Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Lathe Accessories Videos (235)

Sort by

Or click here to: Search All Videos


E101(2nd upload). Sphere Cutting Jig and First Attempts ·
By: M. Saban Smith Woodturning
November 21, 2017 · 2,166 views

On my second 'day off' after the Harrogate show, I have my first play with the Paul Howard Sphere Cutting Jig. It went pretty well, as you'll see...but the phone battery died so a lot of it is missed. Sorry. You'll get the idea though...until I do a proper video about it.

 

#137 Unboxing My McNaughton Center Saver Disappointing ·
By: Stephen Ogle
November 19, 2017 · 6,475 views

I finally got my Kelton McNaughton Center Saver and began my long anticipated unboxing of my first coring system. I found the quality leaving much to be desired. Here is my unboxing review with my initial impression of this 411.00 tool. Enjoy!

 

Tripple Beal Buffing system modification. ·
By: Woodturning - My Way
November 19, 2017 · 43 views

This is the fifth in my series of videos for my Grandchilren I wanted a tripple buffing system but I didn't like the idea of using a Morse taper. Please be sure to Like and Subscribe to my Channel. Music Dragon and Toast Hall of the Mountain King from YouTube free collection. For more information on how to use a buffing system check out the following Channels WyomingWoodturner https://www.youtube.com/channel/UCRZxyT3UUS8spkIZDAsaFnA Mike Peace Woodturning https://www.youtube.com/channel/UCdIka2H34Kh-9mPhWGLwg_g You can also check out the Southplains Woodturners of Lubbock Texas https://www.youtube.com/channel/UC2rESbdPP2O684iHfwhlLEg

 

My OneWay style Live Centre V ·
By: Colin Laughton
November 13, 2017 · 64 views

 

Amazing Bucket Caddy - Part Two - Design Modification ·
By: Ron Brown
November 11, 2017 · 203 views

Follow up to first video. Design modifications requested by customers. More info at www.ronbrownsbest.com

 

Amazing Bucket Caddy ·
By: Ron Brown
November 06, 2017 · 585 views

Ron Brown introduces an accessory for holding lathe chisels and supplies with a standard Home Depot Type five-gallon bucket. More info at www.ronbrownsbest.com

 

Make It Magnetic ·
By: Gord Rock
November 01, 2017 · 1,115 views

Making a non-magnetic base on an LED light into a magnetic base. Inspired by the one and only Mike Waldt! Link to Mike Waldt's channel: https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w

 

#35 Axminster Tools Multi-Head Live Centre ·
By: Andrew Whale
October 14, 2017 · 817 views

This is my review of the Axminster Tools Multi-head Live Centre. As the centre has a 3/4' x 16tpi threaded end, I also make my own bespoke head to attach to the centre. The live centre offers some great features but I think it could be improved further by providing a facility to lock the revolving head. This would enable the centre to be used as a live centre and help with the creation of bespoke heads. I guess an alternative would be for me to purchase a morse taper with a 3/4' x 16tpi threaded end to use as drive centre - if such an accessory exists. I hope you find this video interesting

 

Powerful Woodturning Lathe Light! ·
By: NorthcountryJim
September 16, 2017 · 23 views

Have you wished for more light at your woodturning lathe? If you have purchased the small spotlights with 500 or 800 lumens and still wished for more light, this may be the solution for you. This is a commercial LED loading dock light with 5 axis of movement and 3,500 lumens. It runs cool as it only draws 38 watts.

 

Tail Stock Steady introduction??? ·
By: Nubsnstubs
September 14, 2017 · 41 views

Trying to show what the Tail Stock Steady and Chuck Plate can do when removing tenons on finished pieces.

 

Einspannhilfsmittel zum Vasen drechseln | Tool for Vessel Turning | Projekt 60 ·
By: Andreas Achleitner
September 13, 2017 · 865 views

Salve! Heute habe ich mir ein Hilfsmittel für die Drechselbank gemacht. Nachdem ich bei der letzten Vase die Öffnung fertig gemacht habe fehlte mir ein Hilfsmittel zur Achsenstabilisierung. Mit dem kleinen Druckbrett kann ich nun den Reitstock zu Hilfe nehmen. Macht das ganze obendrein auch noch sicherer. Mein Name ist Andreas Achleitner und ich arbeite sehr gerne mit Holz. Wöchentlich gibt es auf meinem Kanal mindestens ein neues Video. Die Themenbereiche umfassen von der Theorie bis zur Praxis eine gute Mischung zum Thema Holzbearbeitung. Auf meinem Kanal sind diese Themen in folgenden Pro

 

Evolution Woodturning Handles - Product Overview ·
By: Axminster Tools & Machinery
September 12, 2017 · 1,541 views

Axminster Evolution Series woodturning handles. The steel shaft has a comfortable medium/hard foam covering. The steel shaft adds mass, making the turning process much smoother. The covering is durable, comfortable and gives a positive non-slip grip while you are turning. The business end has a 12-13mm ER20 collet, which firmly grips onto a 12.7mm(1/2') diameter round bar. Originally intended for use with 12.7mm double-ended turning gouges, you can of course grip any turning tool whose bar diameter is between 12mm and 13mm. ER20 collets do not lock up like conventional collets. They are interc

 

020-02-01 WWRJF - RJF Nutty Soft-Touch 19min Jan 12, 2015 ·
By: Richard Ford
August 28, 2017 · 104 views

In this video I describe how to make and use of the Nutty Soft Touch It's another way we can hold work on the lathe. Originally Uploaded Jan 12, 2015 985 Views

 

019 01 01 WWRJF Tool of the Year 2015 13min ·
By: Richard Ford
August 28, 2017 · 25 views

I found this Bottom of the Bowl Tool on Reed Gray aka RoboHippy's Channel https://www.youtube.com/watch?v 0Ov5m50NXJ8 It works great so I nominate it for Tool of the Year 2015 Originally Uploaded:- Jan 10, 2015 3,819 Views

 

Woodturning Tool / Spiral Cutting Jig ·
By: Carl Jacobson
August 24, 2017 · 21,032 views

In this video I show you how to setup and use the Spiral Master. This jig attaches to your lathe and cuts spirals using a sprocket system. A few different routers fit in the jig, but Dick really likes the Ridgid R24012. Checkout the Flutemaster website to see some more project ideas. http://www.flutemasters.com/ TOOLS I USED IN THIS VIDEO: Lathe: http://www.turnrobust.com/ Spiral Master: http://www.flutemasters.com/ Ridgid Router: http://amzn.to/2vggzwh Router bit: http://amzn.to/2g6fmVl Wood Rasp: http://amzn.to/2wzlwEn RZ Mask: Use RZCarl for 15% off your order https://rzmask.com/pages/wo

 

Shop-Made Depth Gauge for Woodturners ·
By: Gord Rock
August 23, 2017 · 1,390 views

How to make and use a Depth Gauge for measuring the thickness of the bottom of a bowl or vessel on the lathe. Requested by Wes.

 

Woodturning Tools / Wood Threading Jig / Sphere Jig Combo ·
By: Carl Jacobson
August 18, 2017 · 7,738 views

This threading sphere jig combo is the newest tool from Chefwarekits. The sphere jig makes 1/2' spheres up to 10' and the threading jig threads inside and outside wood threads. Tool Masters Association: https://www.izzyswan.com/tma-carl/?wpam_id 3 TOOLS I USED IN THIS VIDEO: EZ Sphere threader combo jig: http://www.chefwarekits.com/ Lathe: http://www.turnrobust.com/ Band saw: http://astore.amazon.com/wood01-20/de... Turning tools: http://www.easywoodtools.com/ Turning tools: http://thompsonlathetools.com/ RZ Mask: Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Face

 

Golden Mean Calipers Set of 3 ·
By: Ron Brown
August 15, 2017 · 763 views

Golden Mean Calipers help artists, wood turners and other crafts people easily improve their designs by helping with pleasing proportions. Ron offers an affordably price alternative. More info at www.ronbrownsbes.tch

 

Oneway Banjo. ·
By: Oneway Manufacturing
August 11, 2017 · 234 views

Learn why the Oneway banjo is the best banjo you can purchase. Oneway Website:https://oneway.ca/index.php?route product/search&search banjo

 

Tim's Tools: Speed Center Finders ·
By: woodturningwithtim1
August 07, 2017 · 3,427 views

Specifically designed for woodturners these Speed Center finders help you quickly and accurately find the center of a blank. Visit http://www.woodturningwithtimyoder.com

 

Tim's Tools: Rulers ·
By: woodturningwithtim1
August 05, 2017 · 3,235 views

This is our new line of rulers with the woodturner in mind. To find out more about the rulers visit http://www.woodturningwithtimyoder.com

 

Bowl Sander - Episode 91 ·
By: Paul Lockwood
August 05, 2017 · 3,338 views

After being prompted by a subscriber about making a bowl sander and a link to the video by Marius Hornberger https://www.youtube.com/watch?v myBwALrpYeM I watched another video by Jon Whateley https://www.youtube.com/watch?v BQamRsmUepA, who also makes a bowl sander. Both of these require a lot of shaping on the band saw. I decided to turn all the parts so that everything came from the lathe. I've used the same Oak I did in the last video of the bowl. The only thing I have done is I gave both the heads I made a coat of sanding sealer so that it hopefully gives a better surface for the self ad

 

Tool Review: The Amazing Flat Compass ·
By: RickTurns
August 03, 2017 · 891 views

This is a look at 'the amazing flat compass', a large (24'-25' max diameter) compass that lies flat, instead of upright. It may not be totally amazing, but it's a pretty darn good compass, and well worth what I paid for it. Link to this compass: http://bit.ly/2u5UrIo The music during the close of the video, Happy Little Elves by Audionautix, is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Clark Video Thickness Guide ·
By: The Spin Doctor - TSDr, LLC
July 29, 2017 · 110 views

This is an intro to the Clark Video Thickness Guide for the Clark Deep Hollowing System for woodturning lathes.

 

Nova Outrigger Lathe Accessory ·
By: Keith's Woodwork
June 13, 2017 · 826 views

Installing the outrigger support for nova lathes on my nova Galaxy 1644. This outrigger will fit on a wide range of nova lathes that have a swiveling headstock and allow outboard turning.

 

Hand Drills for Woodturners ·
By: Mike Peace Woodturning
June 07, 2017 · 2,182 views

In this Tip of the Week, I talk about different hand drills for woodturners. I edited the closed caption file for readability in case you are using the closed captions feature. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

DIY Building a Rack to hold my Wood Turning Finish Bottles. aka Spice Rack ·
By: Turning Round
June 06, 2017 · 472 views

On my new Wood Turning Tools Station with drawers, shelves I added a new shelf to hold the bottles for my wood turning finishes. It is a small wooden rack made from reclaimed palette wood. It is a simple project but a very useful one. This is like a spice rack. I am trying to have a new Video every Tuesday. Add to the Bottom of each video. Check out my Etsy Store: https://www.etsy.com/shop/TurningRound Check out my Website: http://turninground.biz/ Or support me on Patreon: https://www.patreon.com/TurningRound Or Find me in Instagram as: TruningRound https://www.instagram.com/turninground/ Thanks for watching.

 

#24 My new logo and branding iron ·
By: Andrew Whale
June 05, 2017 · 589 views

Hi Although I've only been woodturning for less than a year I thought it would be a good idea to create my own brand logo. I also decided to purchase a branding iron to apply the logo to my work. I recently contacted a company called Bolsons Ltd which produces all sorts of things like branding irons, rubber stamps, seals etc. They were really helpful and gave me some very good advice. I then provided them with artwork (in the form of a .jpg) and they duplicated this onto an iron. Their website is www.bolsons.co.uk if you are interested. Please note that I am not sponsored or associated with B

 

Wood Turning - Make a Cone for your live centre & UKIWS news! ·
By: Mike Waldt
June 04, 2017 · 12,561 views

I show my method of making cone support for your live centre, and tell you who's demonstrating a UKIWS in July. UKIWS website - http://www.ukiws.co.uk/ UKIWS on Facebook - https://www.facebook.com/ukiws/ Daniel Vilarino - https://www.youtube.com/user/DanielVilarino Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk

 

Tokar Art - WoodTurning 77 Woodcut Bowl Saver ·
By: Dipa Das
June 02, 2017 · 3,843 views

First time i try my new Tool - Woodcut Bowl Saver.. Working very Good, very Fine..

 

Introducing the Elio-DR ·
By: Tod Raines
May 21, 2017 · 828 views

Produced by Tod Raines of Woodturning Tool Store May 21, 2017 Woodturning Tool Store is introducing the improved Elio-DR (Drawbar Ready). The use of the drawbar with the Elio-DR Safe Drive allows for safer operation as a faceplate without tailstock support. All three standard Elio Safe Drives have been upgraded for the use of a drawbar. Standard 1/4”-20 threads have been added with a threaded insert machined out of solid steel for strength and durability. The drawbar kit is 1/4”-20 threaded rod covered with LLDPE tubing complete with a cone center and two wing knobs. The standard length is 18' and should be cut to length to fit the lathe. Visit Woodturning Tool Store to shop for the Elio-DR https://woodturningtoolstore.com/product-category/lathe-accessories/ Social media links Facebook: https://www.facebook.com/woodturningtoolstore Google : https://plus.google.com/ TodRaines

 

Oneway Tail Stock Swinger ·
By: Oneway Manufacturing
May 09, 2017 · 668 views

Learn how to set up your tailstock swinger in this quick video!

 

My New Tool ·
By: Brendan Stemp
May 07, 2017 · 6,138 views

The DEN-x is a tool used to cut the notches or grooves , at the correct depth, in the body and knob of grinders, that use the Crushgrind mechanism. See this video for more details. Available at https://store.youturn.tv/collections/you-turn-products/products/den-x-double-ended-notch-cutter

 

Lathe Carving Jig / Woodturning projects ·
By: Carl Jacobson
April 24, 2017 · 11,015 views

This is a Trent Bosch carving jig for the lathe, but it also come with an attachment for work off the lathe. This jig is ideal for doing embellishment like pyrography, or carving on a piece. Trent Bosch: http://trentbosch.com/ Tool Masters Association: https://www.izzyswan.com/tma-carl/?wpam_id 3 I upload a new project video every Friday, and I'm live Monday, Wednesday, and Friday. Check out my Twitch channel. https://www.twitch.tv/carljacobson I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.e

 

Pressure and Vacuum Chambers for Resin n' Wood ·
By: Brendan Stemp
March 24, 2017 · 5,835 views

My set up.

 

bowl sander kit ·
By: Jon Whateley
March 11, 2017 · 3,415 views

Watch me make a bowl sander with all the parts needed in 1 easy kit from Prokraft. Some of this kit was inspired by Marius Hornberger a very skilled young German engineer, we recommend visiting his Youtube channel for more great ideas and projects.

 

Apprentice Center Punch ·
By: Craft Supplies USA
March 01, 2017 · 3,682 views

The Center Punch is ideal for marking screw locations and center points on spindle stock. Buy now: https://www.woodturnerscatalog.com/p/88/5114/Apprentice-Center-Punch?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA The Apprentice Center Punch is a simple device that has long been used for making a small dimple in metal and other hard materials, prior to drilling to prevent the bit from wandering. The knurled surface makes it easy to hold the punch firmly in place while applying sufficient pressure to c

 

NOVA Voyager Drill Press Features and Overview ·
By: Teknatool NOVA
February 02, 2017 · 3,241 views

A quick overview of the NOVA Voyager Drill Press

 

Safety Shield for a Wood Lathe with Sam Angelo ·
By: WYOMINGWOODTURNER
November 29, 2016 · 4,346 views

Sam shows his safety shield designed to protect viewers during a demonstration. It is a simple framework which holds a 18 x 24 inch sheet of acrylic. For more woodturning videos, please subscribe to my channel wyomingwoodturner (Not a how to video)

 

09 - Digital Tachometer for HF Lathe ·
By: Bill Rockwood
October 29, 2016 · 2,848 views

Adding a digital tachometer to my HF wood lathe.

 

Woodturning - 4 way calliper ·
By: Marc 's Oneway of turning
October 27, 2016 · 593 views

A new toy in the shop Canada: http://martelhooktool.com/FRA/outils_FRA.html USA: http://www.woodworkersemporium.com/andre-martel-small-caliper-6-to-12/ Europe: http://aupresdemonarbre-tournagesurbois.com/crochets-martel-et-compas-martel/1088-compas-martel-petit-modele.html

 

Woodturning Layout Template ·
By: Craft Supplies USA
October 06, 2016 · 3,434 views

Lay out bowls and platters with the Layout Template from Craft Supplies USA. Learn more: https://www.woodturnerscatalog.com/p/88/2238/Craft-Supplies-USA-Layout-Template?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA The Craft Supplies USA Layout Template is useful for laying out bowls or platters. The circular lines eliminate trial and error in selecting for figure or color in the wood, and avoiding defects. The layout template will help the turner find the desired or possible size in a minimum of time.

 

Woodturning tailstock support pads & mandrel ·
By: Jon Whateley
October 06, 2016 · 327 views

A short video (short is good!) of how to support a workpiece at the tailstock end with no damage using Prokraft SRF, sticky rubber feet. Also short piece on our bottle stopper mandrel with improved flange head nut.

 

Morse Taper Cleaning Tool ·
By: Barry's Woodturning
September 30, 2016 · 700 views

I made a tool to clean the inside of a Morse Taper on the lathe. It is sized to fit the MT2 taper common on many lathes. 'Daily Beetle' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0

 

Youtube Big Chuck video 2 ·
By: J.R. Beall
September 20, 2016 · 618 views

ER 50 collet chucks for wood lathes

 

Sandpaper Organizer ·
By: Turntastic Wood Designs
September 10, 2016 · 502 views

A way to keep small pieces of sandpaper close to the lathe and well organized.

 

Oneway Tailstock ·
By: Oneway Manufacturing
August 31, 2016 · 655 views

 

King Arthur's Tools Signature Accessories w/ Nick Agar ·
By: Craft Supplies USA
August 29, 2016 · 2,933 views

Nick Agar has developed a range of signature accessories for use with the Merlin2. Learn more: https://www.woodturnerscatalog.com/p/198/6768/King-Arthur-Tools-Nick-Agar-Signature-Series-Deluxe-Kit?utm_source youtube&utm_medium descriptiont&utm_campaign videosation Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Recognized around the world for his stunning handcrafted wall pieces and wood sculpture, Nick Agar has developed a range of signature accessories for use with the Merlin2 that are the same as those he uses in his own workshop. When you buy the kit, you save a

 

King Arthur's Tools Merlin2 Quick Change Bristle Brushes w/ Nick Agar ·
By: Craft Supplies USA
August 29, 2016 · 1,644 views

These 2” bristle brushes feature rubberized abrasive fingers that clean and smooth rough areas. Learn more: https://www.woodturnerscatalog.com/p/199/6775/King-Arthur-Tools-Merlin2-Quick-Change-Bristle-Discs?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Available in coarse and medium grits, these handy 2” bristle brushes feature rubberized abrasive fingers that clean and smooth rough areas on burls and other uneven surfaces without changing the shape. Sanding dust left on the surfaces of the sanded area

 

King Arthur's Tools Merlin2 Signature Sanding Discs w/ Nick Agar ·
By: Craft Supplies USA
August 29, 2016 · 757 views

These oversized sanding discs are superb because they are slightly larger than the interface pad they attach to. Buy now: https://www.woodturnerscatalog.com/p/199/6773/King-Arthur-Tools-2.2%22-Sanding-Discs-10-Pack?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA These oversized signature sanding discs are superb because they are slightly larger than the interface pad they attach to. This removes the likelihood of scoring the work piece when sanding because the sanding disc gently rolls over the edge of th

 

King Arthur's Tools Merlin2 Quick Change HTC w/ Nick Agar ·
By: Craft Supplies USA
August 29, 2016 · 881 views

The quick-change HTC is a brilliant accessory that allows you to use many attachments on the Merlin2. Buy now: https://www.woodturnerscatalog.com/p/199/6774/King-Arthur-Tools-Merlin2-Quick-Change-Hexagonal-Threaded-Connector?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA The quick-change HTC (Hexagonal Threaded Connector) backing pad is a brilliant accessory that allows you to use many attachments on the Merlin2, including hook and loop discs (interface pad required), bristle discs and aluminum oxide san

 

King Arthur's Tools Merlin2 All Surface Tungsten Carbide Discs w/ Nick Agar ·
By: Craft Supplies USA
August 29, 2016 · 874 views

These tungsten carbide discs are perfect for all aspects of carving, sculpting and shaping. Buy now: https://www.woodturnerscatalog.com/p/199/6770/King-Arthur-Tools-Merlin2-All-Surface-Tungsten-Carbide-Disc?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Each carbide disc has an abrasive surface throughout including the edge, making cutting lines, v-grooves, sculpting and shaping a breeze. Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodturning tools and supplies in the

 

Oneway 1224 add-on for my Light; Woodturning by Sam Angelo ·
By: WYOMINGWOODTURNER
May 31, 2016 · 3,972 views

Sam adds a flat surface behind the spindle to place his light. The issue is starting out with a round area......and making it a flat, stable surface for the light.

 

King Arthur's Tools Holey Galahad Carbide Carving Discs ·
By: Craft Supplies USA
May 11, 2016 · 69,393 views

Literally 'see through' your work with Holey Galahad Carbide Carving Discs. Buy now: https://www.woodturnerscatalog.com/p/126/6668/King-Arthur-Tools-Holey-Galahad-See-Through-Round-Carbide-Disc?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Designed for use with standard high-speed angle grinders, Holey Galahad carbide discs utilize “see-through” technology that allows you to view the work surface beneath the disc while your working. Being able to see the results as you work eliminates guesswork and ma

 

King Arthur's Tools Merlin2 Mini-Angle Grinder ·
By: Craft Supplies USA
May 11, 2016 · 42,155 views

The Merlin2 Mini-Angle Grinder is built to meet the needs of woodturners and woodcarvers. Buy now: https://www.woodturnerscatalog.com/p/125/6669/King-Arthur-Tools-Merlin2-Universal-Wood-Carving-8-Piece-Set?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA With a wide variety of quality carving attachments and accessories to choose from, it’s truly the ultimate power carving system that offers limitless possibilities. Used and recommended by Nick Agar - Woodturning Artist • Robust spiral gear system for sm

 

Live Center Tailstock - HomeMade from Bicycle Wheel Hub (torno casero) ·
By: Ray MAKES
April 23, 2016 · 19,955 views

making a HOMEMADE live center for my homemade lathe. yes a home made lathe can in fact have a live center, that performs as well as a store bought. the spark of an idea came by bicycling to the farmers market one morning. looking at the front wheel i realized that it could be possible to use a bicycle hub as a bearing containing a center, which obviously is the axle of the wheels. now of course...it is obviously possible. planning on building a lathe? I have built a few but they were quite technical. i thought it would be interesting to build a lathe ONLY from the parts that are already i

 

Wood Turning Robust Live Center Review ·
By: Rock Springs Woodturner
April 21, 2016 · 682 views

A brief review of the Robust live center and a few options for using it. I was not compensated in any way for this review, and regretfully, I purchased the live center at full retail price

 

Spur Drive Center - HomeMade 2 Prong woodturning center (torno casero) ·
By: Ray MAKES
April 19, 2016 · 33,183 views

How to make a spur drive, of the 2 prong variety. this is a video snippet form my homemade lathe series. i know many of you out there have a lathe (or are building a lathe) and need a spur center / drive center /spur drive (which ever you prefer) but don't necessarily want to go out and buy one. well this is my answer to that particular problem. don't let the fact that this is a homemade drive center fool you, it is more than capable of doing the job. i used it recently on a commission job and it worked flawlessly. if you are interested din seeing it in action you can find that particular video here https://youtu.be/BYH8YJk0CV4 if you are interested in the lathe shown in the video you can find that video here https://youtu.be/29QVts4zz64

 

Evolution Pro Drive ·
By: Axminster Tools & Machinery
April 14, 2016 · 4,338 views

These centres are safe, secure and offer greater versatility and accuracy than the usual two or four prong drive centres. The centre features a spring loaded, stainless steel centre point and a sharp toothed outer ring which provides the drive. The Axminster Evolution Series Pro Drive is unique in that you can vary the spring tension. There are numerous advantages when using this drive. Repositioning your work is accurate; the work always goes back in the same place. They are safe; reduce the pressure from the tailstock and in the event of a dig-in the work will simply stop revolving. Re

 

making a Disk Sander for the Lathe ·
By: Fabian's Tiny Workshop
April 08, 2016 · 6,480 views

I'm making a disk sander for my lathe with just a faceplate and a piece of scrap wood.

 

Elbo Introduction ·
By: woodturningwithtim1
April 06, 2016 · 13,412 views

The Elbo Tool is easy and quick to setup and provides fingertip control while you hollow. Visit www.woodturningwithtim.com to learn more about the Elbo Tool.

 

#1 Hunter Tapered Shoulder Tool: review by Sam Angelo ·
By: WYOMINGWOODTURNER
April 02, 2016 · 4,832 views

Sam shows the capabilities of a sweet little hollowing tool, the Hunter Tapered Shoulder tool. With a cut-a-way view of a small hollow form he shows the tool at work inside the vessel.

 

Lathe Tools Drawer ·
By: RJBWoodTurner
February 28, 2016 · 5,064 views

I wanted to add a drawer below my lathe table to hold my tools. The drawer has no bottom so it doesn't collect chips. Another added benefit is I can get rid of my old tool stand freeing up space in the shop. Regards, Bob

 

Homemade Lathe Faceplate ·
By: Daniel Vilarino
February 28, 2016 · 95,546 views

Hola amigos! Este video está en Inglés, si prefieres verlo en Español, por favor, haz un click en el siguiente enlace: https://youtu.be/TsyuEt35ZFY ***This video is in English.*** En los dos videos anteriores, mostré dos métodos diferentes para realizar cuencos sin el uso de un mandril de garras, solo usamos bloques de pegado (o bloques de sacrificio) y un plato de tornillos. Estos últimos son generalmente fáciles de adquirir y por lo general todo torno viene con uno de ellos, pero qué sucede si no tenemos siquiera un plato de tornillos? Bueno, la idea de este video es mostrarles como fabrica

 

Woodturning at 54a. #64. Laser engraver ·
By: Keith Barrow
February 27, 2016 · 2,828 views

Here's a quick look at my new laser engraver,which I will be using mainly to make my logo discs.

 

Beefing up the lathe stand by Al Furtado ·
By: Rebel Turner
February 15, 2016 · 1,870 views

Beefing up the lathe stand this is an attempt to add weight and ruggedness to my lathe I think later on I will add a concrete base to it. I do a turning to test the waters after the completion of the stand. Wood turning tutorials as well as tool modifications

 

How to make a Wood Centering tool from a Cherry Pen Blank ·
By: OG Timbercraft
February 12, 2016 · 246 views

How I made a wood Centering Tool from a Cherry Pen Blank Plus Channel Spot Light :Donald Mathews Donald Vlogsify's Wood Shop: https://www.youtube.com/channel/UCBIE... Shot by Orey Garcia on Samsung Galaxy S6 Edited on Sony Imagination Studio Platinum 12 Music is YouTube free to use: Voyeur February 2016 I know to be the one of the best woodworker or one of the top woodworker of you tube you have to learn from the most popular woodworkers and do as they do. I subscribe to over 200 top wood working channels and most of what I show in my video I have learned form them feel free to browse

 

Lathe / woodturning mobile tool storage . ·
By: Ethan Cook
February 07, 2016 · 658 views

My local Woodcraft was getting rid of their old woodturning tool storage unit that is on casters What a treasure to find and add to my shop! Check it out and see how I put my tools in it. Get your SHOP organized! Let's be more efficient! Facebook.com/cookcrafted Etsy.com/shop/cookcrafted

 

My Favorite Tool by GWA ·
By: Gwinnett Woodworkers
January 20, 2016 · 5,145 views

This program is one of the favorites at Gwinnett Woodworkers. Various members of GWA present their favorite shop tool(s) and describe how and where they use it. Recorded and presented in HD 01-09-2016 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

NOVA Comet II Accessory: Grinding Wheel with Carmen De La Paz ·
By: carmendelapaz
January 14, 2016 · 1,899 views

Carmen De La Paz shares the installation of the NOVA Comet II Accessory: Grinding Wheel and how it works.

 

Making a Sanding Disc for the lathe ·
By: MARK Baid
January 10, 2016 · 880 views

As it is for a lot of us room is always a factor in my shop. Well I made a sanding disc that attaches to my lathe and it takes up practically no room at all. This is by no means my idea. Many other have done it. This is just the way I did mine.

 

woodturning # 25 making a sanding disk for the lathe ·
By: Woodslee Summercraft
January 03, 2016 · 3,556 views

make this 8 inch sanding disc for your lathe, save money and space. 1'8tpi spindle, 8' sanding disc

 

AXMINSTER LATHE EXTENSION AND WORK BENCH ·
By: Gary Harris
December 28, 2015 · 925 views

HERE IS MY LATHE EXTENSION AND NEW WORK BENCH FOR THE LATHE

 

Nova Live Center System Review and Demo ·
By: Mike Peace Woodturning
December 11, 2015 · 8,640 views

I demonstrate the highly versatile Nova Live Center System. This high quality and flexible system can be used in a wide variety of ways to provide tailstock support for just about any woodturning project. Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! Check out my blog for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers channel. MikePeaceWoodturning.blogspot.com

 

Woodturning Tool Storage and UKIWS ·
By: Custom Chris
November 22, 2015 · 2,617 views

http://www.ukiws.co.uk For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Alex Amoruso - Homemade dust collection hood for woodturning lathe ·
By: Ocean Woodturners
November 19, 2015 · 1,555 views

Alex Amoruso explains how to use and build a homemade dust collection hood which gets mounted on a lathe at the Ocean Woodturners November 2015 meeting in Rumford, RI. For more information visit http://www.oceanwoodturners.com

 

Super Nova Lamp by WoodturnersWonders.com ·
By: missouriturner
November 17, 2015 · 3,629 views

Ken Rizza explains the features of the Super Nova Lamp. Including a 286 pound pull magnet, 870 lumens, 9 foot power cord and a 30 inch neck. For more information and pricing go to: woodturnerswonders.com.

 

Wood Turning #122 Texted The Real Brass Point ·
By: The Tiny Trailer Workshop
November 14, 2015 · 366 views

After losing pieces left right and center I finally managed to get this together! First off I lost the bolt from which this was turned and then once I got the first one turned I lost the cup drive! It will all show up again eventually.... but when you want to turn something now.... eventually just doesn’t cut it! I believe that I will make more of these down the road... I think that there may be shapes which will help certain projects even more... but unless it is an earth shatteringly new concept... I think you will have seen enough points for now! Surprise surprise! I managed to save some of

 

Wood Turning #122 The Real Brass Point ·
By: The Tiny Trailer Workshop
November 14, 2015 · 683 views

After losing pieces left right and center I finally managed to get this together! First off I lost the bolt from which this was turned and then once I got the first one turned I lost the cup drive! It will all show up again eventually.... but when you want to turn something now.... eventually just doesn’t cut it! I believe that I will make more of these down the road... I think that there may be shapes which will help certain projects even more... but unless it is an earth shatteringly new concept... I think you will have seen enough points for now! Surprise surprise! I managed to save some of

 

Ultimate Sanding System ·
By: missouriturner
November 14, 2015 · 404 views

Ken Rizza with woodturnerswonders.com explains his Ultimate Sanding Kit. Be sure to check out all of their other products: CBN Grinding Wheels, Lighting Products and much more.

 

Lathe Footswitch And.... A Rant ·
By: Blind Wood Turner
November 12, 2015 · 808 views

In this episode, Chris shows you a footswitch that has been made for him so he can operate his lathe more safely. A big 'THANK YOU' to John Walters.

 

Wood Turning #121 Texted Getting the Point ·
By: The Tiny Trailer Workshop
November 06, 2015 · 382 views

www.ukiws.co.uk UK & Ireland Woodturning Symposium Coventry, 18th and 19th June 2016 So this is a case of a shop that needs cleaning more than anything else! I am sure that the original will surface at some point! I used a screw this time because even though I had secured both a bolt and a screw made from brass... the point at which I was about to turn on the cameras.... I realized that the bolt was missing! I looked and looked but was unable to find it... so I went with the screw anyway! On the day I finished editing the first video.... I found the bolt! The difference it will make is that

 

Wood Turning #121 Getting the Point ·
By: The Tiny Trailer Workshop
November 06, 2015 · 697 views

www.ukiws.co.uk UK & Ireland Woodturning Symposium Coventry, 18th and 19th June 2016 So this is a case of a shop that needs cleaning more than anything else! I am sure that the original will surface at some point! I used a screw this time because even though I had secured both a bolt and a screw made from brass... the point at which I was about to turn on the cameras.... I realized that the bolt was missing! I looked and looked but was unable to find it... so I went with the screw anyway! On the day I finished editing the first video.... I found the bolt! The difference it will make is that

 

KJR LED Lathe Lamps ·
By: Craft Supplies USA
November 05, 2015 · 5,360 views

With the KJR family of LED lathe lamps, you can count on them to help take the guesswork out of turning. Buy now: https://www.woodturnerscatalog.com/t/90/Shop-Supplies?b 254&utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Having a high quality light source at your lathe is crucial to doing your very best work. KJR’s line of LED Lathe Lamps offer dependable, bright light for all of you woodworking needs. While each KJR boasts their own characteristics, they all share key features alike… • High Lumen out

 

Lathe Center Rack ·
By: Peter Matthew
October 23, 2015 · 847 views

This week I made a rack for all of my live centers, spur drives, and anything else that goes in my lathe. -------------------------------------------------------------------- If you would like a Peter Matthew shop sticker, send me an email! Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080

 

Woodturning Tool Review Buffing System Update ·
By: As Wood Turns
October 09, 2015 · 4,011 views

http://www.AsWoodTurns.com After I reviewed my Beall buffing system, I received several great suggestions mainly to take it apart and mounts the buffing wheels directly to my lathe. Since the triple buff system has some utility as is, I decided to keep it as is but purchase three new buff wheels to use on my lathe. Each mount consists of: 1. 3/8 inch by 2 inch bolt 2. Lock washer 3. 2' diameter washer with 3/8 inch hole 4. 3/4 inch wood spacer with 3/8 inch hole and about 1/4 inch thick. This helps the buffing wheel center on the bolt. I turned mine from scrap wood. 5. Another 2' diameter wash

 

Powermatic Tailstock Swing Away ·
By: Craft Supplies USA
October 07, 2015 · 5,440 views

The Powermatic Tailstock Swing Away bolts onto your lathe bed, allowing you to store your tailstock conveniently out of the way. Buy now: https://www.woodturnerscatalog.com/p/193/6511/Powermatic-Tailstock-Swing-Away?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Tired of lifting your heavy tailstock off the floor and wrestling it onto the lathe? With the Powermatic Tailstock Swing Away, you’ll never have to do it again! Just loosen the locking handle and swing the tailstock down and away for storing.

 

Powermatic Tailstock Swing Away (3D Rendering) ·
By: Craft Supplies USA
October 07, 2015 · 2,279 views

The Powermatic Tailstock Swing Away 3D Rendering. Learn more: https://www.woodturnerscatalog.com/p/193/6511/Powermatic-Tailstock-Swing-Away?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Tired of lifting your heavy tailstock off the floor and wrestling it onto the lathe? With the Powermatic Tailstock Swing Away, you’ll never have to do it again! The NEW Powermatic Tailstock Swing Away simply bolts onto your lathe bed allowing you to store your tailstock conveniently out of the way without removing it

 

woodturning at 54a. #36. A simple drum sander for the lathe ·
By: Keith Barrow
October 04, 2015 · 3,044 views

A quick look at how easy it is to make a simple drum sanding attachment for a lathe.

 

Lathe Cabinet Build ·
By: Jerry Brown
September 14, 2015 · 1,256 views

I was using the Lathe Cabinet and the drawers fell apart - then the face frame fell off... kept dropping tools and stuff down the dust hole - so I rebuilt it like it should of been built!

 

Lathe Tool Rack ·
By: Jerry Brown
September 12, 2015 · 882 views

I made a new tool rack off to the side of the lathe blades up and on a lazy susan! I like it I kept dropping tools that were hitting the storage rack in front of me and this is much better.

 

Lathe Attachment Organizer ·
By: Jerry Brown
September 11, 2015 · 608 views

I am back and have a long list of catch up to do! I have about 200 videos to get before the end of the year and I am gonna try my best to get there!

 

No-Lock Spindle Washer (lathe spindle accessory) ·
By: Craft Supplies USA
August 12, 2015 · 6,605 views

Tired of your chuck or faceplate getting stuck on your lathe spindle? Buy now: https://www.woodturnerscatalog.com/p/112/5507/Turners-Select-No-Lock-Spindle-Washer?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA The specially designed No-Lock Spindle Washer is the answer. Simply insert the Washer onto your lathe spindle, then thread on your chuck and you’re ready to go. When you’ve finished turning, you can now unthread your chuck with ease. Available in multiple sizes and constructed with abrasion resi

 

Ron Brown's Universal And Quad Setting Jigs------- Review by Sam angelo ·
By: WYOMINGWOODTURNER
August 10, 2015 · 5,324 views

Sam takes a look at two of Ron Brown's tools for setting the angles on various woodturning tools. The Universal setting jig and Quad setting jig...... visit Ron's website @ http://ronbrownsbest.com/index.php?route product/product&path 2&product_id 463

 

Zulu Ukhamba style basket Illusion by BDG ·
By: Hidden Concept Insert
August 10, 2015 · 475 views

This Zulu Ukhamba style basket Illusion is made from Oak and stands 12 inches tall, 9 inches wide. The design consists of over 11,000 pyrographed and colored beads.

 

Amazing Flat Compass ·
By: Ron Brown
August 03, 2015 · 1,851 views

Ron introduces a new twist on an ancient tool. This compass works with pencils, pens and large sharpies. It is ideal for laying out wet bowl blanks for bandsawing prior to turning. More info at ronbrownsbest.com

 

Pen-Ultimate Assembly Tool (pen press) ·
By: Craft Supplies USA
July 14, 2015 · 6,514 views

Turn your lathe into the ultimate pen press with the Pen-Ultimate Assembly Tool! Buy now: https://www.woodturnerscatalog.com/p/16/2798/Artisan-Pen-Ultimate-Assembly-Tool?utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Designed to fit into the morse taper in the headstock and tailstock of your lathe, the Artisan Pen-Ultimate Assembly Tool turns your lathe into the perfect pen press. The screw feed action of your tailstock provides precise pressure control during the assembly process helping avoid cracked

 

#20 air cleaner update ·
By: Keith Barrow
July 11, 2015 · 568 views

Description

 

Lathe Chisel Rack ·
By: Peter Matthew
July 09, 2015 · 3,926 views

For a written and more detailed tutorial, plans, and a cut list, please visit my instructables: http://www.instructables.com/id/Lathe-Chisel-Rack/ This week I made two racks to hold all of my lathe chisels. I've been wanting a better system for my chisels for a long time now and I kind of just started making up my own design as I made these. These were really easy to make and although I used my bandsaw, drill press, and table saw, you could make this project with only a circular saw and a drill.......but making it with a bandsaw, drill press, and table saw is so much easier! Remember to come back next Tuesday for a special video! Please subscribe and I'll see you then! Check out my eBay store: http://www.ebay.com/usr/dste6080 Contact me: peterturnswood@gmail.com music: Music: Octopussy by Juanitos is licensed under a Attribution 2.0 France License. http://freemusicarchive.org/music/Juanitos/Exotica/juanitos_-_01_-_octopussy

 

Woodturning - CBN Wheels ·
By: Mike Waldt
July 06, 2015 · 54,791 views

My thoughts and opinions on CBN Wheels, and a look at my particular set up. Martin Saban-Smith's Channel: https://www.youtube.com/user/workingimage D-Way Tools Channel: https://www.youtube.com/channel/UC8jsr2OBog-RwMjbNvYJ8Lg Robo Hippy's Channel: https://www.youtube.com/user/robohippy Robo Hippy's paper on CBN Wheels: http://www.robohippy.net/featured-article

 

Abranet Sanding Strip review ·
By: Jake Webb
June 05, 2015 · 987 views

An unsponsored review of Abranet sanding strips. Music: http://www.purple-planet.com

 

Hack together a burning wire tool ·
By: RickTurns
May 21, 2015 · 28,901 views

Make a quick and easy burning wire tool to burn decorative lines into woodturnings.

 

Lathe-Driven Variable Speed Turntable ·
By: Gord Rock
May 13, 2015 · 3,925 views

I needed a turntable running at a very low rpm. Rather than buy one I wanted to make one to my own specifications. This is what I came up with. Link to Dipa Swarupa's Channel: https://www.youtube.com/channel/UCDhLtJUPM96lDhhMgbnSZGA Sorry, I mispronounced his name and also misspelled it.

 

Molotow Markers ·
By: Craft Supplies USA
May 12, 2015 · 6,863 views

Take dyeing and coloring to a whole new level with Molotow empty pump markers. Learn more: https://www.woodturnerscatalog.com/p/46/6426/Molotow-Pump-Marker-w-Bulb-Pipette?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: http://www.youtube.com/user/CraftSuppliesUSA Using your favorite wood dye, you can color your work anyway you like to add beauty and interest to your woodturnings. Molotow markers allow you to easily draw in patchwork patterns or add color to particular areas of the piece while leaving the rest of the wood natural. After you

 

Belt Sander on the lathe ·
By: DrexlFlo
May 08, 2015 · 8,679 views

Deutsche Version des Videos: http://youtu.be/ZiWu3t5hnGU After a few questions on my last video I decided to do a presentation video about my belt sander. Facebook: https://www.facebook.com/drexlflo/ Twitter: https://twitter.com/drexlflo/ Instagram: https://www.instagram.com/drexlflo

 

An update to my chuck removal tool ·
By: RickTurns
April 28, 2015 · 743 views

I've made a couple of minor changes to my chuck removal tool that make it slightly better.

 

Make a Headstock Spindle Washer ·
By: RickTurns
April 20, 2015 · 3,231 views

Make a non-stick washer for your headstock spindle. Save 1's of dollars! Keep that chuck or faceplate from welding itself onto your headstock.

 

Naked Turner Tool Caddy For My Lathe ·
By: Erik Anderson
April 18, 2015 · 1,826 views

This is a quick video of a tool caddy I made for the end of my lathe.

 

Make a Chuck Removal Tool ·
By: RickTurns
April 17, 2015 · 2,139 views

This chuck removal tool makes easy work of dislodging a woodturning chuck that has 'frozen' onto the lathe headstock spindle. It is easy and quick to make.

 

Make a better knockout bar - part 2 ·
By: RickTurns
March 30, 2015 · 1,289 views

Make a more elegant and more effective knockout bar for your woodturning lathe. The knockout bar started in part 1 is finished in this video. The beginning of this project is at this YouTube video: http://youtu.be/Lli5ZQy66nE

 

Make a better knockout bar - part 1 ·
By: RickTurns
March 30, 2015 · 2,390 views

Make a more elegant and more effective knockout bar for your woodturning lathe. This knockout bar adds a weighted sliding handle and a brass tip to the simple rod knockout bar. The conclusion of this project is at this YouTube video: http://youtu.be/XSx8_CQAfZk

 

Make a tool rest - part 6 - Brazing ·
By: RickTurns
March 19, 2015 · 6,290 views

In this sixth and final video in my series of videos about making a tool rest (without welding!), I braze the arm to the post, and then the wear strip to the arm. After cleaning up the new tool rest, I cut and adjust the height on the lathe. The manufacturer's video on using the oxy-mapp torch is here: https://youtu.be/a38PdQkcInA Jan 23 2016 - this just in! Lyle Jamieson passed on a suggestion to put a wedge of wood in the right angle of the angle iron, so that if the tool slips off the end (or even the lip) of the rest, you'll be less likely of catching a finger or two. Sounds like a good idea to me.

 

Lathe wall built ins ·
By: Rebel Turner
March 16, 2015 · 545 views

I utilized my wall framing in my shop to create some very usable build ins with 5/8 construction grade plywood. This is a cheap build and in my case free.

 

Make a tool rest - part 5 - Cutting ·
By: RickTurns
March 10, 2015 · 3,498 views

In the fifth video of my series on how to make a tool rest for your woodturning lathe (without welding!), I show how to cut the metal pieces for the tool rest, how to square off the top of the post, how to tap the hole in the top of the post, and where to drill the arm.

 

Robust Ring Drive Center - Product Review at The Woodturning Store ·
By: The Woodturning Store
March 10, 2015 · 13,160 views

In this video I check out the Robust Ring Center drive which is an add-on to the Robust Cup Center drive. I really try to give it a workout, taking big cuts at high speed. The ring drive does a great job ... but you will have to check it out for yourself Watch Woodturning How-To videos with Steve Fulgoni at The Woodturning Store. Steve shows woodturning tips, turning techniques, woodturning product reviews and support for Hurricane Turning Tools and Robust Lathes. Please subscribe to The Woodturning Shop and send me any comments or suggestions. Check out my website at: http://www.thewoodturningstore.com or http://www.woodturner.co. On my website you will find Hurricane Tools and Chucks, Projects Supplies and I am also an authorized dealer for Robust Lathes and tools

 

Make a tool rest - part 4 - Sizing ·
By: RickTurns
March 04, 2015 · 6,180 views

In the fourth video of my series on how to make a tool rest for your woodturning lathe (without welding!), I describe how to determine the best height for the tool rest post.

 

Native American design oak by BDG ·
By: Hidden Concept Insert
March 03, 2015 · 498 views

Native American design oak beaded basket

 

Hopi design maple basket by BDG ·
By: Hidden Concept Insert
March 02, 2015 · 874 views

Segmented, turned, beaded and painted

 

Make a tool rest - part 3 - Materials ·
By: RickTurns
February 28, 2015 · 6,855 views

In the third video of my series on how to make a tool rest for your woodturning lathe (without welding!), I describe the materials (primarily steel) needed to make the toolrest, including the average costs and several online sources. As mentioned in the video, here are URLs for various sources of steel and silver braze: Online Metals (metals) http://bit.ly/1E5nQAr Metals Depot (metals) http://bit.ly/1Ao3kDx Speedy Metals (metals) http://bit.ly/1zOizqj Enco (metals) http://bitly.com/1DmE8iT MSC (metals) http://bitly.com/1BqQF8h Airgas (for silver braze) http://bitly.com/189BEMa

 

Make a tool rest - part 2 - Tools ·
By: RickTurns
February 27, 2015 · 7,933 views

In the second video of my series on how to make a tool rest for your woodturning lathe (without welding!), I describe the different tools you'll need to do the work, including the most likely costs and several online sources. Here are some links for tool sources: For the Oxy-MAPP torch kit http://bit.ly/1AR99gt http://bit.ly/1E3ImRX http://bit.ly/1DZdbFO For the 4 1/2 inch angle grinder http://amzn.to/1EU9hwq http://thd.co/1MYhc1c For the tap-drill combo http://amzn.to/1BGNk6O http://thd.co/1wupGs4 For silver brazing material http://bit.ly/1BGMWp0 http://bit.ly/17Dgx4O

 

Make a tool rest - part 1 - overview ·
By: RickTurns
February 25, 2015 · 27,120 views

Woodturning: Make a tool rest of any length for your woodturning lathe, using silver brazing. No welding required! Jan 23 2016 - this just in! Lyle Jamieson passed on a suggestion to put a wedge of wood in the right angle of the angle iron, so that if the tool slips off the end (or even the lip) of the rest, you'll be less likely of catching a finger or two. Sounds like a good idea to me.

 

Link to Miguel Sanchez Friction Sander ·
By: Erik Anderson
February 21, 2015 · 1,278 views

Here is a link to Miguel Sanchez's Video on how he made a friction sander : https://www.youtube.com/watch?v kAjD9aMG39QAnd

 

Portable Lathe Stand ·
By: Carl Jacobson
February 20, 2015 · 17,997 views

I found a bathroom cabinet that worked out great for a portable lathe stand. I'm going to be demonstrating at the Oregon Woodturing Symposium March 6,7,8th. I'd love to have you stop by if you're in the area. Photos for Capt. Eddie send to Mark Baid at mbaid1224@gmail.com Oregon Woodturing Symposium http://oregonwoodturningsymposium.com/ I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits https://www.chefwarekits

 

The Woodfast Universal and Bowl Callipers ·
By: Brendan Stemp
February 12, 2015 · 3,720 views

A review of the Woodworking Solutions Universal and Bowl Callipers. Check them out at http://store.youturn.tv/collections/measuring-tools or http://woodfast.com.au

 

Proxxon Rotary Tools Micromot 50 and 50/E ·
By: mhcrafters
February 09, 2015 · 387 views

Available at http://mhcrafters.com

 

Lathe Stand Drawers ·
By: Jerry Brown
February 06, 2015 · 1,018 views

Making Drawers for the lathe stand - note: DO NOT use the saw and heater... and if you switch to drawers instead of doors make sure you have KNOBS! :) Typical day at the shop but cold and finishing off the lathe stand to e more Purty!

 

Turn a Wood Morse Taper Mandrel ·
By: Mike Peace Woodturning
February 04, 2015 · 21,524 views

Mike demonstrates how to turn a simple wood mandrel to fit the Morse Taper of your lathe spindle. This versatile mandrel can be used to hold a number of small spindle projects on the lathe without a scroll chuck. Projects suitable include light or fan pulls, whistles, pill boxes, ornaments and more. Check out my blog for demonstration handouts, downloadable copies of articles I have published, and links to some full length deomonstrations I have done at Gwinnett Woodworkers channel. http://mikepeacewoodturning.blogspot.com

 

Reed Gray aka Robo Hippy Presents | A NATURAL SANDING HOOD ·
By: robohippy
January 29, 2015 · 1,938 views

Robo Hippy shares a useful tip for that bowl that is just sitting on your wood shop shelf

 

Youtube Threader 3 0 ·
By: J.R. Beall
January 28, 2015 · 5,426 views

The improved Wood Threader from Beall Tool Co.

 

Mini Lathe Bench Grinder ·
By: Gabe Castro
January 23, 2015 · 1,524 views

How to make a home made bench grinder for wood lathe.

 

Lathe Table ·
By: Jerry Brown
January 22, 2015 · 2,407 views

Lathe Table - or Stand... I am not sure why but it kept asking for more of me ... something supposed to be simple and no, stop doing the insulation and shop renovations and work on this! The new lathe table/stand has a bbuilt in dust chute on the back, no more pile up of wood chips and with the lathe rack mounting to the wall behind it I can keep the surface area clean!

 

A Tenon Cutter from a Wrench ·
By: RickTurns
January 21, 2015 · 44,511 views

Woodturning: Make an accurate tenon sizing cutter from an open end wrench. Several other Youtube videos discuss this technique: Cap'n Eddie - Perfect Tenons https://www.youtube.com/watch?v qATykxAuZ-E AsWoodTurns - Easy DIY Tenon Cutters https://www.youtube.com/watch?v C4gO1jA2d0g RJBWoodTurner - Home Made Tenon Tool https://www.youtube.com/watch?v CEqroK7qIRY

 

How To Make A Lathe Rack ·
By: Jerry Brown
January 19, 2015 · 1,265 views

Collaborating with Brian Gidney of Summers Woodworking to make a lathe tool rack

 

Lathe Accessories Organizers ·
By: Cip's Wood Chips
November 30, 2014 · 4,072 views

I got tired of searching my shop for accessories, so I decided to organize all my lathe accessories in one location.

 

Sanding the foot of a Bowl with a Die Grinder ·
By: WYOMINGWOODTURNER
November 23, 2014 · 3,039 views

Sam shows another method for sanding and finishing the bottom of a bowl using a die grinder as a sander

 

 

little sand paper rack, using scrap oak ·
By: Rich McNatt
November 17, 2014 · 1,696 views

Got some sand paper on a roll and needed somewhere to put it, I had 20 min and some scrap ( also did not feel like spending the time to clean up a little, ) Enjoy dont for get to Subscribe, like, dislike, and comment! now go build something!!

 

Wood Turning - Carter & Sons Tool Review ·
By: Mike Waldt
November 14, 2014 · 8,208 views

I review two tools from the Carter & Sons range of premium wood turning tools. Carter & Son website: http://carterandsontoolworks.com/ The Toolpost UK website: http://www.toolpost.co.uk

 

Drawbar for Wood Lathe ·
By: Cip's Wood Chips
November 10, 2014 · 6,662 views

This video shows how I made a drawbar for my wood Lathe. It will be used with my arbor screw-chuck and drill chuck. Tiny Trailer Workshop https://www.youtube.com/channel/UClek5Vj9XQWnQQQB73uAaRQ

 

The Differences in Sanding Discs 2014 ·
By: Vinces WoodNWonders
October 20, 2014 · 2,918 views

This video explains differences in discs offered from VincesWoodNWonders.com!

 

Monster Articulated Arm Hollowing System Tool Review ·
By: Ray VanDerMei
September 28, 2014 · 5,010 views

In this video i will show you a collection of great vases and hollow forms that i have made with my monster hollowing system. I also go over what i like and don't like about the system. This is an honest review of a great hollowing system. Hope this video will help you in your quest to find the right hollowing system for you. If you have any further questions leave a comment below and i will be sure to answer it for you Ray

 

Hidden Concept Insert home page ·
By: Hidden Concept Insert
September 18, 2014 · 19 views

What you can do with the Hidden Concept Insert

 

Hidden Concept Insert ·
By: Hidden Concept Insert
September 18, 2014 · 22 views

Video about what you can do with a Hidden Concept Insert

 

how to use a gauge ·
By: Hidden Concept Insert
September 09, 2014 · 15 views

In this video It shows how the gauge can make life so much easier. The Insert can be installed without the gauge but saves you the time and trouble of making accurate measurements.

 

Videos "only" about installing the Hidden Concept Insert ·
By: Hidden Concept Insert
September 09, 2014 · 21 views

There are no videos about 'how to make a segmented turning' only videos about how to design a vase and install the Hidden Concept Insert. Before attempting you should already know how to make a segmented turning.

 

The Blind Wood Turner - Episode 6 - Using A Sizing Gauge ·
By: Blind Wood Turner
September 03, 2014 · 406 views

In this installment, I have my first little go with a sizing gauge which should help me get perfect diameters and tenons every time.

 

Poor Mans Drum sander ·
By: Rich McNatt
August 30, 2014 · 15,568 views

This little sander was inspired from seeing it used on one of Stephen Ogle's videos, This one needs a few tweaks but all and all worked out nicely. Give it a look let me know what you think.

 

Lathe tool rest and countershaft built ·
By: Rebel Turner
August 17, 2014 · 1,158 views

I have built a lathe tool rest and a countershaft to go with my lathe riser blocks

 

Turners Laser Guide (review by Sam Angelo): Ron Brown's Best ·
By: WYOMINGWOODTURNER
August 07, 2014 · 8,497 views

Sam Angelo reviews the 'Turners Laser Guide' The laser guide offers a simple and reliable way to know where your cutting edge is when hollowing, coring, and using many other wood turning tools. This tool is offered by Ron Brown visit--- http://www.coolhammers.com for more information.

 

Improved Lighting For The Lathe ·
By: Gord Rock
August 06, 2014 · 1,567 views

I needed to improve the lighting at my lathe. This is what I came up with.

 

Woodturning - Right Angle Sanding Platform ·
By: Kevin Krull
July 29, 2014 · 2,732 views

For this segment of Tips and Techniques I demonstrate how I made my right angle sanding platform out of some scrap MDF.

 

Woodturning - 12 Sanding Disc ·
By: Kevin Krull
July 17, 2014 · 59,583 views

For this segment of Tips and Techniques I demonstrate how I make my sanding discs out of scrap MDF and a 2x4 cutoff. I use double faced carpet tape to attach the sandpaper to the sanding disc.

 

Honestar CBN Honing Stone ·
By: Craft Supplies USA
July 16, 2014 · 4,056 views

The Honestar CBN 'stone' makes honing the flute and bevel on turning and carving tools quick and easy. Buy now: https://www.woodturnerscatalog.com/p/96/6156/Honestar-CBN-Honing-Stone?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Not only does the CBN abrasive on the Honestar cut faster and last longer than other types of honing stones, the formed metal shape makes means it's lightweight, can't break and fits comfortably in your hand. Unlike other less expensive hones that rely on adhesive to ho

 

Raptor R3X Grinding Wheel Bushings ·
By: Craft Supplies USA
July 16, 2014 · 11,534 views

This bushing kit is a precision system specifically designed for use with Norton 3X grinding wheels. Buy now: https://www.woodturnerscatalog.com/p/97/6196/Raptor-R3X-Grinding-Wheel-Bushing-2-Piece-Set?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Our experience has shown that knockout bushings and stock wheel washers almost always result in run-out and vibration on Norton 3X wheels, making it difficult or impossible to eliminate. Our R3X grinding wheel bushing kit is designed to fit directly in

 

NOVA Tailstock Adaptor 5016 ·
By: Teknatool NOVA
June 25, 2014 · 2,769 views

NOVA Tailstock Adaptor 5016 allows for perfect alignment when remounting work to turn the other side in dead or live mode, saving you time and material normally wasted in truing work piece up. Ensures the most accurate remounting of projects. Fits all NOVA chucks and NOVA lathe tailstocks, tailstocks with 2MT internal shafts. Fits the NOVA Live Centre System -- or can also be used individually as a dead centre. Quick mounting. Made from medium tensile carbon K1045 steel to provide maximum structural strength. For more information or to buy, visit http://amzn.com/B0064JJ49Y or contact your local dealer. To stay up to date on all things NOVA 'Like' us at Facebook.com/NOVAwoodworking

 

WOODTURNING SANDING Disk Holder ·
By: Robbiethewoodturner
June 05, 2014 · 22,805 views

Carl Jacobson https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Here is a video on how to make a A WOOD TURNERS,Sanding Disk Holder for power sanding http://robbiethewoodturner.net

 

VincesWoodNWonders Palm Sanders 2014 ·
By: Vinces WoodNWonders
May 26, 2014 · 1,418 views

Both Palm Sander and Curved Palm Sander provide a very comfortable hand sanding experience. Both are made from durable foam with Velcro face allowing you to hand sand for years with comfort!

 

Woodworking - lathe stand ·
By: Thomas Anton Geurts
April 18, 2014 · 7,765 views

my latest project.

 

Wood Turning - Powered Up and Tuff Saws ·
By: Mike Waldt
April 14, 2014 · 6,538 views

I now finally have power again in the shop, a quick update, and a mention of a good source for Band Saw Blades, the link is below : http://www.tuffsaws.co.uk/index.php?route common/home

 

#87 Sistema de lijado facil - Easy sanding system ·
By: Miguel Sanchez
April 07, 2014 · 240,003 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Espero que este sistema os facilite un poco el lijado de cuencos y platos y demas. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#86 Calibre de grosor gratis - Thickness caliper on the cheap ·
By: Miguel Sanchez
April 01, 2014 · 11,044 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Otro truco facil y util para seguir con la serie. Espero que os sirva. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

beall tool use ·
By: sistermaide
February 21, 2014 · 635 views

How I use the beal tap to make face plates for my lathe. This facilitates making multiple turnings, with multiple operations, and keep them perfectly centered, between times. Created using Serif MoviePlus

 

The Sanding Wonder ·
By: Vinces WoodNWonders
February 17, 2014 · 4,144 views

The Sanding Wonder is a unique articulated head sander that offers you the best in sanding possibilities!

 

Turning the Colwin Way ...Long Hole Boring ·
By: Axminster Tools & Machinery
January 31, 2014 · 22,470 views

What would you do if you needed to create items such as legs or standard lamps which are longer than your lathe. This demonstration of the Axminster Long Hole Boring system and how to use it for joining shows you how simple it can be.

 

hollowing tools "Hollowing King's Caliper and Blades" ·
By: Paul Crabtree
January 29, 2014 · 1,141 views

Hollowing tools. To give more insight as to how better to use the 'Hollowing King' hollowing tool. http://toolsbycrabtree.com

 

Woodlathe Banjo Lamp ·
By: Cip's Wood Chips
January 25, 2014 · 1,759 views

A banjo lathe lamp is attached to the tool rest banjo. It help illuminate your work. When you are finished turning, it is easy to push the banjo and the lamp out of the way. I already made one and needed a second lamp.

 

Hope Woodturning Pro Sander ·
By: Andy Coates RPT
January 06, 2014 · 2,559 views

Short video made for Hope Woodturning on the Hope Pro Sander for Woodturners

 

Hope Woodturning Sanding Arbor Kit ·
By: Andy Coates RPT
January 06, 2014 · 5,509 views

Short video made for Hope Woodturning on using the Sanding Arbor Kit

 

Hope Woodturning Sanding Arbor Kit ·
By: Simon Hope
January 06, 2014 · 3,216 views

Using the Hope Woodturning Sanding Arbor Kit

 

Hope Woodturning Pro Sander ·
By: Simon Hope
January 06, 2014 · 5,004 views

How to use the Hope Woodturning Pro Sander

 

Morse taper tool use on the lathe ·
By: SegmentedTurner
December 23, 2013 · 11,762 views

The Morse taper in your tailstock is handy, but it must be used properly. I show some details that will keep you out of trouble and help you solve problems that can arise.

 

Lathe Disk Sander ·
By: woodturningwithtim1
October 22, 2013 · 15,549 views

You can make a disk sander for your lathe with just a faceplate and a piece of scrap of particle board.

 

General 25 036 Wood Lathe Duplicator ·
By: Ron Calverley
October 02, 2013 · 22,176 views

The cutting tool on this lathe duplicator could not be retracted smoothly into the turning piece. Easy Fix!!!

 

Creating Custom Sanding Disk Holder ·
By: Woodturners of Southwest Missouri
October 01, 2013 · 94,663 views

In this demonstration, Bob Bezanson of the Woodturners of SW MO shows how he makes his own Sanding Disk Holders. He also shares all of the sources for the supplies to make them. This PDF is available from at www.woodturnersofswmo.org for download.

 

Giant Sanding Disc Offers Options For Woodturning ·
By: As Wood Turns
September 27, 2013 · 5,315 views

http://www.AsWoodTurns.com After seeing a large sanding disc at Dale Larson's shop here in the Portland area, I decided to get one for myself. They're not available commercially except as a very expensive stationary tool. So, I decided to make my own. I ordered a piece of 1/4' thick aluminum 20.25' square allowing a little bit for truing the shape. This is the maximum that can fit on my Powermatic 3520 lathe. This aluminum came from http://www.discountsteel.com/ for about 62. The aluminum plate is bolted to an 8' steel faceplate. Howard Borer, a member of Cascade Woodturners, made the facep

 

PVC Wood Lathe Tool Holder ·
By: RealRuler2112
July 22, 2013 · 5,961 views

Short video showing my PVC pipe wood lathe tool holder with an open base to prevent shaving build-up, as requested by Carl.

 

Sandpaper Cutter Project ·
By: woodturningwithtim1
July 21, 2013 · 13,982 views

Everyone has been bugging Tim to show how to make the sandpaper cutter he uses in his shop. You had better enjoy this one as it involved a lot of math...well a lot of math for someone like Tim... As promised in the video, here are the dimensions and the parts list for the project. One 1/4' thick 11' x 7 1/2' board One 10 1/2' 18tpi hacksaw blade Two #5 machine screws Two lock washers Two #1/4 washers (the washer is a little over 1/2' in diameter and 1/16' thick)

 

Lathe Buffer Wheel ·
By: Cip's Wood Chips
July 10, 2013 · 3,574 views

I made a mesquite nature bowl. As it dryed it started to show small cracks, so I gave it a coat of tung oil. The cracks stopped but the finish was dull and foggy. I decided to build my own wheel buffer that I could power on my lathe using my Nova chuck.

 

Clean Up Time For Your Lathe's Morse Taper ·
By: As Wood Turns
June 21, 2013 · 4,985 views

http://www.AsWoodTurns.com On my lathe, I don't think about cleaning the inside of the spindle or tail stock, but I should. Gunk can build up in the morse taper of these areas and throw off how well your drive and tail centers seat, center, and hold your work. The gunk can also cause damage to these tools. But cleaning the morse taper is difficult. It's a small area - I cannot use a steel brush as it will eventually damage the morse taper. However, I saw a tip in American Woodturner that helps a lot -- use a #20 shotgun cleaning brush. The brush ( 2- 3) itself does not have a handle but I'm a woodturner, I can make one out of a pen blank. That is what I did. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

TaperMate Morse Taper Cleaner ·
By: Craft Supplies USA
March 27, 2013 · 5,743 views

Properly maintain your lathe with the TaperMate Morse Taper Cleaner. Buy now: https://www.woodturnerscatalog.com/p/90/3651/TaperMate-Morse-Taper-Cleaner?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA When dust, oil, wax or other materials build up inside of the morse taper in your lathe spindle, centers and drill chucks are unable to seat properly, which is likely to cause permanent damage to your expensive lathe spindle rendering it incapable of holding morse taper centers. With the TaperMate M

 

SPHERE CUTTER ·
By: VERMEC Engineering Australia
March 14, 2013 · 97,190 views

 

Easy Lathe Tailstock Lift Prevents Backstrain ·
By: As Wood Turns
February 23, 2013 · 8,946 views

http://www.AsWoodTurns.com The tailstock on my full-sized Powermatic 3520A is heavy. I have to remove it from the lathe to hollow a bowl or a hollow form. It's so heavy that I worry about dropping in on my toes or straining my back. If I leave it on the lathe, I risk banging an elbow. Ouch!. It was time to fix this 'Health & Safety' issue. I searched for solutions including commercial solutions. They're nice but expensive. A fellow woodturning club member used an electric lathe. Another viewer made a hinge to swing his tail stock off to the side. I needed it clear out of harm's way. I purchase

 

Flatland Woodturners Presents Harold Mattis demonstrating How to Make Sanding Disks ·
By: Flatland Woodturners
January 22, 2013 · 1,247 views

Club Member, Harold Mattis, demonstrates how to make your own Sanding Disks.

 

Choosing Sandpaper ·
By: woodturningwithtim1
January 16, 2013 · 13,045 views

Sandpaper is something that no woodturner can do without. Tim provides some helpful tips to choose the right kind.

 

Making your own Sanding Pads ·
By: DentonTurners
January 15, 2013 · 15,997 views

This is in response to a request to extract the section of our Gadgets, Gizmos, and Gimmicks video pertaining to making your own sanding pads. I also enhanced the audio level as much as I could. For the stem of the sanding pad, he uses extra long screw driver bits that he purchased at Harbor Freight. They can be glued into a 7mm hole drilled in the wooden block at the base of each sanding pad. Enjoy!!

 

GelPro NewLife Eco-Pro Anti-Fatigue Work Mat ·
By: Craft Supplies USA
December 04, 2012 · 4,864 views

Eliminate the fatigue caused by standing on hard surfaces with GelPro Anti-Fatigue work mats. Buy now: https://www.woodturnerscatalog.com/p/90/5672/GelPro-NewLife-Eco-Pro-Anti-Fatigue-Work-Mat?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA 'A small price to pay for how good I feel after a day at the lathe.' - MIke Mahoney This could be the last work mat you'll ever buy! Designed to provide the perfect balance of comfort and support, GelPro NewLife Eco-Pro Anti-Fatigue Work Mats feature propriet

 

SPINDLE LOCK add-on for P-Matic 3520B Lathe ·
By: WYOMINGWOODTURNER
December 04, 2012 · 4,540 views

Sam adds a custom spindle lock made from a hinge to his powermatic wood lathe.

 

IX Collets 1 ·
By: J.R. Beall
December 04, 2012 · 10,996 views

Internal collets for wood turners

 

Shop-built outboard Wood Lathe tool rest ·
By: WYOMINGWOODTURNER
October 28, 2012 · 32,026 views

Sam Angelo shows details of a shop-built, 'outboard' tool rest. With the headstock of his lathe moved to the front of the bed ways, Sam is able to turn pieces larger than the 20 inch swing of his lathe.

 

Calipers and Dividers ·
By: woodturningwithtim1
August 09, 2012 · 10,799 views

For most woodturnings 'close enough' is fine, but Tim shows you a nice set of tools that can help you hit exact measurements.

 

VERMEC Ultimate Deep Hollowing and Sanding System ·
By: VERMEC Engineering Australia
July 24, 2012 · 7,251 views

This is a brief video of Expert Woodturner Guilio Marcolongo using the Vermec Ultimate Deep Hollowing System. He also quickly demonstrates the Ultimate Sanding Head. Check out Vermecs other products at www.vermec.com

 

A Portable Cart for Woodturning Tools ·
By: Jake Gevorgian
June 27, 2012 · 7,316 views

Plans for a tool cart are available by http://www.montana-designs.com

 

Sandpaper Cutter ·
By: woodturningwithtim1
June 14, 2012 · 7,229 views

Ever wonder where Tim gets those neat little pieces of sandpaper? In this clip he shows you how to make and use your own sandpaper cutter.

 

Raptor Set Up Tools ·
By: Craft Supplies USA
May 31, 2012 · 30,606 views

Raptor Set Up Tools simplify the sharpening process making it fast and easy. Learn more: https://www.woodturnerscatalog.com/p/95/5188/Raptor-Set-Up-Tool?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Frustrated and confused by the instructions supplied with your sharpening system? You're not alone, many woodturners are. We think using your sharpening system should be simple. In fact, we believe that setting up to sharpen should be a 'no-brainer' that takes only seconds while resulting in consiste

 

Magnifying glass for lathe woodturning ·
By: Jacques Fortin
May 07, 2012 · 549 views

Magnifying glass for lathe woodturning

 

Crystal Key Keeper (woodturning project) ·
By: Craft Supplies USA
April 18, 2012 · 2,419 views

The Crystal Key Keeper is a fun and functional turning project she's sure to love. Buy now: https://www.woodturnerscatalog.com/p/58/5294/Apprentice-Crystal-Key-Keeper-Kit?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA This inexpensive accessory is a perfect project for beginner and budget-minded woodturners. The Crystal Key Keeper keeps your keys within easy reach at all times. Just hang it on the lip of a purse or pocket for easy access. Use a combination of wood, stone, colors or decorative tech

 

NOVA Live Centre System ·
By: Teknatool NOVA
April 16, 2012 · 866 views

For more information, please follow the link below. http://www.teknatool.com/products/Lathe_Accessories/Centres/nlc.htm Like us on Facebook: http://www.facebook.com/NOVAwoodworking Follow us on Twitter: http://twitter.com/#!/novawoodworking

 

Tompkins Gauge in action ·
By: Drechselstube
April 06, 2012 · 2,224 views

 

NOVA DVR Wireless Lathe Remote (3) ·
By: Teknatool NOVA
April 03, 2012 · 863 views

Kevin Hodder from the North Shore Guild in Auckland, NZ shows how easy it is to use the DVR Wireless Lathe Remote (55518) when turning big pieces.

 

NOVA DVR Wireless Lathe Remote (2) ·
By: Teknatool NOVA
April 03, 2012 · 633 views

Kevin Hodder from North Shore Guild in Auckland, NZ, is using the NOVA DVR Wireless Lathe Remote to assist with a deep boring project using a Shell Auger.

 

NOVA DVR Wireless Lathe Remote (1) ·
By: Teknatool NOVA
April 03, 2012 · 1,324 views

Kevin Hodder from the North Shore Guild in Auckland NZ, turning a long spindle piece using the DVR Wireless Lathe Remote Accessory (55518) This comes standard with every NOVA DVR 2024 Lathe and is available as an accessory for all NOVA DVR lathes (some older models may require Retro Fit Kit 55519 additionally) Like us on Facebook - https://www.facebook.com/NOVAwoodworking

 

Lathe Indexer.wmv ·
By: Doug Keown
March 16, 2012 · 363 views

Wood lathe indexer made with a stepper motor. Go to billooms.com his site has all the information about how to make one for your lathe.

 

Foredom® Flex Shaft Motors (power tools and accessories) ·
By: Craft Supplies USA
March 07, 2012 · 154,466 views

Take your carving skills to the next level with Foredom Products and accessories. Learn more: https://www.woodturnerscatalog.com/p/125/4859/Foredom-1-3-HP-TX-Series-Flex-Shaft-Motor?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA The Foredom Flex Shaft Motors offers the power, versatility, and durability you need for grinding, carving, sanding, finishing, and polishing any woodturning or carving. Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodturning tools and

 

Rak for wood chisel ·
By: Jacques Fortin
January 16, 2012 · 2,113 views

Wood turning lathe rak for chisel

 

Woodturning My New Delta 46-460 Lathe ·
By: Carl Jacobson
December 29, 2011 · 49,666 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. I got a new Delta 46-460 for Christmas. I'm very happy It's so nice and quiet very smooth running machine. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Jet 22-44 OSC Oscillating Drum Sander ·
By: Axminster Tools & Machinery
December 22, 2011 · 2,705 views

This is the largest of the Jet open-ended drum sanders and has, when used from both sides, an incredible 1,120mm of capacity with an 100mm capacity under the abrasive drum. The drum is specially balanced to reduce vibration to a minimum and has adjustments so that the drum and sander table can be set perfectly parallel to each other. The oscillating action guarantees a smooth surface and prolongs the life of the sanding belts. The variable speed feed motor drives the timber through from 3m/min down to virtual stop so that a good finish can be obtained even on the most difficult pieces of grain

 

Fein MSF636-1 Eccentric Sander ·
By: Axminster Tools & Machinery
December 21, 2011 · 958 views

This has to be one of the most robust and efficient eccentric sanders on the market today. Delivering a large eccentric stroke of 8.4mm it has a high waste removal that will also create a very clean smooth surface making the best finish for applying a high quality paint coating to wood and fibreglass. Designed with boat builders in mind, it will give a flawless finish every time. The machine has a metal drive head and a slimline motor body for comfortable working; eight suction holes inside the backing pad give peripheral extraction around the head of the sander ensuring dust is moved through away from the sanding surface and into a connected extractor. Supplied with eccentric sanding head 150mm, medium backing pad and protective hood. BUY ONLINE NOW... http://www.axminster.co.uk/fein-fein-msf636-1-eccentric-sander-prod804388 Axminster Tool Centre Freephone 0800 371822

 

Jet 31A Combination Belt & Disc Sander ·
By: Axminster Tools & Machinery
December 21, 2011 · 6,154 views

This is a heavy duty, floor standing belt disc sander made from high grade cast iron on a substantial pressed steel stand. The finely ground cast iron tables adjust easily, never leaving any gap between the table and the abrasive that can grab the work or make the machine unsafe for use. The disc sander has a T-slotted mitre fence for added safety and greater accuracy with the table tilting from 15 in one direction to 45 in the other. The sturdy cabinet base incorporates the on/off switch and the 100mm single dust extraction outlet. The addition of the 708118 mobile base will allow the machi

 

Jet 16-32 Plus Drum Sander ·
By: Axminster Tools & Machinery
December 21, 2011 · 9,836 views

This is a medium capacity drum sander which will finish boards up to 810mm wide (in two passes) by 75mm thick. The extruded aluminium drum is precision machined and balanced for minimum vibration. Used with care the machine can achieve a thickness tolerance of 0.25mm across the full width of the drum and the combination of variable speed conveyor belt drive and a fine abrasive can result in a really first class finish, even with the most difficult of timbers. The abrasive loading is wound spirally around the drum and held in position with spring loaded clips, both secure and easy to change. Th

 

Trying out Google SketchUp for Woodturning Ideas ·
By: Jake Gevorgian
December 08, 2011 · 4,282 views

I wish I was good at making tutorials. I would explain how all this happens. But, really, if you try SketchUp, it's very easy to learn...and you can do these things very quickly. SketchUp is free (and there is a Pro version of it, which, I believe is 500 bucks) and it's available on Google. Just search for it.

 

Lift Lock and Roll (woodturning lathe roller system) ·
By: Craft Supplies USA
August 25, 2011 · 32,198 views

Move your lathe quickly and easily with the Lift Lock and Roll. Buy now: https://www.woodturnerscatalog.com/p/110/4697/Lift-Lock-and-Roll-Lathe-Mobility-System?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Need more room in your wood shop? With the Lift Lock & Roll roller system, you can quickly and safely roll your lathe out of the way for storing freeing up valuable floor space. Just slide the roller into place and clamp to the lathe stand. Not only can you leave the Lift Lock and Roll system

 

Digital Dial Calipers ·
By: PeachtreeWoodworks
July 12, 2011 · 9,528 views

Digital Calipers are not your typical measuring device.

 

Woodturners Smock by Craft Supplies USA ·
By: Craft Supplies USA
May 27, 2011 · 11,853 views

Take an in-depth look at our woodturners smock! Buy now: https://www.woodturnerscatalog.com/p/89/4554/Craft-Supplies-USA-Woodturners-Smock?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Designed in-house by our team of professionals, the Woodturner's Smock is made to work with you. Every detail of this smock has been carefully tested and scrutinized that you can enjoy the very best in comfort and function. We guarantee this smock will quickly become your favorite woodturning accessory! MultiCa

 

Center-Set Post Lock (woodturning accessory) ·
By: Craft Supplies USA
May 12, 2011 · 8,484 views

lock your tool rest post height with the Center-Set Post Lock. Buy now: https://www.woodturnerscatalog.com/p/111/6122/Turners-Select-Center-Set-Post-Lock-2-Pack?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA A must have for every woodturner who does texturing or uses other woodturning tools that require cutting on center, the Center-Set Post Lock device lets you lock your tool rest post at the desired position while allowing you to rotate it side to side as needed. Simply slide lock onto the tool

 

Oneway banjo on Nova lathe ·
By: Bob Hamilton
January 23, 2011 · 10,691 views

In response to quite a few questions about my use of the Oneway banjo on my Nova DVR lathe I put together this video, hopefully explaining most of the reasons and problems encountered.

 

Follow block ·
By: Bob Hamilton
January 18, 2011 · 4,795 views

This video describes how I made a follow block to mount on the tail center of my lathe. I apologize for the sound quality but I have not been able to figure out how to get rid of the 'Max Headroom' stutter that crops up occasionally. My video editing software 'upgrade' seems to be causing more problems than it cured.

 

Tompkins Gage'T (woodturning thickness caliper) ·
By: Craft Supplies USA
January 07, 2011 · 7,534 views

In this woodturning video, measure the wall thickness of woodturning projects with the Tompkins Gage'T. Buy now: https://www.woodturnerscatalog.com/p/87/3730/Tompkins-Gage%27T-Thickness-Gauge?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Designed to measure the wall thickness of bowls up to 20' in diameter, this handy thickness gauge is also ideal for checking platters too. The Gage'T frame is made from durable glass-filled nylon and features a spring-loaded measuring rod with etched thickness sc

 

T-Rexâ„¢ Tool Caddy (woodturning lathe accessory) ·
By: Craft Supplies USA
November 17, 2010 · 12,196 views

Organize your woodturning tools with the T-Rex Tool Caddy. Buy now: https://www.woodturnerscatalog.com/p/110/5520/T-Rex-Standard-Tool-Caddy?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Finally, a practical and economical way to keep all your tools and lathes accessories in one convenient and easy to reach place! Attach the T-Rex Tool Caddy to your lathe bed and keep everything you need right where you need it. Imagine the joy of turning without the headache of misplacing tools or searching thr

 

phi-calipers.avi ·
By: Cap'n Eddie Castelin
October 14, 2010 · 21,596 views

How to make a set of calipers to assist you in determining the golden Mean in your work.

 

Woodturning with the Galbert Caliper (spindle sizing caliper) ·
By: Craft Supplies USA
August 30, 2010 · 8,535 views

In this woodturning tutorial, we'll show you how to size your spindle work with the Galbert Caliper. Buy now: https://www.woodturnerscatalog.com/p/86/4483/Galbert-Turning-Caliper?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA The Galbert turning caliper makes sizing spindle work a breeze. Unlike traditional calipers that require you to stop and start your lathe frequently to check for size, the Galbert caliper allows you to quickly and accurately check for size while cutting. Able to size work

 

Mike Mahoney on the McNaughton Center Saver (woodturning DVD preview) ·
By: Craft Supplies USA
March 12, 2010 · 25,200 views

A preview of Mike Mahoney's woodturning video 'McNaughton Center Saver'. Buy now: https://www.woodturnerscatalog.com/p/99/2478/Bowlmaker-Inc-Mike-Mahoney-on-the-McNaughton-Center-Saver-Revised-Edition-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Revised Edition Being able to cut multiple bowls from a single wood blank offers numerous advantages including increased profitability, lower cost per bowl and is an environmentally sound approach to woodturning. Professional woodturner and instruct

 

Jet 22-44 OSC Oscillating Drum Sander ·
By: Axminster Tools & Machinery
November 11, 2009 · 53,413 views

This is the largest of the open-ended drum sanders and has, when used from both sides, a incredible 1,120mm of capacity with a 100mm capacity under the abrasive drum. The drum is specially balanced to reduce vibration to a minimum and has adjustments so that the drum and sander table can be set perfectly parallel to each other. The oscillating action guarantees a smooth surface and prolongs the life of the sanding belts. The variable speed feed motor drives the timber through from 3m/min down to virtual stop so that a good finish can be obtained even on the most difficult pieces of grained tim

 

How to use the Raptor Setup Tools ·
By: Craft Supplies USA
May 01, 2009 · 34,695 views

Sharpen your woodturning tools quickly and easily with Raptor Setup Tools. Buy now: https://www.woodturnerscatalog.com/p/95/5188/Raptor-Set-Up-Tool?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Frustrated and confused by the instructions supplied with your sharpening system? You're not alone, many woodturners are. We think using your sharpening system should be simple. In fact, we believe that setting up to sharpen should be a 'no-brainer' that takes only seconds while resulting in consistent, re

 

Spindle Tap How To Part 2 You Tube ·
By: J.R. Beall
April 17, 2009 · 24,563 views

The Beall Tool Co. Spindle Tap demo part 2

 

Spindle Tap How To Part 1 You Tube ·
By: J.R. Beall
April 15, 2009 · 32,270 views

The Beall Tool Co. Spindle Tap demo part 1

 

Wood Threader How To Part 2 You Tube ·
By: J.R. Beall
April 15, 2009 · 104,150 views

The Beall Tool Company Wood Threader demo part 2

 

Wood Threader How To Part 1 You Tube ·
By: J.R. Beall
April 15, 2009 · 228,402 views

The Beall Tool Company Wood Threader demo part 1

 

Pen Wizard Reversed ·
By: J.R. Beall
February 07, 2009 · 25,417 views

Reversing the Pen Wizard to work from its other side and turning a medium spiral on a taper with the depth guide, showing the gearbox set-up.

 

polygonal pens on the Pen Wizard ·
By: J.R. Beall
February 05, 2009 · 24,969 views

A better way to make pens with 6, 8, 12 or 24 flats using the Dremel and the Pen Wizard

 

The Beall Wood Buff ·
By: J.R. Beall
November 25, 2008 · 17,684 views

How the buffing system works and what it will do.

 

Calibrating the Galbert Caliper ·
By: Peter Galbert
April 23, 2008 · 5,711 views

instruction on calibrating the Galbert Caliper for accurate measuring

 

The Galbert Caliper ·
By: Peter Galbert
April 11, 2008 · 34,894 views

An introduction to the function of the Galbert Caliper direct reading caliper for woodturning

 

A video guide of the Robert Sorby Sandmaster ·
By: Robert Sorby
February 15, 2008 · 23,732 views

A video guide of the Robert Sorby Sandmaster (410) The Sandmaster is used in conjunction with a lathe to put a fine finish on turned pieces. It eliminates the unsightly lines often associated with traditional hand sanding. As the disc is spinning it also reduces the clogging of the abrasive.

 

Stubby tailstock lift #2 @ www.turnedoutright.com ·
By: Don Kleinschnitz
January 09, 2008 · 2,648 views

Magically stowing the stubby tail stock

 

Stubby tailstock lift #1 @ www.turnedoutright.com ·
By: Don Kleinschnitz
January 09, 2008 · 3,982 views

Magically lifting the tail stock www.turnedoutright.com

 

Return to Turning Videos

Great Bargains


Heavy Duty Live Center

On Sale for only $16.53

List Price: $19.95

Click here for more information or to purchase

 


Dremel Rotary Tool Kit

On Sale for only $139.00

Save $60.99 (30%)

List price: $199.99

Click here for more information or to purchase


Roller Stand

On Sale for only $23.79

Save $6.11 (20%)

List Price: $29.90

Click here for more information or to purchase

 


Easy Wood Tools - Easy Start Rougher + Finisher + Detailer

On Sale for only $159.99

List price: $206.97

These tools have the smaller 9" maple handle and are 12.5" overall.

Click here for more information or to purchase


NOVA 48232 G3 Reversible Wood Turning Chuck

On Sale for only $99.00

Save $60.99 (38%)

List price: $159.99

Click here for more information or to purchase

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Sheffield Woodturning
Saburrtooth
The Studios' of Bradley R.M.

(Click any Ad to go to our Sponsor's Website)