Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Bowl Blanks Videos (97)

Sort by

Or click here to: Search All Videos


Monster Bowl Blanks ·
By: Keith's Woodwork
October 27, 2017 · 139 views

We cut some 30' bowl blank cross sections from a hard maple tree in the berkshires of Massachusetts. There is no distance I won't travel for some good wood! Special thanks to Olde Remington Farm for a great weekend and some amazing bowl blanks. Stay tuned for when I mount these on my nova galaxy 16-44 lathe and try and turn them. I hope they hold!

 

Producing Turning Blanks ·
By: PeteTGIF
October 22, 2017 · 550 views

How I cut thin logs into half in order to make my turning blanks. Safe way to hold thin logs. The sawhorse was made by Chris a while back and needed some minor modifications in order to receive hte support beams which hold the logs into place. Further processing will be done in my shop on my tiny bandsaw (100 mm / 4 inches capacity). Bigger logs will go on our chainsaw-carving table. ------------------------------------------------ Please leave a comment to show your support. ------------------------------------------------ ------------------------------------------------ You find me on Facebo

 

Preparing Wood Blanks to be Turned on the Lathe ·
By: RJBWoodTurner
October 06, 2017 · 2,004 views

This video discusses the procedure I go through to prepare a wood blank to be turned on the lathe. It has been designed to be a reference video for anyone needing to know how a blank is prepared for turning. Regards, Bob My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Worthless Wood Blank - Mesquite Burl & Liquid Diamond Resin ·
By: Lynn Lacey
August 25, 2017 · 2,200 views

In this video I turn a 'Worthless Wood' blank that RJB Woodturner (Bob) and I made with a piece of Mesquite Burl and Liquid Diamonds resin in his recent visit to my shop. You can see that video here https://youtu.be/OzjyaFKt3nk . Bob toof half of the casting and you can see His pen from that cast here. https://www.youtube.com/user/RJBWoodTurner Instagram; @LL_woodworks www.LL-Woodworks.net Facebook; https://www.facebook.com/LL-Woodworks-397970183658553/ Pen Making Playlist https://www.youtube.com/watch?v TO3P_otYxJE&list PLqhhB9PS87ya7CF3iNVel-Wjj6G7OQ0fh In My Shop; RZ Dust Mask: htt

 

Log to Turning Blanks ·
By: Mike Peace Woodturning
August 04, 2017 · 3,767 views

I explain some of the basics in cutting green wood logs into wood turning blanks. Preparing turning wood is an essential skill for wood turners since green wood frequently appears in log form. I upload a new woodturning tip every Wednesday and a woodturning tutorial video each and every Friday so Ya’ll come back, hear? You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

How To Prepare Bowl Blanks ·
By: Make Crazydays
July 25, 2017 · 451 views

When the bow is in the clouds, I will see it and remember the everlasting covenant between God and every living creature of all flesh that is on the earth. - Genesis 9:16 Blog Post: https://make.crazydays.org/2017/08/acquiring-and-preparing-bowl-blanks/ After storms quite often trees are blown down and just turned into firewood. Most people don't know what to do other than call a tree service, but this is an option I provide for folks. I'll try to get in an save large trunk sections or crotches to save the wood for bowl making and in return give the person who donated the wood the first bo

 

Blanks update ·
By: Bram the Wadesmill woodturner
July 11, 2017 · 280 views

Quick catch up https://www.youtube.com/watch?v JqveQSDp_hE Bmacs channel https://www.youtube.com/channel/UCSTl-BQomeXoJqevZ_MxpOw for Robs channel https://www.youtube.com/user/kasbarrow for Keiths channel https://www.youtube.com/channel/UCcM_SykaFqrxVnq52MjI6UA for Patlaps channel

 

Preparing Walnut Bowl Blanks # 87 ·
By: The Wood Whirler
June 28, 2017 · 7,316 views

Getting ready to turn a large walnut, so I had to cut some blanks. Here's how.

 

KCWT 2017 5 May Liam ONeill D2 ·
By: KCWoodturners1
May 18, 2017 · 603 views

Liam O'Neill slideshow and chainsaw woodturning video demonstration. At KC Woodturner Clubhouse on 5/8/2017.

 

Turning With A Chainsaw??!!! ·
By: RickTurns
May 10, 2017 · 2,070 views

I recently purchased a new electric chain saw, and in this video, I demonstrate it, review it, and replace the chain because I hit a chunk of metal embedded in a log.

 

Подготовка детали (Prepare the item for processing) ·
By: Аleksey Bek
May 07, 2017 · 493 views

Видео о том как подготовить деталь для дальнейшей обработки. Материал заготовки ясень. Video on how to prepare the item for further processing.

 

Brick Blank BLUNDER! ·
By: Lynn Lacey
May 06, 2017 · 900 views

I attempt to recreate a blank I made 10 years ago called my 'Brick Blank'. Made of maple. bloodwood, and black alumilite resin see what troubles I encountered in this effort. Instagram; @LL_woodworks www.LL-Woodworks.net Facebook; https://www.facebook.com/LL-Woodworks-397970183658553/ In My Shop; Transfer Punch Set http://amzn.to/2oyKQmj Letter Drill Bit Set: http://amzn.to/2pS4RWj Number Drill Bit Set: http://amzn.to/2pRZpCu Forstner Drill Bit Set: http://amzn.to/2oVxumL Ryobi 18v Drill http://amzn.to/2q3E4FP Ryobi 18v Palm Router; http://amzn.to/2p983Pp DeWalt Random Orbit Sander:

 

An Oak Bowl ·
By: RickTurns
May 02, 2017 · 2,129 views

This is a bowl turned from fresh oak. The wood has only been down 2-3 months, and therefore, warps during turning and finishing. The bowl is finished with a wiping varnish and then buffed with carnauba wax.

 

31 - Preparing Olivewood Logs for Bowl Blanks ·
By: Bill Rockwood
May 02, 2017 · 1,773 views

I recently received some substantial Olivewood log segments, which I process into turning blanks with my chainsaw and bandsaw.

 

Aluminum and Polyester Resin Bowl Woodturning Project ·
By: Carl Jacobson
April 28, 2017 · 1,344,721 views

Peter cast this resin, and aluminum bowl blank. Check out the link below to see how he did it. Polyester resin doesn't turn very well, but if you're going to try it carbide tools work best. Bowl casting video: https://www.youtube.com/watch?v ssaYktaIrTY&feature youtu.be Peter's Channel: https://www.youtube.com/user/kludge1977 Tools used in the video: Use RZCarl for 15% off your order RZ Mask https://rzmask.com/pages/woodworking/ Robust Lathe Small DA sander: https://woodturnerswonders.com/collections/random-orbital-sanders/products/random-orbital-sander-sample-package Abranet sand paper:

 

Making a blank holder for holding blanks you want held, ·
By: Chad Schimmel
April 08, 2017 · 1,848 views

I needed a better way to take pictures of blanks so I made a blank holder! MonoLoco Tys channel https://www.youtube.com/user/trmoser/videos For great pen blanks visit www.turnerswarehouse.com Be sure and subscribe for new videos every Friday. Here are the tools and equipment I use, I have included these amazon links because I get a commsion if these items are purchased. I only ask if you are going to buy them anyway please use these links and that will help the show and the shop. Thank you Jet 1221 lathe, http://amzn.to/2sUR5mF Jet 1015 lathe, a little cheaper price, http://amzn.to

 

Milling logs into bowl blanks using a Chainsaw: Sam Angelo the WYOMINGWOODTURNER ·
By: WYOMINGWOODTURNER
March 30, 2017 · 10,525 views

From a Log to a Completed Bowl (Series part 1) Sam demonstrates his process for 'turning' logs into bowl blanks using a chainsaw. This is Part 1 of a 4 part series that ends with completing a rough-turned burl bowl blank: Playlist Link: https://www.youtube.com/playlist?list PLL5-IWEcq6B-hymSlYZxdWTeVPTFRNe9Z Part I Milling a bowl from a log Part 2 Rough-turning a bowl Part 3 Natural edge bowl Part 4 Completing a rough-turned bowl *Chainsaws can be very dangerous. If you are not experienced with a chainsaw find someone who can instruct you: be very careful. Safety is YOUR responsibility.

 

Woodturning: Blank and new BandSaw ·
By: SG Art Turning
March 30, 2017 · 15,470 views

Email : simgadoury@gmail.com Patreon : https://www.patreon.com/sgartturning You Tube Channel : https://www.youtube.com/channel/UCKmU3_I2MD3843jJRIQjnMg Web Site : https://sg-art-turning.com Facebook : https://www.facebook.com/SGTurning

 

Milling a Bowl blank on the Bandsaw: woodturning with Sam Angelo ·
By: WYOMINGWOODTURNER
March 06, 2017 · 21,010 views

In response to a question, Sam demonstrates the operation of a cross-cut sled for milling a small log into a bowl blank. After the Russian olive blank is cut to length he splits the log on the bandsaw by standing it on end. Thanks Jodi for asking an important question.....

 

Making Platter Blanks with the McNaughton System ·
By: wortheffort
February 22, 2017 · 4,875 views

To complement yesterdays video on using the McNaughton Center Saver Coring System today we tried making platter blanks instead. ---------------------------------------------------------- You can support our channel by shopping and patronizing these sites: http://wortheffort.com http://wortheffort.com/store http://instagram.com/wortheffort_ww http://twitter.com/wortheffort_sg http://facebook.com/wortheffort http://patreon.com/wortheffort

 

woodturning, log to blanks ·
By: Woodslee Summercraft
February 16, 2017 · 3,373 views

one thing I love about woodturning is the ability to utilize resources that are dis-guarded, like an old tree that was cut down and left. This is a demonstration of my use of a chainsaw and bandsaw to prepare bowl blanks, pen blanks and spindle blanks. please follow all safety recomendations please visit my website http://www.woodsleesummercraft.ca/ music free from http://www.freemusicarchive.org/ https://creativecommons.org/licenses

 

Rough Turning Green Wood Into Bowl Blanks ·
By: 207 Made
January 23, 2017 · 210 views

https://www.facebook.com/207-Made-112917125483794

 

Kamikaze Oak Lathe Killer ·
By: Austringer Creations
January 16, 2017 · 485 views

This is why you should always ensure that your bowl blank is solid. The lathe was on the slowest speed setting and the stock was cutting good right up until it exploded. Fortunately I wasn't standing in the line of fire and was wearing a face shield even though the broken wood flew toward the wall behind my lathe. The damage to the lathe looks worse than it actually is; the force sheared the rolled pin holding the rod that secures the lathe head to the bed and should be a quick and easy repair. I think I'll stay away from spalted wood for a while, I do have much better blanks on hand but was intrigued by this piece of crotch oak that seemed to be fairly solid when I ripped it with my chainsaw. Not so much.

 

Preparing, blanks and a thank you ·
By: Bram the Wadesmill woodturner
December 22, 2016 · 2,174 views

Created with Wondershare Filmora music, brightly Brendans channel Bmac wood turning https://youtu.be/JqveQSDp_hE Yorkshire grit http://yorkshire-grit.com

 

Finding Center on a Log ·
By: PeteTGIF
December 15, 2016 · 966 views

This time I made a Jig to find center on a log for turning it into a bowl blank. Enjoy my video and leave a comment. After a year being away from producing videos on a regular basis I have to thank all my subscriber for staying with me. I'm trying to come back on a regular basis. I definately missed you and my shop. Sorry for my bad voice in this video, but I got a bad flu at the moment, this couldn't stop me from making the video. ------------------------------------------------ ------------------------------------------------ You find me on Facebook: https://www.facebook.com/TGIFWood My pri

 

Burl Wood Bowl Blanks – Where Do You Start? ·
By: WoodWorkers Guild Of America
December 02, 2016 · 10,694 views

One of the best parts of bowl turning is finding chunks of unusual wood that you can turn into amazing bowls. In this case, George was given a huge piece of red oak burl. In this video he explores the burl wood, and walks you through how he changes the huge chunk of wood into blanks for burl bowls. It’s all about processing the burl and converting it to what you need for your projects. For more of our woodworking videos, visit http://bit.ly/2dJOw28

 

07 - Logs into Bowl Blanks ·
By: Bill Rockwood
October 18, 2016 · 9,831 views

Processing some urban harvested lumber into bowl blanks.

 

Short Log Turning Blanks ·
By: Brian Havens
August 22, 2016 · 36,303 views

Ideally, a log should be cut the same length (or a little longer) as it is in diameter in order to get the largest form possible from the log. However, sometimes you get what you get, and that means you get a log that is cut shorter than the diameter of the log. Not to fret; there are a couple of options for cutting short logs into turning blanks.

 

Dealing with Mold in Wooden Bowls: woodturning with Sam Angelo ·
By: WYOMINGWOODTURNER
August 18, 2016 · 5,265 views

In this video Sam addresses the issue of mold growth in rough-turned bowls. He covers: 1) how mold grows on wood and 2) how to get rid of it. An important video. Please share.

 

Woodturning - The making of 130 Bowlblanks ·
By: Ginger Wood
June 13, 2016 · 11,100 views

This timelapse video shows the process behind bowl blanks. In this case it took me about 18 hours from scratch to make 130 bowlblanks that will be turned into wooden bowls once the wood is dry (and 60 pieces of square timber). Don't worry, the offcuts will be used to heat my workshop during the winter months and the shavings will be used to heat our house or to make a bed for our animals.

 

Electric Chainsaw + Log = Wood Turning Blanks ·
By: WoodWorkers Guild Of America
April 07, 2016 · 9,401 views

Bowl turners are typically scroungers. They’re constantly on the lookout for cool looking logs they can turn into bowls. Once you’ve got the log, how do you handle it to easily and safely turn it into a wood turning blank? Here’s one approach. For more of our woodworking videos, visit http://bit.ly/2dJOw28

 

Mounting a faceplate on a blank. ·
By: FMH Woodturning
April 06, 2016 · 249 views

In this short video I will be attaching a four inch face-plate to a segmented blank which I will turn in a later video.

 

Mounting a blank between centres ·
By: FMH Woodturning
April 04, 2016 · 74 views

A short instructional video showing you how to mount a piece of timber between the two centres of a lathe.

 

Fruit Bowl in Curly Ambrosia Maple, Analyzing the Blank ·
By: Daniel Vilarino
April 01, 2016 · 1,337 views

Hola/Hi! Este video está en Inglés, si prefieres verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/4sVRee5grt4 ***This video is in English*** En este video analizo las características de un trozo de arce rizado para tratar de sacar ventaja de su forma y los detalles que puedan lucir bien en la pieza final y luego realizo el torneado del frutero con la pieza seleccionada. ***In this video, I analyze the characteristics of a piece of ambrosia curly maple to take advantage of its shape and its features so that they will appear in the final piece, and then I turn

 

How to Cut Up Logs Into Bowl Blanks, Also How To Dry Them ·
By: The Russian Woodworker
March 07, 2016 · 16,580 views

In this video I show you the basics that you need to get to start cutting your own bowl blanks. I tried to explain it as best as possible so hopefully it helps.

 

A Jig to Cut Corners Off of a Turning Blank ·
By: Dave's Woodshop
January 31, 2016 · 1,277 views

This video demonstrates how to build a jig that enables you to cut off the corners of a woodturning blank and still retain it's balance. Removing the corners before rounding the stock speeds up the rounding off process, reduces the need to sharpen cutting tools as often, and reduces the amount of waste in the form of shavings that must be cleaned up.

 

Wood Blank Preparation ·
By: Cumberland Valley Woodturners
December 25, 2015 · 96 views

Preparing bowl blanks

 

Creating Nested Bowl Blanks, by Mike Guyre ·
By: Gwinnett Woodworkers
December 17, 2015 · 6,449 views

Mike Guyre uses a OneWay Easy Core system to core 3 bowl blanks out of each of several maple logs. This type of system enables the user to improve the yield of bowl blanks from particularly good specimens of wood. Recorded and presented in HD 12-13-2015 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

#98 Stabilizing and Finishing Rotten Woodturning Blanks Part 2 ·
By: Stephen Ogle
November 08, 2015 · 47,445 views

After demonstrating for Peachstate Woodturners in Oxford GA last week. I decided to do this video series on how to stabilize rotten wood to use as woodturning blanks and get a glass like finish. The resin I use for stabilizing these blanks is 'Cactus Juice' from: http://www.turntex.com/ Please support the UK and Ireland's first Woodturning Symposium and visit them at: http://www.ukiws.co.uk/ http://facebook.com/ukiws

 

#97 Stabilizing and Finishing Rotten Woodturning Blanks Part 1 ·
By: Stephen Ogle
November 08, 2015 · 89,230 views

After demonstrating for Peachstate Woodturners in Oxford GA last week. I decided to do this video series on how to stabilize rotten wood to use as woodturning blanks and get a glass like finish. The resin I use for stabilizing these blanks is 'Cactus Juice' from: http://www.turntex.com/ Please support the UK and Ireland's first Woodturning Symposium and visit them at: http://www.ukiws.co.uk/ http://facebook.com/ukiws

 

Preparing a large bowl blank from a log section ·
By: SegmentedTurner
October 24, 2015 · 2,786 views

I take an aged section of black walnut log and show how to cut and mount a blank for a bowl.

 

How to find wood for woodturning and other wood projects. Making bowl blanks. Video #3 ·
By: Turnin Too
September 25, 2015 · 2,137 views

How to find wood for wood turning and other wood projects. -Making bowl blanks. More woodworking videos: https://www.youtube.com/watch?v q3e5KWDDZvY

 

Rough turn coffee tree bowl blank ·
By: H F Bowern Designs - Harold Bowern
September 10, 2015 · 559 views

Welcome Back!! Well in this video I am turning a coffee tree bowl blank. I got this blank from my local wood supplier A&M Wood Specialty in Cambridge Ont. The blank is approx 6 1/4' round and for the most part 4' tall. It was covered in wood preserver by A&M staff. I paid 6.00 for the blank. I bought another blank which I that I hope to turn in month or so. This is my first attempt at turning wet wood and I have learned quite a bit about tool presentation as well as making sure the tools are kept sharp. I have turned the blank down to approx 1' thickness in the walls and base and I have pu

 

Woodturning - Big bowlblank on the Stratos XL ·
By: Ginger Wood
September 02, 2015 · 6,874 views

Did a physical performance test with the Stratos XL woodlathe. I was asked to turn a pretty big bowlblank, to figure out how it performes at big diameters. Did a pretty good job. Video: https://www.facebook.com/labelherzflimmern

 

Turning a Tree Into Turning Blanks #17 ·
By: I Turn Two
August 16, 2015 · 1,759 views

Briefly highlight the steps taken to turn a two trunk tree into bowl and other blanks.

 

Woodturning Bowls blanks Explained part Two ·
By: Robbiethewoodturner
August 07, 2015 · 18,543 views

FOLLOW THE LINK FOR FOR PART ONE Woodturning Bowls blanks Explained part one https://www.youtube.com/watch?v FgOpnwe9DuI -------------------------------------------------------------------------------------------------------- Here's a list of my latest videos woodturning yew crouch vase https://www.youtube.com/watch?v 96HxD8GbBlU wood-turning a wooden shot barrel https://www.youtube.com/watch?v JmXs0f0N7MI Woodturning a Coopers Barrel https://www.youtube.com/watch?v fIP_rV3NC94 Woodturning Multi-axis paper knife https://www.youtube.com/watch?v XFSeREl5E-k Woodturning a clock https://www.youtube.com/watch?v J3AuDQ3rIy0 Welcome to my woodturning channel, I have lots of free videos with wood turning tips and projects. enjoy.

 

Woodturning Bowls blanks Explained ·
By: Robbiethewoodturner
July 31, 2015 · 38,771 views

Here's my latest videos I wasn't intending to video this but when i started turning some blanks i thought i should explain tool control that i use for rough bowl blanks Here's a list of my latest videos woodturning multy axis vases https://www.youtube.com/watch?v GXRLOeGTkIU woodturning yew crouch vase https://www.youtube.com/watch?v 96HxD8GbBlU wood-turning a wooden shot barrel https://www.youtube.com/watch?v JmXs0f0N7MI Woodturning a Coopers Barrel https://www.youtube.com/watch?v fIP_rV3NC94 Woodturning Multi-axis paper knife https://www.youtube.com/watch?v XFSeREl5E-k Woodturning a clock https://www.youtube.com/watch?v J3AuDQ3rIy0 Welcome to my woodturning channel, I have lots of free videos with wood turning tips and projects. enjoy.

 

Chainssaw blank destruction and a redesign! Woodturning A Maple Bowl. ·
By: Adze Woodturning
June 03, 2015 · 2,546 views

Doing a redesign on a blank I ruined with my 441 Stihl Chainsaw.

 

Large Bowl Turning, Part 1 Log to bowl blank ·
By: Chad Schimmel
May 22, 2015 · 1,805 views

In this series I visit a Large Bowl turning expert Dave from Artisan Woodturning LLC in Gilbert AZ. Dave shows us how to turn a large bowl starting from a log. This video is full of great info and tips as he spares no detals. Find Dave on facebook at https://www.facebook.com/pages/Artisan-Woodturning-LLC/439357576179825?fref ts IF you like the video give it a thumbs up and don't forget to subscribe to the channel. Featured Vendor, Fastcap. Everything you need. Www.fastcap.com If you are looking for custom pen blanks that I made please check out my ebay store at http://www.ebay.com/sch/schimmelsdust/m.html?item 201012656910&rt nc&_trksid p2047675.l2562 For finished pens made by Chad Schimmel visit http://www.impeccablepen.com Be sure and subscribe for new videos every Friday. For business inquires please email chadschimmel@gmail.com

 

ROUGHING CUTS WITH A CHAINSAWN BLANK by Reed Gray aka Robo Hippy ·
By: robohippy
April 27, 2015 · 3,828 views

Robo Hippy gives us a few tips on Roughing Cuts with a Chainsawn Blank.

 

#18 Cutting Blanks and a short tour ·
By: Uncle Cys Woodshop
April 26, 2015 · 1,639 views

Its finally warm enough to get outside and tackle my log piles. Skip to the 10 min mark for a short tour of the log piles, solar kiln and drying shed.

 

A day chainsawing bowl blanks at the wood lot ·
By: Adze Woodturning
April 17, 2015 · 3,817 views

I spent the day at a friends wood lot cutting bowl blanks and moving wood around with a wench. It was a great day, the weather started out ok and ended beautifully!

 

Cutting blanks of Red Oak ·
By: Solway Wood Turning
March 08, 2015 · 41 views

Cutting Red Oak blanks from a large slab, using Stihl 029 with 20' bar.

 

Cutting bowl blanks from Red Oak ·
By: Solway Wood Turning
March 08, 2015 · 49 views

via YouTube Capture

 

Cutting Red Oak Blanks ·
By: Solway Wood Turning
March 08, 2015 · 20 views

Cutting Red Oak blanks from a large slab, using Stihl 029 with 20' bar.

 

Woodturning - Cutting a large log for bowls ·
By: Kim Gowney
March 06, 2015 · 1,189 views

Deciding on the best way to use a large log of Alder

 

Truing Up a Walnut Bowl Blank in HD - Woodturning How-To ·
By: The Woodturning Store
March 05, 2015 · 15,039 views

In this short video, Steve Fulgoni shows how to quickly true up a walnut bowl blank on a Robust American Beauty Wood Lathe with a Hurricane Turning Tools CPM-10V Bowl Gouge. Robust Lathes and Hurricane Tools can be purchased at The Woodturning Store http://www.thewoodturningstore.com. Please subscribe to my channel and send me any comments or suggestions. Check out my website at: http://www.thewoodturningstore.com or http://www.woodturner.co On my website you will find Hurricane Tools and Chucks, Projects Supplies and I am also an authorized dealer for Robust Lathes and tools

 

The bandsaw wants to eat my fingers. Cutting Blanks. ·
By: Adze Woodturning
February 13, 2015 · 777 views

An easy method of cutting stock from green logs prepped with a chain-saw. I've cut all sides on the video but you really only need to cut two sides (one for the bed and one for the guide). I slipped when I was cutting but I was using push sticks...I still have all my fingers.

 

Bowl Blank on Bandsaw ·
By: John Bare
February 06, 2015 · 126 views

Making a bbows blank more or less round.

 

Wood turning One blank two bowls ·
By: Hendrik van Taak
January 21, 2015 · 1,009 views

Turning two bowls out of one blank with the Bowlsaver

 

Cutting up bowl blanks with chain saw 01 ·
By: Ethan Cook
January 18, 2015 · 209 views

Built a doohicky to hold my logs better and safer than on the ground. Most of my cuts are ripping the logs in half, cuttin out the heart/pith then cutting corners off for bowl blanks.

 

The Blind Wood Turner - Episode 18 - Beech Blank Bowl ·
By: Blind Wood Turner
January 16, 2015 · 3,223 views

In this episode, I take a beech bowl blank and turn it into a shallow bowl.

 

Reed Gray aka Robo Hippy presents Mounting Bowl Blanks, Recess, Tenon and Faceplate ·
By: robohippy
December 29, 2014 · 78,180 views

Robo Hippy shares his insights on Mounting Bowl Blanks, the Recess, the Tenon and mounting a Faceplate

 

woodTurning a bowl blank Boots and Pants techno Boston Woodturning 2014 ·
By: Boston Woodturning
December 06, 2014 · 91 views

Woodturning a bowl blank from half of a log with boots and pants techno music- http://www.boston woodturning.com

 

Turning green wood sycamore bowl blanks Boston Woodturning 2014 ·
By: Tommy G
November 21, 2014 · 902 views

Turning a green wood bowl blank out of sycamore tree to seal and store for a while before it becomes a bowl.

 

Bowl Blank: Square to Round, Part 3: Almost Finished ·
By: Brad Vietje
November 16, 2014 · 565 views

Nearly finished the bowl before the camera batteries died from the low temp's. Will post a photo of the finished bowl after finish sanding and a little Danish oil finish. Cut short by the batteries running out of juice.

 

Bowl Blank: Square to Round, Part 2: Turning the Bowl ·
By: Brad Vietje
November 16, 2014 · 1,405 views

Having turned the outer profile, let's mount it in the chuck jaws and finish the bowl.

 

Bowl Blank: Square to Round on Wood Lathe ·
By: Brad Vietje
November 16, 2014 · 4,142 views

Bowl Blank: Square to Round on Wood Lathe Part 3: https://www.youtube.com/watch?v lHSqwail4vA

 

Cutting Bowl Blanks From the Log ·
By: James Walt
October 30, 2014 · 299 views

This is a demo of Ken cutting bowl blanks from a Maple log.

 

BANDSAWS & BOWL BLANK PREP by Reed Gray aka RoboHippy ·
By: robohippy
October 14, 2014 · 19,876 views

More in depth discussion by RoboHippy of Bandsaws and Bowl Blank Prep.

 

CHAINSAWS & BOWL BLANK PREP by Reed Gray aka RoboHippy ·
By: robohippy
October 13, 2014 · 109,733 views

RoboHippy shares some valuable insights on Bowl Blank Prep and using Chainsaws safely and effectively.

 

Preparing a blank for turning the best and fastest way ·
By: Jack Nelson
May 11, 2014 · 203 views

This video shows a new fast way to prepare a blank that will be used to turn a bowl with a natural bark edge.

 

Cocobolo (woodturning blank) ·
By: Craft Supplies USA
April 11, 2014 · 9,126 views

Cocobolo is a tropical hardwood found throughout Central America. Buy now: https://www.woodturnerscatalog.com?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Cocobolo varies in color from bright orange to deep red, with attractive variegated stripes of yellow, orange and black. Known for its rich look and dense grain, Cocobolo cuts clean and takes fine detail when using sharp tools. While it sands and finishes easily, Cocobolo also holds up well to repeated handling and exposure to moisture. Co

 

Wood Turning Bowl Blank Storage in my basement ·
By: Turning Round
January 05, 2014 · 595 views

This is a short introduction on how I store and weigh my roughed out wet bowl blanks over a long period of time and know they are done drying and moving. Once the weight has stabilized then I know they are ready for final turining.

 

#17 Bowls from Logs Part 1 Cutting Blanks from Logs ·
By: Stephen Ogle
January 05, 2014 · 76,812 views

In order to answer questions from viewers, I have planned a series of videos to explain all aspects of bowl turning all the way from a green log. These are the methods I use and work well for me. This is the first video in the series and will show and tell everything i know about cutting blanks from logs.

 

Split turning Part 2 of 2 - Mounting the blank, turning and splitting ·
By: Bob Hamilton
January 05, 2014 · 4,142 views

Split turning is a technique to make identical half round spindles for use as applied moldings on furniture or architectural projects. This video is part 2 of a 2 part series on using a paper joint to make a split turning.

 

Split turning Part 1 of 2 - Preparing the blank ·
By: Bob Hamilton
January 05, 2014 · 3,925 views

Split turning is a technique to make identical half round spindles for use as applied moldings on furniture or architectural projects. This video is part 1 of a 2 part series on using a paper joint to make a split turning.

 

#02 Sealing Wood Turning Blanks Endgrain ·
By: Stephen Ogle
October 16, 2013 · 56,872 views

A cheap way to seal your blanks for later turning or woodwork of any kind.

 

Band-sawing a Bowl Blank: Woodturning ·
By: WYOMINGWOODTURNER
October 10, 2013 · 4,897 views

Sam demonstrates how to cut a circle with a simple jig. He then cuts an ash bowl blank free hand on the bandsaw.

 

Wood Turning Bowl Blank Storage ·
By: Turning Round
September 26, 2013 · 4,976 views

Tips and tricks for storing green wood Bowl Turning Blanks.

 

Chainsaw faceting with Aaron Hammer: Making circles with a chainsaw ·
By: Aaron Hammer
May 30, 2013 · 12,592 views

I developed this technique to facet large diameter bowl blanks with a chainsaw for several reasons. The bowl blank is mounted on the lathe with a faceplate in the exact place it will be turned from. Using the chainsaw as a fixed chopsaw and rotating the wood using the indexing head on the headstock to lock it into 24 equally spaced positions gives me a very true circumference. This allows me to rough out the piece very quickly, starting with higher speeds due to it's good balance and the the cuts can be made quickly and easily removing 1/4 inch to achieve a completely true surface. Often when doing this I will cut 2 or 3 rows of facets on the backside of the bowl removing significant amounts of wood concentrically with the chainsaw instead of a turning gouge.

 

Desert Ironwood (woodturning blank) ·
By: Craft Supplies USA
March 13, 2013 · 26,908 views

Desert Ironwood is the perfect choice for woodturners that want crisp detail in their work. Buy now: https://www.woodturnerscatalog.com/p/8/5047/Pen-Makers-Choice-Exotic-Pen-Blanks?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA (Olneya tesota) One of the most hard and dense woods in the world (that actually sinks in water) features dark black/brown striping alternated with yellow/red portions. Craft Supplies USA (The Woodturners Catalog) carries the largest selection of woodturning tools and

 

Simple Jig for Cutting a Bowl Blank ·
By: Angus Pitt
November 20, 2012 · 22,621 views

In this video I show you how to use a simple jig to cut a bowl blanks ready to turn on the lathe on the bandsaw.

 

Rough cutting cherry logs into bowl blanks ·
By: 207 Made
October 09, 2012 · 1,872 views

https://www.facebook.com/pages/Spencers-Wooden-Creations/112917125483794

 

Lyle on Mounting Wood Blanks on a Lathe ·
By: Lyle Jamieson
October 03, 2012 · 214,603 views

Lyle Jamieson stresses safety to securely hold a bowl blank on a lathe. He starts between centers using a balance point.

 

Lyle on Chainsaw Use for Woodturning.mp4 ·
By: Lyle Jamieson
October 01, 2012 · 143,964 views

Lyle illustrates how to use a chainsaw safely. Lyle Jamieson stresses having a balanced grain orientation while preparing a wood blank for use in woodturning.

 

Aaron Hammer- Preparing bowl blanks for turning ·
By: Aaron Hammer
September 14, 2012 · 4,043 views

To contact me please email me hammercraft@mac.com Using the chainsaw and bandsaw, this video shows me preparing many bowl blanks for the lathe. I live in Hauula Hawaii, I operate a one-man wood turning shop where I work with wood that I acquire from tree trimmers and transform it into cherished objects. Please leave a comment

 

Cutting logs for great bowl blanks. ·
By: Dan Walker
August 27, 2012 · 44,188 views

 

Prepping turning blanks for mounting in a chuck ·
By: treesandclay
April 11, 2012 · 1,050 views

Using a multi-tooth drive center to prep three blanks for mounting in my chuck without having to stop the lathe or measure with calipers. A relatively uneventful video setting up for something more interesting.

 

2 Bowl Blanks Get Wood Turned Into Large Segmented Vessel Part2/2 ·
By: Getting0Done
February 06, 2012 · 39,175 views

Small bowls can get boring quite fast but I am reluctant to stop turning them. So with a little imagination, two ordinary small bowls turn into one vessel. From bottom to top: ziricote, walnut blank, ziricote, zebrawood and ziricote accent ring, another ring of ziricote, the top walnut blank, a trim ring consisting of maple and walnut veneer stacked and segmented, and finally ziricote sapwood. I think it turned out amazing as I was quite reluctant half way through, first time trying veneer in a bowl and it payed off. If you missed part one click the annotation in the video or down below. http://www.youtube.com/watch?v gF_8YjuL5KE&feature plcp&context C310dd7fUDOEgsToPDskLehhxwTI4zMh-DET4entjL Hope you guys enjoy it and please comment, rate and subscribe for more videos to come.

 

2 Bowl Blanks Get Wood Turned Into Large Segmented Vessel Part1/2 ·
By: Getting0Done
February 05, 2012 · 13,261 views

Small bowls can get boring quite fast but I am reluctant to stop turning them. So with a little imagination, two ordinary small bowls turn into one vessel. From bottom to top: ziricote, walnut blank, ziricote, zebrawood and ziricote accent ring, another ring of ziricote, the top walnut blank, a trim ring consisting of maple and walnut veneer stacked and segmented, and finally ziricote sapwood. I think it turned out amazing as I was quite reluctant half way through, first time trying veneer in a bowl as well and it payed off. Please watch part 2 for the final turning and finshing! Dont forget to give me your thoughts, rate and subscribe for more to come!

 

Walnut Blank Wood Turned and Finished ·
By: Getting0Done
January 15, 2012 · 3,301 views

Managed to obtain a lot of Western Canadian Walnut that I seasoned and turned some rough blanks out of. Months later this is the result of one of those blanks, it isn't as dark as most walnuts but turned out nice regardless. I am hoping to do a narrated video on my homemade wood lathe once I figure a few camera things out first so stay tuned for more to come. Please rate, comment and subscribe!

 

sawing wood log into bowl turning blanks 4 ·
By: 207 Made
January 04, 2012 · 219 views

https://www.facebook.com/pages/Spencers-Wooden-Creations/112917125483794

 

sawing wood log into bowl turning blanks 3 ·
By: 207 Made
January 04, 2012 · 207 views

https://www.facebook.com/pages/Spencers-Wooden-Creations/112917125483794

 

sawing wood log into bowl turning blanks 2 ·
By: 207 Made
January 04, 2012 · 280 views

https://www.facebook.com/pages/Spencers-Wooden-Creations/112917125483794

 

sawing wood log into bowl turning blanks ·
By: 207 Made
January 03, 2012 · 438 views

https://www.facebook.com/pages/Spencers-Wooden-Creations/112917125483794

 

No Chuck Bowl Segment 1 - Mounting the blank ·
By: Bob Hamilton
April 01, 2009 · 37,264 views

This is a companion video for the pictorial article on my website ( http://bobhamswwing.com/my_woodworking.htm ), demonstrating one of the many possibilities for mounting and turning a bowl blank on a wood lathe without using a chuck. Despite chopping out quite a bit of the repetitive sanding sequences the series still rungs to 13 segments with a run time of more than an hour and a half. It pretty much had to be a 'one take' series since I couldn't put the wood back on the bowl if the recording proved faulty, but it turned out fairly well in that regard right up until the final few minutes.

 

Return to Turning Videos

Great Bargains


Heavy Duty Live Center

On Sale for only $16.53

List Price: $19.95

Click here for more information or to purchase

 


Dremel Rotary Tool Kit

On Sale for only $139.00

Save $60.99 (30%)

List price: $199.99

Click here for more information or to purchase


Roller Stand

On Sale for only $23.79

Save $6.11 (20%)

List Price: $29.90

Click here for more information or to purchase

 


Easy Wood Tools - Easy Start Rougher + Finisher + Detailer

On Sale for only $159.99

List price: $206.97

These tools have the smaller 9" maple handle and are 12.5" overall.

Click here for more information or to purchase


NOVA 48232 G3 Reversible Wood Turning Chuck

On Sale for only $99.00

Save $60.99 (38%)

List price: $159.99

Click here for more information or to purchase

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Flutemaster
Robust Tools
Woodturning with Tim

(Click any Ad to go to our Sponsor's Website)