Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Turning Chisels and Tools Videos (224)

Sort by

Or click here to: Search All Videos


How to Glue the Quick Release Unit into Tool Handle
By: jimmy clewes
August 02, 2018 · 423 views

 

New Turning tool
By: Donny Lawson
August 02, 2018 · 21 views

Doug Thompson 1 1/4' negative rake scraper with 16' handle.

 

Easy Wood Tools Unboxing
By: Yuval Lahav Woodturning
August 01, 2018 · 2,077 views

Unboxing of my newly won easy wood tools, and addressing the carbide vs. traditional tools Facebook debate. My friend Chris Channel - https://www.youtube.com/user/customchevy03 Patreon: https://www.patreon.com/YuvalLahav Twitter: https://twitter.com/YL_Woodturning Instagram: https://www.instagram.com/yuval_lahav_woodturning/ Facebook: https://www.facebook.com/yuval.lahav.16 Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Reddit: https://www.reddit.com/user/aforeignitalian/ Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!

 

La Gubia Devastadora (Roughing Gouge)
By: Asociación Torneros de Madera PR
July 29, 2018 · 25 views

Nuestros torneros experimentados comparten su conocimiento, y en esta ocasión nos hablan de básico de la gubia devastadora. Pueden colocar sus opiniones en los encasillados de comentarios.

 

Woodturning - How To Reshape a Gouge to a Fingernail Grind
By: Mike Waldt
July 11, 2018 · 5,721 views

In this video I show my method of reshaping a gouge with a straight over grind, to on with a fingernail grind and swept back wings. Simon Hope: http://www.hopewoodturning.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Easy Wood Tools: http://www.easywoodtools.com/ Easy Wood Tools at Amazon UK: https://www.amazon.co.uk/Easy-Wood-Tools-Chuck-M33-3-5/dp/B07664VKFB/ref lp_8318174031_1_13?srs 8318174031&ie UTF8&qid 1529428204&sr 8-13 UKIWS Facebook : https://www.facebook.com/ukiws/ Website: http://www.ukiws.co.uk

 

Robert Sorby Basket weave illusion tool set
By: Robert Sorby
June 11, 2018 · 1,149 views

Robert Sorby Basket weave illusion tool set

 

Robert Sorby 67HS Six piece woodworking tool set 2018
By: Robert Sorby
June 11, 2018 · 740 views

Robert Sorby 67HS Six piece woodworking tool set

 

Turning a Bowl Scraper into a Negative Rake Scraper-A Short Demo
By: Woodturning Arts
June 03, 2018 · 1,559 views

Like/Share/Comment/Subscribe and Thanks for Watching! Important Links: About This Channel: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/about?view_as subscriber Channel Discussion Page: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/discussion?view_as subscriber My Playlists: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/playlists?view_as subscriber Audio Information Track #1 Patent Doll by Freedom Trail Studio Track #2 Way Out West by Twin Musicom You’re free to use this song in any of your videos, but you must include the following in your video description: Way Out West by Twin Musicom is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://www.twinmusicom.org

 

Tool selection for Cross-grain Work woodturning with Sam Angelo
By: WYOMINGWOODTURNER
May 20, 2018 · 4,743 views

Sam shows his favorite tools used for turning cross-grain work like a bowl or a lidded box. This is a 'sister' video to tool selection for turning spindles. (Link below) Tool selection for turning spindles-video link https://goo.gl/9TzgHR Please find my work for sale on these sites: www.wyomingwoodturner.com www.samangelo.com https://www.etsy.com/shop/wyomingwoodturnercom

 

Querholzschalenboden mit Ringmesser drehen
By: johann340
May 13, 2018 · 385 views

Drechslerkurse mit Johann Deutsch

 

Robust Tool Handle Collet System
By: Brent English
May 12, 2018 · 483 views

Robust tool handles use industrial ER series collets to hold your round shank gouges and chisels for woodturning.

 

spindle gouge face off
By: Al Hockenbery
May 05, 2018 · 60 views

facing off a spindle with a spindle gouge

 

Developing tools in house - An overview of the process
By: Axminster Tools & Machinery
May 04, 2018 · 2,172 views

We have a passion for high quality, unique products that have a universal worldwide appeal. Our brand UJK pushes the boundaries of manufacturing excellence that has yet to be seen in woodworking. For more info: https://knowledge.axminster.co.uk/parf-super-dog-story/ ---------------------------------------------------------------------------------------------- SHOP - http://www.axminster.co.uk BLOG - http://knowledge.axminster.co.uk/ FACEBOOK - https://www.facebook.com/axminstertoolcentre EBAY STORE - http://stores.ebay.co.uk/axminstertoolcentre CALL (UK) - 0800 371822

 

Hunter Viceroy tool
By: John C Lucas Woodturner
April 16, 2018 · 1,059 views

this is a video on how to use the Hunter Viceroy carbide wood turning tools.

 

Hunter #5 Badger
By: John C Lucas Woodturner
April 09, 2018 · 447 views

Using a Hunter #5 to undercut the lip on bowls

 

NOVA Smart Chisel Handle
By: NOVA Woodworking
April 09, 2018 · 542 views

FEATURES AND BENEFITS - Wireless control at your fingertips for stop, start and speed adjustments. - LED inspection light to inspect your work - Change up the brightness of your LED light to suit your personal requirements with a simple press and hold of the button for 12 seconds. - Invaluable for long spindle work, or large platters/bowls when you can’t come close to the headstock - Saves time – easy speed controls from the chisel handle - Rubberized handle for comfortable turning from the hip - Good weight for tool steadiness and vibration dampening – especially with larger work but improves turning on any work - USB Li-ion re-chargeable battery - LED will start to flash when battery is life is lower than 20% to alert you to recharge. https://www.teknatool.com/product/nova-smart-chisel-handle-beta-release

 

Hook Tool from Woodturning Tool Store
By: Tod Raines
April 07, 2018 · 2,386 views

Produced by Tod Raines of Woodturning Tool Store on April 7, 2018 The Woodturning Tool Store is proud to introduce the Hook Tool by Michael Hosaluk. This tool is available at the Woodturning Tool Store or from Michael Hosaluk during his demos and classes. This video introduces the Hook Tool, how to sharpen and use it turning a small oak cup. Visit Woodturning Tool Store https://woodturningtoolstore.com Social media links Facebook: https://www.facebook.com/woodturningtoolstore Google : https://plus.google.com/ TodRaines Instagram: https://www.instagram.com/traines64

 

Tool Review for Jamieson torque aresting handle
By: Lyle Jamieson
April 03, 2018 · 546 views

This is the heart of my hollowing system. The handle supports the cutting action and prevents catches or twisting and torqueing forces. This allows the fingertip control I want for easy, accurate, and safe hollowing. Please see my website for all the resources and tool store. Every tool listed has more information details. See not only the right tools but tips and techniques on how to use them. I have archived my articles written for publications and each of my newsletter broadcasts have all the Q&As listed by topic and indexed table of contents. Don't forget to subscribe here for the YouTube videos. Please support my sponsors Mike Hunter tools and Doug Thompson tools. https://lylejamieson.com

 

TurnMaster Hints and Tips 2018
By: Robert Sorby
March 19, 2018 · 4,179 views

The Robert Sorby Turnmaster is a unique tool. It combines a standard scraper with a tool that can shear scrape, some like to call this shear cutting as the cutter is slicing through the wood. It can be used on spindle projects as well as bowl or faceplate projects. It is available with a wooden handle….. or as a blade only to fit into an interchangeable handle system, such as the Robert Sorby Sovereign.

 

Robert Sorby Turnmaster Hints and tips 2018
By: Robert Sorby
March 13, 2018 · 757 views

The Robert Sorby Turnmaster is a unique tool. It combines a standard scraper with a tool that can shear scrape, some like to call this shear cutting as the cutter is slicing through the wood. 03: It can be used on spindle projects as well as bowl or faceplate projects. It is available with a wooden handle….. or as a blade only to fit into an interchangeable handle system, such as the Robert Sorby Sovereign.

 

New Tool Test
By: Will Coffman
March 03, 2018 · 8 views

 

Gyűrűs kès próbája
By: Szabó János
February 21, 2018 · 155 views

Régóta szemezgetek a gyűrűs késsel, most jött el a pillant hogy megvegyem, szerintem jó barátok leszünk

 

Robert Sorby SpindleMaster
By: Michael Roper
February 20, 2018 · 72 views

The Robert Sorby Spindlemaster cutting this Bubinga like a hot knife through butter.

 

Hope Deluxe Handles & Double Ended Tools, Makers Central, UKIWS plus some stickers!
By: Mike Waldt
February 14, 2018 · 8,249 views

I give an overview of the Simon Hope De Luxe Grub Screw Handles and Double Ended Turning Tools plus news on Makers Central and UKIWS 2018. Gord Rock: https://www.youtube.com/results?search_query gord rock Ray Zimmer: https://www.facebook.com/ray.z.koch Simon Hope: http://www.hopewoodturning.co.uk/ Paul Hadley: https://www.ebay.co.uk/itm/112792117841?ssPageName STRK:MESELX:IT&_trksid p3984.m1555.l2649 Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ UKIWS Facebook : https://www.facebook.com/ukiws/ Website: http://www.ukiws.co.uk/ Makers Central YouTube Channel: https://www.youtube.com/channel/UCJSreLjUhGr927JMvtRIKXA Makers Central website: http://www.makerscentral.co.uk/ NZ Woodturning: https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA

 

How Many Woodturning Chisels Do You Need
By: Turntastic Wood Designs
February 14, 2018 · 379 views

My collection of woodturning chisels and how and when I use them.

 

Specialty Scrapers for the Wood Lathe
By: Mike Peace Woodturning
January 26, 2018 · 2,913 views

I demonstrate the usefulness of different specialty scrapers for special woodturning tasks I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Woodcut Mini Cam Loc Handle & Gauge - Product Overview
By: Axminster Tools & Machinery
January 26, 2018 · 3,431 views

This Woodcut Cam-Loc mini tool set comprises a Cam-Loc handle and all 10 mini tools in one complete package. Perfect for smaller wood projects such as pen turning, the handle, turned from high-grade aluminium, has an ergonomic design that fits comfortably in the palm of your hand. Additional knurling at the top and bottom provide a little extra grip. It is 240mm long with a quick-change Cam-Loc head that accommodates 6mm shanks. The grip is solid, requiring only a 1/4 turn of the locking nut. Its unique design enables you change chisels in the blink of an eye. The handle is hollow and can sto

 

GOUGE... Quick-release long/short handle
By: CL Woodturning
January 07, 2018 · 106 views

African Blackwood... omgg...

 

1803 - Homemade Gouges
By: RealRuler2112
January 07, 2018 · 89 views

A description and discussion of the homemade bowl gouges I made using a mill, some tool steel, and knowledge. They are made out of O1 tool steel (drill rod) with turned handles and work awesome. This is 1/2' drill rod & I bought it from my local Fastenal. https://www.fastenal.com/products/details/47774

 

QUICK-RELEASE 3 TOOL SET
By: CL Woodturning
January 05, 2018 · 84 views

Final video (probably) on my quick release tool idea...all comments more then welcome. Thanks for following progress so far. I bought the brass joints from here: https://rover.ebay.com/rover/0/0/0?mpre https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F182451449528 Search for Quick Release Pool Snooker Que Joints

 

QUICK-RELEASE GOUGE EXAMPLE
By: CL Woodturning
January 04, 2018 · 141 views

Two length handle options...

 

Wood turning-Comparing and testing Negative rake scraper with my own sharpen scraper
By: CraftWithAfshin
December 24, 2017 · 604 views

Hi everyone, in this video im comparing and testing a negative rake scraper with a scraper that i sharpen to the degree i feel is most effective and i go in details showing them both how effective they are and which one is best for what job. However this is only from my own experience over a year and you should test and see if it works for you or not .

 

turning tools carbide and oland
By: earl's small segment shop
December 07, 2017 · 648 views

Carbide and oland turning tools

 

MICRO Tools from Easy Wood Tools for Christmas!
By: EasyWoodTools
November 17, 2017 · 673 views

The 3-Piece MICRO Tool Set from Easy Wood Tools makes the perfect stocking stuffer!

 

EASYWOOD TOOLS ! WW#33
By: Nick Zammeti
November 01, 2017 · 5,545 views

MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ LE MOSS https://www.youtube.com/channel/UCvvpsDnPApar2oaBDHfS1FA JMAKES https://www.youtube.com/channel/UCc-yMIeFtYIKehWFe15k8nQ SAM FOWLER https://www.youtube.c

 

Jimmy Clewes Mate Tools and handle accessories available at Woodturning Tool Store
By: Tod Raines
October 01, 2017 · 765 views

Produced by Tod Raines of Woodturning Tool Store on Oct 1, 2017 Here I go through the set of Jimmy Clewes Mate tools. Get a closer look at the series of Mate tools and the tool shank adapters as well as the Quick Release handle inserts. Visit Woodturning Tool Store https://woodturningtoolstore.com Social media links Facebook: https://www.facebook.com/woodturningtoolstore Google : https://plus.google.com/ TodRaines Instagram: https://www.instagram.com/traines64

 

Overview of Carter and Son Toolworks turning tools available at Woodturning Tool Store
By: Tod Raines
October 01, 2017 · 724 views

Produced by Tod Raines of Woodturning Tool Store on ... Oct 1, 2017 This video shows a quick overview of Carter and Son Toolworks turning tools available from Woodturning Tool Store. Visit Woodturning Tool Store https://woodturningtoolstore.com Social media links Facebook: https://www.facebook.com/woodturningtoolstore Google : https://plus.google.com/ TodRaines Instagram: https://www.instagram.com/traines64

 

Refurbishing Wood Turning Tools
By: SP Wood Art
September 24, 2017 · 4,923 views

This video shows some of the techniques that I use to refurbish wood turning tools and save money in the process. I also make a jig to assist with sharpening small HSS tool bits on my grinder. I do apologize for the video quality at 720p. When I recorded the video clips I did not realize my camera was set to 720p after a recent software update. I hope you enjoy this video. If you would like see more of SP Wood Art visit us at: www.spwoodart.com Our Webpage www.facebook.com/spwoodart www.plus.google.com/ SPWoodArt1/about www.pinterest.com/spwoodart/ I strive to create handmade, high quality w

 

Evolution Woodturning Handles - Product Overview
By: Axminster Tools & Machinery
September 12, 2017 · 2,793 views

Axminster Evolution Series woodturning handles. The steel shaft has a comfortable medium/hard foam covering. The steel shaft adds mass, making the turning process much smoother. The covering is durable, comfortable and gives a positive non-slip grip while you are turning. The business end has a 12-13mm ER20 collet, which firmly grips onto a 12.7mm(1/2') diameter round bar. Originally intended for use with 12.7mm double-ended turning gouges, you can of course grip any turning tool whose bar diameter is between 12mm and 13mm. ER20 collets do not lock up like conventional collets. They are interc

 

Carter and Son Tools and Woodworking Live Demo days
By: Jim Overton - Jimson's Stuff
September 07, 2017 · 2,889 views

In this video I am reviewing 3 great tools from Carter and Son Toolworks https://carterandsontoolworks.com/ These tools are also available in the UK from the Toolpost http://www.toolpost.co.uk/ I will be doing some live Milliput demos for Record Power Tools at their Woodworking Live event at the D&M Toolshow at Kempton Park Racecourse on the 7th and 8th October. The show actually runs from the 6th till the 8th. www.thetoolshow.com/ www.recordpower.co.uk/ www.milliput.com/ Myself and Nick Zammeti of NZ Woodturning will be attending the Yandles Show this Saturday 9th September 2017 http://www.y

 

E87: Diamond Tipped Tools, International and Site Updates
By: M. Saban Smith Woodturning
September 04, 2017 · 3,339 views

Didn't manage to get as much done today as I would have liked, but not to worry about that - both South Africa and Ireland are placing orders this week, which is awesome. Also, I have borrowed a set of *diamond tipped tools* from Black Line tools to play with for certain types of my turning - more on these in a later video. And, there have been some big changes as far as the business web structure is concerned. Read more here: http://www.msabansmith.com/2017/09/autumn-2017-changes/ ********************************** Visit my website for Hampshire Sheen, Intrinsic Colours, Witty Turner's Clo

 

New tool arrival and it's a Carter and son by Al Furtado
By: Al Furtado
August 30, 2017 · 4,984 views

Stickers continue to arrive be sure to send yours. New tool arrival and it's a Carter and son. https://carterandsontoolworks.com/ Sorry about another video so soon but I feel it's past due on this. I review Carter and son tools and give them a test drive. https://www.facebook.com/TheRebelTurner https://www.youtube.com/channel/UCrux... https://www.youtube.com/user/TheCymruBoy https://www.youtube.com/channel/UCEHc... email me alfurtado@verizon.net Thanks for watching.

 

Jimmy Clewes Improved Design Mate Tools Part 2
By: jimmy clewes
August 20, 2017 · 4,614 views

Improved Design Mate Tools by Jimmy Clewes

 

Jimmy Clewes Improved Design Mate Tools Part 1
By: jimmy clewes
August 20, 2017 · 3,623 views

Improved Design Mate Tools by Jimmy Clewes

 

Jimmy Clewes Mate #1 and Synthetic Sand
By: jimmy clewes
August 15, 2017 · 4,701 views

Jimmy Clewes Mate #1 Woodturning tool and using Synthetic Sand

 

Jimmy Clewes Mate #1 Tool
By: jimmy clewes
August 15, 2017 · 1,591 views

Jimmy Clewes Mate #1 Tool

 

My Piercing Setup
By: Steve Krumanaker
August 05, 2017 · 597 views

The parts I bought for piercing thin turnings. On Ebay NSK Pana Max 4 hole dental hand piece, about 10-15 dollars Inline air regulator, about 15 dollars. At the local Hardware 6' by 3/16' I.D. plastic line 1/8' X 1/8' hose barb. 3/8' X 1/8' brass bushing, about 7 dollars total. Online http://bursforcarving.com/ Air compressor with tank and necessary connections, Minimum 2cfm@40psi or capacity.

 

Tool Review: The Amazing Flat Compass
By: RickTurns
August 03, 2017 · 1,140 views

This is a look at 'the amazing flat compass', a large (24'-25' max diameter) compass that lies flat, instead of upright. It may not be totally amazing, but it's a pretty darn good compass, and well worth what I paid for it. Link to this compass: http://bit.ly/2u5UrIo The music during the close of the video, Happy Little Elves by Audionautix, is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Woodturning at 54a #122 Centre finder and what's next
By: Keith Barrow
July 29, 2017 · 2,398 views

Update on the Centre finder,and what I'll be doing on my next project! If you wish to purchase a centre finder please go to: http://www.woodturningat54a.com

 

Wood Tap Applications
By: George Fotinakes
July 25, 2017 · 148 views

This video demonstrates two different wood tapping applications working in tandem.

 

New Easy Wood Micro Tools / Woodturning
By: Carl Jacobson
July 18, 2017 · 17,998 views

I this video we take a look at the new Easy Wood micro tools. These tools are designed for small lathe project, but I use the detailed for larger projects as well. Easy Wood Tools: http://www.easywoodtools.com/ Welcome to my channel I upload a new woodworking project video every Friday. I'm also live Monday on YouTube and Friday on Twitch. Check out my Twitch channel. https://www.twitch.tv/carljacobson My Etsy shop: https://www.etsy.com/shop/Thewoodshoptv Patreon: https://www.patreon.com/CarlJacobson Website: http://www.thewoodshop.tv/ Instagram: https://www.instagram.com/carljacobson/ Fa

 

Most Interesting Turner
By: Ken Rizza
July 18, 2017 · 208 views

Double Stop Calipers by Woodturners Wonders Available at: https://woodturnerswonders.com/collections/unique-tools/products/spot-on-double-stop-caliper

 

Compact Variable Random Orbital Sander
By: Ken Rizza
July 18, 2017 · 2,036 views

Ken Rizza of Woodturners Wonders demonstrates his Compact Variable Random Orbital Sander. It is available at: https://woodturnerswonders.com/collections/random-orbital-sanders/products/orbital-sander-variable-speed

 

Wood Turning - Make a Beading Tool from a Spindle Gouge
By: Mike Waldt
May 22, 2017 · 9,430 views

Inspired by Irish turner Pat Carroll I show my method of making a Beading Tool from a Spindle Gouge. Pat Carroll's Facebook page - https://www.facebook.com/slievebhui.woodturnings UKIWS: http://www.ukiws.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk

 

Ashley Isles Box Scraper - Episode 78
By: Paul Lockwood
May 20, 2017 · 496 views

I've ecently bought the Asley Isled 9mm box scraper. This was a quick project to test the new tool. An Oak box sanded to 600, sanding sealer and Woodwax22. Steve Jones - Woodturner21 https://www.youtube.com/channel/UCrpnmkOqFJ8spyaQcgMx-og Ashley Isles http://www.ashleyilestoolstore.co.uk/ Music My Favorite Regret (Instrumental) By Josh Woodward http://freemusicarchive.org/music/Jos... From The Free Music Archive http://freemusicarchive.org CC Attribution 4.0 International https://creativecommons.org/licenses/... Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

My New Tool
By: Brendan Stemp
May 07, 2017 · 7,478 views

The DEN-x is a tool used to cut the notches or grooves , at the correct depth, in the body and knob of grinders, that use the Crushgrind mechanism. See this video for more details. Available at https://store.youturn.tv/collections/you-turn-products/products/den-x-double-ended-notch-cutter

 

Robert Sorby Spiralling & Texturing Set
By: Mike Waldt
April 16, 2017 · 11,152 views

An introduction to the basic set up and use of the Robert Sorby Texturing and Spiralling Set. Olivers Woodturning: https://www.oliverswoodturning.co.uk/ UKIWS: http://www.ukiws.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk

 

Sharpening a roughing gouge
By: Tormek Sharpening Innovation
March 27, 2017 · 6,028 views

Woodturning artist Nick Agar shows how to sharpen a roughing gouge with the Tormek Wet Sharpening System. In this film, Nick uses the following products: Woodturning artist Nick Agar shows how to get your desired shape on your gouges. In this film, Nick uses the following products: TTS-100 Turning Tool Setter: https://www.tormek.com/international/en/accessories/other-accessories/tts-100-turning-tool-setter/ SVS-50 Multi Jig: https://www.tormek.com/international/en/grinding-jigs/svs-50-multi-jig/ PA-70 Honing Compound: https://www.tormek.com/international/en/accessories/other-accessories/pa-70-honing-compound/ LA-120 Profiled Leather Honing Wheels: https://www.tormek.com/international/en/accessories/other-accessories/la-120-profiled-leather-honing-wheel/ Tormek T-8: https://www.tormek.com/international/en/machine-models/tormek-t-8

 

my segmenting tools and shop
By: earl's small segment shop
March 25, 2017 · 2,236 views

my tools used for segmenting and my shop

 

Конус для токарного (Cone for lathe)
By: Аleksey Bek
February 19, 2017 · 1,215 views

Краткий обзор конусов задней бабки для токарного станка. Конус для дерева и металла, в чем различие. A brief overview of the cones tailstock for lathe. Cone for wood and metal, what a difference.

 

25 - Enhancing the Bowl Gauge for Natural Edge
By: Bill Rockwood
February 19, 2017 · 331 views

In this video I borrow from Sam Angelo to enhance the Reed Gray inspired bowl gauge for use on natural edge bowls.

 

The AXE Carbide Turning Tools by Carter Products
By: Craft Supplies USA
February 10, 2017 · 22,442 views

AXE tools by Carter Products are the next generation in replaceable carbide cutter turning tools. Shop now: https://www.woodturnerscatalog.com/t/131/Carbide-Insert-Turning-Tools?b 203&utm_source youtube&utm_medium description&utm_campaign videos Subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Innovative features include an axe shaped handle, shear scraping ability and improved overall design at a price that’s 25% lower than the leading brand of carbide cutter tools. Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodturning tools a

 

The Bowl Saver MAX
By: Brendan Stemp
February 02, 2017 · 26,349 views

A look at the new Bowl Saver Max from Woodcut Tools. How to set it up and use it.

 

Токарные резцы (Turning tools)
By: Аleksey Bek
January 27, 2017 · 3,719 views

Краткий обзор резцов для работы на токарном станке. Самодельные резцы и резцы фирменные. Различия и область применения. A brief overview of the cutters to work on a lathe. Homemade cutters and the cutters brand. Differences and scope.

 

Sorby texture tool test by Al Furtado
By: Al Furtado
December 31, 2016 · 3,101 views

Sorby texture tool test I turn a slim Brazilian Pepper tree vase, I must say the tool works great but in this case the wood had enough character to stand on it's own. I have to admit Pepper tree has some amazing character

 

BerdanTool
By: Rick Hutcheson
December 03, 2016 · 11 views

 

Gubias de corte y anillo
By: Heinrich Garcia
November 10, 2016 · 2,259 views

Gubias de corte y anillo

 

The Versatile Beading and Parting Tool for Woodturning
By: Mike Peace Woodturning
November 04, 2016 · 21,876 views

I demonstrate how useful a beading and parting woodturning tool is for making beads and using as a parting tool. I show how to make a beading and parting tool from an inexpensive High Speed Steel blank. You can get the inexpensive HSS blank from my Amazon shop. https://www.amazon.com/shop/mikepeacewoodturning It also helps support my channel. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Stuart Batty - How Gouges Cut
By: Rocky Mountain Woodturners
September 22, 2016 · 45,544 views

Demonstration given to the Rocky Mountain Woodturners by Stuart Batty on 'How Gouges Cut'. September 8, 2016. Describes how wood is cut by different gouges and techniques for sharpening them.

 

Mate #1 Tool
By: jimmy clewes
September 17, 2016 · 1,915 views

Using the Mate #1 Tool

 

Carter and Son Tools: REVIEW by Sam Angelo
By: WYOMINGWOODTURNER
September 03, 2016 · 11,165 views

In this tool review, I look at 5 Carter and Son Tools plus a close-up of the handles. I hope the information in this video helps you to make a decision on whether to purchase a Carter and Son Tool. CARTER AND SON TOOLS Website .....LINK http://carterandsontoolworks.com

 

Wood Turning - Robert Sorby Ulitma Follow Up and a shout out!
By: Mike Waldt
July 31, 2016 · 4,222 views

Paul Lockwood - https://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w

 

Tool control with unconventional sharp objects. Don't try this at home
By: Lyle Jamieson
July 29, 2016 · 3,813 views

Tool control with unconventional sharp objects. Don't try this at home. This is for entertainment only. Do not try this at home. An unsupported tool can get a violent catch and result in injury. Only use conventional tools to turn. Welcome to my channel. I have been turning all my life and want to share the techniques I discovered over the years. The first 40 videos on my channel were technique oriented showing different parts of the process. Lately, I have been doing project oriented videos. I still hope over the long haul to cover all the techniques over multiple videos. This project fo

 

The Easy Wood Tools Woodturning System with Stuart Kent
By: EasyWoodTools
July 28, 2016 · 4,652 views

Stuart Kent discusses the Easy Wood Tools Woodturning System and why he teaches with it at The North Carolina Furniture School

 

Wood Turning - Robert Sorby Sovereign Ultima Review
By: Mike Waldt
July 24, 2016 · 18,348 views

I review the Robert Sorby Soveriegn Ultima Hollowing system. Olivers Woodturning : https://www.oliverswoodturning.co.uk

 

Revolution Hollowing Tool
By: Mark Sanger
July 18, 2016 · 6,391 views

A short video produced by me showing the Crown Revolution hollowing tool and its versatility, available from my web site www.marksanger.co.uk or all good woodturning supply outlets worldwide.

 

Unboxing - - Thompson 5/8' Spindle gouge, by Sam Angelo
By: WYOMINGWOODTURNER
June 08, 2016 · 9,283 views

In this exciting video, Sam opens the box containing a 5/8' Doug Thompson spindle gouge. Next he takes the tool to the grinder to refine the shape and finishes with a bit of turning.

 

My woodturning tool on Extreme Interrupted cuts
By: SegmentedTurner
April 03, 2016 · 10,080 views

In this video I demonstrate the advantages of my woodturning tool on extreme interrupted cutting of a bowl blank.

 

D-Way Tool Beading Tool Review
By: Rock Springs Woodturner
April 02, 2016 · 1,722 views

D-Way beading and point tool review

 

All New Evolution Virtual Woodturning Mask
By: Axminster Tools & Machinery
April 01, 2016 · 24,454 views

Hot on the heels of the Evolution Powered Respirator comes the next obvious step in Woodturning! Hobbies are expensive, lathes are big and shavings are messy, if only you could turn in your living room without all that hassle...

 

Thompson Lathe Tools Review
By: Rock Springs Woodturner
March 21, 2016 · 4,290 views

A review of Doug Thompson Lathe Tools thompsonlathetools.com

 

USING THE BIG UGLY TOOL by Reed Gray aka Robo Hippy
By: robohippy
March 14, 2016 · 11,822 views

After posting my video on The Big Ugly Tool I got a lot of requests for a video demonstrating how to use it.

 

Oneway Termite Hollowing Tool Review
By: The Wood Whirler
January 31, 2016 · 5,615 views

I give a honest review of the Oneway Termite Hollowing tool.

 

Gubia de Cañon de 9 mm
By: HERRAMIENTALLER 2021
January 21, 2016 · 527 views

Torneado de madera y herramientas varias

 

Video 14 review of new tools
By: Harry’s Woodcraft
January 11, 2016 · 766 views

Harry’s Woodcraft at the The Little Garden Shed Workshop video 14 I recently bought new Hollowing tools, in this video I make handles, and do a review of the new tools George Watkins From The Tree Website: http://www.fromthetree.co.uk/hollowing-tools.html YouTube: https://www.youtube.com/user/1FromTheTree Music Humidity - Silent Partner, The Little Garden Shed Workshop supporting, www.ukiws.co.uk Mike, Martin and Steve. Mike: mike@ukiws.co.uk Steve: steve@ukiws.co.uk Martin: martin@ukiws.co.uk Harry’s Woodcraft The Little Garden Shed Workshop, YouTube https://www.youtube.com/channel/UCHEczAGapgRq37HBQM_FtoA Google https://plus.google.com/u/0/ HarryWatts65/posts Instagram https://instagram.com/harrys_woodcraft/ Twitter https://twitter.com/HarrysWoodcraft Thank you for watching Please like, share and subscribe

 

Working with Bedah tool . ΔουλευοΠτΠς ÏƒÏ„Î¿Î ÎžÏ…Î»Î¿Ï„Î¿Ï Î Î¿
By: Kostas Annikas Deftereos
December 01, 2015 · 1,394 views

Δουλευοντας στον ξυλοτορνο μονο με Bedah tool

 

Prokraft Bottle Stopper Turning System
By: Jon Whateley
November 16, 2015 · 1,901 views

Watch how easy it is to prepare, mount and turn bottle stoppers with the Prokraft bottle stopper system. No more special tools no more wasted kits - the fasted and easiest way to turn stoppers. Kits available here: http://www.prokraft.co.uk/bar---kitchen-kits.html

 

El Formon Oblicuo, Parte 1: Tipos, Formas, Afilado
By: Daniel Vilarino
October 19, 2015 · 19,024 views

Hola/Hi! *** This video is in Spanish, if you prefer to watch the English version, please click in the following link: https://youtu.be/MCLaiU6WO4o' Este video está en Español. En este video, hago una presentación de las características principales del Formón Oblicuo, sus formas y tipos, diferentes ángulos a tener en cuenta y también cómo afilar esta herramienta. ***In this video, I make a presentation about the skew chisel characteristics, their shapes and types, different angles to take into account and also how to sharpen the tool.*** Este es el primero de una serie de dos episodios, en

 

Wood Turning with Carter and Son Toolworks
By: Carter and Son Toolworks
September 17, 2015 · 2,722 views

It's our goal to share helpful wood turning tips and tutorials with you! Check out the videos on our channel and subscribe to stay in the loop. Thank you, and happy turning from Carter and Son Toolworks! For American-made tools visit: www.carterandsontoolworks.com Facebook: https://www.facebook.com/carterandsontoolworks

 

Afilado de Gubia Perfil Convencional a 60 Grados
By: Daniel Vilarino
September 15, 2015 · 7,063 views

Hola/Hi! ***This video is in Spanish, if you prefer to watch the English version, please click in the following link: https://youtu.be/E-0ePDxZcGI*** Este video está en Español. En el video anterior habíamos replicado el perfil de afilado de una gubia que habíamos recibido de fábrica, con un afilado convencional y un ángulo de 43 . En este video, vamos a re formatear el perfil, manteniendo un afilado convencional, pero con un ángulo de 60 . ***In the previous video, we replicated the sharpening profile of a bowl gouge as it came from the factory, with its conventional grinde and its 43 angl

 

Replicacià n del Perfil de Afilado de una Gubia
By: Daniel Vilarino
September 09, 2015 · 8,768 views

Hola/Hi! ***This video is in Spanish, in you prefer to watch it in English, please click in the following link: http://youtu.be/B3eiF0jfB4g *** Este video está en Español En este video muestro como replicar el perfil de afilado de una gubia que uno ha conseguido, ya sea de fábrica, o usada. ***In this video I show how you can replicate the sharpening profile of a bowl gouge that you purchased or obtained second hand.*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this video and if

 

La Gubia, Geometria de Corte
By: Daniel Vilarino
August 22, 2015 · 3,179 views

Hola/Hi! ***This video is in Spanish, if you prefer to watch it in English, please click in the following link: http://youtu.be/Lop4vZlxQZM*** Este video está en Español. En un video anterior, había mostrado cómo afilar un par de gubias con un afilado convencional, que sería útil para trabajar el fondo de los cuencos. En este video, trato de explicar un poco la geometría del corte y el por qué el afilado irlandés (o con forma de uña) es más útil para trabajar la parte externa y solo hasta cierto punto la interna del cuenco, y el afilado tradicional con el talón rebajado es mejor para trabaja

 

Re Perfilado de Gubias
By: Daniel Vilarino
August 15, 2015 · 7,526 views

Hola/Hi! ***This video is in Spanish, if you prefer to warch it in English, please click in the following link: http://youtu.be/4-wM4Q7I9lI*** Este video está en Español En este video muestro como reformateo el perfil de dos gubias de cañón, para convertirlas en afilado tradicional de ángulo abierto, para trabajar en el fondo de los cuencos. ***In this video I show how I reshaped the gouge profile of two bowl gouges to convert them in bottomfeeders, to work the bottom of bowls. Ojalá que hayan disfrutado de este episodio y si fue así, por favor realicen comentarios, dénle un 'me gusta' y su

 

Woodturning at 54a. #23.Inlay tip and new tools
By: Keith Barrow
August 01, 2015 · 1,685 views

Link to Robbiethewoodturner's channel; https://www.youtube.com/channel/UC5JHV0RLR0uQLdWHVpmCe-g

 

D-Way Beading tool review by Sam angelo
By: WYOMINGWOODTURNER
July 28, 2015 · 6,700 views

Sam show-cases his collection of D-Way beading tools. He demonstrates how he uses the tools and gives a shout-out to Dave Schweitzer.

 

Ring Master tool setting the blades
By: Peter Merritt
July 13, 2015 · 2,370 views

How to setup the Ring Master Blades

 

Carter & Son Turning Tools
By: PeachtreeWoodworks
July 08, 2015 · 2,038 views

Carter & Son turning tools are coming to Peachtree Woodworking very soon! In the mean time, check out there video...

 

#243 Tool care and more
By: Cap'n Eddie Castelin
June 29, 2015 · 7,148 views

This video is about tool care and Freedom Pens.

 

Torneado: Herramientas de Corte vs Raspadores
By: Daniel Vilarino
June 23, 2015 · 15,796 views

Hola/Hi! ***This video is in Spanish, but there is an English version, please, if you prefer that language, click in the following link: http://youtu.be/mgRFJdRRnwg.*** Este video está en Español. En este video muestro cómo he organizado un tablero de herramientas detrás de mi torno y explico algunas diferencias entre las herramientas de corte (formón oblicuo, gubia de vaciado, gubia de desbastar, gubia de perfilado, etc.) y las herramientas de raspado (raspadores de punta redondeada, para cuencos, herramientas con cortadores de carburo, etc.). ***In this video I show how I organized a tool

 

Pen Turning Tools
By: Jamie Coyle
June 17, 2015 · 84 views

Check this link http://www.timberturners.com/TurningProjectKits-s/25.htm right here for more information on Timber Turners pen turning blanks. Making wooden pens in not only an enjoyable hobby, it can also put a few extra dollars in your pocket. Today many people appreciate a fine writing instrument, and what better way to show style than with an elegant, environmentally friendly pen or pencil. Therefore choose the best Timber Turners pen turning blanks. Follow Us: http://penmakingsupplies.tumblr.com/PenTurningKits

 

Introduction to Carter & Son Toolworks Wood Turning Tools
By: Carter and Son Toolworks
May 25, 2015 · 2,769 views

At Carter and Son Toolworks we manufacture quality woodturning tools in our Seattle, Washington factory.

 

The Blind Wood Turner - A Quick Go With My New Spiralling Tool
By: Blind Woodturner
April 30, 2015 · 558 views

In this episode the Blind Wood Turner spends a few minutes having a go with his new mini spiralling tool.

 

#127 Herramienta para Ribetes - Beading tool
By: Miguel Sanchez
April 20, 2015 · 14,445 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Una herramienta bien sencilla y muy util, espero que os guste http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

FUNdamentals of Woodturning: Basic Woodturning Tools #3 part 2
By: WYOMINGWOODTURNER
March 14, 2015 · 7,107 views

MY LIST.... of starter tools for woodturning. Every new turner must decide which tools to buy. A good video for those new to woodturning.

 

FUNdamentals of woodturning: #4-- Specialty Tools
By: WYOMINGWOODTURNER
March 04, 2015 · 14,269 views

In this short video Sam shows some of his woodturning tools that don't fit into a particular category. These tools are considered specialty tools. Please leave your comments and share Sam's videos.

 

FUNdamentals of woodturning: #3 Tool Identification
By: WYOMINGWOODTURNER
February 26, 2015 · 24,682 views

In the 3d video of this series, Sam looks at woodturning tool categories.

 

A Tenon Cutter from a Wrench
By: RickTurns
January 21, 2015 · 53,914 views

Woodturning: Make an accurate tenon sizing cutter from an open end wrench. Several other Youtube videos discuss this technique: Cap'n Eddie - Perfect Tenons https://www.youtube.com/watch?v qATykxAuZ-E AsWoodTurns - Easy DIY Tenon Cutters https://www.youtube.com/watch?v C4gO1jA2d0g RJBWoodTurner - Home Made Tenon Tool https://www.youtube.com/watch?v CEqroK7qIRY

 

Pen Blanks Using the Speed Gouge
By: Ron Brown
December 19, 2014 · 1,941 views

Ron turns some difficult wooden pen blanks using a 2' spindle roughing gouge and the 'Speed Gouge'. More info at www.ronbrownsbest.com

 

Carter & Son Toolworks Premium Woodturning Tools
By: Craft Supplies USA
October 29, 2014 · 19,123 views

Carter & Son M42 HSS Premium Woodturning Tools at their finest! Buy now: https://www.woodturnerscatalog.com/Sales/42/Carter-and-Son-Toolworks?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Precision machined from long-wearing M42 high-speed steel (with 10% cobalt, hardened to 68HRC and triple tempered for strength, Carter tools are as fine a tool as you can buy anywhere. A family business built on honesty, customer service, and a passion for woodturning, Carter and Son Toolworks believe in build

 

The Mini Revolution Hollowing Tool from Crown Hand Tools Sheffield
By: Mark Sanger
October 03, 2014 · 43,794 views

Watch the New 'Mini Revolution' Hollowing tool, from Crown Hand Tools of Sheffield, UK, being demonstrated by Mark Sanger.

 

A close up look at the Robert Sorby 67HS Turning 6 Piece Tool Set
By: Olivers Woodturning
September 29, 2014 · 2,075 views

This is the Robert Sorby 67HS Turning 6 Piece Tool Set. A high end, flagship woodturning tool set. For more info please visit https://www.oliverswoodturning.co.uk/product/67hs-6-piece-turning-tool-set

 

Knurling Sampler With Ron Brown
By: Ron Brown
September 22, 2014 · 2,555 views

Texturing turned items with a woodturning Knurling tool; tops, acorn boxes, lidded boxes, etc. A sampler of a few items easily decorated with this type of tool. More info: www.ronbrownsbest.com

 

Woodturning Tools and their Uses
By: Mid-Maryland Woodturners Club
September 03, 2014 · 32,683 views

Arnie Miles demonstrates 'Tools and their Uses' at the August 2014 meeting of the club.

 

Sovereign Ultima Hollowing System - Robert Sorby - No Handle
By: Olivers Woodturning
August 01, 2014 · 1,942 views

This is the Sovereign Ultima Hollowing System from Robert Sorby, in this case with no handle included ( SOV-RSULTS and SOV-RSULTM). For more info visit https://www.oliverswoodturning.co.uk/product/sov-rsultm-sovereign-ultima-hollowing-system-shank

 

Spiralling and texturing tool part 1
By: PeachtreeWoodworks
April 15, 2014 · 1,391 views

Adding such decorations as spirals to turned pieces was once the domain of the privileged. Now you can venture into this field and create spirals to your hearts content. The Robert Sorby Spiralling System unhandled is a further development on the texturing tool and is used to create both left and right handed spirals with ease. It features an innovative rest with indexed reference positions, which enable the replication of the spirals. Differing pitch and twist profiles are made possible by altering the presentation angle of the cutter or by changing the cutter to a different one.

 

A video guide to the Robert Sorby Chattertool
By: PeachtreeWoodworks
April 15, 2014 · 660 views

Chattertool patterns add a neat, random decoration on end grain like box lids. These are created by using the Robert Sorby chattertool which comes with two different double-ended chattering tips and a handy scraper cutter.

 

A video guide of the Robert Sorby Sandmaster
By: PeachtreeWoodworks
April 15, 2014 · 2,037 views

The Robert Sorby Sandmaster has been designed to produce a fast and efficient finish to any bowl or platter, without producing the unsightly radial-sanding lines produced by traditional sanding methods. Because it is spinning at hight speeds, the life of the abrasive is extended. Not only is all the surface used, but the special grade of abrasive reduces clogging. The Robert Sorby Sandmaster has been fitted with a phosphor bronze bearing. This eliminates the possibility of premature failure caused by dust. It is normal for the head of the Sandmaster to get hot during use due to the high speed that the pad reaches.

 

A video guide to the Robert Sorby Spindlemaster
By: PeachtreeWoodworks
April 14, 2014 · 1,618 views

The spindlemaster is a great replacement for the skew. Its design is flat on one surface, and oval on the other makes dig-ins a thing of the past. It is easy to use for even the least experienced turner. In addition to doing the regular planing job of the skew chisel, the Spindlemaster will also cut both beads and coves with the greatest ease.

 

Robert Sorby Sovereign Ultima wmv
By: PeachtreeWoodworks
April 14, 2014 · 607 views

The Sovereign Ultima Hollowing System forms part of the Sovereign System but is also a stand-alone tool in its own right. Available in two sizes it enables woodturners to produce hollow forms up to 11' (275mm) with the small version and up to 16' (400mm) with the medium in both wet and dry woods. It has a cutter system that slices through the wood rather than scraping and the clever design allows the shavings to clear without clogging. It is equally effective on bowl grain work as well as end-grain projects. The cutter is able to make light or heavy cuts and the unique micro adjust feature enables the turner to set the cutter depth with ease.

 

A video guide on the Robert Sorby Hollowmaster
By: PeachtreeWoodworks
April 11, 2014 · 1,705 views

The Hollowmaster starts where the Multi Tip Hollowing Tool finishes. It has many of the same features but enable the turner to work even further round in blind holes

 

Shear scraping with the Robert Sorby Multi tip tool
By: PeachtreeWoodworks
April 11, 2014 · 1,817 views

The Multi Tip Hollowing Tool (RS200KT) is our recommendation for those who wish to take their first steps in hollowing and those working on projects of 6' and under. It is one of the most versatile tools around.

 

Robert Sorby Sovereign System
By: PeachtreeWoodworks
April 10, 2014 · 741 views

Sovereign is a handle system for woodturners. Like all other Robert Sorby products it is made in Sheffield to the most exacting engineering standards. Sovereign is the name of the interchangeable handle which comes in three lengths - 12', 16' and 22'.

 

My Review of the Carter & Son Toolworks Lathe tools
By: Bob Hamilton
February 03, 2014 · 11,004 views

I have had the opportunity to try out some new lathe tools produced by Carter & Son Toolworks out of Seattle, Washington: http://carterandsontoolworks.com/ The tools arrived ready to use right out of the package and were a delight to use. My thanks to Valerie and Paul for giving me the opportunity to test these tools.

 

bowl ID cutter
By: oreos40
February 02, 2014 · 776 views

A short video of the Bowl ID cutter for turning the inside curve of a bowl on a wood lathe it is adjustable for both depth and diameter. to see it in action http://www.youtube.com/watch?v Z1sf00vxB3M&feature player_detailpage

 

Shaping tool
By: Livio Maritati
December 02, 2013 · 2,001 views

Autocostruzione di un utensile per modellare il legno (Shaping Tool) utilizzando un vecchio giravite scartato da altri.Della serie 'Non si butta mai niente'.

 

Woodfast Turning Tools
By: Brendan Stemp
November 17, 2013 · 5,469 views

A review of the Woodfast wood turning tools.

 

Wagner Texturing tool Review
By: WYOMINGWOODTURNER
November 14, 2013 · 36,515 views

Sam looks at the Joe Wagner texturing tool used to decorate small projects. He demonstrates various patterns which are capable with this tool. Sam uses color to accentuate the patterns. This tool comes in 3 sizes and can be purchased from Craft Supply USA.

 

D-Way Tools Beading Tools Part2
By: Larry Hauch
October 13, 2013 · 8,335 views

Dave Schweitzer continues with his demonstration of using the D-Way Tools beading tools.

 

D-WayTools Beading Tools Part 1
By: Larry Hauch
October 06, 2013 · 13,326 views

Dave Schweitzer demonstrates how to use the D-Way Tools beading and diamond tools

 

Rotary Texturizing Tool
By: PeachtreeWoodworks
September 10, 2013 · 3,350 views

The Rotary Texturing Tool is a unique tool that allows you to add beautiful and extraordinary decoration quickly and easily to a wide variety of turned projects in wood, acrylic, antler and more. Get yours here... http://www.ptreeusa.com/wood_turning_specialty_tools.htm

 

Ashley Iles cork handled turning tools review
By: Ashley Iles Tool Store
August 07, 2013 · 849 views

Stumpy, Dumpy and Skinny Milliny are the three cork-handled tools made by Ashley Iles and available online at www.ashleyilestoolstore.co.uk. In this video Paul Loseby runs through the benefits of these high quality British-made wood turning tools.

 

The Chatter Tool with Ron Brown
By: PeachtreeWoodworks
July 17, 2013 · 9,277 views

The Chatter is a great way to add some texture and unique accents to your turning projects. In this video, Ron Brown shows you how it works. Get the Chatter Tool here... http://www.ptreeusa.com/wood_turning_specialty_tools.htm

 

Review of Ashley Iles All Rounder wood turning tool (Part 6 of 7)
By: Ashley Iles Tool Store
June 24, 2013 · 1,101 views

UK woodturner Paul Loseby (http://www.loseby.co.uk/turning.htm) demonstrates how versatile and easy to use the Ashley Iles 'All Rounder' turning tool is. This high quality British-made wood working tool is aimed at beginners or the occasional turner who may not want to spend much on tools. Paul shows this one turning tool being used for spindle work and the complete turning of a shallow bowl, including roughing out, planing, coving, beading, hollowing and scraping. The All Rounder is available worldwide with or without a handle from www.ashleyilestoolstore.co.uk The video is split into seven parts: Part 1 - Introduction Part 2 - Spindle work - roughing, planing, beading & coving, scraping Part 3 - Turning a bowl - forming the blank Part 4 - Turning a bowl - cutting the spigot, shaping the outside Part 5 - Turning a bowl - facing, shaping Part 6 - Turning a bowl - hollowing out & finishing off Part 7 - Summing up

 

Review of Ashley Iles All Rounder wood turning tool (Part 5 of 7)
By: Ashley Iles Tool Store
June 24, 2013 · 534 views

UK woodturner Paul Loseby (http://www.loseby.co.uk/turning.htm) demonstrates how versatile and easy to use the Ashley Iles 'All Rounder' turning tool is. This high quality British-made wood working tool is aimed at beginners or the occasional turner who may not want to spend much on tools. Paul shows this one turning tool being used for spindle work and the complete turning of a shallow bowl, including roughing out, planing, coving, beading, hollowing and scraping. The All Rounder is available worldwide with or without a handle from www.ashleyilestoolstore.co.uk The video is split into seven parts: Part 1 - Introduction Part 2 - Spindle work - roughing, planing, beading & coving, scraping Part 3 - Turning a bowl - forming the blank Part 4 - Turning a bowl - cutting the spigot, shaping the outside Part 5 - Turning a bowl - facing, shaping Part 6 - Turning a bowl - hollowing out & finishing off Part 7 - Summing up

 

Review of Ashley Iles All Rounder wood turning tool (Part 4 of 7)
By: Ashley Iles Tool Store
June 24, 2013 · 612 views

UK woodturner Paul Loseby (http://www.loseby.co.uk/turning.htm) demonstrates how versatile and easy to use the Ashley Iles 'All Rounder' turning tool is. This high quality British-made wood working tool is aimed at beginners or the occasional turner who may not want to spend much on tools. Paul shows this one turning tool being used for spindle work and the complete turning of a shallow bowl, including roughing out, planing, coving, beading, hollowing and scraping. The All Rounder is available worldwide with or without a handle from www.ashleyilestoolstore.co.uk The video is split into seven parts: Part 1 - Introduction Part 2 - Spindle work - roughing, planing, beading & coving, scraping Part 3 - Turning a bowl - forming the blank Part 4 - Turning a bowl - cutting the spigot, shaping the outside Part 5 - Turning a bowl - facing, shaping Part 6 - Turning a bowl - hollowing out & finishing off Part 7 - Summing up

 

Review of Ashley Iles All Rounder wood turning tool (Part 3 of 7)
By: Ashley Iles Tool Store
June 24, 2013 · 1,367 views

UK woodturner Paul Loseby (http://www.loseby.co.uk/turning.htm) demonstrates how versatile and easy to use the Ashley Iles 'All Rounder' turning tool is. This high quality British-made wood working tool is aimed at beginners or the occasional turner who may not want to spend much on tools. Paul shows this one turning tool being used for spindle work and the complete turning of a shallow bowl, including roughing out, planing, coving, beading, hollowing and scraping. The All Rounder is available worldwide with or without a handle from www.ashleyilestoolstore.co.uk The video is split into seven parts: Part 1 - Introduction Part 2 - Spindle work - roughing, planing, beading & coving, scraping Part 3 - Turning a bowl - forming the blank Part 4 - Turning a bowl - cutting the spigot, shaping the outside Part 5 - Turning a bowl - facing, shaping Part 6 - Turning a bowl - hollowing out & finishing off Part 7 - Summing up

 

Review of Ashley Iles All Rounder wood turning tool (Part 2 of 7)
By: Ashley Iles Tool Store
June 24, 2013 · 1,769 views

UK woodturner Paul Loseby (http://www.loseby.co.uk/turning.htm) demonstrates how versatile and easy to use the Ashley Iles 'All Rounder' turning tool is. This high quality British-made wood working tool is aimed at beginners or the occasional turner who may not want to spend much on tools. Paul shows this one turning tool being used for spindle work and the complete turning of a shallow bowl, including roughing out, planing, coving, beading, hollowing and scraping. The All Rounder is available worldwide with or without a handle from www.ashleyilestoolstore.co.uk The video is split into seven parts: Part 1 - Introduction Part 2 - Spindle work - roughing, planing, beading & coving, scraping Part 3 - Turning a bowl - forming the blank Part 4 - Turning a bowl - cutting the spigot, shaping the outside Part 5 - Turning a bowl - facing, shaping Part 6 - Turning a bowl - hollowing out & finishing off Part 7 - Summing up

 

Review of Ashley Iles All Rounder wood turning tool (Part 1 of 7)
By: Ashley Iles Tool Store
June 24, 2013 · 1,670 views

UK woodturner Paul Loseby demonstrates how versatile and easy to use the Ashley Iles 'All Rounder' wood turning tool is. This high quality British-made wood working tool is aimed at beginners or the occasional turner who may not want to spend much on tools. Paul shows this one turning tool being used for spindle work and the complete turning of a shallow bowl, including roughing out, planing, coving, beading, hollowing and scraping. The All Rounder is available worldwide with or without a handle from http://www.ashleyilestoolstore.co.uk. The video is split into seven parts: Part 1 - Introduction Part 2 - Spindle work - roughing, planing, beading & coving, scraping Part 3 - Turning a bowl - forming the blank Part 4 - Turning a bowl - cutting the spigot, shaping the outside Part 5 - Turning a bowl - facing, shaping Part 6 - Turning a bowl - hollowing out & finishing off Part 7 - Summing up Paul's turning website can be found at http://www.loseby.co.uk/turning.htm

 

Review of Ashley Iles All Rounder wood turning tool (Part 7 of 7)
By: Ashley Iles Tool Store
June 24, 2013 · 1,085 views

UK woodturner Paul Loseby (http://www.loseby.co.uk/turning.htm) demonstrates how versatile and easy to use the Ashley Iles 'All Rounder' turning tool is. This high quality British-made wood working tool is aimed at beginners or the occasional turner who may not want to spend much on tools. Paul shows this one turning tool being used for spindle work and the complete turning of a shallow bowl, including roughing out, planing, coving, beading, hollowing and scraping. The All Rounder is available worldwide with or without a handle from www.ashleyilestoolstore.co.uk The video is split into seven parts: Part 1 - Introduction Part 2 - Spindle work - roughing, planing, beading & coving, scraping Part 3 - Turning a bowl - forming the blank Part 4 - Turning a bowl - cutting the spigot, shaping the outside Part 5 - Turning a bowl - facing, shaping Part 6 - Turning a bowl - hollowing out & finishing off Part 7 - Summing up

 

D-WayTools Skew and Spindle Gouge Demonstration
By: Larry Hauch
June 09, 2013 · 7,621 views

Dave demonstrates using and sharpening his Skew as well as showing the use of the D-Way tools spindle gouge

 

D-WayTools Hollowing Tool
By: Larry Hauch
June 09, 2013 · 47,872 views

Dave demonstrates how to use the D-WayTools hollowing tool.

 

Robert Sorby Sovereign System
By: Robert Sorby
April 26, 2013 · 15,435 views

The Robert Sorby Sovereign is the most flexible handled system available offering the woodturner the widest variety of tool choice and handle size on the market. In this video Robert Sorby demonstrator Chris Pouncy describes some of the latest additions to the most popular handle system on the market.

 

Hurricane CPM-10V Bowl Gouge - Product Introduction - Woodturning Tools
By: The Woodturning Store
March 25, 2013 · 4,679 views

In HD, this video highlights the CPM-10V Bowl Gouge from Hurricane Turning Tools. Learn about the tool, how/why it was developed, with close-up detail on how it is sharpened. Available at www.thewoodturningstore.com. Thanks for watching

 

Tournage Crochet Jurassien - Woodturning, french hook efficiency
By: Claude Bondet
February 21, 2013 · 8,269 views

Cet outil de creusage unique, forgé, permet un évidement très rapide et très propre de la pièce à creuser en bois de bout. Ce crochet est-il jurassien ? Probablement pas, puisqu'on le retrouve dans les ouvrages de Plumier et de Bergeron dans une forme similaire. Disons que dans la région et surtout dans le Haut Bugey, il a été adapté aux travaux de creusage de boites, bonbonnières, cendriers, mortiers, etc... Une prise en mains est indispensable car le positionnement de l'outil est délicat, mais une fois maîtrisé, vous ne pourrez plus vous en passer !

 

Wood Lathe, Naked Turner Exposes How His Tool Works
By: Erik Anderson
February 07, 2013 · 1,107 views

Informational Video

 

D-Way Tools Parting Tool
By: Larry Hauch
January 27, 2013 · 11,095 views

Dave shows how to sharpen and use the D-Way Tools Parting Tool. He also demonstrates how to make some small bracelets (using a smaller cylinder, you can make napkin rings).

 

Robert Sorby TurnMaster
By: Craft Supplies USA
January 23, 2013 · 215,587 views

Let us show you the Robert Sorby Turnmaster in action! See how easy it is to turn with. Learn more: https://www.woodturnerscatalog.com/p/131/5927/Robert-Sorby-TurnMaster-Tool-with-3-HSS-Cutters?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA The Robert Sorby TurnMaster is an incredibly versatile, heavy-duty turning tool that's capable of holding any one of a wide range of interchangeable cutters to suit almost any woodturning application. At the heart of the Robert Sorby TurnMaster tool is a

 

D-WayTools Tool Handles
By: Larry Hauch
December 15, 2012 · 9,787 views

Dave shows the different D-WayTools handles and how to use them. Also, Dave talks about the bowls that have been sitting on the back of the bench

 

Woodturning With an Axe
By: Angus Pitt
November 01, 2012 · 1,324 views

Turning with an axe axe just for fun!!!

 

Using the Drozda Vortex Tool for Woodturning
By: Cindy Drozda
October 21, 2012 · 18,945 views

How I use my signature Vortex Tool. In my other videos, I show how I use my other signature tools, and how to sharpen them. Please visit my website, http://www.cindydrozda.com for more information about me, my Artwork and Woodturning Instruction. Instructional Woodturning DVDs, Signature Woodturning Tools, Supplies and Accessories for Woodturning are now available for online ordering! Questions and Comments are invited.

 

Osprey turning tools
By: john60lucas
September 20, 2012 · 12,437 views

This video is about using the Hunter Osprey tools

 

Henry Taylor Decorating Elf
By: Axminster Tools & Machinery
September 14, 2012 · 3,433 views

This unique tool was originally designed by William Hudson (USA), known to his friends as the Turning Elf -- hence the product name. Now manufactured in England by Henry Taylor Tools, this tool produces some excellent effects on both faceplate and spindle work. Woodturners who produce boxes will find this tool invaluable for surface decoration and it can be combined with colouring followed by liming wax or burning effects. The ergonomically profiled handle is made from stained beech with a solid brass shaft that is inserted into the body for 100mm(4') to add weight and feel to the overall desi

 

Wood Turning - Captive Ring Tool Demonstration
By: Mike Waldt
September 04, 2012 · 69,076 views

A demonstration on how I form and release a wooden ring, for use on projects like goblets and babies rattles, using a captive ring tool. I hope you find it of some use.

 

TurnMaster from Robert Sorby
By: Robert Sorby
August 23, 2012 · 89,793 views

The Robert Sorby TurnMaster has several unique features and is suitable for woodturners of all levels including anyone that has never turned before. It uses 3 cutting edge technologies, combined with a patented 3 position indexible head, all in one flexible woodturning tool system. The choice of cutting edge materials are Tungsten Carbide, High Speed steel and titanium Nitride coated High speed steel.

 

Chatter Tool Methods Update
By: Ron Brown
August 14, 2012 · 5,928 views

I have updated my very successful video 'Chatter Tool Methods - A Complete Course'. Here is the update.

 

WOODTURNING on the Lathe: TOOL REVIEW
By: WYOMINGWOODTURNER
July 12, 2012 · 2,852 views

Review of basic woodturning tools. Sam shows the main categories of woodturning tools and the 'grind' on each: bowl gouges, spindle gouges, scrapers, parting tools, and others.

 

Crown Revolution Super Ring video Part 2
By: Mark Sanger
May 18, 2012 · 36,685 views

Roughing a deep ash end grain bowl using the Crown Revolution super ring cutter.

 

Using the Crown Revolution Super Ring, Part 1
By: Mark Sanger
May 18, 2012 · 89,626 views

Roughing out a deep end grain bowl in Ash with the Crown Revolution

 

THREAD CHASING in WOOD: TOOLS and SHARPENING
By: WYOMINGWOODTURNER
February 06, 2012 · 3,419 views

Thread chasing tools are sharpened. Tools of the turning trade are described and sharpened.

 

Thread Chasing and the Point Tool
By: WYOMINGWOODTURNER
February 01, 2012 · 10,699 views

The Point tool is historically used for various operations in conjunction with hand chasing threads. This small tool can be used in place of a parting tool, a spindle gouge, or a skew chisel. It is used when chasing threads in wood and makes it unnecessary to pick up a 2nd or 3d tool while this handy little tool will do the job.

 

The Robert Sorby Ultima
By: ian metheringham
January 22, 2012 · 1,262 views

The Sovereign Ultima Hollowing System is the latest product from the Robert Sorby factory in Sheffield. Buy online at ....http://www.turnerscabin.co.uk/index.php?main_page product_info&cPath 66_98&products_id 395

 

Spiralling and texturing tool part 2
By: ian metheringham
January 22, 2012 · 2,414 views

Adding such decorations as spirals to turned pieces was once the domain of the privileged. Now you can venture into this field and create spirals to your hearts content. Buy online now at .......http://www.turnerscabin.co.uk/index.php?main_page product_info&cPath 66_134&products_id 421

 

Spiralling and texturing tool part 1
By: ian metheringham
January 22, 2012 · 2,481 views

Adding such decorations as spirals to turned pieces was once the domain of the privileged. Now you can venture into this field and create spirals to your hearts content. Buy online now at .......http://www.turnerscabin.co.uk/index.php?main_page product_info&cPath 66_134&products_id 421

 

Robert Sorby RS200KT10
By: ian metheringham
January 22, 2012 · 2,052 views

One of the most versatile hollowing tools. Ideal for end and side grain. Will undr-cut rims. Buy online now at ....http://www.turnerscabin.co.uk/index.php?main_page index&cPath 66_98

 

Robert Sorby micro shear scrapper
By: ian metheringham
January 22, 2012 · 909 views

A look at Robert sorby shear scrapper Buy online now at ... www.turnerscabin.co.uk

 

Robert Sorby texturing tool
By: ian metheringham
January 22, 2012 · 416 views

Texturing with the Robert Sorby Texturing tool Buy online now at .....http://www.turnerscabin.co.uk/index.php?main_page product_info&cPath 66_134&products_id 422

 

Robert Sorby Fingernail Profiler
By: ian metheringham
January 22, 2012 · 471 views

Robert Sorby Fingernail Profiler

 

Robert Sorby hardwoodscraper
By: ian metheringham
January 22, 2012 · 3,170 views

The Hardwood Scraper is different in that it has a negative rake on the bevel. It is designed to reduce or eliminate tear-out of the fibres of wood leaving a highly polished surface. Buy online at........http://www.turnerscabin.co.uk/index.php?main_page product_info&cPath 66_99_137&products_id 439

 

A video guide to the Robert Sorby Spindlemaster - YouTube.flv
By: ian metheringham
January 22, 2012 · 928 views

A video guide to the Robert Sorby Spindlemaster Buy online now at ....http://www.turnerscabin.co.uk/index.php?main_page product_info&cPath 66_99_142&products_id 416

 

A video guide to the Robert Sorby Chattertool - YouTube.flv
By: ian metheringham
January 22, 2012 · 3,151 views

A video guide to the Robert Sorby Chattertool Buy online at ....http://www.turnerscabin.co.uk/index.php?main_page product_info&cPath 66_134&products_id 424

 

A video guide on the Robert Sorby Hollowmaster
By: ian metheringham
January 22, 2012 · 4,168 views

Unlike most conventional hollowing tools, the unique Hollowmaster comes with a meaty ' flat surface. It's swan neck design means that the Hollowmaster can reach those spots that are often difficult to reach. Buy on line at ...http://www.turnerscabin.co.uk/index.php?main_page product_info&cPath 66_98&products_id 200

 

Hunter Hercules tool
By: john60lucas
January 01, 2012 · 21,551 views

This video is to show how I use my spindle roughing gouge and how to cut square shoulders on a spindle.

 

Re-Shape of Turning Tool
By: Levier Fine writing Instruments
December 30, 2011 · 2,200 views

In this Video We are Changing the Geometry of a Spindle Gouge into a Detail Gouge. using the Jet Slow Speed Grinder in combination with Tormek Jigs

 

Matched Pair of Ring Centres
By: Axminster Tools & Machinery
December 20, 2011 · 2,263 views

These matched ring centres are very safe to use if you are a newcomer to woodturning. This is due to the fact that if you experience a dig in, the workpiece will stop rotating but the drive centre can continue to rotate. The drive centre works by friction so the amount of compression on the work can be adjusted to suit your needs. Another very useful feature is they allow you to swap your work end for an end which allows better access to your work in a variety of situations. BUY ONLINE NOW... http://www.axminster.co.uk/axminster-matched-pair-of-ring-centres-prod797244/ Axminster Tool Centre Freephone 0800 371822

 

ProVac Grinding Jig
By: ProVacInfo
November 12, 2011 · 261 views

Simple grinding with perfect result.

 

Robert Sorby Fingernail Profiler
By: Robert Sorby
October 27, 2011 · 21,066 views

Sharpening the ever popular fingernail gouge is a notorious issue for many woodturners -- the achievement of that elusive but effective shape often being an arduous and demoralising task. This easy to follow clip from Robert Sorby shows how easy this job is on the ProEdge sharpening system. Using the fingernail profiling arm shown in the clip the job can also be done on a traditional sharpening wheel

 

SB Woodturning: Animation Preview - The Tool Proficiency Video Series
By: SBWoodturning
September 29, 2011 · 6,135 views

To enhance your learning experience, SB Woodturning is including 3D digital animation in our Tool Proficiency Video Series.

 

Ring Master Pro Video Lathe tool
By: Peter Merritt
September 28, 2011 · 35,807 views

Ring Master Pro Video wood working tool. The secret tool of segmented bowl makers for over 30 years. Make bowls, vases and other round hollow shapes from flat boards. Go to www.ringmasterlathe.com for more information.

 

Skålstål och Skärstöd
By: ProVacInfo
September 13, 2011 · 191 views

 

ProVac Intro
By: ProVacInfo
September 13, 2011 · 651 views

Skärsvarva rent och säkert med ProVac system ProVac svarvstålet kopplas direkt till en dammsugare och du slipper städa efter dig och du behöver heller inte besväras av trädamm. Ett skärstöd som kopplas till stålet gör det möjligt för den absoluta nybörjaren att skärsvarva utan risk. Slipning av stålet är enkelt och snabbt med ProVac slipjigg. Eggstålet av HSS behåller skärpan länge tack vare den kylande luftströmmen

 

Skärstöd
By: ProVacInfo
September 13, 2011 · 894 views

Skärsvarva säkert utan risk för hugg eller kast. ProVac skärstöd ger stålet en plan undersida som stödjer mot försättaren på samma sätt som ett plant skrapande stål. Stålets egg lutar samtidigt snett mot rotationen och ger en skuren yta. Stålet tippas över på endera den högra stödytan eller den vänstra beroende på i vilken riktning man skär.

 

Slipjigg2 forts.
By: ProVacInfo
September 13, 2011 · 53 views

 

Slipjigg1
By: ProVacInfo
September 13, 2011 · 161 views

Enkel slipning med perfekt slipfas. Det kan låta som en överdrift men det är faktiskt sant. Med ProVac slipjigg blir slipfasen lika jämn varje gång och det beror inte på sliparens skicklighet. Efter att ha ställt in eggvinkeln med maskinens slipstöd kommer slipjiggens styrgördel att följa samma mönster varje varv den roteras runt i styrhylsan och därigenom ge en jämn slipfas.

 

Selecting your Easy Hollower
By: Christine Caliendo
September 05, 2011 · 22,517 views

Easy Hollower Series Picking tool sizes and shapes for your hollowing projects. Progressive Hollowing System made Easy! Contact Easy Wood Tools at www.easywoodtools.com or 859-246-0294 for more information Safety Disclaimer: Easy Wood Tools strives to offer the safest wooturning tools on the market, but you still must follow reasonable safety considerations. Our company recommends the use of full safety equipment when turning wood. Project safety is your responsibility; so please read and understand all material included with your tools and lathe. Use of Jackson Woodworking, LLC dba

 

Deluxe Chatter Tool (woodturning texturing tool)
By: Craft Supplies USA
June 06, 2011 · 17,178 views

Watch this woodturning tutorial on texturing with the Deluxe Chatter Tool. Buy now: https://www.woodturnerscatalog.com/p/49/4607/RMWoodCo-Deluxe-Chatter-Tool-6-Piece-Set?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Create stunning textures on turned boxes, bottle stoppers and more with the Deluxe Chatter Tool. The flexible metal blade vibrates (or chatters) when applied against spinning end grain resulting in unique patterns that can be varied by changing applied pressure, blade's length and blad

 

Ausdrehhaken gekrà pft zum drechseln - Drechsler
By: WiedemannHeinz
May 17, 2011 · 21,157 views

Weitere Infos finden sie unter http://www.holz-im-design.de Hier sehen Sie wie der gekröpfte Wiedemann Ausdrehhaken richtig eingesetzt wird. Diese Haken werden bei der Fertigung offener Gefäße, deren Boden als Radius ausläuft eingesetzt.

 

Robert Sorby Sovereign Ultima.wmv
By: Robert Sorby
April 20, 2011 · 31,774 views

The Ultimate hollowing tool from Robert Sorby, Sheffield, England. The micro adjust wheel gives the woodturner full control over the size of cut and ensures total controllability. A fully adjustable articulated head and link system allows for any shaped hollow form to be produced.

 

Decorating Elf by Henry Taylor
By: Craft Supplies USA
February 03, 2011 · 1,881,195 views

In this woodturning tutorial, learn how to properly use the Decorating Elf and its accessories. Buy now: https://www.woodturnerscatalog.com/p/49/5598/Henry-Taylor-Decorating-Elf-Complete-System-6-Piece-Set?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA The Decorating Elf by Henry Taylor is a unique texturing tool that allows you to create beautiful textures and patterns on wood, plastics and antler. With 3 types of interchangeable cutters to choose from, you can decorate concave, flat and convex

 

Benjamin Best tools
By: ric47scroll
January 19, 2011 · 5,004 views

A little about the quality of Benjamin tools. There are many more videos on my web site at http://www.scrollsaws.com/WoodLathe/woodlatheVideo.htm. I also have a large selections of scrollsaw videos..

 

Neues Eisen beim Testen (Fortsetzung)
By: johann340
November 19, 2010 · 7,946 views

Das Neue Eisen von der Firma Stubai nennt sich HSS Kugelschneider und kostet 136,- Es ist speziell für arbeiten, wo die Handauflage nicht mehr so nahe am Holz angebracht werden kann, wie zum Beispiel, tiefausdrehen von Hohlgefäsen und großen Schalen. Ohne Einschränkungen, kann mann das Eisen gut führen und liegt gut in der Hand. Das Negative ist, daß mann den Spanbegrenzer nach mehrmaligem Schärfen gekürzt werden muss. Es ist aber eine gute Erfindung.

 

Hunter carbide back cutting tools
By: john60lucas
October 19, 2010 · 6,365 views

This video shows how I use 2 of the Hunter back cutting tools for cleaning up the sides of vases and straight sided vessels.

 

Cindy Drozda - Sharpening the Vortex Tool for Woodturning
By: Cindy Drozda
September 03, 2010 · 11,433 views

Here is a description of how I sharpen my Signature Vortex Tool for Woodturning. Please visit my website, http://www.cindydrozda.com for more information about me, my Artwork and Woodturning Instruction. Instructional Woodturning DVDs, Signature Woodturning Tools, Supplies and Accessories for Woodturning are now available for online ordering! Questions and Comments are invited.

 

Cindy Drozda - Sharpening the Arc Tool for Woodturning
By: Cindy Drozda
August 16, 2010 · 8,700 views

In this video, I show you how I sharpen my Cindy Drozda Signature Negative Rake Arc Scraper. This tool is used for making fine finishing cuts on turned wood. You can see it in action on my Instructional Woodturning DVDs 'Fabulous Finial Box' and 'Finial Star'. Please visit my website, http://www.cindydrozda.com for more information about me, my Artwork and Woodturning Instruction. Instructional Woodturning DVDs, Signature Woodturning Tools, Supplies and Accessories for Woodturning are now available for online ordering! Questions and Comments are invited.

 

Cranked Wiedemann hook tool woodturning woodturner
By: WiedemannHeinz
August 06, 2010 · 12,792 views

Weitere Infos finden sie unter http://www.holz-im-design.de Hier sehen Sie wie der gekröpfte Wiedemann Ausdrehhaken richtig eingesetzt wird. Diese Haken werden bei der Fertigung offener Gefäße, deren Boden als Radius ausläuft eingesetzt.

 

Wiedemann Ring cutter with NoStopTool - woodturner woodturning
By: WiedemannHeinz
August 06, 2010 · 23,765 views

More Infos under http://www.holz-im-design.de Wiedemann's NoStopTool assembled to a ring cutter is the perfect choice for turning end-grain and side grain projects. It doesn't matter if you turn very thin hollow forms or if you rough out a piece, the tool never clogs up and works with all types of wet and dry wood! You can adjust the aggressiveness of the tool very easily by turning a single screw.

 

Wiedemann Ringschneider mit NoStopTool - drechseln Drechsler
By: WiedemannHeinz
August 05, 2010 · 89,726 views

Weitere Infos finden sie unter http://www.holz-im-design.de Der Wiedemann Ringschneider mit eingesetztem NoStopTool eignet sich hervorragen für die Quer- und Hirnholzbearbeitung. Besonders geeignet ist er für dünnwandige Hohlgefäse sowie große Zerspanung. Spanstärke bzw. Agresssivität kann optimal eingestellt werden. Arbeitsunterbrechungen durch verstopfen sind damit ausgeschlossen!

 

Woodturning with the Tracy Owen Finishing Tools
By: Craft Supplies USA
August 05, 2010 · 12,269 views

In this woodturning video, we'll show you how to shear scrape with the Tracey Owen Finishing Tools. Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Tracy Owen Fine Finishing Tools offer a truly innovative approach to maximizing the benefits of shear scraping. It's no secret that properly done, shear scraping can produce a silky smooth finished surface more consistently than any other turning method. In fact, beginning sanding with 220 grit abrasive is not uncommon when shear scraping is employed. Unlike traditional shear-scraping tools made of flat bar stoc

 

Straight Wiedemann hook tool woodturning woodturner, end grain
By: WiedemannHeinz
July 20, 2010 · 9,667 views

More infos under http://www.holz-im-design.de Here you can see how the straight Wiedemann hook tool should be used. The tool is ideal for turning open forms with a flat bottom.

 

Ausdrehhaken gerade zum drechseln - Drechsler Haken Hirnholz
By: WiedemannHeinz
July 20, 2010 · 22,194 views

Weitere Infos finden sie unter http://www.holz-im-design.de Hier sehen Sie wie der gerade Wiedemann Ausdrehhaken richtig eingesetzt wird. Diese Haken werden bei der Fertigung offener Gefäße, mit flach ausgedrehtem Boden eingesetzt.

 

Johannes woodturning in Denmark with the HannesTool Michelsen Grind speaking Danish
By: JoHannes Michelsen
April 08, 2010 · 5,239 views

http://HannesTool.com - Instruction on how to sharpen your woodturning tool gouge with the 'Michelsen Grind' This one is in Danish we will be uploading a similar video in English soon. So stay tuned :) thanks.

 

Üregelő horog
By: 04JANIKA
February 19, 2010 · 40,198 views

Saját készítésű kovácsolt horog

 

Woodturning Taxus.Ring.(1) .Sortija.Preparacià n ,rose engine
By: TaxusWoodturning
November 25, 2009 · 4,640 views

Torneado de una sortija.Preparación con máquina de rosetas de la parte superior.

 

Woodturning Taxus.Ring.(2).Torneado de una sortija.
By: TaxusWoodturning
November 25, 2009 · 4,031 views

Torneado de una sortija.

 

Mike Mahoney Signature Woodturning Tools by Henry Taylor
By: Craft Supplies USA
November 17, 2009 · 65,309 views

Mike Mahoney teaches you how to use his signature woodturning tools. Buy now: https://www.woodturnerscatalog.com/p/129/7017/Carter-and-Son-M42-Mike-Mahoney-Finalizer-Gouge?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Professional woodturner Mike Mahoney demonstrates his new line of signature woodturning tools from Henry Taylor Tools. Recognized as one of the world's top production woodturners, Mike Mahoney has produced thousands of bowls over the years. In his constant effort to improve his eff

 

Woodturning Taxus Woodturning (3) Desbastado,vaciado y texturizado en madera seca y verde
By: TaxusWoodturning
November 13, 2009 · 2,698 views

Desbastado, vaciado y texturizado de piezas en madera seca y verde.Vasijas de boca estrecha y jarrones.

 

 

Woodturning Taxus Woodturning (1) Torneado de madera. Bandeja
By: TaxusWoodturning
November 06, 2009 · 3,538 views

 

Robert Sorby Sovereign
By: Robert Sorby
August 17, 2009 · 17,930 views

Introduction of the Robert Sorby Sovereign. The Robert Sorby Sovereign is the most flexible handled system available offering the woodturner the widest variety of tool choice and handle size on the market. In this video Robert Sorby demonstrator Clive Brooks describes some of the latest additions to the most popular handle system on the market.

 

Axminster Matched Pair of Ring Centres
By: Axminster Tools & Machinery
May 05, 2009 · 110,637 views

These matched ring centres are very safe to use if you are a newcomer to woodturning. This is due to the fact that if you experience a dig in, the work piece will stop rotating but the drive centre can continue to rotate. The drive centre works by friction so the amount of compression on the work can be adjusted to suit your needs. Another very useful feature is they allow you to swap your work end for an end which allows better access to your work in a variety of situations. http://www.axminster.co.uk

 

Custom Woodturning Tool
By: SegmentedTurner
February 14, 2009 · 71,929 views

This is a demonstration video of my custom designed and produced woodturning tool. They're great for roughing and hollowing. For more information about my work please visit my web site at http://www.DWMontville.com.

 

Woodturning with Hollow Pro Tools - By Mike Jackofsky
By: Craft Supplies USA
February 06, 2009 · 26,681 views

This woodturning tutorial will show you how to use Mike Jackofsky's Hollow-Pro Hollowing Tools. Buy now: https://www.woodturnerscatalog.com/p/133/855/Hollow-Pro-Bent-Shaft-Hollowing-Tool?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Hollow-Pro tools innovative approach to free-hand hollow turning gives beginner and seasoned woodturners alike the tools they need to be successful. At the heart of the Hollow-Pro system is a proprietary internal swivel tip cutter assembly with razor-sharp carbide

 

Woodturning - Hook tool training
By: teksu313
October 18, 2008 · 18,050 views

I try my new hook tool to mountain ash block.

 

Woodturning with the Wagner Texturing Tool with Joe Wagner
By: Craft Supplies USA
June 05, 2008 · 408,963 views

Decorating with the Wagner Texturing Tools. Joe Wagner shows you how to use the Wagner Texturing Tools on your lathe. Learn more: https://www.woodturnerscatalog.com/p/49/3668/Wagner-Texturing-Tool?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Create eye-catching textures on spinning tops, boxes, ornaments, and other small projects. Diamonds, spirals, swirls and other textures will add interest and value to your work along with added enjoyment while you turn. Designed by Joe Wagner of Salt Lake C

 

Woodturning with Easy Wood Tools Easy Rougher
By: Craft Supplies USA
May 16, 2008 · 56,019 views

Turning with the Easy Rougher with Craig Jackson from Easy Wood Tools. Enjoy! Buy now: https://www.woodturnerscatalog.com/Sales/8/Easy-Wood-Tools?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Easy Wood Tools innovative approach to woodturning has made their tools very popular with woodturners of all skill levels. By reducing the 'getting started' learning curve to only a few minutes and eliminating the need to sharpen, Easy Wood tools will have you peeling wood away effortlessly in only minutes. A

 

HannesTool Michelsen Grind woodturning wood turning Hannes Tool Gouge
By: JoHannes Michelsen
May 14, 2008 · 29,432 views

http://www.hannestool.com An Intro to the unique Michelsen Grind by Johannes Michelsen The Originator of the Woodhat and the new HannesTool high quality woodturning tools, the HannesTool ergonomic handles and A11 steel tempered cryogenically treated. Wood Turning Tools woodturning tool Gouge ergonomic handle woodworking hobby hobbies carving Michelsen Grind Wood Turning Tool woodturning tools ergonomic gouge handle woodworking hobby hobbies carving Michelsen Grind Jet tool grinder powermatic lathe michelsenshop woodworking equipment machines lathes sharpening sharpen sharp-tools sharpening-tools

 

HannesTool The Ultimate Ergonomic Woodturning Tools Premium Quality Tool for wood turning
By: JoHannes Michelsen
February 16, 2008 · 36,752 views

http://www.HannesTool.com Johannes Michelsen Introduces the new HannesTool woodturning lathe tools. Johannes Michelsen has been making lathe turned woodhats for 20 years and for 14 years before that all kinds of other woodturnings. In all that time he could not help but ponder what would make this a better experience. And the answer is a better tool a tool with serious ergonomic considerations and intentions. And that is this tool the HannesTool. - Large handle 22.5' long with TPE molded on1″od aluminum - Small Handle 20″ long is TPE molded on ' aluminum tube with ' id - Both

 

Hollowing & box making with the Robert Sorby Multi tip tool
By: Robert Sorby
February 14, 2008 · 78,752 views

Hollowing & box making with the Robert Sorby Multi tip tool (RS200KT) The Robert Sorby RS200KT Multi-Tip Tool is a handy addition to any tool kit. It comes complete with three replaceable cutters - two for hollowing, one for scraping. Of the two hollowing cutters, the one with the rounded end is designed for general roughing out and will create a flowing curve as in the bottom of a vessel. The more pointed cutter is for fast material removal and also produces a crisp corner in a box.

 

Creating beads & coves with the Robert Sorby Multi tip tool
By: Robert Sorby
February 14, 2008 · 31,986 views

Creating beads & coves with the Robert Sorby Multi tip tool (RS200KT) The Robert Sorby RS200KT Multi-Tip Tool is a handy addition to any tool kit the bead and cove forming cutters make easy work of creating beads and coves.

 

A video guide on the Robert Sorby micro shear scraper
By: Robert Sorby
February 14, 2008 · 25,103 views

A video guide on the Robert Sorby micro shear scraper. This beautifully balanced system makes it ideal for those who work primarily on mini or midi lathes or those who specialise in miniature pieces. The Micro Spindle Set can be used extensively for pen turning with additional external decoration provided by the Micro Spiralling Tool. It has proved highly popular with woodturners the world over.

 

A video guide on the Robert Sorby Hollowmaster
By: Robert Sorby
February 14, 2008 · 48,267 views

A video guide on the Robert Sorby Hollowmaster The Robert Sorby Hollowmaster has a flat underside which provides exceptional control and stability when hollowing and is suitable for end grain and bowl work. It is supplied with two interchangeable tips for hollowing and scraping.

 

A video guide to the Robert Sorby Chattertool
By: Robert Sorby
February 14, 2008 · 26,080 views

A video guide to the Robert Sorby Chattertool. Chattertool patterns add a neat, random decoration on end grain like box lids. These are created by using the Robert Sorby chattertool which comes with two different double-ended chattering tips and a handy scraper cutter.

 

Robert Sorby texturing tool
By: Robert Sorby
January 28, 2008 · 71,865 views

Texturing with the Robert Sorby Texturing tool. This is a remarkable adaptation of an engineer's knurling tool. It consists of a handle, blade and a double bevelled texturing cutter with integral bearing. It can be used to create unique effects that alter the tactile and visual qualities of your bowls, hollow forms, goblets or boxes perfect for adding that individual mark to your work. Orange peel, striated and ribbed patterns are possible using this tool.

 

Spiralling and texturing tool part 2
By: Robert Sorby
January 28, 2008 · 273,451 views

Adding such decorations as spirals to turned pieces was once the domain of the privileged. Now you can venture into this field and create spirals to your hearts content. The Robert Sorby Spiralling System is a further development on the texturing tool and is used to create both left and right handed spirals with ease. It features an innovative rest with indexed reference positions, which enable the replication of the spirals. Differing pitch and twist profiles are made possible by altering the presentation angle of the cutter or by changing the cutter to a different one. Spiralled pieces The texturing tool is part of the system as well as a graduated rest, 2mm, 4mm and 6mm spiralling cutters. There are 5mm and 11mm cutters available as optional extras. With these you can spiral goblets, candle holders, boxes, vases, bowls and spillikins.

 

Spiralling and texturing tool part 1
By: Robert Sorby
January 25, 2008 · 44,566 views

Adding such decorations as spirals to turned pieces was once the domain of the privileged. Now you can venture into this field and create spirals to your hearts content. The Robert Sorby Spiralling System is a further development on the texturing tool and is used to create both left and right handed spirals with ease. It features an innovative rest with indexed reference positions, which enable the replication of the spirals. Differing pitch and twist profiles are made possible by altering the presentation angle of the cutter or by changing the cutter to a different one. Spiralled pieces The texturing tool is part of the system as well as a graduated rest, 2mm, 4mm and 6mm spiralling cutters. There are 5mm and 11mm cutters available as optional extras. With these you can spiral goblets, candle holders, boxes, vases, bowls and spillikins.

 

Return to Turning Videos

Powered by Google

Great Bargains


Mini Ergonomic Carbide Turning Tools, 3-Piece Set

On Sale for only $129.99

Save $90.00

List price: $219.99

Click here for more information or to purchase


3-Piece Silicone Glue Application Kit

On Sale for only $11.99

Save $3.00

List Price: $14.99

Click here for more information or to purchase

 


Wall-Mount Dust Collector, 650 CFM

On Sale for only $249.99

Save $20.00

List price: $269.99

Click here for more information or to purchase


SuperMax 16-32 Drum Sander

On Sale for only $1079.10

Save $119.90

List Price: $1199.00

Click here for more information or to purchase

 


Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Woodturning Online
Cindy Drozda
Backgate

(Click any Ad to go to our Sponsor's Website)