Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Alternative Materials Videos (57)

Sort by

Or click here to: Search All Videos


Turning soapstone on a wood lathe
By: mhebb1
November 19, 2018 · 152 views

I'm trying to provide some basic info on turning soapstone. My first time using a video editor as well. Soapstone is fragile. Be careful with spindle projects that have narrow necks. Correction: In turning pens, I use only scrapers. Mike Hebb

 

Recycled Skateboard Project / Woodturning
By: Carl Jacobson
July 06, 2018 · 11,991 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII Mobile shop road trip! This project is made out of recycled skateboards. Paul from Made By Skate Boarding made this awesome blank for me to turn at the demo on Saturday. We had a great time hanging out with a group of really cool people. @madebyskateboarding https://www.instagram.com/madebyskateboarding/?hl en Pratt Fine Arts http://pratt.org/ South Puget Sound Woodturners http://www.spswoodturners.org/ Woodcraft https://www.woodcraft.com/stores/seattle I

 

woodturning: camphor & perspex bowl
By: Guil The Bearded Woodworker
June 11, 2018 · 1,079 views

perspex and camphor Well why not give it a go. A big thank you to Scott Parat from 'wood turning basics' group on face book for all your support Scott i apologise i have probably said you name wrong in the video FACEBOOK: https://www.facebook.com/beardedwoodworker/ Instagram: https://www.instagram.com/guilthebeardedwoodworker/ SEND ME YOUR STICKERS, OR SEND ME A BLANK OR WHATEVER: 'Guil Noronha the bearded woodworker' po box 353 Maitland, NSW, Australia 2320

 

Polymer clay & resin key ring.
By: SCCFORUM
March 11, 2018 · 342 views

Brass tube wrapped in Premo opal polymer clay. I then added some blue strips and cast in Alumilite. Sanded to 1200 wet sand and buffed on mops. Alumilite and Polymer clay from Metalclay Ltd The key ring is a mix of parts. Keyring and light pull. Both from Axminster.

 

Turning Polymer clay.
By: SCCFORUM
March 11, 2018 · 254 views

An enjoyable project and good test.

 

Out of Round Rubik's Cube
By: woodturningwithtim1
May 22, 2017 · 4,479,440 views

for the fun of it... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

WTF are you thinking #2 Clay on a lathe
By: Rich McNatt
May 10, 2017 · 605 views

 

Resin Bowl and Paint Keychain Follow-up
By: The Woodshop
May 08, 2017 · 1,383 views

This video is the follow-up for the bowl and keychains. Utah Symposium: https://utahwoodturning.com/ UKIWS: http://www.ukiws.co.uk/ KS Symposium: http://www.woodturner.org/ Peter Brown: https://www.youtube.com/channel/UC3CrzXzBFVqEopj5T1jiRtA Heath Knuckles: https://www.youtube.com/channel/UC7ym... Steve Templeboy turing: https://www.youtube.com/user/stevo15771 Here's a link to some of the tools I use in my videos, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday, and I'm live Monday, Wednesday, and Friday. Check out my Twitch channel. https://www.twitch.tv

 

Wood turning - Guide on inlay Milliput epoxy bowl and review of Padauk wood.
By: CraftWithAfshin
May 08, 2017 · 2,007 views

Hi everyone today I will be turning a Padauk bowl with Milliput inlay, I have never turned Padauk before but it turned out to be very beautiful wood with interesting smell which almost smells like Food spice Garam masala, Thank you all for watching! Music: Concentration Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

turning soapstone bowl - Specksteinschale drechseln- Soapstone - Speckstein - DIY - Holzweger
By: Thomas Hilleke
May 06, 2017 · 3,180 views

Speckstein http://amzn.to/2qNA0K7 Specksteinöl http://amzn.to/2pkoBB7 Staubschutzmaske http://amzn.to/2qNUann Absauganlagen http://amzn.to/2qagmvI 2 Komponenten Kleber http://amzn.to/2pM0o9u Schaber, z.B. aus dem Set http://amzn.to/2plrDow Abstechstahl http://amzn.to/2qMFUfj Handycam http://amzn.to/2q3Blfo Kamera http://amzn.to/2pT0HQV ******************************************************************* Wer mich direkt und freiwillig unterstützen möchte, darf gern einen Blick auf meinen Wunschzettel werfen https://smile.amazon.de/registry/wishlist/3MP4KVU3C8HKT ***************************

 

Brennholzschale 2.0 gedrechselt, woodturning a Firewoodbowl2.0 DIY
By: Woodturning F-Z
May 05, 2017 · 24,636 views

drechseln meiner 2 Brennholzschale, diesmal habe ich gestocktes Buchenholz und Epoxidharz in schwarz und rot verwendet. woodturning a Firewoodbowl from beechwood and red and black epoxi resin Epoxidharz:https://www.amazon.de/gp/product/B01928FT1K/ref oh_aui_detailpage_o03_s00?ie UTF8&psc 1

 

#21 Enclosed Bowl with Aluminium & Acrylic Inlay
By: Andrew Whale
May 01, 2017 · 750 views

Hi This is my first attempt at making a bowl with an Aluminium & Acrylic inlay. Watching Jim Overton's YouTube channel inspired me to have a go. Check out Jim's channel (Jimson's Stuff) at: https://www.youtube.com/channel/UC6h82LH3PtdiSHaj_7f09Fg The aluminium material was created by mixing epoxy resin with aluminium powder. I encountered numerous air holes in the aluminium when sanding, and it took ages to fill and re-sand. I will think twice before using this method again and any advice on alternative methods would be welcome. For the coloured pattern I used 3mm opaque acrylic. Next time I w

 

Out of Round-Corn
By: woodturningwithtim1
March 20, 2017 · 385,399 views

for the fun of it.... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Turning a Cast Resin Sphere Sam Angelo, wyomingwoodturner
By: WYOMINGWOODTURNER
January 15, 2017 · 12,821 views

Sam turns one of his recent resin castings into a sphere. He shows the process and tools used in completing this project. For some videos related to resin casting visit Zac Higgins at..... https://www.youtube.com/user/NVWoodwerks/videos

 

Turning Corian
By: Jake Webb
November 15, 2016 · 2,551 views

My first attempt at turning Corian. Lets just say I learnt a lot. My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

Turning a Breeze / Cinder block.
By: Blind Woodturner
November 14, 2016 · 1,832 views

Using a slightly different medium!

 

Woodturning and casting resin
By: Harry’s Woodcraft
October 09, 2016 · 4,359 views

Harry’s Woodcraft at the Little Garden Shed Workshop Woodturning and casting resin In this video I am making a paperweight or an ornament for a desk or dressing table using casting resin. Music: Humidity silent partner Thank you for watching Please like, share and subscribe You can also follow me on: facebook: https://www.facebook.com/harrybrian.watts Instagram https://instagram.com/harrys_woodcraft/ twitter: https://twitter.com/HarrysWoodcraft

 

Wood Turning: Using the Skew On Alumilite Pen Blanks.
By: Turning Round
August 31, 2016 · 1,165 views

In this Wood Turning video I show close up action of using my big Skew Chisel on Alumilite Pen Blanks. I am turning two Wall Street II pens. The blanks are Custom made using Alumilite White with red and orange dies. The blanks are pretty cool. I have an etsy store that has many different items available for Wood Turners, take a look and be sure to like and subscribe. https://www.etsy.com/shop/TurningRound Https://www.instagram.com/turninground

 

Making a Gothic Goblet from Compact Disc Cases !!
By: Templeboy Turnings
August 05, 2016 · 14,426 views

In this episode of Templeboy Turnings I turn a two tone blue/purple gothic goblet from compact disc cases. Continuing on from the last episode I put the three blanks I made from disc cases on the lathe and turn them into a beautiful ornamental Gothic Goblet. Intro/Outro music written and owned by Paul Mooney---- song 'Bullet from a gun' Please contact Paul on Facebook messenger for details about the song........ https://www.facebook.com/profile.php?id 100007379238948 All other music taken from YouTube creates library....... Please visit my website here :- http://templeboyturnings.com/ Ple

 

BILL JONES IVORY TURNER CLIP 06
By: Bill Jones, The Compleat Turner
June 03, 2016 · 683 views

Notes from Tim Inman: The Point Tool. Bill Jones continues his turning demonstration at the Utah Woodturners Symposium 2001. Bill compares using 3-corner files to round bar stock of high speed steel for making the Point Tool. Sharpening techniques include hollow grinding versus flat honing. Bill explains bead cutting with the Point Tool and begins to prepare a landing for the male thread he will cut in the next segment.

 

BILL JONES IVORY TURNER CLIP 05
By: Bill Jones, The Compleat Turner
May 25, 2016 · 604 views

Bill Jones continues in his 2001 Utah Woodturners Sypmosium demonstration. This time, Bill demonstrates hand thread chasing. Bill is at a disadvantage during this demonstration as he does not have his favorite 'variable speed foot pedal' to use with his lathe. A note from Tim Inman: I have made one of these infinitely variable speed foot pedals for one of my lathes per the instructions in Bill's first book, 'Notes from the Turning Shop.' From my own experience I can share that the foot pedal gives an incredible benefit to hand work such as fitting and thread chasing. Watch carefully as Bill moves fluidly and gracefully chasing threads. He makes something very skillful look like it must be easy enough for any beginner to do. His armrest is key. Hand threading is all about fluid skill and timing, with nothing to do with force.

 

BILL JONES IVORY TURNER CLIP 04
By: Bill Jones, The Compleat Turner
May 24, 2016 · 524 views

Bill Jones, the last of 5 generations of British Ivory, Bone and Hardwood turners, continues his demonstration at the Utah Woodturning Symposium in 2001. 'Hardwood' to Bill Jones meant woods that were REALLY hard, like African Blackwood, Pink Ivory, English Box, Kingwood, Ebony, etc. In this segment, Bill demonstrates hand cutting rose segments in man-made ivory substitute and discusses the possible art worthiness of 'crumbling threads.' I can assure you, Bill Jones was not truly advocating for 'crumbling threads' as he spoke, but was expressing his disfavor with those making excuses for poor materials or workmanship by calling them 'art.' Bill Jones was the most highly skilled man I have ever known - in any trade - and he made no excuses for poor quality. Still he was one of the most humble and gentle people I have ever know as well.

 

BILL JONES IVORY TURNER CLIP 03
By: Bill Jones, The Compleat Turner
May 11, 2016 · 486 views

Bill Jones continues his demonstration and lecture at the 2001 Utah Woodturners Symposium.

 

BILL JONES IVORY TURNER - CLIP 02
By: Bill Jones, The Compleat Turner
April 28, 2016 · 788 views

'His overheads were negligible, His wants were few, and such a man who enjoys his work is wealthiest of all.' Bill Jones. He was the last of 5 generations of a family of 'Hardwood and Ivory' turners. This is the second in the Bill Jones demonstration videos from the Utah Turners Symposium 2001. Shot with a hand held camera from the audience. I apologize for the shaky movement. This is unedited video presented as it was taken. Although, Bill made his living as a 'bone grubber and ivory and hardwood turner' he adapted to modern times. He was very sensitive to the destruction of elephants and

 

BILL JONES IVORY TURNER - CLIP 01
By: Bill Jones, The Compleat Turner
April 22, 2016 · 1,636 views

Bill Jones was the last of 5 generations of 'bone grubbers.' Bone, Hardwood and Ivory turners - the very top of the turning professions. By 'hardwood' they didn't mean deciduous trees. They meant HARD woods like African Blackwood, Pink Ivory, Ebony, etc. This is the first clip from about one hour of video I taped at the Utah Woodturners Symposium in 2001. It was accomplished by simply hand holding a camera as I sat mesmerized in the audience. Bill did know I was taping, but we did not plan any presentation especially for the camera. This is live footage presented raw and unedited. It is the only video I have of Bill Jones working at the lathe. I will post the remainder of the tape in these small segments for your enjoyment and instruction. Bill was a special friend of mine. Many thanks to Bill's daughter Ginette for permission to upload these clips to Youtube. Tim Inman

 

Woodturning a (Pain In the Ass, Waste Of Money) Cell phone into a candle holder
By: Templeboy Turnings
April 17, 2016 · 4,178 views

My Cell phone annoyed me for the last time on Saturday, I've only had it a short while and it gave me nothing but grief from day one !!! So I bought a new one and had a bit of fun destroying the old one !! Warning !!! Putting electrical devices on a spinning lathe is dangerous, I did this with full safety equipment and in a safe manner staying out of the line of fire....... Do not attempt to copy !! Thank you for watching, please like, comment, share and subscribe,,,,, Until next time, stay safe !! Steve.

 

Turning Polymer Clay Tops
By: Walter Wager
April 09, 2016 · 4,239 views

Video shows how to make a turned top using polymer clay, and a disk for it to spin on.

 

Antler tip part two
By: micpen22
March 31, 2016 · 74 views

Finished results of drilling antler

 

Antler tip 1st half
By: micpen22
March 31, 2016 · 91 views

How I drill antlers

 

Kydex for the Wood Turner
By: The Wood Whirler
March 18, 2016 · 1,517 views

Even Wood Turners can find uses for Kydex/thermoplastic.

 

Rick Orr Elk Antler Boxes
By: Rocky Mountain Woodturners
March 13, 2016 · 2,682 views

Rick Orr demonstrates turning Elk antler boxes to the Rocky Mountain Woodturners on March 3, 2016.

 

How I make corian Pendents
By: Woody Turner
February 20, 2016 · 1,492 views

Produced with CyberLink PowerDirector 14

 

H.D.P.E.
By: Carl Jacobson
February 06, 2016 · 22,090 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII This is what a plastic Folgers, Gain laundry, and a protein powder container looks like melted together. I melted it down in a toaster oven in the shop.........Make sure you have plenty of ventilation. I cooked it on 350 don't use the broil setting it will burn. Did I mention PLENTY of ventilation......... If you make this project I'd really like to see it, you can always share your projects on my website. Here's a link to some of the tools I used in this vide

 

How To Make An Acrylic Ring Using Corian
By: Zebrano Wood Craft
January 09, 2016 · 17,275 views

In this video I demonstrate my process for creating an acrylic ring. I am using Corian samples and my lathe to turn a unique piece of jewellery. Corian is an acrylic like material that is very easy to work with using standard wood working tools. It comes in a variety of colours and patterns and is popular among wood turners. Corian is widely available and inexpensive off-cuts or samples can often be found on Ebay. I've included links to Ebay suppliers of Corian below*: US: http://ebay.to/217tzSl UK: http://ebay.to/1KBDmc4 *I am a member of the Ebay partner network so by using my link t

 

Turning Automotive Paint
By: Carl Jacobson
December 07, 2015 · 62,570 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII In this video I demonstrate how to turn automotive paint on the lathe. It's Also know as Fordite/Detroit agate, It's over spray that builds up on the racks in a paint booth. I love recycling this waste paint into something unique. Tim Sway https://www.youtube.com/watch?v SRAyRLLbC1Q Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodwork

 

Turning Aluminum
By: Carl Jacobson
April 20, 2015 · 240,445 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII I cast these aluminum pieces in epoxy resin, and turned it on the lathe. The aluminum turned out much better than I thought. I'm going to make it into a gear shift. The Easy Wood Tools worked better than the gouges on this. Ted Alexanderer https://www.youtube.com/user/TedCAlexander/featured Jason at GP woodworks https://www.youtube.com/channel/UC3GX1pSgVXdKPeIHP2l2imw I upload a new project video every Friday. Thank you for supporting free woodworking

 

Seed pod marble 2
By: Lou VanDyne
March 07, 2015 · 33 views

Turning an oak seed pod thats in Alumilite.

 

M&M's on the lathe
By: Lou VanDyne
January 29, 2015 · 38 views

Went from M&Ms to pennies.

 

Alabaster Follow-up
By: Carl Jacobson
January 19, 2015 · 5,726 views

Get a good dust collector if you're thing about turning Alabaster, it's a must........ I upload a new project video every Friday. Thank you for supporting free woodworking videos. Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits https://www.chefwarekits.com/?tracking carl Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/1618929405

 

Acrylic Drilling Test
By: RJBWoodTurner
August 22, 2014 · 1,684 views

Acrylic Drilling Test After my Acrylic videos the other day, I got an idea that I thought might work to reduce the blow out while drilling Acrylic Blanks. The way it works is, I sandwich a piece of wood below the blank in the vice and clamp the two tightly against each other. When the bit gets to the bottom of the blank there is still resistance so it drills through and into the wood reducing the blow out. I discuss how all 5 types of the blanks I used in the first videos performed. Shout Outs: Bob Rawson https://www.youtube.com/user/PlaustrumWoodworking/ Regards, Bob

 

Turning Polyester Resin on a lathe static cling removal.
By: Chad Schimmel
July 25, 2014 · 6,011 views

IF you like the video give it a thumbs up and don't forget to subscribe to the channel. Featured Vendor, Fastcap. Everything you need. Www.fastcap.com I use molds from Fred Wissen at http://www.ptownsubbie.com If you are looking for custom pen blanks that I made please check out my ebay store at http://www.ebay.com/sch/schimmelsdust/m.html?item 201012656910&rt nc&_trksid p2047675.l2562 For finished pens made by Chad Schimmel visit www.impeccablepen.com Be sure and subscribe for new videos every Friday.

 

Porous Antler
By: RJBWoodTurner
July 22, 2014 · 4,797 views

Porous Antler In the last video I made, 'Preparing Antler to Make Pen Blanks' I received a question from a friend and colleague, Fredrik J. Fredrik has some Moose Antler he is considering making a pen from but it has a porous marrow center. He was wondering if there was anything he could do to fill the pores and make the antler usable. In this video, I show what I do to help correct the issue. I am sure there are many methods, this is just what I have figured out and it has worked for me. Regards, Bob

 

Lathe Turning PVC Material into a Decorative Spire -Lathe
By: Century Porch Post
May 27, 2014 · 1,875 views

We have turned hundreds or PVC turnings. Here is just one. :)

 

Crushing Stone for Cholla and Turquoise Pen Making. DIY
By: Chad Schimmel
September 28, 2013 · 4,682 views

This video shows a quick DIY way to crush all kinds of stones and rocks for crafts and other needs. Can be used in inlays, Pen making, Tables and so much more. If you are looking for great custom pen blanks and pen kits and parts please check out my ebay store at http://www.ebay.com/sch/schimmelsdust/m.html?item 201012656910&rt nc&_trksid p2047675.l2562 For and easier more effective use, place it on a work bench and its much easier than holding. Thanks for watching, Please subscribe to the channel.

 

NEFWA August 2012 Turning Plywood
By: North East Florida Woodturners Association
November 23, 2012 · 3,154 views

Turning Plywood Demonstration of turning plywood by Bob Hunt at the August 2012 meeting of the Northeast Florida Woodturners Association.

 

Acrylic
By: dashrocket
June 25, 2012 · 919 views

Pen

 

Clay 2
By: dashrocket
June 13, 2012 · 223 views

Cp

 

Clay 2
By: dashrocket
June 13, 2012 · 206 views

Cp

 

Clay 1
By: dashrocket
June 13, 2012 · 336 views

Cp

 

Turning Plastic / PVC Composite
By: Century Porch Post
July 07, 2011 · 14,994 views

turning, lathe cnc

 

# 78 Working with Corian
By: Cap'n Eddie Castelin
April 16, 2011 · 87,339 views

Turning corian with regular tools and a brand new tool from Big Guy Productions.

 

#77 Corian Basics
By: Cap'n Eddie Castelin
April 15, 2011 · 236,305 views

How to prep corian solid surface product for turning. Next part will address turning tools and techniques

 

Drechseln mit Alabaster Video 1
By: johann340
July 28, 2010 · 3,471 views

Ich besuchte bei meinem Italienurlaub eine Drechslerei

 

Drechseln mit Alabaster Video 2
By: johann340
July 28, 2010 · 3,125 views

Ein Italienischer Drechslerkollege, zeigte uns seine Werkstatt und das geschickte umgehen mit den verschiedenen Speziell angeschliffenem Werkzeugen.

 

Woodturning Turning Automotive Paint
By: Carl Jacobson
February 18, 2010 · 1,489,032 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII In this video I turned a finial out of automotive paint. This stuff is also known as Fordite/Detroit Agate, It a build-up of overspray in automotive paint booths. Jewelry makers use this to make very unique pieces. I put together a list of some of the tools I use in my shop (affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link: https://www.amazon.com/shop/thewoodshoptv THANK YOU FOR SUPPORTING

 

Drechselkurse mit Bernstein und Alabasta. Kurse von Johann Deutsch
By: johann340
November 29, 2009 · 2,251 views

Drechslertage und Drechsler-Ausstellung in Kuchl Salzburg. Drechselkurse mit Bernstein und Alabasta auch Special Drechselkurse mit Johann Deutsch. Holzbearbeitung, Drechseln: Ausbau & Polieren ein Bowl: Walnut Oil Finish für Greenwood Drehspäne

 

Prepping Corian for Turning
By: Cap'n Eddie Castelin
February 16, 2009 · 20,611 views

How to prep Corian samples to make turning blanks for pens, stoppers, accent pieces, clocks, etc.

 

Return to Turning Videos

Powered by Google

Great Bargains


Trend Diamond Abrasive Lapping Fluid

On Sale for only $12.99

Save $2.03

List price: $15.02

Click here for more information or to purchase


Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat

On Sale for only $32.79

Save $3.65

List Price: $36.44

Click here for more information or to purchase

 


NOVA G3 Reversible Wood Turning Chuck

For only $107.50

Save $52.49

List Price: $159.99

Click here for more information or to purchase


Easy Wood Tools COMBO: Easy Start Rougher, Finisher, Detailer

On Sale for only $145.77

Save $34.20

List Price: $179.97

Click here for more information or to purchase

 


Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Sheffield Woodturning
Woodturning Online
From Walnut to Antlers

(Click any Ad to go to our Sponsor's Website)