Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Misc Techniques Videos (91)

Sort by

Or click here to: Search All Videos


A DIY Approach To Waterproof Wood
By: As Wood Turns
February 22, 2019 · 2,302 views

http://www.AsWoodTurns.com At last fall's Segmented Woodturning Symposium, I had a discussion with Joe Schlawin. He suggested that acrylic plastic could be used to waterproof certain woodturnings. I needed to know how a solid sheet of acrylic plastic could waterproof the inside of a vase. It turns out that acetone can dissolve acrylic. It takes some time but acetone can dissolve the plastic. For this project, I broke up some acrylic into small pieces with pliers. I had to wear my full face shield. The pieces tended to shatter a fly away including at my face. I put about 3/4 inch of small p

 

Pat Scott - Butterfly Patch Inlay
By: Rocky Mountain Woodturners
February 12, 2019 · 1,536 views

Pat Scott demonstrates how to patch cracks in bowls with a butterfly patch inlay or a stitch. His presentation was to the Rocky Mountain Woodturners on February 7, 2019. He mentions several vendors of materials and templates as well as demonstrating his techniques and tools for repairing a cracked bowl.

 

Turning out of balanced wood
By: MARK Baid
February 06, 2019 · 77 views

This is just my theory but I was told the darker wood is heart wood and the lighter wood is sap wood. This pretty much leads me to believe I am correct in my assumption.

 

Tool review, Half inch boring bar
By: Lyle Jamieson
December 29, 2018 · 741 views

Please welcome a new sponsor Starbond to my YouTube family. I have been using Starbond CA glues for decades. Check them out at https://www.starbond.com Use promo code: LYLE15 at checkout for 15% off discount. Please see my website http://www.lylejamieson.com for all the resources and tool store. Every tool listed has more information details. See not only the right tools but tips and techniques on how to use them. I have archived my articles written for publications and each of my newsletter broadcasts have all the Q&As listed by topic and indexed table of contents. Please support my sponsors. They make it possible for me to produce this content. http://www.hunterwoodturningtool.com 612-718-7926 http://www.thompsonlathetools.com 440-241-6360 http://www.starbond.com 800-900-GLUE(4583)

 

Tool Review, Swivel assembly
By: Lyle Jamieson
December 08, 2018 · 914 views

Please welcome a new sponsor Starbond to my YouTube family. I have been using Starbond CA glues for decades. Check them out at https://www.starbond.com Use promo code: LYLE15 at checkout for 15% off discount. Please see my website http://www.lylejamieson.com for all the resources and tool store. Every tool listed has more information details. See not only the right tools but tips and techniques on how to use them. I have archived my articles written for publications and each of my newsletter broadcasts have all the Q&As listed by topic and indexed table of contents. Please support my sponsors. They make it possible for me to produce this content. http://www.hunterwoodturningtool.com 612-718-7926 http://www.thompsonlathetools.com 440-241-6360 http://www.starbond.com 800-900-GLUE(4583)

 

Woodturning Abrasive Paste - Make Your Own?
By: Mike Peace Woodturning
November 16, 2018 · 6,473 views

Make your own abrasive paste for woodturning from mineral oil, beeswax and a secret abrasive ingredient I will show you. My DIY blend of sanding paste is like liquid sandpaper, works great, is cheaper than commercial alternatives and allows you to get a smooth scratch free finish with less sanding and less sanding dust! I upload new wood turning videos regularly so Ya’ll come back, hear? Click here to watch Daniel Vilarino’s video that inspired this one https://www.youtube.com/watch?v zufgDTh3fis&t 65s Here is a video with more information on how to use abrasive paste https://youtu.be/yI6j

 

finding the centre of your work
By: Nicholas Burt Woodturning
November 14, 2018 · 40 views

I quickly demonstrate how you can find the center of any piece of work you plan to turn if its center turning or face turning. Note: you can easily transfer this method to any shape or size. #woodturning #circle #center

 

How to Hold Small Blanks on the Lathe
By: Mike Peace Woodturning
November 13, 2018 · 4,141 views

I show how to hold small pieces of wood or other material such as bone on the lathe. Perhaps it is an odd shape or you don't have small chuck jaws. There is more than one way to hold blanks on the lathe. I upload new wood turning videos regularly so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Using Abrasive Paste For Woodturning
By: Mike Peace Woodturning
November 09, 2018 · 8,631 views

I demonstrate how you can use a wax based abrasive paste like liquid sandpaper to eliminate fine scratches in your woodturning with less sanding. I also review some of the commercial abrasive pastes on the market: Yorkshire Grit, Dr Kirk's Scratch FREE and UBeaut EEE Ultrashine. Here is a link to a Craft Supplies USA video on Dr.Kirk's Scratch FREE https://www.youtube.com/watch?v APIntEVg3qU Here is where you can buy Yorkshire Grit in the USA www.the walnutlog.com Here is how you can make your own https://youtu.be/y-4t7S67-CI I upload new wood turning videos regularly so Ya’ll come back, he

 

How To 'Raise The Grain'
By: Nicholas Burt Woodturning
November 09, 2018 · 41 views

Follow this vid and learn a great method of achieving a great finish to your wooden projects https://nburtwoodturning.wixsite.com/website-1 #woodturning #raisingthegrain #edinburghwoodturning

 

Dissect a Bowl?
By: Mike Peace Woodturning
October 16, 2018 · 1,473 views

I demonstrate a technique for improving your bowl turning skills – dissect a bowl every now and then. Cut it in half and analyze the shape and wall thickness. Evaluate the weight and balance. I upload new wood turning videos regularly so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Woodturning - Finishing Red Elm Burl
By: Woodturning Arts
October 15, 2018 · 1,417 views

Like/Share/Comment/Subscribe and Thanks for Watching! Subscribers Woodturned Art Submission Format for Consideration 1) Send email with 'Subscribers Art' in the subject line to: rick@woodturningarts.com 2) Must be a current Subscriber and the item must be an original made by you 3) Include Name/City/State/Country if outside US 4) Must be a turned item you turned and be made of wood 5) Brief Description of the item-type wood etc. 6) Your Inspiration if any and how long you've been turning 7) What you learned from my videos or favorite video on this channel 8) One Picture of the Ite

 

Caliper Basics for Woodturners
By: Mike Peace Woodturning
October 05, 2018 · 2,798 views

I explain the differences in various thickness calipers and how to use them in your woodturning. I upload new wood turning videos regularly so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Turning what you cannot see! Woodturning with Sam Angelo
By: WYOMINGWOODTURNER
September 21, 2018 · 4,354 views

In this video Sam covers some options for dealing with end grain or closed forms where it is not easy to see what you are turning. This is a safety issue as well as simply being able to turn comfortably.. Samangelo.com Ron Brown’s Lath accessories https://goo.gl/ZLHUDE Please find my work on these sites: www.wyomingwoodturner.com www.samangelo.com https://www.etsy.com/shop/wyomingwoodturnercom Ron Brown's tools and lathe accessories I offer on my website https://goo.gl/LnxTy7 Wyomingwoodturner site https://goo.gl/UpYhKm

 

Woodturning Red Elm-Selling Your Work Part 6
By: Woodturning Arts
September 11, 2018 · 1,637 views

Like/Share/Comment/Subscribe and Thanks for Watching! Subscribers Woodturned Art Submission Format for Consideration 1) Send email with 'Subscribers Art' in the subject line to: rick@woodturningarts.com 2) Must be a current Subscriber and the item must be an original made by you 3) Include Name/City/State/Country if outside US 4) Must be a turned item you turned and be made of wood 5) Brief Description of the item-type wood etc. 6) Your Inspiration if any and how long you've been turning 7) What you learned from my videos or favorite video on this channel 8) One Picture of the Ite

 

Woodturning Mimosa Selling Your Work Part 5
By: Woodturning Arts
September 05, 2018 · 1,305 views

Like/Share/Comment/Subscribe and Thanks for Watching! Subscribers Woodturned Art Submission Format for Consideration 1) Send email with 'Subscribers Art' in the subject line to: rick@woodturningarts.com 2) Must be a current Subscriber and the item must be an original made by you 3) Include Name/City/State/Country if outside US 4) Must be a turned item you turned and be made of wood 5) Brief Description of the item-type wood etc. 6) Your Inspiration if any and how long you've been turning 7) What you learned from my videos or favorite video on this channel 8) One Picture of the Ite

 

Divide and Conquer - Woodturning
By: Mike Peace Woodturning
September 04, 2018 · 2,571 views

How to use a set of dividers in woodturning. Dividers or compass is useful in drawing circles but more importantly in woodturning, for transferring measurements. This video shows how to use dividers safely. I upload new wood turning videos regularly so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Woodturning - A Need for Speed?
By: Mike Waldt
September 04, 2018 · 14,282 views

My thoughts on lathe speed and the different effects it has on both your turning experience and the quality of cut achieved. Downloadable Speed table Guide PDF: http://www.quest42.co.uk/woodwork/pdf/Speeds.pdf Simon Hope: http://www.hopewoodturning.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Easy Wood Tools: http://www.easywoodtools.com/ Easy Wood Tools at Amazon UK: https://www.amazon.co.uk/Easy-Wood-Tools-Chuck-M33-3-5/dp/B07664VKFB/ref lp_8318174031_1_13?srs 8318174031&ie UTF8&qid 1529428204&sr 8-13 UKIWS Facebook : https://www.facebook.com/ukiws/ Website: http://www.ukiws.co.uk

 

Woodturning Maple and Selling Your Work Part 4
By: Woodturning Arts
September 03, 2018 · 1,663 views

Like/Share/Comment/Subscribe and Thanks for Watching! Subscribers Woodturned Art Submission Format for Consideration 1) Send email with 'Subscribers Art' in the subject line to: rick@woodturningarts.com 2) Must be a current Subscriber and the item must be an original made by you 3) Include Name/City/State/Country if outside US 4) Must be a turned item you turned and be made of wood 5) Brief Description of the item-type wood etc. 6) Your Inspiration if any and how long you've been turning 7) What you learned from my videos or favorite video on this channel 8) One Picture of the Ite

 

Woodturning-Selling Your Work Part 3-Finishing Large Walnut
By: Woodturning Arts
September 01, 2018 · 1,572 views

Like/Share/Comment/Subscribe and Thanks for Watching! Subscribers Woodturned Art Submission Format for Consideration 1) Send email with 'Subscribers Art' in the subject line to: rick@woodturningarts.com 2) Must be a current Subscriber and the item must be an original made by you 3) Include Name/City/State/Country if outside US 4) Must be a turned item you turned and be made of wood 5) Brief Description of the item-type wood etc. 6) Your Inspiration if any and how long you've been turning 7) What you learned from my videos or favorite video on this channel 8) One Picture of the Ite

 

Woodturning a Consistent Wall Thickness
By: Woodturning Arts
June 17, 2018 · 1,573 views

Like/Share/Comment/Subscribe and Thanks for Watching! Important Links: About This Channel: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/about?view_as subscriber Channel Discussion Page: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/discussion?view_as subscriber My Playlists: https://www.youtube.com/channel/UCQPVprk20NsokTfWCW94NrA/playlists?view_as subscriber Audio Information Track #1 Clover 3 by Vibe Mountain

 

pullcutpushcut
By: Al Hockenbery
May 11, 2018 · 104 views

Clip from a natural edge crotch bowl demo for the Sarasota woodturners 21 March 2018. show how i explain the pull cut and push cut

 

Fun spring project using wood dye and hot glue to make rain drops.
By: Carl Jacobson
May 04, 2018 · 8,111 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg This was a fun project, I got to used several different techniques making it. I did a little spindle turning, off-center turning, craving, and wood dye to make this piece. I even used the hot glue gun to make rain drops. It stands about 4 1/2' tall, and is made out of Maple Bocote and driftwood. Tools used in this video ------------------------ Lathe Robust: http://www.turnrobust.com/ Easy Wood Tools: http://www.easywoodtools.com/ Thompson Lathe Tools: http://thompsonlathetools.com/ Banjo chuck m

 

Barefoot Turner - Lathe Drive Belts - Experiments in Speed
By: Jake Webb
April 25, 2018 · 388 views

These are my experiments in lathe speed and belt adjustment. This is a lathe used by a lot of turners, even though they are painted and named differently, they all come from the same foundry in China. Linked video explains this further. https://www.youtube.com/watch?v PBCugZu_KP4 Inspired by a video from Yuval Lahav. His YouTube channel is linked below. https://www.youtube.com/channel/UC8nJRxAzSqB_j7VYpo0yiBg My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

Metal Etching for the Wood Turner # 126
By: The Wood Whirler
April 23, 2018 · 1,295 views

Thought maybe you guys might want to know how I etch metal.

 

Doing reps. Push ups.....er....push cuts
By: Steve Krumanaker
April 20, 2018 · 192 views

doing a push cut on decorative mason jar lids

 

Mixing Milliput : The two part epoxy putty resin into wood!
By: Nick Zammeti
April 20, 2018 · 42,862 views

So on this video I'm mixing up some Milliput to make something with wood. Milliput is a two part epoxy resin. Enjoy! MAKERS CENTRAL WEBSITE https://goo.gl/x3yVjm Jimson's Stuff (the milliput king) https://www.youtube.com/channel/UC6h82LH3PtdiSHaj_7f09Fg MY WEBSITE http://www.nzwoodturning.co.uk/ FOLLOW ME ON INSTARGRAM https://www.instagram.com/nickzammeti/?hl en MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/c

 

Orient to get the most in woodturning by Al Furtado
By: Rebel Turner
April 15, 2018 · 4,055 views

Orient to get the most out of your woodturning. I show how to get a 7' inch bowl out of a 6' log

 

Signing Your Woodturning
By: Mike Peace Woodturning
March 30, 2018 · 10,114 views

Mike explains why we sign our wood turned pieces and the different ways he and other woodturners handle this. I upload new wood turning videos regularly so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

# 290 Crank it up!
By: Cap'n Eddie Castelin
February 28, 2018 · 3,904 views

Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at capneddiecastelin@gmail.com or www.eddiecastelin.com

 

Cutting Mat is Handy for Craft Knife Use
By: Mike Peace Woodturning
February 27, 2018 · 2,640 views

I demonstrate the advantages of an inexpensive cutting mat when using an Exacto style Craft Knife. I prefer the Fiskars Craft Knife. These can be found in my Amazon Shop. See Link below. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Blunt pencil, sharp gouge, steady hand, steady heart.
By: Theo the Woodturner
February 21, 2018 · 597 views

Never thought sharpening a pencil would become so addictive.

 

Taxable Income from Woodturning?
By: Mike Peace Woodturning
February 06, 2018 · 3,148 views

I talk about federal income taxes for woodturners including the need to file a schedule C with their 1040 for business income. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

The joy of a smooth push cut
By: Roper Woodturning
February 04, 2018 · 36 views

The feeling of getting that perfect push cut on the outside of a bowl.

 

Best end grain sealer I've found so far
By: RickTurns
October 27, 2017 · 36,156 views

I've used various end grain sealers during my years in woodturning. Recently, I started using Titebond woodworkers' glue for sealing logs, and it is the best thing I've used yet for sealing wood. The music during the close of the video, Happy Little Elves by Audionautix, is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Sanding Sealer for Wood Turning
By: Mike Peace Woodturning
September 26, 2017 · 14,726 views

I talk about sanding sealers I use for woodturning and when and why I use them. I upload a new wood turning tip every Wednesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Find a Video on a YouTube Channel
By: Mike Peace Woodturning
August 30, 2017 · 1,716 views

I show how to search my YouTube channel for a specific project or topic. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Donation Tax Deduction Myth Woodturners Believe
By: Mike Peace Woodturning
August 09, 2017 · 2,943 views

I clarify a common tax law misunderstanding many artists in the USA including woodturners have. And it relates to taking a charitable deduction for artistic works including your woodturnings. I upload a new woodturning tip every Wednesday and a woodturning tutorial video each and every Friday so Ya’ll come back, hear? You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Harbor Freight for Woodturners?
By: Mike Peace Woodturning
July 07, 2017 · 75,076 views

I have bought a fair amount of stuff from Harbor Freight for my woodturning. Some a good value and some not so much. Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! I upload a new woodturning tip every Wednesday and a woodturning tutorial video each and every Friday so Ya’ll come back, hear? You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

#130 Repairing Woodturning Defects
By: Stephen Ogle
June 01, 2017 · 15,359 views

I needed to repair a bowl that was cracked and the cracks just kept expanding. This video project shows the method I used to correct this problem.

 

How to sharpen a pencil with a lathe
By: Le PicBois
March 31, 2017 · 9,048 views

Raina's Channel: https://www.youtube.com/channel/UChK5xGod0gVc9G6DVqduw5Q Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois ______________________________________________ Thanks to ALL my supporters on Patreon: Alain Gaudet, Alain Lebarbé, Benoit Pelletier, Brandon Connors, Carl Jacobson, Corey Neuman, Dominic Bender, Elaine Go, Ento Hamelin, Francis LaBrie, Get Hands

 

Coves are Not Just for Spindles
By: Mike Peace Woodturning
December 16, 2016 · 4,373 views

I demonstrate the tools and techniques I use for adding coves to woodturned bowls and boxes. I show a number of wood turning projects that I embellished with coves. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Soporte de herramientas con sistema excentrico - torno
By: brunogausa
November 08, 2016 · 4,206 views

 

Add a Few Beads to Woodturning
By: Mike Peace Woodturning
October 14, 2016 · 3,064 views

I demonstrate the tools and techniques I use to add beads to bowls, hollow forms and boxes or other woodturning projects. I show how to make and use a beading tool from an old spindle gouge. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Split Turning Revisited
By: Mike Peace Woodturning
October 13, 2016 · 2,733 views

I explain how I use an old technique for turning a piece that will provide two identical halves perhaps for furniture or architectural work. Sawing is difficult. My yard art project requiring this technique is a strange one! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Vaciado de testa - Tercer método (herramienta plana)
By: brunogausa
October 12, 2016 · 4,493 views

Vaciado de testa con herramienta plana y formón de filo recto

 

How to Use a Hot Melt Glue for Woodturning
By: Mike Peace Woodturning
August 12, 2016 · 11,764 views

Mike demonstrates how to use a new hot melt glue gun for woodturning tasks for which you might use double sided tape, CA or carpenters glue. Want to support my channel? Buy this product through my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! Check out my blog for demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information. MikePeaceWoodturning.blogspot.com

 

Hand Cut Spirals
By: The Woodshop
April 11, 2016 · 128,327 views

In this video I demonstrate how to hand cut spirals using a jig I made. Jim Overton https://www.youtube.com/channel/UC6h82LH3PtdiSHaj_7f09Fg My Project Channel https://www.youtube.com/user/haydenHD/featured I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon https://www.patreon.com/CarlJacobson Schedule demos, and one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.com/ Wood Turn

 

Contra punta giratoria y punta de arrastre
By: Adam Woodturner
March 15, 2016 · 17,607 views

- Captured Live on Ustream at http://www.ustream.tv/channel/woodturningwood

 

Tool Control
By: Jim Ballard
January 09, 2016 · 1,143 views

My method of tool control.

 

Tokar Art 17 Woodturning Spiral On Fire
By: Dipa Das
April 26, 2015 · 11,452 views

This video is a Test of my new tools - Bowls Gouge & Spiraling Tool - from Crown company.. And Fire on Wood.. on Ash Wood.. Toto video je o testovaní nových nástrojov v našej dieľni - Struh na misky a Dlátko na robenie Špirál a textúr - od firmy Crown.. a Oheň na dreve.. Jaseňovom dreve..

 

Arte en Torno-Como hacer el cabo para un martillo parte 2 de 2
By: Arte en Torno
October 05, 2014 · 20,385 views

En este proyecto 'Como hacer el cabo para un martillo', Cesar nos mostrará en 4 pasos como hacerlo, mediante la técnica del torneado longitudinal y el descentrado de la pieza en dos puntos.

 

Arte en Torno-Como hacer el cabo para un martillo parte 1 de 2
By: Arte en Torno
October 05, 2014 · 22,186 views

En este proyecto 'Como hacer el cabo para un martillo', Cesar nos mostrará en 4 pasos como hacerlo, mediante la técnica del torneado longitudinal y el descentrado de la pieza en dos puntos.

 

Arte en Torno - Como tornear una cuchara parte 2de2
By: Arte en Torno
September 28, 2014 · 243,604 views

En este proyecto 'Como tornear una cuchara', Cesar nos va a mostrar paso a paso, como lograr hacerlo con una pieza de madera mediante la utilización de dispositivos fáciles de construir.

 

Arte en Torno - Como tornear una cuchara parte 1de2
By: Arte en Torno
September 28, 2014 · 626,352 views

En este proyecto 'Como tornear una cuchara', Cesar nos va a mostrar paso a paso, como lograr hacerlo con una pieza de madera mediante la utilización de dispositivos fáciles de construir.

 

Arte en Torno - Como tornear la pata para una mesa Parte 2de2
By: Arte en Torno
September 24, 2014 · 234,250 views

En este vídeo, Cesar nos mostrará el torneado de una pata para una mesa, mediante la técnica del torneado longitudinal, utilizando herramientas de corte (Sesgos) y herramientas de desbaste (Gubias). Mediante el uso técnico de las herramientas de corte, veremos como, prácticamente desaparece el uso de la lija.

 

Arte en Torno - Como tornear la pata para una mesa Parte 1de2
By: Arte en Torno
September 24, 2014 · 21,589 views

En este vídeo, Cesar nos mostrará el torneado de una pata para una mesa, mediante la técnica del torneado longitudinal, utilizando herramientas de corte (Sesgos) y herramientas de desbaste (Gubias). Mediante el uso técnico de las herramientas de corte, veremos como, prácticamente desaparece el uso de la lija.

 

Arte en Torno-'Como hacer un candelabro' 3 de 3
By: Arte en Torno
September 16, 2014 · 68,653 views

Presentaremos paso a paso como hacer este tipo de piezas que a simple vista no pareciera que se pudiera hacer en su totalidad en el torno. 'Candelabro Corazón'

 

Arte en Torno-'Como hacer un candelabro' 2 de 3
By: Arte en Torno
September 16, 2014 · 75,257 views

Presentaremos paso a paso como hacer este tipo de piezas que a simple vista no pareciera que se pudiera hacer en su totalidad en el torno. 'Candelabro Corazón'

 

Arte en Torno - 'Como hacer un candelabro' 1 de 3
By: Arte en Torno
September 16, 2014 · 18,162 views

Presentaremos paso a paso como hacer este tipo de piezas que a simple vista no pareciera que se pudiera hacer en su totalidad en el torno. 'Candelabro Corazón'

 

Spiral Candle Holder( Sawdust Rd. Woodshop )
By: Johnny Boudreau
May 11, 2014 · 4,423 views

Maple and mahogany spiral candle holder. OK, this will be the last spiral video for a wile, I'll try to find something new and interesting for next week. Thanks for watching. Please comment, like, share and subscribe.

 

Double Twist - Sneak Preview
By: Stuart Mortimer
March 23, 2014 · 9,263 views

A sneak peak at the second in the Twist series.

 

Stuart Mortimer - An Introduction To Spiral Work
By: Stuart Mortimer
March 23, 2014 · 7,778 views

Stuart Mortimer internationally renowned wood turner introducing his work and explaining about his soon to be released range of DVD's on turning spiral work. For more information on Stuart and to see his latest work head over to www.stuartmortimer.com.

 

Wood Turning - How to produce a Spiral Twist in Wood Part 2 - cont
By: Stuart Mortimer
January 19, 2014 · 34,534 views

Stuart continues with his series of videos dedicated to teaching wood turners how to produce beautiful spiral work from wood. There are 5 videos in total each one taking you through the process in a series of simple and easy steps demonstrated by Stuart Mortimer renowned wood turner. For more information about Stuart head over to www.stuartmortimer.com and subscribe to receive his newsletter.

 

Wood Turning - How to produce a Spiral Twist in Wood Part 2
By: Stuart Mortimer
January 19, 2014 · 92,234 views

Stuart continues with his series of videos dedicated to teaching wood turners how to produce beautiful spiral work from wood. There are 5 videos in total each one taking you through the process in a series of simple and easy steps demonstrated by Stuart Mortimer renowned wood turner. For more information about Stuart head over to www.stuartmortimer.com and subscribe to receive his newsletter.

 

Wood Turning - How to produce a Spiral Twist in Wood Part 5
By: Stuart Mortimer
January 18, 2014 · 36,302 views

Stuart continues with his series of videos dedicated to teaching wood turners how to produce beautiful spiral work from wood. There are 5 videos in total each one taking you through the process in a series of simple and easy steps demonstrated by Stuart Mortimer renowned wood turner. For more information about Stuart head over to www.stuartmortimer.com and subscribe to receive his newsletter.

 

Wood Turning - How to produce a Spiral Twist in Wood Part 4
By: Stuart Mortimer
January 18, 2014 · 30,668 views

Stuart continues with his series of videos dedicated to teaching wood turners how to produce beautiful spiral work from wood. There are 5 videos in total each one taking you through the process in a series of simple and easy steps demonstrated by Stuart Mortimer renowned wood turner. For more information about Stuart head over to www.stuartmortimer.com and subscribe to receive his newsletter.

 

Wood Turning - How to produce a Spiral Twist in Wood Part 3
By: Stuart Mortimer
January 18, 2014 · 53,918 views

Stuart continues with his series of videos dedicated to teaching wood turners how to produce beautiful spiral work from wood. There are 5 videos in total each one taking you through the process in a series of simple and easy steps demonstrated by Stuart Mortimer renowned wood turner. For more information about Stuart head over to www.stuartmortimer.com and subscribe to receive his newsletter.

 

Wood Turning - How to produce a Spiral Twist in Wood Part 1
By: Stuart Mortimer
January 12, 2014 · 63,250 views

This is the first in a series of videos dedicated to teaching wood turners how to produce beautiful spiral work from wood. There are 5 videos in total each one taking you through the process in a series of simple and easy steps demonstrated by Stuart Mortimer renowned wood turner. For more information about Stuart head over to www.stuartmortimer.com Oh and please 'Like' my video as it helps with You Tube. Thank you. Stuart

 

ahşap torna
By: Ahmet Ozkaraaslan
January 04, 2014 · 904 views

aozkaraaslan65@hotmail.com

 

Ahşap torna
By: Ahmet Ozkaraaslan
January 04, 2014 · 997 views

özel ağaçlardan el emeği göznuru 5323725657

 

Arte en Torno - Perforando en el torno 3/3
By: Arte en Torno
June 04, 2013 · 10,409 views

En esta serie de 3 vídeos se muestra otras utilidades que le podemos dar al torno, y en este caso lo utilizaremos para perforar. Sáquele el mayor provecho a su torno

 

Arte en Torno - Perforando en el torno 2/3
By: Arte en Torno
June 04, 2013 · 60,998 views

En esta serie de 3 vídeos se muestra otras utilidades que le podemos dar al torno, y en este caso lo utilizaremos para perforar. Sáquele el mayor provecho a su torno.

 

Arte en Torno - Perforando en el torno 1/3
By: Arte en Torno
June 02, 2013 · 9,483 views

En esta serie de 3 vídeos se muestra otras utilidades que le podemos dar al torno, y en este caso lo utilizaremos para perforar. Sáquele el mayor provecho a su torno.

 

Arte en Torno - Torneado Cacheteado
By: Arte en Torno
May 30, 2013 · 18,330 views

Esta técnica se le llama - Torneado Cacheteado. Podemos elaborar un sinnúmero de elementos, logrando una cantidad, inimaginable de diseños, de formas geométricas que hasta tu mismo te sorprenderás. No es difícil lograrlo y no necesitas de muchos procesos. Es muy importante partir de un dibujo y que todos los materiales estén, bien mecanizados.

 

Arte en Torno - Dispositivo para tornear piezas en serie
By: Arte en Torno
May 28, 2012 · 50,642 views

La pieza que se esta copiando son cabos para wok. Este dispositivo es llamado en algunos textos de tornería como semáforo o copiador, es simple de construir y es muy práctico para construir piezas en serie, se debe tener en cuenta dos variables importantes: 1. Que tenga un poco más la longitud del elemento que se va a copiar. 2. Que tenga tantas barras como diámetros tenga la pieza a copiar. www.arteentorno.com

 

Arte en Torno - 'Como tornear de forma segura piezas de gran tamaño' Parte 1/4
By: Arte en Torno
April 04, 2012 · 136,324 views

Torneado del cuerpo central de 'Mi bella genio - Colección tornado' (Parte 1) Medidas: Altura 224cm : Diámetro 84cm : Número de segmentos 2.608 Maderas: Pino, Nazareno, Sapán y Cedro.

 

Arte en Torno - Como hacer una pieza a partir de una muestra Parte 8/8
By: Arte en Torno
March 18, 2012 · 16,591 views

Nos encontramos en el taller de Arte en Torno donde mi maestro Cesar les enseña a un grupo de aprendices como tornear una pieza a través de una muestra, utilizando sesgo y gubia, por la técnica de corte y raspado respectivamente.

 

Arte en Torno - Como hacer una pieza a partir de una muestra Parte 7/8
By: Arte en Torno
March 18, 2012 · 15,505 views

Nos encontramos en el taller de Arte en Torno donde mi maestro Cesar les enseña a un grupo de aprendices como tornear una pieza a través de una muestra, utilizando sesgo y gubia, por la técnica de corte y raspado respectivamente.

 

Arte en Torno - Como hacer una pieza a partir de una muestra Parte 6/8
By: Arte en Torno
March 18, 2012 · 30,020 views

Nos encontramos en el taller de Arte en Torno donde mi maestro Cesar les enseña a un grupo de aprendices como tornear una pieza a través de una muestra, utilizando sesgo y gubia, por la técnica de corte y raspado respectivamente.

 

Arte en Torno - Como hacer una pieza a partir de una muestra Parte 5/8
By: Arte en Torno
March 18, 2012 · 10,339 views

Nos encontramos en el taller de Arte en Torno donde mi maestro Cesar les enseña a un grupo de aprendices como tornear una pieza a través de una muestra, utilizando sesgo y gubia, por la técnica de corte y raspado respectivamente.

 

Arte en Torno - Como hacer una pieza a partir de una muestra Parte 4/8
By: Arte en Torno
March 18, 2012 · 15,613 views

Nos encontramos en el taller de Arte en Torno donde mi maestro Cesar les enseña a un grupo de aprendices como tornear una pieza a través de una muestra, utilizando sesgo y gubia, por la técnica de corte y raspado respectivamente.

 

Arte en Torno - Como hacer una pieza a partir de una muestra Parte 3/8
By: Arte en Torno
March 18, 2012 · 10,465 views

Nos encontramos en el taller de Arte en Torno donde mi maestro Cesar les enseña a un grupo de aprendices como tornear una pieza a través de una muestra, utilizando sesgo y gubia, por la técnica de corte y raspado respectivamente.

 

Arte en Torno - Como hacer una pieza a partir de una muestra Parte 2/8
By: Arte en Torno
March 17, 2012 · 16,145 views

Nos encontramos en el taller de Arte en Torno donde mi maestro Cesar les enseña a un grupo de aprendices como tornear una pieza a través de una muestra, utilizando sesgo y gubia, por la técnica de corte y raspado respectivamente.

 

Arte en Torno - Como hacer una pieza a partir de una muestra Parte 1/8
By: Arte en Torno
March 17, 2012 · 22,135 views

Nos encontramos en el taller de Arte en Torno donde mi maestro Cesar les enseña a un grupo de aprendices como tornear una pieza a través de una muestra, utilizando sesgo y gubia, por la técnica de corte y desbaste respectivamente.

 

Wood turning (Gamela em Ipê Amarelo)
By: Silvio de Carvalho
February 03, 2012 · 9,827 views

por Silvio de Carvalho

 

Arte en Torno - Cilindrado y refrentado Torneado de Copa
By: Arte en Torno
January 02, 2012 · 5,164 views

Explicación de como se cilindra y se refrenta un cuadro de madera, mediante la utilización técnica de la gubia y el sezgo. Técnica: Torneado de copa.

 

Arte en Torno-Dispositivo para plato cuadrado
By: Arte en Torno
December 19, 2010 · 21,529 views

Con este dispositivo nos facilita el montaje de un plato cuadrado para mesa centro-(frutero)- Se consigue: Trabajar con seguridad. Nos permite un mecanizado tanto interio como exterior. No quedan huellas en la pieza por sujecion con tornillos. Se puede lograr un buen lijado en el torno.

 

Arte en Torno - Dispositivo parte 2 de 2
By: Arte en Torno
November 17, 2010 · 1,212 views

Con este dispositivo se inclina la pieza a 53 con el fin de hacerle 5 perforaciones de 60 mm de diámetro según pedido del cliente.

 

Arte en Torno - Dispositivo parte 1 de 2
By: Arte en Torno
November 17, 2010 · 1,400 views

Con este dispositivo se inclina la pieza a 53 con el fin de hacerle 5 perforaciones de 60 mm de diámetro según pedido del cliente.

 

la coupe
By: tournar
January 11, 2008 · 942 views

l'interrieur de la coupe

 

Return to Turning Videos

Great Bargains
(ends March 28, 2019)


Cut-Resistant Gloves with Touchscreen Technology

On Sale for only $6.99

Save $3.00

List price: $9.99

High-tech fiber weave resists cuts and abrasion—compatible with touch screens so you can leave them on when using your devices.

Click here for more information or to purchase

 


Mini Ergonomic Carbide Turning Tools

On Sale for only $129.99

Save $90.00

List Price: $219.99

This three piece set has comfortable rubber handles which provide excellent control and reduce fatigue—replaceable carbide tips require no sharpening.

Click here for more information or to purchase

 


Robert Sorby Stebcentres with #2 Morse Taper

7/8" On Sale for only $55.99

1 1/4" On Sale for only $63.99

Save at least $14.00

7/8" List Price: $69.99

1 1/4" List Price: $79.99

The Sorby Steb Center incorporates a spring loaded point in stainless steel and a set of razor sharp teeth that bite into the workpiece. The Stebcentre may also be removed without the need to stop and re-start the lathe. Simply wind back the tail stock and the piece can be withdrawn safely.

Click here for more information or to purchase


Nova Comet II 12'' x 16-1/2'' Midi Lathe with Chuck and 5-Piece Turning Set

For only $599.99

Save $50.00

List Price: $649.99

Value-added combo package pairs a compact, versatile lathe with a chuck and 5-piece set of mini turning tools! Total package value $754.97!

Click here for more information or to purchase


Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Cindy Drozda
Rubber Chucky Products
Sheffield Woodturning

(Click any Ad to go to our Sponsor's Website)