Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Thread Chasing Videos (68)

Sort by

Or click here to: Search All Videos


Easy threading of boxes and lids
By: Windy City Woodturners
February 22, 2018 · 428 views

illiana Woodturner members Ray Luckhaupt and Joe Schlawin demo the Hope Easy Set Threading Jig. They will discuss setup and cutting threads. As an added feature Joe shows using a fly cutter to both set the exact diameters for threading the male and female threads.

 

January 2018 Notes From The Wyomingwoodturner Sam Angelo
By: WYOMINGWOODTURNER
January 08, 2018 · 3,587 views

Sam shares some of his recent activities and what might be in store for 2018 at his shop in Wyoming. Please subscribe..... To see my work visit www.samangelo.com wyomingwoodturner.com Also.....if you are in the market for the Amazing Off-Center Chuck by Ron Brown.... https://tinyurl.com/yd7gyjfw or the Amazing Doughnut Chuck visit https://tinyurl.com/ycdx6nwh

 

Thread Chasing Magic Sam Angelo wyomingwoodturner
By: WYOMINGWOODTURNER
December 15, 2017 · 4,574 views

Sam challenges himself with a little tread chasing 'trickery.' He chases the female threads on one end of a blank and the male threads on the other end.....THEN he cuts the bank in half... Stay tuned to see if they mate together. for more of my work, visit- www.samangelo.com and www.wyomingwoodturner.com

 

A simple Thread Chasing Exercise with Eva & Sofia--wyomingwoodturner
By: WYOMINGWOODTURNER
July 30, 2017 · 3,351 views

With the help of two grand daughters, Sam Demonstrates a simple approach for chasing a successful thread with hand tools. Practicing this simple exercise can build more advanced skills for those wishing to chase threads by hand. I now offer Ron Brown's Amazing Doughnut Chuck If you are interested check it out here. http://samangelo.com/index.php?route product/category&path 63 or watch my review on the Doughnut chuck https://www.youtube.com/watch?v sCMrGL-5jPI&t 183s

 

June Demo with Tom Ferrell
By: Southplains Woodturners
June 26, 2017 · 89 views

Tom Ferrell show how to thread a box.

 

Threading Jig for Woodturners - Make or Buy?
By: Mike Peace Woodturning
June 02, 2017 · 9,790 views

I explain the pros and cons of making vs buying a threading jig with lots of examples. You can download an article I wrote for the April 2013 issue of American Woodturner on making a threading jig and additional material here: http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html Threading Jig Vendors: http://hopewoodturning.co.uk http://www.chefwarekits.com/ http://bestwoodtools.stores.yahoo.net

 

Threaded Glue Block Made with the Guidance of the Lathe
By: Daniel Vilarino
May 28, 2017 · 1,408 views

Hola/Hi! Este video está en Inglés, para verlo en Español, por favor haz un click aquí: https://youtu.be/rue8mpROrlY ***This video is in English*** Canal de Yuval Lahav ***Yuval Lahav's Channel*** https://www.youtube.com/channel/UC8nJRxAzSqB_j7VYpo0yiBg Canal de Mike Waldt ***Mike Waldt's Channel*** https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w Enlace al video de Jim Overton ***Jim Overton's video link*** https://www.youtube.com/watch?v 9oSzFYKEfEI En este video hago uso del taco de sacrificio con rosca que había preparado en el video anterior, usando herramientas básicas, y es

 

Wood Turning - Cutting Threads in Wood, part 2
By: Jason Van Duyn
March 03, 2017 · 202 views

Van Duyn Woodwork, Raleigh NC Call 919.760.0327 to talk about my Sculpture and Urns for Sale or at www.vanduynwoodwork.com. This is video part 2, where I show how I cut the threads for my threaded inserts that I use in my urns. Refer to other video @ https://www.youtube.com/watch?v B62D9wi81bU.

 

Transmision en Vivo desde mi taller, Haciendo Roscas a mano
By: KEA Woodturning Studio Hawaii
February 07, 2017 · 151 views

Caja de quebracho con roscas, con herramientas de 16TPI

 

The Hope Easy Set Threading Jig Tutorial - Plus some handy tips.
By: Mike Waldt
December 20, 2016 · 11,475 views

I had the pleasure of filming a tutorial with Simon Hope on his Easy Set Threading Jig. This video is aimed at people who are looking to get a jig like this, or indeed those who already have one. It is a great visual manual on how to obtain the very best from the jig. Simon Hopes website: www.hopewoodturning.co.uk

 

Useful Tips on The Hope Easy Set Threading Jig
By: Simon Hope
December 20, 2016 · 2,042 views

 

Hope Easy Set Threading Jig
By: Simon Hope
December 20, 2016 · 7,692 views

 

Pro Tips: Threading Wood and Acrylics
By: Craft Supplies USA
December 16, 2016 · 17,181 views

Learn how to drill and tap your wood and acrylic pen and project blanks. Visit us: https://www.woodturnerscatalog.com?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Pro Tips Series Video! Many of the project kits we sell feature threaded hardware, which allows you quickly remove the blank before washing. In this video we’ll show you how easy it is to tap thread woods and acrylics. Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodturning tools and supplies in the indust

 

Pete Wade Thread Chasing
By: Northcoast Woodturners
April 11, 2016 · 861 views

Pete Wade demonstrates 2 ways to chase threads to the Northcoast Woodturners at the April 2016 meeting.

 

EZ QT Threading Attachment for woodturning
By: Mike Peace Woodturning
February 24, 2016 · 3,929 views

I demonstrate EZ Quick Twist Threading attachment for a threading jig that cuts quick twist wood threads on a lathe. To be precise, threads with a double start and interrupted threads. What? Double start thread means that two threads start 180 degrees apart and run the length of the thread entwined with each other. The interrupted threads means the threads come together and lock with less than a quarter turn twist, similar to your typical peanut butter jar. You have got to see this! For more information on this jig and other products go to http://www.chefwarekits.com/ Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support!

 

Thread Chasers Handles & more
By: Peter Woodbine
February 07, 2016 · 1,170 views

Turning handles for my new Thread Chaser Set plus making rebating tool and support rest from my Dad's old tools. Music by courtesy of Teknoaxe - http://www.youtube.com/user/teknoaxe

 

Threading Jig for Wood Threads - new model
By: Mike Peace Woodturning
November 04, 2015 · 6,554 views

In this video I introduce you to the new EZ Threading Jig Pro XL that is used for cutting threads in wood using a wood lathe. I point out the improvements in the new made in the USA model over the earlier version made in the UK. You may be interested in the video I made a few months back where I demonstrate how to use an EZ Threading Jig Pro to make consistent threads in an acorn box. At the end of that video I showed a variety of threaded projects from different woodturners. You can view that video by clicking the link shown here: https://youtu.be/1BEVkDnkZ0I Want to support my channel? Ch

 

Wood Turning - Cutting Threads in Wood, part 1
By: Jason Van Duyn
July 22, 2015 · 829 views

Van Duyn Woodwork, Raleigh NC Call 919.760.0327 to talk about my Sculpture and Urns for Sale or at www.vanduynwoodwork.com. This is video part 1, where I show how I cut the threads for my threaded inserts that I use in my urns. Refer to other video @ https://www.youtube.com/watch?v B62D9wi81bU.

 

EZ Threading Jig Pro Review
By: The Woodshop
June 28, 2015 · 11,920 views

This is the new EZ threading jig pro from Chefwarekits I upload a new project video every Friday. Thank you for supporting free woodworking videos. Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits https://www.chefwarekits.com/?trackin... Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/1131999045658... Facebook https://www.facebook.com/pages/The-Wo... Welcome to my channel, I started woodworking with my grandfather as a young boy. I continued woodworking through high school, and started woodturning after seeing a turned project in a friends shop. Shortly after YouTube started, I was looking for a howto video for duck calls, with no results I decided to make my own video. Some of my fondest memories are working with my grandfather in his wood shop. Being able to share our passion for woodworking, ties it all together.

 

SPSW 031 Skew Use and Threaded Boxes John Swanson
By: SPSW Video Library
June 20, 2015 · 82 views

John Swanson demonstrates the use of the skew and turning threaded boxes

 

Threading Jig for Wood Threads
By: Mike Peace Woodturning
May 23, 2015 · 229,586 views

I demonstrate how to use an EZ Threading Pro Jig to make consistent threads in a woodturned acorn box. At the end of the video I show a variety of of threaded projects from different woodturners. Click here https://youtu.be/8_lJdiSD15Q for a review of a newer and better version of this jig. Check out my my website MikePeaceWoodturning.blogspot.com for a downloadable copy of my article Adding Pizzazz with a Threading Jig published in More Woodturning, Dec 2014.

 

Enroscado, Thread Chasing, 2 of 2
By: Daniel Vilarino
March 22, 2015 · 10,059 views

Hola!/***Hi!*** Este es el segundo de dos episodios en los cuales construyo una cajita de arce con aplique de padouk y con tapa enroscada. ***This is the first of two episodes in which I make a small threaded box in maple with a padouk decoration.*** Solo había intentado hacer rosca en madera usando estos raspadores especiales en otra ocasión y no cuento con la madera adecuada para hacer el proceso, que tiene que ser una madera dura pero al mismo tiempo compacta y de grano uniforme, así que por favor disculpen si el resultado no es excelente. ***I only attempted to do wood threading with the

 

Enroscado, Thread Chasing, 1 of 2
By: Daniel Vilarino
March 20, 2015 · 15,805 views

Hola!/***Hi!*** Este es el primero de dos episodios en los cuales construyo una cajita de arce con aplique de padouk y con tapa enroscada. ***This is the first of two episodes in which I make a small threaded box in maple with a padouk decoration.*** Solo había intentado hacer rosca en madera usando estos raspadores especiales en otra ocasión y no cuento con la madera adecuada para hacer el proceso, que tiene que ser una madera dura pero al mismo tiempo compacta y de grano uniforme, así que por favor disculpen si el resultado no es excelente. ***I only attempted to do wood threading with the

 

58 - Machine-cut and Hand-chasing Threading - Roland Hege - 4 Mar 2014
By: Waxhaw Woodturners
January 10, 2015 · 1,229 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video recorded and edited by Daniel Brinneman. Five hours editing. http://www.lionsdendesigns.com Video by Daniel Brinneman. https://danielbrinneman.com

 

Turning a 'Pill Box' with hand chased threads
By: The Walnut Log Studio
January 07, 2015 · 806 views

Today I turned an acrylic 'pill' shaped pill box. It was threaded by hand and in this video I show how the chasing process works. Part 2 will show the finishing of the box so make sure you come back soon!! Please Like and Share my video and Subscribe to my channel for more woodturning. Visit my store: http://www.thewalnutlog.com Intro Music: 'Reel World (Better Bass Remix)' Written and performed by Alvin Zamudio 2012 Alvin Zamudio/Enigmatic music

 

Hand Thread Chasing with Allan Batty - Full Length Video
By: Craft Supplies USA
December 22, 2014 · 114,167 views

Allan Batty shows you everything you need to know about hand thread chasing wood. Visit us: https://www.woodturnerscatalog.com?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Thread chasing made simple in this how-to style video, using four cameras for visual understanding. Allan Batty's 'Hand Thread Chasing' has brilliant images of thread chasing in action created using four cameras positioned to allow close and continuous action in real time. Allan's exceptional teaching ability means that even the novice woodturner can follow the process with ease, and for the more experienced turner, it is an opportunity to study the very best techniques of an acknowledged expert. 60 min. Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodturning tools and supplies in the industry. Visit us at https://www.woodturnerscatalog.com, 1-800-551-8876

 

Thread cutting techniques
By: Robert Sorby
November 12, 2014 · 32,502 views

 

Fundamentals of Hand Chased Threads by Sam Angelo
By: WYOMINGWOODTURNER
September 19, 2014 · 5,285 views

Sam covers the tools used in thread chasing and demonstrates chasing female and male threads as well as mating the two. He makes the case for understanding the English tradition of chasing threads by hand.

 

2013-01-10 - Adding Pizzazz with Threads by Mike Peace
By: Gwinnett Woodworkers
August 24, 2014 · 6,681 views

http://www.gwinnettwoodworkers.com Adding Pizzazz with Threads 01-10-2013 Class Description - Mike Peace demonstrate the ABC’s of traditional hand thread chasing techniques and contrasts that with using a threading jig. Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Wood Turning #75 Thread Spool Holder
By: The Tiny Trailer Workshop
May 31, 2014 · 797 views

This is a project to fit a need on a knitting machine table. In order to make the base as sturdy as possible I left it quite thick and as a result it split as it dried ... Even though I dried it as slowly as I thought I was supposed to... and yet I wonder if there were steps that I could have taken differently... I will only know for sure after the next time ... and only if I remembered what happened this time... next time! The cracking didn't hurt the piece at all as I think it looks like a bolt of black lightning running down the side... The spool I had thought thin enough that it wouldn't

 

Wood Turning #75 Texted Thread Spool Holder
By: The Tiny Trailer Workshop
May 31, 2014 · 748 views

This is a project to fit a need on a knitting machine table. In order to make the base as sturdy as possible I left it quite thick and as a result it split as it dried ... Even though I dried it as slowly as I thought I was supposed to... and yet I wonder if there were steps that I could have taken differently... I will only know for sure after the next time ... and only if I remembered what happened this time... next time! The cracking didn't hurt the piece at all as I think it looks like a bolt of black lightning running down the side... The spool I had thought thin enough that it wouldn't

 

#77 Roscas de madera - Wooden threads
By: Miguel Sanchez
February 17, 2014 · 135,721 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Threading a Finial insert: Woodturning
By: WYOMINGWOODTURNER
February 01, 2014 · 16,054 views

Sam shows another process for attaching a finial to a hollow form. This video contains some great shots of Sam Angelo chasing threads.

 

Teaching aids for Thread Chasing: woodturning
By: WYOMINGWOODTURNER
November 03, 2013 · 8,926 views

Sam shows off some teaching aids he uses for teaching thread chasing. He develops or invents a visual aid or technique for teaching a particular aspect of chasing threads by hand.

 

Threaded Box: A step-by-step process/woodturning
By: WYOMINGWOODTURNER
November 02, 2013 · 15,432 views

Sam takes you through the process of making a threaded, lidded box. This step-by-step process will show in some detail how to turn a box, with threads, from start to finish.

 

THREAD CHASING, PRACTICE MATERIALS
By: WYOMINGWOODTURNER
October 04, 2013 · 3,025 views

Sam looks at some man-made materials used for practicing thread chasing with hand tools. This video shows some nice close up action of thread chasing.

 

Thread Chasing Jig for making male and female threads
By: Carl Jacobson
June 13, 2013 · 167,451 views

Thread chasing adds nice detail to a turned piece. This jig does both inside and outside threads. It only takes a few minutes to set up on the lathe. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robust dealer if you have any

 

# 171 Thread chasing
By: Cap'n Eddie Castelin
May 28, 2013 · 17,637 views

A thread chasing project using the Sorby thread chaser package from Craft Supplies. Want to make your own tools, check the forums for directions. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

Turned Box with Threaded Lid and Finial part 2
By: WYOMINGWOODTURNER
February 28, 2013 · 3,264 views

In part 2 of this project, Sam Angelo finishes threading and turning a blackwood finial with left hand threads. With left hand threads on the finial, he turns it with the lathe spinning in reverse.

 

Turned Box with Threaded Lid and Finial part 1
By: WYOMINGWOODTURNER
February 28, 2013 · 4,536 views

Sam chases threads in the lid and finial of a boxwood 'box.' In part 1 he completes the lid and threads which are right-hand threads. In part 2, he finishes the finial which has left-hand threads.

 

Hand Chased Threads in Puzzles and Boxes
By: WYOMINGWOODTURNER
February 12, 2013 · 6,992 views

SAM displays his threaded puzzles and boxes along with a mallet or gavel inspired by the late Bill Jones. Reference is made to the book 'All Screwed Up' written by John Berkeley of the OK. It is full of puzzles and instruction on chasing threads by hand.

 

5 - Hand Chasing & Machine Threading - Roland Hege - 6May2008
By: Waxhaw Woodturners
February 07, 2013 · 1,622 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Video by Rich Hansen. Video by Daniel Brinneman. https://danielbrinneman.com

 

Thread Chasing LEFT HAND Threads in wood
By: WYOMINGWOODTURNER
February 06, 2013 · 2,120 views

Sam Takes on the challenge of chasing left hand threads. He uncovers the secret that left or right hand thread chasing is easy and anyone can do it.

 

Thread Chasing: Male Threads for a Finial Base
By: WYOMINGWOODTURNER
February 01, 2013 · 2,023 views

Part II: Sam chases the male threads in his Masur Birch Porject.

 

THREADED BOXWOOD (female) INSERT
By: WYOMINGWOODTURNER
February 01, 2013 · 2,669 views

PART I: Sam demonstrates how to chase threads into a boxwood insert for a burial urn or hollow form. He shows the step-bystep process for turning and fitting the insert into the recess in the opening of the piece.

 

Threaded Finial and Nut: Part 2 (woodturning)
By: WYOMINGWOODTURNER
December 09, 2012 · 2,705 views

In this 2-part series, Sam threads, with traditional thread chasers, the base of a finial. In part 2 he uses a machinist's tap to develop female threads for a 'nut' that will lock in the finial. Don't forget to see part 1. Thanks

 

Threaded Finial and Nut: Part 1 (woodturning)
By: WYOMINGWOODTURNER
December 08, 2012 · 3,906 views

In this 2-part series, Sam threads, with traditional thread chasers, the base of a finial. In part 2 he uses a machinist's tap to develop female threads for a 'nut' that will lock in the finial. Don't forget to see part 2. Thanks

 

NEFWA February 2012 Threaded Pewter Finial 3 of 3
By: North East Florida Woodturners Association
September 08, 2012 · 468 views

Threaded Pewter Finial Part 3 of 3 Demonstration of casting, turning, threading and attaching a pewter finial to a hollow form by Keith Larrett at the March 2012 meeting of the Northeast Florida Woodturners Association.

 

NEFWA February 2012 Threaded Pewter Finial 2 of 3
By: North East Florida Woodturners Association
September 08, 2012 · 375 views

Threaded Pewter Finial Part 2 of 3 Demonstration of casting, turning, threading and attaching a pewter finial to a hollow form by Keith Larrett at the March 2012 meeting of the Northeast Florida Woodturners Association.

 

NEFWA February 2012 Threaded Pewter Finial 1 of 3
By: North East Florida Woodturners Association
September 08, 2012 · 590 views

Threaded Pewter Finial Part 1 of 3 Demonstration of casting, turning, threading and attaching a pewter finial to a hollow form by Keith Larrett at the March 2012 meeting of the Northeast Florida Woodturners Association.

 

THREADED INSERTS FOR HAND CHASED THREADS
By: WYOMINGWOODTURNER
September 04, 2012 · 6,364 views

Sam covers the steps for turning and threading male and female inserts for a hollow form.

 

SPINNING TOP with hand chased threads
By: WYOMINGWOODTURNER
August 21, 2012 · 2,074 views

Sam takes the 'spinning top surprise' concept to a new level.

 

NEFWA February 2012 Threaded Pewter Collar 3 of 3
By: North East Florida Woodturners Association
August 12, 2012 · 501 views

Threaded Pewter Collar Part 3 of 3 Demonstration of casting, turning, threading and texturing a pewter collar in a hollow form by Keith Larrett at the February 2012 meeting of the Northeast Florida Woodturners Association.

 

NEFWA February 2012 Threaded Pewter Collar 2 of 3
By: North East Florida Woodturners Association
August 12, 2012 · 954 views

Threaded Pewter Collar Part 2 of 3 Demonstration of casting, turning, threading and texturing a pewter collar in a hollow form by Keith Larrett at the February 2012 meeting of the Northeast Florida Woodturners Association.

 

NEFWA February 2012 Threaded Pewter Collar 1 of 3
By: North East Florida Woodturners Association
August 12, 2012 · 774 views

Threaded Pewter Collar Part 1 of 3 Demonstration of casting, turning, threading and texturing a pewter collar in a hollow form by Keith Larrett at the February 2012 meeting of the Northeast Florida Woodturners Association.

 

THREAD CHASING MALE THREADS-UPDATE
By: WYOMINGWOODTURNER
February 11, 2012 · 4,370 views

This is a demonstration showing hand chased male threads in wood. This is Part II of a two part series on thread chasing.

 

THREAD CHASING MALE THREADS on the LATHE-UPDATE
By: WYOMINGWOODTURNER
February 11, 2012 · 7,592 views

Part 2 of chasing female/male threads. This video focuses on chasing male threads and mating them to female threads chased in boxwood

 

THREAD CHASING: FEMALE THREADS-UPDATED
By: WYOMINGWOODTURNER
February 10, 2012 · 9,873 views

This is a demonstration showing hand chased female threads in wood. This is Part I of a two part series on thread chasing.

 

THREAD CHASING IN WOOD: TOOLS OF THE TRADE
By: WYOMINGWOODTURNER
February 06, 2012 · 25,026 views

This video contains a presentation and demonstration of tools used when chasing wood threads by hand.

 

THREAD CHASING in WOOD: TOOLS and SHARPENING
By: WYOMINGWOODTURNER
February 06, 2012 · 3,334 views

Thread chasing tools are sharpened. Tools of the turning trade are described and sharpened.

 

Thread Chasing and the Point Tool
By: WYOMINGWOODTURNER
February 01, 2012 · 10,241 views

The Point tool is historically used for various operations in conjunction with hand chasing threads. This small tool can be used in place of a parting tool, a spindle gouge, or a skew chisel. It is used when chasing threads in wood and makes it unnecessary to pick up a 2nd or 3d tool while this handy little tool will do the job.

 

THREAD CHASING in WOOD, BOOKS and RESOURCES
By: WYOMINGWOODTURNER
January 06, 2012 · 2,060 views

Books, videos, Wood and materials for hand chasing threads

 

THREAD CHASING in wood: TOOLS AND SHARPENING
By: WYOMINGWOODTURNER
January 06, 2012 · 3,683 views

Show tools used for chasing wooden threads by hand and sharpening

 

THREAD CHASING PROJECTS: YOU CAN MAKE BY HAND CHASING THREADS IN WOOD
By: WYOMINGWOODTURNER
January 05, 2012 · 6,957 views

THIS UPLOAD GOES BEYOND HAND CHASING THREADS IN WOOD AND DEMONSTRATES HOW TO INCORPORATE THREADS INTO SMALL PROJECTS LIKE A MUSHROOM OR A BURIAL URN. SAM ANGELO WYOMINGWOODTURNER.COM

 

THREAD CHASING: MATING FEMALE AND MALE THREADS WMV.wmv
By: WYOMINGWOODTURNER
March 01, 2011 · 21,109 views

This is the third part of a series on chasing wooden threads by hands. Parts 1 and 2 covered male and female threads. Chasing threads using a boxwood insert allows the use of softer woods in your finished project .

 

THREAD CHASING: HAND CUT FEMALE THREADS IN WOOD PART 2
By: WYOMINGWOODTURNER
January 12, 2011 · 67,578 views

HAND CHASING FEMALE THREADS FOR A HOLLOW FORM. FORMING A BOXWOOD INSERT THAT WILL BE GLUED INTO A SOFTER WOOD.

 

THREAD CHASING : HAND CHASED MALE THREADS IN WOOD PART 1
By: WYOMINGWOODTURNER
January 11, 2011 · 13,578 views

THREAD CHASING, THREAD CHASING MALE THREADS IN BOXWOOD, a DEMONSTRATION

 

Woodturning Taxus.Decorative threading.Roscado decorativo.
By: TaxusWoodturning
January 04, 2010 · 13,082 views

Roscado decorativo exterior de una pieza de ébano.

 

Return to Turning Videos

Powered by Google

Great Bargains on Sale until July 5, 2018


Starter Pen Turning Kit

On Sale starting at $59.99 each

Save $10.00


List price normally starts at $69.99

All the essentials you need for pen turning, including 3 blanks, 3 hardware kits and a Pen Mill Kit with four pilot shaft sizes.

Click here for more information or to purchase


Pen-Turning Ergonomic Carbide Turning Tools, 3-Piece Set

On Sale for only $109.99 each

Save $30.00


List price: $139.99

Compact, comfortable rubber handles provide excellent control and reduce fatigue—replaceable carbide tips need no sharpening.

Click here for more information or to purchase


Customized Electric Branding Iron Gift Set

On Sale for only $99.99 each

Save $20.00 each


List price: $119.99

Personalized branding iron gift set lets your favorite woodworker customize their own design and message.

Click here for more information or to purchase


Excelsior Mini Lathe

On Sale for only $199.99 each

Save $100.00


List price: $299.99

With solid cast-iron construction, a robust 1/2 hp motor and a precision-machined live center, this little workhorse rivals features found in much larger lathes.

Click here for more information or to purchase


Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Backgate
Sheffield Woodturning
Rubber Chucky Products

(Click any Ad to go to our Sponsor's Website)