Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Handles Videos (50)

Sort by

Or click here to: Search All Videos


Make a Screwdriver Handle
By: Mike Peace Woodturning
April 05, 2019 · 1,978 views

I show how to make a screwdriver handle on a wood lathe. I use a cheap Harbor Freight 4 in 1 screwdriver and wood turn a custom handle. This is a simple turning project and makes a great gift for anyone that uses a screwdriver – which is just about anyone. I upload new wood turning videos regularly so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Woodturning - I make a toilet flush handle - DIY
By: Nick Zammeti
January 26, 2018 · 16,470 views

I made a toilet flush handle from wood. Using my lathe i woodturn the handle to customize it for my bathroom. A little bit of DIY. MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-

 

Woodturning a handle for a big Stubai gouge
By: Andrea Zanini
October 24, 2016 · 1,091 views

I had this 25mm Stubai gouge sitting around for a while. In this video I show how to turn a long oak handle for heavy duty work. follow me on facebook https://www.facebook.com/zaniniwoodcarving/ follow me on Instagram https://www.instagram.com/andreazanini464/ music by http://www.bensound.com/royalty-free-music

 

Upgrading a Log Turner
By: SP Wood Art
October 01, 2016 · 942 views

Over the summer I recently noticed that when I join my neighbors at their fire pit that the log turner (fire poker) was a little short and uncomfortable to use. I made it my mission to upgrade their log turner. This is a fun shop project and similar to making tool handles. If you would like see more of SP Wood Art visit us at: www.spwoodart.com Our Webpage www.facebook.com/spwoodart www.plus.google.com/ SPWoodArt1/about www.pinterest.com/spwoodart/ I strive to create handmade, high quality wood pieces (and sometimes, crafts using other mediums such as natural stone or acrylic) that connect t

 

Bill Rogers Turns A Tool Handle
By: IKI Woodturners
August 18, 2016 · 174 views

IKI August 14th, 2016 Meeting. Bill Rogers demonstrates turning a tool handle.

 

Great Skill Building Project For Woodturners
By: Carl Jacobson
August 12, 2016 · 11,904 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg Starter projects for woodturners! When you’re getting started with woodturning, it’s natural to look for projects that are easy to complete while still teaching basic lathe skills. Workshop projects like chisel handles are a great place to start, but when you’re ready to make items suitable for use in your home, utensil handles are a great project for new woodturners. Tools I used in the video- Robust Lathe: http://thewoodshop.tv/robust-lathe/ Ruth Niles Mandrel-http://astore.amazon.com/thewood0c-

 

How to make handles for tools with and without a chuck
By: Wood Frontier
June 28, 2016 · 4,625 views

Making handles for tools is fun and easy on the lathe. I show you how to make file handles out of wood in this video. In this short video, I show you two different ways to make small tool handles on your wood lathe. In the first method, I show how I used a scroll chuck without smaller jaws. The second method shows how you can make a taper template jig that allows you to fit your turning piece directly into the headstock. I decided to make some better handles for these cheap files. I bought the set for around 7 and expected their lifespan to be limited to the immediate project. However

 

New Thompson shallow flute detail gouge and a dyed handle
By: yak branson
February 05, 2016 · 504 views

Handle for my new Thompsons shallow flute detail gouge. Handle dyed green for a lil extra bling.

 

Reed Gray aka Robo Hippy PUTTING SQUARE TANG TOOLS INTO SQUARE HANDLES
By: robohippy
January 30, 2016 · 11,924 views

Robo Hippy walks through his methods of creating a custom made wood handle.

 

Cheezy Platter: Turning the knife handle
By: Don Kleinschnitz Jr.
December 24, 2015 · 1,724 views

 

#8 making a wooden hatchet handle
By: Woodslee Summercraft
November 01, 2015 · 308 views

replicating an old hatchet handle for a work mate

 

Woodturning Stanley #90 Restoration
By: Custom Chris
September 25, 2015 · 3,545 views

Come to my Etsy Store and get a hand made Aluminum Tool Handle https://www.etsy.com/shop/CustomChrisWoodworks For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Turned Handle for Hock Burnisher
By: Barry's Workshop
September 05, 2015 · 311 views

In this video, I grab a piece of oak from the firewood rack and turn it into a handle for a Hock Burnisher. The burnisher is used to put a burr on a card scraper. I also created a video where I made the card scraper from an old hand saw: https://www.youtube.com/watch?v uO7BYwQ0ibg Music is written by Kenny Dorham, performed by Barry.

 

Woodturning: A File Handle
By: Roundabout Woodworks
July 15, 2015 · 33,893 views

All your files should have a handle. This is how I make mine.

 

Turning A Tool Handle With Adapter
By: Gord Rock
June 18, 2015 · 1,781 views

Turning a wooden handle to use with an adapter to fit a rectangular tang on a Cindy Drozda Signature Negative Rake Square Recess Scraper.

 

Woodturning Bowl Gouge Tool Handle
By: Cip's Wood Chips
May 28, 2015 · 4,759 views

I purchase the tip for this tool from the estate of a member of our woodturners club. The wood for the handle came from a table leg.

 

Woodturning Tool Handle in 4 mins
By: Custom Chris
May 10, 2015 · 2,767 views

Come to my Etsy Store and get a hand made Aluminum Tool Handle https://www.etsy.com/shop/CustomChrisWoodworks For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Woodturning Beer Tap Handles for a Microbrewery
By: James Wegner
April 06, 2015 · 8,642 views

Taking a short break from my woodturning a Chess Set series to make some beer tap handles for my son who is a microbrewer. Enjoy!

 

Woodturning Aluminum Tool Handle short video
By: Custom Chris
March 01, 2015 · 2,371 views

Short video for the new channel and a look at the new handles Build Video https://www.youtube.com/watch?v IiJDc9PQxsI Come to my Etsy Store and get a hand made Aluminum Tool Handle https://www.etsy.com/shop/CustomChrisWoodworks For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Driving a brass beer tap handle insert
By: George Fotinakes
February 14, 2015 · 14,537 views

There are many ways to drive a threaded brass beer tap insert (I think I tried all of them) This is the easiest way and it only takes about 2 minutes!

 

A Handle for a Tenon Cutter
By: RickTurns
January 28, 2015 · 19,013 views

Woodturning: Turning a handle for a wrenched tenon cutter. Making a tenon cutter from a wrench is demonstrated in this video: https://www.youtube.com/watch?v BJDy3-hYf9w

 

Not so fancy tool handle.
By: Adze Woodturning
January 23, 2015 · 327 views

Woodturning a Walnut tool handle for a new bowl gouge.

 

Banksia Tap Handle
By: George Fotinakes
January 19, 2015 · 1,416 views

Wood lathe techniques using Banksia pods to form a unique beer tap handle.

 

Turning a Tool Handle for a TURNING Tool 2 of 2
By: WYOMINGWOODTURNER
January 15, 2015 · 11,293 views

Making a Tool Handle: In part 2, Sam continues to drill the recess for his tool. He shapes the handle with a SRG and a skew chisel, sands and finishes the project with tung oil.

 

Turning a Tool Handle for a Turning Tool 1 of 2
By: WYOMINGWOODTURNER
January 15, 2015 · 18,796 views

Making a Tool Handle: In this first part--Sam Angelo shows some of his hand crafted handles and progresses to the point of drilling out the handle for the tool. The project continues in 2 of 2.

 

Making a woodworking bench vise handle on the lathe
By: Jake Gevorgian
December 27, 2014 · 4,090 views

Please feel free to comment and ask questions. Music by Darkside, recoded live in Seattle at KEXP listener supporter Radio Station. Please support these folks and check out their channel on YouTube.

 

How to Make Wooden Screw Driver Handles.
By: Chris Pine
December 05, 2014 · 113,461 views

How to make a wood Screw Driver Handle. I am making some wooden handles for a six function screwdriver as Christmas gifts for some family members. Alan Stratton made some similar ones not too long back. This quick and fairly easy project will make great gifts. This is a lot of fun and would be a great beginner turning project! Please join me today in the workshop! As Wood Turns video of Multi Axis handle: http://youtu.be/vnf_MCs1Mr0?list UUucYlCYbbf1ZDGO-7OjKl5w My info: http://www.youtube.com/user/TheChrisPineWorkshop http:/thechrispineworkshop.com Facebook: https://www.facebook.com/pages/I-Wish-I-was-Home-Productions/176321852397752 https://www.keek.com/dashboard/content http://www.pinterest.com/christopherpine/woodworking-projects

 

A cane handle with a pineapple twist
By: Frank B
December 03, 2014 · 92 views

 

A New Tool Handle
By: Custom Chris
December 01, 2014 · 3,414 views

https://www.kickstarter.com/projects/2046422509/common-man-wood-turning-tools Think of the Kick Starter as a kinda as pre-ordering The side on the right of the Kick Starter is where you can give funds and the where you can see what rewards come with that funding amount. For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Woodturning Hatchet Handle
By: Custom Chris
July 28, 2014 · 3,389 views

Trying out making a hatchet handle on the wood lathe.

 

File Handle That I Made
By: John Bare
July 03, 2014 · 296 views

I turned some Mahogany into a small file handle and used a brass pipe fitting tor the ferrule.

 

WOODTURNERS TOOL HANDLE
By: Robbiethewoodturner
June 19, 2014 · 26,553 views

Erik Anderson https://www.youtube.com/user/KireOgerNosredna Here is my latest project a WOODTURNERS CHUCK TOOL HANDLE

 

Woodturning: Recessed door handle for sliding doors
By: duunari81
June 11, 2014 · 3,008 views

Recessed door handle for sliding doors. Material is teak wood.

 

More tap handle fun for Refuge Brewery
By: Kyle Toth
May 30, 2014 · 3,566 views

100 more tap handles

 

Wood turning a handle to a Crock Pot lid.
By: Turning Round
April 06, 2014 · 751 views

In this short video I show the steps I take to turn a handle for the top of the glass lid on my crock pot.

 

Turning a Tool Handle for a wood turning scraper
By: Turning Round
February 27, 2014 · 1,656 views

In this video I turn a piece of ash into a nice tool handle for a scraper. Using my wood lathe I will show all the steps to turning a tool handle for use with my lathe. It is a simple process and can save you a lot of money buying only the tool tip. Or you cna easily replace the handle on an older tool and give it new life.

 

Turning the Handle for a Shoehorn
By: Eugen Schlaak
March 08, 2013 · 2,495 views

This is a presentation showing in detail on how to make a shoe horn handle on a woodturning lathe. It is a perfect turning exercise for the novice wood turner using the skew. The brass fitting is available from Penn State Industries and various other Suppliers

 

Making a New Handle for a Chef's Knife
By: turnersgold
July 24, 2012 · 18,226 views

'A Turner's Gold, Wood Works and Arts' presents the basic techniques used to create a new personalized handle for a Santoku Chef's knife. This Project was a gift and contains an exotic Wenge Wood, Stone Inlay.

 

Self Made Woodturning Handles in Action
By: Jake Gevorgian
February 26, 2012 · 4,327 views

FOR THOSE OF YOU WHO CANNOT SEE THIS VIDEO ON IPHONE OR IPAD YOUTUBE APP, PLEASE OPEN YOUR SAFARI WEB BROWSER AND REVISIT THIS VIDEO TO BE ABLE TO PLAY IT. Sturart King's YouTube channel is at: http://www.youtube.com/user/cesking/videos

 

The Tool Handle Making Process
By: Jake Gevorgian
February 25, 2012 · 82,257 views

woodturning tool handle

 

# 111 handle basics
By: Cap'n Eddie Castelin
January 01, 2012 · 43,327 views

I make a double-handed handle for one of my cutter bars, per your request.

 

Making Handles for my Woodturning Chisels (50% Complete)
By: Jake Gevorgian
August 15, 2011 · 19,680 views

In this video I'm making a handle, a part of a set of 5 handles, which will replace my old Delta woodturning chisel handles. This is not a tutorial. I'm just sharing this video with my friends and everyone who may have similar ideas.

 

75 tool handle.avi
By: Cap'n Eddie Castelin
April 05, 2011 · 28,498 views

A basic toolhandle, with some tips on how to prep, turn and finish.

 

Tool handle segment 5
By: Bob Hamilton
June 09, 2009 · 6,013 views

Turning a tool handle from a piece of dogwood. Apologies for forgetting to relocate the camera so much of the action is off screen in this segment.

 

Tool handle segment 4 of 5
By: Bob Hamilton
June 09, 2009 · 9,099 views

Turning a tool handle from a piece of dogwood.

 

Tool handle segment 3 of 5
By: Bob Hamilton
June 09, 2009 · 6,900 views

Turning a tool handle from a piece of dogwood.

 

Tool handle segment 2 of 5
By: Bob Hamilton
June 09, 2009 · 7,741 views

Turning a tool handle from a piece of dogwood.

 

Tool handle segment 1 of 5
By: Bob Hamilton
June 08, 2009 · 12,700 views

I needed a handle for a new 1/2' spindle gouge so I decided to run the camera while I was making it. The wood I used is dogwood.

 

Make an Aluminum Tool Handle
By: Cap'n Eddie Castelin
February 04, 2009 · 26,455 views

Make a tool handle for your hollowing turning tools, specialty tools, etc.

 

Making an Oval wooden handle with Robert Sorby Stebcentres
By: Robert Sorby
February 29, 2008 · 91,364 views

Making an Oval wooden handle with Robert Sorby Stebcentres These revolutionary wood lathe drives are an essential addition to every turner's toolkit. Made under licence (Patent 2286138), their design incorporates not just a spring loaded point in stainless steel but also a set of razor sharp teeth which bite into the workpiece. For the novice turner this offers added security. By winding in the tail stock the degree of bite can be varied and the centre point firmly located. In the unfortunate case of a dig-in arising the workpiece simply stops revolving rather than kick back the turning chisel. This allows the beginner to use his skew chisel with a degree of confidence.

 

Return to Turning Videos

Great Bargains
(ends May 30, 2019)


Stainless Steel Pizza Cutter Turning Kit

On Sale for only $14.99

Save $5.00

List price: $19.99

Cut any pizza quickly and with ease! Robust, well-balanced hardware 3X the weight of competing cutters and a sharp 4" diameter stainless steel blade make this kit a must have for pizza lovers. Simply make your own creative handle (not included) to complete your cutter with personalized flair. Kit includes a 5/16" threaded insert to attach the handle and to remove it for dishwasher cleaning.

Click here for more information or to purchase

 


Pizza/Pie Slice Server Turning Kit

On Sale for only $12.99

Save $5.00

List Price: $17.99

The server makes the perfect companion for our Pizza Cutter Turning Kit (above, sold separately). Made from food-grade 304 stainless steel and attached to the handle (you turn) with an included 1/4-20 threaded insert.

Click here for more information or to purchase

 


Workbench Casters, 4 Pack

On Sale for only $59.99

Save $20.00

List Price: $79.99

This set of four easy-spin 2-3/8" urethane casters feature a foot-activated lift mechanism that engages or disengages with the touch of your toe. Engage them to lift your bench 3/4" off the floor for mobility, disengage them for stability. Each caster is constructed of durable steel and rated for 100 lbs. - that's 400 lbs. of total capacity with the 4-pc. set!

Click here for more information or to purchase


Nova Mini Jaws Package

For only $139.99

Save $24.00

List Price: $163.99

Get the complete suite of Nova mini jaws in one cost-saving package! The bundle consists of four sets of jaws: the Nova Mini 20mm Jaws, Nova Mini Spigot Jaws, Nova Mini Step Jaws and Nova 70mm Jaws. All are ideal for use with the Nova Precision Midi Chuck (#47447, sold separately) mounted on a mini or midi lathe. However, they also work on the larger Nova chucks, and with larger lathes.

Click here for more information or to purchase


Dust Right® Dust Separator

On Sale for only $59.99

Save $40.00

List Price: $99.99

Turn any shop vacuum with a 2-1/4'' ID outlet into a 2-stage dust and chip separator. When used with most power tools and shop vacuums, the Dust Right® Separator captures sawdust, wood chips, and other debris before it enters your vacuum, preventing the loss of suction power caused by a clogged vacuum filter. The five-caster base makes it exceptionally stable and easy to maneuver around the shop. Plus, hoses connect inside the in/out ports, preventing unintentional disconnections. The Dust Right® Separator creates a cyclonic air flow that causes most wood dust particles and other materials that are heavier than air to separate, preventing them from being passed to the vacuum. The vortex effect that is created prevents the loss of suction caused by prematurely clogged filters

Click here for more information or to purchase


Micro Dust Air Filtration System

On Sale for only $599.99

Save $100.00

List Price: $699.99

The PM1250 Air Filtration System employs an electrostatic filter that attracts and removes particles as small as 0.1 micron in size. It cycles the air in a 680 square foot space—the equivalent of an oversized 2-car garage—up to five times in a single hour. When set at the lowest setting, the system is about as quiet as a library, and when on high, it's quieter than normal conversation. Unlike most other air filtration systems, the PM1250 is portable and freestanding, meaning you can carry it to wherever filtration is most needed, then simply set it on the floor or the bench. The angle is adjustable using the knobs on the side of the unit. If you like, it can also be mounted to the wall or ceiling.

Click here for more information or to purchase


Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Stainless Steel Bottle Stoppers
Woodturning Online
Robust Tools

(Click any Ad to go to our Sponsor's Website)