Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Miscellaneous Videos (1044)

Sort by

Or click here to: Search All Videos


Woodcarving a Buffalo Skull - Halloween Bonus
By: Jim Overton - Jimson's Stuff
October 28, 2018 · 1,606 views

In this video I finish carving a Cape Buffalo skull that I roughed out six years ago, before I had a YouTube channel. The birth of my daughter put a lot of these projects on hold. I decided to finish this following the success of my last carving video and numerous requests for more carving videos. The skull is carved from English Boxwood and the horns are carved from African Blackwood. The spiky burrs are Saburrtooth. Carving knives are by Flexcut. Easy Wood Tools carbide turning tools http://www.easywoodtools.com/ Available in the UK from Yandles http://www.yandles.co.uk/ Makers Central 2019

 

Turning a Halloween Pumpkin/Jack O Lantern Hollow Form: Part 1
By: Nathan Cumming
October 28, 2018 · 225 views

In this video I turn a Halloween Pumpkin/Jack O Lantern from a large piece of seasoned Elm with accents in Walnut. The pumpkin measures 10' in diameter and 5' high and is fully hollowed on the inside. The handle is turned from a piece of Walnut and stands roughly 4' high. The facial features were cut and carved using a drill, coping saw and a variety of files. The entire piece is finished with a mixture of Tung oil and resins. I hope you enjoy watching the turning of this Halloween Pumpkin. As always, thank you to all my Subscribers for your continued support. Please like and share this video along with my channel and help me continue to grow my channel following.

 

Turning Ebonite Bowling ball Material
By: SP Wood Art
October 26, 2018 · 393 views

This is a great video for anyone looking for an alternative media to wood turn. For the first time, I will attempt to turn ebonite material. I also show how I finish this material for a twist ballpoint pen. Please enjoy this addition to our video liberary. If you would like see more of SP Wood Art visit us at: https://www.etsy.com/shop/SPWoodArt -ETSY Store http://spwoodart.wixsite.com/spwoodart - Home https://www.facebook.com/spwoodart - Facebook https://plus.google.com/ SPWoodArt1 - Google Plus https://www.pinterest.com/spwoodart/ - Pinterest https://www.amazon.com/shop/spwoodart - Amazon

 

Woodturning Patagonian Rosewood
By: R Humphrey
October 26, 2018 · 8,535 views

Wood turning Patagonian Rosewood. A wood that is super hard, really heavy, and quite pretty. Orange wood fit for an October turning. Thanks for watching! If you haven’t already, please subscribe and help my channel grow. I upload quality project videos almost every Friday. If you like what you see here, I’d sure appreciate the support. Facebook username @RHumphreyWoodworking Instagram RHumphrey_Woodworking Email me at rhumphrey.woodworking@gmail.com Or contact me at Rod Humphrey PO Box 159 Chesterfield, IN 46017 (It does work, I am receiving mail )

 

EPISODE 9 - TURNING the GROOVE JR - Spalted Green Tamarind Bottle
By: Turning the Groove
October 21, 2018 · 39 views

In this episode the chisels get handed over to the next generation of turners and a nice little bottle comes into shape. Sit back and enjoy some nice tracks and light-hearted groovin!

 

Beautiful set of 3 Indian Rosewood darts - Custom order
By: FireFly Goods
October 21, 2018 · 3 views

Tuned these this last week and they turned out amazing. Going out as a gift for a lucky customer. The holiday season is coming up on us. Time to order your gifts for that special person. Check out all of the unique items we have via fireflygoods.etsy.com today !

 

3 Tone Indian Rosewood Darts
By: FireFly Goods
October 21, 2018 · 1 views

Interesting mix of Indian Rosewood darts. The blanks each had a slightly different tone to them. They turned out looking amazing and compliment each other very well.

 

Can I make something scary for Halloween using skateboards?
By: Nick Zammeti
October 19, 2018 · 58,895 views

Charlie The Maker (My Son's Channel) https://goo.gl/kSViJv Makers Central 2019 https://www.makerscentral.co.uk/HOME Nick Zammeti/ Instagram https://www.instagram.com/nickzammeti Nick Zammeti Personal Instagram https://www.instagram.com/zammeti My Website http://www.nickzammeti.co.uk The Epoxy Art Resin I Use http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ Come follow me on Twitter https://twitter.com/nickzammeti Check out my Facebook Page https://www.facebook.com/nickzammeti/ MUSIC PROVIDED BY http://www.epidemicsound.com/ ……………………………………

 

Bottlebrush - Il fiore e la penna
By: Livio Maritati
October 17, 2018 · 504 views

Con una lavorazione paziente e meticolosa è possibile ricavare una penna originale e unica da un fiore rosso scarlatto di Callistemon.

 

JINGLE ALL THE WAY...
By: CL Woodturning
October 11, 2018 · 100 views

Potentially annoying...but she’ll love it

 

Jak powstają plugi z hematytem
By: DrewnianySzejk
October 09, 2018 · 42 views

Krótki film pokazujący jak powstają plugi z hematytem w mojej pracowni :) Zapraszam na moje sm: https://www.facebook.com/drewniany.szejk/ https://instagram.com/drewniany.szejk

 

Out of Round-Marshmallows
By: woodturningwithtim1
October 08, 2018 · 3,108 views

for the fun of it... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Woodturning - Bocote and Maple Pool Cue
By: Carl Jacobson
October 07, 2018 · 10,064 views

This was my first time making a pool cue. I got the kit from schmelkecue cues, they have all the pieces if you want to make your own. I used Bocote and Maple the total length of the pool cue is 59'. Pool Cue kits https://schmelkecue.com/ Christmas Ornament Challenge 2018 http://www.aswoodturns.com/ I put together a list of some of the tools I use in my shop (affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link: https://www.amazon.com/shop/thewoodshoptv Carolina Shoe: https://www.carolinashoe.com/Products?page 1&gender Mens&sorting Popularity Use

 

The Great Stumpkin
By: woodturningwithtim1
September 30, 2018 · 8,674 views

Tim takes a tree stump and turns it in to a one piece pumpkin...or as we call it..a stumpkin! It's an homage to one of our favorite Halloween specials..It's the Great Pumpkin Charlie Brown. This episode has it all...turning, carving and fire! You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://wtwtim.com/robustlathes.htm I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Spittoon # 147 the hard way
By: The Wood Whirler
September 26, 2018 · 1,878 views

This was a long hard turning that started as one thing and ended up being something totally different. With a couple fails.

 

Hour glass project...
By: JR turn it around
September 21, 2018 · 27 views

hour glass project i made. hope you enjoy... Yorkshire grit http://yorkshire-grit.com/ Sanding sealer https://chestnutproducts.co.uk/product/cellulose-sanding-sealer/ Woodwax 22 https://chestnutproducts.co.uk/product-category/waxes/ lathe and tools and chuck http://www.recordpower.co.uk

 

How To Make A Live Edge Trivet
By: madronawoodworks
September 20, 2018 · 3,194 views

Perhaps the world's first, live edge trivet! LOL! Just a scrap cut off the end of a log, but I think it will be useful and even look good as it does it's job! My Shop Page: https://www.facebook.com/Phils-Woodshop-1470648929819551/ For YouTube Only: End grain Turning, Phil Anderson Woodturner, Shady Acres Wood Shop, Shady Acres Woodshop, Phil's Woodshop, Turned Cherry Wood Natural Edge, Wood Lathe, Jet Lathe 1840, Woodturning, Wood Turning Ideas, Wood Lathe Ideas,

 

Bocote Darts - set of 3 - Birthday gift for Maroon
By: FireFly Goods
September 17, 2018 · 13 views

These were ordered for a customer for a birthday gift from someone. If you are looking for a gift to give these darts are a great item. Find a set like it here: https://www.etsy.com/listing/508591910/hand-turned-darts-custom-hardwoord

 

Bocote darts - set of 3
By: FireFly Goods
September 17, 2018 · 4 views

Set of darts ready to ship. Just turned this set and they are sitting in the 'stock' pile ready to weight, assemble and ship. Order a them today by clicking here: https://www.etsy.com/listing/508591910/hand-turned-darts-custom-hardwoord

 

47 - Vacuum Chamber from an Asparagus Pot?
By: Bill Rockwood
September 11, 2018 · 188 views

In this video I share my home-built vacuum chamber system for stabilizing wood. Ad-free and family friendly. Fittings for chamber lid and Cactus Juice: www.turntex.com

 

Sharpen up ready to TURN
By: Nick Burt Woodturning
September 09, 2018 · 11 views

Learn to Turn. Maple

 

Black Ebony darts set of three (Replacement for matched third dart)
By: FireFly Goods
September 08, 2018 · 1 views

How would you like to own a beutiful set of custom hand turned darts just like these? Click here: https://www.etsy.com/listing/521460783/hand-turned-darts-custom-hardwoord All sets are turned to order and are weighted as desired. Just pick the wood type and weight and they will be on their way to you within a few days!! Includes steel tips AND soft tips with every set !! The holiday season is right around the corner and there is always a gift need to fulfill. These darts make a GREAT option for the darter you know. We also do custom racks and can offer custom flights in some instances. Find us today via FireFlyGoods.com !!

 

Red, White and Blue laminated wood darts - custom order - set of 3
By: FireFly Goods
September 08, 2018 · 8 views

This was a special order for a customer's boyfriend. She also got custom flights to celebrate his job as a linesman for a utility company as well. Very much enjoyed working with her to get the perfect set to surprise him with. I have additional sets Red, White and Blue darts ready to turn right now...order yours today. Click here: https://www.etsy.com/listing/521460783/hand-turned-darts-custom-hardwoord All sets are turned to order and are weighted as desired. Just pick the wood type and weight and they will be on their way to you within a few days!! Includes steel tips AND soft tips with every set !! The holiday season is right around the corner and there is always a gift need to fulfill. These darts make a GREAT option for the darter you know. We also do custom racks and can offer custom flights in some instances. Find us today via FireFlyGoods.com !!

 

Olivewood Darts - set of three
By: FireFly Goods
September 08, 2018 · 3 views

How would you like to own a beutiful set of custom hand turned darts just like these? Click here: https://www.etsy.com/listing/521460783/hand-turned-darts-custom-hardwoord All sets are turned to order and are weighted as desired. Just pick the wood type and weight and they will be on their way to you within a few days!! Includes steel tips AND soft tips with every set !! The holiday season is right around the corner and there is always a gift need to fulfill. These darts make a GREAT option for the darter you know. We also do custom racks and can offer custom flights in some instances. Find us today via FireFlyGoods.com !!

 

olivewood darts - set of three
By: FireFly Goods
September 08, 2018 · 3 views

How would you like to own a beutiful set of custom hand turned darts just like these? Click here: https://www.etsy.com/listing/521460783/hand-turned-darts-custom-hardwoord All sets are turned to order and are weighted as desired. Just pick the wood type and weight and they will be on their way to you within a few days!! Includes steel tips AND soft tips with every set !! The holiday season is right around the corner and there is always a gift need to fulfill. These darts make a GREAT option for the darter you know. We also do custom racks and can offer custom flights in some instances. Find us today via FireFlyGoods.com !!

 

Woodturning A Large Wooden Eyeball
By: Colbe Pease Woodworking
September 07, 2018 · 302 views

This video was inspired by frank howarth. when I saw his video of the eye he made I knew I had to give it a try.

 

Woodturning The Cross
By: ThePapa1947
September 07, 2018 · 191 views

I turn a cross from a pine limb. This is far from an original idea and I have watched a few videos of doing this. The most recent is from a fine wood turner who makes very entertaining videos. I am learning a lot about making videos watching his. Check out madronawoodworks here on YouTube

 

EPISODE 5 - TURNING THE GROOVE [b-sides *special* Charity Auction episode]
By: Turning the Groove
September 03, 2018 · 62 views

In this episode a gorgeous piece of Spalted Green Hackberry is turned down into a sleek vessel and topped off with a Honey Locust finial. Because there were cracks, epoxy was used to close up the form into a continuous piece. Sit back, relax, and turn it UP!

 

Woodturning a design element - sound reflaction !
By: Kostas Annikas Deftereos
September 01, 2018 · 1,727 views

After a long time I find the time to create a video ! because I was tired from the bowls that I make for my store all the summer I was like to do some experiment project with a piece of wood that was long time on my workshop and I didn't use ! I hope you find it interesting and get some ideas !! I also give you an idea about my demo on the ghost village festival 'Saristra ' ! Have a great week and amazing month ! we will speak again next Sunday!!!

 

Wood turning - Quick and basic yet interesting project for beginners
By: CraftWithAfshin
August 30, 2018 · 1,762 views

 

O torneiro que calculava
By: Joabe Bomfim
August 30, 2018 · 690 views

Peça torneada usando a técnica da secante.

 

Just a quickie
By: Rich McNatt
August 29, 2018 · 385 views

 

Magic woodturning
By: Joabe Bomfim
August 26, 2018 · 1,142 views

 

Out of Round- Nerf Football
By: woodturningwithtim1
August 24, 2018 · 5,855 views

for the fun of it... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Roberts Drechselbude - Kluepfl aus Buche
By: Roberts Drechselbude
August 24, 2018 · 69 views

Heute mal ein einfaches Projekt. Ich hatte noch einen Rundstabrest aus Buche aus einem anderen Projekt rumliegen. Kurz entschlossen einen Holzklüpfl - oder wie immer man das nennen mag - gedreht. War auch zum Ausprobieren der neuen Kamera gedacht. Zusätzlich hab ich jetzt auch noch ein neues Converter-Programm. Da kann ich hoffentlich in Zukunft noch bessere Videos drehen.

 

EPISODE 4 - TURNING the GROOVE [b- sides 1 - Ambrosia Maple]
By: Turning the Groove
August 19, 2018 · 70 views

This is a wonderful piece of Ambrosia Maple - that actually looks more like curly maple - turned into a nice little bowl. This is my first shot at showcasing the turning process itself - layed over nice tracks of course!

 

Bocote Darts - Set of 3 - Custom turned - 21g
By: FireFly Goods
August 13, 2018 · 3 views

Bocote Darts - Set of 3 - Custom turned - 21g Pulling out of town heading to Florida for a few days to work and, of course, I get an order...managed to get back and get them turned and shipped with in the 5 day window. This is what makes my shop so unique. I can make things happen when they need to happen. If you have a special request or a special order just contact me and I will do everything in my power to make your request happen.

 

Woodturning at 54a #140. Some Sea Urchins
By: Keith Barrow
August 11, 2018 · 2,705 views

Inspired by Cindy Drozda,I finally get round to buying a few Urchins and have a play with a few diferent ideas. For Seggys,Centre finders and the new pen blank centre finder,please visit my website; www.woodturningat54a.com David the Walsall Woodturner: https://www.youtube.com/channel/UCGbhsg0N-vctFqCDfq6ynIQ Cindy Drozda: https://www.youtube.com/user/cindydrozda Yorkshire Grit: www.yorkshire-grit.com

 

Black Walnut Darts - Custom set of 3 - 19g.
By: FireFly Goods
August 07, 2018 · 6 views

Reclaimed Black Walnut turned into a beutiful set of 3 darts. Custom darts available via FireFlyGoods.com !!

 

Woodturning Cable Keeper - Simple Look - ?? Execution
By: As Wood Turns
August 03, 2018 · 1,581 views

http://www.AsWoodTurns.com I had an idea to make a cable keeper - the doodad that manages computer cables. But what is a wood turned cable keeper? First decision is to make the hole big enough for an electrical plug - so how about 1.75 inches. Then, is the hole offset from center - a multi-axis turning? If not, how to mount it since there are no disctinct corners to hang on to. My cable keeper is ash about 4 inches in diameter finished with walnut oil. Is it simple? Is it difficult? How to mount this wood? Is this worth a video? Enjoy! Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Traumerei by Shumann performed by Becky Schlappi. Used with permission.

 

EPISODE 3 - Australian Red Coolibah Burl
By: Turning the Groove
August 01, 2018 · 127 views

Episode 3 - In this episode I not only select some tasty tracks but also make a selection from three different burls - The Australian Red Coolibah wins! Sit back, relax and watch the dust fly and the color explode!

 

Ruedas para Carretilla, Parte 4
By: Daniel Vilarino
July 26, 2018 · 2,572 views

Hola/Hi! ***This video is in Spanish, if you prefer to watch it in English, please click in the following link:*** https://youtu.be/TX9DeL3-FMw Este video está en Español. Este es el cuarto y último episodio de la serie de las ruedas para carretilla para Jacqueline y Ariel. ***This is the fourth and last episode of the series of the wheels for the wheelbarrow for Jacqueline and Ariel.*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this video and if that was the case, please make co

 

Wheels for Wheelbarrow Part 4
By: Daniel Vilarino
July 26, 2018 · 538 views

Hola/Hi! Este video está en Inglés, si prefieres verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/KZ46m3yVSwo ***This video is in English*** Este es el cuarto y último episodio de la serie de las ruedas para carretilla para Jacqueline y Ariel. ***This is the fourth and last episode of the series of the wheels for the wheelbarrow for Jacqueline and Ariel.*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this video and if that was the case, please make

 

Woodturning - The Fortnite Rocket - from the game Fortnite.
By: Nick Zammeti
July 13, 2018 · 41,002 views

Nick Zammeti Instagram https://www.instagram.com/nickzammeti Nick Zammeti Personal Instagram https://www.instagram.com/zammeti Dancing Fortnite Clips by Kreachure https://www.youtube.com/channel/UCzlKH5vnjm_DkIF5P7osrrQ My Website http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.recordpower.co.uk/ ………………………………………………………………………………………

 

Woodturning - USB Thumb Drive - 128
By: Roweville Retro
July 08, 2018 · 51 views

This week, I take a USB thumb drive, and create a new case for it. Music from http://www.gosoundtrack.com, under Creative Commons Attribution License: https://creativecommons.org/licenses/by/4.0

 

bethlehem olivewood darts july 2018
By: FireFly Goods
July 06, 2018 · 19 views

Custom darts - Hand turned - Hardwood, custom weight, precision turned competition darts, Steel Tip AND Soft Tip INCLUDED FREE!! (set of 3) Click to purchase: https://www.etsy.com/listing/23954111... Welcome to the FireFlyGoods.com - Youtube Channel ! What you are watching are videos of various items (mostly darts) that I have turned in my tiny workshop. I have some rogue processes and oddball way of doing things, but in the end the products are top notch and will last a long time if well taken care of. If you are interested in ay of our items I have links below and watch all of our video

 

indian rosewood darts july 2018
By: FireFly Goods
July 06, 2018 · 11 views

Custom darts - Hand turned - Hardwood, custom weight, precision turned competition darts, Steel Tip AND Soft Tip INCLUDED FREE!! (set of 3) Click to purchase: https://www.etsy.com/listing/23954111... Welcome to the FireFlyGoods.com - Youtube Channel ! What you are watching are videos of various items (mostly darts) that I have turned in my tiny workshop. I have some rogue processes and oddball way of doing things, but in the end the products are top notch and will last a long time if well taken care of. If you are interested in ay of our items I have links below and watch all of our video

 

woodturning # 110 wooden bonsai pot
By: Woodslee Summercraft
July 03, 2018 · 3,929 views

this 10' x 2 1/2' douglas fir bonsai pot is from old wood from a huge vinegar barrel that was in service at Heinz Canada in Leamington for approx 80 years, this piece of wood has 144 growth rings on it. i burnt lichtenburg figure on the outside of the bowl and coated it in 2 coats of resin i hope you like it and are inspired to do something similar visit https://templeboyturnings.com/ for live auction curing friends campaign music from http://freemusicarchive.org/ Josh Woodward - stars collide https://creativecommons.org/licenses/ please visit my website http://www.woodsleesummercraft.ca

 

Make a Finish Jar – Part 1
By: Mike Peace Woodturning
June 29, 2018 · 3,276 views

I am going to show you how to make a finish jar with a woodturned lid with a built in brush which is useful for storing your brush on finish. One lid is a turning fail. Having a brush mounted to the lid makes it easy to apply the finish and the airtight lid keeps the finish fresh. I show several tips and techniques as I make two different sizes. I also use a large version for my green wood sealer. Click here for Part 2 https://youtu.be/kyZOWPUmljE I upload new wood turning videos regularly so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.co

 

Make a Finish Jar – Part 2
By: Mike Peace Woodturning
June 29, 2018 · 3,383 views

I am going to show you how to make a finish jar with a woodturned lid with a built in brush which is useful for storing your brush on finish. One lid is a turning fail. Having a brush mounted to the lid makes it easy to apply the finish and the airtight lid keeps the finish fresh. I show several tips and techniques as I make two different sizes. I also use a large version for my green wood sealer. Click here for Part 1 https://youtu.be/vhN24ZU6pZw I upload new wood turning videos regularly so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.co

 

woodturning - a pencil timer to create pencils in time!
By: Nick Zammeti
June 29, 2018 · 284,870 views

Pencils In Time On E bay Here https://www.ebay.co.uk/itm/283030526901 Nick Zammeti/Instagram https://www.instagram.com/nickzammeti Nick Zammeti Personal Instagram https://www.instagram.com/zammeti My Website http://www.nzwoodturning.co.uk/ Slow Motion Camera / Sony RX100VI https://www.sony.co.uk/electronics/cyber-shot-compact-cameras/dsc-rx100m4 CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ MY LATHE, SANDER & BAND S

 

Woodturning website 3
By: Eric Godwin
June 28, 2018 · 18 views

 

Not without trying by Al Furtado
By: Rebel Turner
June 24, 2018 · 4,516 views

Piece comes back to the lathe due to popular demand.

 

STartagliaCigarAshTray
By: West Island Woodturners
June 19, 2018 · 24 views

Stephanne Tartaglia makes an ash tray worthy of the finest cuban cigar

 

Oak Wheels for my rolling tool bag
By: Tod Raines
June 18, 2018 · 69 views

Produced by Tod Raines of Woodturning Tool Store on March 1, 2018 This video shows how I made replacement wheels made of oak for my rolling tool bag out. I use this tool bag a lot for carrying my turning tools to club demos, open shops, and other turning events. Time will tell how these last. Visit Woodturning Tool Store https://woodturningtoolstore.com Social media links Facebook: https://www.facebook.com/woodturningtoolstore Google : https://plus.google.com/ TodRaines Instagram: https://www.instagram.com/traines64

 

bethlehem olivewood darts
By: FireFly Goods
June 18, 2018 · 4 views

Bethlehem Olivewood Darts All of our darts come with BOTH soft and hard tips. This part of the process never changes though. If you would like a set like this click the link below: http://etsy.me/2nt2h8w _____________ Thank you for taking a moment to stop in and watch some of our YouTube.com videos. My wife and I love the craft(s) and hope you can get some entertainment out of the videos that are posted. As time allows I will expand on the videos and even begin producing tutorials and 'how-to' videos.

 

Can Koozie With A CA FInish
By: Carl Jacobson
June 15, 2018 · 11,153 views

I turned this koozie on the lathe out of quilted Maple and finished it with CA glue. This is a easy turning project that can be done in a few hours. I got the koozie kit from Woodcraft and finished it with Starbond CA glue. Tools used in this video ------------------------ Lathe Robust: http://www.turnrobust.com/ Easy Wood Tools: http://www.easywoodtools.com/ Koozie kit: https://www.woodcraft.com/products/custom-koozie-kit-red Starbond CA: https://www.starbond.com/ Sandpapper and buffing pad: https://woodturnerswonders.com/ Hand Saw Drill forstner bit I put together a list of some of the to

 

She said I couldn't do it
By: Rich McNatt
June 14, 2018 · 39,694 views

Making a Lazy Susan with NO hardware.

 

Re-modernising an old lantern i got from a boot sale- mixed with a waffle
By: Nick Zammeti
June 13, 2018 · 36,037 views

Nick Zammeti NZ Woodturning Instagram https://www.instagram.com/nickzammeti/?hl en My Personal Nick Zammeti Instagram Page https://www.instagram.com/nickzammeti MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw AH Bespoke https://www.youtube.com/channel/UCwI1UJpvNf54EGs9pbIE9sA The Blind Woodturner https://www.youtube.com/channel/UCkkxNOUNP8kNT7Gvpc1MjJg THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ MY LATHE, SANDER & BAND SAW

 

Woodturning - Business Card Holder (Great Scrap Wood Project!)
By: Woodturner Ky
June 08, 2018 · 1,197 views

Here is a great skill builder project, and a great way to use up some of the scrap pieces of wood you have laying around! Great for gifts or craft shows! Recent Videos: Oil Diffuser: https://www.youtube.com/watch?v D-aE6jygvrM Butternut Peppermill: https://www.youtube.com/watch?v s8Z1VdZObUU Chokecherry Bowl (Hits me in the Face) https://www.youtube.com/watch?v f5YMgrEgxxE

 

Ye Old Wooden Cross
By: madronawoodworks
June 07, 2018 · 1,862 views

I saw Mike Peace's video, had a piece of wood I thought would be perfect for this project, and turned Ye Olde Wooden Cross as a gift for my wife. Please Like, Subscribe and Share, if you are so inclined. Woodshop Page: https://www.facebook.com/Phils-Woodshop-1470648929819551/ Mike Peace's Video: https://www.youtube.com/watch?v y2Y4cWa92Cw&t 55s

 

Carpenter bee trap made on lathe
By: Sawdust and Shavings
June 06, 2018 · 70 views

Just a fun little project to try and deal with my current bee problem that I thought I would share. Let me know if you would like to see a longer more detailed video in the comments. If there is enough interest I will either make a new video or reedit this one to show the details. Editing done with power detector and GoPro Quick Music from GoPro Quick app, song Rocksteasy by Houdini

 

Wheels for Wheelbarrow Part 3
By: Daniel Vilarino
June 04, 2018 · 551 views

Hola/Hi! Este video está en Inglés, para verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/ZBRwCNYuqg0 ***This video is in English*** Esta es la tercera parte de una serie de videos para realizar unas ruedas de madera para una carretilla estilo antiguo para mis amigos, Ariel y Jacqueline. En este tercer episodio, realizo el torneado de todos los elementos que requieren perfilado, incluyendo los rayos de las ruedas, el eje que conecta ambas ruedas, las patas y el asa de la carretilla. ***This is the third part in a series of videos to make wooden wheels for a o

 

Woodturning - Essential Oil Diffuser (Great Gift Or Craft Show Item!)
By: Woodturner Ky
June 01, 2018 · 1,554 views

In this video we turn an Essential Oil Diffuser. Just add a few drops of your preferred fragrance into the body, replace the stopper (finial), and the fragrance will slowly emit from the wood! Recent Videos: Butternut Pepper Mill: https://www.youtube.com/watch?v s8Z1VdZObUU Diseased Chokecherry Bowl (Mishap and Redemption): https://www.youtube.com/watch?v f5YMgrEgxxE Butternut Vase: https://www.youtube.com/watch?v 5xxKxCQmVNM Napkin Rings: https://www.youtube.com/watch?v dL0bO3RvYfA Thinned Beeswax Finish for Buffing May be applied on the lathe or hand rubbed. Ingredients: 1 Part Beeswax (Oz by weight) 1 Part Mineral Spirits (Oz by Volume) Slowly heat the beeswax in a DOUBLE BOILER until it melts. To increase the melting rate, break or grate into smaller chunks before hand. Add Mineral Spirits and mix thoroughly.

 

Conductor's Baton
By: Peaceful Woodturner
May 26, 2018 · 40 views

I made this conductor's baton for a friend. It should probably be a little thinner, but he liked it! All my videos are me sharing my journey as I learn this art form. I am a student, not a teacher and in no way an expert. Please take time to read, learn, and study so you can be safe! Use and wear all appropriate safety equipment including head protection, face shield, and respiratory protection. Thank you for joining me on this journey! Facebook: https://www.facebook.com/PeacefulWoodturner/ Twitter: @WoodturnerPeace

 

Wheels for Wheelbarrow Part 2
By: Daniel Vilarino
May 25, 2018 · 821 views

Hola/Hi! Este video está en Inglés, para verlo en Español, por favor dar un click en el siguiente enlace: https://youtu.be/EkCk6kmtn1M ***This video is in English*** Esta es la segunda parte de una serie de videos, donde tornearé las ruedas para una carretilla estilo antiguo para mis amigos Ariel y Jacqueline. El proyecto lo haremos en conjunto con Ariel, él va a hacer la caja de la carretilla y las piezas planas y yo voy a hacer los torneados, incluyendo las ruedas, el eje, el asa y las patas traseras. En esta segunda parte, voy a tornear los bujes y los aros. ***This is the second of a ser

 

Ruedas para Carretilla Parte 2
By: Daniel Vilarino
May 25, 2018 · 3,633 views

Hola/Hi! ***This video is in Spanish, to watch it in English please click on the following link:*** https://youtu.be/vHA2Uod0wLY Este video está en Español. Esta es la segunda parte de una serie de videos, donde tornearé las ruedas para una carretilla estilo antiguo para mis amigos Ariel y Jacqueline. El proyecto lo haremos en conjunto con Ariel, él va a hacer la caja de la carretilla y las piezas planas y yo voy a hacer los torneados, incluyendo las ruedas, el eje, el asa y las patas traseras. En esta segunda parte, voy a tornear los bujes y los aros. ***This is the second of a series of se

 

Turned Cross Revisited - Missing Footage and More
By: Mike Peace Woodturning
May 22, 2018 · 2,869 views

I reshot the missing footage on using a bandsaw to trim a turned cross. I also talk about the Community tab, my virtual live demo setup, my Amazon shop and more. I upload new wood turning videos regularly so Ya’ll come back, hear? Here is a link to the original video on Dean's Woodworking that provided the inspiration https://www.youtube.com/watch?v BejGrBTzidE Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Indian Rosewood - Custom Darts - Set of 3 - FireFlyGoods.com
By: FireFly Goods
May 21, 2018 · 12 views

Custom darts - Hand turned - Hardwood, custom weight, precision turned competition darts, Steel Tip AND Soft Tip INCLUDED FREE!! (set of 3) Click to purchase: https://www.etsy.com/listing/239541117/custom-darts-hand-turned-hardwood-custom Welcome to the FireFlyGoods.com - Youtube Channel ! What you are watching are videos of various items (mostly darts) that I have turned in my tiny workshop. I have some rogue processes and oddball way of doing things, but in the end the products are top notch and will last a long time if well taken care of. If you are interested in ay of our items I have

 

Gocalo Alves - Custom Darts - Set of 3 - FireFlyGoods.com
By: FireFly Goods
May 21, 2018 · 10 views

Custom darts - Hand turned - Hardwood, custom weight, precision turned competition darts, Steel Tip AND Soft Tip INCLUDED FREE!! (set of 3) Click to purchase: https://www.etsy.com/listing/239541117/custom-darts-hand-turned-hardwood-custom Welcome to the FireFlyGoods.com - Youtube Channel ! What you are watching are videos of various items (mostly darts) that I have turned in my tiny workshop. I have some rogue processes and oddball way of doing things, but in the end the products are top notch and will last a long time if well taken care of. If you are interested in ay of our items I have

 

Goncalo Alves - Custom Darts - Set of 3 - FireFlyGoods.com
By: FireFly Goods
May 21, 2018 · 7 views

Custom darts - Hand turned - Hardwood, custom weight, precision turned competition darts, Steel Tip AND Soft Tip INCLUDED FREE!! (set of 3) Click to purchase: https://www.etsy.com/listing/239541117/custom-darts-hand-turned-hardwood-custom Welcome to the FireFlyGoods.com - Youtube Channel ! What you are watching are videos of various items (mostly darts) that I have turned in my tiny workshop. I have some rogue processes and oddball way of doing things, but in the end the products are top notch and will last a long time if well taken care of. If you are interested in ay of our items I have

 

Paduack - Custom Darts - Set of 3 - FireFlyGoods.com
By: FireFly Goods
May 21, 2018 · 3 views

Custom darts - Hand turned - Hardwood, custom weight, precision turned competition darts, Steel Tip AND Soft Tip INCLUDED FREE!! (set of 3) Click to purchase: https://www.etsy.com/listing/239541117/custom-darts-hand-turned-hardwood-custom Welcome to the FireFlyGoods.com - Youtube Channel ! What you are watching are videos of various items (mostly darts) that I have turned in my tiny workshop. I have some rogue processes and oddball way of doing things, but in the end the products are top notch and will last a long time if well taken care of. If you are interested in ay of our items I have

 

Bocote - Custom Darts - Set of 3 - FireFlyGoods.com
By: FireFly Goods
May 21, 2018 · 3 views

Custom darts - Hand turned - Hardwood, custom weight, precision turned competition darts, Steel Tip AND Soft Tip INCLUDED FREE!! (set of 3) Click to purchase: https://www.etsy.com/listing/239541117/custom-darts-hand-turned-hardwood-custom Welcome to the FireFlyGoods.com - Youtube Channel ! What you are watching are videos of various items (mostly darts) that I have turned in my tiny workshop. I have some rogue processes and oddball way of doing things, but in the end the products are top notch and will last a long time if well taken care of. If you are interested in ay of our items I have

 

Indian Rosewood - Custom Darts - Set of 3 - FireFlyGoods.com
By: FireFly Goods
May 21, 2018 · 12 views

Custom darts - Hand turned - Hardwood, custom weight, precision turned competition darts, Steel Tip AND Soft Tip INCLUDED FREE!! (set of 3) Click to purchase: https://www.etsy.com/listing/239541117/custom-darts-hand-turned-hardwood-custom Welcome to the FireFlyGoods.com - Youtube Channel ! What you are watching are videos of various items (mostly darts) that I have turned in my tiny workshop. I have some rogue processes and oddball way of doing things, but in the end the products are top notch and will last a long time if well taken care of. If you are interested in ay of our items I have

 

Turn a Cross
By: Mike Peace Woodturning
May 18, 2018 · 7,161 views

I show how to turn a nice Christian cross from a piece of a branch. This is a pretty basic woodturning project for a beginner and can make a nice gift. It does not require a scroll chuck. I missed some footage cutting on the bandsaw so did this additional short video on that https://www.youtube.com/watch?v xZnT0yzPQa4 I upload new wood turning videos regularly so Ya’ll come back, hear? Here is a link to the original video on Dean's Woodworking that provided the inspiration https://www.youtube.com/watch?v BejGrBTzidE Want to support my channel? Check out my Amazon shop https://www.amazon.com

 

Wheels for Wheelbarrow Part 1
By: Daniel Vilarino
May 13, 2018 · 897 views

1 pulgada 25.4mm 1 inch 25.4mm Hola/Hi! Este video está en Inglés, si prefieres verlo en Español, por favor, haz un click en el enlace a continuación: https://youtu.be/iAaN4yTj7iE ***The following video is in English*** Esta es la primera parte de una serie de videos, donde tornearé las ruedas para una carretilla estilo antiguo para mis amigos Ariel y Jacqueline. El proyecto lo haremos en conjunto con Ariel, él va a hacer la caja de la carretilla y las piezas planas y yo voy a hacer los torneados, incluyendo las ruedas, el eje, el asa y las patas traseras. En esta primera parte, voy

 

Woodturning at 54a. #134 the last pencil bowl.
By: Keith Barrow
May 09, 2018 · 3,704 views

After so many wanted to see another pencil project,I gave in and made this one. I'll never do another,that's it!! For Seggys and Centre Finders,go to: www.woodturningat54a.com

 

119 - Woodturning - Mason Jar Lids
By: Roweville Retro
May 05, 2018 · 424 views

A kitchen project this week- turn a boring mason jar into a neat decorative item. Forstner bit: https://www.amazon.com/gp/product/B0000DD0RD/ref oh_aui_detailpage_o01_s00?ie UTF8&psc 1 Music from http://www.gosoundtrack.com, under Creative Commons Attribution License: https://creativecommons.org/licenses/by/4.0

 

Fun spring project using wood dye and hot glue to make rain drops.
By: Carl Jacobson
May 04, 2018 · 7,745 views

This was a fun project, I got to used several different techniques making it. I did a little spindle turning, off-center turning, craving, and wood dye to make this piece. I even used the hot glue gun to make rain drops. It stands about 4 1/2' tall, and is made out of Maple Bocote and driftwood. Tools used in this video ------------------------ Lathe Robust: http://www.turnrobust.com/ Easy Wood Tools: http://www.easywoodtools.com/ Thompson Lathe Tools: http://thompsonlathetools.com/ Banjo chuck mount: https://trentboschtools.com/ Starbond CA Howard beeswax Band saw Spindle sander Hand Saw D

 

Como fazer peças de xadrez - Réplica Contemporary Staunton - cavalos 6,6 cm Pt 1
By: Tiago Pinheiro GM Replic Chess
April 28, 2018 · 586 views

Como fazer peças de xadrez. Woodturning a chess pieces. Réplica das peças de xadrez Contemporary Staunton de madeira Damas com 6,6 cm de altura e 3,4 cm de base. Para mais informações e contato : https://www.facebook.com/tiago.pinhei... Para adquirir entre em contato e peça a encomenda o produto será postado no Mercado Livre 24999894211 waths

 

Woodturning - Finishing up a Wood Turned Sink (Bur Oak)
By: Woodturner Ky
April 27, 2018 · 1,001 views

In this video I'm working on finishing up a Bur Oak sink. This includes sanding, forming the drain hole, and applying a waterproof epoxy finish......with some difficulty! Last Friday's Video - Natural Edge Winged Bowl https://www.youtube.com/watch?v 0-obOAIT7wg

 

Walnut Stand For The Resin Pod
By: Carl Jacobson
April 27, 2018 · 9,581 views

Thanks for all the great suggestions for the stand. Hands down the tree form was the winner. I made it out of Walnut it's about 9' tall I finished it with Howard beeswax. The air saw I used to cut it out is a Campbell Hausfeld but the Ingersoll Rand is a great saw and a littler better price. Ingersoll Rand air saw https://www.amazon.com/dp/B00004XOT3/?ref exp_inf_pl_thewoodshoptv I put together a list of some of the tools I use in my shop (affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link: https://www.amazon.com/shop/thewoodshoptv Carolina Shoe

 

Como fazer peças de xadrez - Torre 5,6 cm Réplica Contemporary Staunton
By: Tiago Pinheiro GM Replic Chess
April 25, 2018 · 227 views

Como fazer peças de xadrez. Woodturning a chess pieces. Réplica das peças de xadrez Contemporary Staunton de madeira Torre com 5,6 cm de altura e 3,4 cm de base. Para mais informações e contato : https://www.facebook.com/tiago.pinhei... Para adquirir entre em contato e peça a encomenda o produto será postado no Mercado Livre 24999894211 waths

 

Como fazer peças de xadrez - Réplica Contemporary Staunton Bispo 7,1 cm
By: Tiago Pinheiro GM Replic Chess
April 25, 2018 · 280 views

Como fazer peças de xadrez. Woodturning a chess pieces. Réplica das peças de xadrez Contemporary Staunton de madeira Bispo com 7,1 cm de altura e 3,4 cm de base. Para mais informações e contato : https://www.facebook.com/tiago.pinhei... Para adquirir entre em contato e peça a encomenda o produto será postado no Mercado Livre 24999894211 waths

 

Out of Round-Pringles
By: woodturningwithtim1
April 24, 2018 · 10,047 views

for the fun of it... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Como fazer peças de xadrez - Réplica Contemporary Staunton Damas 8,2 cm
By: Tiago Pinheiro GM Replic Chess
April 24, 2018 · 127 views

Como fazer peças de xadrez. Woodturning a chess pieces. Réplica das peças de xadrez Contemporary Staunton de madeira Damas com 8,2 cm de altura e 3,6 cm de base. Para mais informações e contato : https://www.facebook.com/tiago.pinhei... Para adquirir entre em contato e peça a encomenda o produto será postado no Mercado Livre 24999894211 waths

 

Como fazer peças de xadrez - Réplica Contemporary Staunton Rei 9,6 cm
By: Tiago Pinheiro GM Replic Chess
April 24, 2018 · 216 views

Como fazer peças de xadrez. Woodturning a chess pieces. Réplica das peças de xadrez Contemporary Staunton de madeira Rei com 9,6 cm de altura e 3,6 cm de base. Para mais informações e contato : https://www.facebook.com/tiago.pinheiro.1023 Para adquirir entre em contato e peça a encomenda o produto será postado no Mercado Livre 24999894211 waths

 

Wood turning - 1750 Italian style microscope can i do it?
By: CraftWithAfshin
April 22, 2018 · 1,538 views

Thank you Jeff for the idea you are awesome god bless you. ---Please also check out these wonderful wood turners--- Mike Waldt : https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w RickTurns : https://www.youtube.com/channel/UCghK0Pjzr5YaZK2SlC2Dftw Carl Jacobson : https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Stuart Arts : https://www.youtube.com/channel/UCrux70rjZflDA6-ypvaH8DQ Heath Knuckles:https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ Aleksey Bek : https://www.youtube.com/channel/UCz-hSlcLGBOfzw9RKs7m_5g M. Saban Smith Woodturning: https://www.youtube.com

 

Hand turned darts - Custom set of 3
By: FireFly Goods
April 17, 2018 · 10 views

Hand turned darts - set of 3 - Custom weighted Get a set like this via FireFlyGoods.com !!

 

Custom turned darts - set of 3
By: FireFly Goods
April 17, 2018 · 3 views

Custom turned darts - set of 3 Get a set like this: FireFlyGoods.Etsy.com !!

 

Indian Rosewood Darts - Set of 3 - Custom turned - 21 g.
By: FireFly Goods
April 17, 2018 · 4 views

Hand turned, custom, Indian Rosewood darts - Set of 3. Get a set like this via FireFlyGoods.etsy.com !!

 

A mobile/cell phone holder
By: Bram the Wadesmill woodturner
April 15, 2018 · 367 views

This holder is made in the style of an old fashioned candle stick phone

 

116 - Woodturning - Fridge Magnets
By: Roweville Retro
April 15, 2018 · 95 views

Yet another scrap project. This time, it's a bunch of fridge magnets. Music from http://www.gosoundtrack.com, under Creative Commons Attribution License: https://creativecommons.org/licenses/by/4.0

 

Cotton Reel Stand
By: Stewart Furini
April 14, 2018 · 579 views

A break from coloured platters...this was made for a club competition. It's in beech and is finished with Chestnut Cut 'n' Polish and Renaissance Wax. It will hold 18 cotton reels. The offset turning was the best bit of this project. Please be aware that woodturning is a hazardous activity. These videos are only intended to show you what I do - they are not tutorials.

 

Jellyfish part 1 - Medusa parte 1
By: Mauro il tornitore
April 13, 2018 · 296 views

Jellyfish on the lathe. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Medusa al tornio. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

Natural Edge Manzanita Burl Sink.
By: Carl Jacobson
April 13, 2018 · 30,634 views

This is a piece of Manzanita burl I got from Jared at Lizard Blanks. The wood sink is about 18' x 12' and 5' thick. I turned it on the lathe first and then carved it with a TurboPlane. The TurboPlane is a great tool for carving and shaping wood. I sealed it with Systemthree resin to waterproof it. Scott Grove's video https://www.youtube.com/watch?v oqmXi2roPsU&t 2s Makers Central http://www.makerscentral.co.uk/ Tools used in this video ------------------------ Lathe Robust: http://www.turnrobust.com/ Easy Wood Tools: http://www.easywoodtools.com/ Thompson Lathe Tools: http://thompsonlathet

 

Out of Round-Rubik's Cube Slo Mo
By: woodturningwithtim1
April 12, 2018 · 13,941 views

for the fun of it... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Polished Aluminium Foil Ball ( Cut in half )
By: Andy Phillip
April 08, 2018 · 299,095 views

I had quite a few comments asking me to cut it in half to see what the inside is like .. Happy to oblige ... music- Stranger Danger by Francis Preve

 

Challenged by a Friend
By: PeteTGIF
April 08, 2018 · 216 views

This time I'm unpacking a parcel sent to me a while back. Willi from WOX-Woodworking sent some stuff in order to challenge me, as I've never seen one of the items in my shop before. There's no project this week as I need to get my junk sorted, by the way one major problem with depression. You start a lot of things, leaving the junk laying around until you're not able to moove or think clear. All of the stuff laying around my shop is blocking my creativity, so please be patience but I'll be back with a project soon. If you like to support the project PeteTGIF, like Willi did, you can send me

 

Cigar Holder-Part 1
By: woodturningwithtim1
April 07, 2018 · 9,116 views

Presentation is a big part of smoking a cigar (or it should be!), so you don't want to pull a crushed stogie out of your pocket. What you want is a custom turned cigar holder and in the episode Tim will help you with that. Part 1 of 2. Cigar Kit: https://www.woodturnerscatalog.com/p/55/6539/Artisan-Cigar-Case-with-Cutter-Punch-Tip-Kit http://www.arizonasilhouette.com/product/BHW055.html You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Cigar Holder-Part 2
By: woodturningwithtim1
April 07, 2018 · 8,677 views

Presentation is a big part of smoking a cigar (or it should be!), so you don't want to pull a crushed stogie out of your pocket. What you want is a custom turned cigar holder and in the episode Tim will help you with that. Part 2 of 2. Cigar kit: https://www.woodturnerscatalog.com/p/55/6539/Artisan-Cigar-Case-with-Cutter-Punch-Tip-Kit http://www.arizonasilhouette.com/product/BHW055.html You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Polished Aluminium Foil Ball (sanding sanding more sanding )
By: Andy Phillip
April 05, 2018 · 576,352 views

This was a project for my son over the Easter holidays but it was far too much like hard labour so he went back to the playstation !! so I had to do it myself .. Very tedious !!! music - Dance Don't Delay by Twin Musicom

 

Love HeartWood Engraved Wooden Bangle
By: Love HeartWood
April 04, 2018 · 15 views

An oak bangle I turned on the lathe and engraved with a pyrography pen. The inscription is very inspiring.

 

Uncle Paul's Cross
By: Peaceful Woodturner
April 02, 2018 · 69 views

Cross from unknown green wood. This video is in honor of a dear family member who passed away while I made this project. Uncle Paul was a pastor and an example of what it means to try to live a Christ-like life. I can only hope to do as much good in the world. All my videos are me sharing my journey as I learn this art form. I am a student, not a teacher and in no way an expert. Please take time to read, learn, and study so that you can be safe! Use and wear all appropriate safety equipment including head protection, face shield, and respiratory protection. Thank you for joining me on this journey! Facebook: https://www.facebook.com/PeacefulWoodturner/ Twitter: @WoodturnerPeace

 

Out of Round-Stretch Armstrong
By: woodturningwithtim1
April 02, 2018 · 62,006 views

for the fun of it... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

4 easy woodturning projects from leftovers - Ξυλοτορνος
By: Kostas Annikas Deftereos
March 31, 2018 · 2,063 views

Today was time to work with my leftovers so i have 4 ideas for you !! i hope you will find it interesting ! probably i will have no video next week because is the greek easter but until then we will see lol !!! If you like you can find me on the links bellow ! facebook : https://www.facebook.com/annikas8 instagram : https://www.instagram.com/kostas_annikas_deftereos google : https://plus.google.com/u/0/ KostasAnnikasDeftereos

 

Woodturning - The Spine Stand !!
By: Andy Phillip
March 31, 2018 · 12,185 views

Making a stand for 'Measles' the skull in the shape of a spine using walnut and cherry .. I think he looks better without a stand so it might go on the shelf of shame .. or could be a sea snake ornament !!

 

Coppia di libellule - Pair of dragonflies
By: Mauro il tornitore
March 30, 2018 · 265 views

A composition of two self-balancing dragonflies on the lathe. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Una composizione di due libellule al tornio. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

Foglia di acero - Maple Leaf
By: Livio Maritati
March 28, 2018 · 583 views

Il video mostra come una tavoletta di legno rosso si trasforma in una foglia di acero sotto le abili mani del mio socio australiano. In sottofondo zia Anna suona 'Tristezza! Sei tu...' al suo pianoforte.

 

The maker’s mark
By: Love HeartWood
March 25, 2018 · 6 views

Using a pyrography pen to burn the Love HeartWood mark onto a Spurtle turned on the lathe.

 

Seamless Tube Forming Sphere - Sawdust Factory Woodturning
By: Josh Bayer
March 24, 2018 · 1,721 views

Sawdust Factory Woodturning creates a seamless-tube-forming-sphere. Inspired by Malcolm Tibbetts and his segmented works. Go check out his amazing videos on segmented wood turning. ___ Music: You're No Help - Silent Partner https://youtu.be/wK6bwkuUYRo Title: You're No Help Artist: Silent Partner Genre: Pop Mood: Funky Download: https://www.youtube.com/audiolibrary/... ––– • F.A.Q: How to use music https://goo.gl/zNKFGu ––– • Main Playlists: Artists: https://www.youtube.com/channel/UCht8... Genres: https://www.youtube.com/channel/UCht8... Moods: https://www.youtube.com/channel/UCht8... ––– • Follow us: Facebook https://goo.gl/BBxPNx Twitter https://goo.gl/WJnMWV Instagram https://goo.gl/5EgBhP SoundCloud https://goo.gl/KfElaU Google https://goo.gl/eDXHbT –––

 

Tiddlywinks - Gioco delle pulci
By: Mauro il tornitore
March 23, 2018 · 597 views

Il gioco delle pulci tutto di legno al tornio. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro Tiddlywinks, an old English game, all on the lathe. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro

 

Spurtle Love HeartWood
By: Love HeartWood
March 23, 2018 · 15 views

Turning a beech wood Spurtle on a lathe. Edited highlights, speed x2.

 

Tap Handle Production
By: Kyle Toth
March 22, 2018 · 203,833 views

Tap Handle Video: -https://www.youtube.com/watch?v O8uCWMGoeZM -https://www.youtube.com/watch?v 6zeY1d7wvu0&t 18s -https://www.youtube.com/watch?v 3Zmbksi3TMo Other Tap Handles - https://www.youtube.com/watch?v pPY03gVZmho I make these tap handle for Refuge Brewery in Temecula California. I've made over 2000 tap handles for the. They are in over a 1000 bars and restaurants. Check them out here http://www.refugebrew.com Hope you enjoyed! I have more videos coming soon. Thanks for watching. Table Saw Blade: http://amzn.to/2Hl4tYT Finish I Use: http://amzn.to/2rj6bq0 Hand Saw: http://amzn.to

 

Navajo Spindles
By: DIY with Uncle Cy
March 16, 2018 · 1,082 views

Had an order for 10 of these. Decided to make one of each type of wood being used for the video. Facebook: https://www.facebook.com/UncleCysWoodworking/ Twitter: https://twitter.com/CyrusFillmore Instagram https://www.instagram.com/cyfillmore/ Music from Epidemic Sound http://www.epidemicsound.com

 

Woodturning A Vase In Style Of A Roman Canteen
By: As Wood Turns
March 16, 2018 · 3,471 views

http://www.AsWoodTurns.com For some time now, my project to do list has included a Roman canteen since I like multi-axis turning. Still, I like to be practical. A Roman canteen is not practical compared to any modern canteen. However, a Roman canteen does present a multi-axis challenge. As I considered these issues, I thought to convert the Roman canteen to a vase. It can be useful and still challenging. Then as I planned how to turn it, I realized I could, very simply, remove the most challenging features by having a separate base and neck. This is the best of both worlds plus omitting the

 

Desbastado con el Formón Oblicuo
By: Daniel Vilarino
March 13, 2018 · 3,925 views

Hola/Hi! ***This video is in Spanish, if you prefer to watch it in English, please click on the following link: https://youtu.be/wGZzazEBFn0 Este video está en Español. En este video muestro dos técnicas de desbaste en trabajos de perfilado, usando el formón oblicuo. ***In this video I show two roughing techniques for spindle work, using the skew chisel*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this video and if that was the case, please make comments, give it a 'like' and sub

 

Threaded Nut & Bolt-Part 1
By: woodturningwithtim1
March 13, 2018 · 15,052 views

Why are we doing this? Because we can, and because once it's sitting on your desk, everyone who sees it will want to know how you did it. You too? Let's ask Tim to show us how... Part 1 of 2. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Threaded Nut & Bolt-Part 2
By: woodturningwithtim1
March 13, 2018 · 12,556 views

Why are we doing this? Because we can, and because once it's sitting on your desk, everyone who sees it will want to know how you did it. You too? Let's ask Tim to show us how... Part 2 of 2 You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Skorpion-Dose
By: Linden Drechsler
March 11, 2018 · 372 views

Herstellung einer Skorpion-Dose aus Nussbaum, Aclyglas und einem Glaskristall als Deckelgriff

 

TUTORIAL 7: Captive Ring Tool & Method
By: CL Woodturning
March 09, 2018 · 193 views

Shop made captive ring tool and a demo project which includes a captive ring.

 

Libellula equilibrista - Self balancing dragonfly
By: Mauro il tornitore
March 09, 2018 · 429 views

Third type of dragonfly on the lathe. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Un terzo tipo di libellula al tornio. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

Making a pipe
By: The AZ Viking
March 06, 2018 · 39 views

Making a pipe on the lathe

 

The Toilet Roll Holder
By: Asgard Woodturning
March 05, 2018 · 194 views

In the workshop I make a toilet roll holder out of maleable iron plumbing pipe and Walnut ! I also have bit of. tidy up swell as some domestic battles to fight

 

Cedar Drink Coolies # 117
By: The Wood Whirler
March 03, 2018 · 1,468 views

I turned 3 Drink Coolies out of Cedar, enjoy.

 

Out of Round-Ginormous Jawbreaker
By: woodturningwithtim1
March 02, 2018 · 11,649 views

for the fun of it... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Silver Maple Burl 1
By: Will Coffman
March 02, 2018 · 10 views

First Video ever made of my bowl turning Silver Maple Burl Raffle Bowl

 

Woodturning Bay Laurel Burl-Finally Back Jack!
By: Woodturning Arts
March 01, 2018 · 1,552 views

In my return to woodturning I turn a Bay Laurel Burl bowl. Like/Share/Comment/Subscribe and Thanks for Watching! Audio Information Track #1 Clear Eyes by Silent Partner Track #2 Kona Sun by Freedom Trail Studio Track #3 Why Did You Do It by Everet Almond

 

Woodturning with just 2 tools part 1 by Al Furtado
By: Rebel Turner
February 28, 2018 · 6,368 views

This video is packed with good information and real time with no cuts, no time-lapse or fast forward. I felt it to worthy of your time. I hope you also enjoy the 2 camera editing. Please like and share. Thank you. email me alfurtado@rebelturner.com

 

# 288 It's Alive!
By: Cap'n Eddie Castelin
February 27, 2018 · 5,546 views

Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at capneddiecastelin@gmail.com or www.eddiecastelin.com

 

Woodturners box hinges
By: Jon Whateley
February 26, 2018 · 1,527 views

See how to make a great fun and simple ring box using the Prokraft woodturners box hinges. A little off-centre turning for something slightly different.

 

How to Turn a Torus - Solid Walnut Torus - Sawdust Factory Woodturning
By: Josh Bayer
February 25, 2018 · 4,473 views

Sawdust Factory Woodturning makes a Walnut Donut…. Too bad I prefer Danish. ___ Music: You're No Help - Silent Partner https://youtu.be/wK6bwkuUYRo Title: You're No Help Artist: Silent Partner Genre: Pop Mood: Funky Download: https://www.youtube.com/audiolibrary/... ––– • F.A.Q: How to use music https://goo.gl/zNKFGu ––– • Main Playlists: Artists: https://www.youtube.com/channel/UCht8... Genres: https://www.youtube.com/channel/UCht8... Moods: https://www.youtube.com/channel/UCht8... ––– • Follow us: Facebook https://goo.gl/BBxPNx Twitter https://goo.gl/WJnMWV Instagram https://goo.gl/5EgBhP SoundCloud https://goo.gl/KfElaU Google https://goo.gl/eDXHbT –––

 

Lids For Pretty Blue Bottles
By: Gord Rock
February 21, 2018 · 1,710 views

Turning lids for bottles my wife has collected. Naturally she changed her mind about what she wanted as soon as I thought I was finished. LOL!

 

Nightlights
By: Peaceful Woodturner
February 17, 2018 · 42 views

Facebook: https://www.facebook.com/PeacefulWoodturner/ Twitter: @WoodturnerPeace Nightlights by Peaceful Woodturner Original music: Bouncing around the Strings by Josh Fulford The music was written as a lullaby. It is both powerful and soothing and it inspired me to make these nightlights. Thank you Josh Fulford for permission to use your music. All my videos are me sharing my journey as I learn this art form. I am a student, not a teacher and in no way an expert. Please take time to read, learn, and study so that you can be safe! Use and wear all appropriate safety equipment including head protection, face shield, and respiratory protection. Thank you for joining me on this journey! Thank you for joining me on The Peaceful Woodturner. Please let me know what you think in the comments. I appreciate all your feedback. Remember, my mistakes are my own, don’t make them yours.

 

Beauty and the Beast Rose Stand / Woodturning
By: Carl Jacobson
February 16, 2018 · 9,101 views

I turned this stand for a Beauty and the Beast rose. My buddy Jared got this for his wife for Valentine's Day. I turned the base out of Maple, and decorated it with Lichtenberg figures and mother of pearl. East Inlay: http://amzn.to/2F8u7zn Conestoga Works: http://www.conestogaworks.com/ Lizard blanks: https://www.lizardblanks.com/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order I put together a (affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link: https://www.amazon.com/shop/thewoodshoptv

 

woodturning practice with spanish cedar
By: Rons Woodturning shop
February 16, 2018 · 237 views

I acquired this wood and am having fun turning out beautiful pieces with it.

 

' Can You Fix it?'
By: Rich McNatt
February 14, 2018 · 1,121 views

Did you do that? Dan's Video https://www.youtube.com/watch?v rVgL1WF5BHE

 

A Fishing Priest in Lignum Vitae and English Ash (Warts and all)
By: William Hunt
February 14, 2018 · 725 views

This should have been a straightforward project but turned out to be a concatonation of cockups. Rather displeased with my errors, I made an even worst choice to conduct a cosmetic recovery that turned out OK, but I could have done much better.

 

Handmade Bocote darts - Set of 3
By: FireFly Goods
February 14, 2018 · 9 views

Beautiful handmade darts. Made from exotic Bocote. Get your own today via FireFlyGoods.com

 

Woodturning Dolls furniture parts and Toothpick Real speed
By: woodturner21
February 12, 2018 · 5,942 views

A video with three small turnings for you to enjoy, A Toothpick, Dolls house candlestick and a table leg for a barbie table.

 

107 - Woodturning - Wireless Speaker
By: Roweville Retro
February 11, 2018 · 86 views

This week, I turn a speaker enclosure from a piece of curly maple. The kit is available from local Rockler stores, as well as rockler.com. Speaker kit: http://www.rockler.com/rockler-wireless-speaker-kit Music from http://www.gosoundtrack.com, under Creative Commons Attribution License: https://creativecommons.org/licenses/by/4.0

 

(Woodturning) Make a Valentines Heart gift box & stand.
By: Templeboy Turnings
February 04, 2018 · 1,499 views

In this video I show how I made a heart valentines gift box and stand from a log. Follow along as I show how to turn a heart shaped box on the lathe, Using off center techniques. If you would like to help with the running costs of my channel please click and tip :-) Thank you xx TIP HERE https://youtube.streamlabs.com/templeboyturnings MY MEDIA INFO Templeboy Turnings Web site and shop :- http://templeboyturnings.com/ Templeboy Turnings Facebook page :- https://www.facebook.com/TempleboyTur... Templeboy Turnings Twitter :- https://twitter.com/TempleboyTurnin Templeboy Turnings Instagram :- https://www.instagram.com/templeboytu... Templeboy Turnings patreon :- PLEASE SUPPORT MY CHANNEL HERE https://www.patreon.com/Templeboyturner My Webpage www.templeboyturnings.com

 

milk frother lid take 2 (with audio)
By: Woodturning by Alan Scannell
February 02, 2018 · 56 views

repaired the audio from yesterdays video :)

 

Making A Picture Frame For Valentine's Day / Woodturning Project
By: Carl Jacobson
February 02, 2018 · 7,983 views

This picture frame makes a great Valentine's Day gift. I turned the Maple ring and the Walnut prong on the lathe. The stone is resin I turned the basic shape on the lathe and did the final shaping with a file. Slap Stuff Together https://www.youtube.com/channel/UCSVmRC8pI-XkzGAGIGmOI6Q Makers Rock http://makersrock.com/ TOOLS I USE IN MY SHOP: https://kit.com/CarlJacobson/woodturning https://kit.com/CarlJacobson/woodworking https://kit.com/CarlJacobson/camera-gear Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ u

 

milk frother lid
By: Woodturning by Alan Scannell
February 01, 2018 · 79 views

The lid broke on my milk frother and they are expensive to replace so iv made my own one.

 

Bethlehem Olivewood Darts
By: FireFly Goods
January 31, 2018 · 11 views

Bethlehem Olivewood Darts All of our darts come with BOTH soft and hard tips. This part of the process never changes though. If you would like a set like this click the link below: http://etsy.me/2nt2h8w

 

turning didgeridoo mouthpiece purpleheart
By: Vladimir Drozdov | Woodturning | lignum vitae workshop
January 29, 2018 · 23 views

тонкий отрезной из кухонного ножа против амаранта))

 

turning didgeridoo mouthpiece bubingo
By: Vladimir Drozdov | Woodturning | lignum vitae workshop
January 29, 2018 · 86 views

точение кевазинго

 

cube in a cube on the lathe part 2
By: Steve Krumanaker
January 28, 2018 · 386 views

The second part of making a cube in a cube using only the lathe. Be sure and check out templeboy turnings channel for different methods to do this. Also, there are several videos on making one of these using a table saw and drill press. Steve Ramsey has one of the best ones.

 

making a wooden Heart for Valentines
By: woodturner21
January 27, 2018 · 4,534 views

This was made for a demo by request of a friend. It proved so popular on social media I have uploaded for you all to see.

 

cube in a cube on the lathe part 1
By: Steve Krumanaker
January 27, 2018 · 395 views

How I turn a cube in a cube on the lathe without using a table saw or drill press. I learned how to do this from Steven Twydell. His video is at; https://www.youtube.com/watch?v ooBY3Ib-BzE&t 89s To see how to make one of these the 'regular' way check out Steve Ramsey's video at; https://www.youtube.com/watch?v TfV_APBk16Q&t 207s

 

Woodturning the Olympic Flag
By: Tod Raines
January 27, 2018 · 152 views

Produced by Tod Raines of Woodturning Tool Store on January 27, 2018. To help celebrate the 2018 Winter Olympics I turned five wooden rings, painted them and assembled then to symbolize the Olympic flag. Enjoy this video on how I made this and cheer on you favorite athletes during the Olympics. Visit Woodturning Tool Store https://woodturningtoolstore.com Social media links Facebook: https://www.facebook.com/woodturningtoolstore Google : https://plus.google.com/ TodRaines Instagram: https://www.instagram.com/traines64

 

Purpleheart and Gold Sculpture
By: John Clothier
January 27, 2018 · 799 views

In this project video I show you how I made this sculpture from Purpleheart on the lathe. See how I turned the inside and then cut out the V at the top with the bandsaw. Finally it is finished with some gold leafed ends and a really good coat of Hampshire Sheen High Gloss Wax MY WEBSITE https://www.johnclothier.co.uk FOLLOW ME ON FACEBOOK https://www.facebook.com/JohnClothierUK/ FOLLOW ME ON INSTAGRAM https://www.instagram.com/JohnClothierUK/ FOLLOW ME ON PINTEREST http://pinterest.com/JohnClothierUK --------------------------------------------------------------------------------- MY EQ

 

Beginner Project Door Stop, Oak and (Not Quite) Ash
By: Tony Walters
January 24, 2018 · 24 views

In this video I try to make door stops to practice using the skew chisel. I made two large oak ones and two not quite ash ones (A lapse in concentration meant I picked up pine instead) Link to Lacer Video: https://www.youtube.com/watch?v BP89N-gKcmU

 

The Cherry Sea Urchin, and a new Milliput stockist
By: Jim Overton - Jimson's Stuff
January 22, 2018 · 4,861 views

My name is Jim Overton, welcome to my channel. Thanks for watching. Please like, share and subscribe. http://www.stilesandbates.co.uk/ www.milliput.com Disclaimer Woodturning is potentially dangerous! My videos are designed to give viewers creative ideas. The way I work is not necessarily the best or safest way to work! Your safety is your own responsibility not mine. Please follow all safety procedures and wear personal protective equipment. Wear a visor and a respirator dust mask at all times. Be safe, be creative and enjoy your turning.

 

Woodturning Try and you shall succeed by Al Furtado
By: Rebel Turner
January 20, 2018 · 3,888 views

Try and you shall succeed After Tom tried his first attempt I gave him a nice piece of wood to start with and he performed like a champ Great job Tom

 

Woodturning A Pair of Hair Sticks in Iroko
By: Nathan Cumming
January 15, 2018 · 1,003 views

In this video I turn a pair of hair sticks for my sister birthday using two Iroko blanks 1' square and 8 1/2' long. This is a fairly challenging project as the very small diameter of wood can easily snap with the slightest catch of a tool. It is an excellent project for practising with a skew chisel or working on fine details. Perfect as a gift for a female family member or friend too. I hope you've enjoyed watching this video. Special thanks to my Subscribers! If you haven't already Subscribed please visit my channel, check out my video list and consider Subscribing for more of the same. Thanks for Watching! MUSIC CREDITED TO: Cherubs by Josh Woodward https://www.joshwoodward.com Creative Commons — Attribution 4.0 International — CC BY 4.0 https://creativecommons.org/licenses/... Music promoted by Audio Library https://youtu.be/F4-YZBzg46Q

 

Woodturning a earphone box for my Etsy store
By: Eric Godwin
January 15, 2018 · 328 views

This is a handcrafted wood turned box that is available on my Etsy page at godwin woodturning.etsy. My standard box comes with the Wisconsin state outline cut out of it. But I can do other designs if you wanted. The finish I use is Danish oil with beeswax for added protection.

 

Replace your car stereo knob with wood!
By: Geiserwoodturner
January 12, 2018 · 68 views

Woodturning a new knob for my car stereo. Replacing a knob that broke. This was made from a piece of spalted western maple. I had a lot of fun with this project I hope you enjoy it. Music credits: Ambiment - The Ambient by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100630 Artist: http://incompetech.com/ This video is for entertainment purposes only. geiserwoodturner is not responsible for actions that are unsafe. Be sure to read and understand how to safely operate your power equipment before you use it.

 

Woodturning A People Feeder - Feeders Are Not Only For Birds
By: As Wood Turns
January 12, 2018 · 2,960 views

http://www.AsWoodTurns.com As I noted in the last video, my brother came to visit and brought his agenda - to turn a 'people feeder'. The wood he brought did not work out. So, we used what I believe is gum. A people feeder dispenses candy from a hopper into a shallow dish. A people feeder has four parts: 1) a clear container for the candy; 2) a lid that fits the container; 3) a upper portion that holds the container and has hole for the candy to drop through; 4) a shallow dish from which one 'feeds himself'. a dowel keeps the two wood pieces together. This people feeder is about 7 inches di

 

Drew Shelton - Femispheres - Part 2
By: DentonTurners
January 11, 2018 · 8,173 views

Drew Shelton is a member of the Central Texas Woodturners Association and has held many positions in that group, including President. In this demo at the Golden Triangle Woodtureners' monthly meeting, Drew discusses the Femisphere and demonstrates how to make one on the lathe. Part 1: Drew discusses what a Femisphere is, the design princiles, and prepares the turning blank. Part 2: In Part 2, Drew turns the initial shape, cuts the piece in half, and assembles the final Femisphere. The Golden Triangle Woodturners meet monthly on the first Monday of the month at 7pm in the Center for the Visual Arts located at the corner of Hickory and Belle streets in Denton, Texas. All are welcome to attend. http://www.goldentrianglewoodturners.org

 

Drew Shelton - Femispheres - Part 1
By: DentonTurners
January 11, 2018 · 15,206 views

Part 1: Drew discusses what a Femisphere is, the design principles, and prepares the turning blank. Part 2: In Part 2, Drew turns the initial shape, cuts the piece in half, and assembles the final Femisphere. Drew Shelton is a member of the Central Texas Woodturners Association and has held many positions in that group, including President. In this demo at the Golden Triangle Woodturners' monthly meeting, Drew discusses the Femisphere and demonstrates how to make one on the lathe. The Golden Triangle Woodturners meet monthly on the first Monday of the month at 7pm in the Center for the Visual Arts located at the corner of Hickory and Belle streets in Denton, Texas. All are welcome to attend. http://www.goldentrianglewoodturners.org

 

Woodturning : Spalted Curly Sink
By: SG Art Turning
January 10, 2018 · 20,648 views

Email : simgadoury@gmail.com Website : https://sg-art-turning.com/ Facebook : https://www.facebook.com/SGTurning/ You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg My Lathe Laguna : https://lagunatools.com/classic-machinery/lathes/revo-2436-lathe-220-volt/ Alumilite Epoxy : https://www.alumilite.com/store/p/1073-Amazing-Clear-Cast-Bar-Top-Coating.aspx

 

1st Try Making a Logo Coin & Some Tips
By: Gord Rock
January 08, 2018 · 1,791 views

My first attempt to recreate the logo coin a friend made for me a few years ago. Also, a way to hold a piece of wood down while you work on it without the use of clamps.

 

Turning a coaster from an old pallet.
By: Eric Godwin
January 07, 2018 · 132 views

This video shows how events can inspire your woodturning hobbies. With the help of my family I recreated the events that unblocked my woodturning project. The wood I used was from an old pallet. It was about 1' thick and about 4'X4' wide. I started out by mounting the piece between centers. I turned the outside round then faced the tail stock side and added a tenon. I flipped the piece around and mounted it in my scroll chuck. I faced this side flat. At this time I removed the scroll chuck and put on a wood face plate. This allows me to add two sided tape and mount the piece directly to the

 

Formica di legno - Wooden Ant
By: Mauro il tornitore
January 06, 2018 · 409 views

A wooden ant. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Formica di wengè Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

How I make a Pocket Watch Stand woodturning
By: woodturner21
January 06, 2018 · 5,441 views

This video shows the process to make a pocket watch stand by woodturning

 

Time Capsule #1
By: Beyond Wood
January 06, 2018 · 356 views

The Fine Art of Wood Turning Arhur Jones, Florida - Todd Hoyer, Arizona - Alain Mailland, France -

 

Woodspin - modelo Especial Haya 6 cm
By: Woodspin Peonzas
January 06, 2018 · 16 views

 

Ein Huhn als Zahnstocherhalter
By: Thomas Haeckel
January 03, 2018 · 21,822 views

Ein Huhn mit Zylinder als Zahnstocherhalter, live gedrechselt von Thomas Häckel. Ein Video von Drechsler-Wissen.de.

 

Amazon Echo Wood Cover
By: George Fotinakes
December 31, 2017 · 106 views

See how you can 'dress up' Alexa with a wooden jacket. Here an olivewood tree branch is converted into a beautiful and functional cover for your Echo Dot.

 

Woodturning with Tim Yoder-Green Wood Gnome part 2
By: woodturningwithtim1
December 31, 2017 · 8,810 views

Tim 'harvested' some free wood he found at his local green waste recycling center. It inspired him to make a project that could be left outside to naturally weather and blend in with its surroundings. He made a Gnome…yep a Green Wood Gnome. Using just the finish from his tools (NO SANDING!) Tim shows you how to craft a Gnome that any garden would be proud of. Part 2 of 2. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

PopCorn Skillet # 111
By: The Wood Whirler
December 30, 2017 · 2,126 views

Check out my new intro.

 

Woodturning with Tim Yoder-Green Wood Garden Gnome Part 1
By: woodturningwithtim1
December 30, 2017 · 10,484 views

Tim 'harvested' some free wood he found at his local green waste recycling center. It inspired him to make a project that could be left outside to naturally weather and blend in with its surroundings. He made a Gnome…yep a Green Wood Gnome. Using just the finish from his tools (NO SANDING!) Tim shows you how to craft a Gnome that any garden would be proud of. Part 1 of 2 You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Fat wood makes a nice Phat Lady box by Al Furtado
By: Rebel Turner
December 29, 2017 · 6,453 views

Playing around in the shop taking a break from the renovations I turned a lady box. I used fat wood for the upper body and River Birch for the skirt and legs.. The checking makes the skirt look wrinkled. I think she just needs a good buffing. That will be done off camera.

 

Kinetic Art - Don't Let Glass Have All The Fun
By: As Wood Turns
December 29, 2017 · 3,586 views

http://www.AsWoodTurns.com After seeing a decorative glass item at a craft store, I had to try to make a similar wood item. The original was a hexagon, mine is a round. The original was glass, mine is wood. Mine can roll around. I'm not sure what the wood is. It has many characteristics of maple but is much more porous. My piece is eight inches in diameter and five inches tall. It is finished with lacquer. What would you do with it? Happy New Year. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Traumerei by Shumann performed by Becky Schlappi. Used by permission.

 

Xadrez Staunton Germany de Madeira - Rústico Rei 10,5 cm
By: Tiago Pinheiro GM Replic Chess
December 27, 2017 · 188 views

 

Making Large Wooden Bullets
By: Colbe Pease Woodworking
December 26, 2017 · 1,073 views

In this video I make a large bullet made from wood. I made a few of these as Christmas gifts this year. the shells are made of Oak, and the tips are Alder.

 

Bocote - Custom darts - set of 3
By: FireFly Goods
December 25, 2017 · 7 views

Thank you for taking a moment to stop in and watch some of our YouTube.com videos. My wife and I love the craft(s) and hope you can get some entertainment out of the videos that are posted. As time allows I will expand on the videos and even begin producing tutorials and 'how-to' videos.

 

Goncalo Alves - Custom darts - set of 3
By: FireFly Goods
December 25, 2017 · 2 views

Thank you for taking a moment to stop in and watch some of our YouTube.com videos. My wife and I love the craft(s) and hope you can get some entertainment out of the videos that are posted. As time allows I will expand on the videos and even begin producing tutorials and 'how-to' videos. What you are seeing here are raw videos shot right in the studio workshop. There is typically no editing or censoring. Most of the time there is no sound other than the lathe and tools. So in the meantime, enjoy... Also, please spread the word and take a minute to do a little clicking and such from the list

 

Indian Rosewood - Custom darts - set of 3
By: FireFly Goods
December 25, 2017 · 4 views

Thank you for taking a moment to stop in and watch some of our YouTube.com videos. My wife and I love the craft(s) and hope you can get some entertainment out of the videos that are posted. As time allows I will expand on the videos and even begin producing tutorials and 'how-to' videos. What you are seeing here are raw videos shot right in the studio workshop. There is typically no editing or censoring. Most of the time there is no sound other than the lathe and tools. So in the meantime, enjoy... Also, please spread the word and take a minute to do a little clicking and such from the list

 

Indian Rosewood - Handmade - Merry Christmas
By: FireFly Goods
December 24, 2017 · 14 views

Indian Rosewood pen. Handmade Christmas present.

 

Custom Darts - Bocote, custom weight, precision turned competition darts.
By: FireFly Goods
December 21, 2017 · 6 views

Thank you for taking a moment to stop in and watch some of our YouTube.com videos. My wife and I love the craft(s) and hope you can get some entertainment out of the videos that are posted. As time allows I will expand on the videos and even begin producing tutorials and 'how-to' videos. What you are seeing here are raw videos shot right in the studio workshop. There is typically no editing or censoring. Most of the time there is no sound other than the lathe and tools. So in the meantime, enjoy... Also, please spread the word and take a minute to do a little clicking and such from the list

 

Custom Darts - Bethlehem Olivewood, custom weight, precision turned competition darts.
By: FireFly Goods
December 21, 2017 · 6 views

Thank you for taking a moment to stop in and watch some of our YouTube.com videos. My wife and I love the craft(s) and hope you can get some entertainment out of the videos that are posted. As time allows I will expand on the videos and even begin producing tutorials and 'how-to' videos. What you are seeing here are raw videos shot right in the studio workshop. There is typically no editing or censoring. Most of the time there is no sound other than the lathe and tools. So in the meantime, enjoy... Also, please spread the word and take a minute to do a little clicking and such from the list

 

Custom Darts - Bocote, custom weight, precision turned competition darts.
By: FireFly Goods
December 21, 2017 · 8 views

Thank you for taking a moment to stop in and watch some of our YouTube.com videos. My wife and I love the craft(s) and hope you can get some entertainment out of the videos that are posted. As time allows I will expand on the videos and even begin producing tutorials and 'how-to' videos. What you are seeing here are raw videos shot right in the studio workshop. There is typically no editing or censoring. Most of the time there is no sound other than the lathe and tools. So in the meantime, enjoy... Also, please spread the word and take a minute to do a little clicking and such from the list

 

Barometer Frame
By: Jon Whateley
December 19, 2017 · 195 views

See how to turn an open backed barometer or clock frame using a home made bowl sander and using a home made turning tool. The turning tool has 2 blades, one at each end and the bowl sander also doubles as a polisher for finishing the project

 

Copper Wall Art - Part 2 of 2
By: John Clothier
December 17, 2017 · 527 views

In this final part of 2 part video I show you the whole process of how I created this copper wall art. it is 8' across and was entered into a competition. If you havent seen part 1 please do, the link is here : https://youtu.be/lhrn-2GaPHw In this episode I created the copper leafed design on the front and finish off the colouring

 

Refinish silverware on mini lathe?
By: Gabe Castro
December 12, 2017 · 47 views

How to repair and refinish silverware on mini lathe?

 

She is a Nice Piece of Ash but....
By: Vinces WoodNWonders
December 11, 2017 · 236 views

This video is about She is a Nice Piece of Ash but....

 

plugi do uszu czarny dąb czerwona żywica / wood earplugs , gauge
By: DrewnianySzejk
December 09, 2017 · 215 views

fb.com/drewniany.szejk

 

Copper Wall Art - Part 1 of 2
By: John Clothier
December 09, 2017 · 1,254 views

In this first of 2 part video I show you the whole process of how I created this copper wall art. it is 8' across and was entered into a competition. In this episode I show you the turning texturing and colouring. In Part 2 you will see how I created the copper leafed design on the front and find out how I got on in the competition!

 

Woodturning / Maple Burl Sink / Bathroom Remodel
By: Carl Jacobson
December 08, 2017 · 127,043 views

I turned this sink on the lathe out of a piece of Maple burl it's 14' x 7' Robin and I are putting together a mobile makerspace, and this sink is for the RV. We'll be spending a lot of time on the road, and to be honest the one that was in there was HIDEOUS!! SG ART TURNING https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg/feed William Osman https://www.youtube.com/channel/UCfMJ2MchTSW2kWaT0kK94Yw/featured You can help William out here. https://www.gofundme.com/osmans-fire-relief Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.

 

Woodturning - A Pair of - Penguins ??
By: Andy Phillip
December 01, 2017 · 148,419 views

A make it up as you go along turning - with Oak - Wenge & maple . Reminded me of Penguins when finished !! https://www.etsy.com/uk/shop/AndyPhillipHandmade

 

#86 Owl! Sphere Jig Woodturning Project
By: M. Saban Smith Woodturning
November 29, 2017 · 15,696 views

Finally got enough time to film a project video and here is a very cute woodturned owl ornament. For the sphere, I used the Paul Howard Sphere Cutting Jig which is a simply brilliant piece of kit, and a worthy purchase. The owl was turned (mostly) following the instructions he kindly sent me. If you would like any further information about the jig or the instructions, please visit his website at: https://www.paulhowardwoodturner.co.uk I've not been sponsored for this video and have received no payment for it. The sycamore owl was started off with a roughing gouge and a bowl gouge before mo

 

E102 - Filming Today!!!
By: M. Saban Smith Woodturning
November 28, 2017 · 1,987 views

Yes! Filming a project video today using a Paul Howard Sphere Cutting Jig and vacuum chuck to turn a cute owl. :-)

 

Out of Round-Cassette Tape
By: woodturningwithtim1
November 16, 2017 · 6,910 views

for the fun of it... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Turning a Drinking Flask with Keith Buxton
By: Show Me Woodturners
November 13, 2017 · 212 views

Keith demonstrates the steps to make a Jimmy Clewes style turned drinking flask

 

Woodturning - The Gherkin
By: Andy Phillip
November 10, 2017 · 356,837 views

Turning the exothermic blank .. Thanks for all the comments it was a landslide victory for turn it !! At least we get to see how ugly it really is and it's a reminder not to mix too much epoxy in one go !! ps.. I made another but haven't been brave enough to cast it yet .. Thanks for watching

 

woodspin - Modelo Volcano Picasso
By: Woodspin Peonzas
November 09, 2017 · 16 views

Torneado del modelo Volcano Picasso, una de las cuatro peonzas realizadas en exclusiva para la exposición Picasso-Lautrec en el Museo Nacional Colección Thyssen Bornemisza del 17 de octubre al 21 de Enero de 2018

 

cylinder mower rollers
By: Jon Whateley
November 04, 2017 · 483 views

How to make new wooden rollers for cylinder mowers. Repair of vintage lawnmowers with a new set of wooden rollers.

 

Wooden Santa Claus / Woodturning Project
By: Carl Jacobson
November 03, 2017 · 7,729 views

Download The Giddy App https://giddy.io/dowhatyoulove The Giddy App is available worldwide. In this video I made a wooden Santa Claus. The reddish wood is very soft, I'm not sure what it is though. I turned all the pieces on the lathe, before gluing them together. Christmas Ornament Entries! http://www.aswoodturns.com/challenges/ NV Woodwerks http://nvwoodwerks.com/ D-Way Tools http://d-waytools.com/ RZ Mask: https://rzmask.com/ Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of

 

Wood turning Trick or treat hollow vessel by Al Furtado
By: Rebel Turner
November 01, 2017 · 5,059 views

Golden Trumpet Trick or treat hollow vessel I had this piece started 2 weeks later it was finished

 

Woodturning with Tim Yoder Classics-Turkey Leg Napkin Holder Part 1
By: woodturningwithtim1
November 01, 2017 · 6,895 views

Thanksgiving is a tricky holiday for turners. The usual images don’t lend themselves easily to turned decorations. But not to despair, Tim has the answer: A turkey leg napkin holder. Brilliant, maybe a little twisted, but a fun project, nonetheless. Part 1 of 2. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Please support our sponsors. Without them we could not bring you these videos. Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Woodturning with Tim Yoder Classics-Turkey Leg Napkin Holder Part 2
By: woodturningwithtim1
November 01, 2017 · 7,398 views

Thanksgiving is a tricky holiday for turners. The usual images don’t lend themselves easily to turned decorations. But not to despair, Tim has the answer: A turkey leg napkin holder. Brilliant, maybe a little twisted, but a fun project, nonetheless. Part 2 of 2. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Please support our sponsors. Without them we could not bring you these videos. Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Halloween Special - Turning a Pumpkin
By: John Clothier
October 31, 2017 · 429 views

In this Halloween special I created a Pumpkin from Lime wood. This video was created as part of a Halloween Challenge on the 'Small Workshop YouTube Makers' group on Facebook. If you are YouTuber with a small workshop and would like to join this group then visit us here https://www.facebook.com/groups/109030066480071/ Other videos in the challenge: Willmore's World Of Wood - https://www.youtube.com/watch?v 80MvkXjAIkA&feature youtu.be Jim Barry - https://www.youtube.com/watch?v VMps6EM5B2o&feature youtu.be Phil Cannon Woodworking - https://www.youtube.com/watch?v QbWaeGIEOis&feature youtu.be Paul Lockwood - https://www.youtube.com/watch?v QbWaeGIEOis&feature youtu.be Make It Soph - https://www.youtube.com/watch?v h95XOHKpoLc&feature youtu.be Stephen's 8x6 Workshop - https://www.youtube.com/watch?v SfPxe7Tm5R8&index 5&list PLGWHuGuchXJwmagZ2pzqAmJua1oGvMCaQ Make Brooklyn - https://www.youtube.com/watch?v VMps6EM5B2o&list PLGWHuGuchXJwmagZ2pzqAmJua1oGvMCaQ&index 1

 

woodspin - Modelo Saturn
By: Woodspin Peonzas
October 26, 2017 · 25 views

 

Out of Round-Trick or Turn!
By: woodturningwithtim1
October 24, 2017 · 5,286 views

for the fun of it.... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Out of Round-Styrofoam
By: woodturningwithtim1
October 23, 2017 · 26,867 views

for the fun of it... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Zoltán barátomnak
By: Szabó János
October 23, 2017 · 1,126 views

Hogyan kell kézből fúrni, illetve tolómérővel pontos vastagságot készíteni

 

Woodturning a cube inside a cube (Captive cube puzzle)
By: Templeboy Turnings
October 20, 2017 · 2,638 views

In this video I turn a log of wood into a cube with another cube inside it. Watch as I uncover the mystery of how to woodturn a cube on a lathe that usually makes things round, and the process of how to create a second free floating cube inside it. JCM Tattoo studio website link :- https://www.jcmtattoostudio.com/ JCM Facebook page :- https://www.facebook.com/profile.php?id 461774803921408&ref br_rs This is the link of the original video Curtis watched and got the idea to challenge me to make this piece. Engineer BrunS original video https://youtu.be/AuS6HDHc7XE I was not paid or sponsor

 

How To Make A Gear Shift / Easy CA Finish
By: Carl Jacobson
October 20, 2017 · 22,505 views

In this video I turned a gear shift knob out of a resin blank I got from Zac at NVWoodwerks. I turned the Walnut and Maple gear shift knobs on a live show, and waited to put the CA finish on for this video. Zac https://www.youtube.com/user/NVWoodwerks Bob https://www.youtube.com/user/RJBWoodTurner Gear shift sizing website https://www.hotrodshiftknob.com/whats-my-shift-knob-thread-size/ Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order TOOLS I USE IN MY SHOP: https://kit.

 

How To Gear Shift Knob / Live Q&A Woodturning
By: Carl Jacobson
October 16, 2017 · 5,993 views

In this live show I made a Walnut and Maple gear shift knob for my truck. It's 2 1/2' in diameter and 4' tall. Checkout this website to find the bolt size for your car or truck. https://www.hotrodshiftknob.com/whats-my-shift-knob-thread-size/ RZ Mask: https://rzmask.com/ Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order TOOLS I USED IN THIS VIDEO: Lathe: http://www.turnrobust.com/ Turning tools: http://www.easywoodtools.com/ Turning tools: http://thompsonlathetools.com/ Sand

 

Red White and Blue rod handle.
By: Ed Krystosek
October 16, 2017 · 156 views

Description

 

Turning a wooden bow tie #05
By: Made by Brent
October 14, 2017 · 84 views

This is a time lapse of how I turn a bow tie. I got this idea from Tim Yoder. If you would like to see how to do this in more detail then watch his videos: https://www.youtube.com/watch?v C0BStOK2o04 (part one) https://www.youtube.com/watch?v u0iIFnYzjn4 (part two)

 

Ironbark pole.
By: Ian Robbo Robertson
October 13, 2017 · 156 views

Some of the turning we do. This is an old Ironbark phone pole.

 

'As The Bagel Cooks'
By: Rich McNatt
October 11, 2017 · 298 views

 

wood turned Dragon egg
By: Wayne the Woodturner
October 08, 2017 · 260 views

A small egg shaped hollow form, 2.75' tall x 1.75' dia, finished with YG and Lemon oil

 

woodstock woodshow 2017 ' make a cowboy hat '
By: Woodslee Summercraft
October 07, 2017 · 1,055 views

walking around the woodstock woodshow this Year there was so much to see and do, people to talk to, things to learn and tools and supplies to purchase, i could have stayed there longer and spent way more money than i did, but i have to leave something to buy next Year, see Ruby Cler describe how she turns a cowboy hat. it just makes me want to try different techniques.

 

Woodturning by Koen Verbeke Sheep Shaun step by step
By: Manual woodturning projects by Koen Verbeke
October 06, 2017 · 262 views

A fun wood turning project. For starting wood turners. Takes a few hours but many variation possibilities. Will make you a cool person towards your kids or grand kids. If you have some questions dont hesitate to ask ill do my best to give a quick respons. If you like the video please press the thumb

 

Threaded Nut Cracker
By: Gord Rock
October 04, 2017 · 1,778 views

A Threaded Nut Cracker based on the project by Ian Woodford which was published in the October 2016 issue of Woodturning. Link to the video on making a Threaded Glue Block: https://www.youtube.com/edit?o U&video_id KWA8YqgRaAo Link to the video on building the steady rest that I used in this video: https://www.youtube.com/edit?o U&video_id P0CJF-lMe3E Link to the Beall Threading Kit: http://www.leevalley.com/en/wood/page.aspx?p 41791&cat 1,43000 Link to Beall Lathe Spindle Taps for Threaded Glue Blocks: http://www.leevalley.com/en/wood/page.aspx?p 57074&cat 1,330,49238

 

Out of Round-Vinyl 45 Record
By: woodturningwithtim1
October 03, 2017 · 11,639 views

for the fun of it... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Woodturning with a shovel
By: woodturner21
October 03, 2017 · 4,431 views

Do not copy. This is just for fun, showing how any sharp tool can cut wood.

 

Bottoni di legno - Wooden buttons
By: Mauro il tornitore
October 01, 2017 · 429 views

Come personalizzare una polo o una camicia con bottoni di legno al tornio. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro

 

028-03-03 WWRJF Turn a Brush Handle a Club Demo 3 of 3 2017-09-19 - 47min
By: Richard Ford
September 30, 2017 · 131 views

How I make a Shaving Brush Handle. Originally Uploaded:- 2017-09-30

 

Dracula Halloween Project / Woodturning
By: Carl Jacobson
September 29, 2017 · 7,133 views

Download The Giddy App https://giddy.io/dowhatyoulove Fun Halloween woodworking project. Dracula is 9' tall, dyed black and scarlet red. Robin painted the face and hair. TOOLS I USED IN THIS VIDEO: Lathe: http://www.turnrobust.com/ Turning tools: http://www.easywoodtools.com/ Turning tools: http://thompsonlathetools.com/ Wood dye: http://amzn.to/2wZWV7F Air Reciprocating Saw: http://amzn.to/2hpZjyy Sandpaper: http://woodturnerswonders.com/ DISCOUNT CODES Starbond CA Glue use SBONDCARL15 for 15% discount off of any order RZ Mask: Use RZCarl for 15% off your o

 

THE MATCHSTICK LIGHT!
By: Nick Zammeti
September 22, 2017 · 134,967 views

MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw WOODART PRODUCTS (THE LITTLE LED LIGHT) http://www.woodart-products.co.uk/ THE WOODWORKING SHED https://www.youtube.com/channel/UC2hWlsf15z-7-smBhGdZvNg MARBLE ART http://www.marbling4fun.net/ THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktinium

 

drechseln eines Kaffeetisches aus einem Stamm , woodturning a log into a big coffeetable DIY
By: Woodturning F-Z
September 22, 2017 · 7,499 views

Heute zeige ich euch wie ich aus einem großen brocken Ahorn einen Kaffeetisch drechsle( noch größer schafft meine Drechselbank glaub ich nicht) in this video i wanna show you How to turn an coffeeetable from a big peace of Maple have Fun

 

Out of Round-Minion
By: woodturningwithtim1
September 21, 2017 · 7,686 views

for the fun of it.... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Placas de Reconocimiento en Roble Rojo
By: Daniel Vilarino
September 21, 2017 · 3,480 views

Hola/Hi! ***This video is in Spanish, if you want to watch it in English, please click on the following link:*** https://youtu.be/5NA8twUQfjc Este video está en Español. En este video fabrico unas placas circulares de reconocimiento en roble rojo para los proveedores de servicios de salud que prestan sus servicios sin costo en la Feria de la Salud de la OEA. ***In this video I make several circular recognition plaques in red oak to recognize the health services providers that contribute free of cost to the annual OAS Health Fair.*** Ojalá que hayan disfrutado de este video y si fue así, por

 

Red Oak Recognition Plaques
By: Daniel Vilarino
September 21, 2017 · 1,028 views

Hola/Hi! Este video está en Inglés, si deseas verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/xHloEGwNWtA ***This video is in English*** En este video fabrico unas placas circulares de reconocimiento en roble rojo para los proveedores de servicios de salud que prestan sus servicios sin costo en la Feria de la Salud de la OEA. ***In this video I make several circular recognition plaques in red oak to recognize the health services providers that contribute free of cost to the annual OAS Health Fair.*** Ojalá que hayan disfrutado de este video y si fue así, po

 

Balance Tray
By: Lee Burkholder
September 19, 2017 · 299 views

Cumberland Valley Wood Turners, balance tray, lathe, wood turning, turning, wood, wooden toys

 

The finished banjo thingy
By: Blind Woodturner
September 18, 2017 · 346 views

Hello everyone.The owner of the banjo project,Bryn,called around this afternoon.The instrument sounds wonderful and it was an honour to be asked to get involved.

 

Paint Mixer
By: Walter Wager
September 18, 2017 · 1,715 views

Need to shake a can of paint? Use your lathe? Be sure the cap is on tight I'm not responsible for lid failure. Lathe speed under 80 RPM, proceed at your own risk.

 

Roberts Drechselbude - Kleine Kirschholzschale
By: Roberts Drechselbude
September 18, 2017 · 292 views

Die kleine Schale aus Kirschholz drechsle ich heute mit meinem neuen Nova G3 und einem selbergebauten Longworth-Aufspannfutter. Das Lonworth funktioniert richtig gut und war alles in allem billiger als die Spannbackenvergrößerungen von Teknatool, die ich mir eigentlich zulegen wollte. Den Bauplan dazu hab ich hier gefunden: https://www.youtube.com/watch?v r7YumtgjEDA An Jürgen Glaser einen herzlichen Dank, dass er den Plan auf seiner Homepage zum Download zur Verfügung stellt.

 

Earning some brownie points
By: Asgard Woodturning
September 18, 2017 · 211 views

Earning some brownie points little project using Oak, Walnut, zebrano, Purple Heart and a bit of Teak Chopping Board Andy Philip channel https://www.youtube.com/channel/UCDQz4H7tz6Fwu5_5rg4W6pA

 

Post Box - Money Box
By: Jake Webb
September 17, 2017 · 2,974 views

I love the way this turned out, both the piece and the video. I hope you enjoy watching as much as I enjoyed the creative process, screw-ups and all. The video pays homage to two of my favorite woodworkers/YouTubers who inspire me. If you think you know who put your guesses in the comments below. My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

A little off center
By: Brad c
September 16, 2017 · 11 views

This was the start of a bowl. Lol

 

Flaschenkorken Serie Drechseln
By: Hobbydrechsler Thomas Pfahler
September 15, 2017 · 1,516 views

In diesem Video möchte ich euch zeigen wie mehrere Flaschenkorken enstehen, ich hoffe das Video gefällt euch :-)

 

Making dowels on a lathe
By: Nubsnstubs
September 14, 2017 · 1,567 views

In this video, I made an adapter for a Veritas Dowel Maker from Lee Valley Tools. I didn't like how they showed in the instructions how to make dowels, so decided I would try to improve the dowel making process with this 3/8' dowel maker. I think I did OK. Watch at least until 21:10 -21:25 mark and watch me get beat by the ugly stick. I definitely learned from that, and now use the quill to stabilize the back end of the dowel...... Enjoy. ............ Jerry (in Tucson)

 

Woodturning a Traditional Scottish Porridge Spurtle from Beech
By: Nathan Cumming
September 12, 2017 · 1,540 views

In this video I turn a a Spurtle - a traditional Scottish utensil used for making porridge. The thin, cylindrical stem prevents clumping while stirring the porridge. There is nothing worse than lumpy porridge! I have been given the opportunity to showcase my woodturning in a local crafts shop and was requested to make a few Spurtles and porridge bowls. I made one previously as a prototype to find my own unique design while remaining true to the traditional 'thistle' top. I will use that one as a template for the rest of them. The material I use is Beech, as I have a lot on hand and it's exce

 

Acrylic crow call
By: Rons Woodturning shop
September 09, 2017 · 184 views

Quick but messy project for today.

 

New shop toy review
By: Rons Woodturning shop
September 07, 2017 · 90 views

Followed Jason Lowrie's method of using a clamp on adjustable lamp. Less than 20.00 for the articulating camera mount. Plus a couple of non video projects I have done this week.

 

Woodturning with Tim Yoder-Bow Tie Part 2
By: woodturningwithtim1
September 06, 2017 · 7,173 views

Tim shows you how to 'tie one on'...not that...a Bow Tie! Using Curly Maple and Purpleheart and several mounting techniques Tim makes a tie you would be proud to wear to any event. Bow Tie outline https://www.pinterest.com/pin/325455510547161960/?lp true Bow Tie hardware https://www.amazon.com/gp/product/B00NGNNQIQ/ref oh_aui_detailpage_o04_s00?ie UTF8&psc 1 Black Elastic https://www.amazon.com/gp/product/B00KOR2SEA/ref oh_aui_detailpage_o04_s00?ie UTF8&psc 1 You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturni

 

Woodturning with Tim Yoder-Bow Tie Part 1
By: woodturningwithtim1
September 06, 2017 · 10,015 views

Tim shows you how to 'tie one on'...not that...a Bow Tie! Using Curly Maple and Purpleheart and several mounting techniques Tim makes a tie you would be proud to wear to any event. Bow Tie outline https://www.pinterest.com/pin/325455510547161960/?lp true Bow Tie hardware https://www.amazon.com/gp/product/B00NGNNQIQ/ref oh_aui_detailpage_o04_s00?ie UTF8&psc 1 Black Elastic https://www.amazon.com/gp/product/B00KOR2SEA/ref oh_aui_detailpage_o04_s00?ie UTF8&psc 1 You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturni

 

DIY Turned Keychain Lightsaber #01
By: Made by Brent
September 06, 2017 · 151 views

Learn how to make your own turned keychain lightsaber. Check out more of my projects at madebybrent.wordpress.com

 

Woodspin - modelo Bell
By: Woodspin Peonzas
September 04, 2017 · 15 views

Revisión del modelo Bell

 

Relic Shield With Reactive Paints
By: John Clothier
September 03, 2017 · 366 views

In this project I made a Relic Shield using Reactive paints. My original idea didn't work out as I would of liked so I changed it as I went along. Reactive Paints available from http://www.msabansmith.com/shop/embellishments/verday-metal-reactive-paints/ Martin's Ancient Shield https://www.youtube.com/watch?v osUv7DHV98s&t 1303s

 

Roberts Drechselbude - Ringvase
By: Roberts Drechselbude
September 03, 2017 · 480 views

Heute mache ich aus gestockter Buche eine Vase aus ausgestochenen Ringen. Nach dem Projekt hab ich beschlossen, mir demnächst doch noch eine segmentierte Planscheibe für mein neues Drechselfutter zu kaufen. Da spart man sich viel Handarbeit..... Und immer daran denken, Sicherheit geht vor!

 

021-02-01 WWRJF - Wooden Flowers 57min
By: Richard Ford
September 02, 2017 · 92 views

In this video I describes how I make Flowers From Scraps. It's a Valentines project for my Granddaughters. Originally Uploaded Feb 16 2015 --- 9,449 views

 

selbstgemachtes Wachs für 1000 verschiedene Anwendungen, wax for 1000 Various applications,DIY
By: Woodturning F-Z
August 27, 2017 · 9,822 views

Heute zeige ich euch wie ihr euch selbst ein Wachs zum Drechseln herstellen könnt Das Mischungsverhältnis liegt bei 2 Teilen Bienenwachs(500g) 1 Teil Terpentin (250g) 1 Teil Firnis (250g) natürlich auch für Schuhe Leder und vor allem für OILskin Jacken und Hüte einsetzbar viel spaß beim selber machen in this Video i wanna show you how you can make your own Woodwax,Shooeswax, or wax for your OIlskin Jackets mixing 2 Parts of beeswax 1 Part of turpentine 1 Part of Varnish oil

 

Magic Wallet using veneer WITH A bit 0f FAIL!!
By: Guil The Bearded Woodworker
August 25, 2017 · 172 views

magic wallet magic wallet presto and your money moneys gone. this was an experiment with a few veneers and denim.

 

Dangerous? Nah, it's held by a woodworm screw!
By: madronawoodworks
August 25, 2017 · 263 views

An irregular shaped piece and I wanted to see what it would become. This is just a short video showing what it might be like to stand in front of an airplane propeller. (It turned out, well!)

 

Woodturning
By: Desmond Shore
August 13, 2017 · 31 views

Paper towel stand for paper towel, made out of timber from an old window frame.

 

Woodturning a thin walled tube, and embellishing it with abstract pyro Art.
By: Templeboy Turnings
August 05, 2017 · 884 views

In this quick video I show the process of how I turned a really thin walled tube (1mm thick) and then embellish is with some abstract Pyrograpghy , piercing and carving. This piece is eventually going to be used in another project I am working on at the moment. Music in this video was written and created by Behind The Vine, and all rights and copyright are owned by them. I have been given permission by the band to use their music. Check out Behind the vines Trilogy here :- https://www.youtube.com/channel/UCyQstrAs9i3IxjNFyGfFXVQ For any information or to follow me on social media please

 

Чаша из обрезков (Bowl of scraps)
By: Аleksey Bek
August 05, 2017 · 2,076 views

Склеил заготовку из куска яблони и ясеня. Обработал на станке и получилась чаша. Glued blank out of a piece of Apple and ash. Processed on the machine and get a Cup.

 

Casting a Lead blank and turning it on my Lathe - Workshop Pencil
By: Nathan Cumming
August 04, 2017 · 1,886 views

In this video I experiment with Lead and turning it on a woodturning Lathe. I melt down some scrap lead using an old saucepan and camping stove. Once the lead is molten I scrape off the dross before pouring to ensure only pure lead is cast in the mould. The blank produced is 150mmx25mmx25mm, perfect for the sketch pencil kit. Once the through holes are bored and the brass tubes glued in its mounted on the lathe ready to turn. I use a roughing gouge to remove the bulk of the waste before switching to the skew to plane the blank down to the bushings. Once i have the desired shape I remove th

 

Starting the banjo thing
By: Blind Woodturner
August 01, 2017 · 407 views

In this live streamed episode I start to get the external dimensions underway.It will eventually become a lutherie hoop for a customer.You get to see some tech in use to help me with my measurements. Part 2 will be at 1 PM GMT tomorrow....Hope you can join me.

 

Oliver Parodi art.in wood (El Creador)..
By: Loquito tattoo
August 01, 2017 · 7 views

Created by VideoShow:http://videoshowapp.com/free

 

Banjo thingy
By: Blind Woodturner
July 31, 2017 · 377 views

Here is a taster of a live project I will be turning.It is an order for a local chap who like to do Lutherie.Join me if you can tomorrow at 1pm GMT to watch me get started on this project.

 

Bar Tap Handle Step by Step
By: George Fotinakes
July 31, 2017 · 89 views

Step by step instructions are given for making a exotic wood beer tap handle.

 

DIY Business Card Display / Woodturning Project
By: Carl Jacobson
July 28, 2017 · 10,083 views

In this video I made a business card display out of Maple. I used a coping saw to cut small groves to hold the cards. It's 14' tall and 4' in diameter. Tools used in the video: Lathe: http://www.turnrobust.com/ Turning tools: http://www.easywoodtools.com/ Turning tools: http://thompsonlathetools.com/ Howard wax: http://astore.amazon.com/thewood0c-20... Yorkshire Grit Hampshire Sheen RZ Mask: Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Face shield: http://astore.amazon.com/thewood0c-20... I upload a new project video every Friday, and I'm live Monday, Wednesday, a

 

Turning American Ninja Warrior Training Gear
By: As Wood Turns
July 28, 2017 · 1,636 views

http://www.AsWoodTurns.com My granddaughter watches American Ninja Warrior. She asked me to turn some training gear: 4 2.5' balls, 2 3' balls, 2 2' pistons, and 2 truncated cones. Who can refuse a 7 year old granddaughter? I turned them from Titan cedar. The balls are finished with only 80 grit sandpaper and beeswax and mineral oil mix. The others were not sanded and left unfinished. Enjoy. Turn A Perfect Wood Sphere Or Ball - No Expensive Jig https://youtu.be/3lConTQ-cUw Simple Wood Faceplates For Perfect Balls Or Spheres https://youtu.be/qMdz8moAQjA Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Traumerei by Shumann performed by Becky Schlappi. Used by permission.

 

Roberts Drechselbude - 2 Anhänger aus Eiche
By: Roberts Drechselbude
July 28, 2017 · 250 views

Heute mal was zum Umhängen. Es werden zwei Anhänger aus Eiche, die mit Ammoniak 'gebrannt' werden. Der eine Anhänger bekommt eine Perle in die Mitte, der Andere wird mit 'Off-Center' etwas bearbeitet. Das Finish ist wie meist eine Wachsmischung.

 

moremadepeg - Making a wooden peg on the lathe
By: Andras Peter
July 28, 2017 · 23 views

Second video I have ever made on my journey to learn to make videos. Me making a wooden peg on the lathe. (an other one)

 

Out of Round-Softball
By: woodturningwithtim1
July 27, 2017 · 15,740 views

for the fun of it... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Madepeg by APworks Making a wooden peg on the lathe
By: Andras Peter
July 27, 2017 · 46 views

I make stuff on the wood lathe. This is a quick try in video making, using WMM and a Samsung SX3000. I am learning. Me making a peg for a project. I might make more. Stuff and videos. Music by: Texas Techno by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Barometer - Episode 89
By: Paul Lockwood
July 22, 2017 · 332 views

After purchasing 3 barometers off eBay that were recovered from a fishing tackle shop that had closed down, I make a simple Oak case. This is sanded to 400 and finished with a mixture of layers using either plain shellac or shellac mixed with tung oil. Music Stars Collide By Josh Woodward http://freemusicarchive.org/music/Jos... From The Free Music Archive http://freemusicarchive.org CC Attribution 4.0 International https://creativecommons.org/licenses/... Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Turning Wooden Loom Pulleys
By: Mike Peace Woodturning
July 21, 2017 · 4,804 views

I demonstrate how to turn a wood pulley on a lathe. Someone asked me to turn 12 small, identical pulleys for a homemade loom project so this is the result. I alos talk about considerations in taking on a 'one off' turning commision project for someone. I upload a new woodturning tip every Wednesday and a woodturning tutorial video each and every Friday so Ya’ll come back, hear? You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Zozó Kaparófája woodturning cat scratching wood
By: Szabó János
July 21, 2017 · 3,197 views

Sziasztok! 10 éves kisfiammal Milánnal esztergálunk, és egy egy munkáról töltünk fel videókat. Aki szeretni látni hogy készül el fából pl egy tál vagy egy esztergált dolog akkor jó helyen jársz. facebook oldalunk: https://www.facebook.com/diszelifaesztergalyosok/ instagramm: https://www.instagram.com/szabojano

 

Lathe turning
By: SCCFORUM
July 15, 2017 · 112 views

 

Woodturning : Curly Sink with alumilite
By: SG Art Turning
July 11, 2017 · 79,028 views

Patreon : https://www.patreon.com/sgartturning Email : simgadoury@gmail.com You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg Web Site : https://sg-art-turning.com Facebook : https://www.facebook.com/SGTurning

 

#84 Oak Burr (Burl) Woodturning Wall Sculpture Project
By: M. Saban Smith Woodturning
July 06, 2017 · 5,685 views

Thoroughly enjoyed turning this weeks woodturning project video of a 21x13' oak burr (burl) wall hanging sculptural art piece. The main turning was done using a large plywood faceplate attached to a 130mm steel faceplate to give the piece as much stability as possible. After it was flattened down a bit, the rings were put in with a 3/8' bowl gouge before hand sanding and lightly burning the high points of the rings with a small blow torch, The colour was then applied. I used Ruby, Earth and Burnt Orange from my Intrinsic Colour Collection before overcoating that with danish oil. Finally, a

 

Woodturning A (firewood) Beer Bottle
By: Jerry Paul
July 04, 2017 · 223,916 views

I was chopping wood for a fire the other day and found this piece. I just couldn't burn it. I wasn't sure what I would turn from it at first, but then decided on something to commemorate the beautiful evening fire the night before. I finished the piece with Yorkshire Grit and Hampshire Sheen to give it a beautiful shine. https://www.paypal.com/cgi-bin/webscr?cmd _donations&business RK3D9P3RLYDFU&lc CA&item_name Jerry%20Paul%20TreeCreations¤cy_code CAD&bn PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted Snail mail: Jerry Paul Box 233 Kamsack, Saskatchewan Canada S0A 1S0

 

12 Cent Stick Pen and Refrigerator Holder
By: Mike Peace Woodturning
June 30, 2017 · 13,598 views

I demonstrate how to wood turn a 12 cent stick pen and a holder to stick it on the refrigerator using a rare earth magnet. Easy project for beginners and an inexpensive gift that does not take long to turn on your wood lathe. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Turning Over a New Leaf...by Cheryle Angelo (wyomingwoodturner)
By: WYOMINGWOODTURNER
June 20, 2017 · 9,140 views

After attending a demonstration at the Utah Woodturning Symposium by Raleigh Lockhart my wife Cheryle was inspired to make a turned leaf. Even though this was her first real turning project, she proved to be an excellent student. Link to Cheryle's video in which she 'practices' woodturning in preparation for turning her leaf. https://www.youtube.com/watch?v qSjdOCCPxvU&t 25s As Wood Turns --- Alan Stratton turns a leaf in the video (link) below https://www.youtube.com/watch?v FAISl3oQaUU

 

Cheryle practices for her Leaf Project: woodturning with Sam Angelo
By: WYOMINGWOODTURNER
June 20, 2017 · 2,367 views

My wife Cheryle takes time from turning her leaf project to practice a bit. She is a new woodturning student but proves to have excellent promise as a wood artist. Link to the Cheryle's video 'Turning Over a New Leaf' https://www.youtube.com/watch?v A8d3RCyIV7c

 

Woodturning with Tim Yoder Classics-Roman Canteen Part 2
By: woodturningwithtim1
June 19, 2017 · 25,866 views

Tim shows you how to make a Roman canteen, a turned vessel (made from goncalo alves) that holds water! A nice looking project and a clever turning process. Part 2 of 2. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Please support our sponsors. Without them we could not bring you these videos. Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Woodturning with Tim Yoder Classics-Roman Canteen Part 1
By: woodturningwithtim1
June 19, 2017 · 36,588 views

Tim shows you how to make a Roman canteen, a turned vessel (made from goncalo alves) that holds water! A nice looking project and a clever turning process. Part 1 of 2. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Please support our sponsors. Without them we could not bring you these videos. Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Out of Round-Biscuits
By: woodturningwithtim1
June 15, 2017 · 13,155 views

for the fun of it... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Ring Turned Flags
By: Tod Raines
June 15, 2017 · 2,103 views

Produced by Tod Raines of Woodturning Tool Store June 15, 2017 This technique refers to turning shapes in a ring form on the lathe and then cutting them out on a bandsaw. I have done some ring turning previously and this idea came to me after reading a bit more about it. Visit Woodturning Tool Store to shop for the Elio-DR https://woodturningtoolstore.com/product-category/lathe-accessories/ Social media links Facebook: https://www.facebook.com/woodturningtoolstore Google : https://plus.google.com/ TodRaines

 

Woodspin- Modelo Spiral
By: Woodspin Peonzas
June 14, 2017 · 4 views

No hace tanto tiempo desde que empezamos a hacer el modelo Spiral y con él introdujimos el color. Aquí tenéis un vídeo en cámara rápida haciendo una de las primeras piezas.

 

DIY Fancy Schmancy Screwdriver
By: SP Wood Art
June 13, 2017 · 2,516 views

In this video I wood turn a fancy screwdriver handle from a kit and two types of wood. The kit was purchased from PSI (PEN State Industries), and the kiln dried wood was from my shop. Screwdrivers make wonderful gifts and are great sellers for us. We have trouble keeping them in stock. Hope that you enjoy this addition to my channel. If you would like see more of SP Wood Art visit us at: www.spwoodart.com Our Webpage www.facebook.com/spwoodart www.plus.google.com/ SPWoodArt1/about www.pinterest.com/spwoodart/ I strive to create handmade, high quality wood pieces (and sometimes, crafts using

 

Toilet Roll Holder // Woodworking Project
By: Kuffys Woodwork
June 12, 2017 · 774 views

An awesome woodworking project making a toilet roll holder using Tasmanian Oak and River Redgum. This toilet roll holder looks fantastic on the wall of my bathroom and it is great to have a spare roll handy when it is most needed...we've all been there at least once! If you enjoyed this video, check out some of my other woodwork videos by following this link to my channel page. https://www.youtube.com/channel/UCtER3LFDf4u7Yfau76JGs3g I will be uploading new woodworking content regularly so be sure to subscribe to my channel to be notified when new videos are available. I am always interest

 

Disaster Recovery - Woodturning Style x 3
By: As Wood Turns
June 09, 2017 · 2,470 views

http://www.AsWoodTurns.com After I blew through the bottom of a beautiful bowl, I appealed for ideas on how to salvage it. The response was wonderfully broad and useful. Some would re-purpose the bowl as a lamp shade with an LED light; Others as a bird bath, a canning funnel, or a wall sconce. However, most involved filling the hole with different materials such as a matching wood, a contrasting wood, epoxy, colored resin, coins, medallions. Some would enlarge the hole before filling it; others would use it as is. Still others would expand the insert downward ranging from a short pedestal

 

woodturners box hinge
By: Jon Whateley
June 07, 2017 · 1,074 views

How to turn a round hinged box. Any shape can be turned and used with this quality round box hinge. These are ideal ring boxes and also make great gifts on their own when finished.

 

Woodturning Fidget Spinner Stands
By: Le PicBois
June 05, 2017 · 23,410 views

[ This is a collaboration with Ben from PressTube. I made some stands for his high quality brass spinners. Check it out! ] Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois __________________________________________ PressTube Channel: https://www.youtube.com/channel/UCZ3vyIYUy5yK0i-RJwpdoSg __________________________________________ Buy Woodturning Tools From Tommy G:

 

An Interesting Woodturning project
By: john Hawkswell
June 04, 2017 · 254 views

How Gloucestershire Association of Woodturners (GAW) helped to build a part for an aeroplane. For the technically minded the principal tool used in this turning was a roughing out gouge. To get a good finish the tools need to be very sharp or you need a lot of sandpaper.

 

Turning A Holly and Walnut Pitcher / Woodturning Project
By: Carl Jacobson
June 02, 2017 · 22,111 views

I turned this pitcher out of Holly wood, and the handle is Walnut. I used Lyle Jameson's hollowing rig to hollow out the inside. The flutes are made with the Flute Master. I finished the pitcher with Howard beeswax and orange oil. Tool Masters Association: https://www.izzyswan.com/tma-carl/?wpam_id 3 Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order TOOLS I USE IN MY SHOP: https://kit.com/CarlJacobson/woodturning https://kit.com/CarlJacobson/woodworking https://kit.co

 

Bowl, chalice and scarf clasps May 2017 MM
By: Motley Dog Woodturning
May 31, 2017 · 15 views

It's been a mixed week in the Motley Dog workshop; everything from roughing out some bowls from really old cherry to painstakingly shaping thin finials for a lidded chalice - and quite a few stops in between. This short video illustrates the journey. Apologies in advance for the shocking work by the cameraman - I'll give myself a good stiff talking to later.

 

Grit & Sheen Facebook Challenge No.1 - Hollow Form
By: Turning Works
May 28, 2017 · 577 views

This is my entry into the first ever Grit and Sheen Facebook group challenge! The vase is Ash and the stand is Walnut. I have not hollowed anything before as I don't own any hollowing tools, so thinking outside the box I made a tiny hollow form that I could hollow with a 6mm Spindle Gouge! Thanks for watching! Grit & Sheen Facebook page; https://www.facebook.com/groups/gritandsheen Yorkshire Grit; https://www.yorkshiregrit.com Hampshire Sheen; https://www.hampshiresheen.com

 

Stick to It!
By: Mike Peace Woodturning
May 26, 2017 · 5,086 views

I demonstrate a really easy and practical woodturning project – a refrigerator magnet. Actually I demonstrate five different ones so you can see different shapes, embellishments and methods of chucking. These are great little projects for absolute beginners or others that only have a bit of time and some scrap of wood and want to turn something. And they make great inexpensive gifts. Mine use a ” or 5/16” (6 – 8 mm diameter) rare earth magnet and are so much stronger than the store bought or souvenir quality you buy in a store! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Woodturning A (basic) Router Base For A Rotary Tool
By: Jerry Paul
May 26, 2017 · 1,247 views

I bought a rotary tool at a garage sale the other day. With it came a number of carving bits, some grinding and polishing bits plus cutting wheels and sanding disks. What was missing was a router base. I decided to make a simple one on the lathe.

 

Woodturning Tool Store - Spindle Turning Pod Covers
By: Tod Raines
May 21, 2017 · 162 views

Produced by Tod Raines of Woodturning Tool Store May 21, 2017 My wife has been a little obsessed with hydroponic gardening. I know the first thing you may think about but it is not that. A couple of Christmas’s ago she got two small Aerogardens which are LED based hydroponic gardens systems. So for this project I am turning some pod covers. Each system has ports for each pod or plant. Not all ports get used so covers are needed on these pod openings so nothing falls in. My wife bought a few covers but has run out so she asked me if I could make some. “Of course, honey” I said … and here we are. To hold the work, I will be using the newly introduced Elio-DR. This is an improved version of the Elio Safe Drive that is Drawbar Ready. Find the Elio and Elio-DR here: https://woodturningtoolstore.com/ Social media links Facebook: https://www.facebook.com/woodturningtoolstore Google : https://plus.google.com/ TodRaines

 

Cryptex part 2
By: Mauro il tornitore
May 19, 2017 · 809 views

A wooden cryptex on the lathe, second and last part. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Un cryptex di legno al tornio, seconda ed ultima parte. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

#82 Golden Fire Revisited. Woodturning Off Centre Sycamore Interior Design Wall Hanging
By: M. Saban Smith Woodturning
May 19, 2017 · 8,822 views

Twenty months ago, I turned a project called Golden Fire which has proven to be (so far) the most popular video on my channel...so I thought I revisit the project and come up with something different but vaguely along the same lines. The interior woodturning project is a coloured (dyed/stained) sycamore wall hanging that he been textured and accented with gold gilt. It's quite a simple technique, using three off centre positions, but the effect is fabulous. For the colour, I used Intrinsic Dyes (see http://www.msabansmith.com for purchased options (UK only)), the gold gilt was Liberon 'Trian

 

Corkscrew Pt 3
By: CL Woodturning
May 17, 2017 · 11 views

 

Corkscrew Pt 2
By: CL Woodturning
May 17, 2017 · 12 views

 

Corkscrew Pt 1
By: CL Woodturning
May 17, 2017 · 12 views

 

Project teaser
By: Dry Creek Woodturning
May 13, 2017 · 16 views

 

Cryptex part 1
By: Mauro il tornitore
May 12, 2017 · 750 views

Cryptex is a hollow cylinder that works like a bicycle's combination lock. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Il cryptex è un cilindro vuoto che funziona come un lucchetto a combinazione delle bici. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

Out of Round-Toilet Paper
By: woodturningwithtim1
May 11, 2017 · 12,414 views

for the fun of it... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Making A Wooden Hinge
By: Gord Rock
May 10, 2017 · 2,174 views

One method - of many - to make a wooden hinge. CNC router used, but can be done without one.

 

Woodturning a Decorative Jar Lid
By: Barry's Woodturning
May 05, 2017 · 3,515 views

In this video, I show how I turned a decorative lid to make an ordinary glass jar a bit more special. This is a fun and easy project, and if you know someone who is into canning, it also makes a nice gift. I use these jars in the workshop as well, for storing small batches of finishes. This minimizes waste and allows me to keep finishes fresh before I use them.

 

Drechseln einer Birne
By: Martin Preller
May 01, 2017 · 4,540 views

 

Oliver Parodi art.in wood
By: Loquito tattoo
May 01, 2017 · 9 views

Created by VideoShow:http://videoshowapp.com/free

 

Tie-Grr Maple WOODEN Tie : Making of
By: Michael Zurcher
April 26, 2017 · 3,666 views

Woodturning, Making, Creating: Wood ties ROCK! So In this video I show how I made a one piece wooden tie out of re-sawn tiger maple. I made this tie to wear down at the Atlanta woodworking show. The show was amazing & I met tons of awesome people there, really looking forward to the next event! Thanks for watching! Please feel free to comment, like, share, & I'd love to have you as a subscriber if you aren't already! :) Sticker swap? Send your sticker to the address listed below & I will send you one back. Thanks! :) Michael Zurcher 313 Gordon Drive Exton, PA 19341 Check out my Instagram here: https://www.instagram.com/michael_zurcher

 

How to make a segmented Guitar Pick
By: Gabe Castro
April 26, 2017 · 86 views

How to make a segmented guitar pick from off cuts of a segmented pen. Please like, and subscribe. Click link to buy Mini Lathe: http://amzn.to/2yzlyMs

 

Jerry on turning Moose antler
By: Nubsnstubs
April 26, 2017 · 144 views

I have this Moose antler I got 15 years ago, and cut the base off it to use for my Flintknapping. Tossing any antler is a crime in the Flintknapping world, so I kept it all these years. When I started turning, I always looked at it and wondered what could I do with it. Now, I finally did do something. I'm not absolutely happy, but I'm still ahead by having made myself a base for something. I'm sorry about all the I's, but it couldn't be helped .. Jerry

 

Turning the Cardinal Base Part 3
By: Derek Weidman
April 25, 2017 · 350 views

Working more on the Cardinal piece, this time building the base. http://derekweidman.com/ Video and Production done by Nicholas La Due Photography http://www.nicholasladuephoto.com

 

Mardi gras bead nightlight part 2
By: Rons Woodturning shop
April 23, 2017 · 49 views

Finishing up the project

 

 

Mardi Gras Bead Nightlight Part 1
By: Rons Woodturning shop
April 22, 2017 · 38 views

Making an acrylic nightlight with beads

 

Perfume bottle holder
By: SCCFORUM
April 17, 2017 · 156 views

Decided to make a container for this atomiser that I bought some time ago.

 

SPECIAL GUEST! A handy tool organiser - a school project by Kane!
By: Turning Works
April 17, 2017 · 752 views

This video is to show my son Kane making a project for his Design Technology class at his school. From initial design to finished item, this project has ALL been done by Kane. I am immensely proud of what he has achieved in such a short time - he had never been on a lathe before this, but he now wants to make more things in the future! The only part I helped Kane with was fitting the tenons in the mortices for the upright dowel - even seasoned wood turners have trouble with those! Thank you for watching! Take care, Dave and Kane

 

Frézer tartó
By: Szabó János
April 16, 2017 · 448 views

Sziasztok! Ebben a videóban egy fogtechnikai frézertartót fogok készíteni. Jó szórakozást hozzá! zene : https://www.youtube.com/watch?v _C1dfBeo374 Catas & Kasger - Blueshift [NCS Release] artist:NoCopyrightSounds Download this track for FREE: https://www.hive.co/l/2ag9c Support on iTunes: http://apple.co/2droZJ4 facebook oldalunk: https://www.facebook.com/diszelifaesztergalyosok/ instagramm: https://www.instagram.com/szabojano

 

#81 Woodturning an Off Centre Burr (Burl) Elm Wall Hanging
By: M. Saban Smith Woodturning
April 14, 2017 · 9,220 views

In this week's wood turning project, I demonstrate the techniques I used on the lathe to turn this off centre elm burr (burl) art wall hanging. It was great fun to turn and add a little colouring to. Here is an equipment and woodturning tool list for the stuff I used in the video: Lathe: Axminster 2030 Trade Lathe; Chuck: Nova's Super Nova Chuck with 120mm jaws and faceplate. Gouges: Robert Sorby 1.5' Bowl Gouge and 3/8th Spindle Gouge Scrapers: 1.5' Ashley Isles Scraper and 0.5' Sorby Scraper Stain/Dye: Black and Earth colours from my Intrinsic Colour Collection; Gilt: Liberon Versaille Oil

 

Fluorescent orange and green double reed duck call
By: Michael Gallinger
April 13, 2017 · 204 views

Turning a resin cast blank into a duck call, using a lathe.

 

Out of Round-Paper Towels
By: woodturningwithtim1
April 12, 2017 · 93,951 views

for the fun of it... You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Lid Fail lol
By: CL Woodturning
April 03, 2017 · 17 views

 

Wood turning - trying out Asian style (I made up lol) Toothpick holder Yew
By: CraftWithAfshin
April 01, 2017 · 4,481 views

Hey guys today i decided to turn a Toothpick holder which was request by 'Jack Maravola' a subscriber and very nice person, anyway i thought to myself maybe i could do something like Chinese house but on box for toothpick?? I guess if my lid blank was triangular shape it would of looked more like it... anyway let me know what you think thank you all for watching! I have set up Ebay shop since Im running out of space from all these turning so if your interested visit my shop and have a look, thank you all! http://www.ebay.co.uk/usr/afshincrafts

 

TURN A POLICE BATON, FROM START TO FINISH
By: TheThirdTwig
March 31, 2017 · 19,491 views

I will show you how to turn a police two part baton from start to finish. fun little project that takes about 45 minutes

 

Woodturning Curlies
By: Dry Creek Woodturning
March 30, 2017 · 90 views

woodturning green holly

 

Turn a simple foot roller
By: TheThirdTwig
March 29, 2017 · 121 views

Easy to do and great for beginners. Step by step on how to turn a foot roller.

 

zoetrope part one
By: Steve Krumanaker
March 28, 2017 · 1,040 views

This is a zoetrope, it's an old fashion animation player. Peter Brown did a video on this a couple years ago and ever since I watched his video I've wanted to make one of these. You can see Peter's version here. https://www.youtube.com/watch?v sULoZyqm_lI

 

zoetrope2
By: Steve Krumanaker
March 28, 2017 · 818 views

The second part of this project is largely basic spindle turning so much of it is fast forward. Thanks for watching!!

 

Bocote Darts - Set of 3 - Final Weight 17g (Soft Tip Darts)
By: FireFly Goods
March 28, 2017 · 49 views

Custom turned darts. These are turned in Bocote wood and are weighted at 17g each. This particular set was requested in 'Soft Tip', but ALL dart sets come with BOTH steel tips and soft tips included at NO EXTRA CHARGE!! If you would like a set similar click this link and check out our in stock items or get a custom item turned to your specifications. https://www.etsy.com/listing/239541117/hand-turned-darts-custom-hardwoord

 

Verandah Post
By: Ian Robbo Robertson
March 26, 2017 · 187 views

Verandah post. Normally I do big stuff but every now and again a small job comes in. 1/12th scale verandah posts for a dolls house.

 

Wood Working: Making more Fidget Spinners out of Purple Heart
By: Turning Round
March 25, 2017 · 478 views

In this Wood Working video I continue making spinners. I am Making more Fidget Spinner using purple Heart and cherry wood. These are fun little projects for any DIY person. They are just toys and my kids love them.

 

The Sycamore Sierra Button Click - Part 1
By: Ron Calverley
March 24, 2017 · 566 views

Turning the Sierra Button Click in Sycamore wood.

 

Making a Brush/Pencil Holder With a Lathe and Rotary Table
By: SegmentedTurner
March 20, 2017 · 1,512 views

I show how I use the lathe and a rotary table on a drill press to make a 21-hole brush/pencil holder. This is a step-by-step demonstration.

 

#184 Jarron en Roble Blanco para Leann
By: Miguel Sanchez
March 20, 2017 · 11,960 views

Este video tambien esta en Español sigue el enlace mas abajo. This video is also in English, click the link below. https://www.youtube.com/channel/UCyOE_zdEBv4UcK5a_a3Z6hA Miguel Sanchez 2: https://www.youtube.com/channel/UC2JiORNXY4uz2wg3hL1oLHA Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez http://www.tornoartesano.es mailto:miguel@tornoartesano.es

 

Wood Turning with Brett - Grandma's Birdhouse
By: Wood Turning with Brett
March 17, 2017 · 1,119 views

Present for my Nan for her birthday...

 

Calendario perpetuo Perpetual calendar
By: Mauro il tornitore
March 17, 2017 · 19,915 views

My entry for the 'Tree contest' issued by Dominic Bender. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Il mio video per il 'Tree contest' di Dominic Bender. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

Calclub
By: Ian Robbo Robertson
March 16, 2017 · 232 views

Unless you are experienced, turn the lathe off before putting timber in the lathe. Turning some Calisthenic clubs for a client. They are being painted and mounted on a board for presentations.

 

Woodturning with Tim Yoder Classics-Door Stop & New Robust Lathe
By: woodturningwithtim1
March 15, 2017 · 23,772 views

In this episode Tim Yoder takes delivery of his new Robust American Beauty lathe. As usual with Tim, nothing goes smoothly. Then to christen the lathe he turns an elegant door stop from Purpleheart wood. Woodturning with Tim Yoder: www.woodturningwithtim.com Robust Lathes: www.turnrobust.com Thompson Lathe Tools: www.thompsonlathetools.com

 

Wood Working: Making a Cherry Wood Fidget Spinner
By: Turning Round
March 14, 2017 · 1,463 views

Wood Working: Making a Cherry Wood Fidget Spinner. What is a fidget spinner you might ask? Well it is a toy, with a bearing in the middle and a fun shape. These have two ends and are shaped like a S. I made these using cherry wood and a band saw and a lathe. They were a fun little project and I did it with my kids.

 

Episodio 2 Serie Forma Hueca, Desbastado Rapido
By: Daniel Vilarino
March 14, 2017 · 40,776 views

Hola/Hi! ***This video is in Spanish, to watch it in English please click in the following link:*** https://youtu.be/u-L_KL_niFw Este video está en Español Este video es el segundo en una serie en la cual voy a ir mostrando varias técnicas que nos llevarán a la realización de una forma hueca. La primera fue encontrar el punto de balance entre puntas para poder levantar la velocidad del torno y facilitar el cilindrado de una pieza irregular. Dicho video lo puedes ver en el siguiente enlace: https://youtu.be/pwX7b75oUJI En este video, aprovechamos que la pieza está ya balanceada y que podemos

 

Wood turning Pepper tree Genie bottle by Al Furtado
By: Rebel Turner
March 12, 2017 · 32,314 views

Freshly cut Brazilian Pepper tree turned into a beautiful Genie Bottle. The worm eaten holes I the neck area posed more trouble than I anticipated. Beauty doesn't come without challenges. Join me in FB https://www.facebook.com/yournamegoeshere2 Follow me on https://twitter.com/AlbertFurtado57

 

Wood Turning with Brett - Purple Heart??
By: Wood Turning with Brett
March 09, 2017 · 1,763 views

my first reeeally hard wood

 

Making Hair sticks - Making Hairpins - Haarstab drechseln - Haarschmuck drechseln - DIY - Holzweger
By: Thomas Hilleke
March 07, 2017 · 14,203 views

mein Schleifer http://amzn.to/2miamgW oder der Dremel http://amzn.to/2mil6Mo Schleifmittel http://amzn.to/2milquA eine Drechselbank http://amzn.to/2ea0LDO und das passende WErkzeug http://amzn.to/2aU7HE4 Handycam http://amzn.to/2q3Blfo Kamera http://amzn.to/2pT0HQV ******************************************************************* Wer mich direkt und freiwillig unterstützen möchte, darf gern einen Blick auf meinen Wunschzettel werfen https://smile.amazon.de/registry/wishlist/3MP4KVU3C8HKT ******************************************************************* How to make a hair stick? In t

 

Woodturning With Naked Turner Baby Macanudo Cigar Canister
By: Erik Anderson
March 04, 2017 · 3,452 views

In this video I make a small canister fro a friend who asked me to make a cigarillo canister.

 

Another wooden spider and thorns - Un altro ragno di legno e spine
By: Mauro il tornitore
March 03, 2017 · 488 views

An olive wood spider and talking about thorns. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Vi presento un ragno in legno di ulivo e vi parlo delle spine. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

I Turned an Arrow Rest Removal Tool for the Archery Team
By: RJBWoodTurner
March 01, 2017 · 1,702 views

My kids all shoot on the archery team at school. Recently during a tournament the arrow rest broke on my daughters bow. The coaches swapped it for a new one but it was time consuming. Tonight I made a tool to speed up the removal. Regards, Bob My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

The Log - Part 9 (conclusion)
By: Ron Calverley
February 28, 2017 · 711 views

Turning an oak log for my neighbor.

 

The Log - Part 8
By: Ron Calverley
February 27, 2017 · 711 views

Turning an oak log for my neighbor.

 

#10 How to mount a lazy susan bearing
By: Miguel Sanchez Woodworks
February 24, 2017 · 9,458 views

Canal principal con Proyectos cada Martes: Main channel with new projects every Tuesday: https://www.youtube.com/user/Drizztss Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez www.tornoartesano.es miguel@tornoartesano.es

 

Ragno di legno - Wooden Spider
By: Mauro il tornitore
February 24, 2017 · 1,590 views

In my hundreth video a wooden spider. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Nel mio centesimo video un ragno di legno! Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

Spalted Red Maple shoehorn
By: Huntsville Woodturning
February 17, 2017 · 73 views

75% complete Spalted Red Maple spindle for a shoehorn with a brass cap and tongue. Time-lapse Photography,Time-Lapse Tool Video created and uploaded using http://timelapsetool.com

 

The 3 Minute Shift Knob
By: Matt Turns
February 13, 2017 · 41 views

The absolute easiest to turn shift knob. Now just part off the bottom bit of waste wood, drill a hole for the shifter, add your favorite stain and protective finish, and you're done!

 

Trådrulle Lampa Woodturning
By: Elias Klingvall
February 10, 2017 · 291 views

Trådrulle lampa gjord av valnöt och en nål av järn Gammelgarn Ängmans Snickeri Gotland Woodturned lamp made of walnut and a needle of iron Inspirerad av Simone Giertz: https://www.youtube.com/watch?v 1seENWiVxx8

 

Turning a Decorative Wooden Cartridge on the Lathe
By: Matt Turns
February 07, 2017 · 153 views

Check out the finished product and other projects on my instagram @matt_does_wood_turning I make a wooden cartridge on the lathe out of some scrap wood. Leave a comment if you have an idea for a future video. Thanks for watching! (sorry for the irregular video uploads, finding working editing software for cheap is difficult)

 

Flint and Steel
By: Maple-Crossing Woodworks
February 05, 2017 · 235 views

A simple fire starter kit with a few alterations. I added a neodymium magnet to hold the striker in the handle and filled some gaps with Milliput epoxy putty. Fun little project and the results are... striking Line Of Fire by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/ Training in the Fire by Twin Musicom is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://www.twinmusicom.org

 

Woodturning with Tim Yoder- Drum Set Cell Phone Speaker
By: woodturningwithtim1
February 03, 2017 · 22,359 views

Using Mahogany, Quilted Maple, American Holly and a bit of imagination Tim turns an ornamental 3 piece drum set that is also a passive speaker for your cellphone. Now you have a way to amplify and direct the sound from your phone and look cool too! For more information visit www.woodturningwithtim.com

 

Drechseln eines Untersetzers für Flaschen und Gläser / Turning a Bottle Coaster
By: Hobbydrechsler Thomas Pfahler
January 29, 2017 · 909 views

In diesem Video möchte ich euch zeigen wie ich einen Untersetzer aus Esche für Flaschen und Gläser mache. Wer mehr über meine Drechselsachen erfahren möchte ich habe auch eine Seite auf Facebook. Hier der Link: https://www.facebook.com/HobbydrechslerThomasPfahler

 

Yew Hat / Wig stand
By: woodturner21
January 28, 2017 · 11,106 views

A Hat / Wig stand in very well seasoned Yew.

 

#78 Turning an 'Ancient & Rusted' Malle Burr Wood Ornament
By: M. Saban Smith Woodturning
January 24, 2017 · 6,436 views

So this week, after three weeks or so of putting it together sees the reveal of the sister piece to that I've been showing off in Turner's Journey recently. Face-plate turning is not something I do much off, but this piece was entirely turned on a face-plate - and I loved it! This arty wood turning piece is malle burr wood from Australia and has been turned and sculpted on the lathe to resemble something rather old, almost fosillised, I guess. The ripples have been coated with Modern Masters Reactive Paint and the central boss has been given a copper leaf treatment. The back has been rusted

 

Hourglass
By: Maple-Crossing Woodworks
January 23, 2017 · 424 views

This was a New Years project I started working on late last year. Through making it, I got to use a few new homemade tools that made the process a lot easier. The frame and spindles are english walnut and the accents are black walnut. The video ended up being a lot longer that I had intended, but the project took a lot longer than anticipated. I hope you enjoy this!

 

Woodturning: Wood, Project, Fail, Project
By: SG Art Turning
January 21, 2017 · 229,817 views

My You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg My Web Site : https://sg-art-turning.com My Facebook : https://www.facebook.com/SGTurning

 

#173 separador de serrin, aun mas facil
By: Miguel Sanchez
January 17, 2017 · 13,228 views

Este video tambien esta en Español sigue el enlace mas abajo. This video is also in English, click the link below. https://www.youtube.com/channel/UCyOE_zdEBv4UcK5a_a3Z6hA Hablemos de torneado / Lets talk about woodturning: https://www.youtube.com/channel/UC2JiORNXY4uz2wg3hL1oLHA Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez http://www.tornoartesano.es mailto:miguel@tornoartesano.es

 

21 - Masher from Bowling Pin - Fail and Fix
By: Bill Rockwood
January 16, 2017 · 489 views

I turn a potato (or bean) masher, trying to use the remnant from the bowling pin I used to make a carving mallet.

 

Wood Turning with Brett - The Oak Gear Shift
By: Wood Turning with Brett
January 16, 2017 · 247 views

My take on an English Oak shaped gear shift with company logo

 

#172 ciclon para extraer serrin, efectivo y economico
By: Miguel Sanchez
January 15, 2017 · 23,192 views

Este video tambien esta en Español sigue el enlace mas abajo. This video is also in English, click the link below. https://www.youtube.com/channel/UCyOE_zdEBv4UcK5a_a3Z6hA Hablemos de torneado / Lets talk about woodturning: https://www.youtube.com/channel/UC2JiORNXY4uz2wg3hL1oLHA Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez http://www.tornoartesano.es mailto:miguel@tornoartesano.es

 

Vordrechseln einer Nussbaumschale
By: Hobbydrechsler Thomas Pfahler
January 12, 2017 · 1,064 views

In diesem Video möchte ich euch zeigen wie ich eine Schale aus Nussbaum vordrechsle. Wer mehr über meine Drechselsachen erfahren möchte ich habe auch eine Seite auf Facebook. Hier der Link: https://www.facebook.com/HobbydrechslerThomasPfahler

 

Making a Bead Spinner???
By: DIY with Uncle Cy
January 11, 2017 · 13,950 views

A spinning mini torus? Until recently I didn't even know what a Bead Spinner was. But as soon as I saw a picture of one I knew I had to to make one.

 

Exterior Baluster
By: Century Porch Post
January 10, 2017 · 139 views

3 1/2' square x 35' long baluster being turned at 8 times actual cutting speed.

 

Pevná luneta pro soustruh na dřevo DB 900
By: Jan Říha
January 09, 2017 · 714 views

 

The Log - Part 4 UpDate
By: Ron Calverley
January 08, 2017 · 1,093 views

Turning an oak log for my neighbor.

 

The Log - Part 4
By: Ron Calverley
January 07, 2017 · 1,265 views

Turning an oak log for my neighbor.

 

The Log - Part 3
By: Ron Calverley
January 06, 2017 · 1,484 views

Turning an oak log for my neighbor.

 

The Log - Part 2
By: Ron Calverley
January 05, 2017 · 1,431 views

Turning an oak log for my neighbor.

 

The Log - Part 1
By: Ron Calverley
January 04, 2017 · 1,737 views

Turning an oak log for my neighbor.

 

Woodturning Coin Collection Display
By: SG Art Turning
January 03, 2017 · 103,851 views

Facebook : https://www.facebook.com/SGTurning/ Web Site : https://sg-art-turning.com

 

Celtic Knot - Episode 47
By: Paul Lockwood
January 01, 2017 · 1,520 views

This is my first attempt at a Celtic Knot. Using a piece of apple for the main body and some hardwood from a pallet as inserts. I made three main mistakes on this project, 1 using the bandsaw to cut the slots, 2 not cutting the blank back to meet the inserts and 3 making the lid as an inside fit rather than siting on a collar. It was still a great fun project to do and a lot was learnt from the process so that next time I can hopefully make something a bit more perfect. Please go ahead and support Keith Barrow https://www.youtube.com/channel/UC1xj8Lp_fmCX0GXr208rP9w Music Show Me (Instrumental), Orbit (Instrumental) and With A Whimper (Instrumental) By Josh Woodward http://freemusicarchive.org/music/Josh_Woodward/ From The Free Music Archive http://freemusicarchive.org CC Attribution 4.0 International https://creativecommons.org/licenses/by/4.0/legalcode Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

How to Turn a Wooden Mouse
By: Mike Peace Woodturning
December 30, 2016 · 33,191 views

I demonstrate wood turning a cute little wooden mouse. The design credit for this fun, easy wood lathe project goes to some unknown Danish Modern designer from the 1960's or 70's. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Woodturning Project Flintstones Car AKA Flintmobile!
By: Carl Jacobson
December 30, 2016 · 14,546 views

The Flintstones is the first animated prime time American television series. I made Fred Flintstines car AKA the flintmobile. I used Maple Walnut and Bocote, it's 9' long and 7 1/2' tall. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robust dealer if you have any questions I'd be more than happy to help. Robust Woodturning Tools-http://www.turnrobust.com/ Easy Woo

 

Micro turning tool shelf
By: SCCFORUM
December 29, 2016 · 180 views

Needed a place for my Robert Sorby 5 piece Micro turning tool kit. So I made this simple shelf. Cheers Paul

 

BB-8 Follow-up
By: The Woodshop
December 26, 2016 · 1,399 views

Pepper Mill kits, http://www.chefwarekits.com/peppermill-kits Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robust dealer if you have any questions I'd be more than happy to help. Robust Woodturning Tools-http://www.turnrobust

 

Naked Turner Wire Bender
By: Erik Anderson
December 26, 2016 · 10,407 views

Quick look at me making wire holders for game controllers for a large controller art wall. 350 of these will be made when I am done.

 

Cioccolatini al tornio - Chocolates on the lathe
By: Mauro il tornitore
December 23, 2016 · 504 views

Merry Christmas and Happy New Year to everyone! Chocolates in molds from waste wood. . I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Buon Natale e Felice ANno Nuovo a tutti! Cioccolatini in stampi fatti al tornio da legno di scarto. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro

 

Bumpy, Tipsy, Wood Tube From Green Cherry
By: As Wood Turns
December 23, 2016 · 6,575 views

http://www.AsWoodTurns.com At the invitation from fellow woodturner, Sam Angelo, I turned this 2' by 7' tube from fresh wet cherry. This project is fun because when the turning is finished, I go to the microwave to heat it up. With a couple of excursions through the over, the tube warps and takes a shape of its own. The shape is only somewhat predictable. The wood blank is cut cross grain from one half of a log at one side of the pith. My process was: 1. Rough turn and cut a tenon on one end. 2. Reverse mount 3. Finish rough turning 4. Refine exterior. 5. Drill and hollow from one end. Best

 

Birds of a Feather Wood Turning Pt 2 of 2
By: Mike Peace Woodturning
December 22, 2016 · 7,446 views

I demonstrate woodturning a Danish Modern style bird from the fifties. The bird’s head can be tilted to express happiness, sadness, curiosity, and alertness. The body can also be turned upside down to exemplify different body types. Click here to watch Part 1: https://youtu.be/SvYfkx8ByHQ You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Birds of a Feather Wood Turning Pt 1 of 2
By: Mike Peace Woodturning
December 22, 2016 · 10,671 views

I demonstrate woodturning a Danish Modern bird designed back in the fifties. The bird’s head can be tilted to express happiness, sadness, curiosity, and alertness. The body can also be turned upside down to present different body types. Click here to watch part 2: https://youtu.be/lxDuJZ7kZU8 You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Birds of a Feather Woodturning - Short Version
By: Mike Peace Woodturning
December 22, 2016 · 3,054 views

This is a shortened version of my more detailed two part series on how to woodturn a Danish Modern bird. The bird’s head can be tilted to express happiness, sadness, curiosity, and alertness. The body can also be turned upside down to present different body types. Click here to watch part 1 of the detailed version: https://youtu.be/SvYfkx8ByHQ You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Turning a Decorative, Hollow Tube with Sam Angelo
By: WYOMINGWOODTURNER
December 13, 2016 · 8,242 views

Sam works through the best process for hollowing a decorative tube. He finally ends with drilling the tube blank between centers on the lathe. Sam mills the blank for this project from very wet birch. Drying wood properly is an important part of this project.

 

Toothpick
By: Erick Wood
December 11, 2016 · 22 views

Erick creates a toothpick tumbler out of Black Walnut. Enjoy!

 

Woodturning Q&A Airstream Follow-up
By: The Woodshop
December 05, 2016 · 1,082 views

Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robust dealer if you have any questions I'd be more than happy to help. Robust Woodturning Tools-http://www.turnrobust.com/ Easy Wood Tools-http://www.easywoodtools.com/ Wood Turner

 

#MH16 Skålar för Musikhjälpen 2016 Woodturning
By: Elias Klingvall
December 05, 2016 · 534 views

Skålar gjorda av alm, ask, ek och valnöt Till förmån för Musikhjälpen 2016 Gammelgarn Ängmans Snickeri Gotland Skål 1: http://www.tradera.com/item/340957/271023022/skal-for-musikhjalpen-1 Skål 2: http://www.tradera.com/item/340957/271023748/skal-for-musikhjalpen-2

 

Acorn
By: Rick Hutcheson
December 03, 2016 · 163 views

 

Adaptable Abstract Sculpture Desk Toy
By: As Wood Turns
December 02, 2016 · 4,008 views

http://www.AsWoodTurns.com Where do project ideas come from? Anywhere! This is inspired by a large object outside a building between the San Diego airport and the rental car center. I hope someone from San Diego can tell me what it actually is. The largest one is about eleven inches tall and three inches diameter. It is cedar finished with beeswax and mineral oil. This is a set of three. My vision is of a desk toy where I can play with their position and change it at will. Apparently what I saw were 'MetroGnomes'. Thank you John Fisher for identifying them. Thank you San Diego for inspiration. Good turning. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Traumerei by Shumann performed by Becky Schlappi. Used by permission.

 

Drechseln eines Notizhalters oder Bildständer aus Zwetschge
By: Hobbydrechsler Thomas Pfahler
December 02, 2016 · 2,507 views

In diesem Video möchte ich euch zeigen wie ich einen kleinen Notizhalter aus Zwetschge Drechsle. Wer mehr über meine Drechselsachen erfahren möchte ich habe auch eine Seite auf Facebook. Hier der Link: https://www.facebook.com/HobbydrechslerThomasPfahler

 

Le PicBois - Custom Fridge Magnets
By: Le PicBois
December 01, 2016 · 3,212 views

[ I made some rewards for my Patreon page. You can get one of those by clicking here: https://www.patreon.com/bePatron?u 640291&rid 1097323 ] Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois ___________________________________ Thanks to ALL my supporters on Patreon: Luis Gonzales, Ento Hamelin, Carl Jacobson, Olivier Coursol, Elaine Go, Brandon C., Corey Neuman, Tony Dew, Benoit Pelletier, Make Something, Get Hands Dirty, Jamie Page, Jackman Works, Scott Haun, Francis LaBrie, Alain Lebarbé & Jayson Nuckolls. You really make a difference! Thank you so much! ___________________________________ I work for free and I pay my director with cookies… Please help me to buy some flour by clicking on the link below: https://www.paypal.me/lepicbois

 

Ξυλοτορνος-Δουλευοντας με τον φίλο Αντώνη Ασπρακη
By: Kostas Annikas Deftereos
November 26, 2016 · 4,757 views

Τι πιο σημαντικό από το να μοιραζόμαστε την αγάπη μας για το χόμπι μας με φίλους που αγαπάν το ίδιο ! είχα την ευκαιρία αυτή την φορά να δουλέψω με τον φίλο Αντώνη Ασπριά !! ελπίζω να σας άρεσε το βίντεο έως την επομένη κυριακή κάλα να περνάτε ! Τον Αντωνη θα τον βρειτε και στα παρακατω λινκ !!! http://greekwoodcarver.blogspot.gr https://plus.google.com/114012933899990932792 μπορειτε να με βρειτε επισης στις παρακατω σελιδες facebook : https://www.facebook.com/annikas8 instagram : https://www.instagram.com/kostas_annikas_deftereos/ google : https://plus.google.com/u/0/ KostasAnnikasDeftereos

 

WOOD TURNING - Turning A Spurtle
By: TheThirdTwig
November 26, 2016 · 1,268 views

Let me take you through the steps of turning a Scotish Spurtle. THE THIRD TWIG

 

Turning A Maple Burl Gillette Razor
By: Casey Martin
November 22, 2016 · 902 views

In this video I make a Gillette Mach 3 razor out of Maple Burl. I try to keep the voiceover to a minimum and have music playing the majority of the time. Please let me know which you prefer! My site: www.WineCountryPens.com My blanks: https://www.classicnib.com/pen-blanks/wine-country-hybrids-by-casey-martin My email: casey@winecountrypens.com

 

Drechseln eines Flaschenöffners aus Nussbaum
By: Hobbydrechsler Thomas Pfahler
November 22, 2016 · 2,821 views

In diesem Video möchte ich euch zeigen wie ich einen Flaschenöffner aus Nussbaum Drechsle. Wer mehr über meine Drechselsachen erfahren möchte ich habe auch eine Seite auf Facebook. Hier der Link: https://www.facebook.com/HobbydrechslerThomasPfahler

 

Oak Paper Seed Pot Maker - Episode 39
By: Paul Lockwood
November 20, 2016 · 1,213 views

A quick Tuesday evening project for a change rather than one of my longer weekend pieces. This project was inspired by Steve Jones - Woodturner21 (links below). When I first saw this project a while ago on his YouTube channel it was ear marked as something to do. A recent post on this again on Woodchuckers (links below) reminded me of this project. If you watch Steve make this he is a genius with the skew and made the main body alone in under 2 minutes (real time). For me the process was a lot longer due to a few reasons. Firstly I was using a piece of green Oak, registering in most places

 

Roberts Drechselbude - 4 Hölzer ein Häusle
By: Roberts Drechselbude
November 17, 2016 · 1,812 views

Heute mal ein Dekoartikel. Hatte gerade ein paar Hölzer übrig, so besteht das Vogelhäusle aus vier unterschiedlichen Sorten.....

 

WOODTURNING A LOGO FRIDGE MAGNET!
By: Nick Zammeti
November 16, 2016 · 3,258 views

Here the links to if you want to know where i got some of these products to make this Logo Fridge Magnet. Also a link to Jim Overtons Youtube channel. check him out https://www.youtube.com/channel/UC6h82LH3PtdiSHaj_7f09Fg Arber Press https://www.machinemart.co.uk/p/clarke-ap500b-1-2-ton-arbor-press/?da 1&TC GS-020415172&gclid CjwKEAiApLDBBRC8oICb9NvKsg0SJAD9yOHs-sb3qmxTeEAjW79KWJ4o9_0LoAW0--8sdmY8ZtGg7RoCA_jw_wcB Brass Logo Stamp https://www.etsy.com/uk/people/vonhanke Leather from Ebay http://www.ebay.co.uk/itm/181268169879?_trksid p2057872.m2749.l2649&var 480297360378&ssPageName STRK%3

 

Wood Turning a Fire Starter
By: SP Wood Art
November 13, 2016 · 8,911 views

If you like wood turning and the outdoors this project is for you. You can make fire starters from kits, or buy each piece separate. This is a quick project to complete other than glue time and would make excellent gifts. I hope you enjoy this video. If you would like see more of SP Wood Art visit us at: www.spwoodart.com Our Webpage: http://spwoodart.wixsite.com/spwoodart www.facebook.com/spwoodart www.plus.google.com/ SPWoodArt1/about www.pinterest.com/spwoodart/ I strive to create handmade, high quality wood pieces (and sometimes, crafts using other mediums such as natural stone or acryli

 

Woodturning Project Pouring Wood!!
By: Carl Jacobson
November 11, 2016 · 26,971 views

This is the second piece in my pouring wood series. I utilized a natural crack in the scoop to mount the base to the scoop. It's 9' tall the scoop is Maple burl, and the base is Apple wood. My Q&A Channel-https://www.youtube.com/user/Thetuningshop Here's a link to some of the tools I use in my videos http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson Schedule

 

THE HOBITS HOUSE!
By: Nick Zammeti
November 11, 2016 · 9,243 views

I made a hobits house, i think anyway. either that its a littel bird house. haha .. hope you like it. SUBSCRIBE TO ME ON YOUTUBE HERE https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA FOLLOW ME ON TWITTER https://twitter.com/NZWoodturning PLEASE LIKE MY FACEBOOK PAGE https://www.facebook.com/nzwoodturning/ INSTERGRAM https://www.instagram.com/nickzammeti/?hl en MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ YORKSHIRE GRIT http://yorkshire-grit.com/ PLEASE ALSO CHECK OUT MY NEW VLOGGING CHANNEL. IT’S CALLED NIKOLAI SCOTT VLOGS. MY NEW CHANNEL https://www.youtube.com/channel/UCAQsI9pUgViHsOOya-J3sTQ

 

Torneado en madera; Fuente coigüe campana
By: Heinrich Garcia
November 10, 2016 · 2,043 views

FUENTE COIGÜE CAMPANA

 

Basic Thermometer Mount - Episode 36
By: Paul Lockwood
November 08, 2016 · 556 views

A very simple project using a piece of spalted beech to create a mount for a small thermometer I bought from eBay. These are classed as guitar / violin case thermometers. Rushed the project a little and the shaping is nowhere as good as it should be. Sanding sealer, Yorkshire Grit and Woodwax22 finish it off. Music Instrumental By Josh Woodward http://freemusicarchive.org/music/Josh_Woodward/ From The Free Music Archive http://freemusicarchive.org CC Attribution 4.0 International https://creativecommons.org/licenses/by/4.0/legalcode Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Weihnachtliche Holzkerze Drechseln
By: Hobbydrechsler Thomas Pfahler
November 06, 2016 · 9,473 views

In diesem Video möchte ich euch zeigen wie ich eine Holzkerze Drechsle, Weihnachten kommt schneller als wir denken :-) Wer mehr über meine Drechselsachen erfahren möchte ich habe auch eine Seite auf Facebook. Hier der Link: https://www.facebook.com/HobbydrechslerThomasPfahler

 

Bocote Darts - Set of 3 - Final Weight 21g
By: FireFly Goods
November 05, 2016 · 57 views

Custom turned darts. These are turned in Bocote wood and are weighted at 21g each. If you would like a set similar click this link and check out our in stock items or get a custom item turned to your specifications. https://www.etsy.com/shop/FireFlyGoods?section_id 15900276

 

Gancalo Alves Darts - Set of 3 - Final Weight 21g
By: FireFly Goods
November 05, 2016 · 50 views

Custom turned darts. These are turned in Goncalo Alves wood and are weighted at 21g each. If you would like a set similar click this link and check out our in stock items or get a custom item turned to your specifications. https://www.etsy.com/shop/FireFlyGoods?section_id 15900276

 

DIY Narrow Awl
By: Barry's Workshop
November 04, 2016 · 759 views

I made this 1/8' awl using some O1 steel that I purchased, a short piece of copper pipe, and a scrap piece of hickory. I can use this awl to scribe a line, mark a point, and even drill a hole through a board. Subscribe: http://www.youtube.com/subscription_center?add_user UCYrXvMdKbXYtONur3rnRHcg 'Lobby Time', 'On My Way', 'Slow Burn' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0

 

Tokar Art 72 WoodTurning 'Orion SuperStar'
By: Dipa Das
October 23, 2016 · 17,602 views

Four Squares.. BIG Square Plate (Beech 50x50cm) with Bowl inside with Square Pedestal with Square Lid with Square Top.. :-) Biggest work on my Lathe to this time.. Here we Go! Orion Super Star !!

 

Roll Holder
By: Jake Webb
October 22, 2016 · 260 views

A quick scrap wood project. All the turning is real time and voice over free. I have been meaning to make one of these for the kitchen for some time & already have one in the workshop. Its a good beginner skills project. If you are doing your own, its a project you can style to your own tastes. Have fun. My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

A Turned and Coloured Wood Tulip intro
By: mark's creative turnings
October 21, 2016 · 211 views

Turning A Tulip out a block of Maple

 

Roberts Drechselbude - 'Schalenkalender'
By: Roberts Drechselbude
October 19, 2016 · 933 views

Heute gibt es mal ein Video zum Thema: Viele, viele Schalen. Zwölf Stück sind es also geworden und so kann man gut und gerne von einem 'Schalenkalender' sprechen.

 

Multi Axis Eagle
By: Peter Matthew
October 13, 2016 · 572 views

Check out how I turned this multi-axis eagle at a Derek Weidman workshop! www.peterturnswood.com

 

Solid Wood Ribbon
By: Fiaschetti Woodworking
October 12, 2016 · 7,874 views

This piece is available for purchase at http://www.fiaschettiwoodworking.com/ This sculpture is made of 150 pieces. I felt that it was fitting to use 'lace'wood to make a ribbon (the stripe through the middle). The other two woods are maple (the light wood) and north american black walnut (the dark wood on the outside). This took around 39 hours to complete. This piece is for sale. Please email me at fiaschettiwoodworking@gmail.com

 

woodturning
By: Harry’s Woodcraft
October 11, 2016 · 1,972 views

woodturning. A few small pieces from a piece of salvaged Wood, And a practice with my hollowing tools. Music: Artist: Michael Chapman & The Woodpiles Songtitel: A Stranger's Map of Texas URL: http://freemusicarchive.org/music/Mic... Copyright: Attribution-NonCommercial: http://creativecommons.org/licenses/b... Artist: Sláinte, Titel: Kesh Jig, Leitrim Fancy URL: http://freemusicarchive.org/music/Sli... Copyright: Attribution-Share Alike 3.0 United States: http://creativecommons.org/licenses/b... Thank you for watching Please like, share and subscribe You can also follow me on: facebook: https://www.facebook.com/harrybrian.watts Instagram https://instagram.com/harrys_woodcraft/ twitter: https://twitter.com/HarrysWoodcraft

 

Multi Axis Face
By: Peter Matthew
October 10, 2016 · 1,280 views

Check out this awesome multi-axis face I made :)

 

Toothpick
By: Ian Robbo Robertson
October 04, 2016 · 189 views

Turning a toothpick after being challenged by a friend that I wouldn't/couldn't do it on the big Wadkin.

 

Walnut Dragon Egg Part 3 (base and legs)
By: Daniel Vilarino
October 03, 2016 · 1,411 views

Hola/Hi! Este video está en Inglés, si prefieres verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/ZKezWhIv9OE ***This video is in English*** Esta es la tercera y última parte del proyecto del huevo de dragón. En este tercer episodio, realizo la base de apoyo en nogal con sus patas en chak te koke. ***This is the third and last part of the dragon egg project. In this third episode I make the walnut base as well as the red heart legs.*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a m

 

A piece of pine and some time
By: Rich McNatt
September 29, 2016 · 1,527 views

This is a gift for a fellow Youtuber, ( If the wife does not decide to keep it for herself..)

 

Walnut Dragon Egg, Part 2, the finial
By: Daniel Vilarino
September 23, 2016 · 1,248 views

Hola/Hi! Este video está en Inglés, para verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/Y3O5iSJ231s ***This video is in English*** Este es el segundo episodio de una serie de tres en los que estoy construyendo un huevo de dragón con tirador y base con patas. En el primer episodio había hecho la caja con forma de huevo con una pieza de Nogal. En este episodio muestro como hacer el tirador o puntero con forma de cola de dragón en Chak Te Koke. En un tercer episodio mostraré como hacer la base y las patas de la misma para sostener todo el conjunto. ***This is

 

Turning Zucchini
By: Conover Workshops
September 23, 2016 · 822 views

This video is about Turning Zucchini in a woodturning lathe

 

Banana bowl answer to Braxtons challenge
By: Rich McNatt
September 23, 2016 · 728 views

Good ol Braxton called me out to turn a 'banana' bowl. Braxton https://www.youtube.com/channel/UC9I3Vn0EtNbds4HXuOwaHcg Chris : https://www.youtube.com/user/customchevy03 If you would like to own this bowl and help support St. Jude's Children's Hospital cancer research, Message me your bid I will keep the 'bidding open until Oct 14th 2016. I will cover up to 20.00 in shipping.

 

making a wooden sculpture
By: ben wynn creations
September 19, 2016 · 232 views

 

TWWS Tampa Outboard Turning
By: The Studios of Bradley R.M. Woodturning
September 19, 2016 · 989 views

This is a quick clip from The Woodworking Shows while in Tampa FL in the spring of 2016. It's not the complete process. I cut this while waiting for phone calls ! There will be more this fall ...

 

Walnut Dragon Egg Part 1
By: Daniel Vilarino
September 14, 2016 · 1,920 views

Hola/Hi! Este video está en Inglés, si prefieres verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/DMB3gmbNGsM ***This video is in English*** Este es el primero de una serie de dos videos en la cual haré un huevo de dragón en Nogal. En este me dedico a hacer la caja con forma de huevo, en un video posterior haré el tirador y la base. ***This is the first of a series of two videos in which I will make a walnut Dragon egg. In this part 1 I make the box with the egg shape, and in the next video I will make the finial and the base.*** Enlace para el canal de You

 

Making A Wood Ships Wheel
By: Colbe Pease Woodworking
September 14, 2016 · 9,797 views

In this video, Imake a ships wheel, like you would find on pirate ships. it was kind of a spontaneous project that I decided to do.

 

Woodturning - Cigar Ashtray
By: Jason Lowrie
September 13, 2016 · 22,971 views

Wood turned cigar ashtray made from maple. Finished with propane torch and walnut oil. Music: Cherubs by Josh Woodward, Album: Ashes Motionless Land by Josh Woodward, Album: Ashes Available for free from www.freemusicaarchive.org

 

Woodturning Project Follow-up
By: The Woodshop
September 12, 2016 · 2,007 views

This is the Follow-up for the Honeypot, and Knife holder. I turned these projects in the last couple weeks. Channels to look at. David K-https://www.youtube.com/channel/UCpFp4Xo5-h0Zx0DG1-x6f8A Pat Lap-https://www.youtube.com/channel/UCcM_SykaFqrxVnq52MjI6UA The Sonoran Woodshop-https://www.youtube.com/channel/UCCeLkQ_o3NLtF_b3-HOIr-A Kid in a shed-https://www.youtube.com/channel/UCcTMOmRlu9DR88B3qhUtU0A Woodturning with Owen-https://www.youtube.com/channel/UCslgQJv4qdPc1OzIGluto9w Here's a link to some of the tools I use in mt video, http://astore.amazon.com/thewood0c-20 I upload a new pr

 

Woodturning Project Dripping Wood Honeypot
By: Carl Jacobson
September 09, 2016 · 107,670 views

This piece was inspired by Fernando Verez Tojeiro, and Gerrit Van Ness. I used Maple, and Walnut to make this piece. It's 8 1/2' tall and 6' at the base. Fernando Verez Tojeiro-https://www.facebook.com/fernando.vereztojeiro Gerrit Van Ness-http://www.gerritvanness.com/artist.html Tools I used in this video Lathe Robust: http://www.turnrobust.com/ Easy Wood Tools: http://www.easywoodtools.com/ Thompson Lathe Tools: http://thompsonlathetools.com/ Howard beeswax: http://amzn.to/2zAv185 Band saw: http://amzn.to/2AlMUEP DA Sander: http://amzn.to/2zzEmN9 Face Shield: http://a

 

Turning Lanyard Beads on Lathe, for bushcraft and multiple other uses
By: Jim Overton - Jimson's Stuff
September 06, 2016 · 15,633 views

The bog oak was a gift from my friend Alan Simpson. Alan had it dated by dendrochronology to be from AD992 to AD1266. These beads are a great addition to a bushcraft knife lanyard or can be used for multiple other things. The bog oak used in this video was cut from the same piece used in the making of the knife in my previous video. My name is Jim Overton, welcome to my channel. Thanks for watching. Please like, share and subscribe. Yorkshire Grit is available from, http://yorkshire-grit.com/ Disclaimer Woodturning is potentially dangerous! My videos are designed to give viewers creative ideas. The way I work is not necessarily the best or safest way to work! Your safety is your own responsibility not mine. Please follow all safety procedures and wear personal protective equipment. Wear a visor and a respirator dust mask at all times. Be safe, be creative and enjoy your turning.

 

Turning Warm-up
By: Rich McNatt
September 05, 2016 · 400 views

 

WOOD TURNING - Turn a Billy Club
By: TheThirdTwig
September 05, 2016 · 16,610 views

I will take you through the steps of turning a Billy Club from start to finish THE THIRD TWIG

 

Make Money With Sweet Gum Balls
By: dc9apu
September 03, 2016 · 6,604 views

This video is about Make Money With Sweet Gum Balls E-mail: curmudgeoncalls@gmail.com

 

DIY Kitchen Knife Storage - Woodturning Project
By: Carl Jacobson
September 02, 2016 · 19,057 views

I made this unique knife storage container. I turned it using a lathe, and inlayed Milliput to make a tree silhouettes. Milliput is a two part epoxy putty. The knife holder is 9' tall and 5' dia and made out of Maple burl. Waxhaw Woodturners http://www.waxhawwoodturners.com/ Tools and Supplies use in the video. Wood-Maple Burl 10' x 5' Roughing Gouge: http://astore.amazon.com/thewood0c-20/detail/B0036B682E East Rougher: http://astore.amazon.com/thewood0c-20/detail/B0039ZYQ4Y Easy Detailer: http://astore.amazon.com/thewood0c-20/detail/B0039ZYQ4Y Easy Finisher: http://astore.amazon.com/thewo

 

Crystal Display Stand - Episode 25
By: Paul Lockwood
September 01, 2016 · 242 views

A simple project for my daughter. She got one of those stone crystals you have to break apart with a hammer. This simple stand was to display the half of crystal that she has. Just using pallet wood again that was used in the last couple of projects. The finish was around 5-6 coats of my Shellac mix and two coats Woodwax 22. Music I Will Not Let You Let Me Down, This Is Everything, Hollow Grove By Josh Woodward http://freemusicarchive.org/music/Josh_Woodward/ From The Free Music Archive http://freemusicarchive.org CC Attribution 4.0 International https://creativecommons.org/licenses/by/4.0/legalcode Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Woodturning with Tim Yoder-Holiday Acrylic Stained Glass Globe
By: woodturningwithtim1
August 31, 2016 · 71,545 views

Tim turns a festive acrylic faux stained glass, illuminated globe for the holidays. He also creates a wood base to hold the globe. Materials used: LED Starry String Lights https://www.amazon.com/gp/product/B01J5M2YF2/ref oh_aui_detailpage_o00_s00?ie UTF8&psc 1 Plaid Gallery Glass Window Color Promoggi Paint Set https://www.amazon.com/gp/product/B00ATJSDHY/ref oh_aui_detailpage_o01_s00?ie UTF8&psc 1 Pebeo Vitrail Stained Glass Effect Self Adhesive Lead Strip https://www.amazon.com/gp/product/B00462P58U/ref oh_aui_detailpage_o01_s00?ie UTF8&psc 1 Carter Perfect Sphere Tool http://www.carterproducts.com/lathe-parts-accessories/perfect-sphere

 

#70 Woodturning and Double Sided Sycamore Ornamental Deocoration Wall Hanging
By: M. Saban Smith Woodturning
August 30, 2016 · 5,006 views

This week, I turn a decorative wall hanging from sycamore with textures made by a spiralling tool and dremel. The whole piece was the decorated using gilt cream, stain and metal leaf. See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list! *Keep up with my socially!* Facebook: http://www.facebook.com/msabansmith Twitter: http://www.twitter.com/msabansmith Google : https://plus.goo

 

Woodturning a Medallion Ornament
By: Mike Peace Woodturning
August 19, 2016 · 5,338 views

I demonstrate woodturning a simple medallion Christmas ornament using a glue block and a jam chuck. It is basically like a tiny plate and serves as a canvas for any variety of decorating or embellishment. This is great collaboration with other family members who may like to paint or decorate. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Leather Logo Fridge Magnets
By: Jim Overton - Jimson's Stuff
August 15, 2016 · 1,774 views

My name is Jim Overton, welcome to my channel. Thanks for watching. Please like, share and subscribe. A massive thank you to my brother Doug for helping me with my logo. If you like Dragonflies then check out his youtube channel https://www.youtube.com/user/NewForestDragonflies Disclaimer Woodturning is potentially dangerous! My videos are designed to give viewers creative ideas. The way I work is not necessarily the best or safest way to work! Your safety is your own responsibility not mine. Please follow all safety procedures and wear personal protective equipment. Wear a visor and a respirator dust mask at all times. Be safe, be creative and enjoy your turning.

 

Irish Pub Tap Handles
By: Kyle Toth
August 11, 2016 · 18,919 views

Subscribe to my channel https://www.youtube.com/channel/UCn_4... I made these custom tap handles for an Irish Brew Pub in Camarillo California. They are made in Maple, Paduk and Walnut. The tops are layered engraved and then painted and the bases are turned on the lathe. The bottom base is made of stainless steel and hand a threaded insert on the bottom so it can be screwed to any tap. Thanks for watching! If you would like to support me and help me make more videos check out https://www.patreon.com/woodbytoth For inquiries and commissions contact woodbytoth@gmail.com To keep up with my

 

Ξυλοτορνος - Δημιουργωντας την κυρια Ολιβια , Woodturning - Making the lady olivia
By: Kostas Annikas Deftereos
August 07, 2016 · 8,423 views

This is one of the project that i always like to try !!! i hope you like it also ! .I like to thanks people that inspired me to make something like that !!! Carl Jacobson is one of them !! https://www.youtube.com/user/haydenHD and a similar video !!! https://www.youtube.com/watch?v 0srU6qjg_H0 check his channel he is an amazing artist and a very good person !!!

 

Jellyfish LED Light Woodworking Project
By: Carl Jacobson
August 05, 2016 · 19,270 views

Last week my wife and I were at the beach, and ran across these Jellyfish sea shells. My first thought was how cool! My second thought was how can I turn this into a woodworking project. Here's what I came up with! This LED accent light stands 15 1/2' tall. I used Maple burl for the base, Myrtlewood for the tentacles, Osage orange for the body. The amber tube is acrylic that I heated up with a torch to bend it. Tools and Supplies I used: Lathe Robust: http://www.turnrobust.com/ Easy Wood Tools: http://www.easywoodtools.com/ Thompson Lathe Tools: http://thompsonlathetools

 

Ciondolo o soprammobile a spirale - Saueracker Shell
By: Mauro il tornitore
August 05, 2016 · 858 views

A spiral shape turned for the first time in the early 1900s by the German turner Saueracker. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Una forma a spirale ideata dal tornitore tedesco Saueracker agli inizi del Novecento. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro

 

Woodworking with My Nephew - Hat Rack
By: Jason Lowrie
August 01, 2016 · 168 views

Freemusicarchive.org Scott Holmes - Oceans Apart - Music for Commercial Scott Holmes - Inspiring Corporate - Music for TV & Film Scott Holmes - Happy Go Lucky - Music for Media Scott Holmes - Duck Pond - Music for TV & Film

 

flat bottle 'Ghost Turning' (sawdust rd. woodshop)
By: Johnny Boudreau
August 01, 2016 · 128 views

Its been a while since I have stood in front of the lathe, good familiar feeling. Found this beautiful piece of Birdseye Maple and the flat bottle seemed like a good way to show off its features. Hope you enjoyed this short turning and thanks for watching. Johnny Music by Rusty Guitard

 

The Wooden Tea Pot
By: Nick Zammeti
July 30, 2016 · 14,215 views

This pot I made as a request form a customer in Denver. its a tea pot for English Tea. I used a food safe product here from Chestnut. I bought this from John Davis Woodturning http://johndaviswoodturning.com/ I bought my fire writer from Yandles as this was the cheapest place I found it www.yandles.co.uk Miliputs can be found on most websites but here's a few links for you. http://www.milliput.com/products.html http://www.hobbycraft.co.uk I get my emblems from a place in Birmingham. here's the link below ask for Robert http://www.beerbranding.co.uk/ Music is provided by Bensound. Music: http://www.bensound.com Thanks for watching and please don't forget to like, share and subscribe. All the best

 

Olive Wood Shaving Set for Fernando
By: Daniel Vilarino
July 28, 2016 · 902 views

Hola/Hi! Este video está en Inglés, si prefieres verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/73MsUEL9HTg ***This video is in English*** Este video está dedicado a Fernando en sus 90 años. ***This video is dedicated to Fernando in his 90 years.*** En este video he torneado un set de afeitadora, brocha y soporte, todos con mangos de Olivo de Belén. ***In this video I turned a set of razor, brush and support in olive wood from Bethlehem.*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríb

 

Woodturning Q&A Cryptex Follow-up
By: The Woodshop
July 25, 2016 · 1,481 views

Sterling Davis-Pallet Up Cycle Challenge 2016 https://www.youtube.com/user/SterlingsWoodcrafts Waxhaw Woodturners NC http://www.waxhawwoodturners.com/ I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robust dealer if you have any questions I'd be more th

 

How To Make A Cryptex
By: Carl Jacobson
July 22, 2016 · 51,879 views

In this video I demonstrate how to make your own Cryptex. What is a Cryptex? A Cryptex is a puzzle box. All the rings rotate independently of the others to create a different combinations of letters or symbols. I put together a list of some of the tools I use in my shop (affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link: https://www.amazon.com/shop/thewoodshoptv Carolina Shoe: https://www.carolinashoe.com/Products?page 1&gender Mens&sorting Popularity Use Carolina10 at checkout for a discount. Starbond CA Glue: https://www.starbond.com/ use S

 

#7 Woodturning a reliquary - Zebrano Wood
By: PolishWoodturner
July 21, 2016 · 3,376 views

My customer has ordered a reliquary as a gift for his mom. She has a soil from Jerusalem but she has no place to store it. Firstly, I wanted to use a olive wood which is very popular in that region but it's quite expensive. So, I decided to use zebrano wood. It's an exotic piece of wood which is pretty hard and looks quite similar to the olive wood. I finished it with a danish oil. This movie isn't complete as my smartphone died during recording second part of the video. I am really sorry... Hope you like it anyway. -------------------------------------------------------------------------------------- If you like this video and want to see more please subscribe to my channel!:) Please feel free and leave your comment. I really appreciate it. -------------------------------------------------------------------------------------- Music: bensound.com

 

Q&A Cryptex and PokeBall
By: The Woodshop
July 18, 2016 · 1,087 views

I wasn't happy with the Cryptex video, so I'm fixing it and it will be up this Friday. Instructables http://www.instructables.com/id/Pokemon-PokeBall/ I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robust dealer if you have any questions I'd be more th

 

Pokemon Go - PokeBall
By: Carl Jacobson
July 13, 2016 · 69,123 views

GET UP, GET OUT, AND EXPLORE! Make your own PokeBall! You use your phone to walk around catching Pokemon. This was a fun one, I really enjoyed making this Pokeball, and we got to dress up Jack as Beedrill. The project only took me about an hour to finish. I have no idea what this is, but the kids told me it's huge right now! So can I make one? I think it's genius, it gets the kids up and moving. Tools used in the video- Robust Lathe: http://thewoodshop.tv/robust-lathe/ Roughing Gouge: http://astore.amazon.com/thewood0c-20/detail/B0036B682E Easy Rougher: http://astore.amazon.com/thewood0c-20

 

Flaschenöffner drechseln
By: Martin Preller
July 07, 2016 · 9,795 views

über YouTube Capture

 

#65 Woodturning and Decorating an Emerging Figurine 'Grace'
By: M. Saban Smith Woodturning
July 05, 2016 · 6,015 views

Back to decorating with Modern Masters Reactive Paints this week in a video and piece inspired by Yuval Lahav's emerging form work. 'Grace' is an elegant figuring turned from Ash with a natural edge base and natural edge hat. Both of which have been finished with bronze reactive paint. Head over to Yuval's channel to discover his emerging forms and other great turning: https://www.youtube.com/user/yuvallahav See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .p

 

Reloj de Arena con diseño de Timón hecho en Nogal
By: Daniel Vilarino
July 05, 2016 · 22,654 views

Hola/Hi! ***This video is in Spanish, if you prefer to watch it in English, please click in the following link:*** https://youtu.be/ojHPYoIAVKU Este video está en Español. En este video, preparo un reloj de arena en nogal, torneando 39 piezas individuales y ensamblándolo con cianoacrilato. Uso un accesorio especial para hacer perforaciones bien horizontales y también el sistema de indexado del torno. ***In this video I prepare a walnut hourglass clock, wood turning 39 separate pieces and assembling everything with CA glue. I use a special jig to make perfectly horizontal perforations and als

 

Woodturning Q&A How To make A Yin Yang Template.
By: The Woodshop
July 04, 2016 · 4,018 views

Mike shared his process for making the Yin Yang template. Todd- Bowls For Good https://www.youtube.com/watch?v d1n8QjetJP8 Bowls For Good FB https://www.facebook.com/BowlsForGood/ Yorkshire Grit http://yorkshire-grit.com/ I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68

 

Linda's Handle
By: Jeremy Edwards
July 04, 2016 · 234 views

I turned this Maple Handle for my Aunt Linda's Chaffing Dish. Enjoy!

 

E46 - All in a Mess, and Got Some Turning Done!
By: M. Saban Smith Woodturning
July 01, 2016 · 1,663 views

The shop is in a mess this week following a move around of racks...but I have managed to get some turning done! Thankfully. See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list! Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com Something else of interest: Read my FREE newspaper at http://www.turnersrest.com The UK & Ireland Woodturning Symposium: http:

 

Woodturning with Tim Yoder-Acrylic & Wood Nightlights
By: woodturningwithtim1
June 29, 2016 · 65,763 views

Tim shows you how to take simple night light kits and make beautiful luminaires. One is from Zebra wood with a striking grain pattern, the other is from an unusual turning material, clear acrylic. The kits can be found online at Craft Supplies https://www.woodturnerscatalog.com/ They are around 2 and the part number is 1044830001 -

 

Display Stand - Episode 7
By: Paul Lockwood
June 26, 2016 · 149 views

This is my biggest project so far. Sticking with my current theme of using left over softwood from the workshop build I use shiplap boards for the table top, 2x2' for the stem and a piece of 4x2' for the base. Apologies for the length of the video, but there is over 8 minutes of having to put up with me talking. The top and stem were a real joy to turn, they came out far better than I had expected with little to no tear out. The Base I ended up turning again the following day as it was not true and left the whole item leaning over. All were given two coats of sanding sealer and two coats of woodwax 22. For the Woodchuckers Facebook group, please follow the link below. https://www.facebook.com/groups/harri.woodchuckers Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Care vecchie 5 lire Dear old 5 liras
By: Mauro il tornitore
June 24, 2016 · 2,023 views

A base of terebinth on the lathe in which insert an old italian 5 liras coin, useful in case also Italy would exit Europe... I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Una base di terebinto al tornio in cui inserire una vecchia moneta da 5 lire, che potrebbe tornare utile se anche l'Italia decidesse di uscire dall'Europa... Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro

 

#63 Turning Texturing and Colouring Sycamore Wall Hanging 'La Lune'
By: M. Saban Smith Woodturning
June 23, 2016 · 5,408 views

This week, I take a look at turning a wall hanging, similar to those done before. Sorry it's similar, but as I've been away for a little while getting busy with the UK & Ireland Woodturning Symposium, and I lost track of what I'd done. Next week will be different, I promise. Anyway, here is an 11' sycamore wall hanging textured and coloured with blue, black and purple spirit stains and then silver gilted. See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf wo

 

Woodspin - Coras 5B
By: Woodspin Peonzas
June 21, 2016 · 18 views

Un encargo muy especial para unos pequeños grandes amantes de las peonzas ! www.facebook.com/woodspines

 

First Turnings - Episode 4
By: Paul Lockwood
June 19, 2016 · 687 views

I finally now have electrics in the workshop. Showing the highlights of my first ever two turnings on a lathe using left over timber from the construction of the workshop. First I make s kitchen roll holder using shiplap boarding that I ripped down to size using a circular saw and then a bit of 47mmx47mm to turn the main spindle. Secondly I use another piece of 47mm to make small mushroom. I have no finishes suitable for wood turning and soft wood but did apply sanding sealer to both items and on the kitchen roll holder did apply Briwax original wax polish. This may work better with a hard wood but as it was a medium brown wax it holds the brown in certain places but does polish reasonable. Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

How To Make A Sand Pendulum
By: Carl Jacobson
June 17, 2016 · 21,323 views

This is a sand pendulum I made the base, and arm out of Myrtlewood. The base is 11' and it stands 23' Tall. I turned the base, and plumb bob on the lathe, and cut out the arm with the bandsaw. I found replacement sand on Amazon http://astore.amazon.com/thewood0c-20/detail/B009P8BACA I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https

 

Custom darts goncalo alves set 2
By: FireFly Goods
June 13, 2016 · 69 views

Set of 3 custom Goncalo Alves darts (20 gram finished). Set 2 of 2 going to Norway. This was my second time being able to turn all 3 darts at one time on the mandrel. I really like this new setup. It saves time and makes for a more consistent product. Get your own set made here: https://www.etsy.com/listing/226891370/hand-turned-darts-exotic-wood-custom

 

Custom darts goncalo alves set 1
By: FireFly Goods
June 13, 2016 · 63 views

Set of 3 custom Goncalo Alves darts (20 gram finished). Set 1 of 2 going to Norway. This was my first time being able to turn all 3 darts at one time on the mandrel. Before I would turn 2 then change out one blank for one of the finished darts to complete the 3rd. It was much more difficult to match them, but it helped hone my skills...:) Get your own set made here: https://www.etsy.com/listing/226891370/hand-turned-darts-exotic-wood-custom

 

Tokar Art - Woodturning 70 'Sun Disc & Cosmic Eye'
By: Dipa Das
June 11, 2016 · 68,675 views

The First time i tried to use the Router on a Lathe..

 

Trash Amp project, and stuff coming up.
By: The Woodshop
June 06, 2016 · 1,142 views

I really enjoyed the Trash Amp project. I have a club demo coming up in a few week for the Northwest Washington Woodturners. Trash Amps https://www.trashamps.com/ Our Daily Salt http://ourdailysalt.com/ AAW Symposium http://www.woodturner.org/ UKIWS http://www.ukiws.co.uk/ NWWW http://www.nwwwt.org/ David's Saturns Ring Bowl https://www.youtube.com/watch?v cPDSDe-cLfU I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedul

 

Tom Turns: Seed Pod Follow-Up and Viewer GIVE-AWAY!
By: Tom Stratton
June 03, 2016 · 1,051 views

Tom follows-up on last weeks Alien Seed Pod with a two piece version which makes it faster, cleaner and easier to create a stunning curved tail effect. I'm excited to bring a free give-away of a tin of Yorkshire Grit Abrasive Paste to one of my lucky subscribers, anywhere in the world! See the video and website for details. http://tomturns.com Mike Waldt's Yorkshire Grit Review: https://www.youtube.com/watch?v jPe6cBtsJjs Keith Barrow's Yorkshire Grit Review: https://www.youtube.com/watch?v gPtMLHDVEVw

 

woodturning Canarywood Wand
By: Landon Craig
June 03, 2016 · 984 views

Music: https://soundcloud.com/dj-direwolf-tm website: https://craigcarvings.com Etsy: https://www.etsy.com/shop/CraigCarvings?ref hdr_shop_menu

 

Woodspin - origen
By: Woodspin Peonzas
June 03, 2016 · 32 views

Resumen de la fabricación de una peonza modelo 'origen'

 

Woodpecker pecking, end over end
By: Derek Weidman
May 30, 2016 · 811 views

 

Tom Turns: Alien Seed Pod Prototypes - Woodturning
By: Tom Stratton
May 29, 2016 · 2,108 views

Tom creates a number of prototype sculptural pieces, 'Alien' Seed Pods with carved and shaped details on turned Sycamore. Details of the pieces, tools and techniques used can be found on the website at http://tomturns.com For your convenience, here are links to most of these tools etc on Amazon. Diamond Burrs http://geni.us/XzCBB Diamond Files http://geni.us/uZ6m Riffler Sets http://geni.us/UtuO6eh Art Masking Fluid http://geni.us/rtiB Dremel 4000 http://geni.us

 

woodturning осмоъгълна бъклица octagonal wooden vessel
By: Цветимир Иванов
May 29, 2016 · 1,140 views

 

Scary turning
By: Mark Dolan
May 29, 2016 · 137 views

 

Ballet Foot Stretcher
By: Peter Matthew
May 27, 2016 · 3,781 views

This week I made a foot stretcher. One tip from experience: use a soft wood. The curves are tight to cut on a bandsaw and the tool marks take forever to sand out. Thanks for watching! www.peterturnswood.com ----------------------------------------­­---------- To see my vlog and follow-up channel, go to my main channel by clicking 'Peter Matthew' up above. On my main channel, look to the right side of the screen where it says 'Featured Channels'. Under 'Featured Channels' is 'Peter Matthew 2'. Click that and subscribe to that channel :) ----------------------------------------­­­­­­­­­­­­­­

 

Übung: Aus Groß wird Klein eine Haarnadel entsteht.
By: GentleTurn
May 26, 2016 · 1,852 views

Der dicke und feuchte Kirschholzret aus dem Meißelübungsfilm sollte in eine etwas größere Haarnadel verwandelt werden. 'Designänderung' mit inbegriffen. Für mich gab's viele neue Handgriffe und Versuche, die auch in einem Bruch endeten. Ich übe weiter. Soziale Medien / Social Media YouTube: https://www.youtube.com/c/gentleturn Instagram https://www.instagram.com/gentleturn/ Facebook: https://www.facebook.com/GentleTurn/ Twitter: https://twitter.com/gentleturn?lang de drechseln #woodturning #lathe #woodworking #diy #art #design #haarnadel Über mich / About me

 

Fionda di Legno 2016 - Wooden Slingshot 2016
By: Andrea Zanini
May 17, 2016 · 1,630 views

Quest'anno ho avuto l'onore di realizzare il premio fionda di legno consegnato a Javier Zanetti. È stata un'esperienza fantastica che mi ha portato a conoscere persone speciali come i fieui di carruggi. This year I had the honour to craft the prize for the 2016 wooden slingshot given to Javier Zanetti. A wonderful experience that got me to know many terrific people. Viva Albenga, Viva i Fieui!

 

CHIKUAN 1
By: Zirbelholz Fred
May 17, 2016 · 3,268 views

Chienesische Kugel Anhänger Drei ineinanderliegende, durchbrochene Holzkugeln aus einem Stück gedrechselt. Meine Vorgehensweise bei der Herstellung. Die verwendeten Werzeuge wurden größtenteils selbst hergestellt oder bestehende modifiziert.

 

Bantar Collab and Back-to-Basics Woodturning
By: The Woodshop
May 16, 2016 · 1,826 views

3 string Banjo! I teamed up with Pat Laperriere. DIY guitars, and musical instruments have become very popular. I hope you enjoyed our version of this DIY banjo. The overall size of the banjo is 29' by 10 1/2'. If you try this project be sure to let me know! I would love to see some pictures. Check out Pat's channel Le PicBois https://www.youtube.com/channel/UCcM_SykaFqrxVnq52MjI6UA/featured Special thanks to Bill Livolsi from One Car Wookshop https://www.youtube.com/user/johnnyatropos I upload a new project video every Friday. Thank you for supporting free woodworking

 

Wood Turning an Avant-Garde Cellphone/Tablet Charging Stand
By: SP Wood Art
May 16, 2016 · 2,149 views

In order to fix the issue of cords falling off my nightstand, I've designed and wood turned a cellphone or tablet charging stand. The stand is made from Wenge wood and African Mahogany wood, and was designed to match my bedroom furniture with the ability for upgrades. I hope you enjoy this project. If you would like see more of SP Wood Art visit us at: www.spwoodart.com www.facebook.com/spwoodart www.plus.google.com/ SPWoodArt1/about www.pinterest.com/spwoodart/ I strive to create handmade, high quality wood pieces (and sometimes, crafts using other mediums such as natural stone or acrylic)

 

Woodturning A Compact Disc project that fights me all the way !!!
By: Templeboy Turnings
May 15, 2016 · 2,576 views

This week as promised I attempt another compact disc project, but things don't quite go according to plan !! I'm a patient man, but I must say this one tested me to the point of 'ACTUALLY SWEARING' Sorry Mum !! :-/ Title music Bullet from a gun, written and owned by Paul Mooney https://www.facebook.com/profile.php?id 100007379238948&fref ts All Other music used in this video was downloaded from the YouTube creates library. Thank you for watching, commenting, liking and sharing, Its very much appreciated. If you haven't subscribed already, please do to receive notifications of new video uploads to my channel. Until next time, please take care, Steve AKA The Templeboy Turner.

 

How to Build a Rug Hooking Frame
By: Peter Matthew
May 15, 2016 · 7,886 views

Plans: http://www.ebay.com/itm/252390086351?ssPageName STRK:MESELX:IT&_trksid p3984.m1558.l2649 www.peterturnswood.com -------------------------------------------------- Music by Brock Berrigan: http://www.brockberrigan.com ------------------------------------ To see my vlog and follow-up channel, go to my main channel by clicking 'Peter Matthew' up above. On my main channel, look to the right side of the screen where it says 'Featured Channels'. Under 'Featured Channels' is 'Peter Matthew 2'. Click that and subscribe to that channel :) ----------------------------------------­­­­­­­­­­­­­­­--------------------------­-­-­-­-­-­-­-­-­-­-­-­-­- Want to do a sticker swap? Send me an email: peterturnswood@gmail.com Want to send me stuff? Mailing address: Peter Matthew 6388 East Executive Drive Westland, MI 48185 Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080 Subscribe to my YouTube Channel! I post videos every Friday!

 

Turning a Pinapple into a Fruit Salad Bowl
By: PeteTGIF
May 15, 2016 · 466 views

Turning a pineapple into a bowl using regular wood-turning tools and machines. By using a pineapple it's the first food-safe bowl, actually you can eat it! Introducing my friend Manuela to the woodworking community. This time she made a delicious fruit-salad and had no bowl to serve it in. So I went into my shop and turned a desert-bowl real quick. Enjoy our journey to an eatable desert-bowl :-) Stay to the end for some bonus pictures and outtakes. -------------------------------------------------------------------------------- Please leave a comment to show your support. -------------------

 

Banjo/Bantar Collab With Pat Laperrière.
By: Carl Jacobson
May 13, 2016 · 22,431 views

3 string Banjo! I teamed up with Pat Laperriere. DIY guitars, and musical instruments have become very popular. I hope you enjoyed our version of this DIY banjo. The overall size of the banjo is 29' by 10 1/2'. If you try this project be sure to let me know! I would love to see some pictures. I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 Check out Pat's channel Le PicBois https://www.youtube.com/channel/UCcM_SykaFqrxVnq52MjI6UA/featured Special thanks to Bill Livolsi from One Car Wookshop https://www.youtube.com/user/johnnyatropos/featured

 

Segnalibro di legno - Wooden Bookmark
By: Mauro il tornitore
May 13, 2016 · 611 views

A wooden bookmark on the lathe. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Un segnalibro di legno al tornio. Spero vi piaccia il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro

 

Derek Weidman - Drawing on a Lathe
By: Rocky Mountain Woodturners
May 12, 2016 · 23,697 views

Derek Weidman demonstrates 'Drawing on a Lathe' to the Rocky Mountain Woodturners on May 5, 2016. weidmanwoodsculpture.com

 

#62 Woodturning Maple Wall Hanging with Molten Lead and Coke
By: M. Saban Smith Woodturning
May 10, 2016 · 5,785 views

This week, I get my arty and experimental head on and put into action a technique I've seen on YouTube before, but never in a turned wooden piece. I may be wrong, but I've never seen it. By pouring molten lead into the centre of the piece of maple and then dousing it with Coke, you can create some amazing formations as an odd chemical reaction takes place to twist and gnarl the lead as it quickly cools. The end result, I think, is a love it or hate it piece. Myself? I'm not sure... To hang it on the wall, I turned the piece with a recess, which will allow it to hang off a picture hook to an

 

A quick small hardwood handle for snuffer
By: woodturner21
May 10, 2016 · 2,134 views

Just a quickie of a small handle for candle snuffer. One of 150

 

How to Turn a Business Card Holder - woodturning
By: Mike Peace Woodturning
May 09, 2016 · 4,754 views

I demonstrate turning a unique business card holder on my wood lathe. I add a little texturing. This is a great little beginner woodturning project and makes a great gift. Thanks to John Lucas for the idea. Check out our full video catalog of woodturning tutorials at www.youtube/c/MikePeace356 Check out my blog http://mikepeacewoodturning.blogspot.com/ for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers YouTube channel.

 

Pocket Watch Follow-up
By: The Woodshop
May 09, 2016 · 2,250 views

Santas Little helpers https://www.facebook.com/Santas-Little-Helpers-1653637938251484/ https://www.reddit.com/r/SantasLittleHelpers/ Linn/Darbin Orvar http://www.darbinorvar.com/darbin-blog/2016/4/30/oregon-maker-meet-up-may-14th UKIWS http://www.ukiws.co.uk/ I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Ea

 

Woodturning - Clothespins
By: Marc 's Oneway of turning
May 09, 2016 · 1,559 views

A brief video of a simple project. Thanks for watching.

 

Poker Handle in Granadillo
By: Daniel Vilarino
May 07, 2016 · 1,324 views

Hola/Hi! Este video está en Inglés, si prefieres verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/Lk6m7ARzoi8 ***This video is in English.*** En este video realizo un mango de granadillo para un atizador. ***In this video I make a granadillo handle for a poker.*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this video and if that was the case, please make comments, give it a 'like' and subscribe to my channel.*** Si por algún motivo no les gustó, o

 

Small root ball and a lathe
By: Rich McNatt
May 06, 2016 · 108,683 views

I have had this root ball for a while now thought I would toss it on the lathe to see what I could make.

 

Pocket Watch
By: Carl Jacobson
May 06, 2016 · 23,472 views

Maple and Bocote Pocket Watch. The watch is 2 1/4' by 3' This is a pretty easy project that can be done in about an hour. If you make this project I'd like to see it. You can always share your project on my website too. I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@ya

 

Woodturning at 54a. #74 The Banksia Experiment
By: Keith Barrow
April 30, 2016 · 6,985 views

They say that you should try everything you can in life at least once,so here is my first,and probably only attempt at turning a Banksia Pod. It's not very good,but at least it might convince other turners to think twice before having a try!!

 

Basket Illusion #2
By: Gord Rock
April 30, 2016 · 5,660 views

2nd woven basket illusion. This time, a bowl. Link to 1st basket illusion: https://youtu.be/RGx856ebo84 Large lathe indexing system: http://alisam.com/large-indexing-systems.html Other indexing systems are available on their website: http://alisam.com/index.html Lathe-driven turntable: https://youtu.be/EgIaeyQDTi4

 

#56 Woodturning Footed Torus Hollow Form
By: Yuval Lahav Woodturning
April 24, 2016 · 309,783 views

Everyone has their white whale. This was mine. When I was a year into turning, I tried for a torus bowl, 4 times, never succeeding. Three years later, It was about time I gave it another go. Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Katy Kirby - Every Time Kelly Latimore - Leaving Rooms David Mumford - Bonfire Music Josh Woodward - Honcho Graham From Birmingham Swear and Shake - Suddenly MC Cullah - Please Bring Me Shelter All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

#2 Quick and Easy 1 hour project - from trash to needed
By: PolishWoodturner
April 24, 2016 · 305 views

We had old espresso cup holder which we had never used. I decided to turn it into paper towels stand. I could just sand it and put a laquer again - but turning it again was more entertaining... ;)

 

Landscape Scene Coat Rack
By: Carl Jacobson
April 22, 2016 · 8,725 views

I used Maple, and Walnut to make this landscape scene coat rack. It's 39' x 13' I cut all the pieces out on the bandsaw, and turned the knobs on the lathe. If you make this project I'd really like to see it, you can always share your projects on my website. I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and on

 

Foot Massager Roller - Beginners Woodturning Project
By: M. Saban Smith Woodturning
April 20, 2016 · 4,758 views

See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list! Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com Something else of interest: Read my FREE newspaper at http://www.turnersrest.com The UK & Ireland Woodturning Symposium: http://www.ukiws.co.uk Useful Amazon links to related products used in this project. These links will take you to pages appropriate

 

Drechseln / Woodturning: frische Kirschholzspäne / Cherrywood shavings
By: GentleTurn
April 20, 2016 · 539 views

Bei den Dreharbeiten zum 180-Grad-Futtertest habe ich einen sehr frischen Kirschholzast rund gedrechselt. Als Anfänger sind solche Spanflüge sehr schön. Schade, dass der frische Duft nicht herüberkommt. Noch eines: Jetzt weiss ich, warum die Drechsler in den Filmen immer gut geschlossene Jacken tragen. :-) Soziale Medien / Social Media YouTube: https://www.youtube.com/c/gentleturn Instagram https://www.instagram.com/gentleturn/ Facebook: https://www.facebook.com/GentleTurn/ Twitter: https://twitter.com/gentleturn?lang de drechseln #woodturning #lathe #woodworking #diy #a

 

Custom Tap Handles
By: Kyle Toth
April 11, 2016 · 14,315 views

I make these tap handles for Refuge Brewery. For inquiries contact woodbytoth@gmail.com To keep up with my work throughout the week check out the links below. Thanks for watching! Love Tōth Also if you want to know why I love what I do check out my artist profile video done by Vigil Films. Its part of there Ardent Collection.... http://youtu.be/JjUzuECZN-0 http://www.woodbytoth.com https://m.facebook.com/woodbytoth https://mobile.twitter.com/woodbytoth http://instagram.com/tothtoth Support: https://www.patreon.com/woodbytoth Store: http://woodbytoth.bigcartel.com

 

Toczenie, koraliki na dredy, czerwony buk jesion
By: DrewnianySzejk
April 08, 2016 · 223 views

https://www.facebook.com/drewniany.szejk

 

razor set #2
By: Strickcraft
April 08, 2016 · 19 views

one of these days i will get a bigger sd card... the beginning was cut out of this set first is doing the stand then finishing it. then the razor for strickcraft shaving set #2. it is currently on my etsy pictures are both there and in the facebook group https://www.facebook.com/groups/Strickcraft/?ref bookmarks https://www.etsy.com/listing/289027053/strickcraft-de-razor-brush-stand-set-2?ref shop_home_listings

 

Ξυλότορνος - Κατασκευή μολυβοθήκης απο ξύλο ελιας !! Making of a pencil holder #2 time lapse
By: Kostas Annikas Deftereos
April 05, 2016 · 790 views

This is a video about how to turn an olive wood pencil holder !! My lathe will be out of work for couple of weeks so i will upload some older video that i never upload !! i have break the pulleys and i can find this type of pulleys in Greece so I look for a new lathe also the pulleys !! MY LINKS Facebook www.facebook.com/annikas8 https://www.facebook.com/annikasgreek... Google https://plus.google.com/1065720657902... Instagram https://www.instagram.com/kostas_anni... #kostas_annikas Tumblr https://www.tumblr.com/blog/annikas88 Pinterest gr.pinterest.com/annikas8/ Linkedin gr.linkedin.com/in/kostas-annikas-defter­­­­­eos-0a8a87b0 Viber 306938762384

 

Make a wooden star
By: Rebel Turner
April 04, 2016 · 7,198 views

I make a wooden star out od Ipe and poplar usable in the base of a bowl

 

Smooooooth Jazzzzzz Follow-up
By: The Woodshop
April 04, 2016 · 2,457 views

Rainstick Follow-up John Heisz-Sharpening Video https://www.youtube.com/watch?v EGqQyVoR5RQ Brian Unruh https://www.youtube.com/channel/UCHAdzp6H1XKuV2FG7mIwMWg/feed David's Channel https://www.youtube.com/channel/UCpFp4Xo5-h0Zx0DG1-x6f8A I upload a new project video every Friday on my main channel. https://www.youtube.com/user/haydenHD/featured Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robu

 

Wood Turning Challenge Tree 2016 Short Version
By: Turning Round
April 01, 2016 · 1,468 views

In this video I take a tree from my yard and turn it into drink coasters, Candle Holders, and the most amazing cast in resin lidded box a wood turner could turn if a wood turner could turn resin.

 

Handmade Rainstick
By: Carl Jacobson
April 01, 2016 · 17,250 views

A rainstick is a long, hollow tube partially filled with small pebbles or beans that has small pins arranged helically. I made this Rain stick out of Cherry, and Walnut. The overall size is 28' x 3' I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 Daniel Vilarino https://www.youtube.com/user/DanielVilarino I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and

 

Wooden Monarch Butterfly - Farfalla monarca di legno
By: Mauro il tornitore
April 01, 2016 · 4,470 views

How to make a wooden Monarch butterfly. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Come realizzare una farfalla monarca di legno. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro

 

Pacman & Inky part 1 (Inky)
By: Jake Webb
March 27, 2016 · 159 views

A long while in the planning, part 1 of the Pacman project. My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

3 Nail Cross
By: Tommy Akridge Designs
March 26, 2016 · 3,363 views

My name is Tommy Akridge, I am a small town wood turner working on wooden bowls, segmented bowls and vases. some of my work could be considered art and also consist of Urns, vases and boxes. I have been turning for just a few years and I have found that I love it. I get lost in my work and that helps me cope with my the day to day work life. Showing my work on YOUTUBE has changed the way I turn, I enjoy showing others what i'm doing and maybe them be better turners. Thank You For Watching Tommy

 

Cherry pocket watch stand hand woodturned in real time
By: woodturner21
March 23, 2016 · 23,809 views

This Cherry Watch stand holds 3 pocket watches and is filmed in real time with only the sanding operations being edited.

 

#65 Big Spider Sculpture
By: DIY with Uncle Cy
March 23, 2016 · 8,016 views

SO to compliment the Dragonfly Sculpture I have created a Spider Sculpture. My customer requested it (actually his wife requested it) after seeing a similar (though much larger) sculpture while on holiday in Scotland (I think). Mine is 5 feet long and 4.5 feet wide on a 9 foot diameter web. All 32 segments of the legs were turned on the lathe the body was chainsaw carved and the web was made from 33 feet of rebar and 100 feet of #9 wire.

 

Turning A Unique Gift
By: Gord Rock
March 18, 2016 · 2,397 views

Not the BEST gift you could give someone but a simple turning project you might enjoy making for yourself.

 

Happy St Patrick's Day Leprechaun
By: Carl Jacobson
March 17, 2016 · 6,786 views

I turned this Leprechaun for a friend in Ireland. I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.com/ Wood Turners Wonders http://woodturnerswonders.com/ Peppermill kits

 

Woodturning - to infinity and beyond -
By: Marc 's Oneway of turning
March 15, 2016 · 1,226 views

The saturn box with texturing and paint experiment. Thanks for watching.

 

Random: Wood Turning a Bike Frame Shim for the forks.
By: Turning Round
March 11, 2016 · 828 views

Yup, That is what I said this video is about. Using my tools and a little thinking to turn a Bike Frame Shim for the forks of a racing BMX bike. I have to get this done and bike shops didn't seem to want to have the parts so I made them.

 

Woodturning after being away from the lathe and some lessons learned
By: Jerry Paul
March 08, 2016 · 2,766 views

This one didn't work out quite as planned. I was a bit over ambitious going back to the lathe when I decided to finish turning the american elm bowl with my new bowl gouge. In hindsight, I should have turned a couple of warm-up pieces first. No harm done. Well, other than to my pride, and the bowl. I'll have to turn it around, make a new mortise in the base and turn it again. But first, I'm going to do a few warm up pieces. LOL

 

Episode 11: Cigar Holder
By: As The Wood Turns
March 02, 2016 · 1,509 views

I made a little number for a buddy of mine who said he needed something to hold 'lightly smoked' Black and Mild's. I botched it a little on the cap but I think I got the point across. In true 'As The Wood Turns' fashion things flew off the lathe and at the camera at dangerously high speeds. You know, for fun. Please subscribe and tell your friends. Every little bit helps.

 

Unique video for Youtube Upcycling a Lignum Vitae Crown green Bowling bowl
By: Peter Mitchell
February 27, 2016 · 4,990 views

Upcycling a Lignum Vitae Crown green Bowling bowl. I think this is the only video on You Tube of someone trying to turn a Crown green Bowl into something different. I don’t think I will be trying it again it is the hardest wood ever my tools wood hardly touch it even the carbide tipped tool had trouble. I was a 2 hour video I had so much trouble turning it I had to cut a lot of it out I hope you enjoy it. Thank you Pete My Video's https://www.youtube.com/channel/UCxRWDm68PUl8XaUCFgp5kcw/videos?shelf_id 0&sort dd&view 0

 

Strumento a percussione - Percussion Musical Instrument
By: Mauro il tornitore
February 26, 2016 · 1,859 views

I used boxwood to make on the lathe this percussion musical instrument. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Ho usato del bosso per costruire al tornio questo strumento musicale a percussione. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro

 

woodspin - modelo plate
By: Woodspin Peonzas
February 23, 2016 · 23 views

woodspin - Resumen del torneado de una peonza modelo plate

 

Como hacer una botella de madera parte 4 de 4 - Arte en Torno
By: Arte en Torno
February 19, 2016 · 13,657 views

Cesar explica paso a paso, como tornear una botella en madera en dos cuerpos: tapa y contenedor, la cual puede ser utilizada como elemento decorativo o utilitario, utilizando maderas de reciclaje.

 

Como hacer una botella de madera parte 3 de 4 - Arte en Torno
By: Arte en Torno
February 19, 2016 · 4,523 views

Cesar explica paso a paso, como tornear una botella en madera en dos cuerpos: tapa y contenedor, la cual puede ser utilizada como elemento decorativo o utilitario, utilizando maderas de reciclaje.

 

Como hacer una botella de madera parte 2 de 4 - Arte en Torno
By: Arte en Torno
February 18, 2016 · 4,176 views

Cesar explica paso a paso, como tornear una botella en madera en dos cuerpos: tapa y contenedor, la cual puede ser utilizada como elemento decorativo o utilitario, utilizando maderas de reciclaje.

 

Como hacer una botella de madera parte 1 de 4 - Arte en Torno
By: Arte en Torno
February 17, 2016 · 6,004 views

Cesar explica paso a paso, como tornear una botella en madera en dos cuerpos: tapa y contenedor, la cual puede ser utilizada como elemento decorativo o utilitario, utilizando maderas de reciclaje.

 

Woodturning Hodgepodge
By: Adze Woodturning
February 13, 2016 · 3,263 views

This video is comprised of multiple turning moments and it's a little choppy. Hopefully you will get something out of it! Thanks for watching.

 

woskowanie plugów, orzech amerykański
By: DrewnianySzejk
February 13, 2016 · 206 views

Opis

 

MAKING A DRAWER PULL by Reed Gray aka Robo Hippy
By: robohippy
February 09, 2016 · 5,219 views

Reed walks us through one of his earliest turning projects.

 

Cosmic clouds
By: Gary Lowe Woodturner
February 05, 2016 · 32,583 views

Description

 

Wood Turning #125 Texted Load'n Lock
By: The Tiny Trailer Workshop
January 27, 2016 · 658 views

Another thing that you don’t come across every day so it was nice to have the tools to make some! The turning is not at all difficult but getting them lined up properly to drill is another matter! I show the making of one... but in reality I made 11! Out of which I was able to come up with 4 that worked... and matched ... more or less! The trial and error method works very well... but you wasted a lot of wood that way too! Well a lot as far as sticks 1 ” long and a “thick are concerned! Something else I ran into with this was places where the flooring that I was using had been nailed down..

 

Wood Turning #125 Load'n Lock
By: The Tiny Trailer Workshop
January 27, 2016 · 1,071 views

Another thing that you don’t come across every day so it was nice to have the tools to make some! The turning is not at all difficult but getting them lined up properly to drill is another matter! I show the making of one... but in reality I made 11! Out of which I was able to come up with 4 that worked... and matched ... more or less! The trial and error method works very well... but you wasted a lot of wood that way too! Well a lot as far as sticks 1 ” long and a “thick are concerned! Something else I ran into with this was places where the flooring that I was using had been nailed down..

 

Woodturning at 54a #59 The Ash Collection #5. 3 quick pieces
By: Keith Barrow
January 22, 2016 · 1,824 views

3 little pieces to finish off this collection.

 

Como hacer un pomo o compactador de café part 2 de 2-Arte en Torno
By: Arte en Torno
January 20, 2016 · 7,051 views

Cesar explica como construir un pomo el cual lleva tuecas ensambladas, para ser atornillado en un eje metálico puede usarse en diversos elementos, en este caso va a ser utilizado como compactador de café o Wood tampers.

 

Como hacer un pomo o compactador de café part 1 de 2-Arte en Torno
By: Arte en Torno
January 20, 2016 · 3,808 views

Cesar explica como construir un pomo el cual lleva tuecas ensambladas, para ser atornillado en un eje metálico puede usarse en diversos elementos, en este caso va a ser utilizado como compactador de café o Wood tampers.

 

Toczenie plugów / Woodturning plugs
By: DrewnianySzejk
January 16, 2016 · 1,267 views

https://www.facebook.com/drewniany.szejk

 

Späne machen
By: Martin Preller
January 16, 2016 · 1,142 views

über YouTube Capture

 

Attempts 1: Wet Black Walnut
By: As The Wood Turns
January 16, 2016 · 132 views

In my first attempt video, which is a nice way of saying, 'Wah! I can't do it!', I try to make something out of a nice piece of black walnut. Spoiler alert; it does not go well. Do I give up? You'll have to watch to find out. Hope you like this video. Please like and subscribe.

 

Kansas City Chiefs Trophy
By: Carl Jacobson
January 15, 2016 · 9,610 views

Kansas City Chiefs Trophy! Now there are four words you're not going to hear very often. I turned this trophy obviously because I lost a bet....lol Sorry Brian! I used Walnut Maple, and Myrtlewood. Brian Unruh https://www.youtube.com/channel/UCHAdzp6H1XKuV2FG7mIwMWg If you try this project be sure to let me know! I would love to see some pictures. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/sho

 

#160 Watter bottle, maple and leather part2
By: Miguel Sanchez
January 13, 2016 · 5,291 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#160 Cantimplora en arce y cuero parte2
By: Miguel Sanchez
January 13, 2016 · 9,865 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#159 Watter Bottle, maple and leather part1
By: Miguel Sanchez
January 11, 2016 · 8,063 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#159 Cantimplora en arce y cuero parte1
By: Miguel Sanchez
January 11, 2016 · 17,904 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Naked Turner Turns Wooden Flute and Plays It
By: Erik Anderson
January 10, 2016 · 23,072 views

I turn a wooden flute from a piece of walnut firewood

 

Turning a Spatula for the Kitchen: Woodturning by Sam Angelo
By: WYOMINGWOODTURNER
January 04, 2016 · 10,085 views

Sam turns a kitchen Spatula out of Big Leaf Maple.

 

Woodturning, Processing Compact discs (Cd's) ready for turning.
By: Templeboy Turnings
January 04, 2016 · 6,372 views

Episode 2 of my Compact disc turning series, in this episode I explain and demonstrate what I have learned about processing and gluing compact discs together ready for turning on the lathe. Title and credit music by :- http://www.bensound.com/royalty-free-music All other music from the YouTube create library. Thank you for watching, episode 3 will follow shortly woodturning a beech and compact disc goblet. Please like and share my videos, and if you haven't already, please subscribe.. Until next time, bye bye..... Steve.

 

Door Harp
By: Carl Jacobson
December 28, 2015 · 38,640 views

I made this landscape scene door harp using Myrtle wood, Walnut, and Maple. I cut out the body, and scene on the bandsaw. I used the lathe to recess in the scene. The overall size is 15' by 10' If you try this project be sure to let me know! I would love to see some pictures. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.pat

 

Custom Bocote dart set -teardrop style
By: FireFly Goods
December 27, 2015 · 19 views

Here is a VERY nice set of custom darts I turned for a customer this weekend. They requested a teardrop shpe/style and 18g when complete. The third dart is ALWAYS tough...but when it comes to matching a teardrop shape it is EXTREMELY tough...:)

 

#252 finishing touches
By: Cap'n Eddie Castelin
December 26, 2015 · 13,142 views

Responses to phone calls I receive weekly

 

#44 Commissioned Emerging Wine Bottle
By: Yuval Lahav Woodturning
December 26, 2015 · 34,075 views

While doing my town's Christmas fair last week, a man brought in an Olive branch he cut in his yard and commissioned me to make him something beautiful, I hope I hit the spot. Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Josh Woodward - Swimming in Turpentine Kelly Latimore - Mt Princeton David Mumford - The Right Train / Meet Me Tomorrow All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Last minute Weihnachtsgeschenk Kerzenständer
By: Tiroler Drechsler
December 23, 2015 · 9,577 views

Für alle die in der letzten Sekunde noch ein Geschenk brauchen. Ein sehr schnelles Projekt das einiges hermacht wenn es unterm Baum liegt. Darüber hinaus möchte ich mich nochmal an alle meine Abonnenten bedanken denn ohne euch würde hier nichts laufen. _____________________________________________ Musik: Jingle Bells 7 von Kevin MacLeod Dance of the Sugar Plum Fairy von Kevin MacLeod _____________________________________________ Have fun! \( _ )

 

Woodturning - spalted beech inlay video
By: George Watkins
December 18, 2015 · 3,950 views

In this video I show how I prepare a book matched spalted beech inlay. follow me on: Instagram - https://www.instagram.com/from_the_tree/ Facebook - https://www.facebook.com/FromTheTreecouk-318583068237091/ Twitter - https://twitter.com/GeorgeWatkins2 my website:http://www.fromthetree.co.uk

 

Holiday Card Holder
By: Cip's Wood Chips
December 17, 2015 · 1,019 views

Here is a simple holiday card holder. A piece of Poplar and some simple tools is all you need. Don't forget the 2016 United Kingdom and Irish Woodturners Symposium, June 18th and 19th 2016.

 

Hand Turned Darts - Bocote - Slim body
By: FireFly Goods
December 16, 2015 · 11 views

Hand turned darts made of Bocote in a slim body style. Darts and dart accessories available via FireFlyGoods.etsy.com Want your own set just like this? Check them out here: https://www.etsy.com/shop/FireFlyGoods?section_id 15900276

 

President's Challenge, Dec. 2015
By: Brian Havens
December 15, 2015 · 3,387 views

Although I could have played it safe by doing one of the kinds of holiday ornaments I have done many times before, for the final President's Challenge in 2015 I sought out something new and challenging by turning a multi-axis snowman ornament with a tilted hat. The most challenging part was figuring out how to make this ornament without the use of an expensive, specialty chuck. The idea for the approach I came up with is derived from a combination of the collet insert from last month's President's Challenge, and they way I do multi-axis goblets. Contrary to what I expected, the more I explore multi-axis turing, the more I find that I do NOT rely on specialty chucks, instead relying on the creative use of standard turning accessories and a little augmentation with simple jigs. I find this discovery exciting because I suspect many turners never give multi-axis turning a try because of the assumed initial cost of buying special accessories.

 

Making a Wooden Hinge, practice run
By: R Humphrey
December 14, 2015 · 23,984 views

Just practicing here, this one is rough. I'm incorporating this style hinge into a project I'm working on, and needed a test run prior to using the good wood. That video will be coming soon... United We Groove by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Woodturning A Broom??
By: Custom Chris
December 12, 2015 · 2,208 views

https://www.youtube.com/red For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Toczenie tuneli do uszu / turning ear plugs with lathe
By: DrewnianySzejk
December 09, 2015 · 6,846 views

fb : https://www.facebook.com/drewniany.szejk/ inst : drewniany.szejk

 

Toczenie koralików na dredy. DREWNIANY SZEJK
By: DrewnianySzejk
December 07, 2015 · 1,331 views

fb : https://www.facebook.com/drewniany.szejk/ inst : drewniany.szejk

 

Toczenie plugów DREWNIANY SZEJK
By: DrewnianySzejk
December 02, 2015 · 2,636 views

fb : https://www.facebook.com/drewniany.szejk/ inst : drewniany.szejk

 

Naked Turner Hairy Oak From Les From Australia
By: Erik Anderson
November 29, 2015 · 2,550 views

I turn a Piece of Hairy Oak From a viewer from Australia named Les! Thanks Les!!!

 

Toczenie Plugów 20 mm
By: DrewnianySzejk
November 27, 2015 · 1,343 views

fb : https://www.facebook.com/drewniany.szejk/ inst : drewniany.szejk

 

President's Challenge, November 2015
By: Brian Havens
November 20, 2015 · 7,157 views

This month's President's Challenge has given me an excuse to get back to a project that has been sitting on the shelf for several months. Although scoops and spoons can be fun and useful to make, the idea in this project is to make a scoop that has the accurate volume of a measuring spoon to make it even more useful in the kitchen. With Thanksgiving just around the corner, perhaps this is even an apropo gift and token of appreciation for the chef tasked with preparing your Thanksgiving Dinner. Although I have only made an (American) tablespoon so far, I have calculated some other sizes: T

 

Tokar Art 55 Woodturning Violet Wave
By: Dipa Das
November 20, 2015 · 3,300 views

 

Rainbow with a twist
By: David K
November 20, 2015 · 524 views

I tried something i haven't seen before. The idea was to twist every 'segment' after coloring. Sit back and enjoy! https://www.facebook.com/davidkoessler ______________________________________________________ Music used in this Video: Gymnopedie No 2 von Kevin MacLeod ist unter der Lizenz Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) lizenziert. Quelle: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100786 Interpret: http://incompetech.com/ Call to Adventure - Comedy von Kevin MacLeod ist unter der Lizenz Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) lizenziert. Quelle: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1300022 Interpret: http://incompetech.com/ Grass by Silent Partner

 

Perfume Holders for Belà n and Camila
By: Daniel Vilarino
November 19, 2015 · 594 views

Hola/Hi! Este video está en Español, si prefieres verlo en Inglés, por favor haz un click aquí: https://youtu.be/u-dc_cXSN-U ***This video is in English*** En este video preparo cinco atomizadores de perfume o porta perfumeros. ***In this video I make five perfume atomizers or perfume holders.*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this video and if that was the case, please make comments, give it a 'like' and subscribe to my channel.*** Si por algún motivo no les gustó, o

 

Porta Perfumes para Belà n y Camila
By: Daniel Vilarino
November 19, 2015 · 2,296 views

Hola/Hi! ***This video is in Spanish, if you prefer to watch it in English, please click here: https://youtu.be/OjHs75RuPLc*** Este video está en Español En este video preparo cinco atomizadores de perfume o porta perfumeros. ***In this video I make five perfume atomizers or perfume holders.*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this video and if that was the case, please make comments, give it a 'like' and subscribe to my channel.*** Si por algún motivo no les gustó, o h

 

Woodturning a Maraca
By: Peter Mitchell
November 16, 2015 · 1,665 views

Hi everyone I turned this Maraca for my lathe club competition we had to make something that made a noise, I don’t think I have any chance of winning as all the other people that enter are veteran turners. But there is no harm in trying we all have to start somewhere. I am sorry about the video I forgot to move the camera position when turning the handle. I had to cut the video down from 1 hour and a half to 40 minutes hence the speeded up parts. I hope you enjoy this video please subscribe and give me a thumbs up. All comments and advice are welcome https://www.youtube.com/channel/UCxRWDm68PUl8XaUCFgp5kcw/videos

 

#49 Gift Idea #2 Switchable Drop Spindle
By: DIY with Uncle Cy
November 15, 2015 · 6,398 views

Part 2 of 4 gift ideas. OK so in my family there are a lot of fiber artist (Crocheters, knitters, spinners, ect). So admittedly these gift ideas are for fiber artist types. However they are alos very fun to make and sell well at craft shows. This Drop spindle can be used as a top or bottom whorl spindle different spinners have different preferences and this spindle covers 2 of the options.

 

Christmas Gifts #2 Muddler and Spurtle
By: H F Bowern Designs - Harold Bowern
November 12, 2015 · 1,587 views

Welcome back. Today I am continuing on with my Christmas gift videos and I will be making a Muddler and Spurtle. The muddler is made out of Cherry and the spurtle is made from Cherry and Maple. I finish the muddler with Claphams Salad Bowl finish and finish the spurtles with The Doctor's Workshop Microcrystal Wax Bowl finish Definitions of each tool is listed below: A muddler is a bartender's tool, used like a pestle to mash—or muddle—fruits, herbs, and/or spices in the bottom of a glass to release their flavor. Cocktails that require the use of a muddler include: Mojito made with light r

 

Woodturning
By: Boston Woodturning
November 11, 2015 · 83 views

I put this log on the large to turn a large piece but found a huge hole 1' wide 4' long. Instead I made a few small items.

 

Lathe art
By: Loquito tattoo
November 09, 2015 · 27 views

 

Tokar Art 53 WoodTurning Art of Mother Nature
By: Dipa Das
November 08, 2015 · 14,414 views

How this Project starting 6 months ago you can watch in video Tokar Art 29.. Now i just finish this Bowls.. Finish is just with Tung oil, because Grain of wood is very nice.. Really Art of Nature..

 

Tokar Art 52 Exhibition Stand
By: Dipa Das
November 02, 2015 · 3,055 views

One friend invite us for Festival where Creative people present own hand work.. OK, but we need some stand for our Woodturning Art..

 

Wooden spiral for the Challenge
By: Mauro il tornitore
October 31, 2015 · 125,441 views

This is my entry for the 2015 Christmas Ornament Woodturning Inspired by Richard Madden’s article, I made this spiral from a log of boxwood. For more information on this challenge visit https://youtu.be/F0ssrYgQriE https://youtu.be/KnPEz-X-T34 Enter Your Ornament at www.AsWoodTurns.com/Challenges I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro

 

Woodturning Halloween Special, Turning and carving a skull mug Video #8.
By: Templeboy Turnings
October 30, 2015 · 1,831 views

In this weeks video I did a little something different and carved a skull into a turned mug.... The mug is made from a piece of spalted ash, with a beech handle. I also fitted a glass insert. video music by :- 'Exciting Trailer', 'Mechanolith', 'Volatile Reaction' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/ Martin Saban Smith https://youtu.be/lL-VEfB0gxY UK & Ireland Woodturning Symposium web address http://www.ukiws.co.uk/ UK & Ireland woodturning Symposium Facebook https://www.facebook.com/ukiws/?ref ts&fref ts My facebook page :- https://www.facebook.com/profile.php?id 100004634207607&ref ts&fref ts Sam Angelo 'Wyoming woodturner' https://youtu.be/-r0v-ctAdDY Thank you for watching, please like, share and subscribe.

 

#46 Jack O Lantern follow up
By: DIY with Uncle Cy
October 27, 2015 · 363 views

So here we go, following up on the Jack-O-Lantern. Even gonna light it up for ya. I will be finishing it with polyurethane later, forgot to mention that in the video.

 

#46 How to blow up a Jack O Lantern
By: DIY with Uncle Cy
October 26, 2015 · 871 views

Happy Halloween. So I thought I would make a Jack-O-Lantern, but first I had to make the Pumpkin since I didn't plant any this year. Unfortunately it was plagued with mishaps and doomed in the end. Still turned out a pretty fun and cool project. Enjoy.

 

Tokar Art 51 Lathe Lover
By: Dipa Das
October 25, 2015 · 2,075 views

I am a Lathe Lover.. :-) This video is from Photos of my Woodturning Work in last (and my First!) 7 months.. Thanks for Support..

 

Commemorative Poppy Display
By: Peter Woodbine
October 25, 2015 · 773 views

Woodturning,Pewter Casting,Superglue finishing, for Poppy Display Base.

 

DIY Tambourine
By: Carl Jacobson
October 23, 2015 · 24,978 views

This was a fun project! I used Myrtle wood, and walnut to make this tambourine. I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.com/ ChefwareKits https://www.chefwarekits.com/?tracking carl Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.fac

 

Funnel on the lathe
By: Mauro il tornitore
October 23, 2015 · 2,063 views

A chestnut funnel on the lathe. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Un imbuto di castagno al tornio. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro

 

Coke Can Celtic Knot Version 2
By: RJBWoodTurner
October 20, 2015 · 17,267 views

I really liked the Soda Can Celtic Knot Pen that I made a while back. The only thing I didn't Like about it was I thought it was to busy. I wanted to have another go at the blank but I wanted to simplify it. I also didn't want two separate pieces that are a pain to align for gluing. Glue, even C/A, acts as a lubricant and the pieces move around and always seem to stick at the most inopportune time. Here's what I came up with. I really like the simplicity of the design and the fact that I never sever the wood into two pieces. Regards, Bob

 

President's Challenge, Oct. 2015
By: Brian Havens
October 16, 2015 · 8,114 views

This was by far the most difficult topic for which to come up with a President's Challenge video: 'Purely Sculptural', specifically something that has 'no real or perceived use.' I finally managed to come up with something by borrowing a method from a turner named David Reed Smith and applying it to a form of therming. Along the way, I could not help but discover some practical uses for the techniques as well. Be sure to also visit David Reed Smith's web site. He has a wealth of information and many published articles covering a wide variety of techniques. http://www.davidreedsmith.com If you also work with flat wood, be sure to visit Todd Clippinger: http://americancraftsmanworkshop.com . Todd has extensive, real-life experience with remodeling and woodworking. He is a master at using fine woodworking to take remodeling to a whole new level.

 

Walnut Hourglass
By: Carl Jacobson
October 16, 2015 · 13,843 views

This is a great beginner woodturning project, and it makes a great gift. I turned all the pieces on the lathe. http://www.personalizationmall.com/ I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.com/ ChefwareKits https://www.chefwarekits.com/?tracking carl Website http://www.thewoodshop.tv/ Google https://plus.google.com/1131999

 

Turning a Banksia Pod with A Bit Of A Disaster
By: Peter Mitchell
October 16, 2015 · 1,159 views

I tried to turn a small vase from a Banksia Pod every thing went wrong. I kept knocking the phone mount with my visor. Then the neck of the vase chipped out then another piece chipped of so It Turned Into A Candle Stick Holder. My phone battery died so i didn’t get to show the final finishing https://www.youtube.com/channel/UCxRWDm68PUl8XaUCFgp5kcw/videos

 

Arte en torno. Copa.... en eucalyptus colorado
By: JOSE ALBERTO GIORDANO
October 14, 2015 · 8,916 views

Creado por : Jose Alberto Giordano Necochea Argentina.

 

Como hacer media esfera mediante un dispositivo - Arte en Torno
By: Arte en Torno
October 12, 2015 · 7,358 views

Cesar explica como hacer medias esferas en serie, mediante la utilización de un dispositivo.

 

Long Version Armillary
By: The Woodshop
October 11, 2015 · 2,415 views

This is the long version of the Armillary I turned last week. I used Maple and Walnut for this project. I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.com/ ChefwareKits https://www.chefwarekits.com/?trackin... Website http://www.thewoodshop.tv/ Google https://plus.google.com/1131999045658... Facebook https://www.facebook.com/pages

 

Turned Armillary
By: Carl Jacobson
October 09, 2015 · 12,017 views

I turned this armillary on the lathe. I used Maple and Walnut to create this DIY armillary. TOOLS I USED IN THIS VIDEO: Lathe: http://www.turnrobust.com/ Turning tools: http://www.easywoodtools.com/ Turning tools: http://thompsonlathetools.com/ Howard wax: http://amzn.to/2ytKvKC Sandpaper: http://woodturnerswonders.com/ Face shield: http://amzn.to/2f5Exaw I upload a new project video every Friday, and I'm live Monday on YT and Friday on Twitch. Check out my Twitch channel. https://www.twitch.tv/carljacobson I DO THIS FOR A LIVING, THANK YOU

 

How to turn a Rosette (Roundel)
By: woodturner21
October 08, 2015 · 4,851 views

Woodturning a Fireplace roundel for painting made from poplar

 

Como hacer un recipiente en madera - Arte en Torno
By: Arte en Torno
October 04, 2015 · 13,339 views

Cesar explica de manera detallada con un ejercicio aplicativo de como hacer un recipiente en madera, que puede cumplir un sinnúmero de funciones.

 

Making a watch parts D/E razor
By: Aaron Meredith
October 04, 2015 · 748 views

The process I use to make a watch parts double edge razor on a lathe.

 

Stir the Pot like a Scot
By: Mike Peace Woodturning
October 02, 2015 · 5,520 views

I demonstrate turning a spurtle on a wood lathe. This is a very basic spindle turning project that is also useful! A spurtle is a traditional Scottish kitchen tool for stirring porridge or oatmeal but is equally useful for stirring thick sauces, soups or stews.. Check out my blog for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers channel. MikePeaceWoodturning.blogspot.com

 

Hold that Door! Turn a Door Stop
By: Mike Peace Woodturning
September 27, 2015 · 4,998 views

I demonstrate woodturning a couple of fancy, decorative door stops. This is a simple beginner spindle project for turning on a lathe. Check out my blog for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers channel. MikePeaceWoodturning.blogspot.com

 

#42 Branch Koozie
By: DIY with Uncle Cy
September 27, 2015 · 10,812 views

Call it a Branch Koozie, A piece of wood to hold your cold can. Just a quick project to test out my new Berger hollowing tool.

 

Naked Turner Walnut Shakeree
By: Erik Anderson
September 26, 2015 · 1,729 views

Quick Video of a Small Shakeree

 

Tokar Art 50 WoodTurning Purification..
By: Dipa Das
September 24, 2015 · 5,716 views

How to Turn Washbasin? Ash wood like Symbol of Sun.. Walnut like symbol of Earth - Roots..

 

Makin Shavins 247
By: Cap'n Eddie Castelin
September 19, 2015 · 8,131 views

This video is about Makin Shavins 247

 

Tokar Art 49 WoodTurning Sunrise Lotus
By: Dipa Das
September 17, 2015 · 68,404 views

Three Flower bowls from one piece of Beech wood..

 

Makin shavins 246
By: Cap'n Eddie Castelin
September 16, 2015 · 7,052 views

This video is about Makin shavins 246

 

President's Challenge, Sept. 2015
By: Brian Havens
September 15, 2015 · 8,261 views

I have been looking forward to this challenge all year, because it is an opportunity to share some of my methods and tips that I use to turn, dry, and re-turn bowls from green wood. Most of all I want to show two things: First, the 'pivot' cut that I use to round blanks roughed out with a chainsaw, allowing one to bypass the bandsaw (either by preference or because some turners may not have a bandsaw.) Second is my use of alcohol soaking to dry bowl blanks in about one eighth of the normal time. As well, I show an additional re-mounting method that you can add to your repertoire. Cover tool: 'Green bowl gouge' (Actually a 40/40 grind but with the left wing swept back, and an extra long maple handle.) Woods: Ash; Callery Pear

 

Executive Desk Top (part 2) by Sam Angelo
By: WYOMINGWOODTURNER
September 14, 2015 · 7,731 views

Sam makes a segmented spinning top with a base that matches. He call it an 'Executive Top'. This will be a two part series. Part 1 covers gluing up the wood and turning the top..... In this second video---Sam will complete the project.

 

Executive Desk Top (part 1) by Sam Angelo
By: WYOMINGWOODTURNER
September 11, 2015 · 10,327 views

Sam makes a segmented spinning top with a base that matches. He call it an 'Executive Top'. This will be a two part series. Part 1 will cover gluing up the wood and turning the top.....part 2 will complete the project.

 

Tokar Art 48 WoodTurning Tea Tray
By: Dipa Das
September 11, 2015 · 3,825 views

I am Tea Lover.. :-)

 

Holzplugs drechseln
By: Martin Preller
September 11, 2015 · 17,744 views

über YouTube Capture

 

Tokar Art 47 WoodTurning We Are Family
By: Dipa Das
September 06, 2015 · 1,879 views

Linden Tree is a Symbol of Family, Comunity.. Here is big Family Bowl from Linden Wood.. We are Family.. with ALL People, Animals, Trees Birds, Planets, Stars and Universe.. ONE FAMILY.

 

Wood Turning #117 Texted An Earthquake Detector you can make with a Pallet
By: The Tiny Trailer Workshop
September 06, 2015 · 269 views

I guess that now I’ve said I “do” this I had better “do” it ... huh? Well here is a thank you to one of you... and if your name is Ron too... well thank you anyway! But Ron knows who he is and I do hope he and his wife enjoy their Earthquake detector for many years to come! I had a few issues along the way ... things like the ball at the top of the finial.... it was supposed to be the same wood ... but I made three balls from that and they all broke... so I went for a piece of the base! I think it works well! My camera angles for the base are a little lacking but at least it shows the top...

 

Wood Turning #117 An Earthquake Detector you can make with a Pallet
By: The Tiny Trailer Workshop
September 06, 2015 · 1,141 views

I guess that now I’ve said I “do” this I had better “do” it ... huh? Well here is a thank you to one of you... and if your name is Ron too... well thank you anyway! But Ron knows who he is and I do hope he and his wife enjoy their Earthquake detector for many years to come! I had a few issues along the way ... things like the ball at the top of the finial.... it was supposed to be the same wood ... but I made three balls from that and they all broke... so I went for a piece of the base! I think it works well! My camera angles for the base are a little lacking but at least it shows the top...

 

Tokar Art 46 WoodTurning Heaven Crib
By: Dipa Das
September 03, 2015 · 1,231 views

 

Laser Engraved Custom Turned Tap Handle - Collaboration with Zac Higgins
By: Braxton Wirthlin
September 02, 2015 · 1,909 views

I turned this tap handle for a client I completed a large build for as a thank you. It’s turned from white oak and has an alumilite inlay with a laser engraving of the company logo on top. I did this video in collaboration with Zac Higgins at NV Woodwerks. We both used the same footage and came up with two different versions of the final video. He took care of the laser engraving, and the alumilite casting, while I handled the rest. Be sure to head over to Zac’s channel and check out his video and the rest of the awesome content he’s got. Thanks for watching! Zac’s video https://youtu.be/wqJ

 

Notebook Cover
By: Mauro il tornitore
August 29, 2015 · 2,244 views

The cover of my notebook made of olive-wood and wengè. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro La copertina della mia agenda in olivo e wengè. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e sottoscrivere il canale fate una cosa gradita. Grazie. Mauro

 

Jarron torneado
By: Antonio sanchez tortosa
August 27, 2015 · 6,170 views

Jarrón torneado de panel marino e iroco

 

Pizza Cutter Update and explanation for Chris Fisher
By: H F Bowern Designs - Harold Bowern
August 26, 2015 · 332 views

Welcome back. Well after receiving a comment from a good friend and fellow woodturner, Chris Fisher (The Blind Woodturner), and viewing my last video on the pizza cutter, I noticed that I had forgotten to add a lot of detail about the actual measurements and processes of making the handle so that Chris could make form a visual picture of the processes and make his own pizza cutter. The purpose of this video is then to try and add the detail, and hopefully not a lot of confusion, to making the pizza handle. By the way, Chris works with a great charity, in the UK, that supports the visually imp

 

Turned Wiener Dog/Pallet Up Cycle Challenge
By: Carl Jacobson
August 21, 2015 · 13,042 views

I turned a wiener dog for the Pallet Up Cycle Challenge. Go check out Sterling Davis's channel for all the details. Sterling Davis https://www.youtube.com/user/SterlingsWoodcrafts/featured TOOLS I USED IN THIS VIDEO: Lathe: http://www.turnrobust.com/ Turning tools: http://www.easywoodtools.com/ Turning tools: http://thompsonlathetools.com/ Howard wax: http://amzn.to/2ytKvKC Sandpaper: http://woodturnerswonders.com/ Face shield: http://amzn.to/2f5Exaw Drill: http://amzn.to/2yidZIc Drill press: http://amzn.to/2jDBchc Forstner Bit Set: http://amzn.to/2ylvrgE I upload a

 

Monster Wall Hanger: Russian Olive Burl-- Part 3 by Sam Angelo
By: WYOMINGWOODTURNER
August 18, 2015 · 12,649 views

In the final video of this series, Sam focuses on design decisions for his project. He explains the process for each element and how each is incorporated into the wall hanging.

 

Wood Turning #113 Non Texted Pallet Batting
By: The Tiny Trailer Workshop
August 18, 2015 · 492 views

Sterling Davis http://www.youtube.com/watch?v Dx15julPGCU&list PLVRSIqwQ1XHpF4mJemO2Ee2RlzQTbZUPI Karol Kolanowski KK Make http://www.youtube.com/user/polishedwoodworking Custom Chris http://www.youtube.com/channel/UCAGJQfE8Li0xYgt1q5TYuvA Second things first here: Sterling... I am afraid that the ball cannot be entered into the challenge as your name and the date have been inlaid with Ebony. The bat though remains strictly pallet wood. But rules are rules and if this results in a disqualification... I think I might have more ideas brewing! So a walnut pallet... whodathunk? And I find the

 

Wood Turning #113 Texted Pallet Batting
By: The Tiny Trailer Workshop
August 18, 2015 · 3,435 views

Sterling Davis http://www.youtube.com/watch?v Dx15julPGCU&list PLVRSIqwQ1XHpF4mJemO2Ee2RlzQTbZUPI Karol Kolanowski KK Make http://www.youtube.com/user/polishedwoodworking Custom Chris http://www.youtube.com/channel/UCAGJQfE8Li0xYgt1q5TYuvA Second things first here: Sterling... I am afraid that the ball cannot be entered into the challenge as your name and the date have been inlaid with Ebony. The bat though remains strictly pallet wood. But rules are rules and if this results in a disqualification... I think I might have more ideas brewing! So a walnut pallet... whodathunk? And I find the

 

special woodturning projects
By: Nikos Papadopoylos
August 15, 2015 · 280 views

Δημιούργησα αυτό το βίντεο με το Πρόγραμμα επεξεργασίας βίντεο YouTube (http://www.youtube.com/editor)

 

President's Challenge, Aug. 2015
By: Brian Havens
August 14, 2015 · 8,988 views

The third and final President's Challenge this year by my suggestion. Similar to last month, where the topic itself was inadequate to fill a video, this month too I had to find some value added element. And once again it is commercial veneer to the rescue. One of the greatest advantages of commercial veneer is that it is thin enough to cut with a good pair of scissors, so cutting small pieces are perfectly safe and does not require any special jigs. The possibilities are limited only by imagination.

 

Turning A Coffee Tamper
By: Gord Rock
August 14, 2015 · 4,034 views

Turning a tamper to use in tamping down coffee grounds for a coffee machine.

 

Monster Wall Hanger: Russian Olive Burl-- Part 2 by Sam Angelo
By: WYOMINGWOODTURNER
August 12, 2015 · 7,776 views

In this second part of the series, Sam continues to work on the front of the wall hanging. He trues up the front for the final design and prepares for completion of the project in part three.

 

Tokar Art 44 Woodturning Baby Crib :-)
By: Dipa Das
August 10, 2015 · 4,473 views

Big Walnut Bowl with Natural Edge..

 

Monster Wall Hanger: 32 Inch - Russian Olive Burl part 1
By: WYOMINGWOODTURNER
August 07, 2015 · 8,842 views

In part 1 of this series Sam begins to turn a very large Russian Olive burl. He explains his method for chucking it to his lathe and considers deign options. He finishes the back of the piece. (Part 1 of 3 part series).

 

Tokar Art 43 Woodturning Golden Eden
By: Dipa Das
August 06, 2015 · 4,057 views

This video is about rectangular tray with rounded corners from larch wood.. Size 28 to 39 cm.. How i saw this tray when stained and oiled so it occurred to me only: Golden Eden.. :-)

 

Wood Turning #114 Texted A Short Glass Muddler
By: The Tiny Trailer Workshop
August 06, 2015 · 354 views

So ... If you want to cut the other side of the wood ... You have to turn it around? Amazing what you can learn from watching YouTube videos! And Hey!! I got to watch this one first! If these had a practical use I would consider trying more like it! As it is... it was a valiant attempt to bend wood! I had at one point thought that it might look cool if it was a finger squashing everything... But then remembered that you squash with the other end! And seeing as I was getting so good at sanding... (hope you appreciate that Mr. Bmac https://www.youtube.com/channel/UCk6YkskO3CfgrerYjHNityg & Ba

 

#86 A Woodturning Coaster Collaboration
By: Stephen Ogle
August 04, 2015 · 4,094 views

This video is a collaboration between my friend John Williams and myself. John asked me to carve and inlay into some coasters he was working on for a friend and client. I hope you will enjoy this project. You can visit John's Channel at: https://www.youtube.com/channel/UCxqLQhfL5quPYfQDMBQw2zQ/videos

 

Driftwood pieces for Jalyn and family, Success at last
By: MARK Baid
August 04, 2015 · 914 views

After losing a few videos I succeeded in get this one up. These are pieces from a of driftwood log from Sea Cliff. They are turned in remembrance of My Friend Rob . I also show the pieces from the lost videos. I hope you enjoy. Oh ya and I got a tattoo ain't I cool!

 

Tokar Art 41 Woodturning Walnut Classic
By: Dipa Das
July 30, 2015 · 24,835 views

 

Tokar Art 40 Woodturning Little Beauty
By: Dipa Das
July 29, 2015 · 4,278 views

My Friend - Pilgrim gave me a few pieces of exotic wood..

 

#140 Sapele and Plywood
By: Miguel Sanchez
July 28, 2015 · 2,266 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez A platter made of Sapele and Plywood with an easy thin shape to enhance the beauty of the wood itself. I hope you like it. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Tokar Art 39 Woodturning Natural Love
By: Dipa Das
July 26, 2015 · 7,872 views

Our Good Friends visit us.. We play some game in Woodshop.. :-)

 

Wooden Baby Bottle (Sawdust Rd. Woodshop)
By: Johnny Boudreau
July 25, 2015 · 194 views

To my wonderful wife Thanks you For all the joy you bring me and all the love you share. For all the times you guide me Trough all of life despair For the sacrifices you make And the burdens you take. For our amazing family And the happiness they bring me Thank you.

 

Wood turning a Pie Mandrel
By: Tommy Akridge Designs
July 21, 2015 · 19,981 views

Tommy Akridge Designs

 

Tokar Art 37 Woodturning Wild Walnut Heart
By: Dipa Das
July 18, 2015 · 8,382 views

 

President's Challenge, July 2015
By: Brian Havens
July 17, 2015 · 3,739 views

Better late than never, I finally got around to the July President's Challenge. See how I dip into my experience working with flat wood to come up with a way to use commercial veneer to embellish wood turnings. And of course, there are the usual mishaps that always seem to happen as soon as the camera starts rolling.

 

Drinks Cover - Woodturning
By: BMac Woodturning
July 14, 2015 · 2,039 views

This is a simple project that suits scrap wood. It's a cover for your mug, glass, cup, to keep insects and dust out. Martin Saban-Smith - https://www.youtube.com/user/workingimage

 

Making Dowels On the Lathe
By: Ron Brown
July 12, 2015 · 2,649 views

Ron Brown make 1/2' maple dowels on the lathe in about 40 seconds. It's kind of like cheating. Email ronbrown@coolhammers.com for best results.

 

Soap holder 2
By: Mauro il tornitore
July 03, 2015 · 383 views

Another soap holder for my bathroom. Un altro portasapone per il mio bagno. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e sottoscrivere il canale fate una cosa gradita. Grazie. Mauro

 

Woodturning a Roller Ball Massager (part 2)
By: Jerry Paul
June 29, 2015 · 496 views

In the time it took me to edit what began as around 30 minutes of footage, I could have easily made a dozen of these. Hahahaha! Anyway, here it is - part 2 of the Roller Ball Massager. Lots of sped up footage, and it may seem a little disjointed at times, but it is what it is. I'm learning a lot as I go here. LOL

 

Woodturning a Roller Ball Massager (part 1)
By: Jerry Paul
June 29, 2015 · 626 views

I really had to chop this video up... I'm only using Windows Live Movie Maker right now, and my computer isn't powerful enough to handle so much at once... but I think I fixed it. ... (still have to get better editing software though) I hope you enjoy part 1!

 

Turned Candlestick Telephone
By: Carl Jacobson
June 26, 2015 · 11,110 views

I turned this traditional candlestick telephone out of Maple, and Walnut. It's a pretty easy project, it took me less than a day. If you make this project please share, you can always share your project on my website too. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yah

 

June 22, 2015 acorn
By: Gary Harris
June 22, 2015 · 4,472 views

WOODTURNED ACORN FROM LAUREL TREE

 

Tokar Art 35 Woodturning Solstice Celebration
By: Dipa Das
June 21, 2015 · 2,863 views

Solstice Today.. for Sun Celebration i made Wild Walnut Bowl.. with holder.. with Home made Bread.. :-)

 

SPSW 055 Sorby projects with Nick Cook
By: SPSW Video Library
June 20, 2015 · 580 views

Sorby Tools produced a series of 8 videos featuring Nick Cook demonstrating different projects. All 8 projects are included here. Nick uses Sorby tools throughout. No surprise there given that these were Sorby produced videos.

 

Tokar Art 33 Arc of Love 3-center turning of double Ellipse..
By: Dipa Das
June 15, 2015 · 9,981 views

Special Gift for a Friend who just getting married! Double Ellipse with two off-center bowl.. As two linked wedding rings.. Forever Together.. Love, Love, Love.. :-)

 

Tokar Art 32 Woodturning Earth Transformation from Cube to Flower
By: Dipa Das
June 13, 2015 · 19,374 views

..in Sacred Geometry is Cube a symbol of the Earth.. ..but really the Earth is a Flower of Universe.. ..How to make from 16cm Cube 21cm Cosmic Flower? ..Here & Now.. Earth Transformation..

 

Tokar Art 29 Woodturning Tree Yesterday - Turn Today
By: Dipa Das
June 07, 2015 · 2,238 views

Three type of Tree.. Three type of Shape.. All cames like Gifts.. Not really cut yesterday, but just 2-3 weeks after cutting.. Green Pine, Maple & Walnut wood..

 

Tokar Art 28 Woodturning SunShine & FullMoon
By: Dipa Das
June 07, 2015 · 3,224 views

Today is a Sunny day! and Tonight is a Full Moon!.. OK, for Celebration of Sun and Moon i make two similar bowls..

 

Walnut Furniture Sliders
By: Daniel Vilarino
June 07, 2015 · 780 views

Hola/Hi! Este video está en Inglés, si prefieres verlo en Español, por favor chequea en mi canal de YouTube o haz un click en el siguiente enlace: http://youtu.be/T4JZHCIjows Gracias!! ***This video is in English*** ***Hi my friends, I would like to apologize for being absent for several weeks.*** ***With Paula we decided to change the floors of the house. This implied moving stuff from one floor to another, and then, since the walls were accessible, we took advantage of that to paint ceilings, walls, windows and doors.*** ***The project included me remodeling a powder room, exchanging th

 

Deslizadores para Muebles en Nogal
By: Daniel Vilarino
June 07, 2015 · 3,230 views

Hola/Hi! ***This video is in Spanish, if you prefer to see it in English, please check that version in my YouTube channel, or click in the following link: http://youtu.be/tooYUS8kWfY thank you!!*** Este video está en Español. Hola Amigos, les pido disculpas que he estado ausente por algunas semanas. Con Paula nos hemos metido a cambiar los pisos de la casa, esto implicó mudanza de objetos de un piso a otro, y luego, ya que estábamos, aprovechamos a pintar techos, paredes, puertas y ventanas. El proyecto de remodelación involucró que cambiara el vanity de un bañito, su grifería, etc. Y tam

 

President's Challenge, June 2015
By: Brian Havens
June 06, 2015 · 5,137 views

After ribbing my good friend and fellow YouTuber, Todd Clippinger (https://www.youtube.com/user/toddclippinger), I set out to find a way to make an 'embellished' turning. Since I am terrible at things like carving and coloring wood, I looked to one of my woodturning fortes: multi-axes, to find some clever and novel way to embellish a bowl right on the lathe.

 

Tokar Art 27 Woodturning Cosmic Grace
By: Dipa Das
May 29, 2015 · 10,036 views

This is Double Ellipse (galaxy) bowl, which is made for Celebration of Higher Consciousness, because We are Here just because is.. Cosmic Grace.. Thanks..

 

Tokar Art 26 Woodturning Celebration of Fire Element
By: Dipa Das
May 29, 2015 · 17,895 views

How to make Double Triangle Bowl - Candle holder..

 

Wood Turning #105 Winders
By: The Tiny Trailer Workshop
May 28, 2015 · 1,646 views

Winders! Who'da'thunk? Well that was interesting! I will have to remember that hot glue isn't the glue of choice for this type of project! But in he end it managed OK! In watching this while editing I found it funny that I was concerned about only having a 1 inch forstner bit... there was a hole that ran all the way through so a spade bit would have worked just fine! And I have them in all sizes!... well not all ... but I could have done this project nicely! I am not sure if this was long because of the project or the way I felt but it only took 5 days to put it all together! Well 7 if you co

 

Wood Turning #105 Texted Winders
By: The Tiny Trailer Workshop
May 28, 2015 · 454 views

Winders! Who'da'thunk? Well that was interesting! I will have to remember that hot glue isn't the glue of choice for this type of project! But in he end it managed OK! In watching this while editing I found it funny that I was concerned about only having a 1 inch forstner bit... there was a hole that ran all the way through so a spade bit would have worked just fine! And I have them in all sizes!... well not all ... but I could have done this project nicely! I am not sure if this was long because of the project or the way I felt but it only took 5 days to put it all together! Well 7 if you co

 

Basin & Pitcher by Al Furtado
By: Rebel Turner
May 27, 2015 · 2,500 views

I turned 2 pieces a Basin and a Pitcher out of what I believe to be Ash and kept them together as they seem to be a perfect pair and set up as an old style Basin and pitcher. The pitcher I decided to keep a natural edge on it.

 

Tokar Art 22 Woodturning More Than Gold
By: Dipa Das
May 19, 2015 · 6,732 views

Every Tree, every Wood is for me More than Gold.. And this Walnut bowl is Special for me, because is from my Grandmather Garden..

 

Woodturning a Corkscrew
By: Cip's Wood Chips
May 18, 2015 · 6,557 views

After making a bottle opener from a wine bottler I made a corkscrew from the remaining parts. I used a small tree branch for the wood handle.

 

Tokar Art 21 Woodturning - Little Sunday Game
By: Dipa Das
May 17, 2015 · 73,369 views

 

Woodturning Twisted Horns Of A Dilemma
By: As Wood Turns
May 16, 2015 · 2,415 views

http://www.AsWoodTurns.com I've wanted to turn this project every since seeing Michael Hosaluk demonstrate it. It is basically a turned box but with a twist. The top and bottom are elongated. Then at the band saw, each is sliced, the segment turned about 180 degrees then re glued. In this case, the top and bottom segments were sliced and re glued twice each. This process gave them a bit of an arc. The inside surface is distressed while the exterior is sanded into a flowing shape. Finally, the box is painted with acrylic paint and a texture applied of acrylic gel. With no grain alignment, there

 

wood-turning a wooden shot barrel
By: Robbiethewoodturner
May 15, 2015 · 34,847 views

Hi all hers a little video on how to make a little shot mug in the form of a barrel Here's a list of my latest videos wood turning a Barrel follow up video https://www.youtube.com/watch?v Lz1T05PbteE Wood-turning a Coopers Barrel https://www.youtube.com/watch?v fIP_rV3NC94 Wood-turning Multi-axis paper knife https://www.youtube.com/watch?v XFSeREl5E-k Welcome to my wood turning channel, I have lots of free videos with wood turning tips and projects. Taking you from start to finish with a piece of rough wood turned on a lathe. enjoy.

 

Woodturning Bookends Split Woodturning!
By: Peter Matthew
May 15, 2015 · 396 views

Check out my eBay: http://www.ebay.com/usr/dste6080 Thank you for watching! Please subscribe!

 

Ejercicio Como hacer piezas pequeñas en la copa fija o Cepo-Arte en Torno
By: Arte en Torno
May 15, 2015 · 7,490 views

En este ejercicio práctico, Cesar nos muestra como a través de la copa fija o cepo, se hacen piezas pequeñas utilizando la gubia y el sesgo.

 

Woodturning Ambrosia Maple with an Evil Wood Troll
By: Adze Woodturning
May 08, 2015 · 2,990 views

My turning has been off the last couple of days. I guess you could say scatter brained has been the rule. Every time I introduce a new tool to the shop there seems to be a learning curve. Be warned this video is a hodge podge. Have a great Mother's day!

 

Tokar Art 20 Woodturning Children of Dune
By: Dipa Das
May 08, 2015 · 15,934 views

Have you read the book (movie) 'Dune' from Frank Herbert? I was inspired by it for today's turning game a try at the Double-axis turning Apricot wood .. Čítali ste knihu (film) 'Duna' od Franka Herberta? Inšpiroval som sa ňou pre dnešnú hru a vyskúšal si pri tom Dvojosé točenie..

 

woodturning a Barrel follow up video
By: Robbiethewoodturner
May 07, 2015 · 5,477 views

hi all just a quick thank you and follow up video Here's a list of my latest videos Woodturning a Coopers Barrel https://www.youtube.com/watch?v fIP_rV3NC94 -------------------------------------------------------------------------- Woodturning a clock https://www.youtube.com/watch?v J3AuDQ3rIy0 #WOODTURNING A PORTHOLE CLOCK https://www.youtube.com/watch?v ThYC2pvJIn4 Woodturning a yew natural edge hollow Form https://www.youtube.com/watch?v XkokZ_CrDLM Welcome to my wood turning channel, I have lots of free videos with wood turning tips and projects. Taking you from start to finish with a piece of rough wood turned on a lathe. enjoy.

 

President's Challenge, May 2015
By: Brian Havens
May 06, 2015 · 9,629 views

See how simple projects, like turning mushrooms, can afford us an opportunity to take risks and explore new techniques and design ideas, including turning perceived 'flaws' into embellishments.

 

Porta Perfume en Cocobolo Parte 2 Torneado
By: Daniel Vilarino
May 05, 2015 · 2,937 views

Hola/Hi! Este video está en Español. ***If you prefer to see this video in English please check my YouTube Channel.*** http://youtu.be/ytZdCiSaEck Este es el segundo de dos episodios sobre la realización de un porta perfume en Cocobolo. En este episodio muestro la etapa de torneado. ***This is the second of two episodes in which I show how to make a Cocobolo perfume holder. In this episode I show the turning stage.*** Ojalá que hayan disfrutado de este episodio y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed this episode and

 

Cocobolo Perfume Holder Part 2 Turning
By: Daniel Vilarino
May 05, 2015 · 1,031 views

Hola/Hi! ***This video is in English***. Si prefieres ver este video en Español, por favor busca esa versión en mi canal de YouTube. http://youtu.be/u4BmxTtlAyk Este es el segundo de dos episodios sobre la realización de un porta perfume en Cocobolo. En este episodio muestro la etapa de torneado. ***This is the second of two episodes in which I show how to make a Cocobolo perfume holder. In this episode I show the turning stage.*** Ojalá que hayan disfrutado de este episodio y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope you enjoyed th

 

a custom kilner jar top
By: Bram the Wadesmill woodturner
May 05, 2015 · 241 views

Description

 

Star Wars Colaboration Jedi Order Insignia
By: RJBWoodTurner
May 04, 2015 · 6,186 views

A number of YouTube woodworkers got together to do a collaboration for Star Wars Day. For my project I decided to turn the insignia of the Jedi Order. Regards, Bob List of woodworkers participating in the collaboration: https://docs.google.com/document/d/1iR0fmpZLBhAnSdXDMqweqzZyTpPmmg1ZbpXKW3VGXL8/edit?usp sharing

 

Cocobolo Perfume Holder Part 1 Design
By: Daniel Vilarino
May 04, 2015 · 596 views

Hola/Hi! ***This video is in English***. Si prefieres ver este video en Español, por favor busca esa versión en mi canal de YouTube. http://youtu.be/-o1Z8pa-XA4 Este es el primero de dos episodios sobre la realización de un porta perfume en Cocobolo. En este episodio muestro la etapa de diseño, en el próximo mostraré la realización del torneado. ***This is the first of two episodes in which I show how to make a Cocobolo perfume holder. In this episode I show the design stage, in the next one I will show the actual turning.*** Ojalá que hayan disfrutado de este episodio y si fue así, por fav

 

Porta Perfume en Cocobolo Parte 1 Diseà o
By: Daniel Vilarino
May 04, 2015 · 1,821 views

Hola/Hi! Este video está en Español. ***If you prefer to see this video in English please check my YouTube Channel.*** http://youtu.be/lbY_puM6NLY Este es el primero de dos episodios sobre la realización de un porta perfume en Cocobolo. En este episodio muestro la etapa de diseño, en el próximo mostraré la realización del torneado. ***This is the first of two episodes in which I show how to make a Cocobolo perfume holder. In this episode I show the design stage, in the next one I will show the actual turning.*** Ojalá que hayan disfrutado de este episodio y si fue así, por favor realicen co

 

Woodturning a Coopers Barrel
By: Robbiethewoodturner
May 03, 2015 · 123,066 views

Woodworking Europe Collaboration Build 2015 Please check out the other participants of the 'Woodworking Europe Collaboration Build 2015' Peter Freitag; Channel: PeteTGIF; Germany, Lower Saxony; Language: English; Video: http://youtu.be/2bIL0cRGt28 Gerrit Klaassen; Channel: Not Just Sawdust / Não Só Serradura; Portugal, Santarem; Language: English; Video: https://youtu.be/sgK-sQj0toE Karol Kolanowski; Polish-ed Woodworker; England; Language: English; Video: https://youtu.be/PSrlOTFw4lk Sergio Acuña Padin; Channel: Enredando No Garaxe; Spain; Language Spanish; Video: http://youtu.be/h-mthMXg4Og

 

Woodturning: Tiny Scraps
By: Roundabout Woodworks
April 25, 2015 · 448,163 views

I can't seem to throw away scraps of wood. Even the smallest pieces wind up in a pile or a bowl. If you also have this problem, this video is probably only going to reinforce your malady. I take my smallest scraps and show how to make them less trash-worthy. This is Peter Brown's video that I mentioned: https://www.youtube.com/watch?v MSaSHVPtlrU

 

Saved from the ashes..Wood turning.
By: LivingArtsCo
April 22, 2015 · 265 views

Wood turning a piece of firewood.. Dry but keeps on cracking...

 

Half Sphere Table on Face Plate Lathe
By: marksupikco
April 17, 2015 · 1,002 views

Joe Supik turning a half sphere table on the 1944 Oliver Face Plate Lathe. The wood is reclaimed Douglas Fir from some of Baltimore's dismantled vinegar tanks.

 

Willem's Wonderful Wrustic Willow Windmill
By: Willem Kossen
April 16, 2015 · 2,037 views

The woodworking community in Europe has planned a collaboration. We will show you something from our countries. This is my entry in the collaboration, a Dutch Windmill made from Willow. Dutch: knotwilg. (see below for a list of the other participants) I'm using my lathe-jig-with-a-drill and my 30yo underpowered dewalt minibandsaw and my Ferm drillpress to make this item. the wood is stell wet, so i didn't finish it, any checking will enhance the rustic character. video was recorded and edited at the beginning op April and planned for release at the agreed time and date. music all from the Y

 

Art piece long version
By: The Woodshop
April 13, 2015 · 1,309 views

Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

Making A Ball & Socket Joint
By: Gord Rock
April 13, 2015 · 15,720 views

How to make a Ball & Socket Joint. Filing a threaded rod to create the ball & making a socket of wood. Here is the link to the project I needed the ball & socket joint for: https://youtu.be/KaB8s9sYnOM

 

Graduation Cap Follow-up
By: Carl Jacobson
April 06, 2015 · 3,478 views

Graduation Cap Follow-up. Liz's Barbie Cake Video https://www.youtube.com/watch?v IUI7Sn0X_7k I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits https://www.chefwarekits.com/?tracking carl Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/1618929

 

President's Challenge, Apr 2015
By: Brian Havens
April 05, 2015 · 4,127 views

This month's challenge is to 'safely' turn a winged piece. Although I suggested this month's challenge, and even demonstrated making winged bowls at my local club this past January, that did not make me immune to catastrophic events. But if at first you do not succeed, aim even higher next time. Cover tool: 1' (1/4' thick) square-end negative rake scraper (reground from a Ashley Iles 'shear' scraper) Wood: Privet

 

Intro video - Wood turning a maple piece - Part 1
By: The apprentice
April 05, 2015 · 969 views

This piece of Maple started it's life as a cut down tree in my neighbour's yard waste pickup. A girl from work had asked me to keep an eye out for stumps the very same day and miraculously I found these across the street. I turned a few small vases out of the smaller limbs and this is the remainder of the pieces I picked up. In this video I free form turn the piece into a vase/spit bowl for my brother who asked me for one, an idea which occurred to me while turning. Thanks go to Erika G. Simon for believing in me/motivating me, Rob Robichaud for providing the chainsaw and cutting the log down so it would fit on the lathe and Carl Jacobson amongst many of the wood workers and wood turners in the YouTube community for their inspiring videos.

 

Tree Coasters
By: Jerry Brown
April 01, 2015 · 1,209 views

Dominic Bender has a tree challenge going on and this is what I made... after the first thing I made did not work... Turning a green branch is not good. :) Project #68!

 

Stone and wood
By: Mauro il tornitore
March 28, 2015 · 751 views

A nice stone, carved and worked by water for many thousands of years, finds its better position on a wooden base with a support made on the lathe. To see other stone and wood marriages watch my old video: https://youtu.be/2lbIc4UxmyU

 

Woodturning A Spiral Twist 2015 Boston Woodturning
By: Boston Woodturning
March 28, 2015 · 2,352 views

Woodturning A Spiral Twist 2015 Boston Woodturning Here is how I made a double spiral twist into a quad spiral twist!

 

Old time speaker
By: woodturner21
March 25, 2015 · 699 views

A customer wanted a base to show off this speaker

 

Soap holder
By: Mauro il tornitore
March 21, 2015 · 1,080 views

A soap-holder for my bathroom. Made on the lathe, of course...

 

Wood turning Ear Bud Holder
By: Gabe Castro
March 21, 2015 · 181 views

how to turn wood ear bud holder on mini lathe.

 

Bacote Wood Darts - Hand turned - FireFlyGoods.com
By: FireFly Goods
March 21, 2015 · 723 views

Hand turned hardwood darts. Bacote wood. Set of 3. Custom weight and assembled to order. Order THIS set of darts being made or one like it HERE: https://www.etsy.com/listing/226891246/hand-turned-darts-bacote-custom-weight Ready to go...! FireFlyGoods.Etsy.com

 

Outboard Woodturning
By: Custom Chris
March 20, 2015 · 11,933 views

No longer making the Handles in this video. For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Crazy Burl Bowl Stand
By: WYOMINGWOODTURNER
March 18, 2015 · 9,960 views

Sam completes his Burl Bowl project by making a stand that is a mirror image of the burl.

 

Indian Rosewood - Hand turned darts (4 dart set)
By: FireFly Goods
March 18, 2015 · 328 views

Indian Rosewood - Hand turned darts (4 dart set). Handmade in the United States by http://www.FireFlyGoods.com This is a custom set I turned for a customer. You can order a set similar or find a completed and ready to assemble set on our @etsy shop. https://www.etsy.com/shop/FireFlyGoods?section_id 15900276

 

Reversing Evolution and Time Travel, the Challenge Tree
By: Willem Kossen
March 16, 2015 · 553 views

So i made something out of a tree. Dominic Bender hosts the March 2015 Challenge Tree Challenge which he announced here: https://www.youtube.com/watch?v Qp9U4XjeHk8 and this is my entry! This is my first woodworking video (unless you call playing a woodwind instrument woodworking of course, check it out!). There might be more in the future. Also, editing movies isn't my specialty (and it shows). This movie is made using imovie on a slow macbook, and i voice-overed the descriptive narrative using the build-in microphone from the mac. not the best setup. advice welcome, as well as better equip

 

#122 Ogee shape
By: Miguel Sanchez
March 10, 2015 · 10,978 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Un primer acercamiento a este fantastico perfil para hacer cuencos y platos, espero que os guste. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Fire Starter-Bocote-Chispero Encendedor
By: Daniel Vilarino
March 10, 2015 · 29,868 views

Hola Amigos!/***Hi my Friends!*** En este video realizo la empuñadura para un chispero encendedor para mi amigo Eric. ***In this video I make the handle for a fire starter for my friend Eric.*** El 5 de marzo, día de gran nevada, fue su cumpleaños y el martes 10 de marzo lo invité a mi casa junto a su esposa y otros amigos para compartir una parrillada, así que voy a aprovechar a subir el video y darle el regalo ese día! ***On march 5, day of a snow storm, it was his birthday, and on Tuesday, March 10, I invited him together with his wife and some other friends to share a barbaque, so I will

 

President's Challenge, Mar 2015
By: Brian Havens
March 09, 2015 · 13,580 views

This month, the President's Challenge is to make an inside-out turning. I discovered a different style of inside-out turning, different than the enclosed forms I have done in the past. Also witness a little mishap with a big bang.

 

Wood Turning #99 Texted Prunings or What you can make out of a Tree
By: The Tiny Trailer Workshop
March 05, 2015 · 1,366 views

This was an interesting project! I had done my spillikans a year or so ago and that one small but it was spindle work... This creates a much larger problem... In that you have to be able to hang on to it somehow! But now that I've turned them I wonder how much I will have to worry about them warping?! I see that the fig splash I turned for the tealight holder in the last video... has done some warping already! Makes it look even better! These should probably have been made into 3 or 4 videos... But as the most timely part of each project is getting it held in place. I would recommend that any

 

Wood Turning #99 Prunings or What you can make out of a Tree
By: The Tiny Trailer Workshop
March 05, 2015 · 2,778 views

This was an interesting project! I had done my spillikans a year or so ago and that one small but it was spindle work... This creates a much larger problem... In that you have to be able to hang on to it somehow! But now that I've turned them I wonder how much I will have to worry about them warping?! I see that the fig splash I turned for the tealight holder in the last video... has done some warping already! Makes it look even better! These should probably have been made into 3 or 4 videos... But as the most timely part of each project is getting it held in place. I would recommend that any

 

Corso di Tornitura : Perfezionamento
By: Truciolara
March 05, 2015 · 8,703 views

Tornire tallonando nell'ombra del legno richiede tanta concentrazione. I risultati sono vere opere d'arte.

 

8 sided Tazza part 2
By: Woody Turner
March 05, 2015 · 275 views

Produced with CyberLink PowerDirector 13

 

8 sided Sycamore Tazza part 1
By: Woody Turner
March 05, 2015 · 403 views

Produced with CyberLink PowerDirector 13

 

drechseln eines Blumenübertopfes [HD]
By: Tiroler Drechsler
March 05, 2015 · 16,768 views

Perfekte Deko für den Frühling, ein Übertopf mit Rinde. _____________________________ Kamera: Sony Xperia Go Have fun! \( _ )

 

Ice on the wood Lathe - Beautiful Project
By: Ed Krystosek
March 02, 2015 · 558 views

Turning Ice on a wood lathe. Stunning finished product. The possibilities are endless.

 

Aroma Fountain for Aromatherapy
By: PeteTGIF
March 01, 2015 · 766 views

Small Fountain for Aromatherapy. Turned from Teak and the left over core from the bangle I made a while ago. ----------------------------------------------------- In order to help my channel and my therapy running, please donate via my homepage: http://thankgoditsfriday.de/html/donations.html As I'd like to give something back to you, I'll make a 'giveaway' in 4 weeks time. On March 22nd, everyone who donated 10 EUR will be in the drawing. At the moment there's my Teelight Candle Holder from Outer Space in as a prize, but I think up to the 22nd, there will be more! So here are the 'rules' for

 

Flying Saucer full version
By: The Woodshop
February 27, 2015 · 2,975 views

This is a 16' Maple burl, and Mahogany flying saucer. it stands 8' tall. Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

Live Show #2
By: The Woodshop
February 23, 2015 · 2,225 views

In this video I turned a duck call Echo Calls also has the bands http://www.echocalls.com Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking carleasy Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

Wood turning 5 cube into a Dice on the lathe with my Grandson.
By: Rebel Turner
February 22, 2015 · 99,121 views

I made a 5' dice out of Western Red Cedar and hollowed it out with the help of my Grandson during the turning he had many ideas of what I should turn next, for one he thinks I should turn some Lego blocks LOL.

 

Phone Wire Hair Stick Follow-up
By: Carl Jacobson
February 16, 2015 · 7,228 views

Live show Saturday February 21st 11:00 am PST. Woodworking in America http://videowoodworkers.com/ Peter's video https://www.youtube.com/watch?v TJlLKsN9R0I James Wegner http://www.youtube.com/channel/UC7Nn50luMgIVfrJiyknFSxg I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits https://www.chefwarekits.com/?tracking carl Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google htt

 

Valentines Gift 2015
By: RJBWoodTurner
February 15, 2015 · 1,891 views

I made my wife a small wall hanging for Valentines Day. Here's a video chronicling the built. Happy Valentines Day, Bob

 

Entry For Puzzle Competition
By: BMac Woodturning
February 14, 2015 · 1,669 views

This is the entry I made for the puzzle competition in the woodturning guild I belong to.

 

Telephone Wire Hair Stick
By: Carl Jacobson
February 13, 2015 · 95,275 views

I teamed up with Peter Brown this week. He used some of my recycled automotive paint to make the barrette, and I used some of his recycled phone wire to make the hair stick. Peter Brown's channel https://www.youtube.com/user/kludge1977 Peter's video https://www.youtube.com/watch?v TJlLKsN9R0I Tools used in the videos Lathe Robust: http://www.turnrobust.com/ Easy Wood Tools: http://www.easywoodtools.com/ Howard beeswax: http://amzn.to/2zAv185 Band saw: http://amzn.to/2AlMUEP Face Shield: http://amzn.to/2y5gDQx sandpaper: http://woodturnerswonders.com/ I upload a new p

 

Display stand for lathe turned art
By: WYOMINGWOODTURNER
February 13, 2015 · 2,669 views

Sam shows the process for making a display stand for artwork. This display unit has glass shelves that measure 20' x 24' and is about 6 feet tall. It is suitable for your gallery or for a craft show.

 

Mini Barbells
By: BMac Woodturning
February 13, 2015 · 559 views

These are for premature babies to help them develop their grasp reflex but I had to make them work harder so made little barbells for them.

 

Routing on a lathe
By: BMac Woodturning
February 12, 2015 · 3,234 views

I need to make depressions on a playing surface to hold little wooden balls. I'm using a Oneway Drill Wizard and a 1/4' Black and Decker router.

 

Winged Tabletop Tiki Torch
By: PeteTGIF
February 10, 2015 · 774 views

After Brendan challenged Carl to make a winged Teelight Candle Holder, I thought to jump on that idea. As I never want to compete with the awesome work of Brendan Stemp, Carl Jacobson or Alan Stratton, but do love turning candle holders because of the romantic atmosphere which comes up when lighting a candle, I thought about turning this Winged Tabletop Tiki Torch. I tuned this piece by only using a glue block and a jam chuck. Wood used: Cherry (12 cm square and 5 cm thick), Sapele (4 inches diameter and 2 inches thick) Metal insert for a Tiki Torch http://www.lederkram.de/image_big.php?image

 

President's Challenge, Feb 2015
By: Brian Havens
February 09, 2015 · 14,988 views

See how I come up with a multiaxis interpretation of Rude Osolnik style candlesticks, using a technique called 'Therming'

 

Celtic Knot Glue Up - Part 3
By: John Bare
February 09, 2015 · 872 views

Celtic Knot for Spinele Part 3 The Glue-Up slipped on me causing an off centered knot, more of a Granny Knot now. Too bad, but it is what it is. The process of the cutting and gluing was shown in the previous videos. Slipping of the glue joint is hard to deal with, doable as I have done OK in the past doing just what I did here but perhaps was more careful.

 

Celtic Knot Glue Up Part1
By: John Bare
February 08, 2015 · 3,675 views

Detailed description of creating a 'Celtic Knot' in a spindle blank..

 

فيديو0005
By: Ahmed wood turner
February 08, 2015 · 37 views

عمود دولاب

 

Bill Dauer Demonstrates Intarsia
By: Adze Woodturning
February 07, 2015 · 10,994 views

An Impromptu video taked at Water Gap Wood Turners. Bill deomonstrates Intarsia and briefly touched on incorporatting it into wood turning.

 

Coral Form
By: Neil Turner Artisan
February 05, 2015 · 326 views

The making of Coral Form... 475mm Dia x 65mm H x 3.5mm Sheoak 24 hrs drawing, 140 hour to embellishment… Over 21,000 pentagon shaped holes, approx 315,000 pierced holes within the pentagon shapes. An old woodturning friend gave this sheoak to me 15 years ago and I said to him at the time…”why are you giving me this timber?”…His reply “I no one day you will create something special with it” ….. I hope I have..

 

Woodturning a 90mm ball cap
By: woodturner21
February 04, 2015 · 1,946 views

Hand turning a newel cap in pine to match photo

 

Driver handles
By: micpen22
February 03, 2015 · 149 views

Screw Driver handles fuller video not speed ups.

 

woodturning a small base
By: woodturner21
February 03, 2015 · 1,156 views

Turning a watch stand base for my off center stand Finished stand available at my web site Thewoodturners. Com

 

Woodturning More Yew Bush
By: Custom Chris
January 30, 2015 · 24,168 views

More bush for Yew and Me https://famebit.com/u/CustomChris For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Handle with Compartment for an Awl
By: PeteTGIF
January 30, 2015 · 3,756 views

Working on a low budget gets me into using one piece of hardware from my Christmas present. Today you'll see how I make a handle with compartment for a chuck which holds a needle, so the whole piece turns into an Awl. The compartment is meant to hold the needle or other accessories which might fit the chucks. ------------------------------------------------- If you like to send me some stuff or donate to my channel in order to help me to continue with my therapy, check out my website international English http://www.thankgoditsfriday.de/html/donations.html German http://www.thankgoditsfriday.d

 

Sun follow-up and a little Ice Sculpture.....
By: Carl Jacobson
January 26, 2015 · 3,973 views

This is the follow-up video for the Redwood sun I did Friday. Thank you everyone for joining me on the live show Saturday too. Bob's Channel RJBwoodturner https://www.youtube.com/watch?v NGZV4L8ycyo Paul Crabtree 5hmtools@gmail.com 253-273-2147 Thank you for supporting free woodworking videos. Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits https://www.chefwarekits.com/?tracking carl Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.co

 

my woodturning projects part 2
By: Nikos Papadopoylos
January 26, 2015 · 102 views

Δημιούργησα αυτό το βίντεο με το Πρόγραμμα επεξεργασίας βίντεο YouTube (http://www.youtube.com/editor)

 

woodturning projects by nikos papadopoulos
By: Nikos Papadopoylos
January 25, 2015 · 184 views

Δημιούργησα αυτό το βίντεο με το Πρόγραμμα επεξεργασίας βίντεο YouTube (http://www.youtube.com/editor)

 

Redwood Inlaid Sun
By: Carl Jacobson
January 23, 2015 · 7,872 views

I inlaid this beautiful piece of Redwood burl into a piece of quilted Maple. I was inspired by a scroll saw project I saw awhile back. Tools used in the videos Lathe Robust: http://www.turnrobust.com/ Easy Wood Tools: http://www.easywoodtools.com/ Thompson Lathe Tools: http://thompsonlathetools.com/ Howard beeswax: http://amzn.to/2zAv185 Face Shield: http://amzn.to/2y5gDQx sandpaper: http://woodturnerswonders.com/ Power Sander: http://woodturnerswonders.com/ Router: http://amzn.to/2Bp6znH Carving set: http://amzn.to/2k37ypm I upload a new project video every Friday, and

 

The Blind Wood Turner - Episode 19 - An Old Vampire Stake
By: Blind Woodturner
January 23, 2015 · 1,363 views

In this installment, the blind wood turner, creates a solid oak vampire stake for a horror fan.

 

Wood turning ideas
By: Georgios Paschalias
January 22, 2015 · 282 views

 

Endstück für Vorhangstange [HD]
By: Tiroler Drechsler
January 21, 2015 · 2,814 views

Im letzten Video drechselte ich Halterungen für eine Vorhangstange in einem unserer Zimmer. Heute möchte ich die Enden der Stanger mit Endstücken versehen. Diese drechsle ich jetzt in diesem Video. Hier zu den Halterungen: https://www.youtube.com/watch?v Lo7UA_136m4 ____________________________________________________ Kamera: Sony Xperia Go Have fun! \( _ )

 

How To Make A Wood Xacto Knife
By: Phil Gershwin
January 20, 2015 · 6,757 views

Gershwinwoodcraft teaches you how to make your own wooden xacto knife! We hope you like it! Filmed and edited by: Sam Gershwin

 

Woodturning Carving Knife and New Wood Delivery
By: Custom Chris
January 16, 2015 · 1,938 views

Great tool to add to your shop arsenal. Fits the hand nice https://famebit.com/u/CustomChris For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

WoodTurning - Support for pizza. oak wood
By: Confusion Wood
January 16, 2015 · 2,155 views

http://www.youtube.com/subscription_center?add_user ConfusionWood my channel: http://youtube.com/ConfusionWood

 

Wood turning lesson. She's going in the potbelly
By: Adze Woodturning
January 15, 2015 · 287 views

Wood turning lesson 'she's going in the potbelly.'

 

Maple Burl Watch
By: Carl Jacobson
January 09, 2015 · 26,760 views

I had a lot of fun making this watch. I was working off a picture on my phone so there was a lot of trial and error, but it all worked out in the end. Tools I use in the videos Lathe Robust: http://www.turnrobust.com/ Easy Wood Tools: http://www.easywoodtools.com/ Thompson Lathe Tools: http://thompsonlathetools.com/ Howard beeswax: http://amzn.to/2zAv185 Face Shield: http://amzn.to/2y5gDQx sandpaper: http://woodturnerswonders.com/ Band saw: http://amzn.to/2AlMUEP Spindle sander: http://amzn.to/2zjIf6e I upload a new project video every Friday, and I'm live Monday, Wednes

 

Wood turning A Multicolored ring
By: Hendrik van Taak
January 06, 2015 · 2,541 views

A video explaing how to turn a multicolored ring/hanger. I dedicate it to Joseph of the Bible. A ring to compliment his multicolored coat.

 

Drechseln von Lockenwickeln
By: Martin Preller
January 03, 2015 · 1,209 views

über YouTube Capture

 

Woodturning Conductor's Baton
By: Custom Chris
January 02, 2015 · 12,203 views

Wish I knew a conductor lol https://famebit.com/u/CustomChris For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Turning a Muddler
By: Michael Blair
January 01, 2015 · 1,091 views

Woodturning with Mike at Wetheredwood.Shot 100% with Sony's Action Cam #SonyActionCam #ProveYourself - Captured Live on Ustream at http://www.ustream.tv/channel/woodturning-at-wetheredwood

 

Woodturned Guitar Holder (Wallhook)
By: DrexlFlo
December 28, 2014 · 131 views

Facebook: https://www.facebook.com/drexlflo/ Twitter: https://twitter.com/drexlflo/ Instagram: https://www.instagram.com/drexlflo

 

TORNEADO ARTESANAL 2014
By: JOSE ALBERTO GIORDANO
December 25, 2014 · 1,074 views

Realicé este video con el Creador de presentaciones de diapositivas de YouTube (http://www.youtube.com/upload).

 

Turning an Eyeglasses Holder
By: RickTurns
December 23, 2014 · 11,367 views

Woodturning: Turn an eyeglasses holder.

 

Copy of Woodturning a shave horse leg.
By: Adze Woodturning
December 21, 2014 · 284 views

Turning a Shaving Horse Leg out of Green American Walnut

 

Woodturning knotty by nature
By: Custom Chris
December 19, 2014 · 141,794 views

Like a knot on a log https://famebit.com/u/CustomChris For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Woodturning Sneek Peek Knot
By: Custom Chris
December 16, 2014 · 1,246 views

Here is a up and coming Project .. Stay tuned. https://famebit.com/u/CustomChris For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Woodturning a shave horse leg.
By: Adze Woodturning
December 13, 2014 · 225 views

Turning a Shaving Horse Leg out of Green American Walnut

 

Balusters
By: Ron Brown
December 10, 2014 · 831 views

Ron Brown turns Porch Balusters for a 100 year old classic home.

 

DIY Lightsaber
By: The Woodshop
December 01, 2014 · 6,172 views

I turned a Lightsaber! I did some inside out turning on the staff, so the light would shine through. Ways you can support the show ChefwareKits https://www.chefwarekits.com/?trackin... Nova Infinity System http://www.novainfinitychuck.com/land... Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl Welcome to my channel, I have a new project video every Friday with wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project.

 

Something a little different: Tuning Pegs
By: Bob Hamilton
December 01, 2014 · 23,445 views

This video shows how I made some tuning pegs for ukeleles. It was interesting trying to figure out how to make the pegs reasonably efficiently and gave me some welcome practice with the skew chisel. This sort of thing would be impossible to do if I were relying on income from woodturning to put food on my table, but as a hobby turner I don't necessarily have to only do things that make economic sense. :D When I was in full swing I was able to crank out about 2 dozen pegs in a 3 hour turning session, so the full 100 pegs probably took about 13 hours of lathe time plus the time to mill the stock and cut the blanks, which would add another 5 or 6 hours. At any sort of realistic shop rate that would make the finished pegs exorbitantly expensive. Good thing I'm not a pro! :D

 

Turned Lightsaber
By: Carl Jacobson
November 28, 2014 · 14,979 views

I made this Star Wars Lightsaber! I turn it on the lathe, and did some inside out turning so the light would shine through. Christmas Ornament Playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Sponsors for the Christmas Ornament Challenge ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolworks.com/ Crabtree Tools http://toolsbycrabtree.com/ ChefwareKits https://www.chefwarekits.com/?tracking carl Nova Infinity System http://www.novainfinitychuck.com/landing.html MICROJIG http://www.microjig.com/ - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Woodturning a rainbow
By: Custom Chris
November 28, 2014 · 11,804 views

Rainbow poplar bowl. Thanks to a great subscriber.. For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Making a wooden sword on a lathe :-). SethsstickS.com
By: Seth Bourne
November 22, 2014 · 4,079 views

Making a wooden sword on a lathe :-). I sell my stuff affordably at SethsstickS.com

 

King V Update 11 07 14
By: Paul Crabtree
November 07, 2014 · 180 views

How to look at curing a vase for the Polyurethane finish. In general checking to see how the piece is coming along. A look at an up coming project.

 

drechseln eines beleuchteten Schaltknaufes [HD]
By: Tiroler Drechsler
November 06, 2014 · 35,359 views

Heute drechsle ich für mein Auto einen beleuchteten Schaltknauf. Die eingebaute LED beleuchtet einen Tiroler Adler, sodass man ihn gut bei Nachtfahrten im dunklen sieht. Das Eichenholz wurde mit Salmiac geräuchert um es noch dunkler zu machen. ________________________________________ Die Musik ist von KsTBeats: https://www.youtube.com/user/KsTBeats ________________________________________ Kamera: Sony Xperia Go Have fun! \( _ )

 

#51 Wooden Turned Cutting Board
By: Stephen Ogle
November 04, 2014 · 9,440 views

My methods for making laminated turned cutting boards for giving as gifts for Christmas and Birthdays. Show your support for Larry at The Tiny Trailer Workshop https://www.youtube.com/user/TinyTrailerWorkshop

 

Cutting Board Follow-up
By: Carl Jacobson
November 03, 2014 · 7,520 views

Follow-up on the cutting boards I made last Friday. ChefwareKits https://www.chefwarekits.com/?tracking carl Inter coupon code carlj for a 10% discount. http://toolsbycrabtree.com/ Carter and son tools http://carterandsontoolworks.com/ Ways you can support the show ChefwareKits https://www.chefwarekits.com/?tracking carl Etsy https://www.etsy.com/shop/Thewoodshoptv?ref hdr_shop_menu Thank you for supporting free woodworking videos https://www.paypal.com/cgi-bin/webscr?cmd _s-xclick&hosted_button_id 7MQRX83KCLJBA Alan Stratton https://www.youtube.co

 

medium
By: John C Lucas Woodturner
November 02, 2014 · 1,016 views

Turning A Rosette

 

Myrtle wood cutting boards
By: Carl Jacobson
October 31, 2014 · 29,104 views

These are easy to make I made two Myrtlewood cutting boards. to sell on my Etsy store. Etsy https://www.etsy.com/shop/Thewoodshoptv Rock-n H Woodshop https://www.youtube.com/watch?v Q389kTdSdmo&list UUG-NTs65U9JBv-KWK56acQw&index 3 I upload a new project video every Friday, and I'm live Monday on YT and Friday on Twitch. Check out my Twitch channel. https://www.twitch.tv/carljacobson I DO THIS FOR A LIVING, THANK YOU FOR YOUR SUPPORT! https://www.patreon.com/CarlJacobson YOU CAN ALSO FIND ME HERE: https://www.ets

 

Woodturning ???????
By: Custom Chris
October 30, 2014 · 621 views

:) For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Wine Bottle Experiment. (sawdust rd. woodshop)
By: Johnny Boudreau
October 26, 2014 · 580 views

Inspired by the Drunken Woodworker's video of the wine box. I though, 'hey, I think could make the bottle!'... The following video is the result. Thanks for watching, please Like, Comment, Share and Subscribe. Johnny Drunken Woodworker: https://www.youtube.com/channel/UCtaykeSsGhtn2o2BsPm-rsw music by Rusty Guitard: https://www.youtube.com/channel/UCdI608okmTH4hkw3b30MBsQ

 

Bead Tumbler - (Scrap Bin Challenge)
By: RJBWoodTurner
October 17, 2014 · 6,109 views

I wanted to enter the scrap bin challenge that Peter Brown, April Wilkerson, and Steve Carmichael proposed for Friday October 17th 2014. I began this project in full anticipation of entering along with all the other great projects everyone came up with. My lathe ended up burning up and I could not finish the project so I didn't enter the challenge. If it wasn't for the lathe issue, I feel like this would have worked so I wanted to finish the video and post it just in case there was anyone else out there wanting to give it a try. Even though I did not enter the challenge, I still want to p

 

Mensch Ärger Dich Nicht - The Plugs
By: PeteTGIF
October 16, 2014 · 534 views

Today you'll see how I made the plugs for the gaming board I'm still making for my mother. ------- Although she said, she likes the board, she told me, that it is for no use to her. This made me sad and think about my own 'value' in this world again. Sometimes it doesn't take much to get me back into my own isolation, where none can hurt me. -------- Never the less as this channel is about my woodworking fighting my depression, I think I should start to release the part of the build which made me miss my deadline. For the board I had to make 72 face grain plugs, each with a slight different di

 

Zombie Billy Club (sawdust rd. woodshop)
By: Johnny Boudreau
October 06, 2014 · 358 views

Disclaimer: I do not endorse violence, this item is not intended for use on humans or animals except If they return from the dead! Enjoy the New Season of Walking Dead. Thanks For Watching. Johnny Music by Rusty Guitard: https://www.youtube.com/channel/UCdI608okmTH4hkw3b30MBsQ

 

Coat/Apron Rack
By: Carl Jacobson
September 26, 2014 · 8,191 views

I made this apron rack, out of some wood I found at Goodwill. Ways you can support the show ChefwareKits https://www.chefwarekits.com/?tracking carl Etsy https://www.etsy.com/shop/Thewoodshoptv?ref hdr_shop_menu Thank you for supporting free woodworking videos https://www.paypal.com/cgi-bin/webscr?cmd _s-xclick&hosted_button_id 7MQRX83KCLJBA Harry's Woodchuckers https://www.facebook.com/groups/harri.woodchuckers/ My Q&A Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Septarian nodule
By: Mauro il tornitore
September 26, 2014 · 789 views

A wooden base for a septarian nodule on the lathe

 

Woodturning For Pure Art
By: As Wood Turns
September 25, 2014 · 3,872 views

http://www.AsWoodTurns.com This piece is not functional. It is only for viewing as art. But art is useful in its own way. It challenges the mind and pleases the eye. This is made from walnut using segmented woodturning. It is fromed 76 segments with 8 more segments used as temporary support. It is finished with sanding sealer and wax. This piece is a challenge to create. Since it is fragile, I will not be letting my grandchildren play with it. They'll have to play with other turnings. :) Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Wood Turning Walnut Coasters part II
By: Turning Round
September 23, 2014 · 1,204 views

In this video I shows turning another Walnut Coaster. I have turned 3 or 4 more and learned some tricks to make the process faster and easier. I also try to put some designs on the bottom and have a hard time matching the pattern.

 

Turning a Walnut Coaster on a wood Lathe
By: Turning Round
September 23, 2014 · 3,184 views

In this video I explore a few way to turn a coaster out of some figured Walnut pieces I had in the shop. I admit this is a bit of a slow video but I show more turning and options, and I tell a few funny jokes.

 

Woodturning Is For The Birds
By: As Wood Turns
September 18, 2014 · 10,849 views

http://www.AsWoodTurns.com I turned these two birds to answer the challenge by my local woodturning club. The club often challenges its members to bring in a challenge turning after a presentation on the same topic. Last month, Kathleen Duncan demonstrated turning wood birds. Hence the challenge topic. These birds are about 3 inches long turned from walnut and elm and finished with shellac. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

duck pin
By: Jacques Fortin
September 12, 2014 · 442 views

duck pin hand made

 

Flat Bottle Experiment (sawdust rd. woodshop)
By: Johnny Boudreau
September 08, 2014 · 255 views

This is an idea I had a while ago and never tried, I know it's not really much of an experiment, but It was a fun project none the less. I started with the cut off of the segmented piece I had left over from last weeks video. Cut it in two and glued another piece of mahogany between them. Turning proved to be quite the practice for ghost turning, being careful for catches and such. I had to sand the flat spots by hand, it also helped to blend the flats with the rounds giving the bottle a more natural flow without the sharp edges.I parted the tenant on the band saw and filled the bottom edge

 

Cigar Case
By: Carl Jacobson
September 05, 2014 · 16,798 views

I turned a Cigar case out of Zebra wood, and Recycled Automotive Paint. Ways you can support the show My Q&A Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

TGIF PlumWoodChallenge EP#2 - Organizer
By: PeteTGIF
September 05, 2014 · 458 views

Second and final part of my PlumWoodChallenge. I made from the two boards and one of the turning blanks this beautiful Desktop Organizer. The box which will hold some business cards has a consistent grain-flow all around its outside. The challenge for me was to make a project out of two pieces of fire wood, including a board, something not turned. I hope you enjoyed this challenge as much as I did. Please leave a comment, like and subscribe to my channel. Music Funkorama by Kevin McLeod, http://www.incompetech.com Lizenz Creative Commons 3.0 http://creativecommons.org/licenses/by/3.0/deed.de

 

The Blind Wood Turner - Episode 5
By: Blind Woodturner
August 30, 2014 · 610 views

In this episode, I turn a vampire stake with an 'American Walnut' wood stain finish. I also show you some of my horror/Halloween props that I have made.

 

Woodturning Stump Craft
By: Custom Chris
August 28, 2014 · 237,711 views

Ye old bush stump makes the best looking bowl. Shine Juice link here: https://www.youtube.com/watch?v taJbBmcaAZQ&t 0s Here is the link to were it all started https://www.youtube.com/watch?v coWhSpAr_W4&list UUAGJQfE8Li0xYgt1q5TYuvA Come to my Etsy Store and get a hand made Aluminum Tool Handle https://www.etsy.com/shop/CustomChrisWoodworks For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Corzetti's stamps
By: Mauro il tornitore
August 23, 2014 · 2,398 views

This is my answer to the competition that Steve Ramsey from Woodworking for Mere Mortals and Alex Harris from ThisWoodwork started a few days ago.

 

The Blind Wood Turner - Episode 4
By: Blind Woodturner
August 23, 2014 · 1,128 views

In this episode, I turn a mahogany bullet for Mike Newman - the world's fastest blind man.

 

Woodturning Stump teaser
By: Custom Chris
August 21, 2014 · 20,525 views

This is a bush that had died many years ago but the stump did not rot Its bowl time! For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Multi Axis Bottle Experiment (sawdust rd woodshop)
By: Johnny Boudreau
August 17, 2014 · 242 views

I wanted to experiment with multi axis turning after seeing a video by Robbie the Woodturner. This is my Second attempt, the first I got my axis mixed up and it didn't look right. But I persisted and came out with this one. It started out as a 2' x 2' x 7' piece of Maple. Now, because I wanted the twist to appear only on the body part of the bottle, I started my piece twice the length of the body and made the top axis twice the width of the bottom one. I hope that makes sense :) Thanks to Robbie for the inspiration and instruction on how to achieve this. For more Information on how to make this multi axis turning please visit Robbie the Woodturner channel. He has lots of great videos on this subject explaining step by step how he does it. Make sure to check out the rest of his channel while you're there, lots of amazing stuff. https://www.youtube.com/channel/UC5JHV0RLR0uQLdWHVpmCe-g Music by Rusty Guitard https://www.youtube.com/channel/UCdI608okmTH4hkw3b30MBsQ

 

Wood Turning - A Wool Feeder
By: Mike Waldt
August 15, 2014 · 17,779 views

I make a simple wool/yarn feeder, which will pay out the wool as my wife needs it as she is knitting. Izzy Swan's Channel https://www.youtube.com/results?search_query izzy swan Guitar by Michael Berk https://www.youtube.com/user/mikeberk810

 

Woodturning Camera Battery Storage
By: Custom Chris
August 14, 2014 · 908 views

I needed a place for my batteries so I made a box and I brought you along for the ride ..

 

Cypress Wood Sink
By: John Williams
August 14, 2014 · 2,219 views

A bathroom vanity and sink made of cypress. Turned on my lathe.

 

Woodturning Guilty as Charged
By: Custom Chris
August 13, 2014 · 3,846 views

I fought the law and the law won.

 

X Segment Experiment (sawdust rd. woodshop)
By: Johnny Boudreau
August 13, 2014 · 271 views

Yup, its another bottle. While experimenting with segmentation I like the bottle, its simple quick and gives me a good idea of what I can accomplish with said segmentation. With that said it came out alright, my segmentation is off a little bit, I think my jig was not up to par. When I clamped down the work the wood wanted to lift off the the plywood. So next time a more sturdy jig is in order. The lamination is once again is a maple block with mahogany stripes. The first segment was cut at 60 deg. the next at 30 deg. Thanks for watching. Music by my good friend Rusty Guitard: https://www.youtube.com/channel/UCdI608okmTH4hkw3b30MBsQ/videos

 

Woodturning Cookie Jar Fail
By: Custom Chris
August 09, 2014 · 2,290 views

They can't all be winners

 

woodturning a lightbulb
By: Цветимир Иванов
August 02, 2014 · 1,119 views

Идеята не е моя, взех я от канала на WoodworkTV. Надявам се, че ще ви хареса.

 

woodturning cherry at 4x speed
By: mrRuben
July 30, 2014 · 89 views

cherry surprise. pictures of result coming soon (still a surprise gift).

 

Turning A Rosette
By: Gord Rock
July 26, 2014 · 3,581 views

Turning a Rosette to use in the corners at the top of doors in a house.

 

woodturning pestle with ring
By: Цветимир Иванов
July 23, 2014 · 3,239 views

 

Wood turning a ribbon bobbin from walnut wood
By: SJWoodworks
July 23, 2014 · 2,553 views

In this video, I turn a ribbon bobbin for craft ribbon storage from a walnut spindle. I'll use carbide lathe tools for roughing it out, but wait until you see what tool I use for the rest of the turning!

 

Wood Turning #83 Texted Scissors You Can Run With
By: The Tiny Trailer Workshop
July 19, 2014 · 610 views

Scissor Holders that can protect both you and your pockets! Sealed in their protective cases the scissors are also protected from the brutalities of everyday life. These can be made to fit any scissor, although my thought is that when the piece of wood you end up still weighs more than the scissors... it's probably not worth it! Kevin Krull https://www.youtube.com/channel/UC1d-iNgRP7xKYgOLDE4-fMw

 

Wood Turning #83 Scissors You Can Run With
By: The Tiny Trailer Workshop
July 19, 2014 · 1,188 views

Scissor Holders that can protect both you and your pockets! Sealed in their protective cases the scissors are also protected from the brutalities of everyday life. These can be made to fit any scissor, although my thought is that when the piece of wood you end up still weighs more than the scissors... it's probably not worth it! Kevin Krull https://www.youtube.com/channel/UC1d-iNgRP7xKYgOLDE4-fMw

 

2014.07.14 woodturning phone & Camera Tripod Adapter
By: 3earring3
July 14, 2014 · 71 views

 

Lautsprecherabdeckungen und Drehknöpfe drechseln (Segmente) [HD]
By: Tiroler Drechsler
July 13, 2014 · 2,210 views

Heute drechseln wir zwei Lautsprecherabdeckungen und zwei Drehknöpfe aus Mahagoniholz. Die großen ringe haben einen Innendurchmesser von 150mm und sind knapp 13mm breit. Und die Knöpfe sind im Durchmesser 30mm breit. ____________________________________ Website: http://tirolerdrechsler.jimdo.com/ camera: Sony Xperia Go Have fun! \( _ )

 

Pierced Spiral #2 (sawdust rd. woodshop)
By: Johnny Boudreau
July 06, 2014 · 253 views

Attempt #2 at the pierced spiral, worked perfectly.Made it out of the left over maple I had with the twist inlay video, As an attempt to make it stronger I only pierced 2 out of 4 spiral and made the others into a ribbon, it still gave the effect that I wanted. So all this said and done, I wanted to round over the bottom try to fade the spirals.FAILED! LOL, well I guess I do my best work with the lathe off. :) Thanks for Watching. Please Comment, Like and Subscribe. Music by Rusty Guitard: https://www.youtube.com/channel/UCdI608okmTH4hkw3b30MBsQ/videos

 

Woodturning a Purse Box in 3 minutes
By: Walter Wager
July 02, 2014 · 1,724 views

Steps in making a tubular box that a woman might use to keep ear rings or other purse items in that she doesn't want loose in her purse.

 

The Twist Inlay Experiment (sawdust rd. woodshop)
By: Johnny Boudreau
July 02, 2014 · 302 views

Maple bottle with Mahogany inlay. I wanted to try the twisted inlay that OzWorkshop had posted a while ago. Didn't get it as perfect as his, but good enough for my first attempt. I might try doing the lines a little fatter next time tho, get a less subtle look. Thanks for watching. OzWorkshop : A twisted design pen http://youtu.be/d4RuZp97w3Q Rusty Guitar: https://www.youtube.com/channel/UCdI608okmTH4hkw3b30MBsQ/videos

 

Wii Steering Wheel
By: Carl Jacobson
June 27, 2014 · 16,715 views

Wii steering wheel ChefwareKits https://www.chefwarekits.com/?tracking carl Mike Waldt https://www.youtube.com/user/TheCymruBoy/featured My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

My First Woodturning Pieces
By: Custom Chris
June 27, 2014 · 547 views

Here are some of the first turnings I did on my 1950's Craftsman lathe More to come I hope summer day Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0

 

Wood Turning #78 Texted Scotch Broom
By: The Tiny Trailer Workshop
June 22, 2014 · 692 views

I have a little adventure for you! I started to make a top or two... and then decided that wasn't what this wood was calling for! A very interesting wood is this Scotch Broom! And why is it that this texted video is 4 seconds shorter than the non texted one? Thanks for watching Larry

 

Wood Turning #78 Scotch Broom
By: The Tiny Trailer Workshop
June 22, 2014 · 1,123 views

I have a little adventure for you! I started to make a top or two... and then decided that wasn't what this wood was calling for! A very interesting wood is this Scotch Broom! Thanks for watching Larry

 

Skill Builder - Massage Pin
By: PeteTGIF
June 19, 2014 · 931 views

Every wood turner needs a small project to act as a skill builder / exercise piece. My main lack is in the use of my spindle gouge. Inspired by Guy Bradbury his Foot Massager http://youtu.be/VDCmxQ1gSXY became my favourite skill building project. I take you through the whole process of turning using my roughing gouge, skew chissel, parting tool and the spindle gouge. This cheap piece made a couple of times isn't wasted wood at all. I use them as gifts. Some of you might sell their pieces at a farmers market, there they might act as a teaser to get customers to your booth because you might sell them pretty cheap. Music Funkorama by Kevin McLeod, http://www.incompetech.com Lizenz Creative Commons 3.0 http://creativecommons.org/licenses/by/3.0/deed.de

 

woodturning
By: Цветимир Иванов
June 13, 2014 · 419 views

 

woodturning
By: Цветимир Иванов
June 11, 2014 · 577 views

 

WoodTurning Birdzzz...
By: Macoy de Freitas Ribeker
June 10, 2014 · 533 views

 

Woodturning: Billy Club
By: Roundabout Woodworks
June 09, 2014 · 11,336 views

I turn a billy club.

 

Mole ALERT - The Molehill as Display for a Golf Ball
By: PeteTGIF
June 07, 2014 · 448 views

Display for a golf ball with customized imprint. Made out of beech. Motörhead rules! In different sizes this stand can be used as well for other balls like Baseballs. Music Funkorama and Pump by Kevin McLeod, http://www.incompetech.com Lizenz Creative Commons 3.0 http://creativecommons.org/licenses/by/3.0/deed.de Photo of the mole by Stefan Diam 'Maulwurf (Talpa)' Licence Creative Commons BY-SA 3.0 http://creativecommons.org/licenses/by-sa/3.0

 

WoodTurNingWood
By: Adam Woodturner
June 04, 2014 · 112 views

WoodTurNingWood - Captured Live on Ustream at http://www.ustream.tv/channel/woodturningwood

 

Pierced Spiral ( sawdust rd. woodshop)
By: Johnny Boudreau
June 04, 2014 · 786 views

Here is an experiment to see how to make a pierced spiral. Attempt failed! OK, I knew it would fail, since it's made out of soft wood, just an old block of red cedar I had laying around... But perfect for a test piece. Thanks for watching.

 

WoodTurning Wood Bird
By: Macoy de Freitas Ribeker
June 03, 2014 · 1,512 views

 

End Grain Cutting Board
By: Carl Jacobson
May 30, 2014 · 96,480 views

In this video I made a end grain cutting board out of padauk, Walnut, and Maple. I inlayed disks I turned on the lathe. If you make this project I'd really like to see it, you can always share your project on my website. Robust Lathe: http://thewoodshop.tv/robust-lathe/ Roughing Gouge: http://amzn.to/2j4tKyV Jacobs Chuck: http://amzn.to/2y58YSE Forstner bit: http://amzn.to/2zjXnlQ Howard Finish: http://amzn.to/2h6sOWz Sandpaper: http://amzn.to/2y3oZbB DA sander: http://amzn.to/2zycaup I upload a new project video every Friday. Thank you for supporting free woodworking

 

# 227 A bead thingy
By: Cap'n Eddie Castelin
May 27, 2014 · 6,966 views

This video is about making beads with a simple jig

 

Wood Turning #74 Texted 2x4 Entry
By: The Tiny Trailer Workshop
May 23, 2014 · 3,053 views

My understanding of truth... trees are round... 2x4s are not The build of this project was one that most certainly have gone over 10 minutes if not for the competition guidelines! And then it wasn't till I was halfway through the editing before I realised the truth and that changed everything!! All the hours of making sure that this looked just right when you looked at it from over there... I think I was probably around 18 minutes by then!! It then became a challenge to be able to make it as short as possible and yet show enough of the build to understand where it came from. There are still

 

Wood Turning #74 2x4 Entry
By: The Tiny Trailer Workshop
May 23, 2014 · 32,599 views

My understanding of truth... trees are round... 2x4s are not The build of this project was one that most certainly have gone over 10 minutes if not for the competition guidelines! And then it wasn't till I was halfway through the editing before I realised the truth and that changed everything!! All the hours of making sure that this looked just right when you looked at it from over there... I think I was probably around 18 minutes by then!! It then became a challenge to be able to make it as short as possible and yet show enough of the build to understand where it came from. There are still

 

# 225 A decorative Disc
By: Cap'n Eddie Castelin
May 15, 2014 · 14,511 views

This video is about turning a decorative Disc. This is the first part of a two part project. I'll finish when I find the gold leaf products I need.

 

Magic Hammer ----Thread Chasing with Sam Angelo
By: WYOMINGWOODTURNER
May 10, 2014 · 11,355 views

Sam Angelo makes a small, wooden Victorian hammer with threaded fitment. Inspired by Bill Jones' book, 'Notes from the Turning Shop'

 

Wood Turning Cribbage Board
By: Carl Jacobson
May 09, 2014 · 15,553 views

ChefwareKits https://www.chefwarekits.com/?tracking carl My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. New template for turning Cribbage Boards. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Woodturning With Naked Turner Honey Do Drawer Pull
By: Erik Anderson
May 05, 2014 · 1,698 views

woodturning

 

#97 Amplificador acustico para Iphone - Iphone acoustic amplifier
By: Miguel Sanchez
May 05, 2014 · 61,521 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Un proyecto simpatico para aumentar el sonido de vuestros moviles, o al menos de los iphone. Espero que os guste. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

My Movie 2
By: Цветимир Иванов
May 03, 2014 · 199 views

 

Woodturning - Silver Maple Trumpet Shape
By: Kevin Krull
May 02, 2014 · 3,274 views

Another great shape to turn from green wood - the trumpet shape! This piece was turned from Silver Maple, powered dried, and finished with Danish Oil Finish.

 

#94 Calendario perpetuo de escritorio - Perpetual desk calendar
By: Miguel Sanchez
April 28, 2014 · 75,862 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Un pequeño proyecto para la feria de artesania, y entramos un poco en bricolaje, espero que os guste. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Wooden Thingy ?
By: Carl Jacobson
April 25, 2014 · 19,364 views

ChefwareKits https://www.chefwarekits.com/?tracking carl My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Wood Turning #65 Picture Hanger
By: The Tiny Trailer Workshop
April 19, 2014 · 1,032 views

Taking a piece of Cedar that had been turned seven years ago into a barber pole and turning it into a barber pole! This is a way of hanging a picture that keeps it from curling up at the corners like would happen if you hung something tied a string to both corners... The weight of the picture itself would force to bend it! This way the string hangs straight down while the pole absorbs the force! Thanks for watching Larry

 

Wood Turning #64 A Wrench
By: The Tiny Trailer Workshop
April 15, 2014 · 1,759 views

This was filmed before I saw all the bookend videos and figured out what it was all about... Well done guys! I would imagine that there will come a time when I find that this is too tall to fit under the work... but when that happens I can always take it off! The wrench itself I just cut off on the grinder... I don't expect too much excessive force to be used on it at any time... so the glue should hold just fine.

 

Bruco multilegno - Many-wood caterpillar
By: Mauro il tornitore
April 05, 2014 · 505 views

Realizzazione di un bruco di legno di olivo, ciliegio, wengè, frassino, pero, bosso. How I realize a wooden caterpillar (olive-tree, cherry, wengè, ash, pear-wood, boxwood.

 

Turning maple bottle (sawdust rd woodshop)
By: Johnny Boudreau
March 30, 2014 · 275 views

Turning a Maple bottle with Mahogany stripes and a cap.

 

Woodturning Collapsible Baton For Musicians
By: As Wood Turns
March 28, 2014 · 4,354 views

http://www.AsWoodTurns.com I leveraged my experience with magic wands to make this collapsible music baton for my daughter in law. This baton takes it to the next level. A baton need to be the same length as the distance from the director's inner elbow to the director's fingertips. For her, this is 14.5 inches. I also made this baton collapsible so it can be put in a large bag or purse. It's interesting and fulfilling to leverage other projects in a new way. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready.

 

Cryptex Woodturning Video
By: Gord Rock
March 25, 2014 · 4,076 views

A video to describe a cryptex, explain how it works and advise where to get information on how to build one .

 

Wood Turning #56 Tripod Cap
By: The Tiny Trailer Workshop
March 14, 2014 · 960 views

Birdseye Maple Burl cap for the end of a bar on my tripod. I thought I had lost the one that was there, so I planned it all out and got ready. The hole that it fits into is tapered which is why the post in addition to having a hole has a kerf cut into it with the bandsaw... that makes it so it can squeeze together and for an even tighter fit. At least that is why I assume that they did it?! Then I found the old one!! Ah Well!! It didn't take too long and it makes the tripod look 'Way Cool'. Thanks for watching Larryh

 

How to turn a Scottish Targe
By: Robbiethewoodturner
March 13, 2014 · 20,899 views

Hi all here is a demonstration video on how i made a Scottish Targe check out my web blog for more projects http://robbiethewoodturner.net/ This video was produced and made by Robbie power Copyright All Rights Reserved

 

Woodturning-Oar Pins for Isle of Mull Coastal Rowing
By: Peter Macgregor
March 10, 2014 · 418 views

A quick video showing the process of creating the oar pins for the Isle of Mull Coastal Rowings community skiff. Facebook-https://www.facebook.com/isleofmullcoastalrowing

 

Move Over Kindle - Here's A Real Page Holder
By: As Wood Turns
March 07, 2014 · 5,359 views

http://www.AsWoodTurns.com My daughter sent me a pin from Pinterest for this little doodad. I'm not sure of its official name. But, it does a great job of holding the pages open while reading a book. Despite Kindle et al, real paper books are still with us. It's a bit irritating at times to have to use both hands to hold the pages. This one is walnut and finished with beeswax and mineral oil. The challenge is to drill and finish the hole from both sides, then change the axis finish the remainder of the piece. Enjoy! Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready.

 

Bastone al tornio
By: Mauro il tornitore
March 03, 2014 · 9,995 views

Descrizione passo passo di come ho realizzato un bastone di frassino al tornio. Step by step how I made an ash walking stick in the lathe.

 

#79 Estuche para gafas - Casing for glasses
By: Miguel Sanchez
March 03, 2014 · 20,656 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Otro proyecto sencillito para quitar de enmedio las gafas de vista que cada vez veo menos. Espero que os guste. Saludos http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Woodturning-Foot Roller (Massager)
By: Peter Matthew
March 03, 2014 · 1,034 views

Please comment, rate, subscribe, and like for more woodturning videos. -Peter

 

# 217 Turned four sided jar
By: Cap'n Eddie Castelin
February 28, 2014 · 27,184 views

Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

## Wood turning Demonstration of a Sauracker Shell
By: Robbiethewoodturner
February 26, 2014 · 136,595 views

# Sauracker Shell,You can see a photo tutorial of the jig I made for it.See how I layout the blank on my web blog.Click here http://robbiethewoodturner.net/category/sauracker-shell/ just click on the photos to enlarge theme Copyright All Rights Reserved

 

Wood Turning #51 Spilikins
By: The Tiny Trailer Workshop
February 25, 2014 · 863 views

Spilikins are an everyday item... more commonly known as Crib Pegs! I am somewhat displeased with this video as the focus is both too far and too near the pieces! But I think it is clear enough to be able to tell what it is that I am doing! Something a little different here is the White Tail Deer Antler. Interesting to turn but you are limited as to how big you can turn. The center is very spongy and soft which makes it unstable to use on its own. But the edges and the points make some really nice projects! The Ebony is a very brittle wood and I have seen pieces twist apart on me... and you can see that one of the pegs is a little thin on one end! It has been interesting to work on pieces this small... it certainly changes how you operate! Well thank you for watching Larry Tyler Carson and Adam Dobres provide music.

 

Woodturning a star
By: mats persson
February 22, 2014 · 4,473 views

Turning a wood star and learning to use the bowl gauge.I got the gauge some time ago and i need to learn how to use it....

 

Ear Bud Spool
By: Chris Pine
February 15, 2014 · 2,114 views

Simple yet useful project. Once again I go to the lathe for a time of therapy! Please join me for this simple project of a Ear buds spool. Please Subscribe to My Channel! http://www.youtube.com/user/TheChrisPineWorkshop Facebook: https://www.facebook.com/pages/I-Wish-I-was-Home-Productions/176321852397752 Keek: https://www.keek.com/cpine

 

Turning a wood heart
By: mats persson
February 15, 2014 · 8,849 views

Turned a wood heart for valetines day..

 

How To Build A Cryptex
By: Raymond Overman - Woodturning
February 10, 2014 · 2,809 views

 

# 213 duck captain
By: Cap'n Eddie Castelin
February 07, 2014 · 19,359 views

I turn a duck call and show you how to do so even if you don't get all the parts required. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

Woodturning With Naked Turner Empartment or Herb Container 1
By: Erik Anderson
January 26, 2014 · 785 views

 

Woodturning With Naked Turner Claro Walnut Matches Case
By: Erik Anderson
January 26, 2014 · 623 views

 

Wood Turning With Naked Turner Sexy Saxonet
By: Erik Anderson
January 26, 2014 · 1,275 views

 

Wood Turning Gear Shift
By: Carl Jacobson
January 24, 2014 · 35,115 views

Recycled Automotive Paint I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.com/ ChefwareKits https://www.chefwarekits.com/?tracking carl Website http://www.thewoodshop.tv/ Google https://plus.google.com/113199904565893027390#113199904565893027390/posts Facebook https://www.facebook.com/pages/The-WoodshopTV/161892940583516?ref hl W

 

Beads
By: Ian Robbo Robertson
January 20, 2014 · 703 views

A short video on the various ways to form small beads brought about because of a discussion here: http://www.woodworkforums.com/f8/how-do-very-fine-beads-pens-chess-pieces-181026

 

woodturning projects
By: Jordan Bowmar
January 06, 2014 · 261 views

Hopefully these projects help you. Please like and subscribe If you want too see your projects in the next video send me your pictures and Your name and a little bit about it. woodturner4life@gmail.com Please visit my Website www.UniqueCreations.vpweb.co.nz

 

# 209 Variations on a theme
By: Cap'n Eddie Castelin
January 05, 2014 · 5,762 views

Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

Woodturning a hollow Torus
By: Jtcturning
January 03, 2014 · 3,602 views

My process of turning a hollow Torus. Material: Oak Burl Artist: Jason Clark December 2013

 

Pomander Part 4
By: Keith Worswick
January 03, 2014 · 333 views

This video is about making a Pomander

 

Pomander Part 3
By: Keith Worswick
January 03, 2014 · 221 views

This video is about making a Pomander

 

Pomander Part 2
By: Keith Worswick
January 03, 2014 · 305 views

This video is about making a Pomander

 

#40 Colossus Stand
By: The Tiny Trailer Workshop
December 31, 2013 · 611 views

A Figurine of Colossus needed a stand... and a piece of Birdseye Maple Burl looked like just the right piece! Tyler Carson supplied the music. www.tylercarsonmusic.com

 

Turning Air in Slow Motion
By: OzWorkshop
December 28, 2013 · 1,910 views

Careful when turning ait ....:o)#

 

Coat Hanger Dots
By: Cip's Wood Chips
December 20, 2013 · 2,643 views

These Hanger Dots were on one of my daughter's Christmas gifts. Believe it or not they sell for 150. It cost a lot less if you make them yourself. For clear finishes use an attractive hardwood. For painted finishes use poplar or pine.

 

Torno Job - video 2
By: Joabe Bomfim
December 15, 2013 · 65,488 views

Torno artesanal, dotado de características profissionais de qualidade e precisão. Feito conforme o meu método de fazer um torno para madeira, apresentado nos vídeos anteriores.

 

Woodturning With Naked Turner Claro Walnut Matches Case 1
By: Erik Anderson
December 14, 2013 · 221 views

 

Wood Turning With Naked Turner 8 5 Walnut
By: Erik Anderson
December 14, 2013 · 731 views

 

Woodturning-Spalted Beech Oddity
By: Kim Gowney
December 11, 2013 · 12,293 views

The finished item can be see using the link below. http://kimswoodart.blogspot.co.uk/2014/05/oddity.html What can you do with those odd little bits of wood that look so nice you are loathe to throw them away? Well here is an example of making the most of such a scrap. About 17 minutes in I get a nasty dig in, it doesn't look like much but it really grabbed and tore a chunk out of the timber. Once I have finished polishing the piece I will put some shots on the blog, you will know when that happens as I will then add a link to it below this text. Apologies for credit listing at the end, I forgot to remove it.

 

Woodturning With Naked Turner Empartment or Herb Container
By: Erik Anderson
December 01, 2013 · 2,549 views

Wood Turning

 

A Stack of Special Donuts For All The Big Ballgames
By: As Wood Turns
November 29, 2013 · 2,803 views

http://www.AsWoodTurns.com Phillip from San Antonio sent me a chunk of mesquite. I've puzzled over what to make of it. Then I realized that it is playoff and bowl game season. I need refreshments for all the big games. How about a donut. This donut is hollow to reduce its calorie content. I don't want my friends to have to go on a diet to lose weight. Yet, they need to enjoy my delicious donut. The only thing I can't figure out is how to add tasty frosting and sprinkles. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

turning cars
By: OzWorkshop
November 28, 2013 · 1,543 views

A quick turning project for small scraps.

 

IMG 0862
By: Barbara Dill
November 24, 2013 · 2,829 views

This is a video Shelly took using my I phone and taking it from my right shoulder. I really like this orientation ....it is what the turner is seeing. I usually hate the ways the cameras are oriented at meetings and symposiums. I have set up my Arlo Guthrie harmonica neck holder to hold my iPhone in hopes of documenting some of the turnings I do by myself. The outcomes are mixed at present.

 

A Butternut Squash Recipe With A Special Turn
By: As Wood Turns
November 22, 2013 · 6,015 views

http://www.AsWoodTurns.com I have a very different recipe for butternut squash. 1. Select a favorite wood in dimensional lumber form. (I used cherry) 2. Decide the maximum diameter for your squash. (Mine is 4 inches) 3. Calculate a segment length as Length Diameter x pi / segments. (4 x 3.14159 / 8 1.57) 4. Saw segments to length determined in step 3 with 22.5 degree angles. These will be trapezoids. The long side is the length you calculated. 5. Glue pairs of segments together; clamp for 5-10 minutes and let cure for at least 1 hour. 6. Glue these pairs into half rings using an band clamp

 

Wine rack and update
By: OzWorkshop
November 22, 2013 · 762 views

First project after enforced layoff. Is it a bottle or a wine bottle holder?

 

Woodturning With Naked Turner Claro Walnut Matches Case
By: Erik Anderson
November 16, 2013 · 1,172 views

Woodturning

 

Wood Turning - Wooden Drawer Pull
By: 101smallface
November 07, 2013 · 3,112 views

Turning a wooden drawer pull out of pine. music-Kevin MacLeod

 

#25 Bowler Turned Derby
By: The Tiny Trailer Workshop
November 05, 2013 · 487 views

A turned Arbutus Derby is the result of my attempt at a Bowler hat. I quite enjoyed this project and I would imagine that I will do more of them in the future. I attempted a stand for it as well... also out of Arbutus but I am afraid that one has split quite severely... We'll just have to see where the cracking stops. I am happy to say that the Derby, while warping a little... just to give it that broken in appearance... the cracks that were there when it was turned are the only ones that have appeared and they have stayed the same size as they were!!! Thanks for watching Larry and if you haven't already ... Don't forget to Subscribe!!! Carl Jacobson's video about turning a witch's hat. http://www.youtube.com/watch?v 0AWGSDGcbco

 

# 202 Lathezilla Revisited
By: Cap'n Eddie Castelin
November 02, 2013 · 12,486 views

I make a nice lid on Lathezilla and show you the basics of ornamental turning. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

Woodturning A Halloween Witch's Broom
By: As Wood Turns
October 31, 2013 · 1,816 views

http://www.AsWoodTurns.com To complete a Halloween witch's accessories, a witch needs a high class broom. For the discriminating witch, we have a brand new broom turned by hand from locally harvested maple, finished with fine grit sandpaper (80 grit is a witch's favorite) and a touch of fine beeswax and eye of newt. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

#41 Bombonera para Yerai (resubido)
By: Miguel Sanchez
October 23, 2013 · 19,606 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Un regalo para un buen amigo en el dia de su cumpleaños. He tenido que editar muchisimo el video por que era demasiado largo, espero podais perdonar tantas partes aceleradas. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#38 Candil (resubido)
By: Miguel Sanchez
October 22, 2013 · 17,059 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez He decidido hacer una pieza algo especial para conservarla para mi como recuerdo del dia en que alcanzamos los 1000 suscriptores, espero que os guste. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

#60 Pajaro descentrado - off center bird
By: Miguel Sanchez
October 14, 2013 · 19,822 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Vamos adentrandonos un poco mas en el tema de los descentrados, esta vez un pajaro, (o algo parecido :-) Espero que os guste. Saludos. Aqui teneis el canal de Laurent: https://www.youtube.com/channel/UCVulp2F4kWioRrCyHhrqllw http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Wood Turning Camera Crane for the shop
By: Carl Jacobson
October 11, 2013 · 11,004 views

In this video I made a camera crane for my new shop. All the hardware can be found at the home store. Cip Mindez camera crane video http://www.youtube.com/watch?v Cu3S12MGu8E I upload a new project video every Friday, and I'm live Monday on YT and Friday on Twitch. Check out my Twitch channel. https://www.twitch.tv/carljacobson I DO THIS FOR A LIVING, THANK YOU FOR YOUR SUPPORT! https://www.patreon.com/CarlJacobson YOU CAN ALSO FIND ME HERE: https://www.etsy.com/shop/Thewoodshoptv http://www.thewoodshop.tv/ ht

 

Woodturning Madera en Torno: Carmen De La Paz.
By: carmendelapaz
October 11, 2013 · 1,321 views

Woodturning with Carmen De La Paz

 

Woodturning A Handy Playing Card Holder
By: As Wood Turns
October 03, 2013 · 4,154 views

http://www.AsWoodTurns.com When my grandchildren come to visit, we often play games involving cards. But their hands are not big enough to hold their 'Hands'. In the past, I have cut slots in flat pieces of wood to hold cards. But still, they would like to hold the cards in their own hands. After seeing a plastic card holder in a store, I decided to make my own card holder from wood and turn it on my lathe. The card holder has 6 pieces: 2 - large walnut discs about 4 inches in diameter with a 1' hole. Each is tapered on the inner surface to allow cards to be easily inserted. I profiled the out

 

Woodturning - Drechseln in der Drechselstube Neckarsteinach.
By: Drechselstube
October 01, 2013 · 51,056 views

Besuchen Sie uns unter: www.drechselstube.de Video by Oliver Böhler

 

Indian Club
By: OzWorkshop
September 30, 2013 · 2,891 views

Turning an Indian Club. These are based on a 1900's exercise apparatus. This was a commission project.

 

WoodTurning - Create a pillar raining
By: Confusion Wood
September 26, 2013 · 1,564 views

WoodTurning - Create a pillar raining http://www.youtube.com/subscription_center?add_user ConfusionWood my channel: http://youtube.com/ConfusionWood

 

017 [EN] TGIF - Woodturners are the girls best friends
By: PeteTGIF
September 10, 2013 · 2,513 views

Inspired by the cover for a flash light from Carl Jacobson I decided to give one of the cheap perfume pumps a new home. In order not to detract from the beautiful figure of the wood I thought about this plain design. These perfume pumps make a great gift and if the girl of your heart prefers another fragrance (most of the times something far out of our budgets) you might refill the little glass tube. Another great idea would be to match the wood to the fragrance (oak for a heavy, earthy smell as rosewood longs for ....., lets guess) Have fun with this little project and don't forget to subscribe and leave a comment.

 

My (Eccentric) Leather Burnisher Doubles As A Vampire Stake
By: As Wood Turns
September 05, 2013 · 2,941 views

http://www.AsWoodTurns.com A viewer suggesting making a leather burnisher. I was excited at the suggestion as it is another idea to exercise the eccentric faceplate system. Many would leave the blade as a cone or flatten it on a sander. To me, however, it was an opportunity to take the eccentric faceplate system for a spin. This burnisher is made from cherry about 10 inches long; the bade is about 6 inches; the handle is about 4 inches. The handle contains four grooves to use to burnish edges of leather pieces: 1/8, 1/4, 3/8, and 1/2 inches. It is finished with beeswax and mineral oil. After t

 

ALFREDO LEISER'S HOBBY (UMI), diagonal woodturning, birch
By: alfredo leiser
September 03, 2013 · 399 views

תהליך החריטה מהתחלה ועד גמר הקערה-- complete performance from scrap to finished bowl טודה מקרב ליבי ל אוריאל בר-אבן על הוידאו שלימד אותי את הטכניקה הזאת. ד'ר אלפרדו לייסר (אומי)

 

ALFREDO LEISER'S HOBBY (UMI)-DIAGONAL WOODTURNING, BIRCH. I am turning for 2 years now
By: alfredo leiser
September 03, 2013 · 346 views

THANK'S to URIEL BAR-EVEN'S beautiful video tutorial, from wich i learned a lot

 

Woodturning With Naked Turner Plum Stem For Ceramic Pear
By: Erik Anderson
September 02, 2013 · 1,196 views

Wood and ceramics

 

Arte en Torno-Como construir apliques torneados para una superficie plana
By: Arte en Torno
September 01, 2013 · 4,566 views

Mediante este truco puedo fabricar un par de piezas exactamente iguales, esta ttécnica la aplicamos en piezas de cuaquier tamaño cuando deseamos poner un par de ellas sobre una superficie plana. Arte en Torno. No dude en escribirnos si tiene alguna inquietud.

 

# 185 Double Block Return
By: Cap'n Eddie Castelin
August 30, 2013 · 8,596 views

I really screwed up the finished piece and this video explains what I had to go through to fix the problem and save the piece. Better than the fireplace. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

fakereszt
By: demeterlaszlo55
August 28, 2013 · 3,730 views

A kereszt egy urna tetejére készült, mely 1 másik filmen látható.