Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Baby Rattles Videos (40)

Sort by

Or click here to: Search All Videos


Walnut and Bocote Rattle Turn
By: BitterRoot Workshop
October 13, 2019 · 50 views

Turned this rattle for my incoming niece/nephew.

 

Woodturning (A BABY RATTLE SPINNING TOP) for my Patron's new baby boy !!
By: Woodturning with Steve Twydell
September 15, 2019 · 423 views

This week I will attempt to woodturn a baby rattle with a difference. My plan is to make a baby rattle than can then double as a spinning top once the child gets older. Come join in the live chat and have some fun asking questions or just chewing the fat with friends. If you would like me to attempt a live project and you have materials or blanks you would like to send me please send them to the address below ! STEVE TWYDELL, PW345466 DPD, PARCEL WIZARD, UNIT 5, TRENCH PARK, TRENCH ROAD, NEWTOWNABBEY, BT36 4LB PLEASE NOTE: IF YOU ARE SENDING ME SOMETHING, PLEASE COULD YOU MARK A LOW VALUE

 

woodturning a beech rattle
By: Dr Ali's Woodturning
August 23, 2019 · 127 views

this is my first video; go easy

 

Woodturning a Baby Rattle for my Son - Padauk and Ebony
By: Nathan Cumming
January 10, 2019 · 2,422 views

In this video I, at last, turn a Baby Rattle for my son Matthew. This rattle is a personal design that I sketched out and selected wood species for. I decided to laminate a striped pattern using Padauk, Ebony and Idigbo, with a solid Ebony handle. This rattle was turned in two parts to hollow the inside before a few small stones were placed inside to create the rattle sound. To keep it safe for my son to use I sanded to a smooth 400 grit finish, oiled with Walnut oil and sealed with pure Carnauba Wax. I am very pleased with how this rattle turned out, exactly to the design that I sketched before starting. My son really seems to like it. I hope you have enjoyed watching me turn this Padauk and Ebony baby rattle. Thank you to all my Subscribers. If you havn't yet Subscribed please visit my channel and check out my other videos and consider Subscribing before you leave. Thank you.

 

New Baby Rattle
By: Erik Anderson
October 31, 2018 · 1,666 views

In this video I turn a new barbell rattle for my grandson who is on the way Nov. 2018 - - - - - - Please watch: 'Miter Box Pen' https://www.youtube.com/watch?v iefENj4JGJw - - - - - -

 

Woodturned baby rattle with captive rings
By: Woodturning by Alan Scannell
July 06, 2018 · 140 views

I make a baby rattle from some apple wood and add some captive rings to it.

 

Rattle for Zara, born 10.01.18
By: CL Woodturning
January 14, 2018 · 187 views

 

Woodturning - The Off center On center Bowl
By: Andy Phillip
November 24, 2017 · 101,626 views

Turning a bowl from Wenge with an off centre Zebrano insert .. Inspired to try this off centre insert after seeing an early hollow form by David Ellsworth . Thanks for watching .. my etsy & Instagram links https://www.etsy.com/uk/shop/AndyPhillipHandmade? https://www.instagram.com/andyphillip_/ DISCLAIMER : My videos are for entertainment purposes only. When using any tools/machinery always read & understand manufacturer's guidelines & safety instructions. The methods I use may not be the safest, so please be responsible for your own safety ...

 

Woodturning With Naked Turner Baby Rattle For New Anderson Family Member
By: Erik Anderson
May 25, 2017 · 3,078 views

new baby rattle for new Anderson Family Member - - - - - - Please watch: 'Miter Box Pen' https://www.youtube.com/watch?v iefENj4JGJw - - - - - -

 

#182 Baby rattle for Isabella
By: Miguel Sanchez
February 28, 2017 · 1,963 views

Este video tambien esta en Español sigue el enlace mas abajo. This video is also in English, click the link below. https://www.youtube.com/channel/UCyOE_zdEBv4UcK5a_a3Z6hA Miguel Sanchez 2: https://www.youtube.com/channel/UC2JiORNXY4uz2wg3hL1oLHA Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez http://www.tornoartesano.es mailto:miguel@tornoartesano.es

 

#182 Sonajero para Isabella
By: Miguel Sanchez
February 28, 2017 · 7,433 views

Este video tambien esta en Español sigue el enlace mas abajo. This video is also in English, click the link below. https://www.youtube.com/channel/UCyOE_zdEBv4UcK5a_a3Z6hA Miguel Sanchez 2: https://www.youtube.com/channel/UC2JiORNXY4uz2wg3hL1oLHA Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez http://www.tornoartesano.es mailto:miguel@tornoartesano.es

 

Woodturning Baby Rattle
By: Pat Lap - Le PicBois
January 31, 2017 · 5,088 views

[ I made this rattle for my friend's baby girl. It's made with maple burl & ebony. ] Inspired by Carl Jacobson's video: https://www.youtube.com/watch?v 3HSFzHr3Ls8 The voice behind the Intro - Tim Sway: https://www.youtube.com/user/timsway Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois _________________________________________ Thanks to ALL my supporters on Patreo

 

Ava's rattle and Yorkshire grit arrives
By: MARK Baid
January 31, 2017 · 171 views

 

Baby Rattle for Alijah
By: MARK Baid
January 22, 2017 · 233 views

I make a baby rattle out of maple and zebra wood for my friends, Amanda and Andrews' new baby son Alijah. Big thanks to Erik Anderson for the inspiration.

 

Rassel drechseln
By: Drechseln mit MP Martin Preller
September 05, 2016 · 3,670 views

über YouTube Capture

 

Segmented Baby Rattle with Joe Tupy July 21, 2016
By: Lincoln Land Woodturners
July 24, 2016 · 251 views

LLWT Member Joe Tupy turns a segmented baby rattle during the club's monthly meeting on July 21, 2016.

 

Woodturning With The Naked Turner Baby Rattle For Another Mayne Man
By: Erik Anderson
June 25, 2016 · 1,202 views

In this video I make A baby rattle for a friend and their new baby! - - - - - - Please watch: 'Miter Box Pen' https://www.youtube.com/watch?v iefENj4JGJw - - - - - -

 

Shake That Thing! How to Woodturn a Baby Rattle
By: Mike Peace Woodturning
June 10, 2016 · 6,857 views

I demonstrate woodturning a baby rattle by splitting the blank and hollowing each half while holding in a scroll chuck using two jaws. After adding popcorn kernals I glue up the two sides and do the final turning to shape. I credit Richard Raffan for this technique as shown in his book Turning Toys with Richard Raffan. As an Amazon Associate I earn from qualifying purchases from my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on http://www.mikepeacewoodturning.com/resources-3/.

 

Em's Rattle
By: Erick Wood
May 01, 2016 · 44 views

Emily turning a child's rattle with captured rings out of poplar. Links Website: www.woodsheddesigns.net Rattle for purchase: http://www.woodsheddesigns.net/#!product-page/dmhxt/2062ef79-04e6-40b6-938d-0663f9225a5d Facebook: WoodShed Designs Visit our super awesome mentor Carl Carl’s YouTube: Carl Jacobson Carl’s website: www.woodshop.tv Music: Malt Shop Bop Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

Woodturning With The Naked Turner Baby Rattle For My New Nephew
By: Erik Anderson
April 09, 2016 · 6,762 views

In this video I show the making of a dumbell style baby rattle out of upcycled Alder that I made for my new Nephew!

 

Emily's Maple Rattle
By: Erick Wood
February 24, 2016 · 26 views

Emily turns a captured ring rattle out of maple. Video was made using a compressed video format so the video is short. Hope you enjoy and don't forget to subscribe. Our new website is up at www.woodsheddesigns.net Tell us what you think. Website: www.woodsheddesigns.net Facebook: WoodShed Designs Visit our super awesome mentor Carl Carl’s YouTube: Carl Jacobson Carl’s website: www.woodshop.tv

 

Fabrication d'un Hochet à anneaux - Manufacturing of a Rattle with rings
By: J'M Le Bois
December 21, 2015 · 4,708 views

Voici une nouvelle vidéo , sur un hochet a anneaux cette fois ci . J'espère qu'elle vous plaira, si c'est le cas n'oubliez pas de laisser un pouce vert et de vous abonnez pour voir toutes mes prochaines vidéos ;) Lien du sondage pour la prochaine vidéo : http://strawpoll.me/6298352 Lien pour envoyer vos photos : jm-le-bois@outlook.com Lien pour les dons : https://www.paypal.com/fr/cgi-bin/webscr?cmd _flow&SESSION QP3UcMl9FGBLy_jwfeZpBQLaysT0aMCDtYh0qN11ck_aCU1kVFi7k0na6Dy&dispatch 5885d80a13c0db1f8e263663d3faee8dcce3e160f5b9538489e17951d2c62172 N’hésitez pas a me donner des idées d'objets a tourné ;)

 

Mas sonajeros
By: HERRAMIENTALLER 2021
November 02, 2015 · 103 views

Practicas y mas practicas

 

Sonajeros de practica
By: HERRAMIENTALLER 2021
October 31, 2015 · 82 views

Utilizando tecnica para argollas

 

Woodturning a Baby Rattle - First Attempt
By: Ed Krystosek
April 14, 2015 · 408 views

A step by step on how I turned a baby rattle out of purple heart and spalted tamarind wood.

 

How to Turn a Baby Rattle with Captive Rings (Part 2 of 2)
By: Mike Peace Woodturning
April 07, 2015 · 10,857 views

Mike demonstrates how to woodturn a baby rattle with captive rings and shows how to make a captive ring tool. This is part 2 of 2. Part 1 of 2 is available here: https://www.youtube.com/watch?v HA3eAK9KsTo Check out my blog for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers channel. MikePeaceWoodturning.blogspot.com

 

How to Turn a Baby Rattle with Captive Rings (Part 1 of 2)
By: Mike Peace Woodturning
April 07, 2015 · 14,921 views

Mike demonstrates how to woodturn a baby rattle with captive rings and shows how to make a captive ring tool. This is part 1 of 2. Part 2 of 2 is available here: https://youtu.be/H8niu5RGmNk Check out my blog for demonstration handouts and downloadable copies of articles I have published http://mikepeacewoodturning.blogspot.com

 

Maple Burl Baby Rattle
By: Carl Jacobson
March 06, 2015 · 15,505 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg I made this baby rattle out of Maple burl, for Nathan and his wife. i turned the rattle on the lathe. Tom https://www.youtube.com/channel/UC8XZ_GfvCtF_E_6vJjG8pyg Pat https://www.youtube.com/channel/UCcM_SykaFqrxVnq52MjI6UA/feed Tools used in the videos Lathe Robust: http://www.turnrobust.com/ Easy Wood Tools: http://www.easywoodtools.com/ Thompson Lathe Tools: http://thompsonlathetools.com/ Howard beeswax: http://amzn.to/2zAv185 Face Shield: http://amzn.to/2y5gDQx sandpaper

 

Kugelstandfuß drechseln [HD]
By: Tiroler Drechsler
February 19, 2015 · 4,962 views

Damit die Kugel nicht wegrollt bekommt sie von mir einen Standfuß. Und es sieht gleich schon viel besser aus. __________________________________________ Musik: KsTBeats https://www.youtube.com/user/KsTBeats __________________________________________ Kamera: Sony Xperia Go Have fun! \( _ )

 

Wood Turning a mutant rattle: Fail
By: Adze Woodturning
January 29, 2015 · 338 views

I attempted to turn a rattle from green wood. Third time was the charm.

 

drechseln einer Babyrassel [HD]
By: Tiroler Drechsler
October 23, 2014 · 18,198 views

Ein perfektes Spielzeug für ein Baby. Die mit Dekosand gefüllte Rassel ist etwas 8cm Lang und hat einen Durchmesser von 5cm. ________________________________________ Die Musik ist von KsTBeats: https://www.youtube.com/user/KsTBeats ________________________________________ Kamera: Sony Xperia Go Have fun! \( _ )

 

Turning a Baby Rattle (sawdust rd. Woodshop)
By: Johnny Boudreau
August 23, 2014 · 5,441 views

Disclaimer: Use only food safe wood finish. Baby should not be left unattended with wooden rattles. Wooden rattles should be taken away once baby starts teething. Sorry about that, but now that the legal mumbo jumbo is out the way, here's how I made the baby rattle. I used 2' x 2' x 10' ( approximately) piece of mystery wood . This one is more for decorative purposes. For a more baby friendly rattle, maple is suggested (as seen on many website discussing the subject). I turned a ring for the top part of the rattle and added a nut in the bottom part. I used the piece I cut out of the neck to plug the bottom. Makes a nice sound no matter where they grab it. I used salad bowl oil for the finish. My 3 1/2 month old son seemed intrigued by it, I'm hoping he'll want to play with it soon :) Thanks for watching! Music by Rusty Guitard: https://www.youtube.com/channel/UCdI608okmTH4hkw3b30MBsQ

 

Woodturning: Baby Rattle (complete)
By: Roundabout Woodworks
June 03, 2014 · 60,353 views

Turning a baby rattle, from square stock to handheld noisemaker.

 

Turning a wooden rattle on the lathe
By: Bryson DuPree
April 01, 2014 · 458 views

This is a video of me turning a piece of Mesquite to a rattle mostly for practice You can follow me on Instagram @dupreewoodworking To see more of my woodworking projects

 

Woodturning With Naked Turner Eli Baby Rattle
By: Erik Anderson
March 23, 2014 · 2,882 views

Wood turning video

 

Wood Turning With Naked Turner Maple and PurpleHeart Rattle
By: Erik Anderson
December 14, 2013 · 3,409 views

 

Wood Turning With Naked Turner Maple and PurpleHeart Rattle
By: Erik Anderson
July 14, 2013 · 50,664 views

Woodturning video

 

North Wood Figured Woods - 'Baby Rattle'
By: nwfiguredwoods
September 26, 2011 · 2,229 views

A 'quick' introduction to the demo's provided at North Woods open house shows. We provide a large variety of Pacific Northwest hardwoods to suit your turning needs. Visit us at www.nwfiguredwoods.com for more information! View the finished piece at: http://i.imgur.com/nFrhU.jpg Turning Demonstration: Mike Meredith www.doctorswoodshop.com Videography: Guthrie Straw - www.pinchflatfortune.com Rattle Style: Nick Cook - http://www.nickcookwoodturner.com/articles-babyrattle.pdf Music: 'Windswept' Kevin MacLeod (incompetech.com) Licensed under Creative Commons 'Attribution 3.0' http://creativecommons.org/licenses/by/3.0

 

Baby rattle demo
By: Roundabout Woodworks
September 27, 2010 · 910 views

Hand turned baby rattle

 

Wood Turning Project Baby Rattle
By: Carl Jacobson
April 14, 2010 · 27,341 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. I turned a baby rattle on the lathe. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - - #woodturning #woodturning #woodlathe #woodturningprojects #carljacobson

 

Return to Turning Videos

Great Bargains
(ends November 27, 2019)


Customized Electric Branding Iron

On Sale for only $99.99

Save $20.00

List price: $119.99

This customized, 110V electric branding iron will let you imprint your woodturnings in way that will never fade away. You will be able to order from fifteen different standard-size design choices, enter your custom text and proof the final design. The delivery of your custom burning head will take 2 - 3 weeks.

Click here for more information or to purchase

 


Rockler Mini Carbide Pen Turning Tools

On Sale for only $149.99

Save $70.00

List Price: $219.99

This three piece set has comfortable rubber handles which provide excellent control and reduce fatigue—replaceable carbide tips require no sharpening. The 3-piece sets comes with diamond, square and round carbide tipped tools.

Click here for more information or to purchase

 


Bar Tool Turning Kits

Get the 5 Piece Set for only $68.95

Save $15.00

Everything you need to turn out cocktails that friends will rave about—includes all five of their Bar Tool Turning Kits in one cost-saving package. Includes: bottle opener, double jigger, muddler bar, bar spoon, cocktail strainer and 5 threaded inserts.

Click here for more information or to purchase


Pen Press/Drilling Jig

For only $89.99

Save $10.00

List Price: $99.99

Drill and assemble your pens perfectly with flush fittings and a smoothly-operating mechanism! This dual-purpose jig takes care of both prep work and assembly. It holds your blank firmly in position for drilling, creating a precise, perfectly centered hole the entire length of the pen. Later, it smoothly presses your parts together without any bowing or misalignment. Notched jaws automatically center the blank for drilling, while two countersunk holes center the parts during assembly. Large clamping wheel provides slow, controlled pressure so you'll never crack a casing again.

Click here for more information or to purchase


Trend® Air Circulating Airshield Pro

For only $369.99

Save $30.00

List Price: $399.99

Protect your lungs, face and eyes during virtually any woodworking task with the air-circulating Trend® Airshield Pro. Its built-in fan circulates filtered air to prevent fogging, provide cooling and protect users from dust particulates down to 0.6 microns in size at a 98% efficiency rate. This model also meets ANSI Z87+ standards for eye-protection. It features an improved headband with a ratchet suspension and pivoting nape back strap for enhanced comfort, fit and durability. The nickel metal hydride battery allows for up to eight hours of operation on a full charge, twice the length of previous models. Includes a charger, airflow indicator and pre-installed plastic film overlay to prevent buildup of sap after heavy turning jobs, and to prevent scratching.

Click here for more information or to purchase

Great Bargains
(ends December 24, 2019)


Denim Woodturner's Apron

On Sale for only $17.99

Save $12.00

List price: $29.99

This is a one-size fits all, heavy duty denim apron with a soft-cloth collar and criss-cross shoulder straps. It even includes a pencil pocket.

Click here for more information or to purchase

 


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase

 


Sorby 6-Piece Woodturning Set with Book and DVD (Woodturning: A Foundation Course)

For only $229.99

Save $100.00

List Price: $329.99

Robert Sorby's flagship set of turning tools is designed to fill the needs of woodturners from beginner to professional. These high-quality tools will shorten the learning curve for those just starting out, and are sure to impress the seasoned woodturner. The set comprises six of Robert Sorby's core range of tools: a roughing gouge, spindle gouge, bowl gouge, skew, parting tool and scraper. Each tool is crafted from the highest quality high speed steel, and married to a comfortable handle turned from solid ash. The set arrives in a high quality box that provides an attractive presentation as a gift, and practical storage thereafter.

Click here for more information or to purchase


Dust Right® Lathe Dust Collection System

For only $39.99

Save $20.00

List Price: $59.99

This highly adjustable steel boom arm holds a semi-cylindrical dust scoop that closely cups your small turning projects, capturing nearly all dust!

Click here for more information or to purchase


Excelsior Mini Lathe

For only $229.99

Save $70.00

List Price: $299.99

The Excelsior 5-Speed Mini Lathe can turn bowls of almost 10" in diameter and spindles up to 17-3/4" in length, making it perfect for chair legs, small table legs and an endless array of decorative turnings. A convenient door provides easy access to the belt, along with 5 different speeds: 760, 1100, 1600, 2200 and 3200 RPM. Cast-iron body provides mass for minimal vibration, stable turning and maximum durability.

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Woodturning Tool Store
Woodturning Online
Woodturner's Tools

(Click any Ad to go to our Sponsor's Website)