Woodturning Online Videos

Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Making Tool Categories


Tool Handles Videos (116)

Sort by

Or click here to: Search All Videos

How To Make Wood Handles for Wood Lathe Tools ·
By: Scott Parat
November 26, 2017 · 10 views

http://www.woodturningbasics.com/turning-handles-for-your-woodturning-tools/ How To Make Wood Handles for Wood Lathe Tools I thought I would make a quick video on how to turn some wood handles for the wood lathe tools you might make. Typically these handles are anywhere from 12 to 24' long. Some woodturners want perfect handles so they will take a 3x3 block of dried lumber and turn it into the shape they desire and then drill a hole in the end to accept the tool tang, epoxy it in place and put a brass or copper furl at the end to keep the wood from splitting. If the tool has a flat or squa


Offset Turning - Hammer Handle ·
By: Cip's Wood Chips
November 22, 2017 · 2,221 views

I have been wanting to learn about offset wood turning and I finally found a project: making a wood handle for a ball pein hammer head that I found in a thrift shop in Kerrville, Texas.


Woodturning wooden handles-with music ·
By: Woodturning with Kim
November 18, 2017 · 80 views

In this video I'll show you how I turn handles for cheeseslicers and butter knives for a commission work I'm doing! Check me out on instagram! @woodturning_with_kim


Resin Tool Handle / Make Your Own Tool Handle / Woodturning ·
By: Carl Jacobson
November 10, 2017 · 9,988 views

In this video I turned a tool handle out of resin for my D-Way beading tool. My buddy Jared at Lizard Blanks gave me the hybrid resin blank. Lizard Blanks https://www.lizardblanks.com/ D-Way Beading Tool http://d-waytools.com/ Turning demos http://www.norcalwoodturners.org/ http://bayareawoodturners.org/ http://www.svwoodturners.org/ http://www.goldturners.org/ RZ Mask: https://rzmask.com/ Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order Tools and Supplies I use in my


Making a Lathe tool handle #06 ·
By: Made by Brent
October 23, 2017 · 3 views

This is how I make a tool handle for my lathe tools. I used a handle insert with this one. I like these because it makes it easier to sharpen the tool.


Turning a Cast Resin Tool Handle part 2: woodturning with Sam Angelo second upload YT ·
October 21, 2017 · 3,090 views

Turning a Cast Resin Tool Handle PART 2 Sam began casting a resin tool handle for a box scraper in part 1: (see link below). He completes the project by turning the cast resin tool handle and attaching the tool steel. Cast Resin Tool Handle .....the casting (PART 1) https://tinyurl.com/y9f2gnqk For more on casting-check out this playlist on casting: https://tinyurl.com/yd3xg5td See my work at www.samangelo.com and www.wyomingwoodturner.com


Cast Resin Tool Handle .....the casting (PART 1) woodturning with Sam Angelo ·
October 17, 2017 · 3,477 views

Part 1.......Sam covers the casting for making a tool handle. Sam begins by covering the steps and the supplies needed in the casting process. He casts the resin tool handle---part 1---and finishes the project by turning the handle in part 2. LINK to part 2 Turning the Handle https://tinyurl.com/y86d8nps Sam uses Alumilite Clear, Slow --casting resin.


Woodturning - Clean Knob ·
By: Turn Time with Al
October 05, 2017 · 76 views

Nothing like a clean knob whilst in the workshop.


Делаем ручку для резца (Make a handle for the cutter) ·
By: Аleksey Bek
September 17, 2017 · 257 views

Делаем ручку для очередного резца на токарном станке. Make a handle for another cutter on a lathe.


Jimmy Clewes Woodturning Tool Handle System ·
By: jimmy clewes
August 20, 2017 · 1,989 views

Woodturning Tool Handle System by Jimmy Clewes


008 01 WWRJF Ash Tool Handle 15min Real Time March 2012 ·
By: Richard Ford
August 02, 2017 · 19 views

In this video I turn a tool handle for a large Round Nosed Scraper. In Real Time. Originally Uploaded March 15, 2012 58,086 views


Hand made tool ·
By: Jon Whateley
July 20, 2017 · 726 views

See how to make a dual-ended woodturning tool with a 200mm tool steel section and locking nut. Make your own design of handle just the way YOU want it. Great fun turning project, great value. Use this principle to mend old tools or make new handles for old tools.


Turning Tool Handle Identification ·
By: Mike Peace Woodturning
July 19, 2017 · 1,862 views

I explain how and why I identify my turning tools to make it easier to pickup the right tool and redcue risk of losing one at a turning event. I upload a new woodturning tip every Wednesday and a woodturning tutorial video each and every Friday so Ya’ll come back, hear? You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html


Wood turning / Malho ·
By: Assis Ribeiro
June 22, 2017 · 19 views

Torneado um malho de madeira.


Part 4 Steampunk turning tool handle ·
By: Gabe Castro
June 19, 2017 · 160 views

Part 4 Steampunk turning tool handle, Clock parts, Watch parts, Carbide Cutter, Cast in Alumalite. Thank you for watching. Please Subscribe.


Carbide Steampunk turning trailer ·
By: Gabe Castro
June 16, 2017 · 76 views

Carbide Steampunk turning trailer for a 4 part series. Follow on Facebook exoticwoodpen.com and subscribe on YouTube please. Click link to buy Alumalite: http://amzn.to/2zBvAeH


009-1 Woodturning with Richard Ford - Ash Tool Handle 15min ·
By: Richard Ford
June 15, 2017 · 11 views

1 of 1 I had to make a few handles so I thought I would make a video. Originaly Uploaded on Mar 15, 2012 to popford.


Part 3 of 4 Steampunk turning tool handle. ·
By: Gabe Castro
June 12, 2017 · 139 views

How to make a Steampunk turning tool handle using Alumalite Clear Cast. Please Subscribe. Click link to buy Alumalite: http://amzn.to/2zBvAeH


Part 2 Steampunk turning tool handle ·
By: Gabe Castro
June 09, 2017 · 225 views

Part 2 Steampunk turning tool handle, thanks for watching. Thumbs up and Subscribe please.


Drilling handles on lathe ·
By: Gabe Castro
May 26, 2017 · 57 views

Two different ways of drilling on lathe, which one is better? Watch and find out. Thumbs up, Please subscribe. Click link to buy 4 Jaw Chuck System: http://amzn.to/2xTgeon


Time for a longer handle ·
By: Rich McNatt
May 10, 2017 · 279 views

a look at making a new handle


Turning a wooden handle ·
By: Woodturning with Kim
April 30, 2017 · 234 views

In this video I will show you how to make a wooden handle for a cheese slicer, you could also make handles for cheese knives, butter knives etc. I'm using walnut wood for this handle but you could use any type of wood. Want to see more of me? Instagram: woodturning with kim My tools and equipment! Camera: Sony a5000 Lathe: Luna BWL 406 (record power 305) Editing software: Movavi video editor


MVI 0607 ·
By: Colin Laughton
March 21, 2017 · 7 views

Turning the handle for my carbide round tip chisel.


Woodturning A Handle For My Tripod (found footage from summer 2016) ·
By: Jerry Paul
March 14, 2017 · 1,099 views

I found some footage that I had lost shortly after uploading it to my computer last summer. In this video, I made a handle for my cheap little travel tripod to replace the one on it that had stripped. I seemed to be in a pretty good mood that day. LOL I do much better in the summertime.


The Gumnut Tool Handle ·
By: Brendan Stemp
February 17, 2017 · 8,153 views

The process I used to make this handle made from gumnuts cast in resin.


The Most Wicked Cool Lathe Tool Handle on YouTube ·
By: wortheffort
February 08, 2017 · 16,508 views

Sometimes you just want something specialized. Something you hope thru careful design and execution you'll use for a lifetime. This was my goal with this specialty lathe tool handle. Fitted, weighted, sized, and shaped to serve one specific need. Plus we had to make it wicked cool along the way.


22 - Tool Handle from a Table Leg ·
By: Bill Rockwood
January 29, 2017 · 338 views

Repurposing a leg from an old table into a tool handle.


Make a Cheap and Effective Woodturning Tool Handle of PVC? ·
By: Mike Peace Woodturning
January 06, 2017 · 3,943 views

I show woodturners how to make an easy and inexpensive interchangeable handle for woodturning tools. I use schedule 40 PVC pipe. It requires no metal working skills or thread tapping since it uses a wooden insert and threaded set screw insert to secure the tool. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html


Making a New Cherry Spindle Gouge Handle for a Friend ·
By: Ben Barwick
November 05, 2016 · 264 views

I turn a new cherry handle for a Benjamin's Best 3/8' spindle gouge for a gift for a friend. Marius Hornberger's Fingernail Jig https://www.youtube.com/watch?v sfmIv0iXjis&t 30s If you like what I am doing check out my social media and website. If you are interested in purchasing an item, check out my website or etsy page below. You can also support me by using any of the 'Tools I Use' links below to purchase anything from Amazon: www.waystonewoodworks.com www.facebook.com/waystonewoodworks www.instagram.com/waystonewoodworks https://www.etsy.com/shop/WaystoneWoodworks Tools I Use: Centr


Woodturning a handle for a big Stubai gouge ·
By: Andrea Zanini
October 24, 2016 · 963 views

I had this 25mm Stubai gouge sitting around for a while. In this video I show how to turn a long oak handle for heavy duty work. follow me on facebook https://www.facebook.com/zaniniwoodcarving/ follow me on Instagram https://www.instagram.com/andreazanini464/ music by http://www.bensound.com/royalty-free-music


#71 Pimping Your Woodturning Tool Handles ·
By: M. Saban Smith Woodturning
September 06, 2016 · 4,867 views

This week I get seriously funky and pimp up my wood turning tool handles with some creative burning and colouring. Have you seen my new Black Dog Workshop Project? Check it out from the start here: https://www.youtube.com/channel/UC8RiD8a0FZGzvGIcM8SPkwg At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list! *Keep up with my socially!* Facebook: http://www.facebook.com/msabansmith Twitter: http://www.twitter.com/msabansmith Google : https


E55 - Revealing the New Workshop Name and I've Pimped My Tools! ·
By: M. Saban Smith Woodturning
September 02, 2016 · 2,469 views

Wow! Things are moving quickly! Here are the links mentioned in the video: It would be great if you would follow and subscribe to this incredibly exciting adventure and join me on it.... The New Workshop Website: http://www.blackdogworkshop.co.uk (Website is still under construction, but there is a newsletter you can join to keep in touch) New Workshop Facebook Page: https://www.facebook.com/blackdogworkshopuk/ New Workshop YouTube Channel: https://www.youtube.com/channel/UC8RiD8a0FZGzvGIcM8SPkwg At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list! Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com Something else of interest: Read my FREE newspaper at http://www.turnersrest.com The UK & Ireland Woodturning Symposium: http://www.ukiws.co.uk


Woodturning Handles | An Alternative Approach ·
By: Seganti Woodworking
September 02, 2016 · 8,107 views

DESCRIPTION: A great way to save a few dollars on your next turning tool purchase is to buy your tools un-handled and make your own. I came up with a design that works really well. It includes set screws which allow you to remove the tool from the handle if needed. PARTS: Ferrule: I use 1' copper pipe (which is the inside diameter) for all of my turning tools. The only exception is my Spindle Roughing Gouge (SRG) which uses 1-1/8' copper pipe. Set Screws: I use 5/16-24 set screws for all of my tool handles. The lengths vary based on the tool handle wall thickness. TOOLS WITHOUT HANDLES: Plea


How to Turn a Tool Handle ·
By: Bryce Roebel
September 02, 2016 · 71 views

I show a simple way to turn a tool handle for my carving chisels out of firewood.


New handle for a old tool ·
By: Rich McNatt
May 12, 2016 · 376 views

I do a bit of spindle work on this project, turning a new handle for one of my lathe tools


Le PicBois #27 - Branding Iron Handle // 360 Video ·
By: Le PicBois
March 24, 2016 · 2,142 views

[ I made a handle for the branding iron I bought from my bud Tony Rouleau ] Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois ______________________________________________________________ ///// Special Thanks ///// • Tony Rouleau: https://www.youtube.com/channel/UC5fLXedqTq0OMlwXdpOfQBA • Billy Rioux: https://www.youtube.com/user/Billyhistadventure • Easy Wood Tools:


Homemade lathe tools and handles (herramientas casera para el torno) ·
March 24, 2016 · 7,437 views

I needed a few new tools and decided that i could make them myself. these tools, like many other of my wood working projects were made with things i already had on hand so to me, the cost was 0 for the exception of the termite tool tip. in the video i outline the details of these tools and tool handles: 1. 3/8' drill chuck in handle (reuse of old drill chuck) 2. end grain bowl, gouge (this is a spindle gouge used for end grain turning) 3. termite tool handle (a handle to old the termite tool tip) 4. router bit tool holder (holds any tool with 1/2' shank) if you have any questions please put them in the comments, thanks for watching and please don't forget to subscribe.


Making Tool Handles for Carbide Cutters ·
By: Peter Matthew
March 04, 2016 · 476 views

This video shows how I made tool handles for my bars and cutters that I bought. Jack Nelson: https://www.youtube.com/channel/UCGRk... Cap'n Eddie's cutters: http://www.eddiecastelin.com -------------------------------------------------- My website: www.peterturnswood.com ----------------------------------------­­- My vlog channel: https://www.youtube.com/channel/UCiST... ----------------------------------------­­--------------------------------------- If you would like a sticker, send me a stamped self addressed envelope or one of your own stickers with your address. Peter Matthew 6388 East Executive Drive Westland, MI 48185 Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080 Subscribe to my YouTube Channel! I post videos every Friday! Music: Lachaim by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...) Source: http://incompetech.com/music/royalty-... Artist: http://incompetech.com


WoodTurning Fun: Turning a Handle for a Spindle Gouge. ·
By: Barry's Woodturning
February 26, 2016 · 464 views

I got a good deal on a Sorby spindle gouge and turned my own handle. Even though I really love saving money, I also enjoy basic projects like this. It's nice to think about using this tool for years. It's hard to do a direct comparison of the Sorby tool to my other H.S.S. tools because the edge retention depends on the angle and type of edge. But I have no complaints; it's a nice tool, and the smaller size is great for more detailed spindle work. Plus it gave me a chance to use my favorite spindle turning tool, a skew chisel. 'Aces High', 'Honey Bee' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0


How to make your own woodturning tool handle Part III ·
By: Jack Nelson
February 13, 2016 · 315 views

How to make your own woodturning tool handle Part III will show how to apply a color with dye, use paste wood and grain filler, and apply a high gloss lacquer finish.


How to make your own woodturning tool handles part II ·
By: Jack Nelson
February 13, 2016 · 214 views

How to make your own woodturning tool handle part II will show how to install brass inserts into the ferrule and turn the handle.


How to make your own woodturning tool handle Part I ·
By: Jack Nelson
February 13, 2016 · 238 views

Making a woodturning tool handle that allows the tools to be installed or removed as needed. Part 1 will show the components and installing the ferrule.


Thread Chasers Handles & more ·
By: Peter Woodbine
February 07, 2016 · 808 views

Turning handles for my new Thread Chaser Set plus making rebating tool and support rest from my Dad's old tools. Music by courtesy of Teknoaxe - http://www.youtube.com/user/teknoaxe


My collet handle ·
By: Steve Krumanaker
January 23, 2016 · 2,273 views

How I make a collet handle for my lathe gouges with off the shelf hardware store fittings.


WoodTurning Tool Handle Fix ·
By: The Wood Whirler
January 08, 2016 · 967 views

Handles were hurting my hands, so I reworked them.


make your own Tool Handle ·
By: Fabian's Tiny Workshop
December 11, 2015 · 5,585 views

I make a new tool handle for my small detail gouge.


Turning a woodturning tool handle ·
By: Mike Peace Woodturning
December 04, 2015 · 10,022 views

I show how to turn your own woodturning tool handle. Why? There are some great values out there for tools that come unhandled or you make your own wood turning tools. Turning a tool handle is simple and you can customize the size and shape to perfectly fit your own needs. I explain about size considerations and show why bigger is not always better. Check out my blog http://mikepeacewoodturning.blogspot.com/ for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers channel.


Fabrication d'un manche d'outil + Affûtage - Manufacturing of a handle of tool + Sharpening ·
By: J'M Le Bois
December 01, 2015 · 13,077 views

Voici comment remplacer le manche d'un outil , j'espère que cette vidéo vous plaira. Si c'est le cas n'oubliez pas de laissez un pouce bleu , ça fait toujours plaisir :) et abonnez vous :) Lien pour les dons : https://www.paypal.com/fr/cgi-bin/webscr?cmd _flow&SESSION QP3UcMl9FGBLy_jwfeZpBQLaysT0aMCDtYh0qN11ck_aCU1kVFi7k0na6Dy&dispatch 5885d80a13c0db1f8e263663d3faee8dcce3e160f5b9538489e17951d2c62172


wood turning # 15 making a carbide tool handle ·
By: Woodslee Summercraft
November 22, 2015 · 711 views

a quick video making a handle for one of my carbide tools


Tapered Tenon Handle for Socket Type Chisel ·
By: Cip's Wood Chips
November 04, 2015 · 3,773 views

I found a old chisel without a handle at garage sale. It was a socket type chisel that requires a tapered tenon. From a piece of recycled oak I turned a new wooden handle.


Precision Machine Aluminum Tool Handle ·
By: Craft Supplies USA
October 15, 2015 · 5,367 views

Precision Machine Aluminum Tool Handles offer versatility and performance unrivaled by other modular tool handle systems. Buy now: https://www.woodturnerscatalog.com/p/140/6576/Precision-Machine-Aluminum-Tool-Handle?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Machined from aircraft grade aluminum to a traditional handle profile and milled with 6 flutes for improved grip, PM aluminum handles work with almost any brand of woodturning tool compliments of the interchangeable adapter sleeve design. Every P


Woodturners Journal: Handled Drill Bit for Gauging Depth ·
By: Woodturners Journal
October 14, 2015 · 938 views

This is a great woodturning tool that is inexpensive, quick to make, and will give you a quick gauge of the depth you want to turn your projects at.


Platter and Tool handles ·
By: Rich McNatt
June 26, 2015 · 298 views


How I Make Copper Ferrules ·
By: Cip's Wood Chips
June 18, 2015 · 13,177 views

This is a short video showing how I make copper ferrules from copper tubing. The copper is metal and it is important to be careful to avoid cuts and nicks.


Turning A Tool Handle With Adapter ·
By: Gord Rock
June 18, 2015 · 1,527 views

Turning a wooden handle to use with an adapter to fit a rectangular tang on a Cindy Drozda Signature Negative Rake Square Recess Scraper.


The Blind Wood Turner - Episode 32 - Turning A New Tool Handle ·
By: Blind Wood Turner
June 04, 2015 · 493 views

In this installment of The Blind Wood Turner, Chris gives an old screwdriver a new lease of life by turning a lovely new handle.


2nd Custom Chris tool handle review ·
By: James Walt
June 01, 2015 · 86 views

I review Custom Chris's new aluminum tool handle with a One Way 5/8' bowl gouge. I will rough turn a Siberian Elm bowl blank.


Woodturning Bowl Gouge Tool Handle ·
By: Cip's Wood Chips
May 28, 2015 · 3,833 views

I purchase the tip for this tool from the estate of a member of our woodturners club. The wood for the handle came from a table leg.


Review of Custom Chris's new aluminum tool handle. ( Fail ) ·
By: James Walt
May 25, 2015 · 105 views

I attempt to review Custom Chris's new aluminum tool handle but have a failure.


#130 Herramientas y empuñadura multiuso - tools and multipurpose handle ·
By: Miguel Sanchez
May 19, 2015 · 16,871 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Unas herramientas utiles para pequeños proyectos, espero que os gusten. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es


Woodturning Tool Handle in 4 mins ·
By: Custom Chris
May 10, 2015 · 2,492 views

Come to my Etsy Store and get a hand made Aluminum Tool Handle https://www.etsy.com/shop/CustomChrisWoodworks For entertainment purposes only music by Kevin MacLeod (incompetech.com)


Wood Turning #102 A Peach Pizza Cutter handle ·
By: The Tiny Trailer Workshop
April 18, 2015 · 1,799 views

A simple handle that changes the feel of a tool from alright to cool in one easy step! I was pretty sure that this had been a Cherry branch until I remembered that I hadn't pruned any large branches off the Cherry! I suppose I could have edited that part out... but that isn't the way I work! Same as when I filmed the green screen part... the audio really sucked!! So i rerecorded the audio... and then had to try and make it look like that was what I was saying at that time! Funny... you can have an exact copy of the words in one... but if you say them again your timing is all off...and you loo


Turning a chisel handle ·
By: Regan Leatch
March 28, 2015 · 786 views

Today I turn a chisel handle on my lathe and use a Dremel to restore the metal part. If you like this video please like and subscribe.


Modular Handle for Turning Tools ·
By: PeachtreeWoodworks
March 22, 2015 · 1,399 views

A quick overview of the Modular Handle for turning tools.


Machining Mini Handle ·
By: Custom Chris Off the Cuff
March 07, 2015 · 875 views

Making some aluminum handels for Mr Rich McNatt https://www.youtube.com/channel/UCJQKDs_2LW5RJX3oFvqMzpQ


Woodturning Aluminum Tool Handle short video ·
By: Custom Chris
March 01, 2015 · 2,192 views

Short video for the new channel and a look at the new handles Build Video https://www.youtube.com/watch?v IiJDc9PQxsI Come to my Etsy Store and get a hand made Aluminum Tool Handle https://www.etsy.com/shop/CustomChrisWoodworks For entertainment purposes only music by Kevin MacLeod (incompetech.com)


Machining Wood Turning Tool Handles ·
By: Custom Chris Off the Cuff
March 01, 2015 · 9,141 views

My 3rd tool handle made on my metal lathe Esty 1/2 tool handle https://www.etsy.com/listing/224582676/aluminum-wood-turning-tool-handle?ref shop_home_active_1 Email for tool handle Inquiry. cmwoodtools@gmail.com


Hand Woodturning a handle in less than 2 mins ·
By: woodturner21
February 05, 2015 · 1,074 views

This is one of 250 hard wood handles made to the customers pattern


Handle Making ·
By: micpen22
January 25, 2015 · 178 views


Not so fancy tool handle. ·
By: Adze Woodturning
January 23, 2015 · 302 views

Woodturning a Walnut tool handle for a new bowl gouge.


#2 Turning a tool handle X 4 ·
By: Yuval Lahav Woodturning
January 16, 2015 · 2,268 views

In this long long video I will show you steps of turning a tool handle, and I will be turning 4 handles for 4 new hollowing tools I just got in the mail, from 3 different types of wood, isn't it exciting??! Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ The hollowing tools shown in this video can be ordered from: http://fromthetree.co.uk/hollowing-tools.html Songs in this video are: 1. Wooden Ambulance - Hope Against Hope 2. On Tour - November Hits Hard 3. Josh Woodward - The Dreamers 4. Josh Woodward - Branches All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!


Turning a Tool Handle for a TURNING Tool 2 of 2 ·
January 15, 2015 · 7,813 views

Making a Tool Handle: In part 2, Sam continues to drill the recess for his tool. He shapes the handle with a SRG and a skew chisel, sands and finishes the project with tung oil.


Turning a Tool Handle for a Turning Tool 1 of 2 ·
January 15, 2015 · 11,733 views

Making a Tool Handle: In this first part--Sam Angelo shows some of his hand crafted handles and progresses to the point of drilling out the handle for the tool. The project continues in 2 of 2.


A New Tool Handle ·
By: Custom Chris
December 01, 2014 · 3,234 views

https://www.kickstarter.com/projects/2046422509/common-man-wood-turning-tools Think of the Kick Starter as a kinda as pre-ordering The side on the right of the Kick Starter is where you can give funds and the where you can see what rewards come with that funding amount. For entertainment purposes only music by Kevin MacLeod (incompetech.com)


How to make a Tool Handle on a Wood Lathe ·
By: Shawn Gano
November 25, 2014 · 14,955 views

Many quality tools these days come without a handle. This helps reduce the cost and allows you to make a handle that is customized for you; plus they are fun to make! This video demonstrates how to make your own wooden lathe tool handle.


By: robohippy
September 23, 2014 · 3,029 views

Reed Gray explains some of the various wood turning tool handle designs.


What I learned today. Plus a pretty cool handle and tool ·
By: MARK Baid
September 16, 2014 · 219 views


Off-Center Screw Driver Handle: Sam Angelo ·
September 03, 2014 · 43,618 views

Sam turns a replacement handle for a combination screw driver. To make it more user friendly, he turns it off-center for a better grip.


Woodturning a lathe tool handle using carbide tools ·
By: SJWoodworks
September 03, 2014 · 13,596 views

In which I turn a tool handle FOR a carbide tool, USING carbide tools.


By: Robbiethewoodturner
June 19, 2014 · 22,820 views

Erik Anderson https://www.youtube.com/user/KireOgerNosredna Here is my latest project a WOODTURNERS CHUCK TOOL HANDLE


2014-05-24 Turning A Tail Stock Handle Extension by Dan Douthart ·
By: Gwinnett Woodworkers
May 26, 2014 · 2,512 views

Dan Douthart shows the steps he uses to turn an auxiliary handle for the lathe he is using. While constructing a useful shop made tool, he shows basic concepts of spindle turning, drilling a large hole in the end, and parting off the finished piece. This video is part of a series on basic woodturning. Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.


#89 Empuñadura de aluminio - Aluminium tool handle ·
By: Miguel Sanchez
April 14, 2014 · 33,991 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Empuñadura para gubias en aluminio de aspecto y resultado totalmente profesional. Espero que os guste. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es


Wood Turning #57 Sometimes you just have to put a handle on those caps ·
By: The Tiny Trailer Workshop
March 19, 2014 · 1,809 views

Sometimes you just have to put a handle on those caps. So here is the rest of the haandle for my tripod! A basic spindle turning that is also hollow. I did however drill that hole just a little oversize so what I did was to make the whole thing longer and drill through that with a smaller bit, making a nice tight fit. It did work! So like I said... thank you for the suggestions and I will keep finding things to turn! Thanks for watching Larry


Make a Removable Wood Tool Handle for Woodturning Tools ·
By: Cindy Drozda
March 06, 2014 · 54,161 views

Using the Aluminum Handle Adapter, I show you how to make a removable wood tool handle for Woodturning Tools. The Adapter with set screws is perfect for scrapers with rectangular tangs. One handle can be used for several tools, and gouges can be reversed into the handle to protect the edge for travel. Please take a moment to visit my website, http://www.cindydrozda.com for more information about my life, Artwork, Instructional Woodturning DVDs, Signature Turning Tools, and Woodturning Supplies. Aluminum Handle Adapters are available for online ordering here: http://www.cindydrozda.com/html/Handle_Adapters.html Questions and Comments are invited. Happy turning, everyone!


Turning a Tool Handle for a wood turning scraper ·
By: Turning Round
February 27, 2014 · 1,545 views

In this video I turn a piece of ash into a nice tool handle for a scraper. Using my wood lathe I will show all the steps to turning a tool handle for use with my lathe. It is a simple process and can save you a lot of money buying only the tool tip. Or you cna easily replace the handle on an older tool and give it new life.


Screwdriver Handle ·
By: Henrique Sampaio
December 04, 2013 · 1,148 views

In this video I turn a handle for a screwdriver


Cabo de Ferramenta ·
By: Henrique Sampaio
December 04, 2013 · 9,621 views

Neste video, eu mostro o processo de torneamento de um cabo de chave de fenda/philips


Woodworking Chisel Handle Preference — Woodturning ·
By: Master Carpenter
November 21, 2013 · 190 views


UpCycle an Old Chisel ·
By: Cip's Wood Chips
October 17, 2013 · 115,571 views

Why buy a new chisel when you can make an old one look new again. In this video I will show you how to take a old plastic handle chisel and make a new wood handle with a classic look. These videos are intended for your entertainment and only demonstrate the way I do these things. Thus may not be the best way to perform these tasks. As always, Be sure to read, understand, and follow the instructions that came with your tools, equipment, and finishing materials. Always work safely and wear proper safety equipment and have adequate dust control and ventilation.


Turning Custom Tool Handles - Bob Bezanson ·
By: Woodturners of Southwest Missouri
October 01, 2013 · 32,551 views

Bob Bezanson of the Woodturners of SW MO demonstrates turning custom tool handles while adding a brass plumbing fixture turned down as the ferrule. He also offers several tips and tricks along with the demo. Downloadable PDF's are available on our club website with sources and further instructions. www.woodturnersofswmo.org The Woodturners of SW MO meeting in Springfield, MO the 4th Saturday each month. For more information visit our website at www.woodturnersofswmo.org


Turning Off Grid - Tool Handles 1 ·
By: Markerbuoy - On Canada's Left Coast
September 06, 2013 · 0 views


Hurricane Woodturning Tool Handle - The Woodturning Shop ·
By: The Woodturning Store
July 29, 2013 · 6,921 views

The HD video shows the Hurricane Woodturning Tool Handle. It is a modular turning tool handle system made in the USA from aircraft grade aluminum. It accepts 5/8' tools and inserts are available for 1/2', 3/8' and 1/4' tools. A rectangular insert will soon be available. Please subscribe to my channel and send me any comments or suggestions. Check out my website at: http://www.thewoodturningstore.com or http://www.woodturner.co. On my website you will find Hurricane Tools and Chucks, Projects Supplies and I am also an authorized dealer for Robust Lathes and tools


Wood Turning—Equipment Handles ·
By: Guy Bradbury
July 06, 2013 · 39,002 views

Tutorial on Making New Handles For Shop Equipment, Using Simple and Inexpensive Hardware.


# 162 Handle Exchange Reloaded ·
By: Cap'n Eddie Castelin
April 18, 2013 · 7,378 views

I reloaded this one because I screwed up the phone number. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com


Woodworking Chisel Handle Preference — Woodturning ·
By: Jake Gevorgian
December 08, 2012 · 15,259 views

I have made a blog post about this project. It can be found at http://www.paloarte.com/what-woodworkers-do-on-a-weekend/ I don't like the typical woodworking handles. The steel is great, it doesn't require aggressive hammer or a mallet to cut through the wood fibers. But with my design of the handle, the aggressive cuts still can be made without the nasty pinch of the ferrule. The chisel is inserted into the hole and it will not split the wooden handle because the chisel has a flat section sitting on the wood. On the top I have a round top bolt. I will need gorilla glue to glue these up nicely.


A Nice Grip Drill Bit Handle — Woodturning ·
By: Jake Gevorgian
October 21, 2012 · 3,224 views

I made couple of handles for drill bits. I think that these handles don't have to be perfect in shape. That is why I made three flat surfaces on it, to make it so it has a good grip.The music in the background is by a musician from UK named Reark - track's called we broke up after 223,014 characters together. YouTube channel: http://www.youtube.com/user/RearkMusic SoundCloud: http://soundcloud.com/reark


New Thompson Deep Bottom Bowl Gauge w/ Homemade Handle ·
By: Getting0Done
August 05, 2012 · 10,591 views

I ended up buying a new bottom gauge and test driving it for a while with local people I turn wood with. I didn't want a Thompson handle though and the Oneway adapters are not big enough. So, the best route (and the cheapest) was doing it this way. That way I can have a handle that is perfect for finishing cuts, comfortable and is long enough to reach way in there for those tricky spots and stay in control.


New Gouge Handle ·
By: OzWorkshop
July 25, 2012 · 655 views

After an unfortunate accident a new handle was needed


The Tool Handle Making Process ·
By: Jake Gevorgian
February 25, 2012 · 73,928 views

woodturning tool handle


Screw the Skew ·
By: wortheffort
October 15, 2011 · 104,078 views

Making tool handles with only one tool, the skew chisel. How I learned Skew Chisel techniques for Wood Turning and ended up with a bunch of Screw Drivers.


Drilling a mounting hole in a woodturning tool on the lathe ·
By: SegmentedTurner
August 01, 2011 · 18,985 views

I give a detailed description of how I get a mounting hole for a woodturning tool drilled on the lathe. This covers the proper way to start the hole so that it stays on-center and doesn't waunder whle being drilled.


Wood Turning—Lathe Turned, Cabinet Handles ·
By: Guy Bradbury
July 11, 2011 · 3,664 views

Lathe-Turned Handles Specifically designed for a Shop Cabinet That holds a Bench-Top Sander. See the building of the cabinet carcass in the movie—Dados and Plywood, (parts one and two)


75 tool handle.avi ·
By: Cap'n Eddie Castelin
April 05, 2011 · 25,063 views

A basic toolhandle, with some tips on how to prep, turn and finish.


Tool Handle, Drilling The Hole Revisited ·
By: gmertl
February 15, 2010 · 6,042 views

Trying to clarify the process I use for drilling a hole in a tool handle for mounting the tool.


Turning A Tool Handle, Episode 1 ·
By: gmertl
February 08, 2010 · 23,172 views

My procedure for making a Tool Handle on the Lathe. Introduction and first steps.


Turning A Tool Handle, Episode 2 ·
By: gmertl
February 08, 2010 · 15,452 views

Fitting the ferrule and starting to turn to shape.


Turning A Tool Handle, Episode 3 ·
By: gmertl
February 08, 2010 · 14,252 views

Complete turning to final shape and drill the mounting hole for the tool.


Turning A Tool Handle, Episode 4 ·
By: gmertl
February 08, 2010 · 12,435 views

Mounting the tool in the handle, filling the gaps and wrap up.


Drilling the mounting hole in a custom turning tool handle ·
By: SegmentedTurner
January 29, 2010 · 17,925 views

I show one way to drill the mounting hole in a turning tool handle using the lathe. This is about the easiest way to make sure the hole is centered and aligned with the handle. To see more of what I do and to learn about how you can make your own woodturning tool visit my web site at http://www.DWMontville.com.


Tool handle segment 5 ·
By: Bob Hamilton
June 09, 2009 · 5,973 views

Turning a tool handle from a piece of dogwood. Apologies for forgetting to relocate the camera so much of the action is off screen in this segment.


Tool handle segment 4 of 5 ·
By: Bob Hamilton
June 09, 2009 · 9,054 views

Turning a tool handle from a piece of dogwood.


Tool handle segment 3 of 5 ·
By: Bob Hamilton
June 09, 2009 · 6,876 views

Turning a tool handle from a piece of dogwood.


Tool handle segment 2 of 5 ·
By: Bob Hamilton
June 09, 2009 · 7,702 views

Turning a tool handle from a piece of dogwood.


Tool handle segment 1 of 5 ·
By: Bob Hamilton
June 08, 2009 · 12,621 views

I needed a handle for a new 1/2' spindle gouge so I decided to run the camera while I was making it. The wood I used is dogwood.


Drilling tool handle hole on the lathe ·
By: SegmentedTurner
April 30, 2009 · 27,112 views

I show how to drill the tool body hole in your turned tool handle. Details about preparation and drilling are demonstrated. For more information about my work please visit my web site at http://www.DWMontville.com.


Make an Aluminum Tool Handle ·
By: Cap'n Eddie Castelin
February 04, 2009 · 24,920 views

Make a tool handle for your hollowing turning tools, specialty tools, etc.


Return to Turning Videos

Great Bargains

Heavy Duty Live Center

On Sale for only $16.53

List Price: $19.95

Click here for more information or to purchase


Dremel Rotary Tool Kit

On Sale for only $139.00

Save $60.99 (30%)

List price: $199.99

Click here for more information or to purchase

Roller Stand

On Sale for only $23.79

Save $6.11 (20%)

List Price: $29.90

Click here for more information or to purchase


Easy Wood Tools - Easy Start Rougher + Finisher + Detailer

On Sale for only $159.99

List price: $206.97

These tools have the smaller 9" maple handle and are 12.5" overall.

Click here for more information or to purchase

NOVA 48232 G3 Reversible Wood Turning Chuck

On Sale for only $99.00

Save $60.99 (38%)

List price: $159.99

Click here for more information or to purchase

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Artisan Ideas
Robust Tools
Rubber Chucky Products

(Click any Ad to go to our Sponsor's Website)