Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Reviews Videos (19)

Sort by

Or click here to: Search All Videos


The New Woodturning Videos Published in November 2018
By: RickTurns
December 06, 2018 · 1,498 views

At the beginning of every month, I produce a list of the woodturning videos that were published on YouTube in the previous month. This list is built from data that I have extracted from YouTube via the YouTube Data API; I began collecting data at the beginning of 2016. I run my data extraction program 3-5 times each month, then ensure that the videos captured are correctly classified as 'woodturning' or 'anything else'. After that, I assign the woodturning videos to categories based on the subjects of the videos. Along the way, I also capture information on the YouTube channels devoted to wood

 

Tools for Turners
By: woodturningwithtim1
November 09, 2018 · 7,901 views

Tim shows you the various tools and equipment he uses in his (small) shop. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://wtwtim.com/robustlathes.htm I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

The New Woodturning Videos Published in October 2018
By: RickTurns
November 03, 2018 · 1,588 views

At the beginning of every month, I produce a list of the woodturning videos that were published on YouTube in the previous month. This list is built from data that I have extracted from YouTube via the YouTube Data API; I began collecting data at the beginning of 2016. I run my data extraction program 3-5 times each month, then ensure that the videos captured are correctly classified as 'woodturning' or 'anything else'. After that, I assign the woodturning videos to categories based on the subjects of the videos. Along the way, I also capture information on the YouTube channels devoted to wood

 

Richard Raffan Turning Boxes Book Review Episode 2 (green wood boxmaking stock and rough turning)
By: Sawdust and Shavings
July 18, 2018 · 125 views

This is episode 2 of my Richard Raffan Turning Boxes book review in this video I'll be discussing the techniques that I learned from the book on how to make turning stock from Green Timber and rough turn boxes for drying to finish turned later. It's very similar to rough turning bowl blanks. I'm not a professional Turner this video is me explaining the things I learned from the book, and not a how to. This is meant as an inspirational and entertainment video. I can also be found in Facebook https:/www.facebook.com/qswwllc Instagram https:/www.instagram.com/johnboybaker1985 and selling on Etsy https://etsy.me/2LBiZh2

 

Richard Raffan Turning Boxes exercise (1st book review in series)
By: Sawdust and Shavings
July 11, 2018 · 312 views

Thought I would talk a little bit about education and work an exercise from the latest book that I just finish reading which was Richard Raffan 'Turning Boxes'. Which was practicing by turning solid forms that will give practice on making clean cuts and can be used as silhouettes for later reference. I know it's a little more of a vlog than what my normal videos are I hope you don't mind and take away something. 5 minute goblet challenge https://youtu.be/hQY5C6hZpr4 I'm not a professional Turner this video is me explaining the things I learned from the book, and not a how to. This is meant as an inspirational and entertainment video. As well as giving some information on where to find books and other resources to further your education. I can also be found in Facebook https:/www.facebook.com/qswwllc Instagram https:/www.instagram.com/johnboybaker1985 and selling on Etsy https://www.etsy.com/shop/qsww

 

Tool Review for Jamieson torque aresting handle
By: Lyle Jamieson
April 03, 2018 · 613 views

This is the heart of my hollowing system. The handle supports the cutting action and prevents catches or twisting and torqueing forces. This allows the fingertip control I want for easy, accurate, and safe hollowing. Please see my website for all the resources and tool store. Every tool listed has more information details. See not only the right tools but tips and techniques on how to use them. I have archived my articles written for publications and each of my newsletter broadcasts have all the Q&As listed by topic and indexed table of contents. Don't forget to subscribe here for the YouTube videos. Please support my sponsors Mike Hunter tools and Doug Thompson tools. https://lylejamieson.com

 

The Woodturning (videos) Year in Review: 2017
By: RickTurns
January 08, 2018 · 1,025 views

How many woodturning videos were published on YouTube in 2017? How many new woodturning channels were started? Which video has the highest number of views? Which channel had the most videos, and the most views? The answer to these and many more obscure questions are answered in this video. Link to PDF 'Summary Data for 2017': http://bit.ly/2qGW3XM Link to PDF 'Woodturning Channels with 2017 Summary Data by Total Views': http://bit.ly/2ACWXUC Link to PDF 'Woodturning Channels with 2017 Summary Data by Total Videos': http://bit.ly/2COj8xj Link to PDF 'Woodturning channels created in 2017':

 

A New Tool Rest Under the Sun!!
By: RickTurns
November 08, 2017 · 9,575 views

The Double 9 D is a new style of tool rest...a single rod of 1' steel stamped into a shape with two 90 degree bends. I test it out on bowls and spindles. 1/5/17 - Joe just released a new video where he's using the Double 9 D to turn a bowl. Here's a link to that video: http://bit.ly/2E9xjJn Like all tools, the Double 9 D has its areas where it excels and areas where it doesn't; if you'd like to skip all the detail on what I tested, advance to position 16:26 in the video for my summary of the Double 9 D's good points. Link to Double 9 D video by the inventor: http://bit.ly/2BxeBuC Link to purchase the Double 9 D: http://etsy.me/2zu2bW3 The music during the close of the video, Happy Little Elves by Audionautix, is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Nova Comet II Midi Lathe Review (Plus Lathe Dust Collection)
By: Casey Martin
November 06, 2017 · 9,923 views

The Pinecone Pen video is coming!!! Like this video if you're excited to see it. Tools I Use: https://winecountrywoodworks.com/tools-i-use/ Technical specs of the lathe:http://www.teknatool.com/product/nova-comet-ii-midi-lathe/ Dust collection: http://www.rockler.com/dust-right-lathe-dust-collection-system My pen blanks: https://winecountrywoodworks.com OR https://www.etsy.com/shop/winecountrywoodwork My email: casey@winecountrypens.com

 

Naked Turner Carter And Son
By: Erik Anderson
October 01, 2017 · 1,816 views

Quick look at Carter And Son tools my wife got me. - - - - - - Please watch: 'Miter Box Pen' https://www.youtube.com/watch?v iefENj4JGJw - - - - - -

 

First Use Of The Dewalt Flexvolt 60v Electric Chainsaw (part 1)
By: Myers Woodshop
August 09, 2017 · 7,542 views

Here's part 1 of 2 on my journey to a tiny Alaskan chainsaw mill. Here's my first use of the Dewalt Flexvolt 60v chainsaw. In part 2 I attach an Alaskan chainsaw mill and attempt to make some (small) slabs. The Chainsaw: http://amzn.to/2A4f8pC The Granberg Mill: http://amzn.to/2zjwb3V Flexvolt Batteries: http://amzn.to/2Bk0qJB FILMING GEAR Panasonic Lumix (main camera) : http://amzn.to/2BVA9nH Rode Microphone : http://amzn.to/2HQxdcv GoPro Hero 5 Black : http://amzn.to/2CMWi43 Neewer 62'/158cm Camera Tripod : http://amzn.to/2COtEQo Neewer 31.5'/80cm Camera Track Dolly Slider Rail System : http://amzn.to/2BTKJv7 Find Me On The Internet: Instagram http://www.instagram.com/myerswoodshop @myerswoodshop Facebook https://www.facebook.com/myerswoodshop Website http://www.myerswoodshop.com Etsy http://www.etsy.com/shop/benmyerswoodshop Music: www.bensound.com

 

An Oak Bowl
By: RickTurns
May 02, 2017 · 4,178 views

This is a bowl turned from fresh oak. The wood has only been down 2-3 months, and therefore, warps during turning and finishing. The bowl is finished with a wiping varnish and then buffed with carnauba wax.

 

Diamond Sharpening Card Review
By: Jake Webb
March 23, 2017 · 1,292 views

A few thoughts on using Trend diamond sharpening cards with my woodturning tools. My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

Brilliant Finishes for Woodturners Trailer
By: Ted Sokolowski
December 27, 2016 · 43,444 views

An overview of the Briliant Finishes for Woodturners DVD by Ted Sokolowski

 

Rikon 1 Horse Grinder vs Rikon 1/2 Horse comparison Test
By: Ken Rizza
November 23, 2016 · 5,602 views

Wood Turners Wonders is now stocking Rikon 1 horse and 1/2 horse bench grinders. Here is a short video comparing the two. Check out our website at woodturnerswonders.com

 

Axminster HBS200N Hobby Series Bandsaw
By: Axminster Tools & Machinery
July 04, 2016 · 39,662 views

The Axminster Hobby Series HBS200N bandsaw is our smallest model, designed for bench use. It may be small but it still features a welded steel chassis and a cast iron table for strength and stability. It is as simple as it gets, with a direct drive motor and balanced cast alloy wheels. Taking blades from 6-13mm, it has copper blade guides and ball bearing thrust guides which combine to control the blade very well to allow thin slices to be cut for veneer work. The top guide even has a rack and pinion height control. The top wheel is mounted in a welded steel sub frame, with blade tensionin

 

How Has My Dust Deputy Been Performing
By: RJBWoodTurner
July 03, 2016 · 2,296 views

Since I posted my Dust Deputy video I have been asked many times how it's working for me. I wanted to take a few minutes and show you how its been working. Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

A close up look at the Robert Sorby 67HS Turning 6 Piece Tool Set
By: Olivers Woodturning
September 29, 2014 · 2,250 views

This is the Robert Sorby 67HS Turning 6 Piece Tool Set. A high end, flagship woodturning tool set. For more info please visit https://www.oliverswoodturning.co.uk/product/67hs-6-piece-turning-tool-set

 

My Review of the Carter & Son Toolworks Lathe tools
By: Bob Hamilton
February 03, 2014 · 11,283 views

I have had the opportunity to try out some new lathe tools produced by Carter & Son Toolworks out of Seattle, Washington: http://carterandsontoolworks.com/ The tools arrived ready to use right out of the package and were a delight to use. My thanks to Valerie and Paul for giving me the opportunity to test these tools.

 

Return to Turning Videos

Powered by Google

Great Bargains


Excelsior Mini Lathe with 3-Piece Rockler Carbide Pen Turning Tool Set

On Sale for only $299.99

Save $139.99

List price: $439.98

Click here for more information or to purchase

 


Nova 30th Anniversary G3 Reversible Chuck Bundle with 3 Jaw Sets and Case

On Sale for only $159.99

Save $20.00

List Price: $179.99

Click here for more information or to purchase

 


M2 Mesh Face Masks with Bonus 3-Pack HEPA Filters

On Sale for only $34.95

Save $9.95

List Price: $44.90

Click here for more information or to purchase

 


Spectraply 10-Piece Bottle Stopper Blank Variety Pack

For only $14.99

Save $5.00

List Price: $19.99

Click here for more information or to purchase


Double Sided Turner's Tape

For only $14.99

Save $5.00

List Price: $19.99

Click here for more information or to purchase


Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Cindy Drozda
From Walnut to Antlers
Arizona Carbide

(Click any Ad to go to our Sponsor's Website)