Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Conferences, Shows, Club Meetings Videos (506)

Sort by

Or click here to: Search All Videos


2018 LLWW Pen Swap Announcement
By: Lynn Lacey
July 24, 2018 · 504 views

Announcing the 3rd Annual 2018 LLWW Pen Swap - Details of the swap will be forth coming in August. In My Shop; Many of the things I use can be found here; You can help support my channel through purchases from my affiliate links. https://www.amazon.com/shop/lynnlaceyllww Disclaimer: My videos represent how I go about my woodworking. They are for your entertainment and not instruction. My safety is MY responsibility and YOUR safety is YOUR responsibility. Before beginning any woodworking be familiar with your equipment and always - always wear the proper personal protective equipment. When performed safely, woodworking be fun and rewarding. Keep it fun by working safe.

 

Coloring Wood
By: Lee Burkholder
July 19, 2018 · 247 views

Cumberland Valley Wood Turners, wood working, lathe, turning bowls, wood coloring, paint wood work, finishing wood, turning wood,

 

2018 AAW Symposium - Memories
By: Gord Rock
July 13, 2018 · 771 views

A quick look at a few of the items in the Instant Gallery and a few of the subscribers I was able to meet at the Symposium in Portland. I had a wonderful time there and wanted to share a bit of it with you. Carl Jacobson's channel: https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Heath Knuckles channel: https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ Mike Peace's channel: https://www.youtube.com/channel/UCdIka2H34Kh-9mPhWGLwg_g

 

KCWT 2018 July Challenge and ShowNTell
By: KCWoodturners1
July 10, 2018 · 38 views

KC Woodturners Association regular meeting July 2018. Puzzle Challenge and Show and Tell. Meeting at KC Woodturners clubhouse.

 

KCWT Club Demo 07 07 2018 McMahon and Coyan make Top Games
By: KCWoodturners1
July 10, 2018 · 49 views

KC Woodturners Association Demo 7/7/2018. Shaun McMahon and Kris Coyan make games used with spinning tops. Video made at the KCWT clubhouse during a regular meeting.

 

Woodturning - UKIWS 2018 Round Up
By: Blind Woodturner
July 07, 2018 · 272 views

A video round up of UKIWS 2018. What a great event! We had an amazing time and met up with old friends and made new ones. Fantastic to catch up with everyone and well done to Martin and the team for putting on another fab weekend. Featured in the video: UKIWS - http://www.ukiws.co.uk/ Martin Saban-Smith - http://www.msabansmith.com/ Trend - http://www.trend-uk.com/en/UK/product/index.php Emma Cook - https://www.thetinyturner.co.uk/ Mick Hanbury - https://www.facebook.com/Mick-Hanbury-934879776553844/ Simon Hope - https://hopewoodturning.co.uk/ Pat Carroll - https://www.patcarrollwoodturning.

 

NWGA Woodturners July 2018 Club Meeting with Demo
By: Austringer Creations
July 01, 2018 · 113 views

The June, 2018 meeting of the Northwest Georgia Woodturners club featuring a demonstration by Jess Walls, the President of the North Alabama Woodturners club. Jess turned a lidded bowl from Sycamore for us this month. Unfortunately, we only got footage from one camera but it was a close-up view of the lathe. If you're in the area, feel free to join us at 6:00 pm on the fourth Thursday of each month in the 'Big Room' at the Charles Parker Senior Center located at 1325 Kingston Hwy in Rome, GA. 30161.

 

AAW Annual Symposium Powermatic Raffle Drawing has a winner Hot Dog!
By: American Association of Woodturners
June 27, 2018 · 73 views

JET Powermatic (JPW Industries) was the exclusive lathe sponsor and supplier for the 2018 AAW Portland Symposium. They loaned AAW Powermatic 3520 lathes and JET 1221 mini lathes for demonstrators, and JET bandsaw for tool room. JPW Industries also donated a Powermatic 3520C lathe and a JET 1221 mini lathe and stand for the lathe raffle. Tickets sold: 1,700 (Approximately) The raffle proceeds support activities of local AAW chapters in Oregon. Winner of the Powermatic 3520 hand painted by Portland artist René Eisenbart: Joel Bossley, Columbus, Ohio. Winner of the JET Midi Lathe/Stand Winner: Jeff Foro, Sequim, WA.

 

Makers - Who wants to come to Makers Central 2019 ? #MC2019
By: Nick Zammeti NZ WoodTurning
June 27, 2018 · 8,819 views

Makers Central 2019 https://www.makerscentral.co.uk/ Nick Zammeti/ NZ Woodturning Instagram https://www.instagram.com/nickzammeti Nick Zammeti Personal Instagram https://www.instagram.com/zammeti My Website http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.recordpower.co.uk/ ………………………………………………………………………………………………………………………………………………………

 

2018 AAW Symposium in Portland, OR
By: Mike Peace Woodturning
June 20, 2018 · 1,624 views

Just a few remembrances of the recent American Association of Woodturners Symposium held in Portland, OR Jun 15-17, 2018 I upload new wood turning videos regularly so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! http://lucidwoodturners.clubexpress.com/ 2 Tree Boyz Wood is a family-operated business providing beautiful hardwood turning blanks to clients all over the US. http://www.2treeboyz.com/ You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

AAW Livefeed 1
By: EasyWoodTools
June 15, 2018 · 328 views

AAW Symposium, Portland, OR 2018 Live feed from the Easy Wood Tools Booth. Day one... just getting started!

 

KCWT 2018 June Challenge and ShowNTell
By: KCWoodturners1
June 14, 2018 · 44 views

KC Woodturners Association June 2018 regular meeting. Hollow Turning Challenge and Show and Tell. Meeting at KC Woodturners Clubhouse.

 

KCWT Club Demo 06 11 2018 Mike McReynolds Makes A Mystic Box
By: KCWoodturners1
June 14, 2018 · 63 views

KC Woodturners Association demo. Mike McReynolds shows how to make a Mystic Box. Instruction sheet is on the KCWT website in the Library section.

 

The Makers Central Event 2018 - Vlog
By: Nick Zammeti NZ WoodTurning
May 20, 2018 · 5,952 views

FOLLOW ME ON INSTAGRAM https://www.instagram.com/nickzammeti/?hl en MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.recordpower.co.uk/ WOODWAX 22 & SANDING SEALER http://www.chestnutproducts.co.uk/ TRITON TOOLS http://www.tritontools.com/en-GB EASYWOOD TOOLS UK https://go

 

KCWT 2018 May Challenge and ShowNTell
By: KCWoodturners1
May 18, 2018 · 54 views

KC Woodturners Association May 2018 regular meeting. Captive Ring or Sphere Challenge and Show and Tell. Meeting at the KC Woodturners clubhouse.

 

KCWT Club Demo 05 14 2018 Kevin Neelley Shows Trent Bosch Hollowing Tools
By: KCWoodturners1
May 18, 2018 · 95 views

KC Woodturners Association Demo 5-14-2018. Kevin Neelley shows how to use two Trent Bosch tools: The Stabilizer and The Visualizer.

 

Utah Woodturning Symposium 2018
By: WYOMINGWOODTURNER
May 17, 2018 · 2,637 views

Sam reports back after returning home from the Utah Woodturning Symposium. He offers his thoughts on the symposium and a slideshow of artwork and friends found in the instant gallery. To see more of Sam's work visit--- www.samangelo.com www.wyomingwoodturner.com ETSY https://goo.gl/Q75Co1

 

Makers Central - When Turners Collide!
By: Turning Works
May 12, 2018 · 344 views

Steve and Dave had been at each other's throats, the tension had been building all day only to be released in the bar... ...but this time, there would be pain and running around... ...LOTS of running around... and slapping, don't forget the slapping... ...and poking with pointy things!

 

makers central visit....
By: JR turn it around
May 08, 2018 · 68 views

me at makers central meeting people and getting the secret bowl signed.... Yorkshire grit http://yorkshire-grit.com/ Sanding sealer https://chestnutproducts.co.uk/product/cellulose-sanding-sealer/ Woodwax 22 https://chestnutproducts.co.uk/product-category/waxes/ lathe and tools and chuck http://www.recordpower.co.uk

 

GRWG Meeting 2018 04
By: Grand River Wood Turners
May 07, 2018 · 60 views

Grand River Woodturners Guild general meeting.

 

Makers Central 2018
By: John Clothier
May 07, 2018 · 3,259 views

This video is all about my visit to Makers Central 2018 at the NEC in the UK. Makers Central 2018 was an event put on by Nick Zammit from NZ Woodturning. YouTubers and makers from all over the world attended Makers Central 2018 and we all had a great time. Dont forget to visit my other social media: Website - https://www.johnclothier.co.uk Instagram - https://www.instagram.com/JohnClothierUK/ Facebook - https://www.facebook.com/JohnClothierUK/ Twitter - https://twitter.com/JohnClothierUK John Clothier is a proud member of the Small Workshop YouTube Makers group on Facebook https://www.facebook.com/groups/109030066480071/ John Clothier is also a proud member of the Makers Media Network http://makersmedianetwork.com

 

Makers Central
By: Nick Zammeti NZ WoodTurning
May 05, 2018 · 10,058 views

MAKERS CENTRAL WEBSITE https://goo.gl/x3yVjm MY WEBSITE http://www.nzwoodturning.co.uk/ FOLLOW ME ON INSTAGRAM https://www.instagram.com/nickzammeti/?hl en MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.re

 

Talking Turning & Tea - Hidden Heroes, Makers Central at the NEC
By: Blind Woodturner
May 04, 2018 · 433 views

In this episode of Talking Turning & Tea, I talk about being recognised as a Hidden Hero of Lancashire and the forthcoming Makers Central. *** Proudly sponsored by Axminster Tools & Machinery. Axminster Tools & Machinery offer an extensive range of quality, value for money tools and machinery. https://www.axminster.co.uk/ *** Join me, Chris Fisher, the Blind Wood Turner, in my workshop. I started out in life as a regular guy, working in auto body repair at BMW, until one day, completely out of the blue, a rare virus (Toxoplasmosis) reared its ugly head and caused me to lose my sight in

 

Makers Central Update!
By: Yuval Lahav Woodturning
May 02, 2018 · 1,735 views

Makers Central is about to be upon us, and I needed to put in a few words and update you guys about what is going on, and will go on, at the event. Makers Central site - http://www.makerscentral.co.uk/ Makers Central Tickets - http://www.makerscentral.co.uk/BUY-TICKETS Patreon: https://www.patreon.com/YuvalLahav Twitter: https://twitter.com/YL_Woodturning Instagram: https://www.instagram.com/yuval_lahav_woodturning/ Facebook: https://www.facebook.com/yuval.lahav.16 Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Reddit: https://www.reddit.com/user/aforeignitalian/ Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: Ken Rogoway, Michael L. Kent, Tom Millward and Tracy Keaton!

 

MAKERS CENTRAL HAS ARRIVED !!!!
By: Templeboy Turnings
May 01, 2018 · 656 views

A short video to let folk know my plans for the up and coming Makers central event this weekend 5th and 6th of May 2018. If you are around Birmingham come say hi !! Yorkshire Grit Instagram link https://www.instagram.com/yorkshiregrit/?hl en Yorkshire Grit Facebook link https://www.facebook.com/yorkshiregritpaste/ Makers Central website link http://www.makerscentral.co.uk/ Thank you to my sponsors Yorkshire Grit and Crown hand tools. All woodturning tools used in this video were Crown hand tools :- http://www.crownhandtools.ltd.uk/ Yorkshire Grit woodturners abrasive paste :- http:

 

Woodturning Forums
By: Mike Peace Woodturning
May 01, 2018 · 1,802 views

Mike explains about wood turning forums and how they can be a valuable resource, especially for novice turners. I upload new wood turning videos regularly so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturni

 

KCWT Club Demo 4 9 2018 Jerry McMaster Makes Captive Spheres
By: KCWoodturners1
April 14, 2018 · 94 views

KC Woodturners Association Club Demo 4-9-2018. Jerry McMaster makes captive spheres. Demo at KCWT clubhouse at regular meeting.

 

What to expect at the Utah Wood Turning Symposium
By: Turning Round
April 14, 2018 · 324 views

In this video I show some of the things that happen at the wood turning Symposium. This shows you what to expect when you come to the Utah Wood Turning Symposium

 

Dale Larson Part 2
By: Olympic Peninsula Woodturners
March 22, 2018 · 68 views

Wood turner Dale Larson demonstrated a special Vicmarc chuck that allows a turner to create an oval bowl during OPCAAW's February meeting. Part 2 of 2.

 

Dale Larson Part 1
By: Olympic Peninsula Woodturners
March 22, 2018 · 182 views

Wood turner Dale Larson demonstrated a special Vicmarc chuck that allows a turner to create an oval bowl during OPCAAW's February meeting. Part 1 of 2.

 

AAW Woodturning Community Making a Difference
By: American Association of Woodturners
March 22, 2018 · 214 views

The American Association of Woodturners is a non-profit based in St Paul, Minnesota. We are an international service organization with a rich 32 year history of cultivating the craft of woodturning. We are making a difference in the communities that support us through programs such as Beads of Courage, Turners without Borders, and Empty Bowls. We are training the next generation and support growing woodturning programs by donating tools and equipment to help them get started. Join us as we continue to make a positive difference and bring the joy and craft of woodturning to people around the globe. woodturner.org

 

Jack Wayne Part 2
By: Olympic Peninsula Woodturners
March 20, 2018 · 99 views

Seattle woodturner Jack Wayne demonstrated creating bowls that are works of art during the OPCAAW meeting in November 2017. Part 2 of 2.

 

Jack Wayne Part 1
By: Olympic Peninsula Woodturners
March 20, 2018 · 129 views

Seattle woodturner Jack Wayne demonstrated creating bowls that are works of art during the OPCAAW meeting in November 2017. Part 1 of 2.

 

Makers Rock 2018 Announcement
By: John Clothier
March 15, 2018 · 289 views

Makers Rock 2018 is going to be the biggest yet! When you have watched my promo video go check out all the others! Please visit the other participants at: Alex Krause https://www.youtube.com/channel/UClhMySB3K2iKAWQfve_wsCg Andrew Setters https://www.youtube.com/andrewsetters Awesome Wood Things https://www.youtube.com/AwesomeWoodThings1 Carl Jacobson https://www.youtube.com/user/haydenHD CharlesDearingScroll https://www.youtube.com/user/CharlesDearingScroll CO Schwenke & Son https://m.youtube.com/user/clarkschwenke1 Cross Cut Creations https://www.youtube.com/channel/UC54fkSR_LBTnG69w

 

2x4 Challenge Woodturners of SW MO
By: Woodturners of Southwest Missouri
March 09, 2018 · 463 views

It's that time of year again when we have our 2x4 Challenge. Be sure to understand the rules in this video. Also, we address the 'Turning of the Tops' for our fund raising for the Breast Cancer Foundation of the Ozarks. Finally, take time to watch Larry's video on how he created the Sweetheart Bowl: https://youtu.be/y6lozGx8vjs Visit Us at: http://www.woodturnersofswmo.org

 

GRWG Meeting 2018 02
By: Grand River Wood Turners
February 20, 2018 · 41 views

Grand River Woodturners Guild February 2018 general meeting. We opened with a discussion on different types of steel used in turning tools.

 

KCWT 2018 Feb Challenge ShowNTell
By: KCWoodturners1
February 13, 2018 · 94 views

KC Woodturners Association February 2018 regular meeting Platter Challenge and Show and Tell. Meeting at the KC Woodturners clubhouse.

 

KCWT Club Demo 02 12 2018 Home made Tools
By: KCWoodturners1
February 13, 2018 · 126 views

KCWT regular club meeting demo. February 2018. Members bring in home-made tools and describe. Demo was at the KC Woodturners clubhouse.

 

SU4TurnersA
By: charlieb1946
February 06, 2018 · 74 views

 

AAW Portland Symposium, June 14 17, 2018
By: American Association of Woodturners
January 24, 2018 · 540 views

Gain insights and motivation. Fast-track your learning curve. Join us for the AAW's 32nd Annual International Symposium! June 14 -17, 2018. The conference will bring together more than more than 1,200 turners from around the globe to learn, share, and celebrate the art and craft of woodturning making it the largest woodturning event in the world. No other event offers as many opportunities to learn from the world’s best. Registration is now open, visit our website for more information woodturner.org

 

KCWT Club Demo 01 08 2018 Anthony Harris Platter
By: KCWoodturners1
January 21, 2018 · 133 views

Anthony Harris Turns a Platter. Demo at the KC Woodturners regular meeting on 1-8-2018 at the KCWT clubhouse.

 

KCWT 2018 Jan Challenge ShowNTell
By: KCWoodturners1
January 12, 2018 · 93 views

Kansas City Woodturners Association regular monthly meeting at the KCWT clubhouse on 1/8/2018. Video of monthly Woodturning Challenge and Show and Tell.

 

December 10th IKI Club Meeting Demonstration - Wood Piercing and Stain vs. Dyes
By: IKI Woodturners
January 06, 2018 · 138 views

This video was filmed at the 12/10/2017 IKI Club Meeting. Bill Rogers demonstrated wood piercing and the tools he uses. Toward the end of the demo he gave his thoughts on wood stain versus wood dye. We record out meetings so club members who can not attend can still participate in the demonstrations.

 

David Lutrick Part 2
By: Olympic Peninsula Woodturners
December 25, 2017 · 91 views

David Lutrick demonstrated making wood turned Christmas ornaments from sea urchin shells at our September 2017 meeting. Part 2 of 3.

 

David Lutrick Part 3
By: Olympic Peninsula Woodturners
December 24, 2017 · 99 views

David Lutrick demonstrated making wood turned Christmas ornaments from sea urchin shells at our September 2017 meeting. Part 3 of 3.

 

Kathleen Duncan Part 3
By: Olympic Peninsula Woodturners
December 23, 2017 · 39 views

Kathleen Duncan demonstrates piercing thin-walled bowls during a meeting of the Olympic Peninsula Woodturners. Demonstration took place in July 2017. Part 3 of 3.

 

Festival of Trees-2017 wyomingwoodturner
By: WYOMINGWOODTURNER
December 20, 2017 · 1,975 views

This video covers the local fundraiser, 'Festival of Trees.' The video showcases the tree decorated by our local, awesome club-the Worland Wyoming Woodturners. The trees are auctioned off and proceeds distributed to local organizations. Our tree brought in a winning bid of 1300.

 

GRWG 2017 12 meeting
By: Grand River Wood Turners
December 20, 2017 · 20 views

December General Meeting

 

Bowl Turning - December 2017
By: BayLake Woodturners
December 16, 2017 · 119 views

BayLake Woodturners member Kevin Carpenter demonstrates turning a bowl from a very dry piece of wood.

 

KCWT Club Meeting 12 11 2017 Bell Ornament Turning Team Race
By: KCWoodturners1
December 12, 2017 · 105 views

KC Woodturners Club Meeting December 11, 2017 at the KC Woodturner Clubhouse. Team Turning Event: Xmas Bell Ornament. Three teams compete at timed turning race.

 

Molly Winton Design and Embellishment Part 1
By: Olympic Peninsula Woodturners
December 11, 2017 · 289 views

Molly Winton demonstrated the design concepts she uses to create nationally recognized artistic woodturning during OPCAAW's October 2017 meeting. Part 1 of 3.

 

Molly Winton Design and Embellishment Part 2
By: Olympic Peninsula Woodturners
December 11, 2017 · 135 views

Molly Winton demonstrated the design concepts she uses to create nationally recognized artistic woodturning during OPCAAW's October 2017 meeting. Part 2 of 3.

 

Molly Winton Design and Embellishment, Part 3
By: Olympic Peninsula Woodturners
December 11, 2017 · 127 views

Molly Winton demonstrated the design concepts she uses to create nationally recognized artistic woodturning during OPCAAW's October 2017 meeting. Part 3 of 3.

 

The American Association of Woodturners 32nd Annual International Symposium Portland, Oregon June 14
By: American Association of Woodturners
December 07, 2017 · 163 views

The American Association of Woodturners 32nd Annual International Symposium Portland, Oregon June 14-17, 2018

 

AAW Turning to the Future, supporting the education of the next generation
By: American Association of Woodturners
December 07, 2017 · 94 views

AAW's Turning to the Future offers information and resources designed specifically to help teachers, schools, instructors, and other educators, develop programs to teach woodturning skills.

 

AAW welcomes you to the woodturning community! woodturner.org
By: American Association of Woodturners
December 07, 2017 · 173 views

Woodturning is not only fun, it welcomes you into a community of people who gladly share what they know. The articles and videos in the Woodturning FUNdamentals section of this website will help you learn what you need, whether you’re starting a new hobby or plan to become a pro.

 

Wood Turning - The Harrogate Show 2017
By: Mike Waldt
November 21, 2017 · 6,896 views

A small taste of the superb experience I had when I was on the Simon Hope Stand at The Harrogate Show last weekend. To everyone who contributed to my having the time of my life, a huge thank you :) Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk/ Makers Central YouTube Channel: https://www.youtube.com/channel/UCJSr... Makers Central website: http://www.makerscentral.co.uk/ NZ Woodturning: https://www.youtube.com/channel/UC3-0... Wayne Clasper: https://www.youtube.com/channel/UC77Gdc7anv5oyKft_UaPtrg?

 

GRWG Demo, Chucks; Jam, Cole & Vacuum
By: Grand River Wood Turners
November 16, 2017 · 60 views

The Grand River Wood Turners Guild is located in Grand Rapids MI. We meet on the 3rd Saturday of each month. This month's demo is how to finish the bottom of a bowl, three ways to chuck it up. Find us on Facebook: https://www.facebook.com/Grand-River-Wood-Turners-Guild

 

The Free Pen Draw #8 - 'The Draw'
By: Ron Calverley
November 15, 2017 · 393 views

This “Free Draw” is open only to members of the “Manitoba CAN-RC and URC, buy & sell” FaceBook Group living in Manitoba.

 

KCWT Club Demo 11 13 2017 Mike Thomas Bandsaw Safety
By: KCWoodturners1
November 14, 2017 · 156 views

KC Woodturner Club monthly meeting demo 11-13-2017. Member Mike Thomas demonstrates bandsaw safety and using a chainsaw to get a log ready for lathe turning. Location at KCWT clubhouse.

 

KCWT Club Meeting 11 13 2017
By: KCWoodturners1
November 14, 2017 · 67 views

Kansas City Woodturners Association regular monthly meeting at the KCWT clubhouse on 11-13-2017. Video of monthly Woodturning Challenge and Show and Tell.

 

Turning Saturday 2017
By: Lincoln Land Woodturners
November 13, 2017 · 23 views

Guest John Buerer from the turns a lidded acorn box during the club's 'Turning Saturday' event on October 21, 2017.

 

November 2017 BayLake Woodturners
By: BayLake Woodturners
November 11, 2017 · 1,511 views

BayLake Woodturners member Ed Cole turns a Key Fob and explains the use of the Joyner Eccentric Chuck. The Joyner jig is an eccentric chuck that allows you to make an unlimited array of original items including pendants, earrings, box lids, bottle stoppers, compact mirrors, fridge magnets, etc.

 

Christmas Decorations on the Lathe
By: DentonTurners
November 07, 2017 · 8,317 views

Sammy Thomason returns and shows us some ideas for making Christmas decorations on the lathe. He makes Christmas trees, Angels, and talks about tips and methods for making inside-out ornaments. Enjoy!! This was recorded at the monthly meeting of the Golden Triangle Woodturners in Denton, Texas. We meet monthly 7pm the first Monday of each month in the Center for the Visual Arts, located at the corner of Hickory and Belle Streets in Denton. All are welcome!! http://www.goldentrianglewoodturners.org

 

2017 Pen Swap Wrap Up
By: Lynn Lacey
November 07, 2017 · 630 views

We bring this year's Pen Swap to a close with this wrap up video. Feelin Good by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100475 Artist: http://incompetech.com/ Disclaimer: My videos represent how I go about my woodworking. They are for your entertainment and not instruction. My safety is MY responsibility and YOUR safety is YOUR responsibility. Before beginning any woodworking be familiar with your equipment and always - always wear the proper personal protective equipment. When performed safely, woodworking can be fun and rewarding. Keep it fun by working safe.

 

GRWG Demo 2017 10 Bruce Dannenhauer 3 pointed bowl
By: Grand River Wood Turners
October 23, 2017 · 86 views

At our October 2017 meeting Bruce Dannenhauer demonstrates turning a 3 pointed bowl from a cube.

 

GRWG Meeting 2017 10
By: Grand River Wood Turners
October 23, 2017 · 45 views

Grand River Woodturners Guild October Meeting.

 

Artistic Turnings
By: Lee Burkholder
October 17, 2017 · 158 views

Cumberland Valley Wood Turners, wood turning, wood working, lathe, turnings, artistic turnings

 

KCWT Club Demo 10 9 2017 Kris Coyan 2 sided inside out ornament
By: KCWoodturners1
October 17, 2017 · 96 views

KC Woodturner Club monthly meeting demo 10-9-2017. Member Kris Coyan demonstrates making turned Tree Ornaments: 2-sided inside-out method. Location at KCWT clubhouse.

 

KCWT Club Meeting 10-9-2017 Woodturning Challenge and Show and Tell
By: KCWoodturners1
October 17, 2017 · 97 views

Kansas City Woodturners Association regular monthly meeting at the KCWT clubhouse on 10-9-2017. Video of monthly Woodturning Challenge and Show and Tell.

 

 

Monthly Drawings
By: American Association of Woodturners
October 02, 2017 · 847 views

I’d like to tell you about AAW monthly member drawings and your chance to win a Powermatic lathe for yourself and your local chapter to win either a JET 1642 or five JET mini-lathes, donated by Powermatic/jet! Join AAW today!

 

Portland Save the Date
By: American Association of Woodturners
October 02, 2017 · 94 views

Save the date and Experience AAW Portland Sympsoium. The American Association of Woodturners 32nd Annual International Symposium Portland, Oregon June 14-17, 2018

 

KCWT Club Meeting 9 11 2017
By: KCWoodturners1
October 01, 2017 · 57 views

Kansas City Woodturners Association meeting at the KCWT clubhouse on 9-11-2017

 

028-02-03 WWRJF Tool Angles a Club Demo 2 of 3 2017-09-19 - 13min
By: Richard Ford
September 30, 2017 · 90 views

My magic tool cutting angle. Originally Uploaded:- 2017-09-30

 

028-01-03 WWRJF Documentation a Club Demo 1 of 3 2017-09-19 - 10min
By: Richard Ford
September 30, 2017 · 99 views

How and why I Document what I make. it is part of my process.

 

Asociación Argentina de Torneros de madera!! Y otras noticias...
By: KEA Woodturning Studio Hawaii
September 24, 2017 · 517 views

Estaré en Argentina, Buenos Aires el 4 y 5 de Noviembre en Lanus Oeste Con Adam Luna y Mauricio Kolenc en un encuentro de tornería. Ahi se formará la Asociación Argentina de Torneros y ademas hay otro encuentro en Mendoza! Mira el video para mas información.

 

Turning Southern Style 2017
By: Mike Peace Woodturning
September 22, 2017 · 2,252 views

A brief video on Turning Southern Style 2017 woodturning symposium held at the Dalton Convention Center, Dalton GA. This symposium is run by the Georgia Association of Woodturners. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html Here is the link for the Beads of Courage program for woodturners http://www.beadsofcourage.org/pages/woodturners.html

 

Mid-Ohio Valley Pen Turners Gathering Follow Up
By: RJBWoodTurner
September 20, 2017 · 2,501 views

This is not a project video, this is a follow up video from the show. I talk about the show and all the stuff I bought as well as future projects. Regards, Bob Woodpecker’s Landing Exotics – Maple - Burls Benny Ray Watkins, Jr. and Julee McNeill (615) 216-5324 woodpeckerslanding@gmail.com www.facebook.com/woospeckerslanding -------------------------------------------------------- Fred Wissen Designs LLC. Pen Blanks in Acrylic, Polymer Clay and other Unique Materials (757) 641-7423 info@ptownsubbie.com ptownsubbie.com -------------------------------------------------------- Signature Pen Sup

 

E93: YouTube Copyright, Harrogate Show, HS in South Africa and Demos
By: M. Saban Smith Woodturning
September 20, 2017 · 3,102 views

Same as the end of last week really - lots of making waxes and admin stuff going on...but did teach on Monday, registered a YT copyright infringement of one of my thumbnail pictures and have been forward thinking about the huge Harrogate Show in November and building stock levels up! ********************************** Visit my website for Hampshire Sheen, Intrinsic Colours, Witty Turner's Clothing and Gifts, Hints and Tips: http://www.msabansmith.com ********************************** Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com *********************************

 

Drechseltage Neureiter 2017 in Kuchl Andreas auf Achse Folge 1
By: Andreas Achleitner
September 15, 2017 · 3,720 views

Salve! Heute war ich in Kuchl bei den Drechseltagen der Firma Neureiter. Die Hausmesse ist ein absolutes MUSS für jeden Interessierten. Es sind sehr viele Drechsler vor Ort und ein paar Firmen stellen interessante Produkte vor. Die Drechseltage sind vom 15. bis 16. September. Also Morgen wäre noch ein Besuch möglich! In meinen Videos verwende ich folgende Werkzeuge: Fugzwingen http://amzn.to/2BNy3E1 Ponal Holzleim http://amzn.to/2BAprUE Schleifpapier http://amzn.to/2ByYl09 Druckluftschleifer http://amzn.to/2DgSXj4 Bosch PTS 10 Kreissäge http://amzn.to/2pa8Tgh Holzmann VD 1100 Drec

 

E91: Yandles Day 2 - 2x Demo Footage. Fabulous 2 Days!
By: M. Saban Smith Woodturning
September 10, 2017 · 2,979 views

Well....what a brilliant two days the Yandle's show was. Thoroughly enjoyed it. Thanks everyone who came and said hello, bought some bits and (hopefully) enjoyed the demonstrations I did on both days. There are two demos in the video today - one with George Foweraker RPT which is 20 minutes long and the other is a snippet of footage from the demo on my stand this morning. I've been touched by the number of people gathering round to watch all the demos - thank you. Your support means so much. :-) ********************************** Visit my website for Hampshire Sheen, Intrinsic Colours, Wi

 

Comprehensive Woodturning
By: Roger Scott
September 09, 2017 · 49 views

Beginners 14 hour comprehensive woodturning workshop held at FACTUR in Orlando FL. Spindle & faceplate techniques using Easy Wood tools were covered. Projects made were pens, weed pot, pencil holder, lidded box and natural edge bowls. Register here for the next workshop. http://bit.ly/2xGmfQZ

 

E90: Yandles Show Day 1
By: M. Saban Smith Woodturning
September 08, 2017 · 2,051 views

Good day today! Thoroughly enjoyed meeting people, demonstrating for them and generally mingling and networking a bit! More of the same tomorrow. Looking forward to that and yes, I'll video or timelapse one of the demos for you. ********************************** Visit my website for Hampshire Sheen, Intrinsic Colours, Witty Turner's Clothing and Gifts, Hints and Tips: http://www.msabansmith.com ********************************** Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com ********************************** Find Me on Other Social Media Facebook: http://www.facebook.com/msabansmith Twitter: http://www.twitter.com/msabansmith Google : https://plus.google.com/ Msabansmith/ Instagram: https://instagram.com/msabansmith ***********************************

 

E89 Yandles Show pt 1
By: M. Saban Smith Woodturning
September 07, 2017 · 2,670 views

Arrived safely at Yandles in Somerset and eventually got set-up ready for tomorrow. It should be a good show although the weather is looking a little iffy at the moment. ********************************** Visit my website for Hampshire Sheen, Intrinsic Colours, Witty Turner's Clothing and Gifts, Hints and Tips: http://www.msabansmith.com ********************************** Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com ********************************** Find Me on Other Social Media Facebook: http://www.facebook.com/msabansmith Twitter: http://www.twitter.com/msabansmith Google : https://plus.google.com/ Msabansmith/ Instagram: https://instagram.com/msabansmith ***********************************

 

KCWT Meeting Demo 8-7-2017 - Ed Jaszczak Inlays Celtic Knots
By: KCWoodturners1
September 06, 2017 · 329 views

KC Woodturner Club monthly meeting demo 8-7-2017. Member Ed Jaszczak demonstrates making turnings with Celtic knots and other inlay designs. Location at KCWT clubhouse.

 

POV - Dallas Area Woodturners Bowl demo 17Aug2017
By: Tod Raines
August 18, 2017 · 527 views

Produced by Tod Raines on Aug 18, 2017 Dallas Area Woodturners demo at club meeting August 17, 2017. I gave a demo at our club meeting on bowl turning techniques. This video is my POV of the demo. I used a home made iPhone camera mount that hangs around my neck to give this view. I use a wide angle lens and a lav mic. Our turning club records and posts most all the demos to the club YouTube channel here: https://www.youtube.com/channel/UCBZiNA6AU3QrBRX47k4GDAg/feed The club recording of this video can be found here. https://youtu.be/BMNTisXmf0Q Link to Dallas Area Woodturners club website: http://www.dallaswoodturners.com/ Link to bandsaw circle cutting jig plans: https://sawg.org.nz/tipsnjigs/ Visit Woodturning Tool Store to shop for the Elio-DR, DVDs and hollowing cutters. https://woodturningtoolstore.com/prod... Social media links Facebook: https://www.facebook.com/woodturningt... Google : https://plus.google.com/ TodRaines

 

2017 Kansas City Symposium Thank you to all the volunteers!
By: American Association of Woodturners
August 04, 2017 · 107 views

2017 AAW Kansas City Symposium. Thank you to all the awesome volunteers!

 

BIG MAKERS CENTRAL UPDATE! #021
By: Nick Zammeti NZ WoodTurning
August 02, 2017 · 2,272 views

MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ Matt estlea furniture https://www.youtube.com/channel/UCxWzA3ZlYEOLr1JkKH0ZMyg April Wilkerson https://www.youtube.com/user/AprilWilkersonDIY Matt Cremona https://www.youtube.com/user/mcremona Giacomo Di Muro Giaco Whatever https://www.youtube.com/channel/UCYH-XXUE2QDaWKvABsWJh8w MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel

 

#86 Look at all that LOOT!
By: Yuval Lahav Woodturning
July 25, 2017 · 2,295 views

Mostly for those who couldn't make it to the event, I run down a few of the items I bought (no one gifted me anything larger than a pan blank or gave me a discount for a mention or a good review) at UKIWS 2017. We will also do a sticker round if you pull through to the end. Leon Britton : https://www.facebook.com/Wood-You-Believe-It-177551562605290/ Wood you believe it (Also Leon) : https://www.youtube.com/channel/UCrio4PtzSRL2BogLd3R4mdA/videos Brendan McAreavy (baconsoda): https://www.youtube.com/user/baconsoda Charnwood (Viper 3 chuck set): https://www.charnwood.net/ Yorkshire Grit: http:

 

UKIWS 2017 roundup
By: Turning Works
July 23, 2017 · 573 views

This is my personal view of the UK and Ireland Woodturning Symposium in Coventry - July 2017. A bit of waffle at the beginning followed by photos, a walk around the show and a few clips at the end. Enjoy - because we certainly did!! Dave

 

A Unique Night Out With Friends
By: Roger Scott
July 22, 2017 · 48 views

Woodturning, Wine & Pizza A Unique Night Out. Orlando FL. Register here; https://www.eventbrite.com/e/woodturning-wine-pizza-a-unique-night-out-tickets-33196910854

 

American Association of Woodturners - Learn to Turn
By: American Association of Woodturners
July 21, 2017 · 43 views

There's never been a better time to join the AAW. Become a member today and discover your potential with woodturning. Music: 'Life of Riley' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

How to make friends and learn a skill
By: andrew kosnovsky
July 20, 2017 · 1,032 views

Biennial show and competition between members of the Peninsula Woodturners Guild, Frankston, Vic, Australia

 

UKIWS 2017
By: John Clothier
July 18, 2017 · 445 views

Short video of my visit to UKIWS 2017 in Coventry UK

 

Simposio Internacional Torneros de Madera, Mendoza, Argentina, Noviembre 18 y 19, 2017
By: Daniel Vilarino
July 03, 2017 · 2,682 views

Hola amigos y amigas/Hi my friends! Este es un pequeño video promocional para promover el Simposio Internacional de Torneros de Madera que se llevará a cabo en la Ciudad de General Alvear, en la Provincia de Mendoza, en Argentina, los días Sábado 18 y Domingo 19 de Noviembre de 2017. ***This is a short video promoting the International Symposium of Woodturners that will take place in the city of General Alvear, Province of Mendoza, Argentina, on Saturday, November 18 and Sunday, November 19, 2017.*** Para información, por favor contactarse con Emiliano Paredes al siguiente teléfono: 54 9 26

 

E78: Look Back to Kansas City, UKIWS......FIRED UP Now I'm Back!
By: M. Saban Smith Woodturning
June 30, 2017 · 2,455 views

Back from the awesome weekend of the Kansas City AAW Woodturning Symposium. Had such a great time...thank you to everyone who I met for making me so welcome. I'm looking forward to heading back to the next one in Portland, Oregon in June '18 Grit and Sheen Facebook Group: http://www.facebook.com/groups/gritandsheen Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com The UK & Ireland Woodturning Symposium: http://www.ukiws.co.uk *Keep up with my socially!* Facebook: http://www.facebook.com/msabansmith Twitter: http://www.twitter.com/msabansmith Google : https://plus.google.com/ Msabansmith/ Instagram: https://instagram.com/msabansmith

 

June 2017 IKI Meeting - Greg Unfried Demonstrated Turning a Natural Edge Bowl
By: IKI Woodturners
June 22, 2017 · 326 views

June 2017 IKI Meeting - Greg Unfried Demonstrated Turning a Natural Edge Bowl

 

bowl making @ FACTUR
By: Roger Scott
June 18, 2017 · 91 views

Short snippets of students revelling in the joy of woodturning. Register for this workshop NOW. http://bit.ly/2rKqLua

 

KCWT 2017 5 May Liam ONeill D1
By: KCWoodturners1
May 28, 2017 · 377 views

Liam O'Neill turns a bowl from a green wood block at the KC Woodturners clubhouse on May 5, 2017.

 

Utah Woodturning Symposium - Day 3
By: Braxton Wirthlin
May 14, 2017 · 854 views

The final day of the symposium is a bittersweet one. On one hand I'm sad it's over and it'll be a whole year until the next one. But on the other I've got tons of motivation from absorbing all the amazing woodturning knowledge and creativity in one amazing place. I'm pretty sure it's the adult version of how I felt about christmas when I was 8. Enjoy!! Sam Angelo - https://www.youtube.com/user/WYOMINGWOODTURNER braxton@timbermfg.com www.braxtonwirthlin.com Instagram - https://instagram.com/bwirthlin/ twitter - https://twitter.com/bwirthlin facebook - https://www.facebook.com/timbermanufa... Snapchat - braxtonwirthlin

 

Utah Woodturning Symposium - Day 2
By: Braxton Wirthlin
May 13, 2017 · 1,031 views

Great day today, Amazing demos, ordered some cool stuff, had a great time at the banquet and watching all the action in the live auction. Stay tuned for the final day tomorrow! braxton@timbermfg.com www.braxtonwirthlin.com Instagram - https://instagram.com/bwirthlin/ twitter - https://twitter.com/bwirthlin facebook - https://www.facebook.com/timbermanufa... Snapchat - braxtonwirthlin

 

What's a Woodturning Club and How Do I Find One?
By: Mike Peace Woodturning
May 12, 2017 · 1,575 views

I explain the many advantages of belonging to a woodturning club and how to find one near you. I direct you to the American Association of Woodturners website for resources that could help you find or start one http://www.woodturner.org/ You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Utah Woodturning Symposium - Day 1
By: Braxton Wirthlin
May 12, 2017 · 984 views

Day 1 of the symposium is over. I saw some amazing demos, sold and traded some wood, made some new freinds, and caught up with old ones. Tomorrow should be just as awesome! www.wtapodcast.com braxton@timbermfg.com www.braxtonwirthlin.com Instagram - https://instagram.com/bwirthlin/ twitter - https://twitter.com/bwirthlin facebook - https://www.facebook.com/timbermanufa... Snapchat - braxtonwirthlin

 

2017 Utah Woodturning Symposium - Arrival Day
By: Braxton Wirthlin
May 11, 2017 · 557 views

I arrived in Provo Utah today for the 2017 Utah Woodturning Symposium. Dropped off a few things to the gallery, checked out a quick demo, then went to the pen turners rendezvous. Keep an eye out of my Instagram for lots of fun stuff daily.

 

Video As the Wood Turns
By: robohippy
April 24, 2017 · 3,880 views

Thanks to Mid-Valley Media Group for the great coverage at the show. More than 300 woodturners from throughout Oregon, Washington, Idaho, Montana and California are showing their skills this weekend during the second annual Oregon Woodturning Symposium, which began Friday at the Linn County Fair & Expo Center.

 

GRWG Demo 2017 04 Ron Campbell Hollowing
By: Grand River Wood Turners
April 20, 2017 · 117 views

The Grand River Wood Turners Guild is located in Grand Rapids MI. We meet on the 3rd Saturday of each month. The demonstration this month was 'Hollowing' with Ron Campbell. Find us on Facebook: https://www.facebook.com/Grand-River-Wood-Turners-Guild

 

GRWG Meeting 2017 04
By: Grand River Wood Turners
April 18, 2017 · 24 views

The Grand River Wood Turners Guild is located in Grand Rapids MI. We meet on the 3rd Saturday of each month. This is our April 2017 general meeting. Find us on Facebook: https://www.facebook.com/Grand-River-Wood-Turners-Guild

 

ATLANTA WOODWORKING EVENT 2017 VLOG!
By: Nick Zammeti NZ WoodTurning
April 07, 2017 · 3,934 views

This Vlog is we did here is for the Atlanta 2017 Woodworking show. with a Home Alone Twist. We hope you enjoy it..... Atlanta Woodworking Show http://www.thewoodworkingshows.com/atlanta.html SHOUT OUTS TO ALL THE MAKERS I CAN REMEMBER, SORRY IF I HAVE FOGETTEN SOME OF YOU... MY LITTLE BOYS CHANNEL (CHARLIES QUICKYSLOW LIFE) https://www.youtube.com/channel/UCGu_t2ciTXzBebPxf2cwfCQ IZZY SWAN https://www.youtube.com/user/rusticman1973 IJESSUP https://www.youtube.com/channel/UCYqp3_iQYErWMi3VsVT5xzA HEATH KNUCKLES https://www.youtube.com/channel/UC7ymj9d5HO-sLh2AnyILAiQ CARL JACOBSON htt

 

Atlanta Woodworking Show 2017
By: Mike Peace Woodturning
April 03, 2017 · 3,201 views

Here is a view of the Atlanta Woodworking Show through the eyes of a woodturner and YouTube Creator, Mike Peace. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Badger woodturners April demo
By: Eric Godwin
March 26, 2017 · 40 views

Here is an advertisement for April 2017 demo, Butch & Cyndi are going to show us some helpful tips to help us woodturners around our shop. Butch is behind the camera and the meeting will start at 6:30pm, you are welcome at 6:00pm.

 

2017 Southern States Woodturning Symposium
By: Mike Peace Woodturning
March 12, 2017 · 1,515 views

A few scenes from the woodturning symposium held in Cartersville, GA Mar 10-12, 2017. Regional woodturning symposiums like Southern States are a great opportunity to watch great demonstrators and learn more about woodturning. You also have a great opportunity to by wood and tools from a large number of vendors. This is one of two regional symposiums in North Georgia. The next one is Turning Southern Style held in Dalton, GA Sep 15 -17, 2017. Check out their info at http://events.r20.constantcontact.com/register/event?oeidk a07edn9gitzf2a4eb58&llr 9atcwcjab You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Nick Agar woodturning at Malmsten Furniture Studies – 60 sec ROCK VERSION
By: Tormek Sharpening Innovation
March 11, 2017 · 1,974 views

SHORT ROCK VERSION: Nick Agar, Tormek friend and professional woodturner from Devon, UK, holding a woodturning workshop for students and staff at Carl Malmsten Furniture Studies in Stockholm, Sweden. Sharp tools matters. See the full version: https://www.youtube.com/watch?v 3Q5hMz1vY_U&t 6s Read more about how to sharpen your woodturning tools with Tormek: https://www.tormek.com/international/en/user-categories/woodturning

 

Woodturning the Salem Film Festival 2017 Best Storyteller Award
By: Boston Woodturning
March 01, 2017 · 1,569 views

Woodturning the Salem Film Festival 2017 Best Storyteller Award. Maple vase 12Tx6w with two carved spirals and mother of pearl pinstripes represents a film reel unraveling.

 

Sequoia Woodturners Club Challenge
By: Jeremy Edwards
February 21, 2017 · 11,650 views

In this video i used a skateboard that i recently snapped at a skatepark and some Lignum Vitae. The club challenge was to make an egg since Easter is right around the corner. I do believe that Jesus Christ came here for all of our salvation. Thank you Jesus for your life, Death and Resurrection.

 

Promo for Australian Wood Turning Exhibition
By: Brendan Stemp
February 12, 2017 · 2,671 views

An event I fully support. Here is a link to their website: http://awtex.com.au

 

#9 Herramienta Casera (Brazo Articulado) y Encuentros de Torneros de Madera
By: Fernando Balsells
February 04, 2017 · 2,799 views

Encuentro Regional Zona Patagonia 15 y 16 Abril 2017 Tel: 02302-15300098 Encuentro Regional Litoral 29 Abril al 1 Mayo Tel: 03413499791

 

Invitación a un importante encuentro de torneros de madera en Argentina
By: TORNEANDO MADERA CON MARIO CANTARUTTI
January 31, 2017 · 1,970 views

 

woodturning #60 MIM 'Bo Peep'
By: Woodslee Summercraft
January 29, 2017 · 1,756 views

This video and project was created as part of a collaboration between 22 talented makers across the world. The purpose of this collaboration is to raise awareness to the hardship and difficulties families and children face every day when it comes to the disability and/or sickness of a child/children. Every country in the world struggles to give the support both financially and physically that families with sick and disabled children desperately need. Steven Twydell set up a campaign on the back of this amazing collaboration to help raise funds for children’s Charities around the world. The ca

 

Encuentros de Torneros Woodturners Symposiums Argentina
By: Daniel Vilarino
January 29, 2017 · 1,309 views

Información sobre los Encuentros ***Information about the Symposiums*** Encuentro en/symposium in General Pico, La Pampa, Argentina 15 y 16 de Abril de 2017 Llamar/Call: desde/from Argentina: 0230215300098 desde fuera de/from outside Argentina: 005492302300098 Encuentro en/symposium in Carcaraña, Santa Fé, Argentina 29 de Abril al 1ro de Mayo, 2017 Llamar/call: desde/from Argentina: 0341153499791 desde fuera de/from outside Argentina: 005493413499791 https://www.facebook.com/groups/718755628164310 Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle

 

Encuentro de torneros de la madera en Argentina 2017
By: Miguel Sanchez
January 28, 2017 · 4,933 views

29 de Abril al 01 de Mayo. Parque Sarmiento, Carcarañá, Santa Fe Tel: 0341 3499791 Hablemos de torneado / Lets talk about woodturning: https://www.youtube.com/channel/UC2JiORNXY4uz2wg3hL1oLHA Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez http://www.tornoartesano.es mailto:miguel@tornoartesano.es

 

Encuentro de torneros de la madera en Argentina 2017
By: Miguel Sanchez Woodworks
January 28, 2017 · 718 views

29 de Abril al 01 de Mayo. Parque Sarmiento, Carcarañá, Santa Fe Tel: 0341 3499791 Canal principal con Proyectos cada Martes: Main channel with new projects every Tuesday: https://www.youtube.com/user/Drizztss Ayuda al canal desde 1 dolar al mes: Help de channel from as little as 1 dollar per month http://www.patreon.com/miguelsanchez www.tornoartesano.es miguel@tornoartesano.es

 

GRWG Demo 2017 01 Dustless Oil Sanding
By: Grand River Wood Turners
January 26, 2017 · 42 views

Jeff Grill demonstrates dustless sanding with oil. The Grand River Wood Turners Guild is located in Grand Rapids MI. We meet on the 3rd Saturday of each month. Contact us on our website: http://www.grwtg.org/ Or find us on Facebook: https://www.facebook.com/Grand-River-Wood-Turners-Guild

 

GRWG Meeting January 2017
By: Grand River Wood Turners
January 24, 2017 · 25 views

The Grand River Wood Turners Guild is located in Grand Rapids MI. We meet on the 3rd Saturday of each month. Contact us on our website: http://www.grwtg.org/ Or find us on Facebook: https://www.facebook.com/Grand-River-Wood-Turners-Guild

 

Badger Wood Turners February 2017
By: Eric Godwin
January 10, 2017 · 135 views

This is a little advertisement for the February 2017 meeting featuring Brent English. In next month meeting he is going to go over how to maintain your lathe. The meeting is at West High school, starts at 6:30.

 

Time to woork TWWS
By: The Studios of Bradley R.M. Woodturning
January 01, 2017 · 43 views

This is a short single camera angle clip from The Woodworking Shows 2016.

 

Hawaii's Woodshow Masters 2016
By: Andy Cole
December 26, 2016 · 88,451 views

Video interview featuring the the Hawaii's Woodshow Masters division of 2016 participating artists. Learn more about the Hawaii's Woodshow at http://woodshow.hawaiiforest.org/ .

 

Carving a Pleasing Form
By: Hiawatha Woodturning Club
December 23, 2016 · 51 views

This video is two part video about 'Carving a Pleasing Form'. It was video taped at a meeting of the Hiawatha Woodturning Club in Moran Michigan, Gary Weiermiller first gave a talk about the steps needed to turn a pleasing form. Following that Gary turned a small vase on the club lathe. The talk is Part I and turning the vase will follow in Part II

 

WWGOA Live: December 2016
By: WoodWorkers Guild Of America
December 08, 2016 · 5,795 views

Winter has taken hold in the north, making it a great time to be in the shop. But when isn’t it great to be in the shop? Enjoy our December Live, and have a great holiday season. 0:20 Welcome to WWGOA Live 0:35 The guitar George is making 3:15 Air drying vs kiln drying. Advantages/disadvantages 6:15 Top coating over Mylands Friction Polish 8:10 Perfect 45 degree cuts on the table saw 16:13 Forcing boards straight in a glue up 17:10 Router lift in a router table 21:18 Drywall screws vs wood screws 27:23 Christmas joke 28:40 Flattening boards on a planer 31:41 Using up wood scraps 3

 

GRWT Nov 2016 Bowl Gouge Pt3 demo
By: Grand River Wood Turners
December 07, 2016 · 22 views

The Grand River Wood Turners Guild is located in Grand Rapids MI. We meet on the 3rd Saturday of each month. Contact us on our website: http://www.grwtg.org/ Or find us on Facebook: https://www.facebook.com/Grand-River-Wood-Turners-Guild

 

GRWT 2016 November meeting
By: Grand River Wood Turners
December 05, 2016 · 14 views

The Grand River Wood Turners Guild is located in Grand Rapids MI. We meet on the 3rd Saturday of each month. Contact us on our website: http://www.grwtg.org/ Or find us on Facebook: https://www.facebook.com/Grand-River-Wood-Turners-Guild

 

#8 Primer Encuentro Latinoamericano de Torneros de Madera
By: Fernando Balsells
December 04, 2016 · 633 views

#8 Primer Encuentro Latinoamericano de Torneros de Madera

 

Invitacion al Primer Encuentro Latino Americano de Torneros de Madera - Argentina
By: Arte en Torno
November 09, 2016 · 2,304 views

Primer encuentro latino americano de torneros de madera Se realizará en General Alvear-Mendoza-Argentina Los días 26 y 27 de noviembre de 2016 Organizador. Emiliano Paredes Informes. WhatsApp. 0261- 155125887 Auspiciadores. American Association Of Woddturners (AAW) Asociación Americana de Torneros (EEUU) Turners Without Borders (TWB) Torneros sin fronteras (EEUU) Amigos por el torno de madera (APTM) Grupo de Facebook Municipalidad de General Alvear - Mendoza

 

Festival of Creative Crafts & Mammoth Quick Draw 2016 (A shout-out with Sam)
By: WYOMINGWOODTURNER
November 07, 2016 · 1,972 views

Sam draws attention to two local craft/art events in Worland, Wyoming. Find out more about the Festival of Creative Crafts and the Mammoth Quick Draw. 2016 e-mail Sam at samandcheryle@gmail.com with questions Quick Draw link: http://www.washakiemuseum.org/mammoth-quick-draw.html

 

GRWT Oct 2016 Bowl Gouge pt 2 Demo
By: Grand River Wood Turners
October 31, 2016 · 84 views

Description

 

GRWT 2016 October meeting
By: Grand River Wood Turners
October 31, 2016 · 18 views

The Grand River Wood Turners Guild is located in Grand Rapids MI. We meet on the 3rd Saturday of each month. Contact us on our website: http://www.grwtg.org/ Or find us on Facebook: https://www.facebook.com/Grand-River-Wood-Turners-Guild

 

Women in Turning - Atlanta
By: Gwinnett Woodworkers
October 25, 2016 · 2,599 views

Peg Schmid, Regional Ambassador for Women In Turning (WIT), demonstrates woodturning. WIT is dedicated to encouraging and assisting women in their pursuit of turning, to sharing ideas and processes to further members’ skills and creativity, and to increasing participation of women in the field of woodturning. This presentation took place May 2016 at Peachtree Woodworking Supply in Atlanta with video support from Gwinnett Woodworkers. Click here for the American Association of Woodturners (AAW) website: http://www.woodturner.org Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

UKIWS 2017 & The Black Dog Workshop Latest!
By: Mike Waldt
October 22, 2016 · 3,725 views

UKIWS - YouTube Channel https://www.youtube.com/watch?v E3KARshksTs UKIWS Facebook Page - https://www.facebook.com/ukiws/ The Black Dog Workshop YouTube - https://www.youtube.com/watch?v wQaWsTA5hdI The Black Dog Workshop Facebook https://www.facebook.com/blackdogworkshopuk

 

IKI WoodTurners Oct. 9th 2016 Demo - Texturning Tools
By: IKI Woodturners
October 17, 2016 · 484 views

Dan Davis and Brian Harts demonstrate several different texturing tools.

 

woodturning demonstration
By: Harry’s Woodcraft
October 09, 2016 · 30,821 views

on Saturday 1 October 2016 I attended a woodturning demonstration at Axminster tools Warrington, with the professional woodturner Steve Heeley, Steve himself is a smashing bloke Very very helpful, and He gave a great demonstration and some very helpful tips and information on wood turning, I enjoyed the demonstration by Steve, And I also had a good look around the store, And a chat to the staff who wear also very helpful And knowledgeable, So all in all it was a good day. I took the camera with me, and took a few stills and a little bit of footage Which i thought you might like to look at,

 

woodstock woodshow 2016
By: Woodslee Summercraft
October 03, 2016 · 2,930 views

A quick tour of Woodstock Woodshow 2016, this Year was a great show for all woodcrafters, set to new original music by Chris Bolister. If you haven't been yet I highly recommend it.Woodstock Ontario 1st weekend in October annually To purchase Hampshire sheen and Yorkshire Grit Visit http://www.woodsleesummercraft.ca/ Music copyrighted by Chris Bolister https://m.facebook.com/chris.bolister

 

2016MidAtlanticWoodturningSymposiumInstantGallery
By: Jeffrey Schnell
October 03, 2016 · 1,600 views

2016 Mid Atlantic Woodturning Symposium Instant Gallery

 

October Show N Tell
By: Southplains Woodturners
October 03, 2016 · 83 views

2016 October Show N Tell

 

GRWT Demonstration Bowl Gouge pt 1 Demo
By: Grand River Wood Turners
September 29, 2016 · 99 views

The Grand River Wood Turners Guild is located in Grand Rapids MI. We meet on the 3rd Saturday of each month. The demonstration this month is part 1 of a three part series on the 'Bowl Gouge'. Contact us on our website: http://www.grwtg.org/ Or find us on Facebook: https://www.facebook.com/Grand-River-Wood-Turners-Guild

 

GRWT Sept 2016 meeting
By: Grand River Wood Turners
September 26, 2016 · 21 views

The Grand River Wood Turners Guild is located in Grand Rapids MI. We meet on the 3rd Saturday of each month. Highlights this month include a “Shallow Bowl” challenge. Contact us on our website: http://www.grwtg.org/ Or find us on Facebook: https://www.facebook.com/Grand-River-Wood-Turners-Guild

 

Meat and Potatoes Turning Club Demo
By: IKI Woodturners
September 22, 2016 · 235 views

Indiana, Kentucky, Illinois Wood Turners Club Meeting for September 11th 2016. David Brazelton demonstrates The Process Of Learning To Turn.

 

Simposio de las montañas rocosas 2016 en vivo
By: Adam Woodturner
September 16, 2016 · 55 views

Simposio de las montañas rocosas 2016 vendedores y galería de piezas

 

Simpsio de las montañas rocosas 2016
By: Adam Woodturner
September 16, 2016 · 41 views

Vista de vendedores en el simposio de torneros 2016

 

Exposición Primer Semestre 2016
By: TORNEANDO MADERA CON MARIO CANTARUTTI
September 05, 2016 · 3,490 views

 

Greenvill Woodturning (Phillip Darvill)
By: Greenvill Woodturning
September 03, 2016 · 224 views

Links to useful sites: Crown Woodturning Tools : http://amzn.to/2buWtd2 Woodturning lathes: http://amzn.to/2bK5EVV Friction Polish: http://amzn.to/2c9nGQw Sanding Sealer: http://amzn.to/2bTixKu Woodturners Safety Cloth: http://amzn.to/2bK6mlH Face Shield: http://amzn.to/2c9pk4S

 

Talking Turning & Tea - Episode 7 - the village show and shoutouts
By: Blind Woodturner
September 01, 2016 · 644 views

Guess what! I won at the village show! *** Join me, Chris Fisher, the Blind Wood Turner, in my workshop. I started out in life as a regular guy, working in auto body repair at BMW, until one day, completely out of the blue, a rare virus (Toxoplasmosis) reared its ugly head and caused me to lose my sight in a matter of weeks. Despite the challenges of coming to terms with losing my sight, I refused to give up and, after four years I decided to take up woodturning so that I could make myself a vampire stake – I’m a huge horror film fan! While every day is still a challenge, these challenges

 

UKIWS 2016 Review & Purchases
By: Jake Webb
September 01, 2016 · 151 views

Just a brief review of this years UKIWS event. Sorry it's been a little while coming but this summer has been really busy with non woodturning projects. My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

Woodturning SWAT 2016
By: The Woodshop
August 31, 2016 · 1,877 views

Links to websites and YT channels, SWAT-http://www.swaturners.org/ AAW-http://www.woodturner.org/ Cap'n Eddie Castelin-https://www.youtube.com/user/capneddie Ruth Niles-http://nilesbottlestoppers.com/ Doug Thompson-http://thompsonlathetools.com/ Craig-http://www.chefwarekits.com/ Ken-http://woodturnerswonders.com/ Brent-http://www.turnrobust.com/ Tim Yoder-https://www.youtube.com/user/woodturningwithtim1 Donny Carter-https://www.youtube.com/channel/UCBwjvR2tfV0bQG8XyNbTM3g Shown wortheffort-https://www.youtube.com/user/wortheffort Rebecca DeGroot-https://www.youtube.com/channel/UCcw42XS1mtwQB

 

GRWT July 2016 meeting
By: Grand River Wood Turners
August 15, 2016 · 57 views

The Grand River Wood Turners Guild is located in Grand Rapids MI. We meet on the 3rd Saturday of each month. Contact us on our website: http://www.grwtg.org/ Or find us on Facebook: https://www.facebook.com/Grand-River-Wood-Turners-Guild

 

GRWT June 2016 Shallow Bowl demo
By: Grand River Wood Turners
August 14, 2016 · 184 views

Jeff Grill doing a demonstration on making a shallow bowl.

 

GRWT June 2016 meeting
By: Grand River Wood Turners
August 12, 2016 · 15 views

The Grand River Wood Turners Guild is located in Grand Rapids MI. We meet on the 3rd Saturday of each month. Contact us on our website: http://www.grwtg.org/ Or find us on Facebook: https://www.facebook.com/Grand-River-Wood-Turners-Guild

 

KCWTBrianPaulk1
By: KCWoodturners1
August 08, 2016 · 252 views

Brian Paulk demonstrates woodturning using inlay in pens and shaving brush handles. Demo at the KC Woodturners clubhouse on 7-9-2016.

 

WWGOA LIVE: July 2016
By: WoodWorkers Guild Of America
July 27, 2016 · 6,319 views

Thanks for watching, and providing all your great questions. The Live streams are a lot of fun. From table saw to planer to hand cut mortises, we covered a lot of ground. 0:40 George’s bad joke 1:25 Kauri Wood 5:12 Cutting mortises. Hand cut techniques 10:12 Allowing for wood movement in solid panels 13:36 Sanding sealer vs. dewaxed shellac 14:50 Tung oil-Sand between coats? 16:00 Avoiding table saw kick back 20:00 Track saw or stationary tools 22:35 What size SawStop? 24:06 Imported plywood and frameless cabinets 26:50 3D carving on CNC machines 28:57 Boring for Euro hinges 31:5

 

Hands On Retreat 2016
By: Grand River Wood Turners
July 27, 2016 · 126 views

Recorded on June 24, 2016 at Ron Campbell’s residence in Cedar Springs, MI. Location of the “Hands On Retreat”. For more information on the retreat feel free to contact Ron at campbelnye@gmail.com

 

Show and Tell from July 21
By: Lincoln Land Woodturners
July 23, 2016 · 23 views

 

LLWW 2016 Pen Swap Conclusion
By: Lynn Lacey
July 15, 2016 · 428 views

Today we wrap up what was a fun and entertaining pen swap between 48 people from Australia to Canada to Switzerland. Thanks everyone who participated. Here is the link to the Pen Swap Play list - https://www.youtube.com/playlist?list PLqhhB9PS87yZXnw4vFXntLjDssjLDbz20 Instagram @LL_woodworks Facebook https://www.facebook.com/LL-Woodworks-397970183658553/ Web Site - www.ll-woodworks.net

 

Wood Turning - A flavour of UKIWS and My Disaster Demo!
By: Mike Waldt
July 03, 2016 · 7,907 views

A pictorial flavour of UKIWS, and my disaster one hour demo, edited down to about 3 minutes :)

 

A Taste of UKIWS 2016 and Thanks
By: Jim Overton - Jimson's Stuff
June 26, 2016 · 1,615 views

Hello , my name is Jim Overton. This is a short video to thank everybody involved with UKIWS 2016 at Coventry. www.ukiws.co.uk A project video coming in the next couple of days Thanks for watching Cheers, Jim

 

UKIWS 2016
By: Ian Maude
June 21, 2016 · 1,673 views

A quick thank you and what I got at UKIWS 2016!

 

2016 AAW Symposium With Music
By: Jeffrey Schnell
June 21, 2016 · 281 views

This are the pictures I took at the 2016 AAW Symposium with Music.

 

Northwest Washington Woodturners Club Demo.
By: The Woodshop
June 20, 2016 · 1,712 views

Thanks for all the help finding the right sand for the pendulum. I wanted to thank the NWW for having me up for a club demo and class Thursday, and Friday. Then it was off to Woodcraft for a box turning class Saturday. Northwest Washington Woodturners http://www.nwwwt.org/ Northwest Woodturners https://nwwt.wildapricot.org/ Josh's Channel https://www.youtube.com/channel/UCM4H4M4vCHPv12FLP9qgwBw/featured Replacement Sand for Pendulum http://astore.amazon.com/thewood0c-20/detail/B009P8BACA I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c

 

#81. BIG THANKS TO UKIWS
By: Keith Barrow
June 18, 2016 · 2,295 views

Just got back,and simply had to do this very short video.

 

Back from Atlanta: 2016 AAW Symposium... Woodturning with Sam Angelo
By: WYOMINGWOODTURNER
June 18, 2016 · 3,535 views

Sam is back from the 2016 AAW symposium In Atlanta, Georgia.He mentions some world class turnings with information that might help YOUR turning. Plus, lots of footage of Coco.

 

AAW symposium breaking the rules 1
By: The Studios of Bradley R.M. Woodturning
June 17, 2016 · 1,560 views

This video is a 17 minute excerpt from a 2 hour seminar that I teach during The Woodworking Shows in cities all across the U.S. I created this short version as a free promotional piece that I gave away at the American Association of Woodturners symposium in June 2016.

 

wood turning # 45 update
By: Woodslee Summercraft
June 15, 2016 · 953 views

A brief update and UKIWS

 

2016 AAW Symposium
By: Jeffrey Schnell
June 14, 2016 · 1,054 views

These are the pictures I took of the instant gallery Sunday morning. Sorry about only about half of them were there and were suppose to be till 100. Hope you enjoy them.

 

AAW 2016 Symposium Highlites
By: Mike Peace Woodturning
June 13, 2016 · 2,572 views

This is just a highlights reel to show some of the sights and sounds from the 30th Annual AAW Symposium just held in Atlanta. It includes some quickie interviews with John Lucas, Robo Hippy and others.

 

Woodturning Cryptex Club Demo
By: The Woodshop
June 13, 2016 · 1,969 views

I have a club demo Thursday for the NWWW in Mt Vernon Wa. I'm demonstrating how to make a cryptex. I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking videos My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com I'm a Robust dealer if you have any questions I'd be more than happy to help. jacobson68@yahoo.com Robust Wood

 

UKIWS Final Video Update
By: M. Saban Smith Woodturning
June 08, 2016 · 1,561 views

Filmed late on 7th June, here's a long FINAL video update about UKIWS! Loads has been going on, and for the most part, the news is much more than good. Here are the links I mention: Entry Tickets: http://www.ukiws.co.uk/tc-events/ukiws/ Master Classes: http://www.ukiws.co.uk/tc-events/master-classes/ People's Choice Award: http://www.ukiws.co.uk/category/competition/ Comp Prize Donors: Oliver's Woodturning: http://www.oliverswoodturning.co.uk Glenn Teagle: http://www.ukwoodcraftandcarbidechisels.co.uk/ ISCA Woodcrafts: http://www.iscawoodcrafts.co.uk/ Sponsors: Oliver's Woodturning: http://www.oliverswoodturning.co.uk Taylors Mirfield: http://www.taylorsmirfield.co.uk DalmannUK: http://www.dalmannuk.com Hampshire Sheen: http://www.hampshiresheen.com Axminster Tools and Machinery: http://www.axminster.co.uk We also need to mention James Barry Sharpening Solutions for his generosity: http://www.beaverbushcraft.co.uk

 

GRWT May 2016 Demo
By: Grand River Wood Turners
June 08, 2016 · 65 views

At our May 2016 meeting Tom Sampson did a demonstration on the basic cuts and techniques of the skew.

 

GRWT May 2016 meeting
By: Grand River Wood Turners
June 08, 2016 · 28 views

Grand River Wood Turners May Meeting Video includes Doug Brinks, Jeff Grill, Ron Campbell, Ken Blain and various members during 'Show & Tell'.

 

UK & Ireland Woodturning Symposium - Only 3 Weeks To Go!!!!!
By: Mike Waldt
May 29, 2016 · 2,254 views

Time is running out to book tickets for the first ever UK & Ireland woodturning symposium, that is taking place in Coventry on the 18th 1nd 19th of June. We have amazing professional demonstrators, a fantastic raffle with huge prizes, the spirit of turning competition with even bigger prizes .. not to mention the brilliant line up of trade stands !!! book your entry tickets here :- http://www.ukiws.co.uk/tc-events/ukiws/ book your professional master class tickets here :- http://www.ukiws.co.uk/tc-events/mast... Enter the spirit of turning competition here :- http://www.ukiws.co.uk/competition/ Raffle tickets are available on both days of the event !!! Like our Facebook page to be able to keep up with the updates !! click here :- https://www.facebook.com/ukiws/?ref b... Book your tickets now, this is an event not to be missed !!! This video was created by Steve Twydell of Templeboy Turnings: https://www.youtube.com/channel/UCM0Ui4ri5LLJvopaMT-SR5w Thanks Steve :)

 

UK & Ireland Woodturning Symposium only 3 week to go !!!
By: Templeboy Turnings
May 29, 2016 · 649 views

Time is running out to book tickets for the first ever UK & Ireland woodturning symposium, that is taking place in Coventry on the 18th 1nd 19th of June. We have amazing professional demonstrators, a fantastic raffle with huge prizes, the spirit of turning competition with even bigger prizes .. not to mention the brilliant line up of trade stands !!! book your entry tickets here :- http://www.ukiws.co.uk/tc-events/ukiws/ book your professional master class tickets here :- http://www.ukiws.co.uk/tc-events/master-classes/ Enter the spirit of turning competition here :- http://www.ukiws.co.uk/competition/ Raffle tickets are available on both days of the event !!! Like our Facebook page to be able to keep up with the updates !! click here :- https://www.facebook.com/ukiws/?ref bookmarks Book your tickets now, this is an event not to be missed !!!

 

Sorby Demo May 2016
By: Northcoast Woodturners
May 22, 2016 · 833 views

Jeff Farris Provides a demonstration of a number of Robert Sorby tools to the Northcoast Woodturners

 

2016 Utah Woodturning Symposium Day 3
By: Braxton Wirthlin
May 15, 2016 · 2,211 views

2016 Utah Woodturning Symposium Day 3 is over. This whole experience has been totally mind blowing. I am filled with so many ideas, and so much inspiration. I can't wait to get home and start turning! braxton@timbermfg.com Instagram - https://instagram.com/bwirthlin/ twitter - https://twitter.com/bwirthlin Timber Manufacturing http://www.timbermfg.com Instagram - https://instagram.com/timbermfg twitter - https://twitter.com/timbermfg - - - - - - Please watch: 'Olive Branch Bowl' https://www.youtube.com/watch?v iIp6QYBSU0c - - - - - -

 

2016 Utah Woodturning Symposium Day 2
By: Braxton Wirthlin
May 14, 2016 · 1,659 views

2016 Utah Woodturning Symposium Day 2. Another great one today! Caught a couple demonstrations, then did a little exploring around Provo. The internet sucks at the Days Inn in Provo hahaha. braxton@timbermfg.com Instagram - https://instagram.com/bwirthlin/ twitter - https://twitter.com/bwirthlin Timber Manufacturing http://www.timbermfg.com Instagram - https://instagram.com/timbermfg twitter - https://twitter.com/timbermfg - - - - - - Please watch: 'Olive Branch Bowl' https://www.youtube.com/watch?v iIp6QYBSU0c - - - - - -

 

2016 Utah Woodturning Symposium Day 1
By: Braxton Wirthlin
May 13, 2016 · 1,978 views

2016 Utah Woodturning Symposium Day 1 was AWESOME! Cant wait for tomorrow! braxton@timbermfg.com Instagram - https://instagram.com/bwirthlin/ twitter - https://twitter.com/bwirthlin Timber Manufacturing http://www.timbermfg.com Instagram - https://instagram.com/timbermfg twitter - https://twitter.com/timbermfg - - - - - - Please watch: 'Olive Branch Bowl' https://www.youtube.com/watch?v iIp6QYBSU0c - - - - - -

 

Amigos por el Torno Promo y Reto de Mayo
By: Daniel Vilarino
May 05, 2016 · 2,723 views

Hola/Hi! ***This video is in Spanish, if you want to watch it in English, please click in the following link:*** https://youtu.be/KBznFawPrVI Este video está en Español. En este video promuevo el Grupo de Facebook 'Amigos por el Torno de Madera' y también el Desafío del Mes de Mayo. ***In this video I promote the Facebook Group 'Friends because of the Wood Lathe' and also the Monthly Challenge for May. El siguiente es el enlace al grupo en Facebook: ***The following is the link to the Facebook group:*** https://www.facebook.com/groups/718755628164310/ El siguiente es el correo electrónico

 

E38 - Short and Sweet - Running Out of Time!
By: M. Saban Smith Woodturning
April 29, 2016 · 1,326 views

Crazy week this week and have run out of time, so this episode was filmed on Thursday 28th ahead of a day with local pro turner Les Thorne. Heads up for Wednesday - we'll be turning a cork fitter bottle stopper, so if you want to join the fun, grab some of the cork attachments shown in the video from one of the many retailers that stock them! At http://www.msabansmith.com, you can read more about my projects, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list and a membership scheme where you can help m

 

GRWT April 2016 demo
By: Grand River Wood Turners
April 21, 2016 · 24 views

Jim Jakosh demonstrates his custom made sphere jig.

 

GRWT April 2016 meeting
By: Grand River Wood Turners
April 21, 2016 · 22 views

The Grand River Wood Turners Guild is located in Grand Rapids MI. We meet on the 3rd Saturday of each month. Contact us on our website: http://www.grwtg.org/ Or find us on Facebook: https://www.facebook.com/Grand-River-Wood-Turners-Guild

 

UKIWS Update: 14 April
By: M. Saban Smith Woodturning
April 14, 2016 · 753 views

A few important dates for your diaries on the run up to the event which is an exciting 8 weeks away! *** Spirit of Turning Competition Closes 1st May *** *** Master Class Ticket Booking Deadline: 30th April *** Please visit http://www.ukiws.co.uk to book your tickets to avoid disappointment! Also, please visit our sponsors: Oliver's Woodturning: http://www.oliverswoodturning.co.uk Taylor's Mirfield: http://www.taylorsmirfield.co.uk Axminster Tools and Machinery: http://www.axminster.co.uk Dalmann UK: http://www.dalmannuk.com Hampshire Sheen: http://www.hampshiresheen.com

 

Sights and Sounds of the 2016 Atlanta Woodworking Show
By: Gwinnett Woodworkers
April 12, 2016 · 2,617 views

The Gwinnett Woodworkers have a major presence each year when The Woodworking Show comes to Atlanta. At this show we take pictures of attendees and turn them into scroll saw tray puzzles. We also turn spinning tops for children and adults. Recorded and presented in HD 04-002-2016 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Totally Turning 2016 Woodworking Northeastern Woodworkers Association
By: Jeffrey Schnell
April 09, 2016 · 682 views

Totally Turning 2016 Woodworking Northeastern Woodworkers Association

 

UKIWS Latest!
By: Mike Waldt
April 08, 2016 · 2,250 views

The very latest news regarding UKIWS - UK & Ireland Woodturning Symposium UKIWS - http://www.ukiws.co.uk/ UKIWS Competition - http://www.ukiws.co.uk/competition/ Oliver's Woodturning: http://www.oliverswoodturning.co.uk Taylor's Mirfield: http://www.taylorsmirfield.co.uk Axminster Tools and Machinery: http://www.axminster.co.uk Dalmann UK: http://www.dalmannuk.com Hampshire Sheen: http://www.hampshiresheen.com

 

Totally Turning 2016
By: Jeffrey Schnell
April 03, 2016 · 1,125 views

Totally Turning 2016

 

Cutting Wood on A Wooden Scroll saw to be Turned on A Wooden Lathe
By: Andrew Chen
March 31, 2016 · 52 views

Wee were instructed to leave the wooden lathe out after everything else was packed up for the closing ceremony for the World Wood Day 2016 celebrations. Many locals still came to check it out before and after the closing ceremony and wanted to watch it work. We were out of wood and were scrounging around for wood because we had used up all the suitable wood. I found this piece of rock maple but it had to be cut to fit on the lathe. All the woodworking tools were packed up but I remembered seeing this wooden scroll saw and noticed from a distance that it was still there. So, I cut the piece to the proper size without checking with the owner. I want to thank and apologize to Ayman Mohamed Ahmed Hassen Elsaadani for using his scroll saw without his permission.

 

Woodturning Demo at 2016 WWD Celebrations in Kathmandu, Nepal (4)
By: Andrew Chen
March 31, 2016 · 238 views

World Wood Day celebrations at Nepal Academy (25 March, 2016). Eli Avisera from Israel is turning and many people from the audience pedaled for him. The lathe is designed by Scotty Lewis of Canada, built (with minor modifications) by Andy Chen of USA with parts machined by Brent English of Robust Woodturning Tools and chuck donated by Paul Judkins of Chucks Plus.

 

Woodturning Demo at 2016 WWD Celebrations in Kathmandu, Nepal (3)
By: Andrew Chen
March 30, 2016 · 615 views

World Wood Day celebrations at Nepal Academy (25 March, 2016). Eli Avisera from Israel is turning as Joss Naigeon from France pedals. The lathe is designed by Scotty Lewis of Canada, built (with minor modifications) by Andy Chen of USA with parts machined by Brent English of Robust Woodturning Tools and chuck donated by Paul Judkins of Chucks Plus.

 

Woodturning Demo at 2016 WWD Celebrations in Kathmandu, Nepal (2)
By: Andrew Chen
March 30, 2016 · 290 views

World Wood Day celebrations at Nepal Academy (25 March, 2016). Andy Chen from the USA is turning as Eli Avisera from Israel is pedaling. The lathe is designed by Scotty Lewis of Canada, built (with minor modifications) by Andy Chen of USA with parts machined by Brent English of Robust Woodturning Tools and chuck donated by Paul Judkins of Chucks Plus.

 

Woodturning Demo at 2016 WWD Celebrations in Kathmandu, Nepal (1)
By: Andrew Chen
March 30, 2016 · 213 views

World Wood Day celebrations at Nepal Academy (25 March, 2016). Joss Naigeon from France is turning as Eli Avisera from Israel is pedaling. The lathe is designed by Scotty Lewis of Canada, built (with minor modifications) by Andy Chen of USA with parts machined by Brent English of Robust Woodturning Tools and chuck donated by Paul Judkins of Chucks Plus.

 

Larry McCardel June 2010 Platters1
By: Northcoast Woodturners
March 29, 2016 · 181 views

Larry McCardel turns a platter for the Northcoast Woodturners

 

BayLake Jan 2016
By: BayLake Woodturners
March 26, 2016 · 71 views

January 16, 2016 regular meeting. This was a hands-on workshop (no demonstration), which included a 'Thank You' to AAW for the Educational Opportunity Grant (EOG) awarded to BayLake Woodturners in 2015 to improve video recording and audio equipment.

 

Joe Herrmann June 2012 Square Bowl
By: Northcoast Woodturners
March 26, 2016 · 142 views

Joe demonstrates how to turn a square bowl for the Northcoast Woodturners

 

Shavings
By: BayLake Woodturners
March 25, 2016 · 53 views

BayLake Woodturners, Green Bay, Wisconsin

 

R13 - Demos from August 2008 thru November 2008 - SUMMARY COLLECTION - 4NOV2008
By: Waxhaw Woodturners
March 19, 2016 · 388 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Rich Hansen. Video by Daniel Brinneman. https://danielbrinneman.com

 

R10 - Multiple Demos - Joe Ruminski - 13SEPT2008
By: Waxhaw Woodturners
March 19, 2016 · 206 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Rich Hansen. Video by Daniel Brinneman. https://danielbrinneman.com

 

Utah Woodturning Symposium
By: Craft Supplies USA
March 14, 2016 · 2,001 views

Make plans to be part of the highly acclaimed Utah Woodturning Symposium! Register now: http://utahwoodturning.com/ Please subscribe to our channel: https://www.youtube.com/user/CraftSuppliesUSA Engage with today's top professionals and up-and-coming woodturners in a friendly, informal learning environment. With over 80 demonstrations to choose from and a full schedule of special events, there is something for everyone! Have the woodturning experience of your life at the Utah Woodturning Symposium - register online today at www.utahwoodturning.com

 

Wood Turning - UKIWS Turning Competition and a shout out!
By: Mike Waldt
March 01, 2016 · 3,381 views

All the prizes for The Spirit of Turning Competition have been finalised, and a shout out for a brilliant turner. Competition link: http://www.ukiws.co.uk/competition/ Woodturner21 Channel: https://www.youtube.com/user/woodturner21

 

R7 - Demos from January 2008 thru June 2008 - SUMMARY COLLECTION - 6JAN2008
By: Waxhaw Woodturners
February 23, 2016 · 180 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Rich Hansen. Video by Daniel Brinneman. https://danielbrinneman.com

 

R43 - Demo Day - Joe Ruminski - 14APR2012
By: Waxhaw Woodturners
February 23, 2016 · 673 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Rich Hansen. Video by Daniel Brinneman. https://danielbrinneman.com

 

Woodturning Blooper Reel: UKIWS Competition Video Outtakes.
By: M. Saban Smith Woodturning
February 16, 2016 · 1,411 views

It doesn't always go right making videos. Here are some of the bloopers from a promo video for the UKIWS competition 'The Spirit of Turning'. Enjoy, and please take a look at the competition page this video did a dismal job of promoting! http://www.ukiws.co.uk/competition Thanks.

 

Emerging Bowl by Mike Nathal
By: Northcoast Woodturners
February 16, 2016 · 2,427 views

Mike Nathal turns a emerging bowl for the February 2016 meeting of Northcoast Woodturners.

 

UKIWS Update & Tool Rest Questions Answered
By: Mike Waldt
February 15, 2016 · 5,530 views

A short Update on UKIWS progress, and more exciting news. Also some common Tool Rest questions I get asked - answered. UKIWS Website - http://www.ukiws.co.uk/ Martins Update video - https://www.youtube.com/watch?v 4zZTGIfsYLk UKIWS Facebook page - https://www.facebook.com/ukiws

 

UKIWS Update 11th Feb - New Support and COMPETITION TIME!
By: M. Saban Smith Woodturning
February 11, 2016 · 1,081 views

In this week's UKIWS update, we announce that the Register of Professional Turners and the Worshipful Company of Turners are both going to be at the event in June which means we have three amazing bodies of turners supporting the event.....and, we announce details of our competition - The Spirit of Turning. Prizes in the Competition include Days coaching with a top UK professional Turner, 140.00 vouchers donated by Oliver's Woodturning (http://www.oliverswoodturning.co.uk), 50.00 of turning blanks from ISCA Woodcrafts in Wales (http://http://www.iscawoodcrafts.co.uk/) and a set of three carbide cutters from Glen Teagle (http://www.ukwoodcraftandcarbidechisels.co.uk/) To enter the competition, visit http://www.ukiws.co.uk/competition Thank you.

 

Farmers market turning
By: weekendturner.com
January 30, 2016 · 1,000 views

Just a quick minute of video from one of my fall farmers market demos. Turning here is a natural edge Bradford pear bowl. Really just having fun throwing wet shavings on a perfect fall morning.

 

Tom OlechiwPC org
By: Northcoast Woodturners
January 22, 2016 · 340 views

End Grain Potato Chip with Tom Olechiw

 

UKIWS Update 21st Jan 2016
By: M. Saban Smith Woodturning
January 21, 2016 · 992 views

First video update of 2016 for you today. Here are the links mentioned: The UK & Ireland Woodturning Symposium: http://www.ukiws.co.uk Sponsors: Oliver's Woodturning: http://www.oliverswoodturning.co.uk Taylors Mirfield: http://www.taylorsmirfield.co.uk Axminster: http://www.axminster.co.uk Hampshire Sheen: http://www.hampshiresheen.com Other Links: AWGB: http://www.awgb.co.uk Master Class Tickets: http://www.ukiws.co.uk/tc-events/master-classes/ Club Registration: http://www.ukiws.co.uk/club-registration/ Find the UKIWS on Facebook: http://www.facebook.com/ukiws

 

Spencer's Wooden Creations craft fair 2016
By: 207 Made
January 18, 2016 · 439 views

https://www.facebook.com/207-Made-112917125483794

 

Boston Woodturning trailer
By: Boston Woodturning
January 17, 2016 · 402 views

Boston Woodturning quick tour trailer

 

#27 Tom Stratton - Where Have I Been? - In To 2016 - UKIWS - Channel Update - Wood Turning
By: Tom Stratton
December 29, 2015 · 1,296 views

In this video Tom Stratton explains his absence in 2015 and looks forward to 2016! UK and Ireland Woodturning Symposium - http://www.ukiws.co.uk Any comments are my own and express only my views and opinions. Further projects, turnings and information can be found at http://tomturns.com CHANNEL TAGS Acolyte Turner, Wood Turning, Turning, Project, Ossett, West Yorkshire, UK, Nova, Record Power, DVR XP, BS350, Lathe, Bandsaw, Sanding, Sandpaper, Ruth Niles, Off Centre Jig, Off Center Jig, help, tips, training, learning, how to, Hollow Form Elm Pot Pourri Pot Pourri Holder Carbide Carbide Tools Carbide Turning Tools RS200KT

 

Talking, Turning & Tea - Episode 3 - UKIWS Shoutout!
By: Blind Woodturner
December 14, 2015 · 449 views

In this episode of Talking Turning & Tea, I pack my bags and set off for the UK & Ireland Woodturning Symposium (UKIWS). *** Join me, Chris Fisher, the Blind Wood Turner, in my workshop. I started out in life as a regular guy, working in auto body repair at BMW, until one day, completely out of the blue, a rare virus (Toxoplasmosis) reared its ugly head and caused me to lose my sight in a matter of weeks. Despite the challenges of coming to terms with losing my sight, I refused to give up and, after four years I decided to take up woodturning so that I could make myself a vampire stake – I

 

MikeHawkinsNov15
By: Northcoast Woodturners
December 11, 2015 · 201 views

Mike Hawkins Turns a Tulip Candle Stick for November 2015 meeting

 

Congratulations AAW on Turning 30
By: Conover Workshops
December 07, 2015 · 1,276 views

This video is about Ernie Conover congratulating the American Association of Woodturners (AAW) on its 30th Anniversary.

 

Naked Turner Support For UKWIS The UK and Ireland Woodturners Symposium
By: Erik Anderson
December 05, 2015 · 916 views

This video is to support the UK Irish Woodturners Symposium. Mike, Steve and Martin are the organizers and their website is www.ukiws.co.uk

 

UKIWS Update #4: Trend, Breathing and Competition Time!
By: M. Saban Smith Woodturning
November 26, 2015 · 991 views

Another busy couple of weeks have gone by and we are really pleased to announce that we are going to be running a competition at UKIWS and Trend are coming along too supporting a scheme to raise awareness of respiratory disorders in woodturners and woodworkers. Visit the UKIWS website: http://www.ukiws.co.uk Our Gold Sponsor: Oliver's Woodturning: http://www.oliverswoodturning.co.uk Our Silver Sponsor Taylors Mirfield: http://www.taylorsmirfield.co.uk Lathe Sponsor: Axminster Tools and Machinery: http://www.axminster.co.uk Our Bronze Sponsor Hampshire Sheen: http://www.hampshiresheen.com Massive thanks to all our sponsors and everyone who has bought tickets for UKIWS so far...it's going to be awesome! I created this video with the YouTube Video Editor (https://www.youtube.com/editor)

 

Woodturning Tool Storage and UKIWS
By: Custom Chris
November 22, 2015 · 2,660 views

http://www.ukiws.co.uk For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

#39 UKIWS and Updates
By: Yuval Lahav Woodturning
November 16, 2015 · 672 views

You've got to hear about this thing those crazy dudes in the UK and Ireland are losing their wits about!! And some shop updates :) Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian

 

UKIWS Update
By: Mike Waldt
November 15, 2015 · 3,572 views

The latest developments and progress of The UK & Ireland Woodturning Symposium. Martin Saban-Smith https://www.youtube.com/user/workingimage Steve Twydell https://www.youtube.com/user/stevo15771 UKIWS Website http://www.ukiws.co.uk/ UKIWS Facebook https://www.facebook.com/ukiws/ UKIWS Merchandise http://www.ukiws.co.uk/shop/ Olivers Woodturning https://www.oliverswoodturning.co.uk/ Taylors Mirfield http://www.taylorsmirfield.co.uk/ Hampshire Sheen http://www.hampshiresheen.com/ Axminster Tools & Machinery http://www.axminster.co.uk/ Guitar by Michael Berk https://www.youtube.com/user/mikeberk810

 

UKIWS Update #3 - Sponsors and Lots More!
By: M. Saban Smith Woodturning
November 13, 2015 · 767 views

Oh boy what a week! So much to update you on - the video says it all, and I am sure I've forgotten something! Here are the links mentioned in the video: Oliver's Woodturning: http://www.oliverswoodturning.co.uk Taylors Mirfield: http://www.taylorsmirfield.co.uk Axminster: http://www.axminster.co.uk Hampshire Sheen: http://www.hampshiresheen.com Ticket Booking: http://www.ukiws.co.uk/tc-events/ukiws/ Supporters Page and YouTube Playlist: http://www.ukiws.co.uk/supporters/ Merchandise: http://www.ukiws.co.uk/shop/ I created this video with the YouTube Video Editor (https://www.youtube.com/editor)

 

UK and Ireland Woodturning Syposium
By: H F Bowern Designs - Harold Bowern
November 13, 2015 · 299 views

Welcome back to the channel. Well today I would like to do a shout out for a very important upcoming historical event that will take place in the Coventry England on June 18th and 19th, 2016. YouTube Superstar turners Mike Waldt, Steve Twydell, and Martin Sabab-Smith, are organizing the first ever 'UK and Ireland Woodturning Symposium'. The symposium will be dedicated to all things woodturning. For complete details I have put a link below to the symposium website. UK and Ireland Woodturning Symposium website: http://www.ukiws.co.uk/ I am trying to convince my wife that it would be nice to celebrate her birthday on the 19th over in the UK next year, but I am not sure that will take place. But it never hurts to try :-) Remember if you are over in the UK or visiting there, make a date to visit the event. I am sure it will be well worth your while.

 

UK & Ireland Woodturning Symposium 2016
By: Jake Webb
November 12, 2015 · 188 views

Event website: http://www.ukiws.co.uk/ My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

ukiws
By: The Tiny Trailer Workshop
November 10, 2015 · 230 views

UKIWS United Kingdom and Ireland Woodturning Symposium June 18th & 19th 2016 https://www.youtube.com/channel/UCpHZv5j6vdMmFjXHDBxPLxw Martin Saban Smith Mike Waldt https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w Come one Come All!

 

ukiws texted
By: The Tiny Trailer Workshop
November 10, 2015 · 232 views

UKIWS United Kingdom and Ireland Woodturning Symposium June 18th & 19th 2016 https://www.youtube.com/channel/UCpHZv5j6vdMmFjXHDBxPLxw Martin Saban Smith Mike Waldt https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w Come one Come All!

 

UK & Ireland Woodturning Symposium 2016
By: WYOMINGWOODTURNER
November 09, 2015 · 1,582 views

Check out the 2016 Woodturning Symposium planned for next summer. UK & Ireland Woodturning Symposium website http://www.ukiws.co.uk

 

UK & Ireland Woodturning Symposium - UPDATE!
By: Mike Waldt
November 05, 2015 · 2,751 views

Martins Channel: https://www.youtube.com/watch?v OaR2B89nPlA

 

34 - Marbleizing - Vern Cockayne - 1 Feb 2011
By: Waxhaw Woodturners
November 04, 2015 · 942 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Rich Hansen. Video by Daniel Brinneman. https://danielbrinneman.com

 

UK & Ireland Woodturning Symposium
By: Carl Jacobson
November 02, 2015 · 5,688 views

Website: http://www.ukiws.co.uk The visitor registration form is on every page Trade/Sponsor Registration: http://www.ukiws.co.uk/trade-registra... Facebook: https://www.facebook.com/ukiws Twitter: http://www.twitter.com/ukiws2016 Your Organisers: Mike Waldt: http://www.youtube.com/user/TheCymruBoy Martin Saban-Smith: You're here already! Steve Twydell: http://www.youtube.com/user/stevo15771 Zac Higgins https://www.youtube.com/user/NVWoodwerks Scott Phillips https://www.youtube.com/watch?v _DACys-rGQM I upload a new project video every Friday. Thank you for supporting free woodworking

 

Episode 13: Woodturning Symposium Update and Product Photography Set
By: M. Saban Smith Woodturning
October 30, 2015 · 1,645 views

Wow! What an inceredibly busy week it has been. This video is an update on the rocket-like progress of the planning of the United Kingdom and Ireland Woodturning Symposium Mike Waldt and I announced last week. Here are the links and sites mentioned in the video: Dates: 18th - 19th June 2016 Location: Hilton Hotel, Coventry Website: http://www.ukiws.co.uk The visitor registration form is on every page Trade/Sponsor Registration: http://www.ukiws.co.uk/trade-registration/ Facebook: https://www.facebook.com/ukiws Twitter: http://www.twitter.com/ukiws2016 Your Organisers: Mike Waldt: http://www

 

63 - Creative Inlays - Tim Rinehart - 2 Sept 2014
By: Waxhaw Woodturners
October 28, 2015 · 2,904 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Post with slideshow: http://www.waxhawwoodturners.com/2014/08/mr-tim-rinehart-to-do-creativity-sept-2.html Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video recorded and edited by Daniel Brinneman. http://www.lionsdendesigns.com Video by Daniel Brinneman. https://danielbrinneman.com

 

The Ohio Valley Woodturners Symposium
By: Peter Matthew
October 17, 2015 · 627 views

north woods: http://www.nwfiguredwoods.com I recently went with some guys in my woodturning club to the Ohio Valley Woodturners Symposium. It was an absolute blast and I can't wait for the next one! -------------------------------------- My eBay store: http://www.ebay.com/usr/dste6080 Contact me: peterturnswood@gmail.com

 

Encontro de Torneiros - Pomerode SC
By: Joabe Bomfim
October 08, 2015 · 1,636 views

Exposição de peças de torneiros do Brasil, ocorrida na cidade de Pomerode Sc. São fotografias de 2014 e 2015.

 

woodstock ontario woodshow 2015
By: Woodslee Summercraft
October 07, 2015 · 376 views

a little video of some of the things to see at the annual woodstock woodshow

 

Dave Hout Platters part 2
By: Northcoast Woodturners
September 28, 2015 · 315 views

The second part of Dave Hout turning a platter for the North Coast Woodturners September 2015

 

Brian Becker Demo
By: Northcoast Woodturners
September 25, 2015 · 248 views

Brian Becker turns a yarn spinner and creates a yarn bowl for the North Coast Woodturners

 

Dave Hout Platters part 1 demo
By: Northcoast Woodturners
September 25, 2015 · 536 views

Dave Hout demonstrates turning a platter for the North Coast Woodturners. Two Part video.

 

Pete Wade Cremation Urn Demo
By: Northcoast Woodturners
September 22, 2015 · 6,157 views

Pete Wade turns a cremation urn for the Northcoast Woodturners

 

Should You Belong to the AAW?
By: Mike Peace Woodturning
August 29, 2015 · 1,562 views

I believe every turner in the US (and some outside the US) should belong to the American Association of Woodturners (AAW). In this video I explain why. Gain access to a preview issue of the on-line digital magazine for beginners, Wooturning FUNdamentals available here: http://www.woodturner.org/?page FUNdamentals Want to find a woodturning chapter near you? Find one here: http://www.woodturner.org/search/custom.asp?id 1509 Learn more about the benefits of membership and how to join here: http://www.woodturner.org/?page MemberBenefits Check out my blog for demonstration handouts, downloadable copies of articles I have published, and links to some full length demonstrations I have done at Gwinnett Woodworkers channel. MikePeaceWoodturning.blogspot.com

 

SWAT Woodturning Symposium
By: Carl Jacobson
August 28, 2015 · 6,869 views

Thank you everyone we had a great time at SWAT Shawn Graham http://wortheffort.com/ Jerry Brown https://www.youtube.com/user/TheRealWarrenbty Jason, North Woods http://www.nwfiguredwoods.com/ Steve Worcester http://turningwood.com/ Ornamental Turning http://www.ornamentalturners.org/ I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtool

 

WGNC at Cary Lazy Daze 2015 -- time lapse
By: weekendturner.com
August 28, 2015 · 656 views

WGNC had live demos throughout the Cary Lazy Daze event again this year. Though somewhat tucked away in the 'Children's area' we did get moderate traffic & interest from this huge event.

 

Wood Turning Expo PWG
By: andrew kosnovsky
August 13, 2015 · 692 views

A random selection of work, by members of the Peninsula Woodturners Guild. As displayed at our, biannual exhibition competition.

 

SEGUNDA EXPOSICION 2015
By: TORNEANDO MADERA CON MARIO CANTARUTTI
August 02, 2015 · 5,564 views

 

#84 My Homespun Festival Woodturning Presentation
By: Stephen Ogle
July 17, 2015 · 5,334 views

This video is made for presenting at the annual Homespun Festival in my hometown of Rockmart, GA. It features four of my recent Youtube uploaded video projects. I will be showing this video on a loop inside my craft booth.

 

2015 AAW Symposium and an old Windsor chair.
By: Adze Woodturning
June 30, 2015 · 977 views

Update on what I've been doing and an old Windsor Chair

 

2015 AAW Symposium Gallery, Empty Bowls, Beads Of courage
By: Jeffrey Schnell
June 28, 2015 · 1,426 views

2015 AAW Symposium Gallery, Empty Bowls, Beads Of courage

 

2015 AAW Symposium Instant Gallery
By: Jeffrey Schnell
June 27, 2015 · 3,492 views

2015 AAW Symposium Instant Gallery

 

SPSW 028 1995 Symposium Techniques
By: SPSW Video Library
June 18, 2015 · 104 views

Demonstrators at the 1995 AAW Symposium

 

SPSW 026 1996 Symposium Techniques
By: SPSW Video Library
June 18, 2015 · 219 views

Demonstrators at the 1996 AAW Symposium

 

Phil Irons at Drechselstube Neckarsteinach
By: Drechselstube
May 24, 2015 · 9,955 views

Die Aufnahmen entstanden in der dns-Drechseltube Neckarsteinach während der Themen- und Profikurse Hollowform I und II mit Phil Irons vom 20. - 25. März 2015

 

Glenn Lucas at Drechselstube Neckarsteinach
By: Drechselstube
May 24, 2015 · 14,329 views

Die Aufnahmen entstanden in der dns-Drechselstube Neckarsteinach während der Themen-und Profikurse mit Glenn Lucas vom 10. - 18. April 2015.

 

Finishing Up a Demonstration Piece ----Utah Woodturning Symposium 2015
By: WYOMINGWOODTURNER
May 23, 2015 · 3,327 views

Sam finishes a demonstration piece started at the Utah Woodturning Symposium: Big leaf maple hollow form with a finial.

 

Mounts Botanical Garden Show April 25 & 26 2.015
By: Miguel Sanchez
April 26, 2015 · 3,566 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Exposicion realizada en Mounts Botanical Garden, en West Palm Beach, Florida, los dias 25 y 26 de Abril de 2.015 http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

Getting Ready for The Utah Woodturning Symposium 2015
By: WYOMINGWOODTURNER
April 25, 2015 · 6,063 views

Sam makes a video showing how he prepares for a woodturning demonstration.

 

Totally Turning 2015
By: Jeffrey Schnell
March 29, 2015 · 392 views

Description

 

Spencer's Wooden Creations craft fair 11/20/14
By: 207 Made
March 15, 2015 · 139 views

Spencer's Wooden Creations craft fair 11/20/14 https://www.facebook.com/pages/Spencers-Wooden-Creations/112917125483794?ref bookmarks

 

Oregon Symposium
By: Carl Jacobson
March 13, 2015 · 7,557 views

Here are a few highlights from the symposium, and a huge thank you to everyone. Mark Choiz's channel https://www.youtube.com/channel/UCqQlUtC7UzLXZzM6-lqtbVQ Linn's channel Darbin Orvar https://www.youtube.com/user/darbinorvar Reed Gray's channel robohippy https://www.youtube.com/user/robohippy Willamette Valley Woodturners http://www.willamettevalleywoodturners.com/Default.aspx Klamath Falls woodturning club 541-892-3292 Tillamook woodturning club 503-801-0352 I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https

 

12 14 2014 IKI Meeting
By: IKI Woodturners
January 08, 2015 · 296 views

December 14th 2014 IKI Wood Turners Meeting Presents: Turning A Pewter Finial With Dan Davis

 

WGNC Demo: Mike Bulat off-centering Oct. 9, 2014
By: weekendturner.com
January 02, 2015 · 6,387 views

WGNC member Mike Bulat demonstrates some off-center turning projects, including an off-center corkscrew and tool handles at the Oct. 9, 2014 meeting of the Woodturners Guild of North Carolina.

 

WGNC October 2014 Gallery Critique
By: weekendturner.com
January 02, 2015 · 3,566 views

WGNC VP Chris Boerner critiques member offerings at the Oct. 9, 2014 meeting of the Woodturners Guild of North Carolina at the NC State College Crafts Center. WoodturnersGuild.com

 

WGNC Demo: Bob Verne on gallery-quality finishes Sept. 2014
By: weekendturner.com
December 13, 2014 · 3,764 views

WGNC member Bob Verne discusses his techniques for achieving gallery-quality finishes on his woodturned pieces at the Sept. 11, 2014 meeting of the Woodturners Guild of North Carolina.

 

WGNC September 2014 Gallery Critique
By: weekendturner.com
December 13, 2014 · 1,670 views

WGNC member and demonstrator Bob Verne critiques member offerings at the Sept. 11, 2014 meeting of the Woodturners Guild of North Carolina at the NC State College Crafts Center. WoodturnersGuild.com

 

WGNC Demo: Bob Reuss turns natural edge forms Aug 2014
By: weekendturner.com
December 12, 2014 · 7,034 views

WGNC President Bob Reuss demonstrates his methods and various forms of natural-edge turning at the Aug. 14, 2014 meeting of the Woodturners Guild of North Carolina at the NC State Crafts Center in Raleigh.

 

WGNC August 2014 Gallery Critique
By: weekendturner.com
December 12, 2014 · 760 views

WGNC President Bob Reuss critiques member offerings at the August 14, 2014 meeting of the Woodturners Guild of North Carolina at the NC State College Crafts Center. WoodturnersGuild.com

 

60 - Celtic Knots - Joe Giannina - 6 May 2014
By: Waxhaw Woodturners
November 08, 2014 · 18,675 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Daniel Brinneman. Video by Daniel Brinneman. https://danielbrinneman.com

 

Flussgeschichten vom Neckar Drechselstube
By: Drechselstube
September 10, 2014 · 6,005 views

Die dns Drechselstube Neckarsteinach - Ausschnitt aus der Sendung des Hessischen Rundfunks vom 9. September 2014 'Flussgeschichten vom Neckar'

 

Stammtisch-Sommerfest 2014
By: Zirbelholz Fred
August 29, 2014 · 1,323 views

Der Drechsler-Stammtisch-München veranstaltete sein Sommerfest und über 80 Gäste gaben sich die Ehre. Es war ein Tag mit vielen Highlights. Created with MAGIX Video deluxe 2013 Plus

 

Grain Orientation and how it affects your Turning
By: IKI Woodturners
August 26, 2014 · 903 views

August 3rd, 2014 IKI Wood Turners Meeting A Discussion and demonstration of grain orientation and how to plan your cuts to improve the finish of your turnings. Featuring: Eric Gourieux

 

Dave Swiger 6 11 2014
By: Mid-Maryland Woodturners Club
August 23, 2014 · 2,936 views

Club president Dave Swiger demonstrates basic spindle and bowl gouge sharpening using the TORMEK System, a grinder with stone wheels, and a grinder with CBN wheels. Advantages and disadvantages of the three systems are discussed.

 

Andy Hilton Projects for Fairs and Craft Shows
By: Woodturners of Southwest Missouri
August 08, 2014 · 25,695 views

Andy shows our club, the Woodturners of Southwest MO, some of the projects he has demonstrated at Fairs and Craft Shows for the public. We spend 10 days each year at the Ozark Empire Fair right here in Springfield, MO demonstrating woodturning. You can visit our website at www.woodturnersofswmo.org.

 

Charles Wortman 7 9 2014
By: Mid-Maryland Woodturners Club
August 04, 2014 · 1,806 views

Pen turning demonstration by Charles Wortman of Catoctin Area Turners.

 

Farmers Market demo
By: weekendturner.com
August 02, 2014 · 2,979 views

It was a bit rainy and slow to start, but I got to spend Saturday morning turning and sharing at the Midtown Farmers Market at Raleigh's North Hills in Mall Aug. 3. I used a GoPro to capture a 2-second time-lapse of just the first 90 minutes of this 4-hour session. Of course, once the camera card filled up the rain stopped and the crowd got much bigger.

 

WGNC July 2014 gallery critique
By: weekendturner.com
July 11, 2014 · 1,558 views

WGNC VP Chris Boerner critiques member offerings at the July 10, 2014 meeting of the Woodturners Guild of North Carolina at the NC State College Crafts Center. WoodturnersGuild.com We've changed the meeting format to help ensure quiet during the gallery segment. Adding a turntable helps provide a focal point for the reviewer and audience.

 

WGNC June 2014 gallery critique
By: weekendturner.com
June 28, 2014 · 2,957 views

WGNC VP Chris Boerner critiques member offerings at the June 12, 2014 meeting of the Woodturners Guild of North Carolina at the NC State College Crafts Center. WoodturnersGuild.com We've changed the meeting format to help ensure quiet during the gallery segment. Adding a turntable helps provide a focal point for the reviewer and audience.

 

WGNC Demo: Member Todd Hartzell turns some quick & fun items
By: weekendturner.com
June 28, 2014 · 3,760 views

WGNC member Todd Hartzell demonstrates 'Quick & fun' woodturning projects at the April 10, 2014 meeting of the Woodturners Guild of North Carolina at the NC State Crafts Center in Raleigh.

 

2014 American Association of Woodturning (AAW) Symposium
By: Jeffrey Schnell
June 17, 2014 · 8,201 views

Here's a video of the gallery pictures I took at the 2014 AAW Symposium this weekend. http://www.woodturner.org

 

Un bosco italiano 2014
By: Livio Maritati
May 26, 2014 · 2,746 views

Seconda edizione del concorso di tornitura lignea, promosso dalla AIATL e svoltosi il 10 e 11 maggio 2014 a Rovato (BS) presso la Scuola d'Arti e Mestieri 'F. Ricchino'.

 

2014 Utah Woodturning Symposium: My Thoughts
By: WYOMINGWOODTURNER
May 25, 2014 · 2,723 views

The Utah Woodturning Symposium celebrated its 35th year in 2014. In 2013, Dale Nish, founder of the symposium passed away. His passing is a loss to the entire woodturning community. His influence will reach far into the future.

 

DEMO-TAG April 2014
By: Zirbelholz Fred
May 21, 2014 · 414 views

Impressionen vom DEMO-TAG des www.drechsler-stammtisch-muenchen.de im April 2014 Created with MAGIX Video deluxe 2013 Plus

 

WGNC May 2014 gallery critique
By: weekendturner.com
May 20, 2014 · 2,547 views

WGNC member Don Leydens critiques member offerings at the May 8 meeting of the Woodturners Guild of North Carolina at the NC State College Crafts Center. WoodturnersGuild.com We've changed the meeting format to help ensure quiet during the gallery segment. Adding a turntable helps provide a focal point for the reviewer and audience.

 

Boring Bar Hollowing System
By: IKI Woodturners
April 16, 2014 · 3,356 views

Eric Gourieux discusses and demonstrates his home built Boring Bar System for hollowing large turnings. The club has a questions and answer session then Eric does a brief demonstration.

 

DAW Pride
By: Roger Meeker
April 16, 2014 · 1,157 views

Detroit Area Woodturners and what we do in our club; learn, teach, make new friends, turn, share skills, demos, etc.

 

WGNC April 2014 gallery critique
By: weekendturner.com
April 12, 2014 · 3,531 views

WGNC member Chris Boerner critiques member offerings at the April 10 meeting of the Woodturners Guild of North Carolina at the NC State College Crafts Center. WoodturnersGuild.com For those who may follow these critiques, note that there was none at the March meeting due to the lengthy demo by our special guest demonstrator Liam O'Neill.

 

Totally Turning 2014 Longer/Slower Version
By: Jeffrey Schnell
April 02, 2014 · 652 views

Description

 

Totally Turning 2014
By: Jeffrey Schnell
March 31, 2014 · 694 views

Woodturnings from the gallery from http://www.totallyturning.com

 

DAW Instant Gallery March 2014
By: Roger Meeker
March 31, 2014 · 158 views

Detroit Area Woodturners Instant Gallery March 2014

 

35 - New Dimensions and Ideas - Moe Gingerich - 5 Mar 2011 FINAL
By: Waxhaw Woodturners
March 30, 2014 · 835 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Rich Hansen Video by Daniel Brinneman. https://danielbrinneman.com

 

Franz Keilhofer beim Drechsler-Stammtisch-München
By: Zirbelholz Fred
March 23, 2014 · 1,258 views

Unser Stammtischmitglied Franz Keilhofer führt vor Created with MAGIX Video deluxe 2013 Plus

 

DAW Gallery
By: Roger Meeker
March 22, 2014 · 38 views

Detroit Area Woodturners Gallery

 

AMoBS (Episode 10) The Aus Woodturning Ex
By: Brendan Stemp
March 16, 2014 · 8,626 views

The Australian Woodturning Exhibition is coming soon. I hope you are getting your entries ready. See this link for all details. http://www.theaustralianwoodturningexhibition.net

 

2014-02-28 - 01
By: Zirbelholz Fred
March 02, 2014 · 2,704 views

Drechsler Stammtisch München Februar 2014 Created with MAGIX Video deluxe 2013 Plus

 

WGNC Demo: Jim Duxbury 'recycles' on Feb. 20
By: weekendturner.com
February 21, 2014 · 2,272 views

WGNC member Jim Duxbury demonstrates his bottle and wood 'recycling' project at the Feb. 20 meeting of the Woodturners Guild of North Carolina. In the latter half of the meeting, Jim goes into some detail about his amazing chandelier project and talks a bit about making your own tools.

 

WGNC February 2014 gallery critique
By: weekendturner.com
February 21, 2014 · 1,485 views

WGNC member Chris Boerner critiques member offerings at the Feb. 20 meeting of the Woodturners Guild of North Carolina at the NC State College Crafts Center. WoodturnersGuild.com

 

Drechseln für Einsteiger in der Drechselstube Hessenschau
By: Drechselstube
January 30, 2014 · 11,059 views

Die Hessenschau während eines Einsteigerkurses zu Besuch in der Drechselstube Neckarsteinach http://www.drechselstube.de

 

Stammtisch Januar 2014
By: Zirbelholz Fred
January 30, 2014 · 749 views

Der Drechsler-Stamtisch-München trifft sich monatlich. Created with MAGIX Video deluxe 2013 Plus

 

WGNC January 2014 gallery critique
By: weekendturner.com
January 11, 2014 · 609 views

WGNC member Lars Nyland critiques member offerings from the instant gallery at the January 9, 2014 meeting of Woodturnersguild.com of North Carolina.

 

WGNC Demo: Mike Smith shares wood wisdom Nov. 14
By: weekendturner.com
November 20, 2013 · 690 views

Long-time WGNC member, supporter and wood seller Mike Smith shared some wisdom about wood that he's gained over the years he's spent operating a saw mill at the Nov. 14, 2013 meeting of the Woodturners Guild of North Carolina at the NC State Crafts Center in Raleigh. Mike talks about the nature of wood, how he prepares and preserves it, and his special love and experience with harvesting burls, which he sells to woodturners.

 

WGNC November 2013 gallery critique
By: weekendturner.com
November 17, 2013 · 347 views

WGNC VP Chris Boerner critiques member offerings from the instant gallery at the November 14, 2013 meeting of Woodturnersguild.com of North Carolina.

 

OVWG 2013
By: Vinces WoodNWonders
October 30, 2013 · 1,909 views

Video for friends to view and enjoy. The Ohio Valley Woodturners Guild Symposium October 2013.

 

WGNC October 2013 gallery critique with Trent Bosch
By: weekendturner.com
October 23, 2013 · 1,742 views

WGNC visiting artist and demonstrator Trent Bosch of Colorado critiques member offerings from the instant gallery at the October 10, 2013 meeting of Woodturnersguild.com of North Carolina.

 

KCWTJerryDarter1
By: KCWoodturners1
October 22, 2013 · 1,332 views

Kansas City Woodturners Association presents Jerry Darter making a large Spinning Top. Demo 10/14/2013 at the KCWT Clubhouse

 

KCWTJimFaherty1
By: KCWoodturners1
October 03, 2013 · 646 views

Jim Faherty demonstrates woodturning and making a winged bowl. Demo at the KC Woodturners clubhouse on 9-9-2013.

 

Einweihung bei Mike
By: Zirbelholz Fred
September 22, 2013 · 876 views

Mike hat eine neue Werkstatt in Erkheim Created with MAGIX Video deluxe 2013 Plus

 

September-Stammtisch 2013
By: Zirbelholz Fred
September 21, 2013 · 557 views

Drechsler-Stammtisch-München Treffen am 20.09.2013 Created with MAGIX Video deluxe 2013 Plus

 

WGNC demo: Gilding with Tom Terrell Sept. 2013
By: weekendturner.com
September 13, 2013 · 4,695 views

WGNC member Tom Terrell demonstrates gilding techniques for woodturning at the Sept. 12, 2013 meeting of the Woodturners Guild of North Carolina at the NC State Crafts Center in Raleigh. Tom wrote an article on the subject that was published in the Sept. issue of the American Assocation of Woodturners magazine.

 

WGNC September 2013 gallery critique
By: weekendturner.com
September 13, 2013 · 358 views

WGNC VP Chris Boerner critiques member offerings from the instant gallery at the September 12, 2013 meeting of Woodturnersguild.com of North Carolina.

 

Durchbrochene Kugeln Teil1
By: Zirbelholz Fred
September 07, 2013 · 18,929 views

Die Herstellung einer gedrechselten, hohlen Weihnachtskugel mit verschiedenen durchbrochenen Motiven. Eine Arbeitsanleitung von www.zirbelholz.de Created with MAGIX Video deluxe 2013 Plus

 

KCWTJerryMcMaster1
By: KCWoodturners1
August 28, 2013 · 1,861 views

Jerry McMaster demonstrates woodturning surface decoration and piercing. Demo at the KC Woodturners clubhouse on 8-12-2013.

 

SWAT Woodturning Symposium 2013
By: wortheffort
August 25, 2013 · 5,706 views

Southwest Area Woodturnrers Association annual 2013 symposium in Waco TX was fun, educational, and inspiring as usual. Here's my 3rd annual synapses of the cool pieces and some of the great presenters such as Jimmy Clewes (more speed, more fire) and Ashley Harwood (I don't need no grinding jig). SWAT really does a great job putting on a Symposium. Go next year if you can. Edited and uploaded, as usual, on the drive home with my iPhone.

 

August-Stammtisch 2013
By: Zirbelholz Fred
August 19, 2013 · 748 views

Drechsler-Stammtisch München Created with MAGIX Video deluxe 2013 Plus

 

Juli-Stammtisch 2013
By: Zirbelholz Fred
August 18, 2013 · 489 views

Das erste Stammtisch-Treffen des Drechsler-Stammtisch-München in der neuen Bleibe Created with MAGIX Video deluxe 2013 Plus

 

WGNC August 2013 gallery critique
By: weekendturner.com
August 09, 2013 · 392 views

WGNC VP Chris Boerner critiques member offerings from the instant gallery at the August 8, 2013 meeting of Woodturnersguild.com of North Carolina.

 

WGNC demo: Bob Reuss turns 2-piece hollow forms Aug. 2013
By: weekendturner.com
August 09, 2013 · 8,431 views

WGNC Treasurer Bob Reuss turns a 2-piece hollow form at the Aug. 8, 2013 meeting of the Woodturners Guild of North Carolina at the NC State Crafts Center in Raleigh.

 

2012 December Turners Meeting
By: Terry Brown
July 23, 2013 · 45 views

 

2013 March Turners Meeting
By: Terry Brown
July 23, 2013 · 34 views

 

2013 Februarys turners meeting
By: Terry Brown
July 23, 2013 · 21 views

 

2012 May Turners Meeting
By: Terry Brown
July 23, 2013 · 15 views

 

2012 July turners Meeting
By: Terry Brown
July 23, 2013 · 10 views

 

2012 August Turners Meeting
By: Terry Brown
July 23, 2013 · 11 views

 

WGNC demo: Lars Nyland turns cubes on the bias July 2013
By: weekendturner.com
July 13, 2013 · 3,818 views

WGNC member Lars Nyland turns a cube of wood on the bias -- corner to corner -- at the July 11, 2013 meeting of the Woodturners Guild of North Carolina at the NC State Crafts Center in Raleigh. Later in the program he also discusses pyrography and home-made burners.

 

WGNC July 2013 gallery critique
By: weekendturner.com
July 12, 2013 · 198 views

WGNC VP Chris Boerner critiques member offerings for the instant gallery at the July 11, 2013 meeting of the Woodturnersguild.com of North Carolina.

 

# 176 SWAT
By: Cap'n Eddie Castelin
July 11, 2013 · 3,288 views

SWAT is a huge regional symposium in Waco Texas the last weekend of August 2013. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

2013 American Association Of Woodturners (AAW) Symposium Instant Gallery Tampa, FL
By: Jeffrey Schnell
July 04, 2013 · 43,345 views

Finally got my photos uploaded of the 2013 AAW Symposium Instant Gallery http://www.flickr.com/photos/jschnell1203/sets/72157634928964408/ 2013 American Association Of Woodturners (AAW) Symposium Instant Gallery Tampa, FL. This is a video of 1600 pictures I took of the Instant Gallery with 3 seconds in between.

 

WGNC June 2013 gallery critique
By: weekendturner.com
July 03, 2013 · 335 views

WGNC vice president Chris Boerner critiques member offerings at the June 16, 2013 meeting of the Woodturners Guild of North Carolina.

 

Spring bowl turning tour
By: Dan Walker
June 02, 2013 · 1,125 views

 

Mayfaire Woodturning 2013
By: Lamar Sineath
May 28, 2013 · 1,251 views

I dropped by this annual art fair and met some artists that were kind enough to let me photograph their works of woodturning art in Lakeland, FL

 

KCWTAnthonyHarris2
By: KCWoodturners1
May 19, 2013 · 1,024 views

Anthony Harris demonstrates the five woodturning spindle cuts and talks about the bevel. Demo at the KC Woodturners clubhouse on 5-13-2013.

 

#30 Feria de artesania, Antigua 2013
By: Miguel Sanchez
May 14, 2013 · 11,772 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Un breve vistazo al stand que monte este fin de semana en la feria de Antigua, mucho trabajo, mucho calor y gente estupenda fueron las caracteristicas principales, espero estar ahi el año proximo.

 

42 - Non Round Turnings - Ed Pfau - 6 Mar 2012
By: Waxhaw Woodturners
May 10, 2013 · 973 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Video by Rich Hansen. Video by Daniel Brinneman. https://danielbrinneman.com

 

51 - Carnations - Roland Hege - 7 May 2013
By: Waxhaw Woodturners
May 10, 2013 · 843 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Daniel Brinneman. Video by Daniel Brinneman. https://danielbrinneman.com

 

WGNC May 2013 gallery critique
By: weekendturner.com
May 10, 2013 · 6,459 views

Visiting artist and demonstrator Jimmy Clewes critiques member offerings at the May 9, 2013 meeting of the Woodturners Guild of North Carolina.

 

Butterfly
By: Livio Maritati
May 02, 2013 · 963 views

Opera vincitrice della sezione di tornitura lignea policroma del concorso 'Un bosco italiano', 20 e 21 aprile 2013 - Rovato (BS)

 

Un bosco italiano
By: Livio Maritati
May 01, 2013 · 8,562 views

Concorso di tornitura lignea svoltosi il 20 e 21 aprile 2013 a Rovato presso la scuola d'Arti e Mestieri 'F. Ricchino'

 

SonnieSharrar1
By: KCWoodturners1
May 01, 2013 · 3,649 views

George 'Sonnie' Sharrar and his friend Earl Reed demonstrate Sonnie's method of making segmented bowls. Video was made in 2005.

 

KCWTEdBergstedt1
By: KCWoodturners1
April 16, 2013 · 796 views

Ed Bergstedt demonstrates turning a Peppermill on the wood lathe at the KC Woodturners Association Clubhouse on 4-8-13.

 

WGNC April 2013 gallery critique
By: weekendturner.com
April 12, 2013 · 175 views

WGNC vice president Chris Boerner critiques member offerings at the April 11, 2013 meeting of the Woodturners Guild of North Carolina.

 

50 - Two-piece Goblet - Ed Pfau - 2 April 2013
By: Waxhaw Woodturners
April 03, 2013 · 650 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Daniel Brinneman. Video by Daniel Brinneman. https://danielbrinneman.com

 

A Visit to the Shepparton Wood Show
By: Brendan Stemp
March 18, 2013 · 6,816 views

This is a video of my recent visit to the Shepparton Wood Show as a demonstrator and site holder.. It is run by the Woodturners of the Goulburn Valley each year as their major fund raiser.

 

WGNC demo: Boerner on end-grain, natural edge vessels March 2013
By: weekendturner.com
March 15, 2013 · 12,480 views

WGNC Vice President Chris Boerner turns an end-grain, natural-edge vessel from a birch log during the March 14, 2013 meeting of the Woodturners Guild of North Carolina at the NC State Crafts Center in Raleigh Chris opens with a compelling spin on turning safety, citing a few of his own close-calls and some tips to avoid getting hurt.

 

WGNC March 2013 member gallery
By: weekendturner.com
March 15, 2013 · 423 views

WGNC member Lars Nyland reviews member gallery offerings at the March 14, 2013 meeting of the Woodturners Guild of North Carolina in Raleigh

 

WGNC Demo: Jim Duxbury's new spin on flat work February 2013
By: weekendturner.com
February 18, 2013 · 5,581 views

WoodturnersGuild.com member and Jim Duxbury demonstrates hwat he calls 'a new spin on flatwork' using glue-ups and off-axis spindle turning at the Feb 14 meeting in the NC State Craft Center. In the final segment, Jim used a strobe light to more easily follow his marked lines on a spinning block, but the lights were dimmed and the overall effect did not record well so it was dropped from this. My apologies.

 

WGNC February 2013 gallery critique1
By: weekendturner.com
February 15, 2013 · 281 views

WGNC vice president Chris Boerner critiques member offerings for the instant gallery at the Feb 14, 2013 meeting of the Woodturnersguild.com of North Carolina.

 

49 - Jeannie Bottles - Bruce Lacy - 5 Feb 2013
By: Waxhaw Woodturners
February 12, 2013 · 3,716 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Daniel Brinneman. Video by Daniel Brinneman. https://danielbrinneman.com

 

Carl Ford, January 14th 2013, Nutmeg Woodturners
By: NutmegWoodturners
February 06, 2013 · 716 views

Carl Ford demonstrating 'IGreat Polyurethane Finishes' at January 14th 201, Regular Meeting of Nutmeg Woodturners in the Turning Studio at Brookfield Craft Center. For more photos see http://www.nutmegwoodturners.com

 

3 - Rose Engine - Roland Hege - 4 March 2008
By: Waxhaw Woodturners
January 24, 2013 · 1,870 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Rich Hansen. Video by Daniel Brinneman. https://danielbrinneman.com

 

9 - Tea Pot - Raymond Overman - 5 Aug 2008
By: Waxhaw Woodturners
January 24, 2013 · 7,938 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Raymond Overman http://www.overmanshop.com Tania Radda http://www.taniaradda.com/teapots.html Waxhaw Woodturners http://www.waxhawwoodturners.com Video by Rich Hansen. Video by Daniel Brinneman. https://danielbrinneman.com

 

10 - Joe Ruminski - Carolina Mountain Woodturners - 13Sept2008
By: Waxhaw Woodturners
January 21, 2013 · 4,938 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Video by Rich Hansen.

 

47 - French Lace from Red Oak - Moe Gingerich - 6 Nov 2012
By: Waxhaw Woodturners
January 21, 2013 · 1,918 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Edited by Daniel Brinneman http://www.lionsdendesigns.com Video by Daniel Brinneman. https://danielbrinneman.com

 

KCWTSiskeySchneckHarris1
By: KCWoodturners1
January 21, 2013 · 1,747 views

Chip Siskey, Merle Schneck, Anthony Harris demonstrate Woodturning Techniques on the wood lathe at the KC Woodturners Clubhouse on 9-8-2007

 

KCWTBillKuhlman1
By: KCWoodturners1
January 21, 2013 · 589 views

Bill Kuhlman demonstrates Turning a Wooden Plate on the wood lathe at the KC Woodturners Clubhouse on 3-12-2007.

 

KCWTJimFaherty1
By: KCWoodturners1
January 20, 2013 · 927 views

Jim Faherty demonstrates Turning a Tri-Cornered Bowl on the wood lathe at the KC Woodturners Clubhouse on 4-9-2007.

 

KCWTAnthonyHarris1
By: KCWoodturners1
January 20, 2013 · 1,275 views

Anthony Harris demonstrates Turning an Osage Orange Wood Pipe on the wood lathe at the KC Woodturners Clubhouse on 6-11-2007.

 

KCWTJerryMcMasters1
By: KCWoodturners1
January 20, 2013 · 1,908 views

Jerry McMasters demonstrates Turning a Double Axis Square Bowl on the wood lathe at the KC Woodturners Clubhouse on 5-14-2007.

 

KCWTJudyChesnut1
By: KCWoodturners1
January 20, 2013 · 725 views

Judy Chesnut demonstrates Turning a Sea Urchin Ornament on the wood lathe at the KC Woodturners Clubhouse on 11-27-2007.

 

KCWTJerryDarter2
By: KCWoodturners1
January 16, 2013 · 467 views

Jerry Darter demonstrates **Partial Video** Green Wood Bowl Turning on the wood lathe at the KC Woodturners Clubhouse on 7-9-2007.

 

KCWTChipSiskey1
By: KCWoodturners1
January 16, 2013 · 3,019 views

Chip Siskey demonstrates **Partial Video** Turning a Square Edged Hollow Form on the wood lathe at the KC Woodturners Clubhouse on 3-15-2008.

 

KCWTDavidBartlett2
By: KCWoodturners1
January 15, 2013 · 414 views

David Bartlett demonstrates Turning a Ball and Cup on the wood lathe at the KC Woodturners Clubhouse on 2-12-2007.

 

WGNC June 2011 Gallery Critique
By: weekendturner.com
January 11, 2013 · 204 views

Older club video uploaded as separate segments in playlist, combined as one segment.

 

WGNC July 2011 Gallery Critique
By: weekendturner.com
January 11, 2013 · 181 views

Older club video uploaded as separate segments in playlist, combined as one segment.

 

WGNC April 2011 Gallery Critique
By: weekendturner.com
January 11, 2013 · 201 views

Older club video uploaded as separate segments in playlist, combined as one segment.

 

WGNC March 2011 Gallery Critique
By: weekendturner.com
January 11, 2013 · 124 views

Older club video that was uploaded in sections as a playlist, now combined into one segment.

 

WGNC January 2013 gallery critique
By: weekendturner.com
January 10, 2013 · 335 views

WGNC member Lars Nyland critiques member offerings for the instant gallery at the January 10, 21013 meeting of the Woodturnersguild.com of North Carolina.

 

KCWTDavidBartlett1
By: KCWoodturners1
January 01, 2013 · 396 views

David Bartlett demonstrates wood lathe Chucking Methods at the KC Woodturners Clubhouse on 8-11-2008.

 

KCWTParkerNicholson1
By: KCWoodturners1
January 01, 2013 · 1,338 views

Parker Nicholson demonstrates bowl Bowtie Repairs at the KC Woodturner Clubhouse on 9-8-2008.

 

KCWTRussBlaser1
By: KCWoodturners1
December 30, 2012 · 1,329 views

Russ Blaser demonstrates turning an Offset Weed Pot at the KC Woodturner Clubhouse on 3-10-2008.

 

Harvey Fein, November 12th 2012, Nutmeg Woodturners
By: NutmegWoodturners
November 16, 2012 · 1,685 views

Harvey Fein demonstrating 'Incising Techniques for Turners' at September 12th 2012, Regular Meeting of Nutmeg Woodturners in the Turning Studio at Brookfield Craft Center. For more photos see http://www.nutmegwoodturners.com

 

WGNC November 2012 gallery critique
By: weekendturner.com
November 09, 2012 · 657 views

Professional woodturner and WGNC member Terry Brown critiques member offerings for the instant gallery at the November 8, 2012 meeting of the Woodturnersguild.com of North Carolina.

 

Joe Larese, May 10th, 2010, Nutmeg Woodturners
By: NutmegWoodturners
November 08, 2012 · 192 views

Joe Larese demonstrating how to turn Candle Sticks at the May 10th, 2010 meeting of the Nutmeg Woodturners League in Brookfield CT. For more photos see http://www.nutmegwoodturners.com

 

Joshua Friend, Sept 12, 2011, Nutmeg Woodturners
By: NutmegWoodturners
November 08, 2012 · 233 views

Joshua Friend demonstrating how to turn wooden Cigar Tubes at the Sept 12, 2011 meeting of the Nutmeg Woodturners League in Brookfield CT. For more photos see http://www.nutmegwoodturners.com For more info see http://jfriendwoodworks.com/documents/PDFCigarTubes.pdf

 

Joe Larese, January 9th, 2012, Nutmeg Woodturners
By: NutmegWoodturners
November 08, 2012 · 271 views

Joe Larese demonstrating how to turn a Box at the January 9th, 2012 meeting of the Nutmeg Woodturners League in Brookfield CT. For more photos see http://www.nutmegwoodturners.com

 

Don Metz, April 14th, 2012, Nutmeg Woodturners
By: NutmegWoodturners
November 08, 2012 · 140 views

Don Metz discussing Colored Epoxy at Nutmeg Woodturners Aprl 14th, 2012, Learn and Turn For more photos see http://www.nutmegwoodturners.com

 

Keith Tompkins, May 14th, 2012, Nutmeg Woodturners
By: NutmegWoodturners
November 08, 2012 · 950 views

'Drunken Bottle Stoppers' demo by Keith Tompkins at Nutmeg Woodturners May 14th 2012, Regular Meeting in the Turning Studio at Brookfield Craft Center. For more photos see http://www.nutmegwoodturners.com

 

Joe Larese, June 9th 2012, Nutmeg Woodturners
By: NutmegWoodturners
November 08, 2012 · 120 views

Joe Larese turning finials at Nutmeg Woodturners June 9th, 2012, Learn and Turn Meeting in Joe's Garage Studio. For more photos see http://www.nutmegwoodturners.com

 

WGNC October 2012 gallery critique
By: weekendturner.com
October 13, 2012 · 534 views

World renown woodturning artist Alan Stirt critiques member offerings for the instant gallery at the October 11, 2012 meeting of the Woodturnersguild.com of North Carolina.

 

WGNC August 2012 gallery critique
By: weekendturner.com
September 24, 2012 · 1,650 views

WoodturnersGuild.com VP Chris Boerner critiques member gallery offerings at the August 2012 meeting in Raleigh, NC

 

Images from the August 2012 SWAT Woodturners' Symposium
By: KochUSA
August 27, 2012 · 1,803 views

These are images from the August 24-26, 2012 SWAT Symposium in Waco, TX. Most of the video shows the woodturnings submitted to the Instant Gallery by attendees to the symposium, including the boxes donated by attendees for Beads of Courage. There is also video of Johannes Michelsen turning a wooden cowboy hat.

 

SWAT 2012 - Day 3
By: wortheffort
August 26, 2012 · 794 views

Today was dedicated to lectures by Cindy Drozda. Fantastic finials and a cool colored vessel.

 

SWAT 2012 - Day 2
By: wortheffort
August 25, 2012 · 904 views

Second Day of lectures, demos and tool oogling. Today I've got some shots from the vendor area and new items in the Instant Gallery.

 

SWAT 2012 - Day 1 (Southwest Association of Turners)
By: wortheffort
August 25, 2012 · 3,158 views

My first day of SWAT 2012. Lecture from Andy Chan about basic segmented turning and the entire afternoon with Todd Hoyer discussing the characteristics of wood and the scary delight of turning crotches. Plus a lot of inspiration from the instant gallery. - Shawn Graham - wortheffort.com

 

WGNC July 2012 gallery critique
By: weekendturner.com
July 13, 2012 · 152 views

WGNC Member Lars Nyland critiques member offerings for the instant gallery at the July 12, 2012 meeting of the Woodturnersguild.com of North Carolina.

 

2012 AAW Symposium Instant Gallery
By: Jeffrey Schnell
July 08, 2012 · 1,240 views

Well I finally got my new laptop up and running. Here's the link to almost 1300 photos I took of the Instant Gallery, the video(s) of the pictures will be out soon too on my youtube channel. Also I have break up the pictures in chunks of 100 so that they cross post to my Facebook account http://www.facebook.com/jeffrey.schnell . Feel free to download the pictures via the link on posterous http://jschnell1203.posterous.com/ and if you need a bigger version of any of the pictures just email the name of the picture and which gallery it's in and I'll email it to you.

 

WGNC demo: Steve Driggers on drying wood
By: weekendturner.com
June 18, 2012 · 3,713 views

WGNC Member Steve Driggers gives a demo on drying green wood at the June 14, 2012 meeting of the Woodturnersguild.com of North Carolina

 

WGNC June 2012 gallery critique
By: weekendturner.com
June 18, 2012 · 162 views

WGNC Member Steve Driggers critiques member offerings for the instant gallery at the June 14, 2012 meeting of the Woodturnersguild.com of North Carolina.

 

WGNC April 2012 Gallery Critique
By: weekendturner.com
April 13, 2012 · 765 views

WoodturnersGuild.com member Chris Boerner critiques member gallery offerings at the April 12, 2012 meeting in Raleigh, NC

 

Out of the Wood - Exhibit Installation April 2, 2012
By: Chas Thornhill
April 07, 2012 · 1,585 views

This is a timelapse video of the installation of my first one-man woodturning exhibit. This video spans roughly 8 1/2 hours and shows the artistic director of the gallery - William Parks - and I going from bare walls to finished installation. Special Thanks goes out to William Park and PFAMily Visual and Performing Arts for the opportunity to exhibit my work in a gallery setting.

 

Totally Turning 2012 Gallery
By: Jeffrey Schnell
April 05, 2012 · 3,037 views

These are the video of the pictures I took last weekend at Totally Turning 2012 Gallery (www.totallyturning.com)

 

Matt Clarke, March 12, 2012, Nutmeg Woodturners
By: NutmegWoodturners
April 02, 2012 · 213 views

Matt Clarke demonstrating Hollowing Tools at the March 12th, 2012 meeting of the Nutmeg Woodturners League in Brookfield CT.

 

'As The Wood Turns' Exhibit by the Dallas Area Woodturners
By: KochUSA
March 22, 2012 · 2,456 views

The Dallas Area Woodturners' exhibit of members artistic woodturnings at the Art Centre of Plano, Texas This is the second exhibit that the Dallas Area Woodturners have had there.

 

WGNC March 2012 Gallery Critique
By: weekendturner.com
March 09, 2012 · 259 views

WoodturnersGuild.com member Chris Boerner critiques member gallery offerings at the March 7,2012 meeting in Raleigh, NC

 

2012 Symposium in San Jose
By: American Association of Woodturners
February 13, 2012 · 15,565 views

Learn more about the American Association of Woodturners at woodturner.org.

 

WGNC demo: Mark Sillay on technique & finials
By: weekendturner.com
February 12, 2012 · 15,053 views

WoodturnersGuild.com welcomes Georgian Mark Sillay, February 9th, at the NC State Craft Center on Feb. 9, 2012

 

WGNC February 2012 gallery critique
By: weekendturner.com
February 10, 2012 · 1,015 views

WoodturnersGuild.com member Alan Leeland critiques member gallery offerings at the Feb. 9, 2012 meeting in Raleigh, NC

 

2011 Australian Woodturning Exhibition
By: WoodTurningAustralia
December 17, 2011 · 10,657 views

This is the 2011 Australian Woodturning Exhibition showcase for all the winners, for more information for the upcoming 2012 Woodturning Exhibition please visit http://www.theaustralianwoodturningexhibition.net

 

2010 Australian Woodturning Exhibition
By: WoodTurningAustralia
December 16, 2011 · 168,323 views

This is the 2010 Australian woodturning exhibition showcase from all the winners, watch and enjoy!

 

2009 Australian Woodturning Exhibition
By: WoodTurningAustralia
December 14, 2011 · 6,025 views

A showcase of all the prize winners of the 2009 Australian Wood Turning Exhibition.

 

Keith Tompkins, January 10th, 2011, Nutmeg Woodturners
By: NutmegWoodturners
December 01, 2011 · 534 views

Keith Tompkins demonstrating his new V Skew at the January 10th, 2011 meeting of the Nutmeg Woodturners League in Brookfield CT. For more photos see http://www.nutmegwoodturners.com

 

WGNC demo: Lars Nyland turns & burns
By: weekendturner.com
November 11, 2011 · 5,980 views

WGNC member Lars Nyland demonstrates his turning and burning technique on a hollow sphere at the Nov. 10 2011 meeting of WoodturnersGuild.com of North Carolina.

 

WGNC November 2011 gallery critique
By: weekendturner.com
November 11, 2011 · 323 views

WGNC member Alan Leland critiques member gallery items at the November 2011 meeting of the guild.

 

WGNC Member Jigs - March 2011
By: weekendturner.com
November 07, 2011 · 1,946 views

Members of the Woodturners Guild of NC describe their prized woodturning jigs at the March meeting.

 

WGNC Don Lydens Demo
By: weekendturner.com
November 07, 2011 · 821 views

WGNC member Don Leydens demonstrates techniques for enhancing your woodturning, including dying and texturing, at the October 13 club meeting.

 

NC Woodturning Symposium 2011 Gallery
By: weekendturner.com
November 07, 2011 · 7,899 views

A walk through the 2011 NC Woodturning Symposium's Instant Gallery

 

20111014-15-Northeastern OTI Meeting
By: Jeffrey Schnell
October 20, 2011 · 576 views

20111014-15-Northeastern Ornamental Turning Meeting at David Lindow's

 

WGNC October 2011 Gallery Critique
By: weekendturner.com
October 13, 2011 · 308 views

WGNC VP Chris Boerner critiques the instant gallery offerings from members at the October 2011 club meeting in Raleigh.

 

SWAT 2011 - Day 3 (Southwest Area Turners) Woodturning Symposium
By: wortheffort
September 16, 2011 · 2,561 views

The final day at the woodturning symposium. A trip thru the market place ended with me spending too much money. Guess that was expected. The final lectures where great. A good ending that had me jonesing to get home and turn. I'll be making acorn birdhouses soon.

 

SWAT 2011 - Day 2 (Southwest Area Turners) Woodturning Symposium
By: wortheffort
September 15, 2011 · 9,314 views

SWAT 2011 Woodturning Symposium. Unbelievably even more showed up at the Instant Gallery today. It was truly inspiring. Most of todays lectures were great though a few left me dozy. Overall this is going well.

 

SWAT 2011 - Day 1 (Southwest Area Turners) Woodturning Symposium
By: wortheffort
September 15, 2011 · 22,781 views

A little video about my first day at the woodturning symposium in Waco, TX 2011. I just downloaded the iMovie app and was playing around. But the event itself was truly interesting and the Instant Gallery, awesome.

 

WGNC September 2011 Gallery Critique
By: weekendturner.com
September 11, 2011 · 211 views

Woodturners Guild of North Carolina September 2011 Member Gallery Critique by club member Frank Penta.

 

SB Woodturning: 25th AAW Symposium Recap
By: SBWoodturning
July 26, 2011 · 6,265 views

A recap of the SB Woodturning Product Launch at the 25th annual American Association of Woodturners Symposium.

 

AAW Symposium 2011
By: Jeffrey Schnell
June 27, 2011 · 4,085 views

Pictures I took at the American Association of Woodturners (AAW) http://www.woodturner.org/ Symposium 2011, to look at the pictures http://jschnell1203.posterous.com

 

June2011_GalleryCritique2.MOV
By: weekendturner.com
June 11, 2011 · 75 views

Professional woodturner Alan Leland critiques member offerings from the instant gallery at the June 2011 meeting of the Woodturners Guild of North Carolina. 2 of 2

 

June2011_GalleryCritique1.MOV
By: weekendturner.com
June 11, 2011 · 116 views

Professional woodturner Alan Leland critiques member offerings from the instant gallery at the June 2011 meeting of the Woodturners Guild of North Carolina. 1 of 2

 

WGNC May 2011 Gallery Critique
By: weekendturner.com
May 14, 2011 · 210 views

WGNC Vice President Chris Boerner critiques pieces from members at the May 12 meeting g of the Woodturners Guild of North Carolina.

 

WGNC Chris Boerner Sample pieces May 12
By: weekendturner.com
May 14, 2011 · 535 views

WGNC Vice President Chris Boerner demonstrated his turning techniques and design considerations at the May 12 meeting of the Woodturners Guild of North Carolina. This short clip shows sample pieces he brought to the meeting.

 

WGNC Chris Boerner demonstration May 12, Clip9
By: weekendturner.com
May 14, 2011 · 337 views

WGNC Vice President Chris Boerner demonstrates his turning techniques and discusses bowl-bottom design considerations at the May 12 meeting of the Woodturners Guild of North Carolina. Part 9 of 9

 

WGNC Chris Boerner demonstration May 12, Clip8
By: weekendturner.com
May 14, 2011 · 254 views

WGNC Vice President Chris Boerner demonstrates his turning techniques and discusses bowl-bottom design considerations at the May 12 meeting of the Woodturners Guild of North Carolina. Part 8 of 9

 

WGNC Chris Boerner demonstration May 12, Clip7
By: weekendturner.com
May 14, 2011 · 222 views

WGNC Vice President Chris Boerner demonstrates his turning techniques and discusses bowl-bottom design considerations at the May 12 meeting of the Woodturners Guild of North Carolina. Part 7 of 9

 

WGNC Chris Boerner demonstration May 12, Clip6
By: weekendturner.com
May 13, 2011 · 300 views

WGNC Vice President Chris Boerner demonstrates his turning techniques and discusses bowl-bottom design considerations at the May 12 meeting of the Woodturners Guild of North Carolina. Part 6 of 9

 

WGNC Chris Boerner demonstration May 12, Clip5
By: weekendturner.com
May 13, 2011 · 525 views

WGNC Vice President Chris Boerner demonstrates his turning techniques and discusses bowl-bottom design considerations at the May 12 meeting of the Woodturners Guild of North Carolina. Part 5 of 9

 

WGNC Chris Boerner demonstration May 12, Clip4
By: weekendturner.com
May 13, 2011 · 261 views

WGNC Vice President Chris Boerner demonstrates his turning techniques and discusses bowl-bottom design considerations at the May 12 meeting of the Woodturners Guild of North Carolina. Part 4 of 9

 

WGNC Chris Boerner demonstration May 12, Clip3
By: weekendturner.com
May 13, 2011 · 279 views

WGNC Vice President Chris Boerner demonstrates his turning techniques and discusses bowl-bottom design considerations at the May 12 meeting of the Woodturners Guild of North Carolina. Part 3 of 9

 

WGNC Chris Boerner demonstration May 12, Clip2
By: weekendturner.com
May 13, 2011 · 423 views

WGNC Vice President Chris Boerner demonstrates his turning techniques and discusses bowl-bottom design considerations at the May 12 meeting of the Woodturners Guild of North Carolina. Part 2 of 9

 

WGNC Chris Boerner demonstration May 12, Clip1
By: weekendturner.com
May 12, 2011 · 952 views

WGNC Vice President Chris Boerner demonstrates his turning techniques and discusses bowl-bottom design considerations at the May 12 meeting of the Woodturners Guild of North Carolina. Part 1 of 9

 

pièces du concours de ATBQ 2011
By: Jérôme Hamel
May 01, 2011 · 2,303 views

voici les pièces du concours annuel de L'association des tourneur sur bois du Québec (ATBQ) 2011. This is the pieces of the annual woodturning contest of the association of woodturner of Québec.

 

2011-04-16-At Walter Balliet's Workshop
By: Jeffrey Schnell
April 17, 2011 · 2,142 views

These are the pictures I took At Walter Balliet's Workshop on 2011-04-16 I spent most of Saturday with him talking about his Rose Engine Lathe. I'm hoping to spend some more time with him and have him demonstrate it working so that I can video it. Here's the pictures that this video was made from.

 

WGNC Jerry Measimer Wood Hat demo Intro
By: weekendturner.com
April 17, 2011 · 1,240 views

Southern Piedmont Woodturner Jerry Measimer demonstrates his process for creating a cowboy hat out of a bowl blank at the April 13 meeting of Woodturners Guild of North Carolina. In this clip Jerry talks about his history and early experiences in woodturning. http://woodturnersguild.com

 

WGNC Jerry Measimer Wood Hat demo 1 of 5
By: weekendturner.com
April 17, 2011 · 3,876 views

Southern Piedmont Woodturner Jerry Measimer demonstrates his process for creating a cowboy hat out of a bowl blank at the April 13 meeting of Woodturners Guild of North Carolina. http://woodturnersguild.com

 

WGNC Jerry Measimer Wood Hat demo 5 of 5
By: weekendturner.com
April 17, 2011 · 6,444 views

Southern Piedmont Woodturner Jerry Measimer demonstrates his process for creating a cowboy hat out of a bowl blank at the April 13 meeting of Woodturners Guild of North Carolina. http://woodturnersguild.com

 

WGNC Jerry Measimer Wood Hat demo 4 of 5
By: weekendturner.com
April 17, 2011 · 1,617 views

Southern Piedmont Woodturner Jerry Measimer demonstrates his process for creating a cowboy hat out of a bowl blank at the April 13 meeting of Woodturners Guild of North Carolina. http://woodturnersguild.com

 

WGNC Jerry Measimer Wood Hat demo 3 of 5
By: weekendturner.com
April 17, 2011 · 1,864 views

Southern Piedmont Woodturner Jerry Measimer demonstrates his process for creating a cowboy hat out of a bowl blank at the April 13 meeting of Woodturners Guild of North Carolina. http://woodturnersguild.com

 

WGNC Jerry Measimer Wood Hat demo 2 of 5
By: weekendturner.com
April 17, 2011 · 2,008 views

Southern Piedmont Woodturner Jerry Measimer demonstrates his process for creating a cowboy hat out of a bowl blank at the April 13 meeting of Woodturners Guild of North Carolina. http://woodturnersguild.com

 

Totally Turning & Northeastern Woodworkers Assoc Show 2011 Instant Gallery
By: Jeffrey Schnell
March 29, 2011 · 769 views

These are the video/pictures I took at Totally Turning 2011 http://totallyturning.com/ and Northeastern Woodworkers Association's Show http://nwawoodworkingshow.org/ here's the pictures http://jschnell1203.posterous.com

 

AAW 25th Anniversary Woodturning Symposium
By: American Association of Woodturners
January 21, 2011 · 39,005 views

AAW's 25th anniversary symposium in Saint Paul, Minnesota promises to be the biggest and best yet. This new video presentation previews the lineup of demonstrators and other attractions.

 

Gewerbe-Schau-Drechseln Pichl bei Wels
By: johann340
December 11, 2010 · 2,909 views

Vorführung bei der Firma Mag.art. Alois Sammer Innenarchitektur, Tischlerei Schmiedsberg 3 A-4632 Pichl bei Wels Zahlreiche Kunden folgden der Einladung und staunten über das Drechseler-Handwerk.

 

Das Große Handwerker und Drechslertreffen Österreich.
By: johann340
November 28, 2010 · 3,292 views

Das Große Handwerker und Drechslertreffen Österreich ist bei der Fa. Neureiter in Kuchl. Es kamen über 4000 Besucher und informierten sich über die neuesten Techniken der Maschinen, Werkzeuge, Drechsler - Kurse.

 

2010 AAW Symposium Techniques Volume Two
By: American Association of Woodturners
November 07, 2010 · 2,914 views

This is a short intro to the full-length DVD available at www.woodturner.org

 

2010 AAW Symposium Techniques Volume One
By: American Association of Woodturners
November 07, 2010 · 1,680 views

This is a short intro to the full-length DVD available at www.woodturner.org

 

2010 AAW Symposium Instant Gallery & Critique
By: American Association of Woodturners
November 07, 2010 · 11,786 views

This is a short intro to the full-length DVD available at www.woodturner.org

 

2009 AAW Symposium Techniques Volume Two
By: American Association of Woodturners
November 07, 2010 · 464 views

This is a short intro to the full-length DVD available at www.woodturner.org

 

2009 AAW Symposium Techniques Volume One
By: American Association of Woodturners
November 07, 2010 · 1,042 views

This is a short intro to the full-length DVD available at www.woodturner.org

 

2009 AAW Symposium Instant Gallery & Critique
By: American Association of Woodturners
November 07, 2010 · 1,458 views

This is a short intro to the full-length DVD available at www.woodturner.org

 

2010 AAW FirstState Woodturners Collaborative Project
By: Jeffrey Schnell
July 09, 2010 · 690 views

This is the FirstState Woodturners Collaborative Project entry for the 2010 AAW Symposium.

 

2010 AAW Woodturning Symposium
By: Jeffrey Schnell
June 20, 2010 · 3,713 views

The 2010 AAW Woodturning Symposium photos http://www.flickr.com/photos/jschnell1203

 

Don Lindsley, April 17, 2010 - Part 7 - LIWA Meeting
By: LIWoodturners
May 09, 2010 · 439 views

LIWoodturners's shared video file.

 

Don Lindsley, April 17, 2010 - Part 6 - LIWA Meeting
By: LIWoodturners
May 08, 2010 · 313 views

LIWoodturners's shared video file.

 

Don Lindsley, April 17, 2010 - Part 5 - LIWA Meeting
By: LIWoodturners
May 08, 2010 · 284 views

LIWoodturners's shared video file.

 

Don Lindsley, April 17, 2010 - Part 4 - LIWA Meeting
By: LIWoodturners
May 08, 2010 · 280 views

LIWoodturners's shared video file.

 

Don Lindsley, April 17, 2010 - Part 3 - LIWA Meeting
By: LIWoodturners
May 08, 2010 · 289 views

LIWoodturners's shared video file.

 

Don Lindsley, April 17, 2010 - Part 2 - LIWA Meeting
By: LIWoodturners
May 08, 2010 · 268 views

LIWoodturners's shared video file.

 

Don Lindsley, April 17, 2010 - Part 1 - LIWA Meeting
By: LIWoodturners
May 08, 2010 · 401 views

LIWoodturners's shared video file.

 

LIWA Meeting - March 20, 2010 - Part 4 - Show and Tell
By: LIWoodturners
April 17, 2010 · 148 views

LIWoodturners's shared video file.

 

LIWA Meeting - March 20, 2010 - Part 3 - Show and Tell
By: LIWoodturners
April 17, 2010 · 96 views

LIWoodturners's shared video file.

 

LIWA Meeting - March 20, 2010 - Part 2 - Show and Tell
By: LIWoodturners
April 17, 2010 · 106 views

LIWoodturners's shared video file.

 

LIWA Meeting - March 20, 2010 - Part 1 - Show and Tell
By: LIWoodturners
April 16, 2010 · 201 views

 

Jim Diamond - Part 6 - LIWA Meeting - October 28, 2008
By: LIWoodturners
April 14, 2010 · 172 views

LIWoodturners's shared video file.

 

Jim Diamond - Part 5 - LIWA Meeting - October 28, 2008
By: LIWoodturners
April 14, 2010 · 102 views

LIWoodturners's shared video file.

 

Jim Diamond - Part 4 - LIWA Meeting - October 28, 2008
By: LIWoodturners
April 14, 2010 · 96 views

LIWoodturners's shared video file.

 

Jim Diamond - Part 1 - LIWA Meeting - October 28, 2008
By: LIWoodturners
April 14, 2010 · 214 views

LIWoodturners's shared video file.

 

Jim Diamond - Part 8 - LIWA Meeting - October 28, 2008
By: LIWoodturners
April 14, 2010 · 102 views

 

Jim Diamond - Part 3 - LIWA Meeting - October 28, 2008
By: LIWoodturners
April 14, 2010 · 329 views

 

Jim Diamond - Part 2 - LIWA Meeting - October 28, 2008
By: LIWoodturners
April 14, 2010 · 119 views

 

Jim Diamond - Part 7 - LIWA Meeting - October 28, 2008
By: LIWoodturners
April 14, 2010 · 151 views

 

LIWA Meeting - Mar 20, 2010 - Bob Brady - Part 7
By: LIWoodturners
April 11, 2010 · 263 views

 

LIWA Meeting - Mar 20, 2010 - Bob Brady - Part 6
By: LIWoodturners
April 11, 2010 · 270 views

 

LIWA Meeting - Mar 20, 2010 - Bob Brady - Part 5
By: LIWoodturners
April 11, 2010 · 332 views

 

LIWA Meeting - Mar 20, 2010 - Bob Brady - Part 4
By: LIWoodturners
April 11, 2010 · 445 views

 

LIWA Meeting - Mar 20, 2010 - Bob Brady - Part 3
By: LIWoodturners
April 11, 2010 · 407 views

 

LIWA Meeting - Mar 20, 2010 - Bob Brady - Part 2
By: LIWoodturners
April 11, 2010 · 582 views

 

LIWA Meeting - Mar 20, 2010 - Bob Brady - Part 1
By: LIWoodturners
April 11, 2010 · 455 views

 

TotallyTurning2009InstantGallery
By: Jeffrey Schnell
March 30, 2010 · 374 views

TotallyTurning2009InstantGallery

 

TotallyTurning2010InstantGallery
By: Jeffrey Schnell
March 29, 2010 · 1,389 views

TotallyTurning2010InstantGallery

 

Kurs Werkstatt von Johann Deutsch
By: johann340
March 21, 2010 · 3,586 views

In diesem Video verwendete Christian ein frisches nasses Eichenholz. --------------------------Kurs Werkstatt. In meiner Drechsel-Kurswerkstätte in 4641 Steinhaus bei Wels biete ich seit 2002 Drechselkurse unter meiner Leitung an. Das Kursspektrum reicht vom Einsteigerkurs über Fortgeschrittenenkurse bis hin zum Naßholz- und Schalendrechseln. Auch Spezialkurse wie zum Beispiel Hohlgefäße mit Alabaster-Steine und Bernstein Drechseln. Diese Kurse sind 1 Personen Intensiv-Kurse, meine ganze Aufmerksamkeit ist auf 1 Person gerichtet. Ich wünsche Ihnen ein schönes betrachten meiner Videos. Mit freundlichen Grüßen Johann Wood Working Woodturning: Finishing & Buffing a Bowl : Walnut Oil Finish for Greenwood Turnings

 

Dallas Area Woodturners Reception at The ArtCentre of Plano.mp4
By: KochUSA
January 10, 2010 · 1,975 views

Video showing the 120 pieces by 24 artists of the Dallas Area Woodturners in an exhibit at the ArtCentre of Plano, Texas

 

Die größten Drechslertage in Österreich ca. 3700 Besucher in 2 Tagen
By: johann340
November 29, 2009 · 2,779 views

Der Größte Drechslertage Veranstalter Österreichs, ist die Firma Neureiter in Kuchl (Salzburg) Über 3700 Besucher kommen jedes Jahr zu dieser Veranstaltung und sehen uns Drechsler beim arbeiten zu.

 

NC Woodturning Symposium 2009
By: Dick Fuller
November 02, 2009 · 962 views

Woodturning Gallery

 

LIWA Meeting Oct 17, 2009 Lenny Mulqueen Part 5
By: LIWoodturners
October 18, 2009 · 102 views

 

LIWA Meeting Oct 17, 2009 Lenny Mulqueen Part 4
By: LIWoodturners
October 18, 2009 · 75 views

 

LIWA Meeting Oct 17, 2009 Lenny Mulqueen Part 3
By: LIWoodturners
October 18, 2009 · 88 views

 

LIWA Meeting Oct 17, 2009 Lenny Mulqueen Part 2
By: LIWoodturners
October 18, 2009 · 88 views

 

LIWA Meeting Oct 17, 2009 Lenny Mulqueen Part 1
By: LIWoodturners
October 18, 2009 · 188 views

 

LIWA Meeting Oct 17, 2009 Show n Tell Part 3
By: LIWoodturners
October 18, 2009 · 62 views

 

LIWA Meeting Oct 17, 2009 Show n Tell Part 2
By: LIWoodturners
October 18, 2009 · 82 views

 

LIWA Meeting Oct 17, 2009 Show n Tell Part 1
By: LIWoodturners
October 18, 2009 · 110 views

 

LIWA Meeting - March 28, 2009 - Show & Tell - Part 1
By: LIWoodturners
September 28, 2009 · 182 views

LIWA Meeting - March 28, 2009 - Show & Tell - Part 1

 

Kunst aus Holz: Galerie Ausstellung in Wels
By: johann340
September 06, 2009 · 2,290 views

1 Tag vor der Präsentation. Kunst Drechslerei Johann Deutsch veranstaltet regelmäßig Ausstellungen und Drechselvorführungen in Österreich und Deutschland wo Drechsler als auch Kunden eingeladen werden. Wood Turning, Workshop.

 

Second slideshow of 2009 AAW Symposium instant gallery
By: SegmentedTurner
July 18, 2009 · 3,765 views

Here are the rest of the photos I took at the 2009 AAW Symposium instant gallery pieces. For more information about my work please visit my web site at http://www.DWMontville.com.

 

First slideshow of 2009 AAW Symposium Instant Gallery photos
By: SegmentedTurner
July 17, 2009 · 5,271 views

Here's the first of two slideshows of the instant gallery at the AAW Symposium held last month in Albuquerque, NM. For more information about my work please visit my web site at http://www.DWMontville.com.

 

2009 AAW Symposium - Day 1 Walkabout
By: American Association of Woodturners
June 29, 2009 · 2,549 views

Day one walkabout of the American Association of Woodturners 2009 symposium

 

2009 AAW Symposium - Resident Artist
By: American Association of Woodturners
June 29, 2009 · 1,239 views

American Association of Woodturners annual symposium, 2009 in Albuquerque, New Mexico. Brief infro to our Resident Artist program.

 

2009 AAW Symposium - Vendor Trade Show
By: American Association of Woodturners
June 29, 2009 · 2,277 views

American Association of Woodturners, annual symposium - Albuquerque, New Mexico. Vendor Trade Show area tour, and a few things that caought my eye.

 

2009 AAW Symposium - Chapter Collaborative
By: American Association of Woodturners
June 26, 2009 · 1,638 views

Local Chapter Collaborative Challenge and Instant Gallery

 

2009 AW Symposium - Opening Ceremonies
By: American Association of Woodturners
June 26, 2009 · 775 views

Brief video on Albuquerque NM symposium opening

 

2008 Symposium Instant Gallery, Critiques and Special Exhibits
By: American Association of Woodturners
March 01, 2009 · 2,501 views

This is a brief snippet from the 1 hour, 28 minute Instant Gallery, Critiques and Special Exhibits DVD of the 2008 AAW Symposium. Click on this link to purchase a copy: http://www.woodturner.org/shop/Products.asp

 

2008 Symposium Techniques Vol 2
By: American Association of Woodturners
February 28, 2009 · 4,212 views

This is a brief snippet from the 1 hour, 31 minute Techniques Volume 2 DVD of the 2008 American Association of Woodturners Symposium. Click on this link to purchase a copy: http://woodturner.org/shop/Products.asp

 

2008 Symposium - Techniques Vol 1
By: American Association of Woodturners
February 28, 2009 · 1,751 views

This is a brief snippitt from the 1 hour, 34 minute Techniques Volume 1 DVD of the 2008 American Association of Woodturners Symposium. Click on this link to purchase a copy: http://woodturner.org/shop/Products.asp

 

2006 Symposium - Techniques Vol 2
By: American Association of Woodturners
February 25, 2009 · 604 views

Highlights from the 2006 AAW Symposium's Techniques Part 2 video in Louisville, Kentucky. The full DVD video may be purchased through the AAW website: http://woodturner.org

 

2006 Symposium - Techniques Vol 1
By: American Association of Woodturners
February 25, 2009 · 1,195 views

Highlights from the 2006 AAW Symposium's Techniques Part 1 video in Louisville, Kentucky. The full DVD video may be purchased through the AAW website: http://woodturner.org

 

2006 Symposium Instant Gallery
By: American Association of Woodturners
February 25, 2009 · 710 views

Highlights from the 2006 AAW Symposium's Instant Gallery in Louisville, Kentucky. The full DVD video may be purchased through the AAW website: http://woodturner.org

 

2007 Symposium Highlights
By: American Association of Woodturners
February 25, 2009 · 716 views

Highlights from the 2007 AAW Symposium in Portland Oregon. The full DVD video may be purchased through the AAW website: http://woodturner.org

 

2008 Symposium - Trade Show
By: American Association of Woodturners
February 25, 2009 · 2,133 views

This video features several new products and supplier offerings from the 2008 AAA symposium trade show area.

 

video de feria en lima
By: PERUTURNER
December 28, 2008 · 400 views

woodturning show in lima

 

2nd part of craft show in lima
By: PERUTURNER
December 05, 2008 · 244 views

craft show

 

craft show in american shool
By: PERUTURNER
December 05, 2008 · 567 views

some of my work in a craft show in american shool

 

Return to Turning Videos

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Cindy Drozda
Woodturning Tool Store
The Studios' of Bradley R.M.

(Click any Ad to go to our Sponsor's Website)