Woodturning Online Videos

Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Kits Videos (121)

Sort by

Or click here to: Search All Videos

Turning a Back Scratcher Kit
By: Gord Rock
October 10, 2019 · 1,106 views

Turning a back scratcher using a kit.

 

Route 66 Blank & Gear Shift Pen Kit
By: RJBWoodTurner
September 26, 2019 · 1,860 views

I got this Gear Shift pen kit and Route 66 blank at the Mid-Ohio Valley Pen Turners Gathering. After turning I decided to send it to Dane Thompson a Garage Hot Rodder and fellow YouTuber Dane Thompson Burn Down: https://www.youtube.com/channel/UCYQmTsbiRo7XJ_InXh7lBMw Tell him I sent you. Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

My Journey Into Wood Turning #18 - Stubby Stylus
By: mrbodawg
August 22, 2019 · 42 views

My Journey Into Wood Turning #18 - Stubby Stylus for devices like iPhone iPad. Made with Bloodwood. Videos I make are for entertainment and not instruction. Videos are how I do things / create. My safety is “my” responsibility and “your” safety is “your” responsibility. Before beginning any project, be familiar with your equipment. Read the owners manuals and make sure you understand what you are doing. Always wear the the proper personal protective equipment. Have Fun!

 

Partial pen kit
By: Gabe Castro
August 08, 2019 · 351 views

Modified partial left over pen kit.

 

Sirocco Red
By: SCCFORUM
August 01, 2019 · 59 views

Sirocco pen kit from Beaufort ink. Maple pen blank that I coloured with cactus juice and Alumilite Red. Put in a vacuum for 2 hours and then left in a pressure pot for 3 days starting at 60psi. I think it turned out good.

 

Beaufort Tempest.
By: SCCFORUM
July 28, 2019 · 64 views

Hi All, Here is a great kit from Beaufort Ink. It is the Tempest click ball point pen. The wood I used had Yellow box written on it. It has some nice patterns and has a warm colour to it. All the best, Paul.

 

Osage Soda Can Opener 231
By: Roweville Retro
July 27, 2019 · 27 views

This week, I make a soda can opener from a piece of osage orange. Music from http://www.gosoundtrack.com, under Creative Commons Attribution License: https://creativecommons.org/licenses/by/4.0

 

Woodturning Pizza Tool Handles
By: R Humphrey
July 12, 2019 · 8,514 views

Wood turning Olivewood for the first time! Very pretty wood, and easy to turn. These are some heavy duty pizza tools, hefty and hearty. I hope you enjoy the video as much as I enjoyed making the handles. The first handle is shown in real time, the second at x3 speed. OB Shine Juice recipe, courtesy of Cap'n Eddie, is as follows: Equal parts, clear shellac, boiled linseed oil, & denatured alcohol Mid video, I post new stickers on my shop wall and show off their work, and I show a very special gift that J. Oliver sent me from the UK. At the end of the video, I answer a question posed by a viewer from my last video, so please stick around for that.

 

Veggie Peeler Handles - Two Ways
By: R Humphrey
July 05, 2019 · 8,973 views

Woodturning two simple red heart handles for ceramic peelers. This woodturning project is beginner level, so it you're just starting out in the craft and looking for an easy turn, this is a good choice. I use a spindle gouge for one and a skew for the other in this short video. Thanks for watching!

 

Scirocco Black chrome
By: SCCFORUM
June 22, 2019 · 96 views

A nice pen kit from Beaufort ink. I used a Maple wood blank to give a nice contrast to the kit. Cheers, Paul.

 

Coffee Grinder Kit
By: Prokraft
May 10, 2019 · 315 views

See how to make a dome top coffee grinder kit with the Prokraft CGK. This is a very attractive kit and as the video explains it is actually rather good at grinding coffee. I make a turned kit in the video but equally you could do a square box with drawer, I've even considered a bandsaw box with this kit on the top - that's maybe a future project. Kits available here: https://www.prokraft.co.uk/woodturning-boxmaking-coffee-grinder-kit.html

 

Salad Servers
By: Prokraft
May 02, 2019 · 228 views

See me make a set of mirror polished stainless steel salad servers with our latest kit. The kit uses a central shaft so you just need to drill a hole and turn between centres. Kits are available here: https://www.prokraft.co.uk/stainless-steel-salad-server-set-kit.html

 

Byron Pen Kit Assembly
By: Prokraft
April 06, 2019 · 640 views

See how to prepare and assemble the Prokraft Byron premium fountain pen kit The Byron kit is available here: https://www.prokraft.co.uk/byron-premium-pen-kit.html

 

Bullet pen. Help for Heroes.
By: SCCFORUM
February 23, 2019 · 129 views

A very enjoyable project.

 

Acrylic ice cream paddle and bottle stopper
By: Kennett B Turned
February 21, 2019 · 184 views

This is the making of an ice cream paddle and a bottle stopper out of an acrylic swirl blank. The bottle stopper was an extra because I didn’t want an 6” handle on the scoop and didn’t want to waste the small piece of acrylic. I personally don’t care for this acrylic as it is extremely hard. Even the Easywood NR cutter didn’t want to shape it. Ended up doing most of the shaping with a Ci3 strait cutter. Paddle: https://www.woodcraft.com/products/stainless-steel-paddle-ice-cream-scoop-turning-kit Pla side polish: https://www.woodcraft.com/products/hut-ultra-gloss-plastic-polish Bottle stopper: https://www.pennstateind.com/store/BS8.html **By no means is this video instructional or educational for anyone other than me.** Please visit us on Facebook: https://m.facebook.com/KennettBTurned/posts/ Or @KennettBTurned And check out our Etsy site: https://www.etsy.com/shop/KennettBTurned?ref ss_profile Please don’t forget to like, subscribe and share with your friends!

 

Stratus Pencil Kit Overview
By: Four Oaks Crafts
January 06, 2019 · 176 views

This video gives a brief overview of the Stratus Pencil Kit. This is currently my favorite pencil kit. I encourage you to get one and give it a try. Pen Kit Suppliers List: https://www.fouroakscrafts.com/list-of-pen-kit-suppliers

 

Turning Olive wood.
By: SCCFORUM
December 27, 2018 · 187 views

This is the Rollester pen kit. Olive wood is amazing to turn. On this occasion I ended up with a few blemishes.

 

Solid brass pen kits
By: Prokraft
November 17, 2018 · 1,461 views

See me make a rollerball version of the Prokraft solid brass pen kit. A single ended pen kit that is lots of fun to make and very simple to assemble. It is different to most other pen kits as it has no brass tubes inside the blank. Pen kits are available here: https://www.prokraft.co.uk/sbfc.html

 

corkscrew Kits 2018
By: Prokraft
November 09, 2018 · 342 views

See how to easily make a wooden handled traditional corkscrew using our updated 2018 model kit. A simple but great fun project to complete that also make great gifts. Kits available here: https://www.prokraft.co.uk/chrome-corkscrew-kit.html

 

Laser Kit Christmas Ornament-Part 2
By: woodturningwithtim1
November 05, 2018 · 11,064 views

Tim shows you a new twist on a Christmas ornament. He uses a laser cut glue up kit developed by Ron Brown. Using walnut for the base of the ornament, he glues the laser cut designs to the blank. Once turned he has an ornament that looks like it was made with complicated marquetry. Part 2 of 2. Ron Brown’s Best Laser Cut Glue Up Kits: http://www.ronbrownsbest.com You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://wtwtim.com/robustlathes.htm I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Laser Kit Christmas Ornament-Part 1
By: woodturningwithtim1
November 05, 2018 · 10,808 views

Tim shows you a new twist on a Christmas ornament. He uses a laser cut glue up kit developed by Ron Brown. Using walnut for the base of the ornament, he glues the laser cut designs to the blank. Once turned he has an ornament that looks like it was made with complicated marquetry. Part 1 of 2. Ron Brown’s Best Laser Cut Glue Up Kits: http://www.ronbrownsbest.com You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://wtwtim.com/robustlathes.htm I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Woodturning: Skull Pen kit with an acrylic blank
By: Wolf Ridge Woodworking
October 08, 2018 · 244 views

Today's video will show you how to turn a pen on a lathe. Pen making is easy and a lot of fun! You can also find other woodworking and woodturning projects on my channel. My website: http://www.wolfridgewoodworking.com/ Please subscribe to my channel: https://www.youtube.com/channel/UCUVMh5tubVADcaNujTMVdGA Today's woodturning project is a Penn State Skull Antique Pewter Twist Pen Kit (#PKSKULLAP) with a Lava Bright Classic 2 Pure White with Black Thread pen blank. This is a great project for anyone who is new to woodturning. Pen making is one of the easiest projects to start with when

 

rollester pen kit assembly
By: Prokraft
October 05, 2018 · 377 views

See the assemble of the Prokraft Rollester pen kit. A large 84mm tube rollerball kit which gives the maker plenty of scope for designing a unique pen. Pen kits are available here: https://www.prokraft.co.uk/rollester-rollerball-pen-kit.html

 

Making The Bolt Action Pen!
By: Aidan Israel
September 25, 2018 · 128 views

This is the (Deer Hunter) bolt action pen so I made it with a deer antler!

 

kbh keyring kits
By: Prokraft
September 03, 2018 · 331 views

See our versatile little bead top keyring kits in action. Now you can make turned, carved, flat or even whittled shapes into an attractive and professional looking keyring. Kits available here: https://www.prokraft.co.uk/keyring-bead-kits-pack-of-4-kits.html

 

cake slice kits
By: Prokraft
August 24, 2018 · 138 views

See how to make and assemble the Prokraft stainless steel cake slice kit. A simple but enjoyable woodturning project and a useful dining accessory to make a talking point with your guests. The kit makes a super gift and is popular at craft fair stalls too. The video also shows the use of our CEC chrome end caps to make a turn between centres project. Kits available here: https://www.prokraft.co.uk/stainless-steel-cake-slice-kit-pie-slice-kit.html

 

THE 2.20 SALT MILL
By: CL Woodturning
August 12, 2018 · 200 views

Simple cheap kit from Axminster...bought in-store, not available online. Made from Laburnum

 

The Apprentice Roadster Pen
By: Aidan Israel
July 29, 2018 · 42 views

I liked this kit alot I'll be making some more in the future! Enjoy the video! Aidan

 

Pen turning-the Zen pen parts
By: Ed Brown
July 04, 2018 · 441 views

Pen turning-the Zen pen Preparing to turn the pen, checking the kit for all the necessary pieces. Common problem is the 'missing' pen nib.

 

Cigar Pen Cufflink Combo
By: Prokraft
May 13, 2018 · 508 views

See the bushing setup and assembly guide for our cigar pen kit and how to use a set of cufflink blanks to use up the spare parts of a blank to make a unique gift set. Cigar pen and cufflink combo. Please note the items described in this video are for sale on our website separately they are not sold as a set.

 

Knights Armor video
By: Chad Aubuchon
April 19, 2018 · 65 views

Cool looking pen called Knights Armor from PSI. 'Egmont Overture' and 'Egmont Overture Finale' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

Pen turning
By: SCCFORUM
April 08, 2018 · 174 views

This pen is a Craftpro kit called a D-SW series. I like the cap end, it is a little different to the norm. The polish compound got into the very fine cracks. A bit of CA would of sorted that problem out. But I do like the finish that the EEE gave to the wood. Not sure how long that finish would last on a pen.

 

Pencil conversion kits
By: Prokraft
March 19, 2018 · 292 views

See how to install a simple pencil refill into a sierra pro or cigar pen kit. Great for making a matching pen & pencil set using a quality propelling pencil conversion refill. Kits available here: https://www.prokraft.co.uk/pencil-conversion-mechanism.html

 

Atom Click Pen Assembly
By: Prokraft
March 11, 2018 · 1,138 views

See how to make and assemble the Prokraft Atom pen kit. The Atom click pen kit is very much a turners pen designed to let the maker put their own design and showcase the workmanship and materials used.

 

How to use Inserts to Make a Walnut Kitless Pen
By: Lynn Lacey
March 01, 2018 · 2,124 views

Today I’’ll’ show you How to use Alumilite inserts to prep a walnut blank to be drilled and taped to make a kitless pen. Instagram @LL_Woodworks www.LL-Woodworks.net Amazon Affiliate Link; http://amzn.to/2FIKenS In My Shop; RZ Dust Mask http://amzn.to/2whbXGY ISO Tunes http://amzn.to/2fh5QhN Ryobi 18V Palm Router http://amzn.to/2p983Pp DeWalt Random orbit sander http://amzn.to/2p5vIhA Disclaimer: My videos represent how I go about my woodworking. They are for your entertainment and not instruction. My safety is MY responsibility and YOUR safety is YOUR responsibility. Before beginn

 

Click pen in Thuya
By: SCCFORUM
February 26, 2018 · 223 views

Pen kit from Prokraft. The blank is Thuya. It turns very well and has some amazing pattern. Cheers Paul

 

sierra pro twist kit assembly
By: Prokraft
February 18, 2018 · 808 views

See how to assemble the Prokraft Sierra Pro twist pen kit. These kits have a premium quality Taiwanese twist mechanism that works differently to any standard sierra kit

 

Modifying a Slimline Pen Kit
By: RJBWoodTurner
December 22, 2017 · 14,154 views

I added a custom finial cap and a recessed trim ring to give this ordinary Slimline pen a bulkier European look. Regards, Bob Home Made Tenon Tool: https://youtu.be/CEqroK7qIRY Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Turning A Rhinehart Pen Kit in Masur Burch
By: RJBWoodTurner
December 08, 2017 · 2,792 views

I've never turned a Rhinehart pen kit before. When i got the opportunity to turn one in Masur Burch I jumped at it. Regards, Bob Preparing Acrylic Blanks for Turning: https://youtu.be/C2TgJRQQK94 Preparing Wood Blanks for Turning: https://youtu.be/gC4GW_a8Zm4 My Info: Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 Instagram: @RJBWoodturner Twitter: @RJBWoodturner E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Turning a Pen
By: Nick Oursler
November 28, 2017 · 228 views

I am turning a bolt action rifle pen kit using maple burl wood. Enjoy!

 

Chef ware Kits package
By: Sears Woodturning
November 22, 2017 · 293 views

Hey guys HUGE shoutout to Craig Lapiana who made this video and please go check his company out at http://www.chefwarekits.com/ please hit them up as they support me. Also please like and Subcribe.

 

Cadman Shaving Brush
By: Mervyn Cadman
November 20, 2017 · 276 views

Two brushes here both in the Red Carbon effect featuring the L7 handle and the M55 handle. Available through badgerandbowl.com

 

Turning a Sapphire Crush Patrizio Twist Pen For My Wife
By: Nathan Cumming
November 08, 2017 · 648 views

In this video I turn a Patrizio Twist pen from using a Sapphire Crush acrylic blank. Both the pen kit and blank were purchased from: www.Penkitsdirect.com This pen is intended for my wife, in a video to follow i'll help my wife turn her first pen which is intended to be for me. Subscribe and stay tuned for that as well as many more interesting woodturning projects. Thank you for taking the time to watch this video, especially my Subscribers for your support. If you haven't subscribed yet please visit my channel and check out my video library and Subscribe before you leave. Feel free to comment and share too. MUSIC CREDITED TO: Fantasy by Del https://soundcloud.com/del-sound Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0) https://creativecommons.org/licenses/... Music provided by Audio Library https://youtu.be/84GNW_Mx7cU

 

cheese knife set
By: Prokraft
October 25, 2017 · 3,782 views

See how to make a Prokraft stainless steel cheese knife set with wooden handles turned between centres. Kits are available here: https://www.prokraft.co.uk/stainless-steel-cheese-knife-set-kit.html

 

Wood Turning Pumpkin Carving Tool Kit
By: SP Wood Art
October 25, 2017 · 1,059 views

Every year my family and I carve pumpkins for Halloween. This year I've made a pumpkin carving tool set made from a kit (Penn State Industries). Although you can make your own carving set, you could also use power tools, but this kit should last! I hope that you enjoy this video and have a Happy Halloween. If you would like see more of SP Wood Art visit us at: www.spwoodart.com Our Webpage www.facebook.com/spwoodart www.plus.google.com/ SPWoodArt1/about www.pinterest.com/spwoodart/ https://www.amazon.com/shop/spwoodart I strive to create handmade, high quality wood pieces (and sometimes, cr

 

Magnifier kit
By: Prokraft
October 18, 2017 · 166 views

See how to make a beautiful gold plated magnifier kit with natural wood handle. A great gift to give and fun to make too. Kits available here: https://www.prokraft.co.uk/premium-magnifier-kit-2-24-carat-gold-plated.html

 

pencil kits v2 updated
By: Prokraft
September 23, 2017 · 729 views

See me make a mechanical pencil kit with the Prokraft CPP pencil kit. Now updated with the new 3-step drill. Now you can see me make the kits with normal tools or the easier & quicker way with PIP for the new 3-step drill bit.

 

Ice Cream Scoop insert
By: Lee Burkholder
September 20, 2017 · 266 views

Cumberland Valley Wood Turners, wood turning, turning, turning a ice cream scoop, making a ice cream scoop, lathe, wood working

 

corkscrew kits
By: Prokraft
September 09, 2017 · 381 views

See how easy it is to make a traditional corkscrew with a Prokraft chrome corkscrew kit. Simply drilled before turning and then turned between centres.

 

cufflinks & small kits
By: Prokraft
August 27, 2017 · 2,750 views

See how to turn a set of wooden cufflinks and set into cufflink blanks. Making cufflinks and other small woodturning kits. Rhodium plated cufflink blanks made into a unique, small and unusual gift.

 

The Common Slimline - Part 3
By: Ron Calverley
August 23, 2017 · 491 views

I want to turn a few slimline pen pencil sets in olive wood for the upcoming fundraiser golf tournament.

 

The Common Slimline - Part 2
By: Ron Calverley
August 22, 2017 · 601 views

I want to turn a few slimline pen pencil sets in olive wood for the upcoming fundraiser golf tournament.

 

The Common Slimline - Part 1
By: Ron Calverley
August 20, 2017 · 583 views

I want to turn a few slimline pen pencil sets in olive wood for the upcoming fundraiser golf tournament.

 

Woodturning / New Bottle Cap Opener From Ruth Niles / Fordite Hybrid
By: Carl Jacobson
August 14, 2017 · 22,155 views

In this video I turned a bottle cap opener using one of Ruth Niles new openers. The blank is a hybrid resin, paint & burl . Check out Ruth's website: http://nilesbottlestoppers.com/ Use RZCarl for 15% off your order https://rzmask.com/pages/woodworking/ Starbond CA Glue: https://www.starbond.com/ use SBONDCARL15 for 15% discount off of any order TOOLS I USE IN MY SHOP: https://kit.com/CarlJacobson/woodturning https://kit.com/CarlJacobson/woodworking https://kit.com/CarlJacobson/camera-gear THANK YOU FOR SUPPORTING MY SPONSORS! Robust Woodturning Tools- htt

 

bot1 & let1
By: Prokraft
August 08, 2017 · 205 views

Turn a bottle opener or letter opener with no mandrel with a Prokraft kit. Stainless steel bottle opener that only requires a 3.5mm hole through a blank and is turned between centres.

 

mechanical pencil kits
By: Prokraft
July 02, 2017 · 3,370 views

See me make a turned mechanical / propelling pencil kit with basic tools, no tubes no special equipment. Turning a Prokraft mechanical pencil kit.

 

Vanity kit turning
By: Prokraft
June 17, 2017 · 649 views

Turning decorative tops for vanity kits by Prokraft

 

Mini sketch Pencil kit.
By: SCCFORUM
May 13, 2017 · 538 views

I used Blue alumilite, Aztec Gold Pearl X and Polycraft table top 5 Epoxy resin. The wood is stabilised Poplar burr. This is my second mini pencil and this time I put it together as per instructions and it works well.

 

Rollester Pen Kit
By: SCCFORUM
May 12, 2017 · 305 views

Hi All, I made this blank with Polycraft table top 5mm Epoxy Resin. Red Alumilite and Yellow pearl X.

 

candle holder kit
By: Prokraft
May 08, 2017 · 650 views

Watch me turn an elegant candle holder, using only 2 pieces of spalted beech and a Prokraft candle holder kit. Simple, elegant, why not try one today? These kits can be obtained at: http://www.prokraft.co.uk/other-kits.html

 

perfume atomiser kits
By: Prokraft
May 07, 2017 · 1,236 views

Watch me turn a beautiful ladies perfume spray bottle with the Prokraft perfume atomiser kit. A fabulous gift and available here: http://www.prokraft.co.uk/vanity---jewellery-kits.html NB: KIT UPDATE: NOW REQUIRES A 19mm DRILL BIT Always measure your kit first before starting. This video does not form any part of an offer for sale of any item and is a guide to fitting only.

 

Pen kit
By: SCCFORUM
May 07, 2017 · 139 views

 

The Helix Pen - Part 5 (conclusion)
By: Ron Calverley
April 29, 2017 · 633 views

Turning the “Helix Pen Kit” with “Bethlehem Olive-wood”.

 

The Helix Pen - Part 4
By: Ron Calverley
April 28, 2017 · 510 views

Turning the “Helix Pen Kit” with “Bethlehem Olive-wood”.

 

How to put together Salt and Pepper Grinder Kits
By: Olivers Woodturning
April 20, 2017 · 14,351 views

This is a quick video showing how to put together the salt and pepper grinders from our Project Accessories range. As the kits don't include any printed instructions on how they go together this shows how they should look inside your turned wooden outer.

 

TM Zeta Pen kit
By: SCCFORUM
March 06, 2017 · 481 views

Hi All, This piece of wood is Poplar Burl. I stabilised it in a vacuum chamber with Stick fast. It is a fantastic looking piece of wood. The pen kit is from from Taylor Mirfield. Regards Paul

 

pepper mill kit 10'
By: Prokraft
January 17, 2017 · 4,093 views

Watch how easy it is to make a turned pepper mill with the Prokraft easy-fit salt and pepper kits. Make super wooden gifts for friends family and customers. these kits are available here: http://www.prokraft.co.uk/bar---kitchen-kits.html

 

Emperor Ballpoint Pen Kit Review
By: Lisburn Wood Works
December 14, 2016 · 531 views

Link to the product:reviewed:http://www.woodcraft.com/product/159321/emperor-twist-pen-kit-gun-metal-and-black-enamel.aspx Check out my other videos for more pen kit reviews and pen turning instruction.

 

Prokraft Premium Letter Opener Kits
By: Prokraft
December 14, 2016 · 1,090 views

Turning and assembling Prokraft letter opener kits. Information on gold plated products.

 

Indigo Ballpoint Pen Kit Review
By: Lisburn Wood Works
December 02, 2016 · 376 views

Link to the kit being reviewed: https://www.woodturnerscatalog.com/p/1/6820/Artisan-Indigo-Ball-Pen-Kit

 

Turning The Fly Fishing Pen Kit
By: RJBWoodTurner
October 24, 2016 · 9,634 views

Today I turned the Fly Fishing Pen Kit and it looks amazing! This kit is awesome! Regards, Bob Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

Simplicity Pen Kit Review
By: Lisburn Wood Works
October 18, 2016 · 436 views

My review of the Simplicity ballpoint twist pen kit. The kit can be purchased here: http://www.laulaupenkits.com/Simplicity-Ballpoint-Pen-Kit-p/simbp.htm Also note that the seller offers a 10% discount on 10 or more kits that can be mixed and matched on style. I mentioned that I really like the Norseman drill bits that are sold there as well. I had a set of turn between centers bushings made for this kit by Brian Nikitas. I sent him the kit to measure so he has the measurements for the kit. His site is here: http://nikitaswoodworks.weebly.com/store.html

 

Razor Kit
By: Chapman Crafters
October 18, 2016 · 472 views

Turning and assembling a Mach3 Razor Handle Kit in Chrome from penn state industries Kit - https://www.pennstateind.com/store/PKRAHAN.html - - - - - - Please watch: 'DYI - Silicone Mold for Pen Blanks' https://www.youtube.com/watch?v _engdA0K-wQ - - - - - -

 

Prokraft vanity kit range
By: Prokraft
October 16, 2016 · 121 views

Prokraft range of vanity mirrors, bag hanger kit and mint boxes

 

Modified Mechanical Pencil From A Slimline Pencil Kit
By: RJBWoodTurner
October 15, 2016 · 7,408 views

I made another modified Mechanical Click Pencil from a Slimline Pencil Kit. These are fun and easy to make and really show off your blank. Regards, Bob Custom Tube: https://youtu.be/9_Siv7KDgmg Modified Mechanical Pencil: https://youtu.be/nZSbJhl_xTk Facebook: https://www.facebook.com/pages/RJBWoodturner/992853487406788 E-Mail: RJBWoodturner@ufoww.com Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. https://www.youtube.com/c/WhatchaDoinBob Address for Shop Stickers: P.O. Box 114 Newburgh, IN 47629-0114

 

A Comparison of Two Pen Kits
By: Barry's Woodturning
October 11, 2016 · 5,052 views

In this video I compare two Slimline pen kits from two different suppliers. Rockler: SlimlinePen Kit in Gold US 1.99 (on sale) Craft Supplies: Apprentice Fancy Slimline Kit 24K gold US 1.79 They're almost identical, but the middle band and the clip design make me favor the one from Craft Supplies.

 

Tiny Giant Pen Kit Review
By: Lisburn Wood Works
October 06, 2016 · 662 views

This kit along with bushings and extra tubes is available from Turners Warehouse. https://www.turnerswarehouse.com/collections/tiny-giant-pen Also, I received a comment from a friend that some other 8mm kit bushings will not fit in this tube, so you'll probably want to either order the bushings or turn between centers with no bushings.

 

Trash Amp Portable Amplifier DIY Kit
By: Carl Jacobson
June 03, 2016 · 18,255 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg Portable speakers for your smartphone, electric guitar, and more! This portable amplifier from Trash Amps can be made from, just about anything. I made this Walnut enclosure for mine, but you can use anything from pop cans to mason jars. If you make this project please share. I'd love see what you come up with. Trash Amps https://www.trashamps.com/ Chris Pine https://www.youtube.com/watch?v oFJmXFUZeTs I put together a Amazon store with some of the tools I use. http://astore.amazon.com/thewood0c-

 

Acorn Makers Kit
By: Ron Brown
May 09, 2016 · 1,742 views

A complete tool kit for making specialty Acorn Lidded Boxes by RonBrownsBest.com

 

American Patriot Pen Kit Review - PSI
By: Lynn Lacey
April 10, 2016 · 1,127 views

In this video I will review the American Patriot Pen sold by Penn State Industries. If you love American and the foundations on which it stands, you will appreciate this pen kit. The hardware features embossed details such as the bald eagle, laurel leaf, God Bless American on the center band, and a stars and stripes clip. Contact me if you would like to own show your love for America by owning one of these beautiful writing instruments. Mandrel Saver and other Pen Turning supplies offered by PSI http://goo.gl/y7ULNm www.ll-woodworks.net Instagram www.instagram.com/LL_Woodworks Facebook https://www.facebook.com/LL-Woodworks-397970183658553

 

Pepper Mill/Salt Shaker Combination Kit Turning Demonstration
By: Peter Stewart
February 26, 2016 · 4,583 views

This video covers the turning of a pepper mill/salt shaker kit from Backgate Industries. Buy the kit: http://www.arizonasilhouette.com/prod... Backgate Industries: http://www.backgateindustries.com ----------------------------------------­-------- My website: www.peterturnswood.com ----------------------------------------­- My vlog channel: https://www.youtube.com/channel/UCiST... ----------------------------------------­--------------------------------------- If you would like a sticker, send me a stamped self addressed envelope or one of your own stickers with your address. Peter Matthew 6388 East Executive Drive Westland, MI 48185 Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080 Subscribe to my YouTube Channel! I post videos every Friday!

 

Nautical Pen kit with Bethlehem Olivewood
By: Nick MacDonald
December 15, 2015 · 468 views

Turned this as a Christmas gift for my Dad. Used the antique pewter Nautical pen kit with Bethlehem Olivewood. The shavings from the olive wood have a real nice aroma and I saved them to hopefully use in a future Alumilite casting project. Music: Sunny - Bensound.com

 

Gluing Guides for Laser Cut Kits
By: Ron Brown
December 09, 2015 · 1,599 views

Ron Brown has designed Gluing Guides to assist in the gluing process for his Laser Cut Kits. More info at www.ronbrownsbest.com

 

Carbide Roughing Gouge (Kit from Rockler)
By: Barry's Workshop
October 26, 2015 · 1,206 views

In this video, I make a handle and assemble the Carbide Roughing Gouge kit from Rockler. This is a roughing tool, so it removes material well, although it doesn't produce a particularly smooth finish. But not having to sharpen the tool should be a big plus! I made the handle from laminated pallet wood and finished it with a shop-made finish that contains Boiled Linseed Oil and varnish. Music is written by Kenny Dorham, performed by Barry.

 

Woodturning with Tim Yoder-Gear Pen Kit
By: woodturningwithtim1
September 29, 2015 · 2,271 views

It's a pen, it's a puzzle and it's a great turning project! Look over Tim's shoulder as he shows you how to customize a kit pen that's much more than a turning project.

 

Turning gifts - seam ripper stiletto from PSI kit using Bog Oak Blank
By: H F Bowern Designs - Harold Bowern
September 17, 2015 · 2,450 views

Welcome Back!! Well in this video I am turning a gift. It is a seam ripper and stiletto from a PSI kit. I am using a blank of Bog Oak that is according to the certificate sent with the blank, is approx 5,590 years old. The blank is fitted with the tube from the kit.For this turn I used a roughing gouge and 1/2' spindle gouge to do the shaping. I finished this project with The Doctor's Workshop Walnut Oil and Wax. Thanks again for watching. If you like this video, please click the 'Like' button. If haven't already don't forget to click the 'Subscribe' button, to continue watching more of m

 

making pen from faux stone from ExoticBlanks.com
By: Ed Brown
September 08, 2015 · 4,711 views

Turning 'Faux Stone', a new offering from ExoticBlanks.com Things don't go exactly as planned--how to solve surprise development!!

 

Turning a Jousting Lance and Pen from a Slimline kit #18
By: I Turn Two
September 06, 2015 · 1,155 views

Turning a slim line kit into a 14' jousting lance pen. Utilizing a section of red maple for the display base.

 

Turning gifts - coffee scoop from PSI kit usiing acrylic blank
By: H F Bowern Designs - Harold Bowern
September 03, 2015 · 581 views

Welcome Back!! Well in this video I am turning a gift. It is a coffee scoop from a PSI kit. I am using a blank of acrylic that I have on hand and not one of coffee bean blanks as suggested in the kit. The blank is a normal size pen blank cut and fitted with the tube from the kit. I am not a pro turner, nor have I had much experience turning acrylic. It was a bit of a challenge choosing the coreect tools and I went through a few. In the end I mostly used a roughing gouge and skew for scraping. I finished the project with Huts Ultra Shine. Thanks again for watching. If you like this video, p

 

Turning gifts - pizza cutter from PSI Kit using Osage Orange blank
By: H F Bowern Designs - Harold Bowern
August 24, 2015 · 3,945 views

Welcome back. Today I am turning a handle for a large pizza cutter kit. This is a kit I got from my local pen turning supplier William Wood-Write in Guelph Ont. I am using a 2 1/4' square by 6' long piece of Osage Orange. Thanks again for watching. If you like this video, please click the 'Like' button. If haven't already don't forget to click the 'Subscribe' button, to continue watching more of my videos. Tell all your friends about my channel, I really would appreciate that. You can also visit my website, http://hfbowern.com , where you will find samples of my woodworking projects, my BLOG, and other things about me and my hobbies. If you would like to follow my gardening projects on YouTube, you can find me at my YouTube gardening channel at https://www.youtube.com/user/TheOldWoodworker Until next time take care in your shop, stay safe and bye for now. I hope to see you on down the road!

 

#24 Scratch Awl Kit
By: Yuval Lahav Woodturning
July 16, 2015 · 22,602 views

It only took me 7 months, but I'm finally turning the scratch awl I won in Carl and Alan 2014 Christmas ornament challenge! Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Swear and Shake - Suddenly Kevin MacLeod - Slow Burn All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Pen Turning Kits
By: Jamie Coyle
June 17, 2015 · 59 views

Visit this site http://www.timberturners.com/TurningProjectKits-s/25.htm for more information on pen turning tools. Making custom pens is a very enjoyable hobby. Many woodworkers do nothing else, as this is an easy way to make a project from start to finish in very little time. It doesn't require a large investment in tools and materials, or require a large work space. Therefore opt for the best pen turning tools and make beautiful pen. Follow Us: http://penmakingkits.blogspot.com/2015/06/pen-turning-tools.html

 

Laser Cut Glue-Up Kit Preview
By: Ron Brown
June 05, 2015 · 880 views

Ron shares his gallery of Laser Cut Glue-Up Kits showing Christmas Ornaments and other turned items using wood and acrylic. A full length DVD is now available to walk you through the gluing and turning process Ron uses to make these fabulous projects. More info at www.ronbrownsbest.com

 

Pencil Kits
By: Jamie Coyle
May 14, 2015 · 49 views

Handmade pencils make beautiful gifts, and do a great job of displaying the quality of figured wood as well as the expertise and creativity of the woodworker. Browse this site http://www.timberturners.com/PenKits-s/23.htm for more information on pencil kits. Choose the best pencil kits to make that perfect handcrafted pen which will make an awesome gift for friends. Follow us http://penmakingsupplies.tumblr.com/PencilKits

 

Pen Kits
By: Jamie Coyle
May 14, 2015 · 22 views

Visit this site http://www.timberturners.com/PenKits-s/23.htm for more information on pen kits. Making custom pens is a very enjoyable hobby. Many woodworkers do nothing else, as this is an easy way to make a project from start to finish in very little time. It doesn't require a large investment in tools and materials, or require a large work space. Choose the best pen kits to make that perfect pen. Follow us http://penmakingkits.blogspot.com/2015/05/pen-kits.html

 

Laser Cut Glue-Up Kits
By: Ron Brown
April 20, 2015 · 6,443 views

Ron Brown's Best introduces new kits which can be used to make Christmas Ornaments, Turned Lidded Boxes (Sides or Tops as Inlay) Bowl Inlays, Segmented vessel feature rings, etc. More info at www.ronbrownsbest.com

 

Pluma Circuito Electronico Azul
By: Levier Fine writing Instruments
January 31, 2015 · 332 views

Levier Presenta La Pluma Electronica Color Azul

 

Wood Turning 101: Pen Turning: The Slim Line Pen Kit Introduction
By: Turning Round
January 23, 2015 · 7,686 views

This is a basic video that introduces the basic pen kit that most wood turners start with. The slim line pen kits is a nice kit and easy to get started with in pen turning.

 

Ruth Niles Bottle Stopper Kit
By: Carl Jacobson
December 26, 2014 · 26,968 views

Checkout my new video https://www.youtube.com/watch?v fM2sH8zZ_eQ&lc UgwBLKyTyFP0vLujV3x4AaABAg I just got Ruth Niles kit for making bottle stopper. Bottle stoppers make great gifts, and a great way to use up scraps. I turned all of these on the lathe. Zac Higgins https://www.youtube.com/user/NVWoodwerks Walter Ambrosch 'The WoodWorking Collective' https://www.facebook.com/groups/the.woodworking.collective/ or email me at: waltamb@npacc.net Thank you for supporting my channel Schedule one-on-one online classes jacobson68@yahoo.com Thank you for supporting fr

 

Pluma Circuito Electronico Negro
By: Levier Fine writing Instruments
December 26, 2014 · 515 views

Pluma de Circuito Electronico Negro Una Verdadera Obra de Arte...

 

Pen Making Kits
By: Jamie Coyle
December 13, 2014 · 44 views

Visit this site http://www.timberturners.com/ for more information on Pen Making Kits. Pen Making Kits are a wonderful way for you to pick up a hobby that would allow you to reflect the unique elements of your personality. Since there are many different kits available to you, it is easy to find something that you would be happy with.

 

45 caliber pen kit
By: Ed Brown
November 23, 2014 · 2,531 views

Ed turns and assembles the new 45 cal pen kit from Berea. Special attention is given to the asembly process.

 

Pen kit--NEW Glacia from ExoticBlanks
By: Ed Brown
September 06, 2014 · 3,000 views

Ed turns and assembles the new Glacia pen kit from Berea. Available in Chrome, Gunmetal or Upgrade Gold (cobalt alloy). FINIAL twist design, with a longer tube--simple to make, elegant to sell!!

 

Levier Casting Products Metallic Colors
By: Levier Fine writing Instruments
September 02, 2014 · 440 views

Levier Casting Products We present our new line of Metallic colors. world Class Quality and Advance Engineering Pen Blanks info.levier@gmail.com

 

Rotur Deluxe Pen Turning Kit
By: Olivers Woodturning
August 16, 2014 · 5,016 views

This is the Rotur Deluxe Pen Turning Kit. It allows you to create your own pens using wood or acrylic blanks turned to your preferred shape. The kit contains everything you need to make as many pens as you want and enough pen kits to create 5. Additional pen kits are available. For more info visit https://www.oliverswoodturning.co.uk/product/rotur-deluxe-pen-turning-kit

 

Pepper Mill Makers Kit and DVD
By: Ron Brown
July 21, 2014 · 760 views

Short introduction to Ron Brown's Best Salt and Pepper Mill Makers Kit with full length how-to step-by-step DVD. More info at www.ronbrownsbest.com

 

Acorn Kit
By: Ron Brown
July 14, 2014 · 1,811 views

Ron Describes his brand new 4 piece Acorn Kit for making turned lidded Acorn Boxes.

 

Cambridge pen dressed in antique ivory (resin)
By: Ed Brown
April 26, 2014 · 1,445 views

Made to look like antique ivory, this manufactured resin product is not difficult to turn into a stunning pen. I have chosen the Cambridge, in gunmetal with tigold appointments!!

 

zodiac circuit board pen from ExoticBlanks.com
By: Ed Brown
April 06, 2014 · 1,031 views

Zodiac pen kit, exclusively at ExoticBlanks.com is turned with a 'circuit board component' pen blank. The purpose is to see whether the components are taller than the finished diameter of the pen.

 

craftcoat brand pen finish from ExoticBlanks.com
By: Ed Brown
March 22, 2014 · 2,532 views

Now available at ExoticBlanks, Craft Coat pen finish is demonstrated.

 

500 008 ESP Pluma Rojo y Dorado en Acrilico Transparente
By: Levier Fine writing Instruments
December 26, 2013 · 864 views

 

Zodiac Pen Kit from Exotic Blanks is shown.
By: Ed Brown
December 22, 2013 · 1,356 views

The new Zodiac pen solves a couple design problems with this single-barrel style pen Easily chages from stylus to standard pen, stylus is easily replaced. If threads on transmission 'disappear' into the cap, the condition is EASILY fixed.

 

Stars and stripes laser kit-Sunday night movie
By: Ed Brown
December 08, 2013 · 4,452 views

Assembling the Stars and Stripes laser Kit

 

How To Pick The Perfect Pen Kit
By: Phil Gershwin
December 04, 2013 · 66,081 views

Gershwinwoodcraft shows you what pen kit to start your wood turning adventures with. Check out more of my work at http://www.gershwinwoodcraft.com/GershwinWoodcraft/Welcome.html Thank you for watching.

 

longline slimline
By: Ed Brown
November 24, 2013 · 1,235 views

A new pen kit!! The Longline features a longer lower tube to give a more elegant, stylish look to the pen. We expect this to be more comfortable and appealing to women!!

 

Pen Turning, Making a Wall Street II Pen kit Part 4
By: Turning Round
September 27, 2013 · 867 views

This is a follow up to the previous three videos about making a Wall Street II Pen. I turn the second barrel and then apply a CA glue finish. Woodturning Project Kit for Wall Street II Pen Kit, Chrome https://www.amazon.com/gp/product/B0035Y97M0/ref as_li_tl?ie UTF8&camp 1789&creative 9325&creativeASIN B0035Y97M0&linkCode as2&tag turninground-20&linkId 2c4ced84ded4eee3bda7f18f2405b936 Woodturning Project Kit for Wall Street II Pen Kit, Standard Gold Finish https://www.amazon.com/gp/product/B0035YDB0O/ref as_li_tl?ie UTF8&camp 1789&creative 9325&creativeASIN B0035YDB0O&linkCode as2&tag turni

 

Pen turning, making a Wall Street II pen kit Part 2
By: Turning Round
September 26, 2013 · 1,598 views

This is a video of making a Wall Street II pen using Bethlehem olive wood and a wood lathe. An Instructional Pen Turning video. I show details on how to prepare and turn an Wall Street II Pen on a Wood Lathe. I cover all the steps involved with selecting a kit, a pen blank, drilling and gluing, and the process of making the pen. Woodturning Project Kit for Wall Street II Pen Kit, Chrome https://www.amazon.com/gp/product/B0035Y97M0/ref as_li_tl?ie UTF8&camp 1789&creative 9325&creativeASIN B0035Y97M0&linkCode as2&tag turninground-20&linkId 2c4ced84ded4eee3bda7f18f2405b936 Woodturning Projec

 

500 002(ESP) Pluma Jing Jang
By: Levier Fine writing Instruments
September 22, 2013 · 143 views

Levier Fabricante de instrumentos finos de escritura tiene el gusto de presentar la pluma jing jang hecha con un acrilico fabricado por Levier

 

Modular Micro Pen Turning Kit
By: Robert Sorby
April 26, 2013 · 12,542 views

The modular micro pen turning kit provides a dedicated tool selection designed to meet the specific requirements for turning pens of the highest quality. In this film we see the completion stage-by-stage of a pen turning project. The pen set is one of five dedicated modular micro kits that display the flexibility of a system designed for turners who like to work on smaller and miniature projects.

 

Kallenshaan Woods Stars & Stripes Kit - Part 2
By: penturners
December 30, 2008 · 2,117 views

Kallenshaan Woods Stars & Stripes Kit. Part 2 - Lower Barrel Assembly. By Ed Davidson (YoYoSpin)

 

Kallenshaan Woods Stars & Stripes Kit - Part 1
By: penturners
December 29, 2008 · 3,758 views

Kallenshaan Woods Stars & Stripes Kit. Part 1 - Upper Barrel Assembly. By Ed Davidson (YoYoSpin)

 

Return to Turning Videos

Great Bargains
(ends November 27, 2019)

Customized Electric Branding Iron

On Sale for only $99.99

Save $20.00

List price: $119.99

This customized, 110V electric branding iron will let you imprint your woodturnings in way that will never fade away. You will be able to order from fifteen different standard-size design choices, enter your custom text and proof the final design. The delivery of your custom burning head will take 2 - 3 weeks.

Click here for more information or to purchase

 

Rockler Mini Carbide Pen Turning Tools

On Sale for only $149.99

Save $70.00

List Price: $219.99

This three piece set has comfortable rubber handles which provide excellent control and reduce fatigue—replaceable carbide tips require no sharpening. The 3-piece sets comes with diamond, square and round carbide tipped tools.

Click here for more information or to purchase

 

Bar Tool Turning Kits

Get the 5 Piece Set for only $68.95

Save $15.00

Everything you need to turn out cocktails that friends will rave about—includes all five of their Bar Tool Turning Kits in one cost-saving package. Includes: bottle opener, double jigger, muddler bar, bar spoon, cocktail strainer and 5 threaded inserts.

Click here for more information or to purchase

Pen Press/Drilling Jig

For only $89.99

Save $10.00

List Price: $99.99

Drill and assemble your pens perfectly with flush fittings and a smoothly-operating mechanism! This dual-purpose jig takes care of both prep work and assembly. It holds your blank firmly in position for drilling, creating a precise, perfectly centered hole the entire length of the pen. Later, it smoothly presses your parts together without any bowing or misalignment. Notched jaws automatically center the blank for drilling, while two countersunk holes center the parts during assembly. Large clamping wheel provides slow, controlled pressure so you'll never crack a casing again.

Click here for more information or to purchase

Trend® Air Circulating Airshield Pro

For only $369.99

Save $30.00

List Price: $399.99

Protect your lungs, face and eyes during virtually any woodworking task with the air-circulating Trend® Airshield Pro. Its built-in fan circulates filtered air to prevent fogging, provide cooling and protect users from dust particulates down to 0.6 microns in size at a 98% efficiency rate. This model also meets ANSI Z87+ standards for eye-protection. It features an improved headband with a ratchet suspension and pivoting nape back strap for enhanced comfort, fit and durability. The nickel metal hydride battery allows for up to eight hours of operation on a full charge, twice the length of previous models. Includes a charger, airflow indicator and pre-installed plastic film overlay to prevent buildup of sap after heavy turning jobs, and to prevent scratching.

Click here for more information or to purchase

 

Woodturning Products of Interest

 



Easy Wood Tools 3” Diameter x 1” x 8 TPI Precision CNC Machined Anodized Aluminum Faceplate

 

 



Crown 280 HSS Woodturning Set, 5-Piece

 

 



Wood Turning Tool Sharpening Wheel Cbn Grit: 80 Wood Turner Wood Turners Disc

 

 



Woodturning Wizardry

 

 



Woodturning Methods (Darlow's Woodturning series)

 

 



Stuart Batty Angle Gauge One

 

 



Easy Wood Tools Ci1-R4 Square Carbide Replacement Cutter with 4 Radius for Full and Pro Size Roughers Lathe

 

 



Sorby Sovereign 6 Piece Turning Tool Boxed Set

 

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Rockler
Flutemaster
Arizona Carbide

(Click any Ad to go to our Sponsor's Website)