Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Beginners' Guides Videos (274)

Sort by

Or click here to: Search All Videos


Pucker Factor Avoidance # 114
By: The Wood Whirler
February 02, 2018 · 862 views

Mount you wood property and avoid the pucker factor. Pucker factor is a military slang phrase used to describe the level of stress and/or adrenaline response in a dangerous or crisis situation. The term refers to the tightening of the buttocks caused by extreme fear.

 

Holzdrechseln mit Johann Deutsch
By: johann340
January 29, 2018 · 169 views

Kunstdrechslerei.com Johann Deutsch Kurs Holzdrechseln mit Johann Deutsch Durch den Zusammenschnitt verschiedener Video-Einstellungen sind bei meiner Darstellungen leider einige Lücken entstanden, dafür bitte ich um Verständnis. Dieses Video ist in einem von mir abgehaltenem Drechsler-Kurs entstanden und zeigt die verschiedenen Techniken des Schalen-Drechselns. Es wird als erstes gezeigt, wie ein massives Baumstammteil mit der Kettensäge zugerichtet wird. Anschließend wird ein Stück Holz auf der Drechselbank gedrechselt. Beim Arbeiten wechsle ich mehrmals die Werkzeuge, um den Kursteiln

 

Turning Basics by Jack Morse
By: Gwinnett Woodworkers
January 22, 2018 · 1,150 views

Jack Morse has inspired many Gwinnett Woodworkers members to take up wood turning. Many of those go on to become trainers as well. In this video he goes back to the basics to show you how to get hooked on the hobby. Recorded and presented in HD 01/11/2018 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Must have items for a woodturning shop
By: Geiserwoodturner
January 18, 2018 · 311 views

Watch this video tutorial about must have items in a woodturning shop. In this video I talk about three items that I think every woodturner should have in their shop. I am hoping these tips make it easier for you to turn and provide you with ideas and information to help with tools and turning. Some of these shop tips are my personal favorites. Though simple, these items should be a great addition and value to your shop. What is in this video: Magnets- I talk about different types of magnets. I show how I use magnets in my shop for everything from tool holding on the wood lathe to findi

 

Woodturning one on one lesson by Al Furtado
By: Rebel Turner
January 18, 2018 · 3,442 views

My friend Thomas Kuzia wanted a hands on turning lesson. I think the piece of wood might have been a bit much for a beginner but he did a great job considering. I believe the challenges he had might be a good lesson.

 

Pen Turning 101 Part 6
By: Four Oaks Crafts
January 15, 2018 · 45 views

This video covers how to turn a pen on the lathe. I'll discuss tools and techniques you need to know for turning your first pen.

 

Barefoot Turner - Beginners Woodturning Chisel Set
By: Jake Webb
January 14, 2018 · 208 views

A few thoughts on my first woodturning chisel set and what I might buy/make now. Let me know if I missed something you think is user friendly and good for beginners in the comments. My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

Pen Turning 101 Part 5
By: Four Oaks Crafts
January 14, 2018 · 57 views

This video covers pen blank preparation. I cover measuring your pen barrels, cutting them, drilling the hole, and barrel trimming. These are all the steps you need to perform before putting the blank on the lathe to turn. I'll be using the cigar pen kit for this demo.

 

Wood turning - Quick demonstration of segmented Lidded box!
By: CraftWithAfshin
January 11, 2018 · 3,550 views

---Please also check out these wonderful wood turners--- Mike Waldt : https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w RickTurns : https://www.youtube.com/channel/UCghK0Pjzr5YaZK2SlC2Dftw Carl Jacobson : https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Stuart Arts : https://www.youtube.com/channel/UCrux70rjZflDA6-ypvaH8DQ Heath Knuckles:https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ Aleksey Bek : https://www.youtube.com/channel/UCz-hSlcLGBOfzw9RKs7m_5g M. Saban Smith Woodturning: https://www.youtube.com/channel/UCpHZv5j6vdMmFjXHDBxPLxw Andy Phillip : https://ww

 

Beginner Woodturning In the Workshop with a Friend
By: ThisWoodwork
January 06, 2018 · 8,201 views

My friend Alex came to visit me in the workshop, so in this more casual video we turned a wooden bowl on the lathe. Alex was a complete beginner and demonstrates than making a bowl is actually quite easy! Woodturning may well be that great new hobby to take up in the New Year! ----------------------------------------­---------------------------- Website: http://thiswoodwork.com/ Instagram: https://instagram.com/thiswoodwork/ Facebook: http://www.facebook.com/thiswoodwork Twitter: https://twitter.com/ThisWoodwork Google : https://plus.google.com/ Thiswoodwork ----------------------------------------­---------------------------- This woodworking project and video was built and filmed by Alex Harris. Copyright of Alex Harris, ThisWoodwork 2018

 

Discover woodturning with AAW
By: American Association of Woodturners
December 07, 2017 · 112 views

Learn about woodturning. It's origins, appeal, and how you can get started. Discover woodturning an introduction to the art and craft.

 

AAW Turning to the Future, supporting the education of the next generation
By: American Association of Woodturners
December 07, 2017 · 55 views

AAW's Turning to the Future offers information and resources designed specifically to help teachers, schools, instructors, and other educators, develop programs to teach woodturning skills.

 

AAW welcomes you to the woodturning community! woodturner.org
By: American Association of Woodturners
December 07, 2017 · 74 views

Woodturning is not only fun, it welcomes you into a community of people who gladly share what they know. The articles and videos in the Woodturning FUNdamentals section of this website will help you learn what you need, whether you’re starting a new hobby or plan to become a pro.

 

A different orientation for woodturning by Al Furtado
By: Rebel Turner
December 06, 2017 · 10,976 views

A different way or orienting your wood can give a new possibility and look to your finished project

 

Turn Between Centers Take Two
By: RJBWoodTurner
November 24, 2017 · 2,794 views

As soon as I knew I had a replacement lathe coming I wanted to retry Turning Between Centers. This video is that test and I'm very happy with the results. Regards, Bob Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

George Raeder Design November 17
By: Northcoast Woodturners
November 15, 2017 · 110 views

George explains a few design principles and shows woodturnings that help explain them. He gives pointers on how to develop an eye for good design and what to consider when turning a new piece.

 

Allen Jensen demonstrates how to go from a log to a finished bowl.
By: Rocky Mountain Woodturners
November 14, 2017 · 1,953 views

Allen Jensen demonstrates his techniques for starting with a log, correctly cutting a bowl blank, rough turning, drying and final turning. Ending up with a finished bowl. Presented to the Rocky Mountain Woodturners on November 9, 2017.

 

Pen Turning 101 Part 2
By: Four Oaks Crafts
November 11, 2017 · 306 views

This is Part 2 of my Pen Turning 101 Series. In this video, I'm talking about pen mandrels and how to hold your pen blanks on the wood lathe. My Comprehensive Pen Turning Resource: http://www.fouroakscrafts.com/pen-turning/ Pen Kit Suppliers List: http://www.fouroakscrafts.com/list-of-pen-kit-suppliers

 

Pen Turning 101 Part 1
By: Four Oaks Crafts
November 11, 2017 · 303 views

This video is part 1 of my series Pen Turning 101. In Part 1, I talk about wood lathes. I'll talk about lathe terminology, setup, and cost. My Comprehensive Pen Turning Resource: http://www.fouroakscrafts.com/pen-turning/ Pen Kit Suppliers List: http://www.fouroakscrafts.com/list-of-pen-kit-suppliers

 

woodturning - watch the body movements when turning a spindle
By: woodturner21
October 31, 2017 · 12,849 views

This video was made as a result of requests on social media and is at a diffferent angle to show the body movement and grip on the tool handle while turning a stair spindle.

 

Filos de Gubias
By: TORNEANDO MADERA CON MARIO CANTARUTTI
October 16, 2017 · 5,306 views

 

Woodworking Live 2017 - Getting Started in Woodturning
By: Record Power
October 06, 2017 · 179 views

 

Practicing with a Spindle gouge: Woodturning with Sam Angelo
By: WYOMINGWOODTURNER
October 06, 2017 · 3,847 views

Sam takes a little time to make some basic cuts with a spindle gouge. It is always important to practice your turning skills. In this video he make a 'practice stick' Below is a link to a video in which same turns a thin spindle with a skew chisel. Turning a long spindle just for practice...... In this video Sam uses a skew to put detail into a long thin piece of wood. https://www.youtube.com/watch?v ceGFl_Ic4EU

 

The Importance of Wood Turning Hands on Instruction
By: Mike Peace Woodturning
September 19, 2017 · 1,864 views

I explain why videos and demos and magazines can't replace hands on wood turning instruction if you really want to learn how to turn wood on a lathe. I upload a new wood turning tip every Wednesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Woodturning at 54a. #125 My simple start up guide to segments.
By: Keith Barrow
August 08, 2017 · 5,094 views

I've had a few questions about measuring and calculating segments,so here's an easy to follow method. For your seggy set or centre finder,please go to: http://www.woodturningat54a.com For Yorkshire Grit: http://www.yorkshire-grit.com/ For Hampshire Sheen products: http://www.hampshiresheen.com

 

Woodturning with Tim Yoder...Catches Part 6: Parting Tool
By: woodturningwithtim1
August 01, 2017 · 5,740 views

This is the sixth in a series of videos using slow motion video to explain how woodturning catches happen. This segment covers the Parting Tool and boy are these catches cool! You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Please support our sponsors. Without them we could not bring you these videos. Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. music by Kevin MacLeod 'Exit the Premises' Royalty Free

 

Woodturning with Tim Yoder...Catches Part 5: Skew
By: woodturningwithtim1
August 01, 2017 · 6,140 views

This is the fifth in a series of videos using slow motion video to explain how woodturning catches happen. This segment covers Skews and the trauma they can sometimes inflict. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Please support our sponsors. Without them we could not bring you these videos. Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. music by Kevin MacLeod 'Exit the Premises' Royalty Free

 

Woodturning with Tim Yoder...Catches Part 4: Scrapers
By: woodturningwithtim1
August 01, 2017 · 7,083 views

This is the fourth in a series of videos using slow motion video to explain how woodturning catches happen. This segment covers Scrapers and how they can be tamed with a Relief Grind. Also there is some cool video of exploding bowls! You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Please support our sponsors. Without them we could not bring you these videos. Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. music by Kevin MacLeod 'Exit the Premises' Royalty Free

 

A Learning Experience # 91
By: The Wood Whirler
August 01, 2017 · 1,778 views

This is a look at the parts I edited out of the previous video where my grandson turned a walnut bowl.

 

Woodturning 101 class WoodWhirled
By: WoodWhirled Store
August 01, 2017 · 43 views

Learn how tu turn a pice of wood in a beautiful piece of art. WoodWhirled.com

 

Learning to use the skew
By: Peaceful Woodturner
June 25, 2017 · 31 views

Using the skew to create beads. Come learn with me!

 

Turning Coves
By: Peaceful Woodturner
June 25, 2017 · 22 views

My first attempt to turn coves. Come learn with me!

 

Parting Tool
By: Peaceful Woodturner
June 25, 2017 · 22 views

In this video I practice using the parting tool and discover what it is and is not good for.

 

First Spindle Turning
By: Peaceful Woodturner
June 25, 2017 · 29 views

This is literally the very first time I have ever put wood on my lathe. The piece is scrap wood from stud lumber. Thank you for joining me on my journey into woodturning. I look forward to making, gifting, and possibly selling many things. Your feedback and comments are more than welcome. Please like and subscribe to join me on this journey. Hopefully we'll have a few laughs and learn some cool things about wood and creation.

 

Practical Turning Part 3 - Episode 84
By: Paul Lockwood
June 21, 2017 · 457 views

A 3 part mini series on Practical Turning using scrap softwood, This is part 3 where I use several scrap pieces of shiplap board to create pot to be used in my workshop. Part 1 - Draw / Door knobs https://youtu.be/9l9d2pFhBl4 Part 2 - A mini bowl for the workshop https://youtu.be/aCdpYfOJgcc Part 3 - This Video A small pot to hold Sandpaper, just like a pen pot Music Stars Collide (Instrumental) By Josh Woodward http://freemusicarchive.org/music/Jos... From The Free Music Archive http://freemusicarchive.org CC Attribution 4.0 International https://creativecommons.org/licenses/... Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Discover Woodturning
By: American Association of Woodturners
May 18, 2017 · 458 views

A part of our AAW Toolbox, Discover Woodturning is an online learning portal that introduces the art and craft of woodturning with resources to help get you started as a turner. Join us today at woodturner.org! Happy turning. Facebook: https://www.facebook.com/AAWoodturners/ Twitter: https://twitter.com/AAWoodturners Pinterest: https://www.pinterest.com/aawoodturners/pins/ Instagram: https://www.instagram.com/aawoodturners Music: 'Carefree' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

Cutting Downhill - What It Means
By: Gord Rock
May 16, 2017 · 1,254 views

A quick explanation of the term 'cutting downhill'

 

Physical limits turning
By: Lyle Jamieson
April 13, 2017 · 2,885 views

I have helped many disabled vets and others with physical challenges continue to enjoy turning. This shows my process of turning from a seated position with one hand. I have booked some live demonstrations around the country and Europe from my shop, with my tools, my cameras. If you are interested give me a call. 231-947-2348 lylejamieson.com Welcome to my channel. I have been turning all my life and want to share the techniques I discovered over the years. The first 40 videos on my channel were technique oriented showing different parts of the process. Lately, I have been doing project ori

 

Wood turning - Beginners guide turning Deep Bowl using only round nose scrape!r
By: CraftWithAfshin
April 02, 2017 · 7,384 views

I have setup a patreon account for those that wish to directly support me it is obviously not necessary since every project will also be uploaded here for free :) https://www.patreon.com/TurnWithAfshin Music: Concentration Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

Wood Turning - Beginners Guide #12 - The Parting Tool
By: Mike Waldt
April 02, 2017 · 9,165 views

Segmented Goblet Video: https://www.youtube.com/watch?v fPTn-ymNEOs&t 325s UKIWS: http://www.ukiws.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk

 

Olivers Woodturning - Learn to Turn Episode 3 - Basic Bowl Turning Take 2
By: Olivers Woodturning
March 16, 2017 · 2,034 views

Comments made on episode 2 of Learn to Turn prompted some investigation into the best methods of turning a bowl. In this episode Ed explains and demonstrates the differences and then moves on to look at bowl reversal. Oh and you get to meet Lucky the workshop cat.

 

Olivers Woodturning - Learn to Turn Episode 1
By: Olivers Woodturning
February 15, 2017 · 2,592 views

Ed Oliver from Olivers Woodturning presents Learn to Turn episode 1. We are putting together videos on how to turn wood the safe way. These videos aim to help people that want to or have recently taken up woodturning and would like to find out how the various woodturning tools are used. In this video we look as basic safety, the lathe and some of the basic tools we use and what they are used for.

 

Getting Started in Woodturning with Sam Angelo
By: WYOMINGWOODTURNER
January 26, 2017 · 8,754 views

How to begin in Woodturning is an important topic. While no video can answer all your questions or provide all the information you need Sam mentions some areas that you can explore while you begin the journey into woodturning. Important Links: AAW http://www.woodturner.org Chucks and Jaws Video Playlist: https://www.youtube.com/watch?v --YXfu50ggg Tools and Sharpening: https://www.youtube.com/playlist?list PLL5-IWEcq6B9ys5mZh6aQvshl7iTnb4Fu Playlist on wood lathes: https://www.youtube.com/playlist?list PLL5-IWEcq6B9xoma9pNMFmR0hfWM-TGbp

 

Balancing the grain for beginner Woodturners
By: Nick Rosato
January 26, 2017 · 43 views

 

Woodturning Basics - Beginner Balancing Grain
By: Nick Rosato
January 23, 2017 · 355 views

This is the basic approach to balancing grain for wood bowls. (made with #spliceapp - http://get.spliceapp.com)

 

Nick Agar woodturning workshop at Carl Malmstens Furniture Studies
By: Tormek Sharpening Innovation
January 13, 2017 · 1,894 views

Join us as we visit Carl Malmsten Furniture Studies in Stockholm together with Nick Agar, Tormek friend and professional woodturner from Devon, UK. We did a lot of sharpening – but first, here are some highlights from the woodturning workshop for students and staff where Nick shared some tips on techniques. Carl Malmsten Furniture Studies in Stockholm is a part of Linköping University and the only education in Sweden offering an academic degree in Furniture making and Design – combining practical, theoretical and artistic courses – attracting Swedish as well as international students. Read more about the Tormek Sharpening System at https://www.tormek.com

 

TEACHING MY FRIEND HOW TO WOODTURN!
By: Nick Zammeti NZ WoodTurning
January 01, 2017 · 4,342 views

MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ ………………………………………………………………………………………………………………………………………………………. PLEASE NOTE: IF YOU ARE SENDING ME A GIFT, PLEASE COULD YOU PLACE A LOW VALUE ON THE PACKAGE YOU ARE SENDING. THANK YOU. ………………………………………………………………………………………………………………………………………………………. SEND ME STUFF FAO NICK NZ WOODTURNING PO Box 363 ROMSEY SO51 1DY UNITED KINGDOM ………………………………………………………………………………………………………………………………………………………. PLEASE NOTE: IF YOU ARE SENDING ME A GIFT, PLEASE COULD YOU PLACE A LOW VALUE ON THE PACKAGE YOU ARE SENDING. THANK YOU. ………………………………………………………………………

 

Grandson's First Bowl # 59
By: The Wood Whirler
December 22, 2016 · 1,158 views

My grandson wanted to learn to turn. So here is his very first stab at it.

 

Estrarre punta trascinatrice
By: Livio Maritati
November 15, 2016 · 1,461 views

Quando la punta trascinatrice si incastra nel canotto del tornio occorre ricorrere ad un apposito utensile per spingerla fuori. Se quello in dotazione non è più in grado di svolgere il suo compito, in seguito a delle modifiche al tornio, bisogna costruirsene un altro, se mai riciclando del materiale di recupero.

 

Outboard Woodturning 35in mandala part 1
By: Boston Woodturning
October 22, 2016 · 956 views

Outboard Woodturning 35in mandala from old table top. Part 1

 

Add a Few Beads to Woodturning
By: Mike Peace Woodturning
October 14, 2016 · 2,697 views

I demonstrate the tools and techniques I use to add beads to bowls, hollow forms and boxes or other woodturning projects. I show how to make and use a beading tool from an old spindle gouge. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Woodturning Back-to-Basics #5 Sharpening Jig and Abranet Sandpaper.
By: Carl Jacobson
September 30, 2016 · 12,541 views

In this episode of back-to-basics woodturning I'll go over sharpening jigs, Abranet sandpaper, and roughing cuts vs finishing cuts. CBN wheels http://woodturnerswonders.com/ Sharpening jig http://astore.amazon.com/thewood0c-20/detail/B000CSQONC Reed Gray http://www.robohippy.net/store/ Grinder http://astore.amazon.com/thewood0c-20/detail/B00H2B78YG Abranet sandpaper http://www.turningwood.com/blog/abranet-rolls/ Here's a link to some of the tools I use in my videos, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking

 

Stuart Batty - How Gouges Cut
By: Rocky Mountain Woodturners
September 22, 2016 · 35,472 views

Demonstration given to the Rocky Mountain Woodturners by Stuart Batty on 'How Gouges Cut'. September 8, 2016. Describes how wood is cut by different gouges and techniques for sharpening them.

 

Spindle gouge woodturning 101
By: Theo the Woodturner
September 03, 2016 · 2,095 views

How to enhance your enjoyment of woodturning using the lady fingernail grind spindle gouge.

 

Wood Spindle Turning
By: Century Porch Post
August 24, 2016 · 361 views

2 1/2' square x 22' in length turned spindle exclusive to Century Porch Post. This spindle compliments our New Hampshire porch post and has become extremely popular.

 

Great Skill Building Project For Woodturners
By: Carl Jacobson
August 12, 2016 · 10,869 views

Starter projects for woodturners! When you’re getting started with woodturning, it’s natural to look for projects that are easy to complete while still teaching basic lathe skills. Workshop projects like chisel handles are a great place to start, but when you’re ready to make items suitable for use in your home, utensil handles are a great project for new woodturners. Tools I used in the video- Robust Lathe: http://thewoodshop.tv/robust-lathe/ Ruth Niles Mandrel-http://astore.amazon.com/thewood0c-20/detail/B00L5OR4X6 Utensil kits-http://www.chefwarekits.com/carl-jacobson-video Spindle Gouge-

 

9 year old future wood turner
By: Jeremy Edwards
August 05, 2016 · 2,283 views

I'm giving my 9 year old son a lesson on the lathe for the first time. Awesome experience! I could see that he was soaking it all in. Hopefully it sparks an interest for woodworking. Enjoy.

 

Woodturning Back-to-Basics #3 Turn a bowl without a chuck
By: Carl Jacobson
July 29, 2016 · 62,296 views

I started this series to help new turners with a few tips I've learned after 23 years of woodturning. In this episode I go over how to turn a bowl without a chuck, and different types of waste blocks. Tip Top Tools doddie14@sky.com Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and o

 

Eric Gourieux Demonstrates Roughing a Bowl Blank from a Log
By: IKI Woodturners
July 27, 2016 · 313 views

IKI Woodturners Club July 10th, 2016 Meeting: Eric Gourieux Demonstrates Roughing a Bowl Blank from a Log

 

Using a bowl Gouge
By: Walter Wager
July 25, 2016 · 54,244 views

Video shows how to use a bowl gouge stressing the difference between spindle and cross grain work.

 

Getting started in wood turning - Part 3
By: Turning Works
July 23, 2016 · 751 views

In this video I prepare the blank to put in a dovetail chuck. Please SUBSCRIBE to my channel and give a thumbs up if you like it. If not, then leave a thumbs down AND a comment why so I can improve my content.

 

Between Centers 1: Woodturning: Turning an acrylic bottle stopper
By: Rock Springs Woodturner
July 22, 2016 · 3,820 views

Between Centers 1 This begins a video series on many topics related to spindle turning while making actual projects. Topics such as mounting the blank, tool selection, tool rest height, turning speeds, finishing, turning different materials, side grain and end grain turning, just to mention a few.

 

Woodturning: Weed Pot, Hillbilly Pot or Twig Pot Version 2
By: Rock Springs Woodturner
July 19, 2016 · 244 views

Woodturning, weed pot, hillbilly pot. This is a new upload of the other video of the same content. I used YouTubes enhancement tools on the other one and that didn't work out so good, so here it is and I hope with the video and voice in sync.

 

Getting started in Woodturning - Part 2
By: Turning Works
July 18, 2016 · 1,152 views

Hi again! In this video we actually turn the square blank of wood between centres into a round blank for use later. It is very useful to get used to the different sounds your tools make when turning. Next episode will be getting this blank from between centres to mounted in the chuck. Thank you for watching - if you like it give it a thumbs up - if you don't, then give it a thumbs down - but give a reason below!

 

Using a spindle gouge
By: Walter Wager
July 13, 2016 · 6,003 views

Video demonstrates the use of a spindle roughing gouge and spindle gouge. Shows techniques for securing blank between centers, and illustrates the difference between a spindle gouge and bowl gouge

 

Simple (But Elegant) Bowl: Beginners Woodturning Project
By: M. Saban Smith Woodturning
July 07, 2016 · 57,259 views

This week I demonstrate how to turn a simple bowl for those learning woodturning through YouTube or those looking to see other turner's techniques. A simple but elegant 6x2' sycamore bowl. See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list! Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com Something else of interest: Read my FREE newspaper at http://ww

 

How to Make a Simple Segmented Blank
By: RJBWoodTurner
July 02, 2016 · 7,563 views

This is a super simple and incredible looking blank that anyone can make. You'll love the look of your finished pen. Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Getting started in Wood turning - Part 1
By: Turning Works
June 25, 2016 · 3,005 views

This is my first video on YouTube - please be gentle! I am a novice wood turner, but would like to share some points for people who have just bought a lathe and don't have a clue what to do. if my video helps just ONE person I'll be happy! THANKS FOR WATCHING! :D Please comment below if you would like to suggest future video topics or have any constructive criticism.

 

Woodturning Back-to-Basics Episode #2
By: Carl Jacobson
June 24, 2016 · 19,100 views

I started this basic woodturning series to help new turners with a few tips I've learned after 23 years of turning. In this episode I go over how to cut a tenon to get the best fit in your chuck. We'll also go over the bevel angle, and sanding pads. Sanding pads are the best way to sand out end grain. Here's a link to some of the tools I used in the videos, http://astore.amazon.com/thewood0c-20 I upload a new video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your su

 

Bowl Turning Basics with Stuart Kent
By: EasyWoodTools
June 07, 2016 · 6,171 views

The first in a series of tutorial videos presented by Easy Wood Tools with Master Woodturner Stuart Kent. This video teaches the process to turn a bowl from start to finish using rough-sawn green cherry wood, using the Easy Wood Tools woodturning system. #woodturning #easywoodtools #ncfurnitureschool Filmed at www.ncfurnitureschool.com

 

Woodturning
By: Desmond Shore
May 30, 2016 · 92 views

Turning wood on woodlathe

 

Woodturning Back-to-Basics Episode #1
By: Carl Jacobson
May 27, 2016 · 38,656 views

I started this series to help new turners with a few tips I've learned after 23 years of woodturning. In this episode I go over a few tips for using the skew chisel, and the bowl gouge. I also talk about the sanding pad I use, and how to sand out end grain. Also a quick tip for sharpening gouges. Steve/Woodturner21 https://www.youtube.com/user/woodturner21/feed I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop h

 

'Magic' Mushrooms - Beginners Woodturning Project
By: M. Saban Smith Woodturning
May 11, 2016 · 24,527 views

In the beautiful UK sunshine, I take a note from nature and demonstrate how I wood turn mushrooms on the lathe using basic tools in this weeks beginners project. A great skill builder with a world of creative possibilities to consider, as well as some little challenges too. There's nothing rotten about this fungus...I like to think I am a bit of a 'fun-guy'. Lol. See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free video

 

Differences in a Bowl Gouge and a Spindle Gouge
By: Rich McNatt
May 08, 2016 · 14,191 views

A short chat on spindle and bowl gouges.

 

Beginners Wood Turning: Bowls, Boxes, Goblets & Offset Turning
By: woodturnernubie
May 04, 2016 · 424 views

Welcome to my 1st youtube video. 3 months ago I decided to take up wood turning. I have watched many great youtube channels for ideas and inspiration. In this video I show all of the bowls, boxes,goblets and off set turned items that I have created. I hope you like what you see. Please let me know what you think in the comments below the video. Music in this video: Track: crunkbanjo Artist: lordandrew88 Copyright newgrounds.com Thanks for watching :)

 

Crossing Over with...., Parting tools: woodturning with Sam Angelo
By: WYOMINGWOODTURNER
April 27, 2016 · 3,665 views

In this series, Sam discusses how 'side grain' and 'end grain' are approached with parting tools. In this video he makes the point that a particular tool can be used in both cross-grain and spindle work.

 

Computer Tips for Woodturners
By: Mike Peace Woodturning
April 26, 2016 · 1,286 views

I explain some computer tricks for finding, resizing and using jpeg images for your woodturning. A woodturner can use these techniques to apply images like leaves, butterflies, or what have you to the surface of a turning for tracing over or woodburning. Filmed and uploaded in HD Check out my blog MikePeaceWoodturning.blogspot.com for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers YouTube channel.

 

Cross Over Tools, the Gouges: woodturning with Sam Angelo
By: WYOMINGWOODTURNER
April 24, 2016 · 6,818 views

In this series, Sam discusses how 'side grain' and 'end grain' are approached with a spindle gouge or a bowl gouge. In this video he makes the point that a particular tool can be used in both cross-grain and spindle work.

 

Catching the Catch
By: woodturningwithtim1
April 14, 2016 · 14,452 views

'Catching the Catch' New DVD coming Fall 2016 Exhilarate Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0

 

Simple Coveturning
By: FMH Woodturning
April 06, 2016 · 136 views

In this video I have shown you how to turn simple coves using only a spindle gouge.

 

Parrallel and taper turning
By: FMH Woodturning
April 06, 2016 · 2,060 views

In this short video I will demonstrate how to parallel and taper turn using both the skew chisel and roughing gouge.

 

Turning from square down to round
By: FMH Woodturning
April 04, 2016 · 3,421 views

In this video I will demonstrate how to tuen from a square piece of timber down to a round section in the middle common for different types of spindles.

 

Bead Turning on the Lathe
By: FMH Woodturning
April 04, 2016 · 370 views

Shown in this video is a simple demonstration of how to turn a few regular and irregular shaped beads on the wood Lathe.

 

Parting off on the lathe
By: FMH Woodturning
April 04, 2016 · 350 views

Here is a basic video of how to part off and the middle and the end of a piece of timber.

 

Beginning WoodTurning: Turning a Square Blank into a Cylinder
By: Barry's Woodturning
February 21, 2016 · 2,853 views

In this video, I show how to turn a Square spindle blank into a Cylinder. I focus on the need to cut 'downhill' and to incorporate bevel supported cuts using the 'ABC' method. I'd love to read your questions in the comments section, and if you have any suggestions for future videos, please let me know.

 

Teaching my Daughter how to use my lathe
By: Peter Mitchell
February 18, 2016 · 172 views

Teaching my Daughter Dawn how to use my lathe considering I have barely learnt myself lol. She did great job for her fist time using a lathe a bit more practise and she will get there. Well with a bit of CA glue and sandpaper she got something that looked like a wand.Thank you for watching please subscribe like and share. Thank you to all my Subscribers for sticking with me and all the potential new ones I may get

 

A Unifying Theory of Spindle Design - a box making exersise
By: wortheffort
February 02, 2016 · 12,552 views

Learning to be 'artistic' in your spindle turning, especially if you're a newbie, can be frustrating. In this episode we experiment with a theory to see if we can crack the secret to quality spindle designs. The exercise to prove the theory involves making lots of end grain ring boxes so included are tips and techniques for turning boxes.

 

Mounting wood on the Lathe
By: Dave's Woodshop
January 21, 2016 · 3,286 views

A demonstration on how to mount a wood blank on a lathe.

 

Basic Wood Lathe Setup
By: Dave's Woodshop
January 14, 2016 · 7,701 views

This video will explain and demonstrate the proper way to setup a wood lathe. Subjects covered include alignment, adjustment, and surface preparation.

 

Lathe - Rounding Square Blank
By: Perryton High School Woodshop
December 07, 2015 · 216 views

 

Lathe - Gouge Practice
By: Perryton High School Woodshop
December 07, 2015 · 23 views

 

Intarsia and Segmentation (beginnerâ s perspective)
By: Gwinnett Woodworkers
November 03, 2015 · 18,443 views

Stuart Miller and Marcus Bailey are both recent students of GWA’s George North. In this classroom video they show off for their teacher as they present their gallery. Recorded and presented in HD mm-dd-yyyy Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Should You Belong to the AAW?
By: Mike Peace Woodturning
August 29, 2015 · 1,514 views

I believe every turner in the US (and some outside the US) should belong to the American Association of Woodturners (AAW). In this video I explain why. Gain access to a preview issue of the on-line digital magazine for beginners, Wooturning FUNdamentals available here: http://www.woodturner.org/?page FUNdamentals Want to find a woodturning chapter near you? Find one here: http://www.woodturner.org/search/custom.asp?id 1509 Learn more about the benefits of membership and how to join here: http://www.woodturner.org/?page MemberBenefits Check out my blog for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers channel. MikePeaceWoodturning.blogspot.com

 

Door stoppers - Round _ a beginners' project
By: Hendrik van Taak
August 07, 2015 · 184 views

Beskrywing

 

Turning a tea light bowl ideal for beginners like me
By: Gary Harris
July 13, 2015 · 142 views

This is a tea light bowl , i am a beginner and this is the sort of stuff i turn Hope you enjoy please like and subscribe

 

Teaching a Young Turner Part 2
By: WYOMINGWOODTURNER
July 11, 2015 · 2,628 views

Grandpa Sam continues his lessons for a new woodturner. He helps Grace build on skills learned and covered in Part 1.

 

Teaching A young Woodturner with Sam angelo
By: WYOMINGWOODTURNER
July 10, 2015 · 5,602 views

Sam gives his granddaughter her first woodturning lesson. In this video he covers a few important points for turning safely on the wood lathe.

 

Between a Scrape and a Cut: the No Man's Land of Woodturning
By: WYOMINGWOODTURNER
July 07, 2015 · 4,963 views

Sam explores that tool position between a proper 'cut' and a 'scrape.' He calls it 'no man's land.' Watch the video and see what he means.

 

A Perfect Level Surface for Your Turning Project: FUNdamentals #8
By: WYOMINGWOODTURNER
June 07, 2015 · 6,047 views

Sam shows a simple way to turn a level, flat surface for any turning project. This video is the latest addition to his Fundamentals of Woodturning series. Playlist: https://www.youtube.com/playlist?list PLL5-IWEcq6B_la3KQlXqp9EBQ2ZJpIzxG

 

Woodturning Practice Pays
By: BMac Woodturning
June 04, 2015 · 785 views

I needed to put some time into practice but made another discovery.

 

JND Woodturning: How To Make A Fountain Pen May 2015
By: Jesse DiMura
May 26, 2015 · 545 views

Turning a fountain pen

 

Woodturning Tools & Techniques with Ernie Conover
By: Conover Workshops
May 20, 2015 · 623 views

This video is about a Conover Workshops woodturning course: Woodturning Tools & Techniques.

 

Hand woodturning 51 beads in 4 mins makes a boring video
By: woodturner21
May 11, 2015 · 3,019 views

This video shows me turning a row of beads in ash and shows that woodturning can be boring it reminds me of practicing beads as an apprentice.

 

Woodturning Pens 101
By: Peter Matthew
April 24, 2015 · 8,115 views

A detailed tutorial on pen turning! Buy this pen: http://www.ebay.com/itm/251942919607?ssPageName STRK:MESELX:IT&_trksid p3984.m1555.l2649 Visit my eBay: http://www.ebay.com/usr/dste6080

 

Woodturning why rookies shouldnt make videos
By: Atle Grønsund
April 22, 2015 · 367 views

Watching rookies turn is boring

 

Woodturning AT 54a #1 An introduction
By: Keith Barrow
April 15, 2015 · 3,002 views

Description

 

Wood Turning 101: Pen Turning: Returning The Pens into a Perfect Pen
By: Turning Round
April 08, 2015 · 1,051 views

Lets see how to take the pen apart and put it back on the lathe and turn it again. This will also help you if you ever need to take a pen apart and replace parts. I show a bit more turning the pen with the large Skew Chisel..

 

Woodturning: Getting Started on the lathe with Carmen De La Paz
By: carmendelapaz
March 30, 2015 · 4,277 views

Carmen De La Paz shares the step-by-step process of mounting a piece of wood on a lathe to safely get you started. Featuring the NOVA Comet II Midi Lathe.

 

Cutting Curves
By: Brian Havens
March 29, 2015 · 6,545 views

See how the key difference between cutting striaght likes and cutting curves can be thought of in terms of cutting angle. Prerequisites: 'Facework: Cutting End Grain' 'Facework: Cutting Side Grain' 'Spindle Work: Cutting Side Grain and End Grain' Cover Tool: 1/2' Ashley Iles shallow gouge Wood: Honduran Mahogany

 

Advice to New Woodturners
By: Mike Peace Woodturning
March 15, 2015 · 6,696 views

Mike explains 3 critical principles essential for woodturning success. These are not new to experienced woodturners but tend to be too frequently overlooked or misunderstood by novice turners. Check out my blog for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers channel. MikePeaceWoodturning.blogspot.com

 

Wood Turning 101: Pen Turning: Turning The Pens Blanks into a Pen
By: Turning Round
March 14, 2015 · 1,366 views

Lets finally make a pen out of all the parts we have been preparing in this series. I show detailed putting the tool to the acrylic and then the pen assembly.

 

FUNdamentals of Woodturning: Basic Woodturning Tools #3 part 2
By: WYOMINGWOODTURNER
March 14, 2015 · 6,528 views

MY LIST.... of starter tools for woodturning. Every new turner must decide which tools to buy. A good video for those new to woodturning.

 

Wood Turning 101: Pen Turning: Cutting Tools, Harbor Freight Wood Turning Tools Review
By: Turning Round
March 11, 2015 · 4,649 views

Wood Turning 101 introduction to Wood Turning Tools. In this step of the series I get out my Harbor Freight Wood Turning tools and give you a run down of each tool and it use. These are the Windsor Design middle level set of wood turning gouges and chisels and various other tools like parting tools and scrapers, and a Skew or two. I show a brief and simple example of using the tools on the lathe. Each tool has a different shape and style. Each tool can produce a great cut in the right situation. Using turning tools is one of the first steps that all turning seem to struggle with. So getting a good start and a lot of practice will make wood turning fun.

 

Woodturning - The beginning! - Part 2
By: Ian Maude
March 11, 2015 · 553 views

The second par of my initial project, showing the finished box and stills of my previous banjo build. Please excuse the bum notes in the playing, I am still getting used to playing a fretless :) Chris Fisher's channel is.. https://www.youtube.com/channel/UCkkxNOUNP8kNT7Gvpc1MjJg Thanks for watching.

 

Woodturning the rookie is learning
By: Atle Grønsund
March 11, 2015 · 149 views

Woodturning is progresing,i now have about 15 hour of turning and im beginning to understand the basics.still im learning this alone,the only info i get on woodturning is from youtube

 

FUNdamentals of woodturning: #4-- Specialty Tools
By: WYOMINGWOODTURNER
March 04, 2015 · 12,907 views

In this short video Sam shows some of his woodturning tools that don't fit into a particular category. These tools are considered specialty tools. Please leave your comments and share Sam's videos.

 

Woodturning - The beginning!
By: Ian Maude
March 04, 2015 · 1,055 views

My first woodturning video. Sorry there is not any actual turning going on as I don't have a stand for the phone yet. This video is basically just showing the start of my journey into woodturning. Mike Waldt's channel is below.. https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w

 

Step 10 Pen Assembly
By: Quarter Inch Off
March 02, 2015 · 280 views

In this video I review assembling the pen. The final step in the slim line pen series of videos. Here we will review using a pen press to put the pen together. --------- If you found this video informative, instructional, entertaining or just plain cool, then please click LIKE. Also if you have not yet, please subscribe to my channel by hitting the subscribe button. -------- Disclaimer: Wood working is dangerous, know your equipment and operate it safely. These videos are meant to share my methods, failed attempts to inspire others to try their own thing. To help others gain confidence, learn from my mistakes and form their own techniques.

 

FUNdamentals of woodturning: #3 Tool Identification
By: WYOMINGWOODTURNER
February 26, 2015 · 21,905 views

In the 3d video of this series, Sam looks at woodturning tool categories.

 

Step 6 Pen Design
By: Quarter Inch Off
February 24, 2015 · 104 views

In this video I discuss designing your pens. What type of materials, hardware, finish and profile to use in your pen turning. --------- If you found this video informative, instructional, entertaining or just plain cool, then please click LIKE. Also if you have not yet, please subscribe to my channel by hitting the subscribe button. -------- Disclaimer: Wood working is dangerous, know your equipment and operate it safely. These videos are meant to share my methods, failed attempts to inspire others to try their own thing. To help others gain confidence, learn from my mistakes and form their own techniques.

 

FUNdamentals of Woodturning #2 Drilling on the Lathe
By: WYOMINGWOODTURNER
February 23, 2015 · 29,073 views

Sam demonstrates a few ways to drill using the wood lathe. You can find this and other 'FUNdamentals of Woodturning' videos-playlist: https://www.youtube.com/playlist?list PLL5-IWEcq6B_la3KQlXqp9EBQ2ZJpIzxG

 

Step 5 Trim Pen Blanks
By: Quarter Inch Off
February 23, 2015 · 595 views

In this video I show how to use a barrel trimmer / pen reamer and drill press to drill my pen blanks. --------- If you found this video informative, instructional, entertaining or just plain cool, then please click LIKE. Also if you have not yet, please subscribe to my channel by hitting the subscribe button. -------- Disclaimer: Wood working is dangerous, know your equipment and operate it safely. These videos are meant to share my methods, failed attempts to inspire others to try their own thing. To help others gain confidence, learn from my mistakes and form their own techniques.

 

Step 2 Cutting the pen blank
By: Quarter Inch Off
February 19, 2015 · 436 views

Here I will show how I cut my pen blanks. This video shows a new method for squaring the ends first, cutting the center band and finally cutting the top blank for the slim line pens. This was the first time I used my table saw sled to cut my blanks. I want to improve on this method by creating a hold down to hold the pen blank versus the awkward clamping I did. --------- If you found this video informative, instructional, entertaining or just plain cool, then please click LIKE. Also if you have not yet, please subscribe to my channel by hitting the subscribe button. -------- Disclaimer: Wood working is dangerous, know your equipment and operate it safely. These videos are meant to share my methods, failed attempts to inspire others to try their own thing. To help others gain confidence, learn from my mistakes and form their own techniques.

 

Step 1 Marking the pen blanks
By: Quarter Inch Off
February 19, 2015 · 241 views

Here I show how I mark up the pen blanks to prepare for cutting. --------- If you found this video informative, instructional, entertaining or just plain cool, then please click LIKE. Also if you have not yet, please subscribe to my channel by hitting the subscribe button. -------- Disclaimer: Wood working is dangerous, know your equipment and operate it safely. These videos are meant to share my methods, failed attempts to inspire others to try their own thing. To help others gain confidence, learn from my mistakes and form their own techniques.

 

Wood Turning 101: Pen Turning: Cleaning out the glue and trimming tubes
By: Turning Round
February 18, 2015 · 1,412 views

In this step of the series I am making the final preparations for the pen blanks. Once I trim the glue and trim the wood and acrylic down to the brass tubes, the blanks are ready for the lathe.

 

Wood Turning 101: Pen Turning: Gluing the tubes into the pen blanks.
By: Turning Round
February 17, 2015 · 3,428 views

In this video I continue with making a pen. I glue the 7 mm tubes into the pen blanks. This is the process of preparing the pens for turning. We are making a pen and pencil set in Cocobolo and in acrylic.

 

Facework: Cutting Side Grain
By: Brian Havens
February 16, 2015 · 9,129 views

See how the cuts used for side grain in spindle turning can be adapted to cleanly cut side grain in face work. Also see how side grain in face work almost always responds well to scraping. Prerequisites: 'Facework: Cutting End Grain' Cover tool: 1/2' Ashley Iles shallow (spindle) gouge

 

Wood Turning 101: Pen Turning: Pen Blank Drilling.
By: Turning Round
February 06, 2015 · 4,624 views

In this video I continue making the set of pens both Cocobolo and acrylic pen blanks. I am drilling out the pen blanks for a 7 mm tube. I drill these both on the drill press and on the lathe.

 

Wood Turning 101: Pen Turning: Cutting and Preparing a Pen Blank
By: Turning Round
February 05, 2015 · 685 views

Wood Turning 101 Pen Turning Cutting and Preparing a Pen Blank. In this video I talk about cutting and getting a pen blank ready to be drilled, before gluing in the brass tubes.

 

Tool Recommendations for the Beginner
By: Brian Havens
January 28, 2015 · 54,315 views

For beginning woodturners, selecting your first set of tools can be overwhelming. Check out what four tools that I think will best serve someone just starting out in woodturning—and why. The first three are predictable, but my fourth pick and one omission might surprise you. Opening Tool: Ashley Iles 1/2' long and strong spindle gouge

 

Facework: Cutting End Grain
By: Brian Havens
January 28, 2015 · 64,148 views

Learn how to safely and cleanly cut 'accross' end-grain while doing facework. Opening tool: Hamet 3/8' bowl gouge with 40/40 grind

 

Wood Turning - Beginners Guide #11 - Pen Turning Tips
By: Mike Waldt
January 23, 2015 · 63,446 views

A few tips on overcoming some common problems when turning pens. RJB Woodturning link on making the CA resistant bushings: https://www.youtube.com/watch?v KSXlS89qmCM

 

Wood Turning 101: Finding Wood for Pen Blanks
By: Turning Round
January 23, 2015 · 6,120 views

In this video I discuss the different types of wood and the basics of pen blanks. Wood can be found from many sources and the basic pen blanks doesn't require a lot of wood.

 

Woodturning Virgins
By: WYOMINGWOODTURNER
January 10, 2015 · 3,899 views

Sam passes on a word of encouragement to turners just starting out. 'It is not easy but with practice, you can make it happen.' Please share with anyone you know who is a new turner.

 

Woodturning .the first time i ever touch and run a woodlathe
By: Atle Grønsund
January 08, 2015 · 1,265 views

Woodturning first time

 

Wood Turning - Beginners Guide #10 - Pen Turning (Part 2)
By: Mike Waldt
January 02, 2015 · 39,361 views

Part 2 of my Beginners Guide to Turning a Pen. Tony's Channel - https://www.youtube.com/channel/UCTO-DDXt5_r-PLrljWQ_6SQ Bob's Channel - https://www.youtube.com/channel/UCmmCqkA0iEdwVsaS7kVwGLw

 

Wood Turning - Beginners Guide #10 - Pen Turning (Part 1)
By: Mike Waldt
January 02, 2015 · 40,116 views

A basic tutorial on pen turning, for beginners, by a beginner. I have split this into two parts as I'm afraid it's rather long :) Tony's Channel - https://www.youtube.com/channel/UCTO-DDXt5_r-PLrljWQ_6SQ Bob's Channel - https://www.youtube.com/channel/UCmmCqkA0iEdwVsaS7kVwGLw

 

A Beginners Woodturning Adventure Part 2
By: James Wegner
December 09, 2014 · 26,915 views

These are my first steps to hopefully becoming a good wood turner.

 

A Beginners Woodturning Adventure Part 1
By: James Wegner
December 06, 2014 · 85,211 views

These are my first steps to hopefully becoming a good wood turner.

 

Video making from Camera- SD card- to Computer (part IV)
By: WYOMINGWOODTURNER
November 26, 2014 · 900 views

Taking a test video through the process: recording on an SD card---transferring to a computer--some editing.

 

#15 Dark Birch Bowl & Carbide Tools for Beginners - Wood Turning - Acolyte Turner
By: Tom Stratton
November 26, 2014 · 14,770 views

In this video I review a set of carbide turning tools from Glen Teagle at http://www.ukwoodcraftandcarbidechisels.co.uk/ whilst turning a bowl from a piece of Dark Birch. Mike Waldt's video can be seen here: www.youtube.com/watch?v PD5lf7S_YFY Further projects, turnings and information can be found at http://tomturns.com CHANNEL TAGS Acolyte Turner, Wood Turning, Turning, Project, Ossett, West Yorkshire, UK, Nova, Record Power, DVR XP, BS350, Lathe, Bandsaw, Sanding, Sandpaper, Ruth Niles, Off Centre Jig, Off Center Jig, help, tips, training, learning, how to, Hollow Form Elm Pot Pourri Pot Pourri Holder Carbide Carbide Tools Carbide Turning Tools RS200KT Glen Teagle

 

What Speed?
By: Brendan Stemp
November 14, 2014 · 5,466 views

I look at the question: at what speed should I turn?

 

2014-10-02 Making Cash from your hobby
By: Gwinnett Woodworkers
November 11, 2014 · 46,583 views

Ron Brown explains how you can market items made in your shop. Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

What is Woodturning on a Lathe with Carmen De La Paz
By: carmendelapaz
October 27, 2014 · 2,703 views

Carmen De La Paz explains what is woodturning and gives you a close up look at the NOVA Comet II Midi Lathe.

 

Wood Turning - Beginners Guide # 9 - The Skew Chisel
By: Mike Waldt
July 10, 2014 · 313,997 views

I go through the basics of the Skew Chisel. SJ Woodworks link: https://www.youtube.com/channel/UC9-CY0wrDiyCJIKu8Vrgu6Q

 

2014-03-15 Turning 101 by Dan Douthart
By: Gwinnett Woodworkers
July 08, 2014 · 1,444 views

Dan Douthart explains the basics of getting started in wood turning. Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Wood Turning - Beginners Guide # 8 - The Negative Rake Scraper
By: Mike Waldt
June 29, 2014 · 56,260 views

I show how to grind and use Negative Rake Scrapers WyomingWoodTurner : https://www.youtube.com/user/WYOMINGWOODTURNER A link to Stuart Batty's thoughts on the subject of Negative Rake Scraping http://woodturning.org/files/2013/01/NRS-Instruction-Manual-Email-Version.pdf

 

Wood Turning - Beginners Guide # 7 - The Scraper
By: Mike Waldt
June 23, 2014 · 36,890 views

I go over a few of the basic uses of a scraper, and how to present the tool to the work, when your starting out. Laurent Cartot's Channel : https://www.youtube.com/channel/UCVulp2F4kWioRrCyHhrqllw

 

Wood Turning - Beginners Guide # 6 - The Spindle Roughing Gouge
By: Mike Waldt
June 15, 2014 · 32,869 views

The basic anatomy and use of the Spindle Roughing Gouge (SRG). The link to - AsWoodTurns - https://www.youtube.com/channel/UCucYlCYbbf1ZDGO-7OjKl5w

 

Pen Turning Made Easy Pt2
By: Woodcraft of Spokane
June 09, 2014 · 5,325 views

This is part 2 of 2, where Joel walks us through the steps in turning and finishing a pen. Sit back and relax while you observe how easy it is to turn a pen. Remember, pens are great for holiday gifts or special occasions. Add a laser engraved name to customize and you have the Ahh Gift.

 

Pen Turning Made Easy
By: Woodcraft of Spokane
June 09, 2014 · 12,066 views

This is part 1 of 2, where Joel walks us through the steps in turning and finishing a pen. Sit back and relax while you observe how easy it is to turn a pen. Remember, pens are great for holiday gifts or special occasions. Add a laser engraved name to customize and you have the Ah Ha Gift.

 

Wood Turning - Beginners Guide # 5 - The Bowl Gouge
By: Mike Waldt
June 02, 2014 · 127,549 views

I go through the basic use of the Bowl Gouge. My recommended channel links are : Brendan Stemp - https://www.youtube.com/channel/UCYJ4e0XACGJQjJvfmVUcE-Q Bob Hamilton - https://www.youtube.com/channel/UCxTP98gxuZUIVxdQ3UctGVw

 

2014-05-24 Turning Tools Tutorial by Dan Douthart
By: Gwinnett Woodworkers
May 26, 2014 · 1,897 views

Dan Douthart explains the names and uses of the common woodturning tools. Dan quickly shows the differences between a number common woodturning tools and why you would use one over another. Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Wood Turning - Beginners Guide #4 - The Spindle Gouge
By: Mike Waldt
May 20, 2014 · 79,628 views

I go through the basic use of the spindle gouge, how to present it to the work, and how to avoid those annoying catches. Here are the recommended channel links : Pete TGIF https://www.youtube.com/user/PeteTGIF Robbiethewoodturner https://www.youtube.com/user/Robbiethewoodturner Kevin Krull https://www.youtube.com/channel/UC1d-iNgRP7xKYgOLDE4-fMw

 

The Cutting Edge in Woodturning
By: WYOMINGWOODTURNER
April 21, 2014 · 3,038 views

Sam explores the cutting edge on turning tools with a demonstration that features, 'a hunting knife?'

 

Marking blank
By: MTW Turining
April 10, 2014 · 8 views

 

Mounting a blank
By: MTW Turining
April 06, 2014 · 4 views

 

Cylinder with SideGround gouge Push & Pull cuts
By: Al Hockenbery
April 05, 2014 · 429 views

A clip from a multi-center napkin ring demonstration at Tri-County Woodturners, Video by Jan Brown. Shows using the bowl gouge bevel riding push cut and the pull cut (slicing cut) to turned a cylinder and how those cuts relate to bowl turning

 

Body Position
By: MTW Turining
March 29, 2014 · 7 views

 

Spindle Cove
By: MTW Turining
March 29, 2014 · 39 views

 

Spindle Bead
By: MTW Turining
March 29, 2014 · 24 views

 

Parting Tool
By: MTW Turining
March 29, 2014 · 10 views

 

Roughing Out
By: MTW Turining
March 29, 2014 · 12 views

 

Skew
By: MTW Turining
March 29, 2014 · 16 views

 

Mounting a blank
By: MTW Turining
March 09, 2014 · 14 views

 

Body Position
By: MTW Turining
March 08, 2014 · 3 views

 

Attitude of the Tool
By: MTW Turining
March 08, 2014 · 17 views

 

Grain&Cutting Direction
By: MTW Turining
March 08, 2014 · 13 views

 

Wood Turning - Beginners Guide #3 - A Bowl
By: Mike Waldt
March 05, 2014 · 169,423 views

The third in the Beginners Guide series shows one of the methods of turning a simple bowl. This lovely piece of Walnut was sent to me by Tom Wilcox of Kentucky. Thanks Tom.

 

Woodturning Q&A How to properly hold turning tools
By: The Woodshop
February 27, 2014 · 9,770 views

In this video I demonstrate how to properly hold the tools. Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

Wood Turning - Beginners Guide #2 - A Lidded Box
By: Mike Waldt
February 12, 2014 · 939,664 views

In the second of the Beginners Guide series I show you one of the methods I use to turn a simple lidded box from Sapele, sent to me by Tom Scandian, thanks Tom.

 

Dwaine Crigger - Design and Planning for Turning
By: Woodturners of Southwest Missouri
January 29, 2014 · 1,065 views

Dwaine Crigger is Emeritus Professor - Missouri State University. He spoke to the Woodturners of SW MO about design and planning a project. A woodworker himself, he introduced concepts that any artist should employ. For more information about us: www.woodturnersofswmo.org

 

Raw Wood Prepped for Turning
By: Paul Crabtree
January 25, 2014 · 344 views

How wood directly from a tree is cut to mount on a lathe for turning. http://toolsbycrabtree.com

 

DAW Demonstration by Ray Frase, basics of turning a bowl
By: Roger Meeker
January 20, 2014 · 618 views

Ray Frase demonstrates the basics of how to turn your first bowl. Ray uses what he calls, '45-45-45',for the members of the Detroit Area Woodturners.

 

Wood Turning - Beginners Goblet Guide Addendum
By: Mike Waldt
January 06, 2014 · 20,355 views

This video contains the edited out 'important' bits of my previous upload. I will endevour to get it right on my next 'Beginners Guide' installment :) Thanks to all who gave me good advice.

 

Wood Turning - Beginners Guide #1 - A Goblet
By: Mike Waldt
January 04, 2014 · 570,438 views

A tutorial for beginners on turning a simple Goblet

 

Lathe Practice
By: Perryton High School Woodshop
January 01, 2014 · 107 views

description

 

Tenon Wrench
By: woodturningwithtim1
December 29, 2013 · 6,342 views

This is an old trick for making perfectly sized tenons for all of your projects.

 

Conosciamo la sgorbia da scavo - Cap.6
By: Livio Maritati
December 22, 2013 · 59,787 views

Parte sesta della mini guida per principianti che si vogliono cimentare nella piacevole arte della tornitura, dedicata alla sgorbia da scavo (bowl gouge o deep fluted gouge)

 

Conosciamo il raschio - Cap.5
By: Livio Maritati
December 19, 2013 · 16,546 views

Siamo giunti al quinto capitolo della mini guida per principianti. Questa volta ci occupiamo del raschio (scraper).

 

Conosciamo la sgorbia a profilare - Cap.4
By: Livio Maritati
December 13, 2013 · 32,382 views

Proseguiamo con la quarta puntata della miniguida per principianti dedicata alla spindle gouge.

 

Conosciamo il troncatore - Cap.3
By: Livio Maritati
December 10, 2013 · 28,894 views

Terzo capitolo della mini guida per principianti per familiarizzare con il troncatore.

 

Conosciamo la sgorbia da sgrosso - Cap.1
By: Livio Maritati
November 25, 2013 · 59,845 views

Nel primo capitolo della nostra mini guida cerchiamo di facilitare il primo impatto del principiante con la sgorbia per sgrossare

 

What you need to make a pen, Beginning Pen Making Series
By: Chad Schimmel
November 23, 2013 · 5,425 views

This video shows what you will need to make pens. If you are new to pen making please view the other videos in this series. https://www.youtube.com/playlist?list PL153D80D85DA86943 IF you like the video give it a thumbs up and don't forget to subscribe to the channel. If you are looking for great custom pen blanks and pen kits and parts please check out my ebay store at http://www.ebay.com/sch/schimmelsdust/m.html?item 201012656910&rt nc&_trksid p2047675.l2562

 

How to Turn a Spindle on a Lathe Part 1: Cylinder
By: Michael Roper
November 07, 2013 · 2,967 views

An introductory woodturning tutorial on how to turn a spindle blank on a lathe and end up with a smooth cylinder. This is the first part of a series on spindle turning by Michael Roper, third generation carpenter and woodturning profesisonal. Roper currently teaches woodturning at the Fine Woodworking department at Red Rocks Community College.

 

Beginning Pen Making, Make a Cigar Pen. Stars and Stripes America Style.
By: Chad Schimmel
October 25, 2013 · 26,833 views

In this episode of the Beginning Pen Making series I will show you how to build a cigar pen using stars and stripes blanks. Complete Micro Mesh Wet sand Video, http://youtu.be/-1RmJg9cJ4w If you are looking for great custom pen blanks and pen kits and parts please check out my ebay store at http://www.ebay.com/sch/schimmelsdust/m.html?item 201012656910&rt nc&_trksid p2047675.l2562 Please post any questions or comments below and Don't forget to subscribe to the channel for new videos every Friday. Thanks for watching. For other Inquires please contact me at smokeyartworks@gmail.com

 

Micro Mesh finishing a Pen, Beginning pen making Series.
By: Chad Schimmel
October 22, 2013 · 12,231 views

In this video I show how I use Micro Mesh to sand and finish a pen. If you are looking for great custom pen blanks and pen kits and parts please check out my ebay store at http://www.ebay.com/sch/schimmelsdust/m.html?item 201012656910&rt nc&_trksid p2047675.l2562 Be sure and subscribe to the channel and post any comments or questions below. For other inquiries please email smokeyartworks@gmail.com

 

FUNdamentals of Woodturning The Lathe
By: Walter Wager
August 30, 2013 · 79,964 views

This video describes three things you should consider when buying a wood lathe: capacity, convenience, and engineering.

 

Woodturning Q&A Beading tool
By: The Woodshop
July 29, 2013 · 13,143 views

How to use a beading tool. Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

Drilling a Guitar Fret Board on Lathe
By: Brendan Stemp
July 27, 2013 · 2,165 views

I show how to use a lathe to safely drill a deep hole into the end of a long thin board.

 

New Woodturners
By: Carl Jacobson
July 14, 2013 · 11,198 views

Brendan Stemp - ThisWoodwork - GuyBradbury - Robbiethewoodturner - baconsoda - Mike Waldt - Steve Ramsey - WYOMINGWOODTURNER - woodturningwithtim1 - Allen Tyler - jake gevorgian - Miguel Sanchez - Bob Hamilton - Cindy Drozda - David Marks - 77dbm - Aaron Hammer -

 

Syringes and Highlights from England
By: Brendan Stemp
July 04, 2013 · 4,433 views

A look at a few useful woodturning things that I picked up in England on a recent visit. I also explain how to save your Danish Oils from solidifying in the can.

 

Paper Vs. Cloth
By: woodturningwithtim1
June 14, 2013 · 3,632 views

Cloth bad...Paper good! Never use a cloth to apply finish to a spinning piece on the lathe. The fabric can get caught and possibly pull you into the spinning lathe. Paper Towels are very easy to tear so they are much safer to use when applying finish to a spinning piece.

 

Heads or Tails?
By: woodturningwithtim1
June 02, 2013 · 4,314 views

For the beginning turner understanding the mechanics of the lathe's head and tail can be perplexing.

 

Wood Turning Demystified - Basic Educational Demonstration to Get You Turning
By: wortheffort
April 11, 2013 · 247,223 views

This is a basic overview of woodturning and it's tool as it relates to other aspects in woodworking. In it I turn a project, start to finish (including finishing) in real time utilizing the roughing gouge, skew chisel, spindle gouge and bowl gouge while explaing how to use them and why they work. Knowledge from K-12 school, experience and common sense is referenced.

 

Simple Wood Turning Tools Demonstrated.avi
By: Kerry Harrison
February 19, 2013 · 129,971 views

Simple Wood Turning Tools Demonstrated.avi

 

Holiday Turnings by Tim Yoder (woodturning DVD preview)
By: Craft Supplies USA
February 13, 2013 · 28,012 views

Learn how to turn three fun and unique holiday gifts with Holiday Turnings DVD by Tim Yoder. Buy now: https://www.woodturnerscatalog.com/p/99/5766/Tim-Yoder-Holiday-Turnings-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Tim guides you through turning your very own snowman, and christmas tree ornament, and a classic bell. With Tim's help you can turn a custom holiday gift for everyone on your list. DVD, NTSC Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodt

 

Get Turning! 4 Beginner's Projects by Tim Yoder (woodturning DVD preview)
By: Craft Supplies USA
February 13, 2013 · 38,959 views

Learn how to turn four fun and and functional beginner projects with Get Turning! DVD by Tim Yoder. Buy now: https://www.woodturnerscatalog.com/p/99/5764/Tim-Yoder-Get-Turning-4-Beginners-Projects-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Tim demonstrates how to turn a rolling pin, bowl, scoop, and a spinning top while teaching basic cuts and proper tool use. Learn how to use a range of basic woodturning tools including the spindle gouge, bowl gouge, spindle roughing gouge, scraper, and

 

Woodturning: The Definitive Beginners's Guide by Tim Yoder (woodturning DVD preview)
By: Craft Supplies USA
February 13, 2013 · 27,416 views

New to woodturning and need to set up shop? This DVD will show you how. Buy now: https://www.woodturnerscatalog.com/p/99/5765/Tim-Yoder-Woodturning-The-Definitive-Beginners-Guide-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Let Tim guide you through your shop set up in Woodturning: The Definitive Beginner's Guide by Tim Yoder. Tim will help you plan, organize, and prepare your shop so you're sure to have the right equipment and tools to begin turning successfully. Learn where and how to s

 

Wood Turning: A Craftman's Guide by Mark Baker (woodturning DVD preview)
By: Craft Supplies USA
February 13, 2013 · 8,049 views

Begin your journey into the craft of woodturning with this excellent beginners Book/DVD combo. Buy now: https://www.woodturnerscatalog.com/p/98/5707/GMC-Publications-Wood-Turning-A-Craftsmans-Guide?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Written for the beginning woodturner, Woodturning: A Craftsman's Guide by Mark Baker provides instruction on every topic you need to start woodturning. Mark guides you through the basics of woodturning including lathe use and anatomy, how to select wood

 

Woodturning Q&A Basic Turning Tools
By: The Woodshop
February 12, 2013 · 51,692 views

In this video I show you the basic tools you need to start turning. Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

Woodturning Buyer's Guide Part Two
By: Record Power
February 11, 2013 · 19,293 views

Alan Holtham gives a comprehensive introduction to lathes and woodturning accessories, providing a good grounding in all essential aspects of woodturning.

 

Woodturning Buyer's Guide Part One
By: Record Power
February 11, 2013 · 17,289 views

Alan Holtham gives a comprehensive introduction to lathes and woodturning accessories, providing a good grounding in all essential aspects of woodturning.

 

Beginning Pen Making, Pen parts and Bushings organization.
By: Chad Schimmel
February 05, 2013 · 4,663 views

This video shows how I organize my pen parts, bushings and sand paper. If you are looking for great custom pen blanks and pen kits and parts please check out my ebay store at http://www.ebay.com/sch/schimmelsdust/m.html?item 201012656910&rt nc&_trksid p2047675.l2562 Be sure and subscribe to the channel.

 

Holding Work for Spraying
By: Brendan Stemp
January 19, 2013 · 1,694 views

The 2nd episode in the Spraying Lacquer series. I look at devices I use to hold my woodwork when spraying them with a lacquer.

 

Drilling Deep Holes on the Lathe
By: Brendan Stemp
January 09, 2013 · 57,555 views

Drilling deep into end grain on the lathe can be problematic. Because it is something I do a lot of I thought there would be some worthwhile tips and techniques I could pass on.

 

WOODTURNING--- Invent your own Wheel
By: WYOMINGWOODTURNER
January 09, 2013 · 8,147 views

Sam invites viewers to share ideas on YouTube. Design your own artwork and develop methods and techniques to accomplish your ideas. Sam shows a chucking method for turning an oval shape in a Mortar.

 

Scavare di testa e lungo vena
By: Livio Maritati
January 08, 2013 · 22,913 views

Tecnica dello scavo di testa (End Grain) e lungo vena (whit the Grain)

 

woodturning - tallonature
By: Aquila747a
December 31, 2012 · 161 views

diversi esempi su come tallonare

 

HOW TO GET STARTED IN WOODTURNING
By: WYOMINGWOODTURNER
November 28, 2012 · 43,490 views

Sam Angelo shares his knowledge and experience from his years turning at the wood lathe. Sam shows the components of a small and large lathe and demonstrates some basic turning.

 

Woodturning for learners. Timber and finish Video 3
By: Ian Robbo Robertson
November 15, 2012 · 6,986 views

This series of 4 videos are on safety when using the woodturning lathe and cover personal safety, Work environment safety, timber and finishes safety and lathe safety. I know it is a boring subject but probably one of the most important parts of enjoying your hobby. Remember: If you don't work safely you may not work at all.

 

Lyle on Sharpening Lathe Tools
By: Lyle Jamieson
October 04, 2012 · 81,357 views

Lyle Jamieson shows the use of grinders and gringing jigs to sharpen woodturning tools.

 

Lyle on Bevel-Supported Tool Control
By: Lyle Jamieson
October 03, 2012 · 25,287 views

Lyle Jamieson stresses 'no fear' tool control for thin walled bowl turning. He demonstrates techniques to line up bevel-support for accurate cuts.

 

Lyle on Woodturning Push Cut
By: Lyle Jamieson
October 03, 2012 · 22,034 views

Lyle Jamieson stresses techniques for using a push cut. This tool control technique leaves a clean surface on the inside of the bowl and reduces torn out grain and sanding.

 

Lyle on Woodturning Pull Cut Definition
By: Lyle Jamieson
October 03, 2012 · 15,882 views

Lyle Jamieson uses the pull cut on the outside of the turned bowl. This process will reduce or eliminate torn out grain and reduce sanding.

 

Lyle on a Pull Cut for Woodturning
By: Lyle Jamieson
October 03, 2012 · 4,023 views

Lyle Jamieson uses a planing or pull cut to produce a clean surface on an end grain spindle.

 

Lyle on Mounting Wood Blanks on a Lathe
By: Lyle Jamieson
October 03, 2012 · 221,440 views

Lyle Jamieson stresses safety to securely hold a bowl blank on a lathe. He starts between centers using a balance point.

 

Lyle on Lathe Set Up for Woodturning
By: Lyle Jamieson
October 03, 2012 · 9,269 views

Lyle Jamieson stresses methods to get a lathe set up for safe turning. Get the most out of your turning experience without vibration.

 

Lyle on Grain Supported Cuts for Woodturning
By: Lyle Jamieson
October 01, 2012 · 4,006 views

Lyle Jamieson stresse grain orientation to prevent torn out grain while woodturning a bowl. He uses a pencil trick to illustrate the clean cutting action.

 

Lyle on Tool Control and Creativity for Woodturning.mp4
By: Lyle Jamieson
October 01, 2012 · 2,647 views

Lyle Jamieson stresses tool control and turning techniques. He suggests getting help to shorten the learning curve. He promotes communication of a consistent message for designing woodturned art. 'Go for the Spectacular!'

 

Beginning Pen Making Part 2, Making a Slimline Pen
By: Chad Schimmel
September 05, 2012 · 61,197 views

Beginning Pen Making Part 2, Making a Slimline Pen. In this episode I will take you through the making of a slimline pen step by step. Next episode, Making a Cigar pen with an acrylic blank. If you are looking for great custom pen blanks and pen kits and parts please check out my website at www.turnerswarehouse.com Be sure and subscribe for more in the series as well as a new video each week.

 

Beginning Pen Making Part 1, Pen Styles, Tools, and Getting Started. Basic Pen Turning explained
By: Chad Schimmel
August 29, 2012 · 79,111 views

Beginning Pen Making Part 1, Pen Styles, Tools, and Getting Started. In this part one of Beginning Pen making I will review the types of pens you can make and what you will need to get started. Next Episode, Making a Slimline Pen. New starter sets added to Turners Warehouse. Check under the Tools section! If you are looking for great custom pen blanks and pen kits and parts please check out my supply site at www.turnerswarehouse.com Be sure and subscribe to the channel for future episodes.

 

Scrap Wood Ideas
By: woodturningwithtim1
August 22, 2012 · 17,617 views

If you are like Tim you can't bring yourself to throw away any scrap wood. He explains how kits can help you clear out your stock and make some great projects at the same time.

 

Taming a Catch
By: woodturningwithtim1
August 15, 2012 · 6,993 views

New turners are often afraid of getting a catch. In this clip Tim shows how to use a Steb Drive Center to pull the fangs out of the dreaded catch

 

WOODTURNING on the Lathe: TOOL REVIEW
By: WYOMINGWOODTURNER
July 12, 2012 · 2,790 views

Review of basic woodturning tools. Sam shows the main categories of woodturning tools and the 'grind' on each: bowl gouges, spindle gouges, scrapers, parting tools, and others.

 

Wood turning courses with Eddy Noel - bowl outside
By: Eddy Noel
July 10, 2012 · 2,401 views

Register now for a wood turning course with Eddy Noel: http://eddynoel.com/cours-de-tournage-sur-bois/ INTRODUCTION TO WOODTURNING Eight-hour course (at least 4 hours of practice on a lathe for each participant) The course content is: •Description and origin of the wood lathe •Equipment needed and optional items •Woodturning chisels and gouges sharpening •Protection, safety and wood dust control •Various aspects of turning and different techniques •Dry wood vs. green wood •Sanding and finishing •Revision of important issues This course is intended for people who wish to

 

Glenn Lucas DVD, Mastering Woodturning Tools and techniques
By: Glenn Lucas
July 09, 2012 · 13,179 views

This is a brief preview of the DVD 'Mastering Woodturning Tools and Techniques'

 

bowl inside 120623
By: Eddy Noel
July 09, 2012 · 715 views

 

Get Turning! 4 Beginner's Projects-NEW DVD Now Available!
By: woodturningwithtim1
June 27, 2012 · 4,038 views

Tim Yoder shows you how to turn a rolling pin, bowl, kitchen scoop and everybody's favorite...a top! Great projects for the beginning turner. New DVD now available at www.woodturningwithtim.com

 

Wood Turning For Beginners - Tool Sharpening
By: Mike Waldt
June 26, 2012 · 23,917 views

A video on my thoughts regarding tool sharpening when you start out woodturning. Not a definitive guide, just my personal views and observations.

 

Wood Turning For Beginners - The Tools
By: Mike Waldt
June 26, 2012 · 47,874 views

A video on my thoughts regarding tool selection when you start out woodturning. Not a definitive guide, just my personal views and observations.

 

Wood Turning For Beginners - The Lathe
By: Mike Waldt
June 22, 2012 · 75,829 views

My guide to choosing your first lathe, based on my experiences during the short time that I have been wood turning. I hope it helps you to make the right choice.

 

Woodturning - In the beginning.
By: Mike Waldt
June 21, 2012 · 4,718 views

These are a few of the pieces I have turned since I started this 'hobby' which has become a passion, back in October 2011

 

Wood Turning for beginners
By: Mike Waldt
June 20, 2012 · 9,058 views

This video explains what I intend to post up in the future regarding starting to woodturn. I want to put something back, as I normally only take from the knowledge of others, who take the time and make the effort to pass on their experiences. I thought it might be useful for those people who are thinking about taking up woodturning, but don't know where to start.......yes I know you need a lathe.......lol. The videos will explain, what I bought to start with, and where I looked to research the things I needed. If one person finds an answer to a question...then I'll be happy. Watch this space........!!!!!

 

Woodturning:The Definitive Beginner's Guide-DVD excerpts
By: woodturningwithtim1
May 13, 2012 · 4,619 views

Excerpts from Tim Yoder's new DVD 'Woodturning: The Definitive Beginner's Guide' available now at www.woodturningwithtim.com

 

Nico et RÃ mi essayent le tour a bois. Nico and RÃ mi try the wooden tower.
By: Laurent Cortot
May 07, 2012 · 15,928 views

Mon blog: http://lolotourneur.blogspot.com/ Essais du tour a bois par mes enfant Rémi et Nico

 

Woodturning: The Definitive Beginner's Guide DVD
By: woodturningwithtim1
April 18, 2012 · 5,580 views

New DVD available now at www.woodturningwithtim.com This is the ultimate DVD for beginning woodturners. Tim Yoder shows you everything from how to choose a lathe to finding the right tools and equipment. He will also show you how to sharpen your tools, what type of woods to use and some basic turning exercises to get you started!

 

Woodturning FUNdamentals - Getting Started 2
By: American Association of Woodturners
April 17, 2012 · 2,291 views

Woodturning FUNdamentals provides a source for basic woodturning skills and techniques. Learn more about the American Association of Woodturners at woodturner.org.

 

NOVA 1624-44 Lathe Instruction Video Part 4
By: NOVA Woodworking
April 16, 2012 · 3,899 views

For more information, please following the link below. http://www.teknatool.com/products/Lathes/1624/Nova%20_1624.htm Like us on Facebook: http://www.facebook.com/NOVAwoodworking Follow us on Twitter: http://twitter.com/#!/novawoodworking

 

NOVA 1624-44 Lathe Instruction Video Part 3
By: NOVA Woodworking
April 16, 2012 · 4,823 views

For more information, please following the link below. http://www.teknatool.com/products/Lathes/1624/Nova%20_1624.htm Like us on Facebook: http://www.facebook.com/NOVAwoodworking Follow us on Twitter: http://twitter.com/#!/novawoodworking

 

NOVA 1624-44 Lathe Instruction Video Part 2
By: NOVA Woodworking
April 16, 2012 · 2,538 views

For more information, please following the link below. http://www.teknatool.com/products/Lathes/1624/Nova%20_1624.htm Like us on Facebook: http://www.facebook.com/NOVAwoodworking Follow us on Twitter: http://twitter.com/#!/novawoodworking

 

NOVA 1624-44 Lathe Instruction Video Part 1
By: NOVA Woodworking
April 16, 2012 · 6,724 views

For more information, please following the link below. http://www.teknatool.com/products/Lathes/1624/Nova%20_1624.htm Like us on Facebook: http://www.facebook.com/NOVAwoodworking Follow us on Twitter: http://twitter.com/#!/novawoodworking

 

Figured Wood reading grain in woodturning
By: WYOMINGWOODTURNER
April 14, 2012 · 13,676 views

Sam looks at grain and figure in wood and shows proper ways of milling wood to best display figure and grain

 

Woodturning FUNdamentals - Getting Started 1
By: American Association of Woodturners
March 07, 2012 · 1,988 views

Woodturning FUNdamentals provides a source for basic woodturning skills and techniques. Learn more about the American Association of Woodturners at woodturner.org.

 

Gole e tori
By: Livio Maritati
February 14, 2012 · 3,093 views

Alcuni utili suggerimenti per fare gole e tori al tornio

 

Woodturning FUNdamentals - Welcome
By: American Association of Woodturners
January 16, 2012 · 5,981 views

Woodturning FUNdamentals provides a source for basic woodturning skills and techniques. Learn more about the American Association of Woodturners at woodturner.org.

 

Get Off to a GOOD START
By: Christine Caliendo
December 02, 2011 · 25,341 views

How to set up for success!! Craig walks you through Flat & Level, Tool Use, Tool Selection and Rotating your cutter.

 

Turning a Cove
By: john60lucas
September 05, 2011 · 49,948 views

Learning how to turn a cove with a spindle gouge, scraper and skew.

 

Avoiding Voids
By: woodturningwithtim1
July 17, 2011 · 2,865 views

When turning wood with voids or large cracks, how do you keep the tool from falling into the spaces?

 

What does a bevel do?
By: woodturningwithtim1
July 16, 2011 · 4,395 views

Tim takes to the sandbox to explain what a bevel is and how it effects your turning

 

Mastering Woodturning Tools and Techniques by Glenn Lucas (woodturning DVD preview)
By: Craft Supplies USA
July 14, 2011 · 9,374 views

Watch a short woodturning preview of 'Mastering Woodturning Tools and Techniques' by Glenn Lucas. Buy now: https://www.woodturnerscatalog.com/p/99/4621/Glenn-Lucas-Woodturning-Mastering-Woodturning-Tools-and-Techniques-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA A professional woodturner since 1995, Glenn Lucas is renowned for his efficient tool use and skill at the lathe. Mastering Woodturning Tools and Techniques echoes his successful classes and demonstrations. It will help beginners ide

 

SB Woodturning: Grain 101 with David Marks
By: SBWoodturning
June 07, 2011 · 41,703 views

Stuart Batty, Ashley Harwood, and David Marks speak on wood grain at the David Marks woodturning school in northern California Visit http://woodturning.org/ for more info and full High Definition volumes.

 

Turning a bead on the lathe
By: WoodturningFYP2011
March 19, 2011 · 7,586 views

 

Parting Off
By: WoodturningFYP2011
March 19, 2011 · 3,104 views

Wood Lathe Parting Off Spindle

 

Sanding On The Lathe
By: WoodturningFYP2011
March 19, 2011 · 2,773 views

How to safely sand a spindle on the wood lathe

 

Changing Lathe Speed
By: WoodturningFYP2011
March 13, 2011 · 6,918 views

Educational Video on how to safely change the speed on a belt and pulley wood lathe

 

Mounting A Blank Between Centres on a Lathe
By: WoodturningFYP2011
February 01, 2011 · 453 views

mounting a blank between centre

 

Using a Spur Center
By: ric47scroll
January 15, 2011 · 4,433 views

This is one of the shorter videos on how I use the spur center. There are many more videos on my web site at http://www.scrollsaws.com. I also have a large selections of scrollsaw videos.

 

Chatterwork Methods Course YouTube Preview.flv
By: Ron Brown
March 23, 2010 · 4,159 views

Excellent preview taken from new DVD released March 2010 on Chatter Tool Methods by Ron Brown. The anatomy of a chatter tool is discussed, various cuts are shown (but not all of them of course) and fine examples to spark your imagination. You can contact Ron for more information including where to get the chatter tool featured in the video, it is his own design comes with 4 blades and generally retails for less than 50. Some retailers even include the full length video with the purchase of the chatter tool. For more info: ronbrown@coolhammers.com

 

Woodturning: A Foundation Course with Keith Rowley (woodturning DVD preview)
By: Craft Supplies USA
March 15, 2010 · 8,761 views

A preview of Keith Rowley's woodturning video 'Woodturning, a Foundation Course'. Buy now: https://www.woodturnerscatalog.com/p/78/5161/Fox-Chapel-Woodturning%3A-A-Foundation-Course-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA In this DVD, Keith takes you step by step through 8 signature projects explaining in detail his work methods and tool techniques along the way. A must for every woodturners video library. 88 minutes. Craft Supplies USA (The Woodturners Catalog) carries the largest sele

 

Turning Wood with Richard Raffan (woodturning DVD preview)
By: Craft Supplies USA
March 15, 2010 · 10,845 views

A preview of Richard Raffan's woodturning video 'Turning Wood'. Buy now: https://www.woodturnerscatalog.com/p/78/5162/Fox-Chapel-Turning-Wood-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Covers tool selection, sharpening, gouge and skew exercises, as well as several projects. Highly recommended for beginning turners, or those wanting to advance their skill level. Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodturning tools and supplies in the industry. Turn

 

Turnaround with Jimmy Clewes (woodturning DVD preview)
By: Craft Supplies USA
March 15, 2010 · 8,298 views

A preview of Jimmy Clewe's woodturning video 'Turnaround'. Buy now: https://www.woodturnerscatalog.com/p/78/3804/Avanticom-Turnaround-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA In this DVD, Jimmy takes you step-by-step through spindle work, natural edge and end grain turning, coloring with dyes and turning an oyster-shaped box. Each process is explained in detail from start to finish with high quality videography and multiple camera angles providing you a clear view of what is being done at

 

Turn It Up with Jimmy Clewes (woodturning DVD preview)
By: Craft Supplies USA
March 15, 2010 · 7,864 views

A preview of Jimmy Clewe's woodturning video 'Turn it Up'. Buy now: https://www.woodturnerscatalog.com/p/78/3803/Avanticom-Turn-it-Up-3-DVD-Set?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA If you enjoyed the Turn It On DVD series with world-class woodturner and instructor Jimmy Clewes, you won't want to miss this exceptional follow-up series Turn It Up. In this three disc series, Jimmy takes turning to an all new level by encouraging viewers to think 'outside the box' on design, finishing techniqu

 

Turn It On with Jimmy Clewes (woodturning DVD preview)
By: Craft Supplies USA
March 15, 2010 · 8,819 views

A preview of Jimmy Clewe's woodturning video 'Turn it On'. Buy now: https://www.woodturnerscatalog.com/p/99/3801/Avanticom-Turn-It-On-3-DVD-Set?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Woodturner and world-class instructor Jimmy Clewes takes your woodturning skills to the next level with his new 'Turn It On' DVD series. This three disc set includes stunning close-ups and new 'bevel-cam' shots that show you every detail of the tool action close-up. Clear, concise explanations throughout these v

 

Surface Design on Thin Wall Turning with Binh Pho (woodturning DVD preview)
By: Craft Supplies USA
March 12, 2010 · 7,434 views

A preview of Binh Pho's woodturning video 'Surface Design on Thin Wall Turning'. Buy now: https://www.woodturnerscatalog.com/p/99/3635/Turning-Wood-Productions-Surface-Design-on-Thin-Wall-Turning-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA In this video, Binh Pho demonstrates all the techniques used to create his one-of-a-kind signature pieces. Every process Binh uses to create these extraordinary pieces is explained in detail throughout with chapters focusing on: necessary equipment, selecti

 

Hollow Turning with David Ellsworth (woodturning DVD preview)
By: Craft Supplies USA
March 12, 2010 · 20,830 views

A preview of David Ellsworth's woodturning video ' Hollow Turning'. Buy now: https://www.woodturnerscatalog.com/p/99/3926/Ellsworth-Hollow-Turning-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Ellsworth's classic method of bringing the log to the lathe and turning a hollow form. Includes: Centering: roughing-out; shear-cutting with the 'Ellsworth Grind'; sanding wet wood; finishing; cutting interior with bent tools; Measuring wall thickness and depth; jam chuck designs for finishing the base;

 

Thin Wall Turning with Binh Pho (woodturning DVD preview)
By: Craft Supplies USA
March 12, 2010 · 9,203 views

A preview of Binh Pho's woodturning video 'Thin Wall Turning' Buy now: https://www.woodturnerscatalog.com/p/99/3691/Turning-Wood-Productions-Thin-Wall-Turning-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Follow along as Binh Pho creates three basic types of thin wall vessels used for decorating- the Thin Wall Vessel, the Open Vessel and the Winged Vessel. Everything you need to know is discussed, including selecting suitable material, proper turning and hollowing techniques, (including an over

 

Back to Basics with Jimmy Clewes (woodturning DVD preview)
By: Craft Supplies USA
March 08, 2010 · 5,731 views

A preview of Jimmy Clewe's woodturning video 'Back to Basics'. Buy now: https://www.woodturnerscatalog.com/p/99/5164/Avanticom-Back-to-Basics-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA New for 2009, this much-anticipated DVD is for woodturners who are just getting started and those who want to refresh their skills. In this 120 minute DVD, Jimmy covers the topics below in detail while providing detailed advice on tools, chucks and getting the best results with your tools. Craft Supplies U

 

Chatterwork and Other Cuts
By: Ron Brown
October 06, 2009 · 7,236 views

Several examples of Chatterwork Cutting and other useful cuts for turned box making. An excerpt from a just released double DVD set 'Turned Lidded Boxed' with Ron Brown. Ebony and maple woods are used. If you have never actually seen a chatter tool in use, this will be very informative. Ron shows you his Picture Framing method with a skew. More info at www.coolhammers.com

 

Speed - Proper Wood Lathe Speed
By: Ron Brown
June 21, 2009 · 50,311 views

An excerpt from the DVD 'I have a lathe. Now what?' by Ron Brown. This is a complete chapter on determining the proper speed depending on the diameter of the work piece. How fast should you turn a 10 bowl blank? A pen blank? a 3 inch table leg? This clip will tell you. More info available at www.coolhammers.com

 

Beads and Coves with Ron Brown
By: Ron Brown
May 17, 2009 · 118,029 views

Educational video clip showing how to properly create beads and coves on a wood lathe using a spindle gouge. This clip is taken from Ron's new DVD entitled, 'I Have a Lathe. Now What?' More info at coolhammers.com

 

Mark St. Leger, Skill Building Projects
By: American Association of Woodturners
May 15, 2009 · 16,361 views

This 7 minute teaser is from the 93 minute DVD, available through the American Association of Woodturners' website: http://www.woodturner.org/shop/Products.asp

 

AAW - Who We Are & What We Offer
By: American Association of Woodturners
March 28, 2009 · 22,177 views

This 10 minute video summarizes the main activities and benefits of membership in the American Association of Woodturners. Visit our website for more information: http://woodturner.org

 

Using a Roughing Gouge
By: Darrell Feltmate
August 09, 2007 · 11,728 views

wood turning a spindle blank to round with a roughing gouge, the basic start to spindle turning http://aroundthewoods.com

 

Return to Turning Videos

Powered by Google

Great Bargains


Free Shipping on All Rockler Orders $35+ every day in February and March, just click here


Rockler Full-Size Ergonomic Carbide Turning Tools

On Sale for only $79.99 each

Save $30.00 each


List price: $109.99

Available with Square Cutter
Click here for more information or to purchase

Available with Square Radius Cutter
Click here for more information or to purchase

Available with Round Cutter
Click here for more information or to purchase

Available with Diamond Cutter
Click here for more information or to purchase


Nova G3 Comet II Reversible Chuck

On Sale for only $125.99 each

Save $64.00 each


List price: $189.99

Click here for more information or to purchase


Excelsior 5-Speed Mini Lathe With Free Bed Extension

On Sale for only $299.99 each

Save $75.59 each


List price: $375.58

Click here for more information or to purchase

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Stainless Steel Bottle Stoppers
Imaginlay
Arizona Carbide

(Click any Ad to go to our Sponsor's Website)