Woodturning Online Videos

Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Knobs Videos (16)

Sort by

Or click here to: Search All Videos

Hand woodturning Drawer Knobs- 2 different metods
By: woodturner21
October 27, 2017 · 8,043 views

This video shows two of the many methods of turning drawer knobs, one with a chuck and one between centres. The first knob is a copy to repair a chest of drawers while the second is a standard type, both are compared for accuracy at the end of each demo.


Practical Turning Part 1 - Episode 82
By: Paul Lockwood
June 17, 2017 · 461 views

A 3 part mini series on Practical Turning using scrap softwood, This is part 1 where I use a scrap piece of 2'x2' to create some knobs for a draw and the door of my workshop. Part 1 - This video Draw / Door knobs Part 2 - A mini bowl for the workshop https://youtu.be/aCdpYfOJgcc Part 3 - A small pot to hold Sandpaper, just like a pen pot https://youtu.be/o_WCVVmqZZk Music Stars Collide (Instrumental) By Josh Woodward http://freemusicarchive.org/music/Jos... From The Free Music Archive http://freemusicarchive.org CC Attribution 4.0 International https://creativecommons.org/licenses/... Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1


Quick look at some simple knobs
By: Erik Anderson
November 27, 2016 · 779 views

Take a quick peek - - - - - - Please watch: 'Miter Box Pen' https://www.youtube.com/watch?v iefENj4JGJw - - - - - -


Woodturning with Jake Gevorgian - Knob Making
By: Jake Gevorgian
June 23, 2016 · 6,855 views

making knobs


How to make a Car Radio Knob
By: RJBWoodTurner
March 20, 2016 · 2,144 views

I had a broken knob on my car stereo so I decided to turn a replacement from a scrap piece of Padauk. I like the results so much that I think I’ll turn replacements for the rest of the radio knobs as well as the temperature control knobs. I’m probably the only guy in the world with a Padauk radio knob. Let me know what you think. Regards, Bob


How to Add an Insert to a Woodturned Knob
By: Mike Peace Woodturning
November 28, 2014 · 3,030 views

Add inserts to knobs you wood turn to add a custom detail. I demonstrate how to make inserts of contrasting wood as well as how to make the inserts from vegetable ivory using Tagua Palm nuts and from 'Bovine Ivory' ( a dog bone)! Part 1 is available here: https://www.youtube.com/watch?v CsfWQoOIkNw


Cabinet Knobs Turned from Old Pine
By: India indian
September 16, 2014 · 6 views


Turn the Knob!
By: Mike Peace Woodturning
July 15, 2014 · 14,972 views

Mike Peace demonstrates how to turn a wooden knob. He explains the pros and cons of woodturning end grain vs. long grain knobs and explains how to embellish using various inserts. Part 2, Adding Inserts is available here: https://www.youtube.com/watch?v ZJHl86Z_5hs


#01 Cabinet Knobs Turned from Old Pine
By: Stephen Ogle
October 09, 2013 · 6,000 views

While turning cabinet knobs this video shows methods of turning loose grained woods like Pine.


How to turn furniture knobs.
By: Daryl Jones
January 22, 2013 · 1,363 views

How to turn your own furniture knobs


making a turned fixture knob pt.5
By: thesegmenter
July 25, 2011 · 5,123 views

the final installment on making a turned fixture knob.


making a turned fixture knob pt.4
By: thesegmenter
July 25, 2011 · 3,010 views

a multi-part series on making a turned fixture knob


making a turned fixture knob pt.3
By: thesegmenter
July 25, 2011 · 2,850 views

a multi-part series on making a turned fixture knob


how to make a turned fixture knob pt.2
By: thesegmenter
July 24, 2011 · 3,429 views

a multi-part series on making a turned fixture knob.


how to make a turned fixture knob pt.1
By: thesegmenter
July 24, 2011 · 4,599 views

a multi-part series on making a turned fixture knob. you can download the star image from http://etc.usf.edu/clipart/37700/37717/05-star_37717.htm


Un'altra mano ai tornitori (seconda parte)
By: Livio Maritati
February 10, 2011 · 26,903 views

Due altri jigs utili ai tornitori


Return to Turning Videos

Great Bargains
(ends April 25, 2019)

Square Mini Ergonomic Carbide Turning Tool

On Sale for only $49.99

Save $30.00

List price: $79.99

This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Click here for more information or to purchase


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase


Rockler Four-Piece Cheese Knife Turning Kit

7/8" On Sale for only $29.99

1 1/4" On Sale for only $39.99

Save $10.00

List Price: $39.99

The cheese cutters are made from food-grade 304 stainless steel and attached to the handles which you turn. The kit includes 1/4-20 threaded inserts. The cheese cutters themselves are dishwasher safe; the handles are easily removed for this purpose.

Click here for more information or to purchase

GVS Elipse P100 Half Mask Respirator with 2 Bonus Filters, Small/Medium

For only $25.99

Save $11.99

List Price: $37.98

These Elipse P100 Half-Mask Respirators from GVS are designed to protect against dust particles, metal fumes, mists, oil and water vapors, and even some micro-organisms. Each mask includes two low-profile filters, which permit a wide field of view, and won't interfere with safety glasses and sanding shields. The filters are easily interchangeable, and replacement filters are readily available.

Click here for more information or to purchase

Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat

For only $32.74

Save $13.70

List Price: $46.44

Shell offers built-in chin protection and extended top-of-head coverage. Highly adjustable headgear tilts visor nearer or farther from face depending on preference and application. Comfortable cell foam on back of headgear. Breathable, removable, washable headband. Comfortably worn with most goggles and respirators.

Click here for more information or to purchase

4-Piece Safety Kit

For only $19.99

Save $15.00

List Price: $34.99

Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Ideal for table saw and router table use. Angled push blocks feature ultra-grippy Bench Cookie pad material. They are great for jointer and router table applications. Table featherboard assists in holding stock against the fence while sawing or routing and helps to reduce kickback. It fits standard 3/4" x 3/8" miter slots found on table saws and router tables, and features expandable miter track bars for maximum holding power.

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Arizona Carbide
Hunter Woodturning Tools
Robust Tools

(Click any Ad to go to our Sponsor's Website)