · 5,566 views

Les from North Woods Figured Woods covers how to turn a variety of species offered at NWFigured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

Wild Cherry - Quick Turning Tips ·
By: nwfiguredwoods
February 22, 2013 · 627 views

Les from North Woods Figured Woods covers how to turn Wild Cherry, a species occasionally offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

White Oak - Quick Turning Tips ·
By: nwfiguredwoods
February 22, 2013 · 1,052 views

Les from North Woods Figured Woods covers how to turn White Oak, a species offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

Silver Maple - Quick Turning Tips ·
By: nwfiguredwoods
February 22, 2013 · 262 views

Les from North Woods Figured Woods covers how to turn Silver Maple, a species offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

Madrone - Quick Turning Tips ·
By: nwfiguredwoods
February 22, 2013 · 596 views

Les from North Woods Figured Woods covers how to turn Madrone, a species offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

California Buckeye - Quick Turning Tips ·
By: nwfiguredwoods
February 22, 2013 · 502 views

Les from North Woods Figured Woods covers how to turn California Buckeye, a species offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

Box Elder - Quick Turning Tips ·
By: nwfiguredwoods
February 22, 2013 · 1,269 views

Les from North Woods Figured Woods covers how to turn Box Elder, a species offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

Black Walnut - Quick Turning Tips ·
By: nwfiguredwoods
February 22, 2013 · 1,722 views

Les from North Woods Figured Woods covers how to turn Black Walnut, a species offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

Black Locust - Quick Turning Tips ·
By: nwfiguredwoods
February 22, 2013 · 2,007 views

Les from North Woods Figured Woods covers how to turn Black Locust, a species offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

Big Leaf Maple - Quick Turning Tips ·
By: nwfiguredwoods
February 22, 2013 · 592 views

Les from North Woods Figured Woods covers how to turn Big Leaf Maple, a species offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

Beyond Wood - Ray Allen ·
By: Beyond Wood
February 01, 2013 · 169,058 views

Beyond Wood... Portrait of an Artist http://www.beyondwood.com After 30 years in the construction industry, Ray Allen (1930-2000) retired in 1982. In 1986, Allen found his passion when he began turning simple pieces. Ray's work can be found in many of the finest private collections of contemporary woodturning as well as the permanent collections of the Contemporary Museum, Honolulu, HI, the Detroit Institute of Arts, Detroit, MI, the Los Angeles County Museum of Art, Los Angeles, CA and the Renwick Gallery, Smithsonian Museum of American Art, Washington, DC. Produced on location by Bernard Blain and narrated by Ray Leier, noted expert in the field of contemporary wood art, this video provides an in-depth look at the work and passion of Ray Allen.

 

Todd Hoyer ·
By: Beyond Wood
January 25, 2013 · 1,717 views

NEW RELEASE from the exclusive 'Beyond Wood... Portrait of an Artist' series of videos highlighting the work of Internationally known Turned Wood Sculptors. Produced on Location by Bernard Blain and hosted by Ray Leier. ARTIST'S STATEMENT My work has been based on change. Each piece and idea is an integral step on the path of growth. From my production items where I learned the use of tools and techniques, to my vessels where I explored the material, each step has been towards greater understanding. My work has been a reflection of the changes in my life. Consciously and subconsciously, ideas

 

Scratching the Surface ·
By: Beyond Wood
January 19, 2013 · 2,270 views

The Craft & Folk Art Museum 5814 Wilshire Blvd. Los Angeles January 27 - May 5 Scratching the Surface An exploration of texture and form

 

Beyond Wood - William Hunter ·
By: Beyond Wood
January 19, 2013 · 18,756 views

http://www.beyondwood.com From the exclusive 'Beyond Wood... Portrait of an Artist' This video explores the work and passion of a master and one of the earliest wood sculptors of our generation: William Hunter Produced on Location by Bernard Blain and hosted by Ray Leier. William Hunter entered the field of contemporary during its formative stages and went on to become one of the leading figures in the contemporary craft movement. Over the last three decades of the 20th century, Hunter and his contemporaries pioneered a new language in wood. They the field as it evolved from its foundations in

 

Lignum Vitae ·
By: onewaytoturn
January 07, 2013 · 5,406 views

Learning that there is so much that people don't know about lignum vitae and that what was thought to be true lignum vitae it really Argentine lignum Vitae

 

Beyond Wood - Todd Hoyer ·
By: Beyond Wood
December 05, 2012 · 2,472 views

New Release from the exclusive 'Beyond Wood... Portrait of an Artist' series of videos highlighting the work of Internationally known Turned Wood Sculptors. Produced on Location by Bernard Blain and hosted by Ray Leier. Visit: http://www.beyondwood.com ARTIST'S STATEMENT My work has been based on change. Each piece and idea is an integral step on the path of growth. From my production items where I learned the use of tools and techniques, to my vessels where I explored the material, each step has been towards greater understanding. My work has been a reflection of the changes in my lif

 

Woodturning: Wood hunt during hurricane "Sandy" . ·
By: LivingArtsCo
October 31, 2012 · 1,216 views

Woodturning is fantastic, but for me it starts with 'hunting' for wood! So During hurricane Sandy, I decided to go on the hunt! Found beautiful wood on my preoperty. In these parts of the NC mountains, deer season is almost all the time. Forget about the rules, this explains the neon hat! Wearing 'Deer Camo' and carrying branches(rack) can be hazardous to your health!!! Ended up turning 2 pieces, even if it was about 20degF in my outdoor woodshop! Great day.

 

Spalted Wood - Quick and Easy Tips For Turning ·
By: nwfiguredwoods
October 24, 2012 · 10,842 views

In this video demonstration, Les from North Woods shows us how to successfully turn spalted wood. - Known for its beauty, this fascinating but sometimes fickle wood is a favorite for turners looking to improve their skills while yielding beautiful results. North Woods carries a wide selection of spalted pieces which can be seen at www.nwfiguredwoods.com Music by Kevin McLeod www.incompetech.com Pieces used: Dirt Rhodes, Matt's Blues, Niles Blues, Porch Blues, Slow Burn Videography by Guthrie Straw - www.pinchflatfortune.com

 

How To Identify Figure In A Living Tree ·
By: nwfiguredwoods
October 16, 2012 · 35,587 views

Les from North Woods goes through the identification process of figure for Big Leaf Maple. For more, visit www.nwfiguredwoods.com Music by Kevin Mcleod www.incompetech.com Pieces used: Porch Blues, Matt's Blues, Dirt Rhode Videography by Guthrie Straw - www.pinchflatfortune.com

 

DSCF4343.AVI New load of wood ·
By: Desmond Shore
September 24, 2012 · 125 views

For Wood Turning

 

The Tree Book ·
By: woodturningwithtim1
July 27, 2012 · 4,762 views

Tim introduces you to a helpful book which makes identifying a tree's species... as easy as falling out of one!

 

 

Burr Oak- Chainsawing for the best figure 2 ·
By: Dan Walker
June 09, 2012 · 542 views

Burr Oak- Chainsawing for best figure 2

 

Burr Oak- Chainsaw for the best figure ·
By: Dan Walker
June 09, 2012 · 2,284 views

cutting for the most figure 036 Stihl 25' bar

 

Desmond Shore's Wood Turning ·
By: Desmond Shore
May 26, 2012 · 242 views

Show you the timber that was given to me.

 

Wood Turning Update ·
By: Lamar Sineath
April 22, 2012 · 419 views

Turning a tree into Woodturning blanks

 

Preparing Some Olive wood For Future Woodturning ·
By: Jake Gevorgian
April 06, 2012 · 1,126 views

In my neighborhood an olivewood tree was cut. I picked it up with my Chevy truck, cut them up with an electric chainsaw, straightened the surfaces with the jointer*, waxed it in paraffin wax, * correction, when I uploaded this video from my iPhone I wrote planer instead of jointer. Anyhow, both do the same job in a bit of different way :)

 

Turning Pine ·
By: Desmond Shore
April 01, 2012 · 440 views

 

Selecting Wood for Wood Turning ·
By: Lamar Sineath
February 19, 2012 · 3,304 views

This video is about my wood purchases at a lumber mill. I had major problems getting this video uploaded. Hope it works this time. Hope you enjoy it!

 

Scavenging Wood for Turning - Big Old Pear Tree ·
By: Getting0Done
February 17, 2012 · 2,970 views

Got a tip on a lot being cleared so after work I grabbed the old man and got to work. I haven't turned to much pear so this will be something new and I will probably do a video on the sealing, blank prepping and of course turning with this pile. The pieces got pretty damaged from the excavator but still is very salvageable. Thanks for watching and enjoy!

 

What is Figure? - A Closer Look At Big Leaf Maple ·
By: nwfiguredwoods
February 11, 2012 · 15,162 views

Visit us at www.nwfiguredwoods.com! Join North Woods Figured Wood as we take a look at the different types of figure found in highly expressive wood. Watch and learn as we go into detail about the different types of wood available to you at North Woods. Videography by Guthrie Straw - www.pinchflatfortune.com Music By Kevin McLeod - www.Incompetech.com - Licensed under Creative Commons Attribution 3.0

 

From Burl To Block: The Story of Your Wood ·
By: nwfiguredwoods
February 11, 2012 · 165,656 views

Visit us at www.nwfiguredwoods.com! Join North Woods Figured Wood as we explore the process from the Burl to the Block, showing the work and care that goes into each piece we sell at North Woods. Videography by Guthrie Straw, www.pinchflatfortune.com Music By Kevin McLeod - www.Incompetech.com - Licensed under Creative Commons Attribution 3.0

 

Hey, I have a tree ·
By: woodturningwithtim1
July 16, 2011 · 3,328 views

Sooner or later all woodturners get that call from a friend 'Hey, I have a tree that needs to be cut down! Can you help?'. Tim gives you his opinion on how to handle that call..

 

Turning Urban Lumber ·
By: Brian Havens
May 01, 2011 · 3,421 views

Every day, in urban areas, trees are cut down for various reasons. These trees are a veritable treasure trove of lumber that can be reclaimed, as opposed to finding its way to the junk yard or fireplace. As well, many of the species of wood growing locally in your area may be otherwise unavailable from lumber suppliers. This episode covers the steps required to reclaim such wood for turning.

 

Free Wood ·
By: Carl Jacobson
April 02, 2011 · 7,368 views

http://theturningshop.blogspot.com/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips projects and plans with Carl Jacobson. Wood turning basics on a Lathe with basic wood turning tools. Tha hunt for free wood. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

PoppedQuiltedMaple ·
By: charlieb1946
January 14, 2011 · 1,023 views

Sometimes, you don't need actual movement to get the effect of movement. This is an example of Nature's hologram - a piece of quilted maple - 'popped' by a few coats of dewaxed lemon shellac. This piece of wood is actually FLAT - honest - it's really flat. For how this holographic popped grain thing works, check out tnfo on this web page http://web.hypersurf.com/ charlie2/PoppingFigure/PoppingTheGrain.html Comments & questions welcomed

 

The Straightedge: Turning Urban Lumber (Part 4) ·
By: Brian Havens
May 11, 2010 · 20,991 views

Every day, in urban areas, trees are cut down for various reasons. These trees are a veritable treasure trove of lumber that can be reclaimed, as opposed to finding its way to the junk yard or fireplace. As well, many of the species of wood growing locally in your area may be otherwise unavailable from lumber suppliers. This episode covers the steps required to reclaim such wood for turning.

 

The Straightedge: Turning Urban Lumber (Part 3) ·
By: Brian Havens
May 11, 2010 · 28,935 views

Every day, in urban areas, trees are cut down for various reasons. These trees are a veritable treasure trove of lumber that can be reclaimed, as opposed to finding its way to the junk yard or fireplace. As well, many of the species of wood growing locally in your area may be otherwise unavailable from lumber suppliers. This episode covers the steps required to reclaim such wood for turning.

 

The Straightedge: Turning Urban Lumber (Part 2) ·
By: Brian Havens
May 11, 2010 · 148,681 views

Every day, in urban areas, trees are cut down for various reasons. These trees are a veritable treasure trove of lumber that can be reclaimed, as opposed to finding its way to the junk yard or fireplace. As well, many of the species of wood growing locally in your area may be otherwise unavailable from lumber suppliers. This episode covers the steps required to reclaim such wood for turning.

 

The Straightedge: Turning Urban Lumber (Part 1) ·
By: Brian Havens
May 11, 2010 · 10,303 views

Every day, in urban areas, trees are cut down for various reasons. These trees are a veritable treasure trove of lumber that can be reclaimed, as opposed to finding its way to the junk yard or fireplace. As well, many of the species of wood growing locally in your area may be otherwise unavailable from lumber suppliers. This episode covers the steps required to reclaim such wood for turning.

 

The hunt for wood ·
By: Carl Jacobson
April 05, 2010 · 10,317 views

http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects with Carl Jacobson. Wood turning basics on a Lathe with basic wood turning tools. Taking you from start to finish with a ruff piece of wood to your sanded and finished project with beeswax and mineral oil for a superb finish. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Lt 15 E from Wood-Mizer.WMV ·
By: Hans-Jürgen Reger
December 06, 2009 · 7,357 views

Arbeiten mit der Säge Lt 15 von Wood-Mizer

 

getting wood in peru ·
By: PERUTURNER
July 23, 2009 · 4,149 views

wood buying in peru by a american woodworker

 

Wood for Spindle Turning ·
By: Darrell Feltmate
August 06, 2007 · 11,765 views

Preparing a block of wood for spindle turning using a chain saw and a band saw. http://aroundthewoods.com

 

Return to Turning Videos

Great Bargains


Heavy Duty Live Center

On Sale for only $16.53

List Price: $19.95

Click here for more information or to purchase

 


Dremel Rotary Tool Kit

On Sale for only $139.00

Save $60.99 (30%)

List price: $199.99

Click here for more information or to purchase


Roller Stand

On Sale for only $23.79

Save $6.11 (20%)

List Price: $29.90

Click here for more information or to purchase

 


Easy Wood Tools - Easy Start Rougher + Finisher + Detailer

On Sale for only $159.99

List price: $206.97

These tools have the smaller 9" maple handle and are 12.5" overall.

Click here for more information or to purchase


NOVA 48232 G3 Reversible Wood Turning Chuck

On Sale for only $99.00

Save $60.99 (38%)

List price: $159.99

Click here for more information or to purchase

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Robust Tools
Saburrtooth
Woodturning with Tim

(Click any Ad to go to our Sponsor's Website)