Woodturning Online Videos

Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Dust Protection Videos (49)

Sort by

Or click here to: Search All Videos

Dust Collector Reparation Project 95
By: Andreas Achleitner
April 06, 2018 · 68 views

Hello my friends. Today I repaired my dust collector. Som bigger wood pieces found the way inside the machine and damaged the plastic. I used Epoxy http://amzn.to/2oGoroH to fix the wood. In my videos I use following tools Clamps http://amzn.to/2BNy3E1 Glue http://amzn.to/2BAprUE Sanding Paper http://amzn.to/2ByYl09 abrasive fleece http://amzn.to/2n18c5i Grind Machine http://amzn.to/2DgSXj4 Bosch PTS 10 Table Saw http://amzn.to/2sRz3q0 Holzmann VD 1100 Lathe http://amzn.to/2BQDAtH M33 Chuck http://amzn.to/2DzTMCF Gouches http://amzn.to/2DljLxz Scheppach Planer http://amzn


Dust Masks
By: Brendan Stemp
March 23, 2018 · 3,238 views

After 30 years woodturning I have used a few dust masks. Here is my opinion on some of them.


Thin baffle dust seperator by Al Furtado
By: Al Furtado
December 31, 2017 · 3,743 views

I decided to make my version of a thien baffle dust separator. It's important to verify your angle on the table saw Made the first set of staves with the wrong angle.


Automated Dust Collection
By: Turntastic Wood Designs
December 21, 2017 · 787 views

Automatically turns on the dust collector and opens the proper blast gates when a tool is turned on.


Fixing a broken dust collection hood
By: Gabe Castro
December 18, 2017 · 51 views

How to fix a broken dust hood on mini lathe.


Wood Turning - Trend Airshield Pro Overview and GIVEAWAY!
By: Mike Waldt
December 09, 2017 · 6,978 views

##### GIVEAWAY ENTRIES NOW CLOSED###### ##### GIVEAWAY ENTRIES NOW CLOSED###### Trend: https://www.trenddirectuk.com/air-pro-airshield-pro-respirator-kit-with-8hr-battery Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk/ Makers Central YouTube Channel: https://www.youtube.com/channel/UCJSreLjUhGr927JMvtRIKXA Makers Central website: http://www.makerscentral.co.uk/ NZ Woodturning: https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA


Wood Turning - The Trend Air Stealth Half Mask - My Overview
By: Mike Waldt
December 04, 2017 · 5,895 views

My overview of the recently released Trend Air Stealth Half Mask. Trend: http://www.trend-uk.com/en/UK/productlist/2/97/air_stealth.html Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk/ Makers Central YouTube Channel: https://www.youtube.com/channel/UCJSreLjUhGr927JMvtRIKXA Makers Central website: http://www.makerscentral.co.uk/ NZ Woodturning: https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA


By: Vinces WoodNWonders
November 06, 2017 · 199 views



DIY Dust Collector Remote Switch
By: Turning Round
October 20, 2017 · 3,285 views

In this video I make a heavy duty DIY Dust Collector Remote Switch. I use the basic parts of an electric cord a remote control Christmas light switch and a contactor. This is a cool project as it will allow safe and fast remote control of my dust collection system. I is part of the evolution of my shop build process. Here are the parts I usd to build this. Plus a Heavy Duty Electric Cord. Packard C240B Packard Contactor 2 Pole 40 Amps 120 Coil Voltage href 'https://www.amazon.com/gp/product/B004Z0RLL2/ref as_li_tl?ie UTF8&camp 1789&creative 9325&creativeASIN B004Z0RLL2&linkCode as2&tag t


Wen 3-speed Wood shop Air Filtration Model #3410 Unboxing, Installation, and Review
By: Myers Woodshop
October 19, 2017 · 5,030 views

Watch as I unbox the Wen 3-speed air filtration system and install it in my woodshop. At less than 30lbs. this was a breeze. Wen 3-Speed Air Filtration System: http://amzn.to/2zjUheS WEN 90243-027-2 5-Micron Outer Air Filters, 2-Pack: http://amzn.to/2Bk91Mm WEN 90243-026-2 1-Micron Inner Air Filters, 2-Pack: http://amzn.to/2A4pKFk FILMING GEAR Panasonic Lumix (main camera) : http://amzn.to/2BVA9nH Rode Microphone : http://amzn.to/2HQxdcv GoPro Hero 5 Black : http://amzn.to/2CMWi43 Neewer 62'/158cm Camera Tripod : http://amzn.to/2COtEQo Neewer 31.5'/80cm Camera Track Dolly Slider Rail System : http://amzn.to/2BTKJv7 Find Me On The Internet: Instagram http://www.instagram.com/myerswoodshop @myerswoodshop Facebook https://www.facebook.com/myerswoodshop Website http://www.myerswoodshop.com Etsy http://www.etsy.com/shop/benmyerswoodshop


Woodturning or Woodworking - Improve your Dust Collection
By: Peter Woodbine
September 27, 2017 · 61,925 views

Making a Dust Separator / Baffle / Cyclone unit. I did a bit of research on YouTube and the internet on this subject to find lots of different ideas and opinions on what works best. Make a Thien-baffle unit, a Cyclone or just 2 pipes into a bucket? All seem to work to an extent. So then I went ahead and made my own version with some inspiration from many but a lot from Marius Hornberger, especially design of the inlet. Thanks Marius. Link - https://youtu.be/hebWtarFp5I Music on this video all from Audioblocks


Dust Collection Systems from Laguna
By: WoodWorkers Guild Of America
August 02, 2017 · 8,548 views

Effective dust collection in your shop is very important. Remember that reaction to dust is a cumulative thing. Not reacting today doesn’t mean you won’t become reactive in the future. The lesson out of this? Take care of your lungs by making certain you have good woodworking dust collection on your tools. Laguna Tools has introduced three new dust collectors that are worth a look. This video provides you with an overview of the three models. Features Each of these Laguna dust collectors has features that will keep them effectively working, and grabbing dust, in your shop. Depending on which


#132 Upgrading My Shopmade Cyclone Dust Collector
By: Stephen Ogle
June 16, 2017 · 5,017 views

Experiencing a catastrophic failure of my wooden impeller inside my shop built dust collector. I put my other projects on hold to get this upgrade completed. I changed the motor from a 1 HP AC to a 2.5 HP DC motor with a speed control to prevent any further impeller failures. This video explains how I did this. Enjoy!! See the whole build at this playlist: https://www.youtube.com/watch?v EcCvj34-4xk&list PLGsnYf7PysCQ1S_mgY1JggDaHfyPd3KPo


Big Sweep Lathe Dust Catcher
By: PeachtreeWoodworks
June 15, 2017 · 1,638 views

The Big Sweep eliminates dust while sanding on your lathe. It is completely adjustable and can be positioned anywhere. NOW AVAILABLE! Get yours here... http://www.ptreeusa.com/dust_hoods.html#385


Wood Turning - The JSP Powercap Active IP Powered Respirator
By: Mike Waldt
March 02, 2017 · 8,091 views

An overview of the JSP Powercap Active IP Powered Respirator. The Toolpost: https://www.toolpost.co.uk JSP: https://www.jsp.co.uk


Face Shields Buyer's Guide
By: Craft Supplies USA
January 24, 2017 · 16,996 views

A face shield may be the single most important piece of safety equipment for woodturners. Visit us: https://www.woodturnerscatalog.com/t/89/Safety-Supplies?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Protect the crown of your head and face while woodturning with a quality face shield. All of our face shields meet the ANSI Z87 safety rating. We'll compare the Apprentice Face Shield, 3M Tuffmaster and the Bubble Visor. Craft Supplies USA (The Woodturners Catalog) carries the largest selection of wood


#3 Axminster APF 10 Evolution respirator box opening review #1
By: Greenvill Woodturning
September 07, 2016 · 6,722 views

Useful Links to powered respirators: http://amzn.to/2bXCmo3 The Axminster APF10 Evolution is the same as the JSP PowerCap: http://amzn.to/2c4pF6P


Pallet Up Cycle Challenge 2016 Dust Separator
By: Custom Chris
August 20, 2016 · 18,037 views

Sterling's Channel https://www.youtube.com/user/SterlingsWoodcrafts Play List https://www.youtube.com/playlist?list PLVRSIqwQ1XHq95MdlOeOe7k6kwq4sUbGi


Cyclone Dust collector
By: 207 Made
July 24, 2016 · 318 views

Cleaning my shop using my cyclone dust collector https://www.facebook.com/207-Made-112917125483794


dust hose
By: Steve Krumanaker
May 18, 2016 · 993 views

Short video showing the arm that holds my dust collector hose. Easy and cheap to make. Got the idea from this video by Carl Jacobson https://www.youtube.com/watch?v wciN-oArkTQ


Dust Collector 2 Shop Update
By: Turntastic Wood Designs
March 21, 2016 · 797 views

I completed the duct work for my dust collection system. Please visit my etsy shop at https://etsy.com/shop/TurntasticWoodDesign


Anti Fog Heavy Duty Dust Masks
By: Vinces WoodNWonders
February 06, 2016 · 1,648 views

A brief description of our Anti Fog Heavy Duty Dust Masks available in 2 versions.


Cyclone dust separator
By: Boston Woodturning
January 28, 2016 · 405 views

Setting up a cyclone dust separator and shop vac with 30g fiber drum for woodturning shavings


7163 3M Full Face Respirator: Review by Sam angelo
January 16, 2016 · 5,557 views

I review a nice 3M full face respirator that I recently purchased. So far it is working out very well and offers both eye and lung protection. Great for spraying (vapors) as well as for sanding.


Home made shop air filter for dust collection
By: Gabe Castro
January 02, 2016 · 4,225 views

how to make a home made ceiling dust collection for around 15.00 with used home furnace filters


Alex Amoruso - Homemade dust collection hood for woodturning lathe
By: Ocean Woodturners
November 19, 2015 · 1,975 views

Alex Amoruso explains how to use and build a homemade dust collection hood which gets mounted on a lathe at the Ocean Woodturners November 2015 meeting in Rumford, RI. For more information visit http://www.oceanwoodturners.com


Testing the Modified Harbor Freight 2HP Dust Collector
By: Peter Matthew
September 04, 2015 · 7,449 views

Here's the test run of my modified dust collector. I built a thein baffle for this dust collector and made up a stand so that I can mount the impeller and motor above the thein baffle. This way, all the chips pass through the thein baffle and only the fine airborne dust goes to the impeller and into the bag. All heavier chips drop into the trash can. The thein baffle slows down the airflow inside the trash can so that the chips don't get whipped up and continue with the airflow. --------------------------------------------------------------------------------------------------- contact me: peterturnswood@gmail.com my eBay store: http://www.ebay.com/usr/dste6080


Modifying a Harbor Freight 2HP Dust Collector Making a Thein Baffle
By: Peter Matthew
September 04, 2015 · 7,935 views

I made a thein baffle for my harbor freight dust collector out of a steel trash can. I made this so that I can modify my dust collector to a two stage. ------------------------------------------------------------------------------------------------------------ Stumpy Nubs Thein Baffle video: https://www.youtube.com/watch?v G5Thu... ---------------------------------------------------------------------------------------------------- Contact me: peterturnswood@gmail.com My ebay store: http://www.ebay.com/usr/dste6080


A comparison of the Airshield and Airshield Pro helmets
By: RickTurns
August 16, 2015 · 10,647 views

In this video, I compare the original Airshield face and dust helmet to the more recent Airshield Pro helmet. Both helmets provide full-face protection from flying debris and air filtration to protect from dust.


Filtracià n y Circulacià n de Aire
By: Daniel Vilarino
August 10, 2015 · 1,694 views

Hola/Hi! ***This video is in Spanish, if you prefer to watch it in English, please click in the following link: http://youtu.be/9vUIOj5chWE *** Este video es en Español. Como consecuencia de algunos comentarios de suscriptores, que me solicitaron que mostrara el sistema de filtrado de aire, acá va este mini video. Tenía que cambiarle el filtro y aproveché a filmar unas pocas escenas. Disculpas por las imágenes borrosas, por lo general filmo desde un trípode y no estoy acostumbrado a hacerlo desde la mano. :) ***Answering the request of several subscribers in their comments, that asked about


A Week in the Shop Dust Collector Upgrade Workshop Improvements EXTRAVAGANZA!!!!!
By: Peter Matthew
June 12, 2015 · 5,926 views

Check out my eBay store: http://www.ebay.com/usr/dste6080 Your purchases there will help support me, my hobby, and my workshop. This week I got a LOT done in my shop. I wanted to take a week off from a project and just work on some stuff that I've been wanting to do for a long time. I worked on my dust collector, finished painting my shop, got a shop vac, boarded up some holes on the wall I painted (I didn't show that in the video), and finally made a TON of dust!


#71 My Shopmade Dust Collector Follow Up
By: Stephen Ogle
April 20, 2015 · 10,736 views

This video is a follow up to my Shop Built Cyclone Dust Collector Series. It features improvements and modifications after some viewer suggestions and a Catastrophic failure of the impeller. It also covers the way I plumbed in the duct system and electrical grounding to dissipate static buildup. Hope you enjoy watching.


#70 My Shopmade Cyclone Dust Collection System Part 4
By: Stephen Ogle
March 30, 2015 · 7,540 views

Final assembly and testing. Woo Hoo!! I have a real dust collection system in my shop. Something I have needed for a long time.


#69 My Shopmade Cyclone Dust Collection System Part 3
By: Stephen Ogle
March 30, 2015 · 8,521 views

Continuing with Part 3 of 4. Initial testing of the motor and impeller. Building the filter box. Building the Cyclone intake nozzle and circulation reduction baffle. We are getting close.


#68 My Shopmade Cyclone Dust Collection System Part 2
By: Stephen Ogle
March 29, 2015 · 9,512 views

Part 2 of 4 includes the design and building of the impeller housing, balancing the impeller, and drive shaft stabilization.


#67 My Shopmade Cyclone Dust Collection System Part 1
By: Stephen Ogle
March 29, 2015 · 14,759 views

Part 1 of 4 in this series covers my plan as to how I will build my new Dust collection system from scratch. Beginning this build with a high volume wooden impeller. Part 2 will be uploading shortly.


The Blind Wood Turner - Episode 22 - DIY Dust Extraction
By: Blind Woodturner
February 27, 2015 · 1,041 views

In this installment, I show you how I made a cheap and simple dust extractor using my old Wet 'n' Dry vac.


Dust Collection Upgrade
By: Quarter Inch Off
February 25, 2015 · 261 views

In this video I expand my dust collection and trash can separator to add a 2 1/4 inch hose for general shop clean-up. I added a few connectors, 2 blast gates and attached a 2 1/4 inch hose. --------- If you found this video informative, instructional, entertaining or just plain cool, then please click LIKE. Also if you have not yet, please subscribe to my channel by hitting the subscribe button. -------- Disclaimer: Wood working is dangerous, know your equipment and operate it safely. These videos are meant to share my methods, failed attempts to inspire others to try their own thing. To help others gain confidence, learn from my mistakes and form their own techniques.


Axminster hobby dust extractor review
By: JuniorTurner01
February 18, 2015 · 1,893 views

The Axminster hobby series do a fantastic range of machinary including the new extractor which I am reviewing.


Do-it-yourself Wood lathe dust collector
By: George Fotinakes
January 26, 2015 · 21,491 views

Two simple but very functional designs for a vacuum hose dust collection on a wood lathe.


Woodturning - Cyclone Vac Clean Up
By: BMac Woodturning
October 20, 2014 · 806 views

I created this video with the YouTube Video Editor (http://www.youtube.com/editor)


Trend Airshield Pro
By: Axminster Tools & Machinery
September 04, 2014 · 13,773 views

A fully protected powered respirator for use with all woodworking, building maintenance, DIY, agriculture and craft applications - a wood turners favorite. Suitable for use when machining MDF, dust particals, powder applications, fertilisers and splashes to the face. Approved to new standard BS EN 12941. Excellent protection for the face and lungs is achieved by several key features. Twin filters that are 98% efficient and stop the inhalation of harmful dust by giving a constant flow of filtered air across the face driven by a quiet running fan whilst the combination face-seal ensures no


Dust Collector
By: Levier Fine writing Instruments
July 15, 2014 · 410 views

Levier Fine Writing Instruments present the Dust Collector Rikon and Dust Deputy is a perfect combination for our application


Completion of the Cyclone Seperator Dust Collector, the Turbulator 4000 Part3
By: Turning Round
June 08, 2014 · 17,453 views

This is the final show for the Turbulator 4000. It is done and ready for installation. This shows the cage and the way the whole home build cyclone separator dust collector works together. Make sure to watch my other two videos about this cyclone: Building a Cyclone Separator Dust Collector code named the Turbulator 4000 Part I


Building a Cyclone Separator Dust Collector code named the Turbulator 4000 Part2
By: Turning Round
May 07, 2014 · 36,042 views

In this video I continue the Cyclone Dust Separator build. I am showing the flexible hose that I will use as the connection between the Cyclone and the Garbage can,


Building a Cyclone Seperator Dust Collector code named the Turbulator 4000 Part I
By: Turning Round
March 07, 2014 · 313,356 views

In this video I show all the initial steps and pieces I use to construct a cyclone dust separator for my wood shop. I am using standard building materials and starting from scratch. I am using a design from Bill Petz, and some things I had laying around the shop. This build has turned out to be way more than I ever expect it would be. I have three videos that show the construction of this project. This is not a dust deputy, or a real clear view cyclone, but I am hoping it works well and stays on budget. Here is some additional info in a second video http://youtu.be/Ship5867jgI Completion video http://youtu.be/FWauZHjjhaA


Trend Airshield Pro Smart Charger
By: Mike Peace Woodturning
February 07, 2014 · 10,081 views

This video explains how to adapt a readily available smart charger to charge a Trend Air Shield Pro. This overcomes the deficiencies with the 'dumb' charger that comes with the Trend Air Shield that leads to premature battery failure. The charger is a Tenergy Smart Universal Charger for 2.4V - 7.2V (Red). Want to support my channel? Buy this product through my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support!


A Simple Dust Collector
By: Angus Pitt
January 08, 2013 · 9,576 views

This video is about A Simple Dust Collector made out of a wheelie bin


Trend Airshield Pro (personal air filtration system)
By: Craft Supplies USA
April 05, 2012 · 17,914 views

The Trend Airshield Pro takes comfort and protection for woodworkers to a whole new level. Learn more: https://www.woodturnerscatalog.com/p/89/566/Trend-Airshield-Pro?utm_source youtube&utm_medium description&utm_campaign videos Please Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Designed to provide maximum protection while being comfortable enough to wear for extended periods of time, this system offers many benefits not found in other powered respirators. • Twin filters with 400% larger filtration area provide superior protection against harmful dust down to


Return to Turning Videos

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Cindy Drozda
Carter Products
Sheffield Woodturning

(Click any Ad to go to our Sponsor's Website)