Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Choosing Tools Videos (14)

Sort by

Or click here to: Search All Videos


DETAIL GOUGE---WoodTurning Fundamentals Sam Angelo
By: WYOMINGWOODTURNER
October 11, 2015 · 18,436 views

Sam shows the 'detail' gouge in comparison to a spindle gouge. He demonstrates two ways to sharpen the tool and turns a finial. There are some very nice closeups of this tool and how it is used to create coves, beads, and other details in woodturning.

 

Woodturning: Which Tools Should You Buy?
By: Roundabout Woodworks
May 13, 2015 · 10,260 views

What do I have against cheap tools, and are they useless?

 

FUNdamentals of Woodturning: Basic Woodturning Tools #3 part 2
By: WYOMINGWOODTURNER
March 14, 2015 · 9,032 views

MY LIST.... of starter tools for woodturning. Every new turner must decide which tools to buy. A good video for those new to woodturning.

 

Where to buy turning accessories
By: JuniorTurner01
February 14, 2015 · 66 views

Where to buy tools, blanks and machinary

 

Tool Recommendations for the Beginner
By: Brian Havens
January 28, 2015 · 124,554 views

For beginning woodturners, selecting your first set of tools can be overwhelming. Check out what four tools that I think will best serve someone just starting out in woodturning—and why. The first three are predictable, but my fourth pick and one omission might surprise you. Opening Tool: Ashley Iles 1/2' long and strong spindle gouge

 

Getting started in woodturning
By: JuniorTurner01
January 25, 2015 · 141 views

What you need and where to get it for woodturning. It's all here so don't worry

 

Selecting a Wood Lathe
By: WYOMINGWOODTURNER
January 22, 2015 · 85,309 views

In this informal discussion, Sam Angelo covers some key factors in selecting a wood lathe for his shop. Lathe features and functions are important to consider before you make that final selection. This video is a 're-make' of the original.

 

Robo Hippy presents Must Have Tools
By: robohippy
September 23, 2014 · 6,780 views

Reed Gray aka Robo Hippy shares a few of his ' must have in the shop' tools.

 

Glenn Lucas Woodturning signature tools
By: Glenn Lucas
July 15, 2014 · 82,787 views

To View the full range of Glenn Lucas Signature tools or to purchase see http://glennlucaswoodturning.com Available in the USA http://www.woodturnerscatalog.com/Sales/23/Glenn-Lucas-Signature-Tools?ilsource handtools&iltype banner Available in the UK from the Tool post

 

Basic lathe and tool buying guide
By: Carl Jacobson
July 23, 2012 · 25,495 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. Basic lathe and tool selection for the beginning wood turner. Leah Larson http://www.youtube.com/watch?v 1C-eys43EgY&feature plcp - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - - #woodturning #woodturning #woodlathe #woodturningprojects #carljacobson

 

WOODTURNING on the Lathe: TOOL REVIEW
By: WYOMINGWOODTURNER
July 12, 2012 · 3,042 views

Review of basic woodturning tools. Sam shows the main categories of woodturning tools and the 'grind' on each: bowl gouges, spindle gouges, scrapers, parting tools, and others.

 

Wood Turning For Beginners - The Lathe
By: Mike Waldt
June 22, 2012 · 81,566 views

My guide to choosing your first lathe, based on my experiences during the short time that I have been wood turning. I hope it helps you to make the right choice.

 

Selecting a Lathe - Bowls or Large Work
By: American Association of Woodturners
March 02, 2012 · 3,655 views

Beth Ireland provides tips on how to select a lathe for bowls or other large work.

 

Selecting a Lathe - Architectural Items
By: American Association of Woodturners
March 02, 2012 · 2,189 views

Beth Ireland provides tips on how to select a lathe to turn architectural items. Learn more about the American Association of Woodturners at woodturner.org.

 

Return to Turning Videos

Great Bargains
(ends November 27, 2019)


Customized Electric Branding Iron

On Sale for only $99.99

Save $20.00

List price: $119.99

This customized, 110V electric branding iron will let you imprint your woodturnings in way that will never fade away. You will be able to order from fifteen different standard-size design choices, enter your custom text and proof the final design. The delivery of your custom burning head will take 2 - 3 weeks.

Click here for more information or to purchase

 


Rockler Mini Carbide Pen Turning Tools

On Sale for only $149.99

Save $70.00

List Price: $219.99

This three piece set has comfortable rubber handles which provide excellent control and reduce fatigue—replaceable carbide tips require no sharpening. The 3-piece sets comes with diamond, square and round carbide tipped tools.

Click here for more information or to purchase

 


Bar Tool Turning Kits

Get the 5 Piece Set for only $68.95

Save $15.00

Everything you need to turn out cocktails that friends will rave about—includes all five of their Bar Tool Turning Kits in one cost-saving package. Includes: bottle opener, double jigger, muddler bar, bar spoon, cocktail strainer and 5 threaded inserts.

Click here for more information or to purchase


Pen Press/Drilling Jig

For only $89.99

Save $10.00

List Price: $99.99

Drill and assemble your pens perfectly with flush fittings and a smoothly-operating mechanism! This dual-purpose jig takes care of both prep work and assembly. It holds your blank firmly in position for drilling, creating a precise, perfectly centered hole the entire length of the pen. Later, it smoothly presses your parts together without any bowing or misalignment. Notched jaws automatically center the blank for drilling, while two countersunk holes center the parts during assembly. Large clamping wheel provides slow, controlled pressure so you'll never crack a casing again.

Click here for more information or to purchase


Trend® Air Circulating Airshield Pro

For only $369.99

Save $30.00

List Price: $399.99

Protect your lungs, face and eyes during virtually any woodworking task with the air-circulating Trend® Airshield Pro. Its built-in fan circulates filtered air to prevent fogging, provide cooling and protect users from dust particulates down to 0.6 microns in size at a 98% efficiency rate. This model also meets ANSI Z87+ standards for eye-protection. It features an improved headband with a ratchet suspension and pivoting nape back strap for enhanced comfort, fit and durability. The nickel metal hydride battery allows for up to eight hours of operation on a full charge, twice the length of previous models. Includes a charger, airflow indicator and pre-installed plastic film overlay to prevent buildup of sap after heavy turning jobs, and to prevent scratching.

Click here for more information or to purchase

Great Bargains
(ends December 24, 2019)


Denim Woodturner's Apron

On Sale for only $17.99

Save $12.00

List price: $29.99

This is a one-size fits all, heavy duty denim apron with a soft-cloth collar and criss-cross shoulder straps. It even includes a pencil pocket.

Click here for more information or to purchase

 


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase

 


Sorby 6-Piece Woodturning Set with Book and DVD (Woodturning: A Foundation Course)

For only $229.99

Save $100.00

List Price: $329.99

Robert Sorby's flagship set of turning tools is designed to fill the needs of woodturners from beginner to professional. These high-quality tools will shorten the learning curve for those just starting out, and are sure to impress the seasoned woodturner. The set comprises six of Robert Sorby's core range of tools: a roughing gouge, spindle gouge, bowl gouge, skew, parting tool and scraper. Each tool is crafted from the highest quality high speed steel, and married to a comfortable handle turned from solid ash. The set arrives in a high quality box that provides an attractive presentation as a gift, and practical storage thereafter.

Click here for more information or to purchase


Dust Right® Lathe Dust Collection System

For only $39.99

Save $20.00

List Price: $59.99

This highly adjustable steel boom arm holds a semi-cylindrical dust scoop that closely cups your small turning projects, capturing nearly all dust!

Click here for more information or to purchase


Excelsior Mini Lathe

For only $229.99

Save $70.00

List Price: $299.99

The Excelsior 5-Speed Mini Lathe can turn bowls of almost 10" in diameter and spindles up to 17-3/4" in length, making it perfect for chair legs, small table legs and an endless array of decorative turnings. A convenient door provides easy access to the belt, along with 5 different speeds: 760, 1100, 1600, 2200 and 3200 RPM. Cast-iron body provides mass for minimal vibration, stable turning and maximum durability.

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Hunter Woodturning Tools
Woodturner's Tools
Flutemaster

(Click any Ad to go to our Sponsor's Website)