Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Finish Turning Videos (59)

Sort by

Or click here to: Search All Videos


Different Cuts for Different Forks ·
By: Windy City Woodturners
January 10, 2017 · 433 views

Using two headstocks on a Powermatic 3520 members compared two different technique styles to cut across the grain of wood. One member using a 40/40 grind Thompson bowl gouge and the other using various kinds of spindle gouges

 

Finish cut ·
By: Nick Rosato
December 09, 2016 · 32 views

 

Rinse and Repeat Part 2 of 2 ·
By: Mike Peace Woodturning
September 23, 2016 · 2,303 views

In Part 2 I woodturn the inside and reverse the bowl to finish the bottom to remove any signs of how it was held on the lathe. Click here for Part 1 https://youtu.be/eMWDCl_oxZM where I demonstrate how to woodturn a previously roughed out bowl that has dried and turned oval. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Rinse and Repeat Part 1 of 2 ·
By: Mike Peace Woodturning
September 23, 2016 · 3,082 views

I demonstrate how to turn a previously roughed out bowl that has dried and turned oval. In Part 1 I do the outside including how I sand. Click here https://youtu.be/mA4L2_4mmh0 to watch Part 2 where I do the inside and reverse the bowl to finish the bottom to remove any signs of how it was held on the lathe. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Turned Bowl Base Finishing ·
By: Keith's Woodwork
August 15, 2016 · 143 views

Quick little tip for finishing the bottom of a bowl with a tenon. Simple templete and a router with a bowl bit.

 

Finishing cuts ·
By: Robert O Connor The Woodturning Studio
April 25, 2016 · 443 views

Short video showing Robert making final cuts to finish verdigris bowl

 

Finish Turn an Ash Vase ·
By: Turntastic Wood Designs
February 05, 2016 · 166 views

An ash vase with a walnut bottom. You can see where I rough turned the vase here https://www.youtube.com/watch?v ylCetPuISgk Please visit my etsy store at http://etsy.com/shop/turntasticwooddesign

 

Finish turning an ash bowl. Torneando un cuenco de fresno. ·
By: Mauricio Kolenc Woodturning
January 22, 2016 · 1,026 views

Finishing an Olive Ash bowl, which was rough turned from green 3 months ago.Torneado definitivo de un cuenco de Fresno olivado, pretorneado 3 meses antes. Filmed by Adam Luna. Filmado por Adam Luna.

 

Finish-turning a 20 Natural Edge Pecan Bowl ·
By: Chas Thornhill
January 04, 2016 · 15,765 views

In this video, I finish-turn a large natural edge pecan bowl that has been drying for about 3 years. The bowl is heavily undercut and that, combined with the natural edge made the finish-turning quite a challenge. The original rough-turning video was uploaded January 16, 2012 and is available here: https://www.youtube.com/watch?v WTDoB2ECxnE All music in this video is used under the Creative Commons Attribution License. Sunbirds by BOCrew (c) 2012 Licensed under a Creative Commons Attribution (3.0) license. http://ccmixter.org/files/BOCrew/38854 Ft: THEDEEPR / THECORNER / feat : FOREN

 

Clean Finishing Cuts Every Time ·
By: Carl Jacobson
November 23, 2015 · 17,207 views

A few tips for getting a clean finishing cut every time. Make sure your tool rest is close to the wood, and you're cutting close to center of the rest. A nice slow even pass will give you the best finishing cut. UK & Ireland Woodturning Symposium http://www.ukiws.co.uk/ Christmas Ornament Challenge Playlist https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Steve French https://www.youtube.com/user/blockyimage/videos Douglas - Retro Weld https://www.youtube.com/channel/UC8NjHgDV5nHEfQGj7JNfp9Q/featured Tom Jensen T-Toys & UFO's https://www.youtube.com/channel/UC8XZ

 

Near Miss - Finish turning of a rough turned coffee tree bowl ·
By: H F Bowern Designs - Harold Bowern
November 19, 2015 · 858 views

Welcome back ! Today Ia going to finish up the coffee tree rough turned bowl blank I did back in August. It has about 18 - 13 % moisture content. I had stored the rough turned blank in shavings and a paper bag. A bit of an interesting turn as the lip has quite a good section of live edge bark left on it and the blank is out of round in shape. So turning at a moderate speed was necessary. I used a combination of bowl gouges and carbide tools to turn the blank into final shape. I call this bowl 'Near Miss', as when I did the photos, that I show at the end of the video, I seen that I had alm

 

Re Mounting and Finishing Off a Walnut Bowl ·
By: Peter Matthew
October 22, 2015 · 319 views

Hello Everyone! I know that today's video was going to be on sharpening a bandsaw blade, but that didn't work out. Instead, you guys get how to remount a bowl for finish turning. Thanks for watching! ---------------------------------------------------------------------------------------------------------------- If you would like a Peter Matthew Shop Sticker, please shoot me an email! Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080 Hidden Agenda by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1200102 Artist: http://incompetech.com

 

RM Set up finishing your bowls ·
By: Peter Merritt
July 13, 2015 · 266 views

Finishing your Ring Master projects

 

Finishing a Small Rough-Turned Hollow Form ·
By: WYOMINGWOODTURNER
July 01, 2015 · 3,486 views

In this 'sister' video to Finishing the Foot of a Small Hollow form, Sam takes a hollow form that has been rough-turned and dried, and takes the viewer through the steps to its completion.

 

Finishing the Foot of a Hollow Form with Sam Angelo ·
By: WYOMINGWOODTURNER
June 29, 2015 · 1,860 views

In this short video Sam completes the foot of a small hollow form.

 

Finish Turning Cedar Bowls ·
By: Steve Lindsley
June 05, 2015 · 27,703 views

In this video I finish turn a couple of cedar bowls that I roughed out 10 months ago. They have been ready for some time but I'm just now getting to them. One gave me some problems that required a design modification during the process. In the end I'm very pleased with the way they both came out. One has been returned to my co-worker, Ellen, so she can return it to her mother who gave me the log in the first place. I hope you enjoy the video. Comments are always welcome.

 

FINISH CUTS with GOUGES by Reed Gray aka Robo Hippy ·
By: robohippy
May 05, 2015 · 5,502 views

After turning literally thousand's of bowls, Robo Hippy shares some important tips on Finish Cuts with Gouges.

 

Mounting a Dried Core for Finish Turning ·
By: Bob Hamilton
March 30, 2015 · 5,257 views

This video shows the method I use to re-mount a dried core that does not have a tenon on it in order to do the finish turning.

 

Finish Turning Walnut Bowl ·
By: Peter Matthew
March 13, 2015 · 191 views

Sorry, the bowl sold :) My eBay store: http://www.ebay.com/usr/dste6080

 

Woodturning - How to get a great surface finish on a walnut bowl ·
By: The Woodturning Store
March 08, 2015 · 24,614 views

In this video, I show some close-up cuts of the 'push cut' will results in a great surface finish on the outside of a bowl. Watch Woodturning How-To videos with Steve Fulgoni at The Woodturning Store. Steve shows woodturning tips, turning techniques, woodturning product reviews and support for Hurricane Turning Tools and Robust Lathes. Please subscribe to The Woodturning Shop and send me any comments or suggestions. Check out my website at: http://www.thewoodturningstore.com or http://www.woodturner.co. On my website you will find Hurricane Tools and Chucks, Projects Supplies and I am also an authorized dealer for Robust Lathes and tools Steve turns on a Robust American Beauty Lathe and uses Hurricane Turning Tools

 

Naked Turner Finishing Poplar Plate Bowl ·
By: Erik Anderson
February 14, 2015 · 1,456 views

Finishing a Poplar Plate Bowl

 

FINISH CUTS: PUNKY MAPLE & FIGURED MYRTLE with Reed Gray aka Robo Hippy ·
By: robohippy
February 11, 2015 · 3,179 views

Robo Hippy works with some challenging varieties of wood

 

Ted Sokolowski Finesse Scrapers: How to Clean-up Your Forms & Add a Great Finish to Your Woodturning ·
By: Ted Sokolowski
February 04, 2015 · 2,549 views

Using finesse scrapers can add a sense of volume, fluidity, & sensuality to your woodturning. This video debunks the myth that scraping is 'taboo' in woodturning. These woodturning chisels will change the way you woodturn and improve your overall designs. They will speed up your sanding process and create clean forms without the fear of a catch or dig-in.

 

Robo Hippy Presents FINISH CUTS: Punky Maple ·
By: robohippy
January 19, 2015 · 2,004 views

Reed shares some great tips on working with really difficult wood such as this piece of punky maple.

 

The Finishing of King V ·
By: Paul Crabtree
December 22, 2014 · 280 views

Many months of drying and caring for, King V is now ready to finish. I look at what the overall condition is, what needs to be done and how to do it.

 

Finish Turning a Cherry Bowl. ·
By: Adze Woodturning
December 15, 2014 · 405 views

Final turning of Cherry wood bowl and application of Walnut Oil and Bees Wax

 

Finishing Natural Edged Oak Bowl ·
By: India indian
September 16, 2014 · 11 views

 

Wood Turning - Finishing a rough turned Ash Bowl ·
By: Mike Waldt
August 09, 2014 · 144,500 views

I finish an Ash bowl that I wet turned about 5 months ago. Baconsoda's Channel: https://www.youtube.com/channel/UCYpB76ZuKxcbFQnc8VmNpNQ Guitar by Michael Berk https://www.youtube.com/user/mikeberk810

 

Finished turning natural edge ash bowl # part two ·
By: Robbiethewoodturner
April 02, 2014 · 19,986 views

MY BLOG.http://robbiethewoodturner.net/.Hi all here is the second video of wet turning a natural edge bowl from ash. I have put the bowl in a bucket of washing liquid for 5 days to soak.. I then left it to dry a little for 1 day put it back on the lathe for finishing Hers my toughs on this process. use yellow washing liquid green discolours the wood its is a brilliant way of getting a finish on difficult woods.There was some movement in the bowl but not enough to cause cracking. The bowl has dried now and is in the house no cracking it was turned from green on 17 march 2 of April today and it is dry except the bark it is a little soft you can only use oil or wax for finishing as the washing liquid causes problems with the finish

 

Finish Turning a Small Elm Bowl ·
By: Steve Lindsley
March 23, 2014 · 19,965 views

Back in June 2013 my friend and co-worker, Scott, gave me a couple of elm logs. I cut them into bowl blanks and rough turned them to shape (the subject of a previous video). The blanks have dried and are ready to finish turn. In this video I finished a small, shallow bowl that would make a nice candy dish or something similiar. It was a lot of fun. I hope you enjoy the video. Comments are always welcome.

 

#25 Bowls from Logs, Part 5 Finishing the Boiled Walnut Bowl ·
By: Stephen Ogle
March 06, 2014 · 47,724 views

The last of my Bowls from Logs series. I finish the boiled Walnut bowl. Showing my process for knowing when the bowl is dry, and I get to finally use my shop made vacuum chuck.

 

Finishing Wine Glasses ·
By: Paul Crabtree
February 18, 2014 · 368 views

Lathe hollowing tools. 'Finishing Wine Glasses' How to finish wine glasses using the lathe and some sanding aides.

 

#22 Bowls from Logs Part 4 Finishing Natural Edged Oak Bowl ·
By: Stephen Ogle
February 15, 2014 · 12,292 views

Finish turning my Natural Edged White Oak Bowl, roughed out previously from a green log.

 

woodturning projects finishing a dry rough turned bowl blank ·
By: Robbiethewoodturner
January 09, 2014 · 11,775 views

here is a demonstration on how to finish turning bowl blanks after they have being wet turned and and left to dried.Here is a link to my new web blog site i hope to up date with more photo http://robbiethewoodturner.netwoodturning projects finishing a dry rough turned bowl This video was produced and made by Robbie power Copyright All Rights Reserved

 

Tournage sur bois: Finition d'un grand bol - Woodturning: Finishing a large bowl ·
By: Laurent Cortot
November 08, 2013 · 1,940 views

Reprise et finition d'un grand bol après trois mois de séchage. Recovery and finishing a large bowl after three months of drying. Mon blog: http://lolotourneur.blogspot.com/ Ma page facebook: https://www.facebook.com/pages/Lolo-tourneur/350100615098949?notif_t page_new_likes

 

Tournage sur bois: finition un saladier. Woodturning: Finishing a bowl ·
By: Laurent Cortot
October 12, 2013 · 2,418 views

Reprise d'une ébauche de bol après 3 mois de séchage. Mon blog: http://lolotourneur.blogspot.com/ Ma page facebook: https://www.facebook.com/pages/Lolo-tourneur/350100615098949?notif_t page_new_likes

 

Finishing a Roughed Turned Bowl - Woodturning using Cole Jaws and Vacuum Chuck on a Robust Lathe ·
By: The Woodturning Store
September 06, 2013 · 30,018 views

In this 40 Minute HD video I cover how to finish a bowl which has been previously rough turned and allowed to air dry. I am using my Robust American Beauty lathe and Hurricane turning tools. I start off with Cole/Jumbo jaws and finish up with a vacuum chuck. I let the cameras roll 'live' without much editing as if this were a demo at my club. I hope you enjoy and can last through the entire 40 minutes. Let me know if you think the videos would be better if they were shorter. Please subscribe to my channel and send me any comments or suggestions. Check out my website at: http://www.thewoodturningstore.com or http://www.woodturner.co. On my website you will find Hurricane Tools and Chucks, Projects Supplies and I am also an authorized dealer for Robust Lathes and tools

 

Finishing a Natural edge Bowl: part 4 ·
By: WYOMINGWOODTURNER
May 26, 2013 · 7,213 views

Sam takes a cored box elder bowl and finishes it inside and out. this is part 4 of a 4 part series. Natural edge bowls: part 4

 

Finish-turning a Natural Edge Chinaberry Bowl ·
By: Chas Thornhill
March 23, 2013 · 101,777 views

In this video I finish-turn a large natural edge chinaberry bowl. The bowl was rough-turned over a year ago. I show a few techniques I use to re-mount large or deep objects after drying. And I discuss my favorite finishing technique of wet sanding bowls with oil. Thanks to everyone who has subscribed to me over the past few months. Now that I know this editing software a little bit, I hope to have my videos out a little quicker. If you have questions about anything you see in this video, send me an email. I am happy to provide more information if I have it.

 

1 - Turning, Finishing & Texturing - John Benton - 5 Feb 2008 ·
By: Waxhaw Woodturners
January 21, 2013 · 3,962 views

Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Rich Hansen.

 

Mahogany box 5: Finishing the box ·
By: Bob Hamilton
January 19, 2013 · 9,018 views

This video was recorded in September, 2011. I just never got around to editing and uploading it then. It is a small decorative box made from mahogany with an ebony finial due to a 'design opportunity'. There are 5 segments with a total run time of about 94 minutes.

 

2012-10-11 Finish Turning a Platter by Jimmy Rocker GWA Turners SIG (1h06m37s) ·
By: Gwinnett Woodworkers
January 18, 2013 · 3,797 views

Turners SIG Class 10-11-12 Jimmy Rocker finish-turns a platter rough-turned and allowed to dry from a previous class. Demonstraton includes cutting a round, dovetailed mortise to facilitate the use of expansion chucks. He also shows alternatives including the use of double-stick tape and glue blocks. Full Video (1:06:37) Filmed and uploaded in HD.

 

FINISH the FOOT of a TURNED BOWL ·
By: WYOMINGWOODTURNER
January 05, 2013 · 19,522 views

Sam demonstrates how to 'reverse' chuck a lathe-turned piece. He removes the tenon from the bottom of a bowl and shows how to finish the base mostly by turning it.

 

Finishing hybrid blanks ·
By: George Watkins
December 07, 2012 · 5,100 views

I created this video to show three different ways to finish the Hybrid blanks which I make and sell. http://www.fromthetree.co.uk/ polishing mops and compounds are available from http://www.thepolishingshop.co.uk

 

Finishing Top for the Urn ·
By: naturaledge42
July 31, 2012 · 220 views

After having the first lid and backer board fly off the lathe because of a catch. Now we use a solid backer board to finish the top of the urn.

 

Rotary Table Bowl - Part 3 - Finishing the Foot ·
By: SegmentedTurner
May 02, 2012 · 3,451 views

I describe considerations in remounting this bowl on the lathe and show the foot being turned.

 

woodturning projects finishing a dry rough turned bowl ·
By: 207 Made
April 30, 2012 · 1,072 views

https://www.facebook.com/pages/Spencers-Wooden-Creations/112917125483794

 

Finish turning a roughout Part 2 ·
By: Bob Hamilton
April 19, 2012 · 3,600 views

This is the second part of a two part video about finish turning a dried bowl roughout.

 

Finish turning a roughout Part 1 ·
By: Bob Hamilton
April 19, 2012 · 6,202 views

This is the first of two parts about finish turning a dried bowl roughout. I apologize for the annoying stutter in the audio track. I can't figure out how to correct it.

 

Woodturning Walnut Bowl - Turn Green, Dry Rough then Finish Woodturning ·
By: As Wood Turns
March 13, 2012 · 9,884 views

http://www.AsWoodTurns.com Some time ago, I obtained some walnut from a builder who had cleared some land for homes. I promptly sawed the wood into manageable chunks and sawed each piece into halves through the pith. I coated each cut surface with a wax emulsion. I turned much of the wood soon thereafter, recoated each piece with the wax and placed each into a paper bag on a shelf in my shop. Then work demands peaked and I could not get back to the finish turning. Now several years later, I pulled it from its paper sack. It was a dry as it was going to ever be. And it was so beautiful even a

 

Part 3 - Making a Segmented Bowl - Finishing ·
By: SegmentedTurner
January 05, 2012 · 88,185 views

I show the finish-turned bowl and how I mount it to turn the base.

 

Coring backwards5: Finish turning the bowl ·
By: Bob Hamilton
September 27, 2011 · 4,772 views

This is the fifth segment of six of a companion video for my article 'Coring backwards' about constructing a bowl blank from rings parted from a board on the lathe.

 

Woodturning with the Tracy Owen Finishing Tools ·
By: Craft Supplies USA
August 05, 2010 · 12,138 views

In this woodturning video, we'll show you how to shear scrape with the Tracey Owen Finishing Tools. Buy now: https://www.woodturnerscatalog.com/p/129/4468/Henry-Taylor-Tracy-Owen-Finishing-Tool?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Tracy Owen Fine Finishing Tools offer a truly innovative approach to maximizing the benefits of shear scraping. It's no secret that properly done, shear scraping can produce a silky smooth finished surface more consistently than any other turning method. In fa

 

Surface Enhancements Part 2 - Finishing ·
By: SegmentedTurner
January 01, 2010 · 3,812 views

This is the second of two videos showing how I apply color to an area of pyrography on one of my woodturnings. For more information about my work please visit my web site at http://www.DWMontville.com.

 

Berger scoop segment 7 of 7 - Finishing the scoop ·
By: Bob Hamilton
December 29, 2009 · 5,792 views

This is my attempt at turning a scoop like the one Soren Berger demonstrates in the video under the AAW tab at: http://www.woodworkingchannel.com/dolphin/vidego_video_library.php My main purpose in making this was to demonstrate an alternative chucking method for hollowing the scoop.

 

Berger scoop segment 4 of 7 - Finishing the spindle turning ·
By: Bob Hamilton
December 29, 2009 · 5,967 views

This is my attempt at turning a scoop like the one Soren Berger demonstrates in the video under the AAW tab at: http://www.woodworkingchannel.com/dolphin/vidego_video_library.php My main purpose in making this was to demonstrate an alternative chucking method for hollowing the scoop.

 

True Economy 7 - Finish turning inside ·
By: Bob Hamilton
September 30, 2009 · 21,469 views

This is segment #7 of 9 of a companion video for my article on turning a bowl from a board. The illustrated article as well as other articles are located on my website at: http://bobhamswwing.com/index_of_articles.htm

 

No Chuck Bowl Segment 13 - Finishing the bottom ·
By: Bob Hamilton
April 02, 2009 · 7,242 views

This is segment 13 of 13 of the companion video for the pictorial article on my website at: http://bobhamswwing.com/my_woodworking.htm . My apologies for the video quality of this segment. I did not realize that the camera had locked its focus on my arm when I was turning it on so most of this one is out of focus. I think it is clear enough to see pretty much what is happening, though.

 

No Chuck Bowl Segment 8 - Finish turning the inside ·
By: Bob Hamilton
April 02, 2009 · 6,721 views

This is segment 8 of 13 of the companion video for the pictorial article on my website at: http://bobhamswwing.com/my_woodworking.htm

 

Return to Turning Videos

Great Bargains


Heavy Duty Live Center

On Sale for only $16.53

List Price: $19.95

Click here for more information or to purchase

 


Dremel Rotary Tool Kit

On Sale for only $139.00

Save $60.99 (30%)

List price: $199.99

Click here for more information or to purchase


Roller Stand

On Sale for only $23.79

Save $6.11 (20%)

List Price: $29.90

Click here for more information or to purchase

 


Easy Wood Tools - Easy Start Rougher + Finisher + Detailer

On Sale for only $159.99

List price: $206.97

These tools have the smaller 9" maple handle and are 12.5" overall.

Click here for more information or to purchase


NOVA 48232 G3 Reversible Wood Turning Chuck

On Sale for only $99.00

Save $60.99 (38%)

List price: $159.99

Click here for more information or to purchase

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Carter Products
Robust Tools
Sheffield Woodturning

(Click any Ad to go to our Sponsor's Website)