Woodturning Online Videos

Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Bottle Openers Videos (25)

Sort by

Or click here to: Search All Videos

Heavy Duty Bottle Opener updated
By: Prokraft
January 01, 2019 · 187 views

See how to make a heavy duty chrome bottle opener with the Prokraft PKR BOT4 bottle opener kit. This kit is very easy to finish and makes a great gift or sale item at craft fairs. It can be fitted with a simple pilot hole or we now also sell a thread cutter specifically for the kit for acrylic type handles. Products are available here: https://www.prokraft.co.uk/heavy-duty-chrome-bottle-opener-kit.html


Making an Oak Bottle Opener Easy DIY Xmas Gifts
By: 207 Made
December 06, 2018 · 52 views

https://www.instagram.com/207made/ https://www.facebook.com/207Made


Sörbontó esztergálása /woodturning bottle open
By: Szabó Janó
October 03, 2018 · 800 views

Sziasztok! 12 éves kisfiammal Milánnal esztergálunk, és egy egy munkáról töltünk fel videókat. Aki szeretni látni hogy készül el fából pl egy tál vagy egy esztergált dolog akkor jó helyen jársz. facebook oldalunk: https://www.facebook.com/diszelifaesztergalyosok/ instagramm: https://www.instagram.com/szabojano


Bottle Opener
By: woodturningwithtim1
September 14, 2018 · 26,673 views

Everybody likes to pop a cap sometimes...a bottle cap that is. Tim makes a beautiful and useful bottle opener using a kit from Ruth Niles. Ruth has been designing bottle stoppers, bottle openers and other helpful woodturning items for years. Her products are top quality and Tim shows how her bottle opener system works. Niles Bottle Stoppers: https://nilesbottlestoppers.com/ Yorkshire Grit: http://yorkshire-grit.com/ You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://wtwtim.com/robustlathes.htm I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.


Heavy Duty Bottle Opener Kit
By: Prokraft
April 08, 2018 · 467 views

See how to assemble the Prokraft heavy duty bottle opener kit. Instructions for use with wood and acrylic / Corian type handles.


109 - Woodturning - Bottle Openers
By: Roweville Retro
March 04, 2018 · 61 views

Two quick little bottle openers. Both are available online, or at local woodworking stores like rockler. Opener Disc: http://www.rockler.com/rockler-inset-bottle-opener-36420 Standard Opener: https://www.woodcraft.com/products/bottle-opener-kit-chrome Music from http://www.gosoundtrack.com, under Creative Commons Attribution License: https://creativecommons.org/licenses/by/4.0


Wood Turning a Simple Bottle Opener (after a productive day)
By: Jerry Paul
February 25, 2018 · 1,186 views

In this video I'm turning a bottle opener from a piece of maple, making the business end from a steel washer and a screw. I finished the piece with Yorkshire Grit and Hampshire Sheen. I really love this stuff! The finish mellows to a beautiful sheen that highlights the wood. I get mine here in Canada from Rob Summerlin at Woodslee Summercraft. This is Rob's site: http://www.woodsleesummercraft.ca/ https://www.paypal.com/cgi-bin/webscr?cmd _donations&business RK3D9P3RLYDFU&lc CA&item_name Jerry%20Paul%20TreeCreations¤cy_code CAD&bn PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted Snail mail: Jerry Paul Box 233 Kamsack, Saskatchewan Canada S0A 1S0


Turning A Bottle Opener Without a KIT!
By: Gord Rock
October 27, 2017 · 1,706 views

Making a Bottle Opener without a KIT. Link to video on Making a Kaleidoscope without a Kit: https://youtu.be/dljaGpQidxU


50 Caliber Steampunk bottle opener pen
By: Gabe Castro
October 15, 2017 · 89 views

50 Caliber Steampunk bottle opener pen, they actually open bottles.


By: Nick Zammeti
April 21, 2017 · 63,764 views

So, here im just experimenting with turning sea shells. i decided to make a bottle opener. Music By http://www.epidemicsound.com/ MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.recordpower.co.uk/ ………………………………………………………………………………………………………………………………………………………. PLEASE NOTE: IF YOU ARE SENDING ME SOMETHING, PLEASE COULD YOU


Grapevine&Alumilite Bottle Opener
By: Casey Martin
March 10, 2017 · 1,975 views

Hope you all like the video! Let me know what you think. Tools I Use: https://winecountrywoodworks.com/tools-i-use/ My blanks can be found at: https://www.etsy.com/shop/WineCountryWoodwork?ref hdr_shop_menu WineCountryWoodworks.com My email: casey@winecountrypens.com


gedrechselter Flaschenöffner , woodturning a Bottle opener DIY
By: Woodturning F-Z
March 09, 2017 · 4,052 views

Ich habe aus einem Stück Olivenholz einen Flaschenöffner gedrechselt als Verzierung wurde ein Zahnrad mit schwarzem 5min Epoxi eingeklebt und anschließend plan geschliffen. A woodturnend Bottle opener from a pice Olive wood on Top I glue a small gear


Woodturning Gidgee and Milliput bottle opener Part 2
By: AJY Wooden-Stuff
February 06, 2017 · 383 views

Part 2 of Gidgee and Milliput Bottle opener


Woodturning Gidgee and Milliput bottle opener part 1
By: AJY Wooden-Stuff
February 06, 2017 · 480 views

Part 1 of Gidgee and Milliput opener


50 caliber steam punk bottle opener pen
By: Gabe Castro
January 18, 2017 · 122 views

50 caliber steam punk bottle opener twist pen from start to finish, from exoticwoodpen.com Click link to buy Mini lathe: http://amzn.to/2yzlyMs


Buffing 50 caliber bottle opener pen
By: Gabe Castro
January 16, 2017 · 108 views

Buffing 50 caliber bottle opener pan on a 4 inch buffing wheel with a homemade mandrel on mini lathe. Click link to buy Buffing Wheel: http://amzn.to/2yzMZWn


Celtic Knot Bottle Opener
By: Maple-Crossing Woodworks
November 27, 2016 · 2,403 views

This video is all about making a Celtic Knot, it just happened to get made into a bottle opener handle. This is a much more simple project than I thought it would be, once I got the walnut cut into 1/8' thick boards. This process would be easy to use for many other projects, and I'll be applying what I learned from this project to future videos! I hope you enjoy!


Bottle Opener with Wood Handle
By: Cip's Wood Chips
September 11, 2016 · 20,865 views

There are many ways to open a drink bottle. Here is the one I made from a scrap piece of mahogany and a little bit of hardware.


Woodturning Bottle Opener
By: Landon Craig
April 05, 2016 · 2,351 views

Thanks for watching, today i am turning a bottle opener out of some cocobolo. I do custom commisions on my website, check it out (craigcarvings.com) Music: Soundcloud.com/dj-direwolfe-tm


Christmas Gifts #3 Bottle opener from Jack Daniels Barrel blank
By: H F Bowern Designs - Harold Bowern
November 26, 2015 · 1,213 views

Welcome back! Well today I am going to turn a bottle opener from a Penn State kit that I got from my local pen kit supplier, William Wood Rite in Guelph. The blank, which I also got from my pen supplier, is a authentic piece of a whiskey barrel from Jack Daniels. I have the card stating that. The shape of the opener handle is a small dome shape about a 1/2' from front end of opener and then tapering to the back end of the opener. The finish I use is Doctor's Workshop Walnut Oil and Wax. I also show you the other part of this special Christmas gift. The 6 pack beer caddie which is made fr


Flaschenöffner - Bottle opener - drechseln - Eiche gebürstet - Helmchen
By: Thomas Hilleke
October 10, 2015 · 9,006 views

Meine verwendeten Werkzeuge Handycam http://amzn.to/2q3Blfo Kamera http://amzn.to/2pT0HQV Für Anfänger eignen sich sollte Sets http://amzn.to/1OWF2HV Darin sind alle Werkzeuge enthalten um z.B. diese Arbeiten ausführen zu können. Spart nicht am falschen Ende und geht bitte nicht zu Billigwerkzeugen, die schlechte Qualität kann gerade beim Drechseln gefährlich sein, wenn Werkzeuge durch die hohen Kräfte z.B. brechen. Forstnerbohrer Ø50mm und Ø35mm Ø50 http://amzn.to/1OWGpGJ und mittlerweile habe ich das Forstnerbohrer Set von Festool, die Bohren sind sehr scharf und arbeiten super! http://a


bottle opener
By: Rich McNatt
May 29, 2015 · 549 views


Bottle Opener
By: Cip's Wood Chips
May 07, 2015 · 19,117 views

I don't like buying kits because of the cost. I made this bottle opener from parts I found in a thrift store and an ugly piece of mesquite from the firewood stack.


Woodturning: A Bottle Opener
By: Roundabout Woodworks
December 02, 2014 · 62,241 views

Make a bottle opener without a kit! These make a great gift and don't require any specialized parts. Your local plumbing supply or home center has everything you need to make a great bottle opener.


The Tale of Two Bottle Openers.
By: Chris Pine
April 29, 2013 · 8,439 views

Bottle opener project. I make two different designs of botle openers out of wood and use a nail and a penny as the prying device. Please subscribe, Like, and Comment. My other social media: Keek: http://www.keek.com/cpine Facebook: https://www.facebook.com/pages/I-Wish-I-was-Home-Productions/176321852397752


Return to Turning Videos

Great Bargains
(ends April 25, 2019)

Square Mini Ergonomic Carbide Turning Tool

On Sale for only $49.99

Save $30.00

List price: $79.99

This Square Carbide Mini Turning Tool from Rockler features a replaceable and rotatable cutter that eliminates the hassle and downtime of sharpening. Simply rotate the carbide cutter for a fresh, sharp edge, and replace it once all available edges have grown dull. The solid carbide cutter also stays sharp for longer when compared with steel, giving you a much longer useful life. Shaft features a flattened back for stability when using the tool rest. The handles are made of solid ash encased with a thick, molded rubber end for an enhanced grip and reduced fatigue.

Click here for more information or to purchase


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase


Rockler Four-Piece Cheese Knife Turning Kit

7/8" On Sale for only $29.99

1 1/4" On Sale for only $39.99

Save $10.00

List Price: $39.99

The cheese cutters are made from food-grade 304 stainless steel and attached to the handles which you turn. The kit includes 1/4-20 threaded inserts. The cheese cutters themselves are dishwasher safe; the handles are easily removed for this purpose.

Click here for more information or to purchase

GVS Elipse P100 Half Mask Respirator with 2 Bonus Filters, Small/Medium

For only $25.99

Save $11.99

List Price: $37.98

These Elipse P100 Half-Mask Respirators from GVS are designed to protect against dust particles, metal fumes, mists, oil and water vapors, and even some micro-organisms. Each mask includes two low-profile filters, which permit a wide field of view, and won't interfere with safety glasses and sanding shields. The filters are easily interchangeable, and replacement filters are readily available.

Click here for more information or to purchase

Uvex Bionic Face Shield with Clear Polycarbonate Visor and Anti-Fog/Hard Coat

For only $32.74

Save $13.70

List Price: $46.44

Shell offers built-in chin protection and extended top-of-head coverage. Highly adjustable headgear tilts visor nearer or farther from face depending on preference and application. Comfortable cell foam on back of headgear. Breathable, removable, washable headband. Comfortably worn with most goggles and respirators.

Click here for more information or to purchase

4-Piece Safety Kit

For only $19.99

Save $15.00

List Price: $34.99

Push stick with ergonomic handle has embedded magnet for easy storage on your saw. Ideal for table saw and router table use. Angled push blocks feature ultra-grippy Bench Cookie pad material. They are great for jointer and router table applications. Table featherboard assists in holding stock against the fence while sawing or routing and helps to reduce kickback. It fits standard 3/4" x 3/8" miter slots found on table saws and router tables, and features expandable miter track bars for maximum holding power.

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Stainless Steel Bottle Stoppers

(Click any Ad to go to our Sponsor's Website)