Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Ornament Categories

 

Misc Ornaments Videos (547)

Sort by

Or click here to: Search All Videos


Woodturning - Natural Edge Christmas Ornament
By: Carl Jacobson
November 30, 2018 · 1,708 views

Check out my gear on Kit: https://kit.com/CarlJacobson The guys at Easy Wood Tools asked me to make a Christmas ornament for their tree at their shop. I made a natural edge void in one side and cut out a star of Bethlehem to hang on the inside. To make the natural edge void I drilled into one side with a forstner bit before hollowing it out. Alan Stratton http://www.aswoodturns.com/ Woodcraft https://www.woodcraft.com/stores/phoenix https://www.facebook.com/WoodCraftChandler/ Tools and supplies I used in this video ------------------------ Maple and Walnut Lathe Robust: http://www.turnr

 

Woodturning Christmas Tree Ornament Finials
By: Mike Peace Woodturning
November 30, 2018 · 1,029 views

I show how to wood turn a finial and cap in this part 2 video on making a hollow globe Christmas ornament. Turning a thin delicate finial can be a design and turning challenge. But it is also rewarding. Click here to watch Part 1 on turning the Globe: https://youtu.be/JVcn92pFkfQ I upload new wood turning videos regularly so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

12 Days of Tree Ornaments - Day 1 Baubles - Episode 158
By: Paul Lockwood
November 30, 2018 · 21 views

A mini series of small videos making small tree ornaments for the festive season. Hopefully this will inspire you to go and make one. Day 1 - Baubles Day 2 - Day 3 - Day 4 - Day 5 - Day 6 - Day 7 - Day 8 - Day 9 - Day 10 - Day 11 - Day 12 - You can find me on the below Social Media Instagram: https://www.instagram.com/paul.a.lockwood/ @paul.a.lockwood Twitter: https://twitter.com/paullockwooduk @paullockwooduk Facebook: https://www.facebook.com/PaulLockwood.Woodworking/ Pinterest: https://www.pinterest.co.uk/lockwood3538/ Etsy: https://www.etsy.com/uk/shop/PaulLockwoodUK Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

Quick Acorn Ornament
By: Golden Antlers Woodturning
November 28, 2018 · 17 views

The season is almost here, and it's time to crank out the ornaments. As a personal challenge, I did it all with the same parting tool

 

Making & Woodturning - A Pine Cone and Alumilite Resin Hybrid Christmas Decoration 2018
By: Sam Thomas - Twisted Crafts UK
November 24, 2018 · 2,635 views

In this weeks video i make a hybrid blank using a pine cone and Alumilite resin. Turning it into a christmas decoration. ................................................................................... Facebook: https://www.facebook.com/twistedcraftsuk/ .................................................................................... Instagram: https://www.instagram.com/twistedcraftsuk/ ..................................................................................... Check out https://craftycultures.com/ Crafty Cultures is a new UK based buying and selling platform for all th

 

Wood Turn a Hollow Globe Ornament Pt1
By: Mike Peace Woodturning
November 23, 2018 · 3,196 views

I show how to turn a hollow globe Christmas ornament on your wood lathe. Turning hollow globe ornaments offer some challenges but a lot of satisfaction when you complete one. If you have a little bit of turning experience, you should be able to turn one of these and I am going to show you how as well as the tools I use. In Part 2 I demonstrate turning a finial and cap to go with the hollow globe. Click here to link to Part 2 https://www.youtube.com/watch?v ogvNp1W6jEw&t 6s I upload new wood turning videos regularly so Ya’ll come back, hear? Want to support my channel? Check out my Amazon

 

How to make an Incredible Burl Christmas Tree Ornament
By: Moonpie Creations
November 23, 2018 · 186 views

Every year Alan Stratton over at As Wood Turns puts on a Christmas Ornament Challenge. With that in mind I decided to use a piece of burl and some purple heart to make a pretty cool ornament. You can find me on Facebook https://www.facebook.com/moonpiecreat... Instagram moonpie_creations Twitter MPC_Ken

 

Lantern Ornament Bob Baucom
By: Northcoast Woodturners
November 20, 2018 · 33 views

Bob Baucom demonstrates how he makes his lantern ornament.

 

Balloon Ornament Bob Baucom
By: Northcoast Woodturners
November 20, 2018 · 22 views

Bob Baucom demonstrates turning his balloon ornament.

 

Penguin Ornament Bob Baucom
By: Northcoast Woodturners
November 20, 2018 · 26 views

Bob Baucom demonstrates how he makes his Penguin Ornaments

 

Candle Ornament Bob Baucom
By: Northcoast Woodturners
November 20, 2018 · 29 views

Bob Baucom demonstrates how he makes his Candle Ornament.

 

Inside Out Christmas Ornament-Part 2
By: woodturningwithtim1
November 19, 2018 · 8,665 views

By using some clever turning techniques, Tim shows how to make an ornament with as much going on inside, as outside. Part 2 of 2. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://wtwtim.com/robustlathes.htm I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Inside Out Christmas Ornament-Part 1
By: woodturningwithtim1
November 19, 2018 · 9,188 views

By using some clever turning techniques, Tim shows how to make an ornament with as much going on inside, as outside. Part 1 of 2. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://wtwtim.com/robustlathes.htm I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Woodturning Planetary Ornament - Insert Fun
By: As Wood Turns
November 16, 2018 · 1,836 views

http://www.AsWoodTurns.com This one is my daughter's favorite ornament of all my recent ornaments. It used a piece of scrap walnut and other left over thin wood strips to create random angle slices in the body. This I call my 'Saturn' style. For this ornament, it is important to drill a center hole entirely through the ornament. Then insert a dowel in the hole to keep the pieces aligned when gluing. Unfortunately, then the dowel has to be drilled out again after each slice is glued to align the next cut. With the final slice, I still drill out the center to hold the finials in place. The wo

 

Inside out Christmas Ornament
By: Mauro il tornitore
November 15, 2018 · 207 views

This video describes how I made an inside out Christmas ornament for the Christmas Challenge 2018. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Questo video descrive come ho realizzato un ornamento natalizio per la Challenge 2018. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

Segmented Woodturning - Not A Plain Christmas Ornament
By: As Wood Turns
November 09, 2018 · 2,120 views

http://www.AsWoodTurns.com What do you do with leftover wood? How about when you worked a lot to make a laminated blank? In this case I had to make additional segmented rings to have enough for the globe of the ornament. It is traditional when describing a segmented piece to describe the number of segments. In this case, there are eight main rings but the piece count varies with each ring. Did I handle each piece individually? No. But I still count them individually. Counting all the pieces, this ornament has 147 pieces of wood, Oak, cherry, yellowheart,maple, walnut, and a tropical hardwo

 

Super Easy Angel Center Piece/ How To
By: Moonpie Creations
November 09, 2018 · 136 views

Yes I used a lathe, duh. But seriously this is super easy to make. Although I was not happy with the end shape the concept is sound. I used scrap IPE and Tiger wood, but you could use any contrasting woods. I hope you enjoy and please share, comment and hit that thumbs up while you are here. You can find me on Facebook https://www.facebook.com/moonpiecreat... Instagram moonpie_creations Twitter MPC_Ken

 

Turning a Hollowform Ornament
By: Dread Knot Woodshop
November 07, 2018 · 253 views

Learn how to turn a hollow form ornament in this episode. Use Code 'DJ15' for 15% off your CA adhesives order at https://www.starbond.com

 

Laser Kit Christmas Ornament-Part 2
By: woodturningwithtim1
November 05, 2018 · 8,708 views

Tim shows you a new twist on a Christmas ornament. He uses a laser cut glue up kit developed by Ron Brown. Using walnut for the base of the ornament, he glues the laser cut designs to the blank. Once turned he has an ornament that looks like it was made with complicated marquetry. Part 2 of 2. Ron Brown’s Best Laser Cut Glue Up Kits: http://www.ronbrownsbest.com You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://wtwtim.com/robustlathes.htm I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Laser Kit Christmas Ornament-Part 1
By: woodturningwithtim1
November 05, 2018 · 8,641 views

Tim shows you a new twist on a Christmas ornament. He uses a laser cut glue up kit developed by Ron Brown. Using walnut for the base of the ornament, he glues the laser cut designs to the blank. Once turned he has an ornament that looks like it was made with complicated marquetry. Part 1 of 2. Ron Brown’s Best Laser Cut Glue Up Kits: http://www.ronbrownsbest.com You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://wtwtim.com/robustlathes.htm I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Hollow Sphere Ornament - Ornamento a sfera cava
By: Mauro il tornitore
October 31, 2018 · 184 views

This video describes how I made an hollow sphere ornament for the Christmas Challenge 2018. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Questo video descrive come ho realizzato un ornamento a sfera cava per la Challenge 2018. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

BayLake Woodturners - Ornaments (Oct 2018)
By: BayLake Woodturners
October 30, 2018 · 137 views

Three demonstrations that show how to turn Christmas ornaments. Presenters are Kelly Bresnahan, Tim Harteau, and Gerald Jensen. Recorded during our regular monthly meeting October 20, 2018 at the NWTC Artisan Center, 1417 Cedar Street, Green Bay, Wisconsin.

 

Wooden Cubes Turned Off Axis
By: Gord Rock
October 30, 2018 · 1,925 views

Turning wooden cubes off-axis, then staining & painting. Just a little experiment for fun!

 

Wood Turning Club - Making a Christingle for Club Competition
By: caitlan the cat
October 27, 2018 · 977 views

It is my Wood Turning Club Christmas fayre in a few weeks time and the competition is Xmas Themed. So I decided to turn a Christingle. To make the orange, candle and silver star I used a piece of Oak, for the cocktail sticks with cherries on them I used a piece of Walnut and a piece of cherry wood to turn the flame. I stained and painted the woods to get the right colours and added I ribbon around the outside to finish it off.

 

christmas tree decoration
By: Cj woodturning
October 27, 2018 · 24 views

christmas tree decoration

 

Woodturning Christmas Hand Bell - Laminated and Segmented
By: As Wood Turns
October 26, 2018 · 2,388 views

http://www.AsWoodTurns.com Preparing for this year's Christmas Ornament Challenge, this hand bell was inspired by a presentation by Robin Costelle at the Segmented Woodturning Symposium. However, it does deviate from his bell in that it has multiple layers or rings. The wood in the bell is maple, cherry, walnut, yellow heart, and red oak. The handle is gum. The bell and handle are finished with shellac friction polish. Strips of wood are first laminated into a solid block. In turn, this block was cut at 45 degree angles to make 2 rings with complementary patterns. After these rings were g

 

turned Christmas tree decoration
By: Cj woodturning
October 22, 2018 · 38 views

turned Christmas tree decoration made with laburham pen blank on myford ml8 wood lathe

 

How To Turn Perfect Golden Mean Ellipse Christmas Ornament
By: As Wood Turns
October 19, 2018 · 1,958 views

http://www.AsWoodTurns.com For my first entry to this year's Christmas Ornament Challenge, I chose a traditional globe style ornament with bottom icicle finial. I wanted the globe to be a perfect ellipse similar to a perfect sphere. Of course, a perfect ellipse would express the Golden Mean. However, a perfect ellipse does not fit into a regular polygon. Instead, I used the math to graph an ellipse to define the diameter at the middle and three points between the middle and the end. These factors are multiplied by the length of the ellipse cylinder as follows: 0.0% 0.618 Middle or maximum

 

Wood Turning Club - Making a Christmas Bauble Spindle Turning Spalted Beech
By: caitlan the cat
October 14, 2018 · 1,367 views

Having seen the amazing bauble kits that Emma - The Tiny Turner has made I really wanted to have a go at making one. So this week at Wood Turning Club I used spalted beech to spindle turn the top and bottom to fit onto a bauble and then make it up. I used the Chestnut Buffing system to get a really nice shine on the finished wood. I really think that the spalting of the wood shines out when the lights are on. I cannot wait for Christmas so that I can put it on the tree! The kits are really cool and all you need to do is add the wood and glue. You can get them from The Tiny Turner Etsy Shop - https://www.etsy.com/uk/shop/TheTinyTurner

 

Turning a hollowed Christmas ornament with finial with Ken Staggs
By: Windy City Woodturners
October 10, 2018 · 316 views

Ken Staggs is a member of the Chicago Woodturners. He designs and sell many woodtured objects. In this demo Ken shows the processes he uses to make his signature Chiristmas ornaments. He discusses each process as he shows his skill with his bowl and spindle gouge.

 

Button Style Christmas Ornament – The Sphere by Dan Douthart
By: Gwinnett Woodworkers
September 22, 2018 · 1,363 views

Dan demonstrates how to accurately layout the three axes that are used to turn the sphere for the Button Style Christmas Ornament. These axes are then used to turn the sphere. The ghost image method and templates are used to turn the sphere. Recorded and presented in HD 09/15/2018 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Woodturning Christmas candle blanks
By: Patrick Murphy
September 22, 2018 · 4 views

Producing blanks with aid of a steb centre which allows changing blanks without having to turn the lathe off

 

Woodturning - TIE Fighter Christmas Ornament
By: Carl Jacobson
September 21, 2018 · 6,239 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII This is a pretty easy project that only takes a few hours. I turned the body on the lathe, and cut the wings on the band saw. I used Walnut for both Tie fighters on one I painted gilding cream on the wings. They're 3 1/2' by 3 1/2' and I finished them off with Howard wax. Instagram https://www.instagram.com/thewoodshop.tv/ Ornamental Turning http://ornamentalturners.com/ Ornamental Turning https://www.facebook.com/groups/793297734097301/

 

woodturning a Christmas candle decoration
By: Patrick Murphy
September 21, 2018 · 7 views

use of spiraling tool to make Xmas decoration

 

#45 - Christmas Tree Ornament... Done a little different
By: Billy Burt
September 16, 2018 · 114 views

In this episode I was inspired by something Phil at Madrona Woodworks posted not long ago so I started with a plan in mind. It didn't work out so I switched directions. I had an order for a Christmas tree shaped ornament and used the piece I started with to turn the tree from. Many turners turn trees, but I do mine a bit different. Thanks for watching! Madrona Woodworks video: https://www.youtube.com/watch?v fuN0yG9e-gc&t 9s Questions? Contact me - Alamo City Diverse Creations: alamocdc@gmail.com I am a proud member of Makers Media Network: https://makersmedianetwork.com If you wish to support The Messy Studio I have t-shirts and coffee mugs for sale. T-shirts are available at: https://makersmedianetwork.com/index.php/product/billy-burt-sr-logo-shirt/ Coffee Mugs are available at: https://makersmedianetwork.com/index.php/product/the-messy-studio-logo-mug

 

Turned Xmas tree decoration by Bob Lee’s Woodshop
By: Bob Lee's Woodshop
September 16, 2018 · 102 views

A proud member of Makers Media Network

 

Decoration Bead Sets
By: Prokraft
September 08, 2018 · 77 views

See our small bead kits used to hang your own turned decoration. These great little beads even hide the knot for a really tidy finish

 

hand turned christmas decoration
By: Wayne the Woodturner
September 08, 2018 · 1,195 views

Hand turned Christmas decoration, I got the Bauble from Emma Cook, it has LED lights inside. The Tiny Turner. https://www.etsy.com/uk/shop/TheTinyTurner?ref shop_sugg. Finished with Black gloss paint and Jo Sonja iridescent paints

 

Turned Christmas Ornament
By: Sawdust and Shavings
August 06, 2018 · 39 views

hope you enjoy watching this little video of me turning one of my Christmas Ornaments. music by Jeremy Blake via YouTube Creator Studio you can also check me out on Facebook https:/www.facebook.com/qswwllc Instagram https:/www.instagram.com/johnboybaker1985 Twitter https:/www.twitter.com/quartersawnwoo1 and Etsy https:/www.etsy.com/QSWW

 

Christmas in July
By: Dry Creek Woodturning
July 04, 2018 · 49 views

July 4 is my day to design the years ornaments Please like, comment and share

 

HotAirBallonOrnement
By: West Island Woodturners
April 24, 2018 · 48 views

Fred Scallion does a miniature hot air ballon for the Christmas tree 2017

 

Christmas tree bauble Love HeartWood
By: Love HeartWood
April 04, 2018 · 4 views

Turning a pine bauble and painting it on the lathe.

 

Flatland Woodturners Presents Wooden Bell Christmas Ornament / Candle Snuffer
By: Flatland Woodturners
February 19, 2018 · 508 views

Flatland Woodturners member Curt Rush was first scheduled to demonstrate how to make a candle snuffer, but decided to add more to this demonstration and show how to make a wooden bell Christmas ornament that can easily be transformed into a candle snuffer. Visit us at http://www.flatlandwoodturners.com Facebook - http://www.facebook.com/flatlandwoodturners

 

Bird House Ornaments - (part 1)
By: Gwinnett Woodworkers
January 31, 2018 · 1,852 views

Bob Aldea demonstrates how he turns and colors the delicate bird house ornaments he is noted for. Demonstrated before a live audience on August 12, 2017 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Bird House Ornaments - (part 2)
By: Gwinnett Woodworkers
January 31, 2018 · 1,043 views

Bob Aldea demonstrates how he turns and colors the delicate bird house ornaments he is noted for. Demonstrated before a live audience on August 12, 2017 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

2017 Christmas Ornament Challenge - Winners and Look Forward
By: As Wood Turns
January 16, 2018 · 1,725 views

http://www.AsWoodTurns.com Play List Links: -As Wood Turns - http://www.AsWoodTurns.com/Challenges/christmas-ornament-2017/ -YouTube playlist URL is: https://www.youtube.com/playlist?list PL4W9FE566kZhgEBc221DEItUlGCVWd_7x Links to individual videos: 2* Mauro Migone https://youtu.be/skcRrmAqjYE 3* Patrick Laperrière ( Pat Lap ) https://youtu.be/PCIeNlTBG-c 4* Billy Burt https://youtu.be/tSbEiPYrDu4 5* Steve Krumanaker https://youtu.be/aRHXmuVY_5s 6* Mauro Migone https://youtu.be/aV3XUziCjkE 7 Thijs Gijbels https://youtu.be/4TlK9ebch7U 8* Walt Wager https://youtu.be/LqolCLsHIWg 9 Ken Moon ht

 

Figured Maple and Walnut Decoration Easy Woodturning Project
By: Turning With George
January 14, 2018 · 44 views

How to make a multi-coloured hanging decoration from walnut and curly maple. The finish is beeswax, Kit used http://www.axminster.co.uk/craftprokits-seasonal-tree-decoration-ax861988 Music: https://www.bensound.com/royalty-free-music/track/memories

 

David Lutrick Part 1
By: Olympic Peninsula Woodturners
December 26, 2017 · 115 views

David Lutrick demonstrated making wood turned Christmas ornaments from sea urchin shells at our September 2017 meeting. Part 1 of 3.

 

Spanbäumchen
By: Thomas Haeckel
December 25, 2017 · 3,913 views

Drechseln eines Spanbäumchens

 

David Lutrick Part 2
By: Olympic Peninsula Woodturners
December 25, 2017 · 96 views

David Lutrick demonstrated making wood turned Christmas ornaments from sea urchin shells at our September 2017 meeting. Part 2 of 3.

 

David Lutrick Part 3
By: Olympic Peninsula Woodturners
December 24, 2017 · 109 views

David Lutrick demonstrated making wood turned Christmas ornaments from sea urchin shells at our September 2017 meeting. Part 3 of 3.

 

Christmas Ornament Challenge 2017 [no music] - Aaron
By: Make Crazydays
December 23, 2017 · 212 views

Playlist: https://www.youtube.com/watch?v -R0Z_-Ivy08&list PL4W9FE566kZhgEBc221DEItUlGCVWd_7x Homepage: http://make.crazydays.org Shop: https://make.crazydays.org/shop/ Instagram: https://www.instagram.com/makecrazydays

 

#39 A Pair of Owls
By: Andrew Whale
December 21, 2017 · 3,891 views

This project was inspired by Martin Saban-Smith. He made some fantastic looking Owls, so I thought I would give it a try. To prepare the area for the eyes, I also had to make a doughnut chuck. The link to Martin's original video is: https://www.youtube.com/watch?v FCknDGGZMSE&t 10s Sam Angelo also had a great tip for making more accurate spheres, which I adopted. The link to his video is at: https://www.youtube.com/watch?v 4HvT_ub8alo I think the Intrinsic Colours are great. For more info on these, check out: http://www.msabansmith.com/2017/02/intrinsic-colour-collection If you are also int

 

Woodturning a Segmented Christmas Decoration - Perfect Sphere
By: Nathan Cumming
December 19, 2017 · 799 views

In this video I use the scrap left over from my segmented vase to segment and turn a Christmas decoration. The purpose of this it to have a try at turning a perfect sphere without using a sphere turning jig. I hope you enjoy the video. Feel free to subscribe if you haven't already. Many thanks to my current Subscribers. MUSIC CREDITED TO: We Are One by Vexento https://www.youtube.com/user/Vexento https://soundcloud.com/vexento Music promoted by Audio Library https://youtu.be/Ssvu2yncgWU Live The Life (Original Mix) by Edwin Ajtún https://soundcloud.com/edwin_ajtun Creative Commons — Attri

 

Wood Turned Carrying Bin
By: frank howarth
December 18, 2017 · 134,779 views

I have made a wood turned tool carrying bin. I made this by slicing a wooden bowl in half and adding a divider, then slicing it in half again 90゚ to the first cut and adding a second divider. I then turned the bowl and made outside flush, finally adding a handle to one of the dividers. The dividers and the bowl are from the same maple tree. I'm not entirely sure what the best function is for this but I really like how it turned out Some of the tools used in this project wood turning tools: http://carterandsontoolworks.com/ Cantilever Clamps: http://amzn.to/1TJmAFx Milwaukee Small Angle Grin

 

Woodturning Multi Axis Christmas Gift
By: As Wood Turns
December 15, 2017 · 1,717 views

http://www.AsWoodTurns.com I asked my wife for a Christmas project. Her response was to turn a lid for fancy glass jar for a Christmas gift. The jar could contain candy, goodies or many other thoughtful items. That was a good idea. But why not take it to the next level and decorate the lid with multi-axis features to provide more interest than only beautiful wood. The wood is walnut finished with lacquer. Size depends on the jar and imagination. Videos: Woodturning Christmas Ornament Using Infinite Axis Chuck https://youtu.be/4myBBLlPqe0 Woodturning Jewelry With Infinite Axis Chuck https

 

I am going to call him 'Fred'
By: Rich McNatt
December 15, 2017 · 412 views

The making of a 13' wooden snowman Holly Denney www.hollydenney.com

 

12 Days of Christmas-All Days
By: woodturningwithtim1
December 13, 2017 · 3,471 views

Compilation of all 12 days of Christmas (Don't try this at home!) You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. Music: 12 Days of Christmas (Instrumental) - Jingle Punks https://youtu.be/JYgZ_S8c-1Q

 

12 Days of Christmas-Twelfth Day
By: woodturningwithtim1
December 12, 2017 · 3,194 views

Fruitcake (Don't try this at home!) Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. Music: 12 Days of Christmas (Instrumental) - Jingle Punks https://youtu.be/JYgZ_S8c-1Q

 

12 Days of Christmas-Eleventh Day
By: woodturningwithtim1
December 11, 2017 · 3,009 views

Elf (Don't try this at home!) Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. Music: 12 Days of Christmas (Instrumental) - Jingle Punks https://youtu.be/JYgZ_S8c-1Q

 

Spalted Oak Ornament
By: Peaceful Woodturner
December 11, 2017 · 30 views

A Christmas ornament made from some nice spalted oak. Ornaments are proving to be a good way for me to practice.

 

How to Make a Wooden Christmas Ornament Beginner Woodturning Projects Day 6
By: Fix This Build That
December 11, 2017 · 36,010 views

How to make a wooden christmas ornament on the wood lathe. I used some claro walnut and just a few lathe accessories to make this beautiful xman ornament. You can make your own for gifts, craft fairs, or your own christmas tree. This is the 6th and final day of my 6 Days of Beginner Woodturning Projects. If you’ve wanted to add lathe work into your woodworking this is a great place to start. I’ll share some basics and what I learned turning each project. 6 Days of Beginner Woodturning Playlist: https://www.youtube.com/playlist?list PLLkAgl7_UY3WsfOU0_dt--44cgRvslfhP BLOG: http://fixthisbu

 

12 Days of Christmas-Tenth Day
By: woodturningwithtim1
December 10, 2017 · 3,555 views

8000 strands of tinsel (Don't try this at home!) Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. Music: 12 Days of Christmas (Instrumental) - Jingle Punks https://youtu.be/JYgZ_S8c-1Q

 

Hand Turned ornaments 2017
By: Dry Creek Woodturning
December 10, 2017 · 324 views

This years version

 

12 Days of Christmas-Ninth Day
By: woodturningwithtim1
December 09, 2017 · 3,685 views

Box of ornaments (Don't try this at home!) Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. Music: 12 Days of Christmas (Instrumental) - Jingle Punks https://youtu.be/JYgZ_S8c-1Q

 

12 Days of Christmas-Eighth Day
By: woodturningwithtim1
December 08, 2017 · 2,748 views

Box of Candy Canes (Don't try this at home!) Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. Music: 12 Days of Christmas (Instrumental) - Jingle Punks https://youtu.be/JYgZ_S8c-1Q

 

12 Days of Christmas-Seventh Day
By: woodturningwithtim1
December 07, 2017 · 3,252 views

Bag of fake snow (Don't try this at home!) Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. Music: 12 Days of Christmas (Instrumental) - Jingle Punks https://youtu.be/JYgZ_S8c-1Q

 

Christmas Ornament Challenge Viewers Vote For Favorites
By: As Wood Turns
December 07, 2017 · 3,112 views

Christmas Ornament Challenge - Viewers Vote For Favorites https://youtu.be/PNArSsIPqo0 http://www.youtube.com/watch?v PNArSsIPqo0 http://www.aswoodturns.com/2017/11/2017-ornament-update3/ http://www.AsWoodTurns.com Now is your chance to vote for your favorites. Voting Instructions: 1. View the videos submitted and pick five favorites. 2. Rank your pics from 1 to 5 3. Enter your pics in one comment below this video. 4. Please do NOT enter votes in individual video comments - only in comments for this video. You can express any other comments in any inividual video. Give them a 'thumbs up

 

Wood Turned Peppermint Christmas Ornament
By: frank howarth
December 07, 2017 · 404,595 views

This year's Christmas ornament is inspired by a peppermint candy. It is a twisted striped segmented woodturned sphere. To make the ornament, I made a tall cylinder of thin segments of alternating padauk and maple wood. Next, I sliced this cylinder into sections and glued the sections back together with a twist in the pattern of alternating woods. Then I wood turned this cylinder into a sphere and made the ornament. Some of the tools used in this project CNC: http://www.cncrouterparts.com wood turning tools: http://carterandsontoolworks.com/ eye hooks: http://www.winkshardware.com/ Cantileve

 

12 Day of Christmas-Sixth Day
By: woodturningwithtim1
December 06, 2017 · 4,595 views

Lump of coal (Don't try this at home!) Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. Music: 12 Days of Christmas (Instrumental) - Jingle Punks https://youtu.be/JYgZ_S8c-1Q

 

12 Days of Christmas-Fifth Day
By: woodturningwithtim1
December 05, 2017 · 3,553 views

Really annoying reindeer (Don't try this at home!) Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. Music: 12 Days of Christmas (Instrumental) - Jingle Punks https://youtu.be/JYgZ_S8c-1Q

 

Oak Bird House Ornament
By: Peaceful Woodturner
December 05, 2017 · 29 views

I made a simple bird house ornament. The final piece is only a few inches tall. This was a good project for me to practice my skew skills. All my videos are me sharing my journey as I learn this art form. I am a student, not a teacher and in no way an expert. Please take time to read, learn, and study so that you can be safe! Use and wear all appropriate safety equipment including head protection, face shield, and respiratory protection. Thank you for joining me on this journey!

 

12 Days of Christmas-Fourth Day
By: woodturningwithtim1
December 04, 2017 · 3,311 views

Christmas Cards (Don't try this at home!) Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. Music: 12 Days of Christmas (Instrumental) - Jingle Punks https://youtu.be/JYgZ_S8c-1Q

 

12 Days of Christmas-Third Day
By: woodturningwithtim1
December 03, 2017 · 3,894 views

Three morning doves (Don't try this at home!) Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. Music: 12 Days of Christmas (Instrumental) - Jingle Punks https://youtu.be/JYgZ_S8c-1Q

 

Christmas bell
By: SCCFORUM
December 03, 2017 · 151 views

Opticast 100 resin. Red, Blue and White tinsel. I sprayed the brass tube White. The bell is just one of the cheap kits.

 

How To Make Christmas Ornaments - SE Woodwork
By: Sean Evelegh
December 03, 2017 · 1,182 views

I going to make as many Christmas Ornaments as I can from one Banksia pods. I will be turning a Christmas Tree, a Bell, Giant Snowflakes and a Half Lap wooden Sphere. If you don’t have a lot of time or want inspiration for making Christmas ornaments well this is the perfect video for you! If you'd like to support me, please check out my patreon page; https://www.patreon.com/sewoodwork If you like what I do, then please share this video with your friends, subscribe so that you don't miss another video and please like the video. If you have anything to say (question) then feel free to comment

 

12 Days of Christmas-Second Day
By: woodturningwithtim1
December 02, 2017 · 5,031 views

String of really ugly Christmas lights (Don't try this at home!) Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. Music: 12 Days of Christmas (Instrumental) - Jingle Punks https://youtu.be/JYgZ_S8c-1Q

 

12 days of Christmas-First Day
By: woodturningwithtim1
December 01, 2017 · 5,922 views

Crappy Christmas Tree (Don't try this at home!) Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS. Music: 12 Days of Christmas (Instrumental) - Jingle Punks https://youtu.be/JYgZ_S8c-1Q

 

Woodturning Laminated Christmas Ornament
By: As Wood Turns
December 01, 2017 · 3,602 views

http://www.AsWoodTurns.com While wrapping up this year's Christmas Ornament Challenge, I wanted to make one more Christmas ornament. For this ornament, I used left over laminations from a rolling pin projects and oriented the layers on a diagonal. After rounding, I cut the ornament in half to make hollowing easy, then glued it back together with a walnut slice in between. To finish the ornament, I had to turn bushings from HDPE for my pen mandrel. The finials are turned from a tropical pen blank. The Christmas ornament is finished with brushing lacquer and buffed. It is 3.5' by 7.5' Useful Link: Easy DIY Tenon Cutters for Woodturning https://youtu.be/C4gO1jA2d0g Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Traumerei by Shumann performed by Becky Schlappi. Used by permission.

 

THE CHRISTMAS TINSEL PROJECT!
By: Nick Zammeti
December 01, 2017 · 117,948 views

I made a Christmas tinsel shard using epoxy resin and Christmas tinsel. MAKERS CENTRAL WEBSITE http://www.makerscentral.co.uk/ MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ Alexandra Climent https://www.instagram.com/alexandracliment/ VON HANK BRANDING IRON https://www.etsy.com/uk/shop/vonHanke TRITON TOOLS http://www.tritontools.com/en-GB RECORD POWER http://www.recordpower.co.uk/ MY WEBSITE http://www.nzwoodturning.co.uk/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com

 

2017 Christmas Ornament Challenge Wood Turing and Resign Casting
By: Turning Round
November 30, 2017 · 713 views

Carl Jacobson and Alan Stratton put on a Christmas Ornament Challenge each year. This is my attempt this year I once again combined Wood Turning and resin Casting and Sea Shell into an Ornament. I learned a lot and had a ton of fun, let's just say maybe next year I will have a shot at the big leagues. But seriously Thanks for putting on the Challenge. I love doing this stuff and sharing what I learn and the fun stuff I make. I will be making a more details and more wood turning learning videos available. If you want to support me on Pateron or my website you will have access to detailed

 

Birdcage Ornament
By: Derek Oliver
November 29, 2017 · 1,039 views

A bird cage ornament made from oak, cedar, and poplar dowels.

 

Laminated and Layered - 2017 Christmas Ornament Challenge
By: Jason Mickley
November 29, 2017 · 215 views

This is my first time filming myself in the shop. My recording equipment consists of only my cell phone. Coupled with my inexperience in filming and video editing the video is not up to the standard I would like it to be but I needed to get the video uploaded before the deadline. I have watched the annual Christmas ornament challenge pass by the last few years and have regretted not submitting something. I am hoping to have better recording equipment in the near future. Thank you for your patience. I intend to make higher quality videos in the future! The ornament is made up of maple, paduak,

 

Christmas Ornament Challenge 2017 - Elizabeth
By: Make Crazydays
November 28, 2017 · 1,437 views

This is Elizabeth Day’s entry into the 2017 Christmas Ornament Challenge. The playlist for the challenge can be found at http://www.youtube.com/watch?v -R0Z_-Ivy08&list PL4W9FE566kZhgEBc221DEItUlGCVWd_7x Homepage: http://make.crazydays.org Shop: https://make.crazydays.org/shop/ Instagram: https://www.instagram.com/makecrazydays

 

Found Pine Christmas Ornament
By: Peaceful Woodturner
November 28, 2017 · 19 views

A more elaborate ornament from a piece of pine I found in the woods. Another piece for really good skew practice. All my videos are me sharing my journey as I learn this art form. I am a student, not a teacher and in no way an expert. Please take time to read, learn, and study so that you can be safe! Use and wear all appropriate safety equipment including head protection, face shield, and respiratory protection. Thank you for joining me on this journey!

 

Pine Ornament Christmas 2017
By: Peaceful Woodturner
November 28, 2017 · 98 views

A simple little ornament from a piece of pine found in the woods. Some good skew practice and a nice end result. All my videos are me sharing my journey as I learn this art form. I am a student, not a teacher and in no way an expert. Please take time to read, learn, and study so that you can be safe! Use and wear all appropriate safety equipment including head protection, face shield, and respiratory protection. Thank you for joining me on this journey!

 

Segmented Kyle Toth Inspired Christmas Ornament
By: The Russian Woodworker
November 28, 2017 · 701 views

In this video I make a Christmas Ornament for the annual 2017 Christmas ornament challenge hosted by Carl Jacobson and Allan Stratton. Carl: https://www.youtube.com/user/haydenHD Allan: https://www.youtube.com/user/AsWoodTurns And I made this using a strategy of using a thin layer of veneer from Kyle Toth. Kyle: https://www.youtube.com/user/HomedepotKt

 

My 2017 Christmas Challenge
By: Knottie_gurl Deanna Morris
November 28, 2017 · 96 views

A hybrid twig pot and tea light I'm sorry for the bad text. This is my first video of this sort, and I'm still learning.

 

4 styles of 5, 10 & 20 Holiday Ornaments - Art/Farmers Market Projects
By: wortheffort
November 27, 2017 · 27,708 views

The holidays are here. Time to batch out family/office gifts or impulse buys for the markets. In this video we make 4 styles of ornaments utilizing the lathe, finials, sea urchins and the CNC. Lots of tool usage, design and production tips throughout. --------------------------------------------------------------------- Introduction - 00:00 CNC setup - 03:40 Material, Tools & Setup - 05:15 Sharpening - 13:00 Finial Techniques - 16:00 Finial Design - 19:00 Sharpening Gouges - 24:15 Cutting Angles - 29:45 Turning Techniques - 35:30 Processing Urchins - 44:30 Production Montage - 47:15 Sputnick U

 

Woodturning Making some Cristmas decorations
By: Rebel Turner
November 26, 2017 · 9,825 views

I made an Angel and Collin joined me to make a snowman fun and quick.

 

2017 ornament challenge #2 segmented.
By: Eli Polite
November 26, 2017 · 391 views

There are a total of 3 videos for this ornament on my Chanel check them out subscribe and comment

 

#91 2017 Christmas Ornament Challenge
By: Yuval Lahav Woodturning
November 25, 2017 · 44,871 views

This is my entry to Carl Jacobson and Alan Stratton's 2017 Christmas ornament challenge. This project (and video) were inspired by the work of Malcolm Tibbetts, you can find his excellent video, 'The Power of Seven', here: https://www.youtube.com/watch?v V1viPrqDxpo Patreon: https://www.patreon.com/YuvalLahav Twitter: https://twitter.com/YL_Woodturning Instagram: https://www.instagram.com/yuval_lahav_woodturning/ Facebook: https://www.facebook.com/yuval.lahav.16 Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Reddit: https://www.r

 

Woodturning Christmas Ornament Using Infinite Axis Chuck
By: As Wood Turns
November 25, 2017 · 2,555 views

http://www.AsWoodTurns.com For this project, I decided to do something different. Instead of a hollow globe with finials, I decided to substitute a disk for the globe and place decorative elements on the sides. The Infinite Axis Chuck is perfect for turning the decorative elements. My ornament is about 7 inches tall and 3 inches across the disk and finished with brushing lacquer. My process (as modified for next time): 1. Saw parallel cuts on the top and bottom of the wood for the disk. 2. Mark line through centers of top, front, and bottom. 3. Drill mortise hole in top and bottom. Depth is

 

Woodturning a Christmas napkin ring #Christmas Ornament Challenge 2017
By: Kostas Annikas Deftereos
November 25, 2017 · 2,253 views

This is my entry to Christmas Ornament Challenge 2017 ! i try to make something easy to anyone and very usefull ! i hope you like it !!! happy holidays to everyone !!! here is the links for the challenge and the people that enter it !! Alan : https://www.youtube.com/channel/UCucYlCYbbf1ZDGO-7OjKl5w http://www.AsWoodTurns.com Carl : https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg http://www.TheWoodShop.tv and the links for the channel list with so many beautifull creations https://www.youtube.com/playlist?list PL4W9FE566kZhgEBc221DEItUlGCVWd_7x

 

Christmas Ornament Challange 2017
By: Northern Woods Turning
November 25, 2017 · 210 views

Martin Young - Northern Woods Turning This ornament is made from Ash with resin stripes.

 

2 of 2 finishing work on my segmented, inlayed Christmas ornament
By: Eli Polite
November 25, 2017 · 202 views

I’m covering the sanding and buffing process for my finish work. This should add to my 2017 Christmas ornament challenge. This ornament is segmented and inlayed

 

2017 Christmas Ornament Challenge Update #2
By: As Wood Turns
November 24, 2017 · 1,621 views

http://www.AsWoodTurns.com This is the second update to the Sixth Annual Christmas Ornament Challenge to show all the ornament and videos submitted to date. Links to these videos: All videos are in a playlist at https://www.youtube.com/playlist?list PL4W9FE566kZhgEBc221DEItUlGCVWd_7x or 2 Mauro Migone https://youtu.be/skcRrmAqjYE 3 Patrick Laperrière ( Pat Lap ) https://youtu.be/PCIeNlTBG-c 4 Billy Burt https://youtu.be/tSbEiPYrDu4 5 Steve Krumanaker https://youtu.be/aRHXmuVY_5s 6 Mauro Migone https://youtu.be/aV3XUziCjkE 7 Thijs Gijbels https://youtu.be/4TlK9ebch7U 8 Walt Wager https://you

 

Ornament Challenge 2017
By: Jtcturning
November 24, 2017 · 6,194 views

Ironic Ornament - Star of David Christmas Ornament Made from Redheart and Holly with a copper wire eyelet.

 

turning a xmas Baubles
By: Gemma Phillips
November 24, 2017 · 10 views

 

Christmas Ornament Challenge 2017
By: Jeremy Edwards
November 20, 2017 · 5,489 views

My 2017 Christmas Ornament Challenge is made from REAL Skateboard, a skateboard bearing, Walnut and Ebony. It is an Inside-out, inside of an Inside-out. The inside inside out spins on a skateboard bearing. Merry Christmas everyone. Don't forget the reason for the season. The Birth of our Savior Jesus Christ.

 

Christmas ornament Pre finish work. Segmented wood turning
By: Eli Polite
November 20, 2017 · 243 views

This is part 1of 2 showing all the pre finish work on the ornament sphere. I will have more videos that focus on the inlay construction soon. I’m still figuring this video thing out so stay tuned they will get better

 

Christmas Ornament Challenge Part 1
By: Sears Woodturning
November 19, 2017 · 126 views

Carl Jacobson Challenge

 

Christmas Decoration Inside Out Turning
By: Turntastic Wood Designs
November 18, 2017 · 2,307 views

A fun Christmas Decoration using the inside-out turning method,

 

Making a hollow Christmas ornament
By: Made by Brent
November 18, 2017 · 322 views

This is a video on how I make hollow ornaments. I made this for the christmas ornament challenge put on by Alan Stratton and Carl Jacobson.

 

Christmas Ornament Challenge part 2
By: Sears Woodturning
November 18, 2017 · 18 views

Carl Jacobson Ornament Challenge

 

Christmas ornament Challenge Part 3 Hat
By: Sears Woodturning
November 18, 2017 · 17 views

Carl Jacobson Ornament Challenge

 

Woodturning Inside Out Open End Christmas Ornament With LED
By: As Wood Turns
November 17, 2017 · 5,308 views

http://www.AsWoodTurns.com Inside out Christmas ornaments are a challenge for me. The profile of the inside turning is difficult to visualize. The turning often results in thin sections with fragile short grain. The resulting slats are wickedly knife sharp. Yet, these ornaments are a great project with a fantastic unique look. After a recent article in American Woodturner, I decided to try an inside out turning with an open end. It should not be that hard can it be? Well, to complicate things, I incorporated a battery operated LED tea light into the inside. My design concept was to insert th

 

woodturning and lightbulb ornament
By: Joshua Solomon The Woodgrain Ninja
November 17, 2017 · 114 views

An idea that i wanted to try out. I had to do more than one lightbulb due to cracking so if i do another ornament this style i may use something else instead. will put more effort into the next one.

 

2017 Ornament Challenge Entry 2
By: Billy Burt
November 17, 2017 · 727 views

This is my second entry for Alan's and Carl's annual ornament challenge. This is how I turn a Christmas tree ornament. I believe the wood to be Cottonwood. The ornament stands just over 6' tall.

 

Eli’s 2017 Christmas ornament challenge segmented wood turning
By: Eli Polite
November 12, 2017 · 1,230 views

Wood turning a Christmas ornament. Segmented turning, inlay turning.

 

How to Make a Segmented Hot Air Balloon
By: Moonpie Creations
November 10, 2017 · 269 views

So in this video I make my grandson a special present. It started off as a Christmas ornament, then turned into a decorative ball and ended up being a hot air balloon. I segmented some maple and walnut, glued them together and made what I think is a very nice decorative figure. I hope you enjoy and if you do please share the video and hit the like button while you are at it.

 

Eccentric Christmas Tree Ornament – Wood Turning
By: Mike Peace Woodturning
November 10, 2017 · 6,724 views

I demonstrate another approach to making a Christmas Tree ornament that involves changing the axis of the tree and cuting Vee grooves with a skew. It is easier than it sounds if you are worried about using a skew. I upload a new wood turning tip every Tuesday and a wood turning tutorial video each and every Friday so Ya’ll come back, hear? Want to support my channel? Check out my Amazon shop https://www.amazon.com/shop/mikepeacewoodturning Disclaimer: If you click on one of the product links, I’ll receive a small commission. This helps support my channel and allows me to continue to make videos like this. Thank you for the support! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Turning a Christmas Ornament Kit Woodturning How-to
By: Craft Supplies USA
November 10, 2017 · 10,087 views

Learn how to turn a Snowman's Top Hat Christmas Tree Ornament Project Kit today!! Shop now: https://www.woodturnerscatalog.com/t/62/Ornaments?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe: https://www.youtube.com/user/CraftSuppliesUSA?sub_confirmation 1 For more information, view our companion article on our blog: http://blog.woodturnerscatalog.com/2017/12/turning-top-hat-christmas-tree-ornament/ Product description - The Top Hat ornament kit is plated with rich 10k gold or chrome to produce a holiday glow on your Christmas Tree. This kit uses a single tub

 

2017 Christmas Ornament Challenge Update #1
By: As Wood Turns
November 10, 2017 · 1,662 views

http://www.AsWoodTurns.com This is the first update to the Sixth Annual Christmas Ornament Challenge to show all the ornament and videos submitted to date. Links to these videos: All videos are in a playlist at https://www.youtube.com/playlist?list PL4W9FE566kZhgEBc221DEItUlGCVWd_7x or 2 Mauro Migone https://youtu.be/skcRrmAqjYE 3 Patrick Laperrière ( Pat Lap ) https://youtu.be/PCIeNlTBG-c 4 Billy Burt https://youtu.be/tSbEiPYrDu4 5 Steve Krumanaker https://youtu.be/aRHXmuVY_5s 6 Mauro Migone https://youtu.be/aV3XUziCjkE 7 Thijs Gijbels https://youtu.be/4TlK9ebch7U 8 Walt Wager https://yout

 

Wood Turning Christmas Ornaments
By: Joe Pierce
November 08, 2017 · 987 views

This is my entry to the 2017 Christmas Ornament Challenge. For more information on the Challenge, visit: http://www.aswoodturns.com/Challenges/ Also Check out https://www.youtube.com/user/AsWoodTurns and https://www.youtube.com/user/haydenHD Visit my website at http://www.joepiercemaker.com

 

Wood Turning - My Christmas Ornament Challenge Entry
By: Mike Waldt
November 07, 2017 · 7,413 views

My entry for the Christmas Ornament Challenge, organised by Carl Jacobson and Alan Stratton, thanks both :) Carl's Channel: https://www.youtube.com/user/haydenHD Alan's Channel: https://www.youtube.com/user/AsWoodTurns Nick Bowers: https://www.youtube.com/channel/UCAkpK8-LiVla53eSC3NjoIg Harrogate Show Website: http://www.skpromotions.co.uk/ Yorkshire Grit: http://yorkshire-grit.com/ Hampshire Sheen: http://www.hampshiresheen.com/ Simon Hope: http://www.hopewoodturning.co.uk/ Makers Central YouTube Channel: https://www.youtube.com/channel/UCJSr... Makers Central website: http://www.makerscentral.co.uk/ NZ Woodturning: https://www.youtube.com/channel/UC3-0...

 

Christmas Decorations on the Lathe
By: DentonTurners
November 07, 2017 · 12,631 views

Sammy Thomason returns and shows us some ideas for making Christmas decorations on the lathe. He makes Christmas trees, Angels, and talks about tips and methods for making inside-out ornaments. Enjoy!! This was recorded at the monthly meeting of the Golden Triangle Woodturners in Denton, Texas. We meet monthly 7pm the first Monday of each month in the Center for the Visual Arts, located at the corner of Hickory and Belle Streets in Denton. All are welcome!! http://www.goldentrianglewoodturners.org

 

4 Easy To Make Christmas Decorations
By: Axminster Tools & Machinery
November 03, 2017 · 11,829 views

Making for Christmas is a great way to make your Christmas a little bit more special. Watch Colwin turn four easy to make wooden Christmas decorations and learn how to turn some treasures of your own! Not only will they make the perfect gifts for loved ones, they will also make a joyous addition to your tree decorations. ---------------------------------------------------------------------------------------------- SHOP - http://www.axminster.co.uk BLOG - http://knowledge.axminster.co.uk/ FACEBOOK - https://www.facebook.com/axminstertoolcentre EBAY STORE - http://stores.ebay.co.uk/axminstertoolcentre CALL (UK) - 0800 371822

 

Woodturning a hollow spiral globe ornament
By: Walter Wager
November 02, 2017 · 516,459 views

Video shows how to use the Merlin 2 to make a hollow spiral globe ornament

 

Making an Acorn Box Christmas Ornament
By: Le PicBois
November 01, 2017 · 4,508 views

I made this acorn box for the 2017 Christmas Ornament Challenge Hosted by Carl Jacobson & Alan Stratton: http://www.aswoodturns.com/Challenges/ • Carl's Channel: https://www.youtube.com/user/haydenHD • Alan's Channel: https://www.youtube.com/user/AsWoodTurns • Challenge Playlist: https://www.youtube.com/watch?v -R0Z_-Ivy08&list PL4W9FE566kZhgEBc221DEItUlGCVWd_7x _________________________________________ Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Insta

 

2017 Ornament Challenge Entry
By: Billy Burt
October 25, 2017 · 1,358 views

This is my entry to Alan Stratton and Carl Jacobson's 2017 Christmas Ornament Challenge. The body is Ash Juniper (aka Mountain Cedar in central Texas), the wings are Red Oak and the clangor is Mesquite.

 

Christmas Ornament Dimensions
By: RickTurns
October 24, 2017 · 1,458 views

I've had a few requests for the dimensions of some of the Christmas ornaments that I have turned. This videos gives the dimensions of my flying saucer ornament, lighthouse ornament, and bell ornament. The music during the close of the video, Happy Little Elves by Audionautix, is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com

 

Turning a Birdhouse Ornament with Mike Short
By: Show Me Woodturners
October 22, 2017 · 415 views

Turning a birdhouse ornament.

 

Christmas Ornament 2017
By: Mauro il tornitore
October 19, 2017 · 1,254 views

My entry for the 2017 Christmas Ornament Challenge.

 

2017 Christmas Ornament Challenge
By: As Wood Turns
October 19, 2017 · 3,592 views

http://www.AsWoodTurns.com We're announcing the Sixth Annual Christmas Ornament Challenge. The challenge is open to all crafts, all materials, collaborations, mixed media, whatever. To enter, video you making your ornament and upload it to your YouTube channel. Then at http://www.AsWoodTurns.com/Challenges, complete the form. But sure you get a successful confirmation message. The challenge ends midhight November 30, 2017 We'll announce winners in December. Again. the challenge is open to ornaments from all crafts and combination of crafts. Alan's Website: http://www.AsWoodTurns.com Carl's Website http://www.TheWoodShop.tv Where to submit video: http://www.AsWoodTurns.com/Challenges

 

Trædrejning, Mejsel arbejde - Woodturning, Skew work
By: Rasmus Petersen
October 12, 2017 · 3,849 views

Julen nærmer sig.. der produceres juletræer i det lille værksted. Christmas i comming, christmas trees, all skew work all the day :D

 

Designing Two Stave Inside Out Christmas Ornament
By: As Wood Turns
September 15, 2017 · 4,099 views

http://www.AsWoodTurns.com Inside out Christmas ornaments present a challenge for me. They are tough to visualize due to the interaction of the inside and the outside turning. For this two stave inside out ornament, I started to plan the woodturning using Sketchup. Sketchup is a three dimensional modeling application. I use the free non pro version. While I can draw a round object with curves, it would be difficult to edit. To avoid this difficulty, I approximated the shape by using 1/4' steps, planning to smooth out the final ornament. Since this ornament uses two staves, I first drew one

 

The making of an acorn ornament
By: Mike Smith
September 03, 2017 · 27 views

This video is about Making an acorn ornament. There are other methods but this is how I as a visually impaired turner goes about achieving it.

 

Inside Out Christmas Ornament - The Basics
By: As Wood Turns
August 11, 2017 · 11,980 views

http://www.AsWoodTurns.com It's time to start planning for Christmas ornaments and the 2017 Christmas Ornament Challenge. To get ready, I'm turning an inside out ornament whose body is maple in this video. In the next video, I'll turn finials and the central display. My original plan was for a Christmas Tree to be in the center. But after turning the globe portion and looking at it upside down, it looks like it could be perfect for a Christmas Bell ornament. I'll have to decide soon. The ornament body is made from four pieces of 1.5' x 1.5' x 10' maple. The process: 1. Prepare the staves.

 

Scrapped 'A-Symmetric Ornament'
By: Sattva Woodworks
July 24, 2017 · 94 views

Scrapped is a series I will be creating. It is based in cut offs that many people discard. This piece is just the beginning.I hope to explore different avenues with this same thought. Its a shame to waste wood or any natural resource at any size. Thoughtfully wanting to present that through turning various woodworking projects in the future posts. Thanks to music from: http://freemusicarchive.org/music/Coconut_Monkeyrocket/Comfort_Cake/csr048_comfort-cake_slice-2_02_coconut-monkeyrocket_accidental-beatnik Creative license: https://creativecommons.org/licenses/by-nc/4.0

 

Wood & Resin Disc
By: SCCFORUM
April 17, 2017 · 348 views

Hi All, This was a nice project to do. I ended up sticking it on the door but I could of drilled a hole in it and turned it into a pendant. Or drill a couple of holes in the middle and turn it into a very large button. :-)) I got the Idea from watching a video from Pam at Highland Boxes. https://www.youtube.com/channel/UCkg4kARmfFOfrlWDGUHzHqQ Cheers Paul

 

Turning a Cardinal Part 2
By: Derek Weidman
April 14, 2017 · 743 views

http://derekweidman.com/ Final touches on the cardinal project. Filmed by Nicholas La Due Photography www.NicholasLaDuePhoto.com

 

Turning a Cardinal Part 1
By: Derek Weidman
April 13, 2017 · 1,141 views

http://derekweidman.com/ The begining process of sculpting a cardinal on a lathe by Derek Weidman Filmed by Nicholas La Due Photography www.NicholasLaDuePhoto.com

 

Ornaments Pt 2 Turn sound down!!
By: Dry Creek Woodturning
April 09, 2017 · 61 views

This is a short production run of ornaments, unedited and sped up. It's long but you get the idea

 

Ornament Part 1 one off
By: Dry Creek Woodturning
April 03, 2017 · 73 views

Though this is not how I do ornaments normally, this shows all the steps

 

Woodturning Ornaments 2016
By: Dry Creek Woodturning
March 30, 2017 · 80 views

Hand turned and dyed ornaments from curly maple. Please like and subscribe.

 

Christmas Ornament Challenge Results 2016
By: As Wood Turns
December 27, 2016 · 3,001 views

Announcing the winners from the 2016 Christmas Ornament Challenge. The Challenge Playlist via AsWoodTurns: http://www.aswoodturns.com/challenges/christmas-ornament-2016/ The Challenge Playlist via YouTube: https://www.youtube.com/playlist?list PL4W9FE566kZhAdzbt9715eEOupHJXXjwg Thanks to each craftsperson who submitted their ornament and video. Thanks to sponsors for providing wonderful prizes. Thanks to each viewer who nominated their choices in the Viewer's Choice. Thanks to everyone else who viewed and appreciated the creativity and effort that went into these ornaments. Thanks to Carl Jacobson for co-hosting the challenge. http://www.AsWoodTurns.com Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

FOR CHRISTMAS/ THE BILLIARD BALL PROJECT!
By: Nick Zammeti
December 25, 2016 · 249,397 views

MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ SEND ME STUFF FAO NICK NZ WOODTURNING PO Box 363 ROMSEY SO51 1DY UNITED KINGDOM SUBSCRIBE TO ME ON YOUTUBE HERE https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA FOLLOW ME ON TWITTER https://twitter.com/NZWoodturning PLEASE LIKE MY FACEBOOK PAGE https://www.facebook.com/nzwoodturning/ INSTERGRAM https://www.instagram.com/nickzammeti/?hl en MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ YORKSHIRE GRIT http://yorkshire-grit.com/ CHECK OUT MY VLOGGING CHANNEL. https://www.youtube.com/channel/UCAQsI9pUgViHsOOya-J3sTQ CHECK OUT MY GIVEAWAY CHANNEL https://www.youtube.com/channel/UCb4AtBzCeVzGEEbM_4394dA

 

Twas the Night before Christmas, Willem's Woodnotes
By: Willem Kossen
December 24, 2016 · 207 views

It's Christmas Time. Christmas is a time of song and poetry. Rick Wilke challenged me on facebook to read the poem Twas the Night before Christmas. And here it is. I added a little Christmas Woodturning project as a backdrop, turning a little Christmas tree from Walnut. Im getting a lot more confident with the skew chisel lately. It's prominently featured in this project, as well is the large mortising chisel i've shown before, which i use for roughing out the blank. Links: Rick Wilke: https://www.facebook.com/wilkewoodshop Rick Wilke Channel: https://www.youtube.com/channel/UCgVpxu-zkc37MKz

 

Drechseln einer Weihnachtsglocke für den Weihnachtsbaum
By: Hobbydrechsler Thomas Pfahler
December 20, 2016 · 7,525 views

In diesem Video möchte ich euch zeigen wie ich eine kleine Weihnachtsglocke für den Weihnachtsbaum Drechsle. Wer mehr über meine Drechselsachen erfahren möchte ich habe auch eine Seite auf Facebook. Hier der Link: https://www.facebook.com/HobbydrechslerThomasPfahler

 

Christmas Bell Woodturning
By: Turn It Up
December 20, 2016 · 51 views

Turning and assembling a bell shaped Christmas ornament.

 

Woodturning a Santa Gift Sack Ornement (TURN 3 OF THE 12 TURNS OF CHRISTMAS)
By: Templeboy Turnings
December 18, 2016 · 1,383 views

In this episode of Templeboy turnings I continue with my challenge of THE 12 TURNS OF CHRISTMAS. Turn number 3 The Santa Gift Sack Ornament. Made from a single Beech wood log, a Poplar pen blank and a piece of Walnut. this ornament was a great challenge and required many different skill sets, from turning, skew work, carving and colour. Join me again soon for Turn number 4 of THE 12 TURNS OF CHRISTMAS !! Music :- http://www.bensound.com/royalty-free-music and YouTube Create library. Thanks for watching !! Please like, share and comment, and if you haven't already (why not ?? :-p) Please subscribe !! Follow me on facebook https://www.facebook.com/TempleboyTur... Follow me on Instagram https://www.instagram.com/templeboytu... Follow me on Twitter https://twitter.com/TempleboyTurnin Please support me on Patreon https://www.patreon.com/Templeboyturner My Webpage www.templeboyturnings.com Regards Steve. (AKA The Templeboy Turner)

 

17 - Saving a Special Christmas Ornament
By: Bill Rockwood
December 18, 2016 · 145 views

I turn a small base of Koa wood to save a cherished Christmas ornament.

 

Christmas Ornament Challenge Long Version 2016
By: Turning Round
December 17, 2016 · 258 views

In this wood turning video I do an inside out turning and glue up and a second wood turning, with a segmented turning. I use Alumilite Casting for the center around a Christmas Tree. This was a fun project but a long one with many steps. This is for the Carl Jacobsen and As Wood Turns Christmas Ornament Challenge 2016.

 

Jingle Bell - Ornament/Bottle Stopper
By: Maple-Crossing Woodworks
December 11, 2016 · 259 views

I couldn't decide if I wanted to make an ornament for my Christmas Tree, or another Bottle Stopper, so I decided not to decide. This was a fun project and something that can be used year round!

 

A Deer For Christmas - Episode 43
By: Paul Lockwood
December 10, 2016 · 910 views

Using some Oak cut to size on the band saw for the blanks. Most work was done with the skew where possible. Everything was given at least two coats of sanding sealer and all apart from the antlers got a coat of Bees Wax and Carnauba Wax. I hunted all over the web for any examples and could not find anything like this turned on the lathe. Music Wish Background Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0/ Please Subscribe http://www.youtube.com/channel/UCJmcpalJi_xzP_iV3uXJj2w?sub_confirmation 1

 

How to Turn a Christmas Tree Decoration
By: Mike Peace Woodturning
December 09, 2016 · 70,847 views

I demonstrate woodturning small Christmas trees suitable for Christmas tree ornaments or simply as table decorations. This is a fast, fun and easy wood lathe project! You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Viewers Choice Christmas Ornament Challenge 2016
By: As Wood Turns
December 09, 2016 · 3,694 views

http://www.AsWoodTurns.com What a fantastic challenge. This video shows all ornaments that were entered into the challenge. We invite you to vote for your favorites. This is an experiment - we hope it works. Here are the guidelines. 1. Review this video and the ornaments. These are in random order but the number in this video corresponds to order in the official playlist. Note which that you’d like to see the video for. 2. View the supporting videos from your list. The video should be part of your decision. 3. In a comment below this video, enter up to 5 numbers that represent your favorite

 

Woodturning Christmas Ornaments
By: Mike-N-Texas Woodturning
December 09, 2016 · 8,706 views

Mike Turns Wooden Christmas Ornaments

 

Drechseln eines Schneemanns
By: Hobbydrechsler Thomas Pfahler
December 07, 2016 · 4,139 views

In diesem Video möchte ich euch zeigen wie ich einen Schneemann aus Birke Drechsle. Wer mehr über meine Drechselsachen erfahren möchte ich habe auch eine Seite auf Facebook. Hier der Link: https://www.facebook.com/HobbydrechslerThomasPfahler

 

Новогодняя Игрушка!
By: The Russian Woodworker
December 03, 2016 · 242 views

 

Woodturning Project Airstream Bambi Ornament
By: Carl Jacobson
December 02, 2016 · 8,920 views

Bambi is the smallest of the Airstream trailers. I turned this ornament on the lathe, and used my segmenting sled to make the tongue part of the frame. I used Maple and Walnut it's 3 1/2' by 2' Live shows Monday,Wednesday,Friday https://www.twitch.tv/carljacobson Here's a link to some of the tools I use in my videos, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJa

 

WOODTURNING A CHRISTMAS DECORATION!
By: Nick Zammeti
December 02, 2016 · 9,110 views

So I decided to make a Christmas gift. it’s a Christmas decoration. Happy Christmas everyone. Here the details on UKIWS if you wanted to attend. Its next year in July 2017 http://www.ukiws.co.uk/ Music By https://www.pond5.com/stock-music/31867366/whistling-ukulele.html SUBSCRIBE TO ME ON YOUTUBE HERE https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA FOLLOW ME ON TWITTER https://twitter.com/NZWoodturning PLEASE LIKE MY FACEBOOK PAGE https://www.facebook.com/nzwoodturning/ INSTERGRAM https://www.instagram.com/nickzammeti/?hl en MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ YORKSHIRE GRIT http://yorkshire-grit.com/ PLEASE ALSO CHECK OUT MY NEW VLOGGING CHANNEL. IT’S CALLED NIKOLAI SCOTT VLOGS. MY NEW CHANNEL https://www.youtube.com/channel/UCAQsI9pUgViHsOOya-J3sTQ

 

Christmas Wand
By: Erick Wood
December 01, 2016 · 188 views

2016 Christmas Ornament Challenge

 

Woodturning Santa Hat Christmas Ornament with Candy!
By: Wood Frontier
December 01, 2016 · 926 views

This ornament is a woodturned Santa's hat. Inside is the perfect space to hide a chocolate kiss. The wood Christmas ornament box is made of box elder . The wooden santa hat is turned much like a wooden box is made on a lathe. Essentially it is a woodturned box. I used a variety of tools including my skew chisel, spindle gouge, bedan tool, and a scraper. The ornament held into a four jaw scroll chuck and later with a friction fit 'jam chuck' as I finished it off. The friction fit when woodturning can be a little fiddly to get right sometimes, but it is a nice way to hold pieces onto the

 

Advent Wreath - The Christmas Ornament Challenge 2016
By: PeteTGIF
November 30, 2016 · 593 views

Advent Wreath Made from Oak, Beech and Birch. Most of the wooden parts had been firewood. This is my entry for the 'The Christmas Ornament Challenge 2016' by Allan Stratton and Carl Jacobson. I wish everyone a peacefull Christmas and a Happy New Year 2017. Music by Kevin McLeod, http://www.incompetech.com Lizenz Creative Commons 3.0 http://creativecommons.org/licenses/by/3.0/deed.de

 

#72 2016 Christmas Ornament Challenge
By: Yuval Lahav Woodturning
November 30, 2016 · 4,625 views

So it's that time of the year again, and with a few seconds to spare, I decided to take a go at the Christmas Ornament Challenge. It didn't work to plan, but I won a good sized egg out of it, so hey, it's better then nothing! :) Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Greg Atkinson - Losing Over Christmas Cullah - Comfort To You All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are more then welcome to subscribe! These are the good people who kindly support me on Patreon: TOMTURNS.COM,

 

Christmas Ornament Challenge 2016
By: Turning Round
November 30, 2016 · 2,288 views

In this video I do an inside out turning, with a segmented turning, and an Alumilite Casting center around a Christmas Tree. This was a fun project but a long one with many steps. This is for the Christmas Ornament Challenge 2016.

 

2016 Ornament challenge- Natural edge bell: Making of
By: Michael Zurcher
November 30, 2016 · 445 views

Woodturning, Making, Creating: I show you how I make a rustic natural edge bell christmas ornament inspired by the Work of Cindy Drozda. This is my first entry into the Ornament challenge. I have only been wood turning since August 2016 so I still have a lot to learn! But it's been a fantastic journey so far! Happy holidays! Thanks for watching! Please feel free to comment, like, share, & I'd love to have you as a subscriber if you aren't already! :) Sticker swap? Send your sticker to the address listed below & I will send you one back. Thanks! :) Michael Zurcher 313 Gordon Drive Exton, PA 19341 Check out my Instagram here: https://www.instagram.com/michael_zurcher

 

The Scrap Tree - Christmas Ornament
By: Be Inspired with Dominic
November 30, 2016 · 687 views

There are so many reasons to keep even the smallest scraps of wood around - here is another one. Turn a few slats into a cool looking tree for all your tree decoration needs. Enjoy, and remember to be Inspired! Find everything you did not know you needed on my homepage - http://www.beinspiredwithdominic.com/ This is my entry to the 2016 Christmas Ornament Challenge. Check out the other entries here - https://www.youtube.com/playlist?list PL4W9FE566kZhAdzbt9715eEOupHJXXjwg 'It Came Upon a Midnight Clear' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0

 

Christmas Ornament Challenge 2016
By: Peter Woodbine
November 29, 2016 · 827 views

My entry to this year's challenge - 'Santa in a Spin' Scrollsaw Santa in several different wood species spinning in a turned ring. Music by courtesy of Teknoaxe - http://www.youtube.com/user/teknoaxe

 

Woodturning with The Old Woodworker 2016 Christmas Ornament Challenge
By: H F Bowern Designs - Harold Bowern
November 29, 2016 · 1,044 views

Welcome back This is my entry for the 2016 Christmas Ornament Challenge. It is a series of model trains made from wooden doweling and scraps from my shop. The Train engine has a cab (7/8” dia. Turning 3/4” long) a boiler (5/8” dia. turning 1 ” long) and a smoke stack (3/8” dia. 5/8” long with a ” tenon) all mounted on a ” piece of wood 1” wide and 2 ” The tanker has a body (5/8” dia. 2 ” long) mounted on a ” piece of wood 1” wide and 2 ” The caboose a body (3/4” square 2 ” long) mounted on a ” piece of wood 1” wide and 2 ” Each of the cars received wheels that were made from 3

 

Medallion Ornament
By: Derek Oliver
November 29, 2016 · 756 views

After the Yellow Bellied Chicken ornament, I figured I owed Peter an ornament that had a little more goodwill towards mankind and a little less third grade playground taunting. The Chicken Ornaments: https://www.youtube.com/watch?v 6Lns6saFA0M

 

Turning a Snowflake - Christmas Ornament Challenge
By: David K
November 28, 2016 · 1,104 views

My entry for this years 'Christmas Ornament Challenge' by Carl Jacobson and Allan Stratton. I want to thank both of them to bring us together for something that is really great!! - Used woods are Spalted Maple, Pear and Ash. - Carved snowflake filled with glue and gold glitter - Few coats with clear lacquer I also made a stand out of brass for the right presentation ; ) Please enjoy, and a comment would be very appreciated! https://www.facebook.com/davidkholz/ If you want to see more, click here: https://www.youtube.com/davidkholz?sub_confirmation 1 Um meinen Kanal zu abonnieren, klicke bitte hier: https://www.youtube.com/davidkholz?sub_confirmation 1 _____________________________________________________ Music: Eternal Hope von Kevin MacLeod ist unter der Lizenz Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) lizenziert. Quelle: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100238 Interpret: http://incompetech.com

 

Segmented Christmas Ornament!
By: The Russian Woodworker
November 28, 2016 · 586 views

In this video i show you how i mare my Christmas or ament for the annual 2016 Christmas ornament challenge hosted by Allan stratton and Carl Jacobson. Other videos: https://www.youtube.com/playlist?list PL4W9FE566kZhAdzbt9715eEOupHJXXjwg

 

2016 Ornament Challenge: Elizabeth's Entry
By: Make Crazydays
November 28, 2016 · 977 views

Homepage: http://make.crazydays.org Shop: https://make.crazydays.org/shop/ Instagram: https://www.instagram.com/makecrazydays

 

Rustic Robin Red Breast !! (Christmas ornament challenge 2016)
By: Templeboy Turnings
November 27, 2016 · 1,450 views

This is my entry to carl Jacobson's and Alan Stratton's Christmas ornament challenge 2016. This robin redbreast is turned from a sycamore branch and one poplar pen blank. I turned it using only a variety of skews !!! The glasses are a small fridge magnet. Thank you Carl and Allan for another fantastic and successful Christmas challenge !! Good luck to everyone that has entered !! Music Deck the Halls by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUA

 

2016 Christmas Ornament Challenge Santa's Hot Air Balloon
By: Daniel Vilarino
November 27, 2016 · 1,681 views

Hola/Hi! Este video está en Inglés, para verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/rtTi-rbY8w4 ***This video is in English*** Este video es en respuesta al desafío para el adorno navideño 2016 auspiciado por Carl Jacobson y Alan Stratton. ***This video is answering the 2016 Christmas Ornament Challenge sponsored by Carl Jacobson and Alan Stratton.*** El siguiente es el enlace a la lista de videos del desafío para el año 2016. ***The following is the link to the 2016 Challenge Playlist*** https://www.youtube.com/playlist?list PL4W9FE566kZhAdzbt9715eEOu

 

Christmas Ornament Challange 0001
By: Northern Woods Turning
November 26, 2016 · 346 views

Christmas Ornament Challenge 2016 - Martin Young - Northern Woods Turning

 

Woodturning Project Santa Claus
By: Carl Jacobson
November 25, 2016 · 22,214 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII I made this Santa Claus out of maple and Walnut. He's 7' tall and 4' at his widest point. I turned all the pieces on the lathe accept for the bag, I shaped that on the band saw. Christmas Ornament Challenge http://www.aswoodturns.com/ Here's a link to some of the tools I use in my videos, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https:

 

Traditional Hollow Globe Christmas Ornament
By: As Wood Turns
November 25, 2016 · 2,570 views

http://www.AsWoodTurns.com In a recent comment, a viewer asked if I was going to use my shop built hollowing tools to turn an ornament this year. Well, I had not intended to, since I was busy exploring hollowing through larger, more convenient holes. But I took it as as challenge and made this traditional globe ornament. To me, a traditional globe is designed to hang from a Christmas tree and consists of 1. A hollowed body of somewhat globe shape. Almost anything goes here and has been the target of a lot of creativity in Christmas Ornament Challenges, 2. A top finial - either short or long

 

Christmas Ornament Challenge 2016
By: Make Crazydays
November 22, 2016 · 704 views

Glory to God in the highest, and on earth peace among those with whom he is pleased! - Luke 2:14 About two years ago a neighbor allowed me to grab a couple pieces of walnut from a few trees he was having harvested in his yard. Originally I was hoping to make a bowl for him, but most of the wood cracked in drying, but I did have a large enough piece remaining to make this ornament for him. Christmas Ornament Challenge 2016 Playlist: https://www.youtube.com/playlist?list PL4W9FE566kZhAdzbt9715eEOupHJXXjwg Homepage: http://make.crazydays.org Shop: https://make.crazydays.org/shop/ Instagram: https://www.instagram.com/makecrazydays

 

Baby's First Ornament (Christmas Ornament Challenge 2016)
By: Ben Barwick
November 20, 2016 · 469 views

I make a hollowed ornament from spalted maple and walnut. I tried out an idea for personalizing it with the baby's nickname and birth year with mixed results due to my own poor handwriting. [This is my entry for the Christmas Ornament Challenge 2016.] Christmas Ornament Challenge 2016 Playlist: https://goo.gl/a6qAJL If you like what I am doing check out my social media and website. If you are interested in purchasing an item, check out my website or etsy page below. You can also support me by using any of the 'Tools I Use' links below to purchase anything from Amazon: www.waystonewoodworks.

 

Woodturning a Segmented Christmas Ornament #3
By: Fiaschetti Woodworking
November 20, 2016 · 166,291 views

Please visit my new website http://www.fiaschettiwoodworking.com/ This ornament is made of Cherry, Maple, Walnut, and Purple Heart. There are a total of 126 pieces. It is 3 inches long by 1.5 inches wide. This is my submission to the 2016 Christmas ornament challenge. If you have any questions please email me at: fiaschettiwoodworking@gmail.com

 

Christmas Oranment and Spinning Top
By: Turntastic Wood Designs
November 20, 2016 · 113 views

An extra special way to say Merry Christmas

 

Rotating Double Inside Out Ornament
By: Ollari's
November 20, 2016 · 9,864 views

This Double Inside out ornament is my 1st, 2nd and also 3rd try in one video and it's my entry for the 2016 Christmas Ornament Challenge, The small one is walnut pallet wood, The outer one is Steamed Beech and the one that you see on the end is Pine (which explodes) Thanks to Alan Stratton and Carl Jacobson! Thanks for watching! Visit my website: http://www.ollaris.tv Subscribe for more videos:https://www.youtube.com/c/Ollaris Please support me on Patreon: https://www.patreon.com/user?u 3361389 Twitter: https://twitter.com/Ollari_s Instagram: https://www.instagram.com/ollari.s 2016 Chri

 

Atomic Christmas Ornament For 2016 Ornament Challenge
By: As Wood Turns
November 17, 2016 · 2,745 views

http://www.AsWoodTurns.com Accepting videos for the Christmas Ornament Challenge at http://www.AsWoodTurns.com/Challenges This Christmas season I've largely avoided hollowing through small holes. This ornament is another such project where I prefer to hollow through the largest opening possible. In this case the largest opening equals the diameter of the ornament. For accent the walnut blank was saw at a random angle; the cut was cleaned up and a strip of oak glued in the kerf. I repeated this process a couple more time before mounting to my lathe. On the lathe, I used the perfect sphere p

 

Wood Turning a ornament
By: Tommy Akridge Designs
November 17, 2016 · 7,645 views

This video is about the 2016 Christmas Ornament challenge sponsored by Alan Stratton and Carl Jacobson My name is Tommy Akridge, I am a small town wood turner working on wooden bowls, segmented bowls and vases. some of my work could be considered art and also consist of Urns, vases and boxes. I have been turning for just a few years and I have found that I love it. I get lost in my work and that helps me cope with my the day to day work life. Showing my work on YOUTUBE has changed the way I turn, I enjoy showing others what i'm doing and maybe them be better turners. Thank You For Watching Tommy

 

Christmas Ornament Challenge 2016
By: Jeremy Edwards
November 16, 2016 · 1,254 views

This is a triple layer Inside Out Christmas Tree made of Maple. I have never seen anyone try this before, so I figured I'd give it a try. The concept was awesome. However, the execution was not so good. I'll give it another try in the future. Enjoy.

 

2016 Ornament Challenge - Miniature
By: Barry's Woodturning
November 14, 2016 · 3,690 views

This year I decided to turn a miniature ornament for the challenge. Turning something this small is not as fast as I thought it would be. You have to slow down and make small cuts. It also gave me a chance to put some new tools to use. I made the miniature scraper and detail tool using some HSS I bought online: https://www.youtube.com/watch?v skVlV-l4QhE Thanks to Carl Jacobson and Alan Stratton for hosting the Ornament Challenge. Playlist: https://www.youtube.com/playlist?list PL4W9FE566kZhAdzbt9715eEOupHJXXjwg Contest announcement: http://www.aswoodturns.com/challenges/ https://www.youtube.com/watch?v psSjljDTtvU&index 1&list PL4W9FE566kZhAdzbt9715eEOupHJXXjwg Music by Jason Shaw @ audionautix.com

 

How to Turn a Chickadee Ornament - Short Version
By: Mike Peace Woodturning
November 13, 2016 · 1,828 views

I demonstrate how to woodturn a cute Chickadee bird ornament. This is my entry for the 2016 Ornament Challenge. Hollowing is done by simply drilling out and plugging the bottom. Click here https://youtu.be/07NauF_FsFU for the full length version of this project. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html Music: Wish Background by Kevin Macleod

 

Woodturning 2016 Christmas challenge - wooden bells
By: Marc 's Oneway of turning
November 13, 2016 · 2,025 views

3 small wooden bells made with exotic wood. Thanks for watching. Ma chaîne française ici: https://www.youtube.com/channel/UC83rt1EvRU51x9P93BPr0Hw/videos

 

2016 Christmas Ornament Challenge
By: Kostas Annikas Deftereos
November 12, 2016 · 1,565 views

Aυτή είναι η δική μου συμμέτοχη στο 2016 Christmas Ornament Challenge ελπίζω να σας άρεσε και να βρήκατε χρήσιμες τις πληροφορίες που σας δίνω !! Από κάτω σας βάζω τα link των διοργανωτών και φυσικά το link του διαγωνισμού 2016 Christmas Ornament Challenge https://www.youtube.com/watch?v psSjljDTtvU http://www.AsWoodTurns.com Carl Jacobson Youtube https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Youtube https://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ Easy https://www.etsy.com/shop/Thewoodshoptv Website http://www.thewoodshop.tv/ Google https://plus.google.com/1131999045658... Facebook https://www.facebook.com/carljacobson68 As Wood Turns Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns μπορειτε να με βρειτε επισης στις παρακατω σελιδες facebook : https://www.facebook.com/annikas8 instagram : https://www.instagram.com/kostas_annikas_deftereos/ google : https://plus.google.com/u/0/ KostasAnnikasDeftereos

 

Christmas Ornament Challenge 2016
By: Jtcturning
November 12, 2016 · 1,804 views

Redheart, Holly, and basswood strips are used to create this innovative Christmas ornamnet.

 

New dye-na-flow paint for Christmas ornaments
By: The AZ Viking
November 12, 2016 · 50 views

I talk a Lil bit about some new paint I've ordered today and how I like it so far

 

Inside Out Christmas Ornament
By: Maple-Crossing Woodworks
November 11, 2016 · 8,975 views

My first successful inside-out turning. This is a very simple ornament but shows one way of completing an inside-out project. I'm guessing I'll be doing more of these this winter

 

Finial Star - Christmas Ornament
By: Walter Wager
November 11, 2016 · 1,188 views

Create a finial star ornament

 

Woodturning a Christmas decoration
By: Andrew Whale
November 10, 2016 · 505 views

Inspired by an article in Woodturning Magazine (Dec 2016), so I thought I would give it a try. In hindsight I should have probably used timber 35mm square rather than 45mm. It would have saved some time on the spindle roughing gouge but, then again, you need to practice, practice, practice. I'm pleased that I had an event free time with the scary skew. I also enjoyed using the light pull friction drive for the first time. I hope you find the video useful - but please remember I'm a novice turner. Cheers. Disclamer: I do not recommend any of the methods/techniques I use as these could be unsafe. Woodturning is a potentially hazerdous activity and it is your responsibility to use proper methods/techniques and follow appropriate health and safety practices.

 

Triple twist ornament
By: OJ Woodworking Crafts
November 10, 2016 · 7 views

Hand crafted ornament with a triple twist made from poplar and walnut. Can be purchased at http://www.ojwoodworkingcrafts.etsy.com #ojwoodworking

 

Tree shaped ornament
By: OJ Woodworking Crafts
November 09, 2016 · 4 views

Handcrafted tree shaped ornament made from Peruvian walnut and African maple. Can be purchased at http://www.ojwoodworkingcrafts.etsy.com #ojwoodworking

 

Bell ornament
By: OJ Woodworking Crafts
November 08, 2016 · 3 views

Handcrafted bell shaped Christmas ornament made from African mahogany and purple heart. I hollowed the bell and added a clapper. Can be ordered at http://www.ojwoodworkingcrafts.etsy.com #ojwoodworking

 

ΚΑΜΠΑΝΑ-CHRISTMAS BELL
By: Matthew Kaltsidis
November 06, 2016 · 381 views

Christmas woodturning bell by Matthew.A handmade ornament for Christmas tree. Κατασκευή ξύλινης καμπάνας για το Χριστουγεννιάτικο δένδρο.

 

Spindle Gouge cuts and Christmas Ornaments
By: Woodturners of Southwest Missouri
November 06, 2016 · 2,778 views

Anthony Harris demonstrates the different cuts with a spindle gouge and then makes Christmas Ornaments for the Woodturners of Southwest Missouri. Anthony did a fantastic job of teaching the proper use of a spindle gouge. He has demonstrated several times for our club and is back on the calendar in the near future. Check out Anthony's website at: http://acmepipes.com/ Visit our clubs website at: http://www.woodturnersofswmo.org/ Please forgive the audio on this video, we had issues we had not experienced before. Still ... this is a very good demo!

 

Icicle Christmas ornament
By: OJ Woodworking Crafts
November 05, 2016 · 12 views

Handcrafted icicle Christmas ornament made from walnut, red oak and cypress. Can be ordered at http://www.ojwoodworkingcrafts.etsy.com #ojwoodworking

 

Twisted Christmas ornament
By: OJ Woodworking Crafts
November 05, 2016 · 602 views

Handcrafted Christmas ornament with a twist made from walnut and red oak. Http://www.ojwoodworkingcrafts.etsy.com #ojwoodworking

 

Christmas Ornament 2016
By: Mauro il tornitore
November 04, 2016 · 1,393 views

An ornament for the Challenge 2016. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Un ornamento natalizio. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro

 

Inside Out Christmas Ornament For 2016 Challenge
By: As Wood Turns
November 04, 2016 · 41,773 views

http://www.AsWoodTurns.com Turned wood inside out ornaments give me a certain fascination. Turning one presents some difficulties and risks -- all of which can be quickly resolved except one. The most difficult part is visualizing the empty space to be created inside the ornament. I've tried to model it. One thing that has worked the best is to make a turning with 1/4 inch steps every 1/4 inch. Then when reversed and turned, some visualization of scale is possible. To begin, an inside out blank is constructed from four perfectly square milled pieces of wood. Some turners put craft paper in t

 

Icicle ornament
By: OJ Woodworking Crafts
November 03, 2016 · 7 views

Handcrafted scrap wood icicle ornament made from walnut, cypress and red oak. Can be ordered at http://www.ojwoodworkingcrafts.etsy.com #ojwoodworking

 

THE WITCH OF EASTWICK!
By: Nick Zammeti
October 31, 2016 · 2,677 views

Its Haloween 2016..... dont be scared now! Music By https://soundcloud.com/danijel-zambo https://danijel-zambo.bandcamp.com/ Heres the black diamonds I mentioned http://www.ebay.co.uk/itm/261580283155?_trksid p2057872.m2749.l2649&var 560452754701&ssPageName STRK%3AMEBIDX%3AIT SUBSCRIBE TO ME ON YOUTUBE HERE https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA FOLLOW ME ON TWITTER https://twitter.com/NZWoodturning PLEASE LIKE MY FACEBOOK PAGE https://www.facebook.com/nzwoodturning/ INSTERGRAM https://www.instagram.com/nickzammeti/?hl en MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ YORKSHIRE GRIT http://yorkshire-grit.com/ PLEASE ALSO CHECK OUT MY NEW VLOGGING CHANNEL. IT’S CALLED NIKOLAI SCOTT VLOGS. MY NEW CHANNEL https://www.youtube.com/channel/UCAQsI9pUgViHsOOya-J3sTQ

 

Stylized Pumpkin Just In Time For Halloween
By: As Wood Turns
October 28, 2016 · 5,832 views

http://www.AsWoodTurns.com I'm always on the lookout for a project idea that I can adapt to a turning project. While visiting my daughter in law, she had an adorable stylized pumpkin made from canning jar rings with cinamon stick rolls as the stem. Immediately, the thought came 'Can I do this as a woodturning'. There were some immediate differences. Canning jar rings tend to nest together. For a wood project, I would have to taper the rings. And there would have to be a lot of rings. In fact, this project is all about making the tapered rings. My initial plans for efficient tapering did not

 

The Acrylic Finial Bauble. My Entry for the 2016 Christmas Ornament Challenge
By: Jim Overton - Jimson's Stuff
October 27, 2016 · 3,766 views

This is my entry into the 2016 Christmas Ornament Challenge that is set up and run by Carl Jacobson and Alan Stratton. The decoration is constructed from clear and coloured transparent acrylic sheets and a clear acrylic rod. It was turned using hand tools on a wood lathe with a combination of Robert Sorby zero jaws and a pen mandrel. Drill size 1/4 inch. Polished with a combination of Yorkshire Grit and Chestnut products Burnishing Cream. http://yorkshire-grit.com/ Carl Jacobson's YouTube channel and website; https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg http://thewoodshop.tv/ Ala

 

Candy Christmas ornament
By: OJ Woodworking Crafts
October 27, 2016 · 9 views

Handcrafted candy shaped Christmas ornament made from padauk, maple and red oak. Can be ordered at http://www.ojwoodworkingcrafts.etsy.com

 

Norfolk Pine Christmas Ornament.
By: Well Rounded Woodturning
October 26, 2016 · 275 views

Norfolk Pine with Milo finial Christmas Ornament. Music is Far Away Coast by Koresma. Thanks for watching!

 

Arbortech Christmas decorations
By: Axminster Tools & Machinery
October 25, 2016 · 1,832 views

High power 750W electric motor for easy timber removal in the hardest woods. Ideal for precision joints, recesses, rebates and corners. Great detail and control possible. Dustless timber removal. This kit is supplied complete with a 20mm flat chisel, a 20mm gouge chisel and high pressure lubricant. To purchase: http://www.axminster.co.uk/arbortech-pch350-power-chisel-701802 ---------------------------------------------------------------------------------------------- Shop - http://www.axminster.co.uk Blog - http://knowledge.axminster.co.uk/ Facebook - https://www.facebook.com/axminstertoolcentre eBay Store - http://stores.ebay.co.uk/axminstertoolcentre Call (UK) - 0800 371822

 

Icicle Christmas ornament
By: OJ Woodworking Crafts
October 25, 2016 · 9 views

Handcrafted icicle Christmas ornament made from red oak, walnut and cypress. Can be ordered at http://www.ojwoodworkingcrafts.etsy.com #ojwoodworking

 

Le PicBois #39 - Christmas Cheeseburger Ornament
By: Le PicBois
October 24, 2016 · 2,164 views

[ This is my entry for the 2016 Christmas Ornament Challenge hosted by Alan Stratton & Carl Jacobson. ] 2016 Christmas Ornament Official Playlist: https://www.youtube.com/playlist?list PL4W9FE566kZhAdzbt9715eEOupHJXXjwg Last year's project: https://www.youtube.com/watch?v NY0ViqUI6pI Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois Special Thanks: Easy Wood Tools: https://www.youtube.com/user/EasyWoodTools Alan Stratton: https://www.youtube.com/user/AsWoodTurns Carl Jacobson: https://www.youtube.com/user/haydenHD _______________________________________________________ I work for free and I pay my director with cookies… Please help me to buy some flour by clicking on the link below: https://www.paypal.me/lepicbois

 

Christmas ornament
By: OJ Woodworking Crafts
October 24, 2016 · 10 views

Handcrafted Christmas ornament made from padauk and walnut. Can be ordered at http://www.ojwoodworkingcrafts.etsy.com #ojwoodworking

 

Spiral Christmas ornament
By: OJ Woodworking Crafts
October 23, 2016 · 13 views

Hand crafted spiral Christmas ornament made from red heart and orange heart. Can be ordered at http://www.ojwoodworkingcrafts.etsy.com #ojwoodworking

 

Christmas ornament
By: OJ Woodworking Crafts
October 22, 2016 · 6 views

Handcrafted padauk and purple heart Christmas ornament. Can be ordered at http://www.ojwoodworkingcrafts.etsy.com

 

Laser Cut Inlay Christmas Ornament
By: Carl Jacobson
October 21, 2016 · 11,429 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII The Christmas Ornament Challenge is now underway. I look forward to seeing what you come up with again this year. Ron Brown's Best- http://ronbrownsbest.com Submit your entry- http://www.AsWoodTurns.com/Challenges I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoodshoptv Patreon, I really appreciate your support. https://www.patreon.com/CarlJacobson

 

Christmas ornament
By: OJ Woodworking Crafts
October 21, 2016 · 9 views

Hand crafted scrap wood Christmas ornament. Can be ordered at http://www.ojwoodworkingcrafts.etsy.com #ojwoodworking

 

Christmas ornament
By: OJ Woodworking Crafts
October 20, 2016 · 10 views

Handcrafted Christmas ornament made out of red ehart, purple heart and walnut. Can be ordered at http://www.ojwoodworkingcrafts.etsy.com #ojwoodworking

 

Nativity scene - Presepe
By: Mauro il tornitore
October 19, 2016 · 1,496 views

A many wood Nativity scene for the Christmas Challenge 2016. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks to everyone , to Alan and to Carl. Mauro Un Presepe multi-legno per la sfida di Natale 2016. Spero vi piaccia il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie a tutti, ad Alan ed a Carl. Mauro

 

2016 Christmas Ornament Challenge
By: As Wood Turns
October 19, 2016 · 3,458 views

http://www.AsWoodTurns.com We're announcing the Fifth Annual Christmas Ornament Challenge. This year the challenge is officially open to all crafts. To enter, video you making your ornament and upload it to your YouTube channel. Then at http://www.AsWoodTurns.com/Challenges, complete the form. But sure you get a successful confirmation message. The challenge ends midhight November 30, 2016 We'll announce winners in December. Again. the challenge is open to ornaments from all crafts and combination of crafts. Alan's Website: http://www.AsWoodTurns.com Carl's Website http://www.TheWoodShop.tv Where to submit video: http://www.AsWoodTurns.com/Challenges

 

Christmas tree ornament.
By: OJ Woodworking Crafts
October 18, 2016 · 7 views

Handcrafted chistmas tree ornament out of Peruvian walnut. Can be ordered at http://www.ojwoodworkingcrafts.etsy.com #ojwoodworking

 

Christmas Bell Ornament
By: Donny Lawson
October 17, 2016 · 185 views

This Ornament is made from Spalted Pecan.

 

Christmas ornament
By: OJ Woodworking Crafts
October 17, 2016 · 8 views

Handcrafted walnut and red heart Christmas ornament. Can be ordered on my etsy page at http://www.ojwoodworkingcrafts.etsy.com #ojwoodworkong

 

Christmas ornament
By: OJ Woodworking Crafts
October 15, 2016 · 7 views

Handcrafted Christmas ornament out of purple heart and padauk. Can be ordered at http://www.ojwoodworkingcrafts.etsy.com .

 

Wood turning a Halloween Pumkin
By: Tommy Akridge Designs
October 13, 2016 · 7,128 views

This little video is a fun little video about making a wooden pumpkin for halloween. My name is Tommy Akridge, I am a small town wood turner working on wooden bowls, segmented bowls and vases and many other things . some of my work could be considered art and also consist of Urns, vases and boxes. I have been turning for just a few years and I have found that I love it. I get lost in my work and that helps me cope with my the day to day work life. Showing my work on YOUTUBE has changed the way I turn, I enjoy showing others what i'm doing and maybe them be better turners. Thank You For Watching Tommy

 

segmented plywood globe
By: Steve Krumanaker
October 09, 2016 · 32,027 views

Easy to do segmented plywood glue up for Christmas ornament globes.

 

Figura di donna con tornitura disassata - Multi axis female figure
By: Mauro il tornitore
October 08, 2016 · 1,351 views

Una figura femminile stilizzata ottenuta con la tecnica della tornitura multiasse al tornio. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro A female figure from a log of spalted beech with the multi axis turning. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro

 

Christmas ornament
By: OJ Woodworking Crafts
October 08, 2016 · 9 views

Hand crafted walnut Christmas tree ornament. Can be ordered at www.ojwordworkingcrafts.etsy.com .

 

Up Up and Away - Part 1 of 2 - Hot Air Balloon Ornament
By: Mike Peace Woodturning
October 07, 2016 · 2,010 views

In Part 1 I demonstrate turning a hot air balloon ornament on a wood lathe and hollowing it out. Click here https://youtu.be/o2a1ZbSKfbw for Part 2 where I turn and texture the gondola, color and assemble the completed ornament. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Up Up & Away! Part 2 - Hot Air Balloon Ornament
By: Mike Peace Woodturning
October 07, 2016 · 1,979 views

In Part 2 I turn and texture the gondola, color and assemble the completed ornament. Click here https://youtu.be/EJftCWGvHTo To to watch Part 1 where I demonstrate turning a hot air balloon ornament on a wood lathe and hollowing it out. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Christmas ornament
By: OJ Woodworking Crafts
October 06, 2016 · 9 views

Handcrafted Christmas ornament

 

CHRISTMAS JACK!
By: Nick Zammeti
October 05, 2016 · 1,624 views

A little man I turned for Christmas. his name is Christmas Jack. Its not Xmas yet but its not long.. Music By https://soundcloud.com/danijel-zambo https://danijel-zambo.bandcamp.com/ SUBSCRIBE TO ME ON YOUTUBE HERE https://www.youtube.com/channel/UC3-0S7vXfwYY2jj5EkMpymA FOLLOW ME ON TWITTER https://twitter.com/NZWoodturning PLEASE LIKE MY FACEBOOK PAGE https://www.facebook.com/nzwoodturning/ INSTERGRAM https://www.instagram.com/nickzammeti/?hl en MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ PLEASE ALSO CHECK OUT MY NEW VLOGGING CHANNEL. IT’S CALLED NIKOLAI SCOTT VLOGS. MY NEW CHANNEL https://www.youtube.com/channel/UCAQsI9pUgViHsOOya-J3sTQ

 

A Bird in the Hand...Woodturning a Chickadee Ornament
By: Mike Peace Woodturning
September 30, 2016 · 2,128 views

I demonstrate how to turn a cute Chickadee bird ornament on a wood lathe. This is a great beginner project because hollowing is done by simply drilling out and plugging the bottom. Inspiration for this comes from an article by Chuck Ruby in Nov 2015 More Woodturning Magazine. Here is a great video for Making Eyelets for Christmas Ornaments https://www.youtube.com/watch?v gD4uTC76Y8Q You can download demonstration handouts including this one, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

My Christmas Ornament For 2016 Christmas Ornament Challenge
By: As Wood Turns
September 30, 2016 · 3,856 views

http://www.AsWoodTurns.com This year's Christmas Ornament Challenge is rapidly approaching. The submission period is November. We're working on the official announcement. Meanwhile, I want to turn a simple ornament. While there are few rules for ornaments, one that occurs to me is that something that must hang from a tree must be lighter than solid wood. But I don't like hollowing thru a small hole. So for this ornament, I'm turning it cross grain, part it, hollow the two portions, then glue the piece back together again. The challenge for this ornament is how to mount it to the lathe. Good turning. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Traumerei by Shumann performed by Becky Schlappi. Used by permission.

 

sandcarved ornament disk
By: Al Hockenbery
September 27, 2016 · 108 views

This is part of a demonstration given to Tri-County woodturners september 2015. it shows turning a disk ornament with double sided tape, cutting resist in the shape of a dragon fly, and sang carving a dragon fly. these disk make a nice canvas for wooden onaments, pendants, or inserts in box lids

 

Turn a Finial Ornament by Hal Simmons - Part 2 of 2
By: Gwinnett Woodworkers
September 23, 2016 · 2,537 views

Hal Simmons, a noted local woodturner, finishes the top of the ornament, parts it off and demonstrates his wax finish techniques including Beall buffing in Part 2 of this two part series. Click here for Part 1 https://youtu.be/9dPY-NImwxM where Hal demonstrates woodturning an elegant, one piece finial ornament. He demonstrates the usefulness of a beading and parting tool with detailed closeups. Recorded and presented in HD 09-08-2016 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Turn a Finial Ornament by Hal Simmons - Part 1 of 2
By: Gwinnett Woodworkers
September 23, 2016 · 3,316 views

Hal Simmons demonstrates woodturning an elegant, one piece finial ornament. He demonstrates the usefulness of a beading and parting tool with detailed closeups. Click here for Part 2 https://youtu.be/-3UWiopxZAw where Hal, finishes the top of the ornament, parts it off and demonstrates his wax finish techniques including Beall buffing. Recorded and presented in HD 09-08-2016 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

How to Turn a Simple Globe Ornament
By: Mike Peace Woodturning
September 16, 2016 · 9,827 views

I show you how to woodturn an attractive but simple and elegant ornament turned from a single piece of wood. I show how to turn, finish and more. These make quick and easy gifts for Christmas. You can download demonstration handouts, downloadable copies of articles I have published, and other useful woodturning information available on my website http://mikepeacewoodturning.blogspot.com/p/woodturning-resources.html

 

Woodturning an Icicle Ornament - A video for new woodturners
By: Walter Wager
August 11, 2016 · 15,661 views

Video is a demonstration of turning a tree ornament described in an article by Nick Cook, a professional woodturner from Atlanta, GA. Appropriate for a person just learning to turn, the video focuses on using the spindle roughing gouge, the ABC procedure for tool use, use of a spindle gouge, and sanding. A related outline of steps can be found at http://media.wix.com/ugd/b4cb96_ddc065e896734ca8a222987c99636afd.docx?dn %22Beginner%20Project%20-%20Snowman%20ornament.docx%22

 

My First Attempt At Turning An Inside Out Christmas Ornaments
By: Peter Mitchell
January 31, 2016 · 382 views

Inside Out Christmas Ornaments Hi all this is a old video from October 2015 I wasn't going to upload it as my battery died on my camera. I mist a lot of the filming plus I sort of classed it as a faille it didn’t turn out very good. I had only bean turning for about 2 months I thought I would upload it as I haven’t been in my shop for a while as it has been too cold I have to be a bit careful because of my health. Thank you to all my subscribers for sticking with me I hope to get back in my workshop soon

 

Cross Drilled Christmas Ornaments, by Dan Douthart
By: Gwinnett Woodworkers
December 26, 2015 · 30,082 views

Dan Douthard shows his method of creating a hollow Christmas ornament with a hanging decoration in the middle. Dan begins by drilling holes in each face of a 1 ” cube. After turning it spherical and setting a finial, he hangs a decorative element in the cross drilled cavity and mounts an icicle. The result is an heirloom Christmas tree decoration. Recorded and presented in HD 12/19/2015 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Turning a Finial and Icicle for Your Christmas Ornament, by Dan Douthart
By: Gwinnett Woodworkers
December 26, 2015 · 8,557 views

Dan Douthart demonstrates the way he turns finials and icicles for his Christmas ornaments. In his process, he maintains contact with the icicle with a live center in the tail stock and turns to the flame point. The last steps involve backing off the pressure from the tail stock and cutting the flame point free. Recorded and presented in HD 12-19-2015 Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

2015 Christmas Ornament Woodturning Challenge Results
By: As Wood Turns
December 24, 2015 · 3,632 views

http://www.AsWoodTurns.com Official Challenge Playlist at: https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Sponsors - Craft Supplies USA –www.woodturnerscatalog.com - Robust Woodturning Tools - www.turnrobust.com - Chefware Kits - www.chefwarekits.com - Pony Tools Inc. – www.ponytools.com - Easy Woodtools - www.easywoodtools.com - Lyle Jamieson - http://lylejamieson.com - Hunter Tools - http://huntertoolsystems.com - Konifer Watch - www.koniferwatch.com - Zack Fuller Challenge Victors 1 Justin FIASCHETTI https://youtu.be/tvOeMkSCAic 2 Jose Alberto Giordano https://w

 

Woodturning A Christmas Bell
By: Jerry Paul
December 24, 2015 · 3,711 views

I uploaded this earlier but something went wrong with the upload and I lost half the sound. This will likely be my last upload before the new year, so I wanted to do one more Christmas ornament. Once again, I've sped up the video a little, but with the Santa hat, the elf voice kind of works. HO HO HO! Merry Christmas! Cheers!

 

2015 Christmas Ornament Challenge 1
By: Jeremy Edwards
December 24, 2015 · 243 views

 

Turn a Christmas Ornament - WOOD magazine
By: WOOD magazine
December 22, 2015 · 35,206 views

Use your wood lathe to turn simple Christmas tree ornaments from basswood. In this complete step-by-step video, you'll learn how to turn the brass ferrule, a simple way to drill a small hole in the end of a turning, and get tips on coloring the wood with dyes. Download the project plans here: http://www.woodstore.net/plans/turning/569-Bright-and-Cheery-Turned-Christmas-Ornaments.html Subscribe to the WOOD YouTube channel: https://www.youtube.com/subscription_center?add_user Wood Subscribe to WOOD magazine: http://www.woodmagazine.com/subscribe Get digital issues for iPad, Kindle, and more: http://www.woodmagazine.com/digital Official website: http://www.woodmagazine.com Shop for woodworking project plans at: http://www.woodstore.net?a youtube Read tool reviews from WOOD editors and other real woodworkers at: http://www.reviewatool.com Facebook http://www.facebook.com/woodmagazine Twitter http://www.twitter.com/WOOD_Magazine Pinterest http://www.pinterest.com/woodmagazine

 

Christmas Ornament Challenge Follow up
By: Turning Round
December 21, 2015 · 190 views

Christmas Ornament Challenge Follow up, I this video I talk about my ornament and a few other submissions to the Christmas ornament Challenge. I found a few that I thought were amazing. The first one was from Yuval Lahav, This was amazing, very detailed, I was impressed. https://youtu.be/6_GbpGRTSG0?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Here is the Olaf Video, I like this one as well, it is from Tim Keeley https://youtu.be/9D5jg04mqP4?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd I hope you get a chance to watch them all and share with your friends.

 

Wood Turning #123 1234567 Texted A Christmas Ornament
By: The Tiny Trailer Workshop
December 15, 2015 · 611 views

There is a link to the texted version within Click on the links to see the ornament being made in pieces! This link takes you to the 4th Annual Christmas Ornament Challenge playlist... http://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd The wood ; 3:18 The Padauk Top ; 4:27 A Blue Onion ; 3.25 Yellow Heart Globe; 2:43 Umbrella ; 4:44 The Finial ; 4:45 The Bells ; 2:16 Forever! Hope you found it enjoyable. Thanks for watching Larry

 

Wood Turning #123 1234567 A Christmas Ornament
By: The Tiny Trailer Workshop
December 14, 2015 · 917 views

There is a link to the texted version within! Click on the links to see the ornament being made in pieces! This link takes you to the 4th Annual Christmas Ornament Challenge playlist... http://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd The wood ; 3:18 The Padauk Top ; 4:27 A Blue Onion ; 3.25 Yellow Heart Globe; 2:43 Umbrella ; 4:44 The Finial ; 4:45 The Bells ; 2:16 Forever! Hope you found it enjoyable. Let me know if any parts don't work right! Thanks for watching Larry

 

Making Christmas Ornament
By: Tommy Akridge Designs
December 12, 2015 · 2,305 views

The making of an easy Christmas tree Ornament

 

Christmas Drum Ornament For Little Drummer Boy
By: As Wood Turns
December 10, 2015 · 2,283 views

http://www.AsWoodTurns.com This video uses the third and last pieces of wood glued into a stave segmented block: The first was a traditional globe ornament; then a vase ornament; and now a drum ornament. I do not know the pen blank wood - this wood was part of a 'exotic tropical wood' pen blank Black Friday sale a couple of years ago. However, I did use Padauk in between each pen blank. The tropical wood is quite soft and tears out from end grain very easily. This ornament is finished with Mylands Friction Polish. To finish turning the exterior of my cylinder, I needed to customize a chuck

 

Christmas Ornament Vase Reminds Of Spirit Of Giving
By: As Wood Turns
December 03, 2015 · 2,926 views

http://www.AsWoodTurns.com This Christmas vase is turned from mixed 'tropical pen blanks'. I had glued up the pen blanks for an earlier project and had ample left over. Move than enough for this project. Since the wood was already glued up, this was a simple project. I hollowed it, then added a top and a bottom to the vase. It reminds me of the gifts given the the Christ Child. Good turning. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Bach Guitar Calm under license via Adobe Premiere Elements Smart Sound.

 

The annual 4th Christmas Ornament Entry TTW
By: The Tiny Trailer Workshop
December 01, 2015 · 1,022 views

So again this is not the final video! There is so much more to tell than this can say! There are things like the lights turn off and on by turning the top piece! This would have been a great project for the WyomingWoodturner Sam Angelo... but I don't have any of that kind of gear anyway... so I took a hack saw and cut the top off a pop bottle. Gluing the top of the bottle to the top ball makes a place for wires and the battery. I soldered washers to the two wires and then the battery sits on one... and the insulation on the upper one keeps the top washer from making contact until you turn the lid all the way closed! But that will be all looked into in the next videos! Thanks to Carl and Alan for putting on the challenge and for doing all the hard work! Thanks too for watching Larry

 

Wrapping Up The Ornament Challenge
By: Carl Jacobson
November 30, 2015 · 7,805 views

Last day to get your entry in for the Christmas Ornament Challenge. Challenge ends 11/30/15 Sponsors - Craft Supplies USA- www.woodturnerscatalog.com - Robust Tools- www.turnrobust.com - ChefwareKits- www.chefwarekits.com - Pony Tools Inc- www.ponytools.com - Easy Wood Tools- www.easywoodtools.com - Hunter Tools- www.huntertoolsystems.com - Konifer Watches- www.koniferwatch.com - Lyle Jamieson- www.lylejamieson.com - Zac Higgins- www.nvwoodwerks.com - https://www.youtube.com/user/NVWoodwerks Paul Jackman https://www.youtube.com/user/JackmanCarpentry I upload a new project video every Frid

 

Christmas Ornament Challenge 2015
By: Chris Pine
November 30, 2015 · 2,438 views

This years Christmas Ornament Challenge. I for sure have no expectations of winning anything. This entry is so simple and I am sure way below anyone else entries. I wanted to support this challenge however and also its been a while since I made a video. I miss doing them. I have had some things in life that have occupied my time and has taken away from etc shop and making videos. Merry Christmas and Happy new year everyone! I hope this time of year finds you blessed and happy! My Info: Website: TheChrisPineWorkshop.com YouTube Channel https://www.youtube.com/user/TheChrisPineWorkshop Time

 

2015 Christmas Ornament Challenge Old Kerosene Lamp
By: Daniel Vilarino
November 30, 2015 · 9,289 views

Hola/Hi! ***This video is in English*** Este video está en Inglés, si quieres ver la versión en Español, por favor haz un click en el siguiente enlace: https://youtu.be/LMmcmqWxrHs ***This is my entry for the 4th Christmas Ornament Woodturning Challenge, sponsored by Alan Stratton and Carl Jacobson.*** Este es mi video para el 4to Desafío del Adorno Navideño Torneado, auspiciado por Alan Stratton y Carl Jacobson. El siguiente es el enlace para la lista de videos de 4to Desafío del Adorno Navideño Torneado: ***The following is the link to the 4th Christmas Ornament Woodturning Challenge Pla

 

Woodturners Journal: Create a Christmas Ornament on a Lathe
By: Woodturners Journal
November 30, 2015 · 646 views

Jerrod turns a Christmas ornament out of wood on a lathe. It's made from black walnut with a decorative silver stem and top.

 

Emily Wood Ornament Challenge
By: Erick Wood
November 30, 2015 · 265 views

Christmas Ornament Challenge Follow us on Facebook @ WoodShed Designs https://www.facebook.com/WoodShed-Designs-142003032560268/?ref aymt_homepage_panel Official playlist https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd

 

2015 Ornament Challenge
By: Erick Wood
November 30, 2015 · 14 views

This video is about 2015 Ornament Challenge

 

Woodturning a Classic Christmas Ornament 2015 Ornament Challenge
By: Peter Matthew
November 29, 2015 · 1,640 views

This week I made my second entry to Carl Jacobson and Alan Stratton's Ornament Challenge. It's the classic woodturned ornament. I used a piece of Walnut for the globe and two pieces of African Blackwood for the finials. Thanks for watching! ---------------------------------------------------------------------------- Carl Jacobson: https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Alan Stratton: https://www.youtube.com/channel/UCucYlCYbbf1ZDGO-7OjKl5w Ornament Challenge: https://www.youtube.com/watch?v F0ssrYgQriE Finial Chucky: http://www.rubberchucky.com/store/p6/Finial_Chucky.html ---------------------------------------------------------- If you would like a sticker, send me a stamped self addressed envelope or one of your own stickers with your address. Peter Matthew 6388 East Executive Drive Westland, MI 48185 Contact me: peterturnswood@gmail.com My eBay store: http://www.ebay.com/usr/dste6080 Subscribe to my YouTube Channel! I post videos every Friday!

 

Mobile Ornament
By: Make Crazydays
November 29, 2015 · 388 views

Elizabeth turns a mobile ornament using a piece of a failed ornament attempt and a couple pen blanks. Homepage: http://make.crazydays.org Shop: https://make.crazydays.org/shop/ Instagram: https://www.instagram.com/makecrazydays/ Music: Howie Mitchell - Psaltery Piece http://freemusicarchive.org/music/Howie_Mitchell/Howie_Mitchell_-_Singles/02_Psaltery_Piece_1344

 

4 Turning a goblet ornament
By: Eric Percival
November 29, 2015 · 283 views

This video is about Turning a goblet ornament for the 2015 ornament turning challenge. The wood is cedar which is quite soft and delicate to turn but is quite beautiful on the christmas tree!

 

Christmas Ornament Challenge 2015
By: Peter Woodbine
November 29, 2015 · 596 views

'Silver Planet' My entry for Alan & Carl's 2015 Christmas Ornament Challenge

 

Gyro Ornament
By: Derek Oliver
November 29, 2015 · 674,056 views

A gyroscopic ornament made from pine and cedar. I made this for the 2015 Christmas Ornament Challenge (link below) https://www.youtube.com/watch?v KnPEz-X-T34&list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd

 

Christmas ornament
By: Built by Bill
November 29, 2015 · 263 views

Turning a Christmas ornament from maple, cherry and walnut. The turning broke on the lathe and and a low tech repair to finish the ornament. Thanks to Alan Stratton and Carl Jacobson for this challenge.

 

Wood turning Christmas ornament challenge 2015
By: Woodslee Summercraft
November 28, 2015 · 21,625 views

This is my entry into the christmas ornament challenge 2015 by Carl Jacobson and Allen Stratton, it was a work in progress with design changes as I made it, but it is a light in memory of those that life in Paris.

 

Cracker - Christmas Ornament Challenge 2015
By: Jake Webb
November 28, 2015 · 1,587 views

A Wooden Christmas Cracker which can be a gift box or a reuseable cracker. This project is a little longer than usual as I tried to cover the whole process in detail. My Website: http://www.jwwoodturning.co.uk Folksy page: https://folksy.com/shops/JWWoodturning Music: http://www.purple-planet.com

 

Woodturning Nutcracker 2015 Christmas ornament challenge
By: iturn
November 28, 2015 · 883 views

2015 Christmas ornament challenge hosted by Carl Jacobson & Alan Stratton

 

Cedar and Paulownia Christmas Ornament
By: Danny Shackleford
November 28, 2015 · 741 views

A christmas ornament made of cedar and paulownia turned on the lathe

 

Gnome Christmas Carolers
By: Carl Jacobson
November 27, 2015 · 32,530 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII I turned these gnomes out of Maple, Poplar, Cedar, Walnut and Plywood. This was a fun easy project, and a great Christmas gift as well. If you try this project be sure to let me know! I would love to see some pictures. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/s

 

Christmas Bell for the Challenge 2015
By: Mauro il tornitore
November 27, 2015 · 1,275 views

A Christmas bell between natural fruits. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Una campana natalizia tra frutti naturali. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Grazie. Mauro

 

Woodturning Cherry Christmas My entry for the 2015 Christmas ornament challenge.
By: Templeboy Turnings
November 27, 2015 · 24,399 views

This is my entry to Alan Stratton (as wood turns) and Carl Jacobson's Christmas Ornament Challenge. Turning Cherry Christmas the T-light snowman from a log of Cherry. Pyro face, hat and scarf, and some wooden skew arms and nose !! Hope you enjoy my video entry, Merry Christmas to you and yours, Steve. Music Dance of the Sugar Plum Fairy by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100270 Artist: http://incompetech.com/ Title and credit music http://www.bensound.com/royalty-free-music or 'Music: Song title - Bensound.com' Christmas Ornament Challenge 2015 (Alan Stratton/As Wood Turns) https://youtu.be/KnPEz-X-T34 Christmas Ornament Challenge 2015 (Carl Jacobson)https://youtu.be/F0ssrYgQriE Thank you for watching, If you like what you have seen, please like and share my videos, and if you haven't already please subscribe.

 

How to Make a Festive Christmas Ornament
By: The Russian Woodworker
November 27, 2015 · 388 views

In this video I turn a piece of greenwood and purple heart and turn it into a traditional and futuristic looking Christmas ornament. This is yet another video for the Christmas Ornament Turning Challenge. The music is Force by Allan Walker from NCS: http://nocopyrightsounds.co.uk/video/alan-walker-force-ncs-release/ Enjoy. Eyelet Video: https://www.youtube.com/watch?v gD4uTC76Y8Q Christmas Ornament Challenge: https://www.youtube.com/watch?v F0ssrYgQriE

 

Arte en Torno.. Adorno Navideño ....
By: JOSE ALBERTO GIORDANO
November 27, 2015 · 741 views

Campana navideña hecha en madera de eucalipto blanco y colorado. Creado por : Jose alberto Giordano. Necochea . Argentina. E-mail : jose.giordano123@hotmail.com.ar https://www.facebook.com/photo.php?fbid 850233615054111&set a.497135450363931.1073741826.100002024408012&type 3

 

Making Eyelets for Christmas Ornaments
By: RickTurns
November 25, 2015 · 2,163 views

An easy and quick way to make eyelets for all those Christmas ornaments you're turning!

 

Photo Ornament II
By: micpen22
November 25, 2015 · 274 views

This is the what started me adding lights to my Christmas Ornaments. hope you enjoy the video and please join my page as I will be adding videos throughout the year.

 

Birdhouse Ornament Christmas Ornament Challenge 2015
By: Peter Matthew
November 25, 2015 · 3,703 views

Hi guys! This week I turned another birdhouse ornament for the Christmas ornament challenge. ---------------------------------------------------------- Carl Jacobson: https://www.youtube.com/channel/UCirYSGBqwN5V0wxP72fuUGg Alan Stratton: https://www.youtube.com/channel/UCucYlCYbbf1ZDGO-7OjKl5w Ornament Challenge: https://www.youtube.com/watch?v F0ssrYgQriE Finial Chucky: http://www.rubberchucky.com/store/p6/Finial_Chucky.html Cardinal Birds: http://www.rubberchucky.com/store/p59/Ornament_Birds.html ---------------------------------------------------------- If you would like a sticker, sen

 

2015 Christmas ornament challenge
By: micpen22
November 24, 2015 · 428 views

This is a one-of-a-kind design of a Christmas ornament that I came up with as I was looking at the many different types of sea urgent ornaments out there. I really wanted to make something that no one else has made so this was my idea I hope you like it.

 

Le PicBois #23 - Xmas Lantern
By: Le PicBois
November 24, 2015 · 2,796 views

[ This is my entry for the 2015 Christmas Ornament Woodturning Challenge. I made a lantern out of cherry & wenge wood ] Official playlist of the challenge: https://www.youtube.com/watch?v KnPEz-X-T34&list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Support me on Patreon: https://www.patreon.com/lepicbois Website: http://lepicbois.net/ YouTube: https://www.youtube.com/lepicbois Facebook: https://www.facebook.com/AtelierLePicBois Instagram: http://instagram.com/atelierlepicbois Twitter: https://twitter.com/atelierpicbois Special Thanks: Easy Wood Tools: https://www.youtube.com/user/EasyWoodTools Carl

 

#53 2015 Christmas Ornament Challenge
By: DIY with Uncle Cy
November 24, 2015 · 1,595 views

Here is my entry into the 2015 Christmas ornament Challenge. A Light-up Acorn made with Box elder and Plum. My favorite thing about this time of year is the lights. I don't actually decorate but enjoy seeing what others do. So I decided to do an ornament that lights up.

 

The Balance Tree - Christmas Ornament
By: Be Inspired with Dominic
November 24, 2015 · 1,002 views

With a few days to spare, I present to you my entry to Carl and Alan's Christmas Ornament Challenge, this time mostly done on the lathe. Thanks to those two for the excuse, and to the sponsors for supporting awesome stuff. Enjoy, and remember to be Inspired! Be Inspired! And find everything you did not know you needed on my homepage - http://www.beinspiredwithdominic.com/ 4th Christmas Ornament Challenge - http://www.aswoodturns.com/tag/carl-jacobson/ 'Wish Background' Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0

 

Woodturning: Christmas Ornament II
By: Roundabout Woodworks
November 22, 2015 · 10,745 views

This is a different style of ornament and much easier to hollow if you have a small hollowing tool, or if you don't, one could be made from a hex key (Allen wrench). I suppose you could do without hollowing at all but I prefer to make the ornament as light as possible.

 

Grinch Christmas Ornament
By: Carl Jacobson
November 20, 2015 · 8,981 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII We saw a recycled light bulb painted like this, and thought I would give it a go. My eBay listing http://www.ebay.com/itm/-/221945931152? I upload a new project video every Friday. Thank you for supporting free woodworking Patreon https://www.patreon.com/CarlJacobson Schedule one-on-one online classes jacobson68@yahoo.com Robust Woodturning Tools http://www.turnrobust.com/ Easy Wood Tools http://www.easywoodtools.com/ ChefwareK

 

Woodturning at 54a. #45 A Christmas pencil ornament
By: Keith Barrow
November 20, 2015 · 3,873 views

My take on a Christmas hanging ornament made from just about the last of my pencils! Please support UKIWS www.UKIWS.co.uk

 

Woodturning a Segmented Christmas Ornament #2
By: Fiaschetti Woodworking
November 19, 2015 · 12,049 views

Please visit my new website http://www.fiaschettiwoodworking.com/ In this video I make a segmented Christmas ornament out of walnut, sapele, maple, and padauk. It consists of 507 pieces. The finish is 3 coats of 50/50 boiled linseed oil and poly, and 5 coats of poly and 1 with poly and mineral spirits. Thank you for watching Any questions please email me at fiaschettiwoodworking@gmail.com

 

rustic
By: Steve Krumanaker
November 19, 2015 · 1,090 views

Very rustic birdhouse Christmas ornament. Fun and fast, easy project

 

Ornament exp. #2 Success!
By: Rich McNatt
November 19, 2015 · 390 views

 

Woodturning: Cedar Ornament (Part One)
By: Roundabout Woodworks
November 18, 2015 · 1,716 views

This is part one of the sequence. The ball of the ornament is turned and hollowed. I use a skew chisel and I did not edit out the catches! I would've liked to upload a single video, but it was too big. The wood used is red cedar.( After uploading I realized I don't show the completed ornament, so you'll have to look on my facebook page, or find the google post, if you want to see the finished ornament. Sorry.)

 

Woodturning: Cedar Ornament (Part Two)
By: Roundabout Woodworks
November 18, 2015 · 1,426 views

This is part two of the sequence. Both the top and bottom finials are turned. I use a skew chisel mostly, but a spindle gouge is used for the top finial. I would've liked to upload a single video, but it was too big. The wood used is red cedar.( After uploading I realized I don't show the completed ornament, so you'll have to look on my facebook page, or find the google post, if you want to see the finished ornament. Sorry.)

 

My first Christmas Ornament was a Challenge / Reto de Adorno Navideà o.
By: Eme SantosH Creations
November 17, 2015 · 698 views

My first Christmas Ornament Challenge and first Plate, for keys, candies or simple ornament, it's made in Marupa wood AKA (Stavewood) with polyester resin and glitter mix inlay and color pencils. This wood it's not good for turning. Thank you to Carl Jacobson andAlan Stratton and the Sponsors. Mi Primer reto de adorno navideño y mi primer Plato, para las llaves, caramelos o la simple un adorno, está hecho en madera marupá, inserto con mezcla de resina de poliéster, brillo y lápices de colores. Esta madera no es buena para el torneado. My Social Media Facebook: https://www.facebook.com/CuchumilDetallesbyEme Instagram: @emesantoss / @designedbyeme Twitter: https://twitter.com/designedbyeme https://twitter.com/cuchumildetalle Eme ( _ ) Always smile!!! Music Bright_Future by Silent Partner youtube audio library

 

Turning a Hollow Ornament with Tim Voellinger
By: Show Me Woodturners
November 17, 2015 · 156 views

Turning a Hollow Ornament with Tim Voellinger

 

Wood Turning a Victorian Ornament
By: SP Wood Art
November 16, 2015 · 6,235 views

I am surprised at how many holiday traditions my family engages in each year that derives from the Victorian era. So, to celebrate these wonderful times of the year I wood turned a Victorian ornament from a scrap piece of ash wood. I will also be submitting this video to Carl Jacobson and Alan Stratton's annual Wood Turning Ornament challenge. Refer to the below link if your interested in submitting a video: http://www.aswoodturns.com/challenges/christmas-ornament-2015/ If you would like see more of SP Wood Art visit us at: www.spwoodart.com www.facebook.com/spwoodart www.plus.google.com/

 

bh7
By: Steve Krumanaker
November 15, 2015 · 102 views

Drilling the mounting hole for a turned bird on the perch for a birdhouse ornament.

 

bh14
By: Steve Krumanaker
November 15, 2015 · 150 views

The finished ornament.

 

bh13
By: Steve Krumanaker
November 15, 2015 · 169 views

birdhouse ornament

 

bh12
By: Steve Krumanaker
November 15, 2015 · 186 views

Assembling a wood turned bird for a Christmas ornament.

 

bh11
By: Steve Krumanaker
November 15, 2015 · 137 views

wood turning the head for a tiny bird

 

bh10
By: Steve Krumanaker
November 15, 2015 · 153 views

Turning and drilling the body for a wood turned bird for a Christmas ornament

 

bh8
By: Steve Krumanaker
November 15, 2015 · 128 views

fitting the perch

 

bh6
By: Steve Krumanaker
November 15, 2015 · 108 views

Making and fitting the perch for a birdhouse Christmas ornament.

 

bh5
By: Steve Krumanaker
November 15, 2015 · 146 views

Making the bottom finial for a classic birdhouse ornament.

 

bh4
By: Steve Krumanaker
November 15, 2015 · 122 views

Finished lid and body for a traditional birdhouse ornament.

 

bh3
By: Steve Krumanaker
November 15, 2015 · 134 views

Using a jamb chuck to finish turn and sand the roof for a traditional birdhouse ornament.

 

bh2
By: Steve Krumanaker
November 15, 2015 · 231 views

Unedited Video of turning a roof for a traditional Birdhouse Christmas ornament.

 

bh1
By: Steve Krumanaker
November 15, 2015 · 362 views

Unedited video of making a body for a classic birdhouse ornament. There are some good shortcuts displayed in this video.

 

2015 Misfit Ornament
By: Erick Wood
November 15, 2015 · 457 views

Lantern Ornament made from Mahogany, Walnut, and Maple. Follow us on Facebook @ WoodShed Designs https://www.facebook.com/WoodShed-Designs-142003032560268/?ref aymt_homepage_panel Official playlist https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd

 

Wood Inlay Ornament - Christmas Ornament Woodturning Challenge / 2. Entry
By: Fabian's Tiny Workshop
November 15, 2015 · 16,842 views

Scroll Saw meets Wood Lathe! This is my second entry for the 2015 Christmas Ornament Woodturning Challenge hosted by Alan Stratton and Carl Jacobson For more information on this challenge visit https://youtu.be/F0ssrYgQriE https://youtu.be/KnPEz-X-T34 Enter Your Ornament at www.AsWoodTurns.com/Challenges Official Challenge Playlist at: https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Alan Stratton http://www.AsWoodTurns.com Carl Jacobson http://www.thewoodshop.tv Support me on Patreon: https://www.patreon.com/FabiansTinyWorkshop

 

Woodturning christmas challenge 2015 by Marc
By: Marc 's Oneway of turning
November 14, 2015 · 892 views

My small project for the challenge. By the way, my wife will bring the project to work.

 

Ornament Callange entry #2 Contest edit
By: Rich McNatt
November 14, 2015 · 591 views

 

Barry's First Ornament - 2015 Christmas Ornament Woodturning Challenge
By: Barry's Workshop
November 13, 2015 · 2,761 views

This is my first attempt at woodturning a Christmas Ornament. The woods for the globe are maple and redheart. The finial is ebonized fir. For more info about the challenge, visit here: https://www.youtube.com/watch?v KnPEz-X-T34 http://www.aswoodturns.com/challenges/ Big thanks to Alan Stratton and Carl Jacobson for sponsoring this challenge. I've only been turning a few months, and this prompted me to do several new things (like reverse turning). It has been a good experience and I'm happy to be able to contribute. The holiday music in this video is from audionautix.com. Released under Creative Commons License 3.0.

 

Salvaging My Christmas Bell Ornament
By: As Wood Turns
November 12, 2015 · 4,464 views

http://www.AsWoodTurns.com This Christmas bell is turned from maple about 2 inches in diameter and three inches tall. It is finished with colored artists pens and lacquer. It started life as a hollowed bulb ornament. However, one end got too thin. My salvage efforts resulted in a bell. While I'm happy with the bell, I'm always disappointed when I turn a wall too thin. See our Christmas Ornament Woodturning Challenge at https://youtu.be/KnPEz-X-T34 This year's Challenge Playlist for all ornament video submissions is at https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd

 

Classic Birdhouse Christmas Ornament.......No Vacancies
By: Steve Krumanaker
November 12, 2015 · 30,747 views

Heavily Edited video of how I make a Birdhouse Christmas Ornament. Many thanks to Carl and Allen and to the many other youtube authors I've learned and gotten ideas from. To see the uncut version of making this birdhouse ornament click on this link https://www.youtube.com/playlist?list PLaJ6DtPO-6L91WKID71kLk6Hb6aTWU6ZD Merry Christmas to all and thanks for watching! Steve

 

Ornament experiment
By: Rich McNatt
November 12, 2015 · 381 views

 

Christmas ornament for the Challenge
By: Mauro il tornitore
November 11, 2015 · 38,806 views

This is my second contribution to the 2015 Christmas Ornament Woodturning Challenge issued by Alan and Carl. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. A great thank to Alan and Carl for the opportunity. Mauro Questo è il mio secondo video per il Concorso Ornamenti Natalizi fatti al tornio 2015. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al canale fate una cosa gradita. Un grande ringraziamento ad Alan e Carl per l'opportunità fornita. Mauro

 

How to Turn Ebony Scrap into A Christmas Ornament
By: The Russian Woodworker
November 11, 2015 · 536 views

In this video I show how I turned a piece of ebony into a beautiful Christmas ornament. I also show a piece of walnut, which I carved a snowman into. Both of which I will enter into the Christmas Ornament challenge. Enjoy. Enter Your Ornament at www.AsWoodTurns.com/Challenges The song I used is Fade by Alan Walker from NCS: http://nocopyrightsounds.co.uk/video/alan-walker-fade/ Official Challenge Playlist https://www.youtube.com/playlist?list...

 

Flash-Light-House -- Christmas Ornament Challenge 2015
By: PeteTGIF
November 11, 2015 · 3,004 views

Flashlight Cover, Lighthouse shaped! ------------------------------------------------ The lighthouse like Jesus guides you in times of darkness. That's the reason why I chose it as my entry for this year's Christmas Ornament Challenge by Alan Stratton and Carl Jacobson. ------------------------------------------------ Thanks to Alan and Carl for challenging us to show our ideas of a Christmas Ornament. Like in the past years it was great fun to turn something and sharing it with the world. ----------------------------------------------- This is the shortened version for to be judged. The full

 

Flash-Light-House
By: PeteTGIF
November 11, 2015 · 2,384 views

Flashlight Cover, Lighthouse shaped! This Flashlight Cover will be my entry for this year's Christmas Ornament Challenge by Alan Stratton and Carl Jacobson. As this Version might be a little long, due to my detailed explanations, there'll be a short Version for the Judges and the ones without patience released later today. I used some carving to get the texture of a brick lighthouse to the base. On top of that, this was the first time I tried my new camera, what do you think of the pictures and the sound? I think it had been worth investing. ------------------------------------------------ You

 

woodturning christmas ornament challange 2015
By: Gary Harris
November 10, 2015 · 1,933 views

This is a oak snowman for the christmas ornament challage 2015 hope you enjoy

 

wood de bois tournage d un sapin (christmas ornament )
By: bovitch bov
November 08, 2015 · 3,111 views

wood de bois tournage d un sapin décoration de noël

 

Christmas ornament contest 2015 UFO ornament
By: Living Wood Creations -wood turning videos-
November 08, 2015 · 556 views

My entry for the Christmas ornament contest of 2015 this is my UFO ornament If you would like to contact me my email is livingcreationsturning@gmail.com Thanks LWC

 

#38 2015 Christmas Ornament (short version)
By: Yuval Lahav Woodturning
November 07, 2015 · 7,071 views

This is my submission to the 2015 Ornament Challenge, again this year, issued by Carl Jacobson and Alan Stratton. This is the short version, if you want to check out the much longer version, you can find it here: https://youtu.be/dl03bVxO9DM Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Katy Kirby - Come Back to Nashville Josh Woodward - Thanks For Coming All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

#37 2015 Christmas Ornament (full version)
By: Yuval Lahav Woodturning
November 07, 2015 · 34,471 views

This is my submission to the 2015 Ornament Challenge, again this year, issued by Carl Jacobson and Alan Stratton. This is the long version, if you want to check out the much shorter version, you can find it here: https://youtu.be/6_GbpGRTSG0 Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ Songs in this video are: Katy Kirby - Come Back to Nashville Josh Woodward - Thanks For Coming The Mind Orchestra - The Minoan MC Cullah - A Place I Know Katy Kirby - Every Time All are available for free from http://www.freemusicarchive.org Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!

 

Woodturning Stave Segmented Pen Blank Christmas Ornament
By: As Wood Turns
November 05, 2015 · 13,050 views

http://www.AsWoodTurns.com This is another ornament for this year's Christmas Ornament Woodturning Challenge The ornament's body consists of eight 'exotic tropical hardwood' pen blanks cut in stave fashion with strips of padauk between each. Each pen blank was ripped at a 22.5 degree angle. The ornament's top and bottom are walnut. The ornament is finished with Myland's Friction Polish. See our challenge at https://youtu.be/KnPEz-X-T34 This year's Challenge Playlist for all ornament video submissions is at https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Prizes will

 

Christmas Ornament Challenge
By: David K
November 05, 2015 · 2,403 views

My entry for the Christmas Ornament Challenge 2015 by Carl Jacobson and Allan Straton. I want to thank both of them for the time they are spending to provide us with this fun little project! Here is the link for all Ornaments http://www.aswoodturns.com/challenges/christmas-ornament-2015/ This is my first video and i plan on doing more in the future!! Please leave a comment and if you want to see more, a subscription would be greatly appreciated https://www.facebook.com/davidkoessler ____________ Almost in F - Tranquillity von Kevin MacLeod ist unter der Lizenz Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) lizenziert. Quelle: http://incompetech.com/music/royalty-free/index.html?isrc USUAN1100394 Interpret: http://incompetech.com

 

Wood Turning Another Really Fast Inside Out Ornament
By: Jerry Paul
November 01, 2015 · 31,364 views

Here's another high speed / no narration inside out ornament I've just taken off the lathe. If you don't want to hear the background music, just turn the sound down... you won't be missing anything else. lol OH! - And this ornament gets something new... (to me, anyway) You won't believe your eyes!!! hahaha ... Yes you will,... I've just noticed that that phrase is a pretty effective hook on some social media sites that shall remain nameless. hahahahaha Hope you enjoy the video. It was a fun ornament to turn, although the glue up was a bit tedious. lol Cheers!

 

Turning the bottom of a rough log section.
By: Turning Round
October 29, 2015 · 506 views

This is a short video of wood turning I turn a log section to flatten the bottom. The log was very warped and cracked and need a bit of attention. This is for a Christmas decoration for a friend. The chunk of wood was then used as a table decorations

 

Woodturning Hollow Christmas Ornament With Wood Burning
By: As Wood Turns
October 29, 2015 · 7,645 views

http://www.AsWoodTurns.com This ornament is my first for this year's Christmas Ornament Woodturning Challenge. It is cherry with the bulb about 2 inches in diameter plus about 1 inch integral finial. I hollowed the bulb by cutting it in half, hollowing the two halves, and gluing it back together. It is finished with shellac friction polish. For decoration, I turned several v-grooves and woodburned (pyrography) some random designs. I then sanded the burned areas before finishing and buffing the ornament. Enter your ornament video at http://www.AsWoodTurns.com/Challenges. There's still lots of time before the deadline of November 30, 2015. Good turning. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Music: Bach Guitar Calm under license via Adobe Premiere Elements Smart Sound.

 

Christmas Ornament Woodturning Challenge
By: Fabian's Tiny Workshop
October 28, 2015 · 5,461 views

This is my entry for the 2015 Christmas Ornament Woodturning For more information on this challenge visit https://youtu.be/F0ssrYgQriE https://youtu.be/KnPEz-X-T34 Enter Your Ornament at www.AsWoodTurns.com/Challenges Official Challenge Playlist at: https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Alan Stratton http://www.AsWoodTurns.com Carl Jacobson http://www.thewoodshop.tv Support me on Patreon: https://www.patreon.com/FabiansTinyWorkshop

 

Turning A Birdhouse Ornament with Jim Akins.
By: Show Me Woodturners
October 27, 2015 · 613 views

Turning A Birdhouse Ornament with Jim Akins.

 

#19 Wood Turning a Christmas nutcracker ornament
By: Tommy Akridge Designs
October 22, 2015 · 23,547 views

Getting ready for Christmas with a nutcracker

 

Woodturning with Tim Yoder-Laser Kit Christmas Ornament
By: woodturningwithtim1
October 22, 2015 · 2,924 views

Just in time for the Holidays, a Christmas ornament that is the perfect gift or to hang on your tree for years to come. Use your skills from the Finial Box project to turn a beautiful finial for your ornament!

 

Woodturning A Quick Inside Out Ornament Really Quickly
By: Jerry Paul
October 19, 2015 · 326,397 views

In an effort to streamline ornament production, I've been making a few single-block ornaments. This time I thought I'd try to do a quick inside out ornament from a small piece of Mountain Ash. My previous video seemed to do well in that format, so I've done it like that again. - High speed, no narration. I've done some inside out pieces before, but just to see if I could. This is my first inside out ornament other than that.

 

The Turning Shed: Halloween Special!!
By: The Walnut Log Studio
October 19, 2015 · 795 views

We have a spooktacular project this week, it's almost Halloween and time to make some decorations...A Halloween Tree!! My inspiration came from a bottle stopper tutorial I found that was put out by Craft Supplies a few years ago. Using those stoppers as a template, I scaled the ghosts and hats down to turn them into ornaments. You'll see every step in this project including how to make your own cobwebs. I've also issued a turners challenge to see how many other turners I can get to make something Halloween themed. Please email me your pieces and I'll include them in my next video. ema

 

Ornament challenge 2015 Deer
By: Rich McNatt
October 16, 2015 · 1,381 views

This my entry to the 2015 Ornament challenge

 

2015 Christmas Ornament Woodturning Challenge
By: As Wood Turns
October 14, 2015 · 5,561 views

http://www.AsWoodTurns.com Enter Your Ornament at www.AsWoodTurns.com/Challenges Official Challenge Playlist at: https://www.youtube.com/playlist?list PL4W9FE566kZgvJVxPKGpzOJOkOQ_goWjd Sponsors - Craft Supplies USA –www.woodturnerscatalog.com - Robust Woodturning Tools - www.turnrobust.com - Chefware Kits - www.chefwarekits.com - Pony Tools Inc. – www.ponytools.com - Easy Woodtools - www.easywoodtools.com -Lyle Jamieson - http://lylejamieson.com -Hunter Tools - http://huntertoolsystems.com -Konifer Watch - www.koniferwatch.com 4th Annual Christmas Ornament Woodturning Challenge Rules and

 

Wood Turning a Very Quick Ornament
By: Jerry Paul
October 12, 2015 · 7,569 views

I've been busy with some outside work lately and haven't had a chance to get a video out for a while. I was coming down with a head cold while I made this, so there is no narration.. just turning... in high speed. (I just HAD to turn SOMETHING! - and I just wanted to get it done.) The wood I used was Mountain Ash.

 

Very Special Christmas Ornament Kits
By: Ron Brown
October 07, 2015 · 1,299 views

Laser Cut Christmas Ornament Kits offered as a special seasonal discount. Make very unusual Christmas Ornaments, Hollow Forms, Bottle Stoppers, etc. with these innovative kits for wood turners made with a CO2 laser.

 

A Rocket Ship Christmas Ornament
By: RickTurns
October 02, 2015 · 2,779 views

With only a couple of scraps of wood, turn a rocket ship Christmas ornament! It's quick, it's easy, and it ain't rocket science. Sound effects from Freesound.org and Soundbible.com. The referenced video (woodturning a rocket ship) by Rick McQuay is at: https://www.youtube.com/watch?v FgEWtjx2ohk#action share

 

Woodturning a Winged Lacewood wall ornament video #2
By: Templeboy Turnings
September 23, 2015 · 1,522 views

My second video showing the process of turning a winged wall platter. I dedicate this video to my late father !! music: http://www.bensound.com/royalty-free-music (thank you)

 

Ornament
By: Joseph Watson
August 27, 2015 · 215 views

Turning ornaments and trying out video editing. #woodturning

 

Tannenbaum drechseln - Weihnachten kommt bestimmt
By: Drechseln mit MP Martin Preller
July 30, 2015 · 28,048 views

über YouTube Capture

 

Woodworking: Ornament display jig for photography
By: nazarethwoodshop
July 27, 2015 · 267 views

A boom arm stand made entirely of scrap wood used to start fires. The purpose is to display ornaments to photograph them suspended in the air.

 

Segmented, Scrolled and Turned Christmas Ornaments (part 3) by Dan Douthart
By: Gwinnett Woodworkers
June 10, 2015 · 6,006 views

This is part three of a series of videos on how to make 4 segment Christmas ornaments starting with scrolling the segments. Recorded and presented in HD. A handout is available from: http://gwinnettwoodworkers.com/images/Handouts/3D_Segmented_Scroll_Sawed_and_Turned_Ornaments.pdf Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Segmented, Scrolled and Turned Christmas Ornaments (part 4) by Dan Douthart - turning
By: Gwinnett Woodworkers
June 09, 2015 · 4,002 views

Part four covers several pattern types that look especially good with this technique. Dan demonstrates how he turns a prepared 4 segment scrolled ornament. A handout is available from: http://gwinnettwoodworkers.com/images/Handouts/3D_Segmented_Scroll_Sawed_and_Turned_Ornaments.pdf Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Segmented, Scrolled and Turned Christmas Ornaments (part 2) by Dan Douthart
By: Gwinnett Woodworkers
June 09, 2015 · 4,430 views

This is part two of a series of videos on how to make 4 segment Christmas ornaments covering how use your computer to make patterns for the 4 segment ornaments. Recorded and presented in HD. A handout is available from: http://gwinnettwoodworkers.com/images/Handouts/3D_Segmented_Scroll_Sawed_and_Turned_Ornaments.pdf Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Segmented, Scrolled and Turned Christmas Ornaments (part 1) by Dan Douthart - Intro
By: Gwinnett Woodworkers
June 09, 2015 · 6,799 views

This is part one of a series of videos on how to make 4 segment Christmas ornaments starting with scrolling the segments. Recorded and presented in HD. A handout is available from: http://gwinnettwoodworkers.com/images/Handouts/3D_Segmented_Scroll_Sawed_and_Turned_Ornaments.pdf Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Wood turning ornamental mushroom beech
By: iturn
June 09, 2015 · 335 views

https://m.facebook.com/iturnuk

 

Woodturning An Ornament Or Birdhouse Stand
By: As Wood Turns
June 04, 2015 · 3,245 views

http://www.AsWoodTurns.com In preparation for this year's Christmas Ornament Woodturning Challenge, I decided to make my own ornament stand. It could also be used for a birdhouse or any other small hanging. It is surprizingly easy to make. The base is scrap wood from another project. The brass is 1/16' diameter brass rod but should be heavier such as 1/8' diameter to be less bouncy. This stand is finished with Mylands Friction Polish. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Photo ornament
By: micpen22
December 25, 2014 · 130 views

Christmas Ornament Video held off posting this until now do to the fact that they are for my wife for Christmas

 

Woodturning a Segmented Christmas Ornament 2014
By: frank howarth
December 24, 2014 · 114,092 views

With this ornament, I wanted to bring wood from two different trees on our property together. The Ornament would be a sphere with birch wood on the upper half and Deodar Cedar on the bottom half. The two woods would come together in a zigzag pattern in the middle.

 

Woodturn A Holiday Star
By: As Wood Turns
December 23, 2014 · 5,214 views

http://www.AsWoodTurns.com To wind up the Christmas season, peace on earth seems to be further away than in year's past. I hope this ornament can symbolize a quest for peace on earth as well as a reminder of Jesus Christ for those who believe in Him. May we have more tolerance for others and work toward peace on earth. This star is maple with a background of red oak. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Woodturning a Xmas Decoration from Jarrah
By: MrD Burke
December 22, 2014 · 158 views

Woodturning is an ideal hobby for mking use of 'left-over' pieces of timber. What would usually be considered scrap after a regular project is complete could be the perfect stock for a turned project. I decided to try making a xmas decoration using a small piece of left over jarrah from a student project from 2008. Yes, I kept the scrap that long! while turning this project i encountered a dreaded woodturning mishap - a broken project. However, in this instance I did figure out a way to recover from it which I am pretty proud of and the resulting project was well worth the effort. I hope you find the video interesting, educational & helpful.

 

2014 Christmas Ornament Woodturning Challenge Results
By: As Wood Turns
December 18, 2014 · 2,980 views

http://www.AsWoodTurns.com At last, we're announcing the results for this year's challenge. The response has been amazing -- Thank you all. Here's a link to the challenge playlist http://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Congratulations to our finalists. Everyone for whom we have an email address will also receive a certificate for their participation. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns Sponsors for the Christmas Ornament Challenge ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolwork s.com/ Crabtree Tools http://toolsbycrabtree.com

 

Woodturning A Christmas Tree Ornament
By: The Small Workshop
December 16, 2014 · 13,845 views

If you enjoyed this video please subscribe, it's free and will allow you to see my future uploads. I try to add new content every week. I've saved the trunk of last year's Christmas tree, thinking I'll make something out of it... sometime... yes I know, I'm a hoarder! Anyway, I thought a nice purpose for it will be to turn small Christmas trees to use as decorations. And in this video you can see the making of the first, and probably last, of them. While this seemed like a great idea at first, in practice it proved to be not so good. The wood is soft and brittle and full of

 

Pendagli per l'albero di Natale
By: Livio Maritati
December 15, 2014 · 3,144 views

Arriva il Natale e c'è da addobbare l'albero. Ecco come renderlo unico ed originale con i pendagli decorativi ed ecologici preparati con grande pazienza da mio instancabile socio australiano.

 

Woodturn An Acorn Christmas Ornament
By: As Wood Turns
December 12, 2014 · 4,092 views

http://www.AsWoodTurns.com I want to add another simple ornament to this year's Christmas Ornament Woodturning Challenge. This is an acorn made from walnut and elm. It is very light since I hollowed the inside. It is about 1' in diameter an over 1 inch long. My acorn is finished with shellac friction polish. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

2014-12-08 Turned Christmas Ornaments quick,easy, cheap - globe
By: Gwinnett Woodworkers
December 10, 2014 · 11,843 views

This video demonstrates turning of attractive Christmas ornaments using simple pine and tools that many beginning turners would already have. This first video of the pair shows how to turn several of the globes at once using a pen mandrel. A PDF handout accompanies this available from this link https://www.dropbox.com/s/8a9sy7wpw8osl9w/Christmas%20Tree%20Ornaments%2C%20A%20Quick%20and%20Easy%20Method.pdf?dl 0 Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

2014-12-08 Turned Christmas Ornaments quick,easy, cheap - finial and icicle
By: Gwinnett Woodworkers
December 10, 2014 · 17,029 views

This video demonstrates turning of attractive Christmas ornaments using simple pine and tools that many beginning turners would already have. This second video of the pair shows how to turn the finial and icicle. A PDF handout accompanies this available from this link https://www.dropbox.com/s/8a9sy7wpw8osl9w/Christmas%20Tree%20Ornaments%2C%20A%20Quick%20and%20Easy%20Method.pdf?dl 0 Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

Woodturn A Molecule Christmas Ornament
By: As Wood Turns
December 05, 2014 · 13,787 views

Christmas Ornament Woodturning Challenge 2014 playlist http://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ http://www.AsWoodTurns.com This year I really wanted to make this ornament, a maple globe with orbiting padauk resembling a molecule or, in a stretch, a planet with moons. This one was fun. I started with 5 segmented rings of 12 segments each: 4 maple and 1 padauk. Then I sliced the padauk into 6 slices but only used 5 of the slices. At this point my segment count is 108. But wait there's more. After gluing into a ball, I sliced the ball 4 times and inserted one thin

 

Lightsaber Follow-up/Christmas Ornament Challenge
By: Carl Jacobson
December 01, 2014 · 4,863 views

This is the follow-up video for the Lightsaber! I made Friday. I did some inside out turning on the staff, so the light would shine through. Sterling Davis https://www.youtube.com/user/SterlingsWoodcrafts Christmas Ornament Playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Sponsors for the Christmas Ornament Challenge ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolworks.com/ Crabtree Tools http://toolsbycrabtree.com/ Ways you can support the show

 

woodturning off center ornament
By: Peter Matthew
November 30, 2014 · 867 views

this ornament didn't come out perfect but i think its a nice little project that you can get done in an hour or so. I used maple burl and cherry for mine.

 

JND Woodturning: Christmas Ornament
By: Jesse DiMura
November 30, 2014 · 348 views

Christmas Ornament made out of Flame Box Elder

 

Christmas Ornament with Plexiglass
By: Glen Clark
November 30, 2014 · 523 views

Christmas Ornament with Plexiglass top and bottom

 

Christmas Ornament
By: Jerry Brown
November 30, 2014 · 248 views

Who else can turn 5 pieces of good scrap wood into a little old dragon themed ornament :)

 

Entry for the 2014 Christmas Ornament Challenge -- Christmas-Star-Bowl
By: PeteTGIF
November 29, 2014 · 1,114 views

As there are all the awesome decorations for Christmas out this year, I thought to give credit to the work Santa's making. I hope he'll enjoy this year's cookies from my Christmas-Star-Bowl. Segmented bowl out of beech, 8 segments. Overall dimensions: 10'' by 1.9'', including the rays and the foot. Inner dimensions of the bowl app 4.5'' by 1.5''. Sanded to 600 grid and finished with sanding sealer and a food safe mixture from bees- and canauba wax. Special thanks to the ones who challenged us this year: Alan Stratton from As Wood Turns: https://www.youtube.com/user/AsWoodTurns Carl Jacobson

 

Celtic Knot Christmas Ornament
By: Derek Oliver
November 29, 2014 · 1,285 views

A Christmas ornament with three celtic knots. The celtic knot on the globe is a six strand knot and the two knots on the finials are three strand knots.

 

Birdhouse Ornament Part 2 of 2
By: Bob Hamilton
November 28, 2014 · 8,891 views

Carl and Alan are trying to get folks to upload Christmas ornament videos so I finally forced myself to sit down at the computer long enough to edit some video. This is one is a whimsical birdhouse style ornament turned from walnut and box elder. Ooops! I guess I was kind of hurrying through the editing and didn't catch the part where I stopped to sharpen the parting tool. That is the kind of 'dead time' that I usually chop out, but I missed this one. Sorry about that!

 

Birdhouse Ornament Part 1 of 2
By: Bob Hamilton
November 28, 2014 · 7,934 views

Carl and Alan are trying to get folks to upload Christmas ornament videos so I finally forced myself to sit down at the computer long enough to edit some video. This is one is a whimsical birdhouse style ornament turned from walnut and box elder.

 

Woodturning a hollow Christmas bauble
By: Sam Coeck
November 28, 2014 · 377 views

Woodturning a hollow Christmas bauble from pear wood. I basically turn it as a small thin hollow form with a small opening and a cap. No glue or other chemicals used.

 

Woodturn A Sputnik Sea Urchin Christmas Ornament
By: As Wood Turns
November 27, 2014 · 2,798 views

http://www.AsWoodTurns.com This ornament displays a sputnik sea urchin shell on finials of walnut and a tropic hardwood. The sea urchin shell is prepared by coating the insides with white glue and sanding the holes perfectly round. The finials are finished with shellac friction polish. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Christmas Ornament Segmented Challange
By: Glen Clark
November 26, 2014 · 296 views

Segmented Christmas Ornament for the Challenge giving by Carl Jacobson and Allan Stratton. Thanks for watching. Still learning my video editing software and self directing...

 

Christmas Ornament Wood Turning Challenge, My Crazy attempt.
By: Turning Round
November 25, 2014 · 16,791 views

This is my attempt to make a Christmas Ornament for the 2014 Christmas Ornament Wood Turning Challenge. I think I captured the spirit of have some fun with the video, and I also tried to do something a bit different. I am not sure who else would try to save a clump of hardened resin from a couple of year old can of resin. This goes along with my scrap bin challenge take a look at this video when you have an extra few minutes. http://youtu.be/DxjCcc2o5MI I have also launched a new Etsy Store front, take a look and if you like it please add it to your favorites in your Etsy store. https://www.etsy.com/shop/TurningRound?ref hdr_shop_menu

 

2014 Christmas Ornament Challenge, Second entry
By: Yuval Lahav Woodturning
November 25, 2014 · 3,023 views

My second entry to Carl's and Allen's 2014 Christmas Ornament turning challenge! Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ I wanted to credit the music in my video, all the songs were download from http://www.freemusicarchive.org/, a site that gives access to free music, I'm not affiliated with them, or were asked to do this, I just thought it fair, and also if someone wanted to get the music in the videos for themselves, now they can do so, so the songs in order are: Jonathan Mann - 'All The Ice King Wants For Christmas' Wiredrawn - 'Christmas Wish No. 3571' Dott - 'This Christmas' Snowy O. McSnowerson and the Oh So Snowly Snowers - 'Feliz Navidad' Hope y'all enjoy this video, and have a merry Christmas and happy holidays!!

 

Woodturning Christmas Ornament
By: Peter Matthew
November 25, 2014 · 691 views

This ornament is my second entry to this year's ornament challenge. I turned mine out of cherry and maple and used butcher block conditioner as a finish.

 

Acorn ornaments
By: micpen22
November 24, 2014 · 1,093 views

Christmas Ornament, for the Allen and Carl Challenge

 

Small Black Walnut Ornament
By: Glen Clark
November 23, 2014 · 374 views

Sorry not much talking, Just a single position. Using a Nikon CoolPix. Lightworks video software. old Craftsman Lathe.

 

My Entry for the 2014 Christmas Ornament Woodturning Challenge
By: The Weekend Woodturner
November 22, 2014 · 517 views

 

Hunter#1OrnamentTool and Tolly Measuring Tools
By: Vinces WoodNWonders
November 22, 2014 · 1,435 views

The Hunter#1OrnamentTool and Tolly Measuring Tools are perfect for turning and measuring ornament globes! Thank you for watching!

 

2014 ORNAMENT CHALLENGE
By: Lou VanDyne
November 22, 2014 · 23 views

2014 ORNAMENT CHALLENGE

 

Christmas Lights
By: Carl Jacobson
November 21, 2014 · 13,372 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII OK, That was a little more than a design change. These little lights are a great way to use up scraps, and fun to turn. Christmas Ornament Playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Sponsors for the Christmas Ornament Challenge ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolworks.com/ Crabtree Tools http://toolsbycrabtree.com

 

Three Sided Inside Out Christmas Ornament
By: As Wood Turns
November 21, 2014 · 10,234 views

http://www.AsWoodTurns.com I wanted to turn another inside-out ornament for this years Christmas Ornament Woodturning Challenge. But I also wanted it to be a little different than before. So, this inside-out ornament is a three sided ornament which presents a little more of a challenge because the stave angles are different and harder to get right. This is made from three pieces of walnut ripped at 60 and 120 degrees. They are temporarily fastened together while turning the inside cavity. With that cavity finished, the staves are taken apart, rotated and permanently glued back together again.

 

Christmas globe in green
By: Steve Krumanaker
November 21, 2014 · 859 views

I created this video with the YouTube Video Editor (http://www.youtube.com/editor)

 

Bottle Stopper Christmas Ornament
By: Weekend Wood Dust
November 21, 2014 · 520 views

My entry into the 2014 Christmas Ornament Wood Turning Challenge. Here's a link to the challenge playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ

 

Wood Turning - Christmas Ornament Challenge
By: Mike Waldt
November 20, 2014 · 37,202 views

My entry for the Christmas Ornament Challenge, organised by Carl Jacobson and Alan Stratton. I'll be using Lime for the body, and Purple Heart for the finials. Guitar by Michael Berk: https://www.youtube.com/user/mikeberk810

 

How to make the Champagne Bottle Ornament
By: Daniel Vilarino
November 20, 2014 · 440 views

Hi, This is a separate video containing a presentation explaining how to make the champagne bottle ornament. I decided to post it as a separate video because the lenght of the process was getting too long. If you follow these plans, please leave more space for the base threading and relief cut. Otherwise it might prove difficult to get even a couple of threads. I want to give a shout to Sam Angelo, the wyoming woodturner, I learned how to do thread chasing watching his videos, and he is a master for doing this. I hope you enjoy the video, and if you do, please like it, subscribe and comment. If for any reason you do not like it, and decide to give it a thumbs down, that is ok, but please, also comment and say what you did not like. I strive to do the best in my videos and criticism is always welcome. Cheers! Daniel

 

2014 Christmas Ornament Challenge 3rd Entry DRV
By: Daniel Vilarino
November 20, 2014 · 1,642 views

Hi! This is my third entry to the 2014 Christmas Ornament Challenge presented by Alan Stratton and Carl Jacobson. I have another video containing the presentation of how I made this ornament. I will post it soon and link this video to that one. I tried something new in this one, some thread chasing, first time I do it. I guess I will have to practice quite some more before getting to the level of Sam Angelo and many other woodturners that master this technique. Still, though a bit tight, the threads worked!! I could not film the part in which I made the perforations in the body of the bo

 

Wood Turning #94 Texted A Challenged Christmas Ornament
By: The Tiny Trailer Workshop
November 20, 2014 · 2,022 views

Well here is another way to use up some more of that Scotch Broom! Having the branch growing in just that right spot made this an ideal piece! This piece is probably 25 or 30 years old and is starting to show its age! Because the core has darkened over the years... it made it very easy to use ebony as a filler. As a matter of fact... chances are that if you saw it in person... you probably wouldn't notice it... even if you knew it was there! Cap'n Eddie's shine juice was always a favourite of mine in the early years of my turning. But I am afraid that I haven't gotten around to getting any of

 

Wood Turning #94 A Challenged Christmas Ornament
By: The Tiny Trailer Workshop
November 20, 2014 · 6,975 views

Well here is another way to use up some more of that Scotch Broom! Having the branch growing in just that right spot made this an ideal piece! This piece is probably 25 or 30 years old and is starting to show its age! Because the core has darkened over the years... it made it very easy to use ebony as a filler. As a matter of fact... chances are that if you saw it in person... you probably wouldn't notice it... even if you knew it was there! Cap'n Eddie's shine juice was always a favourite of mine in the early years of my turning. But I am afraid that I haven't gotten around to getting any of

 

Xmas Ornament 2
By: Cody W
November 20, 2014 · 286 views

In this, my second submission to the contest, I make an ornament made out of cedar and cherry.

 

Ornament challenge
By: Wood4turning
November 18, 2014 · 130 views

 

Segmented Christmas Ornament ( Long version)
By: The Woodshop
November 17, 2014 · 4,997 views

Segmented Christmas ornament, I turned a little segmented ornament. It's Zebra wood, Padauk, and Maple. It's 7' tall. Christmas Ornament Playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Sponsors ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolworks.com/ Crabtree Tools http://toolsbycrabtree.com/ Ways you can support the show Schedule one-on-one online classes jacobson68@yahoo.com ChefwareKits http://www.chefwarekits.com/easy-wood-tools?tracking car

 

Christmas Ornament Follow-up
By: Carl Jacobson
November 17, 2014 · 3,402 views

Segmented Christmas ornament, I turned a little segmented ornament. It's Zebra wood, Padauk, and Maple. It's 7' tall. Christmas Ornament Playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Sponsors ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolworks.com/ Crabtree Tools http://toolsbycrabtree.com/ Ways you can support the show ChefwareKits https://www.chefwarekits.com/?tracking carl Etsy https://www.etsy.com/shop/Thewoodshoptv?ref hdr_shop_men

 

#54 Woodturning a Segmented Christmas Ornament Part 2 of 2
By: Stephen Ogle
November 17, 2014 · 7,692 views

This is the exact same video as #54 except for the music over voice problem. I apologize for the problems with the previous video. I will remove it shortly. Part 1 is at: https://www.youtube.com/watch?v AUS1IRk4Ens&list UUDVVYzYJ-0Ye0kJAx8SQAEw Vince's Wooden Wonders: http://vinceswoodnwonders.com

 

2014 Christmas Ornament Challenge, First entry
By: Yuval Lahav Woodturning
November 16, 2014 · 24,396 views

My entry to Carl's and Allen's 2014 Christmas Ornament turning challenge! Patreon: https://www.patreon.com/YuvalLahav Instructables: http://www.instructables.com/member/yuvallahav/ Pinterest: https://it.pinterest.com/yuvallahav/ Facebook: https://www.facebook.com/yuval.lahav.16 Reddit: https://www.reddit.com/user/aforeignitalian/ I wanted to credit the music in my video, all the songs were download from 'http://www.freemusicarchive.org/', a site that gives access to free music, I'm not affiliated with them, or were asked to do this, I just thought it fair, and also if someone wanted to get the music in the videos for themselves, now they can do so, so the songs in order are: Jonathan Mann - The First Christmas Leah Morrow - Winter Wonderland Travis Taylor (feat. Emily Vella) - The Christmas Song Jonathan Mann - Nice King Hanukkah Song Hope y'all enjoy this video, and have a merry Christmas and happy holidays!!

 

1 Ornament Turning Challenge Entry 2014
By: Eric Percival
November 16, 2014 · 428 views

This video is about Ornament Turning for the 2014 ornament turning challenge.

 

Turn a Christmas Ornament Pt3
By: Woodcraft of Spokane
November 16, 2014 · 447 views

This is Part 3 of 3, , , John demonstrates how easy it is to turn a Christmas ornament on a wood lathe. This can be adapted to making lamp pulls, fan pulls, etc. These videos are done in front of a live audience and questions are asked throughout. John tries to re-state the question so you have the complete context of the demo. We hope you enjoy this series.

 

November 15, 2014
By: Ricky Walden
November 15, 2014 · 118 views

Turning a Christmas Ornament

 

Segmented Christmas Ornament
By: Carl Jacobson
November 14, 2014 · 11,470 views

Segmented Christmas ornament, I turned a little segmented ornament. It's Zebra wood, Padauk, and Maple. It's 7' tall. Christmas Ornament Playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Sponsors ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolworks.com/ Crabtree Tools http://toolsbycrabtree.com/ Ways you can support the show ChefwareKits https://www.chefwarekits.com/?tracking carl Etsy https://www.etsy.com/shop/Thewoodshoptv?ref hdr_shop_men

 

Christmas Ornament 2014
By: Chris Pine
November 14, 2014 · 3,218 views

Christmas Ornament 2014. In the theme of traditional Christmas toys, like the elves would make. I make this Bi-Plane Ornament from several woods. The Wings and tail surfaces are made from thin cocobolo, the propeller is made from cherry, the fuesalage is maple and the engine shroud is walnut. This is my first attempt at eccentric turning. This was a very fun project and I would encourage you all to enter an ornament in this years contest. Announcing the 2014 Christmas Ornament Woodturning Challenge sponsored by As Wood Turns, Alan Stratton, and Woodshop TV, Carl Jacobson. Challenge vid

 

Woodturning.dk Christmas Ornaments
By: Rasmus Petersen
November 14, 2014 · 928 views

The turning of christmas ornaments. Turning angle bodys. Julepynt drejning, Der drejes kroppe til engle. drejet i ask, med mejsel... Rasmus Petersen

 

Turn a Christmas Ornament Pt2
By: Woodcraft of Spokane
November 14, 2014 · 484 views

This is Part 2 of 3, , , John demonstrates how easy it is to turn a Christmas ornament on a wood lathe. These videos are done in front of a live audience and questions are asked throughout. John tries to re-state the question so you have the complete context of the demo. This second segment covers more on tool options, problems you may encounter while turning etc. We hope you enjoy this series.

 

Woodturning Christmas Ornament From Pen Blanks
By: As Wood Turns
November 13, 2014 · 5,874 views

http://www.AsWoodTurns.com For this ornament I wanted to try a variety of wood in a simple globe. Rather than scrounge for the wood, I chose nine pen blanks I purchased at a holiday sale. The pen blanks, though nice, would have blended together. To avoid this, I milled thin strips of walnut to glue between the blanks to separate and highlight the 'exotic' woods. After hollowing the globe, I turned a top and bottom finial that are joined by a small dowell thru the now hollow globe. A little wire formed into a loop and glued into the top finial completes the ornament. The pen blanks were stabilized with thin CA glue. All wood is finished with shellac friction polish. I let everyone on my email list know when the next easy woodturning project video is ready. Enter your email at http://www.AsWoodTurns.com. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Turn a Christmas Ornament Pt1 1
By: Woodcraft of Spokane
November 13, 2014 · 993 views

This is Part 1 of 3, , , John demonstrates how easy it is to turn a Christmas ornament on a wood lathe. These videos are done in front of a live audience and questions are asked throughout. John tries to re-state the question so you have the complete context of the demo. This first segment covers things such as sizing your blank, mounting it to the lathe, tool selection, etc. The later part goes into actual turning. We hope you enjoy this series.

 

#53 Woodturning a Segmented Christmas Ornament Part 1 of 2
By: Stephen Ogle
November 11, 2014 · 8,141 views

This is the first part of a two part series. Featuring the building and turning of my entry into the 2014 Christmas Ornament Challenge. Sponsored by Carl Jacobsen and Alan Stratton. Part 2 is at: https://www.youtube.com/watch?v 4OT19KidiFs&feature gp-n-y&google_comment_id z13tidaonxyay5mql04cdbuh4mv2w5zqqac

 

Ornament Follow-up and Full Length Videos
By: Carl Jacobson
November 10, 2014 · 3,531 views

If you would like me to start doing full length video no my Q&A channel let me know in the comments. Ways you can support the show ChefwareKits https://www.chefwarekits.com/?tracking carl Etsy https://www.etsy.com/shop/Thewoodshoptv?ref hdr_shop_menu Thank you for supporting free woodworking videos https://www.paypal.com/cgi-bin/webscr?cmd _s-xclick&hosted_button_id 7MQRX83KCLJBA My Q&A Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee Website http://www.thewoodshop.tv/ Google https://plus.google.com/11319990456589302739

 

#52 My 2014 Christmas Ornament Challenge Entry
By: Stephen Ogle
November 09, 2014 · 10,236 views

Here is a short slideshow of my first Christmas Tree Ornament this year. I am entering this video in the Ornament Challenge from Carl Jacobsen and Alan Stratton from As Wood Turns. A full length 2 part video series is available now to viewing at: https://www.youtube.com/watch?v AUS1IRk4Ens&list UUDVVYzYJ-0Ye0kJAx8SQAEw Let us never forget that Christmas is a celebration of the birth of our Lord and Savior Jesus Christ. The season should begin and end with him first in our thoughts and deeds.

 

Wyatt's ornament entry 2014
By: Rich McNatt
November 09, 2014 · 604 views

My 7yr old after 1 week of turning wanted to send in a entry so here it is

 

The Blind Wood Turner - Episode 10
By: Blind Woodturner
November 08, 2014 · 1,188 views

In this episode I am making a Christmas Ornament for Carl Jacobson & Alan Stratton's Christmas Competition.

 

Ornament #2 maple and walnut.
By: Rich McNatt
November 08, 2014 · 208 views

 

Ornament challenge #1 the lady
By: Rich McNatt
November 08, 2014 · 924 views

 

Christmas Ornament 1 Christmas Ornament Challenge
By: H F Bowern Designs - Harold Bowern
November 08, 2014 · 1,371 views

This is my first ever turning of a Christmas ornament. It is also my entry into Carl and Alan's Christmas Ornament Challenge. Made from scraps from the scrap bin. Thanks again for watching, I really do appreciate it. If you like this video, please click the 'Like' button. If haven't already don't forget to click the 'Subscribe' button, to continue watching more of my videos. You can also visit my website, http://hfbowern.com , where you will find samples of my woodworking projects, my BLOG, and other things about me and my hobbies. If you would like to follow my gardening projects on YouTube, you can find me at my YouTube gardening channel at https://www.youtube.com/user/TheOldWoodworker As always, bye for now, and I hope to see you on down the road!

 

Maple Christmas Ornament
By: Carl Jacobson
November 07, 2014 · 10,850 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII There has been a lot of great entries to the Ornament challenge. Christmas Ornament Playlist https://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ ChefwareKits https://www.chefwarekits.com/?tracking carl Carter and Son Tools http://carterandsontoolworks.com/ Crabtree Tools http://toolsbycrabtree.com/ justin fiaschetti https://www.youtube.com/watch?v o1er8_mZynU&index 17&list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ I upload a new project vide

 

2014 Christmas Ornament Challenge Entry 3
By: Custom Chris
November 07, 2014 · 6,491 views

Thanks to Carl and Alan for putting on the contest. For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

2014 Christmas Ornament Challenge Entries 1&2
By: Custom Chris
November 07, 2014 · 4,705 views

Thanks to Carl and Allen for putting the contest Hope every one has fun and happy holidays! Short video for the judges Come to my Amazon Store and find all your wood turning needs in one place. Easy to find products. http://astore.amazon.com/customchris-20 If you know a item that needs to be added to the store let me know. Profit go's towards the channel to make it better. For entertainment purposes only music by Kevin MacLeod (incompetech.com)

 

Many Woods Christmas Ornament for the Challenge
By: Mauro il tornitore
November 07, 2014 · 1,332 views

This is my first contribution to the 2014 Christmas Ornament Challenge proposed by Carl and Alan.

 

A Perfect Globe or Sphere Mirrored Christmas Ornament
By: As Wood Turns
November 06, 2014 · 7,703 views

http://www.AsWoodTurns.com This video is a combo. First, following a conversation with a fellow club member about his difficulty turning perfect balls and spheres, I'll demonstrate how to turn a perfect ball without having to buy and expensive jig. (and then finding the jig only does part of the job anyway.) Second, I'll use the sphere to create a Christmas ornament with mirrors set into its perimeter. For the Christmas ornament, I did not have to turn a perfect sphere -- not one would ever check for perfection and many would prefer a more elongated shape anyway. My ornament globe is walnut finished with shellac friction polish. The finials are turned from 'topical hardwood' pen blanks. The mirrors are 1' diameter from a local craft store. Beveled mirrors would be slightly better. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

TURNING AN ICICLE FOR AN ORNAMENT
By: WYOMINGWOODTURNER
November 05, 2014 · 4,458 views

Sam completes his ornament body by turning an Icicle. He shows the turning process as well as ebonizing a lighter colored wood.

 

2014 Christmas Ornament Challenge 2nd Entry DRV
By: Daniel Vilarino
November 05, 2014 · 27,555 views

Hi Everyone! This is my second entry for the 2014 Christmas Ornament Challenge presented by Alan Stratton and Carl Jacobson. I enjoyed turning these bells, and I like the way the paduak contrasts with the zebrawood. While turning the zebrawood bell (in the video it happens really fast, 60 times the normal speed) I applied friction at great speed to the border of the zebrawood bell with towel paper to produce the burn mark. I had a couple of mishaps while turning the clappers for the bells (I really need to practice with the skew chisel, I guess that tool will do a better job), and the clap

 

2014 Christmas ornament challenge on home made DIY lathe
By: Fiaschetti Woodworking
November 05, 2014 · 11,909 views

Please visit my new website http://www.fiaschettiwoodworking.com/ 2014 Christmas ornament challenge. This is my Christmas ornament that I have made out of cedar, redwood, and walnut. It is made on my home made lathe, with home made tools. fiaschettiwoodworking@gmail.com

 

Ornament, small fun project using scrap ( good kid project)
By: Rich McNatt
November 02, 2014 · 186 views

 

2014 Christmas Ornament Challenge 1st Entry DRV
By: Daniel Vilarino
November 01, 2014 · 2,298 views

1st Entry, Daniel R. Vilarino, 2014 Christmas Ornament Challenge Hi, my name is Daniel Vilarino and this video is to participate in the 2014 Christmas Ornament Challenge presented by Alan Stratton and Carl Jacobson. This is a first in several ways: it is my first YouTube video, it is the first time that I do hollow form in the lathe and also it is the first time that I use video editing software. So, I hope you like the result, and if you do, please give it a thumbs up. Also, please post your comments. I want to take this opportunity to wish everybody a Very Happy Holiday Season!

 

Turning an Ornament Body
By: WYOMINGWOODTURNER
October 30, 2014 · 7,492 views

Sam goes through his process of turning the body or globe of a traditional Christmas ornament.

 

Fitting an Ornament Globe and Finial woodturning
By: WYOMINGWOODTURNER
October 28, 2014 · 4,027 views

Sam demonstrates a technique for easily fitting a Christmas ornament globe with a finial.

 

Turning a Bell Christmas Ornament
By: RickTurns
October 20, 2014 · 37,776 views

Woodturning: turn a bell Christmas tree ornament. This video is one of several in which I turn quick and easy Christmas ornaments. These ornaments can be turned in 15 minutes or less, take only one small piece of wood, and make great Christmas trinkets to give to family and friends. I 'mass produce' a lot of these each year for small Christmas gifts. A text article on turning this ornament and two others can be found in the October issue of the Highland Woodturner, at this address: http://www.highlandwoodworking.com/woodturning-tips-1410oct/project/quick-and-easy-turned-christmas-ornaments.html Music courtesy of Audionautix.com

 

Turning a Christmas Bauble
By: Martin's Bazaar
October 20, 2014 · 450 views

Here, I turn a traditional wooden Christmas Tree Bauble.

 

Turning a Bell Shaped Christmas Ornament
By: IKI Woodturners
October 18, 2014 · 50,132 views

September 14, 2014 IKI Woodturners Presents: Turning a Bell Shaped Christmas Ornament Featuring: Keith Armstrong

 

2014 Christmas Ornament Woodturning Challenge
By: As Wood Turns
October 15, 2014 · 9,872 views

http://www.AsWoodTurns.com Here's a link to the challenge playlist http://www.youtube.com/playlist?list PL4W9FE566kZjS-v6DgI9EtV21F5gefkVZ Announcing the 2014 Christmas Ornament Woodturning Challenge sponsored by As Wood Turns, Alan Stratton, and Woodshop TV, Carl Jacobson. This is the third annual challenge. We'd had great responses to previous years. This year we're adding prizes to the top rated presenters. There are some rules: 3rd Annual Christmas Ornament Woodturning Challenge Rules and Guidelines. Rules 1. Ornament must be in good taste and somehow reflect the spirit of Christmas and/o

 

Ornament, inside out turning
By: Carl Jacobson
October 10, 2014 · 84,720 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII This ornament is an inside out turning. Inside out turning is done in two steps to create a hollow object. If you make this project I'd really like to see it, you can always share your projects on my website. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https://www.etsy.com/shop/Thewoods

 

Turning a rustic birdhouse ornament
By: Walter Wager
October 07, 2014 · 9,974 views

Demonstrates how to make a birdhouse ornament from a tree limb.

 

2014-07-19 Turned Ornament Trifecta
By: Gwinnett Woodworkers
October 02, 2014 · 19,322 views

George North, Dan Douthart, and Jimmy Rocker tag team their respective skills to bring you a laminated ornament with inlaid silhouettes. Individual parts of this were brought to you earlier this year. This time all 3 presenters each do their own portion of a cooking show style presentation. Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Twitter - https://twitter.com/gwinnettwoodwkr Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

HK 50A Presentation, Ornament
By: Paul Crabtree
September 24, 2014 · 378 views

How to use the HK-50A 'Hollowing King' hollowing tool. How to make a Christmas tree ornament. Safety of the tool. Accuracy of the tool. Versatility of the tool. Ease of setting the calipers.

 

Woodturning a Shadow Box Christmas Ornament
By: India indian
September 16, 2014 · 110 views

 

Woodturning a Christmas Ornament Part 2 of 2
By: India indian
September 16, 2014 · 34 views

 

a Christmas Ornament Part 1 of 2
By: India indian
September 16, 2014 · 25 views

 

Bell Ornament for Christmas---- by Wyomingwoodturner
By: WYOMINGWOODTURNER
August 15, 2014 · 9,114 views

Sam demonstrates the process of turning a Bell Ornament which can be a nice Tree decoration for christmas.

 

2014-02-08 Creating Christmas Ornament Plaques for Woodturning
By: Gwinnett Woodworkers
May 28, 2014 · 4,262 views

http://www.gwinnettwoodworkers.com Creating Christmas Ornament Plaques 02-08-2014 Bob Brokaw and George North demonstrate how to use a picture to create a set of silhouette plaques to apply to a core for a turned Christmas ornament. This class will show how the profile pictures start out as a plaque and proceed to an inlaid silhouette. Bob will explain how to select or take a picture suitable to turn into a silhouette. The silhouette is then set into a pattern to create a stack cut inlaid plaque. At GWA, the most popular program to render the patterns is DeltaCAD. Bob and George explain the steps necessary to import the picture, trace it, size it and create the pattern. Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

2014-02-13 - Globe Ornaments by Jimmy Rocker
By: Gwinnett Woodworkers
May 04, 2014 · 45,483 views

http://www.gwinnettwoodworkers.com Globe Ornaments by Jimmy Rocker - Feb 13, 2014 GWA member, Jimmy Rocker, demonstrates how he turns a spherical Christmas ornament from a glued block with a scroll saw silhouette or spalted wood plaque affixed on four sides. He also show his finishing technique using rattle can lacquer and a Beall buffing system. Recorded and presented in HD. Follow Us: Facebook - https://www.facebook.com/gwinnettwoodworkers Google - https://plus.google.com/u/0/108617881849470980915 Website - http://www.gwinnettwoodworkers.com Music licensed to Gwinnett Woodworkers Association by Pond5.com item #26177787 'Holiday Acoustic Guitar'.

 

NEFWA November 2013 Christmas Ornament
By: North East Florida Woodturners Association
March 10, 2014 · 3,633 views

Christmas Ornament Demonstration of turning a Christmas Ornament by Ed Malesky at the November 2013 meeting of the Northeast Florida Woodturners Association.

 

Bäumchen drechseln/ woodturning
By: Johann Koch
January 09, 2014 · 5,929 views

http://www.hobbykunstdrechsler.at

 

Star Of Bethlehem Laser Cut Christmas Ornament
By: As Wood Turns
December 25, 2013 · 3,652 views

http://www.AsWoodTurns.com We're celebrating Christmas with a Christmas Ornament Woodturning Challenge. This is my last entry for this year. This star is not a woodturning. But I think it is cool enough to enter the challenge. It is cut with a laser from 1/8 inch Baltic birch playwood. Depending on how it is hung, it takes a variety of dynamic, springy shapes. Merry Christmas. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. View the complete challenge playlist at http://www.youtube.com/playlist?list PL4W9FE566kZg607Dx9qIPk0P1dto5obIJ

 

Merry Christmas
By: treesandclay
December 25, 2013 · 2,853 views

A few small Christmas presents...

 

Turning Bird House Ornaments
By: Steve Lindsley
December 24, 2013 · 38,373 views

For my holiday projects this year I decided to turn bird house ornaments. I bought a few Dale Nish kits from Craft Supplies. The kit has everything you need to complete the project including a small bird for the perch and the eyelet for the top. Since I had 9 gifts to make I did change some of the supplied wood with some nice figured walnut that I had in the shop. I apologize for the lenght of the video. I edited out as much as I thought possible without taking away from the content. Also, a few sections have focus issues....I had the legs of the tripod against the lathe and it picked up some vibration. Live and learn! Thanks for watching. Comments are always welcome!

 

Inside Out Woodturning Christmas Tree Ornament
By: ThisWoodwork
December 22, 2013 · 86,876 views

Merry Christmas! Yet another Christmas tree ornament this year, sorry! In this video I take a second look at very simple inside-out woodturning, to make this interesting Christmas tree decoration. -------------------------------------------------------------------- Social Links... My Blog Channel: http://www.youtube.com/user/ThisWoodworkVlog Facebook Page: http://www.facebook.com/thiswoodwork Twitter Page: https://twitter.com/ThisWoodwork Google Plus: https://plus.google.com/u/0/b/114211522882686187159/114211522882686187159/ -------------------------------------------------------------------- Special thanks to Kevin MacLeod: http://incompetech.com/ for the music used in this video. -------------------------------------------------------------------- alex harris woodwork woodworking woodturning wooden thiswoodwork wood turning how to make

 

Inside Out Christmas Ornament
By: frank howarth
December 22, 2013 · 116,137 views

This ornament is an inside out turning made from six segments. In making this wood turning, the inside is turned first, then the six pieces are rotated 180 degrees. Then the outside is turned. The ornament is made from maple and walnut. Last years ornament: http://youtu.be/0nu4cHqiBGI

 

Wood Turning Hot Air Balloon Ornament
By: Carl Jacobson
December 20, 2013 · 9,733 views

ChefwareKits https://www.chefwarekits.com/?tracking carl My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

#15 Woodturning a Shadow Box Christmas Ornament
By: Stephen Ogle
December 20, 2013 · 10,088 views

I wanted to make another type of Christmas ornament and decided to try a shadow box to contain a picture of my kids. This is how I did it.

 

Finial Montage
By: treesandclay
December 20, 2013 · 3,178 views

These are dregs from the Christmas ornament video. Just a little more to watch if you want.

 

Woodturning a Christmas Ornament
By: treesandclay
December 18, 2013 · 6,676 views

Churning out a batch of ornaments just in time for Christmas. All the dark wood is walnut and the globes are cherry.

 

How to Make a Wood Turned Christmas Ornament
By: WildWood Design
December 15, 2013 · 2,982 views

In this one part How-To video, we cover the basic steps in making a Christmas Ornament using the WildWood 2013 Finial Kit. Visit BangleGuy.com to purchase the finial kit and wedding ring mandrel seen in this video. We also carry DIY ring kits, bangle kits, wood and much more!

 

Ornament Inside-Out Turning 2 of 2
By: Cip's Wood Chips
December 14, 2013 · 107,738 views

This is the second half of the inside-out turning of the Christmas Ornament Challenge. Glue Block video at http://www.youtube.com/watch?v l76ucLHx2WY

 

Ornament Inside-Out Turning 1 of 2
By: Cip's Wood Chips
December 14, 2013 · 21,229 views

I response to Alan Stratton's and Carl Jacobson's Christmas Ornament Challenge.. Glue block video: http://www.youtube.com/watch?v l76ucLHx2WY

 

Wood Turning Walnut and Oak Christmas Ornament
By: Carl Jacobson
December 13, 2013 · 14,569 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. I turned a Walnut and Oak Christmas ornament. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Coat Rack for Irene, Christmas 2013
By: WYOMINGWOODTURNER
December 13, 2013 · 4,145 views

Sam makes a coat rack on the lathe which requires woodworking. This is very informative and provides some great shots. A short clip shows Irene and my wife Cheryle with the coat rack.

 

Woodturning A Segmented Christmas Bell Ornament
By: As Wood Turns
December 12, 2013 · 6,300 views

http://www.AsWoodTurns.com Here's my next entry to the annual Christmas Ornament Challenge that Carl Jacobson and I are sponsoring. This is a segmented Christmas Bell to sound off at the birth of the baby Jesus. Its body is made of apricot with 5 rings of 8 segments each for 40 total segments. In addition, it has a handle and a knocker made from laburnum or golden Chain. It is finished with walnut oil. Simple Challenge Rules: 1. Make an Christmas ornament. 2. Make a video of you making the ornament. 3. Upload the video to YouTube 4. Let me know the link to add your video to the playlist. 5. Enjoy your ornament consistent with the season. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. View the complete challenge playlist at http://www.youtube.com/playlist?list PL4W9FE566kZg607Dx9qIPk0P1dto5obIJ

 

#69 Adornos navideà os Christmas ornaments
By: Miguel Sanchez
December 09, 2013 · 18,813 views

Ayuda al canal: www.patreon.com/miguelsanchez Help the channel: www.patreon.com/miguelsanchez Nos vemos a la vuelta de vacaciones. Que paseis una fantastica navidad y que el año proximo venga cargado de nuevos proyectos y nuestra familia y las vuestras crezcan y alcancen todas sus metas. http://www.facebook.com/profile.php?id 1181903663 http://www.tornoartesano.es miguel@tornoartesano.es

 

# 34 Christmas Bell
By: The Tiny Trailer Workshop
December 07, 2013 · 1,052 views

A compilation of different woods combine to make an attractive Christmas Bell. Music from Tyler Carson can also be heard. www.tylercarsonmusic.com

 

Wood Turning Christmas Ornament
By: Carl Jacobson
December 06, 2013 · 21,159 views

ChefwareKits https://www.chefwarekits.com/?tracking carl My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

#33 A Christmas Soldier Ornament
By: The Tiny Trailer Workshop
December 06, 2013 · 3,995 views

Silver Birch and a Christmas Soldier go hand in hand as far as I am concerned! Add a little wire and you have a fully decorated ornament for your tree! The music you hear is Tyler Carson and you can find out more about him at www.tylercarsonmusic.com

 

#13 Woodturning a Christmas Ornament Part 2 of 2
By: Stephen Ogle
December 05, 2013 · 10,442 views

Part 2. Turning a Maple Christmas Ornament, along with dying the wood for a different effect.

 

#12 Woodturning a Christmas Ornament Part 1 of 2
By: Stephen Ogle
December 05, 2013 · 17,752 views

Turning a Maple Christmas Ornament, along with dying the wood for a different effect.

 

Woodturning A Christmas Ornament With Finials
By: As Wood Turns
December 05, 2013 · 3,898 views

http://www.AsWoodTurns.com It's time for the annual Christmas Ornament Challenge. Carl Jacobson and I are sponsoring this challenge. Rules: 1. Make an Christmas ornament. 2. Make a video of you making the ornament. 3. Upload the video to YouTube 4. Let me know the link to add your video to the playlist. 5. Enjoy your ornament consistent with the season. This ornament is walnut with cherry finials, all finished with friction polish. It is hollow to make it light enough to hang on a tree. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready.

 

#32 Secret Compartment Christmas Ornament
By: The Tiny Trailer Workshop
November 30, 2013 · 1,380 views

A Christmas decoration with a hidden side!! Present a present in an private place in plain sight... Small gifts can be presented with little wrapping... Or... It could just be the gift itself! The main body (the onion) is Spalted Maple The cap and finial are Ebony The hanger is craft store thin gold (coloured) wire And in case you couldn't tell I really liked the way it fit... I guess that is why I managed to open and close it 10 times in one video!! Try it for yourself... it's fun!!! Thanks for watching and if you haven't already... Don't forget to subscribe! Larry

 

Christmas Icicle Project
By: woodturningwithtim1
November 29, 2013 · 11,630 views

Time to dress up the Christmas tree! Tim shows you how to make a quick and elegant icicle ornament.

 

DAW Birdhouse Ornament Demonstration
By: Roger Meeker
November 18, 2013 · 1,314 views

DAW Demonstration by Alfred Schembri Tips and techniques for making Birdhouse Ornaments

 

Woodturning a Birdhouse Ornament
By: Walter Wager
November 03, 2013 · 43,744 views

Video shows how to use spindle gouges to turn a birdhouse ornament

 

Bell Ornament
By: Walter Wager
October 30, 2013 · 4,609 views

A woodturning video showing the use of spindle gouges when turning a bell ornament for a Christmas tree.

 

# 191 Christmas Light Project
By: Cap'n Eddie Castelin
September 30, 2013 · 8,314 views

Get an early start on Christmas ornaments by making a string of Christmas lights. Big Guy Productions and Capt. Eddie Castelin are at it again. Contact Cap'n Eddie at eddiecastelin@cox.net or www.eddiecastelin.com

 

Sea urchin ornament video
By: Walter Wager
September 08, 2013 · 6,917 views

This video recognizes Cindy Droza's sea urchin's videos and presents a different way to make them using a center core that goes into the sea urchin. This allows them to hang straight even if the sea urchin isn't symmetrical.

 

2013-03-14 Birdhouse Ornaments by Bob Aldea (1h16m06s)
By: Gwinnett Woodworkers
June 19, 2013 · 16,533 views

Turning SIG 03-14-13 GWA Member Bob Aldea demonstrates his technique for turning small birdhouse ornaments on the lathe. From wood selection, to shaping, sanding, applying color and final finishing, Bob describes his entire process to achieve good results. Full Video (1:16) Filmed and uploaded in HD

 

Making a Sputnik Sea Urchin Ornament with Turned Wood Finials - Part 2
By: Cindy Drozda
June 16, 2013 · 29,564 views

In part 2, I turn a cap and finial to fit onto a Sputnik Sea Urchin Shell to create a hanging ornament with turned finials. In part 1, I prepared the shell to accept the finials. Please take a moment to visit my website, http://www.cindydrozda.com for more information about me, my Artwork and Woodturning Instruction. Instructional Woodturning DVDs, Signature Woodturning Tools, Supplies and Accessories for Woodturning are now available for online ordering! Questions and Comments are invited. Happy turning, everyone!

 

Making a Sputnik Sea Urchin Ornament with Turned Finials - Part 1
By: Cindy Drozda
April 30, 2013 · 20,220 views

In part 1, I show how I prepare the Sputnik Sea Urchin Shell to become the body of a hanging ornament with turned finials. In part 2, I will turn the finials. Please take a moment to visit my website, http://www.cindydrozda.com for more information about me, my Artwork and Woodturning Instruction. Instructional Woodturning DVDs, Signature Woodturning Tools, Supplies and Accessories for Woodturning are now available for online ordering! Questions and Comments are invited. Happy turning, everyone!

 

small thing
By: treesandclay
March 17, 2013 · 2,263 views

Messing around with some Christmas ornament and finial thoughts for next year. Not going to win any awards, but sometimes it's nice just to have something to watch, maybe a little inspiration.

 

Christmas Ornaments
By: Jim Ballard
March 16, 2013 · 6,488 views

Turning Christmas Ornaments on a wood lathe

 

31 - Christmas Ornaments - Roland Hege - 2Nov2010
By: Waxhaw Woodturners
January 29, 2013 · 1,484 views

Waxhaw Woodturners http://www.waxhawwoodturners.com Join us in Waxhaw, NC! Visit our website for times and directions. Video by Rich Hansen. Video by Daniel Brinneman. https://danielbrinneman.com

 

My Edited Video
By: Wood4turning
January 21, 2013 · 307 views

I created this video with the YouTube Video Editor (http://www.youtube.com/editor)

 

eccentric woodturned christmas ornament challenge
By: Jérôme Hamel
December 25, 2012 · 1,650 views

christmas ornament made of walnut and maple

 

Woodturning Christmas Ornaments: The Star of Bethlehem
By: As Wood Turns
December 24, 2012 · 11,496 views

http://www.AsWoodTurns.com This Christmas Ornament is woodturned walnut and maple about 6' high and 4.5' in diameter. The walnut body and maple finials are finished with friction polish. The ornament has a handmade brass hanger. The Star of Bethlehem represents the sign given for the birth of Jesus Christ, the true center of Christmas. The challenge with this ornament is accurately drilling the tenon holes in the star's body, then replicating 12 side finials. This ornament is part of the Christmas Ornament Woodturning Challenge 2012. Please view the playlist at http://www.youtube.com/playlist?list PL4W9FE566kZhU-Mo7smbQgsUb-wpUJGom. Carl Jacobson and I are sponsoring this challenge. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

Woodturning A Faux Inside Out Christmas Bell Ornament
By: As Wood Turns
December 21, 2012 · 4,755 views

http://www.AsWoodTurns.com This woodturning is made of maple poplar about 4' tall and 2' in diameter. The poplar bell is finished with acrylic paint for an antique look. The maple finial is finished with shellac. The ornament has a handmade brass hanger. Instead of being turned inside out, the center shape was drilled out with forstner bits. Small bits marked the top and bottom corners. Larger bits bored out the center of the bell. After mounting the ornament on the lathe, the bottom was also bored out with a forstner bit. Then the outer shape was turned. With the void in the middle, each stok

 

Turned orniments
By: Wood4turning
December 16, 2012 · 362 views

Wooden turned christmas tree ornament

 

Woodturning a Segmented Christmas Ornament
By: frank howarth
December 15, 2012 · 245,285 views

To make a segmented, woodturned Christmas ornament, I started by sketching what I wanted to do which was a Christmas tree figure on a sphere. I structured the sphere by layering up pieces of holly and purple heart to form the pattern, with a layer on the bottom for the trunk and a layer on the top for the sky. The original idea was to also make it hollow, drill holes in it for lights, and put a LED light with a watch battery inside. The turning proved to be at the limits of my skill level and tool collection. I dropped the light idea and just tuned it as a solid piece. I made a decorative finial at the top and bottom. Merry Christmas!

 

Woodturning
By: Wood4turning
December 10, 2012 · 118 views

Orniments

 

Woodturning Christmas Ornament: Enhancing Poplar and Maple
By: As Wood Turns
December 08, 2012 · 12,449 views

http://www.aswoodturns.com This woodturning is made of poplar and maple. The body is 2' poplar dyed red and finished with lacquer. The finials are maple finished with friction polish. Inside the ornament body is a cute little Christmas tree. The ornament has a handmade brass hanger. The interior of the body was drilled with a 1 1/8' forstner bit then sanded. The dye was applied with a mouth atomizer. This ornament is part of the Christmas Ornament Woodturning Challenge 2012. Please view the playlist at http://www.youtube.com/playlist?list PL4W9FE566kZhU-Mo7smbQgsUb-wpUJGom. Carl Jacobson and I are sponsoring this challenge. If you would like to enter an ornament in this challenge, video yourself making the ornament, upload it to YouTube, and let me know where the video is. I'll then add it to the challenge playlist. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

Christmas Ornament Woodturning Challenge - Dave Farrell
By: As Wood Turns
December 08, 2012 · 1,484 views

Entry in Christmas Ornament Woodturning Challenge - An army of snowmen - by Dave Farrell

 

Woodturning Christmas Ornament
By: Clayton Mitchell
December 04, 2012 · 10,860 views

Here I drill 2 holes directly through a trued up piece of maple and then create a circular tree ornament. All my turned items are for sale @ the Etsy link below. Better videos to come, subscribe if you'd like... Any comments, questions, ideas or suggestions would be nice, I can handle negative comments as well. My Etsy Shop http://www.etsy.com/shop/clayton03?ref si_shop Check out my Facebook Page http://www.facebook.com/CmTurningWeaves?ref hl Instagram - http://instagram.com/clayton03

 

Woodturning Christmas Ornaments: Icicles From Exotic Woods
By: As Wood Turns
December 02, 2012 · 4,427 views

http://www.aswoodturns.com This woodturning is a set of three exotic wood icicles ranging from 3 inches to 4 1/2 inches in length. Each as a finial at the bottom and a series of other shapes above the finial. They are strung on nylon thread and have a handmade brass hanger. Each as a variety of woods that I purchased at a black Friday sale. The store did not identify the woods but they have a nice color and density. I challenged myself to turn this entire project with a skew. The small scale of this project was a challenge. The 1/16' drill bit was prone to wander off center which resulted in

 

wood turning acorns and onrnaments
By: Wood4turning
December 02, 2012 · 2,355 views

woodturnings

 

DSSCF5370.AVI Painted Snow Man
By: Desmond Shore
December 02, 2012 · 69 views

Made out of wood

 

DSCF5369.AVI Snow Man
By: Desmond Shore
December 02, 2012 · 107 views

Snow man made on the lathe.

 

Woodturning Christmas Ornament
By: Carl Jacobson
December 01, 2012 · 22,007 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 This is a Christmas Ornament I turned out of Myrtlewood and purple heart. http://www.ebay.com/itm/Wood-Lathe-Steady-Rest-fits-Jet-Delta-Rikon-Grizzly-General-Shop-Fox-/251140298441?pt LH_DefaultDomain_0&hash item3a7920d6c9 - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Turning christmas ornaments
By: Wood4turning
December 01, 2012 · 335 views

Wood turning

 

Turned on lathe ornaments
By: Wood4turning
November 30, 2012 · 142 views

Carman from south park and mr hanky

 

Woodturning Christmas Ornament - Deep Space Nine in Walnut and Maple
By: As Wood Turns
November 23, 2012 · 4,129 views

http://www.aswoodturns.com This woodturning resembles the space station on Star Trek - Deep Space Nine. It has a wide, round main section with corridors back to the central hub. The top and bottom finials house docking bays and equipment not subject to gravity. Each is about 7' tall and 3' in diameter. It is about 7' tall and about 3' in diameter. The body is Walnut with Maple Finials. The body is inlaid with brass wire to resemble portholes. It is finished with a friction polish. The walnut body is drilled out to form spokes from the central core to the space station's outer ring. I picked up

 

Christmas Ornament Woodturning Challenge - Miguel Sanchez
By: As Wood Turns
November 23, 2012 · 1,926 views

A snowman with hidden boxes for the Christmas Ornament Woodturning Challenge. Entered by Miguel Sanchez

 

Woodturning Christmas Ornament - Sea Urchin On Apricot
By: As Wood Turns
November 18, 2012 · 3,342 views

http://www.aswoodturns.com This woodturning has a sea urchin shell on an apricot top and bottom finial. It is about 8 1/2' tall. The shell is about 2' in diameter. The apricot from urban forestry is finished with a friction polish. The sea urchin shell is protected by three coats of white glue on its inside. I sanded the top and bottom shell holes to make them uniform. Although I prefer finials with a fine point, I worried about grandchildren playing (inappropriately) with it. WIth this risk in mind, I made the finial points into moderate beads instead. The most difficult part is to fit the sh

 

Wood Turning - A Christmas Cracker!
By: Mike Waldt
November 12, 2012 · 8,514 views

I turn a Christmas Cracker.....for Christmas! For my friends in far off places, a link to the origins of Christmas Crackers :) http://en.wikipedia.org/wiki/Christmas_cracker

 

Tournage sur bois, dà co de Noël N 1 Woodturning, decorative Christmas No. 1
By: Laurent Cortot
November 12, 2012 · 56,695 views

Un photophore champignon :) Mon blog: http://lolotourneur.blogspot.com

 

WGNC Demo: Alan Leland hollow ornaments
By: weekendturner.com
November 12, 2012 · 56,596 views

WoodturnersGuild.com member and professional woodturner Alan Leland demonstrates his hollow-globe ornaments with extra-thin finials at the Nov. 8 meeting in the NC State Craft Center.

 

Woodturning A Christmas Ornament With Bronze Wire Inlay
By: As Wood Turns
November 09, 2012 · 8,906 views

http://www.aswoodturns.com This woodturning is a bronze wire inlaid Christmas ornament made of aspen and walnut finished with shellac. The body is a near sphere about 2 1/4' in diameter. It is solid - not hollowed out except for a 1/2' hole thru the center. It weighs in at about one ounce. The turning blank is salvaged from an offcut from a green turned bowl. The finials are also salvaged walnut from another bowl. I was fortunate to find a piece with the grain running along its length for the finial. The bottom of each finial has a 1/2' tenon and a 45 degree chamfer. These mate to correspondin

 

Woodturning A Christmas Bell Ornament Inside Out
By: As Wood Turns
November 02, 2012 · 44,201 views

http://www.aswoodturns.com This woodturning is a Christmas bell turned inside out. It proved to be a challenge to both visualize and to execute. It's made of apricot finished with shellac. An inside out turning is assembled from strips of wood. These are temporarily glued together and turned to form the inner shape and finished. Then the strips are separated, rotated, and glued back together making an inner void. Then the outer shape is turned. This bell is part of the Christmas Ornament Woodturning Challenge 2012. Please view the playlist at http://www.youtube.com/playlist?list PL4W9FE566kZhU-Mo7smbQgsUb-wpUJGom. Carl Jacobson and I are sponsoring this challenge. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

Christmas Ornament Woodturning Challenge 2012
By: As Wood Turns
October 23, 2012 · 2,774 views

http://www.AsWoodTurns.com We challenge all woodturners to turn a Christmas ornament and shoot a video of them turning it. Upload it & we'll put it in the Christmas Ornament Woodturning Challenge 2012 playlist on YouTube. Afterwards, use the ornament to enhance the true spirit of Christmas. Deadline Santa's departure for his rounds. Playlist URL: http://www.youtube.com/playlist?list PL4W9FE566kZhU-Mo7smbQgsUb-wpUJGom

 

NEFWA October 2012 -Thornhill Christmas Ornament
By: North East Florida Woodturners Association
October 23, 2012 · 744 views

Thonrhill Christmas Ornament Demonstration of turning a Thiornhill Christmas Ornament by Ed Malesky at the October 2012 meeting of the Northeast Florida Woodturners Association.

 

NEFWA October 2012 - Five Piece Ornament
By: North East Florida Woodturners Association
October 23, 2012 · 570 views

Five Piece Christmas ornament Demonstration of turning a Five Piece Christmas Ornament by Ed Malesky at the October 2012 meeting of the Northeast Florida Woodturners Association..

 

Turning Halloween Ornaments with David Best (woodturning dvd preview)
By: Craft Supplies USA
October 22, 2012 · 3,727 views

Learn how to turn six fun and unique Halloween ornaments using David Best's best tips and tricks. Buy now: https://www.woodturnerscatalog.com/p/99/5668/Best-Productions-Turning-Halloween-Ornaments-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe: https://www.youtube.com/user/CraftSuppliesUSA?sub_confirmation 1 The DVD explains how to make a custom table saw jig, gluing segments, turning, texturing, and finishing. 255 minutes. CRAFT SUPPLIES USA - The Woodturners Catalog Since 1982, woodturners have trusted Craft Supplies USA to provide them with the fine

 

NEFWA October 2012 - Acorn Christmas Ornament
By: North East Florida Woodturners Association
October 21, 2012 · 3,035 views

Acorn Christmas Ornament Demonstration of turning an Acorn Christmas Ornament by Ed Malesky at the October 2012 meeting of the Northeast Florida Woodturners Association.

 

2012-07-07 Christmas in July by Dan Douthart (1h28m37s)
By: Gwinnett Woodworkers
October 12, 2012 · 23,137 views

GWA Class 07-07-12 GWA member Dan Douthart demonstrates a method of turning small ornaments without hollowing the center using a pen-turning mandrel with shop-made spacers. Using this method allows for several ornaments to be turned at the same time. He finishes up by turning finials using a different approach, beginning with the base first while both ends are supported. Full Video (1:28:37) Filmed and uploaded in HD.

 

Ornament Turning Video Tutor Presented NewWoodworker
By: Rockler Woodworking and Hardware
September 26, 2012 · 16,937 views

This video presented by NewWoodworker.com is a demonstration on how to turn your very own unique Christmas Ornaments! Products featured in the video: Excelsior 5-Speed Mini Lathe (http://www.rockler.com/excelsior-mini-lathe)

 

Hand turned finial (Christmas ornament)
By: WYOMINGWOODTURNER
August 28, 2012 · 29,511 views

Sam Completes his Christmas ornament by turning a holly finial. He shows details in how to turn and chuck the finial with pin jaws. Remember there is a video showing the process of making a Christmas ornament. The two videos go hand-in-hand.

 

Hand-turned Christmas Ornament
By: WYOMINGWOODTURNER
August 28, 2012 · 26,411 views

Sam Angelo takes you through the steps in making a Christmas Ornament. He will turn the top of the ornament as well as hollow out the body of the piece. Included will be his methods for chucking and tools used. Sam will upload another video on turning the Finial.

 

2012-06-14 Turning Pens & Ornaments by R. Austin & J. Stripling (1h36m)
By: Gwinnett Woodworkers
August 18, 2012 · 2,906 views

GWA Turning SIG Class 06-14-12 This GWA Turning Special Interest Group class features Rob Austin who shows his method of turning pens and applying a CA finish. The class continues with Jimmy Stripling demonstrating his method of turning Christmas ornaments (he donated several to the Inverted Christmas Tree charity fundraiser last year). Full Video (1:36:13) Filmed and uploaded in HD.

 

Woodturning A Sea Urchin Ornament #2
By: As Wood Turns
July 19, 2012 · 7,580 views

http://www.aswoodturns.com This woodturning project is the second in a response to a challenge by Cascade Woodturners to make 'something' from a juniper block. I had made one already but decided to make a second sputnik sea urchin ornament. It has a sea urchin shell with juniper finials above and below the shell. The lower juniper finial is also a pedestal for the ornament. It chould be a Christmas ornament or a decorative ornament. To prepare for the first sea urchin, I reviewed two videos by Cindy Drozda who makes beautiful turned wood finials. I also practiced on two small ones before the real thing. In the end, the finials turned out well. At the end of the video, I compare these two ornaments to decide what direction to take for the next set. This one is a keeper. I'll show off both these wood turned ornament at Cascade Woodturners shortly. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

Woodturning A Sea Urchin Ornament
By: As Wood Turns
July 14, 2012 · 14,275 views

http://www.aswoodturns.com This woodturning project is a response to a challenge issued by Cascade Woodturners to make 'something' from a juniper block, I decided to make a sea urchin ornament with a sea urchin shell with juniper finials above and below the shell. To prepare, I reviewed two videos by Cindy Drozda who makes beautiful turned wood finials. In the end, the finials went fairly well. I practiced on two small ones before the real thing. This one is a keeper. I'll show off this wood turned ornament at Cascade Woodturners shortly. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next woodturning project video is ready.

 

Tornitura dissociata
By: Livio Maritati
June 17, 2012 · 79,680 views

Tutti i segreti di questa tecnica illustrati passo passo

 

10-22-11 Turning Christmas Ornaments by Dan Douthart (01h06m)
By: Gwinnett Woodworkers
February 05, 2012 · 7,860 views

Original Class Date 10-22-11 GWA Member Dan Douthart demonstrates the creation of turned Christmas ornaments using 'Toothpick Technology' developed by Mark Silay on the Lathe. Full Video (1:06) Filmed and uploaded in HD.

 

Woodturning,Turned Christmas Ornament
By: Carl Jacobson
December 23, 2011 · 35,840 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. I turned a Christmas ornament out of Myrtle wood,Walnut and purple heart. These make great gifts and are fun to turn. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Urchin Ornaments
By: Brian Havens
December 11, 2011 · 20,307 views

Just in time, while there is still a little time left before Christmas, here is a more advanced holiday project, as opposed to the colored Christmas ornament I demonstrated in my last Workshop Update. This is also a sort of a format pilot for a series of videos I am thinking of doing, after the new year, called 'At the Lathe', which would feature Woodturning techniques and information, everything from how to prepare and use a skew chisel, to how to utilized certain parts of a tree for the right kind of turning. Enjoy! P.S. If you cannot procure urchin shells in time for Christmas, you can always hollow out a wood globe to replace it. Burls would be nice for that.

 

Christmas tree bell.wmv
By: Brian Holmes
November 24, 2011 · 21,013 views

This shows how I made a wooden bell out of a piece of Ash. It is intended to be used as a Christmas tree decoration.

 

Christmas ornament globe and assembly
By: Bob Hamilton
October 30, 2011 · 11,588 views

This video shows me turning a basic globe type Christmas ornament and assembling the pendant and hanger piece to it at the end.

 

Christmas ornament pendant
By: Bob Hamilton
October 30, 2011 · 4,080 views

This video shows me turning a walnut pendant and hanger piece for a globe type Christmas ornament. If you have already viewed my other Christmas ornament series you will find that this pendant is pretty much the same and is turned using the same techniques, so you can skip right to the globe part of the ornament if you like.

 

Wood Turning Project Christmas Ornament for Chad's Charity
By: Carl Jacobson
September 21, 2011 · 81,978 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII Purple Heart and sycamore Christmas Ornament. I made this for Chad's charity project. I finished it with Deft Semi-Gloss wood finish. If you make this project I'd really like to see it, you can always share your projects on my website. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Etsy shop https:

 

Woodturning Christmas Ornaments with Rex and Kip - Vol 6 (woodturning DVD preview)
By: Craft Supplies USA
August 31, 2011 · 10,303 views

Watch a short preview of Rex and Kips new DVD 'Woodturning Christmas Ornaments ft. Dale Nish'. Buy now: https://www.woodturnerscatalog.com/p/99/5610/Learning-Turning-Woodturning-Christmas-Ornaments-Volume-6-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe: https://www.youtube.com/user/CraftSuppliesUSA?sub_confirmation 1 In volume 6 of their Woodturning Projects video series, Rex Burningham and Kip Christensen team up with Dale Nish to give detailed instruction on how to turn four Christmas ornaments and an ornament stand. •Detailed instructions step-by

 

Woodturning Christmas Ornaments with Rex and Kip - Vol 5 (woodturning DVD preview)
By: Craft Supplies USA
August 31, 2011 · 7,898 views

Watch a short preview of Rex and Kips new DVD 'Woodturning Christmas Ornaments ft. Dick Sing'. Buy now: https://www.woodturnerscatalog.com/p/78/4739/Learning-Turning-Woodturning-Christmas-Ornaments-Volume-5-DVD?utm_source youtube&utm_medium description&utm_campaign videos Please subscribe: https://www.youtube.com/user/CraftSuppliesUSA?sub_confirmation 1 In volume 5 of their Woodturning Projects video series, Rex Burningham and Kip Christensen team up with Dick Sing to give detailed instruction on how to turn three Christmas ornaments and an ornament stand. •Detailed instructions step-b

 

Ornament Video
By: ric47scroll
January 21, 2011 · 17,102 views

Making a simple ornament from some scrap wood. A very simple project. There are many more videos on my web site at http://www.scrollsaws.com/WoodLathe/woodlatheVideo.htm. I also have a large selections of scrollsaw videos..

 

Woodturning Projects Last of 2010 Christmas Ornament
By: Carl Jacobson
December 23, 2010 · 15,856 views

http://theturningshop.blogspot.com/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects with Carl Jacobson. Wood turning basics on a Lathe with basic wood turning tools. Taking you from start to finish with a ruff piece of wood to your sanded and finished project with paste wax and mineral oil for a superb finish. More Christmas Ornaments on the lathe. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Turning Christmas Ornaments Presented by Woodcraft
By: Woodcraft
December 07, 2010 · 26,410 views

Chris Stull, a teacher at the Parkersburg WV Woodcraft store, shows us how you can make your own Christmas Tree Ornaments. Full story at blog.woodcraft.com.

 

Woodturning Projects Small Christmas Ornament
By: Carl Jacobson
December 03, 2010 · 9,359 views

http://theturningshop.blogspot.com/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects with Carl Jacobson. Wood turning basics on a Lathe with basic wood turning tools. Taking you from start to finish with a ruff piece of wood to your sanded and finished project with paste wax and mineral oil for a superb finish. Woodturning Projects Small Christmas Ornament - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Woodturning Projects Redwood Christmas Ornament
By: Carl Jacobson
November 18, 2010 · 12,087 views

http://theturningshop.blogspot.com/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects with Carl Jacobson. Wood turning basics on a Lathe with basic wood turning tools. Taking you from start to finish with a ruff piece of wood to your sanded and finished project with paste wax and mineral oil for a superb finish. Turning a Christmas ornament on the lathe. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

5 Minute Christmas ornament on the lathe
By: Carl Jacobson
November 10, 2010 · 62,641 views

Check out my new video https://www.youtube.com/watch?v uFuQQ5rtyeU Check Out My New Video https://www.youtube.com/watch?v 94t_pBXyuII Christmas ornament on the lathe. I turned a Christmas light, tree,and a snowman. This is a easy project, and make great little extras on a gift box. If you make this project I'd really like to see it, you can always share your projects on my website. Here's a link to some of the tools I used in this video, http://astore.amazon.com/thewood0c-20 I upload a new project video every Friday. Thank you for supporting free woodworking My Et

 

Woodturning Projects Christmas Ornament
By: Carl Jacobson
November 05, 2010 · 12,539 views

http://theturningshop.blogspot.com/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects with Carl Jacobson. Wood turning basics on a Lathe with basic wood turning tools. Taking you from start to finish with a ruff piece of wood to your sanded and finished project with paste wax and mineral oil for a superb finish. Turning a Ornament on the lathe. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Woodturning Projects Christmas Ornament
By: Carl Jacobson
October 30, 2010 · 50,039 views

My New Channel http://www.youtube.com/channel/UCcG7TVNR1QxeAbVEeLa4seQ?feature mhee http://www.thewoodshop.tv/ https://plus.google.com/113199904565893027390#113199904565893027390/posts http://www.facebook.com/carljacobson68 Wood turning tips and projects. Taking you from start to finish with a ruff piece of wood to your sanded and finished project. Turning a Christmas ornament on the lathe. - - - - - - Please watch: 'Wood Turning' https://www.youtube.com/watch?v ig3HuD2qcds - - - - - -

 

Wiedemann Drechsler Meissel - drechseln woodturner woodturning
By: WiedemannHeinz
June 24, 2010 · 124,649 views

Weitere Infos finden sie unter http://www.holz-im-design.de Wiedemann Heinz beim meisseldrechseln.

 

Woodturning Taxus Ornamental turning.(5) Piezas con rose engine 002
By: TaxusWoodturning
November 03, 2009 · 3,093 views

 

Woodturning Taxus Ornamental turning (2) Máquina de rosetas.Rose engine.
By: TaxusWoodturning
November 02, 2009 · 5,135 views

 

Hollowing Christmas Ornament Globes the Easy Way
By: Ron Brown
September 27, 2009 · 28,624 views

Hollow through a 1-1/4' hole then make it dissappear so that even your Momma can't find it! This is a tease - there is no audio. Full instructions can be found on a double DVD set 'Fancy Christmas Ornaments the Easy Way with Ron Brown'. More info at www.coolhammers.com

 

Christmas Ornaments YouTube Short Preview
By: Ron Brown
June 21, 2009 · 10,162 views

 

Ornament Assembly
By: Bob Hamilton
April 06, 2009 · 5,214 views

This is the Ornament assembly section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Body Segment 4
By: Bob Hamilton
April 06, 2009 · 10,416 views

This is Segment 4 of 4 of the Ornament Body section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Body Segment 3
By: Bob Hamilton
April 06, 2009 · 6,790 views

This is Segment 3 of 4 of the Ornament Body section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Body Segment 2
By: Bob Hamilton
April 06, 2009 · 6,031 views

This is Segment 2 of 4 of the Ornament Body section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Body Segment 1
By: Bob Hamilton
April 06, 2009 · 9,092 views

This is Segment 1 of 4 of the Ornament Body section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Centerpiece Segment 3
By: Bob Hamilton
April 06, 2009 · 3,014 views

This is Segment 3 of 3 of the Centerpiece section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Centerpiece Segment 2
By: Bob Hamilton
April 06, 2009 · 2,831 views

This is Segment 2 of 3 of the Centerpiece section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Centerpiece Segment 1
By: Bob Hamilton
April 06, 2009 · 3,424 views

This is Segment 1 of 3 of the Centerpiece section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Pendant Segment 4
By: Bob Hamilton
April 06, 2009 · 4,064 views

This is Segment 4 of 4 of the Pendant section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Pendant Segment 3
By: Bob Hamilton
April 06, 2009 · 4,887 views

This is Segment 3 of 4 of the Pendant section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Pendant Segment 2
By: Bob Hamilton
April 06, 2009 · 4,727 views

This is Segment 2 of 4 of the Pendant section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Ornament Pendant Segment 1
By: Bob Hamilton
April 06, 2009 · 8,266 views

This is Segment 1 of 4 of the Pendant section of a companion video for the pictorial article on my website ( http://bobhamswwing.com/index_of_articles.htm ) for turning a Christmas ornament.

 

Birdhouse Ornament Tip 101
By: WoodenNicol
April 01, 2009 · 3,121 views

Putting the finishing touches on a turned birdhouse ornament

 

Christmas Tree Ornament.m4v
By: Sam Pane
December 14, 2008 · 19,910 views

This movie shows how I made a Christmas Tree Ornament using a wood lathe. I used Kingwood for the body and Birdseye Maple for the cap and finial.

 

Dave's Lathe Vol.6.wmv
By: David Clevenger
November 10, 2008 · 2,920 views

Turned Christmas Tree Ornaments

 

Icicle Christmas Ornament -Drilling and Hanging
By: Darrell Feltmate
November 15, 2007 · 8,400 views

Wood turning an icicle for the Christmas tree. Drilling the head and getting it ready to hang. from http://aroundthewoods.com

 

Icicle Christmas Ornament - the Head
By: Darrell Feltmate
November 13, 2007 · 37,661 views

Wood turning an icicle for the Christmas tree. Shaping the head. from http://aroundthewoods.com

 

Icicle Christmas Ornament - Mounting and Roughing
By: Darrell Feltmate
November 12, 2007 · 8,944 views

Wood turning an icicle for the Christmas tree. Shaping the body. from http://aroundthewoods.com

 

Icicle Christmas Ornament - Shaping
By: Darrell Feltmate
November 12, 2007 · 9,945 views

wood turning an icicle for the Christmas tree. Shaping the body. from http://aroundthewoods.com

 

Return to Turning Videos

Powered by Google

Great Bargains


Trend Diamond Abrasive Lapping Fluid

On Sale for only $12.99

Save $2.03

List price: $15.02

Click here for more information or to purchase


Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat

On Sale for only $32.79

Save $3.65

List Price: $36.44

Click here for more information or to purchase

 


NOVA G3 Reversible Wood Turning Chuck

For only $107.50

Save $52.49

List Price: $159.99

Click here for more information or to purchase


Easy Wood Tools COMBO: Easy Start Rougher, Finisher, Detailer

On Sale for only $145.77

Save $34.20

List Price: $179.97

Click here for more information or to purchase

 


Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Carter Products
Woodpeckers
Stainless Steel Bottle Stoppers

(Click any Ad to go to our Sponsor's Website)