Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Egg Cups Videos (22)

Sort by

Or click here to: Search All Videos


05 - Egg Cup from Carob Wood ·
By: Bill Rockwood
October 04, 2016 · 130 views

I turn an egg cup from some Carob wood that was locally harvested.

 

Utah Woodturning Symposium - My 2016 Egg Cup Race Entry ·
By: As Wood Turns
May 20, 2016 · 2,014 views

http://www.AsWoodTurns.com I enjoy attending woodturning symposium - the Utah Woodturning Symposium is one such treat. In addition to all the demostrations and exhibits, an annual feature is the egg cup race. I've participated for at least three years. It is a lot of fun. Each participant is given a block of green wood with a tenon already turned and mounted in a lathe. Two woodturners turn at the same time competing either for the fastest egg cup or the best egg cup in less then two minutes. There was a healty mix of presenters, professionals, experienced and not-yet-experienced turners. I

 

Woodturning an Eccentric Alien Egg Cup Type Thingy ·
By: Jerry Paul
November 29, 2015 · 1,164 views

I think it was Mark Twain who said something to the effect of - 'You should hire a lazy man because he'll always find an easier way to get the job done.' Personally, I have yet to see someone turning an eccentric piece this way. It worked pretty good for me, although some may see this as being un-safe. DO NOT TRY THIS IF YOU FEEL IT MAY BE UN-SAFE!!!

 

Un coquetier et une toupie - An eggcup and a spinning top ·
By: Claude Bondet
November 22, 2015 · 1,112 views

Tournage d'un coquetier et d'une toupie, finition glacée sans ponçage ni polissage. Turning an eggcup and a spinning top, quality cutting, no sanding nor polishing.

 

Eicherbecher drechseln - Woodturning eggcup - DIY - Helmchen ·
By: Thomas Hilleke
November 14, 2015 · 6,991 views

Meine verwendeten Werkzeuge Handycam http://amzn.to/2q3Blfo Kamera http://amzn.to/2pT0HQV Für Anfänger eignen sich sollte Sets http://amzn.to/1OWF2HV Spart nicht am falschen Ende und geht bitte nicht zu Billigwerkzeugen, die schlechte Qualität kann gerade beim Drechseln gefährlich sein, wenn Werkzeuge durch die hohen Kräfte z.B. brechen. ein interessantes Werkzeug ist noch die Crown Ellsworth Röhre http://amzn.to/1Tje8Sq Mit ihr kann geschruppt und geschlichtet werden. Für Anfänger in der Stirnholzbearbeitung Ringeisen http://amzn.to/1OWFp5f Ausdrehhaken klein (gerade und gekröpft) http

 

turning a simple egg cup ·
By: Bram the Wadesmill woodturner
May 02, 2015 · 401 views

Description

 

Egg Cup ..... Easter Egg Project 2015 ·
By: WYOMINGWOODTURNER
April 08, 2015 · 4,208 views

Sam completes his Easter egg project by turning 3 egg cups. Happy Easter 2015

 

The Egg Stand. Special Focus on Finishing. ·
By: The Walnut Log Studio
March 21, 2015 · 318 views

I have been asked several times about my friction polish finishing techniques. This video highlights the steps I take and how I use the products. I'm making an egg stand out of Black White Ebony, for an egg I turned already. My friction polish process: Sand to 600 buff with a green then grey Scotch Brite pad apply 2 coats Mylands Cellulose sanding sealer, thinned approx. 70/30. Buff the seal coat back with a tripoli compound. I use Dr. Kirk's Scratch FrEEE Hand rub one coat Mylands Friction Polish and let dry. Turn lathe on and apply one very light coat (seriously, a drop or two will do) at speed and buff till glossy. Let dry. Apply as many coats as you need, allowing dry time in between. That's it. Pretty simple and you get a decent shine. Music: 'Everlasting' Written by Alvin Zamudio Performed by Titus Elektro 2001 Alvin Zamudio Available on www.noisetrade.com Like, Comment and Follow if you'd like! I appreciate you taking the time to watch.

 

Egg Cup - Q&A - Design Ideas ·
By: PeteTGIF
October 06, 2014 · 362 views

Thank you RobbieTheWoodturner for your question. Being one who isn't an expert on sharpening his tools, I show, not demonstrate, my way of sharpening. I also try to explain, why my egg cup came out the way it looks. Although being far from a person called TreeHugger, especially the history of the Lüneburger Heath, the area where I live makes me think about, how humans do create a whole new landscape by misusing the trees as a cheap way to get rich, or as of today, save some money. Please leave your comments and ideas about how we might preserve our resources for our children.

 

Finally an Egg Cup ·
By: PeteTGIF
October 02, 2014 · 598 views

While I have a 'big' project on my bench - the birthday present for my mother - I forgot about the time. As it is 'Tag der Deutschen Einheit' (German Unity Day) tomorrow, I thought a nice breakfast would be fun. Although I turn for more than a year now, and from the day I bought my lathe I wanted to turn an Egg Cup, I've never done so. So here it is: my first ever turned Egg Cup. -------------------------------------------------------- Due to the little amount of time, I don't talk during the turning part of this video. I'll leave my design ideas to the Q&A on Monday. Music Rocket and El Magicia by Kevin McLeod, http://www.incompetech.com Lizenz Creative Commons 3.0 http://creativecommons.org/licenses/by/3.0/deed.de

 

A Triple Multi-Axis Egg Cup Challenge Answered ·
By: As Wood Turns
June 12, 2014 · 3,384 views

http://www.AsWoodTurns.com After last week's egg cup, Larry joked 'why not an eccentric egg cup'. I took that as a challenge. This triple egg cup is turned from red cedar and finished with beeswax and mineral oil. The turning axis was shifted 1.25' in three directions 120 degrees apart to turn the hollows for the eggs. It could also serve as a jewelry stand, a candy dish, or a display stand. Special safety precautions were considered to ensure that I would not get hurt while turning it. This project is for experienced turners only. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/ AsWoodTurns

 

Utah Woodturning Symposium Egg Cup - Not On The Clock ·
By: As Wood Turns
June 06, 2014 · 3,400 views

http://www.AsWoodTurns.com While at the Utah Woodturning Symposium, I participated in the Egg Cup Turning contest. In the contest, either two individuals or two teams of two woodturners competed against each other to turn an egg cup as quickly as possible. Many who had participated in previous years turned their egg cup in about 30 seconds. My time was about 2 1/2 minutes. Not bad but not the fastest. Mine was decent but not what I call a finished piece. Upon returning home, I decided I needed to turn another egg cup to satisfy myself that I could do better not in terms of time but in a finish

 

Wood Turning #76 Egg Cup ·
By: The Tiny Trailer Workshop
June 06, 2014 · 2,353 views

Wood Turning #76 Egg Cup I hadn't done a normal egg cup so I thought it was high time I did! This piece of Arbutus had a few cracks in it elsewhere... but I seemed to have dodged the bullet on this one! I am always amazed by the difference in colour between green and seasoned wood... green this would be almost white! This was designed with the farm fresh eggs in mind... it might be a little large for regular store bought eggs! I thought I would add the transcript of the video in case it made it easier for translation to have a text file as well... Hello and welcome to the Tiny Trailer Worksho

 

Wood Turning #76 Texted Egg Cup ·
By: The Tiny Trailer Workshop
June 06, 2014 · 473 views

Wood Turning #76 Egg Cup I hadn't done a normal egg cup so I thought it was high time I did! This piece of Arbutus had a few cracks in it elsewhere... but I seemed to have dodged the bullet on this one! I am always amazed by the difference in colour between green and seasoned wood... green this would be almost white! This was designed with the farm fresh eggs in mind... it might be a little large for regular store bought eggs! I thought I would add the transcript of the video in case it made it easier for translation to have a text file as well... Hello and welcome to the Tiny Trailer Worksho

 

Egg Cup - Woodturning ·
By: Fabian's Tiny Workshop
May 16, 2014 · 9,692 views

turning an egg cup on my mini lathe If you're interested in woodturning, please visit Carl Jacobson's website and youtube channel: http://thewoodshop.tv/ http://www.youtube.com/user/haydenHD

 

Wood Turning #63 An Off Kilter Egg Cup ·
By: The Tiny Trailer Workshop
April 11, 2014 · 9,625 views

This is an exercise in camera learning skills! I am afraid that I zoomed in the camera to do one shot... and forgot to zoom back out again! And now as I upload this... it tells me up top there that this is going to take 1545 minutes... no make that 2147! And I am all the way up to 2%!! So who knows how long this will take... but when it finally gets there... I thank you for watching! It says that I uploaded it on the 10th, but it is 7:30am on the 11th and I am only just now able to check it to see!

 

Wood Turning - An Egg & Egg Cup ·
By: Mike Waldt
July 21, 2013 · 41,512 views

I turn an Egg and Egg Cup from Yew and some wood that I found by the side of the road, which I think is Apple http://www.gremlinwood.com

 

Woodturning a egg and cup ·
By: mats persson
February 06, 2013 · 734 views

Turning a egg and cup

 

Tournage sur bois d'un coquetier - Wood Turning - Egg Cup ·
By: Laurent Cortot
March 01, 2012 · 13,390 views

Mon blog: http://lolotourneur.blogspot.com/ Coquetier en cerisier

 

How to turn a Egg cup ·
By: Philip Greenwood
November 05, 2011 · 3,780 views

How to turn an Egg cup by Philip Greenwood RPT. I will show you the process in turning an egg cup. www.woodturningintoart.co.uk

 

Quick Fun Turnings ·
By: Jake Gevorgian
October 16, 2011 · 65,217 views

In this video I'm making a spinning top and couple of egg holders. If you noticed, before I flipped the last piece for the base turning, I made a little V-Grove. This grove fits right inside the serrated jaws, and with this method the sharp teeth of the jaw don't damage wood.

 

Woodturning Projects Egg Cup ·
By: ThisWoodwork
March 05, 2011 · 104,723 views

A video showing making a egg cup holder out of wood using the woodturning lathe. Teenwoodworker making an egg cup on the wood lathe alex harris. Great woodturning project with burning lines, quick woodworking project to do. woodwork woodworking woodturning project projects wood turning turner oil finish wire box goblet table spinning top vase hollow vessel face plate chuck woodturner shop work woodshop workshop shed lathe how to make build plate bowl platter

 

Return to Turning Videos

Great Bargains


Heavy Duty Live Center

On Sale for only $16.53

List Price: $19.95

Click here for more information or to purchase

 


Dremel Rotary Tool Kit

On Sale for only $139.00

Save $60.99 (30%)

List price: $199.99

Click here for more information or to purchase


Roller Stand

On Sale for only $23.79

Save $6.11 (20%)

List Price: $29.90

Click here for more information or to purchase

 


Easy Wood Tools - Easy Start Rougher + Finisher + Detailer

On Sale for only $159.99

List price: $206.97

These tools have the smaller 9" maple handle and are 12.5" overall.

Click here for more information or to purchase


NOVA 48232 G3 Reversible Wood Turning Chuck

On Sale for only $99.00

Save $60.99 (38%)

List price: $159.99

Click here for more information or to purchase

Powered by Google

Our Newsletter

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we create a newsletter to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

From Walnut to Antlers
Teknatool
Hunter Woodturning Tools

(Click any Ad to go to our Sponsor's Website)