Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Shop Tours Videos (73)

Sort by

Or click here to: Search All Videos


First Look at the NEW SHOP!!
By: DIY with Uncle Cy
May 10, 2017 · 986 views

FINALLY!!! I took the first load of tools and equipment to the new shop today. So here is a peek at what I have to work with. https://www.patreon.com/UncleCyswoodshop Facebook: https://www.facebook.com/UncleCysWoodworking/ Twitter: https://twitter.com/CyrusFillmore Etsy: https://www.etsy.com/shop/UncleCysWoodworking?ref hdr_shop_menu

 

Channel and Shop Update
By: Casey Martin
November 14, 2016 · 388 views

Hey everyone I just wanted to make a super quick and short video showing off my new camera and letting you guys know a little bit about it. I also show my new HDPE sheet, as well as the computer I built to edit my videos on. Enjoy! My blanks: https://www.classicnib.com/pen-blanks/wine-country-hybrids-by-casey-martin My site: www.winecountrypens.com My email: casey@winecountrypens.com

 

Shop Tour
By: Landon Craig
April 12, 2016 · 75 views

Shop tour and notification of subscriber giveaway

 

Shop Update
By: RJBWoodTurner
March 06, 2016 · 2,478 views

I wanted to give a quick shop update as well as say thank you to some of the very generous people who have sent me wood and other things over the past few months. Regards, Bob

 

Woodturning Workshop Classroom 360º
By: Craft Supplies USA
February 19, 2016 · 1,755 views

360º video of our Woodturning Workshop Classroom at Craft Supplies USA. Visit us: https://www.woodturnerscatalog.com?utm_source youtube&utm_medium description&utm_campaign videos

 

Woodshop Tour 06 Lathe next to the Bed :-)
By: Dipa Das
January 27, 2016 · 5,047 views

How to organize space 3x4m to Kitchen with Stove, Bedroom, Bathroom, Woodshop and of course Woodturning Studio and Meditation space? Look.. :-)

 

#56 Shop Tour and Bandsaw Mod
By: DIY with Uncle Cy
January 24, 2016 · 491 views

So here is my first video of the year. I am showing the modifications to the shop and modifying my 9 inch band saw to cut larger projects (kinda). I was feeling kinda goofy while making this so prepare for a lot of not so funny jokes at my own expense.

 

A day in the shop with Grandpa by Al Furtado
By: Rebel Turner
January 19, 2016 · 871 views

Turning a carrot wood bowl with my Grandson

 

New workshop chat, Symposium, and first local demo.
By: Templeboy Turnings
November 15, 2015 · 721 views

A short video discussing my moving to a new workshop, an update on the UKIWS symposium and attending my first local market, and doing my first Demonstration. Title music :- http://www.bensound.com/royalty-free-music (Thank you) UK and Ireland Woodturning Symposium web page :- http://www.ukiws.co.uk/ UKIWS Gold Sponsor Oliver's Woodturning :- https://www.oliverswoodturning.co.uk/ Axminster :- http://www.axminster.co.uk/ UKIWS Silver Sponsor :- http://www.taylorsmirfield.co.uk/ Bronze Sponsor :- http://www.hampshiresheen.com/ Dromore West Autumn Market :- https://www.facebook.com/events/1493627157600748/ Templeboy Turnings Facebook page :- https://www.facebook.com/profile.php?id 100004634207607&ref ts&fref ts Carl Jacobson and Alan Stratton 2015 Christmas Challenge :- https://www.youtube.com/watch?v KnPEz-X-T34&list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Thank you for watching, please Like, share and if you haven't already please subscribe. Steve.

 

workshop finnished
By: Gary Harris
November 09, 2015 · 88 views

This is my finished workshop

 

October shop udate
By: Custom Chris
October 07, 2015 · 1,459 views

Come to my Etsy Store and get a hand made Aluminum Tool Handle https://www.etsy.com/shop/CustomChrisWoodworks For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Quick look around the workshop
By: Harry’s Woodcraft
October 07, 2015 · 9,833 views

This video is just a quick look around the workshop And some of the changes that I have made, with the intention of trying to give myself more workspace, and the change in direction that I am making. In my working life I was an engineer, but woodworking has always been one of my hobbies, along with ham radio and dog training. about two years ago I started to get into wood turning, a process which I am still very much learning, I enjoy it so much that I have decided to concentrate on wood turning, my scroll saw and very small woodworking projects, the larger projects are getting a bit much for me now, I'm slowing down in my old age, or just getting lazy haha. I have not gone into great detail in this workshop tour, but if you would like any more information on any of the equipment or anything else on this video, please leave a question in the comments section and I will be only too happy to answer you in detail. Thank you for watching, Harry Watts The Little Garden Shed Workshop

 

Episode 9: Finding a Good Price Point and 'New' Workshop Tour
By: M. Saban Smith Woodturning
October 02, 2015 · 3,873 views

This week I show you round the refurbished workshop and the changes I've made, discuss the cherry bowl and also discuss at length, finding the right price point for your work. Links to the channels mentioned: Mike Waldt: https://www.youtube.com/user/TheCymruBoy Templeboy Turnings (Steve Twydell): https://www.youtube.com/user/stevo15771 Woodslee Summercraft (Rob Summerlin): https://www.youtube.com/channel/UCSTl-BQomeXoJqevZ_MxpOw Hampshire Sheen: http://www.msabansmith.com/shop/finishes/hampshire-sheen You can read more about this project, see images, and possibly make a purchase on my webs

 

NewShopUpdate
By: Custom Chris
September 17, 2015 · 1,167 views

Come to my Etsy Store and get a hand made Aluminum Tool Handle https://www.etsy.com/shop/CustomChrisWoodworks For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

#31. New chuck and workshop review
By: Keith Barrow
September 11, 2015 · 2,513 views

Here I take delivery of a new chuck kit,and look round the workshop to show what's been going on for the past 9 months. Link to Rutlands: http://www.rutlands.co.uk/pp woodworking-power-tool-accessories-woodturning-accessories-wood-turning-chucks-precision-scroll-chuck-v5 c16201

 

New Old Shop Update
By: Custom Chris
September 04, 2015 · 1,842 views

Come to my Etsy Store and get a hand made Aluminum Tool Handle https://www.etsy.com/shop/CustomChrisWoodworks For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Episode 5: New Lathe, Workshop and Giveaway Winners
By: M. Saban Smith Woodturning
September 04, 2015 · 1,539 views

Another week goes by without much in the way of turning done...but I have been really busy in the workshop as you'll see in this weeks Turner's Journey. Also in this episode, I announce the winners of the Hampshire Sheen giveaway I announced on Monday. All the entrants in the giveaway will receive a 'Thank You' discount code and subscribers to my mailing list will also receive a discount code next week. AND, Hampshire Sheen will be available on the website from tonight (4th September) and I'll be shipping worldwide! You can read more about this project, see images, and possibly make a pur

 

woodturning my old work shop
By: bradturbo44
August 14, 2015 · 128 views

the old work shop

 

Workshop Tour August 2015
By: Perfect Pens and Pencils
August 13, 2015 · 431 views

Its amazing how much stuff can be stored in a small place over 20 odd years !! Well recently I decided enough is enough and it was time to have a big clean up and re arrange. This video is the first of our workshop tours, with other videos to follow as we move towards having a better and more organised Workshop and layout. Feel free to leave us some comments if you have any ideas or suggestions for our Workshop as it would be good to hear from others experiences that have gone before me.I created this video with the YouTube Video Editor (http://www.youtube.com/editor)

 

Episode 1: Workshop and Wood
By: M. Saban Smith Woodturning
August 07, 2015 · 5,468 views

Welcome to episode 1 of Turner's Journey. Take a look around the remodelled workshop and find out some video production plans I can put into place straight away for becoming a full time turner. I'm sure the content quality of these episodes will improve with time and note making! Thanks for watching. Keep even more up to date at http://www.msabansmith.com Keep up with my socially! Facebook: http://www.facebook.com/msabansmith Twitter: http://www.twitter.com/msabansmith Google : https://plus.google.com/ Msabansmith/ Instagram: https://instagram.com/msabansmith Small print and Disclaimer: This video is not intended to be a tutorial on how to turn wood like that shown in this video. The methods I employ may or may not be in best practice and you are responsible for your own safety and following all manufacturers guidelines etc. Please stay safe when wood turning or anything else you choose to do! Thanks.

 

Shop tour and updates
By: Ian Maude
August 07, 2015 · 411 views

A quick shop tour and update on the banjo project. Also a start on pen turning

 

Workshop Tour and Show Prep (Part 1)
By: M. Saban Smith Woodturning
July 13, 2015 · 1,797 views

In my last video, I mentioned that I am attending a three day show starting next week, so in this video I thought I would share a little tour of the workshop and a vague overview of the wood I have in stock at the moment that I intend to turn in time for the show. Hopefully, I'll be posting a daily vlog in a new playlist documenting what I've been up to and if I get time, a brand new turning video of a specific project. What it will be, I have no idea at all! Thanks for watching! You can read more about this project, see images, and possibly make a purchase on my website at http://www.msaba

 

There's a Beauty in my shop
By: Carl Jacobson
July 10, 2015 · 13,390 views

The American Beauty has arrived! Just a quick walk around to show some of the great features on this lathe. This is a lathe review of the Robust American Beauty. I'M AM ALSO A ROBUST LATHE DEALER IF YOU HAVE ANY QUESTIONS I'D BE MORE THAN HAPPY TO HELP! jacobson68@yahoo.com RZ Mask: https://rzmask.com/ Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order I upload a new project video every Friday, and I'm live Monday on YT and Friday on Twitch. Check out

 

Shop Update June 2015
By: Turning Round
June 27, 2015 · 177 views

This is a quick catch up on whats going on around my shop. It is bit about the shop and a bit about the project I am working on.

 

Woodturning Workshops Tour at Craft Supplies USA
By: Craft Supplies USA
June 22, 2015 · 12,005 views

Take a tour through our newly remodeled Woodturning Workshop facility. Learn more: https://www.woodturnerscatalog.com/cl/8/Workshops?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Our Workshop Facility at Craft Supplies USA is the finest in the world with top quality tools and equipment, state of the art double video display and a fully equipped workstation for every student. Join us for a woodturning experience of a lifetime at America's premier woodturning school. Make new friends, expand your

 

Maple Shipment and what's up in Sam's shop?
By: WYOMINGWOODTURNER
June 03, 2015 · 3,213 views

Sam receives a box of hard maple. He is able to chase threads in the wood!!! He answers a few questions and shows some current work in progress. Walter can be contacted at: waltamb@npacc.net

 

Changing my shop layout (for lathes) Sam Angelo
By: WYOMINGWOODTURNER
May 10, 2015 · 4,201 views

Sam Angelo finally sold his table saw and shows what he did with the added space. More room for his lathes.

 

#21 Camera Crane and Workshop Tour - Wood Turning - Acolyte Turner
By: Tom Stratton
April 30, 2015 · 1,931 views

In my latest video I give a short tour of my workshop and show how I have overcome some of the problems of video recording, including the use of a jib / boom / crane and multiple cameras. Further projects, turnings and information can be found at http://tomturns.com Mention of trade names or commercial products does not constitute endorsement by The Acolyte Turner (Tom Stratton) except where explicitly stated. All brand and product names are trademarks or registered trademarks of their respective companies and are hereby acknowledged. TAGS Acolyte Turner, Acolyte, Turner, Wood Turn

 

A day in the shop without shavings Al Furtado
By: Rebel Turner
April 29, 2015 · 687 views

Last 2 days of shop upgrading, I built some very needed cabinets under my work bench and fine tuned a few item that should make things easier for future projects.

 

WoodshopTour 01 Makita Bandsaw Review & Tuning (in Slovak language)
By: Dipa Das
April 13, 2015 · 107,347 views

This is first video from set 'Woodshop Tour' where i would like to show some tools & tips & tricks from my woodshop.. This is about Bandsaw Makita LB1200F and how to make two supporting tables.. Prvé video zo série 'Woodshop Tour', kde bych vám rád postupne ukázal nástroje s ktorými pracujem, tipy, triky, vychytávky a vylepšenia.. Toto video je o Pásovej píle Makita a ako si vyrobiť dva podporné stolčeky.

 

SJ Shop Tour
By: SJWoodworks
March 19, 2015 · 2,037 views

New house, new garage, new tools, new shop. Check it out right here, and tell me what I need to do to make it better! Any glaring gaps in my tool arsenal, any suggestions for organization or safety issues?

 

Tokar Art 07 - WoodTurning Workshop
By: Dipa Das
March 14, 2015 · 3,585 views

This video is about Basics of WoodTurning.. Workshop for my Friend Alex (in Slovak language).. Prišiel Priateľ Alex, že by sa rád priučil niečo z Tokárstva.. Tak vznikol tento (skoro celovečerný) film popisujúci Základné postupy Sústruženia dreva.. Alex videl prvýkrát Sústruh na Drevo a po niekoľkých hodinách pod Dípovým intenzívnym vedením :-) odchádzal s krásnou miskou Golden Maple - Zlatý Javor..

 

#5 Shop Tour
By: Yuval Lahav Woodturning
February 14, 2015 · 2,845 views

My shop is small, yet it's all I've got, and on this day you are more then welcome to it. Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Wood Turning Workshop tour
By: Wood Shed Turning
January 31, 2015 · 1,880 views

A brief intro in to my new workshop set up Jan 2015 by me Graham Newbury a hobby wood-turner.

 

Woodturning - some projects - shop tour - tips
By: Marc 's Oneway of turning
January 28, 2015 · 1,749 views

Thanks to my new suscribers; thanks for your nice comments on my previous video. Be safe be good.

 

Make the most from a small shop
By: Rebel Turner
January 23, 2015 · 781 views

I took this opportunity to go through my shop and rearranged tools as well as built in cubbies to maximize my workspace. A close up on how to turn a 12' disk sander to 14' It's amazing the space you can add just by rearranging tools.

 

I almost burned my shop down today!
By: Adze Woodturning
January 21, 2015 · 324 views

Be careful if you have a woodstove in your shop.

 

SJWood Shorts - Happy New Year! and shop update
By: SJWoodworks
December 31, 2014 · 639 views

It's been a while since my last video, and it may be a few weeks until my next. We're moving! That means electrical work, a new work surface or two, and figuring out how to safely move the lathe, bandsaw, etc, to the new place. Wish us luck! May the new year bring you all happiness and success. See you in a few weeks!

 

Woodturning Shop a Work in Progress
By: Adze Woodturning
December 13, 2014 · 425 views

A tour of the woodturning shop of Adze Woodcraft and Sundry. A work in progress. Let me know what you think or if you have ideas for improvement. Thanks for watching.

 

59 - Waxhaw Woodturners-Sun City Workshop - 29 March 2014
By: Waxhaw Woodturners
October 09, 2014 · 2,115 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Sun City-Waxhaw Woodturners Workshop Agenda March 29, 2014, 1 p.m. - 6 p.m. 0m14s - Deryk Stryker - Welcome comments and introductions 1m15s - Tom Glaze - Talk about our clubs community activities 11m42s - Daniel Brinneman - Introduce Waxhaw Woodturners 14m58s - Wally Drexler - Demonstrate cutting flutes on a lathe 26m16s - Roland Hege - Tops, mushrooms, toothpicks, flowers, trees, golf tees, etc. 51m33s - Jack Funk - Nat

 

Wood Turning #92 A Shop Tour
By: The Tiny Trailer Workshop
September 20, 2014 · 6,335 views

A shop tour... what could be easier! Just take a wander around the shop and say what's what! But then when you get out there to do it... well you forgot about this piece or that... and then there is all the stuff that you did talk about that really didn't need to have that kind of coverage! My little shop is filled to the rafters with the things I think I may need... and of course there may be one or two things that I don't really need... but somewhere along the way... I hate to say this but it took me 3 days of cleaning to get it to a point where I felt it was clean enough to pass even Mi

 

Wood Turning #92 Texted A Shop Tour
By: The Tiny Trailer Workshop
September 20, 2014 · 1,421 views

A shop tour... what could be easier! Just take a wander around the shop and say what's what! But then when you get out there to do it... well you forgot about this piece or that... and then there is all the stuff that you did talk about that really didn't need to have that kind of coverage! My little shop is filled to the rafters with the things I think I may need... and of course there may be one or two things that I don't really need... but somewhere along the way... I hate to say this but it took me 3 days of cleaning to get it to a point where I felt it was clean enough to pass even Mi

 

Workshop
By: Gordon Millar
August 26, 2014 · 50 views

The Evidence of the making of a Segmented Bowl.

 

First Video and Shop Tour
By: John Williams
August 13, 2014 · 1,560 views

Introduction and shop tour with a little humor

 

The Blind Wood Turner - Episode 3
By: Blind Woodturner
August 07, 2014 · 1,676 views

This week I will be giving you an insight into the tools, lathe and other equipment I have and use in my workshop.

 

Workshop Tour
By: H F Bowern Designs - Harold Bowern
July 26, 2014 · 2,662 views

A quick look around at my car and half garage shop. A place of refuse and a place to be creative. Subscribe and join me in my workshop endeavours. See you in the Workshop!

 

Tim Yoder Shop Tour 2014
By: woodturningwithtim1
June 21, 2014 · 7,912 views

There have been many changes to Tim's shop in the past several months, so it's time for another tour!

 

Wood Turning - Secrets for a clean Workshop
By: Mike Waldt
May 08, 2014 · 22,253 views

I tell you some Tips and Tricks to get a clean Workshop. Here's the link to The Naked Turner's Channel: https://www.youtube.com/channel/UCfdxhrmOgVlW4le9B3T34JQ

 

wood working, shop tour, pen turning
By: chuck russell
April 09, 2014 · 2,217 views

Quick shop tour and little bit bout what goes on around the shop, you can see a lot of my work at Three Leaves Carving on Face book.

 

My Small Shop Solution
By: Bob Hamilton
March 01, 2014 · 36,127 views

This is a project I made that is quite specific to my need for a solid work surface that doesn't take up any room in my small workshop. It is unlikely that anyone else has the same requirements that I do so it may be of limited interest to most, but I am kinda proud of it. :D

 

Robbies bassic woodturning shop talk
By: Robbiethewoodturner
November 20, 2013 · 6,401 views

here is a little talk about me and woodturning and a little shed shop view. link to my new web site http://robbiethewoodturner.net/ http://www.youtube.com/user/Robbiethewoodturner This video was produced and made by Robbie power Copyright All Rights Reserved

 

Workshop Tour
By: Bill Thomas
November 06, 2013 · 536 views

A Brief Tour of My Workshop

 

Woodturning Shop Tour
By: Carl Jacobson
July 18, 2013 · 12,620 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

A Tour of Tim Yoder's shop
By: woodturningwithtim1
April 05, 2013 · 45,414 views

Tim takes you on a tour of his shop.

 

Workshop Tour
By: Brendan Stemp
April 01, 2013 · 6,231 views

I thought it might be of some interst to some to show you around my workshop. I filmed this after a week of working so the workshop is messy with tools left where they were last used. Unfortunately, I don't get paid to clean my workshop so it tends to be a low priority.

 

tournage sur bois: mon atelier - Woodturning: my workshop
By: Laurent Cortot
March 30, 2013 · 5,983 views

Visite rapide de mon atelier Quick Tour of my workshop

 

45 - Jerry Measimer - Mini-Hat Workshop - 22 Sept 2012
By: Waxhaw Woodturners
January 21, 2013 · 1,301 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Daniel Brinneman http://www.lionsdendesigns.com Video by Daniel Brinneman. https://danielbrinneman.com

 

Update Dec 4 2012
By: Bob Hamilton
December 11, 2012 · 4,098 views

This is a 'shop tour' type update of what I have been doing for the last few months that has been keeping me from uploading any new videos.

 

Woodshop Tour
By: Carl Jacobson
August 24, 2012 · 20,590 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. A shop tour with a litte juggling :-) - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

2012-06-09 Virtual Shop Tours by GWA Members (1h46m48s)
By: Gwinnett Woodworkers
August 14, 2012 · 1,300 views

GWA Class 06-09-12 As a departure from the club's annual shop tour, this class featured projected images and narration by various GWA members regarding their own woodworking shops. 8 members contributed to the virtual tour in a question-and-answer format, discussing many ideas including custom fixtures, dust collection and shop-made accessories. Full Video (1:46:41) Filmed and uploaded in HD.

 

Wood Turning - Shop Tour 2
By: Mike Waldt
August 02, 2012 · 8,109 views

A brief video showing a few changes to my workshop area.

 

Wood Turning - Shop Tour
By: Mike Waldt
June 26, 2012 · 22,219 views

A brief glimpse at my workshop area.

 

In the Shop with Terry Brown
By: weekendturner.com
April 13, 2012 · 2,739 views

WGNC member Terry Brown gave us a tour of his shop with more pointers on how a professional wood turner works at home....

 

Woodturning Workshops at Craft Supplies USA #2
By: Craft Supplies USA
April 06, 2012 · 4,137 views

Learn the art of woodturning, by taking a woodturning workshop class at Craft Supplies USA. Learn more: https://www.woodturnerscatalog.com/cl/8/Workshops?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Learn the craft of woodturning at America's premier woodturning school. Since April 1983, Craft Supplies USA has earned a reputation as the finest woodturning school in the world. With thousands of woodturners of all skill levels having attended workshops taught by the world's top professionals. O

 

Woodshop Update- 11/03/12
By: ThisWoodwork
March 12, 2012 · 30,120 views

I give you a quick look around the new workshop after my workshop move. A good opportunity to get some ideas about woodshop setup for a small garage woodshop about storage and tool organisation. I show you my new lathe the Axminster awvswl 1200 woodturning lathe or Laguna 1847 lathe. As well as the rest of my tools, the bandsaw, tablesaw, disksander, beltsander, drill press, pillar drill, mitresaw, thicknesser, router table, jointer, fretsaw and more! woodwork woodworking howto how to diy crafts alex harris woodturning woodturner teenwoodworker thiswoodwork turning video projects project make

 

Woodturning Shop Upgrade
By: Getting0Done
March 11, 2012 · 10,657 views

I have been planning on getting a better lathe for about a year now and with a nice tax return, I am able to finally upgrade. I bought a Rikon Wood Fast 70-500 with a 20' swing and a 2 hp motor. I chose this lathe over the rest because of how much you get for the price, all the adapters and rest sizes are common as opposed to say a Oneway in which you have to have two sets of everything if you have two lathes. One problem when I bought it though, electrician wasn't coming for another week. So, I thought it would be best to clear up a few things I wanted to change around the shop and make life easier once I did get turning again. Thanks for watching and please rate, comment and subscribe!

 

Road trip to see Guy Bradbury's Little Woodshop
By: Carl Jacobson
November 23, 2011 · 7,908 views

I had a great time with Guy. I think he's sold on the Easy Wood Tool. He will have a video up soon with a much better angle. I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits https://www.chefwarekits.com/?tracking carl Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com

 

Workshop Update: At the Lathe
By: Brian Havens
November 21, 2011 · 5,089 views

I have been taking a break from longer term 'flat wood' projects to catch up on some turning, including some hollowing and some fun holiday project with the kids.

 

Brian Markham-Limberlost Woodturning-Studio Tour 2
By: Brian Markham-Woodturner
September 22, 2011 · 3,142 views

Part of the Muskoka Autumn Studio Tour, Brian Markham makes burl bowls and platters on his lathe. This a tour of his studio. www.limberlostwoodturning.com www.muskokaautumnstudiotour.com

 

Limberlost Woodturning Studio Tour 1
By: Brian Markham-Woodturner
September 21, 2011 · 10,221 views

Part of the Muskoka Autumn Studio Tour, Brian Markham creates platters and burl bowls in his woodturning workshop. www.limberlostwoodturning.com www.muskokaautumnstudiotour.com

 

Woodshop Tour
By: ThisWoodwork
February 19, 2011 · 26,083 views

I will take a tour of my workshop or woodshop where i do my woodworking and turning. A video to show that you dont need a massive space to start woodworking and you can fit a lot of woodworking and woodturning tools into a small space if you use some space saving tricks or inginuity. May give you a few ideas on how to best use your space to create the most efficent workshop or woodshop in this woodshop / workshop I show my tablesaw mitresaw router table workbench thicknesser or thickness planer jointer dust extractor power tools jigsaw beltsander computer drill press bandsaw etc. which are in my woodshop / workshop. Use the workshop space as well as you can and create the most effiecent and dust free workshop / woodshop possible! Wood work shop turning turner woodturning shed funny project projects alex harris teenwoodworker

 

Woodturning Workshops at Craft Supplies USA #1
By: Craft Supplies USA
May 21, 2010 · 13,362 views

Learn the art of woodturning by taking a woodturning workshop class at Craft Supplies USA. Learn more: https://www.woodturnerscatalog.com/cl/8/Workshops?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Learn the craft of woodturning at America's premier woodturning school. Since April 1983, Craft Supplies USA has earned a reputation as the finest woodturning school in the world. With thousands of woodturners of all skill levels having attended workshops taught by the world's top professionals. Our

 

Woodturning Video of My Shop Carl Jacobson
By: Carl Jacobson
March 11, 2010 · 36,491 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. Basket Weaving Base Lathe Speed & My Shop Tools & Jigs Turning Wood On The lathe - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Return to Turning Videos

Powered by Google

Great Bargains


Uvex Bionic Face Shield with Anti-Fog Coating

On Sale for only $39.99 each

Save $5.00 each


List price: $44.99

Great for turning at the lathe, sharpening at the bench grinder, or wherever safety glasses alone don't provide adequate protection.

Click here for more information or to purchase


Dust Right® Lathe Dust Collection System

On Sale for only $39.99 each

Save $15.00 each


List price: $54.99

This highly adjustable steel boom arm holds a semi-cylindrical dust scoop that closely cups your small turning projects, capturing nearly all dust!

Click here for more information or to purchase


Excelsior Mini Lathe

On Sale for only $249.99 each

Save $50.00 each


List price: $299.99

With solid cast-iron construction, a robust 1/2 hp motor and a precision-machined live center, this little workhorse rivals features found in much larger lathes.

Click here for more information or to purchase


Nova 30th Anniversary G3 Reversible Chuck Bundle with 3 Jaw Sets and Case

On Sale for only $159.99 each

Save $165.98 each


List price: $325.97

Limited edition package includes the G3 Chuck with standard 2'' jaws, plus two bonus jaw sets—4'' jaws and pin jaws—all presented in a sturdy storage case.

Click here for more information or to purchase


Great Bargains on Sale until May 31, 2018


2 oz. Titebond Instant Bond Wood Adhesives (CA Glue)

On Sale starting at $10.40 each


List price normally starts at $12.99

Comes with a specifically-designed pin on the top of the bottle to prevent the glue from drying and clogging when not in use.

Click here for more information on Thin Viscosity

Click here for more information on Medium Viscosity

Click here for more information on Thick Viscosity

Click here for more information on Gel Viscosity


Customized Electric Branding Iron Gift Set

On Sale for only $99.99 each

Save $20.00 each


List price: $119.99

Personalized branding iron gift set lets your favorite woodworker customize their own design and message.

Click here for more information or to purchase


Nova 30th Anniversary G3 Reversible Chuck Bundle with 3 Jaw Sets and Case

On Sale for only $159.99 each

Save $165.98 each (>50%)


List price: $325.97

Limited edition package includes the G3 Chuck with standard 2'' jaws, plus two bonus jaw sets—4'' jaws and pin jaws—all presented in a sturdy storage case.

Click here for more information or to purchase


Nova Comet II 12'' x 16-1/2'' Midi Lathe with Chuck and 5-Piece Turning Set

On Sale for only $549.99 each

Save $50.00 each


List price: 599.99

Value-added combo package pairs a compact, versatile lathe with a chuck and 5-piece set of mini turning tools! Total package value $704.97!

Click here for more information or to purchase


Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Saburrtooth
Woodturning with Tim
From Walnut to Antlers

(Click any Ad to go to our Sponsor's Website)