Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Canisters Videos (44)

Sort by

Or click here to: Search All Videos


Walnut Canister In The Round
By: Erik Anderson
September 10, 2018 · 1,609 views

Simple rounded walnut canister - - - - - - Please watch: 'Miter Box Pen' https://www.youtube.com/watch?v iefENj4JGJw - - - - - -

 

Roberts Drechselbude - Deckel für Bierkrüge
By: Roberts Drechselbude
September 08, 2018 · 165 views

Neulich saßen wir im Biergarten und mussten uns gegen aufdringliche. stacheltragende Hautflügler - sprich Wespen - wehren. Diese wollten uns unsere Getränke austrinken. Okay, wir hatten eher Angst, dass wir aus Versehen eine mittrinken. Da haben wir für die Kinder solche Wespenabwehrdeckel gekauft. Aber eigentlich kann man die auch drechseln. Passend für Standardmass- und Standardseidelkrüge. (Also für 1l und 0,5l Glaskrüge ;-) ) Das Holz für die Deckel ist uraltes Ahorn aus einer Wagnerei; die Knöpfle hab ich aus Resten von Macwood und Amaranth gedreht. Finish: Bienen- / Canaubawachsmischung.

 

Woodturn a Kitchen Canister Pt 1
By: Mike Peace Woodturning
August 31, 2018 · 3,227 views

Mike Peace turns a kitchen Canister with a lid on his lathe. He rough woodturns the slinging wet Bradford Pear in this video. I upload new wood turning videos regularly so Ya’ll come back, hear? click here for part 2 https://youtu.be/agdoH6S81pU Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html My go to source for sanding supplies is www.WoodturnersWonders.com

 

Woodturn a Kitchen Canister Pt 2
By: Mike Peace Woodturning
August 31, 2018 · 2,812 views

Mike Peace turns a kitchen Canister with a lid on his lathe. In this video he takes the now dry blank and finish turns it and fits the lid. I upload new wood turning videos regularly so Ya’ll come back, hear? Click here for Part 1 https://youtu.be/9-p2sz7t_Bw Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html Here is a link to my go to source for sanding supplies https://woodturnerswonders.com

 

Woodturning With The Naked Turner Celtic Knot Maple In Purpleheart
By: Erik Anderson
July 03, 2017 · 5,045 views

In this video I turn a celtic knot canister and show my new method and the first one fails so I have to have more patience and make a second one! - - - - - - Please watch: 'Miter Box Pen' https://www.youtube.com/watch?v iefENj4JGJw - - - - - -

 

Naked Turner Quick Look At Textured Canister And Tool I Made
By: Erik Anderson
March 20, 2017 · 1,563 views

Quick look at a textured canister and the tool I made to make the texture - - - - - - Please watch: 'Miter Box Pen' https://www.youtube.com/watch?v iefENj4JGJw - - - - - -

 

Woodturning a Quick Canister from a Scrap Spruce 2x2
By: Jerry Paul
August 01, 2016 · 6,672 views

I found a little piece of spruce 2x2 and decided to do a quick turn. ... Really quick. So quick, I called it a 'quickie'.

 

Woodturning With The Naked Turner Colorized Canister
By: Erik Anderson
May 30, 2016 · 1,165 views

I use a continious ink system ink for a printer I had that no longer works to colorize this canister.

 

Woodturning With The Naked Turner Australian Acacia Canister
By: Erik Anderson
May 30, 2016 · 2,199 views

In this video I turn a piece of Acacia hat Les from Australia sent me recently, into a small canister.

 

Mason Jar Honey Dipper. A project your honey is sure to love!
By: Steve Krumanaker
April 01, 2016 · 10,992 views

An easy project that's also very functional. A honey jar that closes up tight because just like people, ants love honey. Ron Browns decorative mason jar lids https://www.youtube.com/watch?v yuvC5uzpgkY Tim Yoder, honey dipper https://www.youtube.com/watch?v Je209t1Pm1Q

 

Pine Canister for Pen
By: Daniel Vilarino
March 25, 2016 · 968 views

Hola/Hi! Este video está en Inglés, si prefieres verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/GNw0jfh2o44 ***This video is in English*** En este video, he realizado un simple cartucho o estuche para lapicera, con interior forrado en espuma. Básicamente, es como tornear una cajita alargada. ***In this video I have made a pen case or pen holder, the interior is lined with foam. Basically it is like turning an elongated box.*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal

 

Woodturning With The Naked Turner Revisiting The Celtic Knot Canister
By: Erik Anderson
March 05, 2016 · 19,849 views

I share a new Celtic Knot canister short video with a new way I approached it using my chop saw.

 

Приемы работы на токарном по дереву
By: Аleksey Bek
March 04, 2016 · 25,587 views

Наглядный пример работы на токарном станке.. Работа самодельным резцом. Работа отрезным резцом. Сверление фрезой углубления.

 

Самодельный копир для токарного станка по дереву
By: Аleksey Bek
February 29, 2016 · 94,620 views

Предлагаю Вашему вниманию самодельный копир при изготовлении которого я постарался учесть многие нюансы, которые влияют на изготовление одинаковых деталей на токарном станке по дереву. I offer you a homemade copier in the manufacture of which I have tried to take into account the many nuances that affect the production of identical parts on a lathe on wood.

 

Как закрепить деталь в токарном по дереву.
By: Аleksey Bek
February 23, 2016 · 16,512 views

Существует много способов крепления заготовки в токарном по дереву. Хочу поделиться оптимальным и удобным способом с помощью токарного патрона. Возможности токарного патрона.

 

Naked Turner Answers A Subscribers Request For A More Detailed Canister Inlay Video
By: Erik Anderson
February 15, 2016 · 1,774 views

I respond to a viewers request to do a mor detailed version of the canisted inlay lid by making a new one.

 

Naked Turner Hairy Oak Inlay On Canister Lid
By: Erik Anderson
February 13, 2016 · 1,423 views

I show how to do an endgrain inlay of Hairy Oak in a maple canister.

 

Naked Turner Hairy Oak Canister For Les From Australia
By: Erik Anderson
January 17, 2016 · 1,752 views

I made a canister for Les from Australia because he was kind enough to send me some of this Hairy Oak!

 

Naked Turner Chatter Tool Canister
By: Erik Anderson
October 12, 2015 · 2,234 views

Quick video of a finished chatter tool project.

 

Naked Turner Maple Canister with Jasper Inlay
By: Erik Anderson
September 20, 2015 · 2,174 views

Jasper inlay on Maple canister

 

Naked Turner Maple Canister With Zebra Wood Inlay Lid
By: Erik Anderson
September 07, 2015 · 1,902 views

Quick video of a maple canister with zebra wood inlay on the lid.

 

Walnut Small Canister
By: Erik Anderson
January 31, 2015 · 1,934 views

I turn a small walnut canister from some walnut I found at my fathers Montana Dome site.

 

Canister of Unknown Origin...
By: UBWoodman
January 13, 2015 · 36 views

My second canister from a chunk of wax covered billet that was part of a large purchase of wood. It looks like mahogany but I dont know what type of wood it is for sure. I should have lined up the grain before truing up the canister and I had some chatter when adding the lines. I sanded to 550 and put 3 coats of shine juice and two coats of beeswax, even though I prefer pre-cat lacquer this finish is really nice. Thanks for looking and please subscribe.

 

Naked Turner Two Finished Canisters
By: Erik Anderson
January 11, 2015 · 1,010 views

Two small canisters for friends

 

First Canister and Lumber Rack Update
By: UBWoodman
September 22, 2014 · 265 views

Turned my first canister out of mahogany. Came out pretty good, it was a birthday gift to my sister. Completed the vertical lumber rack and got all the wood loaded in, most all of it at least.

 

Woodturning With Naked Turner Special Empartment Canister
By: Erik Anderson
July 29, 2014 · 3,896 views

Special vessel for a small part of my father's ashes.

 

Woodworking With Naked Turner Cutting Board And Canisters
By: Erik Anderson
July 05, 2014 · 1,373 views

Cutting board made from recycled materials and small canisters one inspired by RobbieTheWoodturner

 

Hip To Be Square
By: PeteTGIF
July 03, 2014 · 961 views

I didn't like my first attempt of a coffee mug, as the shape is a little bulky and uncomfortable to drink from. Rather than destroying this cup, I made a new lid so it serves as a container for my coffee pads. This is another turned piece out of some elm wood. While turning I encountered a big void inside which hasn't been obvious from the outside. This changed the design from a dome-shape with finial to a dished top. -------------------- Special thanks to Erik Anderson who gave me the idea to turn this square lid. Visit his channel: https://www.youtube.com/user/KireOgerNosredna Music Funkorama by Kevin McLeod, http://www.incompetech.com Lizenz Creative Commons 3.0 http://creativecommons.org/licenses/by/3.0/deed.de

 

Wood Turning With Naked Turner Maple Canister with Celtic Knot Inlay
By: Erik Anderson
June 01, 2014 · 10,375 views

Celtic Knot Canister

 

Wood Turning With Naked Turner Celtic Knot Canister
By: Erik Anderson
May 27, 2014 · 415,311 views

wood turning

 

Woodturning With Naked Turner Osage Canister
By: Erik Anderson
April 06, 2014 · 2,322 views

Woodturning

 

Salvadanaio
By: Livio Maritati
February 07, 2014 · 9,443 views

Costruzione di un salvadanaio al tornio con sistema di bloccaggio

 

Woodturning With Naked Turner Jarrah Burl Canister
By: Erik Anderson
January 25, 2014 · 139,477 views

Wood Turning Video

 

Wood Turning With Naked Turner Utensil Canister
By: Erik Anderson
December 14, 2013 · 966 views

 

Wood Turning With Naked Turner Mahogany and Maple Canister
By: Erik Anderson
December 14, 2013 · 768 views

 

Wood Turning With Naked Turner Mahogany and Maple Canister
By: Erik Anderson
June 27, 2013 · 686 views

wood turning video

 

Wood Turning With Naked Turner Wobbly Art Canister
By: Erik Anderson
May 27, 2013 · 844 views

Wood Turning Photos

 

Tupelo Floating Peppermint Canister
By: TheHobbyHutt
March 08, 2012 · 111 views

This is something I've wanted to do for a while. I've looked for it from other (better) turners but couldn't find. If anyone has any tips, please tell me. Be nice, I'm a greenhorn. :) Everything I turn is based on a thought or something I have seen someone else turn. Even if I pre-plan a project, it turns out different. I let God guide my hand to shape each piece.

 

Bocal et couvercle assemblÃ
By: Laurent Cortot
January 07, 2012 · 428 views

Mon blog: http://lolotourneur.blogspot.com/ Pièce réalisée en bois de chauffage après 3 semaine de tournages.

 

Woodturning Jar
By: 3earring3
November 22, 2011 · 386 views

 

Woodturning Jar 2
By: 3earring3
June 02, 2011 · 699 views

 

Woodturning Jar
By: 3earring3
June 02, 2011 · 3,056 views

 

making a turned finishing jar
By: thesegmenter
August 12, 2010 · 4,899 views

a step by step tutorial on making an attractive and functional finishing jar.

 

BotGingerJar
By: charlieb1946
May 06, 2009 · 7,398 views

Bot Ginger Jar - a turned wooden ginger jar with lid. But things aren't always what they appear to be . . .

 

Return to Turning Videos

Great Bargains
(ends April 25, 2019)


Square Mini Ergonomic Carbide Turning Tool

On Sale for only $49.99

Save $30.00

List price: $79.99

This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Click here for more information or to purchase

 


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase

 


Rockler Four-Piece Cheese Knife Turning Kit

7/8" On Sale for only $29.99

1 1/4" On Sale for only $39.99

Save $10.00

List Price: $39.99

The cheese cutters are made from food-grade 304 stainless steel and attached to the handles which you turn. The kit includes 1/4-20 threaded inserts. The cheese cutters themselves are dishwasher safe; the handles are easily removed for this purpose.

Click here for more information or to purchase


GVS Elipse P100 Half Mask Respirator with 2 Bonus Filters, Small/Medium

For only $25.99

Save $11.99

List Price: $37.98

These Elipse P100 Half-Mask Respirators from GVS are designed to protect against dust particles, metal fumes, mists, oil and water vapors, and even some micro-organisms. Each mask includes two low-profile filters, which permit a wide field of view, and won't interfere with safety glasses and sanding shields. The filters are easily interchangeable, and replacement filters are readily available.

Click here for more information or to purchase


Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat

For only $32.74

Save $13.70

List Price: $46.44

Shell offers built-in chin protection and extended top-of-head coverage. Highly adjustable headgear tilts visor nearer or farther from face depending on preference and application. Comfortable cell foam on back of headgear. Breathable, removable, washable headband. Comfortably worn with most goggles and respirators.

Click here for more information or to purchase


4-Piece Safety Kit

For only $19.99

Save $15.00

List Price: $34.99

Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Ideal for table saw and router table use. Angled push blocks feature ultra-grippy Bench Cookie pad material. They are great for jointer and router table applications. Table featherboard assists in holding stock against the fence while sawing or routing and helps to reduce kickback. It fits standard 3/4" x 3/8" miter slots found on table saws and router tables, and features expandable miter track bars for maximum holding power.

Click here for more information or to purchase


Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Woodturning Tool Store
From Walnut to Antlers
Woodturning Online

(Click any Ad to go to our Sponsor's Website)