Woodturning Online Videos


Welcome to the Woodturning Online Videos page.

This video content was created by woodturner, Rick Morris. He has created a way to monitor all the videos in YouTube that are woodturning related.

Each month, Rick updates the video listings below. If you would like to learn about new videos, sign up for our free newsletter where we will list the top 20 videos each month.

Any categories in BOLD have sub-categories to help you narrow down your search.

Eggs Videos (91)

Sort by

Or click here to: Search All Videos


Production of Micro Dizzy Eggs
By: SIS Woodworking
October 26, 2019 · 760 views

This video describes the production of 4 Micro Dizzy Wood layered eggs. The process begins with the slicing of natural colored woods of various species sliced to between 0.007' and 0.060' thick. 69 layers of wood are glued together to produce a 2' thick laminated board. From this board round discs are cut when are then sliced into 0.050' thick discs. These discs are then glued back together, rotating each disc about 2 degrees to produce the dizzy pattern blank. This is then turned on the lathe to produce the micro dizzy egg. Each egg is 2.35' tall by 1.75' diameter and contains about 5,000 wood surface exposures.

 

woodturning a large egg in 9 minute
By: Tony Wood Craft
August 21, 2019 · 1,498,845 views

Here I share my skill turning wood , more tutorial , creative ideas help you to make beautiful accessories using wood.

 

Woodturning - Not Another Dragon Egg !!
By: Andy Phillip
June 21, 2019 · 2,359,506 views

Its been a year since I made the blue Dragon Egg and I've had quite a few requests to make another ..I took an Ash log and after turning the egg shape did some fractal burning which I filled with resin..I was gutted to lose so much of the fine detail so made a couple more trying different methods..you can check them out here https://www.instagram.com/p/BzGJJJlgzJ7/?igshid 165x9w8nihmkz I didn't show any footage of what I use for the burning as I don't want anyone to copy it ,as it can be dangerous ..If its something your interested in doing please make sure you research it and take all necessary safety precautions my etsy & Instagram links https://www.etsy.com/uk/shop/AndyPhillipHandmade? https://www.instagram.com/andyphillip_/ DISCLAIMER : My videos are for entertainment purposes only. When using any tools/machinery always read & understand manufacturer's guidelines & safety instructions. The methods I use may not be the safest, so please be responsible for your own safety ...

 

Woodturning - Dragon egg nest!
By: CraftWithAfshin
May 26, 2019 · 1,163 views

Hi everyone today is the follow up to the fiery dragon egg this time im turning rotten one :D i hope you like the design!

 

Woodturning a Fiery Dragon Egg!
By: CraftWithAfshin
May 25, 2019 · 2,843 views

Hi everyone today im turning my first dragon egg out of resin and Red mallee burl! it was very fun to turn and i hope you like the result, thanks for watching :D

 

Woodturning a Pine Cone Dragon's Egg
By: Jim Overton - Jimson's Stuff
May 24, 2019 · 55,242 views

#dragonegg #GOT #gameofthrones Many thanks to my friend and fellow youtuber Zac Higgins for giving me the blank to make this egg. check out Zac's channel https://www.youtube.com/user/NVWoodwerks Easy Wood Tools http://www.easywoodtools.com/ Easy Wood Tools are available in the UK from Yandles https://www.yandles.co.uk/ I bought the One Way vacuum chucking system from Turners Retreat https://www.turners-retreat.co.uk/ Yorkshire Grit Woodturners abrasive paste http://yorkshire-grit.com/ The Merlin 2 that I used for shaping and sanding the base is made by King Arthurs Tools https://katools.co

 

making and coloring Easter eggs
By: Rons Woodturning shop
April 21, 2019 · 454 views

Fun day with quick and easy project. plus made my Sister happy which is always good!

 

Purpleheart Easter Egg - 1st time on the lathe!
By: Jen's Woodworking & Things
April 21, 2019 · 106 views

This is my first time ever using a lathe. Don't copy my methods. I have no idea what I'm doing and spend a good part of this video just trying out the different tools to see how they work for me. I'm probably doing lots wrong, but I'm thrilled with the egg I made. Bonus Easter paperweight in the final pix. If you're a maker, and you'd like to be part of a project I plan to make when I hit my 1 year youtube anniversary, I'd love if you'd send me a pen size blank (0.75'x0.75'x5' or bigger) of wood, resin, or similarly turnable, sandable material along with your name and media info. The plan is that it represent the YT/Insta/FB maker community. I'm also making a sticker board, and would love to trade! StringsNBlingz Jen's Woodworking&Things P.O. Box 25314 Rochester, NY 14625 Instagram: @Jens Woodworking Music: Drug Tax - Fruit Flowers from www.freemusicarchive.org

 

Woodturning a quick Easter Project
By: René Haack
April 20, 2019 · 42 views

I've turned a quick Easter project using scraps of spalted beech, I guess. It was a pretty messy piece of wood, i had laying around in my shed. And I tried out some stain to color the 'egg'. Turned out pretty nice. Happy Easter everyone! Music: www.epidemicsound.com

 

Easter Egg Thing
By: The Pohl Barn Productions
April 16, 2019 · 8,470 views

Just a quick Easter Project using left over resin and scrap Box Elder. Sticker shout outs and Starbond link and 10 % off Promo Code, PohlBarn StingsNBlings https://www.youtube.com/user/eeyore0274/featured Moonpie Creations https://www.youtube.com/channel/UCLI5Dd7feZbOShyDS-dHjQg Sponsored by Total Boat and Jamestown Distributors Find them here. use PROMO CODE POHLBARN for 20% off totalboat.com or jamestowndistributors.com Also Sponsored by Acks Abrasive Paste https://ackswoodpaste.com/ StarBond https://www.starbond.com?rfsn 2506286.9ab9e4 Promo code POHLBARN resin I use www.alumilite

 

Small Chest or Big Easter Egg? Woodturning
By: Elias Klingvall
April 14, 2019 · 3,041 views

Small chest with a segmented body made of Pine finished with pigmented Hardwax Oil, legs and knob of Oak finished with Danish Oil Liten förvarings kista gjord av furu behandlad med pigmenterad Hårdwax Olja, ben och knopps gjord av Ek behandlad med Danish Oil Gammelgarn Ängmans Snickeri Gotland

 

Another Easter Egg (Or Puzzle) For The Easter Bunny
By: As Wood Turns
April 12, 2019 · 1,332 views

http://www.AsWoodTurns.com After turning the solid egg is the last video, I wondered what other types of Easter eggs could I make for my 3D printed Easter Bunny. This Easter egg is hollow for a small treat inside. A rubber hairband holds it together since the joints are along the long section of the egg. To make this egg: 1. Tropical hardwood pen blanks are glued together with paper joints. 2. Turn the egg. Remember than an ideal egg's length is 1.29 x its diameter and the big end is a hemisphere. 3. Cut a shallow groove at the middle of the egg for the rubber hairband. 4. Sand and finish

 

Hollow Easter Egg, pierced & painted entitled 'Hearts & Flowers'
By: Miss Tee's Woodturning
April 07, 2019 · 166 views

This egg is turned from two part finished bowls I was given last year. Hollowed out, recessed & glued together they form the basis of this decorative piece. I didn't video that part of the project as I had no idea if the thing would actually work. Didn't turn too badly though, all things considered but it was a bit of a mission. First attempt at piercing too.

 

This Easter Bunny Brings Sweet Chocolate or Wood Eggs
By: As Wood Turns
April 05, 2019 · 1,645 views

http://www.AsWoodTurns.com At the Maker Space in the local public library where I was 3D printing another project, I saw a cute rabbit holding a foil wrapped egg. My immediate thought was to have the little bunny hold a wooden egg that I have turned. I managed to obtain one from the library then went home to turn the egg. The wood is a left over lamination. In a video a couple years ago, I presented what someone termed the perfect egg. (Woodturn My Eggs Easy Over Please https://youtu.be/VC1RbHQkU3Q). The bunny rabbit is 3D printed using a pattern from Thingiverse. Many public libraries have

 

Unfinished Easter Egg Project
By: Miss Tee's Woodturning
April 05, 2019 · 42 views

Entitled 'Hearts & Flowers, I should complete this project over the weekend & I'll post a video off the finished egg. Sent from my phone.

 

Woodturning - Easter Golden Goose Egg
By: William Hunt
April 04, 2019 · 3,819 views

For an Easter woodturning theme I have attempted to create a mystical gold goose egg which is illuminated internally by an LED light. This was a pilot project for a much larger piece I have I’m mind for a 6” orb later in the year. I needed to find a way to create a translucent gold appearance which could be illuminated without exposing the LED. I used mica powder for this effect which worked very well with expoxy resin. Mica powder does not distribute itself evenly and leaves a swirling effect which is translucent if you get the proportions correct. It does not take much mica powder to achi

 

Woodturning a wood and compact disc case Easter Egg.
By: Woodturning with Steve Twydell
April 03, 2019 · 3,404 views

This is the edited version of the Turn it Tuesday live show on 3/4/19. I demonstrate from start to finish how I create an Easter egg from Beech wood and compact disc cases. Using very simple techniques I show you can get great results from up-cycling. This channel is supported by Yorkshire Grit The Wood turners abrasive paste. :- http://yorkshire-grit.com/ and Crown Hand tools :- http://crownhandtools.ltd.uk/ If you would like to help with the running costs of my channel please click and tip :-) Thank you xx TIP HERE https://youtube.streamlabs.com/temple... MY MEDIA INFO Templeboy Turnings Web site and shop :- http://templeboyturnings.com/ Templeboy Turnings Facebook page :- https://www.facebook.com/TempleboyTur... Templeboy Turnings Twitter :- https://twitter.com/TempleboyTurnin Templeboy Turnings Instagram :- https://www.instagram.com/templeboytu... Templeboy Turnings patreon :- PLEASE SUPPORT MY CHANNEL HERE https://www.patreon.com/Templeboyturner

 

TURN IT TUESDAY LIVE #1 MAKING A WOOD AND CD CASE EGG !
By: Woodturning with Steve Twydell
April 02, 2019 · 473 views

Welcome to the first episode of Turn it Tuesday Live, a live show where you the viewers get to choose a weekly challenge for me to make on my lathe !! I got asked to do another CD case project, so lets kick off the live show with an Egg for Easter !! 3hr LIVE. If you would like to challenge me to make something on the lathe or you have any turning related questions you want answered send me an email to templeboyturnings@gmail.com with the header TURN IT TUESDAY !! If you would like to help with the running costs of my channel please click and tip :-) Thank you xx TIP HERE https://yout

 

Uova di Pasqua ricamate - Pierced eggs
By: Mauro il tornitore
March 29, 2019 · 328 views

A nice wooden object for the next Easter. I hope you enjoy this video, please make comments, give it a 'like' and subscribe to my channel. Thanks. Mauro Come ho realizzato alcune uova ricamate di legno per Pasqua. Spero vi sia piaciuto il video. Se ritenete di lasciare un commento, cliccare su mi piace e iscrivervi al mio canale fate una cosa gradita. Grazie. Mauro

 

356 Lay/Turn an Egg
By: Eddie Castelin
March 22, 2019 · 2,940 views

This video is about turning some wood eggs

 

Eggs come in all shapes and sizes....Bedan Practice.
By: Steve Krumanaker
March 09, 2019 · 452 views

Practicing with the Bedan, trying to make eggs. The Tokyo Craftsman Bedan practice. https://www.youtube.com/watch?v kglcgy6TgxU Brian Havens on the bedan. https://www.youtube.com/watch?v XN8Mok5MJIk

 

Woodturning - Spalted Beech Hybrid Egg
By: Matt Jordan
January 13, 2019 · 7,165 views

Spalted Beech and Resin Egg. I thought the wood was in better condition than it was, however mid way through there was too much tear out, so I ended up Stabilizing the wood. Still turned out OK though. Materials and Tools I use - https://kit.com/MattJordan

 

Making Eggs
By: Roper Woodturning
January 11, 2019 · 25 views

What do you do when it’s snowing and crappy out, get ready for the next holiday of course. Today I am starting to make eggs for Easter. Last year I waited until March to start but not this year. Also I found a cool photo editing app I’m playing around with. Wood eggs are the perfect heirloom Easter display. Eggs will be available soon on Etsy. #roperwoodturning #woodturning #woodturn #wood #woodenegg #egg #easter #harveywoodworking #robertsorbytools #gettingstartedearly #colorado #lathe #maker #makersofinsta #woodworkersofinsta #woodturnersofinsta

 

The Golden Faberge Egg
By: JL WoodWorks
January 04, 2019 · 85 views

I've been seeing all these clear and wood burl spheres so i decided to go after the golden egg look. I lost a bit of video as i had a download error but enjoy and please like and subscribe. Thank You in advance and follow me on FaceBook @ JL Woodworks

 

Ovo de pascoa - Easter egg woodturning
By: Joabe Bomfim
September 07, 2018 · 2,202 views

Mais uma peça projetada na técnica da secante, para tornearia artística em madeira.

 

Woodturning - Dinosaur Eggs (And Skew Tips!)
By: Woodturner Ky
July 27, 2018 · 1,536 views

Today we turn some little eggs from chokecherry. This is a great skew skill builder project. Give it a go! Shoutouts: Woodturning By Alan Scannell: https://www.youtube.com/channel/UCi-HPqoXqbs-61IJHEwJKyg Make Things With Rob: https://www.youtube.com/channel/UC9bx1BI5ZweN8OT8jMl4KkA My Recent Videos: Tree Cuttin', Goblet Turnin': https://www.youtube.com/watch?v 4Yl83pT0q_E Reclaimed Wood Budvase: https://www.youtube.com/watch?v ghgKPPQpyQw Emerging Goblet (Diseased Chokecherry): https://www.youtube.com/watch?v gR3spsWfVPY Wild Winged Bowl (Diseased Chokecherry): https://www.youtube.com/watch?v Kk5HZpI7xGM

 

 

Building Segmented Tornado Eggs or Balls for woodturning
By: ThePapa1947
June 26, 2018 · 198 views

This is a series of photos of tornado eggs. I show how I glue up the segments and then resaw the rings from around an inch to about 3/32 of an inch. I then stagger the joints to create the effect. I made the baltic birch resaw sled which adjust side ways to allow me to get any thickness I want. It cuts so smooth I do not need to sand the disk before glueing. I use a 14 tooth blade. There is far more cutting and gluing than turning for this type of a project. I also use a wedgie sled to cut the segments. This is also made from baltic birch plywood. As long as your wedges are made correctly you can glue all the segments at once. These segments are cut to make 18 segments per ring. I will have a video soon of cutting and gluing segments to make a bowl that I machine a raised carving on. I hope you enjoy the slide show.

 

Woodturning - Tornado Eggs and Big Lake Oregon
By: ThePapa1947
June 21, 2018 · 265 views

While camping at Big Lake in Oregon I needed something to do that involved wood turning. So I made a video on my phone of some turned eggs that are segmented to give a tornado effect. This video has photos at the start and end plus a small video of an egg spinning on my lathe. A bit shaky camera work but this is pretty new to me. I guess you can teach an old retired guy new tricks too. There is a great view of Mt. Washington which is also in Oregon right across the lake. It is a mile and half as the crow flies. It looked very cool during the thunderstorm last night.

 

Woodturning - One Big Ugly Burl into a dragon egg !!
By: Andy Phillip
June 15, 2018 · 17,270,297 views

This gnarly burl was another field find , I was planning on making a vase but wasn't confident it would stay on the lathe while hollowing as some of it was quite punky , so it ended up being quite a cool looking egg ... I filled the voids with Alumilite Amazing clear cast epoxy resin and coloured with Jacquard sapphire blue pearl ex powder. my etsy & Instagram links https://www.etsy.com/uk/shop/AndyPhillipHandmade? https://www.instagram.com/andyphillip_/ DISCLAIMER : My videos are for entertainment purposes only. When using any tools/machinery always read & understand manufacturer's guidelines & safety instructions. The methods I use may not be the safest, so please be responsible for your own safety ...

 

'Turning Eggs With A Skew' : EL-1202 (from Part II)
By: Eric Lofstrom
June 02, 2018 · 152 views

2017 Eric Lofstrom, https://www.EricLofstrom.com/ Music: Track 09) Fire Mountain: Lynn Patrick's 'Fire Mountain' album, 2012 Lynn Patrick, BMI, https://www.LynnPatrick.com/ YouTube: Lynn Patrick Music - - - - - - Executive Producer - Eric Lofstrom Associate Producer - Walt Lofstrom : Photography, Sound and Production Studio Lighting - Rich Lofstrom Lighting Consultant - JC Adamson - - - - - - To purchase videos or arrange woodturning instruction, Contact: Eric@EricLofstrom.com

 

Banksia Pod Easter Egg Box-Part 2
By: woodturningwithtim1
March 31, 2018 · 9,844 views

Time for what Tim calls 'Extreme Turning'! Using a Banksia Pod (Australia's version of a pine cone) and a little Walnut Tim creates an Easter Egg like no other. The egg is hollowed with a removable lid so goodies can be stored inside. Part 2 of 2. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

Banksia Pod Easter Egg Box-Part 1
By: woodturningwithtim1
March 31, 2018 · 11,580 views

Time for what Tim calls 'Extreme Turning'! Using a Banksia Pod (Australia's version of a pine cone) and a little Walnut Tim creates an Easter Egg like no other. The egg is hollowed with a removable lid so goodies can be stored inside. Part 1 of 2. You can find instructional DVDs, Tim’s Tools and the Elbo Hollowing Tool on the Woodturning with Tim website: http://www.woodturningwithtim.com Robust Lathes: http://www.turnrobust.com/ I am a Robust dealer (which adds nothing to your costs) and I am more than happy to help you pick out and configure your new lathe. Thompson Lathe Tools: http://thompsonlathetools.com/ These are the finest, long lasting turning tools on the market. I have used them since our first shows on PBS.

 

woodtuning: the easter egg HAPPY EASTER!!!
By: Guil The Bearded Woodworker
March 30, 2018 · 484 views

Happy happy easter everyone!! thought i might do something easter themed so i turned a gidgee egg. FACEBOOK: https://www.facebook.com/beardedwoodworker/ SEND ME YOUR STICKERS, OR SEND ME A BLANK OR WHATEVER: 'Guil Noronha the bearded woodworker' po box 353 Maitland, NSW, Australia 2320

 

Russian Burl Egg
By: Roper Woodturning
March 29, 2018 · 47 views

Making wooden eggs for Easter

 

My Easter Egg
By: The Pohl Barn Productions
March 29, 2018 · 3,723 views

Happy Easter.... This is my first attempt at this sort of thing, I've got to say that Andy Philip has the right idea. It's way easier to not talk and just do. Also head over and check out Jeffrey Dean at Wake N' Make he does some interesting and funky things.... links are below for those two. Hope you like my project It's just a bunch of scraps from other projects mixed in Epoxy Resin with Pearl Ex colors added to it. If you want to check out Andy's stuff https://www.youtube.com/channel/UCDQz4H7tz6Fwu5_5rg4W6pA check out Wake N' Make https://www.youtube.com/channel/UC1cQlDg126F8rdRJzhuqj3w/featured

 

Turning a Egg from a Australian Mallee Burl!!
By: Made by Brent
March 23, 2018 · 504 views

In this video I turn an egg from burl from Australia. It is a very dense wood. It has an amazing grain pattern. Thank you so much for watching! Please hit that like button and subscribe if you want to see more of my content! Be sure to follow me on Facebook and Instagram to see what I am up to! Facebook: https://www.facebook.com/Madebybrent/ Instagram: https://www.instagram.com/madebybrent/ My email is madebybrent@gmail.com Here are links to some of the products I use. If you buy any of them it will really help support my channel. Face shield I use: http://amzn.to/2HK8Hcb Dust mask: http://amzn.to/2pmM06U Camera: http://amzn.to/2pm44NN Tripod: http://amzn.to/2plx8G9

 

woodturning - the resin faberge egg! - Easter Came Early.
By: Nick Zammeti
March 23, 2018 · 121,904 views

MAKERS CENTRAL WEBSITE https://goo.gl/x3yVjm MY WEBSITE http://www.nzwoodturning.co.uk/ FOLLOW ME ON INSTARGRAM https://www.instagram.com/nickzammeti/?hl en MAKERS CENTRAL INSTAGRAM https://www.instagram.com/makerscentral/?hl en MAKERS CENTRAL FACEBOOK https://www.facebook.com/makerscentral/ CHARLIE THE MAKER (My little boys channel) https://www.youtube.com/channel/UClU3oIHFJwi4_UF-l_Lc7cw THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.r

 

woodturning # 105 textured, Easter egg
By: Woodslee Summercraft
March 16, 2018 · 2,410 views

Honestly this is the first time i turned an egg, it just never really interested me, but it turned out to be a quick easy turn with a little added effect with the use of texture, Hampshire sheen C wax and Ti wax., of course i used Yorkshire grit. visit my website for these products in Canada http://www.woodsleesummercraft.ca

 

Easter Egg Between Centres - Episode 120
By: Paul Lockwood
March 06, 2018 · 621 views

First of a short series this month on a Wednesday covering simple Easter Projects. Using a piece of Spalted Silver Birch I found at the local Tarn, the whole process was made between centres, so ideal if you do not have a chuck. Most of the shape was done with a spindle gouge. However there was a fair amount of tear out so had to take the final cuts with the skew to get a much better finished surface. Sanded to 400 grit, then a quick bit of pyrography using my Peter Childs Pyrography machine. Finished off with some sanding sealer and then buffed up using a buffing wheel on the lathe. You c

 

TUTORIAL 4: Egg Box n Base
By: CL Woodturning
February 22, 2018 · 267 views

Nice little project ready for Easter...including outtakes at the end lol ...

 

103 - Woodturning - Lignum Vitae Egg
By: Roweville Retro
January 12, 2018 · 139 views

Quick video of turning an easter egg from lignum vitae. Music from http://www.gosoundtrack.com, under Creative Commons Attribution License: https://creativecommons.org/licenses/by/4.0

 

Segmented Wood Eggs - Tornado Pattern - Part 3 - Turning the Segmented Egg on the Lathe
By: SIS Woodworking
October 13, 2017 · 1,926 views

This is part 3 of 3 videos describing the production of Segmented Wood Eggs - designed with the tornado pattern. This video-Part 3 - describes the final glue up of the segmented disc layers, turning the egg on the lathe and the final finishing of the segmented egg. Details at www.accu-slice.com

 

Segmented Wood Eggs - Tornado Pattern - Part 2 - Gluing the Segmented Ring Layers using Epoxy
By: SIS Woodworking
October 13, 2017 · 1,625 views

This is part 2 of 3 videos describing the production of Segmented Wood Eggs - designed with the tornado pattern. This video-Part 2 - describes the gluing up of the segmented disc layers using epoxy cement to produce the tornado pattern segmented discs. Details at: www.accu-slice.com

 

Segmented Wood Eggs - Tornado Pattern - Part 1 - Design & Production of the Segmented Rings
By: SIS Woodworking
October 12, 2017 · 3,112 views

This is part 1 of 3 videos describing the production of Segmented Wood Eggs - designed with the tornado pattern. This video-Part 1 - describes the design of the segmented wood eggs, producing the segmented wedges, gluing the segmented discs and slicing the thin layers of the segmented discs which will be arranged to produce the tornado pattern. Details at www.accu-slice.com

 

015-03-03 WWRJF - Turning a hollow egg - Day 2 Finishing 41 min 2014
By: Richard Ford
August 16, 2017 · 28 views

Day 2 - Finish each half of the egg, then turn the outside with the halves together Remember you can fast forward through stuff you don't want to see. Originally Uploaded Jun 14, 2014 470 Views

 

015-02-03 WWRJF - Turning a hollow egg - Day 1 Roughing 24 min 2014
By: Richard Ford
August 16, 2017 · 78 views

015-02-03 WWRJF - Turning a hollow egg - Day 1 Roughing 24 min 2014 Day 1 - Roughing out both haves of the egg, leaving a witness of the tenon diameter on both. Remember you can fast forward through stuff you don't want to see. Originally Uploaded Jun 14, 2014 567 Views

 

015-01-03 WWRJF - Turning a hollow egg - Intro 4 min 2014
By: Richard Ford
August 16, 2017 · 31 views

This video documents the method I use to turn a Hollow Egg. Remember you can fast forward through stuff you don't want to see. Originally Uploaded Jun 14, 2014 615 Views

 

How To Make A Dragon Egg / Lichtenberg burner / Woodworking Project
By: Carl Jacobson
July 14, 2017 · 21,864 views

I turned this Dragon egg from a piece of reclaimed Cedar I got at my local restoration store. I used a Lichtenberg burner to add some detail. Game of Thrones season 7 starts this weekend. I put together a list of some of the tools I use in my shop (affiliate) link for my Amazon Store, if you'd like to support what I do, shop through this link: https://www.amazon.com/shop/thewoodshoptv My Etsy shop: https://www.etsy.com/shop/Thewoodshoptv Patreon: https://www.patreon.com/CarlJacobson Website http://www.thewoodshop.tv/ Instagram: https://www.instagram.com/carljacobson/ Facebook https://www.f

 

Turning an Egg
By: Peaceful Woodturner
June 25, 2017 · 382 views

Turning an egg from pine

 

Turning 28 Captive Rings on Wood Egg
By: Gabor Aron Fetyko
June 01, 2017 · 167 views

https://youtu.be/R4xpvhZQ6tQ

 

Resin Art - Orb or Egg ?? Fail or Fix
By: Andy Phillip
May 18, 2017 · 16,509 views

Turning an Orb or Egg ?? from leftover resin Mario Bava Sleeps In a Little Later Than He Expected To by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://chriszabriskie.com/vendaface/ Artist: http://chriszabriskie.com/ my etsy & Instagram links https://www.etsy.com/uk/shop/AndyPhillipHandmade? https://www.instagram.com/andyphillip_/ DISCLAIMER : My videos are for entertainment purposes only. When using any tools/machinery always read & understand manufacturer's guidelines & safety instructions. The methods I use may not be the safest, so please be responsible for your own safety ...

 

Producing Turned Wood Eggs with Celtic Ring Inserts
By: SIS Woodworking
May 03, 2017 · 2,403 views

The procedures are described to make some turned wooden eggs with complex Celtic Ring or Celtic Knot patterns. The process begins with the slicing of the insert kerfs into a Cherry wood block on a band saw and then gluing thin wood inserts of a contrasting wood into the kerfs. The wood eggs are then turned on a lathe to produce the complex Celtic ring pattern eggs.

 

drechseln von 2 elliptischen Eierbechern, elliptic eggshell DIY
By: Woodturning F-Z
April 15, 2017 · 2,747 views

herstellen eines extra Futters um 2 Elliptische Eierbecher ( Serviettenring) gleichzeitig zu drechseln making a chuck that can hold 2 elliptic eggshell on the Lathe

 

Ξυλότορνος - Κατασκευή πασχαλινού αυγού / Woodturning - an easter egg
By: Kostas Annikas Deftereos
April 15, 2017 · 1,769 views

Προσπαθούσα μέρες να σκεφτώ τι να ανεβάσω αυτή την ήμερα άλλα ευτυχώς ο φίλος ο Αντώνης μου θύμισε ότι δεν έχω ανεβάσει ένα πασχαλινό αυγό ! και έτσι έφτιαξα αυτό το βίντεο ελπίζω να σας αρέσει !!!! Aν θέλετε μπορείτε να με βρείτε και στις παρακάτω σελίδες ! facebook : https://www.facebook.com/annikas8 instagram : https://www.instagram.com/kostas_annikas_deftereos/ google : https://plus.google.com/u/0/ KostasAnnikasDeftereos Η μουσική είναι μια πρόσφορα από τους way light creations μπορείτε να μπείτε στο site τους και να κατεβάσετε δωρεάν μουσική : http://waylightcreations.com η να δείτε τις όμορφες κατασκευές τους στο youtube : https://www.youtube.com/channel/UC38CQXaEkI4k_sQCIZOJJ0Q

 

MAKING AN EASTER EGG FROM A TABLE LEG!
By: Nick Zammeti
April 14, 2017 · 28,659 views

MOST ITEMS I MAKE ARE ON MY WEBSITE http://www.nzwoodturning.co.uk/ MY NZ WOODTURNING EMBLEMS http://www.ruddmacnamara.com/ THE RESIN I USE IS FROM HERE http://www.ebay.co.uk/usr/aktiniumltd http://www.resin4art.com/ YORKSIRE GRIT http://yorkshire-grit.com/ MY LATHE, SANDER & BAND SAW IS FROM RECORD POWER http://www.recordpower.co.uk/ ………………………………………………………………………………………………………………………………………………………. PLEASE NOTE: IF YOU ARE SENDING ME SOMETHING, PLEASE COULD YOU PLACE A LOW VALUE ON THE PACKAGE YOU ARE SENDING. THANK YOU. ………………………………………………………………………………………………………………………………………………………. SEND ME STUF

 

Woodturning with Tim Yoder-Glow-In-The-Dark Easter Egg
By: woodturningwithtim1
April 05, 2017 · 49,437 views

Using a glow in the dark powder, jewelers epoxy and a beautiful piece of Maple Burl...Tim shows you how to make a glow-in-the-dark Easter Egg. But watch out! Tim has his own unusual visitor in this show. Woodturning with Tim Yoder: www.wtwtim.com Robust Lathes: www.turnrobust.com Thompson Lathe Tools: www.hompsonlathetools.com ICE Resin: https://www.amazon.com/gp/product/B00HQP2YK6/ref oh_aui_detailpage_o00_s01?ie UTF8&psc 1 Glow Inc. Glow Powder: https://www.amazon.com/gp/product/B00BNEX96Y/ref oh_aui_detailpage_o00_s00?ie UTF8&psc 1 Bunny: https://www.amazon.com/Toy-Vault-Rabbit-Plush-Pointy/dp/B0006JGNB0/ref sr_1_1?s arts-crafts&ie UTF8&qid 1491418815&sr 8-1&keywords monty python bunny

 

Dekoratives Oster Ei drechseln
By: Hobbydrechsler Thomas Pfahler
March 16, 2017 · 7,129 views

In diesem Video möchte ich euch zeigen wie ein dekoratives Oster Ei aus gestocktem Buchen Holz entsteht, ich hoffe das Video gefällt euch :-)

 

Wooden Cackleberries - Turning a couple of Darning Eggs
By: Fatso's Workshop
February 23, 2017 · 235 views

I was asked the other day about making up some darning eggs, they're used by sock knitters to put in socks when sewing up the toes or fixing them up. I had a bit of a look around and they didn't seem too bad so I thought I'd have a go. The first one I did was in oak which was a bit hard to turn easily but these I've done in maple, which turns up a treat. I think I need a bit more practice to get the shape right which is where I'm finding it a fun project. Also a good project to practice with the skew chisel, which usually doesn't get used much on my lathe apart from dovetailing the mortises on the bowls. I'm resisting the urge to fill this video with egg puns..... Music: Easy to Love by the AK-47 Big Band https://archive.org/details/ca483_ak/03-easyToLove.mp3

 

Another Shaker Egg
By: Jerry Paul
February 09, 2017 · 949 views

I tried to do a better job on this one, and I think I did. There is still a little gap at the joint where the 2 halves come together, but I scored it and filled it with the only stuff I had laying around the shop. ... Still not quite the best, but they're getting better every time. There's less talk on this video too, because I got sick of listening to my incessant rambling/mumbling while editing. lol

 

Woodturning a Shaker Egg
By: Jerry Paul
January 27, 2017 · 4,118 views

I turned a percussion instrument. A shaker egg. ... Not my best work, but it was fun to turn, and it sounds nice. I'll be making more of these, if only to redeem myself for my failings on this one. lol

 

Huevo de Dragon en Nogal, Parte 3 (base y patas)
By: Daniel Vilarino
October 03, 2016 · 6,438 views

Hola/Hi! ***This video is in Spanish, if you prefer to watch it in English, please click here:*** https://youtu.be/vVux6pAQ1EI Este video está en Español Esta es la tercera y última parte del proyecto del huevo de dragón. En este tercer episodio, realizo la base de apoyo en nogal con sus patas en chak te koke. ***This is the third and last part of the dragon egg project. In this third episode I make the walnut base as well as the red heart legs.*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a mi canal. ***I hope y

 

Walnut Dragon Egg Part 3 (base and legs)
By: Daniel Vilarino
October 03, 2016 · 1,455 views

Hola/Hi! Este video está en Inglés, si prefieres verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/ZKezWhIv9OE ***This video is in English*** Esta es la tercera y última parte del proyecto del huevo de dragón. En este tercer episodio, realizo la base de apoyo en nogal con sus patas en chak te koke. ***This is the third and last part of the dragon egg project. In this third episode I make the walnut base as well as the red heart legs.*** Ojalá que hayan disfrutado de este video y si fue así, por favor realicen comentarios, dénle un 'me gusta' y suscríbanse a m

 

Huevo de Dragon en Nogal, Parte 2, el Tirador
By: Daniel Vilarino
September 23, 2016 · 7,232 views

Hola/Hi! ***This video is in Spanish, if you want to watch it in English, please click in the following link:*** https://youtu.be/ANa9HWH7ZKo Este video está en Español. Este es el segundo episodio de una serie de tres en los que estoy construyendo un huevo de dragón con tirador y base con patas. En el primer episodio había hecho la caja con forma de huevo con una pieza de Nogal. En este episodio muestro como hacer el tirador o puntero con forma de cola de dragón en Chak Te Koke. En un tercer episodio mostraré como hacer la base y las patas de la misma para sostener todo el conjunto. ***This

 

Walnut Dragon Egg, Part 2, the finial
By: Daniel Vilarino
September 23, 2016 · 1,344 views

Hola/Hi! Este video está en Inglés, para verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/Y3O5iSJ231s ***This video is in English*** Este es el segundo episodio de una serie de tres en los que estoy construyendo un huevo de dragón con tirador y base con patas. En el primer episodio había hecho la caja con forma de huevo con una pieza de Nogal. En este episodio muestro como hacer el tirador o puntero con forma de cola de dragón en Chak Te Koke. En un tercer episodio mostraré como hacer la base y las patas de la misma para sostener todo el conjunto. ***This is

 

Huevo de Dragon en Nogal, Parte 1
By: Daniel Vilarino
September 14, 2016 · 19,990 views

Hola/Hi! ***This video is in Spanish, if you would like to watch it in English, please click in the following link:*** https://youtu.be/_k11fu0Ou8I Este video está en Español. Este es el primero de una serie de dos videos en la cual haré un huevo de dragón en Nogal. En este me dedico a hacer la caja con forma de huevo, en un video posterior haré el tirador y la base. ***This is the first of a series of two videos in which I will make a walnut Dragon egg. In this part 1 I make the box with the egg shape, and in the next video I will make the finial and the base.*** Enlace para el canal de Yo

 

Walnut Dragon Egg Part 1
By: Daniel Vilarino
September 14, 2016 · 2,019 views

Hola/Hi! Este video está en Inglés, si prefieres verlo en Español, por favor haz un click en el siguiente enlace: https://youtu.be/DMB3gmbNGsM ***This video is in English*** Este es el primero de una serie de dos videos en la cual haré un huevo de dragón en Nogal. En este me dedico a hacer la caja con forma de huevo, en un video posterior haré el tirador y la base. ***This is the first of a series of two videos in which I will make a walnut Dragon egg. In this part 1 I make the box with the egg shape, and in the next video I will make the finial and the base.*** Enlace para el canal de You

 

Woodturning a 2' Egg in very dry pippy Yew - full real time video
By: woodturner21
March 09, 2016 · 8,262 views

It takes about the same time to turn as hard boil an Egg

 

My Woodturning Recipe For Deviled Eggs
By: As Wood Turns
April 30, 2015 · 3,543 views

http://www.AsWoodTurns.com Since spring has arrived, it's time for picnics and barbecues. How about some deviled eggs for those occasions? I used the split turning technique for this project. 1. Glue two pieces of walnut together with brown craft paper between. 2. Turn an egg then split it into two halves. 3. Turn the deviled yolk and glue it to the half egg. 4. Proudly serve your deviled eggs at the next appropriate occasion. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

easteregg1
By: Jerry Paul
April 02, 2015 · 504 views

A dragon's egg for Easter! Its a chunk of maple from a tree in my back yard. The wood is sopping wet and I'm interested to see if it will 'hatch'.

 

Easter Eggs in Wood: Textured and Colored... by Sam Angelo
By: WYOMINGWOODTURNER
March 31, 2015 · 11,104 views

Sam turns, colors, and applies texture to 3 wooden eggs. He also turns egg cups for each. In part two Sam covers the making of the 3 egg cups.

 

How to Turn an Easter Egg
By: Mike Peace Woodturning
March 22, 2015 · 27,499 views

I demonstrate how to wood turn a wooden egg. I use a simple template to measure the initial woodturning blank and to mark the egg length to yield an egg about 1 5/8” X 2 3/8”. You can download his egg handout with my full size template from my website http://www.MikePeaceWoodturning.com Check out my website for other demonstration handouts, downloadable copies of articles I have published, and links to other woodturning content.

 

Woodturn My Eggs Easy Over Please
By: As Wood Turns
March 19, 2015 · 8,552 views

http://www.AsWoodTurns.com This project is a fun way to use up scraps and please both the grandkids and their parents. This time, I'll use a egg chuck derived from work done by Vern Bunn. The main difference is that I've mounted mine to a threaded wood faceplate to avoid using my 4 jaw chuck. According to Ron Washall, the perfect egg is a series of arcs: one describes the bottom, the big end; 2 identical arcs define the sides; and one more describes the top. However, you will never find a 'perfect' egg. They are all different. But, calculating from his description, the perfect length for an eg

 

Woodturning: Full Egg Making Process HD
By: duunari81
December 21, 2014 · 42,803 views

Turning, sanding and finishing. Wood is elm.

 

Woodturning: Egg Shape Training HD
By: duunari81
December 15, 2014 · 39,837 views

Sometimes I make few eggs just for training. Material in this case is spruce.

 

Whoops! My Wood Egg Cracked Or Hatched?
By: As Wood Turns
October 11, 2014 · 2,327 views

http://www.AsWoodTurns.com In this video, I started out to make an egg shaped mold or pattern for cast glass. Several things went wrong but were not critical until I got a nasty catch when finishing the top of the egg. At that point, the egg's base cracked off its remaining tenon leaving a big hole in the bottom. What was I to do? Following the example of great woodturners before me, I adapted the design. It not became the remnants of a hatched egg. I don't know where the baby bird it! This egg is about 5 inches long and 3 inches in diameter. It is dyed black and finished with friction polish. Enter your email at http://www.AsWoodTurns.com & I'll let you know when the next easy woodturning project video is ready. Blog: http://www.AsWoodTurns.com FB: http://www.Facebook.com/AsWoodTurns

 

Wood Turning #76 Texted Egg Cup
By: The Tiny Trailer Workshop
June 06, 2014 · 488 views

Wood Turning #76 Egg Cup I hadn't done a normal egg cup so I thought it was high time I did! This piece of Arbutus had a few cracks in it elsewhere... but I seemed to have dodged the bullet on this one! I am always amazed by the difference in colour between green and seasoned wood... green this would be almost white! This was designed with the farm fresh eggs in mind... it might be a little large for regular store bought eggs! I thought I would add the transcript of the video in case it made it easier for translation to have a text file as well... Hello and welcome to the Tiny Trailer Worksho

 

Wood Turning #76 Egg Cup
By: The Tiny Trailer Workshop
June 06, 2014 · 3,057 views

Wood Turning #76 Egg Cup I hadn't done a normal egg cup so I thought it was high time I did! This piece of Arbutus had a few cracks in it elsewhere... but I seemed to have dodged the bullet on this one! I am always amazed by the difference in colour between green and seasoned wood... green this would be almost white! This was designed with the farm fresh eggs in mind... it might be a little large for regular store bought eggs! I thought I would add the transcript of the video in case it made it easier for translation to have a text file as well... Hello and welcome to the Tiny Trailer Worksho

 

Wood Turning #63 An Off Kilter Egg Cup
By: The Tiny Trailer Workshop
April 11, 2014 · 10,602 views

This is an exercise in camera learning skills! I am afraid that I zoomed in the camera to do one shot... and forgot to zoom back out again! And now as I upload this... it tells me up top there that this is going to take 1545 minutes... no make that 2147! And I am all the way up to 2%!! So who knows how long this will take... but when it finally gets there... I thank you for watching! It says that I uploaded it on the 10th, but it is 7:30am on the 11th and I am only just now able to check it to see!

 

Uovo di olivo al tornio - Olive wood egg on the lathe
By: Mauro il tornitore
March 12, 2014 · 1,173 views

Come realizzare un uovo di olivo al tornio - How I make an olive wood egg on the lathe

 

#19 3 Egg Timelessness
By: The Tiny Trailer Workshop
October 19, 2013 · 493 views

This is the conclusion of the 3 Egg Timelessness. I guess the only thing really in the name is that they are not egg timers... and the word looked neat! The woods used here are Base Apple Outer Egg Alder Middle Egg Hemlock Inner Egg Padauk Like I said in the last video intro... I would love to see how you have taken this idea and run with it! I thank you for taking the time to watch and I hope to be able to come up with something new for next week... well I am already working on that ... Take care Larry

 

#18 3 Egg Timelessness
By: The Tiny Trailer Workshop
October 18, 2013 · 287 views

This is a two part excercise in Geometry that has nothing to do with geometry! It might even be more of a Halloween type project... the electric tea light that I got was an item from the dollar store... it was for putting in your pumkins... and they were 2 for 1.25 (CAN)... and so this would look good sitting in a window for the Trick or Treaters! My skills at joinery are not the best, so I am sure that many of you out there could do a much better job than I have done here. As a matter of fact... the first one I saw done was quite a bit bigger and that may make it easier too? I don't know... I hope some of you give this a try...I would love to see what you see in the wood! Thanks for watching Larry

 

WoodTurning - Project turning a Support for eggs
By: Confusion Wood
March 14, 2013 · 12,038 views

WoodTurning - Project turning a Support for eggs of oak http://www.youtube.com/subscription_center?add_user ConfusionWood my channel: http://youtube.com/ConfusionWood

 

Turning a wooden Egg in one minute
By: Eugen Schlaak
March 07, 2013 · 5,287 views

Enjoy and some day I make a proper video

 

Tournage sur bois d'un un coquetier style Louis XV Woodturning an egg a Louis XV style
By: Laurent Cortot
June 17, 2012 · 6,479 views

La vidéo est accélérée X5 Mon blog: http://lolotourneur.blogspot.com

 

Tournage sur bois d'un Å“uf - Wood Turning - An Egg
By: Laurent Cortot
March 08, 2012 · 10,453 views

Mon blog: http://lolotourneur.blogspot.com/ Tournage d'un œuf en noyer A partir de 1,30mn la vidéo est en vitesse X2

 

wood egg
By: Gabor Aron Fetyko
June 07, 2011 · 10,667 views

my grandfather and my father working together turning a wood egg from plum trunk.

 

Woodturning - Another Egg
By: teksu313
May 19, 2011 · 4,252 views

Another egg turning video. I found some of my old clips and tested my new video editing software with those. The editing software worked well.

 

Woodturning a egg
By: mats persson
March 25, 2011 · 1,339 views

Woodturning an egg as a skew training project.

 

Woodturning - Egg
By: teksu313
August 11, 2010 · 4,857 views

Egg from Common Juniper wood (Juniperus communis)

 

Woodturning: Wooden Egg
By: duunari81
December 18, 2008 · 84,404 views

An egg made of wood.

 

Return to Turning Videos

Great Bargains
(ends November 27, 2019)


Customized Electric Branding Iron

On Sale for only $99.99

Save $20.00

List price: $119.99

This customized, 110V electric branding iron will let you imprint your woodturnings in way that will never fade away. You will be able to order from fifteen different standard-size design choices, enter your custom text and proof the final design. The delivery of your custom burning head will take 2 - 3 weeks.

Click here for more information or to purchase

 


Rockler Mini Carbide Pen Turning Tools

On Sale for only $149.99

Save $70.00

List Price: $219.99

This three piece set has comfortable rubber handles which provide excellent control and reduce fatigue—replaceable carbide tips require no sharpening. The 3-piece sets comes with diamond, square and round carbide tipped tools.

Click here for more information or to purchase

 


Bar Tool Turning Kits

Get the 5 Piece Set for only $68.95

Save $15.00

Everything you need to turn out cocktails that friends will rave about—includes all five of their Bar Tool Turning Kits in one cost-saving package. Includes: bottle opener, double jigger, muddler bar, bar spoon, cocktail strainer and 5 threaded inserts.

Click here for more information or to purchase


Pen Press/Drilling Jig

For only $89.99

Save $10.00

List Price: $99.99

Drill and assemble your pens perfectly with flush fittings and a smoothly-operating mechanism! This dual-purpose jig takes care of both prep work and assembly. It holds your blank firmly in position for drilling, creating a precise, perfectly centered hole the entire length of the pen. Later, it smoothly presses your parts together without any bowing or misalignment. Notched jaws automatically center the blank for drilling, while two countersunk holes center the parts during assembly. Large clamping wheel provides slow, controlled pressure so you'll never crack a casing again.

Click here for more information or to purchase


Trend® Air Circulating Airshield Pro

For only $369.99

Save $30.00

List Price: $399.99

Protect your lungs, face and eyes during virtually any woodworking task with the air-circulating Trend® Airshield Pro. Its built-in fan circulates filtered air to prevent fogging, provide cooling and protect users from dust particulates down to 0.6 microns in size at a 98% efficiency rate. This model also meets ANSI Z87+ standards for eye-protection. It features an improved headband with a ratchet suspension and pivoting nape back strap for enhanced comfort, fit and durability. The nickel metal hydride battery allows for up to eight hours of operation on a full charge, twice the length of previous models. Includes a charger, airflow indicator and pre-installed plastic film overlay to prevent buildup of sap after heavy turning jobs, and to prevent scratching.

Click here for more information or to purchase

Great Bargains
(ends December 24, 2019)


Denim Woodturner's Apron

On Sale for only $17.99

Save $12.00

List price: $29.99

This is a one-size fits all, heavy duty denim apron with a soft-cloth collar and criss-cross shoulder straps. It even includes a pencil pocket.

Click here for more information or to purchase

 


Starter Pen Turning Kit

On Sale for only $59.99

Save $10.00

List Price: $69.99

This kit contains all the essential tooling you need to start turning custom pens. It includes three pen blank species (bloodwood, bubinga and olivewood), three gold-plated Slimline Twist Pen Hardware Kits, a 7mm mandrel with knurled nut and #2 Morse Taper, 7mm bushings, a 7mm Brad Point Drill Bit, a 1 oz. bottle of CA Glue, a Pen Mill Kit for truing up all mating surfaces and a storage case with 28 adjustable compartments. The Pen Mill includes four pilot shaft sizes for a wide range of pen types.

Click here for more information or to purchase

 


Sorby 6-Piece Woodturning Set with Book and DVD (Woodturning: A Foundation Course)

For only $229.99

Save $100.00

List Price: $329.99

Robert Sorby's flagship set of turning tools is designed to fill the needs of woodturners from beginner to professional. These high-quality tools will shorten the learning curve for those just starting out, and are sure to impress the seasoned woodturner. The set comprises six of Robert Sorby's core range of tools: a roughing gouge, spindle gouge, bowl gouge, skew, parting tool and scraper. Each tool is crafted from the highest quality high speed steel, and married to a comfortable handle turned from solid ash. The set arrives in a high quality box that provides an attractive presentation as a gift, and practical storage thereafter.

Click here for more information or to purchase


Dust Right® Lathe Dust Collection System

For only $39.99

Save $20.00

List Price: $59.99

This highly adjustable steel boom arm holds a semi-cylindrical dust scoop that closely cups your small turning projects, capturing nearly all dust!

Click here for more information or to purchase


Excelsior Mini Lathe

For only $229.99

Save $70.00

List Price: $299.99

The Excelsior 5-Speed Mini Lathe can turn bowls of almost 10" in diameter and spindles up to 17-3/4" in length, making it perfect for chair legs, small table legs and an endless array of decorative turnings. A convenient door provides easy access to the belt, along with 5 different speeds: 760, 1100, 1600, 2200 and 3200 RPM. Cast-iron body provides mass for minimal vibration, stable turning and maximum durability.

Click here for more information or to purchase

Powered by Google

Our Monthly Update

We update our home page about monthly to feature a new project, a new article, and a new and hot tool. Then we send an email to alert our subscribers.
We never let anyone use our list, and our subscribers have been wonderfully loyal as a result.

We hope you will try it out!

Sign Up For Our Newsletter

A Sampling of our Sponsors:
(Visit the Vendor's Corner above to see all our sponsors)

Saburrtooth
Woodturner's Tools
Arizona Carbide

(Click any Ad to go to our Sponsor's Website)