Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Tips Videos (426)

Sort by

Or click here to: Search All Videos


September Notes from the Turning Shop with Sam Angelo
By: WYOMINGWOODTURNER
September 26, 2019 · 2,607 views

Sam brings you up to date on what is happening from his woodturning shop in Billings, Montana. He will answer some viewer questions and make a few comments of his own. He gives you a quick visual tour of the outside of his shop and home. I am now an authorized Robust lathe dealer. Please contact me if you have any questions Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com

 

Tips and tricks for the pen turner
By: Lassen Lathe Works
September 24, 2019 · 110 views

 

Wood Turning Tips - Bench Grinder Dust Collection
By: SP Wood Art
September 20, 2019 · 495 views

One of my dedicated wood turning tips and tricks videos which focuses on bench grinder dust collection then sharpening lathe tools. Hope you enjoy these short tip videos. SPONSORS: TOTALBOAT If you are interested in our sponsor’s product(s), please feel free to visit their site linked below. I highly recommend their products and customer service. If you need assistance with a project or technical advice, give them a call at (401) 396-8199. Totalboat - http://www.totalboat.com Totalboat - High Performance 2:1 Kit http://www.totalboat.com/product/high-performance-21-epoxy-kits/ STARBOND If yo

 

Turning Point: How Dry I Am
By: RickTurns
September 12, 2019 · 3,753 views

How do you decide when a bowl blank is dry enough to finish turning it? My bowl blanks won't answer when I ask them that question - so I employ other methods. My drying box video: https://bit.ly/2kylNDt The music during the close of the video, 'Happy Little Elves' by Audionautix, is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ How do you decide when a bowl blank is dry enough to finish turning?

 

Moment of Peace #18 with Mike Peace
By: Mike Peace Woodturning
September 10, 2019 · 2,254 views

I share some viewers comments on my recent carbide tool videos as well as some other video comments. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com

 

Turning Tip #2 Sanding Options with Sam Angelo
By: WYOMINGWOODTURNER
August 30, 2019 · 2,380 views

In this, TIP #2---Sam shows several methods for sanding on and off the wood lathe. He especially focuses on an 'off-center' teardrop form he recently turned. He used sanding pads in a drill, the spindle on his lathe, as well as his drill press. Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: samandcheryle@gmail.com

 

Quick Tip
By: Erik Anderson
August 18, 2019 · 1,709 views

Just a tip

 

Turning Tip #1 'Marking a Tenon' with Sam Angelo
By: WYOMINGWOODTURNER
August 17, 2019 · 3,907 views

Sam begins a new video series with short, informative turning tips as the focus. In this......THE FIRST turning tip video, Sam will show an easy-safe procedure for marking a tenon on the end of a blank. Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com

 

Quick Tip - Making a Drawing Bow
By: Gord Rock
August 12, 2019 · 1,058 views

A drawing bow can be a great help to woodworkers and is easy to make. This is my method.

 

Notes from the Wyomingwoodturner AUGUST 2019
By: WYOMINGWOODTURNER
August 12, 2019 · 3,434 views

The last notes from the Wyomingwoodturner.......This episode of Sam's long running series that began in his workshop in Wyoming will be his last using that title. But Sam will continue responding to comments and answering questions but under a new title. (Not sure what that will be). Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com

 

Woodturning - 50 tips and tricks
By: The Welsh Woodman
August 09, 2019 · 897 views

50 tips and tricks to help you with your woodturning, let me know in the comments below which is your favourite tip. Feel free to add any other tips to help out other woodturners out there. If you have found this video useful please support me by subscribing to my channel.

 

Talking turning and RPT
By: Blind Woodturner
August 01, 2019 · 155 views

*** Join me, Chris Fisher, the Blind Wood Turner, in my workshop. I started out in life as a regular guy, working in auto body repair at BMW, until one day, completely out of the blue, a rare virus (Toxoplasmosis) reared its ugly head and caused me to lose my sight in a matter of weeks. Despite the challenges of coming to terms with losing my sight, I refused to give up and, after four years I decided to take up woodturning so that I could make myself a vampire stake – I’m a huge horror film fan! While every day is still a challenge, these challenges are what fuel my mission – to e

 

Moment of Peace - (Mike Peace Woodturning)
By: Mike Peace Woodturning
July 09, 2019 · 2,012 views

I respond to viewer comments and talk about what is happening with my woodturning. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com

 

Notes from the Wyomingwoodturner July 2019
By: WYOMINGWOODTURNER
July 08, 2019 · 3,595 views

In this installment of 'Notes' Sam answers a few questions and explains a little more why he made the move to Billings, Montana. And you will see that his temporary shop is a work in progress. Natural Edge Box elder burl bowl video (Mentioned in video) https://tinyurl.com/y3dfxgqg

 

Fitness, Wellness and Woodturning
By: Mike Peace Woodturning
July 02, 2019 · 1,292 views

Fitness and wellness affect our woodturning. Staying fit can keep you turning as long as possible. If you are older, consider an exercise program like the Silver Sneakers program I participate in. Check here to see if your medicare advantage plan provides access to the Silver Sneakers Program. https://tools.silversneakers.com Biomechanics is also important for woodturning and you might want to check out Eric Loftstrom's video https://www.youtube.com/watch?v 7qgIVpRJr4w&t 76s. As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3/.

 

Confused by Your Woodturning Chuck Manual?
By: Mike Peace Woodturning
June 28, 2019 · 1,760 views

Your scroll chuck manual can be confusing, conflicting and contradictory on how to best use your chuck and different jaws safely. I provide some interesting real life examples. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3/.

 

Woodturning Tenon or Recess Sizing Gage
By: Mike Peace Woodturning
June 25, 2019 · 2,779 views

I demonstrate how to make and use a woodturning Tenon or Recess Gage. This easy to make template will help you to quickly check a tenon or recess to make sure it is correctly sized for your scroll chuck jaws. As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3/.

 

Notes from the Wyomingwoodturner June 2019 Sam Angelo
By: WYOMINGWOODTURNER
June 17, 2019 · 3,433 views

Sam completes his last 'Notes from the Wyomingwoodturner' from his empty shop in Worland, Wyoming. He ventures into the future with plans for a new shop in Billings, Montana. 'It is my intention to remain the 'Wyomingwoodturner' and to produce woodturning videos-no matter where I live.' Sam Angelo Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom (The following links to topics or videos were mentioned in this video). Layered Container with Sam Angelo Wyomingwoodturner Video Link: https://www.youtube.com/watch?v 5Ei46XhbKsQ&t 289s Layered Bowl by Sam Angelo Wyomingwoodturner Video link: https://www.youtube.com/watch?v Nq2kuorbNX0 Router Table by Sam Angelo Wyomingwoodturner May 2019 Video Link https://www.youtube.com/watch?v 8jEaEISLKw0&t 280s @ WOODHAVEN: ROUTER TABLE PLATES & ACCESSORIES Wood Haven Link https://www.woodhaven.com/collections/router-plates-accessories

 

New Glitter Blocks, New Item Reviews, Dying Curly Wood - Shopisode 17
By: Casey Martin
June 07, 2019 · 2,198 views

Let me know what you think! 'Wood Work Harder' Merch: https://bit.ly/2MC8nmU Mitre gauge with fence: https://www.banggood.com/custlink/3KDGFiVJC5 Digital Temp Thermometer: https://www.banggood.com/custlink/DmGvHZtCca Alforca Safety Shoes: https://www.alforca.com/ https://www.facebook.com/theAlforca

 

Quick Tip #17 - Staying true between centers
By: Billy Burt
June 04, 2019 · 178 views

In this Quick Tip I share my method for finishing a pair of rollers between centers after the intial turning. If you have questions, ask away and I'll do my best to answer them. https://acdcreations.com/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ #betweencenters #turningtrue #turningbetweencenters

 

371 spinning end
By: Eddie Castelin
May 21, 2019 · 2,291 views

This video is about 371 spinning end

 

# 370 stuff
By: Eddie Castelin
May 20, 2019 · 2,018 views

This video is about 370 stuff

 

May 2019 Notes from the Wyomingwoodturner
By: WYOMINGWOODTURNER
May 17, 2019 · 3,055 views

Once again Sam reviews some comments and answers questions on his recently published videos. He also announces that his house is 'under contact' and will close in June. Sam and Cheryle will be moving to Billings, Montana With as little interruption as possible-videos WILL continue. Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom Video on Layered Container: https://www.youtube.com/watch?v 5Ei46XhbKsQ Tool Handle for Box Scraper https://www.youtube.com/watch?v 70zpTB63IuE

 

Tuesday Tip 42, Aid for depth of hollowing in a hollow form
By: Lyle Jamieson
May 14, 2019 · 954 views

Please welcome a new sponsor Starbond to my YouTube family. I have been using Starbond CA glues for decades. Check them out at https://www.starbond.com Use promo code: LYLE15 at checkout for 15% off discount. Please see my website http://www.lylejamieson.com for all the resources and tool store. Every tool listed has more information details. See not only the right tools but tips and techniques on how to use them. I have archived my articles written for publications and each of my newsletter broadcasts have all the Q&As listed by topic and indexed table of contents. Please support my sponsors. They make it possible for me to produce this content. http://www.hunterwoodturningtool.com 612-718-7926 http://www.thompsonlathetools.com 440-241-6360 http://www.starbond.com 800-900-GLUE(4583)

 

Notes from the WYOMINGWOODTURNER APRIL 2019 Sam Angelo
By: WYOMINGWOODTURNER
April 29, 2019 · 3,266 views

Please enjoy the April addition to 'Notes from the wyomingwoodturner' Sam announces that Worland Wyo Woodturner-club member, Jodi Bennett has been selected as a winner in the Master Class category for the Record Power, Pics for Prizes contest. Sam Shows some of his recent work and a new router table he made Thanks for watching Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwoodturnercom David Cross Hold fasts EloraCraftsmanLamp ETSY shop https://tinyurl.com/yyyhuamw 'The Pohl Barn Productions' Flaming Flower Bowl VIDEO https://www.youtube.com/watch?v -6yn9ozKgRo&t 645s

 

Round and Round She Goes!
By: Mike Peace Woodturning
April 16, 2019 · 2,948 views

How I made a rotating display turntable using a cheap eBay microwave turntable motor. Thanks to Mike Waldt for the idea which is based on his video https://www.youtube.com/watch?v mn1kXgaQ-9g I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3/other-woodturning-resources

 

Tuesday Tip 41 Centering ring for alignment of glue block
By: Lyle Jamieson
April 09, 2019 · 1,226 views

Please welcome a new sponsor Starbond to my YouTube family. I have been using Starbond CA glues for decades. Check them out at https://www.starbond.com Use promo code: LYLE15 at checkout for 15% off discount. Please see my website http://www.lylejamieson.com for all the resources and tool store. Every tool listed has more information details. See not only the right tools but tips and techniques on how to use them. I have archived my articles written for publications and each of my newsletter broadcasts have all the Q&As listed by topic and indexed table of contents. Please support my sponsors. They make it possible for me to produce this content. http://www.hunterwoodturningtool.com 612-718-7926 http://www.thompsonlathetools.com 440-241-6360 http://www.starbond.com 800-900-GLUE(4583)

 

Moment of Peace #16
By: Mike Peace Woodturning
April 02, 2019 · 2,217 views

Woodturner Mike Peace share some news and views on what is happening with him and his channel. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3/other-woodturning-resources

 

March 2019 Notes from the WyomingWoodturner Sam Angelo
By: WYOMINGWOODTURNER
March 29, 2019 · 3,271 views

On Sam's return from a trip to the Oregon/Washington coast he reflects on the Oregon Woodturning Symposium and demonstrating at the Cascade Woodturning Club in Portland. Please find my work on the following sites...... wyomingwoodturner http://www.wyomingwoodturner.com Sam’s Artwork at samangelo.com http://www.samangelo.com/1/index.php/home/art-by-sam Ron Brown’s Tools and Accessories http://www.samangelo.com/1/index.php/home/tools-and-supplies ETSY https://www.etsy.com/shop/wyomingwoodturnercom

 

Lets chat and prat about
By: The Flaming Turner
March 17, 2019 · 60 views

 

Talking turning and G and T!
By: Blind Woodturner
March 16, 2019 · 432 views

***Thanks for hanging out with myself ,Nicola and Bamber .Find out what we've been up to lately !! Join me, Chris Fisher, the Blind Wood Turner, in my workshop. I started out in life as a regular guy, working in auto body repair at BMW, until one day, completely out of the blue, a rare virus (Toxoplasmosis) reared its ugly head and caused me to lose my sight in a matter of weeks. Despite the challenges of coming to terms with losing my sight, I refused to give up and, after four years I decided to take up woodturning so that I could make myself a vampire stake – I’m a huge horror film fan!

 

Help and advice
By: Blind Woodturner
March 13, 2019 · 1,107 views

***Hi Everyone !! I wear my heart on my sleeve in this one .......Thank you all so very much !! Join me, Chris Fisher, the Blind Wood Turner, in my workshop. I started out in life as a regular guy, working in auto body repair at BMW, until one day, completely out of the blue, a rare virus (Toxoplasmosis) reared its ugly head and caused me to lose my sight in a matter of weeks. Despite the challenges of coming to terms with losing my sight, I refused to give up and, after four years I decided to take up woodturning so that I could make myself a vampire stake – I’m a huge horror film fan! Wh

 

Hook Tool Sharpening Tip
By: Tod Raines
February 26, 2019 · 498 views

Produced by Tod Raines of Woodturning Tool Store on February 26, 2019. A short video tip on how to re-shape or sharpen the Hook Tool on a grinder. Visit Woodturning Tool Store https://woodturningtoolstore.com Social media links Facebook: https://www.facebook.com/woodturningtoolstore Google : https://plus.google.com/ TodRaines Instagram: https://www.instagram.com/traines64

 

30 Woodturning Tips, Tricks and Jigs
By: Mike Peace Woodturning
February 26, 2019 · 13,358 views

I demonstrate 30 woodturning tips, tricks and jigs. This is a revised version of a Dec 2014 video that had some camera issues. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://MikePeaceWoodturning.com

 

Turn Talk #7 - Turning Jigs, tricks, tips, etc.
By: Billy Burt
February 24, 2019 · 280 views

I decided to call this particular series Turn Talk. Here I will discuss various turning topics that aren't really quick tips, not shop updates and not turning projects. In this episode I talk about some of the jigs I use for turning. From shop made donut chuck to shop made face plates. If you have questions about anything you've seen me do, ask away. I have pretty thick skin and am not easily offended. I do my best to respond to every comment and question. Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ Segmented Turnings Playlist: https://www.youtube.com/playlist?list PLB333Mb1djGfK-jSEhJ2BofcHFWs1cMDq

 

Turn Talk #6 - Wall Thickness
By: Billy Burt
February 12, 2019 · 152 views

I decided to call this particular series Turn Talk. Here I will discuss various turning topics that aren't really quick tips, not shop updates and not turning projects. In this episode I talk about wall thickness. How thick should you leave the walls... or how thin as the case may be? If you have questions about anything you've seen me do, ask away. I have pretty thick skin and am not easily offended. I do my best to respond to every comment and question. Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug

 

Tuesday Tip, 36 Bandsaw opinion for turning
By: Lyle Jamieson
February 12, 2019 · 822 views

Please welcome a new sponsor Starbond to my YouTube family. I have been using Starbond CA glues for decades. Check them out at https://www.starbond.com Use promo code: LYLE15 at checkout for 15% off discount. Please see my website http://www.lylejamieson.com for all the resources and tool store. Every tool listed has more information details. See not only the right tools but tips and techniques on how to use them. I have archived my articles written for publications and each of my newsletter broadcasts have all the Q&As listed by topic and indexed table of contents. Please support my sponsors. They make it possible for me to produce this content. http://www.hunterwoodturningtool.com 612-718-7926 http://www.thompsonlathetools.com 440-241-6360 http://www.starbond.com 800-900-GLUE(4583)

 

Shop Tips
By: Lee Burkholder
February 09, 2019 · 165 views

Cumberland Valley Wood Turners, shop tips, wood working tips, lathe, wood shop tips, easy to follow wood shop tips

 

Tool Review, Jumbo bar
By: Lyle Jamieson
February 09, 2019 · 707 views

Please welcome a new sponsor Starbond to my YouTube family. I have been using Starbond CA glues for decades. Check them out at https://www.starbond.com Use promo code: LYLE15 at checkout for 15% off discount. Please see my website http://www.lylejamieson.com for all the resources and tool store. Every tool listed has more information details. See not only the right tools but tips and techniques on how to use them. I have archived my articles written for publications and each of my newsletter broadcasts have all the Q&As listed by topic and indexed table of contents. Please support my sponsors. They make it possible for me to produce this content. http://www.hunterwoodturningtool.com 612-718-7926 http://www.thompsonlathetools.com 440-241-6360 http://www.starbond.com 800-900-GLUE(4583)

 

Notes from the Wyomingwoodturner February 2019 Sam Angelo
By: WYOMINGWOODTURNER
February 07, 2019 · 3,165 views

Sam answers questions from viewers about sharpening tools, the best way to prepare a pen blank, and safely drilling with a Jacobs chuck. He also covers some videos he will publish in the near future. And finally he comments briefly on feedback he received regarding the Record Power contest. Sam mentions a new abrasive paste and polishing paste he will use in an upcoming video. Check out ACK'S WOODTURNERS PASTES https://ackswoodpaste.com made by Tom Ackley Verday Paint-Tensecondstudio retiring: Inventory close-out http://store.tensecondsstudio.com/vdsecmain.html Notice the workbench? Sam will put up 6 process videos soon showing construction of the top, dovetailing the corners, making the shoulder vice and finally gluing up the base.

 

More Woodturning Tips
By: Mike Peace Woodturning
February 05, 2019 · 3,059 views

In this Tip of the Week woodturning tip I talk about carving gloves, a new winter long sleeve smock (US ACU Jacket) and using remounting jaws inside a bowl for reverse chucking a bowl. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. Link to Cut Protection Gloves https://amzn.to/30hwI2W Link to Record Power Mega Reversing Jaws https://amzn.to/34NnX4r You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3/other-woodturning-resources

 

Tuesday Tip 35 Use two live centers to start in the balance point
By: Lyle Jamieson
February 05, 2019 · 1,024 views

Please welcome a new sponsor Starbond to my YouTube family. I have been using Starbond CA glues for decades. Check them out at https://www.starbond.com Use promo code: LYLE15 at checkout for 15% off discount. Please see my website http://www.lylejamieson.com for all the resources and tool store. Every tool listed has more information details. See not only the right tools but tips and techniques on how to use them. I have archived my articles written for publications and each of my newsletter broadcasts have all the Q&As listed by topic and indexed table of contents. Please support my sponsors. They make it possible for me to produce this content. http://www.hunterwoodturningtool.com 612-718-7926 http://www.thompsonlathetools.com 440-241-6360 http://www.starbond.com 800-900-GLUE(4583)

 

More Woodturning Magazine and resources.
By: Lyle Jamieson
February 02, 2019 · 704 views

Please welcome a new sponsor Starbond to my YouTube family. I have been using Starbond CA glues for decades. Check them out at https://www.starbond.com Use promo code: LYLE15 at checkout for 15% off discount. Please see my website http://www.lylejamieson.com for all the resources and tool store. Every tool listed has more information details. See not only the right tools but tips and techniques on how to use them. I have archived my articles written for publications and each of my newsletter broadcasts have all the Q&As listed by topic and indexed table of contents. Please support my sponsors. They make it possible for me to produce this content. http://www.hunterwoodturningtool.com 612-718-7926 http://www.thompsonlathetools.com 440-241-6360 http://www.starbond.com 800-900-GLUE(4583)

 

Another Moment of Peace - Woodturning
By: Mike Peace Woodturning
January 29, 2019 · 3,840 views

I demonstrate a new inertia sander from Woodturners Wonders, talk about what is coming up, give a shout out about Darice foamies and demonstrate cutting an acrylic disc on a lathe. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3/other-woodturning-resources/ You can find the Turbo Wonder Sander here https://woodturnerswonders.com

 

Pen Turning Quick Tip - - Episode 178
By: Paul Lockwood
January 25, 2019 · 678 views

A very short video with a quick tip on scoring the brass tube for pen blanks. A very quick process that takes seconds. Home Made Bowl Sander https://www.youtube.com/watch?v ObStN8R4lyQ You can find me on the below Social Media Instagram: https://www.instagram.com/paul.a.lockwood/ @paul.a.lockwood Twitter: https://twitter.com/paullockwooduk @paullockwooduk Facebook: https://www.facebook.com/PaulLockwood.Woodworking/ Pinterest: https://www.pinterest.co.uk/lockwood3538/ Etsy: https://www.etsy.com/uk/shop/PaulLockwoodUK Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Woodturning - Hex Nut Glue Block Follow Up
By: Mike Waldt
January 23, 2019 · 9,040 views

Simon Hope: http://www.hopewoodturning.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Easy Wood Tools: http://www.easywoodtools.com/ Easy Wood Tools at Amazon UK: https://www.amazon.co.uk/Easy-Wood-Tools-Chuck-M33-3-5/dp/B07664VKFB/ref lp_8318174031_1_13?srs 8318174031&ie UTF8&qid 1529428204&sr 8-13 Makers Central: https://www.makerscentral.co.uk

 

# 337 Saved Trash
By: Eddie Castelin
January 22, 2019 · 3,451 views

A couple of basic tips and hints on tools on flipping an old project from the trash

 

# 335 Corian Tips
By: Eddie Castelin
January 17, 2019 · 2,445 views

A couple of basic tips and hints on tools to work with Corian for turners

 

NOTES from the Wyomingwoodturner January 2019 Sam Angelo
By: WYOMINGWOODTURNER
January 08, 2019 · 3,928 views

With this current 'Notes...' Sam announces his plans to make a 'Woodturner's Workbench' and a corresponding video series. There are links below which have provided inspiration for this venture. Sam also answers other questions and addresses comments from viewers. Happy 2019....and please be safe. Lake Erie Toolworks: work bench accessories and videos https://www.lakeerietoolworks.com Domidrewno videos The workbench using Lake Erie Toolworks wooden screws: https://www.lakeerietoolworks.com/pages/woodworker-info Please find my work on the following sites wyomingwoodturner http://www.wyomingwoodturner.com Sam’s Artwork at samangelo.com http://www.samangelo.com/1/index.php/home/art-by-sam Ron Brown’s Tools and Accessories http://www.samangelo.com/1/index.php/home/tools-and-supplies ETSY https://www.etsy.com/shop/wyomingwoodturnercom How to search a Youtube channel by Sam: https://www.youtube.com/watch?v G12tDGhj_rI&t 142s

 

# 334 Balls Alive!
By: Eddie Castelin
January 05, 2019 · 2,860 views

A couple of basic tips and hints on tools on finishing wooden balls you created. This is number 334, I just screwed up the number program.

 

Morse Taper Basics for Woodturners
By: Mike Peace Woodturning
January 04, 2019 · 5,029 views

All modern lathes use a machine taper called a morse taper on both headstock spindle and Tailstock quill. These are precisely machined to securely hold drive centers, live centers, drill chucks, collets and more chucking accessories. Mike explains the basics of Morse tapers including how to use a reamer to repair minor damage. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3/other-woodturning-resources

 

Do you Clean Your Morse Taper?
By: Mike Peace Woodturning
January 01, 2019 · 4,222 views

When dust, oil, wax or other materials build up inside of the morse taper in your lathe spindle, centers and drill chucks are unable to seat properly, which is likely to cause permanent damage to your expensive lathe spindle rendering it incapable of holding morse taper centers. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3/other-woodturning-resources

 

Tuesday tip 34, Jamieson resources
By: Lyle Jamieson
December 18, 2018 · 678 views

Please welcome a new sponsor Starbond to my YouTube family. I have been using Starbond CA glues for decades. Check them out at https://www.starbond.com Use promo code: LYLE15 at checkout for 15% off discount. Please see my website http://www.lylejamieson.com for all the resources and tool store. Every tool listed has more information details. See not only the right tools but tips and techniques on how to use them. I have archived my articles written for publications and each of my newsletter broadcasts have all the Q&As listed by topic and indexed table of contents. Please support my sponsors. They make it possible for me to produce this content. http://www.hunterwoodturningtool.com 612-718-7926 http://www.thompsonlathetools.com 440-241-6360 http://www.starbond.com 800-900-GLUE(4583)

 

finding the centre
By: Nicholas Burt woodturning
December 14, 2018 · 17 views

 

Adding A Tenont
By: Nicholas Burt woodturning
December 14, 2018 · 7 views

 

# 328 Challenge
By: Eddie Castelin
December 11, 2018 · 3,412 views

A couple of basic tips and hints on tools

 

AAW Total Experience Woodturning Tip Donna Zils Banfield with Woodburning Tips
By: American Association of Woodturners
December 10, 2018 · 2,743 views

AAW Total Experience Woodturning Tip Donna Zils Banfield with Woodburning Tips, woodturner,org

 

#327 Lines on a Tree
By: Eddie Castelin
December 10, 2018 · 2,578 views

A couple of basic tips and hints on tools

 

# 326 Tree Topper
By: Eddie Castelin
December 07, 2018 · 4,056 views

A couple of basic tips and hints on tools on making bottle stopper parts and pieces

 

Quick Tip- Sandpaper & Heat
By: woodturningwithtim1
December 03, 2018 · 6,863 views

You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://wtwtim.com/robustlathes.htm I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

# 325 Christmas time
By: Eddie Castelin
December 03, 2018 · 2,249 views

A couple of basic tips and hints on tools

 

AAW Total Experience Woodturning Tip Mark Dreyer with Penturning Tips
By: American Association of Woodturners
November 30, 2018 · 292 views

AAW Total Experience Woodturning Tip: Mark Dreyer with Penturning Tips Visit woodturner.org

 

Moment of Peace - Woodturning Tips
By: Mike Peace Woodturning
November 27, 2018 · 3,521 views

I share a few woodturning tips and share viewer comments in this Moment of Peace #14. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Notes from the Wyomingwoodturner-- November 2018 Sam Angelo
By: WYOMINGWOODTURNER
November 21, 2018 · 2,944 views

In this episode of 'Notes' Sam discusses using a hole saw for inserts-examples of forms or molds for casting-he looks back on his Doughnut chuck video, and shares his views on drying oils and NON-drying oils. Happy Thanksgiving Sam I use Alumilite-clear-slow for my casting projects: link below https://www.alumilite.com/woodturning-supplies Please find my work on these sites: www.wyomingwoodturner.com http://www.samangelo.com/welcome/internet.html https://www.etsy.com/shop/wyomingwoodturnercom Ron Brown's tools and lathe accessories I offer on my website https://goo.gl/LnxTy7

 

# 324 Thanksgiving
By: Eddie Castelin
November 21, 2018 · 1,604 views

A couple of basic tips and hints on tools

 

Glue Blocks for Woodturners
By: Mike Peace Woodturning
November 20, 2018 · 14,988 views

I explain how you make and use a glue block and when it makes sense to do so for woodturning. This wood turning chucking technique has been around for sometime and with good reason. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

# 323 Christmas time
By: Eddie Castelin
November 19, 2018 · 8,239 views

A couple of basic tips and hints on tools

 

How to Hold Small Blanks on the Lathe
By: Mike Peace Woodturning
November 13, 2018 · 4,521 views

I show how to hold small pieces of wood or other material such as bone on the lathe. Perhaps it is an odd shape or you don't have small chuck jaws. There is more than one way to hold blanks on the lathe. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Let's talk woodturning tools
By: Woodturning by Alan Scannell
November 09, 2018 · 180 views

One of my subscribers asked if I could make a video about the tools and their uses. So I put this video together and hopefully it explains the names and what you can do with them.thanks for watching Al You can support me on patreon : www.patreon.com/Alans Please note the videos I make are for entertainment purposes only and should not be replicated. You are responsible for your own safety.

 

Who Uses the Safety Guard on a Wood Lathe?
By: Mike Peace Woodturning
November 06, 2018 · 3,174 views

I demonstrate using the safety guard on my Powermatic 3520 that many woodturners scrap. I demonstrate how it has little impact on any aspect of turning a bowl as I turn the outside of a severely cracked rough turned cherry bowl. I sand the outside and texture and turn the inside without difficulty. If you have a safety cage on your lathe, you might try using it on a hazardous turning due to cracks, voids or an imbalance. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

10 Best Tips I've Learned For Stabilizing Wood with Cactus Juice
By: Casey Martin
November 06, 2018 · 15,334 views

My Instagram: https://www.instagram.com/winecountrywoodworks/ Tools I Use: https://winecountrywoodworks.com/tools-i-use/ Glass Vac Chambers: bestvaluevacs.com (5gal May be out of stock) Vacuum Chamber: https://www.amazon.com/dp/B01HRIY6IO/ref cm_sw_r_cp_api_A124BbZC1FZ18 3 gal https://www.amazon.com/dp/B01HRIYA80/ref cm_sw_r_cp_api_uQi1Bb9367KES Zac's Double Dye video: https://www.youtube.com/watch?v O_eW4R13lFc My blanks: https://www.etsy.com/shop/WineCountrywoodwork OR https://winecountrywoodworks.com/ Podcast: theresincast.com My pens: https://www.winecountrypens.com My email for questions or business inquiries: casey@winecountrypens.com

 

Turn Talk #5 - Shop Safety PSA
By: Billy Burt
November 05, 2018 · 127 views

I decided to call this particular series Turn Talk. Here I will discuss various turning topics that aren't really quick tips, not shop updates and not turning projects. In this episode I talk about shop safety. Failing to properly protect yourself is dangerous. You can lose appendages and worse by being careless and ignoring established safety procedures and practices. Safety should be a habit! If you have questions about anything you've seen me do, ask away. I have pretty thick skin and am not easily offended. I do my best to respond to every comment and question. Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug

 

Measure Twice? Handy Woodturning Tips
By: Mike Peace Woodturning
October 30, 2018 · 1,869 views

I share a great idea for mounting a ruler on your wood lathe and more. This really is handy! I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Tips 010
By: Eddie Castelin
October 29, 2018 · 1,169 views

A couple of basic tips and hints on tools

 

tips 009
By: Eddie Castelin
October 24, 2018 · 1,126 views

A couple of basic tips and hints on tools

 

Treating Cracks and Small Holes in Woodturnings - Pt2
By: Mike Peace Woodturning
October 19, 2018 · 5,779 views

Treating cracks and small holes in a woodturning is something all woodturners face. I share my thoughts on 'fixing' wood turnings and a few tips I have picked up along my turning journey. Click here for Part 1 https://youtu.be/bp-RupR8ICQ I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Treating Cracks and Small Holes in Woodturnings - Pt 1
By: Mike Peace Woodturning
October 19, 2018 · 5,777 views

Treating cracks and small holes in a woodturning is something all woodturners face. I share my thoughts on 'fixing' wood turnings and a few tips I have picked up along my turning journey. I upload new wood turning videos regularly so Ya’ll come back, hear? Click here for Part 2 https://youtu.be/Sae7WCGPYyA As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Turn Talk #4
By: Billy Burt
October 19, 2018 · 203 views

I decided to call this particular series Turn Talk. Here I will discuss various turning topics that aren't really quick tips, not shop updates and not turning projects. I was asked how I determine what I'm going to turn. In this fourth episode I answer this question and talk about how I make 'my' decisions on what the end product will be. I'm by no means saying this is what others should do. It's simply how I go about what ultimately comes off the lathe. If you have questions about anything you've seen me do, ask away. I have pretty thick skin and am not easily offended. I do my best to respond to every comment and question. Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com If you would like to support the channel, T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug

 

Tips 008
By: Eddie Castelin
October 19, 2018 · 954 views

A couple of basic tips and hints on tools

 

Tuesday tip 31 Move bowl blank to balance grain and color
By: Lyle Jamieson
October 16, 2018 · 1,047 views

I show moving the bowl blank while starting between centers to balance the pith and grain for a spectacular bowl. I move the blank in two different axis's. Please welcome a new sponsor to my YouTube family. I have been using Starbond CA glues for a long long time. Check them out at https://www.starbond.com Please see my website http://www.lylejamieson.com for all the resources and tool store. Every tool listed has more information details. See not only the right tools but tips and techniques on how to use them. I have archived my articles written for publications and each of my newsletter broadcasts have all the Q&As listed by topic and indexed table of contents. Please support my sponsors. They make it possible for me to produce this content. http://www.hunterwoodturningtool.com http://www.thompsonlathetools.com https://www.starbond.com

 

Jim Duxbury sharing Tips and Tricks for Woodturning
By: Palmetto Woodturners
October 13, 2018 · 1,591 views

Palmetto Woodturners presents Jim Duxbury on Tips and tricks in creating a woodturning projects. http://duxterity.com/ec

 

T- 007 Tips and Stuff
By: Eddie Castelin
October 12, 2018 · 883 views

A couple of basic tips and hints on tools

 

NOTES from the Wyomingwoodturner October 2018 Sam Angelo
By: WYOMINGWOODTURNER
October 11, 2018 · 2,950 views

Sam responds to recent questions and comments he has received on videos. He shows some recent work and reflects on future videos. At the end of the Sam clarifies his approach to making a tool review video. Please find my work on these sites: www.wyomingwoodturner.com http://www.samangelo.com/welcome/internet.html https://www.etsy.com/shop/wyomingwoodturnercom I now offer Ron Brown's Amazing Doughnut Chuck and other accessories: If you are interested, click here. http://samangelo.com/index.php?route common/home (Video) Carter & Son tools revisited: Handles, Box Scraper, & Parting tool Sam Angelo https://goo.gl/eu3igp

 

# 319 Basic review
By: Eddie Castelin
October 10, 2018 · 2,030 views

A couple of basic tips and hints on tools

 

Tool Tips from Big Guy
By: Eddie Castelin
October 04, 2018 · 1,071 views

A couple of basic tips and hints on tools

 

Tuesday Tip 29. Turning thin stock for a lid
By: Lyle Jamieson
October 02, 2018 · 839 views

Turning thin stock for a lid. This is an easy way to hold thin wood needed without damaging the wood. Sometimes chucks and other holding methods are problematic. Please see my website http://www.lylejamieson.com for all the resources and tool store. Every tool listed has more information details. See not only the right tools but tips and techniques on how to use them. I have archived my articles written for publications and each of my newsletter broadcasts have all the Q&As listed by topic and indexed table of contents. Please support my sponsors. They make it possible for me to produce this content. http://www.hunterwoodturningtool.com http://www.thompsonlathetools.com

 

T-005 Tips
By: Eddie Castelin
September 26, 2018 · 1,153 views

A couple of basic tips and hints on tools

 

How to Change Chuck Jaws - Woodturning Tips
By: Mike Peace Woodturning
September 25, 2018 · 2,302 views

I demonstrate some scroll chuck maintenance tips related to changing scroll chuck jaws for your wood lathe. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

T- 004
By: Eddie Castelin
September 20, 2018 · 1,127 views

A couple of basic tips and hints on tools

 

Quick Tip #14
By: Billy Burt
September 17, 2018 · 76 views

In this Quick Tip I share my DIY solution/method for making hanger loops for ornaments and other hanging turnings. https://acdcreations.com/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ #cheapornamentloops #noornamentloopnoproblem #DIYornamentloops

 

T-003 Tips
By: Eddie Castelin
September 11, 2018 · 1,120 views

A couple of basic tips and hints on tools

 

# 318 Softy
By: Eddie Castelin
September 11, 2018 · 2,134 views

A couple of basic tips and hints on tools

 

T-002
By: Eddie Castelin
September 05, 2018 · 1,181 views

A couple of basic tips and hints on tools, brand new program

 

T-001 Tips
By: Eddie Castelin
August 29, 2018 · 1,426 views

A couple of basic tips and hints on tools

 

# 316 Back to it.
By: Eddie Castelin
August 29, 2018 · 3,127 views

A couple of basic tips and hints on tools

 

Notes from the WyomingWoodturner AUGUST 2018 with Sam Angelo
By: WYOMINGWOODTURNER
August 20, 2018 · 3,767 views

In the 2018 August addition to 'notes' Sam will give information on Doug Schneiter and his Basket Illusion pieces. (more links below on classes he offers and his indexing wheel) Sanding and turning safely in reverse are important topics Sam will also cover. Doug's Classes at the Loveland Woodcraft Store..... e-mail dougschneiter@gmail.com https://www.woodcraft.com/stores/loveland/classes Doug's work https://goo.gl/5R5ESn Ron Brown's tools and lathe accessories I offer on my website https://goo.gl/LnxTy7

 

Woodturning - Green Turning Butternut (And Tips for New Turners!)
By: Woodturner Ky
August 19, 2018 · 4,424 views

My apologies for getting behind in Videos, and please excuse any shortcomings in this upload. Let me know if you found any of the info in this video helpful. I hope everyone is doing well!

 

Turn Talk #3
By: Billy Burt
August 17, 2018 · 92 views

I decided to call this particular series Turn Talk. Here I will discuss various turning topics that aren't really quick tips, not shop updates and not turning projects. Just some general turning information about things I have experienced or discovered. In this third episode I talk about wood turners being referred to as wood wasters by many flat wood workers. Yes, I've seen turners waste wood. But I've seen other wood workers waste this precious resource as well. So I talk about some ways we can minimize this waste. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com Proud member of Makers Media Network: https://makersmedianetwork.com

 

AAW Total Experience Woodturning tip Eric Lofstrom
By: American Association of Woodturners
August 10, 2018 · 3,045 views

AAW Total Experience Woodturning tip: Eric Lofstrom with important Biomechanics information. Music: 'Life of Riley' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License

 

# 313 bristle brush
By: Eddie Castelin
August 03, 2018 · 1,884 views

A couple of basic tips and hints on tools

 

Notes from the Wyomingwoodturner: July, 2018 with Sam Angelo
By: WYOMINGWOODTURNER
July 25, 2018 · 3,130 views

Sam brings you up-to-date on some things happening in his shop. At the top of the list is an all day demonstration on July 28, 2018 by Doug Schneiter that will take place in Sam's shop-put on by the Worland Wyoming Woodturners. Sam answers some questions from viewers and shows off a nice pair of Noise Cancelling Headphones he recently acquired. Find out if Coco finally upstages Sam....(yes of course) To find more of Ron Brown's lathe accessories visit one of these sites. www.wyomingwoodturner.com OR www.samangelo.com

 

# 310 rings and photos
By: Eddie Castelin
July 14, 2018 · 1,419 views

A couple of basic tips and hints on tools

 

Notes from the Wyomingwoodturner with Sam Angelo June 2018
By: WYOMINGWOODTURNER
June 25, 2018 · 2,935 views

Sam answers questions in his latest addition to 'Notes from the Wyomingwoodturner' Some topics include a shout-out to the UK and Ireland Woodturning Symposium, a comment about a draw bar, a little on finishing and a toast to his son Daniel and his new bride Shauna who recently were married. To see my work visit, my ETSY shop www.wyomingwoodturner.com and www.samangelo.com I now offer Accessories produced by Ron Brown: (link) https://goo.gl/AEQFVG

 

#makerMonday Episode 6
By: Mike Pickett
June 18, 2018 · 134 views

Episode 6 in Season 1 of #makerMonday. It's not who you think! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Please help these channels and go leave a like, a comment or subscribe to their content! John's Channel https://www.youtube.com/channel/UC2hWlsf15z-7-smBhGdZvNg Makers Media Network Channel https://www.youtube.com/channel/UCbjYrhnIA3p1G6h15QCEidg Charles' Channel https://www.youtube.com/user/desertbum1960 Mark's Channal https://www.youtube.com/user/dusty82elky Richard's Channel https://www.youtube.com/channel/UCRA71DoDY4qhdUnqtd9tu7w * * * * *

 

'Woodturning Tip Clips' Part V
By: Woodturning Arts
June 13, 2018 · 738 views

Links to the full videos: Arm Armor: https://youtu.be/o7F5Ne2GuA4 Accenting Live Edge Bowl with Pyro: https://youtu.be/SempB7KqIG0 Discussion on Finding Burl: https://youtu.be/5Zwq-Osvc48 Tutorial on Epoxy and Other Tips: https://youtu.be/0MVRVOAvD0c Like/Share/Comment/Subscribe and Thanks for Watching! Important Links: About This Channel: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/about?view_as subscriber Channel Discussion Page: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/discussion?view_as subscriber My Playlists: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/playlists?view_as subscriber

 

More Wood Turning Tips from Mike Peace
By: Mike Peace Woodturning
June 12, 2018 · 2,634 views

A few more woodturning tips including some on the Bandsaw and the Echo Dot. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Robert Sorby ProEdge hints and tips 2018
By: Robert Sorby
June 11, 2018 · 6,111 views

Pro Edge Sharpening system from Robert Sorby

 

'Woodturning Tip Clips' Part IV
By: Woodturning Arts
June 11, 2018 · 897 views

Links to the full videos: Saving the Natural Edge When Coring Part 1: https://youtu.be/LNnz-r7SQd8 Saving the Natural Edge When Coring Part 2: https://youtu.be/GPZwAl3bxkA Gathering Logs for Woodturning: https://youtu.be/35oztCPq5P8 Cutting Walnut Blanks: https://youtu.be/fvG0VSjwWxU Mounting Natural Edge Bowl with Spur Drive: https://youtu.be/GgOpxldeLUU Like/Share/Comment/Subscribe and Thanks for Watching! Important Links: About This Channel: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/about?view_as subscriber Channel Discussion Page: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/discussion?view_as subscriber My Playlists: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/playlists?view_as subscriber

 

#makerMonday Episode 5
By: Mike Pickett
June 11, 2018 · 113 views

Episode 5 in Season 1 of #makerMonday. A small hint for this weeks channel - it's not Thor... Please help these channels and go leave a like, a comment or subscribe to their content! Keith's Channel: https://www.youtube.com/channel/UCUQXrkk8nktQ5N7iup13Brg If you have any questions please feel free to comment below! Subscribe for more: http://bit.ly/2oEYEOc Come join me on: Facebook: https://www.facebook.com/knotandburlwoodworks Instagram: @knotandburlwoodworks Help keep the videos and projects going: Patreon Account: http://patreon.com/knotandburlwoodworks Starting at only 1.00 / month!!! Color Grading provided by Peter McKinnon's LUT Pack: https://sellfy.com/p/EaHg/ Music : ‘Music by Epidemic Sound (http://www.epidemicsound.com)’ Proud Member of: The Makers Media Network: https://makersmedianetwork.com/ Small Workshop YouTube Makers: https://www.facebook.com/groups/SmallWorkshopYouTubeMakers

 

'Woodturning Tip Clips' Part III
By: Woodturning Arts
June 10, 2018 · 921 views

Oneway Bowl Steady: https://youtu.be/hxk8nWw_z0o Oneway Easy Core Cutter Sharpening: https://youtu.be/5qEhGku2FCY Woodcut Tools Pro Mount: https://youtu.be/ucfaKWiD33Y Like/Share/Comment/Subscribe and Thanks for Watching! Important Links: About This Channel: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/about?view_as subscriber Channel Discussion Page: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/discussion?view_as subscriber My Playlists: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/playlists?view_as subscriber

 

'Woodturning Tip Clips' Part II
By: Woodturning Arts
June 09, 2018 · 1,768 views

Changing Regular Grind to Fingernail Grind: https://youtu.be/bB_FYKKJawE Loading Logs Using an ATV Lift: https://youtu.be/eXg82nqhrp0 Chucks and Jaw Sizes: https://youtu.be/4P38DVxvOjE Like/Share/Comment/Subscribe and Thanks for Watching! Important Links: About This Channel: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/about?view_as subscriber Channel Discussion Page: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/discussion?view_as subscriber My Playlists: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/playlists?view_as subscriber

 

'Woodturning Tip Clips' Part I
By: Woodturning Arts
June 09, 2018 · 1,557 views

Working a Natural Edge Rim-Olive Wood: https://youtu.be/ACVSBIoiWBo Coring: https://youtu.be/SX3IonqwWlU Dealing with a deep crack: https://youtu.be/wUdzyaIaaR0 Mounting a face plate: https://youtu.be/DKhX3AOu7Y8 Like/Share/Comment/Subscribe and Thanks for Watching! Important Links: About This Channel: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/about?view_as subscriber Channel Discussion Page: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/discussion?view_as subscriber My Playlists: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/playlists?view_as subscriber

 

Comments and Questions # 134
By: The Wood Whirler
June 02, 2018 · 915 views

Sharing my comments and questions.

 

Quick Tip #13
By: Billy Burt
May 26, 2018 · 89 views

In this Quick Tip I share one possible solution for turning a mistake into a feature. https://acdcreations.com/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ #highlightmistakes #turnmistakesintofeatures #accidentalfeature

 

Notes From the Wyomingwoodturner May 2018 with Sam Angelo
By: WYOMINGWOODTURNER
May 24, 2018 · 3,263 views

Sam delivers lots of information and tips in this video. There is a cameo appearance with Zac Higgins of NV WoodWerks, while he is in the instant Gallery at the Utah Symposium. New talented young turner: A big shout-out to Brent----See his YouTube channel... Made by Brent https://goo.gl/zqvxdz A promising 17 year old woodturner--watch one of his videos and subscribe.... June 23 Casper Symposium with Sam as Demonstrator: for info call Sarah: 307-268-3847 ext. 3847 For Kingspor Sandpaper....contact Madison Weaver @ MWeaver@klingspor.com Finally a great woodturning tip from Eli Avisera-turning a long thin spindle. Enjoy!

 

Quick Lathe Tip: Re-Chucking Bowls
By: Braxton Wirthlin
May 19, 2018 · 1,343 views

When re-chucking bowls it's super handy to mark the bottom of the bowl in correspondence with your chuck. that way when you go to re-chuck the bowl it'll line up nicely and wont require any returning. braxton@timbermfg.com www.braxtonwirthlin.com Instagram - https://instagram.com/bwirthlin/ twitter - https://twitter.com/bwirthlin facebook - https://www.facebook.com/timbermanufa... Snapchat - braxtonwirthlin

 

Quick Tip #12
By: Billy Burt
May 05, 2018 · 194 views

In this Quick Tip I share my solution for a spray finishing stand without buying a lazy susan. https://acdcreations.com/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ #finishingstandhack #nolazysusannoproblem #lazysusanstandin

 

Woodturning Walnut 2 for 1 and Tips!
By: Woodturning Arts
May 04, 2018 · 742 views

In this video I turn two Walnut bowls. Like/Share/Comment/Subscribe and Thanks for Watching! Audio Information Track #1 Stalling by Topher Mohr and Alex Elena Track #2 Sleepy Jake by Silent Partner Track #3 Words by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

DIY Box Depth Gage - Tips for Woodturners
By: Mike Peace Woodturning
May 04, 2018 · 1,834 views

I show some alternative calipers when turning a box on your wood lathe, one you can make yourself I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Woodturning a Walnut Crotch Bowl and Tips!
By: Woodturning Arts
May 03, 2018 · 5,451 views

Turning a Walnut crotch wood bowl and a few tips! Video links for making and finishing the 'Empty Bowls' Charity Event bowl: Turning the Walnut Burl Bowl: https://youtu.be/4m4XkTxubWU Finishing the Walnut Burl Bowl: https://youtu.be/vH48UMkvKeE Like/Share/Comment/Subscribe and Thanks for Watching! Audio Information Track #1 Santo Rico by Twin Musicom Track #2 Not Me by Silent Partner Track #3 Our Distance by Silent Partner

 

A Somewhat Odd, Somewhat Off-center Cedar Bowl
By: RickTurns
April 30, 2018 · 32,698 views

From a left-over piece of cedar, I turn a really weird bowl.

 

Magnetic Pickup Tool and More - Turning Tip
By: Mike Peace Woodturning
April 24, 2018 · 2,436 views

Mike offers a couple of tips useful to woodturners. One is the usefulness of a a magnetic pickup tool around the lathe. I upload new wood turning videos regularly so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Woodturning Madrone Tutorial and Tips!
By: Woodturning Arts
April 22, 2018 · 1,773 views

I demonstrate sharpening the Oneway Easy Core cutters, Turn a 'whacked out' Madrone blank and discuss the gouges i use to turn my bowls. Like/Share/Comment/Subscribe and Thanks for Watching! Audio Information Track #1 Earle_s_Bar_Room_Rocker Track #2 Log Cabin by Silent Partner

 

Woodturning -'Walnut and Nails' & Tips!
By: Woodturning Arts
April 20, 2018 · 2,728 views

I turn a Walnut blank with nails in it and try to save it. Like/Share/Comment/Subscribe and Thanks for Watching! Audio Information Track #1 Across The Room by Letter Box Track #2 Believer by Silent Partner Track #3 Elephants by Huma-Huma

 

Shop Tips, Tricks, and Jigs
By: Lee Burkholder
April 19, 2018 · 346 views

Cumberland Valley Wood Turners, woodworking, woodturning, lathe, shop tips, wood jigs, cutting angles, segmented turning,

 

Quick Tip #11
By: Billy Burt
April 15, 2018 · 95 views

In this Quick Tip I share my method for... let's just say unwanted CA (super glue). https://acdcreations.com/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ #removingunwantedCA #removingsuperglue #removingexcessCA

 

Woodturning Walnut/Elm Cores and Tool Tips!
By: Woodturning Arts
April 11, 2018 · 840 views

Woodturning a Walnut and Elm core and a few tips thrown in. Here's the links to the coring videos: https://youtu.be/GgOpxldeLUU https://youtu.be/4P38DVxvOjE Like/Share/Comment/Subscribe and Thanks for Watching! Audio Information Track #1 Easy Day by Kevin MacLeod Track #2 Cheating Juarez by John Deley and the 41 Players Track #3 The Twister by Dan Lebowitz

 

Quick Tip #10
By: Billy Burt
April 04, 2018 · 56 views

In this Quick Tip I share an inexpensive storage option for small parts and material for filling voids. https://acdcreations.com/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ #cheapstorageoptions #freestorageoptions #cheapsmallpartsstorage

 

Notes from the Wyomingwoodturner, March 2018: Sam is Moving?
By: WYOMINGWOODTURNER
March 28, 2018 · 4,192 views

Sam answers questions and responds to comments in the March addition of 'Notes.....' His main focus is on Moving out of Wyoming. Any advice on a bench top 6' jointer? Looking for recommendations. See my work at http://wyomingwoodturner.com and www.samangelo.com OR, Visit my ETSY shop at---https://goo.gl/hCnSEb

 

Woodturning Burl Tips and Metal Detector Review
By: Woodturning Arts
March 25, 2018 · 1,335 views

I review a metal detector for locating nails in wood and turn a Bay Burl with tips and techniques. Like/Share/Comment/Subscribe and Thanks for Watching! Audio Information Track #1 Shawl Paul by Norma Rockwell

 

Woodturning Tutorial on Epoxy Repairs and Other Tips
By: Woodturning Arts
March 22, 2018 · 2,960 views

I give a basic tutorial on filling cracks with pigmented epoxy and other tips. Like/Share/Comment/Subscribe and Thanks for Watching! Audio Information Track #1 Casey Don’t You Fret by Dan Lebowitz

 

Woodturning the Madrone Core and Demo the Gage'T Wall Thickness Gauge
By: Woodturning Arts
March 21, 2018 · 915 views

I turn the Madrone core from my last video and show how I use the Gage'T bowl Gauge. Like/Share/Comment/Subscribe and Thanks for Watching! Audio Information All Tracks Windows Rolled Down by The 126ers

 

Quick Tip #9
By: Billy Burt
March 21, 2018 · 76 views

In this Quick Tip I talk about an advantage I discovered in using a quick release type tool handle. https://acdcreations.com/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ #quickreleaseadvantage #easytoolsharpening #quickreleasesharpeningadvantage

 

Woodturning - Talking Turning & Tea - New Tech, Hidden Heroes of Lancashire
By: Blind Woodturner
March 20, 2018 · 299 views

In this Talking Turning & Tea, I talk about our new editing tech and a forthcoming event, Hidden Heroes of Lancashire. *** Join me, Chris Fisher, the Blind Wood Turner, in my workshop. I started out in life as a regular guy, working in auto body repair at BMW, until one day, completely out of the blue, a rare virus (Toxoplasmosis) reared its ugly head and caused me to lose my sight in a matter of weeks. Despite the challenges of coming to terms with losing my sight, I refused to give up and, after four years I decided to take up woodturning so that I could make myself a vampire stake – I’m

 

Woodturning – Talking Turning & Tea - Projects and Recent Demos
By: Blind Woodturner
March 19, 2018 · 311 views

Join me as I show you some of my recent projects done at home and also during public demonstrations for Axminster Tools and Machinery. I also go on to talk about upcoming demos and other things in the near future. *** Join me, Chris Fisher, the Blind Wood Turner, in my workshop. I started out in life as a regular guy, working in auto body repair at BMW, until one day, completely out of the blue, a rare virus (Toxoplasmosis) reared its ugly head and caused me to lose my sight in a matter of weeks. Despite the challenges of coming to terms with losing my sight, I refused to give up and, aft

 

Turn Talk #1
By: Billy Burt
March 15, 2018 · 220 views

I decided to call this particular series Turn Talk. Here I will discuss various turning topics that aren't really quick tips, not shop updates and not turning projects. Just some general turning information about things I have experienced or discovered. In this first episode I will tell you what I have recently learned based on my experience with tool steels. Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com

 

Quick Tip #8
By: Billy Burt
March 14, 2018 · 50 views

In this Quick Tip I talk about storing and transporting your pens and some methods I use. Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com Woodturningz Binders http://www.woodturningz.com/results.aspx?k binder https://acdcreations.com/ I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ #storingpens #transportingpens #penbinders

 

AAW Totoal Experience Woodturning tip, Kristin LeVier
By: American Association of Woodturners
February 27, 2018 · 676 views

AAW Totoal Experience Woodturning tip: Join us in Portland for our 2018 annual symposium, Kristin LeVier, Safe packing and shipping tips. Music: 'Life of Riley' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License

 

AAW Totoal Experience Woodturning tip, John Beaver
By: American Association of Woodturners
February 27, 2018 · 1,005 views

AAW Totoal Experience Woodturning tip: Join us in Portland for our 2018 annual symposium, John Beaver, Tips for Photographing your Work Music: 'Life of Riley' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License

 

# 287 Live Center Tips
By: Cap'n Eddie Castelin
February 26, 2018 · 5,919 views

Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at capneddiecastelin@gmail.com or www.eddiecastelin.com

 

AAW Total Experience Woodturning tip from Glenn Lucas
By: American Association of Woodturners
February 08, 2018 · 3,330 views

Get the Total Experience from AAW with this tip by woodturning master, Glenn Lucas. Music: 'Life of Riley' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License

 

AAW Total Experience Woodturning tip Jimmy Clewes
By: American Association of Woodturners
February 08, 2018 · 4,665 views

AAW Total Experience Woodturning tip: Jimmy Clewes Tip on creating a micro bevel to improve the cuts inside your platter or bowl. Music: 'Life of Riley' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License

 

AAW Total Experience Woodturning Tip Joshua Friend
By: American Association of Woodturners
February 08, 2018 · 126 views

AAW Totoal Experience Woodturning tip: Monthly Drawing with Joshua Friend tip.Music: 'Life of Riley' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License

 

AAW Total Experience Woodturning Tip Richard Dlugo
By: American Association of Woodturners
February 08, 2018 · 168 views

AAW Totoal Experience Woodturning tip: Join us in Portland for our 2018 annual symposium, Richard Dlugo turning a yoyo.. Music: 'Life of Riley' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License

 

AAW Total Experience Woodturning Tip Tom Wirsing
By: American Association of Woodturners
February 08, 2018 · 390 views

AAW Totoal Experience Woodturning tip: Join us in Portland for our 2018 annual symposium, Tom Wirsing sharpening tip. Music: 'Life of Riley' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License

 

Quick Tip #6
By: Billy Burt
February 07, 2018 · 35 views

In this quick tip I share my method for keeping track of the plans for the various pens I turn. https://acdcreations.com/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ #penkitinstructions #penassemblyinstructions #penkitinstructionbinder

 

Notes From the Wyomingwoodturner February 2018 with Sam Angelo
By: WYOMINGWOODTURNER
February 06, 2018 · 3,317 views

Sam answers some questions and celebrates his third anniversary after his accident...(For details see link below) ...He also displays his Goblet set with 3 of the 6 goblets completed. This is the SECOND upload on this video. The first was messed up. Thanks Sam Video Link: My Accident https://www.youtube.com/watch?v ThMHyEeG8BM See my work at http://wyomingwoodturner.com and www.samangelo.com

 

Quick Tip #5
By: Billy Burt
February 06, 2018 · 50 views

In this quick tip I share my method of keeping CA fumes from becoming an irritant. https://acdcreations.com/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ #CAfumes #keepingCAfumesaway #nomoreCAfumes

 

How to Flatten Wood on the Lathe
By: Mike Peace Woodturning
January 30, 2018 · 4,427 views

I show a simple trick for flattening a wood surface on a wood turning project. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

How to Glue End Grain - Wood Turning Tip of the Week
By: Mike Peace Woodturning
January 16, 2018 · 4,808 views

I explain a glue trick when gluing end grain wood turning projects. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

AAW Total Experience Woodturning tip from Mike Mahoney
By: American Association of Woodturners
January 16, 2018 · 7,562 views

Get the Total Experience from AAW with this tip by woodturning master, Mike Mahoney. This video complements the article entitled, 'A Closer Look at Shear-Scraping,' by Mike Mahoney, featured in the June 2017 issue of American Woodturner.

 

Turning Tip of the Week
By: Mike Peace Woodturning
January 02, 2018 · 3,091 views

I respond to viewer comments and talk about Facebook. I talk about wood blanks. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Top 10 Tips for Bowl Scrapers
By: Mike Peace Woodturning
December 29, 2017 · 10,475 views

I demonstrate 10 Tips for Sharpening and Using a Round Nose Bowl Scraper on your wood lathe. These tips should help demystify how a scraper works. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Get Those Burn Lines Evenly Spaced!
By: RickTurns
December 28, 2017 · 2,965 views

Are you obsessive over your burn line spacing? Okay, probably not. But I am. And this is how I satisfy my obsession with burn lines that are regularly spaced. The music during the close of the video, 'Happy Little Elves' by Audionautix, is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Notes From the wyomingwoodturner December 2017 Sam Angelo
By: WYOMINGWOODTURNER
December 27, 2017 · 2,959 views

The last 'Notes' for 2017.....Have a Happy, Prosperous, and SAFE 2018. Sam See my work at: www.samangelo.com www.wyomingwoodturner.com Etsy shop: wyomingwoodturner https://tinyurl.com/yaj2edkp Searching a YouTube Channel for a video on Youtube: https://tinyurl.com/yc6wsgy8

 

Tuesday tip #25, Turn the nub in the bottom inside hollow forms
By: Lyle Jamieson
December 12, 2017 · 1,645 views

This method takes all the frustration out of turning the dreaded nub in the bottom of the hollow form vessel. This technique will work with any hollowing tools.

 

Quick Tip #4
By: Billy Burt
December 10, 2017 · 78 views

In this Quick Tip, I show a solution for something that doesn't happen often, but it may happen occasionally. Just because you turn between centers and cut a tenon for your scroll chuck doesn't mean it will chuck up true. Watch for my solution. https://acdcreations.com/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ #chuckingtrue #makingchuckruntrue #chucktruetrick

 

Quick Tip #3
By: Billy Burt
December 10, 2017 · 35 views

In this Quick Tip I show how I sand tubes for my pen blanks. It's faster and more efficient than doing it by hand. I have yet to have a glue-up failure using this method. https://acdcreations.com/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ #pentubeprep #sandingpentubes #quickpentubesanding

 

Tuesday tips #24 Remove tool marks from inside Hollow Forms
By: Lyle Jamieson
December 05, 2017 · 2,139 views

Removing tool marks from inside hollow forms is easy and quick. Start with the lathe off and clean up surface lightly.

 

How to Display Wood Turned Bowls and Platters?
By: Mike Peace Woodturning
December 01, 2017 · 4,110 views

I demonstrate some ways to make stands for displaying that wood turned bowl or platter you want to show off. Turning it is just the beginning. You want to show it to its best advantage. At the end I have a slide show of some of the bowls and platters I have displayed with the various stands. Here is a link to the Platter stand plans from thje South Aukland Woodturners Guild https://sawg.org.nz/sawg/wp-content/uploads/2011/09/plate-stand-2.pdf I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Notes from the Wyomingwoodturner December 1, 2017 Sam Angelo
By: WYOMINGWOODTURNER
December 01, 2017 · 3,452 views

Notes from the Wyomingwoodturner Dec 1, 2017 OK....it is NOT now thanksgiving morning. But it was when I started this video. Sam sends out a big Thank You to his subscribers -as well as a shout out to the all his viewers around the globe. He answers some questions and brings you up to date on his Giant, crazy nutcracker...

 

Quick Tip #2
By: Billy Burt
November 12, 2017 · 121 views

This quick tip talks about two things: 1) making taps for your spindle or live center, and 2) using Formica veneered plywood for segmented turnings. I show how I used the tap for my live center and how you can use reclaimed cabinet material for segmented turning setup. https://acdcreations.com/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ #DIYwoodtaps #createyourownwoodtaps #easywoodtaps

 

Quick Tip #1
By: Billy Burt
November 10, 2017 · 66 views

A quick tip for how I use a piece of Corian and hot glue to send small rings and other pieces through my drum sander. https://acdcreations.com/ Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com I am a proud member of Makers Media Network: https://makersmedianetwork.com Sponsored by: https://harnealmedia.com/ If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug/ #drumsander #drumsandertrick #segmentedringtrick

 

Mini guida tornitura *3 Parte* - Tips - Mini Guide To Woodturning
By: Livio Maritati
November 09, 2017 · 11,794 views

Nella terza puntata della serie sulla tornitura i nonni del Web presentano alcuni suggerimenti relativi alla sicurezza accanto a tips su aspetti tecnici. ENGLISH SUBTITLES

 

Utility Bowl Finish for Wood Turners - Tip of the Week
By: Mike Peace Woodturning
November 07, 2017 · 4,531 views

I explain what I use for a utility bowl finish and options in this turning tip of the week. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful wood turning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Tuesday Tip 23. Laser measuring
By: Lyle Jamieson
November 07, 2017 · 923 views

Set up and use techniques for the laser system. Its not the laser its the gap that does the measuring.

 

Miniguida tornitura* 2 Parte * - Gli altri utensili - Mini Guide To Woddturning
By: Livio Maritati
November 04, 2017 · 17,620 views

Seconda puntata della serie sulla tornitura, in cui i nonni del Web presentano lo scalpello obliquo (Skew Chisel), il troncatore (Parting Tool) ed il raschio (Scraper) - MINI GUIDE TO WOODTURNING - ENGLISH SUBTITLES

 

A Woodturning Tip To Eliminate Wobble
By: As Wood Turns
November 03, 2017 · 4,719 views

http://www.AsWoodTurns.com For this project video, I had planned an inside out ornament - a really special one. To my dismay, it broke. Due to the imminent deadline, I switched to a walnut tea light with flashing LED. As I first mounted the wood to my lathe, I put things together about how I was mounting compared to another demonstration I saw recently. So I decided to give a great tip on why I mount many wood blocks to the lathe as I do. (Details inside. :) ) My walnut tea light is about five inches in diameter and about three inches high, finished with lacquer. It holds a battery operated flashing tealight for fire safety. Enjoy! Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Traumerei by Shumann performed by Becky Schlappi. Used by permission.

 

Notes from the Wyomingwoodturner Nov 3, 2017 Sam Angelo
By: WYOMINGWOODTURNER
November 03, 2017 · 3,862 views

In this episode of 'Notes' Sam covers drying wood, shows the Giant Nutcracker head, a cool firewood carrier, and comments and responds to questions. AND he shares two links to articles by Bob Flexner on food safe finishes. Links and info below. Food Safe finishes by Bob Flexner “Let your nose be your guide” Article in American Woodturner Spring 2008 vol 23, no. 1 www.woodturner.org WoodCentral article on food safe finishes: https://tinyurl.com/yd5tkm3b Or: http://www.woodcentral.com/articles/finishing/articles_497a.shtml

 

Glue for Wood Turning Revisited - Wood Turning Tip of Week
By: Mike Peace Woodturning
October 31, 2017 · 3,889 views

I share all of the collective wisdom from viewer comments to my earlier Tip of the Week on Wood Glue for Woodturners. I am actually using a picture from viewer Bill Kibby for the thumbnail. Thanks for all of your comments that help to support this channel I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Tuesday Tips #22. Sandpaper cutter.
By: Lyle Jamieson
October 31, 2017 · 1,004 views

I use flat sheets of sandpaper and cut the sheets in quarters. Screw a sharp metal strip on the edge of the table in a convenient place with size lines for the cuts.

 

Mini guida tornitura * 1 Parte * - Le 3 sgorbie principali - Mini Guide to Woodturning
By: Livio Maritati
October 28, 2017 · 30,560 views

Questo è il primo di una piccola serie di video sulla tornitura dedicata ai principianti. I nonni del Web presentano le sgorbie da sgrosso, a profilare e da scavo. -ENGLISH SUBTITLES-

 

Tuesday Tip #21 Use pilot holes to put glue block on faceplate.
By: Lyle Jamieson
October 24, 2017 · 2,922 views

Using a glue block correctly is a much stronger and safer method to attaching bowl blanks to the lathe. Make sure the concave surface is done on the lathe between centers and drill counter sink holes in the dry wood glue block.

 

Notes from the Wyomingwoodturner Oct 23, 2017 Sam Angelo
By: WYOMINGWOODTURNER
October 23, 2017 · 3,278 views

In this installment of 'Notes from the Wyomingwoodturner' Sam brings you up-to-date on some recent projects and comments on a few 'comments' he has received recently. Website for Rick Orr: http://fishtailflyrodtubes.com Yes he makes fly rods too....

 

Nova Live Center Soft Touch Again - Wood Turning Tip of the Week
By: Mike Peace Woodturning
October 17, 2017 · 3,184 views

I share a tip from a viewer for an inexpensive way to make a variety of specialty tips for your Nova Live Center using a 5/16' threaded rod. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Tuesday Tips #20 Use air chisel
By: Lyle Jamieson
October 17, 2017 · 3,618 views

Make sure the bark is secure or remove it. The air chisel will take all the hard work out of it. I usually remove the bark from my natural edge bowls.

 

Shop Tips
By: Lee Burkholder
October 16, 2017 · 255 views

Cumberland Valley Wood Turners, wood turning, wood working, lathe, shop tips, wood shop, turning wood, tips, wood

 

Moment of Peace #13 - Wood Turning
By: Mike Peace Woodturning
October 13, 2017 · 2,339 views

I respond to viewer comments and suggestions about my woodturning videos, provide turning tips and share wood turning information that may help with your lathe work. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Glue for Wood Turners - Tip of the Week
By: Mike Peace Woodturning
October 10, 2017 · 4,910 views

I talk about the different glues I use in wood turning and why I use them. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Tuesday Tip # 19 Use of a plastic sheet to find centers
By: Lyle Jamieson
October 10, 2017 · 1,141 views

I am back from a break and hope to post regularly again. Two major things have kept me away from my YouTube family. I remodeled my kitchen. It always take longer than expected. And I have recently had my machinist/welder retire after nearly twenty years of manufacturing my tools for me. It was a big job to get a replacement (s). I apologize for my absence. Lyle Jamieson

 

Notes from the Wyomingwoodturner- October 9th 2017-Sam Angelo
By: WYOMINGWOODTURNER
October 09, 2017 · 3,368 views

In this week's installment of 'Notes from the Wyomingwoodturner' Sam displays nutcracker figures and Christmas angel ornaments that he will donate to a local fundraiser. And he shares a few products he uses in his shop and some helpful ideas for woodturning. Link to Chroma Craft..... https://www.chroma-craft.com/ Stick Fast stabilizing resin dye: https://www.woodturnerscatalog.com/p/16/6017/Stick-Fast-Stabilizing-Resin-Dye To see more of my work visit: www.samangelo.com www.wyomingwoodturner.com

 

Alternative Ways of Holding Your Work
By: Lee Burkholder
October 09, 2017 · 654 views

Cumberland Valley Wood Turners, lathe, wood turning, woodworking, turning,

 

Woodturning Tips and Tricks - Part 3 of 3
By: DentonTurners
October 05, 2017 · 3,603 views

Our club members take one meeting each year to share tips, tricks, gadgets, and gizmos they use in their wood turning. This is part three of a three part series sharing those tips. Enjoy!! (We apologize in advance for some of the minor audio issues in some of these presentations) The Golden Triangle Woodturners meet on the first Monday of each month in the Center for Visual Arts in Denton Texas (Corner of Hickory and Belle Streets) at 7 pm. All are welcome to attend.

 

Woodturning Tips and Tricks - Part 2 of 3
By: DentonTurners
October 03, 2017 · 3,742 views

Our club members take one meeting each year to share tips, tricks, gadgets, and gizmos they use in their wood turning. This is part two of a three part series sharing those tips. The last part will be posting in the coming days. Enjoy!! (We apologize in advance for some of the minor audio issues in some of these presentations) The Golden Triangle Woodturners meet on the first Monday of each month in the Center for Visual Arts in Denton Texas (Corner of Hickory and Belle Streets) at 7 pm. All are welcome to attend.

 

NOTES FROM THE WYOMING WOODTURNER OCT 2 2017
By: WYOMINGWOODTURNER
October 02, 2017 · 3,566 views

In this video Sam passes on some ideas about casting resin using a wooden bowl as a mold, a little more on safety issues and what a SDS (safety data sheet) is, and a few photos of his current work. To see the previous 'Notes from the Wyomingwoodturner' video click here: https://www.youtube.com/watch?v WdbODpqAK-o&t 166s

 

Woodturning Tips and Tricks - Part 1 of 3
By: DentonTurners
October 02, 2017 · 7,875 views

Our club members take one meeting each year to share tips, tricks, gadgets, and gizmos they use in their wood turning. This is part one of a three part series sharing those tips. The other two parts will be posting in the coming days. Enjoy!! (We apologize in advance for some of the minor audio issues in some of these presentations) The Golden Triangle Woodturners meet on the first Monday of each month in the Center for Visual Arts in Denton Texas (Corner of Hickory and Belle Streets) at 7 pm. All are welcome to attend. http://www.goldentrianglewoodturners.org

 

Notes from the Wyomingwoodturner: 9.24.17 with Sam Angelo
By: WYOMINGWOODTURNER
September 25, 2017 · 4,541 views

In this video ....Notes from the Wyomingwoodturner, Sam revisits the use of scrapers and passes on some shop ideas and information for fellow woodturners: Rod Tallack's website http://www.sculptureturnery.co.uk Link to Amazon, Kindle book https://tinyurl.com/yakphbaz For more on my work visit: http://www.wyomingwoodturner.com http://samangelo.com

 

Naked Turner Quick Tip, Just A Tip, New Pens
By: Erik Anderson
September 24, 2017 · 1,594 views

Quick Tip for a Pen Turning - - - - - - Please watch: 'Miter Box Pen' https://www.youtube.com/watch?v iefENj4JGJw - - - - - -

 

QUICK TIP #1 Handy Pencil
By: CL Woodturning
September 12, 2017 · 25 views

 

Quick Tip Tuesday Sept 11, 2017: Sam Angelo, wyomingwoodturner
By: WYOMINGWOODTURNER
September 11, 2017 · 5,140 views

Sam shows items he has in his turning shop that he considers 'non-shop stuff.' In this list he includes a Creme Brule torch, vinegar, Q-tips, rubber bands and a 2 1/2 lb barbell weight. Watch the video and see why he thinks these items might be useful in a woodworking shop. To see more of my work visit www.samangelo.com or.... www.wyomingwoodturner.com and find me on ETSY and Facebook

 

Micro Mesh for Wood Turning - Tip of the Week
By: Mike Peace Woodturning
September 06, 2017 · 4,640 views

I demonstrate how I use micro mesh for small bowls that I cannot buff inside. I upload a new wood turning tip every Wednesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? Product Affiliate link to product mentioned in this video https://amzn.to/2Xxsbx0 As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com

 

Simple Chucking Method for the wood lathe: Quick Tip Tuesday-wyomingwoodturner
By: WYOMINGWOODTURNER
September 04, 2017 · 5,132 views

Sam shows a very simple and safe way to quickly form a tenon using the spindle on your lathe. This technique is not intended for heavy pieces of wood or for long term use during the completion of a project. This is a safe and secure method but care should always be held as a high priority. To see more of my work go to....www.samangelo.com or...www.wyomingwoodturner.com ...cause it's Tuesday someplace Please share this video Sam

 

Spindle scraps Followup - Woodturning Tip of the Week
By: Mike Peace Woodturning
August 23, 2017 · 2,208 views

I show some additional woodturning scrap tricks. I upload a new wood turning tip every Wednesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Use Those Spindle Scraps - Woodturning Tip of the Week
By: Mike Peace Woodturning
August 16, 2017 · 4,424 views

I demonstrate how to use all of those spindle scraps you hate to throw away! I upload a new wood turning tip every Wednesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Woodturners Tape - Woodturning TIp of the Week
By: Mike Peace Woodturning
August 02, 2017 · 6,664 views

Here are a few tips about using wood turners doublesided cloth tape. Turner's tape is a great solution for some woodturning projects. I upload a new woodturning tip every Wednesday and a woodturning tutorial video each and every Friday so Ya’ll come back, hear? You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Wood Worm Screw Chuck - Tip of the Week
By: Mike Peace Woodturning
July 26, 2017 · 6,552 views

I explain a couple of tricks for using a woodworm screw chuck on a lathe to mount wood. I upload a new woodturning tip every Wednesday and a woodturning tutorial video each and every Friday so Ya’ll come back, hear? You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Dust Collection Maintenance Tips - Woodturning Tip of the Week
By: Mike Peace Woodturning
July 12, 2017 · 1,805 views

I point out a few DC maintenance tips. I upload a new woodturning tip every Wednesday and a woodturning tutorial video each and every Friday so Ya’ll come back, hear? You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Rubber Spray Handle Grip Coating - Woodturning Tip of the Week
By: Mike Peace Woodturning
July 05, 2017 · 4,250 views

I show how you can use an aerosol rubber spray coating to improve the grip on some of your woodturning tool handles. I upload a new woodturning tip every Wednesday and a woodturning tutorial video each and every Friday so Ya’ll come back, hear? You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Tuesday tip 18 Wax use on boring bar
By: Lyle Jamieson
July 04, 2017 · 1,121 views

I am back from a break and hope to post regularly again. Happy birthday America. Enjoy the holiday festivities with your friends and family.

 

Quick Tips - How to Make a Celtic Knot Blank
By: Wood Club UK
July 04, 2017 · 2,784 views

In the first of a series of quick tip videos, I am going to show you how I make a Celtic Knot pen blank. Though this blank was for a pen, the same method could easily be applied to any other woodturning project that might be enhance with the addition of this beautiful yet simple feature. Please subscribe so you don't miss the rest of this series and some others that I have in the pipeline. Thanks for Watching Find me on Instagram: https://www.instagram.com/chapnell/ Find me on Facebook: https://www.facebook.com/chapnellmakes/ Music: Killing Time by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100570 Artist: http://incompetech.com

 

Work Order Envelopes - Woodturning tip of the Week
By: Mike Peace Woodturning
June 28, 2017 · 1,504 views

In this week's tip I explain the benefits of using a work order envelope to protect a note, picture or diagram you may be using in your shop to protect it and easily locate it. Product Details: http://www.c-lineproducts.com/product_category.php?cat_id shop-ticket-holders This great tip comes from Carl Ford’s Woodturning Blog. Here is a link to his website http://www.carlford.us/blog/ You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Lathe Maintenance - Tip of the Week
By: Mike Peace Woodturning
June 21, 2017 · 2,969 views

I show a few basic lathe maintenance tips. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Protect YourWoodturnings - Tip of the Week
By: Mike Peace Woodturning
June 14, 2017 · 2,213 views

I show an easy way to pack your turnings for travel to a meeting or show. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Spray Dyes for Wood Turning - Tip of the Week
By: Mike Peace Woodturning
May 31, 2017 · 2,163 views

My shop fairy and production assistant shows how easy it is to add color to a wood turning with spray dye. Her color choice, not mine! Spray dye is available from http://Chroma-Craft.com You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Woodturning Tip - Paper Towel Strip Dispenser for Finishing
By: Mike Peace Woodturning
May 24, 2017 · 3,710 views

I show you an easy way to always have a small piece of paper towel ready at the lathe for that small finishing task. Make this handy container to dispense strips of paper towel when you need it. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website https://youtu.be/Aef5TwB7YbQ

 

Tuesday Tip 17 Pull cut on Hollow forms
By: Lyle Jamieson
May 23, 2017 · 1,419 views

Use of a pull cut with my bowl gouge on the outside of a hollow form vessel.

 

Tip of the Week - Save Those Dead Flowers!
By: Mike Peace Woodturning
May 17, 2017 · 1,977 views

I show how you can re-purpose those dead flowers for use in twig pots when giving them away or selling them. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website https://youtu.be/Aef5TwB7YbQ Easy Lemon 60 Second by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1200077 Artist: http://incompetech.com

 

Birdcage Awl - Grind a Better Awl Tip
By: Mike Peace Woodturning
May 09, 2017 · 3,855 views

I explain the bird cage awl and how to grind a better awl tip. A full video on making an awl can be found here: https://youtu.be/0Sc7l7Uz6vY Product link to music wire used for shaft https://amzn.to/2JHCC7x As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com

 

Tuesday Tip 16, Wobble bottom cut
By: Lyle Jamieson
May 09, 2017 · 1,284 views

TT16 I show a way to finish the wall of a vessel after it has dried out of round. This is usually used for finishing the last bit of the side wall near the bottom but this technique could be used on bowls or other out od round turning.

 

Tip of the Week - DC Hood
By: Mike Peace Woodturning
May 03, 2017 · 3,978 views

I redesigned the saddle that rides my lathe bed and holds my dust collector hood on my lathe. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Tuesday Tip 15, Outside Bottom Treatments
By: Lyle Jamieson
May 02, 2017 · 1,050 views

TT 15 shows some design treatments for the bottom of bowls or vessels.

 

Tip of the Week - Grinder Dust Collection
By: Mike Peace Woodturning
April 27, 2017 · 3,019 views

Jamie Donaldson shared this great tip for collecting all of the metal powder that builds up from using a CBN wheel for sharpening. Put a large magnet in a plastic bag. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Tuesdays Tips #14 Carbibe cutter slicing cuts
By: Lyle Jamieson
April 25, 2017 · 1,144 views

TT #14 using the carbide cutter in my boring bar. The slicing cuts are easy and fun and leave a sweet surface behind that needs little sanding.

 

Woodturning Tip of the Week - Replacing Lathe Knobs
By: Mike Peace Woodturning
April 22, 2017 · 3,657 views

This week's woodturning tip is on replacing a stripped Ratchet Knob or adjustable knob on your wood lathe. Sources shown below. Word to the wise, don't crank down as hard as you can with these knobs! http://www.ptreeusa.com/shop_knobs_bolts.htm https://www.woodcraft.com/products/adjustable-handle-with-5-16-18-stud http://www.highlandwoodworking.com/search.aspx?find KNOBS http://www.rockler.com/search/go?asug &w RATCHET KNOB You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

TT9 Set and Use laser measuring
By: Lyle Jamieson
April 22, 2017 · 693 views

Tuesday Tip #9 almost caught up with my Facebook posts. This shows the measurement of a hollow form wall of about 1/8 inch with the laser. Showing both setting the laser and using the laser measuring.

 

WAFFLE ON WED #006/ YANDLES WOODWORKIG SHOW 2017!
By: Nick Zammeti
April 19, 2017 · 6,993 views

CHARLIE THE MAKER (MY SONS CHANNEL) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw YANDLES http://www.yandles.co.uk/upcoming-events/28-yandles-woodworking-show MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.recordpower.co.uk/ CHESTNUT PRODUCTS http://www.chestnutproducts.co.uk/ …………………………………………………………………………

 

Tuesday Tip #8 Move backrest for easy entry into small holes
By: Lyle Jamieson
April 14, 2017 · 739 views

TT 8 Still catching up on videos posted on Facebook. This shows a tip of moving the backrest to allow entry into small holes while hollowing.

 

Set the laser to an existing wall thickness
By: Lyle Jamieson
April 11, 2017 · 717 views

Number 13 in the Tuesday Tips series. Set the laser to an existing wall thickness. This will get a perfect match to the old setting when you move the swivel and the cutting tip position.

 

TT 12 Fiddle factor hollowing through small holes
By: Lyle Jamieson
April 04, 2017 · 1,004 views

Tuesday Tips #12, Yes it is really Tuesday. Technique for hollowing through small entry holes. Slow going but doable, just takes some patience.

 

10 Woodturning Questions Answered
By: M. Saban Smith Woodturning
April 03, 2017 · 4,389 views

So it's thanks to Mike Waldt that this video isn't project video, but it has given me a chance to think about the turning I do, and I hope it sheads some light onto me as a person and a turner rather than just a dude turning on YouTube! I've nominated my good friend Chris Fisher, the Blind Woodturner to follow me on this 10 Questions....over to you, Chris! Follow Chris here: https://www.youtube.com/channel/UCkkxNOUNP8kNT7Gvpc1MjJg The questions are... 1. When did you start woodturning and why? 2. How did you get started? 3. What tools do you use the most? 4. What finish do you prefer? 5. Wha

 

TT 6 Prepare concave surface for Faceplate
By: Lyle Jamieson
April 01, 2017 · 704 views

Another catch-up edition of the Tuesday Tips #6. Use a concave surface to seat a faceplate or glue block. This insures a secure seat for the faceplate and gives a strong, safe gripping surface around the rim of the faceplate. No hump in the middle, no wobble, and no vibration. Stay sharp.

 

TT 5 Good grip between centers
By: Lyle Jamieson
March 31, 2017 · 1,088 views

I start and I finish everything I do between centers. It is important to get a good grip. The stresses of hogging off a blank are severe. Think safety first.

 

TT4 Shaving relief technique
By: Lyle Jamieson
March 30, 2017 · 1,277 views

Still catching up with Tuesday Tips from Facebook. Start hollowing with a cylindrical inside shape and the shavings will roll out.

 

Tuesday Tip 11, Cut into the side grain.
By: Lyle Jamieson
March 28, 2017 · 1,192 views

When hogging off and truing up a blank I always cut into the side grain. It is easier and faster than cutting toward the end grain fibers.

 

Moment of Peace #12 - Wood Turning
By: Mike Peace Woodturning
March 28, 2017 · 1,821 views

I respond to viewer comments and suggestions, provide wood turning tips and share woodturning information. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

TT3 Blow out water from wood
By: Lyle Jamieson
March 27, 2017 · 1,097 views

Still catching up on the Tuesday Tips already posted on Facebook. This one shows the cell structure of wood and the water captured in the tree. So I blow out some 'maple syrup' with compressed air.

 

Tuesday Tip Small entry hollowing
By: Lyle Jamieson
March 25, 2017 · 1,237 views

Make use of the swivel cutter to hollow the shoulder of a small entry hollow form.

 

Tuesday Tips Intro and TT 1 Starting on the balance point
By: Lyle Jamieson
March 21, 2017 · 1,038 views

The first in a series of Tuesday tips posted on my Business Facebook page. Starting on the balance point. Multiple short video techniques will be posted to get caught up and then new tips loaded every Tuesday. Be sure to share these with your club members and turning friends.

 

Nifty Fifty Tips Part 1 of 3
By: Olympic Peninsula Woodturners
March 21, 2017 · 630 views

OPCAAW members Brad Stave, Russell Neyman and Ralph Lindberg demonstrate 50 nifty woodturning shop tips.

 

Nifty Fifty Tips Part 2 of 3
By: Olympic Peninsula Woodturners
March 21, 2017 · 233 views

OPCAAW members Brad Stave, Russell Neyman and Ralph Lindberg demonstrate 50 nifty woodturning shop tips.

 

Nifty Fifty Tips Part 3 of 3
By: Olympic Peninsula Woodturners
March 21, 2017 · 215 views

OPCAAW members Brad Stave, Russell Neyman and Ralph Lindberg demonstrate 50 nifty woodturning tips.

 

#80 10 Questions
By: Yuval Lahav Woodturning
March 20, 2017 · 1,519 views

The 10 questions videos has reached me in the end. Had to do it, for better or worse, I hope some on my viewers will find this video interesting :) Making of a shade video - https://www.youtube.com/watch?v LgsDWb0orSQ Jim's channel - https://www.youtube.com/channel/UC6h82LH3PtdiSHaj_7f09Fg Chris's channel - https://www.youtube.com/user/customchevy03 10 questions play list - https://www.youtube.com/playlist?list PLGWHuGuchXJyN4uo4HdrqmTC9zOXYNJ18 Patreon: https://www.patreon.com/YuvalLahav Twitter: https://twitter.com/YL_Woodturning Instagram: https://www.instagram.com/yuval_lahav_woodtur

 

10 Questions
By: Jim Overton - Jimson's Stuff
March 19, 2017 · 2,133 views

My name is Jim Overton, welcome to my channel. Thanks for watching. Please like, share and subscribe. 10 Questions playlist https://www.youtube.com/playlist list PLGWHuGuchXJyN4uo4HdrqmTC9zOXYNJ18 Stephen's channel Stephen's 8x6 workshop https://www.youtube.com/channel/UC8SLw_zYEappZL5rROwvZ1w Yuval Lahav's channel https://www.youtube.com/user/yuvallahav Milliput epoxy putty website https://www.milliput.com/ Yorkshire Grit http://yorkshire-grit.com/ Disclaimer Woodturning is potentially dangerous! My videos are designed to give viewers creative ideas. The way I work is not necessarily the best or safest way to work! Your safety is your own responsibility not mine. Please follow all safety procedures and wear personal protective equipment. Wear a visor and a respirator dust mask at all times. Be safe, be creative and enjoy your turning.

 

10 Questions - Episode 63
By: Paul Lockwood
March 12, 2017 · 379 views

Here are my responses to the Woodturner's '10 Questions'. A few of us with small workshops started this idea of answering the most common questions asked of us and created a series for people to watch. The idea has grown and turners from around the World are having a go too. John Clothier of the Woodworking Shed https://www.youtube.com/channel/UC2hWlsf15z-7-smBhGdZvNg Stephen's 8x6 Workshop https://www.youtube.com/channel/UC8SLw_zYEappZL5rROwvZ1w Ian Maude https://www.youtube.com/channel/UCfuhB2-ceyo8rlTf867Rw_A I have nominated Dave Capepr-Sanden at Turning Works https://www.youtube.com/c

 

Crack questions and Lyle Jamison cutter
By: MARK Baid
March 11, 2017 · 309 views

Not sure why this piece is cracking/checking so fast. Plus check out Lyle's cutters they are awesome.

 

Wood Turning - 10 Questions....Answered
By: Mike Waldt
March 09, 2017 · 6,330 views

I was kindly nominated by Stephen from the 8 x 6 workshop to answer 10 questions commonly asked of turners. Stephen's YouTube Channel : https://www.youtube.com/channel/UC8SLw_zYEappZL5rROwvZ1w 10 questions playlist 10 Questions: http://www.youtube.com/playlist?list PLGWHuGuchXJyN4uo4HdrqmTC9zOXYNJ18 UKIWS: http://www.ukiws.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk

 

Flatland Wood Turners presents - Brad Sanders - Tips and Tricks
By: Flatland Woodturners
February 24, 2017 · 2,353 views

At each of our monthly meetings, a member does a demonstration. This month, Flatland Wood Turners member, Brad Sanders, shows off some tips and tricks that he uses in his wood shop.

 

# 265 Update on stuff
By: Cap'n Eddie Castelin
February 23, 2017 · 16,955 views

Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at capneddiecastelin@gmail.com or www.eddiecastelin.com

 

Woodturning 10 questions Challenge !!
By: Woodturning Live With Steve Twydell
February 17, 2017 · 817 views

I was nominated by Rob Summerlin from Woodslee Summercraft to answer 10 personal questions about myself and my hobby. This is a challenge that was set by a couple of YouTube makers to help find out a little more about your favourite makers. Thank you Rob for the nomination. Rob Summerlins channel Woodslee Summercraft :- https://www.youtube.com/channel/UCSTl-BQomeXoJqevZ_MxpOw Gary Lowe Channel :- https://www.youtube.com/channel/UCgdG-Vh5Uj2GNdVgnsDEMtA Jamie Page Channel JP Woodworks :- https://www.youtube.com/channel/UCw3hBDXx_L_EoSFqqmEuWJQ Ian Maude Youtube channel :- https://www.y

 

woodturning, ten questions and answers
By: Woodslee Summercraft
February 12, 2017 · 926 views

Thank you Bram for nominating me to answer ten questions about me and woodturning, I hope that they are of some interest to you all. please visit my website http://www.woodsleesummercraft.ca/ Bram https://www.youtube.com/channel/UCEHcSv7-eoRVkyyksXsnrBA Keith https://www.youtube.com/channel/UC1xj8Lp_fmCX0GXr208rP9w Ian https://www.youtube.com/user/maudeij John https://www.youtube.com/channel/UC2hWlsf15z-7-smBhGdZvNg Steve https://www.youtube.com/channel/UCM0Ui4ri5LLJvopaMT-SR5w

 

Woodturning at 54a. 10 questions
By: Keith Barrow
February 08, 2017 · 3,744 views

I am honoured to be nominated for the 10 questions video! After watching Ian Maudes--https://youtu.be/nqzD0m74e5Q and John Clothiers--https://youtu.be/UTZ1Mf7yN4s I hope my answers will be half as good! Please check out my new website!! http://www.spanglefish.com/woodturningat54a

 

10 Questions
By: Ian Maude
February 05, 2017 · 1,423 views

John Clothier, The Woodworking Shed - https://www.youtube.com/channel/UC2hWlsf15z-7-smBhGdZvNg/videos Stephen's 8x6 Workshop - https://www.youtube.com/channel/UC8SLw_zYEappZL5rROwvZ1w/videos Paul Lockwood - https://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w/videos Glenn Teagle - http://www.ukwoodcraftandcarbidechisels.co.uk Hampshire Sheen - http://www.hampshiresheen.com Yorkshire Grit - http://yorkshire-grit.com

 

Moment of Peace #11 - Wood Turning
By: Mike Peace Woodturning
February 01, 2017 · 1,538 views

I answer questions on woodturning on a lathe, provide turning tips and share wood turning information. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Blow water out of wood pores
By: Lyle Jamieson
January 31, 2017 · 1,439 views

Another Tuesday tip video. See the 'maple syrup' in the wood. I always use wet wood. My business Facebook page https://www.facebook.com/lylejamieson46 is the place to go for your questions. I always have an opinion.

 

Move cutter position for small entry hole hollowing
By: Lyle Jamieson
January 24, 2017 · 1,092 views

Tuesdays Tip video is a new feature I started on my Facebook Business page. https://www.facebook.com/lylejamieson46/ Short, quick techniques that will help advance your turning skills. Lyle Jamieson

 

Tuesdays tip, start on the balance point
By: Lyle Jamieson
January 17, 2017 · 1,753 views

Tuesdays Tip video is a new feature I started on my Facebook Business page. https://www.facebook.com/lylejamieson46/ Short, quick techniques that will help advance your turning skills.

 

Wood Turning - How to prevent your Gouge from performing like an Olympic skater!
By: Mike Waldt
January 07, 2017 · 34,009 views

A couple of ways to prevent 'gouge skate' Templeboy Turnings: https://www.youtube.com/watch?v HJLeUWghvyE Facebook Make It Matter: https://www.facebook.com/makersmakeitmatter/ Woodchuckers: https://www.facebook.com/groups/harri.woodchuckers/ UKIWS: http://www.ukiws.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk

 

Questions, Comments, and Clarifications: December 2016 with Sam Angelo
By: WYOMINGWOODTURNER
January 07, 2017 · 3,184 views

As 2016 comes to an end I would like to answer a few questions and add a bit of clarification on a few turning issues. My wish for 2017 is it to be happy and prosperous for us all. Sam AAW Website http://www.woodturner.org

 

Wood Turning - How to turn a perfect cylinder...well almost perfect!
By: Mike Waldt
December 28, 2016 · 11,687 views

This video shows my techniques for achieving a near perfect cylinder on the lathe. Woodchuckers: https://www.facebook.com/groups/harri.woodchuckers/ UKIWS: http://www.ukiws.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk

 

Moment of Peace #10
By: Mike Peace Woodturning
December 05, 2016 · 1,473 views

I respond to some viewer comments, provides a couple of wood turning tips and talk about coping with vision changes from cataract surgery. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Moment of Peace #9
By: Mike Peace Woodturning
October 31, 2016 · 1,309 views

Mike responds to comments and questions, offers a tip or two and just talks about woodturning stuff without necessarily turning on the lathe. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Talking Turning & Tea - recent projects, UKIWS 2017, exciting news
By: Blind Woodturner
October 29, 2016 · 512 views

Some recent projects, a shout out for UKIWS 2017 and some exciting news! *** Join me, Chris Fisher, the Blind Wood Turner, in my workshop. I started out in life as a regular guy, working in auto body repair at BMW, until one day, completely out of the blue, a rare virus (Toxoplasmosis) reared its ugly head and caused me to lose my sight in a matter of weeks. Despite the challenges of coming to terms with losing my sight, I refused to give up and, after four years I decided to take up woodturning so that I could make myself a vampire stake – I’m a huge horror film fan! While every day is s

 

10 Tips for Woodturned Ornaments - After the turning
By: Mike Peace Woodturning
October 28, 2016 · 4,270 views

I show lots of tips and tricks for wood turned ornaments dealing with Hangers, Ribbon, Signing, Details that matter, Finishing, Packing, and Ornaments Stands. Little details can add value to your woodturnings. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3/ Source for screw eyes http://ptreeusa.com

 

COMMENTS and Questions OCT 2016 Sam Angelo, wyomingwoodturner
By: WYOMINGWOODTURNER
October 17, 2016 · 2,835 views

Sam answers questions from viewers dealing with buffing, wearing a respirator with a beard, and coloring a hollow form. He also discusses a 'support button' he added to his YT channel. Display Turntable link: https://www.amazon.com/Display-Revolving-Mirrored-Lighted-Changing/dp/B004VN02EQ/ref sr_1_6?ie UTF8&qid 1476746221&sr 8-6&keywords battery operated turntables

 

Turning Air! What Could Go Wrong?
By: Carl Jacobson
October 11, 2016 · 69,115 views

I wasn't planning on filming this piece. After shaping the outside there were so many things that could go wrong, I had to turn the camera on. Only one small piece flew off while turning it, so I'm really happy it all worked out in the end. I put together a list of some of the tools I use in my shop (affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link: https://www.amazon.com/shop/thewoodshoptv I'm a Robust dealer if you have any questions I'd be more than happy to help. Robust Woodturning Tools-http://www.turnrobust.com/ Easy Wood Tools-http:

 

Moment of Peace #8
By: Mike Peace Woodturning
September 27, 2016 · 1,521 views

Mike Peace responds to comments on his recent woodturning videos and shares thoughts on additional woodturning related matters. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Wood Turning - The Black Dog Workshop, Carter & Sons Tools, and Cambridge Mask
By: Mike Waldt
September 19, 2016 · 5,652 views

The Black Dog Workshop Facebook - https://www.facebook.com/blackdogworkshopuk/ YouTube - https://www.youtube.com/channel/UC8RiD8a0FZGzvGIcM8SPkwg The Tool Post - http://www.toolpost.co.uk/pages/Dummy/CarterToolworks/cartertoolworks.html Cambridge Mask - http://www.cambridgemask.com

 

Le PicBois - Fail #5: No Face Shield? No Problem!
By: Pat Lap - Le PicBois
September 11, 2016 · 2,631 views

[ I know, I know. I need to wear my face shield... ] Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois Special Thanks: Easy Wood Tools: https://www.youtube.com/user/EasyWoodTools Carl Jacobson: https://www.youtube.com/user/haydenHD Jean-Gabriel Pothier: https://www.youtube.com/user/JGABPOTHIER I work for free and I pay my director with cookies… Please help me to buy some flour by clicking on the link below: https://www.paypal.com/us/cgi-bin/webscr?cmd _flow&SESSION Eqxer72hzstD4emcu5OgZQyXm9I2ypT2k-PiYKNyeyKlNpjGC7vCQoHglh8&dispatch 5885d80a13c0db1f8e263663d3faee8d96f000117187ac9edec8a65b311f447e

 

Carbide Tools vs Gouges - Power Sanding - Back-to-Basic Woodturning
By: Carl Jacobson
August 26, 2016 · 76,679 views

Sanding your projects on the lathe is the quickest way to finish your project. One way to sand quickly is with a power sander. You can use a simple sanding pad chucked into a drill. You can also use a random orbit sander that is purpose-built for lathe work — they typically include smaller, softer pads than sanders built for flat work, and some (like the air-driven sander I use from Woodturners Wonders) also include extensions to help reach inside bowls and other vessels. These types of surfaces aren’t typically encountered on flat work, so the purpose-made sander helps a lot. Random orbit s

 

Woodturning Q&A New Shirt........LOL
By: The Woodshop
August 15, 2016 · 1,467 views

This is the Follow-up for the kitchen utensil video I did friday. These are great skill builders.They help you get comfortable with the tools, and don't take very long to complete. Tools I used in the video- Ruth Niles Mandrel-http://astore.amazon.com/thewood0c-20... Utensil kits-http://www.chefwarekits.com/carl-jaco... Spindle Gouge-http://astore.amazon.com/thewood0c-20... Parting Tool-http://astore.amazon.com/thewood0c-20... Roughing Gouge-http://astore.amazon.com/thewood0c-20... Pat Lap https://www.youtube.com/channel/UCcM_SykaFqrxVnq52MjI6UA/featured Jim Overton https://www.youtube.com/c

 

Woodturning - various tips for the shop
By: Marc 's Oneway of turning
August 14, 2016 · 8,046 views

I hope you will find something useful for you. Thanks for watching.

 

Woodturning Jellyfish Follow-up
By: The Woodshop
August 08, 2016 · 1,430 views

Jellyfish video https://www.youtube.com/watch?v fxkDHwoH5dE Yin Yang templates mike@simplyamazingwood.com http://simplyamazingwood.com/ David's YT Channel https://www.youtube.com/channel/UCpFp4Xo5-h0Zx0DG1-x6f8A Nick's YT Channel https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA/featured I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.

 

Around The Shop - Episode 3 - Questions I Get Asked All The Time
By: RJBWoodTurner
August 07, 2016 · 2,297 views

I get asked all the time why pen parts don't line up and why parts are loose. Here's what I found that corrects that issue in my shop. Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Moment of Peace #7
By: Mike Peace Woodturning
August 05, 2016 · 1,304 views

Mike talks about woodturning and responds to comments on recent videos. He polls viewers on woodturning level interest they have. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://www.mikepeacewoodturning.com/resources-3

 

Eva, Sofia, and Grace help with a Q & A wyomingwoodturner
By: WYOMINGWOODTURNER
July 29, 2016 · 2,215 views

During a 2 week visit to Wyoming my granddaughters helped with a question and answer session. But I am not sure where they got some of the questions.

 

#260 out of commission
By: Cap'n Eddie Castelin
July 04, 2016 · 40,323 views

Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at capneddiecastelin@gmail.com or www.eddiecastelin.com

 

#257 - stuff in the shop
By: Cap'n Eddie Castelin
June 30, 2016 · 9,099 views

Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at capneddiecastelin@gmail.com or www.eddiecastelin.com

 

Moment of Peace #6
By: Mike Peace Woodturning
June 21, 2016 · 1,380 views

Mike responds to viewer questions and comments on his woodturning tutorials and solicits your opinion on music on his fast forward scenes. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on http://www.mikepeacewoodturning.com/resources-3/.

 

Wood Turning - How to Drill a Depth Hole
By: Mike Waldt
June 05, 2016 · 16,078 views

I show the various methods that I use to drill a depth hole on a piece Lyle Jamieson's video: https://www.youtube.com/watch?v eOVnB2gnHxg book your UKIWS entry tickets here :- http://www.ukiws.co.uk/tc-events/ukiws/ Like our Facebook page to be able to keep up with the updates !! click here :- https://www.facebook.com/ukiws/?ref b... Book your tickets now, this is an event not to be missed !!!

 

Spindle Height
By: Ron Calverley
May 31, 2016 · 176 views

How high is the spindle from the floor?

 

Moment of Peace #5
By: Mike Peace Woodturning
May 28, 2016 · 1,858 views

How to tie a bandana to keep the chips out of your hair, AAW and UKIWS Symposium reminders and Memorial Day remembrances. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my blog MikePeaceWoodturning.blogspot.com.

 

Turning Tips, Tricks and Jigs - Episide 3
By: Mike Peace Woodturning
May 02, 2016 · 9,970 views

Every woodturner should find something useful in these nifty woodturning tips trick and jigs in this third episode. Click here to watch Turning Tips, Tricks and Jigs Episode 1 https://youtu.be/0wYXLLGwra4 Click here to watch Turning Tips, Tricks and Jigs Episode 2 https://youtu.be/k-cXboUEU_U Filmed and uploaded in HD Check out http://www.mikepeacewoodturning.com/resources-3/ for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers YouTube channel.

 

Your Questions, My Comments Sam Angelo woodturning
By: WYOMINGWOODTURNER
April 30, 2016 · 3,903 views

Sam answers some questions, makes comments, and offers some good safety information regarding face shields.

 

Computer Tips for Woodturners
By: Mike Peace Woodturning
April 26, 2016 · 1,344 views

I explain some computer tricks for finding, resizing and using jpeg images for your woodturning. A woodturner can use these techniques to apply images like leaves, butterflies, or what have you to the surface of a turning for tracing over or woodburning. Filmed and uploaded in HD Check out http://www.mikepeacewoodturning.com/resources-3/ for demonstration handouts, downloadable copies of articles I have published

 

Moment of Peace #4
By: Mike Peace Woodturning
April 20, 2016 · 1,324 views

Response to comments and questions from my recent woodturning videos and a few shared pictures from viewers. Filmed and uploaded in HD Check out http://www.mikepeacewoodturning.com/resources-3/ for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers YouTube channel.

 

Brian Hart Discusses and Demonstrates Multiple Techniques
By: IKI Woodturners
April 15, 2016 · 230 views

April 10th IKI Wood Turners Meeting: Brian Hart Discusses and Demonstrates Multiple Techniques I wanted to make this video shorter but there was so much interaction with the audience and so much information being exchanged that I opted to leave it full length.

 

Outboard Turning Tip
By: BMac Woodturning
April 06, 2016 · 2,032 views

Just a wee tip to help stop breaking your extension or banjo.

 

Comments and Questions: woodturning with Sam Angelo
By: WYOMINGWOODTURNER
March 25, 2016 · 3,534 views

Sam addresses a few comments and questions about drying wood, safety issues, and tools. He also does a shout out to Adze Woodworking and to Jodi Bennett a local pyrography artist.

 

Radio Knob Follow Up Great Tip Thank You's What Am I Working On
By: RJBWoodTurner
March 24, 2016 · 1,595 views

This is a quick update on my most recent project. I also want to pass along an amazing tip, give out some Thank You’s and fill everyone in on what I’m working on. Regards, Bob Peter Matthew: https://www.youtube.com/channel/UCMCVIk6zuSQNsbhdcPhfiBA Rockler: www.rockler.com Herringbone Video: https://www.youtube.com/watch?v ixDgzvVroqw

 

Blast away bowl turning!
By: Steve Krumanaker
March 20, 2016 · 10,111 views

Cleaning worm tracks with an inexpensive sand blasting gun and baking soda.

 

ASTUCE N 1 : Le liseré noir
By: J'M Le Bois
March 10, 2016 · 4,285 views

Bonjour à toutes et a tous , aujourd’hui une nouvelle vidéo sur une astuce cette fois ci . J'espère qu'elle vous plaira , si c'est le cas n'oubliez pas de laisser un pouce bleu et de vous abonnez pour suivre toutes mes prochaines vidéos ;) Lien pour les dons : https://www.paypal.com/fr/cgi-bin/webscr?cmd _flow&SESSION QP3UcMl9FGBLy_jwfeZpBQLaysT0aMCDtYh0qN11ck_aCU1kVFi7k0na6Dy&dispatch 5885d80a13c0db1f8e263663d3faee8dcce3e160f5b9538489e17951d2c62172 Ma Page Tipeee : https://www.tipeee.com/j-m-le-bois

 

Casting resin fix Quick tip
By: Rich McNatt
March 09, 2016 · 860 views

how to get out a casting that sucks.

 

#5 Hablemos de torneado: Aceite y cera
By: Miguel Sanchez Woodworks
March 05, 2016 · 9,563 views

Canal principal con Proyectos cada Martes: Main channel with new projects every Tuesday: https://www.youtube.com/user/Drizztss Matthias Wandell: https://www.youtube.com/watch?v XCt3LooUVsQ Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez www.tornoartesano.es miguel@tornoartesano.es

 

#3 Lets talk about woodturning, finishes, tips and tricks, news
By: Miguel Sanchez Woodworks
February 19, 2016 · 710 views

Canal principal con Proyectos cada Martes: Main channel with new projects every Tuesday: https://www.youtube.com/user/Drizztss Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez www.tornoartesano.es miguel@tornoartesano.es

 

Moment of Peace #3
By: Mike Peace Woodturning
February 13, 2016 · 1,631 views

Another short woodturning moment with a tip, an answered question and work from a subscriber. Filmed and uploaded in HD Check out my blog MikePeaceWoodturning.blogspot.com for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers YouTube channel.

 

#2 Lets talk about woodturning, finishes, tips and tricks, news
By: Miguel Sanchez Woodworks
February 12, 2016 · 526 views

Canal principal con Proyectos cada Martes: Main channel with new projects every Tuesday: https://www.youtube.com/user/Drizztss Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez www.tornoartesano.es miguel@tornoartesano.es Pasta abrasiva: https://www.youtube.com/watch?v JIiQJVLLbvk Glen Lucas: https://www.youtube.com/watch?v 7NaBnaMnLJI&spfreload 10

 

A Few Segmenting Tips
By: Carl Jacobson
January 25, 2016 · 10,992 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg This was my first segmented piece, and I learned a few tip that might help you. Yuval Lahav https://www.youtube.com/user/yuvallahav Woodturner Pro http://woodturnerpro.com/ Segmented turnings http://www.segmentedturning.com/ I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy

 

Moment of Peace #2
By: Mike Peace Woodturning
January 13, 2016 · 3,099 views

Woodturner Mike Peace shows what he wears when woodturning and invites you to share your thoughts as to what you like to wear when turning and why. He also shares some pictures of viewers work. Filmed and uploaded in HD Check out my blog for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers channel. MikePeaceWoodturning.blogspot.com

 

Craft Show Tips and a Thank You
By: SP Wood Art
December 29, 2015 · 8,182 views

This video briefly explains some tips and information about craft shows obtained from my recent experiences. I'd also like to thank my supporters and subscribers.

 

#252 finishing touches
By: Eddie Castelin
December 25, 2015 · 265 views

Responses to phone calls I receive weekly

 

#252 finishing touches
By: Eddie Castelin
December 24, 2015 · 245 views

Responses to phone calls I receive weekly

 

How to search a YouTube channel for Woodturning videos
By: WYOMINGWOODTURNER
December 14, 2015 · 2,813 views

Sam shows how to search a YouTube channel for a particular video. Once on the home page of a channel, this short video shows where and how to do that search.

 

Lets talk about woodturning #35
By: Miguel Sanchez
November 23, 2015 · 918 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado #35
By: Miguel Sanchez
November 23, 2015 · 3,905 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

FINDING the Center of a Turning Blank (woodturning)
By: WYOMINGWOODTURNER
October 28, 2015 · 8,723 views

Sam shows some old woodworking methods for finding the center line on a turning blank.

 

Woodturning Tips and Tricks
By: DentonTurners
October 12, 2015 · 26,593 views

This is our club's annual Tips and Tricks presentation. Each year we invite our members to come up and share their own tips, tricks, and gadgets for wood turning to the club. We hope you enjoy this and pick up a few new ideas. This was recorded at the October 2015 club meeting of the Golden Triangle Woodturners in Denton, Texas. We meet on the first Monday of each month at 7pm in the Center for the Visual Arts located at Hickory and Bell streets in Denton, Texas. All are welcome. http://www.goldentrianglewoodturners.org

 

Shop Tips
By: RJBWoodTurner
September 28, 2015 · 3,363 views

I was making some pens the other day and was using some techniques that I use often for removing C/A from the ends of blanks and for cleaning up excess brass protruding from a tube. I realized that I get asked frequently how I solve these issues and thought I would film them and share what I do with you. I was also working with a punky piece of spalted maple and wanted to share what I do to reduce tear out while barrel trimming. I hope you information this information useful. Regards, Bob

 

Woodturning Q&A Spur Center
By: The Woodshop
September 19, 2015 · 7,188 views

I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.com/ ChefwareKits https://www.chefwarekits.com/?trackin... Website http://www.thewoodshop.tv/ Google https://plus.google.com/1131999045658... Facebook https://www.facebook.com/pages/The-Wo... Welcome to my channel, I started woodworking with my grandfather as a young boy. I continued woodworking through high school, and started woodturning after seeing a turned project in a friends shop. Shortly after YouTube started, I was looking for a howto video for duck calls, with no results I decided to make my own video. Some of my fondest memories are working with my grandfather in his wood shop. Being able to share our passion for woodworking, ties it all together.

 

#243 ShopTips
By: Eddie Castelin
August 30, 2015 · 255 views

This video is about shop tips

 

Lets talk about woodturning 34
By: Miguel Sanchez
August 07, 2015 · 1,825 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Bruno Gausa: https://www.youtube.com/watch?v Mh7qTIuoexM Yuval Lahav: https://www.youtube.com/watch?v _YLxgmOJ_nw Guy Bradbury: https://www.youtube.com/watch?v A9IPsnX_n-g http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 34
By: Miguel Sanchez
August 07, 2015 · 4,799 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Bruno Gausa: https://www.youtube.com/watch?v Mh7qTIuoexM Yuval Lahav: https://www.youtube.com/watch?v _YLxgmOJ_nw Guy Bradbury: https://www.youtube.com/watch?v A9IPsnX_n-g http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Lets talk about woodturning 33
By: Miguel Sanchez
August 01, 2015 · 867 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Barbara Dill Creates: https://www.youtube.com/watch?v wdwSfQmw8sY Mike Waldt, Emerging Bowl: https://www.youtube.com/watch?v ekH57icxrJM Kevin Felderhof: https://www.youtube.com/watch?v wneg8OHTMA4 http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 33
By: Miguel Sanchez
August 01, 2015 · 2,910 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Barbara Dill Creates: https://www.youtube.com/watch?v wdwSfQmw8sY Mike Waldt, Emerging Bowl: https://www.youtube.com/watch?v ekH57icxrJM Kevin Felderhof: https://www.youtube.com/watch?v wneg8OHTMA4 http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado - 32 - Espaà ol
By: Miguel Sanchez
July 24, 2015 · 2,749 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Jason Hunt: https://www.youtube.com/watch?v nBGaFR5ZxuE Dipa Das: https://www.youtube.com/watch?v jVOo2PADWOA Robbiethewoodturner: https://www.youtube.com/watch?v GXRLOeGTkIU http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Lets talk about woodturning 32 - English
By: Miguel Sanchez
July 24, 2015 · 808 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Jason Hunt: https://www.youtube.com/watch?v nBGaFR5ZxuE Dipa Das: https://www.youtube.com/watch?v jVOo2PADWOA Robbiethewoodturner: https://www.youtube.com/watch?v GXRLOeGTkIU http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Bowl bottom thickness measurement tip
By: Jim Meier
July 18, 2015 · 1,291 views

An easy method to check the bottom thickness of your bowl on a lathe using a simple adjustable square.

 

Lets talk about woodturning 31
By: Miguel Sanchez
July 17, 2015 · 892 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Tiroler Dreschler: https://www.youtube.com/watch?v 8j-amDzyMP0 KRTWood: https://www.youtube.com/watch?v H64hKNMji8A MarkerBuoy: https://www.youtube.com/watch?v IoRrwLt5GsE http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 31
By: Miguel Sanchez
July 17, 2015 · 2,682 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Tiroler Dreschler: https://www.youtube.com/watch?v 8j-amDzyMP0 KRTWood: https://www.youtube.com/watch?v H64hKNMji8A MarkerBuoy: https://www.youtube.com/watch?v IoRrwLt5GsE http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Lets talk about woodturnig 30
By: Miguel Sanchez
July 10, 2015 · 854 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Diresta Spikes house: https://www.youtube.com/watch?v wPttGrLqi0g ASwoodturns, Scoop: https://www.youtube.com/watch?v r_aTc-9eFIE Petr Kiska: https://www.youtube.com/watch?v VsPfzbH3tzA http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 30
By: Miguel Sanchez
July 10, 2015 · 2,426 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Casa para Spike: https://www.youtube.com/watch?v wPttGrLqi0g ASwoodturns, Scoop: https://www.youtube.com/watch?v r_aTc-9eFIE Petr Kiska: https://www.youtube.com/watch?v VsPfzbH3tzA http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Lets talk about woodturning 29
By: Miguel Sanchez
July 02, 2015 · 1,255 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Tom Lohman: https://www.youtube.com/watch?v IG_USaEc_zA Carl Jacobson, Old Phone: https://www.youtube.com/watch?v bkJf_yjIjPo Daniel Vilariño: https://www.youtube.com/watch?v 6bPos6zofIo http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 29
By: Miguel Sanchez
July 02, 2015 · 3,006 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Tom Lohman: https://www.youtube.com/watch?v IG_USaEc_zA Carl Jacobson, Old Phone: https://www.youtube.com/watch?v bkJf_yjIjPo Daniel Vilariño: https://www.youtube.com/watch?v X0KnTarKuWc Cnc Ric Art: https://www.youtube.com/channel/UCOwJ19EwqEqK1fnUqAPywTg http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 28
By: Miguel Sanchez
June 26, 2015 · 3,720 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Larry Marley: https://www.facebook.com/MarleyTurned/videos/865332870172533/ Tabla corta queso: https://www.youtube.com/watch?v xkIYe8qRaFc Cyrus Filmore: https://www.youtube.com/watch?v rsk8yi0S_WI http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

SPSW 071 Ray Key's Tips
By: SPSW Video Library
June 21, 2015 · 2,948 views

Ray Key discusses tips for woodturners

 

Hablemos de torneado 27 - Lets talk about woodturning 27
By: Miguel Sanchez
June 19, 2015 · 3,569 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Segmented Bowl Factory: https://www.youtube.com/watch?v C4P3gYMvAoM Expositor de pendientes: https://www.youtube.com/watch?v 8mu-nbgguQs Cyrus Filmore: https://www.youtube.com/watch?v q4URDzhpCs4 http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 26 - lets talk about woodturning 26
By: Miguel Sanchez
June 06, 2015 · 3,959 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez scrap wood project: https://www.youtube.com/watch?v M9upLrT1Dik Adam Luna, estabilizando madera: https://www.youtube.com/watch?v y2a2cdyhi5g Peter Brown, Anillo de lapices de colores: https://www.youtube.com/watch?v xPAK_jR-RKI http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos 25
By: Miguel Sanchez
May 29, 2015 · 3,553 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Lijadora por friccion: https://www.youtube.com/watch?v myBwALrpYeM http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 24 - Lets talk about woodturning 24
By: Miguel Sanchez
May 22, 2015 · 3,842 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Thomas Anton Geurts, Tumbling bowl: https://www.youtube.com/watch?v BAe2kIVJ0QI Cuenco simulando muro de piedra: https://www.youtube.com/watch?v qrbxsQTs4Ko Afilado de barritas hss a 60 grados: https://www.youtube.com/watch?v GSBEtPjAX28 Barritas de acero: http://www.ebay.com/itm/311073148440?_trksid p2060353.m2749.l2649&ssPageName STRK%3AMEBIDX%3AIT http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 23 - Lets talk about woodturning 23
By: Miguel Sanchez
May 15, 2015 · 4,057 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Adorno navideño miniatura: https://www.youtube.com/watch?v udCEeOfs7i8 Steven Kennard: https://www.youtube.com/watch?v JNPiDpP0xxI Peter Brown: https://www.youtube.com/watch?v gC_DjrJXXMY http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Shop Talk 1
By: Paul Crabtree
May 13, 2015 · 305 views

Discussion using different size tools when it is not absolutely necessary. A look at King V and two Black Oak Vases.

 

More Miscellaneous Tips by Reed Gray aka Robo Hippy
By: robohippy
May 11, 2015 · 13,288 views

Miscellaneous bowl turning tips that will help you become a better wood turner. Visit my website for more info on my life as a wood turner www.robohippy.net

 

Hablemos de torneado 22 - Lets talk about woodturning 22
By: Miguel Sanchez
May 08, 2015 · 4,248 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Brendan Stemp: https://www.youtube.com/watch?v 9-81Cwk9lPg Derek Weidman: https://www.youtube.com/watch?v o9W8_nt307Q Steve Paoli: https://www.youtube.com/watch?v ydDQQQww1AA http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 21 - Lets talk about woodturning 21
By: Miguel Sanchez
May 01, 2015 · 3,523 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Rikki Berger, Pantalla de lampara: https://www.youtube.com/watch?v LgsDWb0orSQ Torno antiguo, The leura Bodger: https://www.youtube.com/watch?v 7WX6QsRX4aA Marius Hornberger, Cuenco con borde de letras: https://www.youtube.com/watch?v jVWJOE5BkMM http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 20 - CBN Wheels
By: Miguel Sanchez
April 24, 2015 · 11,613 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez La goma laca: https://www.youtube.com/watch?v H9yLZgBTlw0 Dipa Das: https://www.youtube.com/watch?v d1QNfIfTWB8 Silvio Bustamante, Esferas: https://www.youtube.com/watch?v YXmgdGYPQRw http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 19 - Lets talk about woodturning 19
By: Miguel Sanchez
April 17, 2015 · 3,708 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Glen Lucas: https://www.youtube.com/watch?v IwraapjJq3U Tiroler Dreschler: https://www.youtube.com/watch?v X2_4bMtj8qs Albert Furtado: https://www.youtube.com/watch?v islYtPZ8ouk http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 18 - Lets talk about woodturning 18
By: Miguel Sanchez
April 10, 2015 · 4,028 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Videos de esta semana: Torneando figuras de madera, con Eli Torres: https://www.youtube.com/watch?v jxr8BHm8OkA Taza termo segmentada: https://www.youtube.com/watch?v g_1jUWdTUkg Doucette and Wolfe fine furniture: https://www.youtube.com/watch?v ACww03hHNaY http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 17 - Lets talk about woodturning 17
By: Miguel Sanchez
April 03, 2015 · 3,651 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez El formon oblicuo con Mike Waldt: https://www.youtube.com/watch?v f8v-59KFMhg Muñecas Kokeshi: https://www.youtube.com/watch?v NfPapG4EnPg Automontaje de sierra de mesa con Frank Howart: https://www.youtube.com/watch?v ViKmwhVMXpE http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 16 - Lets talk about woodturning 16
By: Miguel Sanchez
March 27, 2015 · 3,556 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Formon oblicuo con Mike Waldt: https://www.youtube.com/watch?v f8v-59KFMhg Torneado de cucharas con Victor Agudelo: https://www.youtube.com/watch?v b2devBVIF0s Plato de garras con Juan Manuel Mendez: https://www.youtube.com/watch?v G6Z-XYdPQ_g http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 15 - Lets talk about woodturning 15
By: Miguel Sanchez
March 13, 2015 · 3,677 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Silvio Carvalho: https://www.youtube.com/watch?v tlq3DdYgapU Torneado de Columna: https://www.youtube.com/watch?v xM32kvXaX0s Miniaturas, Eduardo Silva: https://www.youtube.com/watch?v JhFNANBvKmo http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 14 - Lets talk about woodturning 14
By: Miguel Sanchez
March 06, 2015 · 3,432 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Lulu Navarro, hojas de madera: https://www.youtube.com/watch?v cD4YGY4Djco Denis Edwards:https://www.youtube.com/user/edwardsx999/videos Kevin Felderhoff, wings vase: https://www.youtube.com/watch?v tLPbQkn9O0w http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 13 - Lets talk about woodturning 13
By: Miguel Sanchez
February 27, 2015 · 3,420 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Christopher Finkel: https://www.youtube.com/watch?v cM2etbjafkM Bolas tradicionales: https://www.youtube.com/watch?v dzQIUvNGgdE Flores: https://www.youtube.com/watch?v 4MFd8Bo67LY http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 12, Lets talk about woodturning 12
By: Miguel Sanchez
February 20, 2015 · 3,444 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Cip Mendes, Dovetail economy Bowl: https://www.youtube.com/watch?v VBAZjWlljLE Fool4peppers, Brazaletes: https://www.youtube.com/watch?v Hf-qCEv-EBg Uso de las indexaciones: https://www.youtube.com/watch?v YIVLvO0VGxg http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 11 - Lets talk about woodturning 11
By: Miguel Sanchez
February 13, 2015 · 3,622 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Secado de maderas: https://www.youtube.com/watch?v pGJWigrlbys Capt. Eddie: https://www.youtube.com/watch?v aKjDkDCqidg Jose Alberto Giordano: https://www.youtube.com/watch?v V0LGH0Xy8_w http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 10 - Lets talk about woodturning 10
By: Miguel Sanchez
February 06, 2015 · 3,384 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez El formon oblicuo, Jake Gevorgian: https://www.youtube.com/watch?v lOELuHLk98E Robbie the Woodturner: https://www.youtube.com/watch?v IcnPjNFdLX4 Toninho: https://www.youtube.com/watch?v g7_DLjoNPTE http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Naked Turner Student Turner
By: Erik Anderson
January 31, 2015 · 1,294 views

I help a young turner with a problem he had been having.

 

hablemos de torneado 9 - Lets talk about woodturning 9
By: Miguel Sanchez
January 30, 2015 · 3,460 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez David Elsworth: https://www.youtube.com/watch?v sXgxzRAJ9a8 Peter Brown, Zoetrope: https://www.youtube.com/watch?v sULoZyqm_lI Chris Fisher: https://www.youtube.com/watch?v OkwYbSYcNh4 http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Woodturning Q&A
By: The Woodshop
January 24, 2015 · 3,057 views

This is our first live show, and I want to thank everyone for joining in. We went over basic tool techniques, and turned a handle for my file. Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

Hablemos de torneado 8 - Lets talk about woodturning 8
By: Miguel Sanchez
January 24, 2015 · 4,020 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Canales recomendados esta semana. Adam Luna Ustream: http://www.ustream.tv/channel/woodturningwood Amigos por el torno, facebook: https://www.facebook.com/groups/718755628164310/?fref ts Daniel Vilariño: https://www.youtube.com/watch?v 9q_POJ1J_nM Mauricio Kolenc woodturning. Youtube: https://www.youtube.com/watch?v Cyr4teq0fyM Facebook: https://www.facebook.com/MauricioKolenc?fref ts Arboles de virutas: https://www.youtube.com/watch?v 1yWmqbltB-c http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 7 - Lets talk about woodturning 7
By: Miguel Sanchez
January 16, 2015 · 3,794 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Reloj de Carl Jacobson: https://www.youtube.com/watch?v rNElBDs-eKo Portavelas de Tiroler Dreschler: https://www.youtube.com/watch?v qGPZXKIZttc Gubia de Capoteandoeltemporal: https://www.youtube.com/watch?v qBwvCtz1mUM http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 6 - Lets talk about woodturning 6
By: Miguel Sanchez
January 09, 2015 · 3,676 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Repaso semanal al proyecto que hemos hecho el martes y enlaces a cosas interesantes.. Andy Cole, estractor de cuencos: https://www.youtube.com/watch?v UeGbDYU6Cgs Torno de arco: https://www.youtube.com/watch?v wnv0DAR_gWA Stuart Mortimer, monster bowl: https://www.youtube.com/watch?v ZNHVeCUQxeY http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Turning Tips, Tricks and Jigs Pt 2
By: Mike Peace Woodturning
January 03, 2015 · 15,537 views

Mike Peace shares more woodturning tips, tricks and jigs he has picked up over the years. Part 1 of this series is available here: https://www.youtube.com/watch?v 0wYXLLGwra4

 

Hablemos de torneado 5 - Lets talk about woodturning 5
By: Miguel Sanchez
January 02, 2015 · 4,281 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Carlos Esquivel: https://www.youtube.com/watch?v j_GBfOZC_K4 Pierino Traverso: https://www.youtube.com/watch?v jbf8DAWrn9Q Oaksho, boligrafo de caramelo: https://www.youtube.com/watch?v T2ikqPBwvkQ http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 4 - Lets talk about woodturning 4
By: Miguel Sanchez
December 26, 2014 · 4,078 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Victor Agudelo:https://www.youtube.com/user/victoracheagos Jimmy Diresta: https://www.youtube.com/channel/UCiEk4xHBbz0hZNIBBpowdYQ http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Turning Tips, Tricks and Jigs
By: Mike Peace Woodturning
December 22, 2014 · 69,192 views

Mike Peace reveals a variety of woodturning tips, jigs and tricks he has accumulated since he started wood turning. Several of these woodturning tips Mike has had published in American Woodturner, the journal of the American Association of Woodturners. Part 2 is available here: https://www.youtube.com/watch?v k-cXboUEU_U

 

Hablemos de torneado 3 - Lets talk about woodturning 3
By: Miguel Sanchez
December 19, 2014 · 4,695 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Daniel Vilariño: https://www.youtube.com/watch?v OEZD-ga-DIs Stephen Ogle: https://www.youtube.com/watch?v bux7RYx1Nnw Cip Mendes: https://www.youtube.com/watch?v qdoK1cV9o-o Kevin Krull: https://www.youtube.com/watch?v i_duhVaXKJI http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 2 - Lets talk about woodturning 2
By: Miguel Sanchez
December 12, 2014 · 4,822 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Segunda entrega, aqui teneis los enlaces Daniel Vilariño: https://www.youtube.com/watch?v 8NLh4J-AB0A&list UUGCSmdDMR468ONoBlLvDaAg Livio Maritati: https://www.youtube.com/watch?v adgB1z-hGVQ&list UU4pzMDZHATqUm5BhJnjD2rw Texturas con Brendan Stemp: https://www.youtube.com/watch?v mS1UnRjmCFA&list UUYJ4e0XACGJQjJvfmVUcE-Q http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Hablemos de torneado 1 Lets talk about woodturning 1
By: Miguel Sanchez
December 05, 2014 · 6,767 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Nueva seccion, hablemos de torneado, espero que os guste. Enlaces: Adornos navideños: https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Canal dePeter Brown: https://www.youtube.com/user/kludge1977 Sable de luz: https://www.youtube.com/watch?v 8x7789Aw8lA Canal de Mario: https://www.youtube.com/channel/UCLdOc9rg5MT2TCxbWLHBzZw Frank Howart: https://www.youtube.com/watch?v fDX8feKjafI http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#09 Quick Tip - Coffee Inlay - Wood Work - Acolyte Turner
By: Tom Stratton
October 10, 2014 · 8,495 views

#09 Quick Tip - Coffee Inlay - I show you how to use old coffee grounds as an inlay / filler for wooden projects. Previous video: http://youtu.be/Ge-vjfr_9Sc Mention of trade names or commercial products does not constitute endorsement by The Acolyte Turner (Tom Stratton) except where explicitly stated. All brand and product names are trademarks or registered trademarks of their respective companies and are hereby acknowledged. Music courtesy of Google / YouTube Audio Library CHANNEL TAGS Acolyte Turner, Wood Turning, Turning, Project, Ossett, West Yorkshire, UK, Nova, Record Power, DVR XP, BS350, Lathe, Bandsaw, Sanding, Sandpaper, Ruth Niles, Off Centre Jig, Off Center Jig, help, tips, training, learning, how to, Hollow Form Elm Pot Pourri Pot Pourri Holder Carbide Carbide Tools Carbide Turning Tools

 

#07 Quick Tip - No Glue Here! - Wood Turning - Acolyte Turner
By: Tom Stratton
October 03, 2014 · 1,559 views

#07 Quick Tip - A video showing a simple method available to all wood workers of preventing CA glue from sticking in unwanted areas! Previous video: http://youtu.be/5p-VzveR6T8 Further projects, turnings and information can be found at http://tomturns.com CHANNEL TAGS Acolyte Turner, Wood Turning, Turning, Project, Ossett, West Yorkshire, UK, Nova, Record Power, DVR XP, BS350, Lathe, Bandsaw, Sanding, Sandpaper, Ruth Niles, Off Centre Jig, Off Center Jig, help, tips, training, learning, how to, Hollow Form Elm Pot Pourri Pot Pourri Holder Carbide Carbide Tools Carbide Turning Tools

 

#04 Quick Tip - Centring a Faceplate - Wood Turning - Acolyte Turner
By: Tom Stratton
September 23, 2014 · 2,988 views

Video #04 A quick tip to help you centre and attach a faceplace to a project piece. Previous video: http://youtu.be/jFweLIEd_CU Further projects, turnings and information can be found at http://tomturns.com CHANNEL TAGS Acolyte Turner, Wood Turning, Turning, Project, Ossett, West Yorkshire, UK, Nova, Record Power, DVR XP, BS350, Lathe, Bandsaw, Sanding, Sandpaper, Ruth Niles, Off Centre Jig, Off Center Jig, help, tips, training, learning, how to, Hollow Form Elm Pot Pourri Pot Pourri Holder Carbide Carbide Tools Carbide Turning Tools

 

#02 Quick Tip - Sanding - Wood Turning - Acolyte Turner
By: Tom Stratton
September 16, 2014 · 1,412 views

Video #02 - Sanding Quick Tip from the Acolyte Turner - Finding the Joys in Wood. I present a handy quick tip passed down to me from a 'Revered Turner' a few years ago. If you like it, please pass it on! Previous video: http://youtu.be/sna1J5VB1ic Further projects, turnings and information can be found at http://tomturns.com CHANNEL TAGS Acolyte Turner, Wood Turning, Turning, Project, Ossett, West Yorkshire, UK, Nova, Record Power, DVR XP, BS350, Lathe, Bandsaw, Sanding, Sandpaper, Ruth Niles, Off Centre Jig, Off Center Jig, help, tips, training, learning, how to, Hollow Form Elm Pot Pourri Pot Pourri Holder Carbide Carbide Tools Carbide Turning Tools

 

Quick tips, dried glue off saw blade, shellac off hands. ect.
By: Rich McNatt
August 26, 2014 · 654 views

 

Woodturning Questions answered by Sam Angelo
By: WYOMINGWOODTURNER
July 31, 2014 · 2,887 views

Sam gives an update on his Box Elder burl and shows what he has turned so far. He also answers several questions from subscribers.

 

Woodturning Tips and Tricks 2014
By: DentonTurners
July 25, 2014 · 14,547 views

The tips and tricks demo we posted two years ago was one of the most popular videos on our YouTube site. Our members stepped up again to share more of their tips, tricks, and techniques. This was recorded at the July 2014 meeting of the Golden Triangle Woodturners club n Denton Texas. Our club meets the first Monday of each month at the Center for the Visual Arts located at the corner of Hickory and Bell streets in Denton, Texas. Find out more at our club website www.goldentrianglewoodturners.org

 

Shop Hacks Tips and Tricks
By: Rich McNatt
May 18, 2014 · 1,151 views

Here are a few tips i wanted to share. Enjoy, I hope you find them useful!

 

#96 Preguntas y respuestas 6
By: Miguel Sanchez
May 01, 2014 · 6,138 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Otra de preguntas y respuestas y el canal recomendado de esta semana Carl Jacobson. https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#91 Preguntas y respuestas 5
By: Miguel Sanchez
April 19, 2014 · 6,553 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Vamos a contestar algunas de vuestras dudas. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

LIGHTING TIPS by Reed Gray aka robo hippy
By: robohippy
April 16, 2014 · 3,860 views

More new tips from RoboHippy. The importance of good lighting while bowl turning.

 

How To Do It in Crabtree Hollow
By: Paul Crabtree
February 28, 2014 · 436 views

How to do different tasks to refresh and complete projects being worked on. The 'Hollowing King' hollowing tool is in fact what makes the vase possible.

 

Q&A Basic Lathe
By: The Woodshop
February 04, 2014 · 6,774 views

How to setup a mini lathe. Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

#72 Preguntas y respuestas 4
By: Miguel Sanchez
January 16, 2014 · 6,911 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Ahi va la segunda parte de los comentarios que no pude contestar mientras estaba de vacaciones, espero que cubran todas las dudas. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#70 Preguntas y respuestas 3
By: Miguel Sanchez
January 10, 2014 · 9,237 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Ya estamos de vuelta y ya que no he podido contestar todos vuestros mensajes a tiempo he decidido hacerlo de esta manera, espero solucionar todas las dudas posibles Para accesorios fuera de españa: http://www.pennstateind.com Para accesorios en España: http://www.tornyfusta.com http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es mailto:miguel@tornoartesano.es

 

Woodturning Q&A Drive Spur
By: The Woodshop
November 30, 2013 · 26,569 views

How to use a spur center Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

Woodturning with the Opposite hand...
By: WYOMINGWOODTURNER
November 27, 2013 · 3,733 views

Sam makes a case for learning to turn with your non-dominant hand. He demonstrates ways to be safer on the lathe and to turn in a more comfortable position---by using the non-dominant hand while turning.

 

#62 Preguntas y respuestas 2
By: Miguel Sanchez
October 29, 2013 · 6,475 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Aclarando cuestiones que me proponeis y que espero que os sean de utilidad. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#39 Preguntas y respuestas (resubido)
By: Miguel Sanchez
October 22, 2013 · 6,182 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Algunas aclaraciones y respuestas para ponernos al dia. Saludos. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Wood Turning - Your Questions Answered
By: Mike Waldt
October 13, 2013 · 5,725 views

I answer some of the more common questions that I get frequently asked, a rather long video I'm afraid. Finishes : Sanding : Work holding : Hot Glue : Basic Personal Protection : Dust Extraction : Green Wood Bowls and Goblets

 

Spraying (Lacquer) tips for Woodturners: Finex 1000
By: WYOMINGWOODTURNER
August 27, 2013 · 23,055 views

(No actual Spraying)!!! Sam shows his shop-made jig that holds a turned hollow form as he sprays lacquer. He covers some spraying tips, sanding, and reviews his Finex 1000 spray gun. Spraying round objects is a challenge. This jig helps during the spraying process.

 

Wood Turning Q&A How to clean out the inside of a bowl using a scraper
By: The Woodshop
August 17, 2013 · 9,919 views

I'm clean out the inside of a bowl using a scraper in this video. Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

Woodturning Q&A Scrapers
By: The Woodshop
August 06, 2013 · 34,747 views

In this video I demonstrate how to use a scraper and a shear cut. Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

Woodturning Q&A Beading tool
By: The Woodshop
July 29, 2013 · 16,819 views

How to use a beading tool. Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

# 175 New Shop Tips
By: Cap'n Eddie Castelin
July 05, 2013 · 35,204 views

I gathered several ideas at the AAW Symposium, these are two of them relating to sanding. Got one? Share it with me only by e-mail. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

Woodturning Q&A Dust Collection
By: The Woodshop
July 04, 2013 · 6,900 views

In this video I talk about dust collection and how they work. Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

#33 Consejo util
By: Miguel Sanchez
May 24, 2013 · 17,855 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Un consejo rapido, sobre todo para los que empezais, sin editar de ninguna forma pero os prometo que es muy util.

 

Woodturning Q&A Duplicating and Spur Center
By: The Woodshop
May 15, 2013 · 3,493 views

Duplicating turning projects Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

Woodturning Q&A Off-Center turning
By: The Woodshop
May 08, 2013 · 9,022 views

In this video I show how to do Off-Center turning without a chuck and how have my shop setup for filming. Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

Gary demonstrates tips and techniques for making a footed bowl
By: Roger Meeker
April 23, 2013 · 1,321 views

Detroit Area Woodturners

 

Wood Turning - Tales of Fails
By: Mike Waldt
April 11, 2013 · 6,677 views

My two failed projects :(

 

Sharpening a Bowl Gouge - Part 2 - A Detailed Look - Woodturning Tips
By: The Woodturning Store
March 18, 2013 · 10,968 views

This HD video shows give a detailed look at how I sharpen my woodturning bowl gouges on the Oneway Wolverine system with the Geiger Vertical Solution. Please take at look at my other videos and subscribe to my channel for more How-to and instructional woodturning videos. Thanks for watching! Sponsored by www.thewoodturningstore.com

 

Wild Cherry - Quick Turning Tips
By: nwfiguredwoods
February 22, 2013 · 806 views

Les from North Woods Figured Woods covers how to turn Wild Cherry, a species occasionally offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

White Oak - Quick Turning Tips
By: nwfiguredwoods
February 22, 2013 · 1,527 views

Les from North Woods Figured Woods covers how to turn White Oak, a species offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

Silver Maple - Quick Turning Tips
By: nwfiguredwoods
February 22, 2013 · 378 views

Les from North Woods Figured Woods covers how to turn Silver Maple, a species offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

Madrone - Quick Turning Tips
By: nwfiguredwoods
February 22, 2013 · 944 views

Les from North Woods Figured Woods covers how to turn Madrone, a species offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

California Buckeye - Quick Turning Tips
By: nwfiguredwoods
February 22, 2013 · 655 views

Les from North Woods Figured Woods covers how to turn California Buckeye, a species offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

Box Elder - Quick Turning Tips
By: nwfiguredwoods
February 22, 2013 · 1,560 views

Les from North Woods Figured Woods covers how to turn Box Elder, a species offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

Black Walnut - Quick Turning Tips
By: nwfiguredwoods
February 22, 2013 · 2,273 views

Les from North Woods Figured Woods covers how to turn Black Walnut, a species offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

Black Locust - Quick Turning Tips
By: nwfiguredwoods
February 22, 2013 · 2,718 views

Les from North Woods Figured Woods covers how to turn Black Locust, a species offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

Big Leaf Maple - Quick Turning Tips
By: nwfiguredwoods
February 22, 2013 · 749 views

Les from North Woods Figured Woods covers how to turn Big Leaf Maple, a species offered at North Woods Figured Woods. www.nwfiguredwoods.com Music By Kevin McCleod, www.incompetech.com Piece Used: Dirt Rhodes Videography by Guthrie Straw - www.pinchflatfortune.com

 

Wood Turning Q&A Setting up my lathe
By: The Woodshop
February 17, 2013 · 22,437 views

I just moved into my new shop. In this video I'm setting up my lathe in my new shop. Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

#155 tidbits2
By: Cap'n Eddie Castelin
February 15, 2013 · 7,234 views

 

Woodturning Q&A Sanding Tips
By: The Woodshop
January 23, 2013 · 10,978 views

In this video I talk about sanding and way I turn the lathe speed down. Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

WGNC Woodturning Jigs, Tips & Tricks
By: weekendturner.com
January 11, 2013 · 66,573 views

WoodturnersGuild.com members demonstrate their favorite home-made jigs, tips and tricks at the Dec. 10, 2013 meeting in the NC State Craft Center.

 

Woodturning- Gadgets Gizmos and Gimmicks 5 of 5
By: RealRuler2112
December 30, 2012 · 10,377 views

I DID NOT PRODUCE THIS VIDEO!!! The original video was produced by the Denton Woodturners and is at http://www.youtube.com/watch?v kmrn47Oi-s0 The audio on the original video is horrible - low (virtually inaudible) volume, lots of clothing rubs on the mic, etc. I edited the audio to remove the pops and boosted the volume so it's listenable for my own use. It's still not perfect, but I figured I'd share as the video has some excellent tips in it. This is part 5 of 5.

 

Woodturning- Gadgets Gizmos and Gimmicks 4 of 5
By: RealRuler2112
December 30, 2012 · 13,925 views

I DID NOT PRODUCE THIS VIDEO!!! The original video was produced by the Denton Woodturners and is at http://www.youtube.com/watch?v kmrn47Oi-s0 The audio on the original video is horrible - low (virtually inaudible) volume, lots of clothing rubs on the mic, etc. I edited the audio to remove the pops and boosted the volume so it's listenable for my own use. It's still not perfect, but I figured I'd share as the video has some excellent tips in it. This is part 4 of 5.

 

Woodturning- Gadgets Gizmos and Gimmicks 3 of 5
By: RealRuler2112
December 30, 2012 · 15,130 views

I DID NOT PRODUCE THIS VIDEO!!! The original video was produced by the Denton Woodturners and is at http://www.youtube.com/watch?v kmrn47Oi-s0 The audio on the original video is horrible - low (virtually inaudible) volume, lots of clothing rubs on the mic, etc. I edited the audio to remove the pops and boosted the volume so it's listenable for my own use. It's still not perfect, but I figured I'd share as the video has some excellent tips in it. This is part 3 of 5.

 

Woodturning- Gadgets Gizmos and Gimmicks 2 of 5
By: RealRuler2112
December 29, 2012 · 21,130 views

I DID NOT PRODUCE THIS VIDEO!!! The original video was produced by the Denton Woodturners and is at http://www.youtube.com/watch?v kmrn47Oi-s0 The audio on the original video is horrible - low (virtually inaudible) volume, lots of clothing rubs on the mic, etc. I edited the audio to remove the pops and boosted the volume so it's listenable for my own use. It's still not perfect, but I figured I'd share as the video has some excellent tips in it. This is part 2 of 5.

 

Woodturning- Gadgets Gizmos and Gimmicks 1 of 5
By: RealRuler2112
December 29, 2012 · 76,161 views

I DID NOT PRODUCE THIS VIDEO!!! The original video was produced by the Denton Woodturners and is at http://www.youtube.com/watch?v kmrn47Oi-s0 The audio on the original video is horrible - low (virtually inaudible) volume, lots of clothing rubs on the mic, etc. I edited the audio to remove the pops and boosted the volume so it's listenable for my own use. It's still not perfect, but I figured I'd share as the video has some excellent tips in it. This is part 1 of 5.

 

Spalted Wood - Quick and Easy Tips For Turning
By: nwfiguredwoods
October 24, 2012 · 11,986 views

In this video demonstration, Les from North Woods shows us how to successfully turn spalted wood. - Known for its beauty, this fascinating but sometimes fickle wood is a favorite for turners looking to improve their skills while yielding beautiful results. North Woods carries a wide selection of spalted pieces which can be seen at www.nwfiguredwoods.com Music by Kevin McLeod www.incompetech.com Pieces used: Dirt Rhodes, Matt's Blues, Niles Blues, Porch Blues, Slow Burn Videography by Guthrie Straw - www.pinchflatfortune.com

 

Quick Tip - Entry Cuts
By: American Association of Woodturners
October 15, 2012 · 8,700 views

Woodturning FUNdamentals provides a resource for basic woodturning skills and techniques. Learn more about the American Association of Woodturners (woodturner.org). This Quick Tip presents Stuart Batty demonstrating entry cuts.

 

Woodturning Gadgets - Gizmos - and Gimmicks
By: DentonTurners
October 08, 2012 · 35,635 views

The members of our woodturning club shared their various tips, gadgets, gizmos, and gimmicks during our September 2012 club meeting. In this video you'll find tips from keeping track of that pencil that always seems to vanish to transferring patterns for embellishing your turned items, and many other ideas for making your turning easier and more productive. Find out more about our club in Denton, Texas at www.goldentrianglewoodturners.org

 

Quick Tip - Knocking Down the Corners
By: American Association of Woodturners
August 08, 2012 · 10,022 views

Woodturning FUNdamentals provides a resource for basic woodturning skills and techniques. Learn more about the American Association of Woodturners (woodturner.org). This Quick Tip presents Stuart Batty using a spindle roughing gouge to knock down the corners off a block.

 

Q&A session with Cap'n
By: Cap'n Eddie Castelin
July 29, 2012 · 12,111 views

 

The Woodturning Mobile phone holder for videoing - patent applied for...LOL!!!!!
By: Mike Waldt
June 24, 2012 · 3,491 views

A brief video on my mobile phone adjustable stand...the prototype....have a laugh at my expense....because I did!

 

Quick Tip - Tapered Cylinder
By: American Association of Woodturners
June 22, 2012 · 3,493 views

Woodturning FUNdamentals provides a resource for basic woodturning skills and techniques. Learn more about the American Association of Woodturners (woodturner.org). This Quick Tip presents Beth Ireland making a tapered cylinder.

 

Quick Tip - Straight Cylinder
By: American Association of Woodturners
June 22, 2012 · 4,222 views

Woodturning FUNdamentals provides a resource for basic woodturning skills and techniques. Learn more about the American Association of Woodturners (woodturner.org). This Quick Tip presents Beth Ireland making a straight cylinder.

 

Why the long handle?
By: woodturningwithtim1
June 02, 2012 · 12,112 views

Tim uses many tools but some viewers are wondering why some have extra long handles. This is his attempt to explain.

 

Quick Tip - Earth Magnets
By: American Association of Woodturners
April 17, 2012 · 5,775 views

Woodturning FUNdamentals provides a source for basic woodturning skills and techniques. Here Beth Ireland shows a quick tip at the lathe, utilizing earth magnets. Learn more about the American Association of Woodturners at woodturner.org.

 

WGNC Demo: More pro tips from Terry Brown
By: weekendturner.com
April 13, 2012 · 6,117 views

WGNC member and 52-year-professional turner Terry Brown returns to demonstrate some of his many tips and jigs at the April 12, 2012 meeting of WoodturnersGuild.com of North Carolina.

 

WGNC demo: Terry Brown shares tips from a pro
By: weekendturner.com
March 10, 2012 · 9,734 views

WoodturnersGuild.com member Terry Brown demonstrates tips and techniques he has mastered after 52 years as a professional woodturner. Recorded March 8, 2012, at the NC State Craft Center.

 

Wood Lathe Information Tips and Advice
By: Lamar Sineath
February 03, 2012 · 4,702 views

Tips and Advice about wood lathes. An introduction to new people learning about features of a wood lathe.

 

Quick Tip - Using Your Lathe's Headstock
By: American Association of Woodturners
January 31, 2012 · 7,227 views

Woodturning FUNdamentals provides a source for basic woodturning skills and techniques. Learn more about the American Association of Woodturners at woodturner.org.

 

Quick Tip - Finding the Center
By: American Association of Woodturners
January 16, 2012 · 8,449 views

Woodturning FUNdamentals provides a source for basic woodturning skills and techniques. Here Beth Ireland shows an old carpenter's trick on how to quickly center an object on your lathe. Learn more about the American Association of Woodturners at woodturner.org.

 

Clearing up a few questions
By: Carl Jacobson
December 14, 2011 · 12,954 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. Just clearing up a few questions about the wax and hot glue. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - - #woodturning #woodturning #woodlathe #woodturningprojects #carljacobson

 

107 More Christmas light tips
By: Cap'n Eddie Castelin
November 27, 2011 · 6,183 views

A few more notes on a simple project. Enjoy.

 

Third Wood Lathe and Tips.mp4
By: Lamar Sineath
October 11, 2011 · 7,697 views

I talk about my third wood lathe. My first lathe lasted like a week. Second wood lathe lasted a month and was fine but I returned it and upgraded to a heavy duty high quality lathe. I also show you my beginner wood turning work and my pitfalls. I know I haven't really made much of anything but I'd really like to make a chairs that these small poles can be turned quickly into artistic legs and spindles.

 

Napkin ring tips
By: Bob Hamilton
July 31, 2011 · 11,421 views

This is just a quick video showing a few tips for turning napkin rings. I have just finished turning a whole bunch of napkin rings to be given out at my son's wedding reception.

 

#84 Turning Tips
By: Cap'n Eddie Castelin
May 30, 2011 · 17,618 views

A few tips from the shop to help you turn better and still save money.

 

Sharpening tips
By: john60lucas
April 10, 2011 · 40,420 views

This video shows some sharpening tips using the Oneway sharpening system and the wolverine Jig. It also shows sharpening the Stewart Batty Grind using the Oneway sharpening platform.

 

SkewTips
By: ric47scroll
January 21, 2011 · 24,450 views

Just a few quick tips on using the skew. There are many more videos on my web site at http://www.scrollsaws.com/WoodLathe/woodlatheVideo.htm. I also have a large selections of scrollsaw videos..

 

turning tips.avi
By: Cap'n Eddie Castelin
September 15, 2010 · 12,552 views

A collection of tips and tricks I have received over the years. The BWT website used to include all these, but now you have to get them from me, FREE!. Just E-Mail me at eddiecastelin @ cox.net and I'll send you a packet of PDFs.

 

Woodturning projects turning tips
By: Carl Jacobson
July 02, 2010 · 4,619 views

http://theturningshop.blogspot.com/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects with Carl Jacobson. Wood turning basics on a Lathe with basic wood turning tools. Taking you from start to finish with a ruff piece of wood to your sanded and finished project with paste wax and mineral oil for a superb finish. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Wood Turning Sanding and Tool Tips
By: Carl Jacobson
April 25, 2010 · 23,181 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects with Carl Jacobson. Wood turning basics on a Lathe with basic wood turning tools. Taking you from start to finish with a ruff piece of wood to your sanded and finished project with paste wax and mineral oil for a superb finish. Sanding tips for lathe turning - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - - #woodturning #woodturning #woodlathe #woodturningprojects #carljacobson

 

Morse Taper, a few tips
By: Cap'n Eddie Castelin
March 09, 2010 · 93,517 views

How to take care and get the most out of your Morse Taper and accessories

 

More technique
By: Bob Hamilton
June 18, 2009 · 15,951 views

A couple more techniques that I often find useful.

 

Techniques
By: Bob Hamilton
June 12, 2009 · 19,428 views

Just a short one showing a couple of techniques that I use quite frequently. The first part shows shear scraping with the bowl gouge and at the end I decorate a bowl bottom with my point tool.

 

Cap's shop tips
By: Cap'n Eddie Castelin
September 21, 2008 · 13,809 views

Turning a soft tip for your revolving center

 

Return to Turning Videos

Great Bargains
(ends October 24, 2019)


3M Professional Face Shield

On Sale for only $14.99

Save $3.00

List price: $17.99

Clear, 3/32" thick polycarbonate window provides an unobstructed, non-distorted view. Adjustable suspension headband fits head sizes from 6-1/2 to 8. Tips up and out of the way when not needed.

Click here for more information or to purchase

 


Rockler Carbide Pen Turning Tools

On Sale for only $109.99

Save $30.00

List Price: $139.99

This three piece set has comfortable rubber handles which provide excellent control and reduce fatigue—replaceable carbide tips require no sharpening.

Click here for more information or to purchase

 


Bar Tool Turning Kits

Get the 5 Piece Set for only $68.95

Save $15.00

Everything you need to turn out cocktails that friends will rave about—includes all five of their Bar Tool Turning Kits in one cost-saving package. Includes: bottle opener, double jigger, muddler bar, bar spoon, cocktail strainer and 5 threaded inserts.

Click here for more information or to purchase


Dust Right Lathe Dust Collection System

For only $44.99

Save $15.00

List Price: $59.99

This highly adjustable steel boom arm holds a semi-cylindrical dust scoop that closely cups your small turning projects, capturing nearly all dust!

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Hunter Woodturning Tools
Rockler
Saburrtooth

(Click any Ad to go to our Sponsor's Website)