Woodturning Online Videos

Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Jigs Videos (45)

Sort by

Or click here to: Search All Videos

Woodturning - The Simon Hope Carving Jig
By: Mike Waldt
June 19, 2019 · 5,791 views

Wolf Ridge Woodworking : https://www.youtube.com/channel/UCUVMh5tubVADcaNujTMVdGA Carving Jig: https://hopewoodturning.co.uk/tools-handles/specialized-tools-and-callipers/149/carving-jig?c 12 Simon Hope: http://www.hopewoodturning.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Easy Wood Tools: http://www.easywoodtools.com/ Easy Wood Tools at Amazon UK: https://www.amazon.co.uk/Easy-Wood-Tools-Chuck-M33-3-5/dp/B07664VKFB/ref lp_8318174031_1_13?srs 8318174031&ie UTF8&qid 1529428204&sr 8-13


Center finder or 'bonking board'.
By: Ian Robbo Robertson
January 09, 2019 · 464 views

A quick and easy centre finder for production work.


Digital Angle Finder For Wood Lathe Gouges And More Tips
By: ThePapa1947
December 17, 2018 · 1,679 views

I normally upload a new video on Fridays but in a recent YouTube video I mention using a digital angle finder for setting the platform on my 8 inch grinder. I used it to set the angle for my negative rake scraper. I A fellow wood turner and friend mentioned a video might be nice. Thank you Kyler for the idea. Kyler@ Woodturner Ky If you find this useful I welcome all comments. I enjoy making these videos and by clicking like and subscribe it lets me know its worth it. Check out my other videos. I have videos of natural edge bowls as well as segmented bowls. I hope there is something in them you find helpful and enjoyable. Please Like and Subscribe. I learned the trick of marking the sanding platform slide from this YouTube channel Kyler Woodturer Ky https://www.youtube.com/channel/UCUjdiBI3gzS5ANdYBMK4KmA


Coming Next - The Jig Build
By: Blind Woodturner
April 14, 2018 · 147 views

Coming next Friday - The Jig Build to allow me to do power routing on woodturning projects. *** Join me, Chris Fisher, the Blind Wood Turner, in my workshop. I started out in life as a regular guy, working in auto body repair at BMW, until one day, completely out of the blue, a rare virus (Toxoplasmosis) reared its ugly head and caused me to lose my sight in a matter of weeks. Despite the challenges of coming to terms with losing my sight, I refused to give up and, after four years I decided to take up woodturning so that I could make myself a vampire stake – I’m a huge horror film fan! W


A Quick Review Of My Sanding Jig
By: RJBWoodTurner
December 25, 2017 · 6,148 views

I've been getting lots of questions about this jig so I decided to do a video and answer them. Regards, Bob Purchase This Jig: www.signaturepensupply.com Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114


Indexing Wheels for Segmented Turners
By: Ron Brown
September 23, 2017 · 3,136 views

Ron demonstrated indexing wheels segmented turners use to align segmented rings. More info at www.ronbrownsbest.com


Introducing the Accu Wedge Segmenting Jig for the Bandsaw
By: SIS Woodworking
May 31, 2017 · 2,049 views

A new device called the Accu-Wedge has been developed to enable the cutting of segmenting wedges on the band saw. The wedges for segmented bowls can now be cut on the band saw, resulting in less wasted wood and a much safer method than using a table saw. The Accu-Wedge uses the double fence method for cutting the wedges, but it incorporates an auto indexing system that does not require wedgies or angles. This jig will be called the Accu-Wedge and the prototype version will be demonstrated at the AAW meeting in Kansas City on June 23-25, 2017. The Accu-Wedge is constructed from a 5/16 inch


Introducing the Accu-Slot Celtic Ring Jig
By: SIS Woodworking
May 29, 2017 · 1,958 views

Introducing the new commercial version of the Celtic Ring Jig for the production of Celtic ring and knot patterns on the bandsaw for wood turning projects. This jig will be called the Accu-Slot and the prototype version will be demonstrated at the AAW meeting in Kansas City on June 23-25, 2017. The Accu-Slot is constructed from a 10' x 15' aluminum plate that has 4 roller bearing on its base that rides on the rail on the Accu-Slice system. The unit also incorporated a 2.5' high extruded aluminum fence with channel slots for the attachment of a wide variety of clamping systems. Finally the fence is adjustable from 30 degrees up to 90 degrees with 1 degree accuracy. The system is scheduled for delivery in the fall of 2017. See our web site for additional details: www.sisweb.com/wood


circle cutting jig
By: Harry’s Woodcraft
August 29, 2016 · 2,558 views

Harry’s Woodcraft at the Little Garden Shed Workshop New band saw circle cutting jig, and roughing out a bowl blank ready for seasoning Music: Humidity silent partner Thank you for watching Please like, share and subscribe You can also follow me on: facebook: https://www.facebook.com/harrybrian.watts Instagram https://instagram.com/harrys_woodcraft/ twitter: https://twitter.com/HarrysWoodcraft


Hold Fast Live Center and Pen Mandrel
By: TMIProducts1
August 12, 2016 · 1,953 views

Highest precision live center pen mandrel system available to create superior pens. Updated video!


Rubber Chucky - chucky glide review
By: Jim Meier
August 01, 2016 · 825 views

A short review of Rubber Chucky's product Chucky Glide. A graphite embedded rubber strip that adheres to your tool rest to eliminate the problems from dings and gouges in your tool rest so you don't have to continually file an old tool rest. This product should be available later in the fall of 2016!


ToolMake16: A Reamer to make Mallet Head Holes, Willem's Woodnotes
By: Willem Kossen
July 25, 2016 · 1,314 views

Tapered Flat Reamer to make a Mallet, ToolMake16 Challenge Entry Time for another challenge, ToolMake16 by Mitch Peacock. My entry this year is a tapered reamer with which i use in making a small Mallet. There are many ways to make a mallet. Two part mallets have a separate head and handle. The usual way to add a handle to a mallet (same with hammers and axes etc) is to have the handle and the hole in the mallet tapered. how to make a tapered hole efficiently? well, that is what i made the reamer for. This is a proof of concept small flat reamer to make small tapered holes for small mallets.


Bandsaw Circle cutting Jig for large bowls (Part 2)
By: Bryan McMinn
April 06, 2016 · 1,223 views

SUCCESS! The 3/8' wide blade made the circle cutting jig work much better than in the part one video. Also this video shows a process that takes you from tree log to a lathe mounted bowl blank!


How to Use a Bowl Cutting Jig
By: The Russian Woodworker
February 14, 2016 · 625 views

In this video I tested out my bowl cutting jig. And I also show how to use it and it works like a dream. How to make the jig: https://www.youtube.com/watch?v Tkj2AJgLmuI The music is Electus by Fallen (ft. Charlotte Haining) from NCS: http://nocopyrightsounds.co.uk/video/electus-fallen-ft-charlotte-haining-ncs-release


Faceplate Centering Jig
By: RJBWoodTurner
January 25, 2016 · 7,363 views

This is a simple little jig that makes is very easy to perfectly center a face plate on your turning stock. Regards, Bob


Perfect Segments Every Time/Wedgie Sled
By: Carl Jacobson
January 18, 2016 · 125,251 views

If segmentation is something you're interested in, do yourself a favor and make this sled it will save you a lot of headaches.The sled is Jerry Bennett's design, and only cost about 30 to build. The sled is designed to work on your table saw. Thank You For Support My Channel My Amazon store with things I used in this video and tools I use in my shop. https://www.amazon.com/shop/thewoodshoptv Jerry Bennett https://www.youtube.com/channel/UCd8Qkm6R7002yQSKu-o1Vog Jerry's website www.segeasy.com My Etsy shop https://www.etsy.com/shop/Thew


Quick and Easy Pen Blank Drilling Jig
By: Barry's Workshop
January 14, 2016 · 15,510 views

This is a quick project that I made to hold pen blanks while drilling them for woodturning. I wanted something that was quick and easy to use, but would consistently hold the blanks securely in place with one hand while I operate the drill press with the other hand. This Drilling Jig was made with a scrap piece of construction grade lumber and a cheap butt hinge. I turned the handles on the wood lathe with a skew chisel. music by audionautix.com Subscribe: http://www.youtube.com/subscription_center?add_user UCYrXvMdKbXYtONur3rnRHcg


Prokraft Bottle Stopper Turning System
By: Prokraft
November 16, 2015 · 2,599 views

Watch how easy it is to prepare, mount and turn bottle stoppers with the Prokraft bottle stopper system. No more special tools no more wasted kits - the fasted and easiest way to turn stoppers. Kits available here: https://www.prokraft.co.uk/BSKT..html


Woodturning Bandsaw Jig Keeps Fingers For Another Day
By: As Wood Turns
September 24, 2015 · 7,659 views

http://www.AsWoodTurns.com In last week's video, I showed a bandsaw jig that I used to safely saw a vase. At first, I thought that it was too simple to do a video on but then I reconsidered due to how dangerous a bandsaw can be. So for a bit of bandsaw safety, here it is. BTW, if you need a 1.25' x 8 tpi bolt and nut, search for A193B7. Mine came from FMW Fasteners. Good turning. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns


Review of the Iron Fire Indexing Jig for your lathe
By: H F Bowern Designs - Harold Bowern
September 24, 2015 · 1,532 views

Welcome back This week I am taking a look at a new indexing system I bought for my Delta 12' lathe. The index system built into my , is a 24 pinned stop system I had gotten an email from my local woodworking supply store about another type of indexing system that would add even more choices of stops. The jig is made by Iron Fire Innovations in the US. Their website is www.ironfirellc.com Check their website for all the jigs they make and other details. What you get when you buy the jig is a quality plastic disc, a metal pin to use as your new index pin and the instructions on how to use


Pen Blank Cutting Jig
By: RJBWoodTurner
September 03, 2015 · 13,292 views

I'm always looking for ways to speed up slow processes in my shop. I recently needed to make a large number of blanks and decided to eliminate the process of marking the tube lengths on the blanks. I modified an older jig with markings and a stop block to allow me to cut blank after blank to the perfect length without having to size them with a tube. Its a real time saver. Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 RJBWoodturner P.O. Box 114 Newburgh, IN 47620-0114


Pen Blank Drilling Jig
By: Braxton Wirthlin
August 05, 2015 · 8,517 views

Here's a quick jig I use for drilling out the center of pen blanks. It's built from a couple scrap pieces of wood, and can be built in no time at all. Thanks for watching, and as always if you have any questions, or comments, please leave them in the comments! Or you can e-mail at the addresses listed below. braxton@timbermfg.com Instagram - https://instagram.com/bwirthlin/ twitter - https://twitter.com/bwirthlin Timber Manufacturing http://www.timbermfg.com Instagram - https://instagram.com/timbermfg twitter - https://twitter.com/timbermfg - - - - - - Please watch: 'Olive Branch Bowl' https://www.youtube.com/watch?v iIp6QYBSU0c - - - - - -


Shop Made Ellsworth Grinding Jig
By: Peter Stewart
August 04, 2015 · 43,216 views

For a written tutorial, go here: http://www.instructables.com/id/Sharpening-Jig-for-Woodturning-Gouges/ At that website, by the title there is an orange flag that says 'vote.' Please click that and vote for me in the metal contest. Thank you! This time, I made a grinding jig for woodturning tools for less than 5 dollars. Now this was not my original idea. Credit is owed where credit is due. Cap'n Eddie Castelin has a really good video on how to make a 2 dollar Ellsworth sharpening jig. His is not exactly the same as mine but it is similar and i would like to thank him for the awesome video on the 2 dollar jig. Check it out here: https://www.youtube.com/watch?v 5i9RDnJHz9g ---------------------------------------------------------------------------------------------------------------- Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080


Woodturning - Useful Jigs and Things!
By: Mike Waldt
April 14, 2015 · 25,739 views

Some useful jigs and things I've been making. Inspired by many hours of YouTube viewing, below are some links to the main inspirers: Albert Furtado's Channel: https://www.youtube.com/channel/UCi5o1Xb3


Naked Turner Circle Cutting Jig
By: Erik Anderson
March 07, 2015 · 27,661 views

How to make a great circle cutting jig for your bandsaw


Faceplate Centering Jig
By: Gord Rock
February 17, 2015 · 11,867 views

How to make a Centering Jig to make sure your faceplate is always centered on your work.


Using a Fluting Jig 1/11/2015 IKI Meeting
By: IKI Woodturners
January 16, 2015 · 4,920 views

IKI Wood Turners Presents: Using a Fluting Jig on the Lathe Featuring Dan Davis


A Diamond Burnishing Jig for Shear Scrapers
By: RickTurns
November 17, 2014 · 1,723 views

Woodturning: Make a burnishing jig with a diamond honing stone for burnishing a fine edge on scrapers. When used in shear scraping mode, the scraper will give an ultra-fine cut. Music courtesy of Audionautix.com


Pen Tube Painting Jig
By: RJBWoodTurner
September 22, 2014 · 10,356 views

When you turn acrylic, if the acrylic blanks are somewhat opaque, the brass tube can show through your work spoiling the overall look of the pen. One way to improve the look of the pen it to paint the tube a similar color to the blank prior to gluing it into the blank. I needed a way to hold a pen tube while I applied acrylic paint to it. This is a down and dirty jig I made to help me accomplish that task. It allows me to paint the entire tube, leaving no finger prints, and allow it to dry without messing up the paint job. Special Shout Out To: Larry over at the Tiny Trailer Workshop. Visit Larry's site, Subscribe and tell him Bob sent you. https://www.youtube.com/user/TinyTrailerWorkshop


Lathe Stock Centering Jig
By: RJBWoodTurner
April 24, 2014 · 7,419 views

I needed a jig to help me properly center both round and square stock on my lathe. Occasionally when driving the spur center into stock, the stock will split. I also want to attempt inside out turning and the first step involves taping pieces together to shape the inside of the pieces then flipping them around and gluing them up for the final turning. there is no way that I could drive a spur center into pieces that are taped together and expect the tape to hold. This simple jig makes using a spur center for inside out turning possible. It also guarantees perfectly centered pieces every time.


Sphere Jig Demo
By: IKI Woodturners
March 11, 2014 · 14,982 views

March 9th, 2014 IKI Turners Club Meeting Roger Domina demonstrated a sphere turning jig. Roger uses a similar jig for his personal lathe and made this scaled down version for the club lathe.


Wood Turning - Indexing Hole Drilling Jig
By: Mike Waldt
December 14, 2013 · 19,135 views

A simple shop made jig for drilling indexed holes on the lathe.


Jig for making one piece spoons
By: Carl Jacobson
September 27, 2013 · 183,246 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg I made this jig for holding spoons/scoops so they can be made in one piece on the lathe. If you make one of these I'd really like to see it, you can always share your project on my website. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https:


Band Saw Circle Cutting Jig
By: Mike Waldt
June 28, 2013 · 98,096 views

I make a simple Band Saw Circle Cutting Jig. Thanks to BCWoodworks1 and AmericanWoodworker for the inspiration.


Thread Chasing Jig for making male and female threads
By: Carl Jacobson
June 13, 2013 · 173,842 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg Thread chasing adds nice detail to a turned piece. This jig does both inside and outside threads. It only takes a few minutes to set up on the lathe. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robust dealer if you have any questions I'd be more than happy to help. Ro


Woodturning Jig for making perfect sphere
By: Carl Jacobson
April 19, 2013 · 335,115 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg With this jig you can turn perfect sphere every time. This jig is very easy to setup, and easy to use. Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order TOOLS I USE IN MY SHOP: https://kit.com/CarlJacobson/woodturning https://kit.com/CarlJacobson/woodworking https://kit.com/CarlJacobson/camera-gear THANK YOU FOR SUPPORTING MY SPONSORS! Robust Woodtu


sled for cutting segments on bandsaw
By: Segmentedturning
December 17, 2012 · 8,330 views

Hello again, In this video I just go through how I make my sleds for cutting the segments on my bandsaw. The process is pretty simple and the finished article does a good job over and over. I hope I dont confuse you to much. www.segmentedturning.co.uk


Simple Jig for Cutting a Bowl Blank
By: Angus Pitt
November 20, 2012 · 28,759 views

In this video I show you how to use a simple jig to cut a bowl blanks ready to turn on the lathe on the bandsaw.


Wiedemann Ball Turning Jig woodturning woodturner
By: WiedemannHeinz
July 30, 2012 · 42,321 views

This video shows the small ball turning jig. With a spindle height of 152mm you can turn balls up to 210mm. With a spindle height of 125mm you can turn balls up to 160mm. The big ball turning jig fits lathes up to 300mm spindle height. With the big version you can turn balls up to 500mm. For more information go to: http://www.drechslertreff.net


Homemade Fingernail grind jig- measurements and details
By: Dan Walker
July 15, 2012 · 7,820 views

Here is a follow up to a video I made some time ago. The design of the jig has changed a bit. I feel it is more simplified for anyone to make. All of the information should be there for you to try your own. Thanks for the questions, guys! Good Luck!


Vermec Jig Sphere Turning
By: TurnunChips
January 07, 2012 · 5,275 views

Woodturning sphere on vermec Jig


Homemade Ellsworth Grind Jig
By: Dan Walker
July 18, 2011 · 31,460 views

Grinding a 5/8 Thompson V Gouge on a homemade jig I have used for about 6 years. Parts from Ace hardware. T-track from Rockler.


Woodturning Shop Made Jig for off-center turning
By: Carl Jacobson
March 02, 2011 · 79,748 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg In this video I show you how to make a jig for off center turning. This jig is great for making things like pendants. If you make this project I'd really like to see it, you can always share your projects on my website. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really a


two dollar sharpening jig.avi
By: Cap'n Eddie Castelin
December 20, 2010 · 829,840 views

This is a 2 sharpening jig for the Ellsworth type deep fluted gouge. See my website: www.eddiecastelin.com for more. It's best made from a piece of water pipe, but if you can't do that, a piece of schedule 80 plastic will do. See my website: www.eddiecastelin.com for more. I added a revision to this video so you can stop it at the end and print a picture of the sketch. Just hit pause and then file, print. You should be able to get the sketch at the very end.


Wooden Hat Jigs
By: Cap'n Eddie Castelin
August 26, 2008 · 38,881 views

Wooden Hat jigs. As per a workshop by Johannes Michelsen. This is required if you plan on turning a wooden hat.


Return to Turning Videos

Great Bargains
(ends November 27, 2019)

Customized Electric Branding Iron

On Sale for only $99.99

Save $20.00

List price: $119.99

This customized, 110V electric branding iron will let you imprint your woodturnings in way that will never fade away. You will be able to order from fifteen different standard-size design choices, enter your custom text and proof the final design. The delivery of your custom burning head will take 2 - 3 weeks.

Click here for more information or to purchase


Rockler Mini Carbide Pen Turning Tools

On Sale for only $149.99

Save $70.00

List Price: $219.99

This three piece set has comfortable rubber handles which provide excellent control and reduce fatigue—replaceable carbide tips require no sharpening. The 3-piece sets comes with diamond, square and round carbide tipped tools.

Click here for more information or to purchase


Bar Tool Turning Kits

Get the 5 Piece Set for only $68.95

Save $15.00

Everything you need to turn out cocktails that friends will rave about—includes all five of their Bar Tool Turning Kits in one cost-saving package. Includes: bottle opener, double jigger, muddler bar, bar spoon, cocktail strainer and 5 threaded inserts.

Click here for more information or to purchase

Pen Press/Drilling Jig

For only $89.99

Save $10.00

List Price: $99.99

Drill and assemble your pens perfectly with flush fittings and a smoothly-operating mechanism! This dual-purpose jig takes care of both prep work and assembly. It holds your blank firmly in position for drilling, creating a precise, perfectly centered hole the entire length of the pen. Later, it smoothly presses your parts together without any bowing or misalignment. Notched jaws automatically center the blank for drilling, while two countersunk holes center the parts during assembly. Large clamping wheel provides slow, controlled pressure so you'll never crack a casing again.

Click here for more information or to purchase

Trend® Air Circulating Airshield Pro

For only $369.99

Save $30.00

List Price: $399.99

Protect your lungs, face and eyes during virtually any woodworking task with the air-circulating Trend® Airshield Pro. Its built-in fan circulates filtered air to prevent fogging, provide cooling and protect users from dust particulates down to 0.6 microns in size at a 98% efficiency rate. This model also meets ANSI Z87+ standards for eye-protection. It features an improved headband with a ratchet suspension and pivoting nape back strap for enhanced comfort, fit and durability. The nickel metal hydride battery allows for up to eight hours of operation on a full charge, twice the length of previous models. Includes a charger, airflow indicator and pre-installed plastic film overlay to prevent buildup of sap after heavy turning jobs, and to prevent scratching.

Click here for more information or to purchase

Great Bargains
(ends December 24, 2019)

Denim Woodturner's Apron

On Sale for only $17.99

Save $12.00

List price: $29.99

This is a one-size fits all, heavy duty denim apron with a soft-cloth collar and criss-cross shoulder straps. It even includes a pencil pocket.

Click here for more information or to purchase


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase


Sorby 6-Piece Woodturning Set with Book and DVD (Woodturning: A Foundation Course)

For only $229.99

Save $100.00

List Price: $329.99

Robert Sorby's flagship set of turning tools is designed to fill the needs of woodturners from beginner to professional. These high-quality tools will shorten the learning curve for those just starting out, and are sure to impress the seasoned woodturner. The set comprises six of Robert Sorby's core range of tools: a roughing gouge, spindle gouge, bowl gouge, skew, parting tool and scraper. Each tool is crafted from the highest quality high speed steel, and married to a comfortable handle turned from solid ash. The set arrives in a high quality box that provides an attractive presentation as a gift, and practical storage thereafter.

Click here for more information or to purchase

Dust Right® Lathe Dust Collection System

For only $39.99

Save $20.00

List Price: $59.99

This highly adjustable steel boom arm holds a semi-cylindrical dust scoop that closely cups your small turning projects, capturing nearly all dust!

Click here for more information or to purchase

Excelsior Mini Lathe

For only $229.99

Save $70.00

List Price: $299.99

The Excelsior 5-Speed Mini Lathe can turn bowls of almost 10" in diameter and spindles up to 17-3/4" in length, making it perfect for chair legs, small table legs and an endless array of decorative turnings. A convenient door provides easy access to the belt, along with 5 different speeds: 760, 1100, 1600, 2200 and 3200 RPM. Cast-iron body provides mass for minimal vibration, stable turning and maximum durability.

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Hunter Woodturning Tools

(Click any Ad to go to our Sponsor's Website)