Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Resin Turning Videos (172)

Sort by

Or click here to: Search All Videos


My Second Alumilite Project - Part 5
By: Ron Calverley
May 27, 2018 · 526 views

I've just started using Alumilite and still on a learning curve.

 

My Second Alumilite Project - Part 4
By: Ron Calverley
May 26, 2018 · 515 views

I've just started using Alumilite and still on a learning curve.

 

Making - The Pencil Planet Sphere - *Warning Flashing Images*
By: Nick Zammeti NZ WoodTurning
May 25, 2018 · 18,456 views

**** Warning **** .........This video contains flashing images and video clips........ NEW PRESSURE POT https://www.sprayequipment.co.uk/ FOLLOW ME ON INSTAGRAM https://www.instagram.com/nzwoodturning/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.recordpower.co.uk/ WOODW

 

Robinair Vacuum Pump and Seelavac Vacuum Chamber Unboxing and Overview
By: John Clothier
May 25, 2018 · 335 views

In this video I unbox a 3CFM Robinair Vacuum Pump and Seelavac Vacuum chamber. I provide an overview of them, and show you how to get setup and started. I purchased both of these items from www.hvacstore,co.uk for a 10% discount off all purchased from this site (Valid as at time of uploading this video) please use the following discount code johnclothier John Clothier is proudly supported by ____________________ Hampshire Sheen - for finishing products https://www.hampshiresheen.com/ Metal Clay - for Resin http://www.metalclay.co.uk/ Yorkshire Grit - for Abrasive Paste http://yorkshir

 

Paper Honeycomb & Alumilite Amazing Clear
By: dc9apu
May 25, 2018 · 311 views

This video is about Paper Honeycomb & Alumilite Amazing Clear

 

Part 2 B Mixed media pen
By: Gabe Castro
May 25, 2018 · 96 views

Part 2-B, Mixed Media Segmented Cigar Pen , 'Cloths Pen' not your traditional segmented material used on this one.

 

My Second Alumilite Project - Part 3
By: Ron Calverley
May 24, 2018 · 653 views

I've just started using Alumilite and still on a learning curve.

 

Wood turning - Australian Banksia pod and resin bowl!
By: CraftWithAfshin
May 19, 2018 · 1,120 views

Currently up for sale on my ebay shop: https://www.ebay.co.uk/itm/282973175132?ssPageName STRK:MESELX:IT&_trksid p3984.m1555.l2649 ---Please also check out these wonderful wood turners--- Mike Waldt : https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w RickTurns : https://www.youtube.com/channel/UCghK0Pjzr5YaZK2SlC2Dftw Carl Jacobson : https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Stuart Arts : https://www.youtube.com/channel/UCrux70rjZflDA6-ypvaH8DQ Heath Knuckles:https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ Aleksey Bek : https://www.youtube.com/channel/UCz-h

 

How To Set Up A TCP Global Pressure Pot for Resin Casting
By: Casey Martin
May 19, 2018 · 581 views

Please Like, Comment, and Subscribe! Let me know what you all think! Link to this pressure pot: https://www.amazon.com/gp/product/B00KFT5A3S/ref oh_aui_search_detailpage?ie UTF8&psc 1 http://www.tcpglobal.com/TCP-PT8320.html#.WwBglC_Myu4 My blanks: https://www.etsy.com/shop/WineCountrywoodwork OR https://winecountrywoodworks.com/ Please like, subscribe, and leave a comment everyone! My pens: https://www.winecountrypens.com My email for questions or business inquiries: casey@winecountrypens.com

 

Hybrid Resin And Cypress Lidded Box
By: Carl Jacobson
May 18, 2018 · 7,227 views

In this video I turned a hybrid resin and Cypress wood lidded box. Check out Doug's Instagram he's really casting some cool blanks. Doug Bowden https://www.instagram.com/bmm_workshop/ I put together a list of some of the tools I use in my shop (affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link: https://www.amazon.com/shop/thewoodshoptv TOOLS I USED IN THIS VIDEO: Robust lathe Easy Wood Tools Easy Wood Chuck Thompson Lathe Tools Sandpapper Micro-Mesh Howard beeswax Face Shield Forstner Bit RZ Mask Carolina Shoe: https://www.carolinashoe.com/Pr

 

Making A Pen from Colored Pencils & Alumilite Resin
By: Casey Martin
May 14, 2018 · 927 views

Please like, comment and subscribe everyone! Etsy Listing to buy these blanks: https://www.etsy.com/listing/612479209/colored-pencil-pen-blanks?ref listings_manager_grid My blanks: https://www.etsy.com/shop/WineCountrywoodwork OR https://winecountrywoodworks.com/ Please like, subscribe, and leave a comment everyone! My pens: https://www.winecountrypens.com My email for questions or business inquiries: casey@winecountrypens.com Music: Adventures by A Himitsu https://soundcloud.com/a-himitsu Creative Commons — Attribution 3.0 Unported— CC BY 3.0 http://creativecommons.org/licenses/b... Music released by Argofox https://youtu.be/8BXNwnxaVQE Music provided by Audio Library https://youtu.be/MkNeIUgNPQ8

 

Acrylic Paint Pouring On A Wood Bowl / Mobile Shop At Crater Lake
By: Carl Jacobson
May 11, 2018 · 8,281 views

We took the mobile shop to Crater Lake to film this project. This is a must see if you make it to Oregon. We tried a technique called paint pouring to decorate the outside of this bowl. I put a few links below to some videos that better describe this process. The bowl is Box Elder and is about 9' x 5'. We found this channel after we got the project done. He describes it much better :) DeadTreeWoodWorks https://www.youtube.com/channel/UChI-G-uXicU2VeJOrTNcyng Paint pouring https://www.youtube.com/watch?v 5RcVW4Bya3k I put together a list of some of the tools I use in my shop (affiliate) lin

 

The Hybrid Knuckameti Sphere - ''Men in Black Galaxy''
By: Nick Zammeti NZ WoodTurning
May 11, 2018 · 50,257 views

FOLLOW ME ON INSTAGRAM https://www.instagram.com/nzwoodturning/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw Heath Knuckles https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.recordpower.co.uk/ WOODWAX 22 & SANDING SEALER http://www.chestnutproducts.co.uk/ TRITON TOOLS http://www.trito

 

Woodturning - The Coloured Pencil Explosion Sphere ... Pt 2
By: Andy Phillip
May 11, 2018 · 15,460 views

Turning a sphere using alumilite clear resin with a coloured pencil explosion floating inside ..The pencils didn't 'PING' as much as I had hoped I think the spherical shape makes the colours seem like they've blended but its still pretty cool .. thanks for watching http://www.houseofresin.co.uk/ https://www.etsy.com/uk/shop/AndyPhillipHandmade https://www.instagram.com/andyphilliphandmade/?hl en

 

Casting Fir Pine cone in Alumilite amazing result!
By: CraftWithAfshin
May 05, 2018 · 763 views

Hey guys today i turned my first ever casted fir cone pen it turned out better than i expected I hope you like it too! *Apologies pronounced 'Haggins' wrong. Zac Higgins: https://www.youtube.com/user/NVWoodwerks/videos?disable_polymer 1 ---Please also check out these wonderful wood turners--- Mike Waldt : https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w RickTurns : https://www.youtube.com/channel/UCghK0Pjzr5YaZK2SlC2Dftw Carl Jacobson : https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Stuart Arts : https://www.youtube.com/channel/UCrux70rjZflDA6-ypvaH8DQ Heath Knuckles:htt

 

Woodturning - The Coloured Pencil Explosion Sphere ... Pt 1
By: Andy Phillip
May 04, 2018 · 9,611 views

Turning a sphere from coloured pencils and clear resin (hopefully) I had a lot of comments on the coloured pencil explosion bowl saying I should have used clear resin which I agree with .. but instead of another bowl I decided to make it even more difficult and turn a sphere with the exploding pencils floating in the center .. wish me luck !! http://www.houseofresin.co.uk/ https://www.etsy.com/uk/shop/AndyPhillipHandmade https://www.instagram.com/andyphilliphandmade/?hl en Music Phase Three by Huma-Huma Faith by Vibe Tracks

 

7 Things I Wish I Knew Before Resin Casting Alumilite
By: Casey Martin
April 29, 2018 · 2,241 views

Hope you guys like the video and let me know what you think! I wanted to provide some things I learned the hard way to help everyone out if they start resin casting or already are. My blanks: https://www.etsy.com/shop/WineCountrywoodwork OR https://winecountrywoodworks.com/ Please like, subscribe, and leave a comment everyone! My pens: https://www.winecountrypens.com My email for questions or business inquiries: casey@winecountrypens.com

 

Wood turning - Hybrid Mallee burl & Alumilite resin lidded box for Giveaway!
By: CraftWithAfshin
April 29, 2018 · 1,161 views

---Giveaway end on 6th May 2018 Have 'giveaway' in your comment to enter, its just so that people who dont want to participate can still comment without entering --- I wont be able to replay to comment consider my 'heart' sign next to your comment as thank you! To skip to turning part go to 10:44 thank you all for watching.

 

Making: The Wishing Machine - The Greatest Showman!
By: Nick Zammeti NZ WoodTurning
April 27, 2018 · 18,813 views

I watched The Greatest showman and was so inspired by this film, I just had to make something from the film. Its the wishing machine. This film is such a great film. i would recommend anyone to go and see it. MAKERS CENTRAL WEBSITE https://goo.gl/x3yVjm MY WEBSITE http://www.nzwoodturning.co.uk/ FOLLOW ME ON INSTARGRAM https://www.instagram.com/nzwoodturning/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channe

 

Secret bowl inspired by peter brown..
By: JR turn it around
April 26, 2018 · 239 views

A secret bowl inspired by peter browns video.. thanks and hope you enjoy.... Peters video (https://youtu.be/1MXO7IUvX5w) Yorkshire grit http://yorkshire-grit.com/ Sanding sealer https://chestnutproducts.co.uk/product/cellulose-sanding-sealer/ Woodwax 22 https://chestnutproducts.co.uk/product-category/waxes/ lathe and tools and chuck http://www.recordpower.co.uk

 

My Second Alumilite Project - Part 2
By: Ron Calverley
April 23, 2018 · 726 views

I've just started using Alumilite and still on a learning curve.

 

Resin Casting and Turning a 3D printed pen blank.
By: Chad Schimmel
April 22, 2018 · 1,671 views

In this video I show you how I resin cast and turn a 3d printed pen blank, This is an overview and not an in depth tutorial. What I used in this video- Liquid Diamonds Resin from Turners Warehouse, http://goo.gl/3NCt2m Casters Choice Mica Powder, Bronze and Plum Crazy Purple http://goo.gl/eaQ9fD Small Pipettes https://amzn.to/2HkX6Ak Turned the blank with BlackLine tools https://shop.localwoodwork.com/p/blackline-tools PLEASE LIKE AND SUBSCRIBE!!! For Pen making and turning supplies, tools and more please check out www.turnerswarehouse.com Here are the tools and equipment I us

 

Resin Pod / I need some help coming up with a stand idea.
By: Carl Jacobson
April 20, 2018 · 6,628 views

Check out my gear on Kit: https://kit.com/CarlJacobson Jared from Lizard Blanks brought over this cool resin blank that Doug from the Bearded MadMan Workshop cast. Bearded MadMan Workshop https://www.instagram.com/bmm_workshop/ Lizard Blanks https://www.lizardblanks.com/ DJ at SoCoMoWoodwork https://www.youtube.com/channel/UCCxyDRJwJ9_6OJw0Ce48Prw/featured Carolina Shoe: https://www.carolinashoe.com/Products?page 1&gender Mens&sorting Popularity Use Carolina10 at checkout for a discount. Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order I p

 

Experiment with Pouring Medium
By: Gord Rock
April 17, 2018 · 1,602 views

I was told this Pouring Medium was a good candidate to use instead of Epoxy or Resin. I had to find out for myself if this was true! My email address for sending sticker scans: gjrock@telus.net

 

Resin and Pinecone
By: SCCFORUM
April 16, 2018 · 135 views

A little project for the lathe.

 

My Second Alumilite Project - Part 1
By: Ron Calverley
April 16, 2018 · 560 views

I've just started using Alumilite and still on a learning curve.

 

woodturning - mixing resin cubes to make a small funky vase!
By: Nick Zammeti NZ WoodTurning
April 13, 2018 · 32,034 views

This project was inspired by a subscriber, which is really cool. I mixed up lots of different colored resin cubes/circles and then placed them in another load of resin to make this funky vase. MAKERS CENTRAL WEBSITE https://goo.gl/x3yVjm MY WEBSITE http://www.nzwoodturning.co.uk/ FOLLOW ME ON INSTARGRAM https://www.instagram.com/nzwoodturning/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ CHARLIE THE MAKER https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I

 

Woodturning - Experiment with resin and wood - Butternut lidded box with resin insert
By: H F Bowern Designs - Harold Bowern
April 12, 2018 · 2,616 views

Welcome Back! This week I am continuing my journey through Resins and Woods. I am making a lidded box out of some Butternut and using a layered Art Resin insert as a feature for the lid. The insert was made using Art Resin and Pearl Ex powered pigments poured in layers with small metal cogwheels inserted into one of the layers. Then I put a final layer of clear resin over that to encapsulate the cogwheels. What I learned was a bit more about the way to make the Art Resin insert shine, and that was by adding more resin over the insert, and in this case over the top edge of the box lid. I ro

 

My First Alumilite Project - Part 5
By: Ron Calverley
April 08, 2018 · 820 views

I've never used Alumilite before, but have heard a lot of positive things about it.

 

My First Alumilite Project - Part 4
By: Ron Calverley
April 07, 2018 · 756 views

I've never used Alumilite before, but have heard a lot of positive things about it.

 

My First Alumilite Project - Part 3
By: Ron Calverley
April 06, 2018 · 678 views

I've never used Alumilite before, but have heard a lot of positive things about it.

 

woodturning - mixing resin & potpourri together
By: Nick Zammeti NZ WoodTurning
April 06, 2018 · 102,118 views

So i'm bringing back Christmas with this mixed resin and potpourri pot/bowl. this was quite a fun project as i love xmas so much . lol. Enjoy! MAKERS CENTRAL WEBSITE https://goo.gl/x3yVjm MY WEBSITE http://www.nzwoodturning.co.uk/ FOLLOW ME ON INSTARGRAM https://www.instagram.com/nzwoodturning/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ CHARLIE THE MAKER https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/akti

 

Faux Resin Hybrid ? / Second Road Trip In The Mobile Shop
By: Carl Jacobson
April 06, 2018 · 8,707 views

We decided to go to Crown Point for our second mobile shop video. Crown Point overlooks the Columbia river along the scenic highway. Jared from lizard Blank cast this amazing resin blank. Scott Grove https://www.youtube.com/watch?v oqmXi2roPsU Lizard Blanks https://www.lizardblanks.com/ Jamie Page https://www.youtube.com/channel/UCw3hBDXx_L_EoSFqqmEuWJQ Jake Thompson https://www.youtube.com/user/chevelledaddy1 I put together a list of some of the tools I use in my shop (affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link: https://www.amazon.c

 

My First Alumilite Project - Part 2
By: Ron Calverley
April 05, 2018 · 636 views

I've never used Alumilite before, but have heard a lot of positive things about it.

 

The Test Mixture - Part 3 (conclusion)
By: Ron Calverley
April 04, 2018 · 587 views

Making my own homemade acrylic pen blank.

 

The Test Mixture - Part 2
By: Ron Calverley
April 03, 2018 · 599 views

Making my own homemade pen blank.

 

The Test Mixture - Part 1
By: Ron Calverley
April 02, 2018 · 699 views

Making my own homemade pen blank.

 

My First Alumilite Project - Part 1
By: Ron Calverley
April 01, 2018 · 712 views

I've never used Alumilite before, but have heard a lot of positive things about it.

 

Preview- Banksia pod and dried cactus veins
By: Chad Aubuchon
March 29, 2018 · 26 views

Decided to cast a piece of banksia pod and dried cactus veins at the same time using different colors, 2 birds with one stone. This is just a preview of me casting them. Will post separate videos of turning both the blanks... Overworld Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

#6 An introduction to acrylic pouring
By: Tony Walters
March 27, 2018 · 51 views

In this video I thought I would show you something I have been playing with called acrylic pouring. The basic premise is to pour acrylic... well duh! by using additives you can change the viscosity of the paint to help it flow across a canvas better. I mentioned that I did some research and found mixed media girl(https://www.youtube.com/channel/UCW9uWgnhC-mvNI0a6D-n5cw) useful. So in terms of how life is going I visited the gallery holding the photography exhibit and of the two photos they had sold in the first few days mine was one of them! Super pleased as I didn't think any would sell. More

 

Preview: Epoxy resin and Cherry wood bowl
By: The Apartment Woodturner
March 25, 2018 · 29 views

Using epoxy resin slightly tinted with color and cherry wood to make a stunning bowl.

 

Resin & Pinecone.
By: SCCFORUM
March 25, 2018 · 164 views

An enjoyable day of turning. The keyring is all Alumilite resin.

 

Red and Black Textured Platter Rim
By: Stewart Furini
March 24, 2018 · 1,065 views

Black and red - a classic combo! With texturing thrown in too! What's not to like? I hope this inspires some of you to try out some of the techniques. Be ware of the rim transition though....this needs some work still. Since shooting the video, I've tried out some ideas for improving the transition from the rim to the bowl - I've done a blog post about it here - https://www.stewartfuriniwoodturning.co.uk/blog Sticker links Yuval - https://www.youtube.com/user/yuvallahav Sean - https://www.youtube.com/channel/UCLePcIl_sTOhcqt2IP0x5NQ Please be aware that woodturning is a hazardous activity. These videos are only intended to show you what I do - they are not tutorials. - - - - - - Please watch: 'Hot Pink Crackle Rim' https://www.youtube.com/watch?v Lg--XGuvP8s - - - - - -

 

woodturning - the resin faberge egg! - Easter Came Early.
By: Nick Zammeti NZ WoodTurning
March 23, 2018 · 27,450 views

MAKERS CENTRAL WEBSITE https://goo.gl/x3yVjm MY WEBSITE http://www.nzwoodturning.co.uk/ FOLLOW ME ON INSTARGRAM https://www.instagram.com/nzwoodturning/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.recor

 

H F Bowern Designs Sapele and Resin Box Fail
By: H F Bowern Designs - Harold Bowern
March 21, 2018 · 153 views

Welcome Back! I wanted to share have my failure at my second attempt at casting resin. Lots to learn from in this attempt. Maybe the Sapele was not dry enough before I cast it or maybe I should have stabilized it first. It’s also my first attempt at gluing up a ” corrugated plastic to make the mold. The results FAILURE!!!! The mold leaked along the base of the hot glue seam. No resin seemed to come from sides or over the top. I had air bubble on the top surface of the Sapele blank. I will have to look at what I did wrong and then see if I can fix this or simply use it as

 

Resin, polymer clay and Redwood.
By: SCCFORUM
March 19, 2018 · 114 views

This is just a test piece. I have used the roundel design for the RAF benevolent fund. Roundel made from polymer clay set in Redwood. The wood is fantastic to turn. The pill box is from Prokraft.

 

H F Bowern Designs Ash bowl resin and powders
By: H F Bowern Designs - Harold Bowern
March 17, 2018 · 601 views

Welcome Back! This piece was inspired by Martin Saban- Smith use of cogwheels in his Steampunk work and a local Ontario woodturner Dave Bell who combines wood with resins to create not only fabulous pieces of wood art, but blanks for peppermills, bottle stoppers and pens. Yes, I have started down the very slippery slop of adding resin to woodturning. ……Beam me up Scotty!! In this video I have a small bowl blank, 8 1 /4” in diameter and approx. 2 inches thick, of Ash, which I turned and cut a recess to fill with a combination of ArtResin and Pearl Ex pigment powders. This is my first e

 

Small Maple burl & resin box.
By: SCCFORUM
March 16, 2018 · 129 views

Hi All, I lost the footage of the rough turning so it is a bit of an odd start. The wood is Maple burl. Alumilite resin with Ocean blue. The hinge is from Prokraft.

 

woodturning - what to make with these resin blanks?
By: Nick Zammeti NZ WoodTurning
March 16, 2018 · 29,136 views

CHARLIE THE MAKER https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw MAKERS CENTRAL WEBSITE https://goo.gl/x3yVjm MY WEBSITE http://www.nzwoodturning.co.uk/ FOLLOW ME ON INSTARGRAM https://www.instagram.com/nzwoodturning/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.recordpower.co.uk/ WOODWAX 2

 

The Pressure Pot and the Crystal Skull - and a bronze one too !
By: Jim Overton - Jimson's Stuff
March 10, 2018 · 3,663 views

This is the 2nd in a series of videos exploring pressure and vacuum when casting and mould making. In this video I use a 20 litre pressure pot to give bubble free castings of a skull carving I made. My name is Jim Overton, welcome to my channel. Thanks for watching. Please like, share and subscribe. The pressure pot came from sprayequipment.co.uk www.sprayequipment.co.uk https://www.sprayequipment.co.uk/resin-casting-pressure-tanks/resin-casting-pressure-tanks.html All the mould making and casting materials came from MBFG in Belfast www.mbfg.co.uk They do many different casting resins, with

 

woodturning - a bowl using just epoxy resin & wire!
By: Nick Zammeti NZ WoodTurning
March 09, 2018 · 60,359 views

MAKERS CENTRAL WEBSITE https://goo.gl/x3yVjm MY WEBSITE http://www.nzwoodturning.co.uk/ FOLLOW ME ON INSTARGRAM https://www.instagram.com/nzwoodturning/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.recor

 

H F Bowern Designs Final resin pour on panels and molds
By: H F Bowern Designs - Harold Bowern
March 07, 2018 · 105 views

Welcome Back! This is just a short video showing how I am mixing and applying a final coat of ArtResin, pigment powder to three 4” x 6” artist panels and four box insert molds. The artist panels were originally covered with acrylic paint pour and I had one coat of clear ArtResin poured over top. There were some imperfections, so I sanded the surface with 80 grit sandpaper and here I add the second and final coat of resin. The inserts are made up a approx. 3 ” square basswood molds. I drilled a 3” hole a light over 3/8” deep for colour, some pits of cogwheels and resin. After the acrylic pa

 

TUTORIAL 6: Resin Pen Blanks on the Cheap
By: CL Woodturning
March 07, 2018 · 243 views

Nice way to cast resin pen blanks using Mica Pigment Powder. Mica Powder https://rover.ebay.com/rover/0/0/0?mpre https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F122666060424 Ice Cube Tray https://rover.ebay.com/rover/0/0/0?mpre https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F201989825060

 

The Vacuum Chamber - mould making
By: Jim Overton - Jimson's Stuff
February 27, 2018 · 3,571 views

This is the first of a series of videos showing uses of vacuum and pressure when using resin and silicone. In this video I am using the vacuum pump and chamber to de-gas silicone before pouring moulds. I got the vacuum pump and chamber from the Hvacstore www.hvacstore.co.uk https://hvacstore.co.uk/ Hvacstore are offering a 10% discount to anyone ordering from them if you use the code Jimson2018 at checkout. The silicone and the rest of my casting materials come from MBFG in belfast http://www.mbfg.co.uk/ the particular silicone I used in this video is http://www.mbfg.co.uk/rtv-silicone/gp-348

 

Resin skull box! /Woodturning challenge
By: Geiserwoodturner
February 26, 2018 · 222 views

I was challenged to do a resin project on my wood lathe! The design was left up to me so...... I came up with this resin skull container using beads I found at a fabric store. In this short tutorial I show you the process I went through to make this awesome project! I used polyester resin to cast the skull beads, and used mesquite wood for the base and lid. Follow along and enjoy this how to woodturning video! Many of my projects are for sale at: www.geiserwoodturner.com follow on Instagram @geiserwoodturner leave any more challenges in the comments below! music: rollin with the flow.... YT music library Standard YouTube license This video is for entertainment purposes only. geiserwoodturner is not responsible for actions that are unsafe. Be sure to read and understand how to safely operate your power equipment before you use it.

 

Tips for turning Colored Pencil Resin Cast Pen blanks (How I do it)
By: Chad Schimmel
February 25, 2018 · 1,484 views

In this video I give tips on how I turned my colored pencil pens. These small things may help save you some time and frustration that comes when turning colored pencil pen blanks. Here is all the info from my last video And the video is https://youtu.be/iKWe0rOI4W4 In this project I took colored pencils and cast them in resin to make a blank for a fountain pen. For the Fountain pen I used the all stainless steel Shakespeare kit. It is super high quality and uses a Bock nib. I cast the pencils in Liquid Diamonds epoxy resin. I used a couple other great tools like the block mol

 

Stabilizing w/ Cactus Juice/Resin Casting Peach Pits, Antler & Wood PART 2
By: Wake 'N Make
February 22, 2018 · 254 views

Part 2 One Step Closer to finally Making some art out of my Homegrown Peach Pits... I give a small tour of my land, cover some Pressure Casting for beginners, Stabilizing with Dyed Heat Cured Resin (Cactus Juice)& show you the Hybrid Resin Blanks that we Made! Next week we will on on the lathe and make a Peach Pit Pendant! Like//Comment//Share//Subscribe! Follow or find me here!//// https://www.facebook.com/wakeNmakeCreations/ https://www.instagram.com/wakenmakecreations/ https://www.etsy.com/shop/WakeNMakeCreations https://www.youtube.com/wakenmake THANK YOU JamiSun find his music at https://www.youtube.com/user/jamisonic https://jamisun.bandcamp.com/ https://www.facebook.com/JAMISUNmusic/ https://www.youtube.com/watch?v tMwaFcE2T-w

 

Andy Philip inspired Hybrid Wood and Epoxy Bowl
By: Asgard Woodturning
February 17, 2018 · 1,455 views

In this video I turn a hybrid wood and epoxy bowl inspired by the awesome Andy Philip I also explain the long absence since my last video check out Andys channel below https://www.youtube.com/watch?v 02L9RuVTL98&t 11s

 

What Does Stabilized Mean? Stabilizing Peach Pits & Wood with Cactus Juice by Wake N' Make
By: Wake 'N Make
February 16, 2018 · 327 views

Part 1 of 'What is Resin Stabilization!' Watch the video to find how I make thinks like Wood, Antler, Wild Mushrooms & even Peach Pits last forever! Please Like//Subscribe//Share Part 2 is coming next week:) Thank You DJ Ceiba! Check Him Out @ https://www.facebook.com/djceiba/ & https://soundcloud.com/djceiba I Purchased Resin @ www.turntex.com

 

Woodturning - The Globe Of Glory - Resin & Wood
By: Nick Zammeti NZ WoodTurning
February 02, 2018 · 37,187 views

MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.recordpower.co.uk/ WOODWAX 22 & SANDING SEALER http://www.ch

 

Woodturning -The Ash & Resin Vessel ( Slot Vase )
By: Andy Phillip
January 26, 2018 · 53,340 views

Turning a piece of ash into a vessel with red epoxy slots !! https://www.etsy.com/uk/shop/AndyPhillipHandmade

 

Hybrid Resin Art Piece / Woodturning
By: Carl Jacobson
January 19, 2018 · 18,928 views

I really enjoyed making this piece. The hybrid blank is Maple burl and Alumilite resin. The stand is Walnut, and the whole piece stands 7' tall. Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order TOOLS I USE IN MY SHOP: https://kit.com/CarlJacobson/woodturning https://kit.com/CarlJacobson/woodworking https://kit.com/CarlJacobson/camera-gear THANK YOU FOR SUPPORTING MY SPONSORS! Robust Woodturning Tools- http://www.turnrobust.com/ Easy Wood Tools

 

Woodturning- THE SHAGADELIC SAUCER!
By: Nick Zammeti NZ WoodTurning
January 19, 2018 · 55,152 views

I made a DIY shagadelic Saucer. Woodturned a pot for the base using wood and resin for the top. MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND

 

Woodturning - The Punky Worm Bowl
By: Andy Phillip
January 19, 2018 · 32,032 views

Turning a Punky spalted beech blank into a bowl and trying to get rid of the worm holes !! https://www.etsy.com/uk/shop/AndyPhillipHandmade

 

The Final Honey Do
By: EasyWoodTools
January 16, 2018 · 481 views

 

Glow In The Dark Alumilite & Amboyna Burl Blank
By: Casey Martin
January 15, 2018 · 2,024 views

Andrew's video: https://www.youtube.com/watch?v OktPDAihbrk My pen blanks: https://www.etsy.com/shop/WineCountryWoodwork OR https://winecountrywoodworks.com/ My pens: https://www.winecountrypens.com My email for questions or business inquiries: casey@winecountrypens.com

 

WOODTURNING - THE HAND OF MANY PENNIES !
By: Nick Zammeti NZ WoodTurning
January 12, 2018 · 33,820 views

Woodturning the Hand Of Many Pennies. I used an old piece of wood here for the base or bowl. Filled it with Pennies and set them all in Resin. I also carved out the hand from the same bit of wood. MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktin

 

WOODTURNING - A LIGHTSABER!
By: Nick Zammeti NZ WoodTurning
January 05, 2018 · 28,897 views

I made a Lightsaber, from Star Wars. I used woodturning and resin to make it. Also some electronics. MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER &

 

DIY Making Micarta for the first time, Resin Casting
By: Chad Schimmel
December 31, 2017 · 4,637 views

Here I make some DIY Micarta, I used burlap and cotton cloth with Liquid Diamonds resin and Alumilite dyes. Liquid Diamonds can be found here, http://goo.gl/3NCt2m Alumilite dyes can be found here, http://goo.gl/sDU9uL HDPE molds, https://goo.gl/sP5Gnk Please check out www.turnerswarehouse.com for pen making and casting supplies. What is Micarta? Micarta is a brand name for composites of linen, canvas, paper, fiberglass, carbon fiber or other fabric in a thermosetting plastic. It was originally used in electrical and decorative applications. Micarta was developed by George Westing

 

Black Vase with Resin Inlay. Part 1 - Making the Blank
By: John Clothier
December 30, 2017 · 1,058 views

In this project I created a vase from black oak with a green resin inlay. In this first of two parts I show you how I made the blank. MY WEBSITE https://www.johnclothier.co.uk FOLLOW ME ON FACEBOOK https://www.facebook.com/JohnClothierUK/ FOLLOW ME ON INSTAGRAM https://www.instagram.com/JohnClothierUK/ FOLLOW ME ON PINTEREST http://pinterest.com/JohnClothierUK

 

Polymer cane pen.
By: SCCFORUM
December 28, 2017 · 163 views

They don't always go to plan. :-) It would be easy to make good with a wood band or cast in resin and turn back down. I will probably strip this and re-turn. You will see that I have adapted the Rollester pen cap so it now has a clip. The Polymer cane is from Polyoriginals https://www.etsy.com/uk/shop/PolyOriginals Cheers Paul

 

Using Acetone To Clean Resin Off Tubes
By: RJBWoodTurner
December 26, 2017 · 1,782 views

Experimenting with a way to clean off tubes for reuse. Regards, Bob Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

THE CHRISTMAS TINSEL VASE!
By: Nick Zammeti NZ WoodTurning
December 22, 2017 · 18,006 views

I made a Christmas tinsel vase using Christmas tinsel and mixed in with resin . MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECO

 

Woodturning - The Blue Planet ...
By: Andy Phillip
December 22, 2017 · 564,900 views

Turning a hybrid sphere from a red mallee burl and blue epoxy resin ... I was contacted by someone who had seen a picture of the sphere that the 'hybrid casting master 'Heath Knuckles had made recently, and asked if I could make one ..I said i'd give it a try ...Thanks for watching Heaths channel https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ https://www.etsy.com/uk/shop/AndyPhillipHandmade music ... The Rhythm of Memories - Earth Hey Girl - Topher Mohr and Alex Elena Pontiac Shuffle - ALBIS

 

A Cast-Resin Christmas Tree
By: RickTurns
December 14, 2017 · 4,234 views

What could be more Christmas-y than a Christmas tree turned from casting resin? Well, yes, there are a few things, but maybe not in the woodturning world. Although perhaps if I were drinking egg-nog while I was turning the resin tree, that would do it.

 

Polyclay and resin
By: SCCFORUM
December 11, 2017 · 197 views

Alumilite resin & Polymer clay. My first time turning Polymer clay and it was great. Nasty catch but I was lucky and found all the pieces.

 

Making A Pinecone Fountain Pen with Alumilite Resin
By: Casey Martin
December 11, 2017 · 3,767 views

I made this pen from mini pinecones and Alumilite resin. If you'd like to purchase it, it can be bought here: https://www.etsy.com/WineCountryWoodwork/listing/578882319/pinecone-fountain-pen?utm_source Copy&utm_medium ListingManager&utm_campaign Share&utm_term so.lmsm&share_time 1512963766184 My pen blanks: https://www.etsy.com/shop/WineCountryWoodwork OR https://winecountrywoodworks.com/ My pens: https://www.winecountrypens.com My email for questions or business inquiries: casey@winecountrypens.com First song: Dreams by Joakim Karud https://soundcloud.com/joakimkarud Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0 http://creativecommons.org/licenses/b... Music promoted by Audio Library https://youtu.be/VF9_dCo6JT4 Second song: Sthlm Sunset by Ehrling: https://soundcloud.com/ehrling Music promoted by Audio Library https://youtu.be/5ptXIfhUrTA

 

My First Casting Experience And What Went Wrong
By: RJBWoodTurner
December 05, 2017 · 3,279 views

I made my first cast and it wasn't perfect. It was a real learning experience. Regards, Bob Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

PVC Casting Rack Upgrade
By: RJBWoodTurner
December 02, 2017 · 2,468 views

As soon as I finished my first PVC casting rack, the ideas for improvement began to flow. This is revision two and I believe a much more functional set up for casting in PVC. Regards, Bob Link to First Casting Rack video: https://youtu.be/r394URpIL0I Link to First PVC Casting Rack Video: https://youtu.be/wsvCKyr2Yrw Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Here's How I Made An Adjustable Rack For Casting In PVC Pipe
By: RJBWoodTurner
December 01, 2017 · 1,618 views

I need to cast some extra long Alumilite blanks for making kit less pens I can cast the blanks in PVC pipe, I just need a way to hold the pipe in the pressure pipe. Here's what I came up with. Rehards, Bob Link to First Casting Rack video: https://youtu.be/r394URpIL0I Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

How to Make a Mold Rack for Your Pressure Pot
By: RJBWoodTurner
November 28, 2017 · 2,862 views

This is an easy yo make racking system for transferring molds into a pressure pot. Regards, Bob Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Here's How I Built a Floor For My Pressure Pot
By: RJBWoodTurner
November 26, 2017 · 2,927 views

The bottom of my pressure pot is concave so I decided to to build a floor so that I could set things in the pot and not have to worry about the resin running to one side of the mold. Regards, Bob Video for setting up a pressure pot: https://youtu.be/YAEKziOJqQE Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Alumilites Amazing Clear, Alumilite Dye & Alcohol
By: dc9apu
November 22, 2017 · 781 views

This video is about Alumilites Amazing Clear, Alumilite Dye & Alcohol Correction: I used 91% isopropyl alcohol not denatured alcohol.

 

Pen castiing & molding Part 2 of 2
By: BowersCraft Woodturning
November 19, 2017 · 86 views

Pen Turning & polishing through to final assembly Polish 3M FAST CUT https://www.ebay.co.uk/itm/Fast-Cut-Compound-3M-Perfect-It-III-POLISHING-CAR-BODY-SHOP-1kg-09375/221628188602?epid 1609344691&hash item339a11c7ba:g:Mr8AAOSwg3FUg6PN Polish G10 https://www.ebay.co.uk/itm/Farecla-G10-Rubbing-Compound-500ml-Car-Bodyshop-Finishing-Liquid-Polish/382277114277?epid 1742149553&hash item59017dd9a5:g:FeEAAOSwC81ThxV5 Polish G3 https://www.ebay.co.uk/itm/Farecla-G3-Advanced-Liquid-Compound-1-Litre-Car-Polishing-Paint-Restorer/382259425767?epid 1505795489&hash item59006ff1e7:g:pawAAOxyUI1TIY-e Pen Kit http://pencrafts.co.uk/store/index.php?route product/product&product_id 906&search celtic

 

#136 Woodturning a Cast Resin Bowl Part 2 Fail!!
By: Stephen Ogle
November 16, 2017 · 6,089 views

Part 2 of my Resin Cast bowl ended in failure although the turning and polishing went very well. I give credit once again to Brendan Stemp for his great videos on casting and turning resins. I hope you enjoy this project.

 

Casting vs Stabilizing: What's the Difference? Sam Angelo
By: WYOMINGWOODTURNER
November 12, 2017 · 3,698 views

In this video Sam attempts to explain casting and stabilizing and what is exactly the difference from one to the other. Please let me know if you have any questions or....... Watch videos on Casting or Stabilizing by Zac Higgins at https://www.youtube.com/user/NVWoodwerks Or....https://www.youtube.com/user/TurnTex

 

Resin Casting - Green and Black Swirl
By: John Clothier
November 12, 2017 · 13,226 views

In this video I show you how I made a resin pen blank. I used epoxy Resin with a green pearl and solid black and the flip pour method

 

Resin & Spruce cone Door knob
By: SCCFORUM
November 12, 2017 · 190 views

It always fascinates me how the pinecone comes out in amazing patterns.

 

MAKING A LIGHTHOUSE FROM RESIN & WOOD!
By: Nick Zammeti NZ WoodTurning
November 10, 2017 · 43,378 views

MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en HEATH KNUCKLES CHANNEL https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ SMALL SCALE LIGHTS https://www.smallscalelights.co.uk/ MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorks

 

Pen castiing & molding Part 1 of 2
By: BowersCraft Woodturning
November 09, 2017 · 170 views

This is part 1 of 2 about my system for casting resin Pen blanks drilling them turning & polishing & finally assembly The links below refer to products used in the video The Resin Used http://www.mbfg.co.uk/crystics-9293-casting-resin/crystics-9293-casting-resin-5kg.html The Pen Kits https://www.amazon.co.uk/gp/product/B01M2C71VW/ref oh_aui_detailpage_o09_s00?ie UTF8&psc 1 Glitter https://www.ebay.co.uk/itm/100G-GLITTER-WINE-GLASS-CRAFT-HOLOGRAPHIC-IRIDESCENT-NAIL-ART-FLORISTRY-DUST/221401034213?ssPageName STRK%3AMEBIDX%3AIT&_trksid p2057872.m2749.l2649 Mica Pigment Powder https://www.ebay.co.uk/itm/Perfect-Mica-Pearl-Pigments-Powders-Metallic-Extra-Free-mini-misting-spray/122666060424?hash item1c8f778a88:m:mjmSjnzTXBM4BvdfzrAMUew

 

The Golden Orb
By: Brendan Stemp
November 08, 2017 · 5,041 views

I use a casting of Gumnuts, Epoxy Resin and Metallic Powder to create an intrigueing sphere.

 

Alumilite Epoxy : Amazing clear cast , Water clear
By: SG Art Turning
November 05, 2017 · 8,893 views

Coupon Code: SGARTTURNING15OFF valid Oct.26 - Nov. 26 2017 Product Link: https://www.alumilite.com/store/p/1073-Amazing-Clear-Cast-Bar-Top-Coating.aspx Facebook : https://www.facebook.com/SGTurning/shop Email : simgadoury@gmail.com You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg Patreon : https://www.patreon.com/sgartturning My Lathe Laguna : https://lagunatools.com/classic-machinery/lathes/revo-2436-lathe-220-volt

 

MY RESIN PRESSURE TANK/ ANOTHER GIVEAWAY! WW#32
By: Nick Zammeti NZ WoodTurning
October 25, 2017 · 8,974 views

this is my resin pressure tank, i use this for resin casting. in my woodturning shop. MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw D.C WOODWORKING https://www.youtube.com/watch?v 353N6CLDNB4 BRYAN PHILIPS http://instagram.com/bybrynphipps MY PRESSURE TANK/ THE SPRAYCENTRE https://www.sprayequipment.

 

Turning a Cast Resin Tool Handle part 2: woodturning with Sam Angelo second upload YT
By: WYOMINGWOODTURNER
October 21, 2017 · 3,621 views

Turning a Cast Resin Tool Handle PART 2 Sam began casting a resin tool handle for a box scraper in part 1: (see link below). He completes the project by turning the cast resin tool handle and attaching the tool steel. Cast Resin Tool Handle .....the casting (PART 1) https://tinyurl.com/y9f2gnqk For more on casting-check out this playlist on casting: https://tinyurl.com/yd3xg5td See my work at www.samangelo.com and www.wyomingwoodturner.com

 

Pinecone & Resin
By: SCCFORUM
October 21, 2017 · 1,700 views

Bottle stopper. Resin with three Pinecones. Ocean Blue Alumilite. It was interesting how the Blue changes to a Maroon colour.

 

The First Step in Casting is Setting Up Your Pressure Pot
By: RJBWoodTurner
October 20, 2017 · 10,501 views

I'm starting down the path of casting some of my own pen blanks and as promised, I'm taking you along every step of the process. In this video I purchase, set up, and pressure test a Harbor Freight paint pot. Regards, Bob Link to Pressure Pot Parts and Prices: https://drive.google.com/file/d/0B0q5kNsHASevRHkwSE9JbGxYcDA/view?usp sharing I wanted to do a quick update to talk about everything going on in the shop. Regards, Bob Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Wood and Resin - Hybrid dragon scale !! Blank / Paperweight
By: Andy Phillip
October 20, 2017 · 78,738 views

I made this Blank with epoxy resin and Coolibah Burl , I intended to cut it up and make something with it but thought it was to nice to cut up so it is now a paperweight / ornament ... thanks for watching ...

 

Alumalite vs Casting Craft Resin
By: Gabe Castro
October 20, 2017 · 352 views

Alumalite vs Casting Craft Resin in Steampunk turning tool handles. Click link to buy Alumalite: http://amzn.to/2xUB0it Clink link to buy Casting Craft Resin: http://amzn.to/2yDNwXw

 

Cast Resin Tool Handle .....the casting (PART 1) woodturning with Sam Angelo
By: WYOMINGWOODTURNER
October 17, 2017 · 4,025 views

Part 1.......Sam covers the casting for making a tool handle. Sam begins by covering the steps and the supplies needed in the casting process. He casts the resin tool handle---part 1---and finishes the project by turning the handle in part 2. LINK to part 2 Turning the Handle https://tinyurl.com/y86d8nps Sam uses Alumilite Clear, Slow --casting resin.

 

#135 Casting and Turning a Resin Bowl
By: Stephen Ogle
October 16, 2017 · 10,088 views

After watching Brendan Stemp cast a bowl with resin and turn it into a beautiful masterpiece I decided to try one for myself. Here is Part 1 which includes the methods I came up with to cast a rough bowl with resin using Silmar 41 Polyethelyne. The links below will take you to Brendan Stemp's Channel and to Composite Envision's website if you are interested in the Silmar 41 Casting Resin. Brendan Stemp's Channel: https://www.youtube.com/user/BrendanStemp Silmar 41: https://compositeenvisions.com/silmar-41-clear-polyester-casting-resin-531.html?zenid e84cb78d3126c4f3f01120beefc124ab

 

Resin Casting - Blue Peacock Flip Pour
By: John Clothier
October 15, 2017 · 16,551 views

In this video I show you how I cast a block of resin ready for pen blanks. I used epoxy Resin, 6 different colours and the flip pour method i show you how you can cast your own blue peaock inspired resin blank Don't forget to visit my other social media: Website - https://www.johnclothier.co.uk Instagram - https://www.instagram.com/JohnClothierUK/ Facebook - https://www.facebook.com/JohnClothierUK

 

How hot Alumalite gets while curing
By: Gabe Castro
October 15, 2017 · 44 views

How hot Alumalite gets while curing. Black dye added for casting blanks. Click link to buy Alumalite: http://amzn.to/2zBvAeH

 

More Burl & Alumilite Resin!
By: Casey Martin
October 14, 2017 · 6,218 views

This block has sold. Buy my pen blanks here: https://www.etsy.com/shop/WineCountryWoodwork?ref l2-shopheader-name OR https://winecountrywoodworks.com

 

C.A. Technologies Pressure Pot for Casting with Sam Angelo
By: WYOMINGWOODTURNER
October 13, 2017 · 4,793 views

In this video Sam offers a general overview of the C.A. Technologies Pressure pot. He covers the basic use of the unit and each part that comes with the pressure pot: these include the pressure gauge, safety release valve, air inlet fitting and outlet port and ball valve. Other fittings are required determined by your own set up. This is not a review. For more of my casting videos/playlist: https://goo.gl/rVr1bz C.A. Technologies pressure pot video by Zac Higgins https://www.youtube.com/watch?v 6iQEPaa82Z0

 

Trying out Glimmerstonez in Epoxy, Polyester, and Alumilite resins, Turns like corian!
By: Chad Schimmel
September 26, 2017 · 3,202 views

John Elmy of Glimmerz sent me this mix called Glimmerstonez, I decided to try it in 3 different resins. Overall it worked well and has a great look to it. I'll be using it more in the future. For pen supplies check out www.turnerswarehoues.com Turners warehouse also carries, molds, Liquid diamonds resin, alumilite resins and many other great casting supplies For plastics polish you can find it here. http://amzn.to/2wUcb5V

 

Cast Resin Bowl with Alumilite-Clear-Slow...Sam Angelo
By: WYOMINGWOODTURNER
September 22, 2017 · 9,090 views

Sam casts a bowl using Alumilite.....a very popular 2 part casting resin. As a different approach he uses a second plastic bowl to reduce the volume of the resin. To see more of my finished art, visit www.samangelo.com OR www.wyomingwoodturner.com and find me on ETSY and Facebook

 

Pressure Pots for Alumilite Resin Casting (Questions Answered)
By: Casey Martin
September 16, 2017 · 9,931 views

My eBook: https://www.winecountrypens.com/products/a-course-in-woodturning-ebook TCP: TCP Global Commercial 2.5 Gallon (10 Liters) Spray Paint Pressure Pot Tank with Manual Mixing Agitator https://www.amazon.com/dp/B00KFT5A3S/ref cm_sw_r_cp_api_DNwVzbGE05DNV Bolt to fix the hole left by the agitator: 5/8 bolt, 2 flat washers, 1 lock washer, a nut. Links to Pressure Pot Videos: Zac Higgins - Setting Up A Harbor Freight Pressure Pot https://youtu.be/vO1sD3rvZdA Deema - Pressure Pot vs Vacuum https://www.youtube.com/watch?v 7IX9RvH5rxI My Pen Blanks: https://winecountrywoodworks.com OR https://www.etsy.com/shop/WineCountryWoodwork?ref seller-platform-mcnav

 

Resin and Maple Burl / Woodturning Projects
By: Carl Jacobson
September 15, 2017 · 83,620 views

My buddy Heath Knuckles cast this awesome resin and Maple burl blank. He tinted the risen with a ocean blue dye. The wood is Maple burl, checkout the awesome video of Heath casting this piece. Heath's Channel https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ/featured Casting video https://www.youtube.com/watch?v KNyRHfY1HGc&feature youtu.be Makers Central- Birmingham May 5th & 6th 2018 - Hope to see you there! http://www.makerscentral.co.uk/ Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15%

 

Smoky Quartz Mist
By: Bear Tooth Woods
September 13, 2017 · 13 views

Insert better description here.

 

Heres How I Turned A Pen From An Inlace Acrylester Blank
By: RJBWoodTurner
September 05, 2017 · 2,055 views

This was a tedious but rewarding turn. Inlace Acrylester blanks are beautiful you just need to take your time when turning them. Regards, Bob My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Resin pen blank
By: SCCFORUM
September 03, 2017 · 162 views

Opticast 100 resin. Colours, Alumilite Yellow & Pearl X Blue. The pen kit is a Zeta from Taylor Mirfield.

 

MIXING WOOD SHAVINGS INTO RESIN!
By: Nick Zammeti NZ WoodTurning
September 01, 2017 · 288,904 views

MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MUSIC CREDIT http://www.epidemicsound.com/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw MY NZ WOODTURNING EMBLEMS (round brass logo makers mark) http://www.williams-eng.co.uk/ THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-

 

Making a Cast Resin Bottle stopper Mold from PVC--- Sam Angelo
By: WYOMINGWOODTURNER
August 22, 2017 · 3,351 views

Sam uses PVC pipe as a mold for casting bottle stoppers: This is a 'quick tip' on how he makes the molds----NO Casting in this video.

 

Pressure Pot Caddy
By: John Clothier
August 20, 2017 · 277 views

I recently purchase a pressure pot to start my own resin casting. In this video I show you how I made the caddy to hold the molds. This was very much a thrown together from scraps in the workshop affair. While it is functional it probably wont last very long and doesnt look pretty.

 

Cast Resin Bowl with a Center Core: 'The TURNING' Part 2 Sam Angelo wyomingwoodturner
By: WYOMINGWOODTURNER
August 18, 2017 · 5,639 views

Part 2----In this video Sam covers the process of turning the cast resin bowl he started in Part 1. On the inside the walnut plug is textured and colored. This turned into a nice feature. Link to Part 1 https://www.youtube.com/watch?v 6II1RD_Qfo8 Playlist of cast resin projects... https://www.youtube.com/playlist?list PLL5-IWEcq6B_KsiHgC_KSibft04EfzMMw I now offer Ron Brown's Amazing Doughnut Chuck: If you are interested, check it out here. http://samangelo.com/index.php?route product/category&path 63 OR… watch my video- review of the Doughnut chuck https://www.youtube.com/watch?v sCMrGL-5jPI&t 183s See my work at: wyomingwoodturner.com and......................samangelo.com

 

Cast Resin Bowl with Center Core: 'the casting' Part 1 Sam Angelo wyomingwoodturner
By: WYOMINGWOODTURNER
August 13, 2017 · 7,362 views

Part 1----In this video Sam covers the process of casting a resin bowl. The walnut center core he adds later is turned into the spigot. On the inside the plug is textured and colored. This turned into a nice feature. He will turn and complete this bowl in Part 2. Link to Part 2 https://www.youtube.com/watch?v JCW1GCq5Frc Playlist of cast resin projects... https://www.youtube.com/playlist?list PLL5-IWEcq6B_KsiHgC_KSibft04EfzMMw I now offer Ron Brown's Amazing Doughnut Chuck: If you are interested, check it out here. http://samangelo.com/index.php?route product/category&path 63 OR… watch my video- review of the Doughnut chuck https://www.youtube.com/watch?v sCMrGL-5jPI&t 183s See my work at: wyomingwoodturner.com and......................samangelo.com

 

Resin Inlay / Mother Of Pearl / Lichtenberg Figure / Woodturning
By: Carl Jacobson
August 11, 2017 · 20,867 views

I turned this piece of California pepper wood green. I used a Lichtenberg burner to embellish the bowl, I inlaid mother of pearl in the fractures. Easy Inlay: https://www.imaginlay.com/ Conestoga Works: http://www.conestogaworks.com/ Braxton Wirthlin : https://www.youtube.com/channel/UC9I3Vn0EtNbds4HXuOwaHcg Wood Turners Anonymous Podcast: http://wtapodcast.com/ Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order TOOLS I USE IN MY SHOP: https://kit.com/CarlJacobson/woodtur

 

Rainbow
By: OzWorkshop
August 09, 2017 · 301 views

Here is my new project.. Resin rainbow ring.

 

Casting Worthless Wood With RJB Woodturner
By: Lynn Lacey
August 06, 2017 · 3,220 views

Bob from RJB Woodturner visited my shop in Texas and in this video we cast a piece of 'worthless wood' (Mesquite Burl) in an epoxy resin for pen blanks to be turned in future videos. Instagram; @LL_woodworks www.LL-Woodworks.net Facebook; https://www.facebook.com/LL-Woodworks-397970183658553/ Pen Making Playlist https://www.youtube.com/watch?v TO3P_otYxJE&list PLqhhB9PS87ya7CF3iNVel-Wjj6G7OQ0fh RJBWoodturner’s Channel - https://www.youtube.com/channel/UCmmCqkA0iEdwVsaS7kVwGLw Chad Schimmel’s Channel - https://www.youtube.com/watch?v n3-NJvVobgw&t 25s Liquid Diamonds - https://www.turnersw

 

Turning a Cast Resin Bowl -- Sam Angelo wyomingwoodturner
By: WYOMINGWOODTURNER
August 02, 2017 · 16,586 views

Sam completes a cast resin and wood bowl blank sent to him by Zac Higgins. More casting links below: Links Casting Resin (Playlist): Sam Angelo https://www.youtube.com/playlist?list PLL5-IWEcq6B_KsiHgC_KSibft04EfzMMw Resin and Timber Offcuts Bowl: Brendan Stemp https://www.youtube.com/watch?v 9-81Cwk9lPg Aluminum and Resin Bowl! Carl Jacobson https://www.youtube.com/watch?v r Alumilite Resin Cast Pinecone Bowl: Zac Higgins https://www.youtube.com/watch?v qLJM2P5JdoY I now offer Ron Brown's Amazing Doughnut Chuck If you are interested, check it out here. http://samangelo.com/index.php?route product/category&path 63 or watch my review on the Doughnut chuck https://www.youtube.com/watch?v sCMrGL-5jPI&t 183s

 

Epoxy Resin Casting, Hybrid Worthless Wood, Cholla and Watch Parts Tests
By: Chad Schimmel
July 04, 2017 · 4,265 views

In this video I will cast and turn 3 types of blanks Hybrid wood and resin, Cholla Cactus and Watch parts, I used Liquid Diamonds Epoxy resin which can be found here http://goo.gl/3NCt2m Black Cigar kit used, http://goo.gl/pVjCeF Monarch Grande kit used for watch parts pen, http://goo.gl/8xRCYU I square the blanks on the disc sander using this jig, http://goo.gl/384zPp The Scale I use to measure resin is, http://amzn.to/2eLFBzJ Tools I use for Pen making and wood turning, If you are thinking of purchasing use the link below to help us out! Jet 1221 lathe, http://amzn.to/2sUR5mF J

 

Home made pressure pot / tank for casting
By: Gabe Castro
June 27, 2017 · 2,141 views

My home made pressure pot / tank for casting large mound, please Subscribe.

 

Casting with Epoxy Resin, First use and comparison
By: Chad Schimmel
June 21, 2017 · 13,071 views

This was my first use with epoxy resin. ***NOTE AS OF 7-2-17*** I liked this resin so much we will now offer it at TurnersWarehouse, You can find it here http://goo.gl/3NCt2m Thanks for your support! Resin was provided by the Manufacture for this review, I told them I would give in an honest review, If I like it I say so If I hate it I say so. Over all I like the product, it was similar to alumilte and did not have a bad smell when using. The castings had very little to no shrinkage. I will be using more in the future. For pen making and turning supplies please check ou

 

ResinPlatter - Deep Dive
By: OzWorkshop
June 16, 2017 · 432 views

A new platter . 'Deep Dive'. The resin gives depth to the sea like paint

 

Dan Dragon - Resin Duck Calls
By: Ocean Woodturners
June 13, 2017 · 303 views

Member Dan Dragon demonstrates turning a duck call out of resin and stabilized wood at the Ocean Woodturners May 2017 meeting in Rumford, RI. For more information visit http://www.oceanwoodturners.com

 

5 Best Tips For Using Alumilite Casting Resin
By: Casey Martin
May 28, 2017 · 17,655 views

In this video I talk to you all about the 5 Best Tips I've learned when using Alumilite. These aren't tips that you can normally find, so I skipped a lot of common tips. Let me know what you guys think! Zac Higgin's channel: https://www.youtube.com/user/NVWoodwerks Pearl Ex Pigments:https://www.jacquardproducts.com/pearl-ex-pigments.html I recommend just searing on Amazon for Pearl Ex if you want to buy it directly, or locally. My pen blanks: winecountrywoodworks.com OR https://www.etsy.com/shop/WineCountryWoodwork?ref seller-platform-mcnav My pens: winecountrypens.com My Email: casey@winecountrypens.com

 

Make a Silicone Mold, Resin Cast a project, Pen rest
By: Chad Schimmel
May 13, 2017 · 5,937 views

In this video I make a wood form, make a silicone mold from that and then cast rest to make a pen rest. I use silicone mold material, Polyester resin and alumilite resin in this video. IF you like the video give it a thumbs up and don't forget to subscribe to the channel. For pen making and turning supplies check out www.turnerswarehouse.com its the go to place for supplies! Here are the tools and equipment I use, I have included these amazon links because I get a commsion if these items are purchased. I only ask if you are going to buy them anyway please use these links and that

 

Diggers Resin test with Model Paints
By: TGL Woodturning
May 04, 2017 · 231 views

I test some cheap Diggers fibreglass and casting resins, mixing them with model paints to see whether they cure and how they look. Thank you to my very first Patreon supporters! You too can be a part of my Patreon community. https://www.patreon.com/TGL or follow me on Facebook https://www.facebook.com/TGLWoodturning/ Products Used: Diggers Fibreglass Resin Diggers Casting and Embedding Resin Humbrol and Revell Model Paints Music: 'Thief in the Night' Kevin MacLeod (incompetech.com) 'Easy Jam' Kevin MacLeod (incompetech.com) 'Semi-Funk' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

Aluminum and Polyester Resin Bowl Woodturning Project
By: Carl Jacobson
April 28, 2017 · 1,837,511 views

Peter cast this resin, and aluminum bowl blank. Check out the link below to see how he did it. Polyester resin doesn't turn very well, but if you're going to try it carbide tools work best. Bowl casting video: https://www.youtube.com/watch?v ssaYktaIrTY&feature youtu.be Peter's Channel: https://www.youtube.com/user/kludge1977 The music is from YT 'Don't Look' and 'Red Chair' I put together a list of some of the tools I use in my shop (affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link: https://www.amazon.com/shop/thewoodshoptv

 

Part 2 Casting red white and yellow duck call barrel. The Turning!
By: Michael Gallinger
April 26, 2017 · 498 views

Part 2, turning a resin casting on a lathe, into a duck call.

 

Part 1 Casting red white and yellow duck call barrel
By: Michael Gallinger
April 26, 2017 · 738 views

Making a resin casting for a duck call. Fluorescent colors. Alumilite Clear.

 

Casting Burl 'Worthless Wood' Blanks with Alumilite (Giveaway)
By: Casey Martin
April 19, 2017 · 47,117 views

This giveaway has ended. Thanks to everyone who participated! Read for the Giveaway!!! Hey everyone I'm super excited to be giving these blanks away. In order to qualify to be chosen make sure you do these 3 things. 1. Comment down below that you're interested and how you think the blanks should be cut up. 2. Like the video and make sure you're subscribed to the channel. 3. Try to offer a suggestion for a future video I could make! Thanks for watching everyone!

 

Wood & Resin Disc
By: SCCFORUM
April 17, 2017 · 327 views

Hi All, This was a nice project to do. I ended up sticking it on the door but I could of drilled a hole in it and turned it into a pendant. Or drill a couple of holes in the middle and turn it into a very large button. :-)) I got the Idea from watching a video from Pam at Highland Boxes. https://www.youtube.com/channel/UCkg4kARmfFOfrlWDGUHzHqQ Cheers Paul

 

Badge Doming Resin, Fridge Magnets and Yandles
By: Jim Overton - Jimson's Stuff
April 05, 2017 · 2,537 views

In this video I show the process I used to make some custom fridge magnets using polyurethane doming resin. Please follow all the instructions you get with any resin you choose to use. It is a very technique sensitive process and I had quite a few failures in some early batches. I will be at the Yandles Woodworking show with Nick Zammit on Saturday the 8th April 2017. The show runs from the 7th to the 8th April and is held at Yandles, Martock, Somerset, UK I buy the majority of my casting and mould making materials from MBFG in Belfast http://www.mbfg.co.uk Yandles http://www.yandles.co.uk

 

Pressure and Vacuum Chambers for Resin n' Wood
By: Brendan Stemp
March 24, 2017 · 8,724 views

My set up.

 

To SCRAPE OR CUT RESIN? woodturning with Sam Angelo
By: WYOMINGWOODTURNER
March 13, 2017 · 10,832 views

Finishing a cast resin project presents challenges. Sam explores the decision to cut or scrape a cast resin turning. Alumilite sanding kit http://www.alumilite.com/alumilite-polishing-kit.aspx stewmac.com http://www.stewmac.com/Materials_and_Supplies/Sanding_and_Polishing/Buffing_and_Polishing/ColorTone_Polishing_Compounds.html

 

#79 Floating Ball in Resin, Conclusion?
By: Yuval Lahav Woodturning
February 19, 2017 · 15,639 views

After casting my first ball in resin, and learning a lot from the 'failed' experiment, I went ahead and turned it to completion, and I think the result speaks for itself. Patreon: https://www.patreon.com/YuvalLahav Twitter: https://twitter.com/YL_Woodturning Instagram: https://www.instagram.com/yuval_lahav_woodturning/ Facebook: https://www.facebook.com/yuval.lahav.16 Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: The Mind Orchestra - Blossom Trees The Mind Orchestra - The Minoan All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: TOMTURNS.COM, Michael L. Kent, Tina Minahan,

 

The Gumnut Tool Handle
By: Brendan Stemp
February 17, 2017 · 10,614 views

The process I used to make this handle made from gumnuts cast in resin.

 

#125 Stabilizing and Casting Bad Turning Blanks
By: Stephen Ogle
February 02, 2017 · 13,736 views

Getting ready for some Arts and Crafts shows coming up soon. I am getting ready to make pens from stabilized and epoxy cast blanks. This is my method for prepping the blanks for turning.

 

Estabilización de Madera Parte 1
By: Adam Woodturner
January 15, 2017 · 6,134 views

Nueva cámara de estabilización, prueba

 

Brennholzschale in schwarz gedrechselt Firewoodbowl
By: Woodturning F-Z
January 15, 2017 · 307,263 views

Brennholzschale mit schwarzem Epoxidharz Holz wurde Zwetschke, Esche und kleine Äste Sanddorn verwendet Besten Dank an Thomas Hilleke für die tolle Idee hillekehttps://www.youtube.com/channel/UC1haFZobhDdQUHYkT11u0Dg Epoxidharz:https://www.amazon.de/gp/product/B01928FT1K/ref oh_aui_detailpage_o03_s00?ie UTF8&psc 1 Farbe:https://www.amazon.de/gp/product/B00BIZDTEA/ref oh_aui_detailpage_o01_s00?ie UTF8&psc 1

 

Casting Sweet Gum Pod and Alumilite Pen Blanks
By: Casey Martin
January 07, 2017 · 9,842 views

This is the second part of my three video series where I cast the Sweet Gum Pods I just stabilized, in Alumilite. My website: www.winecountrypens.com My pen blanks: https://winecountrywoodworks.com https://www.etsy.com/shop/WineCountryWoodwork?ref hdr_shop_menu https://www.classicnib.com/pen-blanks/wine-country-hybrids-by-casey-martin My email: casey@winecountrypens.com

 

Presto Cooker Vacuum chamber
By: dc9apu
September 20, 2016 · 18,333 views

This video is about Presto Cooker Vacuum chamber

 

Cactus Juice and Acrylic
By: dc9apu
September 16, 2016 · 910 views

This video is about Cactus Juice and Acrylic

 

Toczenie żywicy epoksydowej
By: DrewnianySzejk
August 22, 2016 · 610 views

 

Adicted to Cactus Juice and Alumilite
By: dc9apu
June 07, 2016 · 42,349 views

This video is about Adicted to Cactus Juice and Alumilite For Cholla cactus and other woods contact Sam Beam at chollawood@icloud.com Sams E-Bay page http://www.ebay.com/itm/Large-RAW-Juniper-Live-Edge-Burled-Duck-Call-Blanks-Woodworking-Rare-Woods-/222412196276?hash item33c8ccc9b4:g:Kw4AAOSw4CFYphCJ

 

You Stabilized What?????
By: dc9apu
April 10, 2016 · 10,510 views

This video is about Stabilized corn on the cob My Etsy Store https://www.etsy.com/shop/RecycleNature?ref hdr_shop_menu

 

Stabilizing you have control
By: dc9apu
April 01, 2016 · 4,075 views

This video is about Stabilizing you have control My Etsy Store https://www.etsy.com/shop/RecycleNature?ref hdr_shop_menu

 

Alumilite & House Of Kolor Dry Pearls
By: dc9apu
March 30, 2016 · 1,347 views

This video is about Alumilite & House Of Kolor Dry Pearls My Etsy Store https://www.etsy.com/shop/RecycleNature?ref hdr_shop_menu

 

Cactus Juice at 3000 Psi
By: dc9apu
March 18, 2016 · 4,132 views

Cactus Juice at 3000 Psi Please do not try this High pressure is dangerous. My Etsy Store https://www.etsy.com/shop/RecycleNature?ref hdr_shop_menu

 

Casting resin fix Quick tip
By: Rich McNatt
March 09, 2016 · 722 views

how to get out a casting that sucks.

 

Alumilite What Nobody Tells You
By: dc9apu
January 31, 2016 · 71,170 views

This video is about Alumilite What Nobody Tells You about working with Alumilite and casting pens. My Etsy Store https://www.etsy.com/shop/RecycleNature?ref hdr_shop_menu

 

Alumilite And Hickory Farms Packing
By: dc9apu
January 31, 2016 · 455 views

This video is about Alumilite And Hickory Farms Packing material

 

Alumilite and Wacky Mac
By: dc9apu
December 13, 2015 · 530 views

This video is about Alumilite and Wacky Mac

 

Alumilite Casting Tips for Casting Pink Pen Blanks
By: Turning Round
December 10, 2015 · 1,622 views

Alumilite Casting Tips for Casting Pink Pen Blanks. Seriously how do you cast Pink pen blanks, I know mix Red and White, but how does that work with Alumilite White resin. I did some testing and I think I figured it out.

 

Alumilite Cactus Juice And Cholla Cactus
By: dc9apu
December 10, 2015 · 5,009 views

This video is about Alumilite Cactus Juice And Cholla Cactus pen blanks and spinning tops For Cholla cactus and other woods contact Sam Beam at chollawood@icloud.com Sams E Bay page http://www.ebay.com/itm/Large-RAW-Juniper-Live-Edge-Burled-Duck-Call-Blanks-Woodworking-Rare-Woods-/222412196276?hash item33c8ccc9b4:g:Kw4AAOSw4CFYphCJ

 

Casting Cottonwood Burls into Pen Blanks
By: Turning Round
November 10, 2015 · 1,231 views

Casting Cottonwood Burls into Pen Blanks. I take the Burl through a 4 process, to dry, stabilize, cast, cut. I am making pen blanks that will be great for the holiday presents. The are bright red.

 

Alumilite And Turning Shavings
By: dc9apu
October 26, 2015 · 1,248 views

This video is about Alumalite And Turning Shavings

 

Alumilite and pen blank cutoffs
By: dc9apu
October 24, 2015 · 457 views

This video is about Alumilite and pen blank cutoffs

 

Alumilite And Pistachio Nut Pen Blanks
By: dc9apu
October 23, 2015 · 3,635 views

This video is about Alumilite And Pistachio Nut not an instructional video. it is just what I had to do to cast and turn Pistachio Nuts into pen blanks

 

Casting a bottle stopper, short version
By: Rich McNatt
October 10, 2015 · 703 views

 

Casting a bottle stopper Long version
By: Rich McNatt
October 10, 2015 · 2,160 views

 

Using Pallet wood to make pen blanks by casting them in Alumilite
By: Turning Round
October 06, 2015 · 14,294 views

Here is my version of the pallet challenge, I know it is months late and I didn't show dismantling the pallet, that is in last years video, But do I get a 'C' for trying? See for yourself, the next video I put out will be the turning of these pen blanks to see what I can uncover.

 

Alumilite & Honeycomb
By: dc9apu
October 01, 2015 · 17,464 views

This video is about Alumilite & Honeycomb for pen blanks. Not an instructional video just my experience working with Alumilite and honeycomb

 

PORTAVELAS DE EUCALIPTO Y RESINA EPOXI
By: Antonio sanchez tortosa
September 06, 2015 · 6,381 views

 

Alumilite Cactus Juice And Sweet Gum Balls into pen blanks
By: dc9apu
August 31, 2015 · 5,063 views

Turning Sweet Gum Balls into a pen blank

 

Worthless resin casted wood on lathe.
By: Ethan Cook
August 26, 2015 · 524 views

Once finished this will be a sewing seam ripper. I wet sanded with walnut oil up to 2000 grit including lateral sanding each grit and rotating the blank after each grit as well.

 

Polyester Resin Pen Blank Casting
By: The Walnut Log Studio
July 05, 2015 · 6,134 views

This video is a demonstration of the Craft Supplies USA Apprentice Polyester Resin Casting System. I talk about my experiences with it and go through the entire casting process. There will be a follow up video once the resin has cured enough to turn into a pen! LIKE my video and SUBSCRIBE to my channel! See more at my website: www.thewalnutlog.com Feel free to comment and ask questions!

 

Casting Walnut in Alumilite to make worthless wood pen blanks.
By: Turning Round
June 26, 2015 · 11,946 views

Casting Walnut and Bright Red Alumilite to make Pen Blanks. This is a process of using a resin to make a wood and resin pen blank.

 

Making, casting and turning a watch parts pen
By: Aaron Meredith
December 10, 2014 · 5,726 views

 

Pen Making Shop Test Polyester Resin PR vs Alumilite on a stamp pen.
By: Chad Schimmel
October 28, 2012 · 14,874 views

This is a very simple test on Alumilite vs PR(polyester resin) and the reaction to Mod Podge, CA and plain paper. Be sure and subscribe for a new video each week.

 

Resin Blank casting pressure pot overview
By: fool4peppers
August 13, 2012 · 22,313 views

Basic overview of a recent pressure pot I built make resin pen blanks

 

Return to Turning Videos

Powered by Google

Great Bargains on Sale until July 5, 2018


Starter Pen Turning Kit

On Sale starting at $59.99 each

Save $10.00


List price normally starts at $69.99

All the essentials you need for pen turning, including 3 blanks, 3 hardware kits and a Pen Mill Kit with four pilot shaft sizes.

Click here for more information or to purchase


Pen-Turning Ergonomic Carbide Turning Tools, 3-Piece Set

On Sale for only $109.99 each

Save $30.00


List price: $139.99

Compact, comfortable rubber handles provide excellent control and reduce fatigue—replaceable carbide tips need no sharpening.

Click here for more information or to purchase


Customized Electric Branding Iron Gift Set

On Sale for only $99.99 each

Save $20.00 each


List price: $119.99

Personalized branding iron gift set lets your favorite woodworker customize their own design and message.

Click here for more information or to purchase


Excelsior Mini Lathe

On Sale for only $199.99 each

Save $100.00


List price: $299.99

With solid cast-iron construction, a robust 1/2 hp motor and a precision-machined live center, this little workhorse rivals features found in much larger lathes.

Click here for more information or to purchase


Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Stainless Steel Bottle Stoppers
Woodturning with Tim
From Walnut to Antlers

(Click any Ad to go to our Sponsor's Website)