Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Making Tool Categories

 

Misc Tool Making Videos (264)

Sort by

Or click here to: Search All Videos


Assembling a 3D Printed Micro Mesh Dispenser ·
By: RJBWoodTurner
November 25, 2017 · 1,638 views

Shawn Shirey sent me a 3D printer Micro Mesh Dispenser. I decided to make a small modification with the assemble. Regards, Bob Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Ice Pick From Jimmy Diresta ·
By: Le PicBois
October 26, 2017 · 1,655 views

I found a nice place to put my Diresta's Ice Pick in the closet shop. I'll use is as a turning tool and you'll see it on my next videos! Here is the link to buy yours: http://www.jimmydiresta.com/ _____________________________________________ Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois _____________________________________________ My other channels: • QUADCOPTUB

 

Making a Disk Sander for a lathe ·
By: Woodturning - My Way
September 27, 2017 · 126 views

A step by step guide to making a disk sander for a lathe. Part of my first attempt of a YouTube Video. Created with Wondershare Filmora

 

026-01-01 WWRJF - My Brush Gouge and how I use it 39min ·
By: Richard Ford
September 26, 2017 · 74 views

A new Tool I call a Brush Gouge, how I use it along with some of the things it can do.

 

Making a Longworth Style Chuck ·
By: The Woodworking Shed
September 24, 2017 · 3,122 views

In this project video I show you how I made my Longworth Style Chuck. The inspiration for this project came from the following video. Please check it out for more detailed instructions.: https://www.youtube.com/watch?v Iyk-L5QuuJ4 The grippers I bought from eBay. Link below: http://www.ebay.co.uk/itm/Longworth-Chuck-Grippers-Set-of-8-New-/112511446402?hash item1a32346d82:g:5jwAAOSw03lY8L45

 

Soft Touch Revisited ·
By: Mike Peace Woodturning
August 25, 2017 · 2,439 views

I implement a suggestion from NotMyName on improving the soft touch for a Nova Live Center and a variation of his idea for a cone center. I upload a new wood turning tip every Wednesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? Want to support my channel? Buy your woodturning tools and accessories through my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Tellerschleifer für die Drechselbank | DIY Disc Sander for the Lathe | Projekt 52 ·
By: Andreas Achleitner
August 21, 2017 · 615 views

Salve! Heute habe ich mir eine Schleifscheibe für die Drechselbank gemacht. Mit dem Teil kann ich dann auch größere Segmentringe schleifen sowie plane Flächen von kleinen Objekten schleifen. Mein Name ist Andreas Achleitner und ich arbeite sehr gerne mit Holz. Wöchentlich gibt es auf meinem Kanal mindestens ein neues Video. Die Themenbereiche umfassen von der Theorie bis zur Praxis eine gute Mischung zum Thema Holzbearbeitung. Auf meinem Kanal sind diese Themen in folgenden Programmformaten gegliedert: Der Holzkurs Theorie und Praxisbeispiele aus der Welt des Holzes Drechseln-Tischlern

 

016-01-01 WWRJF - Making High Speed Steel Tools 41min 2014 ·
By: Richard Ford
August 18, 2017 · 50 views

How I make HSS High Speed Steel Specialty turning tools and some of the things they can do. Originally Uploaded Jun 21, 2014 4,391 Views

 

Rusty Scraper to Marking Knife ·
By: Andy Phillip
August 11, 2017 · 1,936 views

Had some comments about my karambit style marking knife being useless as a marking knife (which it is !!) So decided to make another out of an old rusty scraper ( this one does work )

 

Testing my home made thin parting tool / hack saw ·
By: Rolingmetal
July 28, 2017 · 1,790 views

In the previous video I made a thin parting tool from an old hacksaw blade. In this video I'm trying it out for the first time. Making a thin parting of tool video: https://youtu.be/UDaRGvXWIJk

 

Making a parting tool from an old hacksaw blade ·
By: Rolingmetal
July 26, 2017 · 2,734 views

I this video I finally make that thin parting tool from an old metal cutting hacksaw blade. Something I've been planning to do for months. This may be my best one yet, as it is really is a 2 in one tool :) This is my third zero cost wood turning chisel. Below are the links for the other two tools I made. Making a bowl gouge: https://youtu.be/UhFEHyXFKOo Making a spindle gouge: https://youtu.be/KGy5jwpv2BI FYI: If you want to support my channel follow the link below and buy some cheap shit from Banggood. Their commission will hopefully give me an infinite supply of drill bits to brake :) https://goo.gl/S9vHhL

 

T bar ·
By: SCCFORUM
July 21, 2017 · 281 views

I have to use a couple of small allen keys on the mini metal lathe. I thought it would be good to make a handle so they are easier to find and slightly easier to use. One down ,one to go.

 

Woodturning Project -DIY- Homemade Point Tool / Herramienta de Punta Hecha en Casa ·
By: Eme SantosH Creations
July 18, 2017 · 4,630 views

Hola amigos y amigas! Acá les muestro cómo hago una herramienta para usar en el torno de madera, la Point Tool. Esta es una herramienta muy versátil, la quería, pero cuando la busqué y miré los precios mmmm me dije 'Yo puedo hacerla' y aquí está. espero sea de su agrado. Si desean pueden suscribirse, comentar, dar me gusta, dar no me gusta pero por favor decirme por qué no les gustó, y tomen en cuenta de que yo simplemente soy una aficionada principiante, que muestro lo mejor que puedo lo que he aprendido. Saludos! Hello friends! Here I show you how to make a tool to use in the wood lath

 

Turned Morse Taper Drill Bit Chuck: Sam Angelo, wyomingwoodturner ·
By: WYOMINGWOODTURNER
June 28, 2017 · 8,336 views

With the intention of saving some weight in my tool kit as I traveled to Kansas City, I turned a drill bit holder (chuck?). It allowed me to leave my Jacobs chuck in the shop. An easy project, I hope you try it.

 

Sketch of my mider sled and chart by Al Furtado ·
By: Rebel Turner
June 06, 2017 · 2,110 views

This is not a wood turning video I have had many request for more info on my miter sled so I did a sketch up and video of my sled and a Excel copy of my angle chart. I hope this helps and if you want the actual files send me an Email alfurtado@verizon.net

 

DIY Building a Rack to hold my Wood Turning Finish Bottles. aka Spice Rack ·
By: Turning Round
June 06, 2017 · 472 views

On my new Wood Turning Tools Station with drawers, shelves I added a new shelf to hold the bottles for my wood turning finishes. It is a small wooden rack made from reclaimed palette wood. It is a simple project but a very useful one. This is like a spice rack. I am trying to have a new Video every Tuesday. Add to the Bottom of each video. Check out my Etsy Store: https://www.etsy.com/shop/TurningRound Check out my Website: http://turninground.biz/ Or support me on Patreon: https://www.patreon.com/TurningRound Or Find me in Instagram as: TruningRound https://www.instagram.com/turninground/ Thanks for watching.

 

Wood Turning - Make a Cone for your live centre & UKIWS news! ·
By: Mike Waldt
June 04, 2017 · 12,561 views

I show my method of making cone support for your live centre, and tell you who's demonstrating a UKIWS in July. UKIWS website - http://www.ukiws.co.uk/ UKIWS on Facebook - https://www.facebook.com/ukiws/ Daniel Vilarino - https://www.youtube.com/user/DanielVilarino Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk

 

#83 Rotary Sander ·
By: Yuval Lahav Woodturning
May 24, 2017 · 6,454 views

Making your own orbital was never simpler. Take a look and head to your shop and try it out! Patreon: https://www.patreon.com/YuvalLahav Twitter: https://twitter.com/YL_Woodturning Instagram: https://www.instagram.com/yuval_lahav_woodturning/ Facebook: https://www.facebook.com/yuval.lahav.16 Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Reddit: https://www.reddit.com/user/aforeignitalian/ Miguel Sanchez video - https://www.youtube.com/watch?v kAjD9aMG39Q&feature share CustomChris channel - https://www.youtube.com/user/customch

 

Turning a Chair Bodger's Beetle with Sam Angelo ·
By: WYOMINGWOODTURNER
May 22, 2017 · 4,728 views

A beetle is a large mallet used by a chair bodger. Along with a 'froe' it was used to split billets from green logs..... and to rough-out chair parts starting with a spring-pole lathe.. 'This video is my homage to the bodger of old and to those crafts-men and women around the world laboring without the aid of electricity or modern technology.' Sam Angelo Here is a video link dated 1935 which covers, in part, the work of the Chair Bodger: https://www.youtube.com/watch?v nP5_OJxNccY

 

Reed Gray aka Robo Hippy presents Articulated Arm Rest for Sanding ·
By: robohippy
May 15, 2017 · 2,634 views

Robo Hippy is looking for suggestions as well as shares an energy saving idea for bowl sanding.

 

Special tool with pencil sharpener for making dowels and small flag sticks - 2017 ·
By: Gabor Aron Fetyko
May 10, 2017 · 2,515 views

some works of my father see more on: http://www.facebook.com/feticogaboraron

 

Wood turning Articulating arm update by Al Furtado ·
By: Rebel Turner
April 24, 2017 · 3,379 views

Articulating arm update I made a few modifications and upgrades to this amazing tool really making it worth your time. Please share. Thank you

 

Jerry's Tenon Removal ·
By: Nubsnstubs
April 20, 2017 · 145 views

Visit my website at www.woodturnerstools.com for more information. This video is showing how I mount a form on a Jam Chuck using my Chuck Plate. From there it's on to removing unnecessary wood using a live center to keep the piece between centers. After the wood is removed, I need to set up my Tail Stock Steady to be able to work between centers to aid in reestablishing a dimple at center of the pedestal. When the dimple is made, it's back between centers using the live center to hollow out the pedestal. After the pedestal is hollowed with just a nub for support, the Tail Stock Steady is used again to remove the nub, and dress up the hollowed pedestal. For any questions you may have, please email Jerry at gmwoodworking78@msn.com or the phone number is 520-668-9900... .. Jerry

 

Taps, Dies and Milliput - An Experiment in Thread Cutting ·
By: Jimson's Stuff
April 11, 2017 · 20,420 views

In this video I am testing how well you can cut threads in Milliput and copper resin, using an M33 x 3.5 tap and die. My name is Jim Overton, welcome to my channel. Thanks for watching. Please like, share and subscribe. Milliput supplied by Milliput https://www.milliput.com RDG tools https://www.rdgtools.co.uk epoxy resin used is West Systems G/Flex http://www.westsystem.com/ss/g-flex-epoxy Yorkshire Grit, woodturners abrasive paste http://yorkshire-grit.com Disclaimer Woodturning is potentially dangerous! My videos are designed to give viewers creative ideas. The way I work is not necessarily the best or safest way to work! Your safety is your own responsibility not mine. Please follow all safety procedures and wear personal protective equipment. Wear a visor and a respirator dust mask at all times. Be safe, be creative and enjoy your turning.

 

Testing my home made bowl gouge ·
By: Rolingmetal
April 02, 2017 · 8,568 views

I my previous video I tried making a bowl gouge. In this video I get to find out if it is actually a bowl gouge. In other words. Does it suck or does it cut. FYI: If you want to support my channel follow the link below and buy some cheap shit from Banggood. Their commission will hopefully give me an infinite supply of drill bits to brake :) https://goo.gl/S9vHhL

 

The Inertia Sander ·
By: Brendan Stemp
March 21, 2017 · 8,511 views

Why I use them and how to use them.

 

Naked Turner Quick Look At Textured Canister And Tool I Made ·
By: Erik Anderson
March 20, 2017 · 1,449 views

Quick look at a textured canister and the tool I made to make the texture

 

Making a screw chuck for my wood lathe ·
By: Rolingmetal
March 12, 2017 · 14,150 views

I try making a screw chuck for my vintage wood lathe without getting screwed. This is going to be a bigger success than that faceplate failure of the previous video. FYI: If you want to support my channel follow the link below and buy some cheap shit from Banggood. Their commission will hopefully give me an infinite supply of drill bits to brake :) https://goo.gl/S9vHhL

 

Quick Woodturning Tools Rack ·
By: Le PicBois
March 11, 2017 · 4,023 views

I made this quick rack for my new woodturning tools. Those are from Tommy Gonzales. You can order yours today and get 10% off with this promo code: LePicBois : https://www.tommygworkshop.com/store Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois _______________________________________ Thanks to ALL my supporters on Patreon: Alain Gaudet, Alain Lebarbé, Benoit Pelleti

 

Making a small faceplate for my wood lathe ·
By: Rolingmetal
March 07, 2017 · 3,291 views

My wood lathe came with an aluminium faceplate, it's crap, one good catch basically destroyed it. But I need a face plate to try and turn a bowl. So in this video I will show how I make a new steel face plate. And then I will test it to destruction.

 

Jerry's Tail Stock Steady ·
By: Nubsnstubs
March 03, 2017 · 336 views

This video shows a couple Palo Verde pieces having the tenons removed. This particular TSS shown in this video is a special set up for making 8-9' rings. The normal TSS has a spread of 4 3/4' between wheels. The decorative bead on the bottom was accomplished by using my newest tool, a carbide 3 bead tool I just had made. Look for my other videos to see the tool. All tools shown can only be purchased from Woodcraft Stores in Fountain Valley, California, (714-963-9663) and in Tucson, Arizona (520-742-9663). Part number is 864920. For any questions you may have, contact Jerry @ gmwoodworking78@msn.com. www.woodturnerstools.com Thanks for watching my video. Please comment in the comment section.

 

Testing my homemade woodturning chisel ·
By: Rolingmetal
February 25, 2017 · 16,675 views

In my previous video I made a wood turning spindle gouge from an old file. In this video I do some testing on my self made chisel. I also start work on turning a carvers mallet

 

Tail Stock Steady by Jerry Marcantel ·
By: Nubsnstubs
February 24, 2017 · 270 views

This video is showing how I remove tenons from the bottoms of the forms I make. This particular piece has a pedestal foot. The tenon has already been reduced down to a nub 5/8' diameter. from that point on, I am using my Tail Stock Steady that I invented November, 2012. It does have a patent now, issued issued July, 19, 2016. The Tail Stock Steady is unique in use as the tenon and nub can be removed completely between centers. Sanding the bottom can also be done while the piece is still between centers. I've made over 500 pieces since the Tail Stock Steady conception, and only lost 3 pieces testing the first prototype. After those losses, it's been complete success on all pieces I've started. For more information, contact me at gmwoodworking78@msn.com for answers to any questions or comments you might have. Better quality videos will be posted in the near future. .. Jerry (in Tucson)

 

3 bead turning tool. ·
By: Nubsnstubs
February 24, 2017 · 257 views

Just testing my new carbide 3 bead tool that I actually made from tool steel 4-5 years ago. It was too hard to sharpen and keep the profile, so decided to make it in carbide. It works better than predicted. If you have any questions, please ask through gmwoodworking78@msn.com

 

Making a spindle gouge from an old file ·
By: Rolingmetal
February 23, 2017 · 23,267 views

In this video I try making a spindle gouge from an old file, and turn a handle for it on my old wood lathe.

 

Testing My Homemade Woodworm Screw Jig ·
By: Matt Turns
February 09, 2017 · 51 views

I did a quick test of a wormwood screw jig i made with my faceplate. works alright but the piece i used to test with wasnt exactly cut straight so it wobbled without tail support.

 

Cutting a Thread for your Spindle ·
By: Brendan Stemp
February 09, 2017 · 6,079 views

I have found this to be a very useful technique. I can now make wooden chucks that wind straight onto my spindle. In Australia you can buy the taps from: https://mcjing.com.au/categorybrowser.aspx?categoryid 344

 

Making a drive centre for my wood lathe ·
By: Rolingmetal
February 08, 2017 · 1,783 views

So far I've been using a drive centre that I need to fasten with 3 screws. This is driving me mad so I going to make something better. Well, I hope it's going to be better, time will tell. But so far it has survived a couple of nasty catches, so its looking good!

 

Woodturned Scratch Awl by Sam Angelo ·
By: WYOMINGWOODTURNER
February 08, 2017 · 8,642 views

Using an Alan Lacer scratch awl kit, Sam turns a handle from Turkish Boxwood with a hidden compartment. AND....there is a bit of thread chasing as well. Products by Alan Lacer: http://stores.alanswoodturningstore.com/ My wood list: @ wyomingwoodturner.com http://www.wyomingwoodturner.com/pdfs/Mywoodlist.pdf

 

Absaugung für die Werkstatt selber bauen | DIY Building a Dust Collector | Projekt 21 ·
By: Andreas Achleitner
February 08, 2017 · 12,752 views

Salve! Diesesmal habe ich mir eine Absaugung aus ein paar Abflussrohren gebaut. Das Projekt ging sehr schnell von der Hand. Wichtig dabei ist, das ihr auf den Funkenflug aufpassen müsst, also wenn ihr die Kantenschleife benützt, und ihr saugt ab, keine metallischen Sachen dort schleifen!!!! Verwendet auch Ableitungen für die statische Ladung. Da gibt es spezielle Schläuche die ich zwischen den Rohren an den Ecken eingebaut habe. Bevor ihr so ein Projekt angeht, schaut auch bitte nach ob eure Absauganlage auch genügend Power hat. Mein Name ist Andreas Achleitner und ich arbeite sehr gerne mit

 

23 - Making a Reed Gray-inspired Bowl Depth Gauge ·
By: Bill Rockwood
February 06, 2017 · 762 views

In this video I make a bowl depth gauge inspired by Reed Gray's 'cheater stick' method from shop scraps. Link to Reed's website: http://www.robohippy.net

 

woodturning #62 make a $6 set of cole jaws ·
By: Woodslee Summercraft
February 05, 2017 · 6,689 views

I needed a bigger set of cole jaws to finish the bottom of some of the bowls I turn, so with a 6 cutting board re-purposed I make my own. I drilled 7/32, and tapped 1/4-20 for the screws. please visit my website http://www.woodsleesummercraft.ca music on this video All music is available for free from http://www.freemusicarchive.org https://creativecommons.org/licenses/ Josh Woodward - Frannie ( instrumental ) Josh Woodward - Orbit

 

#177 Two bucket cyclone on the cheap ·
By: Miguel Sanchez
January 31, 2017 · 2,649 views

This is the third and last from the dust collection series for the shop, I hope you like it. Este video tambien esta en Español sigue el enlace mas abajo. This video is also in English, click the link below. https://www.youtube.com/channel/UCyOE_zdEBv4UcK5a_a3Z6hA Hablemos de torneado / Lets talk about woodturning: https://www.youtube.com/channel/UC2JiORNXY4uz2wg3hL1oLHA Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez http://www.tornoartesano.es mailto:miguel@tornoartesano.es

 

Dekoration Clint Eastwood Western Style | DIY Seating Corner Decoration | Projekt 20 ·
By: Andreas Achleitner
January 28, 2017 · 380 views

Salve! Im letzten Teil meines Projektes kümmere ich mich um die Dekoration. Ein paar Poster und ... seht es einfach an. Der Clint Eastwood freut sich hoffentlich!?! Mein Name ist Andreas Achleitner und ich arbeite sehr gerne mit Holz. Wöchentlich gibt es auf meinem Kanal mindestens ein neues Video. Die Themenbereiche umfassen von der Theorie bis zur Praxis eine gute Mischung zum Thema Holzbearbeitung. Auf meinem Kanal sind diese Themen in folgenden Programmformaten gegliedert: Der Holzkurs Theorie und Praxisbeispiele aus der Welt des Holzes Drechseln-Tischlern Interessante Projekte zum

 

Lathe Sanding Disk ·
By: Seganti Woodworking
January 27, 2017 · 1,010 views

DESCRIPTION: Sanding disks for the lathe offer a quick and easy way to speed up the sanding process. MATERIALS USED: 3/4' Medium Density Fiberboard (MDF) Faceplate http://amzn.to/2kvzalY 3M 77 Spray Adhesive http://amzn.to/2jcFx8Z 6' Sandpaper Larger Sandpaper Option http://amzn.to/2j385pU TOOLS USED: Bandsaw Pencil Compass http://amzn.to/2jcKher 3/4' Wood Screws http://amzn.to/2jczAbU Screw Driver Straight Edge FOLLOW US: Website: http://sonoranwoodshop.com/ Twitter: https://twitter.com/SonoranWoodshop Instagram: https://www.instagram.com/sonoranwoodshop/ Facebook: https://www.facebook.com/sonoranwoodshop Redwood Trail by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

#172 Cyclon dust collector on the cheap ·
By: Miguel Sanchez
January 15, 2017 · 2,649 views

Este video tambien esta en Español sigue el enlace mas abajo. This video is also in English, click the link below. https://www.youtube.com/channel/UCyOE_zdEBv4UcK5a_a3Z6hA Hablemos de torneado / Lets talk about woodturning: https://www.youtube.com/channel/UC2JiORNXY4uz2wg3hL1oLHA Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez http://www.tornoartesano.es mailto:miguel@tornoartesano.es

 

My shop made easy camera boom by Al Furtado ·
By: Rebel Turner
January 14, 2017 · 973 views

My shop made camera boom allows me to film from any location in my shop. it's fairly easy to build and one of the most functional booms you can make yourself. It's an Easy Boom. I will be creating drawings with all parts and measurements for those that need them. Plans available soon https://www.youtube.com/watch?v -FZyYHCYfUQ

 

Pro Tips: Comparing Woodturning Tool Steels ·
By: Craft Supplies USA
January 04, 2017 · 24,858 views

Comparing the most common woodturning tool steels. Visit us: https://www.woodturnerscatalog.com/c/31/Bowl-and-Spindle-Tools?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Table of Contents: 1:08 M2 High Speed Steel 1:46 Kryo M2 High Speed Steel 2:23 M4 High Speed Steel 2:47 Powdered Metallurgy Steel 3:31 M42 HIgh Speed Steel 4:07 Final Comparison Chart Pro Tips Series Video! What is the difference between M2 high speed steel and M42 high speed steel? Does powdered metallurgy steel hold an edge longer t

 

My shop made wood turning tools ·
By: Rebel Turner
December 24, 2016 · 15,595 views

Making your own tools has huge rewards, Not only do you save a lot of money you het a huge satisfaction of using something you made. To me that satisfaction is even greater than the savings. a great source for Carbide cutters http://globaltooling.bizhosting.com/products/carbide-insert-knives.html Join me in FB https://www.facebook.com/yournamegoeshere2 Follow me in Twitter https://twitter.com/AlbertFurtado57

 

The Pecker ·
By: The Wood Whirler
December 07, 2016 · 2,936 views

I am reloading this video. It got accidentally deleted, by me. It's about building one of my favorite turning tools.

 

How to Make a Mini Bowl Gouge | 2016 Christmas Ornament Challenge ·
By: Braxton Wirthlin
November 28, 2016 · 2,712 views

This is my entry for the 2016 Christmas Ornament Challenge. I made a mini bowl gouge from an old screw driver, the top of a broken harbor freight spring punch, a piece of hard maple for the handle, glued it all together with some CA glue, and finished it with O.B.'s Shine Juice. It was a really fun project to build and something this mini bowl gouge is definitely something I'll make again. I'd like to add a few more ornaments to my collection, maybe a skew chisel, a spindle roughing gouge, and a spindle gouge. Thanks for watching the mini bowl gouge video! Be sure to check out the playlist for

 

PVC Pipe Lathe Tool Holder ·
By: Fabian's Tiny Workshop
November 18, 2016 · 3,373 views

I'm making a PVC Pipe Lathe Tool Holder

 

The Versatile Beading and Parting Tool for Woodturning ·
By: Mike Peace Woodturning
November 04, 2016 · 16,795 views

I demonstrate how useful a beading and parting woodturning tool is for making beads and using as a parting tool. I show how to make a beading and parting tool from an inexpensive High Speed Steel blank. You can get the inexpensive HSS blank from my Amazon shop. https://www.amazon.com/shop/mikepeacewoodturning It also helps support my channel. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Hand Woodturning shelf support by eye ·
By: woodturner21
November 01, 2016 · 1,539 views

When the customer specifies he wants to advertise a job as hand made so the tolerances are not that high can I make shelf supports as cheap as possible. This shows how accurate I turn by eye and shows a old trick used by production turners, using the tool to measure. 40x40x250mm finished size.

 

DIY Wood Turning Tool Chip Deflector ·
By: SP Wood Art
October 28, 2016 · 2,176 views

In this video, I show the process of how I create a chip deflector for flat wood turning tools to assist in deflecting dust and painful wood splinters and/or wood chips. This is a super easy and quick project that you can make with materials around your shop. I do not use gloves while wood turning due to safety concerns, so this is a great project for those painful wood chip times on the lathe, say from Wenge wood, or Black palm wood. Important note: these type chip deflectors are not meant to replace personal protection as in face shields, etc. Please wear a face shield at all times when wood

 

Making a Point Tool with Sam Angelo ·
By: WYOMINGWOODTURNER
October 18, 2016 · 10,493 views

Sam makes a point tool from a phillips screw driver. Traditionally the point tool is used in chasing threads with hand tools but is an excellent tool for forming beads and other fine details. Sharpening the Point tool (video) https://www.youtube.com/watch?v g_NLNGxuMO8

 

Shop made Buffing System for Woodturning with Sam Angelo ·
By: WYOMINGWOODTURNER
October 12, 2016 · 5,491 views

Sam shows how he put together a buffing system for under 10. An application that is designed for woodturning but useful for any project that would benefit from buffing. Finishing and buffing supplies at..... Link to Stewart MacDonald http://www.stewmac.com

 

Easy DIY Magnetic Lathe Light | Collab | IKEA x Harbor Freight Hack ·
By: Braxton Wirthlin
September 16, 2016 · 2,815 views

This magnetic lathe light is made form an IKEA Jansjo light and a Harbor Freight disc magnet. I did this down at my buddy Moy's shop. Be sure to check out Moy's video and subscribe to his channel and also check out Patrick's Workshop and watch his video and subscribe to his channel. Moy's video - https://www.youtube.com/watch?v 7HCHyDQ2mRo&feature youtu.be Moy's channel - https://www.youtube.com/channel/UCAVw-zctVVuzY4GjUjIJO6A Patrick's video - https://www.youtube.com/watch?v nEW0yk1BvmM&feature youtu.be Patrick's channel - https://www.youtube.com/user/Patricksworkshop IKEA light - http

 

Make a Lichtenberg Woodburner ·
By: Mike Peace Woodturning
August 26, 2016 · 54,785 views

Make a Lichtenberg wood burner using a neon sign transformer to burn Lichtenberg figures on your woodturning pieces. It can add some incredible embellishment to woodturnings! I show some basics for using safely. These are incredibly dangerous so exercise extreme caution when making and using! Safety tips are included. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Cheap Teleprompter for YouTubers ·
By: Mike Peace Woodturning
August 14, 2016 · 2,175 views

This non woodturning video shows how to make a simple stand to use your laptop or tablet as a teleprompter and a few tips on using to improve your YouTube videos. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Dollar store laser addition. ·
By: MARK Baid
August 01, 2016 · 390 views

So I added this laser from the dollar store to my hauling system. And it works! I'm super excited hope you enjoy the video.

 

Faceplate Mounting Jig ·
By: Jimson's Stuff
July 19, 2016 · 5,018 views

My name is Jim Overton, welcome to my channel. Thanks for watching. Please like, share and subscribe. Disclaimer Woodturning is potentially dangerous! My videos are designed to give viewers creative ideas. The way I work is not necessarily the best or safest way to work! Your safety is your own responsibility not mine. Please follow all safety procedures and wear personal protective equipment. Wear a visor and a respirator dust mask at all times. Be safe, be creative and enjoy your turning.

 

Shop-Made Depth Gauge for Bowls and Hollow forms: by Sam Angelo ·
By: WYOMINGWOODTURNER
July 03, 2016 · 6,290 views

Sam passes on an approach for determining the depth or thickness of a bowl or a hollow form. This simple shop-made device is easy to build and set up----and, it is very accurate. (This is a jig demonstrated at the AAW Symposium in Atlanta).

 

Flip Top Tool Stand ·
By: Peter Matthew
July 01, 2016 · 1,958 views

Check out how I made this awesome flip top tool stand! website: http://www.peterturnswood.com ---------------------------------------------------------------------------------- To see my vlog and follow-up channel, go to my main channel by clicking 'Peter Matthew' up above. On my main channel, look to the right side of the screen where it says 'Featured Channels'. Under 'Featured Channels' is 'Peter Matthew 2'. Click that and subscribe to that channel :) ----------------------------------------­­­­­­­­­­­­­­­­-------------------------­-­-­-­-­-­-­-­-­-­-­-­-­-­- Want to do a sticker swap? Send me an email: peterturnswood@gmail.com Want to send me stuff? Mailing address: Peter Matthew 6388 East Executive Drive Westland, MI 48185 Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080 Subscribe to my YouTube Channel! I post videos every Friday!

 

Lathe Stand Full Build Video ·
By: Keith's Woodwork
June 28, 2016 · 4,553 views

 

Lathe Stand ·
By: Keith's Woodwork
June 26, 2016 · 5,123 views

Awesome lathe stand with storage for tools and chisels. 100lbs. of sand incorporated into a sturdy base

 

Segmented Ring Press ·
By: Turntastic Wood Designs
June 25, 2016 · 2,064 views

A press for clamping rings of a segmented bowl or vase

 

Lathe Tool Holder - Pallet Wood - Woodworking ·
By: Fabian's Tiny Workshop
June 24, 2016 · 5,698 views

I'm making a Pallet Wood Lathe Tool Holder Support me on Patreon: https://www.patreon.com/FabiansTinyWorkshop

 

Eccentric Spindle Woodturning With Infinite Axis Chuck ·
By: As Wood Turns
June 17, 2016 · 3,025 views

http://www.AsWoodTurns.com Since adapting the egg chuck into an Infinite Axis Chuck, I wanted to explore other ways that it can be used. Egg Chuck Video: http://www.youtube.com/watch?v 3VHZgrkwugY Video Making Egg: http://www.youtube.com/watch?v VC1RbHQkU3Q I used hot melt glue to fasten his piece of elm to the chuck's tenon. Then working from the top down, I turned a series of coves and adjusted the axis a little bit with each cove. Each adjustment moved the axis between 90 and 120 degrees and increased offset from the original axis. The finish is friction polish buffed. This turning has no resemblance and no useful purpose. That means it must be pure art. Good turning. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Bach Guitar Calm under license via Adobe Premiere Elements Smart Sound.

 

My Dust Extractor and Camvac Review ·
By: Jimson's Stuff
June 15, 2016 · 7,755 views

This is a review of my dust extractor that I built a year ago. It is powered by a twin motor Camvac dust extractor and incorporates a cyclone prefilter with 3 inch inlet and outlet. I have also incorporated a shop built pressure release valve to stock the drum imploding if there is a blockage. No matter how good your dust extractor is it is important to remember to wear a good quality respirator mask. Thanks for watching Jim Overton Disclaimer Woodturning is potentially dangerous! My videos are designed to give viewers creative ideas. The way I work is not necessarily the best or safest way to work! Your safety is your own responsibility not mine. Please follow all safety procedures and wear personal protective equipment. Wear a visor and a respirator dust mask at all times. Be safe, be creative and enjoy your turning.

 

Lathe Chisel Pull Out ·
By: madronawoodworks
June 14, 2016 · 157 views

Very short video showing my storage idea for lathe chisels.

 

Workshop air cleaner build ·
By: Jack Houweling
June 10, 2016 · 111,126 views

How to build an air purifier with 2 filters. Build article: http://www.jax-design.net/2016/06/make-workshop-air-cleaner.html https://www.instagram.com/jaxdesignnet https://twitter.com/jaxdesignnet Also check out Savvas Papasavva's dust filter- https://www.youtube.com/watch?v uDEHHuBgTxo

 

Triple Lathe Buffer ·
By: George Fotinakes
June 07, 2016 · 1,293 views

Here is a do-it-yourself triple buffing wheel for the wood lathe. A nice professional one can be found at the 'Beall' website for 92. This design can be built for under 20. You will need a Morse taper 1/2 inch drill chuck to hold it.

 

Lathe Improvement for drilling on the lathe ·
By: Lyle Jamieson
June 01, 2016 · 2,994 views

Welcome to my channel. I have been turning all my life and want to share the techniques I discovered over the years. The first 40 videos on my channel were technique oriented showing different parts of the process. Lately, I have been doing project oriented videos. I still hope over the long haul to cover all the techniques over multiple videos. This project format is much better at showing the entire turning sequence start to finish. My focus is on teaching methods of turning that are easy and safe and that are versatile for any kind of turning you wish to pursue. I hope you enjoy my videos,

 

Bedan style Parting Tool ·
By: Brian Havens
May 28, 2016 · 15,011 views

Some time ago, over a year ago, I hinted that I wanted to show what I have done to my unusual looking parting tools. Well I finally got around to explaining what and why I have modified my parting tools. And, of course, I included some example tasks where I often like to employ my 'Bedan' style parting tools—including making captive rings!

 

What is that Screeching Noise? A Chatter Tool ·
By: Mike Peace Woodturning
May 20, 2016 · 10,776 views

Mike Peace demonstrates using and making a chatter tool for decorating woodturnings. Check out our full video catalog of woodturning tutorials at www.youtube/c/MikePeace356 Check out my blog MikePeaceWoodturning.blogspot.com for demonstration handouts, downloadable copies of articles I have published.

 

Forging a Peavey (Cant Hook) ·
By: Frank B
May 17, 2016 · 984 views

A combined woodturning and blacksmithing project.

 

Lathe Tool Caddy ·
By: George Fotinakes
May 12, 2016 · 542 views

Simple inexpensive and compact tool caddy for storing and moving wood lathe tools. This design is suited for medium and small chisels but it can be easily adapted for large size chisels.

 

#111 Silicone Mold Making for Woodworkers ·
By: Stephen Ogle
May 08, 2016 · 22,385 views

In response to requests from several viewers. This video shows my process of making silicone molds for woodworking and woodturning projects.

 

Woodturning With The Naked Turner Quick Look At Segmented Bowl Wedgie Sled ·
By: Erik Anderson
April 30, 2016 · 4,698 views

I do some segmenting, share the finished piece , and discuss the sled a bit. www.segeasy.com and watch Jerry Bennett's Videos called Segmentology

 

Lathe Tool Rest - HomeMade from scraps ·
By: Ray MAKES
April 28, 2016 · 3,084 views

my little tool rest for my homemade 'free lathe'. the tool rest for this lathe is clearly a simple solution but it does work. it is missing the customary vertical adjustment but at the scale of the work planned for this lathe i dont think it will be that critical an issue...if it is ill have to redesign the tool rest accordingly. this little lathe has been a joy to put together and considering it was built from only the parts i had sitting around, it has performed flawlessly. t planning on building a lathe? I have built a few but they were quite technical. i thought it would be interest

 

Lathe Disk Sander ·
By: Donny Carter
April 26, 2016 · 141 views

I used a piece of aluminum, a faceplate, and a few screws to make a 12' disk sander! Thanks for watching! Please share, like, and subscribe! Thanks! http://donnycarter.com/ https://www.instagram.com/donnymcarter

 

Repurposing tools ·
By: Harry’s Woodcraft
April 20, 2016 · 1,124 views

Woodturning: Repurposing Tools Harry’s Woodcraft The Little Garden Shed Workshop, Google https://plus.google.com/u/0/ HarryWatts65/posts Instagram https://instagram.com/harrys_woodcraft/ Twitter https://twitter.com/HarrysWoodcraft Skype Name g0xbl1 I'm supporting, www.ukiws.co.uk Mike, Martin and Steve. Mike: mike@ukiws.co.uk Steve: steve@ukiws.co.uk Martin: martin@ukiws.co.uk Music Humidity - Silent Partner Thank you for watching Please like, share and subscribe

 

Make a Chip Deflector for Easy Wood Tool - Re-edit ·
By: Rick McQuay
March 28, 2016 · 195 views

This chip deflector is a finger saver. When using carbide tools the wood streams directly back toward your hand and, especially dry wood, can inflict thousands of tiny nicks that you won't notice until later when your hand feels like it's on fire. My shields work terrifically, are easy to make, and I highly recommend them. I am still using the same two shields made in this video. This video from 2013 has been re-edited because the first version was poorly done and watching it made me nauseous. The video quality is still 480p and rather poor in spots because it was shot was using an old Canon point and shoot. The build part is slightly abbreviated however I added a video of the deflector in use.

 

Make a Woodturning Scraper from High Speed Steel ·
By: Mike Peace Woodturning
March 17, 2016 · 3,522 views

Mike Peace demonstrates making a specialty scraper from an inexpensive blank of High Speed Steel. He explains where he got the blank, how he shapes it and demonstrates using the scraper. Click here to watch a previous videos on Turning a woodturning tool handle https://www.youtube.com/watch?v qVslsr0PLhY Click here to previous a video Make Your Own Parting Tool https://www.youtube.com/watch?v IbbK02iUj3Q Filmed and uploaded in HD Check out my blog MikePeaceWoodturning.blogspot.com for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers YouTube channel.

 

Getting to the point. Making a point tool ·
By: Rock Springs Woodturner
March 17, 2016 · 731 views

Making to point tool or three point tool for woodturning. Using 1/4' x 8'L HSS blank from Use-Enco.com part #383-7015 The Oneway Thread-Lock Ferrel can be found at Hartville Tool or Oneway's site.

 

#63 Making a Peavey ·
By: Uncle Cys Woodshop
March 07, 2016 · 9,926 views

As I had mentioned in the Trailer video I needed a Smaller Peavey. In this video I build one from scratch. I cut a Catalpa Log on the Band saw, and turn it into a handle on the lathe, weld up the metal parts and assemble it.

 

THE BIG UGLY TOOL by Reed Gray aka Robo Hippy with Randal Dale ·
By: robohippy
February 23, 2016 · 36,281 views

Two notes here. The cold rolled bar stock is a softer metal, which means you don’t want to sharpen it on CBN wheels. I do relieve the heel, just like on bowl gouges on an old standard grinding wheel, or on a belt sander, then sharpen on my CBN wheels. There is minimal loading of the soft metal on the CBN wheels, but thus far, I have never had any problem getting it off by sharpening a regular M2HSS scraper or a V10 scraper. The one that I made where I attached it to the bar stock with JB weld seems to hold up, but the JB Weld left a streak on my CBN wheel. It still seems to cut just fine whe

 

DIY Lathe chattering tool ·
By: The Russian Woodworker
February 22, 2016 · 2,166 views

In this video I will show you a really easy way in which I show you how I make a chattering tool for the lathe for free!

 

I made a Woodturing Parting Tool for Free ·
By: Barry's Workshop
February 19, 2016 · 3,803 views

I made a 1/8' wide parting tool for woodturning using a spare blade that was destined for the landfill. I used a welder to repair and reshape the metal blank. The handle is made from scraps that were in the scrap drawer. Total cost 0. Subscribe: http://www.youtube.com/subscription_center?add_user UCYrXvMdKbXYtONur3rnRHcg 'Danger Storm', 'Pulse Rock' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0

 

Woodshop Tour 07 DIY Steady Rest & Longworth Chuck ·
By: Dipa Das
February 18, 2016 · 9,020 views

How to build Steady Rest & Longworth chuck for less than 15E? :-)

 

Making a paper seed pot maker. - full realtime video ·
By: woodturner21
February 17, 2016 · 6,796 views

This video shows how I make the tool to make the eco friendly seed pots.

 

How to make a Wood Centering tool from a Cherry Pen Blank ·
By: OG Timbercraft
February 12, 2016 · 246 views

How I made a wood Centering Tool from a Cherry Pen Blank Plus Channel Spot Light :Donald Mathews Donald Vlogsify's Wood Shop: https://www.youtube.com/channel/UCBIE... Shot by Orey Garcia on Samsung Galaxy S6 Edited on Sony Imagination Studio Platinum 12 Music is YouTube free to use: Voyeur February 2016 I know to be the one of the best woodworker or one of the top woodworker of you tube you have to learn from the most popular woodworkers and do as they do. I subscribe to over 200 top wood working channels and most of what I show in my video I have learned form them feel free to browse

 

Making Homemade 12 inch Disc Sander Lathe Attachment Part 3 .dust extractor ·
By: Marcello Bianchi
February 05, 2016 · 1,635 views

making Homemade 12 inch disc sander lathe attachment Part 3. dust extractor I've made a disc sanding attachment for my lathe, but it needed dust extraction. I laminated the shape of the disc and made the dust cover out of recycled materials and painted it green to match the lathe. i started by laminating the cowl out of MDf and hot glued it to a back panel that i had cut a hole for the spindle to come through i also cut a bent shape to fit round the motor after hot gluing various pieces of wood to the back panel I took it of the lathe and trimmed the excess off on the bandsaw before flush trimming it on the router i then planed it down to size and fitted a front to it.

 

Woodturning a Chisel Saver ·
By: Barry's Workshop
January 30, 2016 · 590 views

If every woodworker had one of these, just imagine how many bench chisels would be saved! The project is mostly turning a handle. I did add some interest by combining round and square edges, and also a ferrule on both ends. I also got some more skew chisel practice, which is always fun! I had fun making this video. Please comment if you get the joke (or even if you think it 'just isn't that funny'.) And I hope you'll forgive me for waiting until the end to show the big reveal. Subscribe: http://www.youtube.com/subscription_center?add_user UCYrXvMdKbXYtONur3rnRHcg Music: 'Fig Leaf Rag', 'Also Sprach Zarathustra' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 Graphics by Farrin N. Abbott / CopyCatFilms.com

 

Laminating a homemade 12 inch Disc Sander Lathe Attachment Part 2. laminating for a dust extractor. ·
By: Marcello Bianchi
January 29, 2016 · 1,268 views

Homemade 12 inch Disc Sander Lathe Attachment.Part 2 laminating for a dust extractor. Bending laminates.Pt 2 of my disc sander lathe attachment. I've cut up a board of MDF into 4 pieces 2.5x50mm strips to laminate round a former to make a 12inch Arc to cover my home made lathe sanding disc

 

DIY Marking gauge ·
By: Custom Chris
January 27, 2016 · 38,852 views

For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Making Homemade 12 inch Disc Sander Lathe Attachment Part 1 ·
By: Marcello Bianchi
January 22, 2016 · 1,838 views

Making Homemade 12 inch disc sander lathe attachment Part 1. I've made a disc sanding attachment for my lathe Its made out of construction grade plywood with a melamine chipboard table. the table tilt from 90 to 45 degrees and locked in position with shop made screw down knobs.i've incorporated a micro adjustment bolt to level the table at zero which will be the normal position.the table is bolted down to the tool rest attachment that slides along the main body of the Lathe. I've painted the table green to match the lathe and it will get a second coat when the weather improves.check out how I built the bench for it on my channel

 

How to Make a Lathe Steady Rest for CHEAP ·
By: Regan Leatch
January 21, 2016 · 569 views

How to Make a Lathe Steady Rest for CHEAP. Get the cutting template here: https://www.dropbox.com/s/om13mxsesvzgsig/How%20to%20make%20a%20lathe%20steady%20rest%20for%20cheap.pdf?dl 0 Check out more of the stuff I make Here: https://www.facebook.com/reganswoodworkingandwoodturning/ ____________________________________________________________________ Music: Alan Walker - Fade [NCS Release] https://www.youtube.com/watch?v bM7SZ5SBzyY Find the Artist Alan Walker here Facebook https://www.facebook.com/DJWalkzz SoundCloud https://soundcloud.com/walkzz Twitter https://twitter.com/IAmAlanWalker YouTube https://www.youtube.com/user/DjWalkzz ____________________________________________________________________

 

Making a branding iron logo ·
By: Tommy Akridge Designs
January 13, 2016 · 19,596 views

signing your bowls with a branding iron

 

Wood Turning - Spindle Steady Rest build. ·
By: Mike Waldt
January 03, 2016 · 53,518 views

I build a steady rest that was inspired by a video from Stephen Ogle. I have a link below for the in depth step by step build that Stephen did. Stephen's Video - https://www.youtube.com/watch?v -YzyEq77Rt8

 

Small Round Lathe Tools Pt 3 of 3 ·
By: Mike Peace Woodturning
December 31, 2015 · 7,770 views

In this 3 part series I demonstrate how to make a variety of useful, special purpose woodturning tools. They are all made from inexpensive 1/4” round HSS rod. In Part 3, this video, I demonstrate using and making several specialty turning tools . Tools include a cove tool, Cats Claw for captive rings, miniature skewgie gouge, spindle gouge, and vortex tool. Part 1 Using and Making 1/4” round skew is available here https://www.youtube.com/watch?v eBa2eYa5vVc Part 2 Using and Making a Point Tool is available here https://www.youtube.com/watch?v AMogaU6aiI8 Filmed and uploaded in HD Check out my blog for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers channel. MikePeaceWoodturning.blogspot.com

 

DIY Carbide Parting Tool ·
By: Custom Chris
December 29, 2015 · 70,431 views

For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

DIY Turning Tool ·
By: The Russian Woodworker
December 28, 2015 · 604 views

In this video I show you how to make a lathe cutting tool that in store sells for about 50- 100 for about 20- 30. Hope this helps and enjoy. The song is Hope by Tobu from NCS: http://nocopyrightsounds.co.uk/video/tobu-hope-ncs-release

 

Small Round Lathe Tools Pt 2 of 3 ·
By: Mike Peace Woodturning
December 24, 2015 · 7,228 views

In Part 2 of this 3 part series of How to Make Small Round Lathe Tools, I demonstrate how you can make a woodturning Point Tool from an inexpensive 1/4” round HSS rod. I also show how to use this versatile little tool to make V grooves, beads and more. Part 1 on using and making 1/4” round skew is available at https://www.youtube.com/watch?v eBa2eYa5vVc Part 3, Using and making several specialty turning tools is available https://youtu.be/FVBPfkNjGjQ Filmed and uploaded in HD Check out my blog for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers channel. MikePeaceWoodturning.blogspot.com

 

Firewood to Wood Lathe tool ·
By: SP Wood Art
December 23, 2015 · 9,654 views

A great source of cheap wood can come from the most unlikely places. If you do not have access to turning wood where you live, try firewood at your local grocery store. This video will show how to wood turn a piece of firewood from a grocery store into a wood lathe point tool. In addition, this video will briefly explain how to sharpen/grind a point tool and briefly explain how to use a three sided point tool. If you would like see more of SP Wood Art visit us at: www.spwoodart.com www.facebook.com/spwoodart www.plus.google.com/ SPWoodArt1/about www.pinterest.com/spwoodart/ I strive to creat

 

#155 12 dollars mini forge DIY ·
By: Miguel Sanchez
December 21, 2015 · 6,158 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Small Round Lathe Tools Pt 1 of 3 ·
By: Mike Peace Woodturning
December 18, 2015 · 19,576 views

I demonstrate how to make and use a variety of useful, special purpose woodturning tools in this 3 part series . They are all made from inexpensive 1/4” round HSS rod. Part 1 is this video on using and making 1/4” round skew. It is a great little tool for small projects like finials and inexpensive to make. Part 2 Using and Making a Point Tool is available here: https://youtu.be/AMogaU6aiI8 Part 3 Using and making several specialty turning tools is available here: https://youtu.be/FVBPfkNjGjQ Tools include a cove tool, Cats Claw for captive rings, miniature skewgie gouge, spindle gouge, and vortex tool. Filmed and uploaded in HD Check out my blog for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers channel. MikePeaceWoodturning.blogspot.com

 

DIY Welded Toolrest for Wood Mini-Lathe ·
By: Barry's Workshop
December 13, 2015 · 1,772 views

I got tired of the limits of the toolrest that came with my mini lathe so I welded a larger one using some scrap hot rolled angle and steel rod that I had left over from other projects. It's only a few inches wider (8.5' [22cm] vs. 6' [15cm]), but it makes a big difference in being able to turn larger work. I also didn't want to make it too big because my lathe's banjo only has 5/8' [16mm] shaft. Music by audionautix.com. Released under Creative Commons License 3.0.

 

Make a Stop Collar For Your Tool Rest ·
By: RickTurns
December 12, 2015 · 2,499 views

It's easy to make a stop collar for your tool rest post. Very few materials are required and it's fairly quick to turn. A stop collar slides on the post of the tool rest, and can be tightened at any position, allowing the tool rest to be removed and then put back at exactly the same height. Here are links to some of the commercially-available stop collars for tool posts: Rubber Chucky Tool Rest Height Adjust (Step Chucky) http://bit.ly/1Uj9KjS Turners Select Center-Set Post Lock http://bit.ly/1NWrOuM Nova Tool Rest Collar http://bit.ly/1Ma5mwW

 

The Blind Wood Turner - Episode 45 - Captive Ring Tool ·
By: Blind Wood Turner
December 04, 2015 · 1,576 views

In this episode, Chris has his first go with his captive ring tool.

 

Make Your Own Parting Tool ·
By: Mike Peace Woodturning
November 27, 2015 · 7,965 views

I show how to make a 1/8” parting tool for woodturning from a HSS tool blank purchased from Amazon for about 4. The blank is already heat treated so no special metallurgy knowledge required. You may want to watch my video on tool handle making if you have not seen that. https://www.youtube.com/watch?v qVslsr0PLhY You can find the HSS blank using this link to my Amazon shop: https://www.amazon.com/dp/B00HG9W3M6/_encoding UTF8?ref exp_inf_pl_mikepeacewoodturning Check out my blog for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers channel. MikePeaceWoodturning.blogspot.com

 

DIY Pyrography Pen And Tip For My Woodburning ·
By: As Wood Turns
November 27, 2015 · 24,901 views

http://www.AsWoodTurns.com There's still time to enter this year's Christmas Ornament Woodturning Challenge. See https://youtu.be/KnPEz-X-T34 for details and this year's challenge playlist for all ornament video submissions at https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd We appreciate all skill levels and all types of Christmas ornaments. As promised, this is my build video for my DIY or home made pen for pyrography or woodburning on my woodturning projects. This pyrography pen uses; - 6' ” PVC pipe - 6-8 feet 14 gauge insulated stranded wire - Ace Hardware -

 

#52 Gift Project 4 of 4 Shawl pin ·
By: Uncle Cys Woodshop
November 23, 2015 · 2,836 views

Last in the series #4 of 4. This is the Shawl Pin. Because once they have made the yarn, knitted or crocheted a shawl their going to need the shawl pin. (if you don't understand the reference go watch the other videos in the series then you will :-)

 

Homemade Center Finder ·
By: The Small Workshop
November 22, 2015 · 275,082 views

Making a simple, but accurate center finder from scraps of laminate flooring. It will be used mostly for woodturning, to mark the center of blanks. Laminate flooring is a great material for workshop projects since it's basically MDF covered in melamine on both sides. I used the factory edges to get an accurate square then used it's diagonal to mark the 45 degree angle for the ruler. The ruler itself is a piece of leftover aluminum transition strip. If you want to help in the making of these videos you can support me on Patreon: https://www.patreon.com/TheSmallWorkshop?ty h

 

DIY Woodturning Napking Ring Jig / Jig Para hacer Aros servilletas ·
By: Eme SantosH Creations
November 22, 2015 · 577 views

I needed to make Napking rings, but i did not have the way to do it, so i made my own version of a woodturning napking ring jig. I hope that this jig can be usefull for you. Yo necesitaba hacer aros para servilletas, pero no tenia la forma de como hacerlo, así que hice mi propia versión de un jig para tornear aros para servilletas. Espero que este JIg sea de utilidad para usted. My Social Media Facebook: https://www.facebook.com/CuchumilDetallesbyEme Instagram: @emesantoss / @designedbyeme Twitter: https://twitter.com/designedbyeme https://twitter.com/cuchumildetalle E-mail designedbyeme@gmail.com Eme ( _ ) Always smile!!! Music Bottomless Cup by Silent Partner youtube audio library

 

Home Made Vaporizer for Pyrography /Woodburning ·
By: As Wood Turns
November 20, 2015 · 14,621 views

http://www.AsWoodTurns.com There's still time to enter this year's Christmas Ornament Woodturning Challenge. See https://youtu.be/KnPEz-X-T34 for details and this year's challenge playlist for all ornament video submissions at https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd We appreciate all skill levels and all types of Christmas ornaments. As promised, this is my build video for my DIY or home made power supply to use for pyrography or woodburning on my woodturning projects. Graeme Priddle is the source for this design that he called a 'Vaporizer'. This vaporizer u

 

Make a Bowl Depth Gauge ·
By: RickTurns
November 16, 2015 · 2,965 views

Make a depth gauge for determining how deep a bowl or hollow form is.

 

#150 Home made woodturning tools ·
By: Miguel Sanchez
November 16, 2015 · 32,029 views

One tool, seven tips, eleven dollars, cool Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Naked Turner Chatter Tool Canister ·
By: Erik Anderson
October 12, 2015 · 2,157 views

Quick video of a finished chatter tool project.

 

249 rod tool ·
By: Cap'n Eddie Castelin
October 08, 2015 · 19,503 views

This video is about bar stock

 

woodturning chisel holder ·
By: Gary Harris
September 28, 2015 · 395 views

Hi here is a easy chisel holder for your woodturning chisels

 

Woodturning Chisel Rack ·
By: Jake Webb
September 19, 2015 · 1,630 views

A 'make it up as you go' project that came out so much better than I hoped. I think the result is compact and has great function so I had to share it. My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

Lathe Cabinet Build ·
By: Jerry Brown
September 14, 2015 · 1,256 views

I was using the Lathe Cabinet and the drawers fell apart - then the face frame fell off... kept dropping tools and stuff down the dust hole - so I rebuilt it like it should of been built!

 

Small Part Cutting Jig ·
By: Jerry Brown
September 13, 2015 · 1,232 views

Small part cutting sled/jig what ever it is... I had to cut a bunch of blanks for the Kaleidoscopes I was making and felt bringing a big old sled out was not worth the effort...

 

Lathe Tool Rack ·
By: Jerry Brown
September 12, 2015 · 882 views

I made a new tool rack off to the side of the lathe blades up and on a lazy susan! I like it I kept dropping tools that were hitting the storage rack in front of me and this is much better.

 

Lathe Attachment Organizer ·
By: Jerry Brown
September 11, 2015 · 608 views

I am back and have a long list of catch up to do! I have about 200 videos to get before the end of the year and I am gonna try my best to get there!

 

Making my own Woodturning Scraper ·
By: Jake Webb
September 07, 2015 · 3,027 views

Making a Woodturning Scraper from an old chisel. A quick and easy project to add to my turning tool collection. You can never have too many turning tools. My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

DIY Wood Lathe Disc Sander ·
By: George Fotinakes
August 31, 2015 · 3,359 views

A simple method to build a very efficient disc sander & dust pick-up for about 5.

 

12" Disc Sander - ToolMake15 ·
By: Make Crazydays
July 30, 2015 · 3,897 views

I repurpose an old broken lathe and turn it into a 12' disc sander. Made In Wood Tool Make 2015 Announcement https://youtu.be/O7cVYTEIf4A Made In Wood Tool Make 2015 Entry http://www.womadeod.co.uk/p/blog-page_3.html Homepage: http://make.crazydays.org Shop: https://make.crazydays.org/shop/ Instagram: https://www.instagram.com/makecrazydays

 

Light Duty Work Platform ·
By: RickTurns
July 19, 2015 · 1,417 views

Make a light duty work platform for stationary marking and detailing on workpieces, particularly when indexing.

 

#24 Scratch Awl Kit ·
By: Yuval Lahav Woodturning
July 16, 2015 · 11,043 views

It only took me 7 months, but I'm finally turning the scratch awl I won in Carl and Alan 2014 Christmas ornament challenge! Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Swear and Shake - Suddenly Kevin MacLeod - Slow Burn All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Wood Turning On A Budget: Custom Tools ·
By: Kachille Crafts
July 13, 2015 · 200 views

A few custom lathe tools I made from old screwdrivers and chisels. These works as a good interim tool until you can afford better.

 

#22 Off Topic : DIY Calipers ·
By: Yuval Lahav Woodturning
July 04, 2015 · 5,325 views

What do you do when you find you need a tool you don't have, and you can't find it locally or can't wait for shipping? Break out your DIY tools!! Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Pierce Murphy - Versailles Ryan Little - Get Up All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Extension Lead for a movable Tool Stand ·
By: PeteTGIF
June 27, 2015 · 351 views

Steve French asked us to show our shop improvements in his video: https://youtu.be/N_tZ6bEqDcA ------------------------------------------------ Here's what I made. In order to have the floor free from extension cords I mounted an extension lead to my Tool Stand on wheels. Visit the channel from Steve and Woody. Like and subscribe and leave him a comment. https://www.youtube.com/user/blockyimage ------------------------------------------------ DISCLAIMER! If you're not trained in electric work, don't do this by yourself, ask a friend with the proper tools to help you doing electric work! -----

 

Wood bowl jam chuck ·
By: Wes Pilley
June 19, 2015 · 274 views

How I hold bowls to clean up the bottom.

 

Multi-Use Swivel Base ·
By: Gord Rock
June 13, 2015 · 7,416 views

A swivel base to hold items for carving. Can also be used to hold a small bench vise and other items.

 

Bottlestopper draw bar ·
By: Jim Meier
June 12, 2015 · 780 views

A short video showing how to make an inexpensive system for holding a bottle stopper blank on the lathe using a 3/8' #2 MT collet, some threaded rod, a threaded knob and your lathe.

 

Naked Turner How To Make Your Own Honing Wheel DIY ·
By: Erik Anderson
May 25, 2015 · 106,129 views

Video of a new DIY honing wheel

 

2x4 Bangle-Chucks - Entry for the Creative 2x4 Competition 2015 ·
By: PeteTGIF
May 25, 2015 · 2,074 views

As I went into making bracelets with my miter box, I thought about some chucks. As decent chuck start selling at about 250 EURO over here in Germany I thought about making my own. I chose spruce, as this is flexible enough to expand with the cone shaped screw without breaking. To qualify as an entry for Summers Woodworking's third annual creative 2x4 Competition Contest the video has to be less than 10 minutes, so I had to edit some parts out of it. I hope you get inspired to make some tools on your own, they might be not that versatile, but do exact what you want from them. For the ones inter

 

Hack together a burning wire tool ·
By: RickTurns
May 21, 2015 · 28,901 views

Make a quick and easy burning wire tool to burn decorative lines into woodturnings.

 

An update to my chuck removal tool ·
By: RickTurns
April 28, 2015 · 743 views

I've made a couple of minor changes to my chuck removal tool that make it slightly better.

 

Make a Headstock Spindle Washer ·
By: RickTurns
April 20, 2015 · 3,231 views

Make a non-stick washer for your headstock spindle. Save 1's of dollars! Keep that chuck or faceplate from welding itself onto your headstock.

 

Turning a Wood Lathe Hand Wheel ·
By: Ed Krystosek
April 20, 2015 · 1,670 views

My lathe needed a hand wheel on the tail-stock...so I made one.

 

Homemade Spinning Bowl Sander ·
By: Marius Hornberger
April 20, 2015 · 175,327 views

Support me here: https://www.patreon.com/mariushornberger?ty h or support me through my Amazon wishlist:https://www.amazon.de/gp/registry/wishlist/2CHXL814961N7/ref nav_wishlist_lists_2 Link to the plans (page size A4): https://www.dropbox.com/s/rowm657wy7bgs2e/Homemade%20bowl%20sander%20plans.pdf?dl 0 More links to materials I used in my sander built: Velcro: http://www.klettladen.de/product_info.php/products_id/325 Sandpaper disks: http://www.werkstatt-store.de/Schleifmittel/Schleifscheiben/ Sandpaper rolls: http://www.amazon.de/s/ref nb_sb_noss_1?__mk_de_DE %C3%85M%C3%85%C5%BD%C3%95%C3%91&url search-alias%3Daps&field-keywords Haftschleifpapierrolle

 

Make a Chuck Removal Tool ·
By: RickTurns
April 17, 2015 · 2,139 views

This chuck removal tool makes easy work of dislodging a woodturning chuck that has 'frozen' onto the lathe headstock spindle. It is easy and quick to make.

 

Repurposing Old Gouges ·
By: Brian Havens
March 20, 2015 · 7,527 views

See how old gouges can be repurposed as small beading tools.

 

Make a tool rest - part 6 - Brazing ·
By: RickTurns
March 19, 2015 · 6,290 views

In this sixth and final video in my series of videos about making a tool rest (without welding!), I braze the arm to the post, and then the wear strip to the arm. After cleaning up the new tool rest, I cut and adjust the height on the lathe. The manufacturer's video on using the oxy-mapp torch is here: https://youtu.be/a38PdQkcInA Jan 23 2016 - this just in! Lyle Jamieson passed on a suggestion to put a wedge of wood in the right angle of the angle iron, so that if the tool slips off the end (or even the lip) of the rest, you'll be less likely of catching a finger or two. Sounds like a good idea to me.

 

Depth Gouge For Depth Stop On A Drillbit ·
By: PeteTGIF
March 19, 2015 · 954 views

After a couple of mishaps I came up with the idea of this jig. With it I'm able to set up the metall depth stop on a drill bit. I usually use the depth stop drilling free hand holes for dowells or a center hole on a bowl blank to mark the depth of the inside before hollowing out the inside. As I made this, I remembered Chris Fischer who recently turned a bowl. Incredible Job, but he had some problems finding the right depth for the inside. I'll send him this jig and a set of the three depth stops, so he'll be able to drill a precise hole and I hop he'll be able to improve on making his bowls.

 

Vacuum Hose Holder....Quickest Setup ·
By: Jack Houweling
March 14, 2015 · 19,045 views

Easy to make vacuum hose holder. It has rare earth magnets so it can sit on metal table tops or can be clamped on a workbench. http://www.jax-design.net https://www.facebook.com/pages/Jaxdesign/512430528895179

 

Woodturning Destroying A Gouge ·
By: Custom Chris
March 13, 2015 · 37,641 views

Bowl Gouge http://www.amazon.com/Hurricane-Woodturning-Reach-Gouge-Speed/dp/B00GWR2MJW/ref sr_1_22?s power-hand-tools&ie UTF8&qid 1426043843&sr 1-22 For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Part 2 of 3 When to Use the Right or Left Notch Blade ·
By: Paul Crabtree
March 12, 2015 · 218 views

When to Use the Left or Right Blade

 

Make a tool rest - part 5 - Cutting ·
By: RickTurns
March 10, 2015 · 3,498 views

In the fifth video of my series on how to make a tool rest for your woodturning lathe (without welding!), I show how to cut the metal pieces for the tool rest, how to square off the top of the post, how to tap the hole in the top of the post, and where to drill the arm.

 

Shop made 3/4 Bowl Gouge by Al Furtado ·
By: Rebel Turner
March 07, 2015 · 7,265 views

I had a piece of steel in my shop that had a good beginning to make a 3/4' bowl gouge. set up on a steel handle. I was applying my grinder in a slight angle to create that U shape. I would use it parallel at times just to create a deeper V than grind away again in an angle where the grinder disk would hit the front and back of the flute at same time forming the U

 

Make a tool rest - part 4 - Sizing ·
By: RickTurns
March 04, 2015 · 6,180 views

In the fourth video of my series on how to make a tool rest for your woodturning lathe (without welding!), I describe how to determine the best height for the tool rest post.

 

Reed Gray aka Robo Hippy Presents: The Chain Saw Chop Saw ·
By: robohippy
March 02, 2015 · 10,943 views

Robo Hippy has done it again, he has gone and built his own Chain Saw Chop Saw, a great time saver for any busy wood shop. Check out this product too: The Haddon Lumber Maker http://www.haddontools.com/lumbermaker.html

 

Make a tool rest - part 3 - Materials ·
By: RickTurns
February 28, 2015 · 6,855 views

In the third video of my series on how to make a tool rest for your woodturning lathe (without welding!), I describe the materials (primarily steel) needed to make the toolrest, including the average costs and several online sources. As mentioned in the video, here are URLs for various sources of steel and silver braze: Online Metals (metals) http://bit.ly/1E5nQAr Metals Depot (metals) http://bit.ly/1Ao3kDx Speedy Metals (metals) http://bit.ly/1zOizqj Enco (metals) http://bitly.com/1DmE8iT MSC (metals) http://bitly.com/1BqQF8h Airgas (for silver braze) http://bitly.com/189BEMa

 

Make a tool rest - part 2 - Tools ·
By: RickTurns
February 27, 2015 · 7,933 views

In the second video of my series on how to make a tool rest for your woodturning lathe (without welding!), I describe the different tools you'll need to do the work, including the most likely costs and several online sources. Here are some links for tool sources: For the Oxy-MAPP torch kit http://bit.ly/1AR99gt http://bit.ly/1E3ImRX http://bit.ly/1DZdbFO For the 4 1/2 inch angle grinder http://amzn.to/1EU9hwq http://thd.co/1MYhc1c For the tap-drill combo http://amzn.to/1BGNk6O http://thd.co/1wupGs4 For silver brazing material http://bit.ly/1BGMWp0 http://bit.ly/17Dgx4O

 

The Blind Wood Turner - Episode 22 - DIY Dust Extraction ·
By: Blind Wood Turner
February 27, 2015 · 956 views

In this installment, I show you how I made a cheap and simple dust extractor using my old Wet 'n' Dry vac.

 

Make a tool rest - part 1 - overview ·
By: RickTurns
February 25, 2015 · 27,120 views

Woodturning: Make a tool rest of any length for your woodturning lathe, using silver brazing. No welding required! Jan 23 2016 - this just in! Lyle Jamieson passed on a suggestion to put a wedge of wood in the right angle of the angle iron, so that if the tool slips off the end (or even the lip) of the rest, you'll be less likely of catching a finger or two. Sounds like a good idea to me.

 

Pen Drilling Chuck ·
By: Jerry Brown
February 14, 2015 · 1,871 views

Project #45 of Polly Wants A Crafters 365 in 2015 - a Pen Drilling Chuck for my Harbor Freight lathe. It is not too bad for a first test, the pen blank is drilled fairly straight a bit loose but usable. This is to inspire all the guys out here to not rely on spending hundreds of dollars on crazy tools but to make what you have help you.

 

Homemade DIY Tap Holder (cheap and simple) ·
By: Marius Hornberger
February 10, 2015 · 92,842 views

Knob templates: https://www.dropbox.com/s/n7igjuhw5u5j5pv/Knob%20temblates.pdf?dl 0 This is a very simple project, that everyone can make with a hacksaw and a file. Shouldn't take longer than an hour.

 

Lathe Stand Drawers ·
By: Jerry Brown
February 06, 2015 · 1,018 views

Making Drawers for the lathe stand - note: DO NOT use the saw and heater... and if you switch to drawers instead of doors make sure you have KNOBS! :) Typical day at the shop but cold and finishing off the lathe stand to e more Purty!

 

Wood turning money saving shop made tools ·
By: Rebel Turner
February 02, 2015 · 7,163 views

Wood turning tutorials as well as tool modifications I show a few tools that I have made in my shop as well as repairing and replacing parts that might save you some money as well as give you satisfaction of making it yourself.

 

Lathe Table ·
By: Jerry Brown
January 22, 2015 · 2,407 views

Lathe Table - or Stand... I am not sure why but it kept asking for more of me ... something supposed to be simple and no, stop doing the insulation and shop renovations and work on this! The new lathe table/stand has a bbuilt in dust chute on the back, no more pile up of wood chips and with the lathe rack mounting to the wall behind it I can keep the surface area clean!

 

DAW-3-Point Tool ·
By: Roger Meeker
January 22, 2015 · 3,676 views

Detroit Area Woodturners present Alfred Schembri demonstrating how togrind and use a 3-Point Tool

 

How To Make A Lathe Rack ·
By: Jerry Brown
January 19, 2015 · 1,265 views

Collaborating with Brian Gidney of Summers Woodworking to make a lathe tool rack

 

Making a beam compass ·
By: Rick McQuay
January 14, 2015 · 1,871 views

Old video that I wasn't going to publish since I'm just remaking John Heisz' beam compass but I haven't released a video in awhile so why not. Made from recycled furniture wood, species unknown. All music by Brenna McQuay playing the dulcitar.

 

Turn an Awl ·
By: Mike Peace Woodturning
January 11, 2015 · 57,451 views

Mike Peace demonstrates how to turn an awl handle on the wood lathe and explains the benefits of a square point birdcage awl. He explains why you should have an awl, why they make great gifts and why they are a great beginner woodturning project. Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support!

 

A Curved Bevel Parting Tool ·
By: RickTurns
January 05, 2015 · 5,354 views

Woodturning: Grind a curve on one surface of your diamond parting tool for smoother cutting.

 

Depth Gauge in use ·
By: Jake Gevorgian
January 03, 2015 · 4,017 views

sorry for the high pitch sounds in the workshop.

 

Making a depth gauge for setting the initial guiding depth of hollow forms in woodturning ·
By: Jake Gevorgian
January 03, 2015 · 5,313 views

Initial guiding depth with a drill bit can contribute an accurate start of hollow forms in woodturning. This simple gauge can be helpful for this purpose. The materials I used are ' thick steel bar, and a set of self tapping nut and a thumb screw. Please feel free to ask questions. Here's a video where I'm showing the use of the depth gauge http://youtu.be/zjSt5Z4gdlM

 

Homemade Lathe Disc Sander with Changable Grits ·
By: Kevin Hou
December 14, 2014 · 3,588 views

This is a disc sander that I made out of very limited supplies and tools. It utilizes the lathe's functionality to make a completely working disc sander. I also thought up a way of easily switching grits/discs. This way the sandpaper can easily be replaced when it wears out. Features: Completely functioning disc sander Efficient, quick-change design Supports multiple grits and discs (double sided discs as well) Easy to make and easy to use Very cheap and affordable If I were to do this project again, I would probably try and make the disc a little bit bigger. Also, I might go out and buy materials so that all my screws are uniform, etc. (I used scraps and screws I found here and there) Enjoy! My project portfolio is: http://kevinhou.wix.com/projects Here is the link to my blog, Flickr, Github, etc. http://khou22.github.io/ I have galleries and blog posts that highlight my wood, electronics, programming, and metal projects.

 

Make a steel M5 Mandrel on your wood lathe ·
By: Kerry Harrison
December 10, 2014 · 2,342 views

A demonstration using a collet chuck to drill and tap a steel rod on a wood lathe. The mandrel made in the video is used for a making a top but they have many other uses.

 

Bushing for 3/8 Woodturning tools ·
By: Kerry Harrison
December 04, 2014 · 920 views

This bushing allows 3/8' diameter tools to be mounting in a handle or tool holder with a 1/2' ID bore. An example would be mounting our Mid Size Tools in the Full Size Handle or the Simple Hollowing System tool holder. Any 3/8' diameter can be used with this bushing. Specifications: ID - 3/8' OD - 1/2' Overall length - 2 3/8' Flange - OD 3/4' Flange thickness - 1/16' Material - Steel

 

Regrind Your Parting Tool for a Cleaner Part-off Cut ·
By: RickTurns
November 23, 2014 · 11,447 views

Woodturning: See how you can can regrind the cutting tip of your parting tool to get cleaner part-off cuts. Music courtesy of audionautix.com

 

DIY - Disc Sander on Lathe ·
By: Dipa Das
November 08, 2014 · 3,080 views

Short video how i build Disc Sander on Lathe

 

Day two turning a column on the home made lathe ·
By: MARK Baid
November 04, 2014 · 584 views

Finishing the column with the help of my friends

 

Turning an 8' post on my home made lathe! ·
By: MARK Baid
November 02, 2014 · 460 views

Taking a trip to Jamie's to turn an eight foot 6'x6' post for habitat for humanity

 

2014-10-10 Making Lathe Tools by Bob Black ·
By: Gwinnett Woodworkers
October 12, 2014 · 32,505 views

http://www.gwinnettwoodworkers.com Making Lathe Tools by Bob Black 10-10-2013 Bob explains how you can make small hollowing tools, thin parting tools using a variety of metals from cold rolled steel to HSS. He demonstrates making a tool handle. He explains the process of using silver solder to braze HSS to softer cold rolled steel. Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Resizing a Tenon and redefining the form profile ·
By: Nubsnstubs
September 24, 2014 · 444 views

This is merely a description using my Chuck Plate to remount this form to remake the tenon to fit my chuck. While resizing the tenon, I decided to refine the shape. As we all know as woodturners, once it comes off the lathe, it will more than likely not be that perfectly centered form that was just removed to reverse turn it. This video is actually the beginning of a 2 hour 35 minute video, but only shows the first 19 minutes. If you have any interest in the Chuck Plate, contact gmwoodworking78@msn.com for any questions you may have. Visit my new website at www.woodturnerstools.com. It's still a work in progress, but there is a contact page. Thank you for watching. .... Jerry

 

Woodturning BuckSaw ·
By: Custom Chris
September 23, 2014 · 1,532 views

Fun project to make Feel free to take my idea and improve on it For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Update To My DIY Lathe Steady Rest ·
By: As Wood Turns
September 04, 2014 · 6,544 views

http://www.AsWoodTurns.com I've been using my home made steady rest for over a year. During this time, I've thought of a couple of improvements: 1) Use locknuts in place of the nuts. Vibration in use caused nuts to come loose and fall off. 2) Replace the base that mounts it to the lathe so that I can place the tool rest closer to the project and the steady rest. Other than the nuts, replacing the base was the easy part. I still needed the steady to be adjustable so the key upgrade was a coupling assembly. This assembly enables the steady upright to be attached to the base but enables adjustmen

 

Wood Turning Grinder Stand ·
By: frank howarth
August 16, 2014 · 128,920 views

I have made a stand for my grinder that I use for sharpening my wood turning tools. The stand is a plywood box with shelves on the inside. On the top, the grinder sits on an old growth fir cap that is flush with the box. Two bolts hold the wood cap and grinder to the plywood box. On the front is a door to access the shelves inside of the box. In the bottom of the box is a space I have filled with drain rock to give weight to the bottom of the stand.

 

Making A String Steady Rest For Woodturning ·
By: Gord Rock
August 10, 2014 · 77,048 views

Showing how to make a String Steady Rest that I use when turning a finial.

 

Building A Steady Rest For Woodturning ·
By: Gord Rock
August 04, 2014 · 10,364 views

How to build a steady rest for your wood lathe.

 

Make a Wood Screw Tap ·
By: Jack Houweling
July 26, 2014 · 246,781 views

I show how to make a tap for wood screws. Very easy to make and best used for hardwood. http://www.jax-design.net

 

How to Make Your Own Scratch Awl ·
By: ShowMe Woodworks
June 17, 2014 · 4,870 views

In this video I take an old junk screw driver and make it into a nice wood handled scratch awl. Email: Faserwoodworking@gmail.com Facebook: https://www.facebook.com/Showmewoodworks

 

Making a Simple DIY Vacuum Chamber from a few parts and a pickle jar ·
By: Turning Round
June 15, 2014 · 6,461 views

In this video I show my setup for a simple vacuum chamber using a vacuum pump, a filter, a ball valve, and a pickle jar and a canning pan as the chambers. I will be using this vacuum chamber for stabilizing pen blanks for wood turning. Use to degas resin that is cast in molds.

 

Homemade Bowl Gouge ·
By: Custom Chris
June 13, 2014 · 3,846 views

Quick and dirty Bowl Gouge

 

make your own 2" sanding disks for bowl sanding ·
By: Adam Woodturner
June 04, 2014 · 1,265 views

made my 2' sandpaper disk cutter off 2 1/8' hole saw grind the teeth off and sharpen the saw like a blade. Tags: woodturning, turning sanding disks - Captured Live on Ustream at http://www.ustream.tv/channel/woodturningwood

 

Make a Chip Deflector for Easy Wood Tools ·
By: Rick McQuay
May 30, 2014 · 917 views

Update: Click this link for a re-edited and better version of this video. https://www.youtube.com/watch?v KzWKO6Koszw Sorry about the low resolution, this is an old video that I never posted and I wanted to try the trial version of Power Director. I'm glad I chose a short video, let's just say I'm not in love with the program.. A very simple and quick project that will protect your hands from chips flying off the lathe. Music credit: 'Cigar Box Blues' by Brenna McQuay

 

#36 Building a Shopmade Air Cleaner Part 2 ·
By: Stephen Ogle
May 19, 2014 · 36,699 views

This is my version of a shop dust collector from mainly salvaged Part 2. The cabinet and filters. Part 1 is here http://youtu.be/PmcqGl7Alz0

 

#35 Building a Shopmade Air Cleaner Part 1 of 2 ·
By: Stephen Ogle
May 19, 2014 · 142,330 views

This is my version of a shop dust collector from mainly salvaged part. Part 1 shows the design and build of the impeller. Part 2 The cabinet and filters are here http://youtu.be/6IXuDOuKZEc

 

Woodturning a Scratch Awl ·
By: Cip's Wood Chips
May 03, 2014 · 16,955 views

I made a new wood handle scratch awl from a plastic handle model. I prefer a large handle old fashion type.

 

# 223 The Old Soft Touch ·
By: Cap'n Eddie Castelin
April 16, 2014 · 15,669 views

I was asked to explain this gadget and it's manufacture. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

#86 Calibre de grosor gratis - Thickness caliper on the cheap ·
By: Miguel Sanchez
April 01, 2014 · 11,044 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Otro truco facil y util para seguir con la serie. Espero que os sirva. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Wood Turning, Making a Magnetic Chip Deflector ·
By: Gabe Castro
March 26, 2014 · 220 views

How to make a Magnetic Chip Deflector. Click link for Adhesive Backed Sand Paper: http://amzn.to/2guuv3i

 

#83 herramienta casera de perfilar - homemade spindle tool ·
By: Miguel Sanchez
March 24, 2014 · 18,501 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Hola Familia, Esta semana una herramienta sencilla de fabricar para aumentar nuestro arsenal, sobre todo aquellos que necesitais herramientas economicas. Espero que os guste. Video para afilar nuestras herramientas: https://www.youtube.com/watch?v ldSc7xTn0MM http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Make a Removable Wood Tool Handle for Woodturning Tools ·
By: Cindy Drozda
March 06, 2014 · 54,161 views

Using the Aluminum Handle Adapter, I show you how to make a removable wood tool handle for Woodturning Tools. The Adapter with set screws is perfect for scrapers with rectangular tangs. One handle can be used for several tools, and gouges can be reversed into the handle to protect the edge for travel. Please take a moment to visit my website, http://www.cindydrozda.com for more information about my life, Artwork, Instructional Woodturning DVDs, Signature Turning Tools, and Woodturning Supplies. Aluminum Handle Adapters are available for online ordering here: http://www.cindydrozda.com/html/Handle_Adapters.html Questions and Comments are invited. Happy turning, everyone!

 

#11 Homemade Woodturning Tools and Fixtures ·
By: Stephen Ogle
December 01, 2013 · 68,997 views

This video is in response to some questions about some of my shop made turning tools.

 

A Portable Cart for Woodturning Tools ·
By: Master Carpenter
November 21, 2013 · 91 views

 

Working with Steel for Making Wood Turning Tools ·
By: DentonTurners
November 06, 2013 · 18,716 views

Low carbon steel, high carbon steel, high speed steel -- UGH!! Which one do I use to make wood turning tools? Do I need to heat treat the tools? Phil Joines helps us understand the properties and use of each of these types of steel. He also talks about when and how to heat treat the steel as we are making tools. This presentation was recorded November 2013 at the monthly meeting of the Golden Triangle Woodturners in Denton, Texas. Find out more about our club at www.goldentrianglewoodturners.org

 

# 199 Piercing on the cheap ·
By: Cap'n Eddie Castelin
October 21, 2013 · 9,330 views

Want to get into piercing art work, I give you a cheaper option Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

# 190 Reversing your lathe ·
By: Cap'n Eddie Castelin
September 26, 2013 · 7,187 views

Have a Jet mini with variable speed and you want to reverse it? Here are the instructions and I show off a new tool. Big Guy Productions is at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

Fluteless Gouge Tips by Robo Hippy ·
By: robohippy
September 07, 2013 · 20,368 views

 

HOMEMADE WOODTURNING TOOLS PART:4 SHAPING EXTENDED DRILL SHANK DETAIL CUTTERS ·
By: sjm2inok
August 28, 2013 · 18,467 views

In this video I show how I shape the drill shank into detail cutter bits that go into the aluminum and PVC handles. With the long drill shanks I shape one end with a 'fingernail' style grind and the other end I shape a 'spindle' style grind. I don't show the final sharpening on the Jet slow-speed wet grinder using the Tormek jig. If anyone wants to see that process send me a message and I'll do a video on that process. These drill shank cutters are excellent for small detail cutting and deep sharp grooves, I also a short demo on how they cu in a piece of hard wood. These cutters are very sharp and keep a good cutting edge. As with any cutting tool, wear safety glasses and USE CAUTION.

 

My DIY Lathe Steady Rest ·
By: As Wood Turns
August 27, 2013 · 20,940 views

http://www.AsWoodTurns.com After using my new steady rest turning the travel mug, many viewer requested more information about the steady rest. So here we go. It's make from Baltic birch plywood with layers glued together as necessary for thickness. The wheels came from a pair of roller blades I purchased at a local thrift store. It works fine except I'd like to be able to more my tool rest closer when the steady is near the end of the workpiece. I think it can be much closer. But before I modify the base, I'd like your ideas. I used 1/4 inch hardware. I will be doubling the nuts to prevent them from loosening. I will appreciate all comments and suggestions for improvements. Thank you in advance. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

HOMEMADE WOODTURNING TOOLS:PART3, SHARPENING CARBIDE SCRAPERS, DRILL SHANK DETAIL TOOLS ·
By: sjm2inok
August 21, 2013 · 18,016 views

In this video I'll show you how you CAN resharpen carbide shear scrapers...you can resharpen carbide shear cutters as well by using the diamond disk on the bevel only. I will also show how you can make two-in-one detail scrapers/cutters using 1/8', 3/16' and 1/4' extended drill bit shanks and these tools will fit in the homemade tool handle adapters and handles shown previously. In the next video, uploaded soon, I'll show how I grind the drill shank bits to use as scrapers and I will demo them on a piece of hardwood. I hope my ideas will inspire others to stop spending a fortune on commercial tools and enjoy the benefits of making tools tailored to your specific needs.

 

Easy DIY System For Eccentric Spindle Turning ·
By: As Wood Turns
August 20, 2013 · 3,063 views

http://www.AsWoodTurns.com In this video, I'm going into greater detail on the faceplates and system used in making the doubly eccentric magic wand. The system consists of 2 faceplates, 4 brass pins, and some plastic countertop laminate. With the system, I can exactly index most eccentric spindle turnings that use a tail stock. Although I made these faceplates for magic wands, now I can many, many other uses to make repeatable successful eccentric turnings. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

# 181 Perfect Tenons ·
By: Cap'n Eddie Castelin
July 25, 2013 · 14,712 views

This is very old tip, I was asked to do more detail on it. I hope you make a set and use them to help with your perfect work. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

# 178 Drop A Nut! ·
By: Cap'n Eddie Castelin
July 15, 2013 · 11,970 views

A simple trick for eliminating the nut on your pen mandrel. Something you can make in just a few minutes. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

# 174 Detailing with a burr ·
By: Cap'n Eddie Castelin
July 03, 2013 · 4,760 views

Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

Home Made Tenon Tool ·
By: RJBWoodTurner
June 10, 2013 · 8,286 views

This video shows how to make and use a tenon tool made from an open end wrench. This tool is useful for turning tenons on pens and other turnings, it will give a uniform sized tenon every time.

 

Easy DIY Tenon Cutters for Woodturning ·
By: As Wood Turns
June 07, 2013 · 20,007 views

http://www.AsWoodTurns.com I cut tenons regularly to join different pieces of a project together. They're a common element but I really hate it when I cut one too small. The flip side is stopping the lathe so often to creap up on the perfect size. Many times I've used a open end wrench to help size. But a viewer suggested I grind an edge on one side of the wrench. Then I'd have a tenon cutter and a tenon sizer in one tool. So here we have a set from 1/4 inch up to 3/4 inch made from a cheap set of end wrenches. Grinding was not as simple as I had thought but not so complex in the end. All it took was a little time at the grinder. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

HOMEMADE WOODTURNING TOOLS, PART2, GLUING, DRILLING AND TAPPING HANDLES ·
By: sjm2inok
June 05, 2013 · 12,630 views

Just a short video of gluing in the aluminum adapter and drilling and tapping for the tool shaft. The next few videos will be making the interchangeable cutter tip tool shaft, some of the different cutters I use and if video time allows I will show how I make some of the drill bit grinds.

 

HOMEMADE WOODTURNING TOOLS, PART1, HANDLE ADAPTER ·
By: sjm2inok
May 26, 2013 · 15,495 views

This video is on turning the aluminum tool shaft-to-handle adapter. I omitted the drilling part since I didn't want WD40 slung all over the new camera. As mentioned, the aluminum round rod is 6061 T-651 Extruded from onlinemetals.com, there's no need for more expensive 7075.

 

A SHORT VIDEO ABOUT MAKING TOOLS ·
By: sjm2inok
May 04, 2013 · 2,299 views

Just wanted to let y'all know that a series of videos on making your own tools, cutters, adapters, etc soon with a better camera.

 

31 - Woodturning - Repairing/Making a Marking Knife ·
By: Steve Emmons
April 17, 2013 · 49,837 views

In this video I'll take the blade from an iGaging marking knife with a broken and handle and make it functional again by turning a new handle with a copper ferrel

 

2012-12-13 Home Made Lathe Tools by Turning SIG (1h29m20s) ·
By: Gwinnett Woodworkers
March 31, 2013 · 17,261 views

Turning SIG 12-13-12 GWA Turning SIG members reveal homemade lathe tools with an emphasis on use, grinding and sharpening techniques. Full Video (1:29:20) Filmed and uploaded in HD.

 

Home-made woodturning tools ·
By: sjm2inok
January 22, 2013 · 60,678 views

These are just a few of the woodturning tools I've made to save money over the name brands out there. Most are designed for hollowing small vessels, bowls, etc. The shafts made from 1018 Cold Rolled

 

Making a small "better" Awl ·
By: Jack Houweling
January 20, 2013 · 84,290 views

A new awl, good grip, smaller, more precise.

 

#151 Soda Blaster Primer ·
By: Cap'n Eddie Castelin
December 03, 2012 · 22,319 views

I used a soda blaster to clean a forstner bit and got questions on how it works, etc.

 

TurningTool ·
By: OzWorkshop
October 27, 2012 · 516 views

Turn broken tools into use again...

 

#145 Detailing Duo ·
By: Cap'n Eddie Castelin
October 22, 2012 · 14,109 views

two new tools for detail work. Available on or before 11/7/12 order now at website. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

Turning support for turning longer pieces ·
By: Segmentedturning
October 04, 2012 · 391 views

This is a video to show you my home made turning support, it gives very good support and just gives that little bit of comfort that the piece will stay centered. see http://www.segmentedturning.co.uk

 

How to find the center of a dowel ·
By: Jack Houweling
September 30, 2012 · 168,644 views

http://www.jax-design.net/ Dowel center locator. An easy way to mark center of dowel. Here is a tool that is easy to make to help you.

 

Wood Turning - Shop Made Chatter Tool ·
By: Mike Waldt
September 09, 2012 · 21,939 views

I made this video as a result of watching a video by Australian Woodturner Brendan Stemp, which I found on Alan Stratton's Channel (As Wood Turns). Thanks to you both!

 

A DIY Home Built Tapping Fixture ·
By: SegmentedTurner
July 22, 2012 · 8,796 views

Here's a simple and useful tapping fixture you can make to be sure your tap is held perpendicular to the part being worked on. Particularly useful with small taps.

 

#123 Soft Touch Tip ·
By: Cap'n Eddie Castelin
April 05, 2012 · 11,989 views

How to make 'Soft Touch' tips for your revolving center

 

121 Fingernail Gouge final ·
By: Cap'n Eddie Castelin
March 17, 2012 · 6,319 views

I removed the free handle offer and put a regular ending. This is a great technique for finishing some bowl bottoms.

 

The Center For Art In Wood Philadelphia, PA 2012 ·
By: David Termini
March 10, 2012 · 438 views

The Center For Art In Wood Philadelphia, PA 2012 A nice place to visit in Philly esp if you are a wood lover. The best of the best and more

 

# 118 knockout bar ·
By: Cap'n Eddie Castelin
March 03, 2012 · 10,305 views

How to make a knockout bar for your lathe. More like a project of turning corian being held on a bar

 

#117 headstock handwheel ·
By: Cap'n Eddie Castelin
February 27, 2012 · 20,431 views

A handwheel for your headstock or a faceplate. Both use a common nut from MSC direct as a thread base.

 

Couple of Tools That I Made Recently ·
By: Jake Gevorgian
February 23, 2012 · 3,620 views

Showing a point tool and captive ring tool. Sam's YouTube channel http://www.youtube.com/user/WYOMINGWOODTURNER/videos

 

Turning a Froe Club for Riving Wood ·
By: Matt Rushing
January 12, 2012 · 2,755 views

How I make a Froe Club for use in splitting out Windsor Chair parts. Piece is White oak split from a log and then turned on a lathe to form the club.

 

shop made hook tool ·
By: Tom F
December 12, 2011 · 1,088 views

 

Shop Made Thin Parting Tool ·
By: Carl Jacobson
November 02, 2011 · 30,075 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. Shop made thin parting tool for 6.00 and scrape wood. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

#100 Woodturning 101 Tools, Chapter one ·
By: Cap'n Eddie Castelin
October 07, 2011 · 28,484 views

First chapter on tool selections

 

#100-B Woodturning 101 Tools, Chapter Two ·
By: Cap'n Eddie Castelin
September 23, 2011 · 24,212 views

The second half of the tools you will need to start with

 

#86 Concentric Cube Tools ·
By: Cap'n Eddie Castelin
June 17, 2011 · 7,311 views

How to make you own tool to turn this piece and also a mulit putpose tool.

 

82 Fingernail gouge details ·
By: Cap'n Eddie Castelin
May 13, 2011 · 37,359 views

How to sharpen and use a fingernail gouge.

 

Off center sphere cup center ·
By: aesop717
May 11, 2011 · 254 views

Off center sphere cup center.

 

2011-04-12 CanonG11-DelVal-WoodturningCenter-Walter Balliet Exhibit ·
By: Jeffrey Schnell
April 17, 2011 · 576 views

This is a video of the pictures I took at The Woodturning Center Of Walter Balliet Exhibit on 2011-04-12

 

73 techniques.avi ·
By: Cap'n Eddie Castelin
April 01, 2011 · 24,468 views

Equipment prep, using a gouge for a scraper and a new texturing tool you can make and save you 25 All in one video. Great deals on cutters at www.eddiecastelin.com

 

Making a wooden tailstock cone center ·
By: Bob Hamilton
February 26, 2011 · 80,309 views

This video demonstrates making a wooden cone shaped sleeve to go over your tailstock live center. This is a very handy accessory as shown in my videos about making candlesticks and making napkin rings.

 

roughing gouge shield.avi ·
By: Cap'n Eddie Castelin
December 20, 2010 · 10,043 views

A simple block of wood in your roughing gouge deflects chips away from you and your face. Take a peek, give it a try.

 

thinpartingtool#2.avi ·
By: Cap'n Eddie Castelin
November 29, 2010 · 33,577 views

How to make your own really thin parting tool. For under 10.00.

 

finetuningpenvise ·
By: Cap'n Eddie Castelin
November 29, 2010 · 9,455 views

HOw to make your pen vise a slide out bottom to save bits.

 

phi-calipers.avi ·
By: Cap'n Eddie Castelin
October 14, 2010 · 21,596 views

How to make a set of calipers to assist you in determining the golden Mean in your work.

 

woodturning project - han`s woodturning tool (hobytool) ·
By: 이종현
September 11, 2010 · 2,319 views

han s woodturning study http://blog.naver.com/lgm2017.do korean woodturner - Gun Moo Lee

 

Woodturning - Homemade Ring Tool ·
By: teksu313
August 25, 2010 · 38,215 views

Ring tool made from bearing.

 

Woodturning with the Tracy Owen Finishing Tools ·
By: Craft Supplies USA
August 05, 2010 · 12,138 views

In this woodturning video, we'll show you how to shear scrape with the Tracey Owen Finishing Tools. Buy now: https://www.woodturnerscatalog.com/p/129/4468/Henry-Taylor-Tracy-Owen-Finishing-Tool?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Tracy Owen Fine Finishing Tools offer a truly innovative approach to maximizing the benefits of shear scraping. It's no secret that properly done, shear scraping can produce a silky smooth finished surface more consistently than any other turning method. In fa

 

make your own parting tool for cheap ·
By: TheFishingschool
April 05, 2010 · 6,213 views

this is how i made a cheap parting tool its not the greatest but i am not the best either so its all good sorry for the bad audio i am getting a new camera soon

 

David Termini's Homemade Wood Turning Tool.mov ·
By: David Termini
December 24, 2009 · 32,057 views

David Termini's Homemade Wood turning Tool is shown here simply made from 36 inches of galvanized pipe two set screws and a piece of carbon steel broken out from a old craftsman tool. This is a wonderful tool for all kinds of turning especially for beginners.More info To extend bit further out I put pipe in vise and grip bit with vise grips and tap with hammer. I made my bit from a craftsman carbon steel turning tool bought on ebay and smacked the wood handle off with a hammer. this steel is my favorite for scraping tools . I think it's far superior to most other steel except Thomson tool steel http://www.thompsonlathetools.com/ .Any questions just ask, Thanks,Dave

 

David DeWitt woodmachinest and Inventer ·
By: David Termini
November 05, 2009 · 2,960 views

David DeWitt made this device from parts he found at yard sales. It cuts even spaced groves and different profiles into wood that has been turned on the lathe. The possibilities are unlimited. David Is quite the genus when it comes to inventing things.

 

Beall tap Segment 3 ·
By: Bob Hamilton
August 17, 2009 · 3,613 views

Segment 3 of 3 of a video demonstration of using the Beall wood tap to make a wooden jam chuck.

 

Beall tap Segment 2 ·
By: Bob Hamilton
August 17, 2009 · 4,447 views

Segment 2 of 3 of a video demonstration of using the Beall wood tap to make a wooden jam chuck.

 

Beall tap Segment 1 ·
By: Bob Hamilton
August 17, 2009 · 5,669 views

Segment 1 of 3 of a video demonstration of using the Beall wood tap to make a wooden jam chuck.

 

Special vice for odd shapes ·
By: SegmentedTurner
June 17, 2009 · 6,549 views

Here's a set of vice jaws you can make for your segmented turning or any project that requires clamping odd shaped objects. For more information about my work please visit my web site at http://www.DWMontville.com.

 

Making of a Steady Rest ·
By: WoodenNicol
April 02, 2009 · 26,846 views

From Start to finish, making a lathe steady rest.

 

Custom Woodturning Tool ·
By: SegmentedTurner
February 14, 2009 · 71,452 views

This is a demonstration video of my custom designed and produced woodturning tool. They're great for roughing and hollowing. For more information about my work please visit my web site at http://www.DWMontville.com.

 

make you own thin parting tool ·
By: Cap'n Eddie Castelin
September 01, 2008 · 80,865 views

Make you own thin parting tool (Stott) using a edger blade and parts from a hardware for under 6.00. In less than an hour

 

How To Make A Pin Chuck ·
By: Carl Jacobson
February 23, 2008 · 88,379 views

How To Make A Pin Chuck. This chuck is used to make duck calls on the lathe. If you make this project I'd really like to see it, you can always share your project on my website. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Ro

 

Return to Turning Videos

Great Bargains


Heavy Duty Live Center

On Sale for only $16.53

List Price: $19.95

Click here for more information or to purchase

 


Dremel Rotary Tool Kit

On Sale for only $139.00

Save $60.99 (30%)

List price: $199.99

Click here for more information or to purchase


Roller Stand

On Sale for only $23.79

Save $6.11 (20%)

List Price: $29.90

Click here for more information or to purchase

 


Easy Wood Tools - Easy Start Rougher + Finisher + Detailer

On Sale for only $159.99

List price: $206.97

These tools have the smaller 9" maple handle and are 12.5" overall.

Click here for more information or to purchase


NOVA 48232 G3 Reversible Wood Turning Chuck

On Sale for only $99.00

Save $60.99 (38%)

List price: $159.99

Click here for more information or to purchase

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Imaginlay
From Walnut to Antlers
Artisan Ideas

(Click any Ad to go to our Sponsor's Website)