Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Pots Videos (109)

Sort by

Or click here to: Search All Videos


Wood Turning fence post into a large pot
By: Fox the wood turner
April 11, 2019 · 200 views

SECOND DAY ON THE LATHE WOOD TURNING A FENCE POST INTO A LARGE BOWL PLEASE LIKE SHARE AND SUBSCRIBE THANKS FOR WATCHING

 

Woodturning - Lidded Yew / Bur Yew Pot
By: William Hunt
April 11, 2019 · 3,457 views

Turning a Yew Pot with a Bur Yew Lid. This project mostly developed as I went along. I had intended a lidded bowl then changed my mind as a pot seemed to fit the natural edge better. I had to blacken the natural edge of the rim as I marked it with a marker pen for the bandsaw therefore I needed to hide it. The black was too dark so had to tone it down with a wire brush. William Hunt woodturner. Finally I added a small simple, spherical knob which I also blackened and left unfinished to match the natural edge rim. Not there most unpleasant project I have ever turned but not the prettiest either. If you turn it upside down , it resembles WW2 German Helmet! #LiddedYew #WilliamHunt #WilliamHuntWoodturner #LatheCraft #WilliamHuntWoodturning #YorkshireGrit #HampshireSheen #BurYew

 

Woodturning - 'Cue' the Action.
By: Peter Woodbine
April 06, 2019 · 324 views

Woodturning, Making a potpourri pot from an old Snooker table leg. ( I didn't really steal it.) Attempting to make a Pewter lid which was a big fail. Also embellishing the pot with some 'Gems' I found in a craft shop. Video edited with Premiere Elements 2018 Music by Epidemic Sound (http://www.epidemicsound.com)

 

Woodturning - difficult and odd shape wood into lidded pot!
By: CraftWithAfshin
March 16, 2019 · 2,468 views

Hi everyone today im going to be turning a triple crotch piece of English Walnut into a lidded pot and i will be using laburnum as the lid i will be showing all the steps in order to make one except the sanding part which i think is boring and unnecessary to show. I hope you like it and thanks for watching! My amazon Influencer US Link : https://www.amazon.com/shop/craftwithafshin My amazon Influencer UK Link : https://www.amazon.co.uk/shop/craftwithafshin ------------------------------------------------- (Tools and Products I used in this video) Record poer coronet Herald lathe: https://www.recordpower.co.uk/product/herald-heavy-duty-cast-iron-electronic-variable-speed-lathe#.XGmLq-j7RhE SC4 chuck: https://amzn.to/2TRopsv Yorkshire grit Microfine: https://amzn.to/2Gtkgb1

 

I made a Teeny Weeny pot with a lid and resin finial
By: Nick Zammeti
March 15, 2019 · 61,990 views

Thanks to Squarespace for sponsoring this video, use code NickZammeti for 10% off your first purchase. https://www.squarespace.com/NickZammeti I made a very Teeny Weeny pot from walnut wood. this is a very small pot with a lid and finial. #teeny #weeny Patreon ( Please consider supporting my channel) https://www.patreon.com/nickzammeti Nick Zammeti/ Instagram https://www.instagram.com/nickzammeti My Kit I use in my videos https://kit.com/nickzammeti Makers Central 2019 https://www.makerscentral.co.uk/HOME The Music I use in my video's http://share.epidemicsound.co

 

Wood Turning - Cracked Laburnum Wood Pot with a slotted Lid
By: caitlan the cat
March 03, 2019 · 2,974 views

I had a lovely piece of laburnum however there were quite a few cracks all the the way through so I was not sure how it would turn. I manged to turn the laburnum wood into this pot with a lid that slots into, when I have made pots before the lid has slotted around the pot. Once I turned the lid off I made a slot so that I could insert the lid back in the base and turn the outside of the pot and finish the lid off properly. Despite the cracks I managed to keep the wood together and it turned out really nice. If you would like to see more check out my Facebook Page - https://www.facebook.com/caitlanthecat/ #woodturning #laburnum #cracked #pot #woodworking #maker

 

Woodturning - Punky Wood Pot
By: Matt Jordan
March 01, 2019 · 32,154 views

Little piece of Spalted Punky Oak, turned on the lathe into a small pot. Finial is made from Snakewood. Definition of punky wood: rotten wood, especially wood permeated by the mycelium of pore fungi and frequently luminescent

 

#60 - Small Rock Maple Pot... With iron worm holes
By: Billy Burt
February 27, 2019 · 247 views

Decided to turn this little piece I got from a pallet just to see what I could come up with. It's about the right size for toothpicks, but could be used for any small items. In spite of the nail holes I think it turned out well enough. It has some nice chatoyance. First try at using Howard's Feed and Wax. I like it! Watch and see how I build it. Thanks for watching! And if you are bidding, thank you for that as well! Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com Nick Burt's channel: https://www.youtube.com/channel/UChOyZKSLirHfTC0-QZrXQ4Q Phil's channel (M

 

Turning A Chunky 20 Yew Log into A Pooh Honey Pot
By: Nick Zammeti
February 22, 2019 · 163,718 views

This is a 20 Yew Log that i turn into a snakepot. #yew #relaxingvideo #relax #winniethepooh #honeypot Patreon ( Please consider supporting my channel) https://www.patreon.com/nickzammeti Nick Zammeti/ Instagram https://www.instagram.com/nickzammeti My Kit I use in my videos https://kit.com/nickzammeti Makers Central 2019 https://www.makerscentral.co.uk/HOME The Music I use in my video's http://share.epidemicsound.com/qdj62 Nick Zammeti Personal Instagram https://www.instagram.com/zammeti My Website http://www.nickzammeti.co.uk Charlie The Maker (My Son's C

 

Woodturning at 54a #147 A little olive pot
By: Keith Barrow
February 11, 2019 · 2,021 views

3 bits of olive make up this little pot,about 5.5 inches tall.

 

Salt & Pepper Pot
By: The Flaming Turner
February 08, 2019 · 70 views

Got myself a salt and pepper kit so here's what i did with them not sure what type of wood it is but gotta say looks nice ----------- Website https://theflamingturner.my-free.website/ ----------- Facebook Group https://www.facebook.com/groups/257690594764605/ ----------- 'Royalty Free Music from Bensound'

 

Woodturning - Laburnum Pot with Copper Wire
By: William Hunt
February 08, 2019 · 2,992 views

Woodturning a Laburnum pot on a lathe. My first attempt a a detailed “how to” video. I saw a creation by Les Symonds RPT on the cover of the last Winter Issue of Woodturning magazine which inspired this project. I attempted a more rustic version using and old, cracked, dusty and wormy piece of Laburnum that was held together by some copper wire. I added some patina which I dont like, I think I'll have another go at that. William Hunt woodturner. I use my improvised woodturning beading tool as described by Mike Waldt in a YouTube video Les Symonds RPT http://www.facebook.com/pren.bala Mike Waldt’s video on improvised beading tool: https://youtu.be/eZ03n8vt2kw #WilliamHunt #WilliamHuntWoodturner #LatheCraft #WilliamHuntWoodturning #LaburnumPot #WoodturningLaburnum

 

Turning a Cedar Wood Pot
By: Scenic City Woodturning
February 08, 2019 · 45 views

This was originally going to be a bowl made out of cedar from my Dad's yard, but it turned out to be a pot instead. Oh well, I think it looks pretty good as a pot. Maybe it identifies as a bowl? Music: www.hooksound.com Disclaimer I am not a professional woodworker or woodturner and working with machinery can be dangerous. My videos are for entertainment purposes only and you should not rely on my methods. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you. Your safety is your own responsibility not mine Be safe, creative and have fun!

 

White Oak Jar with Lid
By: Turntastic Wood Designs
February 04, 2019 · 152 views

A rather imperfect turned jar from a old white oak beam

 

Yew Matchstick Pot
By: The Flaming Turner
February 01, 2019 · 80 views

Here's my Laylandii (Conifer) pot with coloured matchsticks sanded, sealed and finished. Big thanks to these below for inspiring me to take up this hobby so go check them out if you haven't already. (Titled has been changed due to being pointed out that it wasn't Yew sorry for the mistake) Mike Waldt -https://www.youtube.com/channel/UCI_tt3HOlpZguB8ebtB4k1w Nick Zammeti - https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA M. Saban Smith - https://www.youtube.com/channel/UCpHZv5j6vdMmFjXHDBxPLxw R Humphery - https://www.youtube.com/channel/UC-8QCVf10-suYAeutMRqAsw Makes & Takes - https://www.youtube.com/channel/UCB6JCkYWNBBwB4TT2sl6RrQ - Website - https://theflamingturner.my-free.website/ Facebook group - https://www.facebook.com/groups/257690594764605/?ref bookmarks 'Royalty Free Music from Bensound'

 

Mystery Wood Lidded Pot
By: Jason Rodocker
December 17, 2018 · 24 views

I finally got to try again at making the cotton swab box for my mom. I found this piece of wood in the scrap bin at my local wood working store.

 

Woodturning - Hidden compartment inside a lidded pot... possible?
By: CraftWithAfshin
November 16, 2018 · 5,783 views

Hi everyone today im turning something I've been asked alot by a good friend who watches me (you know who you are you coffee addict :P) but it turned out to be most difficult lidded box I've turned in terms of accurecy of fitting and amount of work it toke to finish all the pieces so I hope you like what I made and I look forward to see if you guys like it or not! My amazon Influencer Link: https://www.amazon.com/shop/craftwithafshin My email: Craftwithafshin@yahoo.com My eBay shop: https://www.ebay.co.uk/usr/craftwithafshin My Patreon: https://www.patreon.com/CraftWithAfshin

 

Turning an Apohecary Jar from Scrap Plywood
By: Peaceful Woodturner
September 14, 2018 · 168 views

Is it a Cookie Jar or an Apothecary Jar? Either way it was a cool use of some crap plywood! Thank you for joining me on The Peaceful Woodturner. All my videos are me sharing my journey as I learn this art form. I am a student, not a teacher and in no way an expert. Please take time to read, learn, and study so you can be safe! Use and wear all appropriate safety equipment including head protection, face shield, and respiratory protection. Thank you for joining me on this journey! Facebook: https://www.facebook.com/PeacefulWoodturner/ Twitter: @WoodturnerPeace

 

Woodturning - The Banksia Nut Lidded Pot
By: Twisted Crafts UK
August 06, 2018 · 1,092 views

In this video I turn a banksia nut/pod into a lidded pot/box with a bocote finial Don't forget to hit that SUBSCRIBE button to follow me on my woodturning journey. Find me on Facebook @twistedcraftsuk or use the link below. https://www.facebook.com/twistedcraftsuk/ Here are some links for some of the items i used in this video. Yorkshire Grit - http://yorkshire-grit.com/ The Carbide Cutting Tools I Use - www.ukwoodcraftandcarbidechisels.co.uk Thanks for watching! And a BIG thank you to my subscribers!

 

making a tea caddy/pot out of wood and milliput for tea.
By: Nick Zammeti
July 20, 2018 · 36,663 views

Nick Zammeti/ Instagram https://www.instagram.com/nickzammeti Nick Zammeti Personal Instagram https://www.instagram.com/zammeti Milliput https://www.milliput.com/ My Website http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.recordpower.co.uk/ ………………………………………………………………………………………………………………………………………………………. PLEASE NOTE: IF YOU ARE SENDING

 

Woodturning - Massive Apple wood burl lidded pot! Part 2
By: CraftWithAfshin
July 08, 2018 · 2,547 views

Thank you all for watching!

 

Woodturning - Massive Apple wood burl lidded pot! Part 1
By: CraftWithAfshin
July 07, 2018 · 2,465 views

Richard UK wood supplier: https://www.facebook.com/aworldofwood

 

Woodturning - Ash Burl Pot
By: Blind Woodturner
July 01, 2018 · 641 views

Turning an ash burl pot from a piece of Ash gifted by David Duly and originating from Denmark. *** Proudly sponsored by Axminster Tools & Machinery. Axminster Tools & Machinery offer an extensive range of quality, value for money tools and machinery. https://www.axminster.co.uk/ *** Join me, Chris Fisher, the Blind Wood Turner, in my workshop. I started out in life as a regular guy, working in auto body repair at BMW, until one day, completely out of the blue, a rare virus (Toxoplasmosis) reared its ugly head and caused me to lose my sight in a matter of weeks. Despite the challenges o

 

Sycamore Coloured Pot
By: BowersCraft Woodturning
May 15, 2018 · 79 views

Hi this pot is made from sycamore is about 4 inches high 3 inch diameter. Basic acrylic artist paints watered down Liberon Gilt Cream Lidl rattle can lacquer Apologies as I managed to lose the middle section of the video Also the sound low at the start and music is louder Enjoy https://www.bensound.com https://www.youtube.com/channel/UCImOAiKvAcBdt8O02CdIpXg https://www.youtube.com/channel/UCy2WZ1h9A_qKMR_zVXSeTug https://www.youtube.com/channel/UChd8tg-PwwvUj7vll4C9yKQ https://www.youtube.com/channel/UCF0zB_FmO7xkumjrFMHPb4A

 

A Small Beech Pot Hand Turned
By: Wayne the Woodturner
April 29, 2018 · 338 views

A small beech pot hand turned and finished with metal reactive paints

 

Woodturning an Olive Wood Pot
By: Woodturning Arts
March 14, 2018 · 1,878 views

Thought I'd change things up a bit and turn an Olive Wood Pot. Like/Share/Comment/Subscribe and Thanks for Watching! Olive Pot Audio Information Track #1 Cool Rock - Take the Lead by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100279 Artist: http://incompetech.com/ Track #2 Shoelace by Quincas Moreira Track #3 She's Gone by The 126ers

 

The Plant Pot that Wanted to be a Bowl
By: CL Woodturning
March 11, 2018 · 126 views

Mother’s Day gift of a nice snack bowl....supposed to be a plant pot haha

 

squash pot build
By: earl's small segment shop
February 20, 2018 · 2,745 views

squash pot turning with indian blanket feature ring

 

The Hybrid Barrel Pot - Milliput, Eucalyptus and clear resin
By: Jim Overton - Jimson's Stuff
February 18, 2018 · 22,768 views

In this video I make a barrel shaped pot, using a blank I made from eucalyptus, Milliput and clear resin. Makers Central, 5th and 6th May 2018 NEC Birmingham UK www.makerscentral.co.uk www.milliput.com available from Stiles and Bates http://www.stilesandbates.co.uk Clear Top 5 epoxy resin from MBFG http://www.mbfg.co.uk http://www.mbfg.co.uk/epoxy-resins/polycraft-cleartop-5-bar-counter-table-top.html Chestnut Products https://chestnutproducts.co.uk Hope Pro hollowing tool https://hopewoodturning.co.uk/tools-handles/hope-carbide-cutting-tools/13/hope-6-mm-pro-carbide-tool?c 5 Makers Cent

 

woodturning- lego and epoxy resin - making a lego pot
By: Nick Zammeti
February 16, 2018 · 1,351,301 views

FOLLOW ME ON INSTAGRAM https://www.instagram.com/nickzammeti/?hl en MY WEBSITE http://www.nzwoodturning.co.uk/ MAKERS CENTRAL WEBSITE https://goo.gl/x3yVjm MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.re

 

Wood Turning Club - Made a little pot
By: caitlan the cat
January 20, 2018 · 258 views

Made a little pot at wood tuning club - think it looks a little like a Milk Urn. Hope you like my video and please give me ideas of what to try next.

 

I make a nice little pot after a big mistake
By: Timber Worker
January 16, 2018 · 38 views

So I accidentally cut a hole in the side of a little pot I was turning. Rather than throw it away I decided to see if I could save it with some resin. I made many more mistakes as I carried on, don't feel you need to point them all out though, but I'm happy with then end result. Thanks for watching. If you like my channel, I'd really appreciate you sharing it with your friends, or subscribing for future uploads. Music from https://www.bensound.com

 

Copper and Black Pot
By: John Clothier
January 13, 2018 · 3,367 views

In this project video I show you how I made this small artistic pot from the wood sycamore. It is coloured black and then copper leafed. I then texture the copper leaf to give an interesting rustic look before adding a splash of colour. MY WEBSITE https://www.johnclothier.co.uk FOLLOW ME ON FACEBOOK https://www.facebook.com/JohnClothierUK/ FOLLOW ME ON INSTAGRAM https://www.instagram.com/JohnClothierUK/ FOLLOW ME ON PINTEREST http://pinterest.com/JohnClothierUK --------------------------------------------------------------------------------- MY EQUIPMENT --------------------------------

 

MAKING MY FIRST EVER POT!
By: Nick Zammeti
December 29, 2017 · 161,756 views

I mixed lots of wood together here to make a blank on wood and then turned it on the lathe to make this woodturning pot. MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ GLACIAL ART ICE SCULPTORS https://www.glacialart.com/ IJESSUP https://www.youtube.com/watch?v 2Q1A32tSeXI MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE

 

Copper Inlay Pot and More Skew Practice
By: Tony Walters
December 13, 2017 · 23 views

In this video I use copper powder and a 2 part epoxy resin as an inlay into an alder wood pot and gain more experience using a skew chisel

 

Heath Knuckles inspired hybrid epoxy and burl pot
By: Asgard Woodturning
November 26, 2017 · 2,337 views

Pot turned from a hybrid Epoxy and Burl blank inspired by Heath Knuckles, Burl is a Mallee Burl

 

Pot for my Razor
By: CL Woodturning
November 12, 2017 · 16 views

 

woodturning # 93 lidded locust pot
By: Woodslee Summercraft
November 11, 2017 · 2,720 views

Honey locust is beautifully figured and coloured wood, I rough turned this spindle log about a year ago, here i turned a 3 1/2' diameter by 4' high lidded pot finished with Yorkshire grit, hampshire sheen high gloss, carnacrystalline wax stick and microcystalline wax stick to produce a brilliant shine I still have the other half of the blank to make something from. for all of these finishing products in Canada please visit my website here http://www.woodsleesummercraft.ca/ I used my new Robert Sorby texturing tool for the first time, visit Jeff Hornung for more information on how to gain the maximum effect from this tool in his new DVD coming out soon, at his website here http://www.thewalnutlog.com/ and my website soon.

 

THE GOLD LEAF BOWL/POT!
By: Nick Zammeti
October 27, 2017 · 997,436 views

here im woodturning a bowl and using gold leaf with epoxy resin. MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en JOE PIERCE MAKER https://www.youtube.com/channel/UCRLciNfJc8TWYub4gj7erqA STEWART FURNI WOODTURNING https://www.youtube.com/user/stewartfurini MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.c

 

Tokar Art - Woodturning 86 Olive Beauty
By: Dipa Das
September 26, 2017 · 23,704 views

 

#85 Pot Pourri Pot Autumn / Fall Coloured Woodturning Project
By: M. Saban Smith Woodturning
September 24, 2017 · 9,944 views

Finally got back on the lathe to turn a project over a couple of days. For this episode, I was thinking about the change of season into Autumn / Fall with a neat little pot pourri pot out of spalted beech which makes a great woodturning project for beginning turning. It was coloured with Intrinsic Colour Dyes and finished with Hampshire Sheen. I also used a UV filtered danish oil and a few coats of my cellulose sanding sealer. To turn it, I used a 3/8' spindle gouge and a 1/2' bowl gouge, both from the Excelsior range from Robert Sorby. Overall, the finished item is a nice piece and will

 

Teak pot part two
By: Blind Woodturner
September 12, 2017 · 292 views

 

MAKING A POT FROM LEFTOVER WOOD SHAVINGS!
By: Nick Zammeti
September 08, 2017 · 310,357 views

MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw MY NZ WOODTURNING EMBLEMS (round brass logo makers mark) http://www.williams-eng.co.uk/ THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MUSIC CREDIT http://www.epidemics

 

THE LOLLYPOP STICK POT!
By: Nick Zammeti
July 14, 2017 · 341,123 views

MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ ATOMIC SHRIMP (LOLLYPOP BLANK) https://www.youtube.com/user/AtomicShrimp CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw MY NZ WOODTURNING EMBLEMS (round brass logo makers mark) http://www.williams-eng.co.uk/ THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATH

 

Epoxy Pencil Pot
By: Asgard Woodturning
July 05, 2017 · 400 views

In this video i make a epoxy pencil pot turned on the Lathe

 

THE DANDILION SEA POT!
By: Nick Zammeti
June 23, 2017 · 693,824 views

MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw MY NZ WOODTURNING EMBLEMS (round brass logo makers mark) http://www.williams-eng.co.uk/ THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.recordpower.co.uk/

 

Apothecary jar full by Al Furtado
By: Al Furtado Rebel Turner
June 05, 2017 · 1,598 views

I joined both videos Part 1 and 2 for those of you that have an hour to spend watching the steps I took and the instructions on how to build this piece or incorporate the methods used to your own pieces

 

Wood turning Apothecary jar part 2 by Al Furtado
By: Al Furtado Rebel Turner
June 04, 2017 · 4,410 views

Apothecary jar part 2. This has probably been the most labor intensive piece I have ever done on the lathe and still keep it to a minimal amount of segments.. I hope you like it. 6' x 13' tall https://www.facebook.com/TheRebelTurner

 

Wood turning Apothecary jar part 1 by Al Furtado
By: Al Furtado Rebel Turner
June 04, 2017 · 5,210 views

Apothecary jar part 1. This has probably been the most labor intensive piece I have ever done on the lathe and still keep it to a minimal amount of segments.. I hope you like it. 6' x 13' tall https://www.facebook.com/TheRebelTurner

 

Lets turn a lidded pot some texturing with Henry Taylor decorative elf
By: CraftWithAfshin
May 25, 2017 · 5,958 views

I have setup a patreon account for those that wish to directly support me it is obviously not necessary since every project will also be uploaded here for free :) https://www.patreon.com/TurnWithAfshin Music: Inspired Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0/ Angel Share Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0/ Fresh Air Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

Woodturning a Yew emerging pot with Purple Heart finial
By: Turning Works
April 22, 2017 · 662 views

This a small gift, made as a thank you to Michael and Christine Hestletine. They not only bid on and bought my Bookworm character I made for the 'Make it Matter' campaign, but gave me LOADS of other stuff! Thank you guys - you're both AWESOME! Take care, Dave

 

Sycamore Pyro Pot
By: Olivers Woodturning
April 16, 2017 · 210 views

Sycamore pierced pyro pot 200mm (8') tall x 250mm (10')

 

28 - Natural Edge Lidded Pot from Carob Wood
By: Bill Rockwood
March 19, 2017 · 4,283 views

In this video I turn a natural edge lidded pot (or box) from Carob, for the Challenge and Trade hosted at Woodturner's Resources (http://www.woodturnersresource.com/). I also use a new chuck - the PSI 6-jaw Barracuda.

 

THE BATMAN LEGO MOVIE BATTLE POT!
By: Nick Zammeti
March 17, 2017 · 168,545 views

MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ ………………………………………………………………………………………………………………………………………………………. PLEASE NOTE: IF YOU ARE SENDING ME A GIFT, PLEASE COULD YOU PLACE A LOW VALUE ON THE PACKAGE YOU ARE SENDING. THANK YOU. ………………………………………………………………………………………………………………………………………………………. SEND ME STUFF FAO NICK NZ WOODTURNING PO Box 363 ROMSEY SO51 1DY UNITED KINGDOM ……………………………………

 

LARGE DETAILED PENCIL POT!
By: Nick Zammeti
March 10, 2017 · 44,052 views

MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ MUSIC BY Music by: David Cutter Music - www.davidcuttermusic.co.uk MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ ………………………………………………………………………………………………………………………………………………………. PLEASE NOTE: IF YOU ARE SENDING ME A GIFT, PLEASE COULD YOU PLACE A LOW VALUE ON THE PACKAGE YOU ARE SENDING. THANK YOU. ………………………………………………………………………………………………………………………………………………………. SEND ME STUFF FAO NICK NZ

 

THE GIDGEE POT!
By: Nick Zammeti
March 03, 2017 · 22,220 views

KEEP CALM AND WAFFLE ON! Alans Channel https://www.youtube.com/channel/UCA2q7lWw8B4o_Bz4-ozw0ZA Music By https://soundcloud.com/fredjimusic The resin I use is from here AKTINIUM TECHNOLOGIES LTD http://www.resin4art.com/ MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ ………………………………………………………………………………………………………………………………………………………. PLEASE NOTE: IF YOU ARE SENDING ME A GIFT, PLEASE COULD YOU PLACE A LOW VALUE ON THE PACKAGE YOU ARE SENDING. THANK YOU. ………………………………………………………………………………………………………………………………………………………. SEND ME

 

THE PEG POT!
By: Nick Zammeti
February 24, 2017 · 205,089 views

I make a pot from Pegs in this video. Hope you enjoy! Music by Music by: David Cutter Music - www.davidcuttermusic.co.uk MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ ………………………………………………………………………………………………………………………………………………………. PLEASE NOTE: IF YOU ARE SENDING ME A GIFT, PLEASE COULD YOU PLACE A LOW VALUE ON THE PACKAGE YOU ARE SENDING. THANK YOU. ………………………………………………………………………………………………………………………………………………………. SEND ME STUFF FAO NICK NZ WOODTURNING PO Box 363 ROMSEY SO51 1DY UNITED KINGDOM …………………………………………………………………………

 

Spalted Beech Pen Pot - Episode 58
By: Paul Lockwood
February 15, 2017 · 573 views

A very quick project as I needed another pet pot for my desk at work. So I grabbed a piece of the spalted beech, rounded it off, drilled out the majority. The whole piece was sanded down to 600, two coats of sanding sealer, Yorkshire Grit and finished off with two coats of Woodwax 22. Music The Handymans Lamant By Josh Woodward http://freemusicarchive.org/music/Jos... From The Free Music Archive http://freemusicarchive.org CC Attribution 4.0 International https://creativecommons.org/licenses/... Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Wood Turning a Seedling/Herb Pot With a Natural Edge
By: Jerry Paul
February 14, 2017 · 9,418 views

I cut a partly green mountain ash log into a couple of blanks out in the garage and brought them into the house. The change of temperature caused it to immediately start checking so I decided to chuck one up right away. As I was cutting the shape, I thought it would be a good piece to use as a pot for seedlings or herbs.

 

FACE OFF! LEGO POT!
By: Nick Zammeti
February 08, 2017 · 96,632 views

MADE A SMALL LEGO POT WITH LEFT OVER RESIN. I ACCIDENTALLY TOOK HIS FACE OFF. MUSIC BY Music by: David Cutter Music - www.davidcuttermusic.co.uk MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ ………………………………………………………………………………………………………………………………………………………. PLEASE NOTE: IF YOU ARE SENDING ME A GIFT, PLEASE COULD YOU PLACE A LOW VALUE ON THE PACKAGE YOU ARE SENDING. THANK YOU. ………………………………………………………………………………………………………………………………………………………. SEND ME STUFF FAO NICK NZ WOODTURNING PO Box 363 ROMSEY SO51 1DY UNITED KINGDOM ……………

 

WOODTURNING - Spalted Ash pot FAIL!?!?
By: Turning Works
February 06, 2017 · 2,045 views

I've been ill recently, but just HAD to get a project out! All week I've been off work and lying in bed feeling REALLY poorly, but I am almost at 500 subscribers and this gave me the will power to create something this weekend! This is a spalted Ash lidded pot, with a ball knob made from Purple Heart - a beautiful wood that I only use on special occasions! Unfortunately my mind wasn't 100% and I made some schoolboy errors and did somethings back to front! On this project I used; Yorkshire Grit; http://yorkshire-grit.com Hampshire Sheen (Original); http://www.hampshiresheen.com Please also support the Make it Matter auction; http://makersmakeitmatter.com https://www.facebook.com/makersmakeit... THANK YOU FOR WATCHING! Take care, Dave

 

PEN BLANKS TURNED INTO A POT!
By: Nick Zammeti
January 27, 2017 · 55,057 views

Here is the pen blank pot i made from lots of pen blanks. Music By https://soundcloud.com/nowemusic/tracks MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ ………………………………………………………………………………………………………………………………………………………. PLEASE NOTE: IF YOU ARE SENDING ME A GIFT, PLEASE COULD YOU PLACE A LOW VALUE ON THE PACKAGE YOU ARE SENDING. THANK YOU. ………………………………………………………………………………………………………………………………………………………. SEND ME STUFF FAO NICK NZ WOODTURNING PO Box 363 ROMSEY SO51 1DY UNITED KINGDOM ………………………………………………………………………………………………………………

 

MAKING A PENCIL BLANK AND POT!
By: Nick Zammeti
January 25, 2017 · 40,079 views

Here's a little Pencil Pot I made. first I made 2 blanks and here I turn one of them. SHITHOT WAXSTIK http://www.toolpost.co.uk/pages/Finishes/Shellawax/shellawax.html Music by: David Cutter Music - www.davidcuttermusic.co.uk MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ ………………………………………………………………………………………………………………………………………………………. PLEASE NOTE: IF YOU ARE SENDING ME A GIFT, PLEASE COULD YOU PLACE A LOW VALUE ON THE PACKAGE YOU ARE SENDING. THANK YOU. ………………………………………………………………………………………………………………………………………………………. SEN

 

С Новым годом!!! (Happy New year!!!)
By: Аleksey Bek
January 03, 2017 · 768 views

В этом видео делаю заготовку из разных пород дерева для будущей поделки. In this video making a blank of wood for future DIY.

 

Turning an End Grain, Honey Locust Pot with Sam Angelo
By: WYOMINGWOODTURNER
December 30, 2016 · 30,706 views

Sam turns an end-grain, Honey Locust pot from wet wood. This vessel was turned thin and left to dry and warp. In a previous video, ---- https://www.youtube.com/watch?v ma2dv2mebT4 ---- he turned a similar vessel in a cross grain orientation. Later he will compare the two pieces as they warp and move.

 

WOODTURNING TWO PEN BLANK POTS!
By: Nick Zammeti
December 28, 2016 · 13,534 views

In this video i make two pots out of some pen blanks. I really enjoyed this woodturning project and i hope you do too. Music by https://soundcloud.com/danijel-zambo https://danijel-zambo.bandcamp.com/ MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ SEND ME STUFF FAO NICK NZ WOODTURNING PO Box 363 ROMSEY SO51 1DY UNITED KINGDOM SUBSCRIBE TO ME ON YOUTUBE HERE https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA FOLLOW ME ON TWITTER https://twitter.com/NZWoodturning PLEASE LIKE MY FACEBOOK PAGE https://www.facebook.com/nzwoodturning/ INSTERGRAM https://www.instagram.com/nickzammeti/?hl en MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ YORKSHIRE GRIT http://yorkshire-grit.com/ CHECK OUT MY VLOGGING CHANNEL. https://www.youtube.com/channel/UCAQsI9pUgViHsOOya-J3sTQ CHECK OUT MY GIVEAWAY CHANNEL https://www.youtube.com/channel/UCb4AtBzCeVzGEEbM_4394dA

 

BLACK WHITE & ORANGE RESIN POT!
By: Nick Zammeti
December 23, 2016 · 43,643 views

MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ SEND ME STUFF FAO NICK NZ WOODTURNING PO Box 363 ROMSEY SO51 1DY UNITED KINGDOM SUBSCRIBE TO ME ON YOUTUBE HERE https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA FOLLOW ME ON TWITTER https://twitter.com/NZWoodturning PLEASE LIKE MY FACEBOOK PAGE https://www.facebook.com/nzwoodturning/ INSTERGRAM https://www.instagram.com/nickzammeti/?hl en MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ YORKSHIRE GRIT http://yorkshire-grit.com/ CHECK OUT MY VLOGGING CHANNEL. https://www.youtube.com/channel/UCAQsI9pUgViHsOOya-J3sTQ CHECK OUT MY GIVEAWAY CHANNEL https://www.youtube.com/channel/UCb4AtBzCeVzGEEbM_4394dA

 

Turning A cross-grain Pot with Sam Angelo
By: WYOMINGWOODTURNER
December 18, 2016 · 12,893 views

Sam turns a cross-grain Honey Locust pot from wet wood. This vessel was turned thin and left to dry and warp. In an upcoming video, he will turn a similar 'pot' in an end grain orientation. Later he will compare the two as they warp and move. Link to End-grain pot video: https://www.youtube.com/watch?v ihFvqgcAHxU

 

Potes com tampa.
By: Joabe Bomfim
October 14, 2016 · 2,288 views

 

making a dried herb storage pot and spoon
By: Bram the Wadesmill woodturner
September 07, 2016 · 808 views

Made from a part turned apple wood bowl and the spoon is Carl Jacobson inspired .

 

Woodturning A Natural edge Banksia pod pencil pot (Canadian addition)
By: Templeboy Turnings
August 23, 2016 · 2,509 views

After a small break from woodturning videos I return with this short time lapse video of turning a some might say 'Feared' Banksia pod into a Natural edge pencil pot. I'm currently on vaction in Canada and turned, filmed and edited this video at my buddies house !! Intro Music By :- Paul Mooney .... :- Bullet from a gun https://www.facebook.com/profile.php?id 100007379238948&fref ts Available to purchase Here :- http://templeboyturnings.com/product/templeboy-turnings-youtube-intro-music/ Music Track 1 by Behind The Vines :- Love Forever https://www.youtube.com/watch?v tfoegDzyB2Y Music Trac

 

#69 Hollow Form Pot Woodturning Fail
By: M. Saban Smith Woodturning
August 21, 2016 · 4,688 views

Not my greatest turning it has to be said, but there is a rescue plan! This artistic woodturning hollow form pot was turned using a Robert Sorby Ultima Hollow Tool, a bowl gouge, spindle gouge and parting tools. All was going well until so close to the end when I was painting the piece with Modern Masters Metal Reactive Paints...and then disaster struck... See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. Ther

 

Exotic Wood Pot
By: Nick Zammeti
August 11, 2016 · 3,658 views

using some scrap pieces of wood I made this pot. this was part of a vase I made last year but I decided not to use it. its been sat in the shed for ages, so thought I would make something from it. you can visit my website here www.nzwoodturning.co.uk I sell most of my products and they are mostly listed on my website. Bespoke orders are welcome. please email me on nzwoodturning@gmail.com Please like and Subscribe to see more videos

 

#117 Woodturning Pen Pots with Yorkshire Grit Review
By: Stephen Ogle
June 28, 2016 · 17,737 views

After trying the 'Yorkshire Grit' woodturner's abrasive paste, I just had to give a review on this product. I was very impressed with the results of this product. Click the links below for more information and ordering. For ordering from the UK please use this link: http://www.yorkshire-grit.com/ For ordering from the USA use this link: http://www.thewalnutlog.com

 

Woodturning at 54a. #83. A Rustic Garlic Pot
By: Keith Barrow
June 22, 2016 · 3,934 views

I'd never heard of a garlic pot before,but was asked to make one,so here goes! Made from Lime,it's really just a box with holes in!!

 

Woodturning at 54a. #80. 'A Pork Pie Pot'
By: Keith Barrow
June 11, 2016 · 5,556 views

Here's a little pot made out of slightly spalted birch.I had no idea that I was going to make something that looked like a pork pie when I started this video,hence no mention of it!! Funny how things turn out.

 

E44 Two Pots Two Demos No Time
By: M. Saban Smith Woodturning
June 10, 2016 · 3,635 views

Another week has whizzed by with no videos. I did however have time to turn a couple of hollow pots with the new hollowing tool. Also, I have a couple of demos to do at UKIWS next week...I've the hour long one sorted, but the other is up to two hours, and I'm a bit stuck on what to do. If you have an idea, please let me know in the comments. Also, many thanks for your comments and message or condolence last week, and also for my birthday wishes. These last three weeks have been a real roller coaster. Still, nearly done now. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list! Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com Something else of interest: Read my FREE newspaper at http://www.turnersrest.com The UK & Ireland Woodturning Symposium: http://www.ukiws.co.uk

 

Scrap Wood Pot with Ebony Top
By: Nick Zammeti
May 01, 2016 · 6,710 views

So, here I made a small box/pot form scraps bits of wood in the shed. I wanted to mix this one up with a few different layers of wood. Had a few set back on this but got there in the end. Enjoy. Music provided by http://www.bensound.com

 

The Square Resin Pot
By: Nick Zammeti
April 18, 2016 · 5,605 views

When I was experimenting with resin I made this pot, it’s a plastic beer glass filled with chopped up olive wood. It’s been in the shed a while now so I thought I would finish it on the lathe. Hope you like it... Please dont forget to like and subscribe & Thanks for Watching. All the best

 

The Pot The Wife Made
By: Nick Zammeti
April 03, 2016 · 8,934 views

Ok, so the Wife decided that she wanted to give turning a go today and she made this little pot from Chestnut Wood. With a little help from me but to be fair not much. She did very well and loved it. Take a look!

 

Pot Belly Vase Part 2
By: Al Furtado Rebel Turner
March 22, 2016 · 6,159 views

Pot Belly Vase Part 2 I was debating on 2 parts of 21 minutes each .a time lapse that I removed and relisted or one 42 min video please comment on what you prefer. I added some rings on the neck detail after I was editing this video. Did you spot it? As we know some pieces can take over 2 hours to complete and I know you don't want me to upload a 2 hour video LOL Thanks I appreciate your feedback.

 

Pot Belly Vase Part 1 Wood turning by Al Furtado
By: Al Furtado Rebel Turner
March 21, 2016 · 2,213 views

Pot Belly Vase Part 1 I was debating on 2 parts of 21 minutes each .a time lapse that I removed or one 42 min video please comment on what you prefer. I put up the time lapse again for experiment. As we know some pieces can take over 2 hours to complete and I know you don't want me to upload a 2 hour video LOL Thanks I appreciate your feedback.

 

The Stabilized Wood Pot
By: Nick Zammeti
February 27, 2016 · 26,136 views

Here I made a little pot from a piece of stabilized wood I purchased from the Exotic Hard Woods . The link is here if you want to buy one. http://www.exotichardwoodsukltd.com/page72/rapidcart-55/ There is some fantastic woods sold here, including these stabilized pieces. Enjoy!

 

Pooh Honey Pot Turning Challenge
By: Jake Webb
February 23, 2016 · 8,265 views

A challenge set by Andrew, one of my subscribers inspired by the honey dipper video, to make a Pooh Honey Pot. My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

The Pencil Pot
By: Nick Zammeti
January 18, 2016 · 25,039 views

Here the little pencil pot I made. hope you like it.

 

A Little Lidded Pot for my Mum
By: Nick Zammeti
January 03, 2016 · 11,097 views

Hi All, this video is just to get my channel going, its short and I have overlaid my voice on this . The pot is made from a Spalted Beech wood. Hope you like it. Please subscribe to see some interesting pieces soon.

 

Woodturning - A carved pot - part two
By: Andrea Zanini
December 29, 2015 · 2,122 views

This is the second part of the last video. It shows the carving process of the turned small ash vessel. Hope you like it! You can follow me on: Facebook https://www.facebook.com/zaniniwoodcarving/?ref hl Instagram https://www.instagram.com/andreazanini464/ Music by Mark Knopfler & Emmylou Harris 'Right now'

 

Woodturning - A carved pot - part one
By: Andrea Zanini
December 28, 2015 · 1,903 views

It's been a busy period and I have had limited access to my main shop. So I decided to use my mini lathe to turn something other than just pens. This is the first part of a small carved vessel. In this video is shown the turning process. Thank you! You can follow me on Facebook https://www.facebook.com/zaniniwoodcarving/?ref hl Instagram https://www.instagram.com/andreazanini464/ The song in the video is ''looking for the summer'' by Chris Rea

 

Pen Pot from African Blackwood
By: Jake Webb
December 18, 2015 · 2,504 views

A great Christmas present for the business exec or artist, or anyone who still likes pens and brushes. Blackwood is great for this as it is the densest wood in the world and finishes really well. The Blank is unusual in shape as it is designed as a blank for clarinet bells. My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

Wood Turning #112 A Fig Pot
By: The Tiny Trailer Workshop
July 31, 2015 · 6,174 views

Bryan Gidney at Summer’s Woodworking https://www.youtube.com/user/summerswoodworking Karol Kolanowski https://www.youtube.com/user/polishedwoodworking So we got the important people up front there and now we can deal with the fact that this isn’t where I live! I like to have a nice looking yard... this is Beacon Hill Park In Victoria and they take gardening to a whole ‘nother level! We moved to Victoria in 1966 and Beacon Hill was one of the first places that I remember seeing! It is a park where everything changes all the time... but it has looked pretty much the same for all this time! Th

 

Wood Turning #112 Texted a Fig Pot
By: The Tiny Trailer Workshop
July 31, 2015 · 2,991 views

Bryan Gidney at Summer’s Woodworking https://www.youtube.com/user/summerswoodworking Karol Kolanowski https://www.youtube.com/user/polishedwoodworking So we got the important people up front there and now we can deal with the fact that this isn’t where I live! I like to have a nice looking yard... this is Beacon Hill Park In Victoria and they take gardening to a whole ‘nother level! We moved to Victoria in 1966 and Beacon Hill was one of the first places that I remember seeing! It is a park where everything changes all the time... but it has looked pretty much the same for all this time! Th

 

Wood Turning A Romanesque Pen Pot
By: M. Saban Smith Woodturning
May 01, 2015 · 2,266 views

In a much less complicated turning than last week's spinning top and table, I turn a pen pot that turns out more Romanesque than your usual pen pot. See Below for useful links to stuff used in this project. At http://www.msabansmith.com, you can read more about this project, see images, and possibly download one of the projects .pdf worksheets or full length, advert free videos. There is also a free mailing list! Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com Something else of interest: Read my FREE newspaper at http://www.turnersrest.com The UK & Ireland Woodt

 

Alabaster pot turned on the lathe
By: Carl Jacobson
January 16, 2015 · 15,792 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg I turned this Alabaster pot, and finished it off with a Ironwood finial. Thank you for supporting my channel Schedule one-on-one online classes jacobson68@yahoo.com Thank you for supporting free woodworking videos https://www.paypal.com/cgi-bin/webscr?cmd _s-xclick&hosted_button_id 7MQRX83KCLJBA ChefwareKits https://www.chefwarekits.com/?tracking carl Easy Wood Tools http://www.easywoodtools.com/ Website http://www.thewoodshop.tv/ Google https://plus.google.com/1

 

The Segmented Flower Pot Part 3 - Conclusion
By: Ron Calverley
April 14, 2014 · 16,121 views

Making a segmented flower pot from Aspen, Mahogany & Purple-heart wood.

 

The Segmented Flower Pot Part 2
By: Ron Calverley
April 05, 2014 · 33,317 views

Making a segmented flower pot from Aspen, Mahogany & Purple-heart wood.

 

The Segmented Flower Pot Part 1
By: Ron Calverley
March 29, 2014 · 9,011 views

Making a segmented flower pot from Aspen, Mahogany & Purple-heart wood.

 

woodturning a pen pot
By: Robbiethewoodturner
September 19, 2013 · 12,935 views

hi all here is a video i made some time back and it was up here before. i haven't being well enough to make any woodturning videos as me hands are giving me trouble i like to thank everyone for subscribing and all the support take care Robbie This video was produced and made by Robbie power Copyright All Rights Reserved

 

Woodturning A Pot O Gold Bowl For Leprechaun Gold
By: As Wood Turns
March 16, 2013 · 2,775 views

http://www.AsWoodTurns.com For St. Patrick's Day, I need a pot for the leprechauns to leave me a little of their gold. Fortunately, at a recent club meeting, Nick Stagg demo his bowl turning techniques. And even more, he gave me a big block of ash that he had used as a jam chuck. However, in my haste to leave town for a long trip, I neglected to protect the ash blank. While I was gone, it developed several large checks in the end grain. I thought I would just turn the bowl down by one half to one inch to get rid of the checks. Boy was I wrong, the checks went very deep. Now I have a small bowl

 

Wood Turning Pot Project
By: Ijinxx Wood
March 05, 2013 · 20,565 views

Turning in North Carolina - A lucky pot turning, from some chestnut oak

 

Turning a Newspaper Pot Maker, Part 1
By: gmertl
May 24, 2010 · 29,316 views

Intro, roughing down and marking out. Dimensional drawing of project is available free at http://www.austincreekwoodwks.com on the PLANS page. A neat little project any gardener will appreciate. Makes seed starting pots from newspaper.

 

Turning a Newspaper Pot Maker, Part 2
By: gmertl
May 24, 2010 · 12,721 views

Roughing to size, marking out and shaping the Top Portion of the Pot Maker.

 

Turning a Newspaper Pot Maker, Part 3
By: gmertl
May 24, 2010 · 18,742 views

Hollowing and parting off the Top Portion. Making the Base Unit and completing the project. Plus a short demo on how to make a planting pot out of newspaper with the finished Pot Maker.

 

pot en sapin bleu
By: tournar
February 04, 2008 · 2,256 views

continue de creuser

 

pot en sapin bleu
By: tournar
February 04, 2008 · 653 views

finition à la cire d'abeille

 

pot en sapin bleu
By: tournar
February 04, 2008 · 4,532 views

fin du creusage

 

pot en sapin bleu
By: tournar
February 04, 2008 · 663 views

debut du creusage

 

pot en sapin bleu
By: tournar
February 04, 2008 · 1,321 views

formation de l'exterieur

 

pot en sapin bleu
By: tournar
February 04, 2008 · 839 views

formation de l'empreinte de reprise

 

pot en sapin bleu
By: tournar
February 04, 2008 · 451 views

je dégrossi la partie extérieure

 

Return to Turning Videos

Great Bargains
(ends July 4, 2019)


Titebond® Translucent Wood Glue

On Sale for only $2.50

Save $2.49 (50%)

List price: $4.99

Franklin's Titebond Translucent Wood Glue provides a virtually invisible glue line that's stronger than the wood itself. Designed for general household and woodworking projects, it has a strong tack and fast speed of set that helps reduce clamp time. When dry, this wood glue is unaffected by finishes and sands easily.

Click here for more information or to purchase

 


Titebond Instant Bond (CA) Glue

On Sale for only $10.39

Save $2.60

List Price: $12.99

Both the 2 oz and 4 oz sizes are on sale.

Click here for more information or to purchase


Carbide Pen Turning Tools - Set of 3

On Sale for only $109.99

Save $30.00

List Price: $139.99

At only 9-1/2" long, these tools are the perfect size for turning pens, bottle stoppers and other small items. The carbide cutters can be easily rotated to expose a fresh edge. Set includes one high speed steel 1/8" parting tool, and two tools with replaceable carbide cutters: a 1/2" round cutter and a 1/2" square cutter with a 2" radius that produces an exceptionally smooth finish cut. Handles are solid ash encased in thick, molded rubber for excellent ergonomics and a sure grip.

Click here for more information or to purchase

 


Rikon 8" Slow-Speed Bench Grinder

On Sale for only $99.99

Save $40.00

List Price: $139.99

This grinder runs at 1,750 PRM for cooler grinding of your woodturning tools. It comes with two white grinding wheels: 60 grit and 120 grit. This is a great price for this tool.

Click here for more information or to purchase


Excelsior Mini Lathe

For only $249.99

Save $50.00

List Price: $299.99

The Excelsior 5-Speed Mini Lathe can turn bowls of almost 10" in diameter and spindles up to 17-3/4" in length, making it perfect for chair legs, small table legs and an endless array of decorative turnings. A convenient door provides easy access to the belt, along with 5 different speeds: 760, 1100, 1600, 2200 and 3200 RPM. Cast-iron body provides mass for minimal vibration, stable turning and maximum durability.

Click here for more information or to purchase


Rikon Open Stand 14'' Bandsaw

On Sale for only $799.99

Save $100.00

List Price: $899.99

The Rikon Open Stand Bandsaw features a host of conveniences, such as quick-release blade tension, a hinged blade guard with sight window and an onboard outlet for accessories such as lighting. In addition, it boasts a large 13'' resaw capacity and two speeds to suit different cutting operations. Precision guide bearings help to keep the blade cutting straight with minimal heat and noise.

Click here for more information or to purchase


Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Robust Tools
Arizona Carbide
Saburrtooth

(Click any Ad to go to our Sponsor's Website)